diff options
author | Ingo Molnar <mingo@kernel.org> | 2015-05-28 12:21:47 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@kernel.org> | 2015-06-02 07:57:48 +0200 |
commit | 131484c8da97ed600c18dd9d03b661e8ae052df6 (patch) | |
tree | 18293a131e8a40a9a339734259a74d33cbba1186 /arch/x86 | |
parent | x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers (diff) | |
download | linux-131484c8da97ed600c18dd9d03b661e8ae052df6.tar.xz linux-131484c8da97ed600c18dd9d03b661e8ae052df6.zip |
x86/debug: Remove perpetually broken, unmaintainable dwarf annotations
So the dwarf2 annotations in low level assembly code have
become an increasing hindrance: unreadable, messy macros
mixed into some of the most security sensitive code paths
of the Linux kernel.
These debug info annotations don't even buy the upstream
kernel anything: dwarf driven stack unwinding has caused
problems in the past so it's out of tree, and the upstream
kernel only uses the much more robust framepointers based
stack unwinding method.
In addition to that there's a steady, slow bitrot going
on with these annotations, requiring frequent fixups.
There's no tooling and no functionality upstream that
keeps it correct.
So burn down the sick forest, allowing new, healthier growth:
27 files changed, 350 insertions(+), 1101 deletions(-)
Someone who has the willingness and time to do this
properly can attempt to reintroduce dwarf debuginfo in x86
assembly code plus dwarf unwinding from first principles,
with the following conditions:
- it should be maximally readable, and maximally low-key to
'ordinary' code reading and maintenance.
- find a build time method to insert dwarf annotations
automatically in the most common cases, for pop/push
instructions that manipulate the stack pointer. This could
be done for example via a preprocessing step that just
looks for common patterns - plus special annotations for
the few cases where we want to depart from the default.
We have hundreds of CFI annotations, so automating most of
that makes sense.
- it should come with build tooling checks that ensure that
CFI annotations are sensible. We've seen such efforts from
the framepointer side, and there's no reason it couldn't be
done on the dwarf side.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'arch/x86')
27 files changed, 350 insertions, 1101 deletions
diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 57996ee840dd..43e8328a23e4 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -149,12 +149,6 @@ endif sp-$(CONFIG_X86_32) := esp sp-$(CONFIG_X86_64) := rsp -# do binutils support CFI? -cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1) -# is .cfi_signal_frame supported too? -cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1) -cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1) - # does binutils support specific instructions? asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1) asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1) @@ -162,8 +156,8 @@ asinstr += $(call as-instr,crc32l %eax$(comma)%eax,-DCONFIG_AS_CRC32=1) avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1) avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1) -KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) -KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) +KBUILD_AFLAGS += $(asinstr) $(avx_instr) $(avx2_instr) +KBUILD_CFLAGS += $(asinstr) $(avx_instr) $(avx2_instr) LDFLAGS := -m elf_$(UTS_MACHINE) diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 63450a596800..2be23c734db5 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -4,7 +4,6 @@ * Copyright 2000-2002 Andi Kleen, SuSE Labs. */ -#include <asm/dwarf2.h> #include <asm/calling.h> #include <asm/asm-offsets.h> #include <asm/current.h> @@ -60,17 +59,6 @@ movl %eax,%eax /* zero extension */ .endm - .macro CFI_STARTPROC32 simple - CFI_STARTPROC \simple - CFI_UNDEFINED r8 - CFI_UNDEFINED r9 - CFI_UNDEFINED r10 - CFI_UNDEFINED r11 - CFI_UNDEFINED r12 - CFI_UNDEFINED r13 - CFI_UNDEFINED r14 - CFI_UNDEFINED r15 - .endm #ifdef CONFIG_PARAVIRT ENTRY(native_usergs_sysret32) @@ -102,11 +90,6 @@ ENDPROC(native_usergs_sysret32) * with the int 0x80 path. */ ENTRY(ia32_sysenter_target) - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,0 - CFI_REGISTER rsp,rbp - /* * Interrupts are off on entry. * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, @@ -121,25 +104,21 @@ ENTRY(ia32_sysenter_target) movl %eax, %eax movl ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d - CFI_REGISTER rip,r10 /* Construct struct pt_regs on stack */ - pushq_cfi $__USER32_DS /* pt_regs->ss */ - pushq_cfi %rbp /* pt_regs->sp */ - CFI_REL_OFFSET rsp,0 - pushfq_cfi /* pt_regs->flags */ - pushq_cfi $__USER32_CS /* pt_regs->cs */ - pushq_cfi %r10 /* pt_regs->ip = thread_info->sysenter_return */ - CFI_REL_OFFSET rip,0 - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rcx /* pt_regs->cx */ - pushq_cfi $-ENOSYS /* pt_regs->ax */ + pushq $__USER32_DS /* pt_regs->ss */ + pushq %rbp /* pt_regs->sp */ + pushfq /* pt_regs->flags */ + pushq $__USER32_CS /* pt_regs->cs */ + pushq %r10 /* pt_regs->ip = thread_info->sysenter_return */ + pushq %rax /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + pushq %rsi /* pt_regs->si */ + pushq %rdx /* pt_regs->dx */ + pushq %rcx /* pt_regs->cx */ + pushq $-ENOSYS /* pt_regs->ax */ cld sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 10*8 /* * no need to do an access_ok check here because rbp has been @@ -161,8 +140,8 @@ sysenter_flags_fixed: orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - CFI_REMEMBER_STATE jnz sysenter_tracesys + sysenter_do_call: /* 32bit syscall -> 64bit C ABI argument conversion */ movl %edi,%r8d /* arg5 */ @@ -193,14 +172,12 @@ sysexit_from_sys_call: */ andl $~TS_COMPAT,ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) movl RIP(%rsp),%ecx /* User %eip */ - CFI_REGISTER rip,rcx RESTORE_RSI_RDI xorl %edx,%edx /* avoid info leaks */ xorq %r8,%r8 xorq %r9,%r9 xorq %r10,%r10 movl EFLAGS(%rsp),%r11d /* User eflags */ - /*CFI_RESTORE rflags*/ TRACE_IRQS_ON /* @@ -231,8 +208,6 @@ sysexit_from_sys_call: */ USERGS_SYSRET32 - CFI_RESTORE_STATE - #ifdef CONFIG_AUDITSYSCALL .macro auditsys_entry_common movl %esi,%r8d /* 5th arg: 4th syscall arg */ @@ -282,8 +257,8 @@ sysexit_audit: #endif sysenter_fix_flags: - pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED) - popfq_cfi + pushq $(X86_EFLAGS_IF|X86_EFLAGS_FIXED) + popfq jmp sysenter_flags_fixed sysenter_tracesys: @@ -298,7 +273,6 @@ sysenter_tracesys: LOAD_ARGS32 /* reload args from stack in case ptrace changed it */ RESTORE_EXTRA_REGS jmp sysenter_do_call - CFI_ENDPROC ENDPROC(ia32_sysenter_target) /* @@ -332,12 +306,6 @@ ENDPROC(ia32_sysenter_target) * with the int 0x80 path. */ ENTRY(ia32_cstar_target) - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,0 - CFI_REGISTER rip,rcx - /*CFI_REGISTER rflags,r11*/ - /* * Interrupts are off on entry. * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, @@ -345,7 +313,6 @@ ENTRY(ia32_cstar_target) */ SWAPGS_UNSAFE_STACK movl %esp,%r8d - CFI_REGISTER rsp,r8 movq PER_CPU_VAR(cpu_current_top_of_stack),%rsp ENABLE_INTERRUPTS(CLBR_NONE) @@ -353,22 +320,19 @@ ENTRY(ia32_cstar_target) movl %eax,%eax /* Construct struct pt_regs on stack */ - pushq_cfi $__USER32_DS /* pt_regs->ss */ - pushq_cfi %r8 /* pt_regs->sp */ - CFI_REL_OFFSET rsp,0 - pushq_cfi %r11 /* pt_regs->flags */ - pushq_cfi $__USER32_CS /* pt_regs->cs */ - pushq_cfi %rcx /* pt_regs->ip */ - CFI_REL_OFFSET rip,0 - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rbp /* pt_regs->cx */ + pushq $__USER32_DS /* pt_regs->ss */ + pushq %r8 /* pt_regs->sp */ + pushq %r11 /* pt_regs->flags */ + pushq $__USER32_CS /* pt_regs->cs */ + pushq %rcx /* pt_regs->ip */ + pushq %rax /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + pushq %rsi /* pt_regs->si */ + pushq %rdx /* pt_regs->dx */ + pushq %rbp /* pt_regs->cx */ movl %ebp,%ecx - pushq_cfi $-ENOSYS /* pt_regs->ax */ + pushq $-ENOSYS /* pt_regs->ax */ sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 10*8 /* * no need to do an access_ok check here because r8 has been @@ -380,8 +344,8 @@ ENTRY(ia32_cstar_target) ASM_CLAC orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - CFI_REMEMBER_STATE jnz cstar_tracesys + cstar_do_call: /* 32bit syscall -> 64bit C ABI argument conversion */ movl %edi,%r8d /* arg5 */ @@ -403,15 +367,12 @@ sysretl_from_sys_call: andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) RESTORE_RSI_RDI_RDX movl RIP(%rsp),%ecx - CFI_REGISTER rip,rcx movl EFLAGS(%rsp),%r11d - /*CFI_REGISTER rflags,r11*/ xorq %r10,%r10 xorq %r9,%r9 xorq %r8,%r8 TRACE_IRQS_ON movl RSP(%rsp),%esp - CFI_RESTORE rsp /* * 64bit->32bit SYSRET restores eip from ecx, * eflags from r11 (but RF and VM bits are forced to 0), @@ -430,7 +391,6 @@ sysretl_from_sys_call: #ifdef CONFIG_AUDITSYSCALL cstar_auditsys: - CFI_RESTORE_STATE movl %r9d,R9(%rsp) /* register to be clobbered by call */ auditsys_entry_common movl R9(%rsp),%r9d /* reload 6th syscall arg */ @@ -460,7 +420,6 @@ ia32_badarg: ASM_CLAC movq $-EFAULT,%rax jmp ia32_sysret - CFI_ENDPROC /* * Emulated IA32 system calls via int 0x80. @@ -484,15 +443,6 @@ ia32_badarg: */ ENTRY(ia32_syscall) - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,5*8 - /*CFI_REL_OFFSET ss,4*8 */ - CFI_REL_OFFSET rsp,3*8 - /*CFI_REL_OFFSET rflags,2*8 */ - /*CFI_REL_OFFSET cs,1*8 */ - CFI_REL_OFFSET rip,0*8 - /* * Interrupts are off on entry. * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, @@ -506,15 +456,14 @@ ENTRY(ia32_syscall) movl %eax,%eax /* Construct struct pt_regs on stack (iret frame is already on stack) */ - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rcx /* pt_regs->cx */ - pushq_cfi $-ENOSYS /* pt_regs->ax */ + pushq %rax /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + pushq %rsi /* pt_regs->si */ + pushq %rdx /* pt_regs->dx */ + pushq %rcx /* pt_regs->cx */ + pushq $-ENOSYS /* pt_regs->ax */ cld sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 10*8 orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) @@ -544,7 +493,6 @@ ia32_tracesys: LOAD_ARGS32 /* reload args from stack in case ptrace changed it */ RESTORE_EXTRA_REGS jmp ia32_do_call - CFI_ENDPROC END(ia32_syscall) .macro PTREGSCALL label, func @@ -554,8 +502,6 @@ GLOBAL(\label) jmp ia32_ptregs_common .endm - CFI_STARTPROC32 - PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn PTREGSCALL stub32_sigreturn, sys32_sigreturn PTREGSCALL stub32_fork, sys_fork @@ -569,23 +515,8 @@ GLOBAL(stub32_clone) ALIGN ia32_ptregs_common: - CFI_ENDPROC - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,SIZEOF_PTREGS - CFI_REL_OFFSET rax,RAX - CFI_REL_OFFSET rcx,RCX - CFI_REL_OFFSET rdx,RDX - CFI_REL_OFFSET rsi,RSI - CFI_REL_OFFSET rdi,RDI - CFI_REL_OFFSET rip,RIP -/* CFI_REL_OFFSET cs,CS*/ -/* CFI_REL_OFFSET rflags,EFLAGS*/ - CFI_REL_OFFSET rsp,RSP -/* CFI_REL_OFFSET ss,SS*/ SAVE_EXTRA_REGS 8 call *%rax RESTORE_EXTRA_REGS 8 ret - CFI_ENDPROC END(ia32_ptregs_common) diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h index 1c8b50edb2db..0d76accde45b 100644 --- a/arch/x86/include/asm/calling.h +++ b/arch/x86/include/asm/calling.h @@ -46,8 +46,6 @@ For 32-bit we have the following conventions - kernel is built with */ -#include <asm/dwarf2.h> - #ifdef CONFIG_X86_64 /* @@ -92,27 +90,26 @@ For 32-bit we have the following conventions - kernel is built with .macro ALLOC_PT_GPREGS_ON_STACK addskip=0 subq $15*8+\addskip, %rsp - CFI_ADJUST_CFA_OFFSET 15*8+\addskip .endm .macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1 .if \r11 - movq_cfi r11, 6*8+\offset + movq %r11, 6*8+\offset(%rsp) .endif .if \r8910 - movq_cfi r10, 7*8+\offset - movq_cfi r9, 8*8+\offset - movq_cfi r8, 9*8+\offset + movq %r10, 7*8+\offset(%rsp) + movq %r9, 8*8+\offset(%rsp) + movq %r8, 9*8+\offset(%rsp) .endif .if \rax - movq_cfi rax, 10*8+\offset + movq %rax, 10*8+\offset(%rsp) .endif .if \rcx - movq_cfi rcx, 11*8+\offset + movq %rcx, 11*8+\offset(%rsp) .endif - movq_cfi rdx, 12*8+\offset - movq_cfi rsi, 13*8+\offset - movq_cfi rdi, 14*8+\offset + movq %rdx, 12*8+\offset(%rsp) + movq %rsi, 13*8+\offset(%rsp) + movq %rdi, 14*8+\offset(%rsp) .endm .macro SAVE_C_REGS offset=0 SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1 @@ -131,24 +128,24 @@ For 32-bit we have the following conventions - kernel is built with .endm .macro SAVE_EXTRA_REGS offset=0 - movq_cfi r15, 0*8+\offset - movq_cfi r14, 1*8+\offset - movq_cfi r13, 2*8+\offset - movq_cfi r12, 3*8+\offset - movq_cfi rbp, 4*8+\offset - movq_cfi rbx, 5*8+\offset + movq %r15, 0*8+\offset(%rsp) + movq %r14, 1*8+\offset(%rsp) + movq %r13, 2*8+\offset(%rsp) + movq %r12, 3*8+\offset(%rsp) + movq %rbp, 4*8+\offset(%rsp) + movq %rbx, 5*8+\offset(%rsp) .endm .macro SAVE_EXTRA_REGS_RBP offset=0 - movq_cfi rbp, 4*8+\offset + movq %rbp, 4*8+\offset(%rsp) .endm .macro RESTORE_EXTRA_REGS offset=0 - movq_cfi_restore 0*8+\offset, r15 - movq_cfi_restore 1*8+\offset, r14 - movq_cfi_restore 2*8+\offset, r13 - movq_cfi_restore 3*8+\offset, r12 - movq_cfi_restore 4*8+\offset, rbp - movq_cfi_restore 5*8+\offset, rbx + movq 0*8+\offset(%rsp), %r15 + movq 1*8+\offset(%rsp), %r14 + movq 2*8+\offset(%rsp), %r13 + movq 3*8+\offset(%rsp), %r12 + movq 4*8+\offset(%rsp), %rbp + movq 5*8+\offset(%rsp), %rbx .endm .macro ZERO_EXTRA_REGS @@ -162,24 +159,24 @@ For 32-bit we have the following conventions - kernel is built with .macro RESTORE_C_REGS_HELPER rstor_rax=1, rstor_rcx=1, rstor_r11=1, rstor_r8910=1, rstor_rdx=1 .if \rstor_r11 - movq_cfi_restore 6*8, r11 + movq 6*8(%rsp), %r11 .endif .if \rstor_r8910 - movq_cfi_restore 7*8, r10 - movq_cfi_restore 8*8, r9 - movq_cfi_restore 9*8, r8 + movq 7*8(%rsp), %r10 + movq 8*8(%rsp), %r9 + movq 9*8(%rsp), %r8 .endif .if \rstor_rax - movq_cfi_restore 10*8, rax + movq 10*8(%rsp), %rax .endif .if \rstor_rcx - movq_cfi_restore 11*8, rcx + movq 11*8(%rsp), %rcx .endif .if \rstor_rdx - movq_cfi_restore 12*8, rdx + movq 12*8(%rsp), %rdx .endif - movq_cfi_restore 13*8, rsi - movq_cfi_restore 14*8, rdi + movq 13*8(%rsp), %rsi + movq 14*8(%rsp), %rdi .endm .macro RESTORE_C_REGS RESTORE_C_REGS_HELPER 1,1,1,1,1 @@ -205,7 +202,6 @@ For 32-bit we have the following conventions - kernel is built with .macro REMOVE_PT_GPREGS_FROM_STACK addskip=0 addq $15*8+\addskip, %rsp - CFI_ADJUST_CFA_OFFSET -(15*8+\addskip) .endm .macro icebp @@ -224,23 +220,23 @@ For 32-bit we have the following conventions - kernel is built with */ .macro SAVE_ALL - pushl_cfi_reg eax - pushl_cfi_reg ebp - pushl_cfi_reg edi - pushl_cfi_reg esi - pushl_cfi_reg edx - pushl_cfi_reg ecx - pushl_cfi_reg ebx + pushl %eax + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx .endm .macro RESTORE_ALL - popl_cfi_reg ebx - popl_cfi_reg ecx - popl_cfi_reg edx - popl_cfi_reg esi - popl_cfi_reg edi - popl_cfi_reg ebp - popl_cfi_reg eax + popl %ebx + popl %ecx + popl %edx + popl %esi + popl %edi + popl %ebp + popl %eax .endm #endif /* CONFIG_X86_64 */ diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h deleted file mode 100644 index de1cdaf4d743..000000000000 --- a/arch/x86/include/asm/dwarf2.h +++ /dev/null @@ -1,170 +0,0 @@ -#ifndef _ASM_X86_DWARF2_H -#define _ASM_X86_DWARF2_H - -#ifndef __ASSEMBLY__ -#warning "asm/dwarf2.h should be only included in pure assembly files" -#endif - -/* - * Macros for dwarf2 CFI unwind table entries. - * See "as.info" for details on these pseudo ops. Unfortunately - * they are only supported in very new binutils, so define them - * away for older version. - */ - -#ifdef CONFIG_AS_CFI - -#define CFI_STARTPROC .cfi_startproc -#define CFI_ENDPROC .cfi_endproc -#define CFI_DEF_CFA .cfi_def_cfa -#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register -#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset -#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset -#define CFI_OFFSET .cfi_offset -#define CFI_REL_OFFSET .cfi_rel_offset -#define CFI_REGISTER .cfi_register -#define CFI_RESTORE .cfi_restore -#define CFI_REMEMBER_STATE .cfi_remember_state -#define CFI_RESTORE_STATE .cfi_restore_state -#define CFI_UNDEFINED .cfi_undefined -#define CFI_ESCAPE .cfi_escape - -#ifdef CONFIG_AS_CFI_SIGNAL_FRAME -#define CFI_SIGNAL_FRAME .cfi_signal_frame -#else -#define CFI_SIGNAL_FRAME -#endif - -#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__) - /* - * Emit CFI data in .debug_frame sections, not .eh_frame sections. - * The latter we currently just discard since we don't do DWARF - * unwinding at runtime. So only the offline DWARF information is - * useful to anyone. Note we should not use this directive if this - * file is used in the vDSO assembly, or if vmlinux.lds.S gets - * changed so it doesn't discard .eh_frame. - */ - .cfi_sections .debug_frame -#endif - -#else - -/* - * Due to the structure of pre-exisiting code, don't use assembler line - * comment character # to ignore the arguments. Instead, use a dummy macro. - */ -.macro cfi_ignore a=0, b=0, c=0, d=0 -.endm - -#define CFI_STARTPROC cfi_ignore -#define CFI_ENDPROC cfi_ignore -#define CFI_DEF_CFA cfi_ignore -#define CFI_DEF_CFA_REGISTER cfi_ignore -#define CFI_DEF_CFA_OFFSET cfi_ignore -#define CFI_ADJUST_CFA_OFFSET cfi_ignore -#define CFI_OFFSET cfi_ignore -#define CFI_REL_OFFSET cfi_ignore -#define CFI_REGISTER cfi_ignore -#define CFI_RESTORE cfi_ignore -#define CFI_REMEMBER_STATE cfi_ignore -#define CFI_RESTORE_STATE cfi_ignore -#define CFI_UNDEFINED cfi_ignore -#define CFI_ESCAPE cfi_ignore -#define CFI_SIGNAL_FRAME cfi_ignore - -#endif - -/* - * An attempt to make CFI annotations more or less - * correct and shorter. It is implied that you know - * what you're doing if you use them. - */ -#ifdef __ASSEMBLY__ -#ifdef CONFIG_X86_64 - .macro pushq_cfi reg - pushq \reg - CFI_ADJUST_CFA_OFFSET 8 - .endm - - .macro pushq_cfi_reg reg - pushq %\reg - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET \reg, 0 - .endm - - .macro popq_cfi reg - popq \reg - CFI_ADJUST_CFA_OFFSET -8 - .endm - - .macro popq_cfi_reg reg - popq %\reg - CFI_ADJUST_CFA_OFFSET -8 - CFI_RESTORE \reg - .endm - - .macro pushfq_cfi - pushfq - CFI_ADJUST_CFA_OFFSET 8 - .endm - - .macro popfq_cfi - popfq - CFI_ADJUST_CFA_OFFSET -8 - .endm - - .macro movq_cfi reg offset=0 - movq %\reg, \offset(%rsp) - CFI_REL_OFFSET \reg, \offset - .endm - - .macro movq_cfi_restore offset reg - movq \offset(%rsp), %\reg - CFI_RESTORE \reg - .endm -#else /*!CONFIG_X86_64*/ - .macro pushl_cfi reg - pushl \reg - CFI_ADJUST_CFA_OFFSET 4 - .endm - - .macro pushl_cfi_reg reg - pushl %\reg - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET \reg, 0 - .endm - - .macro popl_cfi reg - popl \reg - CFI_ADJUST_CFA_OFFSET -4 - .endm - - .macro popl_cfi_reg reg - popl %\reg - CFI_ADJUST_CFA_OFFSET -4 - CFI_RESTORE \reg - .endm - - .macro pushfl_cfi - pushfl - CFI_ADJUST_CFA_OFFSET 4 - .endm - - .macro popfl_cfi - popfl - CFI_ADJUST_CFA_OFFSET -4 - .endm - - .macro movl_cfi reg offset=0 - movl %\reg, \offset(%esp) - CFI_REL_OFFSET \reg, \offset - .endm - - .macro movl_cfi_restore offset reg - movl \offset(%esp), %\reg - CFI_RESTORE \reg - .endm -#endif /*!CONFIG_X86_64*/ -#endif /*__ASSEMBLY__*/ - -#endif /* _ASM_X86_DWARF2_H */ diff --git a/arch/x86/include/asm/frame.h b/arch/x86/include/asm/frame.h index 3b629f47eb65..793179cf8e21 100644 --- a/arch/x86/include/asm/frame.h +++ b/arch/x86/include/asm/frame.h @@ -1,20 +1,17 @@ #ifdef __ASSEMBLY__ #include <asm/asm.h> -#include <asm/dwarf2.h> /* The annotation hides the frame from the unwinder and makes it look like a ordinary ebp save/restore. This avoids some special cases for frame pointer later */ #ifdef CONFIG_FRAME_POINTER .macro FRAME - __ASM_SIZE(push,_cfi) %__ASM_REG(bp) - CFI_REL_OFFSET __ASM_REG(bp), 0 + __ASM_SIZE(push,) %__ASM_REG(bp) __ASM_SIZE(mov) %__ASM_REG(sp), %__ASM_REG(bp) .endm .macro ENDFRAME - __ASM_SIZE(pop,_cfi) %__ASM_REG(bp) - CFI_RESTORE __ASM_REG(bp) + __ASM_SIZE(pop,) %__ASM_REG(bp) .endm #else .macro FRAME diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 1c309763e321..0ac73de925d1 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -50,7 +50,6 @@ #include <asm/smp.h> #include <asm/page_types.h> #include <asm/percpu.h> -#include <asm/dwarf2.h> #include <asm/processor-flags.h> #include <asm/ftrace.h> #include <asm/irq_vectors.h> @@ -113,11 +112,10 @@ /* unfortunately push/pop can't be no-op */ .macro PUSH_GS - pushl_cfi $0 + pushl $0 .endm .macro POP_GS pop=0 addl $(4 + \pop), %esp - CFI_ADJUST_CFA_OFFSET -(4 + \pop) .endm .macro POP_GS_EX .endm @@ -137,16 +135,13 @@ #else /* CONFIG_X86_32_LAZY_GS */ .macro PUSH_GS - pushl_cfi %gs - /*CFI_REL_OFFSET gs, 0*/ + pushl %gs .endm .macro POP_GS pop=0 -98: popl_cfi %gs - /*CFI_RESTORE gs*/ +98: popl %gs .if \pop <> 0 add $\pop, %esp - CFI_ADJUST_CFA_OFFSET -\pop .endif .endm .macro POP_GS_EX @@ -170,11 +165,9 @@ .macro GS_TO_REG reg movl %gs, \reg - /*CFI_REGISTER gs, \reg*/ .endm .macro REG_TO_PTGS reg movl \reg, PT_GS(%esp) - /*CFI_REL_OFFSET gs, PT_GS*/ .endm .macro SET_KERNEL_GS reg movl $(__KERNEL_STACK_CANARY), \reg @@ -186,26 +179,16 @@ .macro SAVE_ALL cld PUSH_GS - pushl_cfi %fs - /*CFI_REL_OFFSET fs, 0;*/ - pushl_cfi %es - /*CFI_REL_OFFSET es, 0;*/ - pushl_cfi %ds - /*CFI_REL_OFFSET ds, 0;*/ - pushl_cfi %eax - CFI_REL_OFFSET eax, 0 - pushl_cfi %ebp - CFI_REL_OFFSET ebp, 0 - pushl_cfi %edi - CFI_REL_OFFSET edi, 0 - pushl_cfi %esi - CFI_REL_OFFSET esi, 0 - pushl_cfi %edx - CFI_REL_OFFSET edx, 0 - pushl_cfi %ecx - CFI_REL_OFFSET ecx, 0 - pushl_cfi %ebx - CFI_REL_OFFSET ebx, 0 + pushl %fs + pushl %es + pushl %ds + pushl %eax + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx movl $(__USER_DS), %edx movl %edx, %ds movl %edx, %es @@ -215,30 +198,20 @@ .endm .macro RESTORE_INT_REGS - popl_cfi %ebx - CFI_RESTORE ebx - popl_cfi %ecx - CFI_RESTORE ecx - popl_cfi %edx - CFI_RESTORE edx - popl_cfi %esi - CFI_RESTORE esi - popl_cfi %edi - CFI_RESTORE edi - popl_cfi %ebp - CFI_RESTORE ebp - popl_cfi %eax - CFI_RESTORE eax + popl %ebx + popl %ecx + popl %edx + popl %esi + popl %edi + popl %ebp + popl %eax .endm .macro RESTORE_REGS pop=0 RESTORE_INT_REGS -1: popl_cfi %ds - /*CFI_RESTORE ds;*/ -2: popl_cfi %es - /*CFI_RESTORE es;*/ -3: popl_cfi %fs - /*CFI_RESTORE fs;*/ +1: popl %ds +2: popl %es +3: popl %fs POP_GS \pop .pushsection .fixup, "ax" 4: movl $0, (%esp) @@ -254,64 +227,27 @@ POP_GS_EX .endm -.macro RING0_INT_FRAME - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 3*4 - /*CFI_OFFSET cs, -2*4;*/ - CFI_OFFSET eip, -3*4 -.endm - -.macro RING0_EC_FRAME - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 4*4 - /*CFI_OFFSET cs, -2*4;*/ - CFI_OFFSET eip, -3*4 -.endm - -.macro RING0_PTREGS_FRAME - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, PT_OLDESP-PT_EBX - /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/ - CFI_OFFSET eip, PT_EIP-PT_OLDESP - /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/ - /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/ - CFI_OFFSET eax, PT_EAX-PT_OLDESP - CFI_OFFSET ebp, PT_EBP-PT_OLDESP - CFI_OFFSET edi, PT_EDI-PT_OLDESP - CFI_OFFSET esi, PT_ESI-PT_OLDESP - CFI_OFFSET edx, PT_EDX-PT_OLDESP - CFI_OFFSET ecx, PT_ECX-PT_OLDESP - CFI_OFFSET ebx, PT_EBX-PT_OLDESP -.endm - ENTRY(ret_from_fork) - CFI_STARTPROC - pushl_cfi %eax + pushl %eax call schedule_tail GET_THREAD_INFO(%ebp) - popl_cfi %eax - pushl_cfi $0x0202 # Reset kernel eflags - popfl_cfi + popl %eax + pushl $0x0202 # Reset kernel eflags + popfl jmp syscall_exit - CFI_ENDPROC END(ret_from_fork) ENTRY(ret_from_kernel_thread) - CFI_STARTPROC - pushl_cfi %eax + pushl %eax call schedule_tail GET_THREAD_INFO(%ebp) - popl_cfi %eax - pushl_cfi $0x0202 # Reset kernel eflags - popfl_cfi + popl %eax + pushl $0x0202 # Reset kernel eflags + popfl movl PT_EBP(%esp),%eax call *PT_EBX(%esp) movl $0,PT_EAX(%esp) jmp syscall_exit - CFI_ENDPROC ENDPROC(ret_from_kernel_thread) /* @@ -323,7 +259,6 @@ ENDPROC(ret_from_kernel_thread) # userspace resumption stub bypassing syscall exit tracing ALIGN - RING0_PTREGS_FRAME ret_from_exception: preempt_stop(CLBR_ANY) ret_from_intr: @@ -367,17 +302,12 @@ need_resched: jmp need_resched END(resume_kernel) #endif - CFI_ENDPROC /* SYSENTER_RETURN points to after the "sysenter" instruction in the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ # sysenter call handler stub ENTRY(ia32_sysenter_target) - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 0 - CFI_REGISTER esp, ebp movl TSS_sysenter_sp0(%esp),%esp sysenter_past_esp: /* @@ -385,14 +315,11 @@ sysenter_past_esp: * enough kernel state to call TRACE_IRQS_OFF can be called - but * we immediately enable interrupts at that point anyway. */ - pushl_cfi $__USER_DS - /*CFI_REL_OFFSET ss, 0*/ - pushl_cfi %ebp - CFI_REL_OFFSET esp, 0 - pushfl_cfi + pushl $__USER_DS + pushl %ebp + pushfl orl $X86_EFLAGS_IF, (%esp) - pushl_cfi $__USER_CS - /*CFI_REL_OFFSET cs, 0*/ + pushl $__USER_CS /* * Push current_thread_info()->sysenter_return to the stack. * A tiny bit of offset fixup is necessary: TI_sysenter_return @@ -401,10 +328,9 @@ sysenter_past_esp: * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack; * and THREAD_SIZE takes us to the bottom. */ - pushl_cfi ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp) - CFI_REL_OFFSET eip, 0 + pushl ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp) - pushl_cfi %eax + pushl %eax SAVE_ALL ENABLE_INTERRUPTS(CLBR_NONE) @@ -453,11 +379,11 @@ sysenter_audit: /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */ movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */ /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */ - pushl_cfi PT_ESI(%esp) /* a3: 5th arg */ - pushl_cfi PT_EDX+4(%esp) /* a2: 4th arg */ + pushl PT_ESI(%esp) /* a3: 5th arg */ + pushl PT_EDX+4(%esp) /* a2: 4th arg */ call __audit_syscall_entry - popl_cfi %ecx /* get that remapped edx off the stack */ - popl_cfi %ecx /* get that remapped esi off the stack */ + popl %ecx /* get that remapped edx off the stack */ + popl %ecx /* get that remapped esi off the stack */ movl PT_EAX(%esp),%eax /* reload syscall number */ jmp sysenter_do_call @@ -480,7 +406,6 @@ sysexit_audit: jmp sysenter_exit #endif - CFI_ENDPROC .pushsection .fixup,"ax" 2: movl $0,PT_FS(%esp) jmp 1b @@ -491,9 +416,8 @@ ENDPROC(ia32_sysenter_target) # system call handler stub ENTRY(system_call) - RING0_INT_FRAME # can't unwind into user space anyway ASM_CLAC - pushl_cfi %eax # save orig_eax + pushl %eax # save orig_eax SAVE_ALL GET_THREAD_INFO(%ebp) # system call tracing in operation / emulation @@ -527,7 +451,6 @@ restore_all_notrace: movb PT_CS(%esp), %al andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax - CFI_REMEMBER_STATE je ldt_ss # returning to user-space with LDT SS #endif restore_nocheck: @@ -543,7 +466,6 @@ ENTRY(iret_exc) _ASM_EXTABLE(irq_return,iret_exc) #ifdef CONFIG_X86_ESPFIX32 - CFI_RESTORE_STATE ldt_ss: #ifdef CONFIG_PARAVIRT /* @@ -577,22 +499,19 @@ ldt_ss: shr $16, %edx mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */ mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */ - pushl_cfi $__ESPFIX_SS - pushl_cfi %eax /* new kernel esp */ + pushl $__ESPFIX_SS + pushl %eax /* new kernel esp */ /* Disable interrupts, but do not irqtrace this section: we * will soon execute iret and the tracer was already set to * the irqstate after the iret */ DISABLE_INTERRUPTS(CLBR_EAX) lss (%esp), %esp /* switch to espfix segment */ - CFI_ADJUST_CFA_OFFSET -8 jmp restore_nocheck #endif - CFI_ENDPROC ENDPROC(system_call) # perform work that needs to be done immediately before resumption ALIGN - RING0_PTREGS_FRAME # can't unwind into user space anyway work_pending: testb $_TIF_NEED_RESCHED, %cl jz work_notifysig @@ -634,9 +553,9 @@ work_notifysig: # deal with pending signals and #ifdef CONFIG_VM86 ALIGN work_notifysig_v86: - pushl_cfi %ecx # save ti_flags for do_notify_resume + pushl %ecx # save ti_flags for do_notify_resume call save_v86_state # %eax contains pt_regs pointer - popl_cfi %ecx + popl %ecx movl %eax, %esp jmp 1b #endif @@ -666,9 +585,7 @@ syscall_exit_work: call syscall_trace_leave jmp resume_userspace END(syscall_exit_work) - CFI_ENDPROC - RING0_INT_FRAME # can't unwind into user space anyway syscall_fault: ASM_CLAC GET_THREAD_INFO(%ebp) @@ -685,7 +602,6 @@ sysenter_badsys: movl $-ENOSYS,%eax jmp sysenter_after_call END(sysenter_badsys) - CFI_ENDPROC .macro FIXUP_ESPFIX_STACK /* @@ -701,10 +617,9 @@ END(sysenter_badsys) mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */ shl $16, %eax addl %esp, %eax /* the adjusted stack pointer */ - pushl_cfi $__KERNEL_DS - pushl_cfi %eax + pushl $__KERNEL_DS + pushl %eax lss (%esp), %esp /* switch to the normal stack segment */ - CFI_ADJUST_CFA_OFFSET -8 #endif .endm .macro UNWIND_ESPFIX_STACK @@ -728,13 +643,11 @@ END(sysenter_badsys) */ .align 8 ENTRY(irq_entries_start) - RING0_INT_FRAME vector=FIRST_EXTERNAL_VECTOR .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) - pushl_cfi $(~vector+0x80) /* Note: always in signed byte range */ + pushl $(~vector+0x80) /* Note: always in signed byte range */ vector=vector+1 jmp common_interrupt - CFI_ADJUST_CFA_OFFSET -4 .align 8 .endr END(irq_entries_start) @@ -753,19 +666,16 @@ common_interrupt: call do_IRQ jmp ret_from_intr ENDPROC(common_interrupt) - CFI_ENDPROC #define BUILD_INTERRUPT3(name, nr, fn) \ ENTRY(name) \ - RING0_INT_FRAME; \ ASM_CLAC; \ - pushl_cfi $~(nr); \ + pushl $~(nr); \ SAVE_ALL; \ TRACE_IRQS_OFF \ movl %esp,%eax; \ call fn; \ jmp ret_from_intr; \ - CFI_ENDPROC; \ ENDPROC(name) @@ -784,37 +694,31 @@ ENDPROC(name) #include <asm/entry_arch.h> ENTRY(coprocessor_error) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_coprocessor_error + pushl $0 + pushl $do_coprocessor_error jmp error_code - CFI_ENDPROC END(coprocessor_error) ENTRY(simd_coprocessor_error) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $0 + pushl $0 #ifdef CONFIG_X86_INVD_BUG /* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */ - ALTERNATIVE "pushl_cfi $do_general_protection", \ + ALTERNATIVE "pushl $do_general_protection", \ "pushl $do_simd_coprocessor_error", \ X86_FEATURE_XMM #else - pushl_cfi $do_simd_coprocessor_error + pushl $do_simd_coprocessor_error #endif jmp error_code - CFI_ENDPROC END(simd_coprocessor_error) ENTRY(device_not_available) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $-1 # mark this as an int - pushl_cfi $do_device_not_available + pushl $-1 # mark this as an int + pushl $do_device_not_available jmp error_code - CFI_ENDPROC END(device_not_available) #ifdef CONFIG_PARAVIRT @@ -830,115 +734,89 @@ END(native_irq_enable_sysexit) #endif ENTRY(overflow) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_overflow + pushl $0 + pushl $do_overflow jmp error_code - CFI_ENDPROC END(overflow) ENTRY(bounds) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_bounds + pushl $0 + pushl $do_bounds jmp error_code - CFI_ENDPROC END(bounds) ENTRY(invalid_op) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_invalid_op + pushl $0 + pushl $do_invalid_op jmp error_code - CFI_ENDPROC END(invalid_op) ENTRY(coprocessor_segment_overrun) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_coprocessor_segment_overrun + pushl $0 + pushl $do_coprocessor_segment_overrun jmp error_code - CFI_ENDPROC END(coprocessor_segment_overrun) ENTRY(invalid_TSS) - RING0_EC_FRAME ASM_CLAC - pushl_cfi $do_invalid_TSS + pushl $do_invalid_TSS jmp error_code - CFI_ENDPROC END(invalid_TSS) ENTRY(segment_not_present) - RING0_EC_FRAME ASM_CLAC - pushl_cfi $do_segment_not_present + pushl $do_segment_not_present jmp error_code - CFI_ENDPROC END(segment_not_present) ENTRY(stack_segment) - RING0_EC_FRAME ASM_CLAC - pushl_cfi $do_stack_segment + pushl $do_stack_segment jmp error_code - CFI_ENDPROC END(stack_segment) ENTRY(alignment_check) - RING0_EC_FRAME ASM_CLAC - pushl_cfi $do_alignment_check + pushl $do_alignment_check jmp error_code - CFI_ENDPROC END(alignment_check) ENTRY(divide_error) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $0 # no error code - pushl_cfi $do_divide_error + pushl $0 # no error code + pushl $do_divide_error jmp error_code - CFI_ENDPROC END(divide_error) #ifdef CONFIG_X86_MCE ENTRY(machine_check) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $0 - pushl_cfi machine_check_vector + pushl $0 + pushl machine_check_vector jmp error_code - CFI_ENDPROC END(machine_check) #endif ENTRY(spurious_interrupt_bug) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_spurious_interrupt_bug + pushl $0 + pushl $do_spurious_interrupt_bug jmp error_code - CFI_ENDPROC END(spurious_interrupt_bug) #ifdef CONFIG_XEN /* Xen doesn't set %esp to be precisely what the normal sysenter entrypoint expects, so fix it up before using the normal path. */ ENTRY(xen_sysenter_target) - RING0_INT_FRAME addl $5*4, %esp /* remove xen-provided frame */ - CFI_ADJUST_CFA_OFFSET -5*4 jmp sysenter_past_esp - CFI_ENDPROC ENTRY(xen_hypervisor_callback) - CFI_STARTPROC - pushl_cfi $-1 /* orig_ax = -1 => not a system call */ + pushl $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL TRACE_IRQS_OFF @@ -962,7 +840,6 @@ ENTRY(xen_do_upcall) call xen_maybe_preempt_hcall #endif jmp ret_from_intr - CFI_ENDPROC ENDPROC(xen_hypervisor_callback) # Hypervisor uses this for application faults while it executes. @@ -976,8 +853,7 @@ ENDPROC(xen_hypervisor_callback) # to pop the stack frame we end up in an infinite loop of failsafe callbacks. # We distinguish between categories by maintaining a status value in EAX. ENTRY(xen_failsafe_callback) - CFI_STARTPROC - pushl_cfi %eax + pushl %eax movl $1,%eax 1: mov 4(%esp),%ds 2: mov 8(%esp),%es @@ -986,15 +862,13 @@ ENTRY(xen_failsafe_callback) /* EAX == 0 => Category 1 (Bad segment) EAX != 0 => Category 2 (Bad IRET) */ testl %eax,%eax - popl_cfi %eax + popl %eax lea 16(%esp),%esp - CFI_ADJUST_CFA_OFFSET -16 jz 5f jmp iret_exc -5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */ +5: pushl $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL jmp ret_from_exception - CFI_ENDPROC .section .fixup,"ax" 6: xorl %eax,%eax @@ -1195,34 +1069,28 @@ return_to_handler: #ifdef CONFIG_TRACING ENTRY(trace_page_fault) - RING0_EC_FRAME ASM_CLAC - pushl_cfi $trace_do_page_fault + pushl $trace_do_page_fault jmp error_code - CFI_ENDPROC END(trace_page_fault) #endif ENTRY(page_fault) - RING0_EC_FRAME ASM_CLAC - pushl_cfi $do_page_fault + pushl $do_page_fault ALIGN error_code: /* the function address is in %gs's slot on the stack */ - pushl_cfi %fs - /*CFI_REL_OFFSET fs, 0*/ - pushl_cfi %es - /*CFI_REL_OFFSET es, 0*/ - pushl_cfi %ds - /*CFI_REL_OFFSET ds, 0*/ - pushl_cfi_reg eax - pushl_cfi_reg ebp - pushl_cfi_reg edi - pushl_cfi_reg esi - pushl_cfi_reg edx - pushl_cfi_reg ecx - pushl_cfi_reg ebx + pushl %fs + pushl %es + pushl %ds + pushl %eax + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx cld movl $(__KERNEL_PERCPU), %ecx movl %ecx, %fs @@ -1240,7 +1108,6 @@ error_code: movl %esp,%eax # pt_regs pointer call *%edi jmp ret_from_exception - CFI_ENDPROC END(page_fault) /* @@ -1261,29 +1128,24 @@ END(page_fault) jne \ok \label: movl TSS_sysenter_sp0 + \offset(%esp), %esp - CFI_DEF_CFA esp, 0 - CFI_UNDEFINED eip - pushfl_cfi - pushl_cfi $__KERNEL_CS - pushl_cfi $sysenter_past_esp - CFI_REL_OFFSET eip, 0 + pushfl + pushl $__KERNEL_CS + pushl $sysenter_past_esp .endm ENTRY(debug) - RING0_INT_FRAME ASM_CLAC cmpl $ia32_sysenter_target,(%esp) jne debug_stack_correct FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn debug_stack_correct: - pushl_cfi $-1 # mark this as an int + pushl $-1 # mark this as an int SAVE_ALL TRACE_IRQS_OFF xorl %edx,%edx # error code 0 movl %esp,%eax # pt_regs pointer call do_debug jmp ret_from_exception - CFI_ENDPROC END(debug) /* @@ -1295,45 +1157,40 @@ END(debug) * fault happened on the sysenter path. */ ENTRY(nmi) - RING0_INT_FRAME ASM_CLAC #ifdef CONFIG_X86_ESPFIX32 - pushl_cfi %eax + pushl %eax movl %ss, %eax cmpw $__ESPFIX_SS, %ax - popl_cfi %eax + popl %eax je nmi_espfix_stack #endif cmpl $ia32_sysenter_target,(%esp) je nmi_stack_fixup - pushl_cfi %eax + pushl %eax movl %esp,%eax /* Do not access memory above the end of our stack page, * it might not exist. */ andl $(THREAD_SIZE-1),%eax cmpl $(THREAD_SIZE-20),%eax - popl_cfi %eax + popl %eax jae nmi_stack_correct cmpl $ia32_sysenter_target,12(%esp) je nmi_debug_stack_check nmi_stack_correct: - /* We have a RING0_INT_FRAME here */ - pushl_cfi %eax + pushl %eax SAVE_ALL xorl %edx,%edx # zero error code movl %esp,%eax # pt_regs pointer call do_nmi jmp restore_all_notrace - CFI_ENDPROC nmi_stack_fixup: - RING0_INT_FRAME FIX_STACK 12, nmi_stack_correct, 1 jmp nmi_stack_correct nmi_debug_stack_check: - /* We have a RING0_INT_FRAME here */ cmpw $__KERNEL_CS,16(%esp) jne nmi_stack_correct cmpl $debug,(%esp) @@ -1345,57 +1202,48 @@ nmi_debug_stack_check: #ifdef CONFIG_X86_ESPFIX32 nmi_espfix_stack: - /* We have a RING0_INT_FRAME here. - * + /* * create the pointer to lss back */ - pushl_cfi %ss - pushl_cfi %esp + pushl %ss + pushl %esp addl $4, (%esp) /* copy the iret frame of 12 bytes */ .rept 3 - pushl_cfi 16(%esp) + pushl 16(%esp) .endr - pushl_cfi %eax + pushl %eax SAVE_ALL FIXUP_ESPFIX_STACK # %eax == %esp xorl %edx,%edx # zero error code call do_nmi RESTORE_REGS lss 12+4(%esp), %esp # back to espfix stack - CFI_ADJUST_CFA_OFFSET -24 jmp irq_return #endif - CFI_ENDPROC END(nmi) ENTRY(int3) - RING0_INT_FRAME ASM_CLAC - pushl_cfi $-1 # mark this as an int + pushl $-1 # mark this as an int SAVE_ALL TRACE_IRQS_OFF xorl %edx,%edx # zero error code movl %esp,%eax # pt_regs pointer call do_int3 jmp ret_from_exception - CFI_ENDPROC END(int3) ENTRY(general_protection) - RING0_EC_FRAME - pushl_cfi $do_general_protection + pushl $do_general_protection jmp error_code - CFI_ENDPROC END(general_protection) #ifdef CONFIG_KVM_GUEST ENTRY(async_page_fault) - RING0_EC_FRAME ASM_CLAC - pushl_cfi $do_async_page_fault + pushl $do_async_page_fault jmp error_code - CFI_ENDPROC END(async_page_fault) #endif diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 47b95813dc37..b84cec50c8cf 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -19,8 +19,6 @@ * at the top of the kernel process stack. * * Some macro usage: - * - CFI macros are used to generate dwarf2 unwind information for better - * backtraces. They don't change any code. * - ENTRY/END Define functions in the symbol table. * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging. * - idtentry - Define exception entry points. @@ -30,7 +28,6 @@ #include <asm/segment.h> #include <asm/cache.h> #include <asm/errno.h> -#include <asm/dwarf2.h> #include <asm/calling.h> #include <asm/asm-offsets.h> #include <asm/msr.h> @@ -113,61 +110,6 @@ ENDPROC(native_usergs_sysret64) #endif /* - * empty frame - */ - .macro EMPTY_FRAME start=1 offset=0 - .if \start - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,8+\offset - .else - CFI_DEF_CFA_OFFSET 8+\offset - .endif - .endm - -/* - * initial frame state for interrupts (and exceptions without error code) - */ - .macro INTR_FRAME start=1 offset=0 - EMPTY_FRAME \start, 5*8+\offset - /*CFI_REL_OFFSET ss, 4*8+\offset*/ - CFI_REL_OFFSET rsp, 3*8+\offset - /*CFI_REL_OFFSET rflags, 2*8+\offset*/ - /*CFI_REL_OFFSET cs, 1*8+\offset*/ - CFI_REL_OFFSET rip, 0*8+\offset - .endm - -/* - * initial frame state for exceptions with error code (and interrupts - * with vector already pushed) - */ - .macro XCPT_FRAME start=1 offset=0 - INTR_FRAME \start, 1*8+\offset - .endm - -/* - * frame that enables passing a complete pt_regs to a C function. - */ - .macro DEFAULT_FRAME start=1 offset=0 - XCPT_FRAME \start, ORIG_RAX+\offset - CFI_REL_OFFSET rdi, RDI+\offset - CFI_REL_OFFSET rsi, RSI+\offset - CFI_REL_OFFSET rdx, RDX+\offset - CFI_REL_OFFSET rcx, RCX+\offset - CFI_REL_OFFSET rax, RAX+\offset - CFI_REL_OFFSET r8, R8+\offset - CFI_REL_OFFSET r9, R9+\offset - CFI_REL_OFFSET r10, R10+\offset - CFI_REL_OFFSET r11, R11+\offset - CFI_REL_OFFSET rbx, RBX+\offset - CFI_REL_OFFSET rbp, RBP+\offset - CFI_REL_OFFSET r12, R12+\offset - CFI_REL_OFFSET r13, R13+\offset - CFI_REL_OFFSET r14, R14+\offset - CFI_REL_OFFSET r15, R15+\offset - .endm - -/* * 64bit SYSCALL instruction entry. Up to 6 arguments in registers. * * 64bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11, @@ -196,12 +138,6 @@ ENDPROC(native_usergs_sysret64) */ ENTRY(system_call) - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,0 - CFI_REGISTER rip,rcx - /*CFI_REGISTER rflags,r11*/ - /* * Interrupts are off on entry. * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, @@ -219,8 +155,8 @@ GLOBAL(system_call_after_swapgs) movq PER_CPU_VAR(cpu_current_top_of_stack),%rsp /* Construct struct pt_regs on stack */ - pushq_cfi $__USER_DS /* pt_regs->ss */ - pushq_cfi PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */ + pushq $__USER_DS /* pt_regs->ss */ + pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */ /* * Re-enable interrupts. * We use 'rsp_scratch' as a scratch space, hence irq-off block above @@ -229,22 +165,20 @@ GLOBAL(system_call_after_swapgs) * with using rsp_scratch: */ ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %r11 /* pt_regs->flags */ - pushq_cfi $__USER_CS /* pt_regs->cs */ - pushq_cfi %rcx /* pt_regs->ip */ - CFI_REL_OFFSET rip,0 - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rcx /* pt_regs->cx */ - pushq_cfi $-ENOSYS /* pt_regs->ax */ - pushq_cfi_reg r8 /* pt_regs->r8 */ - pushq_cfi_reg r9 /* pt_regs->r9 */ - pushq_cfi_reg r10 /* pt_regs->r10 */ - pushq_cfi_reg r11 /* pt_regs->r11 */ + pushq %r11 /* pt_regs->flags */ + pushq $__USER_CS /* pt_regs->cs */ + pushq %rcx /* pt_regs->ip */ + pushq %rax /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + pushq %rsi /* pt_regs->si */ + pushq %rdx /* pt_regs->dx */ + pushq %rcx /* pt_regs->cx */ + pushq $-ENOSYS /* pt_regs->ax */ + pushq %r8 /* pt_regs->r8 */ + pushq %r9 /* pt_regs->r9 */ + pushq %r10 /* pt_regs->r10 */ + pushq %r11 /* pt_regs->r11 */ sub $(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 6*8 testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) jnz tracesys @@ -282,13 +216,9 @@ system_call_fastpath: testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */ - CFI_REMEMBER_STATE - RESTORE_C_REGS_EXCEPT_RCX_R11 movq RIP(%rsp),%rcx - CFI_REGISTER rip,rcx movq EFLAGS(%rsp),%r11 - /*CFI_REGISTER rflags,r11*/ movq RSP(%rsp),%rsp /* * 64bit SYSRET restores rip from rcx, @@ -307,8 +237,6 @@ system_call_fastpath: */ USERGS_SYSRET64 - CFI_RESTORE_STATE - /* Do syscall entry tracing */ tracesys: movq %rsp, %rdi @@ -374,9 +302,9 @@ int_careful: jnc int_very_careful TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %rdi + pushq %rdi SCHEDULE_USER - popq_cfi %rdi + popq %rdi DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF jmp int_with_check @@ -389,10 +317,10 @@ int_very_careful: /* Check for syscall exit trace */ testl $_TIF_WORK_SYSCALL_EXIT,%edx jz int_signal - pushq_cfi %rdi + pushq %rdi leaq 8(%rsp),%rdi # &ptregs -> arg1 call syscall_trace_leave - popq_cfi %rdi + popq %rdi andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi jmp int_restore_rest @@ -475,27 +403,21 @@ syscall_return: * perf profiles. Nothing jumps here. */ syscall_return_via_sysret: - CFI_REMEMBER_STATE /* rcx and r11 are already restored (see code above) */ RESTORE_C_REGS_EXCEPT_RCX_R11 movq RSP(%rsp),%rsp USERGS_SYSRET64 - CFI_RESTORE_STATE opportunistic_sysret_failed: SWAPGS jmp restore_c_regs_and_iret - CFI_ENDPROC END(system_call) .macro FORK_LIKE func ENTRY(stub_\func) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 /* offset 8: return address */ SAVE_EXTRA_REGS 8 jmp sys_\func - CFI_ENDPROC END(stub_\func) .endm @@ -504,8 +426,6 @@ END(stub_\func) FORK_LIKE vfork ENTRY(stub_execve) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 call sys_execve return_from_execve: testl %eax, %eax @@ -515,11 +435,9 @@ return_from_execve: 1: /* must use IRET code path (pt_regs->cs may have changed) */ addq $8, %rsp - CFI_ADJUST_CFA_OFFSET -8 ZERO_EXTRA_REGS movq %rax,RAX(%rsp) jmp int_ret_from_sys_call - CFI_ENDPROC END(stub_execve) /* * Remaining execve stubs are only 7 bytes long. @@ -527,32 +445,23 @@ END(stub_execve) */ .align 8 GLOBAL(stub_execveat) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 call sys_execveat jmp return_from_execve - CFI_ENDPROC END(stub_execveat) #if defined(CONFIG_X86_X32_ABI) || defined(CONFIG_IA32_EMULATION) .align 8 GLOBAL(stub_x32_execve) GLOBAL(stub32_execve) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 call compat_sys_execve jmp return_from_execve - CFI_ENDPROC END(stub32_execve) END(stub_x32_execve) .align 8 GLOBAL(stub_x32_execveat) GLOBAL(stub32_execveat) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 call compat_sys_execveat jmp return_from_execve - CFI_ENDPROC END(stub32_execveat) END(stub_x32_execveat) #endif @@ -562,8 +471,6 @@ END(stub_x32_execveat) * This cannot be done with SYSRET, so use the IRET return path instead. */ ENTRY(stub_rt_sigreturn) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 /* * SAVE_EXTRA_REGS result is not normally needed: * sigreturn overwrites all pt_regs->GPREGS. @@ -575,21 +482,16 @@ ENTRY(stub_rt_sigreturn) call sys_rt_sigreturn return_from_stub: addq $8, %rsp - CFI_ADJUST_CFA_OFFSET -8 RESTORE_EXTRA_REGS movq %rax,RAX(%rsp) jmp int_ret_from_sys_call - CFI_ENDPROC END(stub_rt_sigreturn) #ifdef CONFIG_X86_X32_ABI ENTRY(stub_x32_rt_sigreturn) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 SAVE_EXTRA_REGS 8 call sys32_x32_rt_sigreturn jmp return_from_stub - CFI_ENDPROC END(stub_x32_rt_sigreturn) #endif @@ -599,12 +501,11 @@ END(stub_x32_rt_sigreturn) * rdi: prev task we switched from */ ENTRY(ret_from_fork) - DEFAULT_FRAME LOCK ; btr $TIF_FORK,TI_flags(%r8) - pushq_cfi $0x0002 - popfq_cfi # reset kernel eflags + pushq $0x0002 + popfq # reset kernel eflags call schedule_tail # rdi: 'prev' task parameter @@ -628,7 +529,6 @@ ENTRY(ret_from_fork) movl $0, RAX(%rsp) RESTORE_EXTRA_REGS jmp int_ret_from_sys_call - CFI_ENDPROC END(ret_from_fork) /* @@ -637,16 +537,13 @@ END(ret_from_fork) */ .align 8 ENTRY(irq_entries_start) - INTR_FRAME vector=FIRST_EXTERNAL_VECTOR .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) - pushq_cfi $(~vector+0x80) /* Note: always in signed byte range */ + pushq $(~vector+0x80) /* Note: always in signed byte range */ vector=vector+1 jmp common_interrupt - CFI_ADJUST_CFA_OFFSET -8 .align 8 .endr - CFI_ENDPROC END(irq_entries_start) /* @@ -688,17 +585,7 @@ END(irq_entries_start) movq %rsp, %rsi incl PER_CPU_VAR(irq_count) cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp - CFI_DEF_CFA_REGISTER rsi pushq %rsi - /* - * For debugger: - * "CFA (Current Frame Address) is the value on stack + offset" - */ - CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \ - 0x77 /* DW_OP_breg7 (rsp) */, 0, \ - 0x06 /* DW_OP_deref */, \ - 0x08 /* DW_OP_const1u */, SIZEOF_PTREGS-RBP, \ - 0x22 /* DW_OP_plus */ /* We entered an interrupt context - irqs are off: */ TRACE_IRQS_OFF @@ -711,7 +598,6 @@ END(irq_entries_start) */ .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: - XCPT_FRAME ASM_CLAC addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */ interrupt do_IRQ @@ -723,11 +609,8 @@ ret_from_intr: /* Restore saved previous stack */ popq %rsi - CFI_DEF_CFA rsi,SIZEOF_PTREGS-RBP /* reg/off reset after def_cfa_expr */ /* return code expects complete pt_regs - adjust rsp accordingly: */ leaq -RBP(%rsi),%rsp - CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET RBP testb $3, CS(%rsp) jz retint_kernel @@ -743,7 +626,6 @@ retint_check: LOCKDEP_SYS_EXIT_IRQ movl TI_flags(%rcx),%edx andl %edi,%edx - CFI_REMEMBER_STATE jnz retint_careful retint_swapgs: /* return to user-space */ @@ -807,8 +689,8 @@ native_irq_return_iret: #ifdef CONFIG_X86_ESPFIX64 native_irq_return_ldt: - pushq_cfi %rax - pushq_cfi %rdi + pushq %rax + pushq %rdi SWAPGS movq PER_CPU_VAR(espfix_waddr),%rdi movq %rax,(0*8)(%rdi) /* RAX */ @@ -823,24 +705,23 @@ native_irq_return_ldt: movq (5*8)(%rsp),%rax /* RSP */ movq %rax,(4*8)(%rdi) andl $0xffff0000,%eax - popq_cfi %rdi + popq %rdi orq PER_CPU_VAR(espfix_stack),%rax SWAPGS movq %rax,%rsp - popq_cfi %rax + popq %rax jmp native_irq_return_iret #endif /* edi: workmask, edx: work */ retint_careful: - CFI_RESTORE_STATE bt $TIF_NEED_RESCHED,%edx jnc retint_signal TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %rdi + pushq %rdi SCHEDULE_USER - popq_cfi %rdi + popq %rdi GET_THREAD_INFO(%rcx) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF @@ -862,7 +743,6 @@ retint_signal: GET_THREAD_INFO(%rcx) jmp retint_with_reschedule - CFI_ENDPROC END(common_interrupt) /* @@ -870,13 +750,11 @@ END(common_interrupt) */ .macro apicinterrupt3 num sym do_sym ENTRY(\sym) - INTR_FRAME ASM_CLAC - pushq_cfi $~(\num) + pushq $~(\num) .Lcommon_\sym: interrupt \do_sym jmp ret_from_intr - CFI_ENDPROC END(\sym) .endm @@ -959,24 +837,17 @@ ENTRY(\sym) .error "using shift_ist requires paranoid=1" .endif - .if \has_error_code - XCPT_FRAME - .else - INTR_FRAME - .endif - ASM_CLAC PARAVIRT_ADJUST_EXCEPTION_FRAME .ifeq \has_error_code - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ + pushq $-1 /* ORIG_RAX: no syscall to restart */ .endif ALLOC_PT_GPREGS_ON_STACK .if \paranoid .if \paranoid == 1 - CFI_REMEMBER_STATE testb $3, CS(%rsp) /* If coming from userspace, switch */ jnz 1f /* stacks. */ .endif @@ -986,8 +857,6 @@ ENTRY(\sym) .endif /* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */ - DEFAULT_FRAME 0 - .if \paranoid .if \shift_ist != -1 TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */ @@ -1023,7 +892,6 @@ ENTRY(\sym) .endif .if \paranoid == 1 - CFI_RESTORE_STATE /* * Paranoid entry from userspace. Switch stacks and treat it * as a normal entry. This means that paranoid handlers @@ -1032,7 +900,6 @@ ENTRY(\sym) 1: call error_entry - DEFAULT_FRAME 0 movq %rsp,%rdi /* pt_regs pointer */ call sync_regs @@ -1051,8 +918,6 @@ ENTRY(\sym) jmp error_exit /* %ebx: no swapgs flag */ .endif - - CFI_ENDPROC END(\sym) .endm @@ -1085,17 +950,15 @@ idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0 /* Reload gs selector with exception handling */ /* edi: new selector */ ENTRY(native_load_gs_index) - CFI_STARTPROC - pushfq_cfi + pushfq DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI) SWAPGS gs_change: movl %edi,%gs 2: mfence /* workaround */ SWAPGS - popfq_cfi + popfq ret - CFI_ENDPROC END(native_load_gs_index) _ASM_EXTABLE(gs_change,bad_gs) @@ -1110,22 +973,15 @@ bad_gs: /* Call softirq on interrupt stack. Interrupts are off. */ ENTRY(do_softirq_own_stack) - CFI_STARTPROC - pushq_cfi %rbp - CFI_REL_OFFSET rbp,0 + pushq %rbp mov %rsp,%rbp - CFI_DEF_CFA_REGISTER rbp incl PER_CPU_VAR(irq_count) cmove PER_CPU_VAR(irq_stack_ptr),%rsp push %rbp # backlink for old unwinder call __do_softirq leaveq - CFI_RESTORE rbp - CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET -8 decl PER_CPU_VAR(irq_count) ret - CFI_ENDPROC END(do_softirq_own_stack) #ifdef CONFIG_XEN @@ -1145,28 +1001,22 @@ idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0 * activation and restart the handler using the previous one. */ ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) - CFI_STARTPROC /* * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will * see the correct pointer to the pt_regs */ movq %rdi, %rsp # we don't return, adjust the stack frame - CFI_ENDPROC - DEFAULT_FRAME 11: incl PER_CPU_VAR(irq_count) movq %rsp,%rbp - CFI_DEF_CFA_REGISTER rbp cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp pushq %rbp # backlink for old unwinder call xen_evtchn_do_upcall popq %rsp - CFI_DEF_CFA_REGISTER rsp decl PER_CPU_VAR(irq_count) #ifndef CONFIG_PREEMPT call xen_maybe_preempt_hcall #endif jmp error_exit - CFI_ENDPROC END(xen_do_hypervisor_callback) /* @@ -1183,16 +1033,8 @@ END(xen_do_hypervisor_callback) * with its current contents: any discrepancy means we in category 1. */ ENTRY(xen_failsafe_callback) - INTR_FRAME 1 (6*8) - /*CFI_REL_OFFSET gs,GS*/ - /*CFI_REL_OFFSET fs,FS*/ - /*CFI_REL_OFFSET es,ES*/ - /*CFI_REL_OFFSET ds,DS*/ - CFI_REL_OFFSET r11,8 - CFI_REL_OFFSET rcx,0 movl %ds,%ecx cmpw %cx,0x10(%rsp) - CFI_REMEMBER_STATE jne 1f movl %es,%ecx cmpw %cx,0x18(%rsp) @@ -1205,29 +1047,21 @@ ENTRY(xen_failsafe_callback) jne 1f /* All segments match their saved values => Category 2 (Bad IRET). */ movq (%rsp),%rcx - CFI_RESTORE rcx movq 8(%rsp),%r11 - CFI_RESTORE r11 addq $0x30,%rsp - CFI_ADJUST_CFA_OFFSET -0x30 - pushq_cfi $0 /* RIP */ - pushq_cfi %r11 - pushq_cfi %rcx + pushq $0 /* RIP */ + pushq %r11 + pushq %rcx jmp general_protection - CFI_RESTORE_STATE 1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */ movq (%rsp),%rcx - CFI_RESTORE rcx movq 8(%rsp),%r11 - CFI_RESTORE r11 addq $0x30,%rsp - CFI_ADJUST_CFA_OFFSET -0x30 - pushq_cfi $-1 /* orig_ax = -1 => not a system call */ + pushq $-1 /* orig_ax = -1 => not a system call */ ALLOC_PT_GPREGS_ON_STACK SAVE_C_REGS SAVE_EXTRA_REGS jmp error_exit - CFI_ENDPROC END(xen_failsafe_callback) apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ @@ -1263,7 +1097,6 @@ idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector( * Return: ebx=0: need swapgs on exit, ebx=1: otherwise */ ENTRY(paranoid_entry) - XCPT_FRAME 1 15*8 cld SAVE_C_REGS 8 SAVE_EXTRA_REGS 8 @@ -1275,7 +1108,6 @@ ENTRY(paranoid_entry) SWAPGS xorl %ebx,%ebx 1: ret - CFI_ENDPROC END(paranoid_entry) /* @@ -1290,7 +1122,6 @@ END(paranoid_entry) */ /* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */ ENTRY(paranoid_exit) - DEFAULT_FRAME DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF_DEBUG testl %ebx,%ebx /* swapgs needed? */ @@ -1305,7 +1136,6 @@ paranoid_exit_restore: RESTORE_C_REGS REMOVE_PT_GPREGS_FROM_STACK 8 INTERRUPT_RETURN - CFI_ENDPROC END(paranoid_exit) /* @@ -1313,7 +1143,6 @@ END(paranoid_exit) * Return: ebx=0: need swapgs on exit, ebx=1: otherwise */ ENTRY(error_entry) - XCPT_FRAME 1 15*8 cld SAVE_C_REGS 8 SAVE_EXTRA_REGS 8 @@ -1333,7 +1162,6 @@ error_sti: * for these here too. */ error_kernelspace: - CFI_REL_OFFSET rcx, RCX+8 incl %ebx leaq native_irq_return_iret(%rip),%rcx cmpq %rcx,RIP+8(%rsp) @@ -1357,13 +1185,11 @@ error_bad_iret: mov %rax,%rsp decl %ebx /* Return to usergs */ jmp error_sti - CFI_ENDPROC END(error_entry) /* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */ ENTRY(error_exit) - DEFAULT_FRAME movl %ebx,%eax RESTORE_EXTRA_REGS DISABLE_INTERRUPTS(CLBR_NONE) @@ -1377,12 +1203,10 @@ ENTRY(error_exit) andl %edi,%edx jnz retint_careful jmp retint_swapgs - CFI_ENDPROC END(error_exit) /* Runs on exception stack */ ENTRY(nmi) - INTR_FRAME PARAVIRT_ADJUST_EXCEPTION_FRAME /* * We allow breakpoints in NMIs. If a breakpoint occurs, then @@ -1417,8 +1241,7 @@ ENTRY(nmi) */ /* Use %rdx as our temp variable throughout */ - pushq_cfi %rdx - CFI_REL_OFFSET rdx, 0 + pushq %rdx /* * If %cs was not the kernel segment, then the NMI triggered in user @@ -1452,8 +1275,6 @@ ENTRY(nmi) jb first_nmi /* Ah, it is within the NMI stack, treat it as nested */ - CFI_REMEMBER_STATE - nested_nmi: /* * Do nothing if we interrupted the fixup in repeat_nmi. @@ -1471,26 +1292,22 @@ nested_nmi: /* Set up the interrupted NMIs stack to jump to repeat_nmi */ leaq -1*8(%rsp), %rdx movq %rdx, %rsp - CFI_ADJUST_CFA_OFFSET 1*8 leaq -10*8(%rsp), %rdx - pushq_cfi $__KERNEL_DS - pushq_cfi %rdx - pushfq_cfi - pushq_cfi $__KERNEL_CS - pushq_cfi $repeat_nmi + pushq $__KERNEL_DS + pushq %rdx + pushfq + pushq $__KERNEL_CS + pushq $repeat_nmi /* Put stack back */ addq $(6*8), %rsp - CFI_ADJUST_CFA_OFFSET -6*8 nested_nmi_out: - popq_cfi %rdx - CFI_RESTORE rdx + popq %rdx /* No need to check faults here */ INTERRUPT_RETURN - CFI_RESTORE_STATE first_nmi: /* * Because nested NMIs will use the pushed location that we @@ -1529,22 +1346,19 @@ first_nmi: */ /* Do not pop rdx, nested NMIs will corrupt that part of the stack */ movq (%rsp), %rdx - CFI_RESTORE rdx /* Set the NMI executing variable on the stack. */ - pushq_cfi $1 + pushq $1 /* * Leave room for the "copied" frame */ subq $(5*8), %rsp - CFI_ADJUST_CFA_OFFSET 5*8 /* Copy the stack frame to the Saved frame */ .rept 5 - pushq_cfi 11*8(%rsp) + pushq 11*8(%rsp) .endr - CFI_DEF_CFA_OFFSET 5*8 /* Everything up to here is safe from nested NMIs */ @@ -1567,12 +1381,10 @@ repeat_nmi: /* Make another copy, this one may be modified by nested NMIs */ addq $(10*8), %rsp - CFI_ADJUST_CFA_OFFSET -10*8 .rept 5 - pushq_cfi -6*8(%rsp) + pushq -6*8(%rsp) .endr subq $(5*8), %rsp - CFI_DEF_CFA_OFFSET 5*8 end_repeat_nmi: /* @@ -1580,7 +1392,7 @@ end_repeat_nmi: * NMI if the first NMI took an exception and reset our iret stack * so that we repeat another NMI. */ - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ + pushq $-1 /* ORIG_RAX: no syscall to restart */ ALLOC_PT_GPREGS_ON_STACK /* @@ -1591,7 +1403,6 @@ end_repeat_nmi: * exceptions might do. */ call paranoid_entry - DEFAULT_FRAME 0 /* * Save off the CR2 register. If we take a page fault in the NMI then @@ -1628,13 +1439,10 @@ nmi_restore: /* Clear the NMI executing stack variable */ movq $0, 5*8(%rsp) jmp irq_return - CFI_ENDPROC END(nmi) ENTRY(ignore_sysret) - CFI_STARTPROC mov $-ENOSYS,%eax sysret - CFI_ENDPROC END(ignore_sysret) diff --git a/arch/x86/lib/atomic64_386_32.S b/arch/x86/lib/atomic64_386_32.S index 00933d5e992f..9b0ca8fe80fc 100644 --- a/arch/x86/lib/atomic64_386_32.S +++ b/arch/x86/lib/atomic64_386_32.S @@ -11,26 +11,23 @@ #include <linux/linkage.h> #include <asm/alternative-asm.h> -#include <asm/dwarf2.h> /* if you want SMP support, implement these with real spinlocks */ .macro LOCK reg - pushfl_cfi + pushfl cli .endm .macro UNLOCK reg - popfl_cfi + popfl .endm #define BEGIN(op) \ .macro endp; \ - CFI_ENDPROC; \ ENDPROC(atomic64_##op##_386); \ .purgem endp; \ .endm; \ ENTRY(atomic64_##op##_386); \ - CFI_STARTPROC; \ LOCK v; #define ENDP endp diff --git a/arch/x86/lib/atomic64_cx8_32.S b/arch/x86/lib/atomic64_cx8_32.S index 082a85167a5b..db3ae85440ff 100644 --- a/arch/x86/lib/atomic64_cx8_32.S +++ b/arch/x86/lib/atomic64_cx8_32.S @@ -11,7 +11,6 @@ #include <linux/linkage.h> #include <asm/alternative-asm.h> -#include <asm/dwarf2.h> .macro read64 reg movl %ebx, %eax @@ -22,16 +21,11 @@ .endm ENTRY(atomic64_read_cx8) - CFI_STARTPROC - read64 %ecx ret - CFI_ENDPROC ENDPROC(atomic64_read_cx8) ENTRY(atomic64_set_cx8) - CFI_STARTPROC - 1: /* we don't need LOCK_PREFIX since aligned 64-bit writes * are atomic on 586 and newer */ @@ -39,28 +33,23 @@ ENTRY(atomic64_set_cx8) jne 1b ret - CFI_ENDPROC ENDPROC(atomic64_set_cx8) ENTRY(atomic64_xchg_cx8) - CFI_STARTPROC - 1: LOCK_PREFIX cmpxchg8b (%esi) jne 1b ret - CFI_ENDPROC ENDPROC(atomic64_xchg_cx8) .macro addsub_return func ins insc ENTRY(atomic64_\func\()_return_cx8) - CFI_STARTPROC - pushl_cfi_reg ebp - pushl_cfi_reg ebx - pushl_cfi_reg esi - pushl_cfi_reg edi + pushl %ebp + pushl %ebx + pushl %esi + pushl %edi movl %eax, %esi movl %edx, %edi @@ -79,12 +68,11 @@ ENTRY(atomic64_\func\()_return_cx8) 10: movl %ebx, %eax movl %ecx, %edx - popl_cfi_reg edi - popl_cfi_reg esi - popl_cfi_reg ebx - popl_cfi_reg ebp + popl %edi + popl %esi + popl %ebx + popl %ebp ret - CFI_ENDPROC ENDPROC(atomic64_\func\()_return_cx8) .endm @@ -93,8 +81,7 @@ addsub_return sub sub sbb .macro incdec_return func ins insc ENTRY(atomic64_\func\()_return_cx8) - CFI_STARTPROC - pushl_cfi_reg ebx + pushl %ebx read64 %esi 1: @@ -109,9 +96,8 @@ ENTRY(atomic64_\func\()_return_cx8) 10: movl %ebx, %eax movl %ecx, %edx - popl_cfi_reg ebx + popl %ebx ret - CFI_ENDPROC ENDPROC(atomic64_\func\()_return_cx8) .endm @@ -119,8 +105,7 @@ incdec_return inc add adc incdec_return dec sub sbb ENTRY(atomic64_dec_if_positive_cx8) - CFI_STARTPROC - pushl_cfi_reg ebx + pushl %ebx read64 %esi 1: @@ -136,18 +121,16 @@ ENTRY(atomic64_dec_if_positive_cx8) 2: movl %ebx, %eax movl %ecx, %edx - popl_cfi_reg ebx + popl %ebx ret - CFI_ENDPROC ENDPROC(atomic64_dec_if_positive_cx8) ENTRY(atomic64_add_unless_cx8) - CFI_STARTPROC - pushl_cfi_reg ebp - pushl_cfi_reg ebx + pushl %ebp + pushl %ebx /* these just push these two parameters on the stack */ - pushl_cfi_reg edi - pushl_cfi_reg ecx + pushl %edi + pushl %ecx movl %eax, %ebp movl %edx, %edi @@ -168,21 +151,18 @@ ENTRY(atomic64_add_unless_cx8) movl $1, %eax 3: addl $8, %esp - CFI_ADJUST_CFA_OFFSET -8 - popl_cfi_reg ebx - popl_cfi_reg ebp + popl %ebx + popl %ebp ret 4: cmpl %edx, 4(%esp) jne 2b xorl %eax, %eax jmp 3b - CFI_ENDPROC ENDPROC(atomic64_add_unless_cx8) ENTRY(atomic64_inc_not_zero_cx8) - CFI_STARTPROC - pushl_cfi_reg ebx + pushl %ebx read64 %esi 1: @@ -199,7 +179,6 @@ ENTRY(atomic64_inc_not_zero_cx8) movl $1, %eax 3: - popl_cfi_reg ebx + popl %ebx ret - CFI_ENDPROC ENDPROC(atomic64_inc_not_zero_cx8) diff --git a/arch/x86/lib/checksum_32.S b/arch/x86/lib/checksum_32.S index 9bc944a91274..c1e623209853 100644 --- a/arch/x86/lib/checksum_32.S +++ b/arch/x86/lib/checksum_32.S @@ -26,7 +26,6 @@ */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/errno.h> #include <asm/asm.h> @@ -50,9 +49,8 @@ unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum) * alignment for the unrolled loop. */ ENTRY(csum_partial) - CFI_STARTPROC - pushl_cfi_reg esi - pushl_cfi_reg ebx + pushl %esi + pushl %ebx movl 20(%esp),%eax # Function arg: unsigned int sum movl 16(%esp),%ecx # Function arg: int len movl 12(%esp),%esi # Function arg: unsigned char *buff @@ -129,10 +127,9 @@ ENTRY(csum_partial) jz 8f roll $8, %eax 8: - popl_cfi_reg ebx - popl_cfi_reg esi + popl %ebx + popl %esi ret - CFI_ENDPROC ENDPROC(csum_partial) #else @@ -140,9 +137,8 @@ ENDPROC(csum_partial) /* Version for PentiumII/PPro */ ENTRY(csum_partial) - CFI_STARTPROC - pushl_cfi_reg esi - pushl_cfi_reg ebx + pushl %esi + pushl %ebx movl 20(%esp),%eax # Function arg: unsigned int sum movl 16(%esp),%ecx # Function arg: int len movl 12(%esp),%esi # Function arg: const unsigned char *buf @@ -249,10 +245,9 @@ ENTRY(csum_partial) jz 90f roll $8, %eax 90: - popl_cfi_reg ebx - popl_cfi_reg esi + popl %ebx + popl %esi ret - CFI_ENDPROC ENDPROC(csum_partial) #endif @@ -287,12 +282,10 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst, #define FP 12 ENTRY(csum_partial_copy_generic) - CFI_STARTPROC subl $4,%esp - CFI_ADJUST_CFA_OFFSET 4 - pushl_cfi_reg edi - pushl_cfi_reg esi - pushl_cfi_reg ebx + pushl %edi + pushl %esi + pushl %ebx movl ARGBASE+16(%esp),%eax # sum movl ARGBASE+12(%esp),%ecx # len movl ARGBASE+4(%esp),%esi # src @@ -401,12 +394,11 @@ DST( movb %cl, (%edi) ) .previous - popl_cfi_reg ebx - popl_cfi_reg esi - popl_cfi_reg edi - popl_cfi %ecx # equivalent to addl $4,%esp + popl %ebx + popl %esi + popl %edi + popl %ecx # equivalent to addl $4,%esp ret - CFI_ENDPROC ENDPROC(csum_partial_copy_generic) #else @@ -426,10 +418,9 @@ ENDPROC(csum_partial_copy_generic) #define ARGBASE 12 ENTRY(csum_partial_copy_generic) - CFI_STARTPROC - pushl_cfi_reg ebx - pushl_cfi_reg edi - pushl_cfi_reg esi + pushl %ebx + pushl %edi + pushl %esi movl ARGBASE+4(%esp),%esi #src movl ARGBASE+8(%esp),%edi #dst movl ARGBASE+12(%esp),%ecx #len @@ -489,11 +480,10 @@ DST( movb %dl, (%edi) ) jmp 7b .previous - popl_cfi_reg esi - popl_cfi_reg edi - popl_cfi_reg ebx + popl %esi + popl %edi + popl %ebx ret - CFI_ENDPROC ENDPROC(csum_partial_copy_generic) #undef ROUND diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S index e67e579c93bd..a2fe51b00cce 100644 --- a/arch/x86/lib/clear_page_64.S +++ b/arch/x86/lib/clear_page_64.S @@ -1,5 +1,4 @@ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/cpufeature.h> #include <asm/alternative-asm.h> @@ -15,7 +14,6 @@ * %rdi - page */ ENTRY(clear_page) - CFI_STARTPROC ALTERNATIVE_2 "jmp clear_page_orig", "", X86_FEATURE_REP_GOOD, \ "jmp clear_page_c_e", X86_FEATURE_ERMS @@ -24,11 +22,9 @@ ENTRY(clear_page) xorl %eax,%eax rep stosq ret - CFI_ENDPROC ENDPROC(clear_page) ENTRY(clear_page_orig) - CFI_STARTPROC xorl %eax,%eax movl $4096/64,%ecx @@ -48,14 +44,11 @@ ENTRY(clear_page_orig) jnz .Lloop nop ret - CFI_ENDPROC ENDPROC(clear_page_orig) ENTRY(clear_page_c_e) - CFI_STARTPROC movl $4096,%ecx xorl %eax,%eax rep stosb ret - CFI_ENDPROC ENDPROC(clear_page_c_e) diff --git a/arch/x86/lib/cmpxchg16b_emu.S b/arch/x86/lib/cmpxchg16b_emu.S index 40a172541ee2..9b330242e740 100644 --- a/arch/x86/lib/cmpxchg16b_emu.S +++ b/arch/x86/lib/cmpxchg16b_emu.S @@ -6,7 +6,6 @@ * */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/percpu.h> .text @@ -21,7 +20,6 @@ * %al : Operation successful */ ENTRY(this_cpu_cmpxchg16b_emu) -CFI_STARTPROC # # Emulate 'cmpxchg16b %gs:(%rsi)' except we return the result in %al not @@ -32,7 +30,7 @@ CFI_STARTPROC # *atomic* on a single cpu (as provided by the this_cpu_xx class of # macros). # - pushfq_cfi + pushfq cli cmpq PER_CPU_VAR((%rsi)), %rax @@ -43,17 +41,13 @@ CFI_STARTPROC movq %rbx, PER_CPU_VAR((%rsi)) movq %rcx, PER_CPU_VAR(8(%rsi)) - CFI_REMEMBER_STATE - popfq_cfi + popfq mov $1, %al ret - CFI_RESTORE_STATE .Lnot_same: - popfq_cfi + popfq xor %al,%al ret -CFI_ENDPROC - ENDPROC(this_cpu_cmpxchg16b_emu) diff --git a/arch/x86/lib/cmpxchg8b_emu.S b/arch/x86/lib/cmpxchg8b_emu.S index b4807fce5177..ad5349778490 100644 --- a/arch/x86/lib/cmpxchg8b_emu.S +++ b/arch/x86/lib/cmpxchg8b_emu.S @@ -7,7 +7,6 @@ */ #include <linux/linkage.h> -#include <asm/dwarf2.h> .text @@ -20,14 +19,13 @@ * %ecx : high 32 bits of new value */ ENTRY(cmpxchg8b_emu) -CFI_STARTPROC # # Emulate 'cmpxchg8b (%esi)' on UP except we don't # set the whole ZF thing (caller will just compare # eax:edx with the expected value) # - pushfl_cfi + pushfl cli cmpl (%esi), %eax @@ -38,18 +36,15 @@ CFI_STARTPROC movl %ebx, (%esi) movl %ecx, 4(%esi) - CFI_REMEMBER_STATE - popfl_cfi + popfl ret - CFI_RESTORE_STATE .Lnot_same: movl (%esi), %eax .Lhalf_same: movl 4(%esi), %edx - popfl_cfi + popfl ret -CFI_ENDPROC ENDPROC(cmpxchg8b_emu) diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S index 8239dbcbf984..009f98216b7e 100644 --- a/arch/x86/lib/copy_page_64.S +++ b/arch/x86/lib/copy_page_64.S @@ -1,7 +1,6 @@ /* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/cpufeature.h> #include <asm/alternative-asm.h> @@ -13,22 +12,16 @@ */ ALIGN ENTRY(copy_page) - CFI_STARTPROC ALTERNATIVE "jmp copy_page_regs", "", X86_FEATURE_REP_GOOD movl $4096/8, %ecx rep movsq ret - CFI_ENDPROC ENDPROC(copy_page) ENTRY(copy_page_regs) - CFI_STARTPROC subq $2*8, %rsp - CFI_ADJUST_CFA_OFFSET 2*8 movq %rbx, (%rsp) - CFI_REL_OFFSET rbx, 0 movq %r12, 1*8(%rsp) - CFI_REL_OFFSET r12, 1*8 movl $(4096/64)-5, %ecx .p2align 4 @@ -87,11 +80,7 @@ ENTRY(copy_page_regs) jnz .Loop2 movq (%rsp), %rbx - CFI_RESTORE rbx movq 1*8(%rsp), %r12 - CFI_RESTORE r12 addq $2*8, %rsp - CFI_ADJUST_CFA_OFFSET -2*8 ret - CFI_ENDPROC ENDPROC(copy_page_regs) diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index e4b3beee83bd..982ce34f4a9b 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -7,7 +7,6 @@ */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/current.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> @@ -18,7 +17,6 @@ /* Standard copy_to_user with segment limit checking */ ENTRY(_copy_to_user) - CFI_STARTPROC GET_THREAD_INFO(%rax) movq %rdi,%rcx addq %rdx,%rcx @@ -30,12 +28,10 @@ ENTRY(_copy_to_user) X86_FEATURE_REP_GOOD, \ "jmp copy_user_enhanced_fast_string", \ X86_FEATURE_ERMS - CFI_ENDPROC ENDPROC(_copy_to_user) /* Standard copy_from_user with segment limit checking */ ENTRY(_copy_from_user) - CFI_STARTPROC GET_THREAD_INFO(%rax) movq %rsi,%rcx addq %rdx,%rcx @@ -47,14 +43,12 @@ ENTRY(_copy_from_user) X86_FEATURE_REP_GOOD, \ "jmp copy_user_enhanced_fast_string", \ X86_FEATURE_ERMS - CFI_ENDPROC ENDPROC(_copy_from_user) .section .fixup,"ax" /* must zero dest */ ENTRY(bad_from_user) bad_from_user: - CFI_STARTPROC movl %edx,%ecx xorl %eax,%eax rep @@ -62,7 +56,6 @@ bad_from_user: bad_to_user: movl %edx,%eax ret - CFI_ENDPROC ENDPROC(bad_from_user) .previous @@ -80,7 +73,6 @@ ENDPROC(bad_from_user) * eax uncopied bytes or 0 if successful. */ ENTRY(copy_user_generic_unrolled) - CFI_STARTPROC ASM_STAC cmpl $8,%edx jb 20f /* less then 8 bytes, go to byte copy loop */ @@ -162,7 +154,6 @@ ENTRY(copy_user_generic_unrolled) _ASM_EXTABLE(19b,40b) _ASM_EXTABLE(21b,50b) _ASM_EXTABLE(22b,50b) - CFI_ENDPROC ENDPROC(copy_user_generic_unrolled) /* Some CPUs run faster using the string copy instructions. @@ -184,7 +175,6 @@ ENDPROC(copy_user_generic_unrolled) * eax uncopied bytes or 0 if successful. */ ENTRY(copy_user_generic_string) - CFI_STARTPROC ASM_STAC cmpl $8,%edx jb 2f /* less than 8 bytes, go to byte copy loop */ @@ -209,7 +199,6 @@ ENTRY(copy_user_generic_string) _ASM_EXTABLE(1b,11b) _ASM_EXTABLE(3b,12b) - CFI_ENDPROC ENDPROC(copy_user_generic_string) /* @@ -225,7 +214,6 @@ ENDPROC(copy_user_generic_string) * eax uncopied bytes or 0 if successful. */ ENTRY(copy_user_enhanced_fast_string) - CFI_STARTPROC ASM_STAC movl %edx,%ecx 1: rep @@ -240,7 +228,6 @@ ENTRY(copy_user_enhanced_fast_string) .previous _ASM_EXTABLE(1b,12b) - CFI_ENDPROC ENDPROC(copy_user_enhanced_fast_string) /* @@ -248,7 +235,6 @@ ENDPROC(copy_user_enhanced_fast_string) * This will force destination/source out of cache for more performance. */ ENTRY(__copy_user_nocache) - CFI_STARTPROC ASM_STAC cmpl $8,%edx jb 20f /* less then 8 bytes, go to byte copy loop */ @@ -332,5 +318,4 @@ ENTRY(__copy_user_nocache) _ASM_EXTABLE(19b,40b) _ASM_EXTABLE(21b,50b) _ASM_EXTABLE(22b,50b) - CFI_ENDPROC ENDPROC(__copy_user_nocache) diff --git a/arch/x86/lib/csum-copy_64.S b/arch/x86/lib/csum-copy_64.S index 9734182966f3..7e48807b2fa1 100644 --- a/arch/x86/lib/csum-copy_64.S +++ b/arch/x86/lib/csum-copy_64.S @@ -6,7 +6,6 @@ * for more details. No warranty for anything given at all. */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/errno.h> #include <asm/asm.h> @@ -47,23 +46,16 @@ ENTRY(csum_partial_copy_generic) - CFI_STARTPROC cmpl $3*64, %edx jle .Lignore .Lignore: subq $7*8, %rsp - CFI_ADJUST_CFA_OFFSET 7*8 movq %rbx, 2*8(%rsp) - CFI_REL_OFFSET rbx, 2*8 movq %r12, 3*8(%rsp) - CFI_REL_OFFSET r12, 3*8 movq %r14, 4*8(%rsp) - CFI_REL_OFFSET r14, 4*8 movq %r13, 5*8(%rsp) - CFI_REL_OFFSET r13, 5*8 movq %rbp, 6*8(%rsp) - CFI_REL_OFFSET rbp, 6*8 movq %r8, (%rsp) movq %r9, 1*8(%rsp) @@ -206,22 +198,14 @@ ENTRY(csum_partial_copy_generic) addl %ebx, %eax adcl %r9d, %eax /* carry */ - CFI_REMEMBER_STATE .Lende: movq 2*8(%rsp), %rbx - CFI_RESTORE rbx movq 3*8(%rsp), %r12 - CFI_RESTORE r12 movq 4*8(%rsp), %r14 - CFI_RESTORE r14 movq 5*8(%rsp), %r13 - CFI_RESTORE r13 movq 6*8(%rsp), %rbp - CFI_RESTORE rbp addq $7*8, %rsp - CFI_ADJUST_CFA_OFFSET -7*8 ret - CFI_RESTORE_STATE /* Exception handlers. Very simple, zeroing is done in the wrappers */ .Lbad_source: @@ -237,5 +221,4 @@ ENTRY(csum_partial_copy_generic) jz .Lende movl $-EFAULT, (%rax) jmp .Lende - CFI_ENDPROC ENDPROC(csum_partial_copy_generic) diff --git a/arch/x86/lib/getuser.S b/arch/x86/lib/getuser.S index a4512359656a..46668cda4ffd 100644 --- a/arch/x86/lib/getuser.S +++ b/arch/x86/lib/getuser.S @@ -26,7 +26,6 @@ */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/page_types.h> #include <asm/errno.h> #include <asm/asm-offsets.h> @@ -36,7 +35,6 @@ .text ENTRY(__get_user_1) - CFI_STARTPROC GET_THREAD_INFO(%_ASM_DX) cmp TI_addr_limit(%_ASM_DX),%_ASM_AX jae bad_get_user @@ -45,11 +43,9 @@ ENTRY(__get_user_1) xor %eax,%eax ASM_CLAC ret - CFI_ENDPROC ENDPROC(__get_user_1) ENTRY(__get_user_2) - CFI_STARTPROC add $1,%_ASM_AX jc bad_get_user GET_THREAD_INFO(%_ASM_DX) @@ -60,11 +56,9 @@ ENTRY(__get_user_2) xor %eax,%eax ASM_CLAC ret - CFI_ENDPROC ENDPROC(__get_user_2) ENTRY(__get_user_4) - CFI_STARTPROC add $3,%_ASM_AX jc bad_get_user GET_THREAD_INFO(%_ASM_DX) @@ -75,11 +69,9 @@ ENTRY(__get_user_4) xor %eax,%eax ASM_CLAC ret - CFI_ENDPROC ENDPROC(__get_user_4) ENTRY(__get_user_8) - CFI_STARTPROC #ifdef CONFIG_X86_64 add $7,%_ASM_AX jc bad_get_user @@ -104,28 +96,23 @@ ENTRY(__get_user_8) ASM_CLAC ret #endif - CFI_ENDPROC ENDPROC(__get_user_8) bad_get_user: - CFI_STARTPROC xor %edx,%edx mov $(-EFAULT),%_ASM_AX ASM_CLAC ret - CFI_ENDPROC END(bad_get_user) #ifdef CONFIG_X86_32 bad_get_user_8: - CFI_STARTPROC xor %edx,%edx xor %ecx,%ecx mov $(-EFAULT),%_ASM_AX ASM_CLAC ret - CFI_ENDPROC END(bad_get_user_8) #endif diff --git a/arch/x86/lib/iomap_copy_64.S b/arch/x86/lib/iomap_copy_64.S index 05a95e713da8..33147fef3452 100644 --- a/arch/x86/lib/iomap_copy_64.S +++ b/arch/x86/lib/iomap_copy_64.S @@ -16,15 +16,12 @@ */ #include <linux/linkage.h> -#include <asm/dwarf2.h> /* * override generic version in lib/iomap_copy.c */ ENTRY(__iowrite32_copy) - CFI_STARTPROC movl %edx,%ecx rep movsd ret - CFI_ENDPROC ENDPROC(__iowrite32_copy) diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index b046664f5a1c..16698bba87de 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -2,7 +2,6 @@ #include <linux/linkage.h> #include <asm/cpufeature.h> -#include <asm/dwarf2.h> #include <asm/alternative-asm.h> /* @@ -53,7 +52,6 @@ ENTRY(memcpy_erms) ENDPROC(memcpy_erms) ENTRY(memcpy_orig) - CFI_STARTPROC movq %rdi, %rax cmpq $0x20, %rdx @@ -178,5 +176,4 @@ ENTRY(memcpy_orig) .Lend: retq - CFI_ENDPROC ENDPROC(memcpy_orig) diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S index 0f8a0d0331b9..ca2afdd6d98e 100644 --- a/arch/x86/lib/memmove_64.S +++ b/arch/x86/lib/memmove_64.S @@ -6,7 +6,6 @@ * - Copyright 2011 Fenghua Yu <fenghua.yu@intel.com> */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/cpufeature.h> #include <asm/alternative-asm.h> @@ -27,7 +26,6 @@ ENTRY(memmove) ENTRY(__memmove) - CFI_STARTPROC /* Handle more 32 bytes in loop */ mov %rdi, %rax @@ -207,6 +205,5 @@ ENTRY(__memmove) movb %r11b, (%rdi) 13: retq - CFI_ENDPROC ENDPROC(__memmove) ENDPROC(memmove) diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S index 93118fb23976..2661fad05827 100644 --- a/arch/x86/lib/memset_64.S +++ b/arch/x86/lib/memset_64.S @@ -1,7 +1,6 @@ /* Copyright 2002 Andi Kleen, SuSE Labs */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/cpufeature.h> #include <asm/alternative-asm.h> @@ -66,7 +65,6 @@ ENTRY(memset_erms) ENDPROC(memset_erms) ENTRY(memset_orig) - CFI_STARTPROC movq %rdi,%r10 /* expand byte value */ @@ -78,7 +76,6 @@ ENTRY(memset_orig) movl %edi,%r9d andl $7,%r9d jnz .Lbad_alignment - CFI_REMEMBER_STATE .Lafter_bad_alignment: movq %rdx,%rcx @@ -128,7 +125,6 @@ ENTRY(memset_orig) movq %r10,%rax ret - CFI_RESTORE_STATE .Lbad_alignment: cmpq $7,%rdx jbe .Lhandle_7 @@ -139,5 +135,4 @@ ENTRY(memset_orig) subq %r8,%rdx jmp .Lafter_bad_alignment .Lfinal: - CFI_ENDPROC ENDPROC(memset_orig) diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S index 3ca5218fbece..c81556409bbb 100644 --- a/arch/x86/lib/msr-reg.S +++ b/arch/x86/lib/msr-reg.S @@ -1,6 +1,5 @@ #include <linux/linkage.h> #include <linux/errno.h> -#include <asm/dwarf2.h> #include <asm/asm.h> #include <asm/msr.h> @@ -13,9 +12,8 @@ */ .macro op_safe_regs op ENTRY(\op\()_safe_regs) - CFI_STARTPROC - pushq_cfi_reg rbx - pushq_cfi_reg rbp + pushq %rbx + pushq %rbp movq %rdi, %r10 /* Save pointer */ xorl %r11d, %r11d /* Return value */ movl (%rdi), %eax @@ -25,7 +23,6 @@ ENTRY(\op\()_safe_regs) movl 20(%rdi), %ebp movl 24(%rdi), %esi movl 28(%rdi), %edi - CFI_REMEMBER_STATE 1: \op 2: movl %eax, (%r10) movl %r11d, %eax /* Return value */ @@ -35,16 +32,14 @@ ENTRY(\op\()_safe_regs) movl %ebp, 20(%r10) movl %esi, 24(%r10) movl %edi, 28(%r10) - popq_cfi_reg rbp - popq_cfi_reg rbx + popq %rbp + popq %rbx ret 3: - CFI_RESTORE_STATE movl $-EIO, %r11d jmp 2b _ASM_EXTABLE(1b, 3b) - CFI_ENDPROC ENDPROC(\op\()_safe_regs) .endm @@ -52,13 +47,12 @@ ENDPROC(\op\()_safe_regs) .macro op_safe_regs op ENTRY(\op\()_safe_regs) - CFI_STARTPROC - pushl_cfi_reg ebx - pushl_cfi_reg ebp - pushl_cfi_reg esi - pushl_cfi_reg edi - pushl_cfi $0 /* Return value */ - pushl_cfi %eax + pushl %ebx + pushl %ebp + pushl %esi + pushl %edi + pushl $0 /* Return value */ + pushl %eax movl 4(%eax), %ecx movl 8(%eax), %edx movl 12(%eax), %ebx @@ -66,32 +60,28 @@ ENTRY(\op\()_safe_regs) movl 24(%eax), %esi movl 28(%eax), %edi movl (%eax), %eax - CFI_REMEMBER_STATE 1: \op -2: pushl_cfi %eax +2: pushl %eax movl 4(%esp), %eax - popl_cfi (%eax) + popl (%eax) addl $4, %esp - CFI_ADJUST_CFA_OFFSET -4 movl %ecx, 4(%eax) movl %edx, 8(%eax) movl %ebx, 12(%eax) movl %ebp, 20(%eax) movl %esi, 24(%eax) movl %edi, 28(%eax) - popl_cfi %eax - popl_cfi_reg edi - popl_cfi_reg esi - popl_cfi_reg ebp - popl_cfi_reg ebx + popl %eax + popl %edi + popl %esi + popl %ebp + popl %ebx ret 3: - CFI_RESTORE_STATE movl $-EIO, 4(%esp) jmp 2b _ASM_EXTABLE(1b, 3b) - CFI_ENDPROC ENDPROC(\op\()_safe_regs) .endm diff --git a/arch/x86/lib/putuser.S b/arch/x86/lib/putuser.S index fc6ba17a7eec..e0817a12d323 100644 --- a/arch/x86/lib/putuser.S +++ b/arch/x86/lib/putuser.S @@ -11,7 +11,6 @@ * return value. */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/thread_info.h> #include <asm/errno.h> #include <asm/asm.h> @@ -30,11 +29,9 @@ * as they get called from within inline assembly. */ -#define ENTER CFI_STARTPROC ; \ - GET_THREAD_INFO(%_ASM_BX) +#define ENTER GET_THREAD_INFO(%_ASM_BX) #define EXIT ASM_CLAC ; \ - ret ; \ - CFI_ENDPROC + ret .text ENTRY(__put_user_1) @@ -87,7 +84,6 @@ ENTRY(__put_user_8) ENDPROC(__put_user_8) bad_put_user: - CFI_STARTPROC movl $-EFAULT,%eax EXIT END(bad_put_user) diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S index 2322abe4da3b..40027db99140 100644 --- a/arch/x86/lib/rwsem.S +++ b/arch/x86/lib/rwsem.S @@ -15,7 +15,6 @@ #include <linux/linkage.h> #include <asm/alternative-asm.h> -#include <asm/dwarf2.h> #define __ASM_HALF_REG(reg) __ASM_SEL(reg, e##reg) #define __ASM_HALF_SIZE(inst) __ASM_SEL(inst##w, inst##l) @@ -34,10 +33,10 @@ */ #define save_common_regs \ - pushl_cfi_reg ecx + pushl %ecx #define restore_common_regs \ - popl_cfi_reg ecx + popl %ecx /* Avoid uglifying the argument copying x86-64 needs to do. */ .macro movq src, dst @@ -64,50 +63,45 @@ */ #define save_common_regs \ - pushq_cfi_reg rdi; \ - pushq_cfi_reg rsi; \ - pushq_cfi_reg rcx; \ - pushq_cfi_reg r8; \ - pushq_cfi_reg r9; \ - pushq_cfi_reg r10; \ - pushq_cfi_reg r11 + pushq %rdi; \ + pushq %rsi; \ + pushq %rcx; \ + pushq %r8; \ + pushq %r9; \ + pushq %r10; \ + pushq %r11 #define restore_common_regs \ - popq_cfi_reg r11; \ - popq_cfi_reg r10; \ - popq_cfi_reg r9; \ - popq_cfi_reg r8; \ - popq_cfi_reg rcx; \ - popq_cfi_reg rsi; \ - popq_cfi_reg rdi + popq %r11; \ + popq %r10; \ + popq %r9; \ + popq %r8; \ + popq %rcx; \ + popq %rsi; \ + popq %rdi #endif /* Fix up special calling conventions */ ENTRY(call_rwsem_down_read_failed) - CFI_STARTPROC save_common_regs - __ASM_SIZE(push,_cfi_reg) __ASM_REG(dx) + __ASM_SIZE(push,) %__ASM_REG(dx) movq %rax,%rdi call rwsem_down_read_failed - __ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx) + __ASM_SIZE(pop,) %__ASM_REG(dx) restore_common_regs ret - CFI_ENDPROC ENDPROC(call_rwsem_down_read_failed) ENTRY(call_rwsem_down_write_failed) - CFI_STARTPROC save_common_regs movq %rax,%rdi call rwsem_down_write_failed restore_common_regs ret - CFI_ENDPROC ENDPROC(call_rwsem_down_write_failed) ENTRY(call_rwsem_wake) - CFI_STARTPROC /* do nothing if still outstanding active readers */ __ASM_HALF_SIZE(dec) %__ASM_HALF_REG(dx) jnz 1f @@ -116,17 +110,14 @@ ENTRY(call_rwsem_wake) call rwsem_wake restore_common_regs 1: ret - CFI_ENDPROC ENDPROC(call_rwsem_wake) ENTRY(call_rwsem_downgrade_wake) - CFI_STARTPROC save_common_regs - __ASM_SIZE(push,_cfi_reg) __ASM_REG(dx) + __ASM_SIZE(push,) %__ASM_REG(dx) movq %rax,%rdi call rwsem_downgrade_wake - __ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx) + __ASM_SIZE(pop,) %__ASM_REG(dx) restore_common_regs ret - CFI_ENDPROC ENDPROC(call_rwsem_downgrade_wake) diff --git a/arch/x86/lib/thunk_32.S b/arch/x86/lib/thunk_32.S index 5eb715087b80..e9acf5f4fc92 100644 --- a/arch/x86/lib/thunk_32.S +++ b/arch/x86/lib/thunk_32.S @@ -6,16 +6,14 @@ */ #include <linux/linkage.h> #include <asm/asm.h> - #include <asm/dwarf2.h> /* put return address in eax (arg1) */ .macro THUNK name, func, put_ret_addr_in_eax=0 .globl \name \name: - CFI_STARTPROC - pushl_cfi_reg eax - pushl_cfi_reg ecx - pushl_cfi_reg edx + pushl %eax + pushl %ecx + pushl %edx .if \put_ret_addr_in_eax /* Place EIP in the arg1 */ @@ -23,11 +21,10 @@ .endif call \func - popl_cfi_reg edx - popl_cfi_reg ecx - popl_cfi_reg eax + popl %edx + popl %ecx + popl %eax ret - CFI_ENDPROC _ASM_NOKPROBE(\name) .endm diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/lib/thunk_64.S index f89ba4e93025..10f555e435e1 100644 --- a/arch/x86/lib/thunk_64.S +++ b/arch/x86/lib/thunk_64.S @@ -6,7 +6,6 @@ * Subject to the GNU public license, v.2. No warranty of any kind. */ #include <linux/linkage.h> -#include <asm/dwarf2.h> #include <asm/calling.h> #include <asm/asm.h> @@ -14,27 +13,25 @@ .macro THUNK name, func, put_ret_addr_in_rdi=0 .globl \name \name: - CFI_STARTPROC /* this one pushes 9 elems, the next one would be %rIP */ - pushq_cfi_reg rdi - pushq_cfi_reg rsi - pushq_cfi_reg rdx - pushq_cfi_reg rcx - pushq_cfi_reg rax - pushq_cfi_reg r8 - pushq_cfi_reg r9 - pushq_cfi_reg r10 - pushq_cfi_reg r11 + pushq %rdi + pushq %rsi + pushq %rdx + pushq %rcx + pushq %rax + pushq %r8 + pushq %r9 + pushq %r10 + pushq %r11 .if \put_ret_addr_in_rdi /* 9*8(%rsp) is return addr on stack */ - movq_cfi_restore 9*8, rdi + movq 9*8(%rsp), %rdi .endif call \func jmp restore - CFI_ENDPROC _ASM_NOKPROBE(\name) .endm @@ -57,19 +54,16 @@ #if defined(CONFIG_TRACE_IRQFLAGS) \ || defined(CONFIG_DEBUG_LOCK_ALLOC) \ || defined(CONFIG_PREEMPT) - CFI_STARTPROC - CFI_ADJUST_CFA_OFFSET 9*8 restore: - popq_cfi_reg r11 - popq_cfi_reg r10 - popq_cfi_reg r9 - popq_cfi_reg r8 - popq_cfi_reg rax - popq_cfi_reg rcx - popq_cfi_reg rdx - popq_cfi_reg rsi - popq_cfi_reg rdi + popq %r11 + popq %r10 + popq %r9 + popq %r8 + popq %rax + popq %rcx + popq %rdx + popq %rsi + popq %rdi ret - CFI_ENDPROC _ASM_NOKPROBE(restore) #endif diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S index 6440221ced0d..4093216b3791 100644 --- a/arch/x86/net/bpf_jit.S +++ b/arch/x86/net/bpf_jit.S @@ -8,7 +8,6 @@ * of the License. */ #include <linux/linkage.h> -#include <asm/dwarf2.h> /* * Calling convention : |