Merge branch 'ux500-del-u5500-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/cleanup

Linus Walleij <linus.walleij@linaro.org> writes:
 Delete U5500 after obsoletion of this ASIC, including two patches to the MFD
 subsystem that have been  ACK:ed by Samuel Ortiz.

* 'ux500-del-u5500-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  mfd/ab5500: delete AB5500 support
  mfd/db5500-prcmu: delete DB5500 PRCMU support
  ARM: ux500: delete U5500 support

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

26 files changed, 11 insertions, 2635 deletions

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index ef7099eea0f2..0e8470a3fbeb 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -10,10 +10,6 @@ config UX500_SOC_COMMON
 	select ARM_ERRATA_764369
 	select CACHE_L2X0
 
-config UX500_SOC_DB5500
-	bool
-	select MFD_DB5500_PRCMU
-
 config UX500_SOC_DB8500
 	bool
 	select MFD_DB8500_PRCMU
@@ -45,15 +41,8 @@ config MACH_SNOWBALL
 	help
 	  Include support for the snowball development platform.
 
-config MACH_U5500
-	bool "U5500 Development platform"
-	select UX500_SOC_DB5500
-	help
-	  Include support for the U5500 development platform.
-
 config UX500_AUTO_PLATFORM
 	def_bool y
-	depends on !MACH_U5500
 	select MACH_MOP500
 	help
 	  At least one platform needs to be selected in order to build
@@ -74,18 +63,4 @@ config UX500_DEBUG_UART
 	  Choose the UART on which kernel low-level debug messages should be
 	  output.
 
-config U5500_MODEM_IRQ
-	bool "Modem IRQ support"
-	depends on UX500_SOC_DB5500
-	default y
-	help
-	  Add support for handling IRQ:s from modem side
-
-config U5500_MBOX
-	bool "Mailbox support"
-	depends on U5500_MODEM_IRQ
-	default y
-	help
-	  Add support for U5500 mailbox communication with modem side
-
 endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 465b9ec9510a..fc7db5df970b 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,16 +5,11 @@
 obj-y				:= clock.o cpu.o devices.o devices-common.o \
 				   id.o usb.o timer.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
-obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
 				board-mop500-uib.o board-mop500-stuib.o \
 				board-mop500-u8500uib.o \
 				board-mop500-pins.o
-obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem-irq-db5500.o
-obj-$(CONFIG_U5500_MBOX)	+= mbox-db5500.o
-
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
deleted file mode 100644
index 836112eedde7..000000000000
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <ulf.hansson@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
-#include <mach/db5500-regs.h>
-#include <plat/ste_dma40.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include "ste-dma40-db5500.h"
-
-static pin_cfg_t u5500_sdi_pins[] = {
-	/* SDI0 (POP eMMC) */
-	GPIO5_MC0_DAT0		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO6_MC0_DAT1		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO7_MC0_DAT2		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO8_MC0_DAT3		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO9_MC0_DAT4		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO10_MC0_DAT5		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO11_MC0_DAT6		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO12_MC0_DAT7		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO13_MC0_CMD		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO14_MC0_CLK		| PIN_DIR_OUTPUT | PIN_VAL_LOW,
-};
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-
-static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-#endif
-
-static struct mmci_platform_data u5500_sdi0_data = {
-	.ocr_mask	= MMC_VDD_165_195,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_8_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &u5500_sdi0_dma_cfg_rx,
-	.dma_tx_param	= &u5500_sdi0_dma_cfg_tx,
-#endif
-};
-
-void __init u5500_sdi_init(struct device *parent)
-{
-	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
-
-	db5500_add_sdi0(parent, &u5500_sdi0_data);
-}
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
deleted file mode 100644
index 0ff4be72a809..000000000000
--- a/arch/arm/mach-ux500/board-u5500.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/mfd/abx500/ab5500.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/pincfg.h>
-#include <plat/i2c.h>
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include <linux/led-lm3530.h>
-
-/*
- * GPIO
- */
-
-static pin_cfg_t u5500_pins[] = {
-	/* I2C */
-	GPIO218_I2C2_SCL        | PIN_INPUT_PULLUP,
-	GPIO219_I2C2_SDA        | PIN_INPUT_PULLUP,
-
-	/* DISPLAY_ENABLE */
-	GPIO226_GPIO        | PIN_OUTPUT_LOW,
-
-	/* Backlight Enbale */
-	GPIO224_GPIO        | PIN_OUTPUT_HIGH,
-};
-/*
- * I2C
- */
-
-#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u5500_i2c##id##_data = { \
-	/*				\
-	 * slave data setup time, which is	\
-	 * 250 ns,100ns,10ns which is 14,6,2	\
-	 * respectively for a 48 Mhz	\
-	 * i2c clock			\
-	 */				\
-	.slsu		= _slsu,	\
-	/* Tx FIFO threshold */		\
-	.tft		= _tft,		\
-	/* Rx FIFO threshold */		\
-	.rft		= _rft,		\
-	/* std. mode operation */	\
-	.clk_freq	= clk,		\
-	.sm		= _sm,		\
-}
-/*
- * The board uses TODO <3> i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
- * mode of operation
- */
-
-U5500_I2C_CONTROLLER(2,	0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST);
-
-static struct lm3530_platform_data u5500_als_platform_data = {
-	.mode = LM3530_BL_MODE_MANUAL,
-	.als_input_mode = LM3530_INPUT_ALS1,
-	.max_current = LM3530_FS_CURR_26mA,
-	.pwm_pol_hi = true,
-	.als_avrg_time = LM3530_ALS_AVRG_TIME_512ms,
-	.brt_ramp_law = 1,      /* Linear */
-	.brt_ramp_fall = LM3530_RAMP_TIME_8s,
-	.brt_ramp_rise = LM3530_RAMP_TIME_8s,
-	.als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm,
-	.als2_resistor_sel = LM3530_ALS_IMPD_Z,
-	.als_vmin = 730,	/* mV */
-	.als_vmax = 1020,	/* mV */
-	.brt_val = 0x7F,	/* Max brightness */
-};
-
-static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
-	{
-		/* Backlight */
-		I2C_BOARD_INFO("lm3530-led", 0x36),
-		.platform_data = &u5500_als_platform_data,
-	},
-};
-
-static void __init u5500_i2c_init(struct device *parent)
-{
-	db5500_add_i2c2(parent, &u5500_i2c2_data);
-	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
-}
-
-static struct ab5500_platform_data ab5500_plf_data = {
-	.irq = {
-		.base = 0,
-		.count = 0,
-	},
-	.init_settings = NULL,
-	.init_settings_sz = 0,
-	.pm_power_off = false,
-};
-
-static struct platform_device ab5500_device = {
-	.name = "ab5500-core",
-	.id = 0,
-	.dev = {
-		.platform_data = &ab5500_plf_data,
-	},
-	.num_resources = 0,
-};
-
-static struct platform_device *u5500_platform_devices[] __initdata = {
-	&ab5500_device,
-};
-
-static void __init u5500_uart_init(struct device *parent)
-{
-	db5500_add_uart0(parent, NULL);
-	db5500_add_uart1(parent, NULL);
-	db5500_add_uart2(parent, NULL);
-}
-
-static void __init u5500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	parent = u5500_init_devices();
-	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-
-	u5500_i2c_init(parent);
-	u5500_sdi_init(parent);
-	u5500_uart_init(parent);
-
-	for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
-		u5500_platform_devices[i]->dev.parent = parent;
-
-	platform_add_devices(u5500_platform_devices,
-		ARRAY_SIZE(u5500_platform_devices));
-}
-
-MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
-	.atag_offset	= 0x100,
-	.map_io		= u5500_map_io,
-	.init_irq	= ux500_init_irq,
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= u5500_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 77a75ed0df67..df91344aa2db 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -36,9 +36,7 @@ static int __init ux500_l2x0_unlock(void)
 
 static int __init ux500_l2x0_init(void)
 {
-	if (cpu_is_u5500())
-		l2x0_base = __io_address(U5500_L2CC_BASE);
-	else if (cpu_is_u8500())
+	if (cpu_is_u8500())
 		l2x0_base = __io_address(U8500_L2CC_BASE);
 	else
 		ux500_unknown_soc();
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index ec35f0aa5665..9feb6bc7f20e 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -149,9 +149,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
 	unsigned long mturate;
 	unsigned long retclk;
 
-	if (cpu_is_u5500())
-		addr = __io_address(U5500_PRCMU_BASE);
-	else if (cpu_is_u8500())
+	if (cpu_is_u8500())
 		addr = __io_address(U8500_PRCMU_BASE);
 	else
 		ux500_unknown_soc();
@@ -705,14 +703,6 @@ late_initcall(clk_init_smp_twd_cpufreq);
 
 int __init clk_init(void)
 {
-	if (cpu_is_u5500()) {
-		/* Clock tree for U5500 not implemented yet */
-		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
-		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
-		clk_uartclk.rate = 36360000;
-		clk_sdmmcclk.rate = 99900000;
-	}
-
 	clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
 	clkdev_add(&clk_smp_twd_lookup);
 
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
deleted file mode 100644
index bca47f32082f..000000000000
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <asm/mach/map.h>
-#include <asm/pmu.h>
-
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-#include <mach/irqs.h>
-#include <mach/usb.h>
-
-#include "devices-db5500.h"
-#include "ste-dma40-db5500.h"
-
-static struct map_desc u5500_uart_io_desc[] __initdata = {
-	__IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
-};
-
-static struct map_desc u5500_io_desc[] __initdata = {
-	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
-	__IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
-
-	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
-};
-
-static struct resource mbox0_resources[] = {
-	{
-		.name = "mbox_peer",
-		.start = U5500_MBOX0_PEER_START,
-		.end = U5500_MBOX0_PEER_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_local",
-		.start = U5500_MBOX0_LOCAL_START,
-		.end = U5500_MBOX0_LOCAL_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_irq",
-		.start = MBOX_PAIR0_VIRT_IRQ,
-		.end = MBOX_PAIR0_VIRT_IRQ,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource mbox1_resources[] = {
-	{
-		.name = "mbox_peer",
-		.start = U5500_MBOX1_PEER_START,
-		.end = U5500_MBOX1_PEER_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_local",
-		.start = U5500_MBOX1_LOCAL_START,
-		.end = U5500_MBOX1_LOCAL_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_irq",
-		.start = MBOX_PAIR1_VIRT_IRQ,
-		.end = MBOX_PAIR1_VIRT_IRQ,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource mbox2_resources[] = {
-	{
-		.name = "mbox_peer",
-		.start = U5500_MBOX2_PEER_START,
-		.end = U5500_MBOX2_PEER_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_local",
-		.start = U5500_MBOX2_LOCAL_START,
-		.end = U5500_MBOX2_LOCAL_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_irq",
-		.start = MBOX_PAIR2_VIRT_IRQ,
-		.end = MBOX_PAIR2_VIRT_IRQ,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device mbox0_device = {
-	.id = 0,
-	.name = "mbox",
-	.resource = mbox0_resources,
-	.num_resources = ARRAY_SIZE(mbox0_resources),
-};
-
-static struct platform_device mbox1_device = {
-	.id = 1,
-	.name = "mbox",
-	.resource = mbox1_resources,
-	.num_resources = ARRAY_SIZE(mbox1_resources),
-};
-
-static struct platform_device mbox2_device = {
-	.id = 2,
-	.name = "mbox",
-	.resource = mbox2_resources,
-	.num_resources = ARRAY_SIZE(mbox2_resources),
-};
-
-static struct platform_device *db5500_platform_devs[] __initdata = {
-	&mbox0_device,
-	&mbox1_device,
-	&mbox2_device,
-};
-
-static resource_size_t __initdata db5500_gpio_base[] = {
-	U5500_GPIOBANK0_BASE,
-	U5500_GPIOBANK1_BASE,
-	U5500_GPIOBANK2_BASE,
-	U5500_GPIOBANK3_BASE,
-	U5500_GPIOBANK4_BASE,
-	U5500_GPIOBANK5_BASE,
-	U5500_GPIOBANK6_BASE,
-	U5500_GPIOBANK7_BASE,
-};
-
-static void __init db5500_add_gpios(struct device *parent)
-{
-	struct nmk_gpio_platform_data pdata = {
-		/* No custom data yet */
-	};
-
-	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
-			 IRQ_DB5500_GPIO0, &pdata);
-}
-
-void __init u5500_map_io(void)
-{
-	/*
-	 * Map the UARTs early so that the DEBUG_LL stuff continues to work.
-	 */
-	iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc));
-
-	ux500_map_io();
-
-	iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
-
-	_PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
-}
-
-static void __init db5500_pmu_init(void)
-{
-	struct resource res[] = {
-		[0] = {
-			.start		= IRQ_DB5500_PMU0,
-			.end		= IRQ_DB5500_PMU0,
-			.flags		= IORESOURCE_IRQ,
-		},
-		[1] = {
-			.start		= IRQ_DB5500_PMU1,
-			.end		= IRQ_DB5500_PMU1,
-			.flags		= IORESOURCE_IRQ,
-		},
-	};
-
-	platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU,
-					res, ARRAY_SIZE(res));
-}
-
-static int usb_db5500_rx_dma_cfg[] = {
-	DB5500_DMA_DEV4_USB_OTG_IEP_1_9,
-	DB5500_DMA_DEV5_USB_OTG_IEP_2_10,
-	DB5500_DMA_DEV6_USB_OTG_IEP_3_11,
-	DB5500_DMA_DEV20_USB_OTG_IEP_4_12,
-	DB5500_DMA_DEV21_USB_OTG_IEP_5_13,
-	DB5500_DMA_DEV22_USB_OTG_IEP_6_14,
-	DB5500_DMA_DEV23_USB_OTG_IEP_7_15,
-	DB5500_DMA_DEV38_USB_OTG_IEP_8
-};
-
-static int usb_db5500_tx_dma_cfg[] = {
-	DB5500_DMA_DEV4_USB_OTG_OEP_1_9,
-	DB5500_DMA_DEV5_USB_OTG_OEP_2_10,
-	DB5500_DMA_DEV6_USB_OTG_OEP_3_11,
-	DB5500_DMA_DEV20_USB_OTG_OEP_4_12,
-	DB5500_DMA_DEV21_USB_OTG_OEP_5_13,
-	DB5500_DMA_DEV22_USB_OTG_OEP_6_14,
-	DB5500_DMA_DEV23_USB_OTG_OEP_7_15,
-	DB5500_DMA_DEV38_USB_OTG_OEP_8
-};
-
-static const char *db5500_read_soc_id(void)
-{
-	return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
-}
-
-static struct device * __init db5500_soc_device_init(void)
-{
-	const char *soc_id = db5500_read_soc_id();
-
-	return ux500_soc_device_init(soc_id);
-}
-
-struct device * __init u5500_init_devices(void)
-{
-	struct device *parent;
-	int i;
-
-	parent = db5500_soc_device_init();
-
-	db5500_add_gpios(parent);
-	db5500_pmu_init();
-	db5500_dma_init(parent);
-	db5500_add_rtc(parent);
-	db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
-
-	for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++)
-		db5500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(db5500_platform_devs,
-			     ARRAY_SIZE(db5500_platform_devs));
-
-	return parent;
-}
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d11f3892a27d..4b4e59b30d81 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -10,7 +10,6 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/mfd/db8500-prcmu.h>
-#include <linux/mfd/db5500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/sys_soc.h>
 #include <linux/err.h>
@@ -40,10 +39,7 @@ void __init ux500_init_irq(void)
 	void __iomem *dist_base;
 	void __iomem *cpu_base;
 
-	if (cpu_is_u5500()) {
-		dist_base = __io_address(U5500_GIC_DIST_BASE);
-		cpu_base = __io_address(U5500_GIC_CPU_BASE);
-	} else if (cpu_is_u8500()) {
+	if (cpu_is_u8500()) {
 		dist_base = __io_address(U8500_GIC_DIST_BASE);
 		cpu_base = __io_address(U8500_GIC_CPU_BASE);
 	} else
@@ -60,8 +56,6 @@ void __init ux500_init_irq(void)
 	 * Init clocks here so that they are available for system timer
 	 * initialization.
 	 */
-	if (cpu_is_u5500())
-		db5500_prcmu_early_init();
 	if (cpu_is_u8500())
 		db8500_prcmu_early_init();
 	clk_init();
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
deleted file mode 100644
index e70955502c35..000000000000
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_DB5500_H
-#define __DEVICES_DB5500_H
-
-#include "devices-common.h"
-
-#define db5500_add_i2c1(parent, pdata) \
-	dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(parent, pdata) \
-	dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(parent, pdata) \
-	dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
-
-#define db5500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
-			   IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
-			   IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
-			   IRQ_DB5500_MSP2, pdata)
-
-#define db5500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
-			  IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
-			  IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
-			  IRQ_DB5500_MSP2, pdata)
-
-#define db5500_add_rtc(parent) \
-	dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
-
-#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
-	ux500_add_usb(parent, U5500_USBOTG_BASE, \
-		      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
-
-#define db5500_add_sdi0(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
-		       IRQ_DB5500_SDMMC0, pdata,	\
-		       0x10480180)
-#define db5500_add_sdi1(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
-		       IRQ_DB5500_SDMMC1, pdata,	\
-		       0x10480180)
-#define db5500_add_sdi2(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
-		       IRQ_DB5500_SDMMC2, pdata		\
-		       0x10480180)
-#define db5500_add_sdi3(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
-		       IRQ_DB5500_SDMMC3, pdata		\
-		       0x10480180)
-#define db5500_add_sdi4(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
-		       IRQ_DB5500_SDMMC4, pdata		\
-		       0x10480180)
-
-/* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(parent, pdata) \
-	dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
-		       IRQ_DB5500_SPI0, pdata,		\
-		       0x10080023)
-#define db5500_add_spi1(parent, pdata) \
-	dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
-		       IRQ_DB5500_SPI1, pdata,		\
-		       0x10080023)
-#define db5500_add_spi2(parent, pdata) \
-	dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
-		       IRQ_DB5500_SPI2, pdata		\
-		       0x10080023)
-#define db5500_add_spi3(parent, pdata) \
-	dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
-		       IRQ_DB5500_SPI3, pdata		\
-		       0x10080023)
-
-#define db5500_add_uart0(parent, plat) \
-	dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
-			IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(parent, plat) \
-	dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
-			IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(parent, plat) \
-	dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
-			IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(parent, plat) \
-	dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
-			IRQ_DB5500_UART3, plat)
-
-#endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
deleted file mode 100644
index 41e9470fa0e6..000000000000
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/ste_dma40.h>
-#include <mach/setup.h>
-#include <mach/hardware.h>
-
-#include "ste-dma40-db5500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U5500_DMA_BASE,
-		.end   = U5500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U5500_DMA_LCPA_BASE,
-		.end   = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB5500_DMA,
-		.end   = IRQ_DB5500_DMA,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-/* Default configuration for physical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
-	.mode = STEDMA40_MODE_PHYSICAL,
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_PHY_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/* Default configuration for logical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between soruce event lines and physical device address This was
- * created assuming that the event line is tied to a device and therefore the
- * address is constant, however this is not true for at least USB, and the
- * values are just placeholders for USB.  This table is preserved and used for
- * now.
- */
-static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_RX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1,
-};
-
-/* Mapping between destination event lines and physical device address */
-static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_TX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1,
-};
-
-static int dma40_memcpy_event[] = {
-	DB5500_DMA_MEMCPY_TX_1,
-	DB5500_DMA_MEMCPY_TX_2,
-	DB5500_DMA_MEMCPY_TX_3,
-	DB5500_DMA_MEMCPY_TX_4,
-	DB5500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len		= ARRAY_SIZE(dma40_rx_map),
-	.dev_rx			= dma40_rx_map,
-	.dev_tx			= dma40_tx_map,
-	.memcpy			= dma40_memcpy_event,
-	.memcpy_len		= ARRAY_SIZE(dma40_memcpy_event),
-	.memcpy_conf_phy	= &dma40_memcpy_conf_phy,
-	.memcpy_conf_log	= &dma40_memcpy_conf_log,
-	.disabled_channels	= {-1},
-};
-
-static struct platform_device dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-	},
-	.name		= "dma40",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dma40_resources),
-	.resource	= dma40_resources
-};
-
-void __init db5500_dma_init(struct device *parent)
-{
-	int ret;
-
-	dma40_device.dev.parent = parent;
-	ret = platform_device_register(&dma40_device);
-	if (ret)
-		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
-
-}
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
deleted file mode 100644
index 8e714bcb099f..000000000000
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_DB5500_REGS_H
-#define __MACH_DB5500_REGS_H
-
-#define U5500_PER1_BASE		0xA0020000
-#define U5500_PER2_BASE		0xA0010000
-#define U5500_PER3_BASE		0x80140000
-#define U5500_PER4_BASE		0x80150000
-#define U5500_PER5_BASE		0x80100000
-#define U5500_PER6_BASE		0x80120000
-
-#define U5500_GIC_DIST_BASE	0xA0411000
-#define U5500_GIC_CPU_BASE	0xA0410100
-#define U5500_DMA_BASE		0x90030000
-#define U5500_STM_BASE		0x90020000
-#define U5500_STM_REG_BASE	(U5500_STM_BASE + 0xF000)
-#define U5500_MCDE_BASE		0xA0400000
-#define U5500_MODEM_BASE	0xB0000000
-#define U5500_L2CC_BASE		0xA0412000
-#define U5500_SCU_BASE		0xA0410000
-#define U5500_DSI1_BASE		0xA0401000
-#define U5500_DSI2_BASE		0xA0402000
-#define U5500_SIA_BASE		0xA0100000
-#define U5500_SVA_BASE		0x80200000
-#define U5500_HSEM_BASE		0xA0000000
-#define U5500_NAND0_BASE	0x60000000
-#define U5500_NAND1_BASE	0x70000000
-#define U5500_TWD_BASE		0xa0410600
-#define U5500_ICN_BASE		0xA0040000
-#define U5500_B2R2_BASE		0xa0200000
-#define U5500_BOOT_ROM_BASE	0x90000000
-
-#define U5500_FSMC_BASE		(U5500_PER1_BASE + 0x0000)
-#define U5500_SDI0_BASE		(U5500_PER1_BASE + 0x1000)
-#define U5500_SDI2_BASE		(U5500_PER1_BASE + 0x2000)
-#define U5500_UART0_BASE	(U5500_PER1_BASE + 0x3000)
-#define U5500_I2C1_BASE		(U5500_PER1_BASE + 0x4000)
-#define U5500_MSP0_BASE		(U5500_PER1_BASE + 0x5000)
-#define U5500_GPIO0_BASE	(U5500_PER1_BASE + 0xE000)
-#define U5500_CLKRST1_BASE	(U5500_PER1_BASE + 0xF000)
-
-#define U5500_USBOTG_BASE	(U5500_PER2_BASE + 0x0000)
-#define U5500_GPIO1_BASE	(U5500_PER2_BASE + 0xE000)
-#define U5500_CLKRST2_BASE	(U5500_PER2_BASE + 0xF000)
-
-#define U5500_KEYPAD_BASE	(U5500_PER3_BASE + 0x0000)
-#define U5500_PWM_BASE		(U5500_PER3_BASE + 0x1000)
-#define U5500_GPIO3_BASE	(U5500_PER3_BASE + 0xE000)
-#define U5500_CLKRST3_BASE	(U5500_PER3_BASE + 0xF000)
-
-#define U5500_BACKUPRAM0_BASE	(U5500_PER4_BASE + 0x0000)
-#define U5500_BACKUPRAM1_BASE	(U5500_PER4_BASE + 0x1000)
-#define U5500_RTT0_BASE		(U5500_PER4_BASE + 0x2000)
-#define U5500_RTT1_BASE		(U5500_PER4_BASE + 0x3000)
-#define U5500_RTC_BASE		(U5500_PER4_BASE + 0x4000)
-#define U5500_SCR_BASE		(U5500_PER4_BASE + 0x5000)
-#define U5500_DMC_BASE		(U5500_PER4_BASE + 0x6000)
-#define U5500_PRCMU_BASE	(U5500_PER4_BASE + 0x7000)
-#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
-#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
-#define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)
-#define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)
-#define U5500_MTIMER_BASE	(U5500_PER4_BASE + 0xC000)
-#define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)
-#define U5500_PRCMU_TCDM_BASE	(U5500_PER4_BASE + 0x18000)
-#define U5500_PRCMU_TCPM_BASE	(U5500_PER4_BASE + 0x10000)
-#define U5500_TPIU_BASE		(U5500_PER4_BASE + 0x50000)
-
-#define U5500_SPI0_BASE		(U5500_PER5_BASE + 0x0000)
-#define U5500_SPI1_BASE		(U5500_PER5_BASE + 0x1000)
-#define U5500_SPI2_BASE		(U5500_PER5_BASE + 0x2000)
-#define U5500_SPI3_BASE		(U5500_PER5_BASE + 0x3000)
-#define U5500_UART1_BASE	(U5500_PER5_BASE + 0x4000)
-#define U5500_UART2_BASE	(U5500_PER5_BASE + 0x5000)
-#define U5500_UART3_BASE	(U5500_PER5_BASE + 0x6000)
-#define U5500_SDI1_BASE		(U5500_PER5_BASE + 0x7000)
-#define U5500_SDI3_BASE		(U5500_PER5_BASE + 0x8000)
-#define U5500_SDI4_BASE		(U5500_PER5_BASE + 0x9000)
-#define U5500_I2C2_BASE		(U5500_PER5_BASE + 0xA000)
-#define U5500_I2C3_BASE		(U5500_PER5_BASE + 0xB000)
-#define U5500_MSP2_BASE		(U5500_PER5_BASE + 0xC000)
-#define U5500_IRDA_BASE		(U5500_PER5_BASE + 0xD000)
-#define U5500_IRRC_BASE		(U5500_PER5_BASE + 0x10000)
-#define U5500_GPIO4_BASE	(U5500_PER5_BASE + 0x1E000)
-#define U5500_CLKRST5_BASE	(U5500_PER5_BASE + 0x1F000)
-
-#define U5500_RNG_BASE		(U5500_PER6_BASE + 0x0000)
-#define U5500_HASH0_BASE	(U5500_PER6_BASE + 0x1000)
-#define U5500_HASH1_BASE	(U5500_PER6_BASE + 0x2000)
-#define U5500_PKA_BASE		(U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5100)
-#define U5500_MTU0_BASE		(U5500_PER6_BASE + 0x6000)
-#define U5500_MTU1_BASE		(U5500_PER6_BASE + 0x7000)
-#define U5500_CR_BASE		(U5500_PER6_BASE + 0x8000)
-#define U5500_CRYP0_BASE	(U5500_PER6_BASE + 0xA000)
-#define U5500_CRYP1_BASE	(U5500_PER6_BASE + 0xB000)
-#define U5500_CLKRST6_BASE	(U5500_PER6_BASE + 0xF000)
-
-#define U5500_GPIOBANK0_BASE	U5500_GPIO0_BASE
-#define U5500_GPIOBANK1_BASE	(U5500_GPIO0_BASE + 0x80)
-#define U5500_GPIOBANK2_BASE	U5500_GPIO1_BASE
-#define U5500_GPIOBANK3_BASE	U5500_GPIO2_BASE
-#define U5500_GPIOBANK4_BASE	U5500_GPIO3_BASE
-#define U5500_GPIOBANK5_BASE	U5500_GPIO4_BASE
-#define U5500_GPIOBANK6_BASE	(U5500_GPIO4_BASE + 0x80)
-#define U5500_GPIOBANK7_BASE	(U5500_GPIO4_BASE + 0x100)
-
-#define U5500_MBOX_BASE		(U5500_MODEM_BASE + 0xFFD1000)
-#define U5500_MBOX0_PEER_START	(U5500_MBOX_BASE + 0x40)
-#define U5500_MBOX0_PEER_END	(U5500_MBOX_BASE + 0x5F)
-#define U5500_MBOX0_LOCAL_START	(U5500_MBOX_BASE + 0x60)
-#define U5500_MBOX0_LOCAL_END	(U5500_MBOX_BASE + 0x7F)
-#define U5500_MBOX1_PEER_START	(U5500_MBOX_BASE + 0x80)
-#define U5500_MBOX1_PEER_END	(U5500_MBOX_BASE + 0x9F)
-#define U5500_MBOX1_LOCAL_START	(U5500_MBOX_BASE + 0xA0)
-#define U5500_MBOX1_LOCAL_END	(U5500_MBOX_BASE + 0xBF)
-#define U5500_MBOX2_PEER_START	(U5500_MBOX_BASE + 0x00)
-#define U5500_MBOX2_PEER_END	(U5500_MBOX_BASE + 0x1F)
-#define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
-#define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
-
-#define U5500_ACCCON_BASE_SEC	(0xBFFF0000)
-#define U5500_ACCCON_BASE		(0xBFFF1000)
-#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
-#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
-#define U5500_INTCON_MBOX1_INT_RESET_ADDR	(0xBFFD31A4)
-
-#define U5500_ESRAM_BASE	        0x40000000
-#define U5500_ESRAM_DMA_LCPA_OFFSET	0x10000
-#define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
-
-#define U5500_MCDE_SIZE		0x1000
-#define U5500_DSI_LINK_SIZE	0x1000
-#define U5500_DSI_LINK_COUNT	0x2
-#define U5500_DSI_LINK1_BASE	(U5500_MCDE_BASE + U5500_MCDE_SIZE)
-#define U5500_DSI_LINK2_BASE	(U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8d74d927d4e2..67035223334a 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -20,10 +20,6 @@
  * built, so that there's some hint during the build that something is wrong.
  */
 
-#ifdef CONFIG_UX500_SOC_DB5500
-#define __UX500_UART(n)	U5500_UART##n##_BASE
-#endif
-
 #ifdef CONFIG_UX500_SOC_DB8500
 #define __UX500_UART(n)	U8500_UART##n##_BASE
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 5f6cb71fc62d..9b5eb69a0154 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -10,7 +10,6 @@
 struct platform_device;
 struct amba_device;
 
-extern struct platform_device u5500_gpio_devs[];
 extern struct platform_device u8500_gpio_devs[];
 
 extern struct amba_device ux500_pl031_device;
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index f84698936d36..cf6fac3d1eeb 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -28,7 +28,6 @@
 #define io_p2v(n)		__io_address(n)
 
 #include <mach/db8500-regs.h>
-#include <mach/db5500-regs.h>
 
 #define MSP_TX_RX_REG_OFFSET	0
 
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
deleted file mode 100644
index 29d972c7717b..000000000000
--- a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_BOARD_U5500_H
-#define __MACH_IRQS_BOARD_U5500_H
-
-#define AB5500_NR_IRQS		5
-#define IRQ_AB5500_BASE		IRQ_BOARD_START
-#define IRQ_AB5500_END		(IRQ_AB5500_BASE + AB5500_NR_IRQS)
-
-#define U5500_IRQ_END		IRQ_AB5500_END
-
-#if IRQ_BOARD_END < U5500_IRQ_END
-#undef IRQ_BOARD_END
-#define IRQ_BOARD_END		U5500_IRQ_END
-#endif
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
deleted file mode 100644
index 77239776a6f2..000000000000
--- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_DB5500_H
-#define __MACH_IRQS_DB5500_H
-
-#define IRQ_DB5500_MTU0			(IRQ_SHPI_START + 4)
-#define IRQ_DB5500_SPI2			(IRQ_SHPI_START + 6)
-#define IRQ_DB5500_PMU0			(IRQ_SHPI_START + 7)
-#define IRQ_DB5500_SPI0			(IRQ_SHPI_START + 8)
-#define IRQ_DB5500_RTT			(IRQ_SHPI_START + 9)
-#define IRQ_DB5500_PKA			(IRQ_SHPI_START + 10)
-#define IRQ_DB5500_UART0		(IRQ_SHPI_START + 11)
-#define IRQ_DB5500_I2C3			(IRQ_SHPI_START + 12)
-#define IRQ_DB5500_L2CC			(IRQ_SHPI_START + 13)
-#define IRQ_DB5500_MSP0			(IRQ_SHPI_START + 14)
-#define IRQ_DB5500_CRYP1		(IRQ_SHPI_START + 15)
-#define IRQ_DB5500_PMU1			(IRQ_SHPI_START + 16)
-#define IRQ_DB5500_MTU1			(IRQ_SHPI_START + 17)
-#define IRQ_DB5500_RTC			(IRQ_SHPI_START + 18)
-#define IRQ_DB5500_UART1		(IRQ_SHPI_START + 19)
-#define IRQ_DB5500_USB_WAKEUP		(IRQ_SHPI_START + 20)
-#define IRQ_DB5500_I2C0			(IRQ_SHPI_START + 21)
-#define IRQ_DB5500_I2C1			(IRQ_SHPI_START + 22)
-#define IRQ_DB5500_USBOTG		(IRQ_SHPI_START + 23)
-#define IRQ_DB5500_DMA_SECURE		(IRQ_SHPI_START + 24)
-#define IRQ_DB5500_DMA			(IRQ_SHPI_START + 25)
-#define IRQ_DB5500_UART2		(IRQ_SHPI_START + 26)
-#define IRQ_DB5500_ICN_PMU1		(IRQ_SHPI_START + 27)
-#define IRQ_DB5500_ICN_PMU2		(IRQ_SHPI_START + 28)
-#define IRQ_DB5500_UART3		(IRQ_SHPI_START + 29)
-#define IRQ_DB5500_SPI3			(IRQ_SHPI_START + 30)
-#define IRQ_DB5500_SDMMC4		(IRQ_SHPI_START + 31)
-#define IRQ_DB5500_IRRC			(IRQ_SHPI_START + 33)
-#define IRQ_DB5500_IRDA_FT		(IRQ_SHPI_START + 34)
-#define IRQ_DB5500_IRDA_SD		(IRQ_SHPI_START + 35)
-#define IRQ_DB5500_IRDA_FI		(IRQ_SHPI_START + 36)
-#define IRQ_DB5500_IRDA_FD		(IRQ_SHPI_START + 37)
-#define IRQ_DB5500_FSMC_CODEREADY	(IRQ_SHPI_START + 38)
-#define IRQ_DB5500_FSMC_NANDWAIT	(IRQ_SHPI_START + 39)
-#define IRQ_DB5500_AB5500		(IRQ_SHPI_START + 40)
-#define IRQ_DB5500_SDMMC2		(IRQ_SHPI_START + 41)
-#define IRQ_DB5500_SIA			(IRQ_SHPI_START + 42)
-#define IRQ_DB5500_SIA2			(IRQ_SHPI_START + 43)
-#define IRQ_DB5500_HVA			(IRQ_SHPI_START + 44)
-#define IRQ_DB5500_HVA2			(IRQ_SHPI_START + 45)
-#define IRQ_DB5500_PRCMU0		(IRQ_SHPI_START + 46)
-#define IRQ_DB5500_PRCMU1		(IRQ_SHPI_START + 47)
-#define IRQ_DB5500_DISP			(IRQ_SHPI_START + 48)
-#define IRQ_DB5500_SDMMC1		(IRQ_SHPI_START + 50)
-#define IRQ_DB5500_MSP1			(IRQ_SHPI_START + 52)
-#define IRQ_DB5500_KBD			(IRQ_SHPI_START + 53)
-#define IRQ_DB5500_I2C2			(IRQ_SHPI_START + 55)
-#define IRQ_DB5500_B2R2			(IRQ_SHPI_START + 56)
-#define IRQ_DB5500_CRYP0		(IRQ_SHPI_START + 57)
-#define IRQ_DB5500_SDMMC3		(IRQ_SHPI_START + 59)
-#define IRQ_DB5500_SDMMC0		(IRQ_SHPI_START + 60)
-#define IRQ_DB5500_HSEM			(IRQ_SHPI_START + 61)
-#define IRQ_DB5500_SBAG			(IRQ_SHPI_START + 63)
-#define IRQ_DB5500_MODEM		(IRQ_SHPI_START + 65)
-#define IRQ_DB5500_SPI1			(IRQ_SHPI_START + 96)
-#define IRQ_DB5500_MSP2			(IRQ_SHPI_START + 98)
-#define IRQ_DB5500_SRPTIMER		(IRQ_SHPI_START + 101)
-#define IRQ_DB5500_CTI0			(IRQ_SHPI_START + 108)
-#define IRQ_DB5500_CTI1			(IRQ_SHPI_START + 109)
-#define IRQ_DB5500_ICN_ERR		(IRQ_SHPI_START + 110)
-#define IRQ_DB5500_MALI_PPMMU		(IRQ_SHPI_START + 112)
-#define IRQ_DB5500_MALI_PP		(IRQ_SHPI_START + 113)
-#define IRQ_DB5500_MALI_GPMMU		(IRQ_SHPI_START + 114)
-#define IRQ_DB5500_MALI_GP		(IRQ_SHPI_START + 115)
-#define IRQ_DB5500_MALI			(IRQ_SHPI_START + 116)
-#define IRQ_DB5500_PRCMU_SEM		(IRQ_SHPI_START + 118)
-#define IRQ_DB5500_GPIO0		(IRQ_SHPI_START + 119)
-#define IRQ_DB5500_GPIO1		(IRQ_SHPI_START + 120)
-#define IRQ_DB5500_GPIO2		(IRQ_SHPI_START + 121)
-#define IRQ_DB5500_GPIO3		(IRQ_SHPI_START + 122)
-#define IRQ_DB5500_GPIO4		(IRQ_SHPI_START + 123)
-#define IRQ_DB5500_GPIO5		(IRQ_SHPI_START + 124)
-#define IRQ_DB5500_GPIO6		(IRQ_SHPI_START + 125)
-#define IRQ_DB5500_GPIO7		(IRQ_SHPI_START + 126)
-
-#ifdef CONFIG_UX500_SOC_DB5500
-
-/*
- * After the GPIO ones we reserve a range of IRQ:s in which virtual
- * IRQ:s representing modem IRQ:s can be allocated
- */
-#define IRQ_MODEM_EVENTS_BASE	IRQ_SOC_START
-#define IRQ_MODEM_EVENTS_NBR	72
-#define IRQ_MODEM_EVENTS_END	(IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
-
-/* List of virtual IRQ:s that are allocated from the range above */
-#define MBOX_PAIR0_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 43)
-#define MBOX_PAIR1_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 45)
-#define MBOX_PAIR2_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 41)
-
-/*
- * We may have several SoCs, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_SOC_START remains the same for either SoC.
- */
-#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
-#undef IRQ_SOC_END
-#define IRQ_SOC_END		IRQ_MODEM_EVENTS_END
-#endif
-
-#endif /* CONFIG_UX500_SOC_DB5500 */
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index c23a6b5f0c4e..d06dcf6208fa 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -36,7 +36,6 @@
 /* This will be overridden by SoC-specific irq headers */
 #define IRQ_SOC_END		IRQ_SOC_START
 
-#include <mach/irqs-db5500.h>
 #include <mach/irqs-db8500.h>
 
 #define IRQ_BOARD_START		IRQ_SOC_END
@@ -47,10 +46,6 @@
 #include <mach/irqs-board-mop500.h>
 #endif
 
-#ifdef CONFIG_MACH_U5500
-#include <mach/irqs-board-u5500.h>
-#endif
-
 #define NR_IRQS			IRQ_BOARD_END
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h
deleted file mode 100644
index 7f9da4d2fbda..000000000000
--- a/arch/arm/mach-ux500/include/mach/mbox-db5500.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __INC_STE_MBOX_H
-#define __INC_STE_MBOX_H
-
-#define MBOX_BUF_SIZE 16
-#define MBOX_NAME_SIZE 8
-
-/**
-  * mbox_recv_cb_t - Definition of the mailbox callback.
-  * @mbox_msg:	The mailbox message.
-  * @priv:	The clients private data as specified in the call to mbox_setup.
-  *
-  * This function will be called upon reception of new mailbox messages.
-  */
-typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
-
-/**
-  * struct mbox - Mailbox instance struct
-  * @list:		Linked list head.
-  * @pdev:		Pointer to device struct.
-  * @cb:		Callback function. Will be called
-  *			when new data is received.
-  * @client_data:	Clients private data. Will be sent back
-  *			in the callback function.
-  * @virtbase_peer:	Virtual address for outgoing mailbox.
-  * @virtbase_local:	Virtual address for incoming mailbox.
-  * @buffer:		Then internal queue for outgoing messages.
-  * @name:		Name of this mailbox.
-  * @buffer_available:	Completion variable to achieve "blocking send".
-  *			This variable will be signaled when there is
-  *			internal buffer space available.
-  * @client_blocked:	To keep track if any client is currently
-  *			blocked.
-  * @lock:		Spinlock to protect this mailbox instance.
-  * @write_index:	Index in internal buffer to write to.
-  * @read_index:	Index in internal buffer to read from.
-  * @allocated:		Indicates whether this particular mailbox
-  *			id has been allocated by someone.
-  */
-struct mbox {
-	struct list_head list;
-	struct platform_device *pdev;
-	mbox_recv_cb_t *cb;
-	void *client_data;
-	void __iomem *virtbase_peer;
-	void __iomem *virtbase_local;
-	u32 buffer[MBOX_BUF_SIZE];
-	char name[MBOX_NAME_SIZE];
-	struct completion buffer_available;
-	u8 client_blocked;
-	spinlock_t lock;
-	u8 write_index;
-	u8 read_index;
-	bool allocated;
-};
-
-/**
-  * mbox_setup - Set up a mailbox and return its instance.
-  * @mbox_id:	The ID number of the mailbox. 0 or 1 for modem CPU,
-  *		2 for modem DSP.
-  * @mbox_cb:	Pointer to the callback function to be called when a new message
-  *		is received.
-  * @priv:	Client user data which will be returned in the callback.
-  *
-  * Returns a mailbox instance to be specified in subsequent calls to mbox_send.
-  */
-struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
-
-/**
-  * mbox_send - Send a mailbox message.
-  * @mbox:	Mailbox instance (returned by mbox_setup)
-  * @mbox_msg:	The mailbox message to send.
-  * @block:	Specifies whether this call will block until send is possible,
-  *		or return an error if the mailbox buffer is full.
-  *
-  * Returns 0 on success or a negative error code on error. -ENOMEM indicates
-  * that the internal buffer is full and you have to try again later (or
-  * specify "block" in order to block until send is possible).
-  */
-int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
-
-#endif /*INC_STE_MBOX_H*/
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 3dc00ffa7bfa..4e369f1645ec 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -15,18 +15,12 @@
 #include <linux/init.h>
 
 void __init ux500_map_io(void);
-extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern struct device * __init u5500_init_devices(void);
 extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
-extern void __init u5500_sdi_init(struct device *parent);
-
-extern void __init db5500_dma_init(struct device *parent);
-
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
 struct amba_device;
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 6fb3c4b0105d..34775baadaea 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -50,11 +50,8 @@ static void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
-	/* Check in run time if we run on an U8500 or U5500 */
-	if (machine_is_u5500())
-		ux500_uart_base = U5500_UART0_BASE;
-	else
-		ux500_uart_base = U8500_UART2_BASE;
+	/* Use machine_is_foo() macro if you need to switch base someday */
+	ux500_uart_base = U8500_UART2_BASE;
 }
 
 #define arch_decomp_wdog() /* nothing to do here */
diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c
deleted file mode 100644
index 2b2d51caf9d8..000000000000
--- a/arch/arm/mach-ux500/mbox-db5500.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-/*
- * Mailbox nomenclature:
- *
- *       APE           MODEM
- *           mbox pairX
- *   ..........................
- *   .                       .
- *   .           peer        .
- *   .     send  ----        .
- *   .      -->  |  |        .
- *   .           |  |        .
- *   .           ----        .
- *   .                       .
- *   .           local       .
- *   .     rec   ----        .
- *   .           |  | <--    .
- *   .           |  |        .
- *   .           ----        .
- *   .........................
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/completion.h>
-#include <mach/mbox-db5500.h>
-
-#define MBOX_NAME "mbox"
-
-#define MBOX_FIFO_DATA        0x000
-#define MBOX_FIFO_ADD         0x004
-#define MBOX_FIFO_REMOVE      0x008
-#define MBOX_FIFO_THRES_FREE  0x00C
-#define MBOX_FIFO_THRES_OCCUP 0x010
-#define MBOX_FIFO_STATUS      0x014
-
-#define MBOX_DISABLE_IRQ 0x4
-#define MBOX_ENABLE_IRQ  0x0
-#define MBOX_LATCH 1
-
-/* Global list of all mailboxes */
-static struct list_head mboxs = LIST_HEAD_INIT(mboxs);
-
-static struct mbox *get_mbox_with_id(u8 id)
-{
-	u8 i;
-	struct list_head *pos = &mboxs;
-	for (i = 0; i <= id; i++)
-		pos = pos->next;
-
-	return (struct mbox *) list_entry(pos, struct mbox, list);
-}
-
-int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block)
-{
-	int res = 0;
-
-	spin_lock(&mbox->lock);
-
-	dev_dbg(&(mbox->pdev->dev),
-		"About to buffer 0x%X to mailbox 0x%X."
-		" ri = %d, wi = %d\n",
-		mbox_msg, (u32)mbox, mbox->read_index,
-		mbox->write_index);
-
-	/* Check if write buffer is full */
-	while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) {
-		if (!block) {
-			dev_dbg(&(mbox->pdev->dev),
-			"Buffer full in non-blocking call! "
-			"Returning -ENOMEM!\n");
-			res = -ENOMEM;
-			goto exit;
-		}
-		spin_unlock(&mbox->lock);
-		dev_dbg(&(mbox->pdev->dev),
-			"Buffer full in blocking call! Sleeping...\n");
-		mbox->client_blocked = 1;
-		wait_for_completion(&mbox->buffer_available);
-		dev_dbg(&(mbox->pdev->dev),
-			"Blocking send was woken up! Trying again...\n");
-		spin_lock(&mbox->lock);
-	}
-
-	mbox->buffer[mbox->write_index] = mbox_msg;
-	mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE;
-
-	/*
-	 * Indicate that we want an IRQ as soon as there is a slot
-	 * in the FIFO
-	 */
-	writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-
-exit:
-	spin_unlock(&mbox->lock);
-	return res;
-}
-EXPORT_SYMBOL(mbox_send);
-
-#if defined(CONFIG_DEBUG_FS)
-/*
- * Expected input: <value> <nbr sends>
- * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times
- */
-static ssize_t mbox_write_fifo(struct device *dev,
-			       struct device_attribute *attr,
-			       const char *buf,
-			       size_t count)
-{
-	unsigned long mbox_mess;
-	unsigned long nbr_sends;
-	unsigned long i;
-	char int_buf[16];
-	char *token;
-	char *val;
-
-	struct mbox *mbox = (struct mbox *) dev->platform_data;
-
-	strncpy((char *) &int_buf, buf, sizeof(int_buf));
-	token = (char *) &int_buf;
-
-	/* Parse message */
-	val = strsep(&token, " ");
-	if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0))
-		mbox_mess = 0xDEADBEEF;
-
-	val = strsep(&token, " ");
-	if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0))
-		nbr_sends = 1;
-
-	dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n",
-		mbox_mess, nbr_sends, (u32) mbox);
-
-	for (i = 0; i < nbr_sends; i++)
-		mbox_send(mbox, mbox_mess, true);
-
-	return count;
-}
-
-static ssize_t mbox_read_fifo(struct device *dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	int mbox_value;
-	struct mbox *mbox = (struct mbox *) dev->platform_data;
-
-	if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0)
-		return sprintf(buf, "Mailbox is empty\n");
-
-	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
-	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
-
-	return sprintf(buf, "0x%X\n", mbox_value);
-}
-
-static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
-
-static int mbox_show(struct seq_file *s, void *data)
-{
-	struct list_head *pos;
-	u8 mbox_index = 0;
-
-	list_for_each(pos, &mboxs) {
-		struct mbox *m =
-			(struct mbox *) list_entry(pos, struct mbox, list);
-		if (m == NULL) {
-			seq_printf(s,
-				   "Unable to retrieve mailbox %d\n",
-				   mbox_index);
-			continue;
-		}
-
-		spin_lock(&m->lock);
-		if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) {
-			seq_printf(s, "MAILBOX %d not setup or corrupt\n",
-				   mbox_index);
-			spin_unlock(&m->lock);
-			continue;
-		}
-
-		seq_printf(s,
-		"===========================\n"
-		" MAILBOX %d\n"
-		" PEER MAILBOX DUMP\n"
-		"---------------------------\n"
-		"FIFO:                 0x%X (%d)\n"
-		"Free     Threshold:   0x%.2X (%d)\n"
-		"Occupied Threshold:   0x%.2X (%d)\n"
-		"Status:               0x%.2X (%d)\n"
-		"   Free spaces  (ot):    %d (%d)\n"
-		"   Occup spaces (ot):    %d (%d)\n"
-		"===========================\n"
-		" LOCAL MAILBOX DUMP\n"
-		"---------------------------\n"
-		"FIFO:                 0x%.X (%d)\n"
-		"Free     Threshold:   0x%.2X (%d)\n"
-		"Occupied Threshold:   0x%.2X (%d)\n"
-		"Status:               0x%.2X (%d)\n"
-		"   Free spaces  (ot):    %d (%d)\n"
-		"   Occup spaces (ot):    %d (%d)\n"
-		"===========================\n"
-		"write_index: %d\n"
-		"read_index : %d\n"
-		"===========================\n"
-		"\n",
-		mbox_index,
-		readl(m->virtbase_peer + MBOX_FIFO_DATA),
-		readl(m->virtbase_peer + MBOX_FIFO_DATA),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
-		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7,
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1,
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7,
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1,
-		readl(m->virtbase_local + MBOX_FIFO_DATA),
-		readl(m->virtbase_local + MBOX_FIFO_DATA),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_local + MBOX_FIFO_STATUS),
-		readl(m->virtbase_local + MBOX_FIFO_STATUS),
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7,
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1,
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7,
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1,
-		m->write_index, m->read_index);
-		mbox_index++;
-		spin_unlock(&m->lock);
-	}
-
-	return 0;
-}
-
-static int mbox_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, mbox_show, NULL);
-}
-
-static const struct file_operations mbox_operations = {
-	.owner = THIS_MODULE,
-	.open = mbox_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-#endif
-
-static irqreturn_t mbox_irq(int irq, void *arg)
-{
-	u32 mbox_value;
-	int nbr_occup;
-	int nbr_free;
-	struct mbox *mbox = (struct mbox *) arg;
-
-	spin_lock(&mbox->lock);
-
-	dev_dbg(&(mbox->pdev->dev),
-		"mbox IRQ [%d] received. ri = %d, wi = %d\n",
-		irq, mbox->read_index, mbox->write_index);
-
-	/*
-	 * Check if we have any outgoing messages, and if there is space for
-	 * them in the FIFO.
-	 */
-	if (mbox->read_index != mbox->write_index) {
-		/*
-		 * Check by reading FREE for LOCAL since that indicates
-		 * OCCUP for PEER
-		 */
-		nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS)
-			    >> 4) & 0x7;
-		dev_dbg(&(mbox->pdev->dev),
-			"Status indicates %d empty spaces in the FIFO!\n",
-			nbr_free);
-
-		while ((nbr_free > 0) &&
-		       (mbox->read_index != mbox->write_index)) {
-			/* Write the message and latch it into the FIFO */
-			writel(mbox->buffer[mbox->read_index],
-			       (mbox->virtbase_peer + MBOX_FIFO_DATA));
-			writel(MBOX_LATCH,
-			       (mbox->virtbase_peer + MBOX_FIFO_ADD));
-			dev_dbg(&(mbox->pdev->dev),
-				"Wrote message 0x%X to addr 0x%X\n",
-				mbox->buffer[mbox->read_index],
-				(u32) (mbox->virtbase_peer + MBOX_FIFO_DATA));
-
-			nbr_free--;
-			mbox->read_index =
-				(mbox->read_index + 1) % MBOX_BUF_SIZE;
-		}
-
-		/*
-		 * Check if we still want IRQ:s when there is free
-		 * space to send
-		 */
-		if (mbox->read_index != mbox->write_index) {
-			dev_dbg(&(mbox->pdev->dev),
-				"Still have messages to send, but FIFO full. "
-				"Request IRQ again!\n");
-			writel(MBOX_ENABLE_IRQ,
-			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-		} else {
-			dev_dbg(&(mbox->pdev->dev),
-				"No more messages to send. "
-				"Do not request IRQ again!\n");
-			writel(MBOX_DISABLE_IRQ,
-			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-		}
-
-		/*
-		 * Check if we can signal any blocked clients that it is OK to
-		 * start buffering again
-		 */
-		if (mbox->client_blocked &&
-		    (((mbox->write_index + 1) % MBOX_BUF_SIZE)
-		     != mbox->read_index)) {
-			dev_dbg(&(mbox->pdev->dev),
-				"Waking up blocked client\n");
-			complete(&mbox->buffer_available);
-			mbox->client_blocked = 0;
-		}
-	}
-
-	/* Check if we have any incoming messages */
-	nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7;
-	if (nbr_occup == 0)
-		goto exit;
-
-	if (mbox->cb == NULL) {
-		dev_dbg(&(mbox->pdev->dev), "No receive callback registered, "
-			"leaving %d incoming messages in fifo!\n", nbr_occup);
-		goto exit;
-	}
-
-	/* Read and acknowledge the message */
-	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
-	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
-
-	/* Notify consumer of new mailbox message */
-	dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n",
-		mbox_value);
-	mbox->cb(mbox_value, mbox->client_data);
-
-exit:
-	dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n",
-		mbox->read_index, mbox->write_index);
-	spin_unlock(&mbox->lock);
-
-	return IRQ_HANDLED;
-}
-
-/* Setup is executed once for each mbox pair */
-struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv)
-{
-	struct resource *resource;
-	int irq;
-	int res;
-	struct mbox *mbox;
-
-	mbox = get_mbox_with_id(mbox_id);
-	if (mbox == NULL) {
-		dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n",
-			mbox_id);
-		goto exit;
-	}
-
-	/*
-	 * Check if mailbox has been allocated to someone else,
-	 * otherwise allocate it
-	 */
-	if (mbox->allocated) {
-		dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n",
-			mbox_id);
-		mbox = NULL;
-		goto exit;
-	}
-	mbox->allocated = true;
-
-	dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n",
-		mbox_id, (u32)mbox);
-
-	mbox->client_data = priv;
-	mbox->cb = mbox_cb;
-
-	/* Get addr for peer mailbox and ioremap it */
-	resource = platform_get_resource_byname(mbox->pdev,
-						IORESOURCE_MEM,
-						"mbox_peer");
-	if (resource == NULL) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to retrieve mbox peer resource\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"Resource name: %s start: 0x%X, end: 0x%X\n",
-		resource->name, resource->start, resource->end);
-	mbox->virtbase_peer = ioremap(resource->start, resource_size(resource));
-	if (!mbox->virtbase_peer) {
-		dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n",
-		resource->start, resource->end, (u32) mbox->virtbase_peer);
-
-	/* Get addr for local mailbox and ioremap it */
-	resource = platform_get_resource_byname(mbox->pdev,
-						IORESOURCE_MEM,
-						"mbox_local");
-	if (resource == NULL) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to retrieve mbox local resource\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"Resource name: %s start: 0x%X, end: 0x%X\n",
-		resource->name, resource->start, resource->end);
-	mbox->virtbase_local = ioremap(resource->start, resource_size(resource));
-	if (!mbox->virtbase_local) {
-		dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n",
-		resource->start, resource->end, (u32) mbox->virtbase_peer);
-
-	init_completion(&mbox->buffer_available);
-	mbox->client_blocked = 0;
-
-	/* Get IRQ for mailbox and allocate it */
-	irq = platform_get_irq_byname(mbox->pdev, "mbox_irq");
-	if (irq < 0) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to retrieve mbox irq resource\n");
-		mbox = NULL;
-		goto exit;
-	}
-
-	dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq);
-	res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox);
-	if (res < 0) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to allocate mbox irq %d\n", irq);
-		mbox = NULL;
-		goto exit;
-	}
-
-	/* Set up mailbox to not launch IRQ on free space in mailbox */
-	writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-
-	/*
-	 * Set up mailbox to launch IRQ on new message if we have
-	 * a callback set. If not, do not raise IRQ, but keep message
-	 * in FIFO for manual retrieval
-	 */
-	if (mbox_cb != NULL)
-		writel(MBOX_ENABLE_IRQ,
-		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
-	else
-		writel(MBOX_DISABLE_IRQ,
-		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
-
-#if defined(CONFIG_DEBUG_FS)
-	res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo);
-	if (res != 0)
-		dev_warn(&(mbox->pdev->dev),
-			 "Unable to create mbox sysfs entry");
-
-	(void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL,
-				   NULL, &mbox_operations);
-#endif
-
-	dev_info(&(mbox->pdev->dev),
-		 "Mailbox driver with index %d initiated!\n", mbox_id);
-
-exit:
-	return mbox;
-}
-EXPORT_SYMBOL(mbox_setup);
-
-
-int __init mbox_probe(struct platform_device *pdev)
-{
-	struct mbox local_mbox;
-	struct mbox *mbox;
-	int res = 0;
-	dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev);
-
-	memset(&local_mbox, 0x0, sizeof(struct mbox));
-
-	/* Associate our mbox data with the platform device */
-	res = platform_device_add_data(pdev,
-				       (void *) &local_mbox,
-				       sizeof(struct mbox));
-	if (res != 0) {
-		dev_err(&(pdev->dev),
-			"Unable to allocate driver platform data!\n");
-		goto exit;
-	}
-
-	mbox = (struct mbox *) pdev->dev.platform_data;
-	mbox->pdev = pdev;
-	mbox->write_index = 0;
-	mbox->read_index = 0;
-
-	INIT_LIST_HEAD(&(mbox->list));
-	list_add_tail(&(mbox->list), &mboxs);
-
-	sprintf(mbox->name, "%s", MBOX_NAME);
-	spin_lock_init(&mbox->lock);
-
-	dev_info(&(pdev->dev), "Mailbox driver loaded\n");
-
-exit:
-	return res;
-}
-
-static struct platform_driver mbox_driver = {
-	.driver = {
-		.name = MBOX_NAME,
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init mbox_init(void)
-{
-	return platform_driver_probe(&mbox_driver, mbox_probe);
-}
-
-module_init(mbox_init);
-
-void __exit mbox_exit(void)
-{
-	platform_driver_unregister(&mbox_driver);
-}
-
-module_exit(mbox_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MBOX driver");
diff --git a/arch/arm/mach-ux500/modem-irq-db5500.c b/arch/arm/mach-ux500/modem-irq-db5500.c
deleted file mode 100644
index 6b86416c94c9..000000000000
--- a/arch/arm/mach-ux500/modem-irq-db5500.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <mach/id.h>
-
-#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
-#define MODEM_INTCON_SIZE 0xFFF
-
-#define DEST_IRQ41_OFFSET 0x2A4
-#define DEST_IRQ43_OFFSET 0x2AC
-#define DEST_IRQ45_OFFSET 0x2B4
-
-#define PRIO_IRQ41_OFFSET 0x6A4
-#define PRIO_IRQ43_OFFSET 0x6AC
-#define PRIO_IRQ45_OFFSET 0x6B4
-
-#define ALLOW_IRQ_OFFSET 0x104
-
-#define MODEM_INTCON_CPU_NBR 0x1
-#define MODEM_INTCON_PRIO_HIGH 0x0
-
-#define MODEM_INTCON_ALLOW_IRQ41 0x0200
-#define MODEM_INTCON_ALLOW_IRQ43 0x0800
-#define MODEM_INTCON_ALLOW_IRQ45 0x2000
-
-#define MODEM_IRQ_REG_OFFSET 0x4
-
-struct modem_irq {
-	void __iomem *modem_intcon_base;
-};
-
-
-static void setup_modem_intcon(void __iomem *modem_intcon_base)
-{
-	/* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */
-	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET);
-	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET);
-	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET);
-
-	/* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */
-	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET);
-	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET);
-	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET);
-
-	/* IC_ALLOW_ARRAY - IRQ enable */
-	writel(MODEM_INTCON_ALLOW_IRQ41 |
-		   MODEM_INTCON_ALLOW_IRQ43 |
-		   MODEM_INTCON_ALLOW_IRQ45,
-		   modem_intcon_base + ALLOW_IRQ_OFFSET);
-}
-
-static irqreturn_t modem_cpu_irq_handler(int irq, void *data)
-{
-	int real_irq;
-	int virt_irq;
-	struct modem_irq *mi = (struct modem_irq *)data;
-
-	/* Read modem side IRQ number from modem IRQ controller */
-	real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF;
-	virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq;
-
-	pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X "
-		 "which will be 0x%X (%d) which translates to "
-		 "virtual IRQ 0x%X (%d)!\n",
-		   (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET,
-		   real_irq,
-		   real_irq & 0xFF,
-		   real_irq & 0xFF,
-		   virt_irq,
-		   virt_irq);
-
-	if (virt_irq != 0)
-		generic_handle_irq(virt_irq);
-
-	pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq);
-
-	return IRQ_HANDLED;
-}
-
-static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip)
-{
-	irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq);
-	set_irq_flags(irq, IRQF_VALID);
-
-	pr_debug("modem_irq: Created virtual IRQ %d\n", irq);
-}
-
-static int modem_irq_init(void)
-{
-	int err;
-	static struct irq_chip  modem_irq_chip;
-	struct modem_irq *mi;
-
-	if (!cpu_is_u5500())
-		return -ENODEV;
-
-	pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
-		   IRQ_DB5500_MODEM);
-
-	mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL);
-	if (!mi) {
-		pr_err("modem_irq: Could not allocate device\n");
-		return -ENOMEM;
-	}
-
-	mi->modem_intcon_base =
-		ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE);
-	pr_debug("modem_irq: ioremapped modem_intcon_base from "
-		 "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR,
-		 (u32)mi->modem_intcon_base);
-
-	setup_modem_intcon(mi->modem_intcon_base);
-
-	modem_irq_chip = dummy_irq_chip;
-	modem_irq_chip.name = "modem_irq";
-
-	/* Create the virtual IRQ:s needed */
-	create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip);
-	create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip);
-	create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip);
-
-	err = request_threaded_irq(IRQ_DB5500_MODEM, NULL,
-				   modem_cpu_irq_handler, IRQF_ONESHOT,
-				   "modem_irq", mi);
-	if (err)
-		pr_err("modem_irq: Could not register IRQ %d\n",
-		       IRQ_DB5500_MODEM);
-
-	return 0;
-}
-
-arch_initcall(modem_irq_init);
diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h
deleted file mode 100644
index bf50c21fe69d..000000000000
--- a/arch/arm/mach-ux500/pins-db5500.h
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- */
-
-#ifndef __MACH_DB5500_PINS_H
-#define __MACH_DB5500_PINS_H
-
-#define GPIO0_GPIO		PIN_CFG(0, GPIO)
-#define GPIO0_SM_CS3n		PIN_CFG(0, ALT_A)
-
-#define GPIO1_GPIO		PIN_CFG(1, GPIO)
-#define GPIO1_SM_A3		PIN_CFG(1, ALT_A)
-
-#define GPIO2_GPIO		PIN_CFG(2, GPIO)
-#define GPIO2_SM_A4		PIN_CFG(2, ALT_A)
-#define GPIO2_SM_AVD		PIN_CFG(2, ALT_B)
-
-#define GPIO3_GPIO		PIN_CFG(3, GPIO)
-#define GPIO3_I2C1_SCL		PIN_CFG(3, ALT_A)
-
-#define GPIO4_GPIO		PIN_CFG(4, GPIO)
-#define GPIO4_I2C1_SDA		PIN_CFG(4, ALT_A)
-
-#define GPIO5_GPIO		PIN_CFG(5, GPIO)
-#define GPIO5_MC0_DAT0		PIN_CFG(5, ALT_A)
-#define GPIO5_SM_ADQ8		PIN_CFG(5, ALT_B)
-
-#define GPIO6_GPIO		PIN_CFG(6, GPIO)
-#define GPIO6_MC0_DAT1		PIN_CFG(6, ALT_A)
-#define GPIO6_SM_ADQ0		PIN_CFG(6, ALT_B)
-
-#define GPIO7_GPIO		PIN_CFG(7, GPIO)
-#define GPIO7_MC0_DAT2		PIN_CFG(7, ALT_A)
-#define GPIO7_SM_ADQ9		PIN_CFG(7, ALT_B)
-
-#define GPIO8_GPIO		PIN_CFG(8, GPIO)
-#define GPIO8_MC0_DAT3		PIN_CFG(8, ALT_A)
-#define GPIO8_SM_ADQ1		PIN_CFG(8, ALT_B)
-
-#define GPIO9_GPIO		PIN_CFG(9, GPIO)
-#define GPIO9_MC0_DAT4		PIN_CFG(9, ALT_A)
-#define GPIO9_SM_ADQ10		PIN_CFG(9, ALT_B)
-
-#define GPIO10_GPIO		PIN_CFG(10, GPIO)
-#define GPIO10_MC0_DAT5		PIN_CFG(10, ALT_A)
-#define GPIO10_SM_ADQ2		PIN_CFG(10, ALT_B)
-
-#define GPIO11_GPIO		PIN_CFG(11, GPIO)
-#define GPIO11_MC0_DAT6		PIN_CFG(11, ALT_A)
-#define GPIO11_SM_ADQ11		PIN_CFG(11, ALT_B)
-
-#define GPIO12_GPIO		PIN_CFG(12, GPIO)
-#define GPIO12_MC0_DAT7		PIN_CFG(12, ALT_A)
-#define GPIO12_SM_ADQ3		PIN_CFG(12, ALT_B)
-
-#define GPIO13_GPIO		PIN_CFG(13, GPIO)
-#define GPIO13_MC0_CMD		PIN_CFG(13, ALT_A)
-#define GPIO13_SM_BUSY0n	PIN_CFG(13, ALT_B)
-#define GPIO13_SM_WAIT0n	PIN_CFG(13, ALT_C)
-
-#define GPIO14_GPIO		PIN_CFG(14, GPIO)
-#define GPIO14_MC0_CLK		PIN_CFG(14, ALT_A)
-#define GPIO14_SM_CS1n		PIN_CFG(14, ALT_B)
-#define GPIO14_SM_CKO		PIN_CFG(14, ALT_C)
-
-#define GPIO15_GPIO		PIN_CFG(15, GPIO)
-#define GPIO15_SM_A5		PIN_CFG(15, ALT_A)
-#define GPIO15_SM_CLE		PIN_CFG(15, ALT_B)
-
-#define GPIO16_GPIO		PIN_CFG(16, GPIO)
-#define GPIO16_MC2_CMD		PIN_CFG(16, ALT_A)
-#define GPIO16_SM_OEn		PIN_CFG(16, ALT_B)
-
-#define GPIO17_GPIO		PIN_CFG(17, GPIO)
-#define GPIO17_MC2_CLK		PIN_CFG(17, ALT_A)
-#define GPIO17_SM_WEn		PIN_CFG(17, ALT_B)
-
-#define GPIO18_GPIO		PIN_CFG(18, GPIO)
-#define GPIO18_SM_A6		PIN_CFG(18, ALT_A)
-#define GPIO18_SM_ALE		PIN_CFG(18, ALT_B)
-#define GPIO18_SM_AVDn		PIN_CFG(18, ALT_C)
-
-#define GPIO19_GPIO		PIN_CFG(19, GPIO)
-#define GPIO19_MC2_DAT1		PIN_CFG(19, ALT_A)
-#define GPIO19_SM_ADQ4		PIN_CFG(19, ALT_B)
-
-#define GPIO20_GPIO		PIN_CFG(20, GPIO)
-#define GPIO20_MC2_DAT3		PIN_CFG(20, ALT_A)
-#define GPIO20_SM_ADQ5		PIN_CFG(20, ALT_B)
-
-#define GPIO21_GPIO		PIN_CFG(21, GPIO)
-#define GPIO21_MC2_DAT5		PIN_CFG(21, ALT_A)
-#define GPIO21_SM_ADQ6		PIN_CFG(21, ALT_B)
-
-#define GPIO22_GPIO		PIN_CFG(22, GPIO)
-#define GPIO22_MC2_DAT7		PIN_CFG(22, ALT_A)
-#define GPIO22_SM_ADQ7		PIN_CFG(22, ALT_B)
-
-#define GPIO23_GPIO		PIN_CFG(23, GPIO)
-#define GPIO23_MC2_DAT0		PIN_CFG(23, ALT_A)
-#define GPIO23_SM_ADQ12		PIN_CFG(23, ALT_B)
-#define GPIO23_MC0_DAT1		PIN_CFG(23, ALT_C)
-
-#define GPIO24_GPIO		PIN_CFG(24, GPIO)
-#define GPIO24_MC2_DAT2		PIN_CFG(24, ALT_A)
-#define GPIO24_SM_ADQ13		PIN_CFG(24, ALT_B)
-#define GPIO24_MC0_DAT3		PIN_CFG(24, ALT_C)
-
-#define GPIO25_GPIO		PIN_CFG(25, GPIO)
-#define GPIO25_MC2_DAT4		PIN_CFG(25, ALT_A)
-#define GPIO25_SM_ADQ14		PIN_CFG(25, ALT_B)
-#define GPIO25_MC0_CMD		PIN_CFG(25, ALT_C)
-
-#define GPIO26_GPIO		PIN_CFG(26, GPIO)
-#define GPIO26_MC2_DAT6		PIN_CFG(26, ALT_A)
-#define GPIO26_SM_ADQ15		PIN_CFG(26, ALT_B)
-
-#define GPIO27_GPIO		PIN_CFG(27, GPIO)
-#define GPIO27_SM_CS0n		PIN_CFG(27, ALT_A)
-#define GPIO27_SM_PS0n		PIN_CFG(27, ALT_B)
-
-#define GPIO28_GPIO		PIN_CFG(28, GPIO)
-#define GPIO28_U0_TXD		PIN_CFG(28, ALT_A)
-#define GPIO28_SM_A0		PIN_CFG(28, ALT_B)
-
-#define GPIO29_GPIO		PIN_CFG(29, GPIO)
-#define GPIO29_U0_RXD		PIN_CFG(29, ALT_A)
-#define GPIO29_SM_A1		PIN_CFG(29, ALT_B)
-#define GPIO29_PWM_0		PIN_CFG(29, ALT_C)
-
-#define GPIO30_GPIO		PIN_CFG(30, GPIO)
-#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
-#define GPIO30_SM_A2		PIN_CFG(30, ALT_B)
-#define GPIO30_PWM_1		PIN_CFG(30, ALT_C)
-
-#define GPIO31_GPIO		PIN_CFG(31, GPIO)
-#define GPIO31_MC0_DAT7		PIN_CFG(31, ALT_A)
-#define GPIO31_SM_CS2n		PIN_CFG(31, ALT_B)
-#define GPIO31_PWM_2		PIN_CFG(31, ALT_C)
-
-#define GPIO32_GPIO		PIN_CFG(32, GPIO)
-#define GPIO32_MSP0_TCK		PIN_CFG(32, ALT_A)
-#define GPIO32_ACCI2S0_SCK	PIN_CFG(32, ALT_B)
-
-#define GPIO33_GPIO		PIN_CFG(33, GPIO)
-#define GPIO33_MSP0_TFS		PIN_CFG(33, ALT_A)
-#define GPIO33_ACCI2S0_WS	PIN_CFG(33, ALT_B)
-
-#define GPIO34_GPIO		PIN_CFG(34, GPIO)
-#define GPIO34_MSP0_TXD		PIN_CFG(34, ALT_A)
-#define GPIO34_ACCI2S0_DLD	PIN_CFG(34, ALT_B)
-
-#define GPIO35_GPIO		PIN_CFG(35, GPIO)
-#define GPIO35_MSP0_RXD		PIN_CFG(35, ALT_A)
-#define GPIO35_ACCI2S0_ULD	PIN_CFG(35, ALT_B)
-
-#define GPIO64_GPIO		PIN_CFG(64, GPIO)
-#define GPIO64_USB_DAT0		PIN_CFG(64, ALT_A)
-#define GPIO64_U0_TXD		PIN_CFG(64, ALT_B)
-
-#define GPIO65_GPIO		PIN_CFG(65, GPIO)
-#define GPIO65_USB_DAT1		PIN_CFG(65, ALT_A)
-#define GPIO65_U0_RXD		PIN_CFG(65, ALT_B)
-
-#define GPIO66_GPIO		PIN_CFG(66, GPIO)
-#define GPIO66_USB_DAT2		PIN_CFG(66, ALT_A)
-
-#define GPIO67_GPIO		PIN_CFG(67, GPIO)
-#define GPIO67_USB_DAT3		PIN_CFG(67, ALT_A)
-
-#define GPIO68_GPIO		PIN_CFG(68, GPIO)
-#define GPIO68_USB_DAT4		PIN_CFG(68, ALT_A)
-
-#define GPIO69_GPIO		PIN_CFG(69, GPIO)
-#define GPIO69_USB_DAT5		PIN_CFG(69, ALT_A)
-
-#define GPIO70_GPIO		PIN_CFG(70, GPIO)
-#define GPIO70_USB_DAT6		PIN_CFG(70, ALT_A)
-
-#define GPIO71_GPIO		PIN_CFG(71, GPIO)
-#define GPIO71_USB_DAT7		PIN_CFG(71, ALT_A)
-
-#define GPIO72_GPIO		PIN_CFG(72, GPIO)
-#define GPIO72_USB_STP		PIN_CFG(72, ALT_A)
-
-#define GPIO73_GPIO		PIN_CFG(73, GPIO)
-#define GPIO73_USB_DIR		PIN_CFG(73, ALT_A)
-
-#define GPIO74_GPIO		PIN_CFG(74, GPIO)
-#define GPIO74_USB_NXT		PIN_CFG(74, ALT_A)
-
-#define GPIO75_GPIO		PIN_CFG(75, GPIO)
-#define GPIO75_USB_XCLK		PIN_CFG(75, ALT_A)
-
-#define GPIO76_GPIO		PIN_CFG(76, GPIO)
-
-#define GPIO77_GPIO		PIN_CFG(77, GPIO)
-#define GPIO77_ACCTX_ON		PIN_CFG(77, ALT_A)
-
-#define GPIO78_GPIO		PIN_CFG(78, GPIO)
-#define GPIO78_IRQn		PIN_CFG(78, ALT_A)
-
-#define GPIO79_GPIO		PIN_CFG(79, GPIO)
-#define GPIO79_ACCSIM_Clk	PIN_CFG(79, ALT_A)
-
-#define GPIO80_GPIO		PIN_CFG(80, GPIO)
-#define GPIO80_ACCSIM_Da	PIN_CFG(80, ALT_A)
-
-#define GPIO81_GPIO		PIN_CFG(81, GPIO)
-#define GPIO81_ACCSIM_Reset	PIN_CFG(81, ALT_A)
-
-#define GPIO82_GPIO		PIN_CFG(82, GPIO)
-#define GPIO82_ACCSIM_DDir	PIN_CFG(82, ALT_A)
-
-#define GPIO96_GPIO		PIN_CFG(96, GPIO)
-#define GPIO96_MSP1_TCK		PIN_CFG(96, ALT_A)
-#define GPIO96_PRCMU_DEBUG3	PIN_CFG(96, ALT_B)
-#define GPIO96_PRCMU_DEBUG7	PIN_CFG(96, ALT_C)
-
-#define GPIO97_GPIO		PIN_CFG(97, GPIO)
-#define GPIO97_MSP1_TFS		PIN_CFG(97, ALT_A)
-#define GPIO97_PRCMU_DEBUG2	PIN_CFG(97, ALT_B)
-#define GPIO97_PRCMU_DEBUG6	PIN_CFG(97, ALT_C)
-
-#define GPIO98_GPIO		PIN_CFG(98, GPIO)
-#define GPIO98_MSP1_TXD		PIN_CFG(98, ALT_A)
-#define GPIO98_PRCMU_DEBUG1	PIN_CFG(98, ALT_B)
-#define GPIO98_PRCMU_DEBUG5	PIN_CFG(98, ALT_C)
-
-#define GPIO99_GPIO		PIN_CFG(99, GPIO)
-#define GPIO99_MSP1_RXD		PIN_CFG(99, ALT_A)
-#define GPIO99_PRCMU_DEBUG0	PIN_CFG(99, ALT_B)
-#define GPIO99_PRCMU_DEBUG4	PIN_CFG(99, ALT_C)
-
-#define GPIO100_GPIO		PIN_CFG(100, GPIO)
-#define GPIO100_I2C0_SCL	PIN_CFG(100, ALT_A)
-
-#define GPIO101_GPIO		PIN_CFG(101, GPIO)
-#define GPIO101_I2C0_SDA	PIN_CFG(101, ALT_A)
-
-#define GPIO128_GPIO		PIN_CFG(128, GPIO)
-#define GPIO128_KP_I0		PIN_CFG(128, ALT_A)
-#define GPIO128_BUSMON_D0	PIN_CFG(128, ALT_B)
-
-#define GPIO129_GPIO		PIN_CFG(129, GPIO)
-#define GPIO129_KP_O0		PIN_CFG(129, ALT_A)
-#define GPIO129_BUSMON_D1	PIN_CFG(129, ALT_B)
-
-#define GPIO130_GPIO		PIN_CFG(130, GPIO)
-#define GPIO130_KP_I1		PIN_CFG(130, ALT_A)
-#define GPIO130_BUSMON_D2	PIN_CFG(130, ALT_B)
-
-#define GPIO131_GPIO		PIN_CFG(131, GPIO)
-#define GPIO131_KP_O1		PIN_CFG(131, ALT_A)
-#define GPIO131_BUSMON_D3	PIN_CFG(131, ALT_B)
-
-#define GPIO132_GPIO		PIN_CFG(132, GPIO)
-#define GPIO132_KP_I2		PIN_CFG(132, ALT_A)
-#define GPIO132_ETM_D15		PIN_CFG(132, ALT_B)
-#define GPIO132_STMAPE_CLK	PIN_CFG(132, ALT_C)
-
-#define GPIO133_GPIO		PIN_CFG(133, GPIO)
-#define GPIO133_KP_O2		PIN_CFG(133, ALT_A)
-#define GPIO133_ETM_D14		PIN_CFG(133, ALT_B)
-#define GPIO133_U0_RXD		PIN_CFG(133, ALT_C)
-
-#define GPIO134_GPIO		PIN_CFG(134, GPIO)
-#define GPIO134_KP_I3		PIN_CFG(134, ALT_A)
-#define GPIO134_ETM_D13		PIN_CFG(134, ALT_B)
-#define GPIO134_STMAPE_DAT0	PIN_CFG(134, ALT_C)
-
-#define GPIO135_GPIO		PIN_CFG(135, GPIO)
-#define GPIO135_KP_O3		PIN_CFG(135, ALT_A)
-#define GPIO135_ETM_D12		PIN_CFG(135, ALT_B)
-#define GPIO135_STMAPE_DAT1	PIN_CFG(135, ALT_C)
-
-#define GPIO136_GPIO		PIN_CFG(136, GPIO)
-#define GPIO136_KP_I4		PIN_CFG(136, ALT_A)
-#define GPIO136_ETM_D11		PIN_CFG(136, ALT_B)
-#define GPIO136_STMAPE_DAT2	PIN_CFG(136, ALT_C)
-
-#define GPIO137_GPIO		PIN_CFG(137, GPIO)
-#define GPIO137_KP_O4		PIN_CFG(137, ALT_A)
-#define GPIO137_ETM_D10		PIN_CFG(137, ALT_B)
-#define GPIO137_STMAPE_DAT3	PIN_CFG(137, ALT_C)
-
-#define GPIO138_GPIO		PIN_CFG(138, GPIO)
-#define GPIO138_KP_I5		PIN_CFG(138, ALT_A)
-#define GPIO138_ETM_D9		PIN_CFG(138, ALT_B)
-#define GPIO138_U0_TXD		PIN_CFG(138, ALT_C)
-
-#define GPIO139_GPIO		PIN_CFG(139, GPIO)
-#define GPIO139_KP_O5		PIN_CFG(139, ALT_A)
-#define GPIO139_ETM_D8		PIN_CFG(139, ALT_B)
-#define GPIO139_BUSMON_D11	PIN_CFG(139, ALT_C)
-
-#define GPIO140_GPIO		PIN_CFG(140, GPIO)
-#define GPIO140_KP_I6		PIN_CFG(140, ALT_A)
-#define GPIO140_ETM_D7		PIN_CFG(140, ALT_B)
-#define GPIO140_STMAPE_CLK	PIN_CFG(140, ALT_C)
-
-#define GPIO141_GPIO		PIN_CFG(141, GPIO)
-#define GPIO141_KP_O6		PIN_CFG(141, ALT_A)
-#define GPIO141_ETM_D6		PIN_CFG(141, ALT_B)
-#define GPIO141_U0_RXD		PIN_CFG(141, ALT_C)
-
-#define GPIO142_GPIO		PIN_CFG(142, GPIO)
-#define GPIO142_KP_I7		PIN_CFG(142, ALT_A)
-#define GPIO142_ETM_D5		PIN_CFG(142, ALT_B)
-#define GPIO142_STMAPE_DAT0	PIN_CFG(142, ALT_C)
-
-#define GPIO143_GPIO		PIN_CFG(143, GPIO)
-#define GPIO143_KP_O7		PIN_CFG(143, ALT_A)
-#define GPIO143_ETM_D4		PIN_CFG(143, ALT_B)
-#define GPIO143_STMAPE_DAT1	PIN_CFG(143, ALT_C)
-
-#define GPIO144_GPIO		PIN_CFG(144, GPIO)
-#define GPIO144_I2C3_SCL	PIN_CFG(144, ALT_A)
-#define GPIO144_ETM_D3		PIN_CFG(144, ALT_B)
-#define GPIO144_STMAPE_DAT2	PIN_CFG(144, ALT_C)
-
-#define GPIO145_GPIO		PIN_CFG(145, GPIO)
-#define GPIO145_I2C3_SDA	PIN_CFG(145, ALT_A)
-#define GPIO145_ETM_D2		PIN_CFG(145, ALT_B)
-#define GPIO145_STMAPE_DAT3	PIN_CFG(145, ALT_C)
-
-#define GPIO146_GPIO		PIN_CFG(146, GPIO)
-#define GPIO146_PWM_0		PIN_CFG(146, ALT_A)
-#define GPIO146_ETM_D1		PIN_CFG(146, ALT_B)
-
-#define GPIO147_GPIO		PIN_CFG(147, GPIO)
-#define GPIO147_PWM_1		PIN_CFG(147, ALT_A)
-#define GPIO147_ETM_D0		PIN_CFG(147, ALT_B)
-
-#define GPIO148_GPIO		PIN_CFG(148, GPIO)
-#define GPIO148_PWM_2		PIN_CFG(148, ALT_A)
-#define GPIO148_ETM_CLK		PIN_CFG(148, ALT_B)
-
-#define GPIO160_GPIO		PIN_CFG(160, GPIO)
-#define GPIO160_CLKOUT_REQn	PIN_CFG(160, ALT_A)
-
-#define GPIO161_GPIO		PIN_CFG(161, GPIO)
-#define GPIO161_CLKOUT_0	PIN_CFG(161, ALT_A)
-
-#define GPIO162_GPIO		PIN_CFG(162, GPIO)
-#define GPIO162_CLKOUT_1	PIN_CFG(162, ALT_A)
-
-#define GPIO163_GPIO		PIN_CFG(163, GPIO)
-
-#define GPIO164_GPIO		PIN_CFG(164, GPIO)
-#define GPIO164_GPS_START	PIN_CFG(164, ALT_A)
-
-#define GPIO165_GPIO		PIN_CFG(165, GPIO)
-#define GPIO165_SPI1_CS2n	PIN_CFG(165, ALT_A)
-#define GPIO165_U3_RXD		PIN_CFG(165, ALT_B)
-#define GPIO165_BUSMON_D20	PIN_CFG(165, ALT_C)
-
-#define GPIO166_GPIO		PIN_CFG(166, GPIO)
-#define GPIO166_SPI1_CS1n	PIN_CFG(166, ALT_A)
-#define GPIO166_U3_TXD		PIN_CFG(166, ALT_B)
-#define GPIO166_BUSMON_D21	PIN_CFG(166, ALT_C)
-
-#define GPIO167_GPIO		PIN_CFG(167, GPIO)
-#define GPIO167_SPI1_CS0n	PIN_CFG(167, ALT_A)
-#define GPIO167_U3_RTSn		PIN_CFG(167, ALT_B)
-#define GPIO167_BUSMON_D22	PIN_CFG(167, ALT_C)
-
-#define GPIO168_GPIO		PIN_CFG(168, GPIO)
-#define GPIO168_SPI1_RXD	PIN_CFG(168, ALT_A)
-#define GPIO168_U3_CTSn		PIN_CFG(168, ALT_B)
-#define GPIO168_BUSMON_D23	PIN_CFG(168, ALT_C)
-
-#define GPIO169_GPIO		PIN_CFG(169, GPIO)
-#define GPIO169_SPI1_TXD	PIN_CFG(169, ALT_A)
-#define GPIO169_DDR_RC		PIN_CFG(169, ALT_B)
-#define GPIO169_BUSMON_D24	PIN_CFG(169, ALT_C)
-
-#define GPIO170_GPIO		PIN_CFG(170, GPIO)
-#define GPIO170_SPI1_CLK	PIN_CFG(170, ALT_A)
-
-#define GPIO171_GPIO		PIN_CFG(171, GPIO)
-#define GPIO171_MC3_DAT0	PIN_CFG(171, ALT_A)
-#define GPIO171_SPI3_RXD	PIN_CFG(171, ALT_B)
-#define GPIO171_BUSMON_D25	PIN_CFG(171, ALT_C)
-
-#define GPIO172_GPIO		PIN_CFG(172, GPIO)
-#define GPIO172_MC3_DAT1	PIN_CFG(172, ALT_A)
-#define GPIO172_SPI3_CS1n	PIN_CFG(172, ALT_B)
-#define GPIO172_BUSMON_D26	PIN_CFG(172, ALT_C)
-
-#define GPIO173_GPIO		PIN_CFG(173, GPIO)
-#define GPIO173_MC3_DAT2	PIN_CFG(173, ALT_A)
-#define GPIO173_SPI3_CS2n	PIN_CFG(173, ALT_B)
-#define GPIO173_BUSMON_D27	PIN_CFG(173, ALT_C)
-
-#define GPIO174_GPIO		PIN_CFG(174, GPIO)
-#define GPIO174_MC3_DAT3	PIN_CFG(174, ALT_A)
-#define GPIO174_SPI3_CS0n	PIN_CFG(174, ALT_B)
-#define GPIO174_BUSMON_D28	PIN_CFG(174, ALT_C)
-
-#define GPIO175_GPIO		PIN_CFG(175, GPIO)
-#define GPIO175_MC3_CMD		PIN_CFG(175, ALT_A)
-#define GPIO175_SPI3_TXD	PIN_CFG(175, ALT_B)
-#define GPIO175_BUSMON_D29	PIN_CFG(175, ALT_C)
-
-#define GPIO176_GPIO		PIN_CFG(176, GPIO)
-#define GPIO176_MC3_CLK		PIN_CFG(176, ALT_A)
-#define GPIO176_SPI3_CLK	PIN_CFG(176, ALT_B)
-
-#define GPIO177_GPIO		PIN_CFG(177, GPIO)
-#define GPIO177_U2_RXD		PIN_CFG(177, ALT_A)
-#define GPIO177_I2C3_SCL	PIN_CFG(177, ALT_B)
-#define GPIO177_BUSMON_D30	PIN_CFG(177, ALT_C)
-
-#define GPIO178_GPIO		PIN_CFG(178, GPIO)
-#define GPIO178_U2_TXD		PIN_CFG(178, ALT_A)
-#define GPIO178_I2C3_SDA	PIN_CFG(178, ALT_B)
-#define GPIO178_BUSMON_D31	PIN_CFG(178, ALT_C)
-
-#define GPIO179_GPIO		PIN_CFG(179, GPIO)
-#define GPIO179_U2_CTSn		PIN_CFG(179, ALT_A)
-#define GPIO179_U3_RXD		PIN_CFG(179, ALT_B)
-#define GPIO179_BUSMON_D32	PIN_CFG(179, ALT_C)
-
-#define GPIO180_GPIO		PIN_CFG(180, GPIO)
-#define GPIO180_U2_RTSn		PIN_CFG(180, ALT_A)
-#define GPIO180_U3_TXD		PIN_CFG(180, ALT_B)
-#define GPIO180_BUSMON_D33	PIN_CFG(180, ALT_C)
-
-#define GPIO185_GPIO		PIN_CFG(185, GPIO)
-#define GPIO185_SPI3_CS2n	PIN_CFG(185, ALT_A)
-#define GPIO185_MC4_DAT0	PIN_CFG(185, ALT_B)
-
-#define GPIO186_GPIO		PIN_CFG(186, GPIO)
-#define GPIO186_SPI3_CS1n	PIN_CFG(186, ALT_A)
-#define GPIO186_MC4_DAT1	PIN_CFG(186, ALT_B)
-
-#define GPIO187_GPIO		PIN_CFG(187, GPIO)
-#define GPIO187_SPI3_CS0n	PIN_CFG(187, ALT_A)
-#define GPIO187_MC4_DAT2	PIN_CFG(187, ALT_B)
-
-#define GPIO188_GPIO		PIN_CFG(188, GPIO)
-#define GPIO188_SPI3_RXD	PIN_CFG(188, ALT_A)
-#define GPIO188_MC4_DAT3	PIN_CFG(188, ALT_B)
-
-#define GPIO189_GPIO		PIN_CFG(189, GPIO)
-#define GPIO189_SPI3_TXD	PIN_CFG(189, ALT_A)
-#define GPIO189_MC4_CMD		PIN_CFG(189, ALT_B)
-
-#define GPIO190_GPIO		PIN_CFG(190, GPIO)
-#define GPIO190_SPI3_CLK	PIN_CFG(190, ALT_A)
-#define GPIO190_MC4_CLK		PIN_CFG(190, ALT_B)
-
-#define GPIO191_GPIO		PIN_CFG(191, GPIO)
-#define GPIO191_MC1_DAT0	PIN_CFG(191, ALT_A)
-#define GPIO191_MC4_DAT4	PIN_CFG(191, ALT_B)
-#define GPIO191_STMAPE_DAT0	PIN_CFG(191, ALT_C)
-
-#define GPIO192_GPIO		PIN_CFG(192, GPIO)
-#define GPIO192_MC1_DAT1	PIN_CFG(192, ALT_A)
-#define GPIO192_MC4_DAT5	PIN_CFG(192, ALT_B)
-#define GPIO192_STMAPE_DAT1	PIN_CFG(192, ALT_C)
-
-#define GPIO193_GPIO		PIN_CFG(193, GPIO)
-#define GPIO193_MC1_DAT2	PIN_CFG(193, ALT_A)
-#define GPIO193_MC4_DAT6	PIN_CFG(193, ALT_B)
-#define GPIO193_STMAPE_DAT2	PIN_CFG(193, ALT_C)
-
-#define GPIO194_GPIO		PIN_CFG(194, GPIO)
-#define GPIO194_MC1_DAT3	PIN_CFG(194, ALT_A)
-#define GPIO194_MC4_DAT7	PIN_CFG(194, ALT_B)
-#define GPIO194_STMAPE_DAT3	PIN_CFG(194, ALT_C)
-
-#define GPIO195_GPIO		PIN_CFG(195, GPIO)
-#define GPIO195_MC1_CLK		PIN_CFG(195, ALT_A)
-#define GPIO195_STMAPE_CLK	PIN_CFG(195, ALT_B)
-#define GPIO195_BUSMON_CLK	PIN_CFG(195, ALT_C)
-
-#define GPIO196_GPIO		PIN_CFG(196, GPIO)
-#define GPIO196_MC1_CMD		PIN_CFG(196, ALT_A)
-#define GPIO196_U0_RXD		PIN_CFG(196, ALT_B)
-#define GPIO196_BUSMON_D38	PIN_CFG(196, ALT_C)
-
-#define GPIO197_GPIO		PIN_CFG(197, GPIO)
-#define GPIO197_MC1_CMDDIR	PIN_CFG(197, ALT_A)
-#define GPIO197_BUSMON_D39	PIN_CFG(197, ALT_B)
-
-#define GPIO198_GPIO		PIN_CFG(198, GPIO)
-#define GPIO198_MC1_FBCLK	PIN_CFG(198, ALT_A)
-
-#define GPIO199_GPIO		PIN_CFG(199, GPIO)
-#define GPIO199_MC1_DAT0DIR	PIN_CFG(199, ALT_A)
-#define GPIO199_BUSMON_D40	PIN_CFG(199, ALT_B)
-
-#define GPIO200_GPIO		PIN_CFG(200, GPIO)
-#define GPIO200_U1_TXD		PIN_CFG(200, ALT_A)
-#define GPIO200_ACCU0_RTSn	PIN_CFG(200, ALT_B)
-
-#define GPIO201_GPIO		PIN_CFG(201, GPIO)
-#define GPIO201_U1_RXD		PIN_CFG(201, ALT_A)
-#define GPIO201_ACCU0_CTSn	PIN_CFG(201, ALT_B)
-
-#define GPIO202_GPIO		PIN_CFG(202, GPIO)
-#define GPIO202_U1_CTSn		PIN_CFG(202, ALT_A)
-#define GPIO202_ACCU0_RXD	PIN_CFG(202, ALT_B)
-
-#define GPIO203_GPIO		PIN_CFG(203, GPIO)
-#define GPIO203_U1_RTSn		PIN_CFG(203, ALT_A)
-#define GPIO203_ACCU0_TXD	PIN_CFG(203, ALT_B)
-
-#define GPIO204_GPIO		PIN_CFG(204, GPIO)
-#define GPIO204_SPI0_CS2n	PIN_CFG(204, ALT_A)
-#define GPIO204_ACCGPIO_000	PIN_CFG(204, ALT_B)
-#define GPIO204_LCD_VSI1	PIN_CFG(204, ALT_C)
-
-#define GPIO205_GPIO		PIN_CFG(205, GPIO)
-#define GPIO205_SPI0_CS1n	PIN_CFG(205, ALT_A)
-#define GPIO205_ACCGPIO_001	PIN_CFG(205, ALT_B)
-#define GPIO205_LCD_D3		PIN_CFG(205, ALT_C)
-
-#define GPIO206_GPIO		PIN_CFG(206, GPIO)
-#define GPIO206_SPI0_CS0n	PIN_CFG(206, ALT_A)
-#define GPIO206_ACCGPIO_002	PIN_CFG(206, ALT_B)
-#define GPIO206_LCD_D2		PIN_CFG(206, ALT_C)
-
-#define GPIO207_GPIO		PIN_CFG(207, GPIO)
-#define GPIO207_SPI0_RXD	PIN_CFG(207, ALT_A)
-#define GPIO207_ACCGPIO_003	PIN_CFG(207, ALT_B)
-#define GPIO207_LCD_D1		PIN_CFG(207, ALT_C)
-
-#define GPIO208_GPIO		PIN_CFG(208, GPIO)
-#define GPIO208_SPI0_TXD	PIN_CFG(208, ALT_A)
-#define GPIO208_ACCGPIO_004	PIN_CFG(208, ALT_B)
-#define GPIO208_LCD_D0		PIN_CFG(208, ALT_C)
-
-#define GPIO209_GPIO		PIN_CFG(209, GPIO)
-#define GPIO209_SPI0_CLK	PIN_CFG(209, ALT_A)
-#define GPIO209_ACCGPIO_005	PIN_CFG(209, ALT_B)
-#define GPIO209_LCD_CLK		PIN_CFG(209, ALT_C)
-
-#define GPIO210_GPIO		PIN_CFG(210, GPIO)
-#define GPIO210_LCD_VSO		PIN_CFG(210, ALT_A)
-#define GPIO210_PRCMU_PWRCTRL1	PIN_CFG(210, ALT_B)
-
-#define GPIO211_GPIO		PIN_CFG(211, GPIO)
-#define GPIO211_LCD_VSI0	PIN_CFG(211, ALT_A)
-#define GPIO211_PRCMU_PWRCTRL2	PIN_CFG(211, ALT_B)
-
-#define GPIO212_GPIO		PIN_CFG(212, GPIO)
-#define GPIO212_SPI2_CS2n	PIN_CFG(212, ALT_A)
-#define GPIO212_LCD_HSO		PIN_CFG(212, ALT_B)
-
-#define GPIO213_GPIO		PIN_CFG(213, GPIO)
-#define GPIO213_SPI2_CS1n	PIN_CFG(213, ALT_A)
-#define GPIO213_LCD_DE		PIN_CFG(213, ALT_B)
-#define GPIO213_BUSMON_D16	PIN_CFG(213, ALT_C)
-
-#define GPIO214_GPIO		PIN_CFG(214, GPIO)
-#define GPIO214_SPI2_CS0n	PIN_CFG(214, ALT_A)
-#define GPIO214_LCD_D7		PIN_CFG(214, ALT_B)
-#define GPIO214_BUSMON_D17	PIN_CFG(214, ALT_C)
-
-#define GPIO215_GPIO		PIN_CFG(215, GPIO)
-#define GPIO215_SPI2_RXD	PIN_CFG(215, ALT_A)
-#define GPIO215_LCD_D6		PIN_CFG(215, ALT_B)
-#define GPIO215_BUSMON_D18	PIN_CFG(215, ALT_C)
-
-#define GPIO216_GPIO		PIN_CFG(216, GPIO)
-#define GPIO216_SPI2_CLK	PIN_CFG(216, ALT_A)
-#define GPIO216_LCD_D5		PIN_CFG(216, ALT_B)
-
-#define GPIO217_GPIO		PIN_CFG(217, GPIO)
-#define GPIO217_SPI2_TXD	PIN_CFG(217, ALT_A)
-#define GPIO217_LCD_D4		PIN_CFG(217, ALT_B)
-#define GPIO217_BUSMON_D19	PIN_CFG(217, ALT_C)
-
-#define GPIO218_GPIO		PIN_CFG(218, GPIO)
-#define GPIO218_I2C2_SCL	PIN_CFG(218, ALT_A)
-#define GPIO218_LCD_VSO		PIN_CFG(218, ALT_B)
-
-#define GPIO219_GPIO		PIN_CFG(219, GPIO)
-#define GPIO219_I2C2_SDA	PIN_CFG(219, ALT_A)
-#define GPIO219_LCD_D3		PIN_CFG(219, ALT_B)
-
-#define GPIO220_GPIO		PIN_CFG(220, GPIO)
-#define GPIO220_MSP2_TCK	PIN_CFG(220, ALT_A)
-#define GPIO220_LCD_D2		PIN_CFG(220, ALT_B)
-
-#define GPIO221_GPIO		PIN_CFG(221, GPIO)
-#define GPIO221_MSP2_TFS	PIN_CFG(221, ALT_A)
-#define GPIO221_LCD_D1		PIN_CFG(221, ALT_B)
-
-#define GPIO222_GPIO		PIN_CFG(222, GPIO)
-#define GPIO222_MSP2_TXD	PIN_CFG(222, ALT_A)
-#define GPIO222_LCD_D0		PIN_CFG(222, ALT_B)
-
-#define GPIO223_GPIO		PIN_CFG(223, GPIO)
-#define GPIO223_MSP2_RXD	PIN_CFG(223, ALT_A)
-#define GPIO223_LCD_CLK		PIN_CFG(223, ALT_B)
-
-#define GPIO224_GPIO		PIN_CFG(224, GPIO)
-#define GPIO224_PRCMU_PWRCTRL0	PIN_CFG(224, ALT_A)
-#define GPIO224_LCD_VSI1	PIN_CFG(224, ALT_B)
-
-#define GPIO225_GPIO		PIN_CFG(225, GPIO)
-#define GPIO225_PRCMU_PWRCTRL1	PIN_CFG(225, ALT_A)
-#define GPIO225_IRDA_RXD	PIN_CFG(225, ALT_B)
-
-#define GPIO226_GPIO		PIN_CFG(226, GPIO)
-#define GPIO226_PRCMU_PWRCTRL2	PIN_CFG(226, ALT_A)
-#define GPIO226_IRRC_DAT	PIN_CFG(226, ALT_B)
-
-#define GPIO227_GPIO		PIN_CFG(227, GPIO)
-#define GPIO227_IRRC_DAT	PIN_CFG(227, ALT_A)
-#define GPIO227_IRDA_TXD	PIN_CFG(227, ALT_B)
-
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index eff5842f6232..e8cd51aa61e4 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -48,9 +48,7 @@ static void write_pen_release(int val)
 
 static void __iomem *scu_base_addr(void)
 {
-	if (cpu_is_u5500())
-		return __io_address(U5500_SCU_BASE);
-	else if (cpu_is_u8500())
+	if (cpu_is_u8500())
 		return __io_address(U8500_SCU_BASE);
 	else
 		ux500_unknown_soc();
@@ -120,9 +118,7 @@ static void __init wakeup_secondary(void)
 {
 	void __iomem *backupram;
 
-	if (cpu_is_u5500())
-		backupram = __io_address(U5500_BACKUPRAM0_BASE);
-	else if (cpu_is_u8500())
+	if (cpu_is_u8500())
 		backupram = __io_address(U8500_BACKUPRAM0_BASE);
 	else
 		ux500_unknown_soc();
diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h
deleted file mode 100644
index cb2110c32858..000000000000
--- a/arch/arm/mach-ux500/ste-dma40-db5500.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- *
- * DB5500-SoC-specific configuration for DMA40
- */
-
-#ifndef STE_DMA40_DB5500_H
-#define STE_DMA40_DB5500_H
-
-#define DB5500_DMA_NR_DEV 64
-
-enum dma_src_dev_type {
-	DB5500_DMA_DEV0_SPI0_RX = 0,
-	DB5500_DMA_DEV1_SPI1_RX = 1,
-	DB5500_DMA_DEV2_SPI2_RX = 2,
-	DB5500_DMA_DEV3_SPI3_RX = 3,
-	DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4,
-	DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5,
-	DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6,
-	DB5500_DMA_DEV7_IRDA_RFS = 7,
-	DB5500_DMA_DEV8_IRDA_FIFO_RX = 8,
-	DB5500_DMA_DEV9_MSP0_RX = 9,
-	DB5500_DMA_DEV10_MSP1_RX = 10,
-	DB5500_DMA_DEV11_MSP2_RX = 11,
-	DB5500_DMA_DEV12_UART0_RX = 12,
-	DB5500_DMA_DEV13_UART1_RX = 13,
-	DB5500_DMA_DEV14_UART2_RX = 14,
-	DB5500_DMA_DEV15_UART3_RX = 15,
-	DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16,
-	DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17,
-	DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18,
-	DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19,
-	DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20,
-	DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21,
-	DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22,
-	DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23,
-	DB5500_DMA_DEV24_SDMMC0_RX = 24,
-	DB5500_DMA_DEV25_SDMMC1_RX = 25,
-	DB5500_DMA_DEV26_SDMMC2_RX = 26,
-	DB5500_DMA_DEV27_SDMMC3_RX = 27,
-	DB5500_DMA_DEV28_SDMMC4_RX = 28,
-	/* 29 - 32 not used */
-	DB5500_DMA_DEV33_SDMMC0_RX = 33,
-	DB5500_DMA_DEV34_SDMMC1_RX = 34,
-	DB5500_DMA_DEV35_SDMMC2_RX = 35,
-	DB5500_DMA_DEV36_SDMMC3_RX = 36,
-	DB5500_DMA_DEV37_SDMMC4_RX = 37,
-	DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38,
-	DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39,
-	DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40,
-	DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41,
-	DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42,
-	DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43,
-	DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44,
-	DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45,
-	/* 46 not used */
-	DB5500_DMA_DEV47_MCDE_RX = 47,
-	DB5500_DMA_DEV48_CRYPTO1_RX = 48,
-	/* 49, 50 not used */
-	DB5500_DMA_DEV49_I2C1_RX = 51,
-	DB5500_DMA_DEV50_I2C3_RX = 52,
-	DB5500_DMA_DEV51_I2C2_RX = 53,
-	/* 54 - 60 not used */
-	DB5500_DMA_DEV61_CRYPTO0_RX = 61,
-	/* 62, 63 not used */
-};
-
-enum dma_dest_dev_type {
-	DB5500_DMA_DEV0_SPI0_TX = 0,
-	DB5500_DMA_DEV1_SPI1_TX = 1,
-	DB5500_DMA_DEV2_SPI2_TX = 2,
-	DB5500_DMA_DEV3_SPI3_TX = 3,
-	DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4,
-	DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5,
-	DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6,
-	DB5500_DMA_DEV7_IRRC_TX = 7,
-	DB5500_DMA_DEV8_IRDA_FIFO_TX = 8,
-	DB5500_DMA_DEV9_MSP0_TX = 9,
-	DB5500_DMA_DEV10_MSP1_TX = 10,
-	DB5500_DMA_DEV11_MSP2_TX = 11,
-	DB5500_DMA_DEV12_UART0_TX = 12,
-	DB5500_DMA_DEV13_UART1_TX = 13,
-	DB5500_DMA_DEV14_UART2_TX = 14,
-	DB5500_DMA_DEV15_UART3_TX = 15,
-	DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16,
-	DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17,
-	DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18,
-	DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19,
-	DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20,
-	DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21,
-	DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22,
-	DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23,
-	DB5500_DMA_DEV24_SDMMC0_TX = 24,
-	DB5500_DMA_DEV25_SDMMC1_TX = 25,
-	DB5500_DMA_DEV26_SDMMC2_TX = 26,
-	DB5500_DMA_DEV27_SDMMC3_TX = 27,
-	DB5500_DMA_DEV28_SDMMC4_TX = 28,
-	/* 29 - 31 not used */
-	DB5500_DMA_DEV32_FSMC_TX = 32,
-	DB5500_DMA_DEV33_SDMMC0_TX = 33,
-	DB5500_DMA_DEV34_SDMMC1_TX = 34,
-	DB5500_DMA_DEV35_SDMMC2_TX = 35,
-	DB5500_DMA_DEV36_SDMMC3_TX = 36,
-	DB5500_DMA_DEV37_SDMMC4_TX = 37,
-	DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38,
-	DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39,
-	DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40,
-	DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41,
-	DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42,
-	DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43,
-	DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44,
-	DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45,
-	/* 46 not used */
-	DB5500_DMA_DEV47_STM_TX = 47,
-	DB5500_DMA_DEV48_CRYPTO1_TX = 48,
-	DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49,
-	DB5500_DMA_DEV50_HASH1_TX = 50,
-	DB5500_DMA_DEV51_I2C1_TX = 51,
-	DB5500_DMA_DEV52_I2C3_TX = 52,
-	DB5500_DMA_DEV53_I2C2_TX = 53,
-	/* 54, 55 not used */
-	DB5500_DMA_MEMCPY_TX_1 = 56,
-	DB5500_DMA_MEMCPY_TX_2 = 57,
-	DB5500_DMA_MEMCPY_TX_3 = 58,
-	DB5500_DMA_MEMCPY_TX_4 = 59,
-	DB5500_DMA_MEMCPY_TX_5 = 60,
-	DB5500_DMA_DEV61_CRYPTO0_TX = 61,
-	DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62,
-	DB5500_DMA_DEV63_HASH0_TX = 63,
-};
-
-#endif
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index d37df98b5c32..52e55337aa9b 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -18,8 +18,6 @@
 #include <mach/irqs.h>
 
 #ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer,
-			      U5500_TWD_BASE, IRQ_LOCALTIMER);
 static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
 			      U8500_TWD_BASE, IRQ_LOCALTIMER);
 
@@ -28,8 +26,8 @@ static void __init ux500_twd_init(void)
 	struct twd_local_timer *twd_local_timer;
 	int err;
 
-	twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
-					   &u8500_twd_local_timer;
+	/* Use this to switch local timer base if changed in new ASICs */
+	twd_local_timer = &u8500_twd_local_timer;
 
 	if (of_have_populated_dt())
 		twd_local_timer_of_register();
@@ -48,10 +46,7 @@ static void __init ux500_timer_init(void)
 	void __iomem *mtu_timer_base;
 	void __iomem *prcmu_timer_base;
 
-	if (cpu_is_u5500()) {
-		mtu_timer_base = __io_address(U5500_MTU0_BASE);
-		prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
-	} else if (cpu_is_u8500()) {
+	if (cpu_is_u8500()) {
 		mtu_timer_base = __io_address(U8500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
 	} else {
@@ -70,7 +65,7 @@ static void __init ux500_timer_init(void)
 	 * depending on delay which is not yet calibrated. RTC-RTT is in the
 	 * always-on powerdomain and is used as clockevent instead of twd when
 	 * sleeping.
-	 * The PRCMU timer 4(3 for DB5500) register a clocksource and
+	 * The PRCMU timer 4 register a clocksource and
 	 * sched_clock with higher rating then MTU since is always-on.
 	 *
 	 */