Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu arch update from Greg Ungerer: "Quite a varied set of changes this time. - A little more merge cleanup, this time the assembler entry code. - New sub-architecture support for the ColdFire 5251/5253 and 5441x CPU families. - Specific clk support code for the ColdFire 520x and 532x CPU familes. - Refactoring of the ColdFire GPIO support. - PCI bus support for some ColdFire CPUS that have PCI hardware (54xx family). This showed up a few problems with ColdFire cache, allocating coherent memory and bi-directional DMA support. Fixes for those too." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits) m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs m68k: add PCI bus code support for the ColdFire M54xx SoC family m68k: add IO access definitions to support PCI on ColdFire platforms m68k: add PCI bus support definitions for the ColdFire M54xx SoC family m68k: common PCI support definitions and code m68k: add support for DMA_BIDIRECTIONAL in dma support functions m68k: fix ColdFire clear cache operation m68k: use simpler dma_alloc_coherent() for ColdFire CPUs m68knommu: platform support for 8390 based ethernet used on some boards m68knommu: Add clk definitions for m532x. m68knommu: Add clk definitions for m520x. m68knommu: Add rtc device for m5441x. m68knommu: add definitions for the third interrupt controller on devices that don't have a third interrupt controller. m68knommu: Add support for the Coldfire m5441x. m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1 coldfire-qspi: Add support for the Coldfire 5251/5253. m68knommu: Add support for the Coldfire 5251/5253 m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate mcf_gpio_chips. m68k: merge the MMU and non-MMU versions of the entry.S code m68k: use jbsr to call functions instead of bsrl ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2012-07-25 02:20:51 +0200
committer: Linus Torvalds <torvalds@linux-foundation.org> 2012-07-25 02:20:51 +0200
commit: 2c05b2c838e7adaabb7265ad5d5b632315c20821 (patch)
tree: cb29c9de665f216825a7932afb7c6329ab9ae158 /arch
parent: Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma (diff)
parent: m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs (diff)
download: linux-2c05b2c838e7adaabb7265ad5d5b632315c20821.tar.xz
linux-2c05b2c838e7adaabb7265ad5d5b632315c20821.zip
56 files changed, 2984 insertions, 1125 deletions
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index 3adb499584fb..ffc0601a2a19 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -48,6 +48,13 @@ config ISA
 config GENERIC_ISA_DMA
 	def_bool ISA
 
+config PCI
+	bool "PCI support"
+	depends on M54xx
+	help
+	  Enable the PCI bus. Support for the PCI bus hardware built into the
+	  ColdFire 547x and 548x processors.
+
 source "drivers/pci/Kconfig"
 
 source "drivers/zorro/Kconfig"
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 2b53254ad994..43a9f8f1b8eb 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -23,7 +23,7 @@ config M68KCLASSIC
 config COLDFIRE
 	bool "Coldfire CPU family support"
 	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_MULDIV64
@@ -167,6 +167,14 @@ config M5249
 	help
 	  Motorola ColdFire 5249 processor support.
 
+config M525x
+	bool "MCF525x"
+	depends on !MMU
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Freescale (Motorola) Coldfire 5251/5253 processor support.
+
 config M527x
 	bool
 
@@ -253,6 +261,14 @@ config M548x
 	help
 	  Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
 
+config M5441x
+	bool "MCF5441x"
+	depends on !MMU
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CACHE_CB
+	help
+	  Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
+
 endif # COLDFIRE
 
 
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index b7f2e2d5cd2e..7636751f2f87 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -41,6 +41,7 @@ cpuflags-$(CONFIG_M68030)	:=
 cpuflags-$(CONFIG_M68020)	:=
 cpuflags-$(CONFIG_M68360)	:= -m68332
 cpuflags-$(CONFIG_M68000)	:= -m68000
+cpuflags-$(CONFIG_M5441x)	:= $(call cc-option,-mcpu=54455,-mcfv4e)
 cpuflags-$(CONFIG_M54xx)	:= $(call cc-option,-mcpu=5475,-m5200)
 cpuflags-$(CONFIG_M5407)	:= $(call cc-option,-mcpu=5407,-m5200)
 cpuflags-$(CONFIG_M532x)	:= $(call cc-option,-mcpu=532x,-m5307)
@@ -50,6 +51,7 @@ cpuflags-$(CONFIG_M5275)	:= $(call cc-option,-mcpu=5275,-m5307)
 cpuflags-$(CONFIG_M5272)	:= $(call cc-option,-mcpu=5272,-m5307)
 cpuflags-$(CONFIG_M5271)	:= $(call cc-option,-mcpu=5271,-m5307)
 cpuflags-$(CONFIG_M523x)	:= $(call cc-option,-mcpu=523x,-m5307)
+cpuflags-$(CONFIG_M525x)	:= $(call cc-option,-mcpu=5253,-m5200)
 cpuflags-$(CONFIG_M5249)	:= $(call cc-option,-mcpu=5249,-m5200)
 cpuflags-$(CONFIG_M520x)	:= $(call cc-option,-mcpu=5208,-m5200)
 cpuflags-$(CONFIG_M5206e)	:= $(call cc-option,-mcpu=5206e,-m5200)
diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h
index 8104bd874649..fa2c3d681d84 100644
--- a/arch/m68k/include/asm/cacheflush_mm.h
+++ b/arch/m68k/include/asm/cacheflush_mm.h
@@ -16,7 +16,48 @@
 #define DCACHE_MAX_ADDR	0
 #define DCACHE_SETMASK	0
 #endif
+#ifndef CACHE_MODE
+#define	CACHE_MODE	0
+#define	CACR_ICINVA	0
+#define	CACR_DCINVA	0
+#define	CACR_BCINVA	0
+#endif
+
+/*
+ * ColdFire architecture has no way to clear individual cache lines, so we
+ * are stuck invalidating all the cache entries when we want a clear operation.
+ */
+static inline void clear_cf_icache(unsigned long start, unsigned long end)
+{
+	__asm__ __volatile__ (
+		"movec	%0,%%cacr\n\t"
+		"nop"
+		:
+		: "r" (CACHE_MODE | CACR_ICINVA | CACR_BCINVA));
+}
+
+static inline void clear_cf_dcache(unsigned long start, unsigned long end)
+{
+	__asm__ __volatile__ (
+		"movec	%0,%%cacr\n\t"
+		"nop"
+		:
+		: "r" (CACHE_MODE | CACR_DCINVA));
+}
 
+static inline void clear_cf_bcache(unsigned long start, unsigned long end)
+{
+	__asm__ __volatile__ (
+		"movec	%0,%%cacr\n\t"
+		"nop"
+		:
+		: "r" (CACHE_MODE | CACR_ICINVA | CACR_BCINVA | CACR_DCINVA));
+}
+
+/*
+ * Use the ColdFire cpushl instruction to push (and invalidate) cache lines.
+ * The start and end addresses are cache line numbers not memory addresses.
+ */
 static inline void flush_cf_icache(unsigned long start, unsigned long end)
 {
 	unsigned long set;
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
index 6fbdfe895104..0ff3fc6a6d9a 100644
--- a/arch/m68k/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma.h
@@ -33,7 +33,9 @@
  * Set number of channels of DMA on ColdFire for different implementations.
  */
 #if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
-	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+	defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
+	defined(CONFIG_M528x) || defined(CONFIG_M525x)
+
 #define MAX_M68K_DMA_CHANNELS 4
 #elif defined(CONFIG_M5272)
 #define MAX_M68K_DMA_CHANNELS 1
@@ -486,6 +488,10 @@ static __inline__ int get_dma_residue(unsigned int dmanr)
 extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
 extern void free_dma(unsigned int dmanr);	/* release it again */
 
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
 #define isa_dma_bridge_buggy    (0)
+#endif
 
 #endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
index 00d0071de4c3..4395ffc51fdb 100644
--- a/arch/m68k/include/asm/gpio.h
+++ b/arch/m68k/include/asm/gpio.h
@@ -17,170 +17,9 @@
 #define coldfire_gpio_h
 
 #include <linux/io.h>
-#include <asm-generic/gpio.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-
-/*
- * The Freescale Coldfire family is quite varied in how they implement GPIO.
- * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
- * only one port, others have multiple ports; some have a single data latch
- * for both input and output, others have a separate pin data register to read
- * input; some require a read-modify-write access to change an output, others
- * have set and clear registers for some of the outputs; Some have all the
- * GPIOs in a single control area, others have some GPIOs implemented in
- * different modules.
- *
- * This implementation attempts accommodate the differences while presenting
- * a generic interface that will optimize to as few instructions as possible.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-    defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
-    defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M532x) || defined(CONFIG_M54xx)
-
-/* These parts have GPIO organized by 8 bit ports */
-
-#define MCFGPIO_PORTTYPE		u8
-#define MCFGPIO_PORTSIZE		8
-#define mcfgpio_read(port)		__raw_readb(port)
-#define mcfgpio_write(data, port)	__raw_writeb(data, port)
-
-#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
-
-/* These parts have GPIO organized by 16 bit ports */
-
-#define MCFGPIO_PORTTYPE		u16
-#define MCFGPIO_PORTSIZE		16
-#define mcfgpio_read(port)		__raw_readw(port)
-#define mcfgpio_write(data, port)	__raw_writew(data, port)
-
-#elif defined(CONFIG_M5249)
-
-/* These parts have GPIO organized by 32 bit ports */
-
-#define MCFGPIO_PORTTYPE		u32
-#define MCFGPIO_PORTSIZE		32
-#define mcfgpio_read(port)		__raw_readl(port)
-#define mcfgpio_write(data, port)	__raw_writel(data, port)
-
-#endif
-
-#define mcfgpio_bit(gpio)		(1 << ((gpio) %  MCFGPIO_PORTSIZE))
-#define mcfgpio_port(gpio)		((gpio) / MCFGPIO_PORTSIZE)
-
-#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
-    defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
-/*
- * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
- * read-modify-write to change an output and a GPIO module which has separate
- * set/clr registers to directly change outputs with a single write access.
- */
-#if defined(CONFIG_M528x)
-/*
- * The 528x also has GPIOs in other modules (GPT, QADC) which use
- * read-modify-write as well as those controlled by the EPORT and GPIO modules.
- */
-#define MCFGPIO_SCR_START		40
-#else
-#define MCFGPIO_SCR_START		8
-#endif
-
-#define MCFGPIO_SETR_PORT(gpio)		(MCFGPIO_SETR + \
-					mcfgpio_port(gpio - MCFGPIO_SCR_START))
-
-#define MCFGPIO_CLRR_PORT(gpio)		(MCFGPIO_CLRR + \
-					mcfgpio_port(gpio - MCFGPIO_SCR_START))
-#else
-
-#define MCFGPIO_SCR_START		MCFGPIO_PIN_MAX
-/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
-#define MCFGPIO_SETR_PORT(gpio)		0
-#define MCFGPIO_CLRR_PORT(gpio)		0
-
-#endif
-/*
- * Coldfire specific helper functions
- */
-
-/* return the port pin data register for a gpio */
-static inline u32 __mcf_gpio_ppdr(unsigned gpio)
-{
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-    defined(CONFIG_M5307) || defined(CONFIG_M5407)
-	return MCFSIM_PADAT;
-#elif defined(CONFIG_M5272)
-	if (gpio < 16)
-		return MCFSIM_PADAT;
-	else if (gpio < 32)
-		return MCFSIM_PBDAT;
-	else
-		return MCFSIM_PCDAT;
-#elif defined(CONFIG_M5249)
-	if (gpio < 32)
-		return MCFSIM2_GPIOREAD;
-	else
-		return MCFSIM2_GPIO1READ;
-#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
-      defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
-	if (gpio < 8)
-		return MCFEPORT_EPPDR;
-#if defined(CONFIG_M528x)
-	else if (gpio < 16)
-		return MCFGPTA_GPTPORT;
-	else if (gpio < 24)
-		return MCFGPTB_GPTPORT;
-	else if (gpio < 32)
-		return MCFQADC_PORTQA;
-	else if (gpio < 40)
-		return MCFQADC_PORTQB;
-#endif
-	else
-		return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
-#else
-	return 0;
-#endif
-}
-
-/* return the port output data register for a gpio */
-static inline u32 __mcf_gpio_podr(unsigned gpio)
-{
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-    defined(CONFIG_M5307) || defined(CONFIG_M5407)
-	return MCFSIM_PADAT;
-#elif defined(CONFIG_M5272)
-	if (gpio < 16)
-		return MCFSIM_PADAT;
-	else if (gpio < 32)
-		return MCFSIM_PBDAT;
-	else
-		return MCFSIM_PCDAT;
-#elif defined(CONFIG_M5249)
-	if (gpio < 32)
-		return MCFSIM2_GPIOWRITE;
-	else
-		return MCFSIM2_GPIO1WRITE;
-#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
-      defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
-	if (gpio < 8)
-		return MCFEPORT_EPDR;
-#if defined(CONFIG_M528x)
-	else if (gpio < 16)
-		return MCFGPTA_GPTPORT;
-	else if (gpio < 24)
-		return MCFGPTB_GPTPORT;
-	else if (gpio < 32)
-		return MCFQADC_PORTQA;
-	else if (gpio < 40)
-		return MCFQADC_PORTQB;
-#endif
-	else
-		return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
-#else
-	return 0;
-#endif
-}
-
+#include <asm/mcfgpio.h>
 /*
  * The Generic GPIO functions
  *
@@ -191,7 +30,7 @@ static inline u32 __mcf_gpio_podr(unsigned gpio)
 static inline int gpio_get_value(unsigned gpio)
 {
 	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
-		return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+		return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
 	else
 		return __gpio_get_value(gpio);
 }
@@ -204,12 +43,12 @@ static inline void gpio_set_value(unsigned gpio, int value)
 			MCFGPIO_PORTTYPE data;
 
 			local_irq_save(flags);
-			data = mcfgpio_read(__mcf_gpio_podr(gpio));
+			data = mcfgpio_read(__mcfgpio_podr(gpio));
 			if (value)
 				data |= mcfgpio_bit(gpio);
 			else
 				data &= ~mcfgpio_bit(gpio);
-			mcfgpio_write(data, __mcf_gpio_podr(gpio));
+			mcfgpio_write(data, __mcfgpio_podr(gpio));
 			local_irq_restore(flags);
 		} else {
 			if (value)
@@ -225,8 +64,14 @@ static inline void gpio_set_value(unsigned gpio, int value)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE
-		: __gpio_to_irq(gpio);
+#if defined(MCFGPIO_IRQ_MIN)
+	if ((gpio >= MCFGPIO_IRQ_MIN) && (gpio < MCFGPIO_IRQ_MAX))
+#else
+	if (gpio < MCFGPIO_IRQ_MAX)
+#endif
+		return gpio + MCFGPIO_IRQ_VECBASE;
+	else
+		return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned irq)
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index fa4324bcf566..a6686d26fe17 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -65,7 +65,53 @@
 
 
 
-#ifdef CONFIG_ISA
+#if defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE)
+
+#define HAVE_ARCH_PIO_SIZE
+#define PIO_OFFSET	0
+#define PIO_MASK	0xffff
+#define PIO_RESERVED	0x10000
+
+u8 mcf_pci_inb(u32 addr);
+u16 mcf_pci_inw(u32 addr);
+u32 mcf_pci_inl(u32 addr);
+void mcf_pci_insb(u32 addr, u8 *buf, u32 len);
+void mcf_pci_insw(u32 addr, u16 *buf, u32 len);
+void mcf_pci_insl(u32 addr, u32 *buf, u32 len);
+
+void mcf_pci_outb(u8 v, u32 addr);
+void mcf_pci_outw(u16 v, u32 addr);
+void mcf_pci_outl(u32 v, u32 addr);
+void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len);
+void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len);
+void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len);
+
+#define	inb	mcf_pci_inb
+#define	inb_p	mcf_pci_inb
+#define	inw	mcf_pci_inw
+#define	inw_p	mcf_pci_inw
+#define	inl	mcf_pci_inl
+#define	inl_p	mcf_pci_inl
+#define	insb	mcf_pci_insb
+#define	insw	mcf_pci_insw
+#define	insl	mcf_pci_insl
+
+#define	outb	mcf_pci_outb
+#define	outb_p	mcf_pci_outb
+#define	outw	mcf_pci_outw
+#define	outw_p	mcf_pci_outw
+#define	outl	mcf_pci_outl
+#define	outl_p	mcf_pci_outl
+#define	outsb	mcf_pci_outsb
+#define	outsw	mcf_pci_outsw
+#define	outsl	mcf_pci_outsl
+
+#define readb(addr)	in_8(addr)
+#define writeb(v, addr)	out_8((addr), (v))
+#define readw(addr)	in_le16(addr)
+#define writew(v, addr)	out_le16((addr), (v))
+
+#elif defined(CONFIG_ISA)
 
 #if MULTI_ISA == 0
 #undef MULTI_ISA
@@ -340,4 +386,6 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int
  */
 #define xlate_dev_kmem_ptr(p)	p
 
+#define ioport_map(port, nr)	((void __iomem *)(port))
+
 #endif /* _IO_H */
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 17f2aab9cf97..db3f8ee4a6c6 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -42,6 +42,9 @@
 #define MCFINTC1_SIMR       (0)
 #define MCFINTC1_CIMR       (0)
 #define	MCFINTC1_ICR0       (0)
+#define MCFINTC2_SIMR       (0)
+#define MCFINTC2_CIMR       (0)
+#define MCFINTC2_ICR0       (0)
 
 #define MCFINT_VECBASE      64
 #define MCFINT_UART0        26          /* Interrupt number for UART0 */
@@ -62,6 +65,7 @@
 #define MCF_IRQ_FECENTC0    (MCFINT_VECBASE + MCFINT_FECENTC0)
 
 #define	MCF_IRQ_QSPI	    (MCFINT_VECBASE + MCFINT_QSPI)
+#define MCF_IRQ_PIT1        (MCFINT_VECBASE + MCFINT_PIT1)
 
 /*
  *  SDRAM configuration registers.
@@ -186,5 +190,15 @@
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
+/*
+ *  Power Management.
+ */
+#define MCFPM_WCR		0xfc040013
+#define MCFPM_PPMSR0		0xfc04002c
+#define MCFPM_PPMCR0		0xfc04002d
+#define MCFPM_PPMHR0		0xfc040030
+#define MCFPM_PPMLR0		0xfc040034
+#define MCFPM_LPCR		0xfc0a0007
+
 /****************************************************************************/
 #endif  /* m520xsim_h */
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 075062d4eecd..91d3abc3f2a5 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -52,6 +52,7 @@
 #define	MCF_IRQ_FECENTC0	(MCFINT_VECBASE + MCFINT_FECENTC0)
 
 #define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
+#define MCF_IRQ_PIT1		(MCFINT_VECBASE + MCFINT_PIT1)
 
 /*
  *	SDRAM configuration registers.
diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h
new file mode 100644
index 000000000000..6da24f653902
--- /dev/null
+++ b/arch/m68k/include/asm/m525xsim.h
@@ -0,0 +1,194 @@
+/****************************************************************************/
+
+/*
+ *	m525xsim.h -- ColdFire 525x System Integration Module support.
+ *
+ *	(C) Copyright 2012, Steven king <sfking@fdwdc.com>
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m525xsim_h
+#define m525xsim_h
+/****************************************************************************/
+
+#define CPU_NAME		"COLDFIRE(m525x)"
+#define CPU_INSTR_PER_JIFFY	3
+#define MCF_BUSCLK		(MCF_CLK / 2)
+
+#include <asm/m52xxacr.h>
+
+/*
+ *	The 525x has a second MBAR region, define its address.
+ */
+#define MCF_MBAR2		0x80000000
+
+/*
+ *	Define the 525x SIM register set addresses.
+ */
+#define MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+
+#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
+#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
+#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
+
+/*
+ * Secondary Interrupt Controller (in MBAR2)
+*/
+#define MCFINTC2_INTBASE	(MCF_MBAR2 + 0x168)	/* Base Vector Reg */
+#define MCFINTC2_INTPRI1	(MCF_MBAR2 + 0x140)	/* 0-7 priority */
+#define MCFINTC2_INTPRI2	(MCF_MBAR2 + 0x144)	/* 8-15 priority */
+#define MCFINTC2_INTPRI3	(MCF_MBAR2 + 0x148)	/* 16-23 priority */
+#define MCFINTC2_INTPRI4	(MCF_MBAR2 + 0x14c)	/* 24-31 priority */
+#define MCFINTC2_INTPRI5	(MCF_MBAR2 + 0x150)	/* 32-39 priority */
+#define MCFINTC2_INTPRI6	(MCF_MBAR2 + 0x154)	/* 40-47 priority */
+#define MCFINTC2_INTPRI7	(MCF_MBAR2 + 0x158)	/* 48-55 priority */
+#define MCFINTC2_INTPRI8	(MCF_MBAR2 + 0x15c)	/* 56-63 priority */
+
+#define MCFINTC2_INTPRI_REG(i)	(MCFINTC2_INTPRI1 + \
+				((((i) - MCFINTC2_VECBASE) / 8) * 4))
+#define MCFINTC2_INTPRI_BITS(b, i)	((b) << (((i) % 8) * 4))
+
+/*
+ *	Timer module.
+ */
+#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
+#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
+
+/*
+ *	UART module.
+ */
+#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
+
+/*
+ *	QSPI module.
+ */
+#define MCFQSPI_BASE		(MCF_MBAR + 0x300)	/* Base address QSPI */
+#define MCFQSPI_SIZE		0x40			/* Register set size */
+
+
+#define MCFQSPI_CS0		15
+#define MCFQSPI_CS1		16
+#define MCFQSPI_CS2		24
+#define MCFQSPI_CS3		28
+
+/*
+ *	I2C module.
+ */
+#define MCFI2C_BASE0		(MCF_MBAR + 0x280)	/* Base addreess I2C0 */
+#define MCFI2C_SIZE0		0x20			/* Register set size */
+
+#define MCFI2C_BASE1		(MCF_MBAR2 + 0x440)	/* Base addreess I2C1 */
+#define MCFI2C_SIZE1		0x20			/* Register set size */
+/*
+ *	DMA unit base addresses.
+ */
+#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
+#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
+#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
+#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define MCFSIM_I2CICR		MCFSIM_ICR3	/* I2C ICR */
+#define MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+#define MCFSIM_QSPIICR		MCFSIM_ICR10	/* QSPI ICR */
+
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define MCF_IRQ_QSPI		28		/* QSPI, Level 4 */
+#define MCF_IRQ_I2C0		29
+#define MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+
+#define MCF_IRQ_UART0		73		/* UART0 */
+#define MCF_IRQ_UART1		74		/* UART1 */
+
+/*
+ * Define the base interrupt for the second interrupt controller.
+ * We set it to 128, out of the way of the base interrupts, and plenty
+ * of room for its 64 interrupts.
+ */
+#define MCFINTC2_VECBASE	128
+
+#define MCF_IRQ_GPIO0		(MCFINTC2_VECBASE + 32)
+#define MCF_IRQ_GPIO1		(MCFINTC2_VECBASE + 33)
+#define MCF_IRQ_GPIO2		(MCFINTC2_VECBASE + 34)
+#define MCF_IRQ_GPIO3		(MCFINTC2_VECBASE + 35)
+#define MCF_IRQ_GPIO4		(MCFINTC2_VECBASE + 36)
+#define MCF_IRQ_GPIO5		(MCFINTC2_VECBASE + 37)
+#define MCF_IRQ_GPIO6		(MCFINTC2_VECBASE + 38)
+
+#define MCF_IRQ_USBWUP		(MCFINTC2_VECBASE + 40)
+#define MCF_IRQ_I2C1		(MCFINTC2_VECBASE + 62)
+
+/*
+ *	General purpose IO registers (in MBAR2).
+ */
+#define MCFSIM2_GPIOREAD	(MCF_MBAR2 + 0x000)	/* GPIO read values */
+#define MCFSIM2_GPIOWRITE	(MCF_MBAR2 + 0x004)	/* GPIO write values */
+#define MCFSIM2_GPIOENABLE	(MCF_MBAR2 + 0x008)	/* GPIO enabled */
+#define MCFSIM2_GPIOFUNC	(MCF_MBAR2 + 0x00C)	/* GPIO function */
+#define MCFSIM2_GPIO1READ	(MCF_MBAR2 + 0x0B0)	/* GPIO1 read values */
+#define MCFSIM2_GPIO1WRITE	(MCF_MBAR2 + 0x0B4)	/* GPIO1 write values */
+#define MCFSIM2_GPIO1ENABLE	(MCF_MBAR2 + 0x0B8)	/* GPIO1 enabled */
+#define MCFSIM2_GPIO1FUNC	(MCF_MBAR2 + 0x0BC)	/* GPIO1 function */
+
+#define MCFSIM2_GPIOINTSTAT	(MCF_MBAR2 + 0xc0)	/* GPIO intr status */
+#define MCFSIM2_GPIOINTCLEAR	(MCF_MBAR2 + 0xc0)	/* GPIO intr clear */
+#define MCFSIM2_GPIOINTENABLE	(MCF_MBAR2 + 0xc4)	/* GPIO intr enable */
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX		64
+#define MCFGPIO_IRQ_MAX		7
+#define MCFGPIO_IRQ_VECBASE	MCF_IRQ_GPIO0
+
+/****************************************************************************/
+#endif	/* m525xsim_h */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 83db8106f50a..71aa5104d3d6 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -60,6 +60,7 @@
 #define	MCF_IRQ_FECENTC1	(MCFINT2_VECBASE + MCFINT2_FECENTC1)
 
 #define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
+#define MCF_IRQ_PIT1		(MCFINT_VECBASE + MCFINT_PIT1)
 
 /*
  *	SDRAM configuration registers.
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 497c31c803ff..4acb3c0a642e 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -52,7 +52,7 @@
 #define	MCF_IRQ_FECENTC0	(MCFINT_VECBASE + MCFINT_FECENTC0)
 
 #define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
-
+#define MCF_IRQ_PIT1		(MCFINT_VECBASE + MCFINT_PIT1)
 /*
  *	SDRAM configuration registers.
  */
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 29b66e21413a..5ca7b298c6eb 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -82,6 +82,9 @@
 #define	MCFINTC1_SIMR		0xFC04C01C
 #define	MCFINTC1_CIMR		0xFC04C01D
 #define	MCFINTC1_ICR0		0xFC04C040
+#define MCFINTC2_SIMR		(0)
+#define MCFINTC2_CIMR		(0)
+#define MCFINTC2_ICR0		(0)
 
 #define MCFSIM_ICR_TIMER1	(0xFC048040+32)
 #define MCFSIM_ICR_TIMER2	(0xFC048040+33)
@@ -135,6 +138,20 @@
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
+
+/*
+ * Power Management
+ */
+#define MCFPM_WCR		0xfc040013
+#define MCFPM_PPMSR0		0xfc04002c
+#define MCFPM_PPMCR0		0xfc04002d
+#define MCFPM_PPMSR1		0xfc04002e
+#define MCFPM_PPMCR1		0xfc04002f
+#define MCFPM_PPMHR0		0xfc040030
+#define MCFPM_PPMLR0		0xfc040034
+#define MCFPM_PPMHR1		0xfc040038
+#define MCFPM_LPCR		0xec090007
+
 /*********************************************************************
  *
  * Inter-IC (I2C) Module
diff --git a/arch/m68k/include/asm/m5441xsim.h b/arch/m68k/include/asm/m5441xsim.h
new file mode 100644
index 000000000000..cc798ab9524b
--- /dev/null
+++ b/arch/m68k/include/asm/m5441xsim.h
@@ -0,0 +1,276 @@
+/*
+ *	m5441xsim.h -- Coldfire 5441x register definitions
+ *
+ *	(C) Copyright 2012, Steven King <sfking@fdwdc.com>
+*/
+
+#ifndef m5441xsim_h
+#define m5441xsim_h
+
+#define CPU_NAME		"COLDFIRE(m5441x)"
+#define CPU_INSTR_PER_JIFFY	2
+#define MCF_BUSCLK		(MCF_CLK / 2)
+
+#include <asm/m54xxacr.h>
+
+/*
+ *  Reset Controller Module.
+ */
+
+#define	MCF_RCR			0xec090000
+#define	MCF_RSR			0xec090001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
+/*
+ *  Interrupt Controller Modules.
+ */
+/* the 5441x have 3 interrupt controllers, each control 64 interrupts */
+#define MCFINT_VECBASE		64
+#define MCFINT0_VECBASE		MCFINT_VECBASE
+#define MCFINT1_VECBASE		(MCFINT0_VECBASE + 64)
+#define MCFINT2_VECBASE		(MCFINT1_VECBASE + 64)
+
+/* interrupt controller 0 */
+#define MCFINTC0_SIMR		0xfc04801c
+#define MCFINTC0_CIMR		0xfc04801d
+#define	MCFINTC0_ICR0		0xfc048040
+/* interrupt controller 1 */
+#define MCFINTC1_SIMR		0xfc04c01c
+#define MCFINTC1_CIMR		0xfc04c01d
+#define	MCFINTC1_ICR0		0xfc04c040
+/* interrupt controller 2 */
+#define MCFINTC2_SIMR		0xfc05001c
+#define MCFINTC2_CIMR		0xfc05001d
+#define	MCFINTC2_ICR0		0xfc050040
+
+/* on interrupt controller 0 */
+#define MCFINT0_EPORT0		1
+#define MCFINT0_UART0		26
+#define MCFINT0_UART1		27
+#define MCFINT0_UART2		28
+#define MCFINT0_UART3		29
+#define MCFINT0_I2C0		30
+#define MCFINT0_DSPI0		31
+
+#define MCFINT0_TIMER0		32
+#define MCFINT0_TIMER1		33
+#define MCFINT0_TIMER2		34
+#define MCFINT0_TIMER3		35
+
+#define MCFINT0_FECRX0		36
+#define MCFINT0_FECTX0		40
+#define MCFINT0_FECENTC0	42
+
+#define MCFINT0_FECRX1		49
+#define MCFINT0_FECTX1		53
+#define MCFINT0_FECENTC1	55
+
+/* on interrupt controller 1 */
+#define MCFINT1_UART4		48
+#define MCFINT1_UART5		49
+#define MCFINT1_UART6		50
+#define MCFINT1_UART7		51
+#define MCFINT1_UART8		52
+#define MCFINT1_UART9		53
+#define MCFINT1_DSPI1		54
+#define MCFINT1_DSPI2		55
+#define MCFINT1_DSPI3		56
+#define MCFINT1_I2C1		57
+#define MCFINT1_I2C2		58
+#define MCFINT1_I2C3		59
+#define MCFINT1_I2C4		60
+#define MCFINT1_I2C5		61
+
+/* on interrupt controller 2 */
+#define MCFINT2_PIT0		13
+#define MCFINT2_PIT1		14
+#define MCFINT2_PIT2		15
+#define MCFINT2_PIT3		16
+#define MCFINT2_RTC		26
+
+/*
+ *  PIT timer module.
+ */
+#define	MCFPIT_BASE0		0xFC080000	/* Base address of TIMER0 */
+#define	MCFPIT_BASE1		0xFC084000	/* Base address of TIMER1 */
+#define	MCFPIT_BASE2		0xFC088000	/* Base address of TIMER2 */
+#define	MCFPIT_BASE3		0xFC08C000	/* Base address of TIMER3 */
+
+
+#define MCF_IRQ_PIT1		(MCFINT2_VECBASE + MCFINT2_PIT1)
+
+/*
+ * Power Management
+ */
+#define MCFPM_WCR		0xfc040013
+#define MCFPM_PPMSR0		0xfc04002c
+#define MCFPM_PPMCR0		0xfc04002d
+#define MCFPM_PPMSR1		0xfc04002e
+#define MCFPM_PPMCR1		0xfc04002f
+#define MCFPM_PPMHR0		0xfc040030
+#define MCFPM_PPMLR0		0xfc040034
+#define MCFPM_PPMHR1		0xfc040038
+#define MCFPM_PPMLR1		0xfc04003c
+#define MCFPM_LPCR		0xec090007
+/*
+ *  UART module.
+ */
+#define MCFUART_BASE0		0xfc060000	/* Base address of UART0 */
+#define MCFUART_BASE1		0xfc064000	/* Base address of UART1 */
+#define MCFUART_BASE2		0xfc068000	/* Base address of UART2 */
+#define MCFUART_BASE3		0xfc06c000	/* Base address of UART3 */
+#define MCFUART_BASE4		0xec060000	/* Base address of UART4 */
+#define MCFUART_BASE5		0xec064000	/* Base address of UART5 */
+#define MCFUART_BASE6		0xec068000	/* Base address of UART6 */
+#define MCFUART_BASE7		0xec06c000	/* Base address of UART7 */
+#define MCFUART_BASE8		0xec070000	/* Base address of UART8 */
+#define MCFUART_BASE9		0xec074000	/* Base address of UART9 */
+
+#define MCF_IRQ_UART0		(MCFINT0_VECBASE + MCFINT0_UART0)
+#define MCF_IRQ_UART1		(MCFINT0_VECBASE + MCFINT0_UART1)
+#define MCF_IRQ_UART2		(MCFINT0_VECBASE + MCFINT0_UART2)
+#define MCF_IRQ_UART3		(MCFINT0_VECBASE + MCFINT0_UART3)
+#define MCF_IRQ_UART4		(MCFINT1_VECBASE + MCFINT1_UART4)
+#define MCF_IRQ_UART5		(MCFINT1_VECBASE + MCFINT1_UART5)
+#define MCF_IRQ_UART6		(MCFINT1_VECBASE + MCFINT1_UART6)
+#define MCF_IRQ_UART7		(MCFINT1_VECBASE + MCFINT1_UART7)
+#define MCF_IRQ_UART8		(MCFINT1_VECBASE + MCFINT1_UART8)
+#define MCF_IRQ_UART9		(MCFINT1_VECBASE + MCFINT1_UART9)
+/*
+ *  FEC modules.
+ */
+#define MCFFEC_BASE0		0xfc0d4000
+#define MCFFEC_SIZE0		0x800
+#define MCF_IRQ_FECRX0		(MCFINT0_VECBASE + MCFINT0_FECRX0)
+#define MCF_IRQ_FECTX0		(MCFINT0_VECBASE + MCFINT0_FECTX0)
+#define MCF_IRQ_FECENTC0	(MCFINT0_VECBASE + MCFINT0_FECENTC0)
+
+#define MCFFEC_BASE1		0xfc0d8000
+#define MCFFEC_SIZE1		0x800
+#define MCF_IRQ_FECRX1		(MCFINT0_VECBASE + MCFINT0_FECRX1)
+#define MCF_IRQ_FECTX1		(MCFINT0_VECBASE + MCFINT0_FECTX1)
+#define MCF_IRQ_FECENTC1	(MCFINT0_VECBASE + MCFINT0_FECENTC1)
+/*
+ *  I2C modules.
+ */
+#define MCFI2C_BASE0		0xfc058000
+#define MCFI2C_SIZE0		0x20
+#define MCFI2C_BASE1		0xfc038000
+#define MCFI2C_SIZE1		0x20
+#define MCFI2C_BASE2		0xec010000
+#define MCFI2C_SIZE2		0x20
+#define MCFI2C_BASE3		0xec014000
+#define MCFI2C_SIZE3		0x20
+#define MCFI2C_BASE4		0xec018000
+#define MCFI2C_SIZE4		0x20
+#define MCFI2C_BASE5		0xec01c000
+#define MCFI2C_SIZE5		0x20
+
+#define MCF_IRQ_I2C0		(MCFINT0_VECBASE + MCFINT0_I2C0)
+#define MCF_IRQ_I2C1		(MCFINT1_VECBASE + MCFINT1_I2C1)
+#define MCF_IRQ_I2C2		(MCFINT1_VECBASE + MCFINT1_I2C2)
+#define MCF_IRQ_I2C3		(MCFINT1_VECBASE + MCFINT1_I2C3)
+#define MCF_IRQ_I2C4		(MCFINT1_VECBASE + MCFINT1_I2C4)
+#define MCF_IRQ_I2C5		(MCFINT1_VECBASE + MCFINT1_I2C5)
+/*
+ *  EPORT Module.
+ */
+#define MCFEPORT_EPPAR		0xfc090000
+#define MCFEPORT_EPIER		0xfc090003
+#define MCFEPORT_EPFR		0xfc090006
+/*
+ *  RTC Module.
+ */
+#define MCFRTC_BASE		0xfc0a8000
+#define MCFRTC_SIZE		(0xfc0a8840 - 0xfc0a8000)
+#define MCF_IRQ_RTC		(MCFINT2_VECBASE + MCFINT2_RTC)
+
+/*
+ *  GPIO Module.
+ */
+#define MCFGPIO_PODR_A		0xec094000
+#define MCFGPIO_PODR_B		0xec094001
+#define MCFGPIO_PODR_C		0xec094002
+#define MCFGPIO_PODR_D		0xec094003
+#define MCFGPIO_PODR_E		0xec094004
+#define MCFGPIO_PODR_F		0xec094005
+#define MCFGPIO_PODR_G		0xec094006
+#define MCFGPIO_PODR_H		0xec094007
+#define MCFGPIO_PODR_I		0xec094008
+#define MCFGPIO_PODR_J		0xec094009
+#define MCFGPIO_PODR_K		0xec09400a
+
+#define MCFGPIO_PDDR_A		0xec09400c
+#define MCFGPIO_PDDR_B		0xec09400d
+#define MCFGPIO_PDDR_C		0xec09400e
+#define MCFGPIO_PDDR_D		0xec09400f
+#define MCFGPIO_PDDR_E		0xec094010
+#define MCFGPIO_PDDR_F		0xec094011
+#define MCFGPIO_PDDR_G		0xec094012
+#define MCFGPIO_PDDR_H		0xec094013
+#define MCFGPIO_PDDR_I		0xec094014
+#define MCFGPIO_PDDR_J		0xec094015
+#define MCFGPIO_PDDR_K		0xec094016
+
+#define MCFGPIO_PPDSDR_A	0xec094018
+#define MCFGPIO_PPDSDR_B	0xec094019
+#define MCFGPIO_PPDSDR_C	0xec09401a
+#define MCFGPIO_PPDSDR_D	0xec09401b
+#define MCFGPIO_PPDSDR_E	0xec09401c
+#define MCFGPIO_PPDSDR_F	0xec09401d
+#define MCFGPIO_PPDSDR_G	0xec09401e
+#define MCFGPIO_PPDSDR_H	0xec09401f
+#define MCFGPIO_PPDSDR_I	0xec094020
+#define MCFGPIO_PPDSDR_J	0xec094021
+#define MCFGPIO_PPDSDR_K	0xec094022
+
+#define MCFGPIO_PCLRR_A		0xec094024
+#define MCFGPIO_PCLRR_B		0xec094025
+#define MCFGPIO_PCLRR_C		0xec094026
+#define MCFGPIO_PCLRR_D		0xec094027
+#define MCFGPIO_PCLRR_E		0xec094028
+#define MCFGPIO_PCLRR_F		0xec094029
+#define MCFGPIO_PCLRR_G		0xec09402a
+#define MCFGPIO_PCLRR_H		0xec09402b
+#define MCFGPIO_PCLRR_I		0xec09402c
+#define MCFGPIO_PCLRR_J		0xec09402d
+#define MCFGPIO_PCLRR_K		0xec09402e
+
+#define MCFGPIO_PAR_FBCTL	0xec094048
+#define MCFGPIO_PAR_BE		0xec094049
+#define MCFGPIO_PAR_CS		0xec09404a
+#define MCFGPIO_PAR_CANI2C	0xec09404b
+#define MCFGPIO_PAR_IRQ0H	0xec09404c
+#define MCFGPIO_PAR_IRQ0L	0xec09404d
+#define MCFGPIO_PAR_DSPIOWH	0xec09404e
+#define MCFGPIO_PAR_DSPIOWL	0xec09404f
+#define MCFGPIO_PAR_TIMER	0xec094050
+#define MCFGPIO_PAR_UART2	0xec094051
+#define MCFGPIO_PAR_UART1	0xec094052
+#define MCFGPIO_PAR_UART0	0xec094053
+#define MCFGPIO_PAR_SDHCH	0xec094054
+#define MCFGPIO_PAR_SDHCL	0xec094055
+#define MCFGPIO_PAR_SIMP0H	0xec094056
+#define MCFGPIO_PAR_SIMP0L	0xec094057
+#define MCFGPIO_PAR_SSI0H	0xec094058
+#define MCFGPIO_PAR_SSI0L	0xec094059
+#define MCFGPIO_PAR_DEBUGH1	0xec09405a
+#define MCFGPIO_PAR_DEBUGH0	0xec09405b
+#define MCFGPIO_PAR_DEBUGl	0xec09405c
+#define MCFGPIO_PAR_FEC		0xec09405e
+
+/* generalization for generic gpio support */
+#define MCFGPIO_PODR		MCFGPIO_PODR_A
+#define MCFGPIO_PDDR		MCFGPIO_PDDR_A
+#define MCFGPIO_PPDR		MCFGPIO_PPDSDR_A
+#define MCFGPIO_SETR		MCFGPIO_PPDSDR_A
+#define MCFGPIO_CLRR		MCFGPIO_PCLRR_A
+
+#define MCFGPIO_IRQ_MIN		17
+#define MCFGPIO_IRQ_MAX		24
+#define MCFGPIO_IRQ_VECBASE	(MCFINT_VECBASE - MCFGPIO_IRQ_MIN)
+#define MCFGPIO_PIN_MAX		87
+
+#endif /* m5441xsim_h */
diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
index 47906aafbf67..192bbfeabf70 100644
--- a/arch/m68k/include/asm/m54xxacr.h
+++ b/arch/m68k/include/asm/m54xxacr.h
@@ -55,6 +55,10 @@
 #define ICACHE_SIZE 0x8000	/* instruction - 32k */
 #define DCACHE_SIZE 0x8000	/* data - 32k */
 
+#elif defined(CONFIG_M5441x)
+
+#define ICACHE_SIZE 0x2000	/* instruction - 8k */
+#define DCACHE_SIZE 0x2000	/* data - 8k */
 #endif
 
 #define CACHE_LINE_SIZE 0x0010	/* 16 bytes */
diff --git a/arch/m68k/include/asm/m54xxpci.h b/arch/m68k/include/asm/m54xxpci.h
new file mode 100644
index 000000000000..6fbf54f72f2e
--- /dev/null
+++ b/arch/m68k/include/asm/m54xxpci.h
@@ -0,0 +1,138 @@
+/****************************************************************************/
+
+/*
+ *	m54xxpci.h -- ColdFire 547x and 548x PCI bus support
+ *
+ *	(C) Copyright 2011,  Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/****************************************************************************/
+#ifndef	M54XXPCI_H
+#define	M54XXPCI_H
+/****************************************************************************/
+
+/*
+ *	The core set of PCI support registers are mapped into the MBAR region.
+ */
+#define	PCIIDR		(CONFIG_MBAR + 0xb00)	/* PCI device/vendor ID */
+#define	PCISCR		(CONFIG_MBAR + 0xb04)	/* PCI status/command */
+#define	PCICCRIR	(CONFIG_MBAR + 0xb08)	/* PCI class/revision */
+#define	PCICR1		(CONFIG_MBAR + 0xb0c)	/* PCI configuration 1 */
+#define	PCIBAR0		(CONFIG_MBAR + 0xb10)	/* PCI base address 0 */
+#define	PCIBAR1		(CONFIG_MBAR + 0xb14)	/* PCI base address 1 */
+#define	PCICCPR		(CONFIG_MBAR + 0xb28)	/* PCI cardbus CIS pointer */
+#define	PCISID		(CONFIG_MBAR + 0xb2c)	/* PCI subsystem IDs */
+#define	PCIERBAR	(CONFIG_MBAR + 0xb30)	/* PCI expansion ROM */
+#define	PCICPR		(CONFIG_MBAR + 0xb34)	/* PCI capabilities pointer */
+#define	PCICR2		(CONFIG_MBAR + 0xb3c)	/* PCI configuration 2 */
+
+#define	PCIGSCR		(CONFIG_MBAR + 0xb60)	/* Global status/control */
+#define	PCITBATR0	(CONFIG_MBAR + 0xb64)	/* Target base translation 0 */
+#define	PCITBATR1	(CONFIG_MBAR + 0xb68)	/* Target base translation 1 */
+#define	PCITCR		(CONFIG_MBAR + 0xb6c)	/* Target control */
+#define	PCIIW0BTAR	(CONFIG_MBAR + 0xb70)	/* Initiator window 0 */
+#define	PCIIW1BTAR	(CONFIG_MBAR + 0xb74)	/* Initiator window 1 */
+#define	PCIIW2BTAR	(CONFIG_MBAR + 0xb78)	/* Initiator window 2 */
+#define	PCIIWCR		(CONFIG_MBAR + 0xb80)	/* Initiator window config */
+#define	PCIICR		(CONFIG_MBAR + 0xb84)	/* Initiator control */
+#define	PCIISR		(CONFIG_MBAR + 0xb88)	/* Initiator status */
+#define	PCICAR		(CONFIG_MBAR + 0xbf8)	/* Configuration address */
+
+#define	PCITPSR		(CONFIG_MBAR + 0x8400)	/* TX packet size */
+#define	PCITSAR		(CONFIG_MBAR + 0x8404)	/* TX start address */
+#define	PCITTCR		(CONFIG_MBAR + 0x8408)	/* TX transaction control */
+#define	PCITER		(CONFIG_MBAR + 0x840c)	/* TX enables */
+#define	PCITNAR		(CONFIG_MBAR + 0x8410)	/* TX next address */
+#define	PCITLWR		(CONFIG_MBAR + 0x8414)	/* TX last word */
+#define	PCITDCR		(CONFIG_MBAR + 0x8418)	/* TX done counts */
+#define	PCITSR		(CONFIG_MBAR + 0x841c)	/* TX status */
+#define	PCITFDR		(CONFIG_MBAR + 0x8440)	/* TX FIFO data */
+#define	PCITFSR		(CONFIG_MBAR + 0x8444)	/* TX FIFO status */
+#define	PCITFCR		(CONFIG_MBAR + 0x8448)	/* TX FIFO control */
+#define	PCITFAR		(CONFIG_MBAR + 0x844c)	/* TX FIFO alarm */
+#define	PCITFRPR	(CONFIG_MBAR + 0x8450)	/* TX FIFO read pointer */
+#define	PCITFWPR	(CONFIG_MBAR + 0x8454)	/* TX FIFO write pointer */
+
+#define	PCIRPSR		(CONFIG_MBAR + 0x8480)	/* RX packet size */
+#define	PCIRSAR		(CONFIG_MBAR + 0x8484)	/* RX start address */
+#define	PCIRTCR		(CONFIG_MBAR + 0x8488)	/* RX transaction control */
+#define	PCIRER		(CONFIG_MBAR + 0x848c)	/* RX enables */
+#define	PCIRNAR		(CONFIG_MBAR + 0x8490)	/* RX next address */
+#define	PCIRDCR		(CONFIG_MBAR + 0x8498)	/* RX done counts */
+#define	PCIRSR		(CONFIG_MBAR + 0x849c)	/* RX status */
+#define	PCIRFDR		(CONFIG_MBAR + 0x84c0)	/* RX FIFO data */
+#define	PCIRFSR		(CONFIG_MBAR + 0x84c4)	/* RX FIFO status */
+#define	PCIRFCR		(CONFIG_MBAR + 0x84c8)	/* RX FIFO control */
+#define	PCIRFAR		(CONFIG_MBAR + 0x84cc)	/* RX FIFO alarm */
+#define	PCIRFRPR	(CONFIG_MBAR + 0x84d0)	/* RX FIFO read pointer */
+#define	PCIRFWPR	(CONFIG_MBAR + 0x84d4)	/* RX FIFO write pointer */
+
+#define	PACR		(CONFIG_MBAR + 0xc00)	/* PCI arbiter control */
+#define	PASR		(COFNIG_MBAR + 0xc04)	/* PCI arbiter status */
+
+/*
+ *	Definitions for the Global status and control register.
+ */
+#define	PCIGSCR_PE	0x20000000		/* Parity error detected */
+#define	PCIGSCR_SE	0x10000000		/* System error detected */
+#define	PCIGSCR_XCLKBIN	0x07000000		/* XLB2CLKIN mask */
+#define	PCIGSCR_PEE	0x00002000		/* Parity error intr enable */
+#define	PCIGSCR_SEE	0x00001000		/* System error intr enable */
+#define	PCIGSCR_RESET	0x00000001		/* Reset bit */
+
+/*
+ *	Bit definitions for the PCICAR configuration address register.
+ */
+#define	PCICAR_E	0x80000000		/* Enable config space */
+#define	PCICAR_BUSN	16			/* Move bus bits */
+#define	PCICAR_DEVFNN	8			/* Move devfn bits */
+#define	PCICAR_DWORDN	0			/* Move dword bits */
+
+/*
+ *	The initiator windows hold the memory and IO mapping information.
+ *	This macro creates the register values from the desired addresses.
+ */
+#define	WXBTAR(hostaddr, pciaddr, size)	\
+			(((hostaddr) & 0xff000000) | \
+			((((size) - 1) & 0xff000000) >> 8) | \
+			(((pciaddr) & 0xff000000) >> 16))
+
+#define	PCIIWCR_W0_MEM	0x00000000		/* Window 0 is memory */
+#define	PCIIWCR_W0_IO	0x08000000		/* Window 0 is IO */
+#define	PCIIWCR_W0_MRD	0x00000000		/* Window 0 memory read */
+#define	PCIIWCR_W0_MRDL	0x02000000		/* Window 0 memory read line */
+#define	PCIIWCR_W0_MRDM	0x04000000		/* Window 0 memory read mult */
+#define	PCIIWCR_W0_E	0x01000000		/* Window 0 enable */
+
+#define	PCIIWCR_W1_MEM	0x00000000		/* Window 0 is memory */
+#define	PCIIWCR_W1_IO	0x00080000		/* Window 0 is IO */
+#define	PCIIWCR_W1_MRD	0x00000000		/* Window 0 memory read */
+#define	PCIIWCR_W1_MRDL	0x00020000		/* Window 0 memory read line */
+#define	PCIIWCR_W1_MRDM	0x00040000		/* Window 0 memory read mult */
+#define	PCIIWCR_W1_E	0x00010000		/* Window 0 enable */
+
+/*
+ *	Bit definitions for the PCIBATR registers.
+ */
+#define	PCITBATR0_E	0x00000001		/* Enable window 0 */
+#define	PCITBATR1_E	0x00000001		/* Enable window 1 */
+
+/*
+ *	PCI arbiter support definitions and macros.
+ */
+#define	PACR_INTMPRI	0x00000001
+#define	PACR_EXTMPRI(x)	(((x) & 0x1f) << 1)
+#define	PACR_INTMINTE	0x00010000
+#define	PACR_EXTMINTE(x) (((x) & 0x1f) << 17)
+#define	PACR_PKMD	0x40000000
+#define	PACR_DS		0x80000000
+
+#define	PCICR1_CL(x)	((x) & 0xf)		/* Cacheline size field */
+#define	PCICR1_LT(x)	(((x) & 0xff) << 8)	/* Latency timer field */
+
+/****************************************************************************/
+#endif	/* M54XXPCI_H */
diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h
index ae56b8848a9d..d3c5e0dbdadf 100644
--- a/arch/m68k/include/asm/m54xxsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -81,4 +81,7 @@
 #define MCF_PAR_PSC_RTS_RTS	(0x30)
 #define MCF_PAR_PSC_CANRX	(0x40)
 
+#define MCF_PAR_PCIBG		(CONFIG_MBAR + 0xa48)	/* PCI bus grant */
+#define MCF_PAR_PCIBR		(CONFIG_MBAR + 0xa4a)	/* PCI */
+
 #endif	/* m54xxsim_h */
diff --git a/arch/m68k/include/asm/mcfclk.h b/arch/m68k/include/asm/mcfclk.h
new file mode 100644
index 000000000000..b676a02bb392
--- /dev/null
+++ b/arch/m68k/include/asm/mcfclk.h
@@ -0,0 +1,43 @@
+/*
+ * mcfclk.h -- coldfire specific clock structure
+ */
+
+
+#ifndef mcfclk_h
+#define mcfclk_h
+
+struct clk;
+
+#ifdef MCFPM_PPMCR0
+struct clk_ops {
+	void (*enable)(struct clk *);
+	void (*disable)(struct clk *);
+};
+
+struct clk {
+	const char *name;
+	struct clk_ops *clk_ops;
+	unsigned long rate;
+	unsigned long enabled;
+	u8 slot;
+};
+
+extern struct clk *mcf_clks[];
+extern struct clk_ops clk_ops0;
+#ifdef MCFPM_PPMCR1
+extern struct clk_ops clk_ops1;
+#endif /* MCFPM_PPMCR1 */
+
+#define DEFINE_CLK(clk_bank, clk_name, clk_slot, clk_rate) \
+static struct clk __clk_##clk_bank##_##clk_slot = { \
+	.name = clk_name, \
+	.clk_ops = &clk_ops##clk_bank, \
+	.rate = clk_rate, \
+	.slot = clk_slot, \
+}
+
+void __clk_init_enabled(struct clk *);
+void __clk_init_disabled(struct clk *);
+#endif /* MCFPM_PPMCR0 */
+
+#endif /* mcfclk_h */
diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h
index fe468eaa51e0..fa1059f50dfc 100644
--- a/arch/m68k/include/asm/mcfgpio.h
+++ b/arch/m68k/include/asm/mcfgpio.h
@@ -16,82 +16,289 @@
 #ifndef mcfgpio_h
 #define mcfgpio_h
 
-#include <linux/io.h>
+#ifdef CONFIG_GPIOLIB
 #include <asm-generic/gpio.h>
+#else
+
+int __mcfgpio_get_value(unsigned gpio);
+void __mcfgpio_set_value(unsigned gpio, int value);
+int __mcfgpio_direction_input(unsigned gpio);
+int __mcfgpio_direction_output(unsigned gpio, int value);
+int __mcfgpio_request(unsigned gpio);
+void __mcfgpio_free(unsigned gpio);
+
+/* our alternate 'gpiolib' functions */
+static inline int __gpio_get_value(unsigned gpio)
+{
+	if (gpio < MCFGPIO_PIN_MAX)
+		return __mcfgpio_get_value(gpio);
+	else
+		return -EINVAL;
+}
+
+static inline void __gpio_set_value(unsigned gpio, int value)
+{
+	if (gpio < MCFGPIO_PIN_MAX)
+		__mcfgpio_set_value(gpio, value);
+}
+
+static inline int __gpio_cansleep(unsigned gpio)
+{
+	if (gpio < MCFGPIO_PIN_MAX)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static inline int __gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	if (gpio < MCFGPIO_PIN_MAX)
+		return __mcfgpio_direction_input(gpio);
+	else
+		return -EINVAL;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	if (gpio < MCFGPIO_PIN_MAX)
+		return __mcfgpio_direction_output(gpio, value);
+	else
+		return -EINVAL;
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio < MCFGPIO_PIN_MAX)
+		return __mcfgpio_request(gpio);
+	else
+		return -EINVAL;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	if (gpio < MCFGPIO_PIN_MAX)
+		__mcfgpio_free(gpio);
+}
+
+#endif /* CONFIG_GPIOLIB */
 
-struct mcf_gpio_chip {
-	struct gpio_chip gpio_chip;
-	void __iomem *pddr;
-	void __iomem *podr;
-	void __iomem *ppdr;
-	void __iomem *setr;
-	void __iomem *clrr;
-	const u8 *gpio_to_pinmux;
-};
-
-extern struct mcf_gpio_chip mcf_gpio_chips[];
-extern unsigned int mcf_gpio_chips_size;
-
-int mcf_gpio_direction_input(struct gpio_chip *, unsigned);
-int mcf_gpio_get_value(struct gpio_chip *, unsigned);
-int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int);
-void mcf_gpio_set_value(struct gpio_chip *, unsigned, int);
-void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
-int mcf_gpio_request(struct gpio_chip *, unsigned);
-void mcf_gpio_free(struct gpio_chip *, unsigned);
 
 /*
- *	Define macros to ease the pain of setting up the GPIO tables. There
- *	are two cases we need to deal with here, they cover all currently
- *	available ColdFire GPIO hardware. There are of course minor differences
- *	in the layout and number of bits in each ColdFire part, but the macros
- *	take all that in.
+ * The Freescale Coldfire family is quite varied in how they implement GPIO.
+ * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
+ * only one port, others have multiple ports; some have a single data latch
+ * for both input and output, others have a separate pin data register to read
+ * input; some require a read-modify-write access to change an output, others
+ * have set and clear registers for some of the outputs; Some have all the
+ * GPIOs in a single control area, others have some GPIOs implemented in
+ * different modules.
  *
- *	Firstly is the conventional GPIO registers where we toggle individual
- *	bits in a register, preserving the other bits in the register. For
- *	lack of a better term I have called this the slow method.
+ * This implementation attempts accommodate the differences while presenting
+ * a generic interface that will optimize to as few instructions as possible.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+    defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M532x) || defined(CONFIG_M54xx) || \
+    defined(CONFIG_M5441x)
+
+/* These parts have GPIO organized by 8 bit ports */
+
+#define MCFGPIO_PORTTYPE		u8
+#define MCFGPIO_PORTSIZE		8
+#define mcfgpio_read(port)		__raw_readb(port)
+#define mcfgpio_write(data, port)	__raw_writeb(data, port)
+
+#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
+
+/* These parts have GPIO organized by 16 bit ports */
+
+#define MCFGPIO_PORTTYPE		u16
+#define MCFGPIO_PORTSIZE		16
+#define mcfgpio_read(port)		__raw_readw(port)
+#define mcfgpio_write(data, port)	__raw_writew(data, port)
+
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
+
+/* These parts have GPIO organized by 32 bit ports */
+
+#define MCFGPIO_PORTTYPE		u32
+#define MCFGPIO_PORTSIZE		32
+#define mcfgpio_read(port)		__raw_readl(port)
+#define mcfgpio_write(data, port)	__raw_writel(data, port)
+
+#endif
+
+#define mcfgpio_bit(gpio)		(1 << ((gpio) %  MCFGPIO_PORTSIZE))
+#define mcfgpio_port(gpio)		((gpio) / MCFGPIO_PORTSIZE)
+
+#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+    defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M532x) || defined(CONFIG_M5441x)
+/*
+ * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
+ * read-modify-write to change an output and a GPIO module which has separate
+ * set/clr registers to directly change outputs with a single write access.
+ */
+#if defined(CONFIG_M528x)
+/*
+ * The 528x also has GPIOs in other modules (GPT, QADC) which use
+ * read-modify-write as well as those controlled by the EPORT and GPIO modules.
  */
-#define	MCFGPS(mlabel, mbase, mngpio, mpddr, mpodr, mppdr)		    \
-	{								    \
-		.gpio_chip			= {			    \
-			.label			= #mlabel,		    \
-			.request		= mcf_gpio_request,	    \
-			.free			= mcf_gpio_free,	    \
-			.direction_input	= mcf_gpio_direction_input, \
-			.direction_output	= mcf_gpio_direction_output,\
-			.get			= mcf_gpio_get_value,	    \
-			.set			= mcf_gpio_set_value,       \
-			.base			= mbase,		    \
-			.ngpio			= mngpio,		    \
-		},							    \
-		.pddr		= (void __iomem *) mpddr,		    \
-		.podr		= (void __iomem *) mpodr,		    \
-		.ppdr		= (void __iomem *) mppdr,		    \
-	}
+#define MCFGPIO_SCR_START		40
+#elif defined(CONFIGM5441x)
+/* The m5441x EPORT doesn't have its own GPIO port, uses PORT C */
+#define MCFGPIO_SCR_START		0
+#else
+#define MCFGPIO_SCR_START		8
+#endif
 
+#define MCFGPIO_SETR_PORT(gpio)		(MCFGPIO_SETR + \
+					mcfgpio_port(gpio - MCFGPIO_SCR_START))
+
+#define MCFGPIO_CLRR_PORT(gpio)		(MCFGPIO_CLRR + \
+					mcfgpio_port(gpio - MCFGPIO_SCR_START))
+#else
+
+#define MCFGPIO_SCR_START		MCFGPIO_PIN_MAX
+/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
+#define MCFGPIO_SETR_PORT(gpio)		0
+#define MCFGPIO_CLRR_PORT(gpio)		0
+
+#endif
 /*
- *	Secondly is the faster case, where we have set and clear registers
- *	that allow us to set or clear a bit with a single write, not having
- *	to worry about preserving other bits.
+ * Coldfire specific helper functions
  */
-#define	MCFGPF(mlabel, mbase, mngpio)					    \
-	{								    \
-		.gpio_chip			= {			    \
-			.label			= #mlabel,		    \
-			.request		= mcf_gpio_request,	    \
-			.free			= mcf_gpio_free,	    \
-			.direction_input	= mcf_gpio_direction_input, \
-			.direction_output	= mcf_gpio_direction_output,\
-			.get			= mcf_gpio_get_value,	    \
-			.set			= mcf_gpio_set_value_fast,  \
-			.base			= mbase,		    \
-			.ngpio			= mngpio,		    \
-		},							    \
-		.pddr		= (void __iomem *) MCFGPIO_PDDR_##mlabel,   \
-		.podr		= (void __iomem *) MCFGPIO_PODR_##mlabel,   \
-		.ppdr		= (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \
-		.setr		= (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \
-		.clrr		= (void __iomem *) MCFGPIO_PCLRR_##mlabel,  \
-	}
 
+/* return the port pin data register for a gpio */
+static inline u32 __mcfgpio_ppdr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M5307) || defined(CONFIG_M5407)
+	return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+	if (gpio < 16)
+		return MCFSIM_PADAT;
+	else if (gpio < 32)
+		return MCFSIM_PBDAT;
+	else
+		return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
+	if (gpio < 32)
+		return MCFSIM2_GPIOREAD;
+	else
+		return MCFSIM2_GPIO1READ;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+      defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+      defined(CONFIG_M532x) || defined(CONFIG_M5441x)
+#if !defined(CONFIG_M5441x)
+	if (gpio < 8)
+		return MCFEPORT_EPPDR;
+#if defined(CONFIG_M528x)
+	else if (gpio < 16)
+		return MCFGPTA_GPTPORT;
+	else if (gpio < 24)
+		return MCFGPTB_GPTPORT;
+	else if (gpio < 32)
+		return MCFQADC_PORTQA;
+	else if (gpio < 40)
+		return MCFQADC_PORTQB;
+#endif /* defined(CONFIG_M528x) */
+	else
+#endif /* !defined(CONFIG_M5441x) */
+		return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+	return 0;
 #endif
+}
+
+/* return the port output data register for a gpio */
+static inline u32 __mcfgpio_podr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M5307) || defined(CONFIG_M5407)
+	return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+	if (gpio < 16)
+		return MCFSIM_PADAT;
+	else if (gpio < 32)
+		return MCFSIM_PBDAT;
+	else
+		return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
+	if (gpio < 32)
+		return MCFSIM2_GPIOWRITE;
+	else
+		return MCFSIM2_GPIO1WRITE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+      defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+      defined(CONFIG_M532x) || defined(CONFIG_M5441x)
+#if !defined(CONFIG_M5441x)
+	if (gpio < 8)
+		return MCFEPORT_EPDR;
+#if defined(CONFIG_M528x)
+	else if (gpio < 16)
+		return MCFGPTA_GPTPORT;
+	else if (gpio < 24)
+		return MCFGPTB_GPTPORT;
+	else if (gpio < 32)
+		return MCFQADC_PORTQA;
+	else if (gpio < 40)
+		return MCFQADC_PORTQB;
+#endif /* defined(CONFIG_M528x) */
+	else
+#endif /* !defined(CONFIG_M5441x) */
+		return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+	return 0;
+#endif
+}
+
+/* return the port direction data register for a gpio */
+static inline u32 __mcfgpio_pddr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M5307) || defined(CONFIG_M5407)
+	return MCFSIM_PADDR;
+#elif defined(CONFIG_M5272)
+	if (gpio < 16)
+		return MCFSIM_PADDR;
+	else if (gpio < 32)
+		return MCFSIM_PBDDR;
+	else
+		return MCFSIM_PCDDR;
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
+	if (gpio < 32)
+		return MCFSIM2_GPIOENABLE;
+	else
+		return MCFSIM2_GPIO1ENABLE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+      defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+      defined(CONFIG_M532x) || defined(CONFIG_M5441x)
+#if !defined(CONFIG_M5441x)
+	if (gpio < 8)
+		return MCFEPORT_EPDDR;
+#if defined(CONFIG_M528x)
+	else if (gpio < 16)
+		return MCFGPTA_GPTDDR;
+	else if (gpio < 24)
+		return MCFGPTB_GPTDDR;
+	else if (gpio < 32)
+		return MCFQADC_DDRQA;
+	else if (gpio < 40)
+		return MCFQADC_DDRQB;
+#endif /* defined(CONFIG_M528x) */
+	else
+#endif /* !defined(CONFIG_M5441x) */
+		return MCFGPIO_PDDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+	return 0;
+#endif
+}
+
+#endif /* mcfgpio_h */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index ebd0304054ad..7a83e619e73b 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -27,6 +27,9 @@
 #elif defined(CONFIG_M5249)
 #include <asm/m5249sim.h>
 #include <asm/mcfintc.h>
+#elif defined(CONFIG_M525x)
+#include <asm/m525xsim.h>
+#include <asm/mcfintc.h>
 #elif defined(CONFIG_M527x)
 #include <asm/m527xsim.h>
 #elif defined(CONFIG_M5272)
@@ -43,6 +46,8 @@
 #include <asm/mcfintc.h>
 #elif defined(CONFIG_M54xx)
 #include <asm/m54xxsim.h>
+#elif defined(CONFIG_M5441x)
+#include <asm/m5441xsim.h>
 #endif
 
 /****************************************************************************/
diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
index 351c27237874..da2fa43c2e45 100644
--- a/arch/m68k/include/asm/mcftimer.h
+++ b/arch/m68k/include/asm/mcftimer.h
@@ -19,7 +19,7 @@
 #define	MCFTIMER_TRR		0x04		/* Timer Reference (r/w) */
 #define	MCFTIMER_TCR		0x08		/* Timer Capture reg (r/w) */
 #define	MCFTIMER_TCN		0x0C		/* Timer Counter reg (r/w) */
-#if defined(CONFIG_M532x)
+#if defined(CONFIG_M532x) || defined(CONFIG_M5441x)
 #define	MCFTIMER_TER		0x03		/* Timer Event reg (r/w) */
 #else
 #define	MCFTIMER_TER		0x11		/* Timer Event reg (r/w) */
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index 2d3bc774b3c5..b40c20f66647 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -43,8 +43,8 @@ struct mcf_platform_uart {
 #define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
 #endif
 #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-        defined(CONFIG_M5249) || defined(CONFIG_M5307) || \
-        defined(CONFIG_M5407)
+	defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
+	defined(CONFIG_M5307) || defined(CONFIG_M5407)
 #define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
 #endif
 #define	MCFUART_UIPR		0x34		/* Input Port (r) */
diff --git a/arch/m68k/include/asm/pci.h b/arch/m68k/include/asm/pci.h
index 4ad0aea48ab4..848c3dfaad50 100644
--- a/arch/m68k/include/asm/pci.h
+++ b/arch/m68k/include/asm/pci.h
@@ -2,6 +2,7 @@
 #define _ASM_M68K_PCI_H
 
 #include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
 
 /* The PCI address space does equal the physical memory
  * address space.  The networking and block device layers use
@@ -9,4 +10,9 @@
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
+#define	pcibios_assign_all_busses()	1
+
+#define	PCIBIOS_MIN_IO		0x00000100
+#define	PCIBIOS_MIN_MEM		0x02000000
+
 #endif /* _ASM_M68K_PCI_H */
diff --git a/arch/m68k/include/asm/pinmux.h b/arch/m68k/include/asm/pinmux.h
deleted file mode 100644
index 119ee686dbd1..000000000000
--- a/arch/m68k/include/asm/pinmux.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Coldfire generic GPIO pinmux support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef pinmux_h
-#define pinmux_h
-
-#define MCFPINMUX_NONE		-1
-
-extern int mcf_pinmux_request(unsigned, unsigned);
-extern void mcf_pinmux_release(unsigned, unsigned);
-
-static inline int mcf_pinmux_is_valid(unsigned pinmux)
-{
-	return pinmux != MCFPINMUX_NONE;
-}
-
-#endif
-
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 5c7070e21eb7..068ad49210d6 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -18,6 +18,7 @@ obj-y	+= setup.o signal.o sys_m68k.o syscalltable.o time.o traps.o
 
 obj-$(CONFIG_MMU_MOTOROLA) += ints.o vectors.o
 obj-$(CONFIG_MMU_SUN3) += ints.o vectors.o
+obj-$(CONFIG_PCI) += pcibios.o
 
 ifndef CONFIG_MMU_SUN3
 obj-y	+= dma.o
diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index f6daf6e15d2e..e546a5534dd4 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -16,7 +16,7 @@
 
 #include <asm/pgalloc.h>
 
-#ifdef CONFIG_MMU
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			 dma_addr_t *handle, gfp_t flag)
@@ -96,7 +96,7 @@ void dma_free_coherent(struct device *dev, size_t size,
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
-#endif /* CONFIG_MMU */
+#endif /* CONFIG_MMU && !CONFIG_COLDFIRE */
 
 EXPORT_SYMBOL(dma_alloc_coherent);
 EXPORT_SYMBOL(dma_free_coherent);
@@ -105,6 +105,7 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
 				size_t size, enum dma_data_direction dir)
 {
 	switch (dir) {
+	case DMA_BIDIRECTIONAL:
 	case DMA_TO_DEVICE:
 		cache_push(handle, size);
 		break;
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index b8daf64e347d..165ee9f9d5c9 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -1,5 +1,451 @@
-#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
-#include "entry_mm.S"
+/* -*- mode: asm -*-
+ *
+ *  linux/arch/m68k/kernel/entry.S
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file README.legal in the main directory of this archive
+ * for more details.
+ *
+ * Linux/m68k support by Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ *
+ */
+
+/*
+ * entry.S  contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ */
+
+/*
+ * 12/03/96 Jes: Currently we only support m68k single-cpu systems, so
+ *               all pointers that used to be 'current' are now entry
+ *               number 0 in the 'current_set' list.
+ *
+ *  6/05/00 RZ:	 addedd writeback completion after return from sighandler
+ *		 for 68040
+ */
+
+#include <linux/linkage.h>
+#include <asm/errno.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/traps.h>
+#include <asm/unistd.h>
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+
+.globl system_call, buserr, trap, resume
+.globl sys_call_table
+.globl sys_fork, sys_clone, sys_vfork
+.globl ret_from_interrupt, bad_interrupt
+.globl auto_irqhandler_fixup
+.globl user_irqvec_fixup
+
+.text
+ENTRY(sys_fork)
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	jbsr	m68k_fork
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(sys_clone)
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	jbsr	m68k_clone
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(sys_vfork)
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	jbsr	m68k_vfork
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(sys_sigreturn)
+	SAVE_SWITCH_STACK
+	jbsr	do_sigreturn
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(sys_rt_sigreturn)
+	SAVE_SWITCH_STACK
+	jbsr	do_rt_sigreturn
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(buserr)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%sp,%sp@-		| stack frame pointer argument
+	jbsr	buserr_c
+	addql	#4,%sp
+	jra	ret_from_exception
+
+ENTRY(trap)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%sp,%sp@-		| stack frame pointer argument
+	jbsr	trap_c
+	addql	#4,%sp
+	jra	ret_from_exception
+
+	| After a fork we jump here directly from resume,
+	| so that %d1 contains the previous task
+	| schedule_tail now used regardless of CONFIG_SMP
+ENTRY(ret_from_fork)
+	movel	%d1,%sp@-
+	jsr	schedule_tail
+	addql	#4,%sp
+	jra	ret_from_exception
+
+#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
+
+#ifdef TRAP_DBG_INTERRUPT
+
+.globl dbginterrupt
+ENTRY(dbginterrupt)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%sp,%sp@- 		/* stack frame pointer argument */
+	jsr	dbginterrupt_c
+	addql	#4,%sp
+	jra	ret_from_exception
+#endif
+
+ENTRY(reschedule)
+	/* save top of frame */
+	pea	%sp@
+	jbsr	set_esp0
+	addql	#4,%sp
+	pea	ret_from_exception
+	jmp	schedule
+
+ENTRY(ret_from_user_signal)
+	moveq #__NR_sigreturn,%d0
+	trap #0
+
+ENTRY(ret_from_user_rt_signal)
+	movel #__NR_rt_sigreturn,%d0
+	trap #0
+
 #else
-#include "entry_no.S"
+
+do_trace_entry:
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
+	subql	#4,%sp
+	SAVE_SWITCH_STACK
+	jbsr	syscall_trace
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	movel	%sp@(PT_OFF_ORIG_D0),%d0
+	cmpl	#NR_syscalls,%d0
+	jcs	syscall
+badsys:
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)
+	jra	ret_from_syscall
+
+do_trace_exit:
+	subql	#4,%sp
+	SAVE_SWITCH_STACK
+	jbsr	syscall_trace
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	jra	.Lret_from_exception
+
+ENTRY(ret_from_signal)
+	movel	%curptr@(TASK_STACK),%a1
+	tstb	%a1@(TINFO_FLAGS+2)
+	jge	1f
+	jbsr	syscall_trace
+1:	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+/* on 68040 complete pending writebacks if any */
+#ifdef CONFIG_M68040
+	bfextu	%sp@(PT_OFF_FORMATVEC){#0,#4},%d0
+	subql	#7,%d0				| bus error frame ?
+	jbne	1f
+	movel	%sp,%sp@-
+	jbsr	berr_040cleanup
+	addql	#4,%sp
+1:
+#endif
+	jra	.Lret_from_exception
+
+ENTRY(system_call)
+	SAVE_ALL_SYS
+
+	GET_CURRENT(%d1)
+	movel	%d1,%a1
+
+	| save top of frame
+	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
+
+	| syscall trace?
+	tstb	%a1@(TINFO_FLAGS+2)
+	jmi	do_trace_entry
+	cmpl	#NR_syscalls,%d0
+	jcc	badsys
+syscall:
+	jbsr	@(sys_call_table,%d0:l:4)@(0)
+	movel	%d0,%sp@(PT_OFF_D0)	| save the return value
+ret_from_syscall:
+	|oriw	#0x0700,%sr
+	movel	%curptr@(TASK_STACK),%a1
+	movew	%a1@(TINFO_FLAGS+2),%d0
+	jne	syscall_exit_work
+1:	RESTORE_ALL
+
+syscall_exit_work:
+	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
+	bnes	1b			| if so, skip resched, signals
+	lslw	#1,%d0
+	jcs	do_trace_exit
+	jmi	do_delayed_trace
+	lslw	#8,%d0
+	jne	do_signal_return
+	pea	resume_userspace
+	jra	schedule
+
+
+ENTRY(ret_from_exception)
+.Lret_from_exception:
+	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
+	bnes	1f			| if so, skip resched, signals
+	| only allow interrupts when we are really the last one on the
+	| kernel stack, otherwise stack overflow can occur during
+	| heavy interrupt load
+	andw	#ALLOWINT,%sr
+
+resume_userspace:
+	movel	%curptr@(TASK_STACK),%a1
+	moveb	%a1@(TINFO_FLAGS+3),%d0
+	jne	exit_work
+1:	RESTORE_ALL
+
+exit_work:
+	| save top of frame
+	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
+	lslb	#1,%d0
+	jne	do_signal_return
+	pea	resume_userspace
+	jra	schedule
+
+
+do_signal_return:
+	|andw	#ALLOWINT,%sr
+	subql	#4,%sp			| dummy return address
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	bsrl	do_notify_resume
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	jbra	resume_userspace
+
+do_delayed_trace:
+	bclr	#7,%sp@(PT_OFF_SR)	| clear trace bit in SR
+	pea	1			| send SIGTRAP
+	movel	%curptr,%sp@-
+	pea	LSIGTRAP
+	jbsr	send_sig
+	addql	#8,%sp
+	addql	#4,%sp
+	jbra	resume_userspace
+
+
+/* This is the main interrupt handler for autovector interrupts */
+
+ENTRY(auto_inthandler)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%d0,%a1
+	addqb	#1,%a1@(TINFO_PREEMPT+1)
+					|  put exception # in d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
+	subw	#VEC_SPUR,%d0
+
+	movel	%sp,%sp@-
+	movel	%d0,%sp@-		|  put vector # on stack
+auto_irqhandler_fixup = . + 2
+	jsr	do_IRQ			|  process the IRQ
+	addql	#8,%sp			|  pop parameters off stack
+
+ret_from_interrupt:
+	movel	%curptr@(TASK_STACK),%a1
+	subqb	#1,%a1@(TINFO_PREEMPT+1)
+	jeq	ret_from_last_interrupt
+2:	RESTORE_ALL
+
+	ALIGN
+ret_from_last_interrupt:
+	moveq	#(~ALLOWINT>>8)&0xff,%d0
+	andb	%sp@(PT_OFF_SR),%d0
+	jne	2b
+
+	/* check if we need to do software interrupts */
+	tstl	irq_stat+CPUSTAT_SOFTIRQ_PENDING
+	jeq	.Lret_from_exception
+	pea	ret_from_exception
+	jra	do_softirq
+
+/* Handler for user defined interrupt vectors */
+
+ENTRY(user_inthandler)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%d0,%a1
+	addqb	#1,%a1@(TINFO_PREEMPT+1)
+					|  put exception # in d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
+user_irqvec_fixup = . + 2
+	subw	#VEC_USER,%d0
+
+	movel	%sp,%sp@-
+	movel	%d0,%sp@-		|  put vector # on stack
+	jsr	do_IRQ			|  process the IRQ
+	addql	#8,%sp			|  pop parameters off stack
+
+	movel	%curptr@(TASK_STACK),%a1
+	subqb	#1,%a1@(TINFO_PREEMPT+1)
+	jeq	ret_from_last_interrupt
+	RESTORE_ALL
+
+/* Handler for uninitialized and spurious interrupts */
+
+ENTRY(bad_inthandler)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%d0,%a1
+	addqb	#1,%a1@(TINFO_PREEMPT+1)
+
+	movel	%sp,%sp@-
+	jsr	handle_badint
+	addql	#4,%sp
+
+	movel	%curptr@(TASK_STACK),%a1
+	subqb	#1,%a1@(TINFO_PREEMPT+1)
+	jeq	ret_from_last_interrupt
+	RESTORE_ALL
+
+
+resume:
+	/*
+	 * Beware - when entering resume, prev (the current task) is
+	 * in a0, next (the new task) is in a1,so don't change these
+	 * registers until their contents are no longer needed.
+	 */
+
+	/* save sr */
+	movew	%sr,%a0@(TASK_THREAD+THREAD_SR)
+
+	/* save fs (sfc,%dfc) (may be pointing to kernel memory) */
+	movec	%sfc,%d0
+	movew	%d0,%a0@(TASK_THREAD+THREAD_FS)
+
+	/* save usp */
+	/* it is better to use a movel here instead of a movew 8*) */
+	movec	%usp,%d0
+	movel	%d0,%a0@(TASK_THREAD+THREAD_USP)
+
+	/* save non-scratch registers on stack */
+	SAVE_SWITCH_STACK
+
+	/* save current kernel stack pointer */
+	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP)
+
+	/* save floating point context */
+#ifndef CONFIG_M68KFPU_EMU_ONLY
+#ifdef CONFIG_M68KFPU_EMU
+	tstl	m68k_fputype
+	jeq	3f
+#endif
+	fsave	%a0@(TASK_THREAD+THREAD_FPSTATE)
+
+#if defined(CONFIG_M68060)
+#if !defined(CPU_M68060_ONLY)
+	btst	#3,m68k_cputype+3
+	beqs	1f
+#endif
+	/* The 060 FPU keeps status in bits 15-8 of the first longword */
+	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE+2)
+	jeq	3f
+#if !defined(CPU_M68060_ONLY)
+	jra	2f
+#endif
+#endif /* CONFIG_M68060 */
+#if !defined(CPU_M68060_ONLY)
+1:	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE)
+	jeq	3f
+#endif
+2:	fmovemx	%fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG)
+	fmoveml	%fpcr/%fpsr/%fpiar,%a0@(TASK_THREAD+THREAD_FPCNTL)
+3:
+#endif	/* CONFIG_M68KFPU_EMU_ONLY */
+	/* Return previous task in %d1 */
+	movel	%curptr,%d1
+
+	/* switch to new task (a1 contains new task) */
+	movel	%a1,%curptr
+
+	/* restore floating point context */
+#ifndef CONFIG_M68KFPU_EMU_ONLY
+#ifdef CONFIG_M68KFPU_EMU
+	tstl	m68k_fputype
+	jeq	4f
+#endif
+#if defined(CONFIG_M68060)
+#if !defined(CPU_M68060_ONLY)
+	btst	#3,m68k_cputype+3
+	beqs	1f
+#endif
+	/* The 060 FPU keeps status in bits 15-8 of the first longword */
+	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE+2)
+	jeq	3f
+#if !defined(CPU_M68060_ONLY)
+	jra	2f
+#endif
+#endif /* CONFIG_M68060 */
+#if !defined(CPU_M68060_ONLY)
+1:	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE)
+	jeq	3f
 #endif
+2:	fmovemx	%a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7
+	fmoveml	%a1@(TASK_THREAD+THREAD_FPCNTL),%fpcr/%fpsr/%fpiar
+3:	frestore %a1@(TASK_THREAD+THREAD_FPSTATE)
+4:
+#endif	/* CONFIG_M68KFPU_EMU_ONLY */
+
+	/* restore the kernel stack pointer */
+	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp
+
+	/* restore non-scratch registers */
+	RESTORE_SWITCH_STACK
+
+	/* restore user stack pointer */
+	movel	%a1@(TASK_THREAD+THREAD_USP),%a0
+	movel	%a0,%usp
+
+	/* restore fs (sfc,%dfc) */
+	movew	%a1@(TASK_THREAD+THREAD_FS),%a0
+	movec	%a0,%sfc
+	movec	%a0,%dfc
+
+	/* restore status register */
+	movew	%a1@(TASK_THREAD+THREAD_SR),%sr
+
+	rts
+
+#endif /* CONFIG_MMU && !CONFIG_COLDFIRE */
diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S
deleted file mode 100644
index f29e73ca9dbb..000000000000
--- a/arch/m68k/kernel/entry_mm.S
+++ /dev/null
@@ -1,419 +0,0 @@
-/* -*- mode: asm -*-
- *
- *  linux/arch/m68k/kernel/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- *
- */
-
-/*
- * entry.S  contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- */
-
-/*
- * 12/03/96 Jes: Currently we only support m68k single-cpu systems, so
- *               all pointers that used to be 'current' are now entry
- *               number 0 in the 'current_set' list.
- *
- *  6/05/00 RZ:	 addedd writeback completion after return from sighandler
- *		 for 68040
- */
-
-#include <linux/linkage.h>
-#include <asm/entry.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/traps.h>
-#include <asm/unistd.h>
-
-#include <asm/asm-offsets.h>
-
-.globl system_call, buserr, trap, resume
-.globl sys_call_table
-.globl sys_fork, sys_clone, sys_vfork
-.globl ret_from_interrupt, bad_interrupt
-.globl auto_irqhandler_fixup
-.globl user_irqvec_fixup
-
-.text
-ENTRY(buserr)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	buserr_c
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-ENTRY(trap)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-	| After a fork we jump here directly from resume,
-	| so that %d1 contains the previous task
-	| schedule_tail now used regardless of CONFIG_SMP
-ENTRY(ret_from_fork)
-	movel	%d1,%sp@-
-	jsr	schedule_tail
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-do_trace_entry:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	movel	%sp@(PT_OFF_ORIG_D0),%d0
-	cmpl	#NR_syscalls,%d0
-	jcs	syscall
-badsys:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)
-	jra	ret_from_syscall
-
-do_trace_exit:
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-ENTRY(ret_from_signal)
-	movel	%curptr@(TASK_STACK),%a1
-	tstb	%a1@(TINFO_FLAGS+2)
-	jge	1f
-	jbsr	syscall_trace
-1:	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-/* on 68040 complete pending writebacks if any */
-#ifdef CONFIG_M68040
-	bfextu	%sp@(PT_OFF_FORMATVEC){#0,#4},%d0
-	subql	#7,%d0				| bus error frame ?
-	jbne	1f
-	movel	%sp,%sp@-
-	jbsr	berr_040cleanup
-	addql	#4,%sp
-1:
-#endif
-	jra	.Lret_from_exception
-
-ENTRY(system_call)
-	SAVE_ALL_SYS
-
-	GET_CURRENT(%d1)
-	movel	%d1,%a1
-
-	| save top of frame
-	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-
-	| syscall trace?
-	tstb	%a1@(TINFO_FLAGS+2)
-	jmi	do_trace_entry
-	cmpl	#NR_syscalls,%d0
-	jcc	badsys
-syscall:
-	jbsr	@(sys_call_table,%d0:l:4)@(0)
-	movel	%d0,%sp@(PT_OFF_D0)	| save the return value
-ret_from_syscall:
-	|oriw	#0x0700,%sr
-	movel	%curptr@(TASK_STACK),%a1
-	movew	%a1@(TINFO_FLAGS+2),%d0
-	jne	syscall_exit_work
-1:	RESTORE_ALL
-
-syscall_exit_work:
-	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
-	bnes	1b			| if so, skip resched, signals
-	lslw	#1,%d0
-	jcs	do_trace_exit
-	jmi	do_delayed_trace
-	lslw	#8,%d0
-	jne	do_signal_return
-	pea	resume_userspace
-	jra	schedule
-
-
-ENTRY(ret_from_exception)
-.Lret_from_exception:
-	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
-	bnes	1f			| if so, skip resched, signals
-	| only allow interrupts when we are really the last one on the
-	| kernel stack, otherwise stack overflow can occur during
-	| heavy interrupt load
-	andw	#ALLOWINT,%sr
-
-resume_userspace:
-	movel	%curptr@(TASK_STACK),%a1
-	moveb	%a1@(TINFO_FLAGS+3),%d0
-	jne	exit_work
-1:	RESTORE_ALL
-
-exit_work:
-	| save top of frame
-	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-	lslb	#1,%d0
-	jne	do_signal_return
-	pea	resume_userspace
-	jra	schedule
-
-
-do_signal_return:
-	|andw	#ALLOWINT,%sr
-	subql	#4,%sp			| dummy return address
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	bsrl	do_notify_resume
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jbra	resume_userspace
-
-do_delayed_trace:
-	bclr	#7,%sp@(PT_OFF_SR)	| clear trace bit in SR
-	pea	1			| send SIGTRAP
-	movel	%curptr,%sp@-
-	pea	LSIGTRAP
-	jbsr	send_sig
-	addql	#8,%sp
-	addql	#4,%sp
-	jbra	resume_userspace
-
-
-/* This is the main interrupt handler for autovector interrupts */
-
-ENTRY(auto_inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%d0,%a1
-	addqb	#1,%a1@(TINFO_PREEMPT+1)
-					|  put exception # in d0
-	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
-	subw	#VEC_SPUR,%d0
-
-	movel	%sp,%sp@-
-	movel	%d0,%sp@-		|  put vector # on stack
-auto_irqhandler_fixup = . + 2
-	jsr	do_IRQ			|  process the IRQ
-	addql	#8,%sp			|  pop parameters off stack
-
-ret_from_interrupt:
-	movel	%curptr@(TASK_STACK),%a1
-	subqb	#1,%a1@(TINFO_PREEMPT+1)
-	jeq	ret_from_last_interrupt
-2:	RESTORE_ALL
-
-	ALIGN
-ret_from_last_interrupt:
-	moveq	#(~ALLOWINT>>8)&0xff,%d0
-	andb	%sp@(PT_OFF_SR),%d0
-	jne	2b
-
-	/* check if we need to do software interrupts */
-	tstl	irq_stat+CPUSTAT_SOFTIRQ_PENDING
-	jeq	.Lret_from_exception
-	pea	ret_from_exception
-	jra	do_softirq
-
-/* Handler for user defined interrupt vectors */
-
-ENTRY(user_inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%d0,%a1
-	addqb	#1,%a1@(TINFO_PREEMPT+1)
-					|  put exception # in d0
-	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
-user_irqvec_fixup = . + 2
-	subw	#VEC_USER,%d0
-
-	movel	%sp,%sp@-
-	movel	%d0,%sp@-		|  put vector # on stack
-	jsr	do_IRQ			|  process the IRQ
-	addql	#8,%sp			|  pop parameters off stack
-
-	movel	%curptr@(TASK_STACK),%a1
-	subqb	#1,%a1@(TINFO_PREEMPT+1)
-	jeq	ret_from_last_interrupt
-	RESTORE_ALL
-
-/* Handler for uninitialized and spurious interrupts */
-
-ENTRY(bad_inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%d0,%a1
-	addqb	#1,%a1@(TINFO_PREEMPT+1)
-
-	movel	%sp,%sp@-
-	jsr	handle_badint
-	addql	#4,%sp
-
-	movel	%curptr@(TASK_STACK),%a1
-	subqb	#1,%a1@(TINFO_PREEMPT+1)
-	jeq	ret_from_last_interrupt
-	RESTORE_ALL
-
-
-ENTRY(sys_fork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_fork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_clone)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_clone
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_vfork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_vfork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_rt_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_rt_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-resume:
-	/*
-	 * Beware - when entering resume, prev (the current task) is
-	 * in a0, next (the new task) is in a1,so don't change these
-	 * registers until their contents are no longer needed.
-	 */
-
-	/* save sr */
-	movew	%sr,%a0@(TASK_THREAD+THREAD_SR)
-
-	/* save fs (sfc,%dfc) (may be pointing to kernel memory) */
-	movec	%sfc,%d0
-	movew	%d0,%a0@(TASK_THREAD+THREAD_FS)
-
-	/* save usp */
-	/* it is better to use a movel here instead of a movew 8*) */
-	movec	%usp,%d0
-	movel	%d0,%a0@(TASK_THREAD+THREAD_USP)
-
-	/* save non-scratch registers on stack */
-	SAVE_SWITCH_STACK
-
-	/* save current kernel stack pointer */
-	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP)
-
-	/* save floating point context */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
-#ifdef CONFIG_M68KFPU_EMU
-	tstl	m68k_fputype
-	jeq	3f
-#endif
-	fsave	%a0@(TASK_THREAD+THREAD_FPSTATE)
-
-#if defined(CONFIG_M68060)
-#if !defined(CPU_M68060_ONLY)
-	btst	#3,m68k_cputype+3
-	beqs	1f
-#endif
-	/* The 060 FPU keeps status in bits 15-8 of the first longword */
-	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE+2)
-	jeq	3f
-#if !defined(CPU_M68060_ONLY)
-	jra	2f
-#endif
-#endif /* CONFIG_M68060 */
-#if !defined(CPU_M68060_ONLY)
-1:	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE)
-	jeq	3f
-#endif
-2:	fmovemx	%fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG)
-	fmoveml	%fpcr/%fpsr/%fpiar,%a0@(TASK_THREAD+THREAD_FPCNTL)
-3:
-#endif	/* CONFIG_M68KFPU_EMU_ONLY */
-	/* Return previous task in %d1 */
-	movel	%curptr,%d1
-
-	/* switch to new task (a1 contains new task) */
-	movel	%a1,%curptr
-
-	/* restore floating point context */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
-#ifdef CONFIG_M68KFPU_EMU
-	tstl	m68k_fputype
-	jeq	4f
-#endif
-#if defined(CONFIG_M68060)
-#if !defined(CPU_M68060_ONLY)
-	btst	#3,m68k_cputype+3
-	beqs	1f
-#endif
-	/* The 060 FPU keeps status in bits 15-8 of the first longword */
-	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE+2)
-	jeq	3f
-#if !defined(CPU_M68060_ONLY)
-	jra	2f
-#endif
-#endif /* CONFIG_M68060 */
-#if !defined(CPU_M68060_ONLY)
-1:	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE)
-	jeq	3f
-#endif
-2:	fmovemx	%a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7
-	fmoveml	%a1@(TASK_THREAD+THREAD_FPCNTL),%fpcr/%fpsr/%fpiar
-3:	frestore %a1@(TASK_THREAD+THREAD_FPSTATE)
-4:
-#endif	/* CONFIG_M68KFPU_EMU_ONLY */
-
-	/* restore the kernel stack pointer */
-	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp
-
-	/* restore non-scratch registers */
-	RESTORE_SWITCH_STACK
-
-	/* restore user stack pointer */
-	movel	%a1@(TASK_THREAD+THREAD_USP),%a0
-	movel	%a0,%usp
-
-	/* restore fs (sfc,%dfc) */
-	movew	%a1@(TASK_THREAD+THREAD_FS),%a0
-	movec	%a0,%sfc
-	movec	%a0,%dfc
-
-	/* restore status register */
-	movew	%a1@(TASK_THREAD+THREAD_SR),%sr
-
-	rts
-
diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S
deleted file mode 100644
index d80cba45589f..000000000000
--- a/arch/m68k/kernel/entry_no.S
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/entry.S
- *
- *  Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *                      Kenneth Albanowski <kjahds@kjahds.com>,
- *  Copyright (C) 2000  Lineo Inc. (www.lineo.com) 
- *
- * Based on:
- *
- *  linux/arch/m68k/kernel/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- * ColdFire support by Greg Ungerer (gerg@snapgear.com)
- * 5307 fixes by David W. Miller
- * linux 2.4 support David McCullough <davidm@snapgear.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/asm-offsets.h>
-#include <asm/entry.h>
-#include <asm/unistd.h>
-
-.text
-
-.globl buserr
-.globl trap
-.globl ret_from_exception
-.globl ret_from_signal
-.globl sys_fork
-.globl sys_clone
-.globl sys_vfork
-
-ENTRY(buserr)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@- 		/* stack frame pointer argument */
-	jsr	buserr_c
-	addql	#4,%sp
-	jra	ret_from_exception
-
-ENTRY(trap)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@- 		/* stack frame pointer argument */
-	jsr	trap_c
-	addql	#4,%sp
-	jra	ret_from_exception
-
-#ifdef TRAP_DBG_INTERRUPT
-
-.globl dbginterrupt
-ENTRY(dbginterrupt)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@- 		/* stack frame pointer argument */
-	jsr	dbginterrupt_c
-	addql	#4,%sp
-	jra	ret_from_exception
-#endif
-
-ENTRY(reschedule)
-	/* save top of frame */
-	pea	%sp@
-	jbsr	set_esp0
-	addql	#4,%sp
-	pea	ret_from_exception
-	jmp	schedule
-
-ENTRY(ret_from_fork)
-	movel	%d1,%sp@-
-	jsr	schedule_tail
-	addql	#4,%sp
-	jra	ret_from_exception
-
-ENTRY(sys_fork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_fork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_vfork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_vfork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_clone)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_clone
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_rt_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_rt_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(ret_from_user_signal)
-	moveq #__NR_sigreturn,%d0
-	trap #0
-
-ENTRY(ret_from_user_rt_signal)
-	movel #__NR_rt_sigreturn,%d0
-	trap #0
-
diff --git a/arch/m68k/kernel/pcibios.c b/arch/m68k/kernel/pcibios.c
new file mode 100644
index 000000000000..b2988aa1840b
--- /dev/null
+++ b/arch/m68k/kernel/pcibios.c
@@ -0,0 +1,109 @@
+/*
+ * pci.c -- basic PCI support code
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+/*
+ * From arch/i386/kernel/pci-i386.c:
+ *
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+	resource_size_t size, resource_size_t align)
+{
+	resource_size_t start = res->start;
+
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
+
+	start = (start + align - 1) & ~(align - 1);
+
+	return start;
+}
+
+/*
+ * This is taken from the ARM code for this.
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	struct resource *r;
+	u16 cmd, newcmd;
+	int idx;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	newcmd = cmd;
+
+	for (idx = 0; idx < 6; idx++) {
+		/* Only set up the requested stuff */
+		if (!(mask & (1 << idx)))
+			continue;
+
+		r = dev->resource + idx;
+		if (!r->start && r->end) {
+			pr_err(KERN_ERR "PCI: Device %s not available because of resource collisions\n",
+				pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			newcmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			newcmd |= PCI_COMMAND_MEMORY;
+	}
+
+	/*
+	 * Bridges (eg, cardbus bridges) need to be fully enabled
+	 */
+	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+		newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+
+
+	if (newcmd != cmd) {
+		pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
+			pci_name(dev), cmd, newcmd);
+		pci_write_config_word(dev, PCI_COMMAND, newcmd);
+	}
+	return 0;
+}
+
+void pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
+		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32);
+	}
+}
+
+char __devinit *pcibios_setup(char *str)
+{
+	return str;
+}
+
diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c
index 250b8b786f4f..51bc9d258ede 100644
--- a/arch/m68k/mm/memory.c
+++ b/arch/m68k/mm/memory.c
@@ -203,7 +203,7 @@ static inline void pushcl040(unsigned long paddr)
 void cache_clear (unsigned long paddr, int len)
 {
     if (CPU_IS_COLDFIRE) {
-	flush_cf_bcache(0, DCACHE_MAX_ADDR);
+	clear_cf_bcache(0, DCACHE_MAX_ADDR);
     } else if (CPU_IS_040_OR_060) {
 	int tmp;
 
diff --git a/arch/m68k/platform/coldfire/Makefile b/arch/m68k/platform/coldfire/Makefile
index 76d389d9a84e..02591a109f8c 100644
--- a/arch/m68k/platform/coldfire/Makefile
+++ b/arch/m68k/platform/coldfire/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_M5206e)	+= m5206.o timers.o intc.o reset.o
 obj-$(CONFIG_M520x)	+= m520x.o pit.o intc-simr.o reset.o
 obj-$(CONFIG_M523x)	+= m523x.o pit.o dma_timer.o intc-2.o reset.o
 obj-$(CONFIG_M5249)	+= m5249.o timers.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x)	+= m525x.o timers.o intc.o intc-525x.o reset.o
 obj-$(CONFIG_M527x)	+= m527x.o pit.o intc-2.o reset.o
 obj-$(CONFIG_M5272)	+= m5272.o intc-5272.o timers.o
 obj-$(CONFIG_M528x)	+= m528x.o pit.o intc-2.o reset.o
@@ -27,10 +28,14 @@ obj-$(CONFIG_M5307)	+= m5307.o timers.o intc.o reset.o
 obj-$(CONFIG_M532x)	+= m532x.o timers.o intc-simr.o reset.o
 obj-$(CONFIG_M5407)	+= m5407.o timers.o intc.o reset.o
 obj-$(CONFIG_M54xx)	+= m54xx.o sltimers.o intc-2.o
+obj-$(CONFIG_M5441x)	+= m5441x.o pit.o intc-simr.o reset.o
 
 obj-$(CONFIG_NETtel)	+= nettel.o
 obj-$(CONFIG_CLEOPATRA)	+= nettel.o
 obj-$(CONFIG_FIREBEE)	+= firebee.o
+obj-$(CONFIG_MCF8390)	+= mcf8390.o
 
-obj-y			+= pinmux.o gpio.o
+obj-$(CONFIG_PCI)	+= pci.o
+
+obj-y			+= gpio.o
 extra-y := head.o
diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c
index 44da406897e5..75f9ee967ea7 100644
--- a/arch/m68k/platform/coldfire/clk.c
+++ b/arch/m68k/platform/coldfire/clk.c
@@ -10,11 +10,17 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
 #include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
 #include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
 
 /***************************************************************************/
-
+#ifndef MCFPM_PPMCR0
 struct clk *clk_get(struct device *dev, const char *id)
 {
 	return NULL;
@@ -42,11 +48,107 @@ unsigned long clk_get_rate(struct clk *clk)
 	return MCF_CLK;
 }
 EXPORT_SYMBOL(clk_get_rate);
+#else
+static DEFINE_SPINLOCK(clk_lock);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	const char *clk_name = dev ? dev_name(dev) : id ? id : NULL;
+	struct clk *clk;
+	unsigned i;
+
+	for (i = 0; (clk = mcf_clks[i]) != NULL; ++i)
+		if (!strcmp(clk->name, clk_name))
+			return clk;
+	pr_warn("clk_get: didn't find clock %s\n", clk_name);
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&clk_lock, flags);
+	if ((clk->enabled++ == 0) && clk->clk_ops)
+		clk->clk_ops->enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&clk_lock, flags);
+	if ((--clk->enabled == 0) && clk->clk_ops)
+		clk->clk_ops->disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void clk_put(struct clk *clk)
+{
+	if (clk->enabled != 0)
+		pr_warn("clk_put %s still enabled\n", clk->name);
+}
+EXPORT_SYMBOL(clk_put);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/***************************************************************************/
+
+void __clk_init_enabled(struct clk *clk)
+{
+	clk->enabled = 1;
+	clk->clk_ops->enable(clk);
+}
+
+void __clk_init_disabled(struct clk *clk)
+{
+	clk->enabled = 0;
+	clk->clk_ops->disable(clk);
+}
+
+static void __clk_enable0(struct clk *clk)
+{
+	__raw_writeb(clk->slot, MCFPM_PPMCR0);
+}
+
+static void __clk_disable0(struct clk *clk)
+{
+	__raw_writeb(clk->slot, MCFPM_PPMSR0);
+}
+
+struct clk_ops clk_ops0 = {
+	.enable		= __clk_enable0,
+	.disable	= __clk_disable0,
+};
+
+#ifdef MCFPM_PPMCR1
+static void __clk_enable1(struct clk *clk)
+{
+	__raw_writeb(clk->slot, MCFPM_PPMCR1);
+}
+
+static void __clk_disable1(struct clk *clk)
+{
+	__raw_writeb(clk->slot, MCFPM_PPMSR1);
+}
+
+struct clk_ops clk_ops1 = {
+	.enable		= __clk_enable1,
+	.disable	= __clk_disable1,
+};
+#endif /* MCFPM_PPMCR1 */
+#endif /* MCFPM_PPMCR0 */
 
 struct clk *devm_clk_get(struct device *dev, const char *id)
 {
 	return NULL;
 }
 EXPORT_SYMBOL(devm_clk_get);
-
-/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c
index 3aa77ddea89d..81f0fb5e51cf 100644
--- a/arch/m68k/platform/coldfire/device.c
+++ b/arch/m68k/platform/coldfire/device.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/spi/spi.h>
 #include <linux/gpio.h>
+#include <linux/fec.h>
 #include <asm/traps.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
@@ -20,7 +21,7 @@
 #include <asm/mcfqspi.h>
 
 /*
- *	All current ColdFire parts contain from 2, 3 or 4 UARTS.
+ *	All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
  */
 static struct mcf_platform_uart mcf_uart_platform_data[] = {
 	{
@@ -43,6 +44,42 @@ static struct mcf_platform_uart mcf_uart_platform_data[] = {
 		.irq		= MCF_IRQ_UART3,
 	},
 #endif
+#ifdef MCFUART_BASE4
+	{
+		.mapbase	= MCFUART_BASE4,
+		.irq		= MCF_IRQ_UART4,
+	},
+#endif
+#ifdef MCFUART_BASE5
+	{
+		.mapbase	= MCFUART_BASE5,
+		.irq		= MCF_IRQ_UART5,
+	},
+#endif
+#ifdef MCFUART_BASE6
+	{
+		.mapbase	= MCFUART_BASE6,
+		.irq		= MCF_IRQ_UART6,
+	},
+#endif
+#ifdef MCFUART_BASE7
+	{
+		.mapbase	= MCFUART_BASE7,
+		.irq		= MCF_IRQ_UART7,
+	},
+#endif
+#ifdef MCFUART_BASE8
+	{
+		.mapbase	= MCFUART_BASE8,
+		.irq		= MCF_IRQ_UART8,
+	},
+#endif
+#ifdef MCFUART_BASE9
+	{
+		.mapbase	= MCFUART_BASE9,
+		.irq		= MCF_IRQ_UART9,
+	},
+#endif
 	{ },
 };
 
@@ -53,6 +90,18 @@ static struct platform_device mcf_uart = {
 };
 
 #ifdef CONFIG_FEC
+
+#ifdef CONFIG_M5441x
+#define FEC_NAME	"enet-fec"
+static struct fec_platform_data fec_pdata = {
+	.phy		= PHY_INTERFACE_MODE_RMII,
+};
+#define FEC_PDATA	(&fec_pdata)
+#else
+#define FEC_NAME	"fec"
+#define FEC_PDATA	NULL
+#endif
+
 /*
  *	Some ColdFire cores contain the Fast Ethernet Controller (FEC)
  *	block. It is Freescale's own hardware block. Some ColdFires
@@ -82,10 +131,11 @@ static struct resource mcf_fec0_resources[] = {
 };
 
 static struct platform_device mcf_fec0 = {
-	.name			= "fec",
+	.name			= FEC_NAME,
 	.id			= 0,
 	.num_resources		= ARRAY_SIZE(mcf_fec0_resources),
 	.resource		= mcf_fec0_resources,
+	.dev.platform_data	= FEC_PDATA,
 };
 
 #ifdef MCFFEC_BASE1
@@ -113,10 +163,11 @@ static struct resource mcf_fec1_resources[] = {
 };
 
 static struct platform_device mcf_fec1 = {
-	.name			= "fec",
+	.name			= FEC_NAME,
 	.id			= 1,
 	.num_resources		= ARRAY_SIZE(mcf_fec1_resources),
 	.resource		= mcf_fec1_resources,
+	.dev.platform_data	= FEC_PDATA,
 };
 #endif /* MCFFEC_BASE1 */
 #endif /* CONFIG_FEC */
diff --git a/arch/m68k/platform/coldfire/gpio.c b/arch/m68k/platform/coldfire/gpio.c
index 4c8c42450a4e..9cd2b5c70519 100644
--- a/arch/m68k/platform/coldfire/gpio.c
+++ b/arch/m68k/platform/coldfire/gpio.c
@@ -14,119 +14,161 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <asm/gpio.h>
-#include <asm/pinmux.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
 #include <asm/mcfgpio.h>
 
-#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip, gpio_chip)
+int __mcfgpio_get_value(unsigned gpio)
+{
+	return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_get_value);
+
+void __mcfgpio_set_value(unsigned gpio, int value)
+{
+	if (gpio < MCFGPIO_SCR_START) {
+		unsigned long flags;
+		MCFGPIO_PORTTYPE data;
+
+		local_irq_save(flags);
+		data = mcfgpio_read(__mcfgpio_podr(gpio));
+		if (value)
+			data |= mcfgpio_bit(gpio);
+		else
+			data &= ~mcfgpio_bit(gpio);
+		mcfgpio_write(data, __mcfgpio_podr(gpio));
+		local_irq_restore(flags);
+	} else {
+		if (value)
+			mcfgpio_write(mcfgpio_bit(gpio),
+					MCFGPIO_SETR_PORT(gpio));
+		else
+			mcfgpio_write(~mcfgpio_bit(gpio),
+					MCFGPIO_CLRR_PORT(gpio));
+	}
+}
+EXPORT_SYMBOL(__mcfgpio_set_value);
 
-int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+int __mcfgpio_direction_input(unsigned gpio)
 {
 	unsigned long flags;
 	MCFGPIO_PORTTYPE dir;
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
 
 	local_irq_save(flags);
-	dir = mcfgpio_read(mcf_chip->pddr);
-	dir &= ~mcfgpio_bit(chip->base + offset);
-	mcfgpio_write(dir, mcf_chip->pddr);
+	dir = mcfgpio_read(__mcfgpio_pddr(gpio));
+	dir &= ~mcfgpio_bit(gpio);
+	mcfgpio_write(dir, __mcfgpio_pddr(gpio));
 	local_irq_restore(flags);
 
 	return 0;
 }
+EXPORT_SYMBOL(__mcfgpio_direction_input);
 
-int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-{
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset);
-}
-
-int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-		int value)
+int __mcfgpio_direction_output(unsigned gpio, int value)
 {
 	unsigned long flags;
 	MCFGPIO_PORTTYPE data;
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
 
 	local_irq_save(flags);
-	/* write the value to the output latch */
-	data = mcfgpio_read(mcf_chip->podr);
+	data = mcfgpio_read(__mcfgpio_pddr(gpio));
 	if (value)
-		data |= mcfgpio_bit(chip->base + offset);
+		data |= mcfgpio_bit(gpio);
 	else
-		data &= ~mcfgpio_bit(chip->base + offset);
-	mcfgpio_write(data, mcf_chip->podr);
-
-	/* now set the direction to output */
-	data = mcfgpio_read(mcf_chip->pddr);
-	data |= mcfgpio_bit(chip->base + offset);
-	mcfgpio_write(data, mcf_chip->pddr);
+		data &= mcfgpio_bit(gpio);
+	mcfgpio_write(data, __mcfgpio_pddr(gpio));
+
+	/* now set the data to output */
+	if (gpio < MCFGPIO_SCR_START) {
+		data = mcfgpio_read(__mcfgpio_podr(gpio));
+		if (value)
+			data |= mcfgpio_bit(gpio);
+		else
+			data &= ~mcfgpio_bit(gpio);
+		mcfgpio_write(data, __mcfgpio_podr(gpio));
+	} else {
+		 if (value)
+			mcfgpio_write(mcfgpio_bit(gpio),
+					MCFGPIO_SETR_PORT(gpio));
+		 else
+			 mcfgpio_write(~mcfgpio_bit(gpio),
+					 MCFGPIO_CLRR_PORT(gpio));
+	}
 	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(__mcfgpio_direction_output);
 
+int __mcfgpio_request(unsigned gpio)
+{
 	return 0;
 }
+EXPORT_SYMBOL(__mcfgpio_request);
 
-void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
+void __mcfgpio_free(unsigned gpio)
 {
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+	__mcfgpio_direction_input(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_free);
 
-	unsigned long flags;
-	MCFGPIO_PORTTYPE data;
+#ifdef CONFIG_GPIOLIB
 
-	local_irq_save(flags);
-	data = mcfgpio_read(mcf_chip->podr);
-	if (value)
-		data |= mcfgpio_bit(chip->base + offset);
-	else
-		data &= ~mcfgpio_bit(chip->base + offset);
-	mcfgpio_write(data, mcf_chip->podr);
-	local_irq_restore(flags);
+int mcfgpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return __mcfgpio_direction_input(offset);
 }
 
-void mcf_gpio_set_value_fast(struct gpio_chip *chip, unsigned offset, int value)
+int mcfgpio_get_value(struct gpio_chip *chip, unsigned offset)
 {
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	if (value)
-		mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr);
-	else
-		mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr);
+	return __mcfgpio_get_value(offset);
 }
 
-int mcf_gpio_request(struct gpio_chip *chip, unsigned offset)
+int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	return mcf_chip->gpio_to_pinmux ?
-		mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0;
+	return __mcfgpio_direction_output(offset, value);
 }
 
-void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
+void mcfgpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+	__mcfgpio_set_value(offset, value);
+}
 
-	mcf_gpio_direction_input(chip, offset);
+int mcfgpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return __mcfgpio_request(offset);
+}
 
-	if (mcf_chip->gpio_to_pinmux)
-		mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
+void mcfgpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	__mcfgpio_free(offset);
 }
 
-struct bus_type mcf_gpio_subsys = {
+struct bus_type mcfgpio_subsys = {
 	.name		= "gpio",
 	.dev_name	= "gpio",
 };
 
-static int __init mcf_gpio_sysinit(void)
-{
-	unsigned int i = 0;
+static struct gpio_chip mcfgpio_chip = {
+	.label			= "mcfgpio",
+	.request		= mcfgpio_request,
+	.free			= mcfgpio_free,
+	.direction_input	= mcfgpio_direction_input,
+	.direction_output	= mcfgpio_direction_output,
+	.get			= mcfgpio_get_value,
+	.set			= mcfgpio_set_value,
+	.base			= 0,
+	.ngpio			= MCFGPIO_PIN_MAX,
+};
 
-	while (i < mcf_gpio_chips_size)
-		gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return subsys_system_register(&mcf_gpio_subsys, NULL);
+static int __init mcfgpio_sysinit(void)
+{
+	gpiochip_add(&mcfgpio_chip);
+	return subsys_system_register(&mcfgpio_subsys, NULL);
 }
 
-core_initcall(mcf_gpio_sysinit);
+core_initcall(mcfgpio_sysinit);
+#endif
diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S
index c3db70ed33b3..4e0c9eb3bd1f 100644
--- a/arch/m68k/platform/coldfire/head.S
+++ b/arch/m68k/platform/coldfire/head.S
@@ -31,9 +31,9 @@
 .endm
 
 #elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-      defined(CONFIG_M5249) || defined(CONFIG_M527x) || \
-      defined(CONFIG_M528x) || defined(CONFIG_M5307) || \
-      defined(CONFIG_M5407)
+      defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
+      defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+      defined(CONFIG_M5307) || defined(CONFIG_M5407)
 /*
  *	Not all these devices have exactly the same DRAM controller,
  *	but the DCMR register is virtually identical - give or take
diff --git a/arch/m68k/platform/coldfire/intc-525x.c b/arch/m68k/platform/coldfire/intc-525x.c
new file mode 100644
index 000000000000..b23204d059ac
--- /dev/null
+++ b/arch/m68k/platform/coldfire/intc-525x.c
@@ -0,0 +1,91 @@
+/*
+ * intc2.c  -- support for the 2nd INTC controller of the 525x
+ *
+ * (C) Copyright 2012, Steven King <sfking@fdwdc.com>
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(struct irq_data *d)
+{
+	u32 imr = readl(MCFSIM2_GPIOINTENABLE);
+	u32 type = irqd_get_trigger_type(d);
+	int irq = d->irq - MCF_IRQ_GPIO0;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		imr &= ~(0x001 << irq);
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		imr &= ~(0x100 << irq);
+	writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(struct irq_data *d)
+{
+	u32 imr = readl(MCFSIM2_GPIOINTENABLE);
+	u32 type = irqd_get_trigger_type(d);
+	int irq = d->irq - MCF_IRQ_GPIO0;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		imr |= (0x001 << irq);
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		imr |= (0x100 << irq);
+	writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(struct irq_data *d)
+{
+	u32 imr = 0;
+	u32 type = irqd_get_trigger_type(d);
+	int irq = d->irq - MCF_IRQ_GPIO0;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		imr |= (0x001 << irq);
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		imr |= (0x100 << irq);
+	writel(imr, MCFSIM2_GPIOINTCLEAR);
+}
+
+static int intc2_irq_gpio_set_type(struct irq_data *d, unsigned int f)
+{
+	if (f & ~IRQ_TYPE_EDGE_BOTH)
+		return -EINVAL;
+	return 0;
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+	.name		= "CF-INTC2",
+	.irq_mask	= intc2_irq_gpio_mask,
+	.irq_unmask	= intc2_irq_gpio_unmask,
+	.irq_ack	= intc2_irq_gpio_ack,
+	.irq_set_type	= intc2_irq_gpio_set_type,
+};
+
+static int __init mcf_intc2_init(void)
+{
+	int irq;
+
+	/* set the interrupt base for the second interrupt controller */
+	writel(MCFINTC2_VECBASE, MCFINTC2_INTBASE);
+
+	/* GPIO interrupt sources */
+	for (irq = MCF_IRQ_GPIO0; (irq <= MCF_IRQ_GPIO6); irq++) {
+		irq_set_chip(irq, &intc2_irq_gpio_chip);
+		irq_set_handler(irq, handle_edge_irq);
+	}
+
+	return 0;
+}
+
+arch_initcall(mcf_intc2_init);
diff --git a/arch/m68k/platform/coldfire/intc-simr.c b/arch/m68k/platform/coldfire/intc-simr.c
index 650d52e2927e..7cf2c156f72d 100644
--- a/arch/m68k/platform/coldfire/intc-simr.c
+++ b/arch/m68k/platform/coldfire/intc-simr.c
@@ -59,16 +59,18 @@ static unsigned int inline irq2ebit(unsigned int irq)
 #endif
 
 /*
- *	There maybe one or two interrupt control units, each has 64
- *	interrupts. If there is no second unit then MCFINTC1_* defines
- *	will be 0 (and code for them optimized away).
+ *	There maybe one, two or three interrupt control units, each has 64
+ *	interrupts. If there is no second or third unit then MCFINTC1_* or
+ *	MCFINTC2_* defines will be 0 (and code for them optimized away).
  */
 
 static void intc_irq_mask(struct irq_data *d)
 {
 	unsigned int irq = d->irq - MCFINT_VECBASE;
 
-	if (MCFINTC1_SIMR && (irq > 64))
+	if (MCFINTC2_SIMR && (irq > 128))
+		__raw_writeb(irq - 128, MCFINTC2_SIMR);
+	else if (MCFINTC1_SIMR && (irq > 64))
 		__raw_writeb(irq - 64, MCFINTC1_SIMR);
 	else
 		__raw_writeb(irq, MCFINTC0_SIMR);
@@ -78,7 +80,9 @@ static void intc_irq_unmask(struct irq_data *d)
 {
 	unsigned int irq = d->irq - MCFINT_VECBASE;
 
-	if (MCFINTC1_CIMR && (irq > 64))
+	if (MCFINTC2_CIMR && (irq > 128))
+		__raw_writeb(irq - 128, MCFINTC2_CIMR);
+	else if (MCFINTC1_CIMR && (irq > 64))
 		__raw_writeb(irq - 64, MCFINTC1_CIMR);
 	else
 		__raw_writeb(irq, MCFINTC0_CIMR);
@@ -99,9 +103,11 @@ static unsigned int intc_irq_startup(struct irq_data *d)
 		unsigned int ebit = irq2ebit(irq);
 		u8 v;
 
+#if defined(MCFEPORT_EPDDR)
 		/* Set EPORT line as input */
 		v = __raw_readb(MCFEPORT_EPDDR);
 		__raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
+#endif
 
 		/* Set EPORT line as interrupt source */
 		v = __raw_readb(MCFEPORT_EPIER);
@@ -109,12 +115,13 @@ static unsigned int intc_irq_startup(struct irq_data *d)
 	}
 
 	irq -= MCFINT_VECBASE;
-	if (MCFINTC1_ICR0 && (irq > 64))
+	if (MCFINTC2_ICR0 && (irq > 128))
+		__raw_writeb(5, MCFINTC2_ICR0 + irq - 128);
+	else if (MCFINTC1_ICR0 && (irq > 64))
 		__raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
 	else
 		__raw_writeb(5, MCFINTC0_ICR0 + irq);
 
-
 	intc_irq_unmask(d);
 	return 0;
 }
@@ -175,8 +182,11 @@ void __init init_IRQ(void)
 	__raw_writeb(0xff, MCFINTC0_SIMR);
 	if (MCFINTC1_SIMR)
 		__raw_writeb(0xff, MCFINTC1_SIMR);
+	if (MCFINTC2_SIMR)
+		__raw_writeb(0xff, MCFINTC2_SIMR);
 
-	eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0);
+	eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) +
+						(MCFINTC2_ICR0 ? 64 : 0);
 	for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
 		if ((irq >= EINT1) && (irq <= EINT7))
 			irq_set_chip(irq, &intc_irq_chip_edge_port);
diff --git a/arch/m68k/platform/coldfire/m5206.c b/arch/m68k/platform/coldfire/m5206.c
index a8b81df653f0..6bfbeebd231b 100644
--- a/arch/m68k/platform/coldfire/m5206.c
+++ b/arch/m68k/platform/coldfire/m5206.c
@@ -16,15 +16,6 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(PP, 0, 8, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
 
 /***************************************************************************/
 
diff --git a/arch/m68k/platform/coldfire/m520x.c b/arch/m68k/platform/coldfire/m520x.c
index 3264b8883d5f..ea1be0e98ad6 100644
--- a/arch/m68k/platform/coldfire/m520x.c
+++ b/arch/m68k/platform/coldfire/m520x.c
@@ -19,22 +19,102 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
+#include <asm/mcfclk.h>
 
 /***************************************************************************/
 
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
-	MCFGPF(CS, 9, 3),
-	MCFGPF(FECI2C, 16, 4),
-	MCFGPF(QSPI, 24, 4),
-	MCFGPF(TIMER, 32, 4),
-	MCFGPF(UART, 40, 8),
-	MCFGPF(FECH, 48, 8),
-	MCFGPF(FECL, 56, 8),
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 36, MCF_CLK);
+DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
+DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
+DEFINE_CLK(0, "sdram.0", 42, MCF_CLK);
+
+struct clk *mcf_clks[] = {
+	&__clk_0_2, /* flexbus */
+	&__clk_0_12, /* fec.0 */
+	&__clk_0_17, /* edma */
+	&__clk_0_18, /* intc.0 */
+	&__clk_0_21, /* iack.0 */
+	&__clk_0_22, /* mcfi2c.0 */
+	&__clk_0_23, /* mcfqspi.0 */
+	&__clk_0_24, /* mcfuart.0 */
+	&__clk_0_25, /* mcfuart.1 */
+	&__clk_0_26, /* mcfuart.2 */
+	&__clk_0_28, /* mcftmr.0 */
+	&__clk_0_29, /* mcftmr.1 */
+	&__clk_0_30, /* mcftmr.2 */
+	&__clk_0_31, /* mcftmr.3 */
+
+	&__clk_0_32, /* mcfpit.0 */
+	&__clk_0_33, /* mcfpit.1 */
+	&__clk_0_34, /* mcfeport.0 */
+	&__clk_0_35, /* mcfwdt.0 */
+	&__clk_0_36, /* pll.0 */
+	&__clk_0_40, /* sys.0 */
+	&__clk_0_41, /* gpio.0 */
+	&__clk_0_42, /* sdram.0 */
+NULL,
 };
 
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+static struct clk * const enable_clks[] __initconst = {
+	&__clk_0_2, /* flexbus */
+	&__clk_0_18, /* intc.0 */
+	&__clk_0_21, /* iack.0 */
+	&__clk_0_24, /* mcfuart.0 */
+	&__clk_0_25, /* mcfuart.1 */
+	&__clk_0_26, /* mcfuart.2 */
+
+	&__clk_0_32, /* mcfpit.0 */
+	&__clk_0_33, /* mcfpit.1 */
+	&__clk_0_34, /* mcfeport.0 */
+	&__clk_0_36, /* pll.0 */
+	&__clk_0_40, /* sys.0 */
+	&__clk_0_41, /* gpio.0 */
+	&__clk_0_42, /* sdram.0 */
+};
+
+static struct clk * const disable_clks[] __initconst = {
+	&__clk_0_12, /* fec.0 */
+	&__clk_0_17, /* edma */
+	&__clk_0_22, /* mcfi2c.0 */
+	&__clk_0_23, /* mcfqspi.0 */
+	&__clk_0_28, /* mcftmr.0 */
+	&__clk_0_29, /* mcftmr.1 */
+	&__clk_0_30, /* mcftmr.2 */
+	&__clk_0_31, /* mcftmr.3 */
+	&__clk_0_35, /* mcfwdt.0 */
+};
+
+
+static void __init m520x_clk_init(void)
+{
+	unsigned i;
+
+	/* make sure these clocks are enabled */
+	for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+		__clk_init_enabled(enable_clks[i]);
+	/* make sure these clocks are disabled */
+	for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+		__clk_init_disabled(disable_clks[i]);
+}
 
 /***************************************************************************/
 
@@ -93,6 +173,7 @@ static void __init m520x_fec_init(void)
 void __init config_BSP(char *commandp, int size)
 {
 	mach_sched_init = hw_timer_init;
+	m520x_clk_init();
 	m520x_uarts_init();
 	m520x_fec_init();
 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
diff --git a/arch/m68k/platform/coldfire/m523x.c b/arch/m68k/platform/coldfire/m523x.c
index 5d57a4249412..d47dfd8f50a2 100644
--- a/arch/m68k/platform/coldfire/m523x.c
+++ b/arch/m68k/platform/coldfire/m523x.c
@@ -19,28 +19,6 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
-	MCFGPF(ADDR, 13, 3),
-	MCFGPF(DATAH, 16, 8),
-	MCFGPF(DATAL, 24, 8),
-	MCFGPF(BUSCTL, 32, 8),
-	MCFGPF(BS, 40, 4),
-	MCFGPF(CS, 49, 7),
-	MCFGPF(SDRAM, 56, 6),
-	MCFGPF(FECI2C, 64, 4),
-	MCFGPF(UARTH, 72, 2),
-	MCFGPF(UARTL, 80, 8),
-	MCFGPF(QSPI, 88, 5),
-	MCFGPF(TIMER, 96, 8),
-	MCFGPF(ETPU, 104, 3),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
 
 /***************************************************************************/
 
diff --git a/arch/m68k/platform/coldfire/m5249.c b/arch/m68k/platform/coldfire/m5249.c
index fdfa1edfd1ac..300e729a58d0 100644
--- a/arch/m68k/platform/coldfire/m5249.c
+++ b/arch/m68k/platform/coldfire/m5249.c
@@ -16,16 +16,6 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(GPIO0, 0, 32, MCFSIM2_GPIOENABLE, MCFSIM2_GPIOWRITE, MCFSIM2_GPIOREAD),
-	MCFGPS(GPIO1, 32, 32, MCFSIM2_GPIO1ENABLE, MCFSIM2_GPIO1WRITE, MCFSIM2_GPIO1READ),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
 
 /***************************************************************************/
 
diff --git a/arch/m68k/platform/coldfire/m525x.c b/arch/m68k/platform/coldfire/m525x.c
new file mode 100644
index 000000000000..8ce905f9b84f
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m525x.c
@@ -0,0 +1,66 @@
+/***************************************************************************/
+
+/*
+ *	525x.c
+ *
+ *	Copyright (C) 2012, Steven King <sfking@fdwdc.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+static void __init m525x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	/* set the GPIO function for the qspi cs gpios */
+	/* FIXME: replace with pinmux/pinctl support */
+	u32 f = readl(MCFSIM2_GPIOFUNC);
+	f |= (1 << MCFQSPI_CS2) | (1 << MCFQSPI_CS1) | (1 << MCFQSPI_CS0);
+	writel(f, MCFSIM2_GPIOFUNC);
+
+	/* QSPI irq setup */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+	       MCF_MBAR + MCFSIM_QSPIICR);
+	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+static void __init m525x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_COLDFIRE)
+	u32 r;
+
+	/* first I2C controller uses regular irq setup */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+			MCF_MBAR + MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+
+	/* second I2C controller is completely different */
+	r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+	r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
+	r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
+	writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+#endif /* IS_ENABLED(CONFIG_I2C_COLDFIRE) */
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+
+	m525x_qspi_init();
+	m525x_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m5272.c b/arch/m68k/platform/coldfire/m5272.c
index 43e36060da18..e68bc7a148eb 100644
--- a/arch/m68k/platform/coldfire/m5272.c
+++ b/arch/m68k/platform/coldfire/m5272.c
@@ -19,7 +19,6 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
 
 /***************************************************************************/
 
@@ -31,16 +30,6 @@ unsigned char ledbank = 0xff;
 
 /***************************************************************************/
 
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(PA,  0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-	MCFGPS(PB, 16, 16, MCFSIM_PBDDR, MCFSIM_PBDAT, MCFSIM_PBDAT),
-	MCFGPS(Pc, 32, 16, MCFSIM_PCDDR, MCFSIM_PCDAT, MCFSIM_PCDAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
 static void __init m5272_uarts_init(void)
 {
 	u32 v;
diff --git a/arch/m68k/platform/coldfire/m527x.c b/arch/m68k/platform/coldfire/m527x.c
index 9b0b66aabd1b..b3cb378c5e94 100644
--- a/arch/m68k/platform/coldfire/m527x.c
+++ b/arch/m68k/platform/coldfire/m527x.c
@@ -20,49 +20,6 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-#if defined(CONFIG_M5271)
-	MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
-	MCFGPF(ADDR, 13, 3),
-	MCFGPF(DATAH, 16, 8),
-	MCFGPF(DATAL, 24, 8),
-	MCFGPF(BUSCTL, 32, 8),
-	MCFGPF(BS, 40, 4),
-	MCFGPF(CS, 49, 7),
-	MCFGPF(SDRAM, 56, 6),
-	MCFGPF(FECI2C, 64, 4),
-	MCFGPF(UARTH, 72, 2),
-	MCFGPF(UARTL, 80, 8),
-	MCFGPF(QSPI, 88, 5),
-	MCFGPF(TIMER, 96, 8),
-#elif defined(CONFIG_M5275)
-	MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
-	MCFGPF(BUSCTL, 8, 8),
-	MCFGPF(ADDR, 21, 3),
-	MCFGPF(CS, 25, 7),
-	MCFGPF(FEC0H, 32, 8),
-	MCFGPF(FEC0L, 40, 8),
-	MCFGPF(FECI2C, 48, 6),
-	MCFGPF(QSPI, 56, 7),
-	MCFGPF(SDRAM, 64, 8),
-	MCFGPF(TIMERH, 72, 4),
-	MCFGPF(TIMERL, 80, 4),
-	MCFGPF(UARTL, 88, 8),
-	MCFGPF(FEC1H, 96, 8),
-	MCFGPF(FEC1L, 104, 8),
-	MCFGPF(BS, 114, 2),
-	MCFGPF(IRQ, 121, 7),
-	MCFGPF(USBH, 128, 1),
-	MCFGPF(USBL, 136, 8),
-	MCFGPF(UARTH, 144, 4),
-#endif
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
 
 /***************************************************************************/
 
diff --git a/arch/m68k/platform/coldfire/m528x.c b/arch/m68k/platform/coldfire/m528x.c
index 7ed1276b29dc..f1319e5d2546 100644
--- a/arch/m68k/platform/coldfire/m528x.c
+++ b/arch/m68k/platform/coldfire/m528x.c
@@ -21,37 +21,6 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(NQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
-	MCFGPS(TA, 8, 4, MCFGPTA_GPTDDR, MCFGPTA_GPTPORT, MCFGPTB_GPTPORT),
-	MCFGPS(TB, 16, 4, MCFGPTB_GPTDDR, MCFGPTB_GPTPORT, MCFGPTB_GPTPORT),
-	MCFGPS(QA, 24, 4, MCFQADC_DDRQA, MCFQADC_PORTQA, MCFQADC_PORTQA),
-	MCFGPS(QB, 32, 4, MCFQADC_DDRQB, MCFQADC_PORTQB, MCFQADC_PORTQB),
-	MCFGPF(A, 40, 8),
-	MCFGPF(B, 48, 8),
-	MCFGPF(C, 56, 8),
-	MCFGPF(D, 64, 8),
-	MCFGPF(E, 72, 8),
-	MCFGPF(F, 80, 8),
-	MCFGPF(G, 88, 8),
-	MCFGPF(H, 96, 8),
-	MCFGPF(J, 104, 8),
-	MCFGPF(DD, 112, 8),
-	MCFGPF(EH, 120, 8),
-	MCFGPF(EL, 128, 8),
-	MCFGPF(AS, 136, 6),
-	MCFGPF(QS, 144, 7),
-	MCFGPF(SD, 152, 6),
-	MCFGPF(TC, 160, 4),
-	MCFGPF(TD, 168, 4),
-	MCFGPF(UA, 176, 4),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
 
 /***************************************************************************/
 
@@ -74,7 +43,7 @@ static void __init m528x_uarts_init(void)
 	/* make sure PUAPAR is set for UART0 and UART1 */
 	port = readb(MCF5282_GPIO_PUAPAR);
 	port |= 0x03 | (0x03 << 2);
-	writeb(port, MCF5282_GPIO_PUAPAR);
+	writeb(port, MCFGPIO_PUAPAR);
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m5307.c b/arch/m68k/platform/coldfire/m5307.c
index 93b484976ab3..a568d2870d15 100644
--- a/arch/m68k/platform/coldfire/m5307.c
+++ b/arch/m68k/platform/coldfire/m5307.c
@@ -16,7 +16,6 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
 #include <asm/mcfwdebug.h>
 
 /***************************************************************************/
@@ -29,14 +28,6 @@ unsigned char ledbank = 0xff;
 
 /***************************************************************************/
 
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
 #if defined(CONFIG_NETtel) || \
diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m532x.c
index 5394223639f8..4819a44991ed 100644
--- a/arch/m68k/platform/coldfire/m532x.c
+++ b/arch/m68k/platform/coldfire/m532x.c
@@ -26,32 +26,144 @@
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 #include <asm/mcfdma.h>
-#include <asm/mcfgpio.h>
 #include <asm/mcfwdebug.h>
+#include <asm/mcfclk.h>
 
 /***************************************************************************/
 
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
-	MCFGPF(FECH, 8, 8),
-	MCFGPF(FECL, 16, 8),
-	MCFGPF(SSI, 24, 5),
-	MCFGPF(BUSCTL, 32, 4),
-	MCFGPF(BE, 40, 4),
-	MCFGPF(CS, 49, 5),
-	MCFGPF(PWM, 58, 4),
-	MCFGPF(FECI2C, 64, 4),
-	MCFGPF(UART, 72, 8),
-	MCFGPF(QSPI, 80, 6),
-	MCFGPF(TIMER, 88, 4),
-	MCFGPF(LCDDATAH, 96, 2),
-	MCFGPF(LCDDATAM, 104, 8),
-	MCFGPF(LCDDATAL, 112, 8),
-	MCFGPF(LCDCTLH, 120, 1),
-	MCFGPF(LCDCTLL, 128, 8),
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
+DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcfpwm.0", 36, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
+DEFINE_CLK(0, "mcfwdt.0", 38, MCF_CLK);
+DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
+DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
+DEFINE_CLK(0, "mcflcd.0", 43, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
+DEFINE_CLK(0, "sdram.0", 46, MCF_CLK);
+DEFINE_CLK(0, "ssi.0", 47, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
+
+DEFINE_CLK(1, "mdha.0", 32, MCF_CLK);
+DEFINE_CLK(1, "skha.0", 33, MCF_CLK);
+DEFINE_CLK(1, "rng.0", 34, MCF_CLK);
+
+struct clk *mcf_clks[] = {
+	&__clk_0_2,	/* flexbus */
+	&__clk_0_8,	/* mcfcan.0 */
+	&__clk_0_12,	/* fec.0 */
+	&__clk_0_17,	/* edma */
+	&__clk_0_18,	/* intc.0 */
+	&__clk_0_19,	/* intc.1 */
+	&__clk_0_21,	/* iack.0 */
+	&__clk_0_22,	/* mcfi2c.0 */
+	&__clk_0_23,	/* mcfqspi.0 */
+	&__clk_0_24,	/* mcfuart.0 */
+	&__clk_0_25,	/* mcfuart.1 */
+	&__clk_0_26,	/* mcfuart.2 */
+	&__clk_0_28,	/* mcftmr.0 */
+	&__clk_0_29,	/* mcftmr.1 */
+	&__clk_0_30,	/* mcftmr.2 */
+	&__clk_0_31,	/* mcftmr.3 */
+
+	&__clk_0_32,	/* mcfpit.0 */
+	&__clk_0_33,	/* mcfpit.1 */
+	&__clk_0_34,	/* mcfpit.2 */
+	&__clk_0_35,	/* mcfpit.3 */
+	&__clk_0_36,	/* mcfpwm.0 */
+	&__clk_0_37,	/* mcfeport.0 */
+	&__clk_0_38,	/* mcfwdt.0 */
+	&__clk_0_40,	/* sys.0 */
+	&__clk_0_41,	/* gpio.0 */
+	&__clk_0_42,	/* mcfrtc.0 */
+	&__clk_0_43,	/* mcflcd.0 */
+	&__clk_0_44,	/* mcfusb-otg.0 */
+	&__clk_0_45,	/* mcfusb-host.0 */
+	&__clk_0_46,	/* sdram.0 */
+	&__clk_0_47,	/* ssi.0 */
+	&__clk_0_48,	/* pll.0 */
+
+	&__clk_1_32,	/* mdha.0 */
+	&__clk_1_33,	/* skha.0 */
+	&__clk_1_34,	/* rng.0 */
+	NULL,
+};
+
+static struct clk * const enable_clks[] __initconst = {
+	&__clk_0_2,	/* flexbus */
+	&__clk_0_18,	/* intc.0 */
+	&__clk_0_19,	/* intc.1 */
+	&__clk_0_21,	/* iack.0 */
+	&__clk_0_24,	/* mcfuart.0 */
+	&__clk_0_25,	/* mcfuart.1 */
+	&__clk_0_26,	/* mcfuart.2 */
+
+	&__clk_0_32,	/* mcfpit.0 */
+	&__clk_0_33,	/* mcfpit.1 */
+	&__clk_0_37,	/* mcfeport.0 */
+	&__clk_0_40,	/* sys.0 */
+	&__clk_0_41,	/* gpio.0 */
+	&__clk_0_46,	/* sdram.0 */
+	&__clk_0_48,	/* pll.0 */
+};
+
+static struct clk * const disable_clks[] __initconst = {
+	&__clk_0_8,	/* mcfcan.0 */
+	&__clk_0_12,	/* fec.0 */
+	&__clk_0_17,	/* edma */
+	&__clk_0_22,	/* mcfi2c.0 */
+	&__clk_0_23,	/* mcfqspi.0 */
+	&__clk_0_28,	/* mcftmr.0 */
+	&__clk_0_29,	/* mcftmr.1 */
+	&__clk_0_30,	/* mcftmr.2 */
+	&__clk_0_31,	/* mcftmr.3 */
+	&__clk_0_34,	/* mcfpit.2 */
+	&__clk_0_35,	/* mcfpit.3 */
+	&__clk_0_36,	/* mcfpwm.0 */
+	&__clk_0_38,	/* mcfwdt.0 */
+	&__clk_0_42,	/* mcfrtc.0 */
+	&__clk_0_43,	/* mcflcd.0 */
+	&__clk_0_44,	/* mcfusb-otg.0 */
+	&__clk_0_45,	/* mcfusb-host.0 */
+	&__clk_0_47,	/* ssi.0 */
+	&__clk_1_32,	/* mdha.0 */
+	&__clk_1_33,	/* skha.0 */
+	&__clk_1_34,	/* rng.0 */
 };
 
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+static void __init m532x_clk_init(void)
+{
+	unsigned i;
+
+	/* make sure these clocks are enabled */
+	for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+		__clk_init_enabled(enable_clks[i]);
+	/* make sure these clocks are disabled */
+	for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+		__clk_init_disabled(disable_clks[i]);
+}
 
 /***************************************************************************/
 
@@ -98,8 +210,8 @@ void __init config_BSP(char *commandp, int size)
 		memset(commandp, 0, size);
 	}
 #endif
-
 	mach_sched_init = hw_timer_init;
+	m532x_clk_init();
 	m532x_uarts_init();
 	m532x_fec_init();
 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
diff --git a/arch/m68k/platform/coldfire/m5407.c b/arch/m68k/platform/coldfire/m5407.c
index faa6680b3404..bb6c746ae819 100644
--- a/arch/m68k/platform/coldfire/m5407.c
+++ b/arch/m68k/platform/coldfire/m5407.c
@@ -16,15 +16,6 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
 
 /***************************************************************************/
 
diff --git a/arch/m68k/platform/coldfire/m5441x.c b/arch/m68k/platform/coldfire/m5441x.c
new file mode 100644
index 000000000000..98a13cce93d8
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m5441x.c
@@ -0,0 +1,261 @@
+/*
+ *	m5441x.c -- support for Coldfire m5441x processors
+ *
+ *	(C) Copyright Steven King <sfking@fdwdc.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfdma.h>
+#include <asm/mcfclk.h>
+
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.1", 9, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.1", 14, MCF_CLK);
+DEFINE_CLK(0, "mcfdspi.1", 15, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
+DEFINE_CLK(0, "intc.2", 20, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfdspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.3", 27, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
+DEFINE_CLK(0, "mcfadc.0", 38, MCF_CLK);
+DEFINE_CLK(0, "mcfdac.0", 39, MCF_CLK);
+DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
+DEFINE_CLK(0, "mcfsim.0", 43, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
+DEFINE_CLK(0, "mcfddr-sram.0", 46, MCF_CLK);
+DEFINE_CLK(0, "mcfssi.0", 47, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
+DEFINE_CLK(0, "mcfrng.0", 49, MCF_CLK);
+DEFINE_CLK(0, "mcfssi.1", 50, MCF_CLK);
+DEFINE_CLK(0, "mcfsdhc.0", 51, MCF_CLK);
+DEFINE_CLK(0, "enet-fec.0", 53, MCF_CLK);
+DEFINE_CLK(0, "enet-fec.1", 54, MCF_CLK);
+DEFINE_CLK(0, "switch.0", 55, MCF_CLK);
+DEFINE_CLK(0, "switch.1", 56, MCF_CLK);
+DEFINE_CLK(0, "nand.0", 63, MCF_CLK);
+
+DEFINE_CLK(1, "mcfow.0", 2, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.2", 4, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.3", 5, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.4", 6, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.5", 7, MCF_CLK);
+DEFINE_CLK(1, "mcfuart.4", 24, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.5", 25, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.6", 26, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.7", 27, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.8", 28, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.9", 29, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfpwm.0", 34, MCF_BUSCLK);
+DEFINE_CLK(1, "sys.0", 36, MCF_BUSCLK);
+DEFINE_CLK(1, "gpio.0", 37, MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&__clk_0_2,
+	&__clk_0_8,
+	&__clk_0_9,
+	&__clk_0_14,
+	&__clk_0_15,
+	&__clk_0_17,
+	&__clk_0_18,
+	&__clk_0_19,
+	&__clk_0_20,
+	&__clk_0_22,
+	&__clk_0_23,
+	&__clk_0_24,
+	&__clk_0_25,
+	&__clk_0_26,
+	&__clk_0_27,
+	&__clk_0_28,
+	&__clk_0_29,
+	&__clk_0_30,
+	&__clk_0_31,
+	&__clk_0_32,
+	&__clk_0_33,
+	&__clk_0_34,
+	&__clk_0_35,
+	&__clk_0_37,
+	&__clk_0_38,
+	&__clk_0_39,
+	&__clk_0_42,
+	&__clk_0_43,
+	&__clk_0_44,
+	&__clk_0_45,
+	&__clk_0_46,
+	&__clk_0_47,
+	&__clk_0_48,
+	&__clk_0_49,
+	&__clk_0_50,
+	&__clk_0_51,
+	&__clk_0_53,
+	&__clk_0_54,
+	&__clk_0_55,
+	&__clk_0_56,
+	&__clk_0_63,
+
+	&__clk_1_2,
+	&__clk_1_4,
+	&__clk_1_5,
+	&__clk_1_6,
+	&__clk_1_7,
+	&__clk_1_24,
+	&__clk_1_25,
+	&__clk_1_26,
+	&__clk_1_27,
+	&__clk_1_28,
+	&__clk_1_29,
+	&__clk_1_34,
+	&__clk_1_36,
+	&__clk_1_37,
+	NULL,
+};
+
+
+static struct clk * const enable_clks[] __initconst = {
+	/* make sure these clocks are enabled */
+	&__clk_0_18, /* intc0 */
+	&__clk_0_19, /* intc0 */
+	&__clk_0_20, /* intc0 */
+	&__clk_0_24, /* uart0 */
+	&__clk_0_25, /* uart1 */
+	&__clk_0_26, /* uart2 */
+	&__clk_0_27, /* uart3 */
+
+	&__clk_0_33, /* pit.1 */
+	&__clk_0_37, /* eport */
+	&__clk_0_48, /* pll */
+
+	&__clk_1_36, /* CCM/reset module/Power management */
+	&__clk_1_37, /* gpio */
+};
+static struct clk * const disable_clks[] __initconst = {
+	&__clk_0_8, /* can.0 */
+	&__clk_0_9, /* can.1 */
+	&__clk_0_14, /* i2c.1 */
+	&__clk_0_15, /* dspi.1 */
+	&__clk_0_17, /* eDMA */
+	&__clk_0_22, /* i2c.0 */
+	&__clk_0_23, /* dspi.0 */
+	&__clk_0_28, /* tmr.1 */
+	&__clk_0_29, /* tmr.2 */
+	&__clk_0_30, /* tmr.2 */
+	&__clk_0_31, /* tmr.3 */
+	&__clk_0_32, /* pit.0 */
+	&__clk_0_34, /* pit.2 */
+	&__clk_0_35, /* pit.3 */
+	&__clk_0_38, /* adc */
+	&__clk_0_39, /* dac */
+	&__clk_0_44, /* usb otg */
+	&__clk_0_45, /* usb host */
+	&__clk_0_47, /* ssi.0 */
+	&__clk_0_49, /* rng */
+	&__clk_0_50, /* ssi.1 */
+	&__clk_0_51, /* eSDHC */
+	&__clk_0_53, /* enet-fec */
+	&__clk_0_54, /* enet-fec */
+	&__clk_0_55, /* switch.0 */
+	&__clk_0_56, /* switch.1 */
+
+	&__clk_1_2, /* 1-wire */
+	&__clk_1_4, /* i2c.2 */
+	&__clk_1_5, /* i2c.3 */
+	&__clk_1_6, /* i2c.4 */
+	&__clk_1_7, /* i2c.5 */
+	&__clk_1_24, /* uart 4 */
+	&__clk_1_25, /* uart 5 */
+	&__clk_1_26, /* uart 6 */
+	&__clk_1_27, /* uart 7 */
+	&__clk_1_28, /* uart 8 */
+	&__clk_1_29, /* uart 9 */
+};
+
+static void __init m5441x_clk_init(void)
+{
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+		__clk_init_enabled(enable_clks[i]);
+	/* make sure these clocks are disabled */
+	for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+		__clk_init_disabled(disable_clks[i]);
+}
+
+static void __init m5441x_uarts_init(void)
+{
+	__raw_writeb(0x0f, MCFGPIO_PAR_UART0);
+	__raw_writeb(0x00, MCFGPIO_PAR_UART1);
+	__raw_writeb(0x00, MCFGPIO_PAR_UART2);
+}
+
+static void __init m5441x_fec_init(void)
+{
+	__raw_writeb(0x03, MCFGPIO_PAR_FEC);
+}
+
+void __init config_BSP(char *commandp, int size)
+{
+	m5441x_clk_init();
+	mach_sched_init = hw_timer_init;
+	m5441x_uarts_init();
+	m5441x_fec_init();
+}
+
+
+#if IS_ENABLED(CONFIG_RTC_DRV_M5441x)
+static struct resource m5441x_rtc_resources[] = {
+	{
+		.start		= MCFRTC_BASE,
+		.end		= MCFRTC_BASE + MCFRTC_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_RTC,
+		.end		= MCF_IRQ_RTC,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m5441x_rtc = {
+	.name			= "mcfrtc",
+	.id			= 0,
+	.resource		= m5441x_rtc_resources,
+	.num_resources		= ARRAY_SIZE(m5441x_rtc_resources),
+};
+#endif
+
+static struct platform_device *m5441x_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_RTC_DRV_M5441x)
+	&m5441x_rtc,
+#endif
+};
+
+static int __init init_BSP(void)
+{
+	platform_add_devices(m5441x_devices, ARRAY_SIZE(m5441x_devices));
+	return 0;
+}
+
+arch_initcall(init_BSP);
diff --git a/arch/m68k/platform/coldfire/m54xx.c b/arch/m68k/platform/coldfire/m54xx.c
index 20672dadb252..2081c6cbb3de 100644
--- a/arch/m68k/platform/coldfire/m54xx.c
+++ b/arch/m68k/platform/coldfire/m54xx.c
@@ -21,19 +21,12 @@
 #include <asm/m54xxsim.h>
 #include <asm/mcfuart.h>
 #include <asm/m54xxgpt.h>
-#include <asm/mcfgpio.h>
 #ifdef CONFIG_MMU
 #include <asm/mmu_context.h>
 #endif
 
 /***************************************************************************/
 
-struct mcf_gpio_chip mcf_gpio_chips[] = { };
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
 static void __init m54xx_uarts_init(void)
 {
 	/* enable io pins */
diff --git a/arch/m68k/platform/coldfire/mcf8390.c b/arch/m68k/platform/coldfire/mcf8390.c
new file mode 100644
index 000000000000..23a6874a3248
--- /dev/null
+++ b/arch/m68k/platform/coldfire/mcf8390.c
@@ -0,0 +1,38 @@
+/*
+ * mcf8390.c  -- platform support for 8390 ethernet on many boards
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/platform_device.h>
+#include <asm/mcf8390.h>
+
+static struct resource mcf8390_resources[] = {
+	{
+		.start	= NE2000_ADDR,
+		.end	= NE2000_ADDR + NE2000_ADDRSIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= NE2000_IRQ_VECTOR,
+		.end	= NE2000_IRQ_VECTOR,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static int __init mcf8390_platform_init(void)
+{
+	platform_device_register_simple("mcf8390", -1, mcf8390_resources,
+		ARRAY_SIZE(mcf8390_resources));
+	return 0;
+}
+
+arch_initcall(mcf8390_platform_init);
diff --git a/arch/m68k/platform/coldfire/pci.c b/arch/m68k/platform/coldfire/pci.c
new file mode 100644
index 000000000000..553210d3d4c1
--- /dev/null
+++ b/arch/m68k/platform/coldfire/pci.c
@@ -0,0 +1,327 @@
+/*
+ * pci.c -- PCI bus support for ColdFire processors
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/m54xxpci.h>
+
+/*
+ * Memory and IO mappings. We use a 1:1 mapping for local host memory to
+ * PCI bus memory (no reason not to really). IO space doesn't matter, we
+ * always use access functions for that. The device configuration space is
+ * mapped over the IO map space when we enable it in the PCICAR register.
+ */
+#define	PCI_MEM_PA	0xf0000000		/* Host physical address */
+#define	PCI_MEM_BA	0xf0000000		/* Bus physical address */
+#define	PCI_MEM_SIZE	0x08000000		/* 128 MB */
+#define	PCI_MEM_MASK	(PCI_MEM_SIZE - 1)
+
+#define	PCI_IO_PA	0xf8000000		/* Host physical address */
+#define	PCI_IO_BA	0x00000000		/* Bus physical address */
+#define	PCI_IO_SIZE	0x00010000		/* 64k */
+#define	PCI_IO_MASK	(PCI_IO_SIZE - 1)
+
+static struct pci_bus *rootbus;
+static unsigned long iospace;
+
+/*
+ * We need to be carefull probing on bus 0 (directly connected to host
+ * bridge). We should only acccess the well defined possible devices in
+ * use, ignore aliases and the like.
+ */
+static unsigned char mcf_host_slot2sid[32] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 1, 2, 0, 3, 4, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+};
+
+static unsigned char mcf_host_irq[] = {
+	0, 69, 69, 71, 71,
+};
+
+
+static inline void syncio(void)
+{
+	/* The ColdFire "nop" instruction waits for all bus IO to complete */
+	__asm__ __volatile__ ("nop");
+}
+
+/*
+ * Configuration space access functions. Configuration space access is
+ * through the IO mapping window, enabling it via the PCICAR register.
+ */
+static unsigned long mcf_mk_pcicar(int bus, unsigned int devfn, int where)
+{
+	return (bus << PCICAR_BUSN) | (devfn << PCICAR_DEVFNN) | (where & 0xfc);
+}
+
+static int mcf_pci_readconfig(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 *value)
+{
+	unsigned long addr;
+
+	*value = 0xffffffff;
+
+	if (bus->number == 0) {
+		if (mcf_host_slot2sid[PCI_SLOT(devfn)] == 0)
+			return PCIBIOS_SUCCESSFUL;
+	}
+
+	syncio();
+	addr = mcf_mk_pcicar(bus->number, devfn, where);
+	__raw_writel(PCICAR_E | addr, PCICAR);
+	addr = iospace + (where & 0x3);
+
+	switch (size) {
+	case 1:
+		*value = __raw_readb(addr);
+		break;
+	case 2:
+		*value = le16_to_cpu(__raw_readw(addr));
+		break;
+	default:
+		*value = le32_to_cpu(__raw_readl(addr));
+		break;
+	}
+
+	syncio();
+	__raw_writel(0, PCICAR);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int mcf_pci_writeconfig(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 value)
+{
+	unsigned long addr;
+
+	if (bus->number == 0) {
+		if (mcf_host_slot2sid[PCI_SLOT(devfn)] == 0)
+			return PCIBIOS_SUCCESSFUL;
+	}
+
+	syncio();
+	addr = mcf_mk_pcicar(bus->number, devfn, where);
+	__raw_writel(PCICAR_E | addr, PCICAR);
+	addr = iospace + (where & 0x3);
+
+	switch (size) {
+	case 1:
+		 __raw_writeb(value, addr);
+		break;
+	case 2:
+		__raw_writew(cpu_to_le16(value), addr);
+		break;
+	default:
+		__raw_writel(cpu_to_le32(value), addr);
+		break;
+	}
+
+	syncio();
+	__raw_writel(0, PCICAR);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mcf_pci_ops = {
+	.read	= mcf_pci_readconfig,
+	.write	= mcf_pci_writeconfig,
+};
+
+/*
+ *	IO address space access functions. Pretty strait forward, these are
+ *	directly mapped in to the IO mapping window. And that is mapped into
+ *	virtual address space.
+ */
+u8 mcf_pci_inb(u32 addr)
+{
+	return __raw_readb(iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_inb);
+
+u16 mcf_pci_inw(u32 addr)
+{
+	return le16_to_cpu(__raw_readw(iospace + (addr & PCI_IO_MASK)));
+}
+EXPORT_SYMBOL(mcf_pci_inw);
+
+u32 mcf_pci_inl(u32 addr)
+{
+	return le32_to_cpu(__raw_readl(iospace + (addr & PCI_IO_MASK)));
+}
+EXPORT_SYMBOL(mcf_pci_inl);
+
+void mcf_pci_insb(u32 addr, u8 *buf, u32 len)
+{
+	for (; len; len--)
+		*buf++ = mcf_pci_inb(addr);
+}
+EXPORT_SYMBOL(mcf_pci_insb);
+
+void mcf_pci_insw(u32 addr, u16 *buf, u32 len)
+{
+	for (; len; len--)
+		*buf++ = mcf_pci_inw(addr);
+}
+EXPORT_SYMBOL(mcf_pci_insw);
+
+void mcf_pci_insl(u32 addr, u32 *buf, u32 len)
+{
+	for (; len; len--)
+		*buf++ = mcf_pci_inl(addr);
+}
+EXPORT_SYMBOL(mcf_pci_insl);
+
+void mcf_pci_outb(u8 v, u32 addr)
+{
+	__raw_writeb(v, iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_outb);
+
+void mcf_pci_outw(u16 v, u32 addr)
+{
+	__raw_writew(cpu_to_le16(v), iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_outw);
+
+void mcf_pci_outl(u32 v, u32 addr)
+{
+	__raw_writel(cpu_to_le32(v), iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_outl);
+
+void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len)
+{
+	for (; len; len--)
+		mcf_pci_outb(*buf++, addr);
+}
+EXPORT_SYMBOL(mcf_pci_outsb);
+
+void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len)
+{
+	for (; len; len--)
+		mcf_pci_outw(*buf++, addr);
+}
+EXPORT_SYMBOL(mcf_pci_outsw);
+
+void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len)
+{
+	for (; len; len--)
+		mcf_pci_outl(*buf++, addr);
+}
+EXPORT_SYMBOL(mcf_pci_outsl);
+
+/*
+ * Initialize the PCI bus registers, and scan the bus.
+ */
+static struct resource mcf_pci_mem = {
+	.name	= "PCI Memory space",
+	.start	= PCI_MEM_PA,
+	.end	= PCI_MEM_PA + PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource mcf_pci_io = {
+	.name	= "PCI IO space",
+	.start	= 0x400,
+	.end	= 0x10000 - 1,
+	.flags	= IORESOURCE_IO,
+};
+
+/*
+ * Interrupt mapping and setting.
+ */
+static int mcf_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int sid;
+
+	sid = mcf_host_slot2sid[slot];
+	if (sid)
+		return mcf_host_irq[sid];
+	return 0;
+}
+
+static int __init mcf_pci_init(void)
+{
+	pr_info("ColdFire: PCI bus initialization...\n");
+
+	/* Reset the external PCI bus */
+	__raw_writel(PCIGSCR_RESET, PCIGSCR);
+	__raw_writel(0, PCITCR);
+
+	request_resource(&iomem_resource, &mcf_pci_mem);
+	request_resource(&iomem_resource, &mcf_pci_io);
+
+	/* Configure PCI arbiter */
+	__raw_writel(PACR_INTMPRI | PACR_INTMINTE | PACR_EXTMPRI(0x1f) |
+		PACR_EXTMINTE(0x1f), PACR);
+
+	/* Set required multi-function pins for PCI bus use */
+	__raw_writew(0x3ff, MCF_PAR_PCIBG);
+	__raw_writew(0x3ff, MCF_PAR_PCIBR);
+
+	/* Set up config space for local host bus controller */
+	__raw_writel(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+		PCI_COMMAND_INVALIDATE, PCISCR);
+	__raw_writel(PCICR1_LT(32) | PCICR1_CL(8), PCICR1);
+	__raw_writel(0, PCICR2);
+
+	/*
+	 * Set up the initiator windows for memory and IO mapping.
+	 * These give the CPU bus access onto the PCI bus. One for each of
+	 * PCI memory and IO address spaces.
+	 */
+	__raw_writel(WXBTAR(PCI_MEM_PA, PCI_MEM_BA, PCI_MEM_SIZE),
+		PCIIW0BTAR);
+	__raw_writel(WXBTAR(PCI_IO_PA, PCI_IO_BA, PCI_IO_SIZE),
+		PCIIW1BTAR);
+	__raw_writel(PCIIWCR_W0_MEM /*| PCIIWCR_W0_MRDL*/ | PCIIWCR_W0_E |
+		PCIIWCR_W1_IO | PCIIWCR_W1_E, PCIIWCR);
+
+	/*
+	 * Set up the target windows for access from the PCI bus back to the
+	 * CPU bus. All we need is access to system RAM (for mastering).
+	 */
+	__raw_writel(CONFIG_RAMBASE, PCIBAR1);
+	__raw_writel(CONFIG_RAMBASE | PCITBATR1_E, PCITBATR1);
+
+	/* Keep a virtual mapping to IO/config space active */
+	iospace = (unsigned long) ioremap(PCI_IO_PA, PCI_IO_SIZE);
+	if (iospace == 0)
+		return -ENODEV;
+	pr_info("Coldfire: PCI IO/config window mapped to 0x%x\n",
+		(u32) iospace);
+
+	/* Turn of PCI reset, and wait for devices to settle */
+	__raw_writel(0, PCIGSCR);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(msecs_to_jiffies(200));
+
+	rootbus = pci_scan_bus(0, &mcf_pci_ops, NULL);
+	rootbus->resource[0] = &mcf_pci_io;
+	rootbus->resource[1] = &mcf_pci_mem;
+
+	pci_fixup_irqs(pci_common_swizzle, mcf_pci_map_irq);
+	pci_bus_size_bridges(rootbus);
+	pci_bus_assign_resources(rootbus);
+	pci_enable_bridges(rootbus);
+	pci_bus_add_devices(rootbus);
+	return 0;
+}
+
+subsys_initcall(mcf_pci_init);
diff --git a/arch/m68k/platform/coldfire/pinmux.c b/arch/m68k/platform/coldfire/pinmux.c
deleted file mode 100644
index 8c62b825939f..000000000000
--- a/arch/m68k/platform/coldfire/pinmux.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Coldfire generic GPIO pinmux support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; version 2 of the License.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include <asm/pinmux.h>
-
-int mcf_pinmux_request(unsigned pinmux, unsigned func)
-{
-	return 0;
-}
-
-void mcf_pinmux_release(unsigned pinmux, unsigned func)
-{
-}
diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c
index e62dbbcb10f6..e8f3b97b0f77 100644
--- a/arch/m68k/platform/coldfire/pit.c
+++ b/arch/m68k/platform/coldfire/pit.c
@@ -93,7 +93,7 @@ struct clock_event_device cf_pit_clockevent = {
 	.set_mode	= init_cf_pit_timer,
 	.set_next_event	= cf_pit_next_event,
 	.shift		= 32,
-	.irq		= MCFINT_VECBASE + MCFINT_PIT1,
+	.irq		= MCF_IRQ_PIT1,
 };
 
 
@@ -159,7 +159,7 @@ void hw_timer_init(irq_handler_t handler)
 		clockevent_delta2ns(0x3f, &cf_pit_clockevent);
 	clockevents_register_device(&cf_pit_clockevent);
 
-	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
+	setup_irq(MCF_IRQ_PIT1, &pit_irq);
 
 	clocksource_register_hz(&pit_clk, FREQ);
 }
diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
index ed96ce50d79f..0a273e75408c 100644
--- a/arch/m68k/platform/coldfire/timers.c
+++ b/arch/m68k/platform/coldfire/timers.c
@@ -36,7 +36,7 @@
  */
 void coldfire_profile_init(void);
 
-#if defined(CONFIG_M532x)
+#if defined(CONFIG_M532x) || defined(CONFIG_M5441x)
 #define	__raw_readtrr	__raw_readl
 #define	__raw_writetrr	__raw_writel
 #else
author	Linus Torvalds <torvalds@linux-foundation.org>	2012-07-25 02:20:51 +0200
committer	Linus Torvalds <torvalds@linux-foundation.org>	2012-07-25 02:20:51 +0200
commit	2c05b2c838e7adaabb7265ad5d5b632315c20821 (patch)
tree	cb29c9de665f216825a7932afb7c6329ab9ae158 /arch
parent	Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma (diff)
parent	m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs (diff)
download	linux-2c05b2c838e7adaabb7265ad5d5b632315c20821.tar.xz linux-2c05b2c838e7adaabb7265ad5d5b632315c20821.zip