diff options
author | Bartlomiej Sieka <tur@semihalf.com> | 2008-04-02 16:26:02 +0200 |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2008-04-03 13:11:12 +0200 |
commit | 115e1adca3b75a82f24da8b2cc9386eb5b7e2cff (patch) | |
tree | d8bd9c49f3d32df2b216342001ee7617b76ac151 /arch | |
parent | [POWERPC] Fix rtas_flash procfs interface (diff) | |
download | linux-115e1adca3b75a82f24da8b2cc9386eb5b7e2cff.tar.xz linux-115e1adca3b75a82f24da8b2cc9386eb5b7e2cff.zip |
[POWERPC] mpc5200: Amalgamated DTS fixes and updates
DTS updates that fix booting problems on mpc5200-based boards:
- change to ethernet reg property
- addition of mdio and phy nodes
- removal of pci node (Motion-Pro board)
Other DTS updates:
- update i2c device tree nodes
- add lpb bus node and flash device (without partitions defined)
- add rtc i2c nodes
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/powerpc/boot/dts/cm5200.dts | 37 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/motionpro.dts | 63 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/tqm5200.dts | 42 |
3 files changed, 112 insertions, 30 deletions
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 30737eafe68e..c6ca6319e4f7 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -212,13 +212,30 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; @@ -231,4 +248,22 @@ reg = <8000 4000>; }; }; + + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 2000000>; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 2000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 76951ab038ee..2b0dde058f8e 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -148,7 +148,6 @@ interrupt-parent = <&mpc5200_pic>; }; - spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <f00 20>; @@ -209,10 +208,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@2 { + device_type = "ethernet-phy"; + reg = <2>; + }; }; ata@3a00 { @@ -223,11 +237,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <68>; + }; }; sram@8000 { @@ -240,7 +262,8 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 50000000 00010000 + ranges = <0 0 ff000000 01000000 + 1 0 50000000 00010000 2 0 50010000 00010000 3 0 50020000 00010000>; @@ -271,31 +294,15 @@ compatible = "promess,pro_module_dio"; reg = <3 800 2>; }; - }; - pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = <f0000d00 100>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot - c000 0 0 2 &mpc5200_pic 1 1 3 - c000 0 0 3 &mpc5200_pic 1 2 3 - c000 0 0 4 &mpc5200_pic 1 3 3 - - c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot - c800 0 0 2 &mpc5200_pic 1 2 3 - c800 0 0 3 &mpc5200_pic 1 3 3 - c800 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 01000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; }; }; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index c86464f007da..65bcea6a0173 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -127,10 +127,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; ata@3a00 { @@ -141,11 +156,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1307"; + reg = <68>; + }; }; sram@8000 { @@ -154,6 +177,23 @@ }; }; + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; + pci@f0000d00 { #interrupt-cells = <1>; #size-cells = <2>; |