powerpc/85xx: Add P1021MDS board support

P1021 is a dual e500v2 core based SOC with:
* 3 eTSECs (eTSEC1/3 RGMII, eTSEC2 SGMII on this board)
* 2 PCIe Controller
* 1 USB2.0 controller
* eSDHC, eSPI, I2C, DUART
* eLBC (NAND, BCSR, PMC0/1)
* Security Engine (SEC 3.3.2)
* Quicc Engine (QE)

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Yu Liu <Yu.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 797 insertions, 3 deletions

diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
new file mode 100644
index 000000000000..7fad2df25981
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -0,0 +1,698 @@
+/*
+ * P1021 MDS Device Tree Source
+ *
+ * Copyright 2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1021";
+	compatible = "fsl,P1021MDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1021@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1021@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NAND Flash, BCSR, PMC0/1*/
+		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf8010000 0x00020000
+			  0x3 0x0 0x0 0xf8020000 0x00020000>;
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x0 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 5MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00500000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@b00000 {
+				/* 6MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00600000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 14MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00e00000>;
+				label = "NAND (RW) Writable User area";
+			};
+
+			partition@1f00000 {
+				/* 1MB for microcode */
+				reg = <0x01f00000 0x00100000>;
+				label = "NAND (RO) QE Ucode";
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+		};
+
+		pib@2,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <2 0 0x10000>;
+		};
+
+		pib@3,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <3 0 0x10000>;
+		};
+	};
+
+	soc@ffe00000 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1021-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1021-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1021-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			espi,num-ss-bits = <4>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1021-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		 mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				reg = <0x4>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@B0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@B1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@B2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1021-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1",
+				     "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1021-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1021-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x60>;
+			ranges = <0x0 0xe0100 0x60>;
+			device_type = "par_io";
+			num-ports = <3>;
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9
+*/
+					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+			};
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe@ffe80000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			interrupts = <63 2 60 2>; //high:47 low:44
+			interrupt-parent = <&mpic>;
+		};
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1>;
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <5>;
+			reg = <0x2400 0x200>;
+			interrupts = <40>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x10000 0x6000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+				"fsl,cpm-muram-data";
+				reg = <0x0 0x6000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index f0684c8ac960..8fe87fc61485 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
  *
  * Author: Andy Fleming <afleming@freescale.com>
  *
@@ -154,6 +154,10 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
  * Setup the architecture
  *
  */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+
 static void __init mpc85xx_mds_setup_arch(void)
 {
 	struct device_node *np;
@@ -194,6 +198,10 @@ static void __init mpc85xx_mds_setup_arch(void)
 	}
 #endif
 
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
 #ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np) {
@@ -271,9 +279,49 @@ static void __init mpc85xx_mds_setup_arch(void)
 						BCSR_UCC_RGMII, BCSR_UCC_RTBI);
 			}
 
+		} else if (machine_is(p1021_mds)) {
+#define BCSR11_ENET_MICRST     (0x1 << 5)
+			/* Reset Micrel PHY */
+			clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
+			setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 		}
+
 		iounmap(bcsr_regs);
 	}
+
+	if (machine_is(p1021_mds)) {
+#define MPC85xx_PMUXCR_OFFSET           0x60
+#define MPC85xx_PMUXCR_QE0              0x00008000
+#define MPC85xx_PMUXCR_QE3              0x00001000
+#define MPC85xx_PMUXCR_QE9              0x00000040
+#define MPC85xx_PMUXCR_QE12             0x00000008
+		static __be32 __iomem *pmuxcr;
+
+		np = of_find_node_by_name(NULL, "global-utilities");
+
+		if (np) {
+			pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
+
+			if (!pmuxcr)
+				printk(KERN_EMERG "Error: Alternate function"
+					" signal multiplex control register not"
+					" mapped!\n");
+			else
+			/* P1021 has pins muxed for QE and other functions. To
+			 * enable QE UEC mode, we need to set bit QE0 for UCC1
+			 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+			 * and QE12 for QE MII management singals in PMUXCR
+			 * register.
+			 */
+				setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
+						  MPC85xx_PMUXCR_QE3 |
+						  MPC85xx_PMUXCR_QE9 |
+						  MPC85xx_PMUXCR_QE12);
+
+			of_node_put(np);
+		}
+
+	}
 #endif	/* CONFIG_QUICC_ENGINE */
 
 #ifdef CONFIG_SWIOTLB
@@ -330,6 +378,16 @@ static struct of_device_id mpc85xx_ids[] = {
 	{},
 };
 
+static struct of_device_id p1021_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{ .compatible = "gianfar", },
+	{},
+};
+
 static int __init mpc85xx_publish_devices(void)
 {
 	if (machine_is(mpc8568_mds))
@@ -342,11 +400,22 @@ static int __init mpc85xx_publish_devices(void)
 
 	return 0;
 }
+
+static int __init p1021_publish_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, p1021_ids, NULL);
+
+	return 0;
+}
+
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
+machine_device_initcall(p1021_mds, p1021_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
@@ -366,7 +435,7 @@ static void __init mpc85xx_mds_pic_init(void)
 
 	mpic = mpic_alloc(np, r.start,
 			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
-			MPIC_BROKEN_FRR_NIRQS,
+			MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 	of_node_put(np);
@@ -380,7 +449,11 @@ static void __init mpc85xx_mds_pic_init(void)
 		if (!np)
 			return;
 	}
-	qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
+	if (machine_is(p1021_mds))
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+	else
+		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
 	of_node_put(np);
 #endif				/* CONFIG_QUICC_ENGINE */
 }
@@ -426,3 +499,26 @@ define_machine(mpc8569_mds) {
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 #endif
 };
+
+static int __init p1021_mds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
+
+}
+
+define_machine(p1021_mds) {
+	.name		= "P1021 MDS",
+	.probe		= p1021_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
+	.get_irq	= mpic_get_irq,
+	.restart	= fsl_rstcr_restart,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
+