summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 04:11:38 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 04:11:38 +0200
commit9cd11c0c47b8690b47e7573311ce5c483cb344ed (patch)
tree59f51c2bb3f73b21005105095d7321d35616ca9d /arch
parentMerge tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc (diff)
parentARM: add v7 multi-platform defconfig (diff)
downloadlinux-9cd11c0c47b8690b47e7573311ce5c483cb344ed.tar.xz
linux-9cd11c0c47b8690b47e7573311ce5c483cb344ed.zip
Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig165
-rw-r--r--arch/arm/Kconfig.debug33
-rw-r--r--arch/arm/Makefile148
-rw-r--r--arch/arm/boot/Makefile2
-rw-r--r--arch/arm/boot/compressed/misc.c6
-rw-r--r--arch/arm/boot/dts/Makefile101
-rw-r--r--arch/arm/configs/multi_v7_defconfig57
-rw-r--r--arch/arm/include/asm/gpio.h2
-rw-r--r--arch/arm/include/asm/mach/arch.h7
-rw-r--r--arch/arm/include/asm/smp.h48
-rw-r--r--arch/arm/include/asm/timex.h4
-rw-r--r--arch/arm/include/debug/highbank.S (renamed from arch/arm/mach-highbank/include/mach/debug-macro.S)6
-rw-r--r--arch/arm/include/debug/icedcc.S90
-rw-r--r--arch/arm/include/debug/mvebu.S (renamed from arch/arm/mach-mvebu/include/mach/debug-macro.S)3
-rw-r--r--arch/arm/include/debug/picoxcell.S (renamed from arch/arm/mach-picoxcell/include/mach/debug-macro.S)4
-rw-r--r--arch/arm/include/debug/socfpga.S (renamed from arch/arm/mach-socfpga/include/mach/debug-macro.S)0
-rw-r--r--arch/arm/include/debug/vexpress.S (renamed from arch/arm/mach-vexpress/include/mach/debug-macro.S)0
-rw-r--r--arch/arm/kernel/debug.S87
-rw-r--r--arch/arm/kernel/head.S4
-rw-r--r--arch/arm/kernel/setup.c4
-rw-r--r--arch/arm/kernel/smp.c72
-rw-r--r--arch/arm/mach-at91/Makefile.boot24
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c2
-rw-r--r--arch/arm/mach-at91/include/mach/at_hdmac.h61
-rw-r--r--arch/arm/mach-at91/include/mach/atmel-mci.h2
-rw-r--r--arch/arm/mach-bcm2835/Makefile.boot2
-rw-r--r--arch/arm/mach-davinci/aemif.c2
-rw-r--r--arch/arm/mach-davinci/board-da830-evm.c8
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c6
-rw-r--r--arch/arm/mach-davinci/board-dm355-evm.c8
-rw-r--r--arch/arm/mach-davinci/board-dm355-leopard.c8
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c8
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c10
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c6
-rw-r--r--arch/arm/mach-davinci/board-mityomapl138.c4
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c8
-rw-r--r--arch/arm/mach-davinci/board-sffsdr.c4
-rw-r--r--arch/arm/mach-davinci/davinci.h2
-rw-r--r--arch/arm/mach-davinci/devices.c4
-rw-r--r--arch/arm/mach-davinci/dm355.c2
-rw-r--r--arch/arm/mach-davinci/dm365.c4
-rw-r--r--arch/arm/mach-davinci/include/mach/aemif.h36
-rw-r--r--arch/arm/mach-davinci/include/mach/da8xx.h8
-rw-r--r--arch/arm/mach-davinci/include/mach/i2c.h26
-rw-r--r--arch/arm/mach-davinci/include/mach/keyscan.h42
-rw-r--r--arch/arm/mach-davinci/include/mach/mmc.h39
-rw-r--r--arch/arm/mach-davinci/include/mach/nand.h90
-rw-r--r--arch/arm/mach-davinci/include/mach/spi.h89
-rw-r--r--arch/arm/mach-davinci/include/mach/tnetv107x.h4
-rw-r--r--arch/arm/mach-davinci/include/mach/usb.h59
-rw-r--r--arch/arm/mach-davinci/usb.c2
-rw-r--r--arch/arm/mach-dove/common.c2
-rw-r--r--arch/arm/mach-dove/include/mach/gpio.h9
-rw-r--r--arch/arm/mach-dove/irq.c1
-rw-r--r--arch/arm/mach-dove/mpp.c1
-rw-r--r--arch/arm/mach-ep93xx/core.c6
-rw-r--r--arch/arm/mach-ep93xx/dma.c2
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c4
-rw-r--r--arch/arm/mach-ep93xx/include/mach/dma.h93
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h35
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h29
-rw-r--r--arch/arm/mach-ep93xx/include/mach/fb.h56
-rw-r--r--arch/arm/mach-ep93xx/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-ep93xx/simone.c2
-rw-r--r--arch/arm/mach-ep93xx/snappercl15.c2
-rw-r--r--arch/arm/mach-ep93xx/vision_ep9307.c4
-rw-r--r--arch/arm/mach-exynos/Makefile.boot3
-rw-r--r--arch/arm/mach-exynos/common.h5
-rw-r--r--arch/arm/mach-exynos/dev-audio.c2
-rw-r--r--arch/arm/mach-exynos/dev-ohci.c2
-rw-r--r--arch/arm/mach-exynos/hotplug.c18
-rw-r--r--arch/arm/mach-exynos/include/mach/ohci.h21
-rw-r--r--arch/arm/mach-exynos/mach-armlex4210.c1
-rw-r--r--arch/arm/mach-exynos/mach-exynos5-dt.c1
-rw-r--r--arch/arm/mach-exynos/mach-nuri.c7
-rw-r--r--arch/arm/mach-exynos/mach-origen.c7
-rw-r--r--arch/arm/mach-exynos/mach-smdk4x12.c4
-rw-r--r--arch/arm/mach-exynos/mach-smdkv310.c8
-rw-r--r--arch/arm/mach-exynos/mach-universal_c210.c5
-rw-r--r--arch/arm/mach-exynos/platsmp.c27
-rw-r--r--arch/arm/mach-exynos/setup-i2c0.c2
-rw-r--r--arch/arm/mach-exynos/setup-i2c1.c2
-rw-r--r--arch/arm/mach-exynos/setup-i2c2.c2
-rw-r--r--arch/arm/mach-exynos/setup-i2c3.c2
-rw-r--r--arch/arm/mach-exynos/setup-i2c4.c2
-rw-r--r--arch/arm/mach-exynos/setup-i2c5.c2
-rw-r--r--arch/arm/mach-exynos/setup-i2c6.c2
-rw-r--r--arch/arm/mach-exynos/setup-i2c7.c2
-rw-r--r--arch/arm/mach-highbank/Kconfig15
-rw-r--r--arch/arm/mach-highbank/Makefile.boot1
-rw-r--r--arch/arm/mach-highbank/core.h9
-rw-r--r--arch/arm/mach-highbank/highbank.c2
-rw-r--r--arch/arm/mach-highbank/hotplug.c16
-rw-r--r--arch/arm/mach-highbank/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-highbank/include/mach/timex.h6
-rw-r--r--arch/arm/mach-highbank/include/mach/uncompress.h9
-rw-r--r--arch/arm/mach-highbank/platsmp.c18
-rw-r--r--arch/arm/mach-highbank/pm.c4
-rw-r--r--arch/arm/mach-imx/Makefile.boot11
-rw-r--r--arch/arm/mach-imx/ehci-imx25.c2
-rw-r--r--arch/arm/mach-imx/ehci-imx27.c2
-rw-r--r--arch/arm/mach-imx/ehci-imx31.c2
-rw-r--r--arch/arm/mach-imx/ehci-imx35.c2
-rw-r--r--arch/arm/mach-imx/ehci-imx5.c2
-rw-r--r--arch/arm/mach-imx/hotplug.c16
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c2
-rw-r--r--arch/arm/mach-imx/mx1-camera-fiq-ksym.c2
-rw-r--r--arch/arm/mach-imx/platsmp.c18
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-kirkwood/Makefile.boot11
-rw-r--r--arch/arm/mach-kirkwood/board-dreamplug.c2
-rw-r--r--arch/arm/mach-kirkwood/board-goflexnet.c2
-rw-r--r--arch/arm/mach-kirkwood/common.c10
-rw-r--r--arch/arm/mach-kirkwood/d2net_v2-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/db88f6281-bp-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/dockstar-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/guruplug-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/include/mach/gpio.h9
-rw-r--r--arch/arm/mach-kirkwood/include/mach/leds-netxbig.h55
-rw-r--r--arch/arm/mach-kirkwood/include/mach/leds-ns2.h26
-rw-r--r--arch/arm/mach-kirkwood/irq.c1
-rw-r--r--arch/arm/mach-kirkwood/netspace_v2-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/netxbig_v2-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/openrd-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/rd88f6192-nas-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/rd88f6281-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/sheevaplug-setup.c2
-rw-r--r--arch/arm/mach-lpc32xx/Makefile.boot2
-rw-r--r--arch/arm/mach-mmp/aspenite.c2
-rw-r--r--arch/arm/mach-mmp/include/mach/mmp2.h2
-rw-r--r--arch/arm/mach-mmp/include/mach/pxa168.h4
-rw-r--r--arch/arm/mach-mmp/include/mach/pxa910.h2
-rw-r--r--arch/arm/mach-mmp/include/mach/sram.h35
-rw-r--r--arch/arm/mach-mmp/sram.c2
-rw-r--r--arch/arm/mach-mmp/teton_bga.c2
-rw-r--r--arch/arm/mach-msm/Makefile.boot3
-rw-r--r--arch/arm/mach-msm/board-dt-8660.c1
-rw-r--r--arch/arm/mach-msm/board-dt-8960.c1
-rw-r--r--arch/arm/mach-msm/board-qsd8x50.c2
-rw-r--r--arch/arm/mach-msm/board-trout-mmc.c2
-rw-r--r--arch/arm/mach-msm/board-trout-panel.c2
-rw-r--r--arch/arm/mach-msm/common.h2
-rw-r--r--arch/arm/mach-msm/core.h2
-rw-r--r--arch/arm/mach-msm/devices-msm7x00.c2
-rw-r--r--arch/arm/mach-msm/devices-msm7x30.c2
-rw-r--r--arch/arm/mach-msm/devices-qsd8x50.c2
-rw-r--r--arch/arm/mach-msm/hotplug.c18
-rw-r--r--arch/arm/mach-msm/include/mach/board.h2
-rw-r--r--arch/arm/mach-msm/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-msm/include/mach/mmc.h30
-rw-r--r--arch/arm/mach-msm/include/mach/msm_fb.h147
-rw-r--r--arch/arm/mach-msm/platsmp.c24
-rw-r--r--arch/arm/mach-mv78xx0/common.c4
-rw-r--r--arch/arm/mach-mv78xx0/irq.c1
-rw-r--r--arch/arm/mach-mvebu/Kconfig10
-rw-r--r--arch/arm/mach-mvebu/Makefile2
-rw-r--r--arch/arm/mach-mvebu/Makefile.boot3
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.c2
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.h (renamed from arch/arm/mach-mvebu/include/mach/armada-370-xp.h)0
-rw-r--r--arch/arm/mach-mvebu/include/mach/timex.h13
-rw-r--r--arch/arm/mach-mvebu/include/mach/uncompress.h43
-rw-r--r--arch/arm/mach-mxs/Makefile.boot10
-rw-r--r--arch/arm/mach-mxs/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-netx/include/mach/eth.h27
-rw-r--r--arch/arm/mach-netx/nxdb500.c2
-rw-r--r--arch/arm/mach-netx/nxdkn.c2
-rw-r--r--arch/arm/mach-netx/nxeb500hmi.c2
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c2
-rw-r--r--arch/arm/mach-nomadik/include/mach/gpio.h4
-rw-r--r--arch/arm/mach-nomadik/include/mach/nand.h16
-rw-r--r--arch/arm/mach-omap2/Makefile.boot6
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c1
-rw-r--r--arch/arm/mach-omap2/board-generic.c2
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c1
-rw-r--r--arch/arm/mach-omap2/common.h5
-rw-r--r--arch/arm/mach-omap2/omap-hotplug.c16
-rw-r--r--arch/arm/mach-omap2/omap-smp.c18
-rw-r--r--arch/arm/mach-orion5x/common.c4
-rw-r--r--arch/arm/mach-orion5x/d2net-setup.c1
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c2
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c1
-rw-r--r--arch/arm/mach-orion5x/include/mach/gpio.h9
-rw-r--r--arch/arm/mach-orion5x/irq.c1
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c2
-rw-r--r--arch/arm/mach-orion5x/net2big-setup.c1
-rw-r--r--arch/arm/mach-picoxcell/Kconfig14
-rw-r--r--arch/arm/mach-picoxcell/Makefile.boot1
-rw-r--r--arch/arm/mach-picoxcell/common.c13
-rw-r--r--arch/arm/mach-picoxcell/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-picoxcell/include/mach/hardware.h21
-rw-r--r--arch/arm/mach-picoxcell/include/mach/map.h25
-rw-r--r--arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h25
-rw-r--r--arch/arm/mach-picoxcell/include/mach/timex.h25
-rw-r--r--arch/arm/mach-picoxcell/include/mach/uncompress.h21
-rw-r--r--arch/arm/mach-prima2/Makefile.boot2
-rw-r--r--arch/arm/mach-pxa/am200epd.c2
-rw-r--r--arch/arm/mach-pxa/am300epd.c2
-rw-r--r--arch/arm/mach-pxa/balloon3.c8
-rw-r--r--arch/arm/mach-pxa/cm-x270.c4
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c2
-rw-r--r--arch/arm/mach-pxa/cm-x300.c10
-rw-r--r--arch/arm/mach-pxa/colibri-evalboard.c4
-rw-r--r--arch/arm/mach-pxa/colibri-pxa270-income.c6
-rw-r--r--arch/arm/mach-pxa/colibri-pxa300.c4
-rw-r--r--arch/arm/mach-pxa/colibri-pxa320.c4
-rw-r--r--arch/arm/mach-pxa/colibri-pxa3xx.c6
-rw-r--r--arch/arm/mach-pxa/corgi.c4
-rw-r--r--arch/arm/mach-pxa/csb726.c4
-rw-r--r--arch/arm/mach-pxa/devices.c31
-rw-r--r--arch/arm/mach-pxa/em-x270.c10
-rw-r--r--arch/arm/mach-pxa/eseries.c4
-rw-r--r--arch/arm/mach-pxa/ezx.c8
-rw-r--r--arch/arm/mach-pxa/gumstix.c2
-rw-r--r--arch/arm/mach-pxa/hx4700.c2
-rw-r--r--arch/arm/mach-pxa/idp.c4
-rw-r--r--arch/arm/mach-pxa/include/mach/arcom-pcmcia.h11
-rw-r--r--arch/arm/mach-pxa/include/mach/camera.h44
-rw-r--r--arch/arm/mach-pxa/include/mach/irda.h25
-rw-r--r--arch/arm/mach-pxa/include/mach/mmc.h28
-rw-r--r--arch/arm/mach-pxa/include/mach/ohci.h36
-rw-r--r--arch/arm/mach-pxa/include/mach/palmasoc.h8
-rw-r--r--arch/arm/mach-pxa/include/mach/pata_pxa.h33
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h35
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa930_rotary.h20
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa930_trkball.h10
-rw-r--r--arch/arm/mach-pxa/include/mach/pxafb.h175
-rw-r--r--arch/arm/mach-pxa/littleton.c8
-rw-r--r--arch/arm/mach-pxa/lpd270.c8
-rw-r--r--arch/arm/mach-pxa/lubbock.c6
-rw-r--r--arch/arm/mach-pxa/magician.c8
-rw-r--r--arch/arm/mach-pxa/mainstone.c10
-rw-r--r--arch/arm/mach-pxa/mioa701.c8
-rw-r--r--arch/arm/mach-pxa/mxm8x10.c8
-rw-r--r--arch/arm/mach-pxa/palm27x.c8
-rw-r--r--arch/arm/mach-pxa/palmld.c10
-rw-r--r--arch/arm/mach-pxa/palmt5.c10
-rw-r--r--arch/arm/mach-pxa/palmtc.c6
-rw-r--r--arch/arm/mach-pxa/palmte2.c8
-rw-r--r--arch/arm/mach-pxa/palmtreo.c14
-rw-r--r--arch/arm/mach-pxa/palmtx.c10
-rw-r--r--arch/arm/mach-pxa/palmz72.c12
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c8
-rw-r--r--arch/arm/mach-pxa/poodle.c6
-rw-r--r--arch/arm/mach-pxa/pxa27x.c2
-rw-r--r--arch/arm/mach-pxa/pxa2xx.c2
-rw-r--r--arch/arm/mach-pxa/pxa3xx-ulpi.c2
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c2
-rw-r--r--arch/arm/mach-pxa/raumfeld.c8
-rw-r--r--arch/arm/mach-pxa/saar.c2
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c30
-rw-r--r--arch/arm/mach-pxa/spitz.c8
-rw-r--r--arch/arm/mach-pxa/stargate2.c2
-rw-r--r--arch/arm/mach-pxa/tavorevb.c4
-rw-r--r--arch/arm/mach-pxa/tosa.c4
-rw-r--r--arch/arm/mach-pxa/trizeps4.c8
-rw-r--r--arch/arm/mach-pxa/viper.c4
-rw-r--r--arch/arm/mach-pxa/vpac270.c8
-rw-r--r--arch/arm/mach-pxa/z2.c6
-rw-r--r--arch/arm/mach-pxa/zeus.c8
-rw-r--r--arch/arm/mach-pxa/zylonite.c10
-rw-r--r--arch/arm/mach-realview/core.h3
-rw-r--r--arch/arm/mach-realview/hotplug.c18
-rw-r--r--arch/arm/mach-realview/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-realview/platsmp.c18
-rw-r--r--arch/arm/mach-realview/realview_pb11mp.c1
-rw-r--r--arch/arm/mach-realview/realview_pbx.c1
-rw-r--r--arch/arm/mach-s3c24xx/common-smdk.c4
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/leds-gpio.h28
-rw-r--r--arch/arm/mach-s3c24xx/mach-amlm5900.c2
-rw-r--r--arch/arm/mach-s3c24xx/mach-anubis.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-at2440evb.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-bast.c8
-rw-r--r--arch/arm/mach-s3c24xx/mach-gta02.c10
-rw-r--r--arch/arm/mach-s3c24xx/mach-h1940.c8
-rw-r--r--arch/arm/mach-s3c24xx/mach-jive.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-mini2440.c10
-rw-r--r--arch/arm/mach-s3c24xx/mach-n30.c8
-rw-r--r--arch/arm/mach-s3c24xx/mach-nexcoder.c2
-rw-r--r--arch/arm/mach-s3c24xx/mach-osiris.c4
-rw-r--r--arch/arm/mach-s3c24xx/mach-otom.c2
-rw-r--r--arch/arm/mach-s3c24xx/mach-qt2410.c8
-rw-r--r--arch/arm/mach-s3c24xx/mach-rx1950.c10
-rw-r--r--arch/arm/mach-s3c24xx/mach-rx3715.c2
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2410.c2
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2413.c4
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2416.c8
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2440.c2
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2443.c2
-rw-r--r--arch/arm/mach-s3c24xx/mach-tct_hammer.c2
-rw-r--r--arch/arm/mach-s3c24xx/mach-vr1000.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-vstms.c4
-rw-r--r--arch/arm/mach-s3c24xx/setup-i2c.c2
-rw-r--r--arch/arm/mach-s3c24xx/simtec-audio.c2
-rw-r--r--arch/arm/mach-s3c24xx/simtec-usb.c2
-rw-r--r--arch/arm/mach-s3c64xx/dev-audio.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-anw6410.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410-module.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-hmt.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-mini6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-ncp.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-real6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-smartq.c8
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6400.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c6
-rw-r--r--arch/arm/mach-s3c64xx/setup-i2c0.c2
-rw-r--r--arch/arm/mach-s3c64xx/setup-i2c1.c2
-rw-r--r--arch/arm/mach-s3c64xx/setup-ide.c2
-rw-r--r--arch/arm/mach-s5p64x0/dev-audio.c2
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6440.c4
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6450.c4
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c0.c2
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c1.c2
-rw-r--r--arch/arm/mach-s5pc100/dev-audio.c2
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c8
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c0.c2
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c1.c2
-rw-r--r--arch/arm/mach-s5pv210/dev-audio.c2
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c2
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkc110.c4
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c6
-rw-r--r--arch/arm/mach-s5pv210/mach-torbreck.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c0.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c1.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c2.c2
-rw-r--r--arch/arm/mach-sa1100/assabet.c2
-rw-r--r--arch/arm/mach-sa1100/cerf.c2
-rw-r--r--arch/arm/mach-sa1100/collie.c2
-rw-r--r--arch/arm/mach-sa1100/include/mach/mcp.h22
-rw-r--r--arch/arm/mach-sa1100/lart.c2
-rw-r--r--arch/arm/mach-sa1100/shannon.c2
-rw-r--r--arch/arm/mach-sa1100/simpad.c2
-rw-r--r--arch/arm/mach-shmobile/Makefile.boot4
-rw-r--r--arch/arm/mach-shmobile/board-ag5evm.c1
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c2
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c2
-rw-r--r--arch/arm/mach-shmobile/board-g4evm.c2
-rw-r--r--arch/arm/mach-shmobile/board-kota2.c1
-rw-r--r--arch/arm/mach-shmobile/board-kzm9d.c1
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g.c1
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c2
-rw-r--r--arch/arm/mach-shmobile/board-marzen.c1
-rw-r--r--arch/arm/mach-shmobile/hotplug.c31
-rw-r--r--arch/arm/mach-shmobile/include/mach/common.h24
-rw-r--r--arch/arm/mach-shmobile/include/mach/emev2.h7
-rw-r--r--arch/arm/mach-shmobile/include/mach/r8a7779.h2
-rw-r--r--arch/arm/mach-shmobile/include/mach/sh73a0.h2
-rw-r--r--arch/arm/mach-shmobile/pfc-r8a7740.c2
-rw-r--r--arch/arm/mach-shmobile/pfc-r8a7779.c2
-rw-r--r--arch/arm/mach-shmobile/pfc-sh7367.c2
-rw-r--r--arch/arm/mach-shmobile/pfc-sh7372.c2
-rw-r--r--arch/arm/mach-shmobile/pfc-sh7377.c2
-rw-r--r--arch/arm/mach-shmobile/pfc-sh73a0.c2
-rw-r--r--arch/arm/mach-shmobile/platsmp.c96
-rw-r--r--arch/arm/mach-shmobile/setup-emev2.c1
-rw-r--r--arch/arm/mach-shmobile/sh-gpio.h (renamed from arch/arm/mach-shmobile/include/mach/gpio.h)14
-rw-r--r--arch/arm/mach-shmobile/smp-emev2.c47
-rw-r--r--arch/arm/mach-shmobile/smp-r8a7779.c48
-rw-r--r--arch/arm/mach-shmobile/smp-sh73a0.c48
-rw-r--r--arch/arm/mach-socfpga/Kconfig16
-rw-r--r--arch/arm/mach-socfpga/Makefile.boot1
-rw-r--r--arch/arm/mach-socfpga/include/mach/timex.h19
-rw-r--r--arch/arm/mach-socfpga/include/mach/uncompress.h9
-rw-r--r--arch/arm/mach-spear13xx/Makefile.boot3
-rw-r--r--arch/arm/mach-spear13xx/hotplug.c22
-rw-r--r--arch/arm/mach-spear13xx/include/mach/generic.h3
-rw-r--r--arch/arm/mach-spear13xx/include/mach/gpio.h19
-rw-r--r--arch/arm/mach-spear13xx/platsmp.c25
-rw-r--r--arch/arm/mach-spear13xx/spear1310.c1
-rw-r--r--arch/arm/mach-spear13xx/spear1340.c1
-rw-r--r--arch/arm/mach-spear3xx/Makefile.boot4
-rw-r--r--arch/arm/mach-spear3xx/include/mach/gpio.h19
-rw-r--r--arch/arm/mach-spear6xx/Makefile.boot2
-rw-r--r--arch/arm/mach-spear6xx/include/mach/gpio.h19
-rw-r--r--arch/arm/mach-tegra/Makefile.boot12
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra20.c2
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra30.c2
-rw-r--r--arch/arm/mach-tegra/board-paz00.c2
-rw-r--r--arch/arm/mach-tegra/common.c1
-rw-r--r--arch/arm/mach-tegra/common.h4
-rw-r--r--arch/arm/mach-tegra/hotplug.c9
-rw-r--r--arch/arm/mach-tegra/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-tegra/include/mach/sdhci.h30
-rw-r--r--arch/arm/mach-tegra/platsmp.c21
-rw-r--r--arch/arm/mach-u300/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-ux500/Makefile.boot2
-rw-r--r--arch/arm/mach-ux500/board-mop500.c6
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c2
-rw-r--r--arch/arm/mach-ux500/devices-common.h2
-rw-r--r--arch/arm/mach-ux500/hotplug.c36
-rw-r--r--arch/arm/mach-ux500/include/mach/crypto-ux500.h22
-rw-r--r--arch/arm/mach-ux500/include/mach/gpio.h5
-rw-r--r--arch/arm/mach-ux500/include/mach/setup.h3
-rw-r--r--arch/arm/mach-ux500/include/mach/usb.h25
-rw-r--r--arch/arm/mach-ux500/platsmp.c24
-rw-r--r--arch/arm/mach-ux500/usb.c2
-rw-r--r--arch/arm/mach-versatile/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-vexpress/Kconfig64
-rw-r--r--arch/arm/mach-vexpress/Makefile2
-rw-r--r--arch/arm/mach-vexpress/Makefile.boot10
-rw-r--r--arch/arm/mach-vexpress/core.h4
-rw-r--r--arch/arm/mach-vexpress/ct-ca9x4.c1
-rw-r--r--arch/arm/mach-vexpress/hotplug.c18
-rw-r--r--arch/arm/mach-vexpress/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-vexpress/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-vexpress/include/mach/timex.h23
-rw-r--r--arch/arm/mach-vexpress/include/mach/uncompress.h86
-rw-r--r--arch/arm/mach-vexpress/platsmp.c18
-rw-r--r--arch/arm/mach-vexpress/v2m.c8
-rw-r--r--arch/arm/mach-vt8500/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-vt8500/include/mach/vt8500fb.h31
-rw-r--r--arch/arm/mach-w90x900/dev.c6
-rw-r--r--arch/arm/mach-w90x900/include/mach/fb.h83
-rw-r--r--arch/arm/mach-w90x900/include/mach/i2c.h9
-rw-r--r--arch/arm/mach-w90x900/include/mach/nuc900_spi.h35
-rw-r--r--arch/arm/mach-w90x900/include/mach/w90p910_keypad.h15
-rw-r--r--arch/arm/mach-w90x900/mach-nuc950evb.c2
-rw-r--r--arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c2
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/devices-common.h32
-rw-r--r--arch/arm/plat-mxc/include/mach/dma.h67
-rw-r--r--arch/arm/plat-mxc/include/mach/esdhc.h43
-rw-r--r--arch/arm/plat-mxc/include/mach/gpio.h1
-rw-r--r--arch/arm/plat-mxc/include/mach/i2c.h21
-rw-r--r--arch/arm/plat-mxc/include/mach/imx-uart.h35
-rw-r--r--arch/arm/plat-mxc/include/mach/imxfb.h84
-rw-r--r--arch/arm/plat-mxc/include/mach/mmc.h39
-rw-r--r--arch/arm/plat-mxc/include/mach/mx1_camera.h35
-rw-r--r--arch/arm/plat-mxc/include/mach/mx21-usbhost.h38
-rw-r--r--arch/arm/plat-mxc/include/mach/mx2_cam.h44
-rw-r--r--arch/arm/plat-mxc/include/mach/mx3_camera.h48
-rw-r--r--arch/arm/plat-mxc/include/mach/mx3fb.h53
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc_ehci.h59
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc_nand.h32
-rw-r--r--arch/arm/plat-mxc/include/mach/sdma.h59
-rw-r--r--arch/arm/plat-mxc/include/mach/spi.h27
-rw-r--r--arch/arm/plat-mxc/include/mach/ssi.h21
-rw-r--r--arch/arm/plat-mxc/include/mach/usb.h23
-rw-r--r--arch/arm/plat-mxc/ssi-fiq-ksym.c2
-rw-r--r--arch/arm/plat-nomadik/include/plat/ske.h50
-rw-r--r--arch/arm/plat-orion/common.c4
-rw-r--r--arch/arm/plat-orion/gpio.c2
-rw-r--r--arch/arm/plat-orion/include/plat/audio.h7
-rw-r--r--arch/arm/plat-orion/include/plat/ehci-orion.h26
-rw-r--r--arch/arm/plat-orion/include/plat/mv_xor.h24
-rw-r--r--arch/arm/plat-orion/include/plat/mvsdio.h20
-rw-r--r--arch/arm/plat-orion/include/plat/orion-gpio.h (renamed from arch/arm/plat-orion/include/plat/gpio.h)2
-rw-r--r--arch/arm/plat-orion/include/plat/orion_nand.h26
-rw-r--r--arch/arm/plat-orion/irq.c2
-rw-r--r--arch/arm/plat-orion/mpp.c1
-rw-r--r--arch/arm/plat-pxa/include/plat/pxa27x_keypad.h73
-rw-r--r--arch/arm/plat-pxa/include/plat/pxa3xx_nand.h79
-rw-r--r--arch/arm/plat-samsung/devs.c20
-rw-r--r--arch/arm/plat-samsung/include/plat/ata.h36
-rw-r--r--arch/arm/plat-samsung/include/plat/audio-simtec.h34
-rw-r--r--arch/arm/plat-samsung/include/plat/audio.h59
-rw-r--r--arch/arm/plat-samsung/include/plat/ehci.h21
-rw-r--r--arch/arm/plat-samsung/include/plat/hwmon.h51
-rw-r--r--arch/arm/plat-samsung/include/plat/iic.h77
-rw-r--r--arch/arm/plat-samsung/include/plat/mci.h52
-rw-r--r--arch/arm/plat-samsung/include/plat/mipi_csis.h43
-rw-r--r--arch/arm/plat-samsung/include/plat/nand.h67
-rw-r--r--arch/arm/plat-samsung/include/plat/s3c64xx-spi.h68
-rw-r--r--arch/arm/plat-samsung/include/plat/ts.h25
-rw-r--r--arch/arm/plat-samsung/include/plat/udc.h44
-rw-r--r--arch/arm/plat-samsung/include/plat/usb-control.h43
-rw-r--r--arch/arm/plat-spear/include/plat/gpio.h1
-rw-r--r--arch/arm/plat-spear/include/plat/keyboard.h164
-rw-r--r--arch/arm/plat-versatile/Makefile2
-rw-r--r--arch/arm/plat-versatile/include/plat/platsmp.h14
-rw-r--r--arch/arm/plat-versatile/platsmp.c10
473 files changed, 1625 insertions, 5296 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2201ff3002a7..9d72ed67e432 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -202,6 +202,13 @@ config ARM_PATCH_PHYS_VIRT
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
+config NEED_MACH_GPIO_H
+ bool
+ help
+ Select this when mach/gpio.h is required to provide special
+ definitions for this platform. The need for mach/gpio.h should
+ be avoided when possible.
+
config NEED_MACH_IO_H
bool
help
@@ -247,26 +254,17 @@ config MMU
#
choice
prompt "ARM system type"
- default ARCH_VERSATILE
+ default ARCH_MULTIPLATFORM
-config ARCH_SOCFPGA
- bool "Altera SOCFPGA family"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_AMBA
- select ARM_GIC
- select CACHE_L2X0
- select CLKDEV_LOOKUP
+config ARCH_MULTIPLATFORM
+ bool "Allow multiple platforms to be selected"
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR
select COMMON_CLK
- select CPU_V7
- select DW_APB_TIMER
- select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
- select GPIO_PL061 if GPIOLIB
- select HAVE_ARM_SCU
+ select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
- help
- This enables support for Altera SOCFPGA Cyclone V platform
+ depends on MMU
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
@@ -318,30 +316,13 @@ config ARCH_VERSATILE
help
This enables support for ARM Ltd Versatile board.
-config ARCH_VEXPRESS
- bool "ARM Ltd. Versatile Express family"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_AMBA
- select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- select HAVE_PATA_PLATFORM
- select ICST
- select NO_IOPORT
- select PLAT_VERSATILE
- select PLAT_VERSATILE_CLCD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- This enables support for the ARM Ltd Versatile Express boards.
-
config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select CLKDEV_LOOKUP
select IRQ_DOMAIN
+ select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
help
This enables support for systems based on Atmel
@@ -364,24 +345,6 @@ config ARCH_BCM2835
This enables support for the Broadcom BCM2835 SoC. This SoC is
use in the Raspberry Pi, and Roku 2 devices.
-config ARCH_HIGHBANK
- bool "Calxeda Highbank-based"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_AMBA
- select ARM_GIC
- select ARM_TIMER_SP804
- select CACHE_L2X0
- select CLKDEV_LOOKUP
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU
- select HAVE_SMP
- select SPARSE_IRQ
- select USE_OF
- help
- Support for the Calxeda Highbank SoC based boards.
-
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select CPU_ARM720T
@@ -526,6 +489,8 @@ config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_MACH_GPIO_H
+ select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
@@ -538,6 +503,8 @@ config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_MACH_GPIO_H
+ select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
@@ -559,18 +526,6 @@ config ARCH_IXP4XX
help
Support for Intel's IXP4XX (XScale) family of processors.
-config ARCH_MVEBU
- bool "Marvell SOCs with Device Tree support"
- select GENERIC_CLOCKEVENTS
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
- select CLKSRC_MMIO
- select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
- select COMMON_CLK
- help
- Support for the Marvell SoC Family with device tree support
-
config ARCH_DOVE
bool "Marvell Dove"
select CPU_V7
@@ -642,6 +597,7 @@ config ARCH_MMP
select PLAT_PXA
select SPARSE_IRQ
select GENERIC_ALLOCATOR
+ select NEED_MACH_GPIO_H
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
@@ -688,25 +644,6 @@ config ARCH_TEGRA
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
-config ARCH_PICOXCELL
- bool "Picochip picoXcell"
- select ARCH_REQUIRE_GPIOLIB
- select ARM_PATCH_PHYS_VIRT
- select ARM_VIC
- select CPU_V6K
- select DW_APB_TIMER
- select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
- select HAVE_TCM
- select NO_IOPORT
- select SPARSE_IRQ
- select USE_OF
- help
- This enables support for systems based on the Picochip picoXcell
- family of Femtocell devices. The picoxcell support requires device tree
- for all boards.
-
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
@@ -723,6 +660,7 @@ config ARCH_PXA
select MULTI_IRQ_HANDLER
select ARM_CPU_SUSPEND if PM
select HAVE_IDE
+ select NEED_MACH_GPIO_H
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
@@ -785,6 +723,7 @@ config ARCH_SA1100
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
+ select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
help
@@ -800,6 +739,7 @@ config ARCH_S3C24XX
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
help
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
@@ -827,6 +767,7 @@ config ARCH_S3C64XX
select SAMSUNG_GPIOLIB_4BIT
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
help
Samsung S3C64XX series based systems
@@ -841,6 +782,7 @@ config ARCH_S5P64X0
select GENERIC_CLOCKEVENTS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
+ select NEED_MACH_GPIO_H
help
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
@@ -855,6 +797,7 @@ config ARCH_S5PC100
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
help
Samsung S5PC100 series based systems
@@ -872,6 +815,7 @@ config ARCH_S5PV210
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
Samsung S5PV210/S5PC110 series based systems
@@ -889,6 +833,7 @@ config ARCH_EXYNOS
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
@@ -961,6 +906,7 @@ config ARCH_DAVINCI
select GENERIC_ALLOCATOR
select GENERIC_IRQ_CHIP
select ARCH_HAS_HOLES_MEMORYMODEL
+ select NEED_MACH_GPIO_H
help
Support for TI's DaVinci platform.
@@ -973,6 +919,7 @@ config ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select ARCH_HAS_HOLES_MEMORYMODEL
+ select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
@@ -1016,6 +963,50 @@ config ARCH_ZYNQ
Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice
+menu "Multiple platform selection"
+ depends on ARCH_MULTIPLATFORM
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+ bool "ARMv4 based platforms (FA526, StrongARM)"
+ select ARCH_MULTI_V4_V5
+ depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4T
+ bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+ select ARCH_MULTI_V4_V5
+ depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V5
+ bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+ select ARCH_MULTI_V4_V5
+ depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4_V5
+ bool
+
+config ARCH_MULTI_V6
+ bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+ select CPU_V6
+ select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V7
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+ select CPU_V7
+ select ARCH_VEXPRESS
+ default y
+ select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V6_V7
+ bool
+
+config ARCH_MULTI_CPU_AUTO
+ def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+ select ARCH_MULTI_V5
+
+endmenu
+
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the
@@ -1041,6 +1032,8 @@ source "arch/arm/mach-gemini/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-highbank/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
@@ -1076,6 +1069,8 @@ source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
+source "arch/arm/mach-picoxcell/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/plat-pxa/Kconfig"
@@ -1088,6 +1083,8 @@ source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
+source "arch/arm/mach-socfpga/Kconfig"
+
source "arch/arm/plat-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
@@ -1994,7 +1991,7 @@ endchoice
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
- depends on !ZBOOT_ROM && !ARM_LPAE
+ depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 58c74e737f7a..b0f3857b3a4c 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -275,6 +275,20 @@ choice
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
+ config DEBUG_MVEBU_UART
+ bool "Kernel low-level debugging messages via MVEBU UART"
+ depends on ARCH_MVEBU
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MVEBU based platforms.
+
+ config DEBUG_PICOXCELL_UART
+ depends on ARCH_PICOXCELL
+ bool "Use PicoXcell UART for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on PicoXcell based platforms.
+
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
depends on ARCH_REALVIEW
@@ -324,6 +338,13 @@ choice
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ config DEBUG_SOCFPGA_UART
+ depends on ARCH_SOCFPGA
+ bool "Use SOCFPGA UART for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SOCFPGA based platforms.
+
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -352,6 +373,7 @@ choice
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
+ depends on !ARCH_MULTIPLATFORM
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
@@ -387,6 +409,17 @@ choice
endchoice
+config DEBUG_LL_INCLUDE
+ string
+ default "debug/icedcc.S" if DEBUG_ICEDCC
+ default "debug/highbank.S" if DEBUG_HIGHBANK_UART
+ default "debug/mvebu.S" if DEBUG_MVEBU_UART
+ default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
+ default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+ default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
+ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+ default "mach/debug-macro.S"
+
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a2eb4fe068b9..770da51242c4 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -135,83 +135,78 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-machine-$(CONFIG_ARCH_AT91) := at91
-machine-$(CONFIG_ARCH_BCM2835) := bcm2835
-machine-$(CONFIG_ARCH_CLPS711X) := clps711x
-machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx
-machine-$(CONFIG_ARCH_DAVINCI) := davinci
-machine-$(CONFIG_ARCH_DOVE) := dove
-machine-$(CONFIG_ARCH_EBSA110) := ebsa110
-machine-$(CONFIG_ARCH_EP93XX) := ep93xx
-machine-$(CONFIG_ARCH_GEMINI) := gemini
-machine-$(CONFIG_ARCH_H720X) := h720x
-machine-$(CONFIG_ARCH_HIGHBANK) := highbank
-machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
-machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
-machine-$(CONFIG_ARCH_IOP32X) := iop32x
-machine-$(CONFIG_ARCH_IOP33X) := iop33x
-machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
-machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
-machine-$(CONFIG_ARCH_KS8695) := ks8695
-machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx
-machine-$(CONFIG_ARCH_MMP) := mmp
-machine-$(CONFIG_ARCH_MSM) := msm
-machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
-machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
-machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
-machine-$(CONFIG_ARCH_MXS) := mxs
-machine-$(CONFIG_ARCH_MVEBU) := mvebu
-machine-$(CONFIG_ARCH_NETX) := netx
-machine-$(CONFIG_ARCH_NOMADIK) := nomadik
-machine-$(CONFIG_ARCH_OMAP1) := omap1
-machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2
-machine-$(CONFIG_ARCH_ORION5X) := orion5x
-machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
-machine-$(CONFIG_ARCH_PRIMA2) := prima2
-machine-$(CONFIG_ARCH_PXA) := pxa
-machine-$(CONFIG_ARCH_REALVIEW) := realview
-machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2440
-machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
-machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
-machine-$(CONFIG_ARCH_S5PC100) := s5pc100
-machine-$(CONFIG_ARCH_S5PV210) := s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4) := exynos
-machine-$(CONFIG_ARCH_EXYNOS5) := exynos
-machine-$(CONFIG_ARCH_SA1100) := sa1100
-machine-$(CONFIG_ARCH_SHARK) := shark
-machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
-machine-$(CONFIG_ARCH_TEGRA) := tegra
-machine-$(CONFIG_ARCH_U300) := u300
-machine-$(CONFIG_ARCH_U8500) := ux500
-machine-$(CONFIG_ARCH_VERSATILE) := versatile
-machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
-machine-$(CONFIG_ARCH_VT8500) := vt8500
-machine-$(CONFIG_ARCH_W90X900) := w90x900
-machine-$(CONFIG_FOOTBRIDGE) := footbridge
-machine-$(CONFIG_ARCH_SOCFPGA) := socfpga
-machine-$(CONFIG_MACH_SPEAR1310) := spear13xx
-machine-$(CONFIG_MACH_SPEAR1340) := spear13xx
-machine-$(CONFIG_MACH_SPEAR300) := spear3xx
-machine-$(CONFIG_MACH_SPEAR310) := spear3xx
-machine-$(CONFIG_MACH_SPEAR320) := spear3xx
-machine-$(CONFIG_MACH_SPEAR600) := spear6xx
-machine-$(CONFIG_ARCH_ZYNQ) := zynq
+machine-$(CONFIG_ARCH_AT91) += at91
+machine-$(CONFIG_ARCH_BCM2835) += bcm2835
+machine-$(CONFIG_ARCH_CLPS711X) += clps711x
+machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
+machine-$(CONFIG_ARCH_DAVINCI) += davinci
+machine-$(CONFIG_ARCH_DOVE) += dove
+machine-$(CONFIG_ARCH_EBSA110) += ebsa110
+machine-$(CONFIG_ARCH_EP93XX) += ep93xx
+machine-$(CONFIG_ARCH_GEMINI) += gemini
+machine-$(CONFIG_ARCH_H720X) += h720x
+machine-$(CONFIG_ARCH_HIGHBANK) += highbank
+machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
+machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
+machine-$(CONFIG_ARCH_IOP32X) += iop32x
+machine-$(CONFIG_ARCH_IOP33X) += iop33x
+machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
+machine-$(CONFIG_ARCH_KS8695) += ks8695
+machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
+machine-$(CONFIG_ARCH_MMP) += mmp
+machine-$(CONFIG_ARCH_MSM) += msm
+machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
+machine-$(CONFIG_ARCH_MXC) += imx
+machine-$(CONFIG_ARCH_MXS) += mxs
+machine-$(CONFIG_ARCH_MVEBU) += mvebu
+machine-$(CONFIG_ARCH_NETX) += netx
+machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+machine-$(CONFIG_ARCH_OMAP1) += omap1
+machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
+machine-$(CONFIG_ARCH_ORION5X) += orion5x
+machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
+machine-$(CONFIG_ARCH_PRIMA2) += prima2
+machine-$(CONFIG_ARCH_PXA) += pxa
+machine-$(CONFIG_ARCH_REALVIEW) += realview
+machine-$(CONFIG_ARCH_RPC) += rpc
+machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
+machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
+machine-$(CONFIG_ARCH_S5PC100) += s5pc100
+machine-$(CONFIG_ARCH_S5PV210) += s5pv210
+machine-$(CONFIG_ARCH_EXYNOS) += exynos
+machine-$(CONFIG_ARCH_SA1100) += sa1100
+machine-$(CONFIG_ARCH_SHARK) += shark
+machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
+machine-$(CONFIG_ARCH_TEGRA) += tegra
+machine-$(CONFIG_ARCH_U300) += u300
+machine-$(CONFIG_ARCH_U8500) += ux500
+machine-$(CONFIG_ARCH_VERSATILE) += versatile
+machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
+machine-$(CONFIG_ARCH_VT8500) += vt8500
+machine-$(CONFIG_ARCH_W90X900) += w90x900
+machine-$(CONFIG_FOOTBRIDGE) += footbridge
+machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
+machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx
+machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx
+machine-$(CONFIG_MACH_SPEAR600) += spear6xx
+machine-$(CONFIG_ARCH_ZYNQ) += zynq
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC) := mxc
-plat-$(CONFIG_ARCH_OMAP) := omap
-plat-$(CONFIG_ARCH_S3C64XX) := samsung
-plat-$(CONFIG_ARCH_ZYNQ) := versatile
-plat-$(CONFIG_PLAT_IOP) := iop
-plat-$(CONFIG_PLAT_NOMADIK) := nomadik
-plat-$(CONFIG_PLAT_ORION) := orion
-plat-$(CONFIG_PLAT_PXA) := pxa
-plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P) := samsung
-plat-$(CONFIG_PLAT_SPEAR) := spear
-plat-$(CONFIG_PLAT_VERSATILE) := versatile
+plat-$(CONFIG_ARCH_MXC) += mxc
+plat-$(CONFIG_ARCH_OMAP) += omap
+plat-$(CONFIG_ARCH_S3C64XX) += samsung
+plat-$(CONFIG_ARCH_ZYNQ) += versatile
+plat-$(CONFIG_PLAT_IOP) += iop
+plat-$(CONFIG_PLAT_NOMADIK) += nomadik
+plat-$(CONFIG_PLAT_ORION) += orion
+plat-$(CONFIG_PLAT_PXA) += pxa
+plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung
+plat-$(CONFIG_PLAT_S5P) += samsung
+plat-$(CONFIG_PLAT_SPEAR) += spear
+plat-$(CONFIG_PLAT_VERSATILE) += versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
@@ -229,15 +224,20 @@ MACHINE := arch/arm/mach-$(word 1,$(machine-y))/
else
MACHINE :=
endif
+ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+MACHINE :=
+endif
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
+ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
else
KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
endif
+endif
export TEXT_OFFSET GZFLAGS MMUEXT
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index c877087d2000..3fdab016aa5c 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -15,6 +15,8 @@ ifneq ($(MACHINE),)
include $(srctree)/$(MACHINE)/Makefile.boot
endif
+include $(srctree)/arch/arm/boot/dts/Makefile
+
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 8e2a8fca5ed2..df899834d84e 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -25,7 +25,13 @@ unsigned int __machine_arch_type;
static void putstr(const char *ptr);
extern void error(char *x);
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+static inline void putc(int c) {}
+static inline void flush(void) {}
+static inline void arch_decomp_setup(void) {}
+#else
#include <mach/uncompress.h>
+#endif
#ifdef CONFIG_DEBUG_ICEDCC
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
new file mode 100644
index 000000000000..43c084c2cd66
--- /dev/null
+++ b/arch/arm/boot/dts/Makefile
@@ -0,0 +1,101 @@
+ifeq ($(CONFIG_OF),y)
+
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
+ at91sam9263ek.dtb \
+ at91sam9g20ek_2mmc.dtb \
+ at91sam9g20ek.dtb \
+ at91sam9g25ek.dtb \
+ at91sam9m10g45ek.dtb \
+ at91sam9n12ek.dtb \
+ ethernut5.dtb \
+ evk-pro3.dtb \
+ kizbox.dtb \
+ tny_a9260.dtb \
+ tny_a9263.dtb \
+ tny_a9g20.dtb \
+ usb_a9260.dtb \
+ usb_a9263.dtb \
+ usb_a9g20.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
+ exynos4210-smdkv310.dtb \
+ exynos4210-trats.dtb \
+ exynos5250-smdk5250.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \
+ imx53-ard.dtb \
+ imx53-evk.dtb \
+ imx53-qsb.dtb \
+ imx53-smd.dtb
+dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
+ kirkwood-dns325.dtb \
+ kirkwood-dreamplug.dtb \
+ kirkwood-goflexnet.dtb \
+ kirkwood-ib62x0.dtb \
+ kirkwood-iconnect.dtb \
+ kirkwood-lschlv2.dtb \
+ kirkwood-lsxhl.dtb \
+ kirkwood-ts219-6281.dtb \
+ kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
+ msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
+ armada-xp-db.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+ imx53-ard.dtb \
+ imx53-evk.dtb \
+ imx53-qsb.dtb \
+ imx53-smd.dtb \
+ imx6q-arm2.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+ imx23-olinuxino.dtb \
+ imx23-stmp378x_devb.dtb \
+ imx28-apx4devkit.dtb \
+ imx28-cfa10036.dtb \
+ imx28-cfa10049.dtb \
+ imx28-evk.dtb \
+ imx28-m28evk.dtb \
+ imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+ omap3-beagle-xm.dtb \
+ omap3-evm.dtb \
+ omap3-tobi.dtb \
+ omap4-panda.dtb \
+ omap4-pandaES.dtb \
+ omap4-var_som.dtb \
+ omap4-sdp.dtb \
+ omap5-evm.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+ r8a7740-armadillo800eva.dtb \
+ sh73a0-kzm9g.dtb
+dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
+ spear1340-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
+ spear310-evb.dtb \
+ spear320-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+ tegra20-medcom-wide.dtb \
+ tegra20-paz00.dtb \
+ tegra20-plutux.dtb \
+ tegra20-seaboard.dtb \
+ tegra20-tec.dtb \
+ tegra20-trimslice.dtb \
+ tegra20-ventana.dtb \
+ tegra20-whistler.dtb \
+ tegra30-cardhu-a02.dtb \
+ tegra30-cardhu-a04.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+ vexpress-v2p-ca9.dtb \
+ vexpress-v2p-ca15-tc1.dtb \
+ vexpress-v2p-ca15_a7.dtb
+
+endif
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
new file mode 100644
index 000000000000..159f75fc4377
--- /dev/null
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -0,0 +1,57 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_SOCFPGA=y
+# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_SMP=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_ATA=y
+CONFIG_SATA_HIGHBANK=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_SI=y
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIOLIB=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_HIGHBANK_MC=y
+CONFIG_EDAC_HIGHBANK_L2=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index c402e9b31f4c..477e0206e016 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -6,7 +6,9 @@
#endif
/* not all ARM platforms necessarily support this API ... */
+#ifdef CONFIG_NEED_MACH_GPIO_H
#include <mach/gpio.h>
+#endif
#ifndef __ARM_GPIOLIB_COMPLEX
/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 0b1c94b8c652..917d4fcfd9b4 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -14,6 +14,12 @@ struct tag;
struct meminfo;
struct sys_timer;
struct pt_regs;
+struct smp_operations;
+#ifdef CONFIG_SMP
+#define smp_ops(ops) (&(ops))
+#else
+#define smp_ops(ops) (struct smp_operations *)NULL
+#endif
struct machine_desc {
unsigned int nr; /* architecture number */
@@ -35,6 +41,7 @@ struct machine_desc {
unsigned char reserve_lp1 :1; /* never has lp1 */
unsigned char reserve_lp2 :1; /* never has lp2 */
char restart_mode; /* default restart mode */
+ struct smp_operations *smp; /* SMP operations */
void (*fixup)(struct tag *, char **,
struct meminfo *);
void (*reserve)(void);/* reserve mem blocks */
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index ae29293270a3..2e3be16c6766 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -60,15 +60,6 @@ extern int boot_secondary(unsigned int cpu, struct task_struct *);
*/
asmlinkage void secondary_start_kernel(void);
-/*
- * Perform platform specific initialisation of the specified CPU.
- */
-extern void platform_secondary_init(unsigned int cpu);
-
-/*
- * Initialize cpu_possible map, and enable coherency
- */
-extern void platform_smp_prepare_cpus(unsigned int);
/*
* Initial data for bringing up a secondary CPU.
@@ -79,18 +70,47 @@ struct secondary_data {
void *stack;
};
extern struct secondary_data secondary_data;
+extern volatile int pen_release;
extern int __cpu_disable(void);
-extern int platform_cpu_disable(unsigned int cpu);
extern void __cpu_die(unsigned int cpu);
extern void cpu_die(void);
-extern void platform_cpu_die(unsigned int cpu);
-extern int platform_cpu_kill(unsigned int cpu);
-extern void platform_cpu_enable(unsigned int cpu);
-
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+struct smp_operations {
+#ifdef CONFIG_SMP
+ /*
+ * Setup the set of possible CPUs (via set_cpu_possible)
+ */
+ void (*smp_init_cpus)(void);
+ /*
+ * Initialize cpu_possible map, and enable coherency
+ */
+ void (*smp_prepare_cpus)(unsigned int max_cpus);
+
+ /*
+ * Perform platform specific initialisation of the specified CPU.
+ */
+ void (*smp_secondary_init)(unsigned int cpu);
+ /*
+ * Boot a secondary CPU, and assign it the specified idle task.
+ * This also gives us the initial stack to use for this CPU.
+ */
+ int (*smp_boot_secondary)(unsigned int cpu, struct task_struct *idle);
+#ifdef CONFIG_HOTPLUG_CPU
+ int (*cpu_kill)(unsigned int cpu);
+ void (*cpu_die)(unsigned int cpu);
+ int (*cpu_disable)(unsigned int cpu);
+#endif
+#endif
+};
+
+/*
+ * set platform specific SMP operations
+ */
+extern void smp_set_ops(struct smp_operations *);
+
#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index ce119442277c..963342acebb7 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -13,7 +13,11 @@
#define _ASMARM_TIMEX_H
#include <asm/arch_timer.h>
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+#define CLOCK_TICK_RATE 1000000
+#else
#include <mach/timex.h>
+#endif
typedef unsigned long cycles_t;
diff --git a/arch/arm/mach-highbank/include/mach/debug-macro.S b/arch/arm/include/debug/highbank.S
index cb57fe5bcd04..8cad4322a5a2 100644
--- a/arch/arm/mach-highbank/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/highbank.S
@@ -10,10 +10,8 @@
*/
.macro addruart,rp,rv,tmp
- movw \rv, #0x6000
- movt \rv, #0xfee3
- movw \rp, #0x6000
- movt \rp, #0xfff3
+ ldr \rv, =0xfee36000
+ ldr \rp, =0xfff36000
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/include/debug/icedcc.S b/arch/arm/include/debug/icedcc.S
new file mode 100644
index 000000000000..43afcb021fa3
--- /dev/null
+++ b/arch/arm/include/debug/icedcc.S
@@ -0,0 +1,90 @@
+/*
+ * arch/arm/include/debug/icedcc.S
+ *
+ * Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ @@ debug using ARM EmbeddedICE DCC channel
+
+ .macro addruart, rp, rv, tmp
+ .endm
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c0, c5, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c0, c1, 0
+ tst \rx, #0x20000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x2000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c0, c1, 0
+ tst \rx, #0x20000000
+ bne 1001b
+1002:
+ .endm
+
+#elif defined(CONFIG_CPU_XSCALE)
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c8, c0, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x10000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ bne 1001b
+1002:
+ .endm
+
+#else
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c1, c0, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c0, c0, 0
+ tst \rx, #2
+ beq 1001b
+
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x2000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c0, c0, 0
+ tst \rx, #2
+ bne 1001b
+1002:
+ .endm
+
+#endif /* CONFIG_CPU_V6 */
diff --git a/arch/arm/mach-mvebu/include/mach/debug-macro.S b/arch/arm/include/debug/mvebu.S
index 22825760c7e1..865c6d02b332 100644
--- a/arch/arm/mach-mvebu/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/mvebu.S
@@ -11,7 +11,8 @@
* published by the Free Software Foundation.
*/
-#include <mach/armada-370-xp.h>
+#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
+#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
.macro addruart, rp, rv, tmp
ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/include/debug/picoxcell.S
index 58d4ee3ae949..7419deb1b948 100644
--- a/arch/arm/mach-picoxcell/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/picoxcell.S
@@ -9,10 +9,10 @@
* accesses to the 8250.
*/
#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
#define UART_SHIFT 2
+#define PICOXCELL_UART1_BASE 0x80230000
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
.macro addruart, rp, rv, tmp
ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
diff --git a/arch/arm/mach-socfpga/include/mach/debug-macro.S b/arch/arm/include/debug/socfpga.S
index d6f26d23374f..d6f26d23374f 100644
--- a/arch/arm/mach-socfpga/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/socfpga.S
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/include/debug/vexpress.S
index 9f509f55d078..9f509f55d078 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/vexpress.S
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index c45522c36787..66f711b2e0e8 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -20,90 +20,9 @@
* references to these in a production kernel!
*/
-#if defined(CONFIG_DEBUG_ICEDCC)
- @@ debug using ARM EmbeddedICE DCC channel
-
- .macro addruart, rp, rv, tmp
- .endm
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c0, c5, 0
- .endm
-
- .macro busyuart, rd, rx
-1001:
- mrc p14, 0, \rx, c0, c1, 0
- tst \rx, #0x20000000
- beq 1001b
- .endm
-
- .macro waituart, rd, rx
- mov \rd, #0x2000000
-1001:
- subs \rd, \rd, #1
- bmi 1002f
- mrc p14, 0, \rx, c0, c1, 0
- tst \rx, #0x20000000
- bne 1001b
-1002:
- .endm
-
-#elif defined(CONFIG_CPU_XSCALE)
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c8, c0, 0
- .endm
-
- .macro busyuart, rd, rx
-1001:
- mrc p14, 0, \rx, c14, c0, 0
- tst \rx, #0x10000000
- beq 1001b
- .endm
-
- .macro waituart, rd, rx
- mov \rd, #0x10000000
-1001:
- subs \rd, \rd, #1
- bmi 1002f
- mrc p14, 0, \rx, c14, c0, 0
- tst \rx, #0x10000000
- bne 1001b
-1002:
- .endm
-
-#else
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c1, c0, 0
- .endm
-
- .macro busyuart, rd, rx
-1001:
- mrc p14, 0, \rx, c0, c0, 0
- tst \rx, #2
- beq 1001b
-
- .endm
-
- .macro waituart, rd, rx
- mov \rd, #0x2000000
-1001:
- subs \rd, \rd, #1
- bmi 1002f
- mrc p14, 0, \rx, c0, c0, 0
- tst \rx, #2
- bne 1001b
-1002:
- .endm
-
-#endif /* CONFIG_CPU_V6 */
-
-#elif !defined(CONFIG_DEBUG_SEMIHOSTING)
-#include <mach/debug-macro.S>
-#endif /* CONFIG_DEBUG_ICEDCC */
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 3db960e20cb8..9874d0741191 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -23,8 +23,8 @@
#include <asm/thread_info.h>
#include <asm/pgtable.h>
-#ifdef CONFIG_DEBUG_LL
-#include <mach/debug-macro.S>
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
#endif
/*
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index a81dcecc7343..725f9f2a9541 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -977,8 +977,10 @@ void __init setup_arch(char **cmdline_p)
unflatten_device_tree();
#ifdef CONFIG_SMP
- if (is_smp())
+ if (is_smp()) {
+ smp_set_ops(mdesc->smp);
smp_init_cpus();
+ }
#endif
reserve_crashkernel();
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index ebd8ad274d76..aa4ffe6e5ecf 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -19,7 +19,6 @@
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/cpu.h>
-#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
#include <linux/percpu.h>
@@ -27,6 +26,7 @@
#include <linux/completion.h>
#include <linux/atomic.h>
+#include <asm/smp.h>
#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
@@ -42,6 +42,7 @@
#include <asm/ptrace.h>
#include <asm/localtimer.h>
#include <asm/smp_plat.h>
+#include <asm/mach/arch.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
@@ -50,6 +51,12 @@
*/
struct secondary_data secondary_data;
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
enum ipi_msg_type {
IPI_TIMER = 2,
IPI_RESCHEDULE,
@@ -60,6 +67,14 @@ enum ipi_msg_type {
static DECLARE_COMPLETION(cpu_running);
+static struct smp_operations smp_ops;
+
+void __init smp_set_ops(struct smp_operations *ops)
+{
+ if (ops)
+ smp_ops = *ops;
+};
+
int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
@@ -100,13 +115,64 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
return ret;
}
+/* platform specific SMP operations */
+void __init smp_init_cpus(void)
+{
+ if (smp_ops.smp_init_cpus)
+ smp_ops.smp_init_cpus();
+}
+
+static void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ if (smp_ops.smp_prepare_cpus)
+ smp_ops.smp_prepare_cpus(max_cpus);
+}
+
+static void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ if (smp_ops.smp_secondary_init)
+ smp_ops.smp_secondary_init(cpu);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ if (smp_ops.smp_boot_secondary)
+ return smp_ops.smp_boot_secondary(cpu, idle);
+ return -ENOSYS;
+}
+
#ifdef CONFIG_HOTPLUG_CPU
static void percpu_timer_stop(void);
+static int platform_cpu_kill(unsigned int cpu)
+{
+ if (smp_ops.cpu_kill)
+ return smp_ops.cpu_kill(cpu);
+ return 1;
+}
+
+static void platform_cpu_die(unsigned int cpu)
+{
+ if (smp_ops.cpu_die)
+ smp_ops.cpu_die(cpu);
+}
+
+static int platform_cpu_disable(unsigned int cpu)
+{
+ if (smp_ops.cpu_disable)
+ return smp_ops.cpu_disable(cpu);
+
+ /*
+ * By default, allow disabling all CPUs except the first one,
+ * since this is special on a lot of platforms, e.g. because
+ * of clock tick interrupts.
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
/*
* __cpu_disable runs on the processor to be shutdown.
*/
-int __cpu_disable(void)
+int __cpuinit __cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
int ret;
@@ -149,7 +215,7 @@ static DECLARE_COMPLETION(cpu_died);
* called on the thread which is asking for a CPU to be shutdown -
* waits until shutdown has completed, or it is timed out.
*/
-void __cpu_die(unsigned int cpu)
+void __cpuinit __cpu_die(unsigned int cpu)
{
if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
pr_err("CPU%u: cpu didn't die\n", cpu);
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 30bb7332e30b..5309f9b6aabc 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -12,27 +12,3 @@ else
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
-
-# Keep dtb files sorted alphabetically for each SoC
-# sam9260
-dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
-# sam9263
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
-# sam9g20
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
-# sam9g45
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
-# sam9n12
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
-# sam9x5
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 1b47319ca00b..e4c3b3709204 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -31,7 +31,7 @@
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
#include <mach/atmel-mci.h>
#include <media/atmel-isi.h>
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 1fad22f7e21f..deafea0e493d 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -22,7 +22,7 @@
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
deleted file mode 100644
index cab0997be3de..000000000000
--- a/arch/arm/mach-at91/include/mach/at_hdmac.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Header file for the Atmel AHB DMA Controller driver
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef AT_HDMAC_H
-#define AT_HDMAC_H
-
-#include <linux/dmaengine.h>
-
-/**
- * struct at_dma_platform_data - Controller configuration parameters
- * @nr_channels: Number of channels supported by hardware (max 8)
- * @cap_mask: dma_capability flags supported by the platform
- */
-struct at_dma_platform_data {
- unsigned int nr_channels;
- dma_cap_mask_t cap_mask;
-};
-
-/**
- * struct at_dma_slave - Controller-specific information about a slave
- * @dma_dev: required DMA master device
- * @cfg: Platform-specific initializer for the CFG register
- */
-struct at_dma_slave {
- struct device *dma_dev;
- u32 cfg;
-};
-
-
-/* Platform-configurable bits in CFG */
-#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */
-#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */
-#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */
-#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */
-#define ATC_SRC_H2SEL_SW (0x0 << 9)
-#define ATC_SRC_H2SEL_HW (0x1 << 9)
-#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */
-#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */
-#define ATC_DST_H2SEL_SW (0x0 << 13)
-#define ATC_DST_H2SEL_HW (0x1 << 13)
-#define ATC_SOD (0x1 << 16) /* Stop On Done */
-#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */
-#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */
-#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */
-#define ATC_LOCK_IF_L_CHUNK (0x0 << 22)
-#define ATC_LOCK_IF_L_BUFFER (0x1 << 22)
-#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */
-#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */
-#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28)
-#define ATC_FIFOCFG_HALFFIFO (0x1 << 28)
-#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28)
-
-
-#endif /* AT_HDMAC_H */
diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h
index 998cb0c07135..cd580a12e904 100644
--- a/arch/arm/mach-at91/include/mach/atmel-mci.h
+++ b/arch/arm/mach-at91/include/mach/atmel-mci.h
@@ -1,7 +1,7 @@
#ifndef __MACH_ATMEL_MCI_H
#define __MACH_ATMEL_MCI_H
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
/**
* struct mci_dma_data - DMA data for MCI interface
diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot
index 0831fd1764e7..2d30e17f5b69 100644
--- a/arch/arm/mach-bcm2835/Makefile.boot
+++ b/arch/arm/mach-bcm2835/Makefile.boot
@@ -1,5 +1,3 @@
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-y += bcm2835-rpi-b.dtb
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
index 1ce70a91f2e9..f091a9010c2f 100644
--- a/arch/arm/mach-davinci/aemif.c
+++ b/arch/arm/mach-davinci/aemif.c
@@ -15,7 +15,7 @@
#include <linux/module.h>
#include <linux/time.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
/* Timing value configuration */
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 0031864e7f11..95b5e102ceb1 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -28,11 +28,11 @@
#include <mach/cp_intc.h>
#include <mach/mux.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/da8xx.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
#define DA830_EVM_PHY_ID ""
/*
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0149fb453be3..1295e616ceee 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -40,10 +40,10 @@
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/mux.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 1c7b1f46a8f3..88ebea89abdf 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -26,11 +26,11 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 8e7703213b08..2f88103c6459 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -23,11 +23,11 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 688a9c556dc9..1b4a8adcfdc9 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -33,11 +33,11 @@
#include <mach/mux.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
#include <media/tvp514x.h>
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index d34ed55912b2..ca72fc4b8cca 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -31,13 +31,13 @@
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 958679a20e13..9944367b4931 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -38,11 +38,11 @@
#include <mach/common.h>
#include <mach/serial.h>
-#include <mach/i2c.h>
-#include <mach/nand.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/clock.h>
#include <mach/cdce949.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"
#include "clock.h"
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index beecde3a1d2f..43e4a0d663fa 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -26,9 +26,9 @@
#include <mach/common.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/mux.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
#define MITYOMAPL138_PHY_ID ""
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index f6b9fc70161b..144bf31d68dd 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -31,12 +31,12 @@
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 9078acf94bac..6957787fa7f3 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -36,10 +36,10 @@
#include <asm/mach/flash.h>
#include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 8db0fc6809dd..a37fc44e29bc 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -24,7 +24,7 @@
#include <linux/spi/spi.h>
#include <mach/asp.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/keyscan-davinci.h>
#include <mach/hardware.h>
#include <media/davinci/vpfe_capture.h>
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index d2f9666284a7..3a42b6f79aa9 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -15,12 +15,12 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
#include <mach/edma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
#include <mach/time.h>
#include "davinci.h"
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 678cd99b7336..adbde33eca01 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -27,7 +27,7 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a50d49de1883..719e22f2a37e 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -30,8 +30,8 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <mach/spi.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"
diff --git a/arch/arm/mach-davinci/include/mach/aemif.h b/arch/arm/mach-davinci/include/mach/aemif.h
deleted file mode 100644
index 05b293443097..000000000000
--- a/arch/arm/mach-davinci/include/mach/aemif.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * TI DaVinci AEMIF support
- *
- * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _MACH_DAVINCI_AEMIF_H
-#define _MACH_DAVINCI_AEMIF_H
-
-#define NRCSR_OFFSET 0x00
-#define AWCCR_OFFSET 0x04
-#define A1CR_OFFSET 0x10
-
-#define ACR_ASIZE_MASK 0x3
-#define ACR_EW_MASK BIT(30)
-#define ACR_SS_MASK BIT(31)
-
-/* All timings in nanoseconds */
-struct davinci_aemif_timing {
- u8 wsetup;
- u8 wstrobe;
- u8 whold;
-
- u8 rsetup;
- u8 rstrobe;
- u8 rhold;
-
- u8 ta;
-};
-
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
- void __iomem *base, unsigned cs);
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index a2f1f274f189..33e78ae2a254 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -19,12 +19,12 @@
#include <mach/serial.h>
#include <mach/edma.h>
-#include <mach/i2c.h>
#include <mach/asp.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
#include <mach/pm.h>
-#include <mach/spi.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
extern void __iomem *da8xx_syscfg0_base;
extern void __iomem *da8xx_syscfg1_base;
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
deleted file mode 100644
index 2312d197dfb7..000000000000
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * DaVinci I2C controller platform_device info
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-*/
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-/* All frequencies are expressed in kHz */
-struct davinci_i2c_platform_data {
- unsigned int bus_freq; /* standard bus frequency (kHz) */
- unsigned int bus_delay; /* post-transaction delay (usec) */
- unsigned int sda_pin; /* GPIO pin ID to use for SDA */
- unsigned int scl_pin; /* GPIO pin ID to use for SCL */
-};
-
-/* for board setup code */
-void davinci_init_i2c(struct davinci_i2c_platform_data *);
-
-#endif /* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
deleted file mode 100644
index 7a560e05bda8..000000000000
--- a/arch/arm/mach-davinci/include/mach/keyscan.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments, Inc
- *
- * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef DAVINCI_KEYSCAN_H
-#define DAVINCI_KEYSCAN_H
-
-#include <linux/io.h>
-
-enum davinci_matrix_types {
- DAVINCI_KEYSCAN_MATRIX_4X4,
- DAVINCI_KEYSCAN_MATRIX_5X3,
-};
-
-struct davinci_ks_platform_data {
- int (*device_enable)(struct device *dev);
- unsigned short *keymap;
- u32 keymapsize;
- u8 rep:1;
- u8 strobe;
- u8 interval;
- u8 matrix_type;
-};
-
-#endif
-
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
deleted file mode 100644
index 5ba6b22ce338..000000000000
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Board-specific MMC configuration
- */
-
-#ifndef _DAVINCI_MMC_H
-#define _DAVINCI_MMC_H
-
-#include <linux/types.h>
-#include <linux/mmc/host.h>
-
-struct davinci_mmc_config {
- /* get_cd()/get_wp() may sleep */
- int (*get_cd)(int module);
- int (*get_ro)(int module);
-
- void (*set_power)(int module, bool on);
-
- /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
- u8 wires;
-
- u32 max_freq;
-
- /* any additional host capabilities: OR'd in to mmc->f_caps */
- u32 caps;
-
- /* Version of the MMC/SD controller */
- u8 version;
-
- /* Number of sg segments */
- u8 nr_sg;
-};
-void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
-
-enum {
- MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */
- MMC_CTLR_VERSION_2, /* DA830 */
-};
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
deleted file mode 100644
index 1cf555aef896..000000000000
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * mach-davinci/nand.h
- *
- * Copyright © 2006 Texas Instruments.
- *
- * Ported to 2.6.23 Copyright © 2008 by
- * Sander Huijsen <Shuijsen@optelecom-nkf.com>
- * Troy Kisky <troy.kisky@boundarydevices.com>
- * Dirk Behme <Dirk.Behme@gmail.com>
- *
- * --------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_NAND_H
-#define __ARCH_ARM_DAVINCI_NAND_H
-
-#include <linux/mtd/nand.h>
-
-#define NANDFCR_OFFSET 0x60
-#define NANDFSR_OFFSET 0x64
-#define NANDF1ECC_OFFSET 0x70
-
-/* 4-bit ECC syndrome registers */
-#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc
-#define NAND_4BIT_ECC1_OFFSET 0xc0
-#define NAND_4BIT_ECC2_OFFSET 0xc4
-#define NAND_4BIT_ECC3_OFFSET 0xc8
-#define NAND_4BIT_ECC4_OFFSET 0xcc
-#define NAND_ERR_ADD1_OFFSET 0xd0
-#define NAND_ERR_ADD2_OFFSET 0xd4
-#define NAND_ERR_ERRVAL1_OFFSET 0xd8
-#define NAND_ERR_ERRVAL2_OFFSET 0xdc
-
-/* NOTE: boards don't need to use these address bits
- * for ALE/CLE unless they support booting from NAND.
- * They're used unless platform data overrides them.
- */
-#define MASK_ALE 0x08
-#define MASK_CLE 0x10
-
-struct davinci_nand_pdata { /* platform_data */
- uint32_t mask_ale;
- uint32_t mask_cle;
-
- /* for packages using two chipselects */
- uint32_t mask_chipsel;
-
- /* board's default static partition info */
- struct mtd_partition *parts;
- unsigned nr_parts;
-
- /* none == NAND_ECC_NONE (strongly *not* advised!!)
- * soft == NAND_ECC_SOFT
- * else == NAND_ECC_HW, according to ecc_bits
- *
- * All DaVinci-family chips support 1-bit hardware ECC.
- * Newer ones also support 4-bit ECC, but are awkward
- * using it with large page chips.
- */
- nand_ecc_modes_t ecc_mode;
- u8 ecc_bits;
-
- /* e.g. NAND_BUSWIDTH_16 */
- unsigned options;
- /* e.g. NAND_BBT_USE_FLASH */
- unsigned bbt_options;
-
- /* Main and mirror bbt descriptor overrides */
- struct nand_bbt_descr *bbt_td;
- struct nand_bbt_descr *bbt_md;
-
- /* Access timings */
- struct davinci_aemif_timing *timing;
-};
-
-#endif /* __ARCH_ARM_DAVINCI_NAND_H */
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
deleted file mode 100644
index 7af305b37868..000000000000
--- a/arch/arm/mach-davinci/include/mach/spi.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_SPI_H
-#define __ARCH_ARM_DAVINCI_SPI_H
-
-#include <mach/edma.h>
-
-#define SPI_INTERN_CS 0xFF
-
-enum {
- SPI_VERSION_1, /* For DM355/DM365/DM6467 */
- SPI_VERSION_2, /* For DA8xx */
-};
-
-/**
- * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
- *
- * @version: version of the SPI IP. Different DaVinci devices have slightly
- * varying versions of the same IP.
- * @num_chipselect: number of chipselects supported by this SPI master
- * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt
- * controller withn the SoC. Possible values are 0 and 1.
- * @chip_sel: list of GPIOs which can act as chip-selects for the SPI.
- * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
- * to populate if all chip-selects are internal.
- * @cshold_bug: set this to true if the SPI controller on your chip requires
- * a write to CSHOLD bit in between transfers (like in DM355).
- * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
- * device on the bus.
- */
-struct davinci_spi_platform_data {
- u8 version;
- u8 num_chipselect;
- u8 intr_line;
- u8 *chip_sel;
- bool cshold_bug;
- enum dma_event_q dma_event_q;
-};
-
-/**
- * davinci_spi_config - Per-chip-select configuration for SPI slave devices
- *
- * @wdelay: amount of delay between transmissions. Measured in number of
- * SPI module clocks.
- * @odd_parity: polarity of parity flag at the end of transmit data stream.
- * 0 - odd parity, 1 - even parity.
- * @parity_enable: enable transmission of parity at end of each transmit
- * data stream.
- * @io_type: type of IO transfer. Choose between polled, interrupt and DMA.
- * @timer_disable: disable chip-select timers (setup and hold)
- * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks.
- * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks.
- * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured
- * in number of SPI clocks.
- * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in
- * number of SPI clocks.
- */
-struct davinci_spi_config {
- u8 wdelay;
- u8 odd_parity;
- u8 parity_enable;
-#define SPI_IO_TYPE_INTR 0
-#define SPI_IO_TYPE_POLL 1
-#define SPI_IO_TYPE_DMA 2
- u8 io_type;
- u8 timer_disable;
- u8 c2tdelay;
- u8 t2cdelay;
- u8 t2edelay;
- u8 c2edelay;
-};
-
-#endif /* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 83e5926f3c46..1656a02e3eda 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -36,8 +36,8 @@
#include <linux/input/matrix_keypad.h>
#include <linux/mfd/ti_ssp.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
#include <mach/serial.h>
struct tnetv107x_device_info {
diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h
deleted file mode 100644
index e0bc4abe69c2..000000000000
--- a/arch/arm/mach-davinci/include/mach/usb.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * USB related definitions
- *
- * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
-#define CFGCHIP2_PHYCLKGD (1 << 17)
-#define CFGCHIP2_VBUSSENSE (1 << 16)
-#define CFGCHIP2_RESET (1 << 15)
-#define CFGCHIP2_OTGMODE (3 << 13)
-#define CFGCHIP2_NO_OVERRIDE (0 << 13)
-#define CFGCHIP2_FORCE_HOST (1 << 13)
-#define CFGCHIP2_FORCE_DEVICE (2 << 13)
-#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
-#define CFGCHIP2_USB1PHYCLKMUX (1 << 12)
-#define CFGCHIP2_USB2PHYCLKMUX (1 << 11)
-#define CFGCHIP2_PHYPWRDN (1 << 10)
-#define CFGCHIP2_OTGPWRDN (1 << 9)
-#define CFGCHIP2_DATPOL (1 << 8)
-#define CFGCHIP2_USB1SUSPENDM (1 << 7)
-#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */
-#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */
-#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */
-#define CFGCHIP2_REFFREQ (0xf << 0)
-#define CFGCHIP2_REFFREQ_12MHZ (1 << 0)
-#define CFGCHIP2_REFFREQ_24MHZ (2 << 0)
-#define CFGCHIP2_REFFREQ_48MHZ (3 << 0)
-
-struct da8xx_ohci_root_hub;
-
-typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
- unsigned port);
-
-/* Passed as the platform data to the OHCI driver */
-struct da8xx_ohci_root_hub {
- /* Switch the port power on/off */
- int (*set_power)(unsigned port, int on);
- /* Read the port power status */
- int (*get_power)(unsigned port);
- /* Read the port over-current indicator */
- int (*get_oci)(unsigned port);
- /* Over-current indicator change notification (pass NULL to disable) */
- int (*ocic_notify)(da8xx_ocic_handler_t handler);
-
- /* Time from power on to power good (in 2 ms units) */
- u8 potpgt;
-};
-
-void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
-
-#endif /* ifndef __ASM_ARCH_USB_H */
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 23d2b6d9fa63..f77b95336e2b 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -10,7 +10,7 @@
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
#define DAVINCI_USB_OTG_BASE 0x01c64000
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index bd54d7b7ef85..950ad9533d19 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -28,7 +28,7 @@
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
deleted file mode 100644
index e7e5101e35a5..000000000000
--- a/arch/arm/mach-dove/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 9bc97a5baaa8..186357f3b4db 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -18,6 +18,7 @@
#include <asm/mach/irq.h>
#include <mach/pm.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include "common.h"
static void pmu_irq_mask(struct irq_data *d)
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
index 7f70afc26f91..60bd729a1ba5 100644
--- a/arch/arm/mach-dove/mpp.c
+++ b/arch/arm/mach-dove/mpp.c
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <plat/mpp.h>
#include <mach/dove.h>
+#include <plat/orion-gpio.h>
#include "mpp.h"
struct dove_mpp_grp {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 4afe52aaaff3..e85bf17f2d2a 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,9 +36,9 @@
#include <linux/export.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_keypad.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/keypad-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c
index 16976d7bdc8a..d8bfd02f5047 100644
--- a/arch/arm/mach-ep93xx/dma.c
+++ b/arch/arm/mach-ep93xx/dma.c
@@ -25,7 +25,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
#include <mach/hardware.h>
#include "soc.h"
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 337ab7cf4c16..b8f53d57a299 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -35,8 +35,8 @@
#include <sound/cs4271.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
deleted file mode 100644
index e82c642fa53c..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-
-/*
- * M2P channels.
- *
- * Note that these values are also directly used for setting the PPALLOC
- * register.
- */
-#define EP93XX_DMA_I2S1 0
-#define EP93XX_DMA_I2S2 1
-#define EP93XX_DMA_AAC1 2
-#define EP93XX_DMA_AAC2 3
-#define EP93XX_DMA_AAC3 4
-#define EP93XX_DMA_I2S3 5
-#define EP93XX_DMA_UART1 6
-#define EP93XX_DMA_UART2 7
-#define EP93XX_DMA_UART3 8
-#define EP93XX_DMA_IRDA 9
-/* M2M channels */
-#define EP93XX_DMA_SSP 10
-#define EP93XX_DMA_IDE 11
-
-/**
- * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
- * @port: peripheral which is requesting the channel
- * @direction: TX/RX channel
- * @name: optional name for the channel, this is displayed in /proc/interrupts
- *
- * This information is passed as private channel parameter in a filter
- * function. Note that this is only needed for slave/cyclic channels. For
- * memcpy channels %NULL data should be passed.
- */
-struct ep93xx_dma_data {
- int port;
- enum dma_transfer_direction direction;
- const char *name;
-};
-
-/**
- * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
- * @name: name of the channel, used for getting the right clock for the channel
- * @base: mapped registers
- * @irq: interrupt number used by this channel
- */
-struct ep93xx_dma_chan_data {
- const char *name;
- void __iomem *base;
- int irq;
-};
-
-/**
- * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
- * @channels: array of channels which are passed to the driver
- * @num_channels: number of channels in the array
- *
- * This structure is passed to the DMA engine driver via platform data. For
- * M2P channels, contract is that even channels are for TX and odd for RX.
- * There is no requirement for the M2M channels.
- */
-struct ep93xx_dma_platform_data {
- struct ep93xx_dma_chan_data *channels;
- size_t num_channels;
-};
-
-static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
-{
- return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
-}
-
-/**
- * ep93xx_dma_chan_direction - returns direction the channel can be used
- * @chan: channel
- *
- * This function can be used in filter functions to find out whether the
- * channel supports given DMA direction. Only M2P channels have such
- * limitation, for M2M channels the direction is configurable.
- */
-static inline enum dma_transfer_direction
-ep93xx_dma_chan_direction(struct dma_chan *chan)
-{
- if (!ep93xx_dma_chan_is_m2p(chan))
- return DMA_NONE;
-
- /* even channels are for TX, odd for RX */
- return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
-}
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
deleted file mode 100644
index 1e2f4e97f428..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
-#define __ASM_ARCH_EP93XX_KEYPAD_H
-
-struct matrix_keymap_data;
-
-/* flags for the ep93xx_keypad driver */
-#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */
-#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */
-#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */
-#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */
-#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */
-#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */
-
-/**
- * struct ep93xx_keypad_platform_data - platform specific device structure
- * @keymap_data: pointer to &matrix_keymap_data
- * @debounce: debounce start count; terminal count is 0xff
- * @prescale: row/column counter pre-scaler load value
- * @flags: see above
- */
-struct ep93xx_keypad_platform_data {
- struct matrix_keymap_data *keymap_data;
- unsigned int debounce;
- unsigned int prescale;
- unsigned int flags;
-};
-
-#define EP93XX_MATRIX_ROWS (8)
-#define EP93XX_MATRIX_COLS (8)
-
-#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
deleted file mode 100644
index 9bb63ac13f04..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_EP93XX_SPI_H
-#define __ASM_MACH_EP93XX_SPI_H
-
-struct spi_device;
-
-/**
- * struct ep93xx_spi_info - EP93xx specific SPI descriptor
- * @num_chipselect: number of chip selects on this board, must be
- * at least one
- * @use_dma: use DMA for the transfers
- */
-struct ep93xx_spi_info {
- int num_chipselect;
- bool use_dma;
-};
-
-/**
- * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
- * @setup: setup the chip select mechanism
- * @cleanup: cleanup the chip select mechanism
- * @cs_control: control the device chip select
- */
-struct ep93xx_spi_chip_ops {
- int (*setup)(struct spi_device *spi);
- void (*cleanup)(struct spi_device *spi);
- void (*cs_control)(struct spi_device *spi, int value);
-};
-
-#endif /* __ASM_MACH_EP93XX_SPI_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/fb.h b/arch/arm/mach-ep93xx/include/mach/fb.h
deleted file mode 100644
index d5ae11d7c453..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/fb.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/fb.h
- */
-
-#ifndef __ASM_ARCH_EP93XXFB_H
-#define __ASM_ARCH_EP93XXFB_H
-
-struct platform_device;
-struct fb_videomode;
-struct fb_info;
-
-#define EP93XXFB_USE_MODEDB 0
-
-/* VideoAttributes flags */
-#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0)
-#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1)
-#define EP93XXFB_VSYNC_ENABLE (1 << 2)
-#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3)
-#define EP93XXFB_COMPOSITE_SYNC (1 << 4)
-#define EP93XXFB_SYNC_VERT_HIGH (1 << 5)
-#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6)
-#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7)
-#define EP93XXFB_PCLK_FALLING (1 << 8)
-#define EP93XXFB_ENABLE_AC (1 << 9)
-#define EP93XXFB_ENABLE_LCD (1 << 10)
-#define EP93XXFB_ENABLE_CCIR (1 << 12)
-#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13)
-#define EP93XXFB_ENABLE_INTERRUPT (1 << 14)
-#define EP93XXFB_USB_INTERLACE (1 << 16)
-#define EP93XXFB_USE_EQUALIZATION (1 << 17)
-#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18)
-#define EP93XXFB_USE_DOUBLE_VERT (1 << 19)
-#define EP93XXFB_USE_BLANK_PIXEL (1 << 20)
-#define EP93XXFB_USE_SDCSN0 (0 << 21)
-#define EP93XXFB_USE_SDCSN1 (1 << 21)
-#define EP93XXFB_USE_SDCSN2 (2 << 21)
-#define EP93XXFB_USE_SDCSN3 (3 << 21)
-
-#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \
- EP93XXFB_PIXEL_CLOCK_ENABLE | \
- EP93XXFB_VSYNC_ENABLE | \
- EP93XXFB_PIXEL_DATA_ENABLE)
-
-struct ep93xxfb_mach_info {
- unsigned int num_modes;
- const struct fb_videomode *modes;
- const struct fb_videomode *default_mode;
- int bpp;
- unsigned int flags;
-
- int (*setup)(struct platform_device *pdev);
- void (*teardown)(struct platform_device *pdev);
- void (*blank)(int blank_mode, struct fb_info *info);
-};
-
-#endif /* __ASM_ARCH_EP93XXFB_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 33dc07917417..0eb3f17a6fa2 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -22,7 +22,7 @@
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 01abd3516a77..50043eef1cf2 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -28,7 +28,7 @@
#include <linux/mtd/nand.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 2905a4929bdc..ba92e25e3016 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -30,8 +30,8 @@
#include <linux/mmc/host.h>
#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
index a79d999725cb..b9862e22bf10 100644
--- a/arch/arm/mach-exynos/Makefile.boot
+++ b/arch/arm/mach-exynos/Makefile.boot
@@ -1,5 +1,2 @@
zreladdr-y += 0x40008000
params_phys-y := 0x40000100
-
-dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb exynos4210-trats.dtb
-dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index aed2eeb06517..dac146df79ac 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -14,6 +14,7 @@
extern struct sys_timer exynos4_timer;
+struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
void exynos5_init_irq(void);
@@ -59,4 +60,8 @@ void exynos4212_register_clocks(void);
#define exynos4212_register_clocks()
#endif
+extern struct smp_operations exynos_smp_ops;
+
+extern void exynos_cpu_die(unsigned int cpu);
+
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index b33a5b67b547..ae321c7cb15f 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -16,7 +16,7 @@
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c
index b8e75300c77d..14ed7951a2c6 100644
--- a/arch/arm/mach-exynos/dev-ohci.c
+++ b/arch/arm/mach-exynos/dev-ohci.c
@@ -15,7 +15,7 @@
#include <mach/irqs.h>
#include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <plat/devs.h>
#include <plat/usb-phy.h>
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 9c17a0a43858..f4d7dd20cdac 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -21,7 +21,7 @@
#include <mach/regs-pmu.h>
-extern volatile int pen_release;
+#include "common.h"
static inline void cpu_enter_lowpower(void)
{
@@ -95,17 +95,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref exynos_cpu_die(unsigned int cpu)
{
int spurious = 0;
@@ -124,12 +119,3 @@ void platform_cpu_die(unsigned int cpu)
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h
deleted file mode 100644
index c256c595be5e..000000000000
--- a/arch/arm/mach-exynos/include/mach/ohci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_OHCI_H
-#define __MACH_EXYNOS_OHCI_H
-
-struct exynos4_ohci_platdata {
- int (*phy_init)(struct platform_device *pdev, int type);
- int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
-
-#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index 5a3daa0168d8..3f37a5e8a1f4 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -199,6 +199,7 @@ static void __init armlex4210_machine_init(void)
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index fee9dcd49fdf..db1cd8eacf28 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -95,6 +95,7 @@ static char const *exynos5250_dt_compat[] __initdata = {
DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.init_irq = exynos5_init_irq,
+ .smp = smp_ops(exynos_smp_ops),
.map_io = exynos5250_dt_map_io,
.handle_irq = gic_handle_irq,
.init_machine = exynos5250_dt_machine_init,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index ea785fcaf6c3..480cd78f1920 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -45,14 +45,14 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
@@ -1383,6 +1383,7 @@ static void __init nuri_machine_init(void)
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index b45600fcf73e..67b50bb89c0f 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -36,8 +36,8 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
@@ -45,7 +45,7 @@
#include <plat/mfc.h>
#include <plat/hdmi.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
@@ -812,6 +812,7 @@ static void __init origen_machine_init(void)
MACHINE_START(ORIGEN, "ORIGEN")
/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index 81bf59c6f4bf..7a265d1a82d3 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -33,7 +33,7 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
#include <plat/regs-fb.h>
@@ -376,6 +376,7 @@ static void __init smdk4x12_machine_init(void)
MACHINE_START(SMDK4212, "SMDK4212")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
@@ -389,6 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 12a1db29e1a1..c15d2238ceb0 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -35,16 +35,16 @@
#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/hdmi.h>
#include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
#include <drm/exynos_drm.h>
#include "common.h"
@@ -424,6 +424,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
@@ -436,6 +437,7 @@ MACHINE_END
MACHINE_START(SMDKC210, "SMDKC210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 4d1f40d44ed1..98d3aced2289 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -34,7 +34,7 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/fb.h>
#include <plat/mfc.h>
@@ -43,7 +43,7 @@
#include <plat/fimc-core.h>
#include <plat/s5p-time.h>
#include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
@@ -1155,6 +1155,7 @@ static void __init universal_machine_init(void)
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 36c3984aaa47..8d57e4223bdb 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,19 +32,14 @@
#include <plat/cpu.h>
+#include "common.h"
+
extern void exynos4_secondary_startup(void);
#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM5 : S5P_VA_SYSRAM)
/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-
-volatile int __cpuinitdata pen_release = -1;
-
-/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
* or not. This is necessary for the hotplug code to work reliably.
@@ -64,7 +59,7 @@ static void __iomem *scu_base_addr(void)
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit exynos_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@@ -86,7 +81,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
@@ -161,7 +156,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init exynos_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
@@ -184,7 +179,7 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{
if (!soc_is_exynos5250())
scu_enable(scu_base_addr());
@@ -198,3 +193,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
__raw_writel(virt_to_phys(exynos4_secondary_startup),
CPU1_BOOT_REG);
}
+
+struct smp_operations exynos_smp_ops __initdata = {
+ .smp_init_cpus = exynos_smp_init_cpus,
+ .smp_prepare_cpus = exynos_smp_prepare_cpus,
+ .smp_secondary_init = exynos_secondary_init,
+ .smp_boot_secondary = exynos_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = exynos_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c
index b90d94c17f7c..5700f23629f7 100644
--- a/arch/arm/mach-exynos/setup-i2c0.c
+++ b/arch/arm/mach-exynos/setup-i2c0.c
@@ -14,7 +14,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-exynos/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c
index fd7235a43f6e..8d2279cc85dc 100644
--- a/arch/arm/mach-exynos/setup-i2c1.c
+++ b/arch/arm/mach-exynos/setup-i2c1.c
@@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c
index 2694b19e8b37..0ed62fc42a77 100644
--- a/arch/arm/mach-exynos/setup-i2c2.c
+++ b/arch/arm/mach-exynos/setup-i2c2.c
@@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c
index 379bd306993f..7787fd26076b 100644
--- a/arch/arm/mach-exynos/setup-i2c3.c
+++ b/arch/arm/mach-exynos/setup-i2c3.c
@@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c3_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c
index 9f3c04855b76..edc847f89826 100644
--- a/arch/arm/mach-exynos/setup-i2c4.c
+++ b/arch/arm/mach-exynos/setup-i2c4.c
@@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c4_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c
index 77e1a1e57c76..d88af7f75954 100644
--- a/arch/arm/mach-exynos/setup-i2c5.c
+++ b/arch/arm/mach-exynos/setup-i2c5.c
@@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c5_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c
index 284d12b7af0e..c590286c9d3a 100644
--- a/arch/arm/mach-exynos/setup-i2c6.c
+++ b/arch/arm/mach-exynos/setup-i2c6.c
@@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c6_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c
index b7611ee359a2..1bba75568a5f 100644
--- a/arch/arm/mach-exynos/setup-i2c7.c
+++ b/arch/arm/mach-exynos/setup-i2c7.c
@@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c7_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
new file mode 100644
index 000000000000..0e1d0a42a3ea
--- /dev/null
+++ b/arch/arm/mach-highbank/Kconfig
@@ -0,0 +1,15 @@
+config ARCH_HIGHBANK
+ bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select CACHE_L2X0
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU
+ select HAVE_SMP
+ select SPARSE_IRQ
+ select USE_OF
diff --git a/arch/arm/mach-highbank/Makefile.boot b/arch/arm/mach-highbank/Makefile.boot
deleted file mode 100644
index dae9661a7689..000000000000
--- a/arch/arm/mach-highbank/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index 141ed5171826..286ec82a4f63 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -8,4 +8,13 @@ extern void highbank_lluart_map_io(void);
static inline void highbank_lluart_map_io(void) {}
#endif
+#ifdef CONFIG_PM_SLEEP
+extern void highbank_pm_init(void);
+#else
+static inline void highbank_pm_init(void) {}
+#endif
+
extern void highbank_smc1(int fn, int arg);
+extern void highbank_cpu_die(unsigned int cpu);
+
+extern struct smp_operations highbank_smp_ops;
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index d75b0a78d88a..af1da34ccf9d 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -152,6 +152,7 @@ static void highbank_power_off(void)
static void __init highbank_init(void)
{
pm_power_off = highbank_power_off;
+ highbank_pm_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -162,6 +163,7 @@ static const char *highbank_match[] __initconst = {
};
DT_MACHINE_START(HIGHBANK, "Highbank")
+ .smp = smp_ops(highbank_smp_ops),
.map_io = highbank_map_io,
.init_irq = highbank_init_irq,
.timer = &highbank_timer,
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
index 977cebbea580..2c1b8c3c8e45 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -24,16 +24,11 @@
extern void secondary_startup(void);
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref highbank_cpu_die(unsigned int cpu)
{
flush_cache_all();
@@ -45,12 +40,3 @@ void platform_cpu_die(unsigned int cpu)
/* We should never return from idle */
panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * CPU0 should not be shut down via hotplug. cpu_idle can WFI
- * or a proper shutdown or hibernate should be used.
- */
- return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-highbank/include/mach/gpio.h b/arch/arm/mach-highbank/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-highbank/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-highbank/include/mach/timex.h b/arch/arm/mach-highbank/include/mach/timex.h
deleted file mode 100644
index 88dac7a55a97..000000000000
--- a/arch/arm/mach-highbank/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE 1000000
-
-#endif
diff --git a/arch/arm/mach-highbank/include/mach/uncompress.h b/arch/arm/mach-highbank/include/mach/uncompress.h
deleted file mode 100644
index bbe20e696325..000000000000
--- a/arch/arm/mach-highbank/include/mach/uncompress.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
index d01364c72b45..fa9560ec6e70 100644
--- a/arch/arm/mach-highbank/platsmp.c
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -25,12 +25,12 @@
extern void secondary_startup(void);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit highbank_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
gic_raise_softirq(cpumask_of(cpu), 0);
return 0;
@@ -40,7 +40,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init highbank_smp_init_cpus(void)
{
unsigned int i, ncores;
@@ -61,7 +61,7 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
@@ -76,3 +76,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
for (i = 1; i < max_cpus; i++)
highbank_set_cpu_jump(i, secondary_startup);
}
+
+struct smp_operations highbank_smp_ops __initdata = {
+ .smp_init_cpus = highbank_smp_init_cpus,
+ .smp_prepare_cpus = highbank_smp_prepare_cpus,
+ .smp_secondary_init = highbank_secondary_init,
+ .smp_boot_secondary = highbank_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = highbank_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 33b3beb89982..de866f21331f 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -47,9 +47,7 @@ static const struct platform_suspend_ops highbank_pm_ops = {
.valid = suspend_valid_only_mem,
};
-static int __init highbank_pm_init(void)
+void __init highbank_pm_init(void)
{
suspend_set_ops(&highbank_pm_ops);
- return 0;
}
-module_init(highbank_pm_init);
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index c60967629e27..b27815de8473 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -37,14 +37,3 @@ initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
-
-dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-
-dtb-$(CONFIG_SOC_IMX53) += imx53-ard.dtb \
- imx53-evk.dtb \
- imx53-qsb.dtb \
- imx53-smd.dtb \
-
-dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 05bb41d99728..412c583a24b0 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
index fa69419eabdd..cd6e1f81508d 100644
--- a/arch/arm/mach-imx/ehci-imx27.c
+++ b/arch/arm/mach-imx/ehci-imx27.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
index faad0f15ac7f..9a880c78af34 100644
--- a/arch/arm/mach-imx/ehci-imx31.c
+++ b/arch/arm/mach-imx/ehci-imx31.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 73574c30cf50..779e16eb65cb 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c
index a6a4afb0ad62..cf8d00e5cce1 100644
--- a/arch/arm/mach-imx/ehci-imx5.c
+++ b/arch/arm/mach-imx/ehci-imx5.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index f8f7437c83b8..b07b778dc9a8 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -15,11 +15,6 @@
#include <asm/cp15.h>
#include <mach/common.h>
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
@@ -47,7 +42,7 @@ static inline void cpu_enter_lowpower(void)
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
@@ -56,12 +51,3 @@ void platform_cpu_die(unsigned int cpu)
while (1)
;
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 692b4b143bb1..36979d3dfe34 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -215,6 +215,7 @@ static const char *imx6q_dt_compat[] __initdata = {
};
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+ .smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
.handle_irq = imx6q_handle_irq,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index d46290b288ed..459e754ef8c9 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -47,7 +47,7 @@
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/ulpi.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
#include "devices-imx31.h"
diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
index b09ee12a4ff0..fb38436ca67f 100644
--- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
+++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
@@ -11,7 +11,7 @@
#include <linux/platform_device.h>
#include <linux/module.h>
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
/* IMX camera FIQ handler */
EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index ab98c6fec9eb..2ac43e1a2dfd 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -41,7 +41,7 @@ void __init imx_scu_map_io(void)
scu_base = IMX_IO_ADDRESS(base);
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit imx_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@@ -51,7 +51,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
gic_secondary_init(0);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
imx_set_cpu_jump(cpu, v7_secondary_startup);
imx_enable_cpu(cpu, true);
@@ -62,7 +62,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init imx_smp_init_cpus(void)
{
int i, ncores;
@@ -79,7 +79,17 @@ void imx_smp_prepare(void)
scu_enable(scu_base);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
{
imx_smp_prepare();
}
+
+struct smp_operations imx_smp_ops __initdata = {
+ .smp_init_cpus = imx_smp_init_cpus,
+ .smp_prepare_cpus = imx_smp_prepare_cpus,
+ .smp_secondary_init = imx_secondary_init,
+ .smp_boot_secondary = imx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = imx_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
deleted file mode 100644
index ef37f2635b0e..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* empty */
-
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index a13299d758e1..760a0efe7580 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -1,14 +1,3 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
-dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
-dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb
-dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb
-dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index aeb234d0d0e3..20af53a56c0e 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -30,7 +30,7 @@
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 413e2c8ef5fe..001ca8c96980 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -32,7 +32,7 @@
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 3f7b05f30b46..5c38c94b79a2 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -26,15 +26,15 @@
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
#include <plat/cache-feroceon-l2.h>
-#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
#include "common.h"
/*****************************************************************************
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 6e1bac929ab5..2c1a453df201 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -32,7 +32,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index be90b7d0e10b..c49b177c1523 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -18,7 +18,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 61d9a552a054..23dcb19cc2a7 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -19,7 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index bdaed3867d13..7cb55f982243 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -19,7 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/include/mach/gpio.h b/arch/arm/mach-kirkwood/include/mach/gpio.h
deleted file mode 100644
index 84f340b546c0..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
deleted file mode 100644
index 24b536ebdf13..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
- *
- * Platform data structure for netxbig LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NETXBIG_H
-#define __MACH_LEDS_NETXBIG_H
-
-struct netxbig_gpio_ext {
- unsigned *addr;
- int num_addr;
- unsigned *data;
- int num_data;
- unsigned enable;
-};
-
-enum netxbig_led_mode {
- NETXBIG_LED_OFF,
- NETXBIG_LED_ON,
- NETXBIG_LED_SATA,
- NETXBIG_LED_TIMER1,
- NETXBIG_LED_TIMER2,
- NETXBIG_LED_MODE_NUM,
-};
-
-#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
-
-struct netxbig_led_timer {
- unsigned long delay_on;
- unsigned long delay_off;
- enum netxbig_led_mode mode;
-};
-
-struct netxbig_led {
- const char *name;
- const char *default_trigger;
- int mode_addr;
- int *mode_val;
- int bright_addr;
-};
-
-struct netxbig_led_platform_data {
- struct netxbig_gpio_ext *gpio_ext;
- struct netxbig_led_timer *timer;
- int num_timer;
- struct netxbig_led *leds;
- int num_leds;
-};
-
-#endif /* __MACH_LEDS_NETXBIG_H */
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
deleted file mode 100644
index e21272e5f668..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
- *
- * Platform data structure for Network Space v2 LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NS2_H
-#define __MACH_LEDS_NS2_H
-
-struct ns2_led {
- const char *name;
- const char *default_trigger;
- unsigned cmd;
- unsigned slow;
-};
-
-struct ns2_led_platform_data {
- int num_leds;
- struct ns2_led *leds;
-};
-
-#endif /* __MACH_LEDS_NS2_H */
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 720063ffa19d..20149a7fd280 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
static int __initdata gpio0_irqs[4] = {
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index e6bba01bae38..88b0788bacae 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -34,7 +34,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 31ae8de34e93..a3b091470b8a 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -32,7 +32,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 7e99c3f340fc..134ef50d58fc 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -20,7 +20,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index f742a66a7045..19072c84008f 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -19,6 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#define RD88F6192_GPIO_USB_VBUS 10
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index ef922079348b..9717101a7437 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -20,7 +20,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 4ea70e5f7137..28d0abaf4bd9 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -19,7 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
index 697323b5f92d..d7392a475247 100644
--- a/arch/arm/mach-lpc32xx/Makefile.boot
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -1,5 +1,3 @@
zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x82000000
-
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 223090b1444d..e5dba9c5dc54 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -27,7 +27,7 @@
#include <mach/irqs.h>
#include <video/pxa168fb.h>
#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include "common.h"
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index cba22fed2265..c4ca4d17194a 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -13,7 +13,7 @@ extern void mmp2_clear_pmic_int(void);
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
extern struct pxa_device_desc mmp2_device_uart1;
extern struct pxa_device_desc mmp2_device_uart2;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 09dcd6e2b6a8..37632d964d50 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -11,9 +11,9 @@ extern void pxa168_clear_keypad_wakeup(void);
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <video/pxa168fb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/cputype.h>
#include <linux/pxa168_eth.h>
#include <linux/platform_data/mv_usb.h>
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 793634c837ef..3b58a3b2d7df 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -9,7 +9,7 @@ extern void __init pxa910_init_irq(void);
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
diff --git a/arch/arm/mach-mmp/include/mach/sram.h b/arch/arm/mach-mmp/include/mach/sram.h
deleted file mode 100644
index 239e0fc1bb1f..000000000000
--- a/arch/arm/mach-mmp/include/mach/sram.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/sram.h
- *
- * SRAM Memory Management
- *
- * Copyright (c) 2011 Marvell Semiconductors Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_SRAM_H
-#define __ASM_ARCH_SRAM_H
-
-#include <linux/genalloc.h>
-
-/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
-#define SRAM_GRANULARITY 512
-
-enum sram_type {
- MMP_SRAM_UNDEFINED = 0,
- MMP_ASRAM,
- MMP_ISRAM,
-};
-
-struct sram_platdata {
- char *pool_name;
- int granularity;
-};
-
-extern struct gen_pool *sram_get_gpool(char *pool_name);
-
-#endif /* __ASM_ARCH_SRAM_H */
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 7e8a5a2e1ec7..a6c08ede4491 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -22,7 +22,7 @@
#include <linux/slab.h>
#include <linux/genalloc.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
struct sram_bank_info {
char *pool_name;
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index 42bef6674ecf..dd30ea74785c 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -17,7 +17,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
index f7d6ae9c3487..9b803a578b4d 100644
--- a/arch/arm/mach-msm/Makefile.boot
+++ b/arch/arm/mach-msm/Makefile.boot
@@ -1,6 +1,3 @@
zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000
-
-dtb-$(CONFIG_ARCH_MSM8X60) += msm8660-surf.dtb
-dtb-$(CONFIG_ARCH_MSM8960) += msm8960-cdp.dtb
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
index f77f57f39104..b5b4de2cdf9e 100644
--- a/arch/arm/mach-msm/board-dt-8660.c
+++ b/arch/arm/mach-msm/board-dt-8660.c
@@ -53,6 +53,7 @@ static const char *msm8x60_fluid_match[] __initdata = {
};
DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .smp = smp_ops(msm_smp_ops),
.map_io = msm_map_msm8x60_io,
.init_irq = msm8x60_init_irq,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c
index 8df99b8f3c92..4490edb71c17 100644
--- a/arch/arm/mach-msm/board-dt-8960.c
+++ b/arch/arm/mach-msm/board-dt-8960.c
@@ -40,6 +40,7 @@ static const char * const msm8960_dt_match[] __initconst = {
};
DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .smp = smp_ops(msm_smp_ops),
.map_io = msm_map_msm8960_io,
.init_irq = msm_dt_init_irq,
.timer = &msm_dt_timer,
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index b16b71abf5f6..a344a373928b 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -32,7 +32,7 @@
#include <mach/irqs.h>
#include <mach/sirc.h>
#include <mach/vreg.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
#include "common.h"
diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c
index 8650342b7493..3723e55819d6 100644
--- a/arch/arm/mach-msm/board-trout-mmc.c
+++ b/arch/arm/mach-msm/board-trout-mmc.c
@@ -15,7 +15,7 @@
#include <mach/vreg.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index 89bf6b426699..f9a5db6d2ced 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -14,7 +14,7 @@
#include <asm/mach-types.h>
#include <asm/system_info.h>
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
#include <mach/vreg.h>
#include "board-trout.h"
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index d68e5d7854f5..633a7159d5ff 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -26,5 +26,7 @@ extern void msm_map_qsd8x50_io(void);
extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
unsigned int mtype, void *caller);
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
#endif
diff --git a/arch/arm/mach-msm/core.h b/arch/arm/mach-msm/core.h
new file mode 100644
index 000000000000..a9bab53dddf4
--- /dev/null
+++ b/arch/arm/mach-msm/core.h
@@ -0,0 +1,2 @@
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
index 993780f490ad..f66ee6ea8720 100644
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -27,7 +27,7 @@
#include "clock.h"
#include "clock-pcom.h"
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
static struct resource resources_uart1[] = {
{
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index 09b4f1403824..e90ab5938c5f 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -31,7 +31,7 @@
#include "clock-pcom.h"
#include "clock-7x30.h"
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
static struct resource resources_uart2[] = {
{
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 131633b12a34..4db61d5fe317 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -27,7 +27,7 @@
#include <asm/mach/flash.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
#include "clock-pcom.h"
static struct resource resources_uart3[] = {
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
index a446fc14221f..750446feb444 100644
--- a/arch/arm/mach-msm/hotplug.c
+++ b/arch/arm/mach-msm/hotplug.c
@@ -13,7 +13,7 @@
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
+#include "common.h"
static inline void cpu_enter_lowpower(void)
{
@@ -57,17 +57,12 @@ static inline void platform_do_lowpower(unsigned int cpu)
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref msm_cpu_die(unsigned int cpu)
{
/*
* we're ready for shutdown now, so do it
@@ -81,12 +76,3 @@ void platform_cpu_die(unsigned int cpu)
*/
cpu_leave_lowpower();
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 0a0c393d8e31..8cebedb11233 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -18,7 +18,7 @@
#define __ASM_ARCH_MSM_BOARD_H
#include <linux/types.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
/* platform device data structures */
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h
deleted file mode 100644
index ffcd9e3a6a7e..000000000000
--- a/arch/arm/mach-msm/include/mach/mmc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-
-struct msm_mmc_gpio {
- unsigned no;
- const char *name;
-};
-
-struct msm_mmc_gpio_data {
- struct msm_mmc_gpio *gpio;
- u8 size;
-};
-
-struct msm_mmc_platform_data {
- unsigned int ocr_mask; /* available voltages */
- u32 (*translate_vdd)(struct device *, unsigned int);
- unsigned int (*status)(struct device *);
- int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
- struct msm_mmc_gpio_data *gpio_data;
- void (*init_card)(struct mmc_card *card);
-};
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_fb.h b/arch/arm/mach-msm/include/mach/msm_fb.h
deleted file mode 100644
index 1f4fc81b3d8f..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_fb.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/* arch/arm/mach-msm/include/mach/msm_fb.h
- *
- * Internal shared definitions for various MSM framebuffer parts.
- *
- * Copyright (C) 2007 Google Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MSM_FB_H_
-#define _MSM_FB_H_
-
-#include <linux/device.h>
-
-struct mddi_info;
-
-struct msm_fb_data {
- int xres; /* x resolution in pixels */
- int yres; /* y resolution in pixels */
- int width; /* disply width in mm */
- int height; /* display height in mm */
- unsigned output_format;
-};
-
-struct msmfb_callback {
- void (*func)(struct msmfb_callback *);
-};
-
-enum {
- MSM_MDDI_PMDH_INTERFACE,
- MSM_MDDI_EMDH_INTERFACE,
- MSM_EBI2_INTERFACE,
-};
-
-#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0)
-
-struct msm_panel_data {
- /* turns off the fb memory */
- int (*suspend)(struct msm_panel_data *);
- /* turns on the fb memory */
- int (*resume)(struct msm_panel_data *);
- /* turns off the panel */
- int (*blank)(struct msm_panel_data *);
- /* turns on the panel */
- int (*unblank)(struct msm_panel_data *);
- void (*wait_vsync)(struct msm_panel_data *);
- void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *);
- void (*clear_vsync)(struct msm_panel_data *);
- /* from the enum above */
- unsigned interface_type;
- /* data to be passed to the fb driver */
- struct msm_fb_data *fb_data;
-
- /* capabilities supported by the panel */
- uint32_t caps;
-};
-
-struct msm_mddi_client_data {
- void (*suspend)(struct msm_mddi_client_data *);
- void (*resume)(struct msm_mddi_client_data *);
- void (*activate_link)(struct msm_mddi_client_data *);
- void (*remote_write)(struct msm_mddi_client_data *, uint32_t val,
- uint32_t reg);
- uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg);
- void (*auto_hibernate)(struct msm_mddi_client_data *, int);
- /* custom data that needs to be passed from the board file to a
- * particular client */
- void *private_client_data;
- struct resource *fb_resource;
- /* from the list above */
- unsigned interface_type;
-};
-
-struct msm_mddi_platform_data {
- unsigned int clk_rate;
- void (*power_client)(struct msm_mddi_client_data *, int on);
-
- /* fixup the mfr name, product id */
- void (*fixup)(uint16_t *mfr_name, uint16_t *product_id);
-
- struct resource *fb_resource; /*optional*/
- /* number of clients in the list that follows */
- int num_clients;
- /* array of client information of clients */
- struct {
- unsigned product_id; /* mfr id in top 16 bits, product id
- * in lower 16 bits
- */
- char *name; /* the device name will be the platform
- * device name registered for the client,
- * it should match the name of the associated
- * driver
- */
- unsigned id; /* id for mddi client device node, will also
- * be used as device id of panel devices, if
- * the client device will have multiple panels
- * space must be left here for them
- */
- void *client_data; /* required private client data */
- unsigned int clk_rate; /* optional: if the client requires a
- * different mddi clk rate
- */
- } client_platform_data[];
-};
-
-struct mdp_blit_req;
-struct fb_info;
-struct mdp_device {
- struct device dev;
- void (*dma)(struct mdp_device *mpd, uint32_t addr,
- uint32_t stride, uint32_t w, uint32_t h, uint32_t x,
- uint32_t y, struct msmfb_callback *callback, int interface);
- void (*dma_wait)(struct mdp_device *mdp);
- int (*blit)(struct mdp_device *mdp, struct fb_info *fb,
- struct mdp_blit_req *req);
- void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id);
-};
-
-struct class_interface;
-int register_mdp_client(struct class_interface *class_intf);
-
-/**** private client data structs go below this line ***/
-
-struct msm_mddi_bridge_platform_data {
- /* from board file */
- int (*init)(struct msm_mddi_bridge_platform_data *,
- struct msm_mddi_client_data *);
- int (*uninit)(struct msm_mddi_bridge_platform_data *,
- struct msm_mddi_client_data *);
- /* passed to panel for use by the fb driver */
- int (*blank)(struct msm_mddi_bridge_platform_data *,
- struct msm_mddi_client_data *);
- int (*unblank)(struct msm_mddi_bridge_platform_data *,
- struct msm_mddi_client_data *);
- struct msm_fb_data fb_data;
-};
-
-
-
-#endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 2d791e6b4ad1..7ed69b69c87c 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -23,17 +23,13 @@
#include <asm/smp_plat.h>
#include "scm-boot.h"
+#include "common.h"
#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
#define SCSS_CPU1CORE_RESET 0xD80
#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
extern void msm_secondary_startup(void);
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen".
- */
-volatile int pen_release = -1;
static DEFINE_SPINLOCK(boot_lock);
@@ -43,7 +39,7 @@ static inline int get_core_count(void)
return ((read_cpuid_id() >> 4) & 3) + 1;
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit msm_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@@ -85,7 +81,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu)
"address\n");
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
static int cold_boot_done;
@@ -145,7 +141,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* does not support the ARM SCU, so just set the possible cpu mask to
* NR_CPUS.
*/
-void __init smp_init_cpus(void)
+static void __init msm_smp_init_cpus(void)
{
unsigned int i, ncores = get_core_count();
@@ -161,6 +157,16 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
{
}
+
+struct smp_operations msm_smp_ops __initdata = {
+ .smp_init_cpus = msm_smp_init_cpus,
+ .smp_prepare_cpus = msm_smp_prepare_cpus,
+ .smp_secondary_init = msm_secondary_init,
+ .smp_boot_secondary = msm_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = msm_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 6b0c38735527..a6f3cd21e8c2 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -20,8 +20,8 @@
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
-#include <plat/ehci-orion.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index eff9a750bbe2..4d720f2aedba 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index caa2c5e734fe..7b270358536e 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,3 +1,13 @@
+config ARCH_MVEBU
+ bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+ select CLKSRC_MMIO
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
if ARCH_MVEBU
menu "Marvell SOC with device tree"
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index e61d2b8fdf50..6ea8998ab8f1 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,2 +1,4 @@
+ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
obj-y += system-controller.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
diff --git a/arch/arm/mach-mvebu/Makefile.boot b/arch/arm/mach-mvebu/Makefile.boot
deleted file mode 100644
index 2579a2fc2334..000000000000
--- a/arch/arm/mach-mvebu/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y := 0x00008000
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 4ef923b032ec..b46418a8b352 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -20,7 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/armada-370-xp.h>
+#include "armada-370-xp.h"
#include "common.h"
static struct map_desc armada_370_xp_io_desc[] __initdata = {
diff --git a/arch/arm/mach-mvebu/include/mach/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 25f0ca8d7820..25f0ca8d7820 100644
--- a/arch/arm/mach-mvebu/include/mach/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
diff --git a/arch/arm/mach-mvebu/include/mach/timex.h b/arch/arm/mach-mvebu/include/mach/timex.h
deleted file mode 100644
index ab324a3748f2..000000000000
--- a/arch/arm/mach-mvebu/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Marvell Armada SoC time definitions
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-mvebu/include/mach/uncompress.h b/arch/arm/mach-mvebu/include/mach/uncompress.h
deleted file mode 100644
index d6a100ccf302..000000000000
--- a/arch/arm/mach-mvebu/include/mach/uncompress.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Marvell Armada SoC kernel uncompression UART routines
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/armada-370-xp.h>
-
-#define UART_THR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
- + 0x12000))
-#define UART_LSR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
- + 0x12014))
-
-#define LSR_THRE 0x20
-
-static void putc(const char c)
-{
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- /* Transmit fifo not full? */
- if (*UART_LSR & LSR_THRE)
- break;
- }
-
- *UART_THR = c;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot
index 8bd23a8558db..07b11fe6453f 100644
--- a/arch/arm/mach-mxs/Makefile.boot
+++ b/arch/arm/mach-mxs/Makefile.boot
@@ -1,11 +1 @@
zreladdr-y += 0x40008000
-
-dtb-y += imx23-evk.dtb \
- imx23-olinuxino.dtb \
- imx23-stmp378x_devb.dtb \
- imx28-apx4devkit.dtb \
- imx28-cfa10036.dtb \
- imx28-cfa10049.dtb \
- imx28-evk.dtb \
- imx28-m28evk.dtb \
- imx28-tx28.dtb \
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-mxs/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-netx/include/mach/eth.h b/arch/arm/mach-netx/include/mach/eth.h
deleted file mode 100644
index 88af1ac28ead..000000000000
--- a/arch/arm/mach-netx/include/mach/eth.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/eth.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef ASMARM_ARCH_ETH_H
-#define ASMARM_ARCH_ETH_H
-
-struct netxeth_platform_data {
- unsigned int xcno; /* number of xmac/xpec engine this eth uses */
-};
-
-#endif
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 180ea899a48a..8b781ff7c9e9 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -30,7 +30,7 @@
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 58009e29b20e..b26dbce334f2 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -30,7 +30,7 @@
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
#include "generic.h"
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 122e99826ef6..257382efafa0 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -30,7 +30,7 @@
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index c3841a9a8fa8..92a00260d074 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -34,7 +34,7 @@
#include <plat/gpio-nomadik.h>
#include <plat/mtu.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
#include <mach/fsmc.h>
#include "cpu-8815.h"
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
deleted file mode 100644
index efdde0ae0a4f..000000000000
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-nomadik/include/mach/nand.h b/arch/arm/mach-nomadik/include/mach/nand.h
deleted file mode 100644
index c3c8254c22a5..000000000000
--- a/arch/arm/mach-nomadik/include/mach/nand.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-struct nomadik_nand_platform_data {
- struct mtd_partition *parts;
- int nparts;
- int options;
- int (*init) (void);
- int (*exit) (void);
-};
-
-#define NAND_IO_DATA 0x40000000
-#define NAND_IO_CMD 0x40800000
-#define NAND_IO_ADDR 0x41000000
-
-#endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
index be0fe9226d67..b03e562acc60 100644
--- a/arch/arm/mach-omap2/Makefile.boot
+++ b/arch/arm/mach-omap2/Makefile.boot
@@ -1,9 +1,3 @@
zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
-
-dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb
-dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 749ce9634e8e..a88809a59ea9 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -915,6 +915,7 @@ static void __init omap_4430sdp_init(void)
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
.atag_offset = 0x100,
+ .smp = smp_ops(omap4_smp_ops),
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 2ea7c577b295..601ecdfb1cf9 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -125,6 +125,7 @@ static const char *omap4_boards_compat[] __initdata = {
DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
.reserve = omap_reserve,
+ .smp = smp_ops(omap4_smp_ops),
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = omap_gic_of_init,
@@ -145,6 +146,7 @@ static const char *omap5_boards_compat[] __initdata = {
DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
.reserve = omap_reserve,
+ .smp = smp_ops(omap4_smp_ops),
.map_io = omap5_map_io,
.init_early = omap5_init_early,
.init_irq = omap_gic_of_init,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 7b592d3d7797..e0dd70b9d917 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -524,6 +524,7 @@ static void __init omap4_panda_init(void)
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.atag_offset = 0x100,
+ .smp = smp_ops(omap4_smp_ops),
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index da0f5c187353..7045e4d61ac3 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -285,6 +285,11 @@ extern void omap_secondary_startup(void);
extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
extern void omap_auxcoreboot_addr(u32 cpu_addr);
extern u32 omap_read_auxcoreboot0(void);
+
+extern void omap4_cpu_die(unsigned int cpu);
+
+extern struct smp_operations omap4_smp_ops;
+
extern void omap5_secondary_startup(void);
#endif
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 765a2aceb665..e712d1725a8b 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -26,16 +26,11 @@
#include "powerdomain.h"
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
* Called with IRQs disabled
*/
-void __ref platform_cpu_die(unsigned int cpu)
+void __ref omap4_cpu_die(unsigned int cpu)
{
unsigned int boot_cpu = 0;
void __iomem *base = omap_get_wakeupgen_base();
@@ -75,12 +70,3 @@ void __ref platform_cpu_die(unsigned int cpu)
pr_debug("CPU%u: spurious wakeup call\n", cpu);
}
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 06d8bc3a8886..4d05fa8a4e48 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -49,7 +49,7 @@ void __iomem *omap4_get_scu_base(void)
return scu_base;
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit omap4_secondary_init(unsigned int cpu)
{
/*
* Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
@@ -77,7 +77,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
@@ -165,7 +165,7 @@ static void __init wakeup_secondary(void)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init omap4_smp_init_cpus(void)
{
unsigned int i = 0, ncores = 1, cpu_id;
@@ -196,7 +196,7 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
{
/*
@@ -207,3 +207,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
scu_enable(scu_base);
wakeup_secondary();
}
+
+struct smp_operations omap4_smp_ops __initdata = {
+ .smp_init_cpus = omap4_smp_init_cpus,
+ .smp_prepare_cpus = omap4_smp_prepare_cpus,
+ .smp_secondary_init = omap4_secondary_init,
+ .smp_boot_secondary = omap4_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = omap4_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 2fdd4e4f559a..073c7d799068 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -30,8 +30,8 @@
#include <mach/bridge-regs.h>
#include <mach/hardware.h>
#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index d75dcfa0f01c..e3629c063df2 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -27,6 +27,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 49a3fd630313..41fe2b1ff47c 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -24,7 +24,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index d470864b4e42..0e19db69f5c4 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -34,6 +34,7 @@
#include <asm/mach/pci.h>
#include <asm/system_info.h>
#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
deleted file mode 100644
index a1d0b78decb1..000000000000
--- a/arch/arm/mach-orion5x/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 17da7091d310..e152641cdb0e 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
#include <plat/irq.h>
static int __initdata gpio0_irqs[4] = {
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 1e458efafb9a..f1ae10ae5bd4 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -24,7 +24,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 0180c393c711..3506f16c0bf2 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -25,6 +25,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
new file mode 100644
index 000000000000..868796f8085c
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -0,0 +1,14 @@
+config ARCH_PICOXCELL
+ bool "Picochip PicoXcell" if ARCH_MULTI_V6
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select ARM_VIC
+ select CPU_V6K
+ select DW_APB_TIMER
+ select DW_APB_TIMER_OF
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_TCM
+ select NO_IOPORT
+ select SPARSE_IRQ
+ select USE_OF
diff --git a/arch/arm/mach-picoxcell/Makefile.boot b/arch/arm/mach-picoxcell/Makefile.boot
deleted file mode 100644
index b3271754e9fd..000000000000
--- a/arch/arm/mach-picoxcell/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index 8f9a0b47a7fa..f6c0849af5e9 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -20,14 +20,15 @@
#include <asm/hardware/vic.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/picoxcell_soc.h>
-
#include "common.h"
-#define WDT_CTRL_REG_EN_MASK (1 << 0)
-#define WDT_CTRL_REG_OFFS (0x00)
-#define WDT_TIMEOUT_REG_OFFS (0x04)
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
+#define PICOXCELL_PERIPH_BASE 0x80000000
+#define PICOXCELL_PERIPH_LENGTH SZ_4M
+
+#define WDT_CTRL_REG_EN_MASK (1 << 0)
+#define WDT_CTRL_REG_OFFS (0x00)
+#define WDT_TIMEOUT_REG_OFFS (0x04)
static void __iomem *wdt_regs;
/*
diff --git a/arch/arm/mach-picoxcell/include/mach/gpio.h b/arch/arm/mach-picoxcell/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/hardware.h b/arch/arm/mach-picoxcell/include/mach/hardware.h
deleted file mode 100644
index 70ff58192ec9..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/picoxcell_soc.h>
-
-#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/map.h b/arch/arm/mach-picoxcell/include/mach/map.h
deleted file mode 100644
index c06afad218bb..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/map.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_MAP_H__
-#define __PICOXCELL_MAP_H__
-
-#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
-
-#ifdef __ASSEMBLY__
-#define IO_ADDRESS(x) PHYS_TO_IO((x))
-#else
-#define IO_ADDRESS(x) (void __iomem __force *)(PHYS_TO_IO((x)))
-#endif
-
-#endif /* __PICOXCELL_MAP_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
deleted file mode 100644
index 5566fc88ddbc..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_SOC_H__
-#define __PICOXCELL_SOC_H__
-
-#define PICOXCELL_UART1_BASE 0x80230000
-#define PICOXCELL_PERIPH_BASE 0x80000000
-#define PICOXCELL_PERIPH_LENGTH SZ_4M
-#define PICOXCELL_VIC0_BASE 0x80060000
-#define PICOXCELL_VIC1_BASE 0x80064000
-
-#endif /* __PICOXCELL_SOC_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/timex.h b/arch/arm/mach-picoxcell/include/mach/timex.h
deleted file mode 100644
index 6c540a69f405..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __TIMEX_H__
-#define __TIMEX_H__
-
-/* Bogus value to allow the kernel to compile. */
-#define CLOCK_TICK_RATE 1000000
-
-#endif /* __TIMEX_H__ */
-
diff --git a/arch/arm/mach-picoxcell/include/mach/uncompress.h b/arch/arm/mach-picoxcell/include/mach/uncompress.h
deleted file mode 100644
index b60b19d1d739..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/uncompress.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot
index 98167da874c9..c77a4883a4ee 100644
--- a/arch/arm/mach-prima2/Makefile.boot
+++ b/arch/arm/mach-prima2/Makefile.boot
@@ -1,5 +1,3 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index ccdac4b6a469..ffa6d811aad8 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -32,7 +32,7 @@
#include <mach/pxa25x.h>
#include <mach/gumstix.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 76c4b9494031..3dfec1ec462d 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -30,7 +30,7 @@
#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 9244493dbcb7..208229342514 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -45,12 +45,12 @@
#include <mach/pxa27x.h>
#include <mach/balloon3.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 431ef56700c4..2503db9e3253 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -22,8 +22,8 @@
#include <linux/spi/libertas_spi.h>
#include <mach/pxa27x.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 8fa4ad27edf3..fc3afc7cd366 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -24,7 +24,7 @@
#include <mach/pxa25x.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/smemc.h>
#include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 3e4e9fe2d462..cc2b23afcaaf 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -48,12 +48,12 @@
#include <mach/pxa300.h>
#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <mach/audio.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index d28e802e2448..8404b24240ea 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -23,8 +23,8 @@
#include <mach/pxa27x.h>
#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 248804bb2c9d..2d4a7b4d5d78 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -27,11 +27,11 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index bb6def8ec979..a9c9c163dd95 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -24,8 +24,8 @@
#include <mach/pxa300.h>
#include <mach/colibri.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/audio.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d88e7b37f1da..25515cd7e68f 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -25,8 +25,8 @@
#include <mach/pxa320.h>
#include <mach/colibri.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 68cc75fac219..8240291ab8cf 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -24,9 +24,9 @@
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa300.h>
#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index c1fe32db4755..7c83f52c549c 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -46,8 +46,8 @@
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/corgi.h>
#include <mach/sharpsl_pm.h>
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 67f0de37f46e..7039f44b3647 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -23,8 +23,8 @@
#include <asm/mach/arch.h>
#include <mach/csb726.h>
#include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index c1f3b1279d97..ddaa04de8e22 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -7,17 +7,17 @@
#include <linux/i2c/pxa-i2c.h>
#include <mach/udc.h>
-#include <mach/pxa3xx-u2d.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/irqs.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/audio.h>
#include <mach/hardware.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "devices.h"
#include "generic.h"
@@ -383,9 +383,24 @@ struct platform_device pxa_device_asoc_platform = {
static u64 pxaficp_dmamask = ~(u32)0;
+static struct resource pxa_ir_resources[] = {
+ [0] = {
+ .start = IRQ_STUART,
+ .end = IRQ_STUART,
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .start = IRQ_ICP,
+ .end = IRQ_ICP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
struct platform_device pxa_device_ficp = {
.name = "pxa2xx-ir",
.id = -1,
+ .num_resources = ARRAY_SIZE(pxa_ir_resources),
+ .resource = pxa_ir_resources,
.dev = {
.dma_mask = &pxaficp_dmamask,
.coherent_dma_mask = 0xffffffff,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 97f82ad341bf..1b6411439ec8 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -42,11 +42,11 @@
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 4cb2391a782e..be2ee9bf5c6e 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -32,9 +32,9 @@
#include <mach/eseries-gpio.h>
#include <mach/eseries-irq.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 15ab2533667d..dc58fa0edb66 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -29,11 +29,11 @@
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index e529a35a44ce..60755a6bb1c6 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -41,7 +41,7 @@
#include <asm/mach/flash.h>
#include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/gumstix.h>
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index e6311988add2..5ecbd17b5641 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -45,7 +45,7 @@
#include <mach/pxa27x.h>
#include <mach/hx4700.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <sound/ak4641.h>
#include <video/platform_lcd.h>
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ae1e9977603e..64507cdd2e8f 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -33,9 +33,9 @@
#include <mach/pxa25x.h>
#include <mach/idp.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/bitfield.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
deleted file mode 100644
index d428be4db44c..000000000000
--- a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ARCOM_PCMCIA_H
-#define __ARCOM_PCMCIA_H
-
-struct arcom_pcmcia_pdata {
- int cd_gpio;
- int rdy_gpio;
- int pwr_gpio;
- void (*reset)(int state);
-};
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
deleted file mode 100644
index 6709b1cd7c77..000000000000
--- a/arch/arm/mach-pxa/include/mach/camera.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- camera.h - PXA camera driver header file
-
- Copyright (C) 2003, Intel Corporation
- Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define PXA_CAMERA_MASTER 1
-#define PXA_CAMERA_DATAWIDTH_4 2
-#define PXA_CAMERA_DATAWIDTH_5 4
-#define PXA_CAMERA_DATAWIDTH_8 8
-#define PXA_CAMERA_DATAWIDTH_9 0x10
-#define PXA_CAMERA_DATAWIDTH_10 0x20
-#define PXA_CAMERA_PCLK_EN 0x40
-#define PXA_CAMERA_MCLK_EN 0x80
-#define PXA_CAMERA_PCP 0x100
-#define PXA_CAMERA_HSP 0x200
-#define PXA_CAMERA_VSP 0x400
-
-struct pxacamera_platform_data {
- unsigned long flags;
- unsigned long mclk_10khz;
-};
-
-extern void pxa_set_camera_info(struct pxacamera_platform_data *);
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
deleted file mode 100644
index 3cd41f77dda4..000000000000
--- a/arch/arm/mach-pxa/include/mach/irda.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_OFF 1
-#define IR_SIRMODE 2
-#define IR_FIRMODE 4
-
-struct pxaficp_platform_data {
- int transceiver_cap;
- void (*transceiver_mode)(struct device *dev, int mode);
- int (*startup)(struct device *dev);
- void (*shutdown)(struct device *dev);
- int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
- bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
-};
-
-extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-void pxa2xx_transceiver_mode(struct device *dev, int mode);
-#endif
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
deleted file mode 100644
index 9eb515bb799d..000000000000
--- a/arch/arm/mach-pxa/include/mach/mmc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/interrupt.h>
-
-struct device;
-struct mmc_host;
-
-struct pxamci_platform_data {
- unsigned int ocr_mask; /* available voltages */
- unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */
- int (*init)(struct device *, irq_handler_t , void *);
- int (*get_ro)(struct device *);
- void (*setpower)(struct device *, unsigned int);
- void (*exit)(struct device *, void *);
- int gpio_card_detect; /* gpio detecting card insertion */
- int gpio_card_ro; /* gpio detecting read only toggle */
- bool gpio_card_ro_invert; /* gpio ro is inverted */
- int gpio_power; /* gpio powering up MMC bus */
- bool gpio_power_invert; /* gpio power is inverted */
-};
-
-extern void pxa_set_mci_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
deleted file mode 100644
index 95b6e2a6e514..000000000000
--- a/arch/arm/mach-pxa/include/mach/ohci.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef ASMARM_ARCH_OHCI_H
-#define ASMARM_ARCH_OHCI_H
-
-struct device;
-
-struct pxaohci_platform_data {
- int (*init)(struct device *);
- void (*exit)(struct device *);
-
- unsigned long flags;
-#define ENABLE_PORT1 (1 << 0)
-#define ENABLE_PORT2 (1 << 1)
-#define ENABLE_PORT3 (1 << 2)
-#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
-
-#define POWER_SENSE_LOW (1 << 3)
-#define POWER_CONTROL_LOW (1 << 4)
-#define NO_OC_PROTECTION (1 << 5)
-#define OC_MODE_GLOBAL (0 << 6)
-#define OC_MODE_PERPORT (1 << 6)
-
- int power_on_delay; /* Power On to Power Good time - in ms
- * HCD must wait for this duration before
- * accessing a powered on port
- */
- int port_mode;
-#define PMM_NPS_MODE 1
-#define PMM_GLOBAL_MODE 2
-#define PMM_PERPORT_MODE 3
-
- int power_budget;
-};
-
-extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h
deleted file mode 100644
index 58afb30d5298..000000000000
--- a/arch/arm/mach-pxa/include/mach/palmasoc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _INCLUDE_PALMASOC_H_
-#define _INCLUDE_PALMASOC_H_
-
-struct palm27x_asoc_info {
- int jack_gpio;
-};
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h b/arch/arm/mach-pxa/include/mach/pata_pxa.h
deleted file mode 100644
index 6cf7df1d5830..000000000000
--- a/arch/arm/mach-pxa/include/mach/pata_pxa.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Generic PXA PATA driver
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_PATA_PXA_H__
-#define __MACH_PATA_PXA_H__
-
-struct pata_pxa_pdata {
- /* PXA DMA DREQ<0:2> pin */
- uint32_t dma_dreq;
- /* Register shift */
- uint32_t reg_shift;
- /* IRQ flags */
- uint32_t irq_flags;
-};
-
-#endif /* __MACH_PATA_PXA_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
deleted file mode 100644
index 9d82cb65ea56..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * PXA3xx U2D header
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __PXA310_U2D__
-#define __PXA310_U2D__
-
-#include <linux/usb/ulpi.h>
-
-struct pxa3xx_u2d_platform_data {
-
-#define ULPI_SER_6PIN (1 << 0)
-#define ULPI_SER_3PIN (1 << 1)
- unsigned int ulpi_mode;
-
- int (*init)(struct device *);
- void (*exit)(struct device *);
-};
-
-
-/* Start PXA3xx U2D host */
-int pxa3xx_u2d_start_hc(struct usb_bus *host);
-/* Stop PXA3xx U2D host */
-void pxa3xx_u2d_stop_hc(struct usb_bus *host);
-
-extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
-
-#endif /* __PXA310_U2D__ */
diff --git a/arch/arm/mach-pxa/include/mach/pxa930_rotary.h b/arch/arm/mach-pxa/include/mach/pxa930_rotary.h
deleted file mode 100644
index 053587caffdd..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxa930_rotary.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_ARCH_PXA930_ROTARY_H
-#define __ASM_ARCH_PXA930_ROTARY_H
-
-/* NOTE:
- *
- * rotary can be either interpreted as a ralative input event (e.g.
- * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN
- * or LEFT/RIGHT), depending on if up_key & down_key are assigned
- * or rel_code is assigned a non-zero value. When all are non-zero,
- * up_key and down_key will be preferred.
- */
-struct pxa930_rotary_platform_data {
- int up_key;
- int down_key;
- int rel_code;
-};
-
-void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA930_ROTARY_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa930_trkball.h b/arch/arm/mach-pxa/include/mach/pxa930_trkball.h
deleted file mode 100644
index 5e0789bc4729..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxa930_trkball.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_ARCH_PXA930_TRKBALL_H
-#define __ASM_ARCH_PXA930_TRKBALL_H
-
-struct pxa930_trkball_platform_data {
- int x_filter;
- int y_filter;
-};
-
-#endif /* __ASM_ARCH_PXA930_TRKBALL_H */
-
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
deleted file mode 100644
index 486b4c519ae2..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/pxafb.h
- *
- * Support for the xscale frame buffer.
- *
- * Author: Jean-Frederic Clere
- * Created: Sep 22, 2003
- * Copyright: jfclere@sinix.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <mach/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- * STN - for passive matrix
- * DSTN - for dual scan passive matrix
- * TFT - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit 18 : for output enable polarity
- * bit 19 : for pixel clock edge
- * bit 20 : for output pixel format when base is RGBT16
- */
-#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_MASK 0xf
-#define LCD_TYPE_UNKNOWN 0
-#define LCD_TYPE_MONO_STN 1
-#define LCD_TYPE_MONO_DSTN 2
-#define LCD_TYPE_COLOR_STN 3
-#define LCD_TYPE_COLOR_DSTN 4
-#define LCD_TYPE_COLOR_TFT 5
-#define LCD_TYPE_SMART_PANEL 6
-#define LCD_TYPE_MAX 7
-
-#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH (0 << 18)
-#define LCD_BIAS_ACTIVE_LOW (1 << 18)
-#define LCD_PCLK_EDGE_RISE (0 << 19)
-#define LCD_PCLK_EDGE_FALL (1 << 19)
-#define LCD_ALTERNATE_MAPPING (1 << 20)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
- u_long pixclock;
-
- u_short xres;
- u_short yres;
-
- u_char bpp;
- u_int cmap_greyscale:1,
- depth:8,
- transparency:1,
- unused:22;
-
- /* Parallel Mode Timing */
- u_char hsync_len;
- u_char left_margin;
- u_char right_margin;
-
- u_char vsync_len;
- u_char upper_margin;
- u_char lower_margin;
- u_char sync;
-
- /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
- * Note:
- * 1. all parameters in nanosecond (ns)
- * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
- * in pxa27x and pxa3xx, initialize them to the same value or
- * the larger one will be used
- * 3. same to {rd,wr}_pulse_width
- *
- * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
- * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
- * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
- */
- unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
- unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
- unsigned wr_pulse_width; /* L_PCLK_WR pulse width */
- unsigned rd_pulse_width; /* L_FCLK_RD pulse width */
- unsigned cmd_inh_time; /* Command Inhibit time between two writes */
- unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
- struct pxafb_mode_info *modes;
- unsigned int num_modes;
-
- unsigned int lcd_conn;
- unsigned long video_mem_size;
-
- u_int fixed_modes:1,
- cmap_inverse:1,
- cmap_static:1,
- acceleration_enabled:1,
- unused:28;
-
- /* The following should be defined in LCCR0
- * LCCR0_Act or LCCR0_Pas Active or Passive
- * LCCR0_Sngl or LCCR0_Dual Single/Dual panel
- * LCCR0_Mono or LCCR0_Color Mono/Color
- * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
- * LCCR0_DMADel(Tcpu) (optional) DMA request delay
- *
- * The following should not be defined in LCCR0:
- * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
- * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
- */
- u_int lccr0;
- /* The following should be defined in LCCR3
- * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity
- * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
- * LCCR3_Acb(X) AB Bias pin frequency
- * LCCR3_DPC (optional) Double Pixel Clock mode (untested)
- *
- * The following should not be defined in LCCR3
- * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
- */
- u_int lccr3;
- /* The following should be defined in LCCR4
- * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
- *
- * All other bits in LCCR4 should be left alone.
- */
- u_int lccr4;
- void (*pxafb_backlight_power)(int);
- void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
- void (*smart_update)(struct fb_info *);
-};
-
-void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-#ifdef CONFIG_FB_PXA_SMARTPANEL
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
-#else
-static inline int pxafb_smart_queue(struct fb_info *info,
- uint16_t *cmds, int n)
-{
- return 0;
-}
-
-static inline int pxafb_smart_flush(struct fb_info *info)
-{
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 1fb86edb857c..402874f9021f 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -42,11 +42,11 @@
#include <asm/mach/irq.h>
#include <mach/pxa300.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/littleton.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index cee9ce2fc0b5..1a63eaa89867 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -41,10 +41,10 @@
#include <mach/pxa27x.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 3c48035afd6b..553056d9a3c5 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -49,9 +49,9 @@
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/pm.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 39561dcf65f2..f7922404d941 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -38,10 +38,10 @@
#include <mach/pxa27x.h>
#include <mach/magician.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index bdc6c335830a..f27a61ee7ac7 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -47,11 +47,11 @@
#include <mach/pxa27x.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index bf99022b021f..2831308dba68 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -46,12 +46,12 @@
#include <mach/pxa27x.h>
#include <mach/regs-rtc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/audio.h>
#include <mach/smemc.h>
#include <media/soc_camera.h>
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 83570a79e7d2..d04ed4961e60 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -24,11 +24,11 @@
#include <linux/gpio.h>
#include <linux/i2c/pxa-i2c.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa320.h>
#include <mach/mxm8x10.h>
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index dad71cfa34c8..17d4c53017ca 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -29,11 +29,11 @@
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 31e0433d83ba..8bcc96e3b0db 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -35,11 +35,11 @@
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmld.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 0f6bd4fcfa3b..5ca7b904a30e 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -36,12 +36,12 @@
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmt5.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index e2d97eed07a7..ca924cfedfc0 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -34,9 +34,9 @@
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmtc.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index c054827c567f..997e6da9a9c4 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -34,11 +34,11 @@
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmte2.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index fbdebee39a53..3f3c48f2f7ce 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -35,15 +35,15 @@
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
#include <mach/palmtreo.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/asoc-palm27x.h>
+#include <linux/platform_data/camera-pxa.h>
#include <mach/palm27x.h>
#include <sound/pxa2xx-lib.h>
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 0da35dccfd89..8b4366628a12 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -40,12 +40,12 @@
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmtx.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index a97b59965bb9..8cdd4f58e253 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -40,16 +40,16 @@
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmz72.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
#include <mach/palm27x.h>
#include <mach/pm.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <media/soc_camera.h>
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index cb723e84bc27..113c57a03565 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,14 +28,14 @@
#include <media/soc_camera.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pcm990_baseboard.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 89d98c832189..2910bb935c75 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -40,11 +40,11 @@
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
#include <mach/poodle.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 4726c246dcdc..8047ee0effc5 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -30,7 +30,7 @@
#include <mach/irqs.h>
#include <mach/pxa27x.h>
#include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index f8ec85450c42..447dcbb22f6f 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -19,7 +19,7 @@
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/reset.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
void pxa2xx_clear_reset_status(unsigned int mask)
{
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index 5ead6d480c6d..7dbe3ccf1993 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -27,7 +27,7 @@
#include <mach/hardware.h>
#include <mach/regs-u2d.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
struct pxa3xx_u2d_ulpi {
struct clk *clk;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index ff9c9574ec3e..656a1bb16d14 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -28,7 +28,7 @@
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d89d87ae144c..25b08bfa997b 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -49,10 +49,10 @@
#include <asm/mach/arch.h>
#include <mach/pxa300.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 86c95a5d8533..08d87a5d2639 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -32,7 +32,7 @@
#include <asm/mach/flash.h>
#include <mach/pxa930.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index bdf4cb88ca0a..9a154bad1984 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -879,7 +879,7 @@ static const struct platform_suspend_ops sharpsl_pm_ops = {
static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
{
- int ret;
+ int ret, irq;
if (!pdev->dev.platform_data)
return -EINVAL;
@@ -907,24 +907,28 @@ static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
/* Register interrupt handlers */
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_acin);
+ if (request_irq(irq, sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock);
+ if (request_irq(irq, sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
if (sharpsl_pm.machinfo->gpio_fatal) {
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal);
+ if (request_irq(irq, sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
}
if (sharpsl_pm.machinfo->batfull_irq) {
/* Register interrupt handler. */
- if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull);
+ if (request_irq(irq, sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
}
}
@@ -953,14 +957,14 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
led_trigger_unregister_simple(sharpsl_charge_led_trigger);
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->gpio_fatal)
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->batfull_irq)
- free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
gpio_free(sharpsl_pm.machinfo->gpio_batlock);
gpio_free(sharpsl_pm.machinfo->gpio_batfull);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 363d91b44ecb..2073f0e6db0d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -41,10 +41,10 @@
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/spitz.h>
#include <mach/sharpsl_pm.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 0701ca79e7d3..456560b5aad4 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -44,7 +44,7 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 736bfdc50ee6..1a25f8a7b0ce 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -24,8 +24,8 @@
#include <asm/mach/arch.h>
#include <mach/pxa930.h>
-#include <mach/pxafb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 4d4eb60bad1e..233629edf7ee 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -42,8 +42,8 @@
#include <mach/pxa25x.h>
#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
#include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 166dd32cc1d3..fbbcbed4d1d4 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -43,10 +43,10 @@
#include <mach/pxa27x.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 130379fb9d0f..392412ce4dac 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -48,9 +48,9 @@
#include <mach/pxa25x.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/regs-uart.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include <mach/viper.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index e1740acd15f1..491b6c9a2a9b 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -33,12 +33,12 @@
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/vpac270.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
-#include <mach/pata_pxa.h>
+#include <linux/platform_data/ata-pxa.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index b9320cb8a11f..97529face7aa 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -37,9 +37,9 @@
#include <mach/pxa27x.h>
#include <mach/mfp-pxa27x.h>
#include <mach/z2.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/pm.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index af3d4f7646d7..abd3aa145083 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -38,14 +38,14 @@
#include <mach/pxa27x.h>
#include <mach/regs-uart.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/pm.h>
#include <mach/audio.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
#include <mach/zeus.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 98eec80623e3..226279fac9d4 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -26,12 +26,12 @@
#include <asm/mach/arch.h>
#include <mach/pxa3xx.h>
#include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
#include <mach/zylonite.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index f2141ae5a7de..602ca5ec52c5 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -54,4 +54,7 @@ extern void realview_init_early(void);
extern void realview_fixup(struct tag *tags, char **from,
struct meminfo *meminfo);
+extern struct smp_operations realview_smp_ops;
+extern void realview_cpu_die(unsigned int cpu);
+
#endif
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index 57d9efba2956..53818e5cd3ad 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -16,8 +16,6 @@
#include <asm/cp15.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
@@ -89,17 +87,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref realview_cpu_die(unsigned int cpu)
{
int spurious = 0;
@@ -118,12 +111,3 @@ void platform_cpu_die(unsigned int cpu)
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-realview/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 17c878ddbc70..300f7064465d 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -22,9 +22,9 @@
#include <mach/board-pb11mp.h>
#include <mach/board-pbx.h>
-#include "core.h"
+#include <plat/platsmp.h>
-extern void versatile_secondary_startup(void);
+#include "core.h"
static void __iomem *scu_base_addr(void)
{
@@ -43,7 +43,7 @@ static void __iomem *scu_base_addr(void)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init realview_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
@@ -63,7 +63,7 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base_addr());
@@ -77,3 +77,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
__raw_writel(virt_to_phys(versatile_secondary_startup),
__io_address(REALVIEW_SYS_FLAGSSET));
}
+
+struct smp_operations realview_smp_ops __initdata = {
+ .smp_init_cpus = realview_smp_init_cpus,
+ .smp_prepare_cpus = realview_smp_prepare_cpus,
+ .smp_secondary_init = versatile_secondary_init,
+ .smp_boot_secondary = versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = realview_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ec4fcd9a7e9c..7ed53d75350f 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -362,6 +362,7 @@ static void __init realview_pb11mp_init(void)
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
+ .smp = smp_ops(realview_smp_ops),
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 17954a327e1b..4f486f05108a 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -399,6 +399,7 @@ static void __init realview_pbx_init(void)
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
+ .smp = smp_ops(realview_smp_ops),
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 87e75a250d5e..3b2cf6db3634 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -37,9 +37,9 @@
#include <asm/irq.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h b/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
deleted file mode 100644
index d8a7672519b6..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - LEDs GPIO connector
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_LEDSGPIO_H
-#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
-
-#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */
-
-struct s3c24xx_led_platdata {
- unsigned int gpio;
- unsigned int flags;
-
- char *name;
- char *def_trigger;
-};
-
-#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index ea2c4b003d58..f4ad99c1e476 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -53,7 +53,7 @@
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 0c7ed7a2b0cd..1ee8c4638743 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -40,8 +40,8 @@
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -53,7 +53,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "simtec.h"
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 7a05abf1270b..00381fe5de32 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -36,8 +36,8 @@
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -47,7 +47,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 1cf1720682d3..6a30ce7e4aa7 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -45,9 +45,9 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/hwmon.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
#include <linux/mtd/mtd.h>
@@ -62,7 +62,7 @@
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "simtec.h"
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 92e1f93a6bca..4a963467b7ee 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -73,21 +73,21 @@
#include <mach/regs-gpio.h>
#include <mach/fb.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <mach/regs-mem.h>
#include <mach/hardware.h>
#include <mach/gta02.h>
#include <plat/regs-serial.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/ts.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index 7e15cc430688..63aaf076f611 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -56,8 +56,8 @@
#include <mach/h1940.h>
#include <mach/h1940-latch.h>
#include <mach/fb.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
@@ -65,8 +65,8 @@
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/pm.h>
-#include <plat/mci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <sound/uda1380.h>
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 471334715c37..c9954e26b492 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -32,8 +32,8 @@
#include <asm/mach/irq.h>
#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
@@ -54,7 +54,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
static struct map_desc jive_iodesc[] __initdata = {
};
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 734bbfe5ea22..393c0f1ac11a 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -39,14 +39,14 @@
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 383d00ca8f60..c53a9bfe1417 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -33,7 +33,7 @@
#include <asm/mach-types.h>
#include <mach/fb.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
@@ -41,15 +41,15 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
#include <plat/s3c2410.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index a71a551094ef..a2b92b0898e2 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -38,7 +38,7 @@
//#include <asm/debug-ll.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index c0fb3c1bc548..bb36d832bd3d 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -41,8 +41,8 @@
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index bc4b6efb3b27..bca39f0232b3 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -35,7 +35,7 @@
#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/cpu.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 678bbca2b5e5..7b6ba13d7285 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -47,13 +47,13 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
#include <mach/fb.h>
-#include <plat/nand.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 7ee73f27f207..379fde521d37 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -49,15 +49,15 @@
#include <plat/clock.h>
#include <plat/regs-serial.h>
#include <plat/regs-iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/irq.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <sound/uda1380.h>
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 56af35447598..dacbb9a2122a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -43,7 +43,7 @@
#include <mach/regs-lcd.h>
#include <mach/h1940.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <mach/fb.h>
#include <plat/clock.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index bdc27e772876..82796b97cb04 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -47,7 +47,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index b11451b853d8..ce99fd8bbbc5 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -38,8 +38,8 @@
#include <mach/regs-lcd.h>
#include <mach/idle.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
#include <plat/s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index c3100a044fbe..db2787aa1e5e 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -39,17 +39,17 @@
#include <mach/regs-s3c2443-clock.h>
#include <mach/idle.h>
-#include <mach/leds-gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s3c2416.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/sdhci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
#include <plat/regs-fb-v4.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 83a1036d7dcb..b7ff882c6ce6 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -37,7 +37,7 @@
#include <mach/idle.h>
#include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s3c2410.h>
#include <plat/s3c244x.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 209236956222..2568656f046f 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -37,7 +37,7 @@
#include <mach/idle.h>
#include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s3c2410.h>
#include <plat/s3c2443.h>
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index fe990289ee7d..495bf5cf52e9 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -45,7 +45,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index bd5f189f0424..14d5b12e388c 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -43,13 +43,13 @@
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "simtec.h"
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 94bfaa1fb148..f1d44ae11833 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -39,8 +39,8 @@
#include <mach/idle.h>
#include <mach/fb.h>
-#include <plat/iic.h>
-#include <plat/nand.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
diff --git a/arch/arm/mach-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c
index 9e90a7cbd1d6..7b4f33332d19 100644
--- a/arch/arm/mach-s3c24xx/setup-i2c.c
+++ b/arch/arm/mach-s3c24xx/setup-i2c.c
@@ -16,7 +16,7 @@
struct platform_device;
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c
index 11881c9a38c0..fd0ef05763a9 100644
--- a/arch/arm/mach-s3c24xx/simtec-audio.c
+++ b/arch/arm/mach-s3c24xx/simtec-audio.c
@@ -24,7 +24,7 @@
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include <plat/devs.h>
#include "simtec.h"
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index d91c1a725139..17f8356177c1 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -34,7 +34,7 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/devs.h>
#include "simtec.h"
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 124fd5d63006..35f3e07eaccc 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -20,7 +20,7 @@
#include <mach/dma.h>
#include <plat/devs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <plat/gpio-cfg.h>
static const char *rclksrc[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index ffa29ddfdfce..15c58dfc4584 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -42,7 +42,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/regs-fb-v4.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 7f4f9ebee25d..4e3fe57674c8 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -25,7 +25,7 @@
#include <sound/wm8962.h>
#include <sound/wm9081.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
#include <mach/crag6410.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index a095f7f6009d..8b4d46706645 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -61,14 +61,14 @@
#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
#include <plat/keypad.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 689088162f77..02222b32b7d3 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -34,9 +34,9 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/clock.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 5539a255a704..09311cc40115 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -38,9 +38,9 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/regs-fb-v4.h>
#include <video/platform_lcd.h>
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index cad2e05eddf7..46ee88d16815 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -37,7 +37,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/clock.h>
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 326b21604bc3..6daca203e72b 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -39,9 +39,9 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/regs-fb-v4.h>
#include <video/platform_lcd.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index ceeb1de40376..c6d7390939ae 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -30,13 +30,13 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
#include <plat/regs-serial.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/sdhci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index b0f4525c66bd..a928fae5694e 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -35,7 +35,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 0fe4f1503f4f..2547a8846472 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -60,8 +60,8 @@
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
@@ -69,7 +69,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/keypad.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index 241af94a9e70..40666ba8d607 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,7 +18,7 @@
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 3d13a961986d..3fdb24c4e62a 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,7 +18,7 @@
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c
index 41b425602d88..648d8b85bf6b 100644
--- a/arch/arm/mach-s3c64xx/setup-ide.c
+++ b/arch/arm/mach-s3c64xx/setup-ide.c
@@ -17,7 +17,7 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
void s3c64xx_ide_setup_gpio(void)
{
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
index 91113ddc51da..a0d6edfd23a0 100644
--- a/arch/arm/mach-s5p64x0/dev-audio.c
+++ b/arch/arm/mach-s5p64x0/dev-audio.c
@@ -13,7 +13,7 @@
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 92fefad505cc..dea78a848244 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -45,10 +45,10 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pll.h>
#include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index e2335ecf6eae..6f14fc729b8f 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -45,10 +45,10 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pll.h>
#include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
index 46b463917c54..a32edc545e6c 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -19,7 +19,7 @@
struct platform_device; /* don't need the contents */
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/i2c.h>
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
index 6ad3b986021c..ca2c5c7f8aa6 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -19,7 +19,7 @@
struct platform_device; /* don't need the contents */
#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/i2c.h>
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index 9d4bde3f1110..1cc252cef268 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -13,7 +13,7 @@
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 0c3ae38d27ca..5d2c0934928b 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -44,12 +44,12 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
-#include <plat/iic.h>
-#include <plat/ata.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
#include <plat/adc.h>
#include <plat/keypad.h>
-#include <plat/ts.h>
-#include <plat/audio.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c
index eaef7a3bda49..89a6a769d622 100644
--- a/arch/arm/mach-s5pc100/setup-i2c0.c
+++ b/arch/arm/mach-s5pc100/setup-i2c0.c
@@ -18,7 +18,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c
index aaff74a90dee..faa667ef02cb 100644
--- a/arch/arm/mach-s5pc100/setup-i2c1.c
+++ b/arch/arm/mach-s5pc100/setup-i2c1.c
@@ -18,7 +18,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 8367749c3eec..0a5480bbcbd5 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -13,7 +13,7 @@
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 822a55950685..00f1e47d490a 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -43,7 +43,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index dfc29236321c..d9c99fcc1aa7 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -27,8 +27,8 @@
#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
#include <plat/s5p-time.h>
#include <plat/mfc.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 918b23d71fdf..7d6fab420508 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -38,9 +38,9 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 74e99bc0dc9b..18785cb5e1ef 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -26,7 +26,7 @@
#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/s5p-time.h>
#include "common.h"
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index 0f1cc3a1c1e8..4a15849766c0 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -18,7 +18,7 @@
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
index f61365a34c56..4777f6b97a92 100644
--- a/arch/arm/mach-s5pv210/setup-i2c1.c
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -18,7 +18,7 @@
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
index 2f91b5cefbc6..bbce6c74b915 100644
--- a/arch/arm/mach-s5pv210/setup-i2c2.c
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -18,7 +18,7 @@
struct platform_device; /* don't need the contents */
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 1710ed1a0ac0..e1ccda6128eb 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -39,7 +39,7 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <mach/assabet.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 5240f104a3cd..ad0eb08ea077 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -30,7 +30,7 @@
#include <asm/mach/serial_sa1100.h>
#include <mach/cerf.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index ea5cff38745c..170cb6107f68 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -45,7 +45,7 @@
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
deleted file mode 100644
index 4b2860ae3828..000000000000
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/mcp.h
- *
- * Copyright (C) 2005 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ARCH_MCP_H
-#define __ASM_ARM_ARCH_MCP_H
-
-#include <linux/types.h>
-
-struct mcp_plat_data {
- u32 mccr0;
- u32 mccr1;
- unsigned int sclk_rate;
- void *codec_pdata;
-};
-
-#endif
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index b2ce04bf4c9b..3048b17e84c5 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -19,7 +19,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 5d33fc3108ef..ff6b7b35bca9 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -19,7 +19,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/shannon.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 6ca92d0d32b2..71790e581d93 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -24,7 +24,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/simpad.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 5e410192ffb8..498efd99338d 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -7,7 +7,3 @@ __ZRELADDR := $(shell /bin/bash -c 'printf "0x%08x" \
#
#params_phys-y (Instead: Pass atags pointer in r2)
#initrd_phys-y (Instead: Use compiled-in initramfs)
-
-dtb-$(CONFIG_MACH_KZM9G) += sh73a0-kzm9g.dtb
-dtb-$(CONFIG_MACH_KZM9D) += emev2-kzm9d.dtb
-dtb-$(CONFIG_MACH_ARMADILLO800EVA) += r8a7740-armadillo800eva.dtb
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index cfc3b5c43ba8..25eb88a923e6 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -649,6 +649,7 @@ static void __init ag5evm_init(void)
}
MACHINE_START(AG5EVM, "ag5evm")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 1089ee5472eb..bc3b5da59e25 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -66,6 +66,8 @@
#include <asm/mach/arch.h>
#include <asm/setup.h>
+#include "sh-gpio.h"
+
/*
* Address Interface BusWidth note
* ------------------------------------------------------------------
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 9615a78d30b2..c6593d394273 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -55,6 +55,8 @@
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
+#include "sh-gpio.h"
+
/*
* CON1 Camera Module
* CON2 Extension Bus
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 22d689322533..35c126caa4d8 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -42,6 +42,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "sh-gpio.h"
+
/*
* SDHI
*
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 21dbe54304d5..bf88f9a8b7ac 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -545,6 +545,7 @@ static void __init kota2_init(void)
}
MACHINE_START(KOTA2, "kota2")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 2c986eaae7b4..b52bc0d1273f 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -84,6 +84,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = {
};
DT_MACHINE_START(KZM9D_DT, "kzm9d")
+ .smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
.init_early = emev2_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 1a413f07c8c4..773a2b95a4e0 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -776,6 +776,7 @@ static const char *kzm9g_boards_compat_dt[] __initdata = {
};
DT_MACHINE_START(KZM9G_DT, "kzm9g")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 0dce90ee6cf2..62783b5d8813 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -64,6 +64,8 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include "sh-gpio.h"
+
/*
* Address Interface BusWidth note
* ------------------------------------------------------------------
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 4834bdd849cf..b8a7525a4e2f 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -168,6 +168,7 @@ static void __init marzen_init(void)
}
MACHINE_START(MARZEN, "marzen")
+ .smp = smp_ops(r8a7779_smp_ops),
.map_io = r8a7779_map_io,
.init_early = r8a7779_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
diff --git a/arch/arm/mach-shmobile/hotplug.c b/arch/arm/mach-shmobile/hotplug.c
index 828d22f3af57..b09a0bdbf813 100644
--- a/arch/arm/mach-shmobile/hotplug.c
+++ b/arch/arm/mach-shmobile/hotplug.c
@@ -14,30 +14,16 @@
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/delay.h>
+#include <linux/of.h>
#include <mach/common.h>
+#include <mach/r8a7779.h>
+#include <mach/emev2.h>
#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
static cpumask_t dead_cpus;
-int platform_cpu_kill(unsigned int cpu)
-{
- int k;
-
- /* this function is running on another CPU than the offline target,
- * here we need wait for shutdown code in platform_cpu_die() to
- * finish before asking SoC-specific code to power off the CPU core.
- */
- for (k = 0; k < 1000; k++) {
- if (cpumask_test_cpu(cpu, &dead_cpus))
- return shmobile_platform_cpu_kill(cpu);
-
- mdelay(1);
- }
-
- return 0;
-}
-
-void platform_cpu_die(unsigned int cpu)
+void shmobile_cpu_die(unsigned int cpu)
{
/* hardware shutdown code running on the CPU that is being offlined */
flush_cache_all();
@@ -60,7 +46,7 @@ void platform_cpu_die(unsigned int cpu)
}
}
-int platform_cpu_disable(unsigned int cpu)
+int shmobile_cpu_disable(unsigned int cpu)
{
cpumask_clear_cpu(cpu, &dead_cpus);
/*
@@ -69,3 +55,8 @@ int platform_cpu_disable(unsigned int cpu)
*/
return cpu == 0 ? -EPERM : 0;
}
+
+int shmobile_cpu_is_dead(unsigned int cpu)
+{
+ return cpumask_test_cpu(cpu, &dead_cpus);
+}
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 45e61dada030..f80f9c549393 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -4,11 +4,10 @@
extern void shmobile_earlytimer_init(void);
extern struct sys_timer shmobile_timer;
extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
- unsigned int mult, unsigned int div);
+ unsigned int mult, unsigned int div);
struct twd_local_timer;
extern void shmobile_setup_console(void);
extern void shmobile_secondary_vector(void);
-extern int shmobile_platform_cpu_kill(unsigned int cpu);
struct clk;
extern int shmobile_clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
@@ -58,11 +57,6 @@ extern struct clk sh73a0_extal2_clk;
extern struct clk sh73a0_extcki_clk;
extern struct clk sh73a0_extalr_clk;
-extern unsigned int sh73a0_get_core_count(void);
-extern void sh73a0_secondary_init(unsigned int cpu);
-extern int sh73a0_boot_secondary(unsigned int cpu);
-extern void sh73a0_smp_prepare_cpus(void);
-
extern void r8a7740_init_irq(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
@@ -79,11 +73,6 @@ extern void r8a7779_pinmux_init(void);
extern void r8a7779_pm_init(void);
extern void r8a7740_meram_workaround(void);
-extern unsigned int r8a7779_get_core_count(void);
-extern int r8a7779_platform_cpu_kill(unsigned int cpu);
-extern void r8a7779_secondary_init(unsigned int cpu);
-extern int r8a7779_boot_secondary(unsigned int cpu);
-extern void r8a7779_smp_prepare_cpus(void);
extern void r8a7779_register_twd(void);
extern void shmobile_init_late(void);
@@ -100,4 +89,15 @@ int shmobile_cpuidle_init(void);
static inline int shmobile_cpuidle_init(void) { return 0; }
#endif
+extern void shmobile_cpu_die(unsigned int cpu);
+extern int shmobile_cpu_disable(unsigned int cpu);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int shmobile_cpu_is_dead(unsigned int cpu);
+#else
+static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; }
+#endif
+
+extern void shmobile_smp_init_cpus(unsigned int ncores);
+
#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index e6b0c1bf4b7e..ac3751705cab 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -7,13 +7,10 @@ extern void emev2_add_early_devices(void);
extern void emev2_add_standard_devices(void);
extern void emev2_clock_init(void);
extern void emev2_set_boot_vector(unsigned long value);
-extern unsigned int emev2_get_core_count(void);
-extern int emev2_platform_cpu_kill(unsigned int cpu);
-extern void emev2_secondary_init(unsigned int cpu);
-extern int emev2_boot_secondary(unsigned int cpu);
-extern void emev2_smp_prepare_cpus(void);
#define EMEV2_GPIO_BASE 200
#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
+extern struct smp_operations emev2_smp_ops;
+
#endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index b07ad318eb2e..f504c5e81b47 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -360,4 +360,6 @@ extern void r8a7779_add_device_to_domain(struct r8a7779_pm_domain *r8a7779_pd,
#define r8a7779_add_device_to_domain(pd, pdev) do { } while (0)
#endif /* CONFIG_PM */
+extern struct smp_operations r8a7779_smp_ops;
+
#endif /* __ASM_R8A7779_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index fe950f25d793..606d31d02a4e 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -557,4 +557,6 @@ enum {
#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
+extern struct smp_operations sh73a0_smp_ops;
+
#endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/pfc-r8a7740.c b/arch/arm/mach-shmobile/pfc-r8a7740.c
index ce9e7fa5cc8a..134d1b9a8821 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7740.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7740.c
@@ -20,7 +20,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/r8a7740.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index d14c9b048077..cbc26ba2a0a2 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -19,7 +19,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <linux/ioport.h>
#include <mach/r8a7779.h>
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
index e6e524654e67..c0c137f39052 100644
--- a/arch/arm/mach-shmobile/pfc-sh7367.c
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -18,7 +18,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh7367.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 336093f9210a..7a1525fd6ada 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -22,7 +22,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/irqs.h>
#include <mach/sh7372.h>
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
index 2f10511946ad..f3117f67fa25 100644
--- a/arch/arm/mach-shmobile/pfc-sh7377.c
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -19,7 +19,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh7377.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index 4a547b803268..b442f9d8c716 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -20,7 +20,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh73a0.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index fde0d23121dc..ed8d2351915e 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -11,100 +11,11 @@
* published by the Free Software Foundation.
*/
#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/of.h>
#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/emev2.h>
-#ifdef CONFIG_ARCH_SH73A0
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
- of_machine_is_compatible("renesas,sh73a0"))
-#else
-#define is_sh73a0() (0)
-#endif
-
-#define is_r8a7779() machine_is_marzen()
-
-#ifdef CONFIG_ARCH_EMEV2
-#define is_emev2() of_machine_is_compatible("renesas,emev2")
-#else
-#define is_emev2() (0)
-#endif
-
-static unsigned int __init shmobile_smp_get_core_count(void)
-{
- if (is_sh73a0())
- return sh73a0_get_core_count();
-
- if (is_r8a7779())
- return r8a7779_get_core_count();
-
- if (is_emev2())
- return emev2_get_core_count();
-
- return 1;
-}
-
-static void __init shmobile_smp_prepare_cpus(void)
-{
- if (is_sh73a0())
- sh73a0_smp_prepare_cpus();
-
- if (is_r8a7779())
- r8a7779_smp_prepare_cpus();
-
- if (is_emev2())
- emev2_smp_prepare_cpus();
-}
-
-int shmobile_platform_cpu_kill(unsigned int cpu)
-{
- if (is_r8a7779())
- return r8a7779_platform_cpu_kill(cpu);
-
- if (is_emev2())
- return emev2_platform_cpu_kill(cpu);
-
- return 1;
-}
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void __init shmobile_smp_init_cpus(unsigned int ncores)
{
- trace_hardirqs_off();
-
- if (is_sh73a0())
- sh73a0_secondary_init(cpu);
-
- if (is_r8a7779())
- r8a7779_secondary_init(cpu);
-
- if (is_emev2())
- emev2_secondary_init(cpu);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- if (is_sh73a0())
- return sh73a0_boot_secondary(cpu);
-
- if (is_r8a7779())
- return r8a7779_boot_secondary(cpu);
-
- if (is_emev2())
- return emev2_boot_secondary(cpu);
-
- return -ENOSYS;
-}
-
-void __init smp_init_cpus(void)
-{
- unsigned int ncores = shmobile_smp_get_core_count();
unsigned int i;
if (ncores > nr_cpu_ids) {
@@ -118,8 +29,3 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
- shmobile_smp_prepare_cpus();
-}
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 61446f30e397..a47beeb18283 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -461,6 +461,7 @@ void __init emev2_init_irq_dt(void)
}
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
+ .smp = smp_ops(emev2_smp_ops),
.init_early = emev2_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = emev2_init_irq_dt,
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/sh-gpio.h
index 90a92b2c1c52..e834763ac2a5 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/sh-gpio.h
@@ -12,22 +12,8 @@
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/sh_pfc.h>
#include <linux/io.h>
-#ifdef CONFIG_GPIOLIB
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- return -ENOSYS;
-}
-
-#else
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#endif /* CONFIG_GPIOLIB */
-
/*
* FIXME !!
*
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 6a35c4a31e6c..f978c5d0e1ae 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -50,7 +50,7 @@ static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
}
-unsigned int __init emev2_get_core_count(void)
+static unsigned int __init emev2_get_core_count(void)
{
if (!scu_base) {
scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
@@ -62,17 +62,35 @@ unsigned int __init emev2_get_core_count(void)
return scu_base ? scu_get_core_count(scu_base) : 1;
}
-int emev2_platform_cpu_kill(unsigned int cpu)
+static int emev2_platform_cpu_kill(unsigned int cpu)
{
return 0; /* not supported yet */
}
-void __cpuinit emev2_secondary_init(unsigned int cpu)
+static int __maybe_unused emev2_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (shmobile_cpu_is_dead(cpu))
+ return emev2_platform_cpu_kill(cpu);
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+
+static void __cpuinit emev2_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit emev2_boot_secondary(unsigned int cpu)
+static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
@@ -86,7 +104,7 @@ int __cpuinit emev2_boot_secondary(unsigned int cpu)
return 0;
}
-void __init emev2_smp_prepare_cpus(void)
+static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu = cpu_logical_map(0);
@@ -95,3 +113,22 @@ void __init emev2_smp_prepare_cpus(void)
/* enable cache coherency on CPU0 */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
}
+
+static void __init emev2_smp_init_cpus(void)
+{
+ unsigned int ncores = emev2_get_core_count();
+
+ shmobile_smp_init_cpus(ncores);
+}
+
+struct smp_operations emev2_smp_ops __initdata = {
+ .smp_init_cpus = emev2_smp_init_cpus,
+ .smp_prepare_cpus = emev2_smp_prepare_cpus,
+ .smp_secondary_init = emev2_secondary_init,
+ .smp_boot_secondary = emev2_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = emev2_cpu_kill,
+ .cpu_die = shmobile_cpu_die,
+ .cpu_disable = shmobile_cpu_disable,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 6d1d0238cbf7..2ce6af9a6a37 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -87,14 +87,14 @@ static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
__raw_writel(tmp, scu_base + 8);
}
-unsigned int __init r8a7779_get_core_count(void)
+static unsigned int __init r8a7779_get_core_count(void)
{
void __iomem *scu_base = scu_base_addr();
return scu_get_core_count(scu_base);
}
-int r8a7779_platform_cpu_kill(unsigned int cpu)
+static int r8a7779_platform_cpu_kill(unsigned int cpu)
{
struct r8a7779_pm_ch *ch = NULL;
int ret = -EIO;
@@ -113,12 +113,31 @@ int r8a7779_platform_cpu_kill(unsigned int cpu)
return ret ? ret : 1;
}
-void __cpuinit r8a7779_secondary_init(unsigned int cpu)
+static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (shmobile_cpu_is_dead(cpu))
+ return r8a7779_platform_cpu_kill(cpu);
+
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+
+static void __cpuinit r8a7779_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit r8a7779_boot_secondary(unsigned int cpu)
+static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
struct r8a7779_pm_ch *ch = NULL;
int ret = -EIO;
@@ -137,7 +156,7 @@ int __cpuinit r8a7779_boot_secondary(unsigned int cpu)
return ret;
}
-void __init r8a7779_smp_prepare_cpus(void)
+static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu = cpu_logical_map(0);
@@ -156,3 +175,22 @@ void __init r8a7779_smp_prepare_cpus(void)
r8a7779_platform_cpu_kill(2);
r8a7779_platform_cpu_kill(3);
}
+
+static void __init r8a7779_smp_init_cpus(void)
+{
+ unsigned int ncores = r8a7779_get_core_count();
+
+ shmobile_smp_init_cpus(ncores);
+}
+
+struct smp_operations r8a7779_smp_ops __initdata = {
+ .smp_init_cpus = r8a7779_smp_init_cpus,
+ .smp_prepare_cpus = r8a7779_smp_prepare_cpus,
+ .smp_secondary_init = r8a7779_secondary_init,
+ .smp_boot_secondary = r8a7779_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = r8a7779_cpu_kill,
+ .cpu_die = shmobile_cpu_die,
+ .cpu_disable = shmobile_cpu_disable,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index e36c41c4ab40..624f00f70abf 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -22,8 +22,10 @@
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/common.h>
#include <asm/smp_plat.h>
+#include <mach/sh73a0.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
#include <asm/hardware/gic.h>
@@ -64,19 +66,19 @@ static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
__raw_writel(tmp, scu_base + 8);
}
-unsigned int __init sh73a0_get_core_count(void)
+static unsigned int __init sh73a0_get_core_count(void)
{
void __iomem *scu_base = scu_base_addr();
return scu_get_core_count(scu_base);
}
-void __cpuinit sh73a0_secondary_init(unsigned int cpu)
+static void __cpuinit sh73a0_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
-int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
+static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
@@ -91,7 +93,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
return 0;
}
-void __init sh73a0_smp_prepare_cpus(void)
+static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu = cpu_logical_map(0);
@@ -104,3 +106,41 @@ void __init sh73a0_smp_prepare_cpus(void)
/* enable cache coherency on CPU0 */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
}
+
+static void __init sh73a0_smp_init_cpus(void)
+{
+ unsigned int ncores = sh73a0_get_core_count();
+
+ shmobile_smp_init_cpus(ncores);
+}
+
+static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (shmobile_cpu_is_dead(cpu))
+ return 1;
+
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+
+struct smp_operations sh73a0_smp_ops __initdata = {
+ .smp_init_cpus = sh73a0_smp_init_cpus,
+ .smp_prepare_cpus = sh73a0_smp_prepare_cpus,
+ .smp_secondary_init = sh73a0_secondary_init,
+ .smp_boot_secondary = sh73a0_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = sh73a0_cpu_kill,
+ .cpu_die = shmobile_cpu_die,
+ .cpu_disable = shmobile_cpu_disable,
+#endif
+};
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
new file mode 100644
index 000000000000..803a3281feb5
--- /dev/null
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -0,0 +1,16 @@
+config ARCH_SOCFPGA
+ bool "Altera SOCFPGA family" if ARCH_MULTI_V7
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select CACHE_L2X0
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V7
+ select DW_APB_TIMER
+ select DW_APB_TIMER_OF
+ select GENERIC_CLOCKEVENTS
+ select GPIO_PL061 if GPIOLIB
+ select HAVE_ARM_SCU
+ select SPARSE_IRQ
+ select USE_OF
diff --git a/arch/arm/mach-socfpga/Makefile.boot b/arch/arm/mach-socfpga/Makefile.boot
deleted file mode 100644
index dae9661a7689..000000000000
--- a/arch/arm/mach-socfpga/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-socfpga/include/mach/timex.h b/arch/arm/mach-socfpga/include/mach/timex.h
deleted file mode 100644
index 43df4354e461..000000000000
--- a/arch/arm/mach-socfpga/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-socfpga/include/mach/uncompress.h b/arch/arm/mach-socfpga/include/mach/uncompress.h
deleted file mode 100644
index bbe20e696325..000000000000
--- a/arch/arm/mach-socfpga/include/mach/uncompress.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot
index 403efd7e6d27..4674a4c221db 100644
--- a/arch/arm/mach-spear13xx/Makefile.boot
+++ b/arch/arm/mach-spear13xx/Makefile.boot
@@ -1,6 +1,3 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb
diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear13xx/hotplug.c
index 5c6867b46d09..a7d2dd11a4f2 100644
--- a/arch/arm/mach-spear13xx/hotplug.c
+++ b/arch/arm/mach-spear13xx/hotplug.c
@@ -17,8 +17,6 @@
#include <asm/cp15.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
@@ -56,7 +54,7 @@ static inline void cpu_leave_lowpower(void)
: "cc");
}
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
{
for (;;) {
wfi();
@@ -79,17 +77,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void __cpuinit platform_cpu_die(unsigned int cpu)
+void __ref spear13xx_cpu_die(unsigned int cpu)
{
int spurious = 0;
@@ -97,7 +90,7 @@ void __cpuinit platform_cpu_die(unsigned int cpu)
* we're ready for shutdown now, so do it
*/
cpu_enter_lowpower();
- platform_do_lowpower(cpu, &spurious);
+ spear13xx_do_lowpower(cpu, &spurious);
/*
* bring this CPU back into the world of cache
@@ -108,12 +101,3 @@ void __cpuinit platform_cpu_die(unsigned int cpu)
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
index dac57fd0cdfd..c33f4d9361bd 100644
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -33,6 +33,9 @@ void __init spear13xx_l2x0_init(void);
bool dw_dma_filter(struct dma_chan *chan, void *slave);
void spear_restart(char, const char *);
void spear13xx_secondary_startup(void);
+void __cpuinit spear13xx_cpu_die(unsigned int cpu);
+
+extern struct smp_operations spear13xx_smp_ops;
#ifdef CONFIG_MACH_SPEAR1310
void __init spear1310_clk_init(void);
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
deleted file mode 100644
index 85f176311f63..000000000000
--- a/arch/arm/mach-spear13xx/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c
index f5d07f2663d7..2eaa3fa7b432 100644
--- a/arch/arm/mach-spear13xx/platsmp.c
+++ b/arch/arm/mach-spear13xx/platsmp.c
@@ -19,18 +19,13 @@
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/spear.h>
+#include <mach/generic.h>
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
static DEFINE_SPINLOCK(boot_lock);
static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
-extern void spear13xx_secondary_startup(void);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit spear13xx_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@@ -53,7 +48,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
@@ -97,7 +92,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init spear13xx_smp_init_cpus(void)
{
unsigned int i, ncores = scu_get_core_count(scu_base);
@@ -113,7 +108,7 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base);
@@ -125,3 +120,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
*/
__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
}
+
+struct smp_operations spear13xx_smp_ops __initdata = {
+ .smp_init_cpus = spear13xx_smp_init_cpus,
+ .smp_prepare_cpus = spear13xx_smp_prepare_cpus,
+ .smp_secondary_init = spear13xx_secondary_init,
+ .smp_boot_secondary = spear13xx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = spear13xx_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index 732d29bc7330..9fbbfc5650aa 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -78,6 +78,7 @@ static void __init spear1310_map_io(void)
}
DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+ .smp = smp_ops(spear13xx_smp_ops),
.map_io = spear1310_map_io,
.init_irq = spear13xx_dt_init_irq,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index 81e4ed76ad06..081014fb314a 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -182,6 +182,7 @@ static const char * const spear1340_dt_board_compat[] = {
};
DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+ .smp = smp_ops(spear13xx_smp_ops),
.map_io = spear13xx_map_io,
.init_irq = spear13xx_dt_init_irq,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot
index d93e2177e6ec..4674a4c221db 100644
--- a/arch/arm/mach-spear3xx/Makefile.boot
+++ b/arch/arm/mach-spear3xx/Makefile.boot
@@ -1,7 +1,3 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb
diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h
deleted file mode 100644
index 2ac74c6db7f1..000000000000
--- a/arch/arm/mach-spear3xx/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot
index af493da37ab6..4674a4c221db 100644
--- a/arch/arm/mach-spear6xx/Makefile.boot
+++ b/arch/arm/mach-spear6xx/Makefile.boot
@@ -1,5 +1,3 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb
diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h
deleted file mode 100644
index d42cefc0356d..000000000000
--- a/arch/arm/mach-spear6xx/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 54c16aade475..29433816233c 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -1,15 +1,3 @@
zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
-
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom-wide.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-tec.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index c3394443675e..57e235f4ac74 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -45,6 +45,7 @@
#include "board.h"
#include "clock.h"
+#include "common.h"
struct tegra_ehci_platform_data tegra_ehci1_pdata = {
.operating_mode = TEGRA_USB_OTG,
@@ -177,6 +178,7 @@ static const char *tegra20_dt_board_compat[] = {
DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
.map_io = tegra_map_common_io,
+ .smp = smp_ops(tegra_smp_ops),
.init_early = tegra20_init_early,
.init_irq = tegra_dt_init_irq,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 53bf60f11580..e4a676d4ddf7 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -37,6 +37,7 @@
#include "board.h"
#include "clock.h"
+#include "common.h"
struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
@@ -83,6 +84,7 @@ static const char *tegra30_dt_board_compat[] = {
};
DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
+ .smp = smp_ops(tegra_smp_ops),
.map_io = tegra_map_common_io,
.init_early = tegra30_init_early,
.init_irq = tegra_dt_init_irq,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 59305516fadb..740e16f64728 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -19,7 +19,7 @@
#include <linux/platform_device.h>
#include <linux/rfkill-gpio.h>
-
+#include "board.h"
#include "board-paz00.h"
static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 0560538bf598..0b0a5f556d34 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -31,6 +31,7 @@
#include "board.h"
#include "clock.h"
+#include "common.h"
#include "fuse.h"
#include "pmc.h"
#include "apbio.h"
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
new file mode 100644
index 000000000000..02f71b4f1e51
--- /dev/null
+++ b/arch/arm/mach-tegra/common.h
@@ -0,0 +1,4 @@
+extern struct smp_operations tegra_smp_ops;
+
+extern void tegra_cpu_die(unsigned int cpu);
+extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index d02a35476135..dca5141a2c31 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -19,17 +19,12 @@
static void (*tegra_hotplug_shutdown)(void);
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref tegra_cpu_die(unsigned int cpu)
{
cpu = cpu_logical_map(cpu);
@@ -47,7 +42,7 @@ void platform_cpu_die(unsigned int cpu)
BUG();
}
-int platform_cpu_disable(unsigned int cpu)
+int tegra_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-tegra/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-tegra/include/mach/sdhci.h b/arch/arm/mach-tegra/include/mach/sdhci.h
deleted file mode 100644
index 4231bc7b8652..000000000000
--- a/arch/arm/mach-tegra/include/mach/sdhci.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-arm/arch-tegra/include/mach/sdhci.h
- *
- * Copyright (C) 2009 Palm, Inc.
- * Author: Yvonne Yip <y@palm.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARM_ARCH_TEGRA_SDHCI_H
-#define __ASM_ARM_ARCH_TEGRA_SDHCI_H
-
-#include <linux/mmc/host.h>
-
-struct tegra_sdhci_platform_data {
- int cd_gpio;
- int wp_gpio;
- int power_gpio;
- int is_8bit;
- int pm_flags;
-};
-
-#endif
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 96ed1718eef0..81cb26591acf 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -33,6 +33,8 @@
#include "reset.h"
#include "tegra_cpu_car.h"
+#include "common.h"
+
extern void tegra_secondary_startup(void);
static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
@@ -40,7 +42,7 @@ static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
#define EVP_CPU_RESET_VECTOR \
(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit tegra_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@@ -100,7 +102,7 @@ static int tegra30_power_up_cpu(unsigned int cpu)
return 0;
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int status;
@@ -146,7 +148,7 @@ done:
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init tegra_smp_init_cpus(void)
{
unsigned int i, ncores = scu_get_core_count(scu_base);
@@ -162,8 +164,19 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
{
tegra_cpu_reset_handler_init();
scu_enable(scu_base);
}
+
+struct smp_operations tegra_smp_ops __initdata = {
+ .smp_init_cpus = tegra_smp_init_cpus,
+ .smp_prepare_cpus = tegra_smp_prepare_cpus,
+ .smp_secondary_init = tegra_secondary_init,
+ .smp_boot_secondary = tegra_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = tegra_cpu_die,
+ .cpu_disable = tegra_cpu_disable,
+#endif
+};
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
index dd5cd00e2554..760a0efe7580 100644
--- a/arch/arm/mach-ux500/Makefile.boot
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -1,5 +1,3 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
-dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 074791306c99..416d436111f2 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -49,7 +49,7 @@
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/irqs.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
#include "ste-dma40-db8500.h"
#include "devices-db8500.h"
@@ -691,6 +691,7 @@ static void __init hrefv60_init_machine(void)
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
.atag_offset = 0x100,
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
@@ -702,6 +703,7 @@ MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.atag_offset = 0x100,
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
@@ -712,6 +714,7 @@ MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.atag_offset = 0x100,
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
@@ -839,6 +842,7 @@ static const char * u8500_dt_board_compat[] = {
DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+ .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 27a397f5a42c..bcdfe6b1d453 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -24,7 +24,7 @@
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/db8500-regs.h>
#include "devices-db8500.h"
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index ecdd8386cffb..7fbf0ba336e1 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -13,7 +13,7 @@
#include <linux/sys_soc.h>
#include <linux/amba/bus.h>
#include <linux/platform_data/i2c-nomadik.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
struct spi_master_cntlr;
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index c76f0f456f04..2f6af259015d 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -15,13 +15,18 @@
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-extern volatile int pen_release;
+#include <mach/setup.h>
-static inline void platform_do_lowpower(unsigned int cpu)
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref ux500_cpu_die(unsigned int cpu)
{
flush_cache_all();
- /* we put the platform to just WFI */
+ /* directly enter low power state, skipping secure registers */
for (;;) {
__asm__ __volatile__("dsb\n\t" "wfi\n\t"
: : : "memory");
@@ -33,28 +38,3 @@ static inline void platform_do_lowpower(unsigned int cpu)
}
}
}
-
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
- /* directly enter low power state, skipping secure registers */
- platform_do_lowpower(cpu);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-ux500/include/mach/crypto-ux500.h b/arch/arm/mach-ux500/include/mach/crypto-ux500.h
deleted file mode 100644
index 5b2d0817e26a..000000000000
--- a/arch/arm/mach-ux500/include/mach/crypto-ux500.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef _CRYPTO_UX500_H
-#define _CRYPTO_UX500_H
-#include <linux/dmaengine.h>
-#include <plat/ste_dma40.h>
-
-struct hash_platform_data {
- void *mem_to_engine;
- bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-};
-
-struct cryp_platform_data {
- struct stedma40_chan_cfg mem_to_engine;
- struct stedma40_chan_cfg engine_to_mem;
-};
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
deleted file mode 100644
index c01ef66537f3..000000000000
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 7914e5eaa9c7..6be4c4d2ab88 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -45,4 +45,7 @@ extern struct sys_timer ux500_timer;
.type = MT_MEMORY, \
}
+extern struct smp_operations ux500_smp_ops;
+extern void ux500_cpu_die(unsigned int cpu);
+
#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
deleted file mode 100644
index 4c1cc50a595a..000000000000
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-#include <linux/dmaengine.h>
-
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
-
-struct ux500_musb_board_data {
- void **dma_rx_param_array;
- void **dma_tx_param_array;
- u32 num_rx_channels;
- u32 num_tx_channels;
- bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-};
-
-void ux500_add_usb(struct device *parent, resource_size_t base,
- int irq, int *dma_rx_cfg, int *dma_tx_cfg);
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index a5dda68444db..3db7782f3afb 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -28,12 +28,6 @@
extern void u8500_secondary_startup(void);
/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int pen_release = -1;
-
-/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
* or not. This is necessary for the hotplug code to work reliably.
@@ -58,7 +52,7 @@ static void __iomem *scu_base_addr(void)
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit ux500_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@@ -80,7 +74,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
@@ -145,7 +139,7 @@ static void __init wakeup_secondary(void)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init ux500_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
@@ -165,9 +159,19 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base_addr());
wakeup_secondary();
}
+
+struct smp_operations ux500_smp_ops __initdata = {
+ .smp_init_cpus = ux500_smp_init_cpus,
+ .smp_prepare_cpus = ux500_smp_prepare_cpus,
+ .smp_secondary_init = ux500_secondary_init,
+ .smp_boot_secondary = ux500_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = ux500_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index a74af389bc63..145482e74418 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -10,7 +10,7 @@
#include <plat/ste_dma40.h>
#include <mach/hardware.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-versatile/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index fc3730f01650..c95296066203 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,38 +1,23 @@
-menu "Versatile Express platform type"
- depends on ARCH_VEXPRESS
-
-config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
- bool "Enable A5 and A9 only errata work-arounds"
- default y
- select ARM_ERRATA_720789
- select ARM_ERRATA_751472
- select PL310_ERRATA_753970 if CACHE_PL310
- help
- Provides common dependencies for Versatile Express platforms
- based on Cortex-A5 and Cortex-A9 processors. In order to
- build a working kernel, you must also enable relevant core
- tile support or Flattened Device Tree based support options.
-
-config ARCH_VEXPRESS_CA9X4
- bool "Versatile Express Cortex-A9x4 tile"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
-
-config ARCH_VEXPRESS_DT
- bool "Device Tree support for Versatile Express platforms"
+config ARCH_VEXPRESS
+ bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
select ARM_GIC
- select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR
+ select ARM_TIMER_SP804
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select HAVE_PATA_PLATFORM
select HAVE_SMP
+ select ICST
select MIGHT_HAVE_CACHE_L2X0
- select USE_OF
+ select NO_IOPORT
+ select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLCD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
- New Versatile Express platforms require Flattened Device Tree to
- be passed to the kernel.
-
This option enables support for systems using Cortex processor based
ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
for example:
@@ -48,7 +33,22 @@ config ARCH_VEXPRESS_DT
platforms. The traditional (ATAGs) boot method is not usable on
these boards with this option.
- If your bootloader supports Flattened Device Tree based booting,
- say Y here.
+menu "Versatile Express platform type"
+ depends on ARCH_VEXPRESS
+
+config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+ bool "Enable A5 and A9 only errata work-arounds"
+ default y
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_751472
+ select PL310_ERRATA_753970 if CACHE_PL310
+ help
+ Provides common dependencies for Versatile Express platforms
+ based on Cortex-A5 and Cortex-A9 processors. In order to
+ build a working kernel, you must also enable relevant core
+ tile support or Flattened Device Tree based support options.
+
+config ARCH_VEXPRESS_CA9X4
+ bool "Versatile Express Cortex-A9x4 tile"
endmenu
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 90551b9780ab..42703e8b4d3b 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -1,6 +1,8 @@
#
# Makefile for the linux kernel.
#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+ -I$(srctree)/arch/arm/plat-versatile/include
obj-y := v2m.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
deleted file mode 100644
index 318d308dfb93..000000000000
--- a/arch/arm/mach-vexpress/Makefile.boot
+++ /dev/null
@@ -1,10 +0,0 @@
-# Those numbers are used only by the non-DT V2P-CA9 platform
-# The DT-enabled ones require CONFIG_AUTO_ZRELADDR=y
- zreladdr-y += 0x60008000
-params_phys-y := 0x60000100
-initrd_phys-y := 0x60800000
-
-dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \
- vexpress-v2p-ca9.dtb \
- vexpress-v2p-ca15-tc1.dtb \
- vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index a3a4980770bd..f134cd4a85f1 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -5,3 +5,7 @@
#define V2T_PERIPH 0xf8200000
void vexpress_dt_smp_map_io(void);
+
+extern struct smp_operations vexpress_smp_ops;
+
+extern void vexpress_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index e4073a60a864..4f471fa3e3c5 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -26,6 +26,7 @@
#include "core.h"
#include <mach/motherboard.h>
+#include <mach/irqs.h>
#include <plat/clcd.h>
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index c504a72b94d6..a141b98d84fe 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -16,8 +16,6 @@
#include <asm/smp_plat.h>
#include <asm/cp15.h>
-extern volatile int pen_release;
-
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
@@ -84,17 +82,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
}
}
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref vexpress_cpu_die(unsigned int cpu)
{
int spurious = 0;
@@ -113,12 +106,3 @@ void platform_cpu_die(unsigned int cpu)
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-vexpress/include/mach/gpio.h b/arch/arm/mach-vexpress/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-vexpress/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h
index 4b10ee7657a6..f8f7f782eb55 100644
--- a/arch/arm/mach-vexpress/include/mach/irqs.h
+++ b/arch/arm/mach-vexpress/include/mach/irqs.h
@@ -1,4 +1,6 @@
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
+#ifndef CONFIG_SPARSE_IRQ
#define NR_IRQS 256
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/timex.h b/arch/arm/mach-vexpress/include/mach/timex.h
deleted file mode 100644
index 00029bacd43c..000000000000
--- a/arch/arm/mach-vexpress/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/timex.h
- *
- * RealView architecture timex specifications
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h
deleted file mode 100644
index 1e472eb0bbdc..000000000000
--- a/arch/arm/mach-vexpress/include/mach/uncompress.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/uncompress.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
-
-#define UART_BASE 0x10009000
-#define UART_BASE_RS1 0x1c090000
-
-static unsigned long get_uart_base(void)
-{
-#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
- unsigned long mpcore_periph;
-
- /*
- * Make an educated guess regarding the memory map:
- * - the original A9 core tile, which has MPCore peripherals
- * located at 0x1e000000, should use UART at 0x10009000
- * - all other (RS1 complaint) tiles use UART mapped
- * at 0x1c090000
- */
- asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph));
-
- if (mpcore_periph == 0x1e000000)
- return UART_BASE;
- else
- return UART_BASE_RS1;
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
- return UART_BASE;
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
- return UART_BASE_RS1;
-#else
- return 0;
-#endif
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned long base = get_uart_base();
-
- if (!base)
- return;
-
- while (AMBA_UART_FR(base) & (1 << 5))
- barrier();
-
- AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
- unsigned long base = get_uart_base();
-
- if (!base)
- return;
-
- while (AMBA_UART_FR(base) & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 14ba1128ae8d..7db27c8c05cc 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -20,9 +20,9 @@
#include <mach/motherboard.h>
-#include "core.h"
+#include <plat/platsmp.h>
-extern void versatile_secondary_startup(void);
+#include "core.h"
#if defined(CONFIG_OF)
@@ -167,7 +167,7 @@ void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init vexpress_smp_init_cpus(void)
{
if (ct_desc)
ct_desc->init_cpu_map();
@@ -176,7 +176,7 @@ void __init smp_init_cpus(void)
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
{
/*
* Initialise the present map, which describes the set of CPUs
@@ -195,3 +195,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
*/
v2m_flags_set(virt_to_phys(versatile_secondary_startup));
}
+
+struct smp_operations __initdata vexpress_smp_ops = {
+ .smp_init_cpus = vexpress_smp_init_cpus,
+ .smp_prepare_cpus = vexpress_smp_prepare_cpus,
+ .smp_secondary_init = versatile_secondary_init,
+ .smp_boot_secondary = versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = vexpress_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 37608f22ee31..5f6b7d543e55 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -5,6 +5,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
+#include <linux/smp.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
@@ -38,6 +39,7 @@
#include <mach/motherboard.h>
#include <plat/sched_clock.h>
+#include <plat/platsmp.h>
#include "core.h"
@@ -530,6 +532,7 @@ static void __init v2m_init(void)
MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.atag_offset = 0x100,
+ .smp = smp_ops(vexpress_smp_ops),
.map_io = v2m_map_io,
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
@@ -539,8 +542,6 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.restart = v2m_restart,
MACHINE_END
-#if defined(CONFIG_ARCH_VEXPRESS_DT)
-
static struct map_desc v2m_rs1_io_desc __initdata = {
.virtual = V2M_PERIPH,
.pfn = __phys_to_pfn(0x1c000000),
@@ -663,6 +664,7 @@ const static char *v2m_dt_match[] __initconst = {
DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.dt_compat = v2m_dt_match,
+ .smp = smp_ops(vexpress_smp_ops),
.map_io = v2m_dt_map_io,
.init_early = v2m_dt_init_early,
.init_irq = v2m_dt_init_irq,
@@ -671,5 +673,3 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.handle_irq = gic_handle_irq,
.restart = v2m_restart,
MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-vt8500/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500fb.h b/arch/arm/mach-vt8500/include/mach/vt8500fb.h
deleted file mode 100644
index 7f399c370fe0..000000000000
--- a/arch/arm/mach-vt8500/include/mach/vt8500fb.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * VT8500/WM8505 Frame Buffer platform data definitions
- *
- * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _VT8500FB_H
-#define _VT8500FB_H
-
-#include <linux/fb.h>
-
-struct vt8500fb_platform_data {
- struct fb_videomode mode;
- u32 xres_virtual;
- u32 yres_virtual;
- u32 bpp;
- unsigned long video_mem_phys;
- void *video_mem_virt;
- unsigned long video_mem_len;
-};
-
-#endif /* _VT8500FB_H */
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 48f5b9fdfb7f..7abdb9645c5b 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -34,11 +34,11 @@
#include <asm/mach-types.h>
#include <mach/regs-serial.h>
-#include <mach/nuc900_spi.h>
+#include <linux/platform_data/spi-nuc900.h>
#include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
#include <mach/regs-ldm.h>
-#include <mach/w90p910_keypad.h>
+#include <linux/platform_data/keypad-w90p910.h>
#include "cpu.h"
diff --git a/arch/arm/mach-w90x900/include/mach/fb.h b/arch/arm/mach-w90x900/include/mach/fb.h
deleted file mode 100644
index cec5ece765ed..000000000000
--- a/arch/arm/mach-w90x900/include/mach/fb.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* linux/include/asm/arch-nuc900/fb.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Changelog:
- *
- * 2008/08/26 vincen.zswan modify this file for LCD.
- */
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-
-
-/* LCD Controller Hardware Desc */
-struct nuc900fb_hw {
- unsigned int lcd_dccs;
- unsigned int lcd_device_ctrl;
- unsigned int lcd_mpulcd_cmd;
- unsigned int lcd_int_cs;
- unsigned int lcd_crtc_size;
- unsigned int lcd_crtc_dend;
- unsigned int lcd_crtc_hr;
- unsigned int lcd_crtc_hsync;
- unsigned int lcd_crtc_vr;
- unsigned int lcd_va_baddr0;
- unsigned int lcd_va_baddr1;
- unsigned int lcd_va_fbctrl;
- unsigned int lcd_va_scale;
- unsigned int lcd_va_test;
- unsigned int lcd_va_win;
- unsigned int lcd_va_stuff;
-};
-
-/* LCD Display Description */
-struct nuc900fb_display {
- /* LCD Image type */
- unsigned type;
-
- /* LCD Screen Size */
- unsigned short width;
- unsigned short height;
-
- /* LCD Screen Info */
- unsigned short xres;
- unsigned short yres;
- unsigned short bpp;
-
- unsigned long pixclock;
- unsigned short left_margin;
- unsigned short right_margin;
- unsigned short hsync_len;
- unsigned short upper_margin;
- unsigned short lower_margin;
- unsigned short vsync_len;
-
- /* hardware special register value */
- unsigned int dccs;
- unsigned int devctl;
- unsigned int fbctrl;
- unsigned int scale;
-};
-
-struct nuc900fb_mach_info {
- struct nuc900fb_display *displays;
- unsigned num_displays;
- unsigned default_display;
- /* GPIO Setting Info */
- unsigned gpio_dir;
- unsigned gpio_dir_mask;
- unsigned gpio_data;
- unsigned gpio_data_mask;
-};
-
-extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-w90x900/include/mach/i2c.h b/arch/arm/mach-w90x900/include/mach/i2c.h
deleted file mode 100644
index 9ffb12d06e91..000000000000
--- a/arch/arm/mach-w90x900/include/mach/i2c.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_ARCH_NUC900_I2C_H
-#define __ASM_ARCH_NUC900_I2C_H
-
-struct nuc900_platform_i2c {
- int bus_num;
- unsigned long bus_freq;
-};
-
-#endif /* __ASM_ARCH_NUC900_I2C_H */
diff --git a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
deleted file mode 100644
index 2c4e0c128501..000000000000
--- a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/nuc900_spi.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_SPI_H
-#define __ASM_ARCH_SPI_H
-
-extern void mfp_set_groupg(struct device *dev, const char *subname);
-
-struct nuc900_spi_info {
- unsigned int num_cs;
- unsigned int lsb;
- unsigned int txneg;
- unsigned int rxneg;
- unsigned int divider;
- unsigned int sleep;
- unsigned int txnum;
- unsigned int txbitlen;
- int bus_num;
-};
-
-struct nuc900_spi_chip {
- unsigned char bits_per_word;
-};
-
-#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
deleted file mode 100644
index 556778e8ddaa..000000000000
--- a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ASM_ARCH_W90P910_KEYPAD_H
-#define __ASM_ARCH_W90P910_KEYPAD_H
-
-#include <linux/input/matrix_keypad.h>
-
-extern void mfp_set_groupi(struct device *dev);
-
-struct w90p910_keypad_platform_data {
- const struct matrix_keymap_data *keymap_data;
-
- unsigned int prescale;
- unsigned int debounce;
-};
-
-#endif /* __ASM_ARCH_W90P910_KEYPAD_H */
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 067d8f9166dc..500fe5932ce9 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -20,7 +20,7 @@
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
#include "nuc950.h"
diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
index 5955f5da82ee..3793e475cd95 100644
--- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
@@ -8,7 +8,7 @@
#include <mach/hardware.h>
#include <mach/devices-common.h>
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
{ \
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 28ba09f4ebb9..ead901814c0d 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -139,6 +139,8 @@ extern void imx_gpc_post_resume(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_clock_map_io(void);
+extern void imx_cpu_die(unsigned int cpu);
+
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
extern void imx51_pm_init(void);
@@ -155,4 +157,6 @@ extern int mx51_neon_fixup(void);
static inline int mx51_neon_fixup(void) { return 0; }
#endif
+extern struct smp_operations imx_smp_ops;
+
#endif
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index a7f5bb1084d7..9e3e3d8ae8c2 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -9,7 +9,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
-#include <mach/sdma.h>
+#include <linux/platform_data/dma-imx-sdma.h>
extern struct device mxc_aips_bus;
extern struct device mxc_ahb_bus;
@@ -74,7 +74,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata);
-#include <mach/mx21-usbhost.h>
+#include <linux/platform_data/usb-mx2.h>
struct imx_imx21_hcd_data {
resource_size_t iobase;
resource_size_t irq;
@@ -98,7 +98,7 @@ struct imx_imxdi_rtc_data {
struct platform_device *__init imx_add_imxdi_rtc(
const struct imx_imxdi_rtc_data *data);
-#include <mach/imxfb.h>
+#include <linux/platform_data/video-imxfb.h>
struct imx_imx_fb_data {
resource_size_t iobase;
resource_size_t iosize;
@@ -108,7 +108,7 @@ struct platform_device *__init imx_add_imx_fb(
const struct imx_imx_fb_data *data,
const struct imx_fb_platform_data *pdata);
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-imx.h>
struct imx_imx_i2c_data {
int id;
resource_size_t iobase;
@@ -129,7 +129,7 @@ struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata);
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
struct imx_imx_ssi_data {
int id;
resource_size_t iobase;
@@ -144,7 +144,7 @@ struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata);
-#include <mach/imx-uart.h>
+#include <linux/platform_data/serial-imx.h>
struct imx_imx_uart_3irq_data {
int id;
resource_size_t iobase;
@@ -167,7 +167,7 @@ struct platform_device *__init imx_add_imx_uart_1irq(
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
-#include <mach/usb.h>
+#include <linux/platform_data/usb-imx_udc.h>
struct imx_imx_udc_data {
resource_size_t iobase;
resource_size_t iosize;
@@ -183,8 +183,8 @@ struct platform_device *__init imx_add_imx_udc(
const struct imx_imx_udc_data *data,
const struct imxusb_platform_data *pdata);
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
+#include <linux/platform_data/video-mx3fb.h>
+#include <linux/platform_data/camera-mx3.h>
struct imx_ipu_core_data {
resource_size_t iobase;
resource_size_t synirq;
@@ -199,7 +199,7 @@ struct platform_device *__init imx_add_mx3_sdc_fb(
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata);
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
struct imx_mx1_camera_data {
resource_size_t iobase;
resource_size_t iosize;
@@ -209,7 +209,7 @@ struct platform_device *__init imx_add_mx1_camera(
const struct imx_mx1_camera_data *data,
const struct mx1_camera_pdata *pdata);
-#include <mach/mx2_cam.h>
+#include <linux/platform_data/camera-mx2.h>
struct imx_mx2_camera_data {
resource_size_t iobasecsi;
resource_size_t iosizecsi;
@@ -224,7 +224,7 @@ struct platform_device *__init imx_add_mx2_camera(
struct platform_device *__init imx_add_mx2_emmaprp(
const struct imx_mx2_camera_data *data);
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
struct imx_mxc_ehci_data {
int id;
resource_size_t iobase;
@@ -234,7 +234,7 @@ struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata);
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-mxcmmc.h>
struct imx_mxc_mmc_data {
int id;
resource_size_t iobase;
@@ -246,7 +246,7 @@ struct platform_device *__init imx_add_mxc_mmc(
const struct imx_mxc_mmc_data *data,
const struct imxmmc_platform_data *pdata);
-#include <mach/mxc_nand.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
struct imx_mxc_nand_data {
/*
* id is traditionally 0, but -1 is more appropriate. We use -1 for new
@@ -295,7 +295,7 @@ struct imx_mxc_w1_data {
struct platform_device *__init imx_add_mxc_w1(
const struct imx_mxc_w1_data *data);
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
struct imx_sdhci_esdhc_imx_data {
const char *devid;
int id;
@@ -306,7 +306,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
const struct imx_sdhci_esdhc_imx_data *data,
const struct esdhc_platform_data *pdata);
-#include <mach/spi.h>
+#include <linux/platform_data/spi-imx.h>
struct imx_spi_imx_data {
const char *devid;
int id;
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
deleted file mode 100644
index 1b9080385b46..000000000000
--- a/arch/arm/plat-mxc/include/mach/dma.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
-
-#include <linux/scatterlist.h>
-#include <linux/device.h>
-#include <linux/dmaengine.h>
-
-/*
- * This enumerates peripheral types. Used for SDMA.
- */
-enum sdma_peripheral_type {
- IMX_DMATYPE_SSI, /* MCU domain SSI */
- IMX_DMATYPE_SSI_SP, /* Shared SSI */
- IMX_DMATYPE_MMC, /* MMC */
- IMX_DMATYPE_SDHC, /* SDHC */
- IMX_DMATYPE_UART, /* MCU domain UART */
- IMX_DMATYPE_UART_SP, /* Shared UART */
- IMX_DMATYPE_FIRI, /* FIRI */
- IMX_DMATYPE_CSPI, /* MCU domain CSPI */
- IMX_DMATYPE_CSPI_SP, /* Shared CSPI */
- IMX_DMATYPE_SIM, /* SIM */
- IMX_DMATYPE_ATA, /* ATA */
- IMX_DMATYPE_CCM, /* CCM */
- IMX_DMATYPE_EXT, /* External peripheral */
- IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */
- IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */
- IMX_DMATYPE_DSP, /* DSP */
- IMX_DMATYPE_MEMORY, /* Memory */
- IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */
- IMX_DMATYPE_SPDIF, /* SPDIF */
- IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */
- IMX_DMATYPE_ASRC, /* ASRC */
- IMX_DMATYPE_ESAI, /* ESAI */
-};
-
-enum imx_dma_prio {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-};
-
-struct imx_dma_data {
- int dma_request; /* DMA request line */
- enum sdma_peripheral_type peripheral_type;
- int priority;
-};
-
-static inline int imx_dma_is_ipu(struct dma_chan *chan)
-{
- return !strcmp(dev_name(chan->device->dev), "ipu-core");
-}
-
-static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
-{
- return strstr(dev_name(chan->device->dev), "sdma") ||
- !strcmp(dev_name(chan->device->dev), "imx-dma");
-}
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h
deleted file mode 100644
index aaf97481f413..000000000000
--- a/arch/arm/plat-mxc/include/mach/esdhc.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#ifndef __ASM_ARCH_IMX_ESDHC_H
-#define __ASM_ARCH_IMX_ESDHC_H
-
-enum wp_types {
- ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
- ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
- ESDHC_WP_GPIO, /* external gpio pin for WP */
-};
-
-enum cd_types {
- ESDHC_CD_NONE, /* no CD, neither controller nor gpio */
- ESDHC_CD_CONTROLLER, /* mmc controller internal CD */
- ESDHC_CD_GPIO, /* external gpio pin for CD */
- ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */
-};
-
-/**
- * struct esdhc_platform_data - platform data for esdhc on i.MX
- *
- * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
- *
- * @wp_gpio: gpio for write_protect
- * @cd_gpio: gpio for card_detect interrupt
- * @wp_type: type of write_protect method (see wp_types enum above)
- * @cd_type: type of card_detect method (see cd_types enum above)
- */
-
-struct esdhc_platform_data {
- unsigned int wp_gpio;
- unsigned int cd_gpio;
- enum wp_types wp_type;
- enum cd_types cd_type;
-};
-#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
deleted file mode 100644
index 8289d915e615..000000000000
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * i2c.h - i.MX I2C driver header file
- *
- * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This file is released under the GPLv2
- */
-
-#ifndef __ASM_ARCH_I2C_H_
-#define __ASM_ARCH_I2C_H_
-
-/**
- * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @bitrate: Bus speed measured in Hz
- *
- **/
-struct imxi2c_platform_data {
- u32 bitrate;
-};
-
-#endif /* __ASM_ARCH_I2C_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
deleted file mode 100644
index 4adec9b154dd..000000000000
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-#define IMXUART_IRDA (1<<1)
-
-struct imxuart_platform_data {
- int (*init)(struct platform_device *pdev);
- void (*exit)(struct platform_device *pdev);
- unsigned int flags;
- void (*irda_enable)(int enable);
- unsigned int irda_inv_rx:1;
- unsigned int irda_inv_tx:1;
- unsigned short transceiver_delay;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
deleted file mode 100644
index 9de8f062ad5d..000000000000
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * This structure describes the machine which we are running on.
- */
-#ifndef __MACH_IMXFB_H__
-#define __MACH_IMXFB_H__
-
-#include <linux/fb.h>
-
-#define PCR_TFT (1 << 31)
-#define PCR_COLOR (1 << 30)
-#define PCR_PBSIZ_1 (0 << 28)
-#define PCR_PBSIZ_2 (1 << 28)
-#define PCR_PBSIZ_4 (2 << 28)
-#define PCR_PBSIZ_8 (3 << 28)
-#define PCR_BPIX_1 (0 << 25)
-#define PCR_BPIX_2 (1 << 25)
-#define PCR_BPIX_4 (2 << 25)
-#define PCR_BPIX_8 (3 << 25)
-#define PCR_BPIX_12 (4 << 25)
-#define PCR_BPIX_16 (5 << 25)
-#define PCR_BPIX_18 (6 << 25)
-#define PCR_PIXPOL (1 << 24)
-#define PCR_FLMPOL (1 << 23)
-#define PCR_LPPOL (1 << 22)
-#define PCR_CLKPOL (1 << 21)
-#define PCR_OEPOL (1 << 20)
-#define PCR_SCLKIDLE (1 << 19)
-#define PCR_END_SEL (1 << 18)
-#define PCR_END_BYTE_SWAP (1 << 17)
-#define PCR_REV_VS (1 << 16)
-#define PCR_ACD_SEL (1 << 15)
-#define PCR_ACD(x) (((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL (1 << 7)
-#define PCR_SHARP (1 << 6)
-#define PCR_PCD(x) ((x) & 0x3f)
-
-#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
-#define PWMR_LDMSK (1 << 15)
-#define PWMR_SCR1 (1 << 10)
-#define PWMR_SCR0 (1 << 9)
-#define PWMR_CC_EN (1 << 8)
-#define PWMR_PW(x) ((x) & 0xff)
-
-#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x) (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x) (((x) & 0xf))
-
-#define DMACR_BURST (1 << 31)
-#define DMACR_HM(x) (((x) & 0xf) << 16)
-#define DMACR_TM(x) ((x) & 0xf)
-
-struct imx_fb_videomode {
- struct fb_videomode mode;
- u32 pcr;
- unsigned char bpp;
-};
-
-struct imx_fb_platform_data {
- struct imx_fb_videomode *mode;
- int num_modes;
-
- u_int cmap_greyscale:1,
- cmap_inverse:1,
- cmap_static:1,
- unused:29;
-
- u_int pwmr;
- u_int lscr1;
- u_int dmacr;
-
- u_char * fixed_screen_cpu;
- dma_addr_t fixed_screen_dma;
-
- int (*init)(struct platform_device *);
- void (*exit)(struct platform_device *);
-
- void (*lcd_power)(int);
- void (*backlight_power)(int);
-};
-
-void set_imx_fb_info(struct imx_fb_platform_data *);
-#endif /* ifndef __MACH_IMXFB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h
deleted file mode 100644
index 29115f405af9..000000000000
--- a/arch/arm/plat-mxc/include/mach/mmc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-/* board specific SDHC data, optional.
- * If not present, a writable card with 3,3V is assumed.
- */
-struct imxmmc_platform_data {
- /* Return values for the get_ro callback should be:
- * 0 for a read/write card
- * 1 for a read-only card
- * -ENOSYS when not supported (equal to NULL callback)
- * or a negative errno value when something bad happened
- */
- int (*get_ro)(struct device *);
-
- /* board specific hook to (de)initialize the SD slot.
- * The board code can call 'handler' on a card detection
- * change giving data as argument.
- */
- int (*init)(struct device *dev, irq_handler_t handler, void *data);
- void (*exit)(struct device *dev, void *data);
-
- /* available voltages. If not given, assume
- * MMC_VDD_32_33 | MMC_VDD_33_34
- */
- unsigned int ocr_avail;
-
- /* adjust slot voltage */
- void (*setpower)(struct device *, unsigned int vdd);
-
- /* enable card detect using DAT3 */
- int dat3_card_detect;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx1_camera.h b/arch/arm/plat-mxc/include/mach/mx1_camera.h
deleted file mode 100644
index 4fd6c70314b4..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx1_camera.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * mx1_camera.h - i.MX1/i.MXL camera driver header file
- *
- * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA camera.h file:
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define MX1_CAMERA_DATA_HIGH 1
-#define MX1_CAMERA_PCLK_RISING 2
-#define MX1_CAMERA_VSYNC_HIGH 4
-
-extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
-
-/**
- * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
- * @mclk_10khz: master clock frequency in 10kHz units
- * @flags: MX1 camera platform flags
- */
-struct mx1_camera_pdata {
- unsigned long mclk_10khz;
- unsigned long flags;
-};
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h b/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
deleted file mode 100644
index 22d0b596262c..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MX21_USBH
-#define __ASM_ARCH_MX21_USBH
-
-enum mx21_usbh_xcvr {
- /* Values below as used by hardware (HWMODE register) */
- MX21_USBXCVR_TXDIF_RXDIF = 0,
- MX21_USBXCVR_TXDIF_RXSE = 1,
- MX21_USBXCVR_TXSE_RXDIF = 2,
- MX21_USBXCVR_TXSE_RXSE = 3,
-};
-
-struct mx21_usbh_platform_data {
- enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
- enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
- u16 enable_host1:1,
- enable_host2:1,
- enable_otg_host:1, /* enable "OTG" port (as host) */
- host1_xcverless:1, /* traceiverless host1 port */
- host1_txenoe:1, /* output enable host1 transmit enable */
- otg_ext_xcvr:1, /* external tranceiver for OTG port */
- unused:10;
-};
-
-#endif /* __ASM_ARCH_MX21_USBH */
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
deleted file mode 100644
index 7ded6f1f74bc..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * mx2-cam.h - i.MX27/i.MX25 camera driver header file
- *
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
- * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX2_CAM_H_
-#define __MACH_MX2_CAM_H_
-
-#define MX2_CAMERA_EXT_VSYNC (1 << 1)
-#define MX2_CAMERA_CCIR (1 << 2)
-#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
-#define MX2_CAMERA_HSYNC_HIGH (1 << 4)
-#define MX2_CAMERA_GATED_CLOCK (1 << 5)
-#define MX2_CAMERA_INV_DATA (1 << 6)
-#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
-
-/**
- * struct mx2_camera_platform_data - optional platform data for mx2_camera
- * @flags: any combination of MX2_CAMERA_*
- * @clk: clock rate of the csi block / 2
- */
-struct mx2_camera_platform_data {
- unsigned long flags;
- unsigned long clk;
-};
-
-#endif /* __MACH_MX2_CAM_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h
deleted file mode 100644
index f226ee3777e1..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx3_camera.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * mx3_camera.h - i.MX3x camera driver header file
- *
- * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MX3_CAMERA_H_
-#define _MX3_CAMERA_H_
-
-#include <linux/device.h>
-
-#define MX3_CAMERA_CLK_SRC 1
-#define MX3_CAMERA_EXT_VSYNC 2
-#define MX3_CAMERA_DP 4
-#define MX3_CAMERA_PCP 8
-#define MX3_CAMERA_HSP 0x10
-#define MX3_CAMERA_VSP 0x20
-#define MX3_CAMERA_DATAWIDTH_4 0x40
-#define MX3_CAMERA_DATAWIDTH_8 0x80
-#define MX3_CAMERA_DATAWIDTH_10 0x100
-#define MX3_CAMERA_DATAWIDTH_15 0x200
-
-#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
- MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
-
-/**
- * struct mx3_camera_pdata - i.MX3x camera platform data
- * @flags: MX3_CAMERA_* flags
- * @mclk_10khz: master clock frequency in 10kHz units
- * @dma_dev: IPU DMA device to match against in channel allocation
- */
-struct mx3_camera_pdata {
- unsigned long flags;
- unsigned long mclk_10khz;
- struct device *dma_dev;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
deleted file mode 100644
index fdbe60001542..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx3fb.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MX3FB_H__
-#define __ASM_ARCH_MX3FB_H__
-
-#include <linux/device.h>
-#include <linux/fb.h>
-
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH 0x80000000
-#define FB_SYNC_CLK_INVERT 0x40000000
-#define FB_SYNC_DATA_INVERT 0x20000000
-#define FB_SYNC_CLK_IDLE_EN 0x10000000
-#define FB_SYNC_SHARP_MODE 0x08000000
-#define FB_SYNC_SWAP_RGB 0x04000000
-#define FB_SYNC_CLK_SEL_EN 0x02000000
-
-/*
- * Specify the way your display is connected. The IPU can arbitrarily
- * map the internal colors to the external data lines. We only support
- * the following mappings at the moment.
- */
-enum disp_data_mapping {
- /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
- IPU_DISP_DATA_MAPPING_RGB666,
- /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
- IPU_DISP_DATA_MAPPING_RGB565,
- /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
- IPU_DISP_DATA_MAPPING_RGB888,
-};
-
-/**
- * struct mx3fb_platform_data - mx3fb platform data
- *
- * @dma_dev: pointer to the dma-device, used for dma-slave connection
- * @mode: pointer to a platform-provided per mxc_register_fb() videomode
- */
-struct mx3fb_platform_data {
- struct device *dma_dev;
- const char *name;
- const struct fb_videomode *mode;
- int num_modes;
- enum disp_data_mapping disp_data_fmt;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
deleted file mode 100644
index 7eb9d1329671..000000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
-#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
-
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
-#define MXC_EHCI_TTL_ENABLED (1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 9)
-#define MXC_EHCI_IPPUE_DOWN (1 << 10)
-#define MXC_EHCI_IPPUE_UP (1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
-
-#define MXC_USBCTRL_OFFSET 0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
-#define MXC_USBH2CTRL_OFFSET 0x14
-
-#define MX5_USBOTHER_REGS_OFFSET 0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
-
-struct mxc_usbh_platform_data {
- int (*init)(struct platform_device *pdev);
- int (*exit)(struct platform_device *pdev);
-
- unsigned int portsc;
- struct usb_phy *otg;
-};
-
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
-#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
deleted file mode 100644
index 6bb96ef1600b..000000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-#include <linux/mtd/partitions.h>
-
-struct mxc_nand_platform_data {
- unsigned int width; /* data bus width in bytes */
- unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */
- unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
- struct mtd_partition *parts; /* partition table */
- int nr_parts; /* size of parts */
-};
-#endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h
deleted file mode 100644
index 3a3942823c20..000000000000
--- a/arch/arm/plat-mxc/include/mach/sdma.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __MACH_MXC_SDMA_H__
-#define __MACH_MXC_SDMA_H__
-
-/**
- * struct sdma_script_start_addrs - SDMA script start pointers
- *
- * start addresses of the different functions in the physical
- * address space of the SDMA engine.
- */
-struct sdma_script_start_addrs {
- s32 ap_2_ap_addr;
- s32 ap_2_bp_addr;
- s32 ap_2_ap_fixed_addr;
- s32 bp_2_ap_addr;
- s32 loopback_on_dsp_side_addr;
- s32 mcu_interrupt_only_addr;
- s32 firi_2_per_addr;
- s32 firi_2_mcu_addr;
- s32 per_2_firi_addr;
- s32 mcu_2_firi_addr;
- s32 uart_2_per_addr;
- s32 uart_2_mcu_addr;
- s32 per_2_app_addr;
- s32 mcu_2_app_addr;
- s32 per_2_per_addr;
- s32 uartsh_2_per_addr;
- s32 uartsh_2_mcu_addr;
- s32 per_2_shp_addr;
- s32 mcu_2_shp_addr;
- s32 ata_2_mcu_addr;
- s32 mcu_2_ata_addr;
- s32 app_2_per_addr;
- s32 app_2_mcu_addr;
- s32 shp_2_per_addr;
- s32 shp_2_mcu_addr;
- s32 mshc_2_mcu_addr;
- s32 mcu_2_mshc_addr;
- s32 spdif_2_mcu_addr;
- s32 mcu_2_spdif_addr;
- s32 asrc_2_mcu_addr;
- s32 ext_mem_2_ipu_addr;
- s32 descrambler_addr;
- s32 dptc_dvfs_addr;
- s32 utra_addr;
- s32 ram_code_start_addr;
-};
-
-/**
- * struct sdma_platform_data - platform specific data for SDMA engine
- *
- * @fw_name The firmware name
- * @script_addrs SDMA scripts addresses in SDMA ROM
- */
-struct sdma_platform_data {
- char *fw_name;
- struct sdma_script_start_addrs *script_addrs;
-};
-
-#endif /* __MACH_MXC_SDMA_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/spi.h b/arch/arm/plat-mxc/include/mach/spi.h
deleted file mode 100644
index 08be445e8eb8..000000000000
--- a/arch/arm/plat-mxc/include/mach/spi.h
+++ /dev/null
@@ -1,27 +0,0 @@
-
-#ifndef __MACH_SPI_H_
-#define __MACH_SPI_H_
-
-/*
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
- * pins, numbers < 0 mean internal CSPI chipselects according
- * to MXC_SPI_CS(). Normally you want to use gpio based chip
- * selects as the CSPI module tries to be intelligent about
- * when to assert the chipselect: The CSPI module deasserts the
- * chipselect once it runs out of input data. The other problem
- * is that it is not possible to mix between high active and low
- * active chipselects on one single bus using the internal
- * chipselects. Unfortunately Freescale decided to put some
- * chipselects on dedicated pins which are not usable as gpios,
- * so we have to support the internal chipselects.
- * @num_chipselect: ARRAY_SIZE(chipselect)
- */
-struct spi_imx_master {
- int *chipselect;
- int num_chipselect;
-};
-
-#define MXC_SPI_CS(no) ((no) - 32)
-
-#endif /* __MACH_SPI_H_*/
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
deleted file mode 100644
index 63f3c2804239..000000000000
--- a/arch/arm/plat-mxc/include/mach/ssi.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __MACH_SSI_H
-#define __MACH_SSI_H
-
-struct snd_ac97;
-
-extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
-extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
-
-struct imx_ssi_platform_data {
- unsigned int flags;
-#define IMX_SSI_DMA (1 << 0)
-#define IMX_SSI_USE_AC97 (1 << 1)
-#define IMX_SSI_NET (1 << 2)
-#define IMX_SSI_SYN (1 << 3)
-#define IMX_SSI_USE_I2S_SLAVE (1 << 4)
- void (*ac97_reset) (struct snd_ac97 *ac97);
- void (*ac97_warm_reset)(struct snd_ac97 *ac97);
-};
-
-#endif /* __MACH_SSI_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
deleted file mode 100644
index be273371f34a..000000000000
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_USB
-#define __ASM_ARCH_MXC_USB
-
-struct imxusb_platform_data {
- int (*init)(struct device *);
- void (*exit)(struct device *);
-};
-
-#endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/ssi-fiq-ksym.c b/arch/arm/plat-mxc/ssi-fiq-ksym.c
index b5fad454da78..792090f9a032 100644
--- a/arch/arm/plat-mxc/ssi-fiq-ksym.c
+++ b/arch/arm/plat-mxc/ssi-fiq-ksym.c
@@ -10,7 +10,7 @@
#include <linux/module.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
diff --git a/arch/arm/plat-nomadik/include/plat/ske.h b/arch/arm/plat-nomadik/include/plat/ske.h
deleted file mode 100644
index 31382fbc07dc..000000000000
--- a/arch/arm/plat-nomadik/include/plat/ske.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
- *
- * ux500 Scroll key and Keypad Encoder (SKE) header
- */
-
-#ifndef __SKE_H
-#define __SKE_H
-
-#include <linux/input/matrix_keypad.h>
-
-/* register definitions for SKE peripheral */
-#define SKE_CR 0x00
-#define SKE_VAL0 0x04
-#define SKE_VAL1 0x08
-#define SKE_DBCR 0x0C
-#define SKE_IMSC 0x10
-#define SKE_RIS 0x14
-#define SKE_MIS 0x18
-#define SKE_ICR 0x1C
-
-/*
- * Keypad module
- */
-
-/**
- * struct keypad_platform_data - structure for platform specific data
- * @init: pointer to keypad init function
- * @exit: pointer to keypad deinitialisation function
- * @keymap_data: matrix scan code table for keycodes
- * @krow: maximum number of rows
- * @kcol: maximum number of columns
- * @debounce_ms: platform specific debounce time
- * @no_autorepeat: flag for auto repetition
- * @wakeup_enable: allow waking up the system
- */
-struct ske_keypad_platform_data {
- int (*init)(void);
- int (*exit)(void);
- const struct matrix_keymap_data *keymap_data;
- u8 krow;
- u8 kcol;
- u8 debounce_ms;
- bool no_autorepeat;
- bool wakeup_enable;
-};
-#endif /*__SKE_KPD_H*/
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index b8b747a9d360..87f53caef655 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -19,8 +19,8 @@
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <net/dsa.h>
-#include <plat/mv_xor.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <mach/bridge-regs.h>
/* Create a clkdev entry for a given device/clk */
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index dfda74fae6f2..c29ee7ea200b 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -23,7 +23,7 @@
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
-#include <plat/gpio.h>
+#include <plat/orion-gpio.h>
/*
* GPIO unit register offsets.
diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h
deleted file mode 100644
index d6a55bd2e578..000000000000
--- a/arch/arm/plat-orion/include/plat/audio.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __PLAT_AUDIO_H
-#define __PLAT_AUDIO_H
-
-struct kirkwood_asoc_platform_data {
- int burst;
-};
-#endif
diff --git a/arch/arm/plat-orion/include/plat/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h
deleted file mode 100644
index 6fc78e430420..000000000000
--- a/arch/arm/plat-orion/include/plat/ehci-orion.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/ehci-orion.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_EHCI_ORION_H
-#define __PLAT_EHCI_ORION_H
-
-#include <linux/mbus.h>
-
-enum orion_ehci_phy_ver {
- EHCI_PHY_ORION,
- EHCI_PHY_DD,
- EHCI_PHY_KW,
- EHCI_PHY_NA,
-};
-
-struct orion_ehci_data {
- enum orion_ehci_phy_ver phy_version;
-};
-
-
-#endif
diff --git a/arch/arm/plat-orion/include/plat/mv_xor.h b/arch/arm/plat-orion/include/plat/mv_xor.h
deleted file mode 100644
index 2ba1f7d76eef..000000000000
--- a/arch/arm/plat-orion/include/plat/mv_xor.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/mv_xor.h
- *
- * Marvell XOR platform device data definition file.
- */
-
-#ifndef __PLAT_MV_XOR_H
-#define __PLAT_MV_XOR_H
-
-#include <linux/dmaengine.h>
-#include <linux/mbus.h>
-
-#define MV_XOR_SHARED_NAME "mv_xor_shared"
-#define MV_XOR_NAME "mv_xor"
-
-struct mv_xor_platform_data {
- struct platform_device *shared;
- int hw_id;
- dma_cap_mask_t cap_mask;
- size_t pool_size;
-};
-
-
-#endif
diff --git a/arch/arm/plat-orion/include/plat/mvsdio.h b/arch/arm/plat-orion/include/plat/mvsdio.h
deleted file mode 100644
index 1190efedcb94..000000000000
--- a/arch/arm/plat-orion/include/plat/mvsdio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/mvsdio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MVSDIO_H
-#define __MACH_MVSDIO_H
-
-#include <linux/mbus.h>
-
-struct mvsdio_platform_data {
- unsigned int clock;
- int gpio_card_detect;
- int gpio_write_protect;
-};
-
-#endif
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
index 81c6fc8a7b28..614dcac9dc52 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-orion/include/plat/gpio.h
+ * arch/arm/plat-orion/include/plat/orion-gpio.h
*
* Marvell Orion SoC GPIO handling.
*
diff --git a/arch/arm/plat-orion/include/plat/orion_nand.h b/arch/arm/plat-orion/include/plat/orion_nand.h
deleted file mode 100644
index 9f3c180834d1..000000000000
--- a/arch/arm/plat-orion/include/plat/orion_nand.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/orion_nand.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_ORION_NAND_H
-#define __PLAT_ORION_NAND_H
-
-/*
- * Device bus NAND private data
- */
-struct orion_nand_data {
- struct mtd_partition *parts;
- int (*dev_ready)(struct mtd_info *mtd);
- u32 nr_parts;
- u8 ale; /* address line number connected to ALE */
- u8 cle; /* address line number connected to CLE */
- u8 width; /* buswidth */
- u8 chip_delay;
-};
-
-
-#endif
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index d751964def4c..1867944415ca 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -16,7 +16,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <plat/irq.h>
-#include <plat/gpio.h>
+#include <plat/orion-gpio.h>
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 3b1e17bd3d17..7740bb31d662 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
+#include <plat/orion-gpio.h>
#include <plat/mpp.h>
/* Address of the ith MPP control register */
diff --git a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
deleted file mode 100644
index 5ce8d5e6ea51..000000000000
--- a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
-#define __ASM_ARCH_PXA27x_KEYPAD_H
-
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-
-#define MAX_MATRIX_KEY_ROWS (8)
-#define MAX_MATRIX_KEY_COLS (8)
-#define MATRIX_ROW_SHIFT (3)
-#define MAX_DIRECT_KEY_NUM (8)
-
-/* pxa3xx keypad platform specific parameters
- *
- * NOTE:
- * 1. direct_key_num indicates the number of keys in the direct keypad
- * _plus_ the number of rotary-encoder sensor inputs, this can be
- * left as 0 if only rotary encoders are enabled, the driver will
- * automatically calculate this
- *
- * 2. direct_key_map is the key code map for the direct keys, if rotary
- * encoder(s) are enabled, direct key 0/1(2/3) will be ignored
- *
- * 3. rotary can be either interpreted as a relative input event (e.g.
- * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
- *
- * 4. matrix key and direct key will use the same debounce_interval by
- * default, which should be sufficient in most cases
- *
- * pxa168 keypad platform specific parameter
- *
- * NOTE:
- * clear_wakeup_event callback is a workaround required to clear the
- * keypad interrupt. The keypad wake must be cleared in addition to
- * reading the MI/DI bits in the KPC register.
- */
-struct pxa27x_keypad_platform_data {
-
- /* code map for the matrix keys */
- unsigned int matrix_key_rows;
- unsigned int matrix_key_cols;
- unsigned int *matrix_key_map;
- int matrix_key_map_size;
-
- /* direct keys */
- int direct_key_num;
- unsigned int direct_key_map[MAX_DIRECT_KEY_NUM];
- /* the key output may be low active */
- int direct_key_low_active;
- /* give board a chance to choose the start direct key */
- unsigned int direct_key_mask;
-
- /* rotary encoders 0 */
- int enable_rotary0;
- int rotary0_rel_code;
- int rotary0_up_key;
- int rotary0_down_key;
-
- /* rotary encoders 1 */
- int enable_rotary1;
- int rotary1_rel_code;
- int rotary1_up_key;
- int rotary1_down_key;
-
- /* key debounce interval */
- unsigned int debounce_interval;
-
- /* clear wakeup event requirement for pxa168 */
- void (*clear_wakeup_event)(void);
-};
-
-extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
deleted file mode 100644
index c42f39f20195..000000000000
--- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef __ASM_ARCH_PXA3XX_NAND_H
-#define __ASM_ARCH_PXA3XX_NAND_H
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct pxa3xx_nand_timing {
- unsigned int tCH; /* Enable signal hold time */
- unsigned int tCS; /* Enable signal setup time */
- unsigned int tWH; /* ND_nWE high duration */
- unsigned int tWP; /* ND_nWE pulse time */
- unsigned int tRH; /* ND_nRE high duration */
- unsigned int tRP; /* ND_nRE pulse width */
- unsigned int tR; /* ND_nWE high to ND_nRE low for read */
- unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
- unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
- uint16_t read1;
- uint16_t read2;
- uint16_t program;
- uint16_t read_status;
- uint16_t read_id;
- uint16_t erase;
- uint16_t reset;
- uint16_t lock;
- uint16_t unlock;
- uint16_t lock_status;
-};
-
-struct pxa3xx_nand_flash {
- char *name;
- uint32_t chip_id;
- unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */
- unsigned int page_size; /* Page size in bytes (PAGE_SZ) */
- unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
- unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
- unsigned int num_blocks; /* Number of physical blocks in Flash */
-
- struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
-};
-
-/*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
- */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT (2)
-struct pxa3xx_nand_platform_data {
-
- /* the data flash bus is shared between the Static Memory
- * Controller and the Data Flash Controller, the arbiter
- * controls the ownership of the bus
- */
- int enable_arbiter;
-
- /* allow platform code to keep OBM/bootloader defined NFC config */
- int keep_config;
-
- /* indicate how many chip selects will be used */
- int num_cs;
-
- const struct mtd_partition *parts[NUM_CHIP_SELECT];
- unsigned int nr_parts[NUM_CHIP_SELECT];
-
- const struct pxa3xx_nand_flash * flash;
- size_t num_flash;
-};
-
-extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
-#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 8d26ce6813bb..03f654d55eff 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -47,25 +47,25 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/adc.h>
-#include <plat/ata.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/fb.h>
#include <plat/fb-s3c2410.h>
#include <plat/hdmi.h>
-#include <plat/hwmon.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
-#include <plat/mci.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <plat/sdhci.h>
-#include <plat/ts.h>
-#include <plat/udc.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/usb-phy.h>
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h
deleted file mode 100644
index 2a3855a8372a..000000000000
--- a/arch/arm/plat-samsung/include/plat/ata.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung CF-ATA platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_H
-#define __ASM_PLAT_ATA_H __FILE__
-
-/**
- * struct s3c_ide_platdata - S3C IDE driver platform data.
- * @setup_gpio: Setup the external GPIO pins to the right state for data
- * transfer in true-ide mode.
- */
-struct s3c_ide_platdata {
- void (*setup_gpio)(void);
-};
-
-/*
- * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
- * @pdata: Platform data for IDE driver.
- */
-extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
-
-/* architecture-specific IDE configuration */
-extern void s3c64xx_ide_setup_gpio(void);
-extern void s5pc100_ide_setup_gpio(void);
-extern void s5pv210_ide_setup_gpio(void);
-
-#endif /*__ASM_PLAT_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h
deleted file mode 100644
index 376af5286a3e..000000000000
--- a/arch/arm/plat-samsung/include/plat/audio-simtec.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
- unsigned int use_mpllin:1;
- unsigned int output_cdclk:1;
-
- unsigned int have_mic:1;
- unsigned int have_lout:1;
-
- int amp_gpio;
- int amp_gain[2];
-
- void (*startup)(void);
-};
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
deleted file mode 100644
index aa9875f77c40..000000000000
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* The machine init code calls s3c*_ac97_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for AC97 pins
- */
-#define S3C64XX_AC97_GPD 0
-#define S3C64XX_AC97_GPE 1
-extern void s3c64xx_ac97_setup_gpio(int);
-
-/*
- * The machine init code calls s5p*_spdif_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for S/PDIF pins
- */
-#define S5PC100_SPDIF_GPD 0
-#define S5PC100_SPDIF_GPG3 1
-extern void s5pc100_spdif_setup_gpio(int);
-
-struct samsung_i2s {
-/* If the Primary DAI has 5.1 Channels */
-#define QUIRK_PRI_6CHAN (1 << 0)
-/* If the I2S block has a Stereo Overlay Channel */
-#define QUIRK_SEC_DAI (1 << 1)
-/*
- * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
- * The Machine driver must provide suitably set clock to the I2S block.
- */
-#define QUIRK_NO_MUXPSR (1 << 2)
-#define QUIRK_NEED_RSTCLR (1 << 3)
- /* Quirks of the I2S controller */
- u32 quirks;
-
- /*
- * Array of clock names that can be used to generate I2S signals.
- * Also corresponds to clocks of I2SMOD[10]
- */
- const char **src_clk;
- dma_addr_t idma_addr;
-};
-
-/**
- * struct s3c_audio_pdata - common platform data for audio device drivers
- * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
- */
-struct s3c_audio_pdata {
- int (*cfg_gpio)(struct platform_device *);
- union {
- struct samsung_i2s i2s;
- } type;
-};
diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h
deleted file mode 100644
index 5f28cae18582..000000000000
--- a/arch/arm/plat-samsung/include/plat/ehci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_EHCI_H
-#define __PLAT_SAMSUNG_EHCI_H __FILE__
-
-struct s5p_ehci_platdata {
- int (*phy_init)(struct platform_device *pdev, int type);
- int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h
deleted file mode 100644
index c167e4429bc7..000000000000
--- a/arch/arm/plat-samsung/include/plat/hwmon.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
- const char *name;
- unsigned int mult;
- unsigned int div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
- struct s3c_hwmon_chcfg *in[8];
-};
-
-/**
- * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with the S3C HWMON device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
deleted file mode 100644
index 51d52e767a19..000000000000
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */
-
-/**
- * struct s3c2410_platform_i2c - Platform data for s3c I2C.
- * @bus_num: The bus number to use (if possible).
- * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- * @slave_addr: The I2C address for the slave device (if enabled).
- * @frequency: The desired frequency in Hz of the bus. This is
- * guaranteed to not be exceeded. If the caller does
- * not care, use zero and the driver will select a
- * useful default.
- * @sda_delay: The delay (in ns) applied to SDA edges.
- * @cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
- int bus_num;
- unsigned int flags;
- unsigned int slave_addr;
- unsigned long frequency;
- unsigned int sda_delay;
-
- void (*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c2410_platform_i2c default_i2c_data;
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h
deleted file mode 100644
index c42d31711944..000000000000
--- a/arch/arm/plat-samsung/include/plat/mci.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
- unsigned int no_wprotect:1;
- unsigned int no_detect:1;
- unsigned int wprotect_invert:1;
- unsigned int detect_invert:1; /* set => detect active high */
- unsigned int use_dma:1;
-
- unsigned int gpio_detect;
- unsigned int gpio_wprotect;
- unsigned long ocr_avail;
- void (*set_power)(unsigned char power_mode,
- unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h
deleted file mode 100644
index c45b1e8d4c2e..000000000000
--- a/arch/arm/plat-samsung/include/plat/mipi_csis.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- * driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
- unsigned long clk_rate;
- u8 lanes;
- u8 alignment;
- u8 hs_settle;
- bool fixed_phy_vdd;
- int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- * false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
deleted file mode 100644
index b64115fa93a4..000000000000
--- a/arch/arm/plat-samsung/include/plat/nand.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc: Entirely disable ECC - Dangerous
- * @flash_bbt: Openmoko u-boot can create a Bad Block Table
- * Setting this flag will allow the kernel to
- * look for it at boot time and also skip the NAND
- * scan.
- * @options: Default value to set into 'struct nand_chip' options.
- * @nr_chips: Number of chips in this set
- * @nr_partitions: Number of partitions pointed to by @partitions
- * @name: Name of set (optional)
- * @nr_map: Map for low-layer logical to physical chip numbers (option)
- * @partitions: The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
- unsigned int disable_ecc:1;
- unsigned int flash_bbt:1;
-
- unsigned int options;
- int nr_chips;
- int nr_partitions;
- char *name;
- int *nr_map;
- struct mtd_partition *partitions;
- struct nand_ecclayout *ecc_layout;
-};
-
-struct s3c2410_platform_nand {
- /* timing information for controller, all times in nanoseconds */
-
- int tacls; /* time for active CLE/ALE to nWE/nOE */
- int twrph0; /* active time for nWE/nOE */
- int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */
-
- unsigned int ignore_unset_ecc:1;
-
- int nr_sets;
- struct s3c2410_nand_set *sets;
-
- void (*select_chip)(struct s3c2410_nand_set *,
- int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
deleted file mode 100644
index ceba18d23a5a..000000000000
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_H
-#define __S3C64XX_PLAT_SPI_H
-
-struct platform_device;
-
-/**
- * struct s3c64xx_spi_csinfo - ChipSelect description
- * @fb_delay: Slave specific feedback delay.
- * Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
- *
- * This is per SPI-Slave Chipselect information.
- * Allocate and initialize one in machine init code and make the
- * spi_board_info.controller_data point to it.
- */
-struct s3c64xx_spi_csinfo {
- u8 fb_delay;
- unsigned line;
-};
-
-/**
- * struct s3c64xx_spi_info - SPI Controller defining structure
- * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @num_cs: Number of CS this controller emulates.
- * @cfg_gpio: Configure pins for this SPI controller.
- */
-struct s3c64xx_spi_info {
- int src_clk_nr;
- int num_cs;
- int (*cfg_gpio)(void);
-};
-
-/**
- * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
- * initialization code.
- * @cfg_gpio: Pointer to gpio setup function.
- * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
- * @num_cs: Number of elements in the 'cs' array.
- *
- * Call this from machine init code for each SPI Controller that
- * has some chips attached to it.
- */
-extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
-extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
-extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
-
-/* defined by architecture to configure gpio */
-extern int s3c64xx_spi0_cfg_gpio(void);
-extern int s3c64xx_spi1_cfg_gpio(void);
-extern int s3c64xx_spi2_cfg_gpio(void);
-
-extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
-#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h
deleted file mode 100644
index 26fdb22e0fc2..000000000000
--- a/arch/arm/plat-samsung/include/plat/ts.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
- int delay;
- int presc;
- int oversampling_shift;
- void (*cfg_gpio)(struct platform_device *dev);
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-/* defined by architecture to configure gpio */
-extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/plat-samsung/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h
deleted file mode 100644
index de8e2288a509..000000000000
--- a/arch/arm/plat-samsung/include/plat/udc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * Changelog:
- * 14-Mar-2005 RTP Created file
- * 02-Aug-2005 RTP File rename
- * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum
- * 18-Jan-2007 HMW Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
- S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */
- S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */
- S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
- void (*udc_command)(enum s3c2410_udc_cmd_e);
- void (*vbus_draw)(unsigned int ma);
-
- unsigned int pullup_pin;
- unsigned int pullup_pin_inverted;
-
- unsigned int vbus_pin;
- unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-struct s3c24xx_hsudc_platdata;
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/arch/arm/plat-samsung/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
deleted file mode 100644
index 7fa1fbefc3f2..000000000000
--- a/arch/arm/plat-samsung/include/plat/usb-control.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB host port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H
-
-#define S3C_HCDFLG_USED (1)
-
-struct s3c2410_hcd_port {
- unsigned char flags;
- unsigned char power;
- unsigned char oc_status;
- unsigned char oc_changed;
-};
-
-struct s3c2410_hcd_info {
- struct usb_hcd *hcd;
- struct s3c2410_hcd_port port[2];
-
- void (*power_control)(int port, int to);
- void (*enable_oc)(struct s3c2410_hcd_info *, int on);
- void (*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
- if (info->report_oc != NULL) {
- (info->report_oc)(info, ports);
- }
-}
-
-extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/plat-spear/include/plat/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h
deleted file mode 100644
index 9248e3a7e333..000000000000
--- a/arch/arm/plat-spear/include/plat/keyboard.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright (C) 2010 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_KEYBOARD_H
-#define __PLAT_KEYBOARD_H
-
-#include <linux/bitops.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/types.h>
-
-#define DECLARE_9x9_KEYMAP(_name) \
-int _name[] = { \
- KEY(0, 0, KEY_ESC), \
- KEY(0, 1, KEY_1), \
- KEY(0, 2, KEY_2), \
- KEY(0, 3, KEY_3), \
- KEY(0, 4, KEY_4), \
- KEY(0, 5, KEY_5), \
- KEY(0, 6, KEY_6), \
- KEY(0, 7, KEY_7), \
- KEY(0, 8, KEY_8), \
- KEY(1, 0, KEY_9), \
- KEY(1, 1, KEY_MINUS), \
- KEY(1, 2, KEY_EQUAL), \
- KEY(1, 3, KEY_BACKSPACE), \
- KEY(1, 4, KEY_TAB), \
- KEY(1, 5, KEY_Q), \
- KEY(1, 6, KEY_W), \
- KEY(1, 7, KEY_E), \
- KEY(1, 8, KEY_R), \
- KEY(2, 0, KEY_T), \
- KEY(2, 1, KEY_Y), \
- KEY(2, 2, KEY_U), \
- KEY(2, 3, KEY_I), \
- KEY(2, 4, KEY_O), \
- KEY(2, 5, KEY_P), \
- KEY(2, 6, KEY_LEFTBRACE), \
- KEY(2, 7, KEY_RIGHTBRACE), \
- KEY(2, 8, KEY_ENTER), \
- KEY(3, 0, KEY_LEFTCTRL), \
- KEY(3, 1, KEY_A), \
- KEY(3, 2, KEY_S), \
- KEY(3, 3, KEY_D), \
- KEY(3, 4, KEY_F), \
- KEY(3, 5, KEY_G), \
- KEY(3, 6, KEY_H), \
- KEY(3, 7, KEY_J), \
- KEY(3, 8, KEY_K), \
- KEY(4, 0, KEY_L), \
- KEY(4, 1, KEY_SEMICOLON), \
- KEY(4, 2, KEY_APOSTROPHE), \
- KEY(4, 3, KEY_GRAVE), \
- KEY(4, 4, KEY_LEFTSHIFT), \
- KEY(4, 5, KEY_BACKSLASH), \
- KEY(4, 6, KEY_Z), \
- KEY(4, 7, KEY_X), \
- KEY(4, 8, KEY_C), \
- KEY(5, 0, KEY_V), \
- KEY(5, 1, KEY_B), \
- KEY(5, 2, KEY_N), \
- KEY(5, 3, KEY_M), \
- KEY(5, 4, KEY_COMMA), \
- KEY(5, 5, KEY_DOT), \
- KEY(5, 6, KEY_SLASH), \
- KEY(5, 7, KEY_RIGHTSHIFT), \
- KEY(5, 8, KEY_KPASTERISK), \
- KEY(6, 0, KEY_LEFTALT), \
- KEY(6, 1, KEY_SPACE), \
- KEY(6, 2, KEY_CAPSLOCK), \
- KEY(6, 3, KEY_F1), \
- KEY(6, 4, KEY_F2), \
- KEY(6, 5, KEY_F3), \
- KEY(6, 6, KEY_F4), \
- KEY(6, 7, KEY_F5), \
- KEY(6, 8, KEY_F6), \
- KEY(7, 0, KEY_F7), \
- KEY(7, 1, KEY_F8), \
- KEY(7, 2, KEY_F9), \
- KEY(7, 3, KEY_F10), \
- KEY(7, 4, KEY_NUMLOCK), \
- KEY(7, 5, KEY_SCROLLLOCK), \
- KEY(7, 6, KEY_KP7), \
- KEY(7, 7, KEY_KP8), \
- KEY(7, 8, KEY_KP9), \
- KEY(8, 0, KEY_KPMINUS), \
- KEY(8, 1, KEY_KP4), \
- KEY(8, 2, KEY_KP5), \
- KEY(8, 3, KEY_KP6), \
- KEY(8, 4, KEY_KPPLUS), \
- KEY(8, 5, KEY_KP1), \
- KEY(8, 6, KEY_KP2), \
- KEY(8, 7, KEY_KP3), \
- KEY(8, 8, KEY_KP0), \
-}
-
-#define DECLARE_6x6_KEYMAP(_name) \
-int _name[] = { \
- KEY(0, 0, KEY_RESERVED), \
- KEY(0, 1, KEY_1), \
- KEY(0, 2, KEY_2), \
- KEY(0, 3, KEY_3), \
- KEY(0, 4, KEY_4), \
- KEY(0, 5, KEY_5), \
- KEY(1, 0, KEY_Q), \
- KEY(1, 1, KEY_W), \
- KEY(1, 2, KEY_E), \
- KEY(1, 3, KEY_R), \
- KEY(1, 4, KEY_T), \
- KEY(1, 5, KEY_Y), \
- KEY(2, 0, KEY_D), \
- KEY(2, 1, KEY_F), \
- KEY(2, 2, KEY_G), \
- KEY(2, 3, KEY_H), \
- KEY(2, 4, KEY_J), \
- KEY(2, 5, KEY_K), \
- KEY(3, 0, KEY_B), \
- KEY(3, 1, KEY_N), \
- KEY(3, 2, KEY_M), \
- KEY(3, 3, KEY_COMMA), \
- KEY(3, 4, KEY_DOT), \
- KEY(3, 5, KEY_SLASH), \
- KEY(4, 0, KEY_F6), \
- KEY(4, 1, KEY_F7), \
- KEY(4, 2, KEY_F8), \
- KEY(4, 3, KEY_F9), \
- KEY(4, 4, KEY_F10), \
- KEY(4, 5, KEY_NUMLOCK), \
- KEY(5, 0, KEY_KP2), \
- KEY(5, 1, KEY_KP3), \
- KEY(5, 2, KEY_KP0), \
- KEY(5, 3, KEY_KPDOT), \
- KEY(5, 4, KEY_RO), \
- KEY(5, 5, KEY_ZENKAKUHANKAKU), \
-}
-
-#define KEYPAD_9x9 0
-#define KEYPAD_6x6 1
-#define KEYPAD_2x2 2
-
-/**
- * struct kbd_platform_data - spear keyboard platform data
- * keymap: pointer to keymap data (table and size)
- * rep: enables key autorepeat
- * mode: choose keyboard support(9x9, 6x6, 2x2)
- * suspended_rate: rate at which keyboard would operate in suspended mode
- *
- * This structure is supposed to be used by platform code to supply
- * keymaps to drivers that implement keyboards.
- */
-struct kbd_platform_data {
- const struct matrix_keymap_data *keymap;
- bool rep;
- unsigned int mode;
- unsigned int suspended_rate;
-};
-
-#endif /* __PLAT_KEYBOARD_H */
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 272769a8a7d6..74cfd94cbf80 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
diff --git a/arch/arm/plat-versatile/include/plat/platsmp.h b/arch/arm/plat-versatile/include/plat/platsmp.h
new file mode 100644
index 000000000000..50fb830192e0
--- /dev/null
+++ b/arch/arm/plat-versatile/include/plat/platsmp.h
@@ -0,0 +1,14 @@
+/*
+ * linux/arch/arm/plat-versatile/include/plat/platsmp.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern void versatile_secondary_startup(void);
+extern void versatile_secondary_init(unsigned int cpu);
+extern int versatile_boot_secondary(unsigned int cpu, struct task_struct *idle);
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index d7c5c171f5aa..04ca4937d8ca 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -20,12 +20,6 @@
#include <asm/hardware/gic.h>
/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
-
-/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
* or not. This is necessary for the hotplug code to work reliably.
@@ -40,7 +34,7 @@ static void __cpuinit write_pen_release(int val)
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void __cpuinit versatile_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@@ -62,7 +56,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+int __cpuinit versatile_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;