Blackfin arch: add supporting for double fault debug handling

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

5 files changed, 255 insertions, 76 deletions

diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index c468624d55f0..0afa89818722 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -22,6 +22,44 @@ config DEBUG_HWERR
 	  hardware error interrupts and need to know where they are coming
 	  from.
 
+config DEBUG_DOUBLEFAULT
+	bool "Debug Double Faults"
+	default n
+	help
+	  If an exception is caused while executing code within the exception
+	  handler, the NMI handler, the reset vector, or in emulator mode,
+	  a double fault occurs. On the Blackfin, this is a unrecoverable
+	  event. You have two options:
+	  - RESET exactly when double fault occurs. The excepting
+	    instruction address is stored in RETX, where the next kernel
+	    boot will print it out.
+	  - Print debug message. This is much more error prone, although
+	    easier to handle. It is error prone since:
+	    - The excepting instruction is not committed.
+	    - All writebacks from the instruction are prevented.
+	    - The generated exception is not taken.
+	    - The EXCAUSE field is updated with an unrecoverable event
+	    The only way to check this is to see if EXCAUSE contains the
+	    unrecoverable event value at every exception return. By selecting
+	    this option, you are skipping over the faulting instruction, and 
+	    hoping things stay together enough to print out a debug message.
+
+	  This does add a little kernel code, but is the only method to debug
+	  double faults - if unsure say "Y"
+
+choice
+	prompt "Double Fault Failure Method"
+	default DEBUG_DOUBLEFAULT_PRINT
+	depends on DEBUG_DOUBLEFAULT
+
+config DEBUG_DOUBLEFAULT_PRINT
+	bool "Print"
+
+config DEBUG_DOUBLEFAULT_RESET
+	bool "Reset"
+
+endchoice
+
 config DEBUG_ICACHE_CHECK
 	bool "Check Instruction cache coherency"
 	depends on DEBUG_KERNEL
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 7a82d10b4ebf..8e639dc886a3 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -52,7 +52,8 @@ EXPORT_SYMBOL(mtd_size);
 #endif
 
 char __initdata command_line[COMMAND_LINE_SIZE];
-unsigned int __initdata *__retx;
+void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
+	*init_saved_icplb_fault_addr, *init_saved_dcplb_fault_addr;
 
 /* boot memmap, for parsing "memmap=" */
 #define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
@@ -782,16 +783,25 @@ void __init setup_arch(char **cmdline_p)
 
 	_bfin_swrst = bfin_read_SWRST();
 
-	/* If we double fault, reset the system - otherwise we hang forever */
-	bfin_write_SWRST(DOUBLE_FAULT);
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
+#endif
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_RESET
+	bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
+#endif
 
-	if (_bfin_swrst & RESET_DOUBLE)
-		/*
-		 * don't decode the address, since you don't know if this
-		 * kernel's symbol map is the same as the crashing kernel
-		 */
-		printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
-	else if (_bfin_swrst & RESET_WDOG)
+	if (_bfin_swrst & RESET_DOUBLE) {
+		printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+		/* We assume the crashing kernel, and the current symbol table match */
+		printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n",
+			(int)init_saved_seqstat & SEQSTAT_EXCAUSE, init_saved_retx);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr);
+#endif
+		printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
+			init_retx);
+	} else if (_bfin_swrst & RESET_WDOG)
 		printk(KERN_INFO "Recovering from Watchdog event\n");
 	else if (_bfin_swrst & RESET_SOFTWARE)
 		printk(KERN_NOTICE "Reset caused by Software reset\n");
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index fd24e04fc19e..bd41fca315dd 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -68,7 +68,15 @@ void __init trap_init(void)
 	CSYNC();
 }
 
-unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
+/*
+ * Used to save the RETX, SEQSTAT, I/D CPLB FAULT ADDR
+ * values across the transition from exception to IRQ5.
+ * We put these in L1, so they are going to be in a valid
+ * location during exception context
+ */
+__attribute__((l1_data))
+unsigned long saved_retx, saved_seqstat,
+	saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
 static void decode_address(char *buf, unsigned long address)
 {
@@ -186,9 +194,27 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 	console_verbose();
 	oops_in_progress = 1;
 	printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
-	dump_bfin_process(fp);
-	dump_bfin_mem(fp);
-	show_regs(fp);
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
+		char buf[150];
+		decode_address(buf, saved_retx);
+		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
+			(int)saved_seqstat & SEQSTAT_EXCAUSE, buf);
+		decode_address(buf, saved_dcplb_fault_addr);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, saved_icplb_fault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
+
+		decode_address(buf, fp->retx);
+		printk(KERN_NOTICE "The instruction at %s caused a double exception\n",
+			buf);
+	} else
+#endif
+	{
+		dump_bfin_process(fp);
+		dump_bfin_mem(fp);
+		show_regs(fp);
+	}
 	panic("Double Fault - unrecoverable event\n");
 
 }
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 847c172a99eb..90c7397036ed 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -129,6 +129,18 @@ ENTRY(_ex_icplb_miss)
 #else
 	call __cplb_hdr;
 #endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* While we were processing this, did we double fault? */
+	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
+	r6.l = lo(SEQSTAT_EXCAUSE);
+	r6.h = hi(SEQSTAT_EXCAUSE);
+	r7 = r7 & r6;
+	r6 = 0x25;
+	CC = R7 == R6;
+	if CC JUMP _double_fault;
+#endif
+
 	DEBUG_HWTRACE_RESTORE(p5, r7)
 	RESTORE_ALL_SYS
 	SP = EX_SCRATCH_REG;
@@ -136,11 +148,8 @@ ENTRY(_ex_icplb_miss)
 ENDPROC(_ex_icplb_miss)
 
 ENTRY(_ex_syscall)
-	(R7:6,P5:4) = [sp++];
-	ASTAT = [sp++];
 	raise 15;		/* invoked by TRAP #0, for sys call */
-	sp = EX_SCRATCH_REG;
-	rtx
+	jump.s _bfin_return_from_exception;
 ENDPROC(_ex_syscall)
 
 ENTRY(_ex_soft_bp)
@@ -250,6 +259,29 @@ ENTRY(_bfin_return_from_exception)
 	R7=LC1;
 	LC1=R7;
 #endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* While we were processing the current exception,
+	 * did we cause another, and double fault?
+	 */
+	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
+	r6.l = lo(SEQSTAT_EXCAUSE);
+	r6.h = hi(SEQSTAT_EXCAUSE);
+	r7 = r7 & r6;
+	r6 = 0x25;
+	CC = R7 == R6;
+	if CC JUMP _double_fault;
+
+	/* Did we cause a HW error? */
+	p5.l = lo(ILAT);
+	p5.h = hi(ILAT);
+	r6 = [p5];
+	r7 = 0x20;		/* Did I just cause anther HW error? */
+	r7 = r7 & r1;
+	CC = R7 == R6;
+	if CC JUMP _double_fault;
+#endif
+
 	(R7:6,P5:4) = [sp++];
 	ASTAT = [sp++];
 	sp = EX_SCRATCH_REG;
@@ -292,6 +324,14 @@ ENTRY(_ex_trap_c)
 	[p4] = p5;
 	csync;
 
+#ifndef CONFIG_DEBUG_DOUBLEFAULT
+	/*
+	 * Save these registers, as they are only valid in exception context
+	 *  (where we are now - as soon as we defer to IRQ5, they can change)
+	 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+	 * but they are not very interesting, so don't save them
+	 */
+
 	p4.l = lo(DCPLB_FAULT_ADDR);
 	p4.h = hi(DCPLB_FAULT_ADDR);
 	r7 = [p4];
@@ -304,12 +344,11 @@ ENTRY(_ex_trap_c)
 	p5.l = _saved_icplb_fault_addr;
 	[p5] = r7;
 
-	p4.l = _excpt_saved_stuff;
-	p4.h = _excpt_saved_stuff;
-
 	r6 = retx;
+	p4.l = _saved_retx;
+	p4.h = _saved_retx;
 	[p4] = r6;
-
+#endif
 	r6 = SYSCFG;
 	[p4 + 4] = r6;
 	BITCLR(r6, 0);
@@ -327,59 +366,56 @@ ENTRY(_ex_trap_c)
 	r6 = 0x3f;
 	sti r6;
 
-	(R7:6,P5:4) = [sp++];
-	ASTAT = [sp++];
-	SP = EX_SCRATCH_REG;
 	raise 5;
-	rtx;
+	jump.s _bfin_return_from_exception;
 ENDPROC(_ex_trap_c)
 
 /* We just realized we got an exception, while we were processing a different
  * exception. This is a unrecoverable event, so crash
  */
 ENTRY(_double_fault)
-        /* Turn caches & protection off, to ensure we don't get any more
-         * double exceptions
-         */
-
-        P4.L = LO(IMEM_CONTROL);
-        P4.H = HI(IMEM_CONTROL);
-
-        R5 = [P4];              /* Control Register*/
-        BITCLR(R5,ENICPLB_P);
-        SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
-        .align 8;
-        [P4] = R5;
-        SSYNC;
-
-        P4.L = LO(DMEM_CONTROL);
-        P4.H = HI(DMEM_CONTROL);
-        R5 = [P4];
-        BITCLR(R5,ENDCPLB_P);
-        SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
-        .align 8;
-        [P4] = R5;
-        SSYNC;
-
-        /* Fix up the stack */
-        (R7:6,P5:4) = [sp++];
-        ASTAT = [sp++];
-        SP = EX_SCRATCH_REG;
-
-        /* We should be out of the exception stack, and back down into
-         * kernel or user space stack
-         */
-        SAVE_ALL_SYS
+	/* Turn caches & protection off, to ensure we don't get any more
+	 * double exceptions
+	 */
+
+	P4.L = LO(IMEM_CONTROL);
+	P4.H = HI(IMEM_CONTROL);
+
+	R5 = [P4];              /* Control Register*/
+	BITCLR(R5,ENICPLB_P);
+	SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+
+	P4.L = LO(DMEM_CONTROL);
+	P4.H = HI(DMEM_CONTROL);
+	R5 = [P4];
+	BITCLR(R5,ENDCPLB_P);
+	SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+
+	/* Fix up the stack */
+	(R7:6,P5:4) = [sp++];
+	ASTAT = [sp++];
+	SP = EX_SCRATCH_REG;
+
+	/* We should be out of the exception stack, and back down into
+	 * kernel or user space stack
+	 */
+	SAVE_ALL_SYS
 
 	/* The dumping functions expect the return address in the RETI
 	 * slot.  */
 	r6 = retx;
 	[sp + PT_PC] = r6;
 
-        r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
-        SP += -12;
-        call _double_fault_c;
-        SP += 12;
+	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
+	SP += -12;
+	call _double_fault_c;
+	SP += 12;
 .L_double_fault_panic:
         JUMP .L_double_fault_panic
 
@@ -388,8 +424,8 @@ ENDPROC(_double_fault)
 ENTRY(_exception_to_level5)
 	SAVE_ALL_SYS
 
-	p4.l = _excpt_saved_stuff;
-	p4.h = _excpt_saved_stuff;
+	p4.l = _saved_retx;
+	p4.h = _saved_retx;
 	r6 = [p4];
 	[sp + PT_PC] = r6;
 
@@ -420,6 +456,17 @@ ENTRY(_exception_to_level5)
 	call _trap_c;
 	SP += 12;
 
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* Grab ILAT */
+	p2.l = lo(ILAT);
+	p2.h = hi(ILAT);
+	r0 = [p2];
+	r1 = 0x20;  /* Did I just cause anther HW error? */
+	r0 = r0 & r1;
+	CC = R0 == R1;
+	if CC JUMP _double_fault;
+#endif
+
 	call _ret_from_exception;
 	RESTORE_ALL_SYS
 	rti;
@@ -436,7 +483,39 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	/* Try to deal with syscalls quickly.  */
 	[--sp] = ASTAT;
 	[--sp] = (R7:6,P5:4);
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/*
+	 * Save these registers, as they are only valid in exception context
+	 * (where we are now - as soon as we defer to IRQ5, they can change)
+	 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+	 * but they are not very interesting, so don't save them
+	 */
+
+	p4.l = lo(DCPLB_FAULT_ADDR);
+	p4.h = hi(DCPLB_FAULT_ADDR);
+	r7 = [p4];
+	p5.h = _saved_dcplb_fault_addr;
+	p5.l = _saved_dcplb_fault_addr;
+	[p5] = r7;
+
+	r7 = [p4 + (ICPLB_FAULT_ADDR - DCPLB_FAULT_ADDR)];
+	p5.h = _saved_icplb_fault_addr;
+	p5.l = _saved_icplb_fault_addr;
+	[p5] = r7;
+
+	p4.l = _saved_retx;
+	p4.h = _saved_retx;
+	r6 = retx;
+	[p4] = r6;
+
 	r7 = SEQSTAT;		/* reason code is in bit 5:0 */
+	p4.l = _saved_seqstat;
+	p4.h = _saved_seqstat;
+	[p4] = r7;
+#else
+	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
+#endif
 	r6.l = lo(SEQSTAT_EXCAUSE);
 	r6.h = hi(SEQSTAT_EXCAUSE);
 	r7 = r7 & r6;
@@ -1432,15 +1511,7 @@ ENTRY(_sys_call_table)
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
 	.endr
-
-	/*
-	 * Used to save the real RETX, IMASK and SYSCFG when temporarily
-	 * storing safe values across the transition from exception to IRQ5.
-	 */
-_excpt_saved_stuff:
-	.long 0;
-	.long 0;
-	.long 0;
+END(_sys_call_table)
 
 _exception_stack:
 	.rept 1024
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index 191b4e974c4b..7cb21cfcbf28 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -90,12 +90,46 @@ ENTRY(__start)
 	[p0] = R0;
 	SSYNC;
 
-	/* Save RETX, in case of doublefault */
-	p0.l = ___retx;
-	p0.h = ___retx;
+	/* in case of double faults, save a few things */
+	p0.l = _init_retx;
+	p0.h = _init_retx;
 	R0 = RETX;
 	[P0] = R0;
 
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* Only save these if we are storing them,
+	 * This happens here, since L1 gets clobbered
+	 * below
+	 */
+	p0.l = _saved_retx;
+	p0.h = _saved_retx;
+	p1.l = _init_saved_retx;
+	p1.h = _init_saved_retx;
+	r0 = [p0];
+	[p1] = r0;
+
+	p0.l = _saved_dcplb_fault_addr;
+	p0.h = _saved_dcplb_fault_addr;
+	p1.l = _init_saved_dcplb_fault_addr;
+	p1.h = _init_saved_dcplb_fault_addr;
+	r0 = [p0];
+	[p1] = r0;
+
+	p0.l = _saved_icplb_fault_addr;
+	p0.h = _saved_icplb_fault_addr;
+	p1.l = _init_saved_icplb_fault_addr;
+	p1.h = _init_saved_icplb_fault_addr;
+	r0 = [p0];
+	[p1] = r0;
+
+	p0.l = _saved_seqstat;
+	p0.h = _saved_seqstat;
+	p1.l = _init_saved_seqstat;
+	p1.h = _init_saved_seqstat;
+	r0 = [p0];
+	[p1] = r0;
+#endif
+
 	/* Initialize stack pointer */
 	sp.l = lo(INITIAL_STACK);
 	sp.h = hi(INITIAL_STACK);