diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 19:44:18 +0200 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 19:44:18 +0200 |
| commit | e533cda12d8f0e7936354bafdc85c81741f805d2 (patch) | |
| tree | 3a2f5cd0e3e97e1051123f25f31cb021f90db29f /arch | |
| parent | Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/s... (diff) | |
| parent | Merge tag 'visconti-initial-for-5.10-tag2' of git://git.kernel.org/pub/scm/li... (diff) | |
| download | linux-e533cda12d8f0e7936354bafdc85c81741f805d2.tar.xz linux-e533cda12d8f0e7936354bafdc85c81741f805d2.zip | |
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
"As usual, most of the changes are to devicetrees.
Besides smaller fixes, some refactorings and cleanups, some of the new
platforms and chips (or significant features) supported are below:
Broadcom boards:
- Cisco Meraki MR32 (BCM53016-based)
- BCM2711 (RPi4) display pipeline support
Actions Semi boards:
- Caninos Loucos Labrador SBC (S500-based)
- RoseapplePi SBC (S500-based)
Allwinner SoCs/boards:
- A100 SoC with Perf1 board
- Mali, DMA, Cetrus and IR support for R40 SoC
Amlogic boards:
- Libretch S905x CC V2 board
- Hardkernel ODROID-N2+ board
Aspeed boards/platforms:
- Wistron Mowgli (AST2500-based, Power9 OpenPower server)
- Facebook Wedge400 (AST2500-based, ToR switch)
Hisilicon SoC:
- SD5203 SoC
Nvidia boards:
- Tegra234 VDK, for pre-silicon Orin SoC
NXP i.MX boards:
- Librem 5 phone
- i.MX8MM DDR4 EVK
- Variscite VAR-SOM-MX8MN SoM
- Symphony board
- Tolino Shine 2 HD
- TQMa6 SoM
- Y Soft IOTA Orion
Rockchip boards:
- NanoPi R2S board
- A95X-Z2 board
- more Rock-Pi4 variants
STM32 boards:
- Odyssey SOM board (STM32MP157CAC-based)
- DH DRC02 board
Toshiba SoCs/boards:
- Visconti SoC and TPMV7708 board"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
ARM: dts: nspire: Fix SP804 users
arm64: dts: lg: Fix SP804 users
arm64: dts: lg: Fix SP805 clocks
ARM: mstar: Fix up the fallout from moving the dts/dtsi files
ARM: mstar: Add mstar prefix to all of the dtsi/dts files
ARM: mstar: Add interrupt to pm_uart
ARM: mstar: Add interrupt controller to base dtsi
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
arm64: dts: ti: k3-j7200-main: Add USB controller
arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
ARM: dts: hisilicon: add SD5203 dts
ARM: dts: hisilicon: fix the system controller compatible nodes
arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
arm64: dts: zynqmp: Remove undocumented u-boot properties
arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
...
Diffstat (limited to 'arch')
625 files changed, 27407 insertions, 6335 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4572db3fa5ae..ce66ffd5a1bb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -43,6 +43,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-smartkiz.dtb \ at91-wb45n.dtb \ at91sam9g15ek.dtb \ + at91sam9g25-gardena-smart-gateway.dtb \ at91sam9g25ek.dtb \ at91sam9g35ek.dtb \ at91sam9x25ek.dtb \ @@ -127,6 +128,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ bcm47094-phicomm-k3.dtb \ + bcm53016-meraki-mr32.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012er.dtb \ @@ -357,6 +359,8 @@ dtb-$(CONFIG_ARCH_MPS2) += \ mps2-an399.dtb dtb-$(CONFIG_ARCH_MOXART) += \ moxart-uc7112lx.dtb +dtb-$(CONFIG_ARCH_SD5203) += \ + sd5203.dtb dtb-$(CONFIG_SOC_IMX1) += \ imx1-ads.dtb \ imx1-apf9328.dtb @@ -482,6 +486,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-wandboard-revd1.dtb \ imx6dl-yapp4-draco.dtb \ imx6dl-yapp4-hydra.dtb \ + imx6dl-yapp4-orion.dtb \ imx6dl-yapp4-ursa.dtb \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ @@ -531,6 +536,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-icore-ofcap12.dtb \ imx6q-icore-rqs.dtb \ imx6q-kp-tpc.dtb \ + imx6q-logicpd.dtb \ imx6q-marsboard.dtb \ imx6q-mccmon6.dtb \ imx6q-nitrogen6x.dtb \ @@ -585,6 +591,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ + imx6sl-tolino-shine2hd.dtb \ imx6sl-tolino-shine3.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ @@ -868,7 +875,12 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ dtb-$(CONFIG_ARCH_ACTIONS) += \ owl-s500-cubieboard6.dtb \ owl-s500-guitar-bb-rev-b.dtb \ + owl-s500-labrador-base-m.dtb \ + owl-s500-roseapplepi.dtb \ owl-s500-sparky.dtb +dtb-$(CONFIG_ARCH_PICOXCELL) += \ + picoxcell-pc7302-pc3x2.dtb \ + picoxcell-pc7302-pc3x3.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb dtb-$(CONFIG_ARCH_PXA) += \ @@ -1047,6 +1059,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ + stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ @@ -1056,7 +1069,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb \ - stm32mp157c-lxa-mc1.dtb + stm32mp157c-lxa-mc1.dtb \ + stm32mp157c-odyssey.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -1194,6 +1208,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-s3-lichee-zero-plus.dtb \ + sun8i-s3-pinecube.dtb \ sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ @@ -1356,9 +1371,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb dtb-$(CONFIG_ARCH_MSTARV7) += \ - infinity-msc313-breadbee_crust.dtb \ - infinity3-msc313e-breadbee.dtb \ - mercury5-ssc8336n-midrived08.dtb + mstar-infinity-msc313-breadbee_crust.dtb \ + mstar-infinity3-msc313e-breadbee.dtb \ + mstar-mercury5-ssc8336n-midrived08.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ @@ -1371,6 +1386,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ aspeed-bmc-facebook-wedge100.dtb \ + aspeed-bmc-facebook-wedge400.dtb \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-ibm-rainier.dtb \ @@ -1381,6 +1397,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ + aspeed-bmc-opp-mowgli.dtb \ aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index d3036ea823d1..3b0675a1c460 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -91,7 +91,7 @@ }; /* Interrupt Controller */ - gic: gic@fb001000 { + gic: interrupt-controller@fb001000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index cd55f11260ea..0f078465297a 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -160,11 +160,15 @@ serial_config1: serial_config1@20 { compatible = "nxp,pca9539"; reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; }; serial_config2: serial_config2@21 { compatible = "nxp,pca9539"; reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; }; tps: tps@2d { diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi new file mode 100644 index 000000000000..98d8ed4ad967 --- /dev/null +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/ + * + * Author: Johnson Chen <johnsonch.chen@moxa.com> + */ + +#include "am33xx.dtsi" + +/ { + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + }; + + /* Power supply provides a fixed 3.3V @3A */ + vmmcsd_fixed: vmmcsd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buttons: push_button { + compatible = "gpio-keys"; + }; + +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_pins>; + + minipcie_pins: pinmux_minipcie { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/ + >; + }; + + push_button_pins: pinmux_push_button { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) + >; + }; + + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) + + /* Slave 2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */ + + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) + >; + }; + + mmc0_pins_default: pinmux_mmc0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */ + >; + }; + + mmc2_pins_default: pinmux_mmc2_pins { + pinctrl-single,pins = < + /* eMMC */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */ + >; + }; + + spi0_pins: pinmux_spi0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) + >; + }; + +}; + +&uart0 { + /* Console */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&uart1 { + /* UART 1 setting */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart5 { + /* UART 2 setting */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + compatible = "ti,tps65910"; + reg = <0x2d>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + pagesize = <16>; + reg = <0x50>; + }; + + rtc_wdt: rtc_wdt@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <400000>; + gpio_xten: gpio_xten@27 { + compatible = "nxp,pca9535"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x27>; + }; +}; + +&usb0 { + dr_mode = "host"; +}; + +&usb1 { + dr_mode = "host"; +}; + + +#include "tps65910.dtsi" +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "vmmc_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +/* Power */ +&vbat { + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +&mac { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_default>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_default>; + status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; + + ethphy1: ethernet-phy@5 { + reg = <5>; + }; +}; + +&cpsw_emac0 { + status = "okay"; + phy-handle = <ðphy0>; + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + status = "okay"; + phy-handle = <ðphy1>; + phy-mode = "rmii"; + dual_emac_res_vlan = <2>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; + +&mmc1 { + pinctrl-names = "default"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-0 = <&mmc0_pins_default>; + cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + pinctrl-0 = <&mmc2_pins_default>; + ti,non-removable; + status = "okay"; +}; + +&buttons { + pinctrl-names = "default"; + pinctrl-0 = <&push_button_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "push_button"; + linux,code = <0x100>; + gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + }; +}; + +/* SPI Busses */ +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + m25p80@0 { + compatible = "mx25l6405d"; + spi-max-frequency = <40000000>; + + reg = <0>; + spi-cpol; + spi-cpha; + #address-cells = <1>; + #size-cells = <1>; + + /* reg : The partition's offset and size within the mtd bank. */ + partitions@0 { + label = "MLO"; + reg = <0x0 0x80000>; + }; + + partitions@1 { + label = "U-Boot"; + reg = <0x80000 0x100000>; + }; + + partitions@2 { + label = "U-Boot Env"; + reg = <0x180000 0x20000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts index f03e72cada41..0c7949d21bd9 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -4,39 +4,19 @@ * * Author: SZ Lin (林上智) <sz.lin@moxa.com> */ - /dts-v1/; -#include "am33xx.dtsi" +#include "am335x-moxa-uc-8100-common.dtsi" / { model = "Moxa UC-8100-ME-T"; compatible = "moxa,uc-8100-me-t", "ti,am33xx"; - cpus { - cpu@0 { - cpu0-supply = <&vdd1_reg>; - }; - }; - memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; - vbat: vbat-regulator { - compatible = "regulator-fixed"; - }; - - /* Power supply provides a fixed 3.3V @3A */ - vmmcsd_fixed: vmmcsd-regulator { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - leds { compatible = "gpio-leds"; led1 { @@ -88,237 +68,17 @@ default-state = "off"; }; }; - - buttons: push_button { - compatible = "gpio-keys"; - }; - -}; - -&am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&minipcie_pins>; - - minipcie_pins: pinmux_minipcie { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */ - AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ - AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/ - >; - }; - - push_button_pins: pinmux_push_button { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ - >; - }; - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) - >; - }; - - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */ - AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */ - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) - >; - }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */ - AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */ - AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */ - AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) - - /* Slave 2 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */ - AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */ - AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */ - - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) - >; - }; - - mmc0_pins_default: pinmux_mmc0_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */ - AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */ - >; - }; - - mmc2_pins_default: pinmux_mmc2_pins { - pinctrl-single,pins = < - /* eMMC */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */ - >; - }; - - spi0_pins: pinmux_spi0 { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) - >; - }; - -}; - -&uart0 { - /* Console */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; -}; - -&uart1 { - /* UART 1 setting */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&uart5 { - /* UART 2 setting */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - status = "okay"; - clock-frequency = <400000>; - tpm: tpm@20 { compatible = "infineon,slb9645tt"; reg = <0x20>; }; - - tps: tps@2d { - compatible = "ti,tps65910"; - reg = <0x2d>; - }; - - eeprom: eeprom@50 { - compatible = "atmel,24c16"; - pagesize = <16>; - reg = <0x50>; - }; - - rtc_wdt: rtc_wdt@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - }; }; -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - status = "okay"; - clock-frequency = <400000>; - gpio_xten: gpio_xten@27 { - compatible = "nxp,pca9535"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x27>; - }; -}; - -&usb0 { - dr_mode = "host"; -}; - -&usb1 { - dr_mode = "host"; -}; - -#include "tps65910.dtsi" - &tps { - vcc1-supply = <&vbat>; - vcc2-supply = <&vbat>; - vcc3-supply = <&vbat>; - vcc4-supply = <&vbat>; - vcc5-supply = <&vbat>; - vcc6-supply = <&vbat>; - vcc7-supply = <&vbat>; - vccio-supply = <&vbat>; - regulators { - vrtc_reg: regulator@0 { - regulator-always-on; - }; - - vio_reg: regulator@1 { - regulator-always-on; - }; - vdd1_reg: regulator@2 { /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; @@ -336,168 +96,6 @@ regulator-boot-on; regulator-always-on; }; - - vdd3_reg: regulator@4 { - regulator-always-on; - }; - - vdig1_reg: regulator@5 { - regulator-always-on; - }; - - vdig2_reg: regulator@6 { - regulator-always-on; - }; - - vpll_reg: regulator@7 { - regulator-always-on; - }; - - vdac_reg: regulator@8 { - regulator-always-on; - }; - - vaux1_reg: regulator@9 { - regulator-always-on; - }; - - vaux2_reg: regulator@10 { - regulator-always-on; - }; - - vaux33_reg: regulator@11 { - regulator-always-on; - }; - - vmmc_reg: regulator@12 { - compatible = "regulator-fixed"; - regulator-name = "vmmc_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; -}; - -/* Power */ -&vbat { - regulator-name = "vbat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; -}; - -&mac { - pinctrl-names = "default"; - pinctrl-0 = <&cpsw_default>; - dual_emac = <1>; - status = "okay"; -}; - -&davinci_mdio { - pinctrl-names = "default"; - pinctrl-0 = <&davinci_mdio_default>; - status = "okay"; - - ethphy0: ethernet-phy@4 { - reg = <4>; - }; - - ethphy1: ethernet-phy@5 { - reg = <5>; - }; -}; - -&cpsw_emac0 { - status = "okay"; - phy-handle = <ðphy0>; - phy-mode = "rmii"; - dual_emac_res_vlan = <1>; -}; - -&cpsw_emac1 { - status = "okay"; - phy-handle = <ðphy1>; - phy-mode = "rmii"; - dual_emac_res_vlan = <2>; -}; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; - -&gpio0 { - ti,no-reset-on-init; -}; - -&mmc1 { - pinctrl-names = "default"; - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <4>; - pinctrl-0 = <&mmc0_pins_default>; - cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&mmc3 { - dmas = <&edma_xbar 12 0 1 - &edma_xbar 13 0 2>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <8>; - pinctrl-0 = <&mmc2_pins_default>; - non-removable; - status = "okay"; -}; - -&buttons { - pinctrl-names = "default"; - pinctrl-0 = <&push_button_pins>; - #address-cells = <1>; - #size-cells = <0>; - - button@0 { - label = "push_button"; - linux,code = <0x100>; - gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; }; }; -/* SPI Busses */ -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - - m25p80@0 { - compatible = "mx25l6405d"; - spi-max-frequency = <40000000>; - - reg = <0>; - spi-cpol; - spi-cpha; - #address-cells = <1>; - #size-cells = <1>; - - /* reg : The partition's offset and size within the mtd bank. */ - partitions@0 { - label = "MLO"; - reg = <0x0 0x80000>; - }; - - partitions@1 { - label = "U-Boot"; - reg = <0x80000 0x100000>; - }; - - partitions@2 { - label = "U-Boot Env"; - reg = <0x180000 0x20000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts index a3f6bc4072d9..81e4453687ba 100644 --- a/arch/arm/boot/dts/am335x-sbc-t335.dts +++ b/arch/arm/boot/dts/am335x-sbc-t335.dts @@ -155,13 +155,13 @@ gpio-controller; #gpio-cells = <2>; reg = <0x26>; - dvi_ena { + dvi-ena-hog { gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; output-high; line-name = "dvi-enable"; }; - lcd_ena { + lcd-ena-hog { gpio-hog; gpios = <11 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0fab080d61ef..4c2298024137 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -172,7 +172,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi index 250c40da2535..7d8f32bf70db 100644 --- a/arch/arm/boot/dts/am3517-evm-ui.dtsi +++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi @@ -183,14 +183,14 @@ }; &mcbsp1 { - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_pins>; }; &mcbsp2 { - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 04f20e7680b1..0d2fac98ce7d 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -176,7 +176,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 1bb57019d082..9423e9feaa10 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -195,7 +195,7 @@ "FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS", "FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C", "FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL"; - reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; }; u42: pca9575@21 { @@ -208,7 +208,7 @@ "QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL", "SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1", "QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR"; - reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; }; u48: pca9575@22 { @@ -227,7 +227,7 @@ "GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8", "GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5", "GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1"; - reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; }; u59: pca9575@23 { @@ -240,7 +240,7 @@ "GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault", "BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3", "BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17"; - reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; }; tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 8d47913e2129..878406b120be 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -35,8 +35,8 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - ethernet0 = &cpsw_emac0; - ethernet1 = &cpsw_emac1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; spi0 = &qspi; }; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index a6b4fca8626a..a83f46ed0c9a 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -325,17 +325,15 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default"; pinctrl-0 = <&cpsw_default>; - dual_emac = <1>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; @@ -346,16 +344,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &dwc3_1 { diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index b28e5c8cd02a..6e4d05d649e9 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -906,28 +906,31 @@ status = "okay"; }; -&mac { - slaves = <1>; +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-rxid"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &elm { @@ -1024,7 +1027,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_pins>; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 8b986c45f09d..2dc525512266 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -483,28 +483,31 @@ }; }; -&mac { - slaves = <1>; +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-rxid"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &rtc { diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 8a67bb29e3b7..c220dc3c4e0f 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -520,54 +520,57 @@ #size-cells = <1>; ranges = <0x0 0x100000 0x8000>; - mac: ethernet@0 { - compatible = "ti,am4372-cpsw","ti,cpsw"; - reg = <0x0 0x800 - 0x1200 0x100>; + mac_sw: switch@0 { + compatible = "ti,am4372-cpsw","ti,cpsw-switch"; + reg = <0x0 0x4000>; + ranges = <0 0 0x4000>; + clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>; + clock-names = "fck", "50mclk"; + assigned-clocks = <&dpll_clksel_mac_clk>; + assigned-clock-rates = <50000000>; + #address-cells = <1>; + #size-cells = <1>; + syscon = <&scm_conf>; + status = "disabled"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>, - <&dpll_clksel_mac_clk>; - clock-names = "fck", "cpts", "50mclk"; - assigned-clocks = <&dpll_clksel_mac_clk>; - assigned-clock-rates = <50000000>; - status = "disabled"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x80000000>; - cpts_clock_shift = <29>; - ranges = <0 0 0x8000>; - syscon = <&scm_conf>; + interrupt-names = "rx_thresh", "rx", "tx", "misc"; - davinci_mdio: mdio@1000 { - compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x1000 0x100>; - clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>; - clock-names = "fck"; + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - bus_freq = <1000000>; - status = "disabled"; + + cpsw_port1: port@1 { + reg = <1>; + label = "port1"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; + }; + + cpsw_port2: port@2 { + reg = <2>; + label = "port2"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; + }; }; - cpsw_emac0: slave@200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 1 0>; + davinci_mdio_sw: mdio@1000 { + compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x1000 0x100>; }; - cpsw_emac1: slave@300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 2 0>; + cpts { + clocks = <&cpsw_cpts_rft_clk>; + clock-names = "cpts"; }; }; }; diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts index 94cf07ea27f7..8ea3780f939d 100644 --- a/arch/arm/boot/dts/am437x-sbc-t43.dts +++ b/arch/arm/boot/dts/am437x-sbc-t43.dts @@ -136,7 +136,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_pinctrl_default>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 5fffdce853b1..496ed34f7755 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -792,19 +792,17 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - dual_emac = <1>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@4 { reg = <4>; @@ -815,16 +813,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &elm { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 7f3faa36a5e4..f517d1e843cf 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -550,29 +550,32 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; - slaves = <1>; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@16 { reg = <16>; }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rmii"; phys = <&phy_gmii_sel 1 1>; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &i2c0 { @@ -952,7 +955,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_pins>; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 391a92e24472..e81078c2d00d 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -208,30 +208,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; - -&mac_sw { - pinctrl-names = "default", "sleep"; - status = "okay"; -}; - -&cpsw_port1 { - phy-handle = <ðphy0_sw>; - phy-mode = "rgmii-rxid"; - ti,dual-emac-pvid = <1>; -}; - -&cpsw_port2 { - phy-handle = <ðphy1_sw>; - phy-mode = "rgmii-rxid"; - ti,dual-emac-pvid = <2>; -}; - -&davinci_mdio_sw { - ethphy0_sw: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1_sw: ethernet-phy@1 { - reg = <1>; - }; -}; diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts index e9c7f44126e7..149cfafb90bf 100644 --- a/arch/arm/boot/dts/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts @@ -488,25 +488,29 @@ status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; reset-delay-us = <2>; - phy0: ethernet-phy@1 { + phy0: ethernet-phy@4 { reg = <4>; eee-broken-100tx; eee-broken-1000t; }; }; -&mac { - slaves = <1>; +&mac_sw { status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&phy0>; phy-mode = "rgmii-rxid"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &ocp { diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 1a3af4b54308..6504265f3f7e 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -27,8 +27,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; - -&mac { - status = "okay"; - dual_emac; -}; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index c9275d0c62cf..37758761cd88 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -36,11 +36,6 @@ pinctrl-2 = <&mmc2_pins_default>; }; -&mac { - status = "okay"; - dual_emac; -}; - &m_can0 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index b3a0206ebd6c..6b82ecf803c5 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -451,7 +451,7 @@ <&dra7_pmx_core 0x3f8>; }; -&davinci_mdio { +&davinci_mdio_sw { phy0: ethernet-phy@1 { reg = <1>; }; @@ -461,21 +461,20 @@ }; }; -&mac { +&mac_sw { status = "okay"; - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&phy0>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&phy1>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &mmc1 { @@ -582,13 +581,13 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&ldoln_reg>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo4_reg>; port { @@ -599,7 +598,7 @@ }; &pcie1_rc { - status = "ok"; + status = "okay"; gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 34ca761aeded..0d5fe2bfb683 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -546,27 +546,26 @@ }; }; -&mac { +&mac_sw { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_pins_default>; pinctrl-1 = <&cpsw_pins_sleep>; - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <0>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_pins_default>; pinctrl-1 = <&davinci_mdio_pins_sleep>; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 1c77006cccd1..9fcb8944aa3e 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -448,19 +448,23 @@ ext-clk-src; }; -&cpsw_emac0 { +&mac_sw { + status = "okay"; +}; + +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { ethphy0: ethernet-phy@0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index ce5bf1d92eab..beef63e8a005 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -120,7 +120,7 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&ldoln_reg>; @@ -148,7 +148,7 @@ }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo4_reg>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index c36d28c295d6..7da718abbd85 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -26,7 +26,7 @@ stdout-path = &usart2; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -81,6 +81,7 @@ pinctrl-0 = <&pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index fe0207b88053..a534a8e444d9 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -390,7 +390,7 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0x10010000 0x1000>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 9748e0fe800f..0c7dabef4a5f 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -546,7 +546,7 @@ interrupt-parent = <&intc_pb11mp>; interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; @@ -556,7 +556,7 @@ interrupt-parent = <&intc_pb11mp>; interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; timer01: timer@10011000 { @@ -568,8 +568,8 @@ clocks = <&sp810_syscon 0>, <&sp810_syscon 1>, <&pclk>; - clock-names = "timerclk0", - "timerclk1", + clock-names = "timer0clk", + "timer1clk", "apb_pclk"; }; @@ -582,8 +582,8 @@ clocks = <&sp810_syscon 2>, <&sp810_syscon 3>, <&pclk>; - clock-names = "timerclk2", - "timerclk3", + clock-names = "timer0clk", + "timer1clk", "apb_pclk"; }; @@ -645,16 +645,16 @@ timer45: timer@10018000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x10018000 0x1000>; - clocks = <&timclk>, <&pclk>; - clock-names = "timer", "apb_pclk"; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; timer67: timer@10019000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x10019000 0x1000>; - clocks = <&timclk>, <&pclk>; - clock-names = "timer", "apb_pclk"; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index f61bd59ae5ba..ac95667ed781 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -381,7 +381,7 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0x1000f000 0x1000>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; @@ -389,7 +389,7 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0x10010000 0x1000>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index 7bc7df7ed428..2fb8b147f489 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -1571,3 +1571,20 @@ &sdhci1 { status = "disabled"; }; + +&fmc_flash0 { +#include "facebook-bmc-flash-layout.dtsi" +}; + +&fmc_flash1 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts index 88ce4ff9f47e..c34741dbd268 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts @@ -88,17 +88,60 @@ */ &fmc_flash0 { partitions { - data0@1c00000 { - reg = <0x1c00000 0x2400000>; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * u-boot partition: 384KB. + */ + u-boot@0 { + reg = <0x0 0x60000>; + label = "u-boot"; }; + + /* + * u-boot environment variables: 128KB. + */ + u-boot-env@60000 { + reg = <0x60000 0x20000>; + label = "env"; + }; + + /* + * FIT image: 59.5 MB. + */ + fit@80000 { + reg = <0x80000 0x3b80000>; + label = "fit"; + }; + + /* + * "data0" partition (4MB) is reserved for persistent + * data store. + */ + data0@3800000 { + reg = <0x3c00000 0x400000>; + label = "data0"; + }; + + /* + * "flash0" partition (covering the entire flash) is + * explicitly created to avoid breaking legacy applications. + */ flash0@0 { reg = <0x0 0x4000000>; + label = "flash0"; }; }; }; &fmc_flash1 { partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + flash1@0 { reg = <0x0 0x4000000>; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts index 8ac23ff6b09e..8c426ba2f8ab 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts @@ -48,7 +48,7 @@ flash@0 { status = "okay"; m25p,fast-read; - label = "fmc0"; + label = "spi0.0"; #include "facebook-bmc-flash-layout.dtsi" }; }; @@ -71,7 +71,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd4_default - &pinctrl_rxd4_default>; + &pinctrl_rxd4_default + &pinctrl_ndts4_default>; }; &uart5 { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts new file mode 100644 index 000000000000..ad1fcad3676c --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2019 Facebook Inc. +/dts-v1/; + +#include <dt-bindings/gpio/aspeed-gpio.h> +#include "ast2500-facebook-netbmc-common.dtsi" + +/ { + model = "Facebook Wedge 400 BMC"; + compatible = "facebook,wedge400-bmc", "aspeed,ast2500"; + + aliases { + /* + * PCA9548 (2-0070) provides 8 channels connecting to + * SCM (System Controller Module). + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + + /* + * PCA9548 (8-0070) provides 8 channels connecting to + * SMB (Switch Main Board). + */ + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + + /* + * PCA9548 (11-0076) provides 8 channels connecting to + * FCM (Fan Controller Module). + */ + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + + spi2 = &spi_gpio; + }; + + chosen { + stdout-path = &uart1; + bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; + }; + + ast-adc-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>; + }; + + /* + * GPIO-based SPI Master is required to access SPI TPM, because + * full-duplex SPI transactions are not supported by ASPEED SPI + * Controllers. + */ + spi_gpio: spi-gpio { + status = "okay"; + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>; + gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + tpmdev@0 { + compatible = "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +/* + * Both firmware flashes are 128MB on Wedge400 BMC. + */ +&fmc_flash0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * u-boot partition: 384KB. + */ + u-boot@0 { + reg = <0x0 0x60000>; + label = "u-boot"; + }; + + /* + * u-boot environment variables: 128KB. + */ + u-boot-env@60000 { + reg = <0x60000 0x20000>; + label = "env"; + }; + + /* + * FIT image: 123.5 MB. + */ + fit@80000 { + reg = <0x80000 0x7b80000>; + label = "fit"; + }; + + /* + * "data0" partition (4MB) is reserved for persistent + * data store. + */ + data0@3800000 { + reg = <0x7c00000 0x800000>; + label = "data0"; + }; + + /* + * "flash0" partition (covering the entire flash) is + * explicitly created to avoid breaking legacy applications. + */ + flash0@0 { + reg = <0x0 0x8000000>; + label = "flash0"; + }; + }; +}; + +&fmc_flash1 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x8000000>; + label = "flash1"; + }; + }; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +/* + * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC + * communication. + */ +&i2c0 { + status = "okay"; + multi-master; + bus-frequency = <1000000>; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux28: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux29: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux30: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux31: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + i2c-switch@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux36: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux37: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux38: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux39: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&sdhci1 { + /* + * DMA mode needs to be disabled to avoid conflicts with UHCI + * Controller in AST2500 SoC. + */ + sdhci-caps-mask = <0x0 0x580000>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts index fe2e11c2da15..5e6105874217 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts @@ -108,3 +108,20 @@ &i2c13 { status = "okay"; }; + +&fmc_flash0 { +#include "facebook-bmc-flash-layout.dtsi" +}; + +&fmc_flash1 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index b94421f6cbd5..21ae880c7530 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -4,6 +4,7 @@ #include "aspeed-g6.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> #include <dt-bindings/leds/leds-pca955x.h> / { @@ -52,9 +53,10 @@ }; vga_memory: region@bf000000 { - no-map; - reg = <0xbf000000 0x01000000>; /* 16M */ - }; + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; }; gpio-keys { @@ -178,6 +180,10 @@ status = "okay"; }; +&pinctrl_emmc_default { + bias-disable; +}; + &emmc { status = "okay"; }; @@ -698,6 +704,7 @@ }; &i2c7 { + multi-master; status = "okay"; si7021-a20@20 { @@ -831,6 +838,11 @@ }; }; + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + dps: dps310@76 { compatible = "infineon,dps310"; reg = <0x76>; @@ -1121,3 +1133,8 @@ spi-max-frequency = <100000000>; }; }; + +&xdma { + status = "okay"; + memory-region = <&vga_memory>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts new file mode 100644 index 000000000000..b648e468e9db --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts @@ -0,0 +1,662 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Mowgli BMC"; + compatible = "ibm,mowgli-bmc", "aspeed,ast2500"; + + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 6)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 2)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 0)>; + }; + + id-button { + label = "id-button"; + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 1)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; + linux,code = <10>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; + linux,code = <11>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + }; + + leds { + compatible = "gpio-leds"; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; + }; + + power-button { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; + }; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 3 GPIO_ACTIVE_LOW>; + }; + + fan4 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 4 GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-12v { + compatible = "iio-hwmon"; + io-channels = <&adc 0>; + }; + + iio-hwmon-5v { + compatible = "iio-hwmon"; + io-channels = <&adc 1>; + }; + + iio-hwmon-3v { + compatible = "iio-hwmon"; + io-channels = <&adc 2>; + }; + + iio-hwmon-vdd { + compatible = "iio-hwmon"; + io-channels = <&adc 3>; + }; + + iio-hwmon-vcs { + compatible = "iio-hwmon"; + io-channels = <&adc 5>; + }; + + iio-hwmon-vdn { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; + + iio-hwmon-vio { + compatible = "iio-hwmon"; + io-channels = <&adc 9>; + }; + + iio-hwmon-vddra { + compatible = "iio-hwmon"; + io-channels = <&adc 11>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + iio-hwmon-vddrb { + compatible = "iio-hwmon"; + io-channels = <&adc 13>; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "obmc-ubi"; + }; + }; + }; + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "okay"; + + /* CPU MFG CONN */ + +}; + +&i2c3 { + status = "okay"; + + /* APSS */ + /* CPLD */ + + /* PCA9516 (repeater) -> + * CLK Buffer 9FGS9092 + * Power Supply 0 + * Power Supply 1 + * PCA 9552 LED + */ + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + /* CP0 VDD & VCS : IR35221 */ + /* CP0 VDN & VIO : IR35221 */ + /* CP0 VDDR : IR35221 */ + + ir35221@28 { + compatible = "infineon,ir35221"; + reg = <0x28>; + }; + + ir35221@29 { + compatible = "infineon,ir35221"; + reg = <0x29>; + }; + + ir35221@2d { + compatible = "infineon,ir35221"; + reg = <0x2d>; + }; + +}; + +&i2c5 { + status = "disabled"; +}; + +&i2c6 { + status = "disabled"; +}; + +&i2c7 { + status = "disabled"; +}; + +&i2c8 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c9 { + status = "okay"; + + /* PCIe G3 x16 slot */ +}; + +&i2c10 { + status = "disabled"; +}; + +&i2c11 { + status = "okay"; + + /* CPLD */ + /* TPM */ + /* RTC RX8900CE */ + /* TMP275A */ + /* TMP275A */ + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + +}; + +&i2c12 { + status = "disabled"; +}; + +&i2c13 { + status = "disabled"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index 5f4ee67ac787..4d070d6ba09f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -4,6 +4,7 @@ #include "aspeed-g6.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> #include <dt-bindings/leds/leds-pca955x.h> / { @@ -438,7 +439,13 @@ }; &i2c0 { + multi-master; status = "okay"; + + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; }; &i2c1 { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 9c91afb2b404..a93009aa2f04 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -425,7 +425,6 @@ interrupts = <8>; clocks = <&syscon ASPEED_CLK_APB>; no-loopback-test; - aspeed,sirq-polarity-sense = <&syscon 0x70 25>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi index 7468f102bd76..c0c43b8644ee 100644 --- a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi +++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi @@ -47,25 +47,12 @@ status = "okay"; m25p,fast-read; label = "spi0.0"; - -#include "facebook-bmc-flash-layout.dtsi" }; fmc_flash1: flash@1 { status = "okay"; m25p,fast-read; label = "spi0.1"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - flash1@0 { - reg = <0x0 0x2000000>; - label = "flash1"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index dbfefef2869d..713d18f80356 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -22,7 +22,7 @@ bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; }; - memory { + memory@20000000 { /* 128 MB, change this for 256 MB revision */ reg = <0x20000000 0x8000000>; }; @@ -93,6 +93,7 @@ pinctrl-0 = < &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts index 0267e72c074a..2c52a71752c2 100644 --- a/arch/arm/boot/dts/at91-ariettag25.dts +++ b/arch/arm/boot/dts/at91-ariettag25.dts @@ -15,7 +15,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; @@ -48,6 +48,7 @@ pinctrl-0 = < &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index feebd54f670e..ee0f5da6d819 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -20,7 +20,7 @@ bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait"; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; @@ -112,6 +112,7 @@ &pinctrl_board_mmc0 &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index 73e88d1ba4ed..04cb7bee937d 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -34,6 +34,7 @@ pinctrl-0 = < &pinctrl_mmc1_slot0_clk_cmd_dat0 &pinctrl_mmc1_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index 683b9e37f9c5..7edf057047f8 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -17,7 +17,7 @@ bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -55,6 +55,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 7d938ccf71b0..7add151f6250 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -18,7 +18,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x2000000>; }; diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi index af38253a6e7a..25f761065106 100644 --- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi @@ -17,7 +17,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi index fddf267b2d17..d37724c10695 100644 --- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi @@ -16,7 +16,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi index 41f163955b1e..533a440d5583 100644 --- a/arch/arm/boot/dts/at91-linea.dtsi +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -13,7 +13,7 @@ compatible = "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; }; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index a50b7fd2149f..969d990767fc 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -14,7 +14,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -52,6 +52,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot0_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts index 954404ed8158..1e2a28c2f365 100644 --- a/arch/arm/boot/dts/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts @@ -15,7 +15,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -49,6 +49,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 7abf555cd2fe..cf13632edd44 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index 0be184a870eb..710cb72bda5a 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -9,7 +9,7 @@ model = "Aries/DENX MA5D4"; compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5"; - memory { + memory@20000000 { reg = <0x20000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 924d9491780d..e5974a17374c 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 0cc1cff13e46..fe432b6b7e95 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi index 241682a207c5..39474a112b16 100644 --- a/arch/arm/boot/dts/at91-som60.dtsi +++ b/arch/arm/boot/dts/at91-som60.dtsi @@ -16,7 +16,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 15050fdd479d..a51a3372afa1 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi index ebe61a25ca96..430c75358086 100644 --- a/arch/arm/boot/dts/at91-wb45n.dtsi +++ b/arch/arm/boot/dts/at91-wb45n.dtsi @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -145,6 +145,7 @@ }; &mmc0 { + pinctrl-names = "default"; pinctrl-0 = < &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi index 1487b893cfa7..74b249bb6351 100644 --- a/arch/arm/boot/dts/at91-wb50n.dtsi +++ b/arch/arm/boot/dts/at91-wb50n.dtsi @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index a5040f5ea641..d1181ead18e5 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -39,16 +39,17 @@ ssc2 = &ssc2; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm920t"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x04000000>; }; @@ -70,6 +71,9 @@ sram: sram@200000 { compatible = "mmio-sram"; reg = <0x00200000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00200000 0x4000>; }; ahb { @@ -169,7 +173,6 @@ clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 1e0bf5afa913..e1ef4e44e663 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -15,7 +15,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 6afbb48e7ff0..82c5d7fd9811 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -36,16 +36,17 @@ ssc0 = &ssc0; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x04000000>; }; @@ -73,6 +74,9 @@ sram0: sram@2ff000 { compatible = "mmio-sram"; reg = <0x002ff000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x002ff000 0x2000>; }; ahb { @@ -650,7 +654,6 @@ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "mci_clk"; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index 81f808a10931..d3446e42b598 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -16,7 +16,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -55,6 +55,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { reg = <1>; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 5ed3d745ac86..7adc36ca8a46 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -33,16 +33,17 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x08000000>; }; @@ -64,6 +65,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x28000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x28000>; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index c4ef74fea97c..beed819609e8 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 5c990cfae254..fe45d96239c9 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -35,16 +35,17 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x08000000>; }; @@ -66,11 +67,17 @@ sram0: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x14000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x14000>; }; sram1: sram@500000 { compatible = "mmio-sram"; reg = <0x00500000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00500000 0x4000>; }; ahb { @@ -647,7 +654,6 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; @@ -659,7 +665,6 @@ compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 62d218542a48..71f60576761a 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -72,6 +72,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot0_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 4117cf880508..708e1646b7f4 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -11,7 +11,7 @@ model = "Atmel AT91SAM9G20 family SoC"; compatible = "atmel,at91sam9g20"; - memory { + memory@20000000 { reg = <0x20000000 0x08000000>; }; @@ -22,6 +22,9 @@ sram1: sram@2fc000 { compatible = "mmio-sram"; reg = <0x002fc000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x002fc000 0x8000>; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index bda22700110c..6e6e672c0b86 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -13,7 +13,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -93,6 +93,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { reg = <1>; diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts new file mode 100644 index 000000000000..7da70aeeb528 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the GARDENA smart Gateway (Article No. 19000) + * + * Copyright (C) 2020 GARDENA GmbH + */ + +/dts-v1/; + +#include "at91sam9g25.dtsi" +#include "at91sam9x5ek.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "GARDENA smart Gateway (Article No. 19000)"; + compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5", + "atmel,at91sam9"; + + aliases { + serial1 = &usart3; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user_btn1 { + label = "USER_BTN1"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PROG1>; + }; + }; + + 1wire_cm { + status = "disabled"; + }; + + leds { + compatible = "gpio-leds"; + + power_blue { + label = "smartgw:power:blue"; + gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_green { + label = "smartgw:power:green"; + gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + power_red { + label = "smartgw:power:red"; + gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_blue { + label = "smartgw:radio:blue"; + gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_green { + label = "smartgw:radio:green"; + gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_red { + label = "smartgw:radio:red"; + gpios = <&pioC 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_blue { + label = "smartgw:internet:blue"; + gpios = <&pioC 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_green { + label = "smartgw:internet:green"; + gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_red { + label = "smartgw:internet:red"; + gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + heartbeat { + label = "smartgw:heartbeat"; + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + pb18 { + status = "disabled"; + }; + + pd21 { + status = "disabled"; + }; + }; +}; + +&macb0 { + phy-mode = "rmii"; + status = "okay"; +}; + +&usart0 { + status = "disabled"; +}; + +&usart2 { + status = "disabled"; +}; + +&usart3 { + status = "okay"; + + pinctrl-0 = <&pinctrl_usart3 + &pinctrl_usart3_rts + &pinctrl_usart3_cts + >; +}; + +&watchdog { + status = "okay"; +}; + +&mmc0 { + status = "disabled"; +}; + +&mmc1 { + status = "disabled"; +}; + +&spi0 { + status = "disabled"; +}; + +&i2c0 { + status = "disabled"; +}; + +&adc0 { + status = "disabled"; +}; + +&ssc0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 1fbee2a7785f..19fc748a87c5 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -41,16 +41,17 @@ pwm0 = &pwm0; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@70000000 { device_type = "memory"; reg = <0x70000000 0x10000000>; }; @@ -78,6 +79,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x10000>; }; ahb { @@ -871,7 +875,6 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; @@ -885,7 +888,6 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index a3a5c82d9f29..9734667abbfc 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@70000000 { reg = <0x70000000 0x4000000>; }; @@ -99,6 +99,7 @@ &pinctrl_board_mmc0 &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; @@ -112,6 +113,7 @@ &pinctrl_board_mmc1 &pinctrl_mmc1_slot0_clk_cmd_dat0 &pinctrl_mmc1_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index a994d076dc7e..0785389f5507 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -37,16 +37,17 @@ pwm0 = &pwm0; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x10000000>; }; @@ -68,6 +69,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x8000>; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 870b83ff6b97..2bc4e6e0a923 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 4d70194fd808..5653e70c84b4 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -38,16 +38,17 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x04000000>; }; @@ -75,6 +76,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x10000>; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 0de75d3c4f18..1590862f16f2 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 948fe99ab6c3..4cdb05079cc7 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -39,16 +39,17 @@ pwm0 = &pwm0; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x10000000>; }; @@ -76,6 +77,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x8000>; }; ahb { @@ -647,7 +651,6 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; - pinctrl-names = "default"; clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "mci_clk"; #address-cells = <1>; @@ -661,7 +664,6 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; - pinctrl-names = "default"; clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "mci_clk"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 75d2f7fd314f..cdd37f67280b 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -7,7 +7,7 @@ */ / { - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index c934928742b0..6d1264de6060 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -56,6 +56,7 @@ &pinctrl_board_mmc0 &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { @@ -70,6 +71,7 @@ &pinctrl_board_mmc1 &pinctrl_mmc1_slot0_clk_cmd_dat0 &pinctrl_mmc1_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi index 3f9d8caf8b0a..f571f77779c3 100644 --- a/arch/arm/boot/dts/at91sam9xe.dtsi +++ b/arch/arm/boot/dts/at91sam9xe.dtsi @@ -19,5 +19,8 @@ sram1: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x4000>; }; }; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 35bdd0969f0a..dacaef2c14ca 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -234,8 +234,8 @@ compatible = "arm,sp805" , "arm,primecell"; reg = <0x18009000 0x1000>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "wdog_clk", "apb_pclk"; }; gpio_ccm: gpio@1800a000 { diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index c846fa3c244d..e895f7cb8c9f 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -368,7 +368,7 @@ }; ccbtimer0: timer@34000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x34000 0x1000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; @@ -377,7 +377,7 @@ }; ccbtimer1: timer@35000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x35000 0x1000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; @@ -438,7 +438,7 @@ reg = <0x39000 0x1000>; interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>, <&iprocslow>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; lcpll0: lcpll0@3f100 { diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index e94244a215af..09a1182c2936 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -70,6 +70,14 @@ }; }; +&ddc0 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + &firmware { firmware_clocks: clocks { compatible = "raspberrypi,firmware-clocks"; @@ -170,6 +178,38 @@ "RGMII_TXD3"; }; +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + status = "okay"; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + status = "okay"; +}; + +&hvs { + clocks = <&firmware_clocks 4>; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; @@ -253,3 +293,11 @@ &vchiq { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; + +&vc4 { + status = "okay"; +}; + +&vec { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 00bcaed1be32..4847dd305317 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -12,6 +12,18 @@ interrupt-parent = <&gicv2>; + vc4: gpu { + compatible = "brcm,bcm2711-vc5"; + status = "disabled"; + }; + + clk_27MHz: clk-27M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + clock-output-names = "27MHz-clock"; + }; + clk_108MHz: clk-108M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -238,6 +250,27 @@ status = "disabled"; }; + pixelvalve0: pixelvalve@7e206000 { + compatible = "brcm,bcm2711-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve1: pixelvalve@7e207000 { + compatible = "brcm,bcm2711-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve2: pixelvalve@7e20a000 { + compatible = "brcm,bcm2711-pixelvalve2"; + reg = <0x7e20a000 0x100>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + pwm1: pwm@7e20c800 { compatible = "brcm,bcm2835-pwm"; reg = <0x7e20c800 0x28>; @@ -248,10 +281,25 @@ status = "disabled"; }; - hvs@7e400000 { + pixelvalve4: pixelvalve@7e216000 { + compatible = "brcm,bcm2711-pixelvalve4"; + reg = <0x7e216000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hvs: hvs@7e400000 { + compatible = "brcm,bcm2711-hvs"; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; }; + pixelvalve3: pixelvalve@7ec12000 { + compatible = "brcm,bcm2711-pixelvalve3"; + reg = <0x7ec12000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + dvp: clock@7ef00000 { compatible = "brcm,brcm2711-dvp"; reg = <0x7ef00000 0x10>; @@ -259,6 +307,78 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + hdmi0: hdmi@7ef00700 { + compatible = "brcm,bcm2711-hdmi0"; + reg = <0x7ef00700 0x300>, + <0x7ef00300 0x200>, + <0x7ef00f00 0x80>, + <0x7ef00f80 0x80>, + <0x7ef01b00 0x200>, + <0x7ef01f00 0x400>, + <0x7ef00200 0x80>, + <0x7ef04300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 0>; + ddc = <&ddc0>; + dmas = <&dma 10>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc0: i2c@7ef04500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; + + hdmi1: hdmi@7ef05700 { + compatible = "brcm,bcm2711-hdmi1"; + reg = <0x7ef05700 0x300>, + <0x7ef05300 0x200>, + <0x7ef05f00 0x80>, + <0x7ef05f80 0x80>, + <0x7ef06b00 0x200>, + <0x7ef06f00 0x400>, + <0x7ef00280 0x80>, + <0x7ef09300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + ddc = <&ddc1>; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 1>; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc1: i2c@7ef09500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; }; /* diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts new file mode 100644 index 000000000000..3b978dc8997a --- /dev/null +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Meraki MR32 / Codename: Espresso + * + * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708"; + model = "Meraki MR32"; + + chosen { + bootargs = " console=ttyS0,115200n8 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + device_type = "memory"; + }; + + aliases { + serial1 = &uart2; + }; + + leds { + compatible = "gpio-leds"; + + sysled3 { + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_AMBER>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + sysled2 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + red { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm 0 50000 0>; + max-brightness = <255>; + }; + + green { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm 1 50000 0>; + max-brightness = <255>; + }; + + blue { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm 2 50000 0>; + max-brightness = <255>; + }; + }; + + i2c { + /* + * The platform provided I2C does not budge. + * This is a replacement until I can figure + * out what are the missing bits... + */ + + compatible = "i2c-gpio"; + sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <10>; /* close to 100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + current_sense: ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + shunt-resistor = <60000>; /* = 60 mOhms */ + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + }; + }; +}; + +&uart0 { + clock-frequency = <62500000>; + /delete-property/ clocks; +}; + +&uart1 { + status = "disabled"; +}; + +&uart2 { + status = "okay"; + /* + * bluetooth-le { + * compatible = "brcm,bcm20732"; + * enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + *}; + */ +}; + +&gmac1 { + status = "disabled"; +}; +&gmac2 { + status = "disabled"; +}; +&gmac3 { + status = "disabled"; +}; + +&pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_pwm>; +}; + +&nandcs { + nand-ecc-algo = "hw"; + + partitions { + /* + * The partition autodetection does not work for this device. + * It will only detect the "nvram" partition with an incorrect size. + * [ 1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0 + * [ 1.727962] Creating 1 MTD partitions on "brcmnand.0": + * [ 1.733117] 0x000000400000-0x000008000000 : "nvram" + */ + + compatible = "fixed-partitions"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition0@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition1@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + read-only; + }; + + partition2@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + read-only; + }; + + partition3@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + read-only; + }; + + partition4@800000 { + label = "ubi"; + reg = <0x800000 0x7780000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 0016720ce530..ac3a99cf2079 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -252,6 +252,10 @@ reg = <0x00013000 0x1000>; }; + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; + }; + usb2: usb2@21000 { reg = <0x00021000 0x1000>; @@ -350,6 +354,14 @@ }; }; + pwm: pwm@18002000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18002000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + mdio: mdio@18003000 { compatible = "brcm,iproc-mdio"; reg = <0x18003000 0x8>; @@ -384,6 +396,15 @@ reg = <0x18105000 0x1000>; }; + uart2: serial@18008000 { + compatible = "ns16550a"; + reg = <0x18008000 0x20>; + clocks = <&iprocslow>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; @@ -417,12 +438,12 @@ function = "spi"; }; - i2c { + pinmux_i2c: i2c { groups = "i2c_grp"; function = "i2c"; }; - pwm { + pinmux_pwm: pwm { groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; function = "pwm"; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 716da62f5788..21f922dc6019 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -196,7 +196,7 @@ }; &sdio { - status = "ok"; + status = "okay"; }; &uart0 { diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 7b84b54436ed..7782b61c51a1 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -208,7 +208,7 @@ &sdio { bus-width = <4>; no-1-8-v; - status = "ok"; + status = "okay"; }; &srab { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a952d934fcf2..38530dbb89a0 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -537,24 +537,23 @@ ti,no-idle-on-init; }; -&mac { +&mac_sw { status = "okay"; - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { ethphy0: ethernet-phy@2 { reg = <2>; }; @@ -565,7 +564,7 @@ }; &dcan1 { - status = "ok"; + status = "okay"; pinctrl-names = "default", "sleep", "active"; pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index f43b764cc0c7..3bf90d9e3335 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -3038,60 +3038,6 @@ */ ti,no-idle; - mac: ethernet@0 { - compatible = "ti,dra7-cpsw","ti,cpsw"; - clocks = <&gmac_main_clk>, <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>; - clock-names = "fck", "cpts"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x784CFE14>; - cpts_clock_shift = <29>; - reg = <0x0 0x1000 - 0x1200 0x2e00>; - #address-cells = <1>; - #size-cells = <1>; - - /* - * rx_thresh_pend - * rx_pend - * tx_pend - * misc_pend - */ - interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; - ranges = <0 0 0x4000>; - syscon = <&scm_conf>; - status = "disabled"; - - davinci_mdio: mdio@1000 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - clocks = <&gmac_main_clk>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <0>; - bus_freq = <1000000>; - reg = <0x1000 0x100>; - }; - - cpsw_emac0: slave@200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 1>; - }; - - cpsw_emac1: slave@300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 2>; - }; - }; - mac_sw: switch@0 { compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch"; reg = <0x0 0x4000>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index cca6b123856f..4e1bbc0198eb 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -37,8 +37,8 @@ serial7 = &uart8; serial8 = &uart9; serial9 = &uart10; - ethernet0 = &cpsw_emac0; - ethernet1 = &cpsw_emac1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; d_can0 = &dcan1; d_can1 = &dcan2; spi0 = &qspi; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 10da51bee42f..cad58f733bd6 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -219,26 +219,26 @@ vqmmc-supply = <&evm_1v8_sw>; }; -&mac { +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ - dual_emac; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 9273a7d6fa29..b65b2dd094d0 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -462,12 +462,8 @@ }; }; -&mac { - status = "okay"; -}; - &dcan1 { - status = "ok"; + status = "okay"; pinctrl-names = "default", "sleep", "active"; pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; @@ -536,11 +532,11 @@ }; &dss { - status = "ok"; + status = "okay"; }; &hdmi { - status = "ok"; + status = "okay"; port { hdmi_out: endpoint { diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 54dab0f212d1..f242b937f88c 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -77,26 +77,26 @@ interrupts = <30 IRQ_TYPE_EDGE_FALLING>; }; -&mac { +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ - dual_emac; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 6ea9936f7d9c..5f62f92eb96c 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -69,17 +69,22 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; }; -&mac { - slaves = <1>; +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; -&davinci_mdio { +&davinci_mdio_sw { ethphy0: ethernet-phy@3 { reg = <3>; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 803981cc762e..9bd01ae40b1d 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -475,25 +475,23 @@ status = "disabled"; }; -&mac { +&mac_sw { status = "okay"; - - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; @@ -522,12 +520,12 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&ldo5_reg>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo1_reg>; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 96678ddbb4e6..ecfaa0b7523e 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -195,7 +195,7 @@ clock-names = "sclk"; }; - pfc: pin-controller@e0140200 { + pfc: pinctrl@e0140200 { compatible = "renesas,pfc-emev2"; reg = <0xe0140200 0x100>; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 052a52f947ce..ad7a0850252a 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2"; }; - memory { + memory@20000000 { reg = <0x20000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 6c2f320be2f4..12887b3924af 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -55,6 +55,10 @@ assigned-clock-rates = <6000000>; }; +&cmu { + clocks = <&xusbxti>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index ca29d7ed8216..c1a68e612037 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -26,7 +26,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x1ff00000>; + reg = <0x40000000 0x1ff00000>; }; firmware@205f000 { @@ -164,6 +164,10 @@ status = "okay"; }; +&cmu { + clocks = <&xusbxti>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index aba8350cfdaf..b55afaaa691e 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -30,7 +30,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x1ff00000>; + reg = <0x40000000 0x1ff00000>; }; firmware@205f000 { @@ -205,6 +205,10 @@ status = "okay"; }; +&cmu { + clocks = <&xusbxti>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index d3fb45a56527..a1e93fb7f694 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -97,33 +97,25 @@ }; }; - fixed-rate-clocks { - #address-cells = <1>; - #size-cells = <0>; - - xusbxti: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xusbxti"; - }; + xusbxti: clock-0 { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; - xxti: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xxti"; - }; + xxti: clock-1 { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; - xtcxo: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xtcxo"; - }; + xtcxo: clock-2 { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; }; pmu { @@ -362,7 +354,7 @@ }; hsotg: hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg", "snps,dwc2"; + compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_USBOTG>; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 6d0c04d77a39..5370ee477186 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -123,7 +123,7 @@ reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; }; - i2c_max17042_fuel: i2c-gpio { + i2c_max17042_fuel: i2c-gpio-0 { compatible = "i2c-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -147,7 +147,7 @@ }; }; - spi-lcd { + spi-3 { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -209,20 +209,12 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; - }; - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz */ - cooling-device = <&cpu0 2 2>; - }; - map1 { - /* Corresponds to 200MHz */ - cooling-device = <&cpu0 4 4>; - }; - }; + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on max8997 PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; }; }; @@ -235,6 +227,19 @@ cpu0-supply = <&varm_breg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; +}; + &ehci { status = "okay"; @@ -304,8 +309,6 @@ status = "okay"; mali-supply = <&vg3d_breg>; - regulator-microvolt-offset = <50000>; - regulator-microsecs-delay = <50>; }; &hsotg { @@ -524,6 +527,7 @@ regulator-name = "G3D_1.1V"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1200000>; + regulator-microvolt-offset = <50000>; regulator-always-on; }; @@ -569,6 +573,16 @@ regulator-max-microvolt = <4100000>; regulator-always-on; }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; + + EN32KHZ_CP { + regulator-name = "EN32KHZ_CP"; + regulator-always-on; + }; }; }; }; @@ -667,7 +681,7 @@ samsung,pin-val = <0>; }; - mag_mhl_gpio: mag-mhl-gpio { + mag_mhl_gpio: mag-mhl { samsung,pins = "gpd0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -689,6 +703,12 @@ }; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_0 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 890525b10d22..7d2cfbafefb2 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -100,6 +100,13 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on max8997 PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; display-timings { @@ -122,6 +129,19 @@ cpu0-supply = <&buck1_reg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; +}; + &exynos_usbphy { status = "okay"; }; @@ -286,6 +306,11 @@ regulator-boot-on; regulator-always-on; }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; }; }; }; @@ -331,6 +356,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &tmu { diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 77fc11e593ad..c5609afa6101 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -40,6 +40,26 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; }; }; @@ -148,6 +168,11 @@ }; }; +&rtc { + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_2 { bus-width = <4>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 5cc96f04a4fa..a226bec56a45 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -132,23 +132,14 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; - }; - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 2 2>, <&cpu1 2 2>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 4 4>, <&cpu1 4 4>; - }; - }; + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on max8997 PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; }; - }; &camera { @@ -161,6 +152,19 @@ cpu0-supply = <&varm_breg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 2 2>, <&cpu1 2 2>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 4 4>, <&cpu1 4 4>; + }; + }; +}; + &dsi_0 { vddcore-supply = <&vusb_reg>; vddio-supply = <&vmipi_reg>; @@ -314,140 +318,156 @@ regulators { valive_reg: LDO2 { - regulator-name = "VALIVE_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; }; vusb_reg: LDO3 { - regulator-name = "VUSB_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; }; vmipi_reg: LDO4 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; vpda_reg: LDO6 { - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; vcam_reg: LDO7 { - regulator-name = "CAM_ISP_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; vusbdac_reg: LDO8 { - regulator-name = "VUSB+VDAC_3.3V_C210"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VUSB+VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; vccpda_reg: LDO9 { - regulator-name = "VCC_2.8V_PDA"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; }; vpll_reg: LDO10 { - regulator-name = "VPLL_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; + regulator-name = "VPLL_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; }; vtcam_reg: LDO12 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; vcclcd_reg: LDO13 { - regulator-name = "VCC_3.3V_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VCC_3.3V_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; vlcd_reg: LDO15 { - regulator-name = "VLCD_2.2V"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; + regulator-name = "VLCD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; }; camsensor_reg: LDO16 { - regulator-name = "CAM_SENSOR_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; tflash_reg: LDO17 { - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; }; vddq_reg: LDO21 { - regulator-name = "VDDQ_M1M2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; }; varm_breg: BUCK1 { - regulator-name = "VARM_1.2V_C210"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; }; vint_breg: BUCK2 { - regulator-name = "VINT_1.1V_C210"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; }; camisp_breg: BUCK4 { - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; }; vmem_breg: BUCK5 { - regulator-name = "VMEM_1.2V_C210"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; + regulator-name = "VMEM_1.2V_C210"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; }; vccsub_breg: BUCK7 { - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; }; safe1_sreg: ESAFEOUT1 { - regulator-name = "SAFEOUT1"; + regulator-name = "SAFEOUT1"; }; safe2_sreg: ESAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-boot-on; + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; + + EN32KHZ_CP { + regulator-name = "EN32KHZ_CP"; + regulator-always-on; }; }; }; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_0 { bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 99ce53b120ac..08284e8f3624 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -39,10 +39,17 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; vemmc_reg: voltage-regulator { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "VMEM_VDD_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -104,7 +111,7 @@ }; tsp_reg: voltage-regulator { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "TSP_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -112,13 +119,13 @@ enable-active-high; }; - spi-lcd { + spi-3 { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; - gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; @@ -192,6 +199,19 @@ cpu0-supply = <&vdd_arm_reg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; +}; + &ehci { status = "okay"; phys = <&exynos_usbphy 1>; @@ -537,6 +557,12 @@ status = "okay"; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_0 { bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 33435ce79ce4..fddc661ded28 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -102,6 +102,8 @@ reg = <0x10502000 0x1000>; cache-unified; cache-level = <2>; + prefetch-data = <1>; + prefetch-instr = <1>; arm,tag-latency = <2 2 1>; arm,data-latency = <2 2 1>; }; @@ -363,26 +365,24 @@ }; }; }; +}; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert0: cpu-alert-0 { - temperature = <85000>; /* millicelsius */ - }; - cpu_alert1: cpu-alert-1 { - temperature = <100000>; /* millicelsius */ - }; - cpu_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ - }; - }; - }; - }; +&cpu_alert0 { + temperature = <85000>; /* millicelsius */ +}; + +&cpu_alert1 { + temperature = <100000>; /* millicelsius */ +}; + +&cpu_alert2 { + temperature = <110000>; /* millicelsius */ +}; + +&cpu_thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; }; &gic { diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 53b3ca3effab..89ed81fb348d 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -33,7 +33,7 @@ }; }; - lcd_vdd3_reg: voltage-regulator-7 { + lcd_vdd3_reg: voltage-regulator-10 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; @@ -42,7 +42,7 @@ enable-active-high; }; - ps_als_reg: voltage-regulator-8 { + ps_als_reg: voltage-regulator-11 { compatible = "regulator-fixed"; regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; @@ -171,6 +171,44 @@ status = "okay"; }; +&sound { + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + "SPK", "SPKOUTRN", + "SPK", "SPKOUTRP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "HDMI", "LINEOUT1N", + "HDMI", "LINEOUT1P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "MICBIAS1", + "IN1LN", "MICBIAS1", + "Main Mic", "MICBIAS1", + + "IN1RP", "Sub Mic", + "IN1RN", "Sub Mic", + + "IN2LP:VXRN", "MICBIAS2", + "Headset Mic", "MICBIAS2", + + "IN2RN", "FM In", + "IN2RP:VXRP", "FM In"; +}; + +&submic_bias_reg { + gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>; + enable-active-high; +}; + &touchkey_reg { gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts index f8125a945f8d..07fbcf845c49 100644 --- a/arch/arm/boot/dts/exynos4412-i9300.dts +++ b/arch/arm/boot/dts/exynos4412-i9300.dts @@ -17,6 +17,10 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x40000000>; + reg = <0x40000000 0x40000000>; }; }; + +&sound { + fm-sel-gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts index 54a2a55dbf70..6bc3d897f432 100644 --- a/arch/arm/boot/dts/exynos4412-i9305.dts +++ b/arch/arm/boot/dts/exynos4412-i9305.dts @@ -10,7 +10,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x80000000>; + reg = <0x40000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 2c8111c6b065..7e7c243ff196 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -37,12 +37,12 @@ fixed-rate-clocks { xxti { - compatible = "samsung,clock-xxti", "fixed-clock"; + compatible = "samsung,clock-xxti"; clock-frequency = <0>; }; xusbxti { - compatible = "samsung,clock-xusbxti", "fixed-clock"; + compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; }; @@ -102,6 +102,30 @@ status = "disabled"; }; + vbatt_reg: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "VBATT"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + mic_bias_reg: voltage-regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + submic_bias_reg: voltage-regulator-9 { + compatible = "regulator-fixed"; + regulator-name = "SUB_MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -266,16 +290,18 @@ clock-names = "ext_clock"; }; - sound { - compatible = "samsung,trats2-audio"; - samsung,i2s-controller = <&i2s0>; - samsung,model = "Trats2"; - samsung,audio-codec = <&wm1811>; - samsung,audio-routing = - "SPK", "SPKOUTLN", - "SPK", "SPKOUTLP", - "SPK", "SPKOUTRN", - "SPK", "SPKOUTRP"; + sound: sound { + compatible = "samsung,midas-audio"; + model = "Midas"; + mic-bias-supply = <&mic_bias_reg>; + submic-bias-supply = <&submic_bias_reg>; + + cpu { + sound-dai = <&i2s0 0>; + }; + codec { + sound-dai = <&wm1811>; + }; }; thermistor-ap { @@ -293,25 +319,6 @@ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, - <&cpu2 7 7>, <&cpu3 7 7>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>, - <&cpu1 13 13>, - <&cpu2 13 13>, - <&cpu3 13 13>; - }; - }; - }; - }; }; &adc { @@ -380,6 +387,21 @@ cpu0-supply = <&buck2_reg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + &csis_0 { status = "okay"; vddcore-supply = <&ldo8_reg>; @@ -597,11 +619,37 @@ wm1811: wm1811@1a { compatible = "wlf,wm1811"; reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; - DCVDD-supply = <&ldo3_reg>; + clocks = <&pmu_system_controller 0>, + <&max77686 MAX77686_CLK_PMIC>; + clock-names = "MCLK1", "MCLK2"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpx3>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + #sound-dai-cells = <0>; + + wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0 + 0x0 0x8000 0x0 0x0 0x0>; + wlf,micbias-cfg = <0x2f 0x2b>; + + wlf,lineout1-feedback; + wlf,lineout1-se; + wlf,lineout2-se; + wlf,ldoena-always-driven; + + AVDD2-supply = <&vbatt_reg>; DBVDD1-supply = <&ldo3_reg>; + DBVDD2-supply = <&vbatt_reg>; + DBVDD3-supply = <&vbatt_reg>; + DCVDD-supply = <&ldo3_reg>; + CPVDD-supply = <&vbatt_reg>; + SPKVDD1-supply = <&vbatt_reg>; + SPKVDD2-supply = <&vbatt_reg>; wlf,ldo1ena = <&gpj0 4 0>; + wlf,ldo2ena = <&gpj0 4 0>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index 4189e1fb204c..a47b7f35fc80 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -8,12 +8,12 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x80000000>; + reg = <0x40000000 0x80000000>; }; /* bootargs are passed in by bootloader */ - cam_vdda_reg: voltage-regulator-7 { + cam_vdda_reg: voltage-regulator-10 { compatible = "regulator-fixed"; regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; @@ -74,6 +74,41 @@ status = "okay"; }; +&sound { + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "HDMI", "LINEOUT1N", + "HDMI", "LINEOUT1P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "MICBIAS2", + "IN1LN", "MICBIAS2", + "Headset Mic", "MICBIAS2", + + "IN1RP", "Sub Mic", + "IN1RN", "Sub Mic", + + "IN2LP:VXRN", "Main Mic", + "IN2LN", "Main Mic", + + "IN2RN", "FM In", + "IN2RP:VXRP", "FM In"; +}; + +&submic_bias_reg { + regulator-always-on; +}; + &touchkey_reg { gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index a5c1ce1e396c..ab291cec650a 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -66,25 +66,6 @@ clock-frequency = <24000000>; }; }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - cooling_map0: map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, - <&cpu2 7 7>, <&cpu3 7 7>; - }; - cooling_map1: map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>, - <&cpu1 13 13>, - <&cpu2 13 13>, - <&cpu3 13 13>; - }; - }; - }; - }; }; &bus_dmc { @@ -141,6 +122,7 @@ }; &clock { + clocks = <&clock CLK_XUSBXTI>; assigned-clocks = <&clock CLK_FOUT_EPLL>; assigned-clock-rates = <45158401>; }; @@ -174,6 +156,21 @@ }; }; +&cpu_thermal { + cooling-maps { + cooling_map0: map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + cooling_map1: map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 8ff243ba4542..b8549d846f86 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -37,31 +37,6 @@ #cooling-cells = <2>; cooling-levels = <0 102 170 230>; }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - trip = <&cpu_alert1>; - cooling-device = <&cpu0 9 9>, <&cpu1 9 9>, - <&cpu2 9 9>, <&cpu3 9 9>, - <&fan0 1 2>; - }; - map1 { - trip = <&cpu_alert2>; - cooling-device = <&cpu0 15 15>, - <&cpu1 15 15>, - <&cpu2 15 15>, - <&cpu3 15 15>, - <&fan0 2 3>; - }; - map2 { - trip = <&cpu_alert0>; - cooling-device = <&fan0 0 1>; - }; - }; - }; - }; }; &adc { @@ -76,6 +51,27 @@ regulator-max-microvolt = <3300000>; }; +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>, + <&cpu2 9 9>, <&cpu3 9 9>, + <&fan0 1 2>; + }; + map1 { + trip = <&cpu_alert2>; + cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, + <&cpu2 15 15>, <&cpu3 15 15>, + <&fan0 2 3>; + }; + map2 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + }; +}; + &hdmicec { needs-hpd; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 8b11ad391252..c2e793b69e7d 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "exynos-mfc-reserved-memory.dtsi" @@ -74,6 +75,21 @@ cpu0-supply = <&buck2_reg>; }; +&cpu_thermal { + cooling-maps { + cooling_map0: map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + cooling_map1: map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + &exynos_usbphy { status = "okay"; }; @@ -129,6 +145,13 @@ <1200000>, <1200000>, <1200000>, <1200000>; + s5m8767_osc: clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "s5m8767_ap", "s5m8767_cp", + "s5m8767_bt"; + }; + regulators { ldo1_reg: LDO1 { regulator-name = "VDD_ALIVE"; @@ -499,6 +522,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; &sdhci_2 { diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index e70fb6e601f0..49971203a8aa 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -37,6 +37,28 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&cpu_thermal { + cooling-maps { + cooling_map0: map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + cooling_map1: map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; }; }; @@ -127,6 +149,11 @@ }; }; +&rtc { + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_2 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index 3a91de8a8082..017b26108bb0 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -65,6 +65,13 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; panel { @@ -78,6 +85,21 @@ }; }; +&cpu_thermal { + cooling-maps { + cooling_map0: map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + cooling_map1: map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + &fimd { pinctrl-0 = <&lcd_clk>, <&lcd_data24>; pinctrl-names = "default"; @@ -95,6 +117,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &sdhci_2 { diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index aac533933c61..7b447b63007e 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -18,7 +18,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x40000000>; + reg = <0x40000000 0x40000000>; }; chosen { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 7002832eb4c0..e76881dc0014 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -76,7 +76,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table0 { compatible = "operating-points-v2"; opp-shared; @@ -218,6 +218,8 @@ reg = <0x10502000 0x1000>; cache-unified; cache-level = <2>; + prefetch-data = <1>; + prefetch-instr = <1>; arm,tag-latency = <2 2 1>; arm,data-latency = <3 2 1>; arm,double-linefill = <1>; @@ -400,7 +402,7 @@ status = "disabled"; }; - bus_dmc_opp_table: opp_table1 { + bus_dmc_opp_table: opp-table1 { compatible = "operating-points-v2"; opp-shared; @@ -427,7 +429,7 @@ }; }; - bus_acp_opp_table: opp_table2 { + bus_acp_opp_table: opp-table2 { compatible = "operating-points-v2"; opp-shared; @@ -493,7 +495,7 @@ status = "disabled"; }; - bus_leftbus_opp_table: opp_table3 { + bus_leftbus_opp_table: opp-table3 { compatible = "operating-points-v2"; opp-shared; @@ -516,7 +518,7 @@ }; }; - bus_display_opp_table: opp_table4 { + bus_display_opp_table: opp-table4 { compatible = "operating-points-v2"; opp-shared; @@ -528,7 +530,7 @@ }; }; - bus_fsys_opp_table: opp_table5 { + bus_fsys_opp_table: opp-table5 { compatible = "operating-points-v2"; opp-shared; @@ -540,7 +542,7 @@ }; }; - bus_peri_opp_table: opp_table6 { + bus_peri_opp_table: opp-table6 { compatible = "operating-points-v2"; opp-shared; @@ -732,7 +734,7 @@ "pmu"; operating-points-v2 = <&gpu_opp_table>; - gpu_opp_table: opp_table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-160000000 { diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 22eb951c614c..9ce9fb3fc190 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -86,7 +86,7 @@ }; gic: interrupt-controller@10481000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x10481000 0x1000>, @@ -211,13 +211,13 @@ }; prng: rng@10830400 { - compatible = "samsung,exynos5250-prng"; - reg = <0x10830400 0x200>; + compatible = "samsung,exynos5250-prng"; + reg = <0x10830400 0x200>; }; trng: rng@10830600 { - compatible = "samsung,exynos5250-trng"; - reg = <0x10830600 0x100>; + compatible = "samsung,exynos5250-trng"; + reg = <0x10830600 0x100>; }; g2d: g2d@10850000 { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 59872d83da6e..79546f11af26 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -243,11 +243,11 @@ s5m8767,pmic-buck3-dvs-voltage = <1100000>; s5m8767,pmic-buck4-dvs-voltage = <1200000>; s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, - <&gpd1 1 GPIO_ACTIVE_HIGH>, - <&gpd1 2 GPIO_ACTIVE_HIGH>; + <&gpd1 1 GPIO_ACTIVE_HIGH>, + <&gpd1 2 GPIO_ACTIVE_HIGH>; s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, - <&gpx2 4 GPIO_ACTIVE_HIGH>, - <&gpx2 5 GPIO_ACTIVE_HIGH>; + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; s5m8767_osc: clocks { compatible = "samsung,s5m8767-clk"; @@ -542,12 +542,6 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; }; &i2s0 { @@ -619,12 +613,16 @@ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; }; +&sata_phy_i2c { + status = "okay"; +}; + &soc { /* * For unknown reasons HDMI-DDC does not work with Exynos I2C * controllers. Lets use software I2C over GPIO pins as a workaround. */ - i2c_ddc: i2c-gpio { + i2c_ddc: i2c-10 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_gpio_bus>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 5c42df024adf..186790f39e4d 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/clock/maxim,max77686.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "exynos5250.dtsi" @@ -129,13 +130,14 @@ reg = <0x50>; }; - max77686@9 { + max77686: pmic@9 { compatible = "maxim,max77686"; reg = <0x09>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; + #clock-cells = <1>; wakeup-source; voltage-regulators { @@ -324,12 +326,6 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - - sata_phy_i2c: sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; }; &i2s0 { @@ -368,6 +364,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; &sata { @@ -379,6 +377,10 @@ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; }; +&sata_phy_i2c { + status = "okay"; +}; + &spi_1 { status = "okay"; cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 3d501926c227..a92ade33779c 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/clock/samsung,s2mps11.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> @@ -114,12 +115,12 @@ wakeup-source; s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */ - <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ - <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */ - <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ - <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ /* * The following arrays of DVS voltages are not used, since we are @@ -127,26 +128,26 @@ * to please the driver. */ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, - <1100000>, <1100000>, - <1000000>, <1000000>, - <1000000>, <1000000>; + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; - clocks { + s5m8767_osc: clocks { compatible = "samsung,s5m8767-clk"; #clock-cells = <1>; clock-output-names = "en32khz_ap", - "en32khz_cp", - "en32khz_bt"; + "en32khz_cp", + "en32khz_bt"; }; regulators { @@ -456,7 +457,7 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - dp_hpd_gpio: dp-hpd-gpio { + dp_hpd_gpio: dp-hpd { samsung,pins = "gpc3-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -522,6 +523,12 @@ }; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + &sd1_bus4 { samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index e3dbe4166836..bd2d8835dd36 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -330,7 +330,7 @@ power-domains = <&pd_g3d>; status = "disabled"; - gpu_opp_table: gpu-opp-table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -473,6 +473,12 @@ clocks = <&clock CLK_SATA_PHYI2C>; clock-names = "i2c"; status = "disabled"; + + sata_phy_i2c: sata-phy-i2c@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + status = "disabled"; + }; }; spi_0: spi@12d20000 { @@ -723,7 +729,7 @@ #dma-requests = <1>; }; - gsc_0: gsc@13e00000 { + gsc_0: gsc@13e00000 { compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -733,7 +739,7 @@ iommus = <&sysmmu_gsc0>; }; - gsc_1: gsc@13e10000 { + gsc_1: gsc@13e10000 { compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; @@ -743,7 +749,7 @@ iommus = <&sysmmu_gsc1>; }; - gsc_2: gsc@13e20000 { + gsc_2: gsc@13e20000 { compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; @@ -753,7 +759,7 @@ iommus = <&sysmmu_gsc2>; }; - gsc_3: gsc@13e30000 { + gsc_3: gsc@13e30000 { compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; @@ -1085,26 +1091,6 @@ }; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tmu 0>; - - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 9 9>, <&cpu1 9 9>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 15 15>, - <&cpu1 15 15>; - }; - }; - }; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -1120,6 +1106,24 @@ }; }; +&cpu_thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 15 15>, + <&cpu1 15 15>; + }; + }; +}; + &dp { power-domains = <&pd_disp1>; clocks = <&clock CLK_DP>; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 154df70128f3..973448c4ad93 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -162,10 +162,8 @@ }; gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; - #address-cells = <0>; - #size-cells = <0>; interrupt-controller; reg = <0x10481000 0x1000>, <0x10482000 0x2000>, diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 4f9297ae0763..75b4150c26d7 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -109,10 +109,10 @@ assigned-clock-parents = <&clock CLK_FOUT_EPLL>, <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <96000000>, - <19200000>; + assigned-clock-rates = <0>, + <0>, + <96000000>, + <19200000>; }; &cpu0_thermal { diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 5282b5deca86..2a3ade77a2de 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -29,6 +29,13 @@ #clock-cells = <0>; }; + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + firmware@2037000 { compatible = "samsung,secure-firmware"; reg = <0x02037000 0x1000>; @@ -79,6 +86,11 @@ }; }; +&rtc { + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sromc { pinctrl-names = "default"; pinctrl-0 = <&srom_ctl>, <&srom_ebi>; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index abe75b9e39f5..60a87684b1af 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -238,16 +238,16 @@ #include "exynos5420-trip-points.dtsi" }; cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" }; cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" }; cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" }; }; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 83fa800fa1eb..4e49d8095b29 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> #include <dt-bindings/gpio/gpio.h> / { @@ -401,6 +402,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; &usbdrd_phy0 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c76460b70532..83580f076a58 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -1199,20 +1199,20 @@ #include "exynos5420-trip-points.dtsi" }; cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" }; cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" }; cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" }; gpu_thermal: gpu-thermal { - thermal-sensors = <&tmu_gpu>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_gpu>; + #include "exynos5420-trip-points.dtsi" }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index afe090578e8f..b1cf9414ce17 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -333,8 +333,8 @@ compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; density = <16384>; io-width = <32>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; tRFC-min-tck = <17>; tRRD-min-tck = <2>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index c3c2d85267da..b5ec4f47eb3a 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -29,30 +29,6 @@ "HiFi Playback", "Mixer DAI TX", "Mixer DAI RX", "HiFi Capture"; - assigned-clocks = <&clock CLK_MOUT_EPLL>, - <&clock CLK_MOUT_MAU_EPLL>, - <&clock CLK_MOUT_USER_MAU_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_DOUT_I2S>; - - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock CLK_MOUT_EPLL>, - <&clock CLK_MOUT_MAU_EPLL>, - <&clock CLK_MAU_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - - assigned-clock-rates = <0>, - <0>, - <0>, - <0>, - <0>, - <196608001>, - <(196608002 / 2)>, - <196608000>; - cpu { sound-dai = <&i2s0 0>, <&i2s0 1>; }; @@ -62,13 +38,6 @@ }; }; -&clock_audss { - assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>, - <&clock CLK_FOUT_EPLL>; - assigned-clock-rates = <(196608000 / 256)>, - <196608000>; -}; - &hsi2c_5 { status = "okay"; max98090: max98090@10 { @@ -84,6 +53,31 @@ &i2s0 { status = "okay"; - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; - assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; + assigned-clocks = <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MOUT_USER_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&i2s0 CLK_I2S_RCLK_SRC>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_DOUT_I2S>; + + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_SCLK_I2S>; + + assigned-clock-rates = <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <196608001>, + <(196608002 / 2)>, + <196608000>; + }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index 892d389d6d09..ddd55d3bcadd 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -35,30 +35,6 @@ samsung,audio-routing = "I2S Playback", "Mixer DAI TX"; - assigned-clocks = <&clock CLK_MOUT_EPLL>, - <&clock CLK_MOUT_MAU_EPLL>, - <&clock CLK_MOUT_USER_MAU_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_DOUT_I2S>; - - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock CLK_MOUT_EPLL>, - <&clock CLK_MOUT_MAU_EPLL>, - <&clock CLK_MAU_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - - assigned-clock-rates = <0>, - <0>, - <0>, - <0>, - <0>, - <196608001>, - <(196608002 / 2)>, - <196608000>; - cpu { sound-dai = <&i2s0 0>, <&i2s0 1>; }; @@ -69,17 +45,35 @@ }; }; -&clock_audss { - assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>, - <&clock CLK_FOUT_EPLL>; - assigned-clock-rates = <(196608000 / 256)>, - <196608000>; -}; - &i2s0 { status = "okay"; - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; - assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; + + assigned-clocks = <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MOUT_USER_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&i2s0 CLK_I2S_RCLK_SRC>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_DOUT_I2S>; + + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_SCLK_I2S>; + + assigned-clock-rates = <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <196608001>, + <(196608002 / 2)>, + <196608000>; }; &pwm { diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index f0af1bf2b4d8..f683440ee569 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -89,7 +89,7 @@ }; sysctrl: system-controller@802000 { - compatible = "hisilicon,sysctrl"; + compatible = "hisilicon,sysctrl", "syscon"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x802000 0x1000>; @@ -111,8 +111,10 @@ reg = <0x800000 0x1000>; /* timer00 & timer01 */ interrupts = <0 0 4>, <0 1 4>; - clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER0_MUX>, + <&clock HI3620_TIMER1_MUX>, + <&clock HI3620_TIMER0_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -121,8 +123,10 @@ reg = <0x801000 0x1000>; /* timer10 & timer11 */ interrupts = <0 2 4>, <0 3 4>; - clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER2_MUX>, + <&clock HI3620_TIMER3_MUX>, + <&clock HI3620_TIMER2_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -131,8 +135,10 @@ reg = <0xa01000 0x1000>; /* timer20 & timer21 */ interrupts = <0 4 4>, <0 5 4>; - clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER4_MUX>, + <&clock HI3620_TIMER5_MUX>, + <&clock HI3620_TIMER4_MUX>; + clock-names = "timer0lck", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -141,8 +147,10 @@ reg = <0xa02000 0x1000>; /* timer30 & timer31 */ interrupts = <0 6 4>, <0 7 4>; - clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER6_MUX>, + <&clock HI3620_TIMER7_MUX>, + <&clock HI3620_TIMER6_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -151,8 +159,10 @@ reg = <0xa03000 0x1000>; /* timer40 & timer41 */ interrupts = <0 96 4>, <0 97 4>; - clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER8_MUX>, + <&clock HI3620_TIMER9_MUX>, + <&clock HI3620_TIMER8_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 4263a9339c2e..555bc6b6720f 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -213,7 +213,7 @@ }; sysctrl: sysctrl { - compatible = "hisilicon,sysctrl"; + compatible = "hisilicon,sysctrl", "syscon"; reg = <0x3e00000 0x00100000>; }; @@ -226,8 +226,8 @@ compatible = "arm,sp804", "arm,primecell"; reg = <0x3000000 0x1000>; interrupts = <0 224 4>; - clocks = <&clk_50m>, <&clk_50m>; - clock-names = "apb_pclk"; + clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; arm-pmu { diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 3ee7967c202d..e2dbf1d8a67b 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -370,8 +370,9 @@ arm,primecell-periphid = <0x00141805>; reg = <0xa2c000 0x1000>; interrupts = <0 29 4>; - clocks = <&clock HIX5HD2_WDG0_RST>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_WDG0_RST>, + <&clock HIX5HD2_WDG0_RST>; + clock-names = "wdog_clk", "apb_pclk"; }; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 0b2701ca2921..8cbaf1c81174 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -53,7 +53,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>; status = "okay"; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 18289f6fb1f3..7f4c602454a5 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -76,7 +76,7 @@ status = "disabled"; }; - gpmi-nand@8000c000 { + nand-controller@8000c000 { compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 111bfdcbe552..f984b702efc5 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -87,6 +87,7 @@ #define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000 #define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000 #define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x05 0x000 +#define MX25_PAD_EB1__CSPI3_SS1 0x044 0x25c 0x4c0 0x06 0x000 #define MX25_PAD_OE__OE 0x048 0x260 0x000 0x00 0x000 #define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x04 0x000 @@ -112,6 +113,7 @@ #define MX25_PAD_CS5__CSPI3_MISO 0x058 0x268 0x4b4 0x06 0x000 #define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000 +#define MX25_PAD_NF_CE0__CSPI1_SS3 0x05c 0x26c 0x490 0x01 0x000 #define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000 #define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000 @@ -122,6 +124,7 @@ #define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000 #define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000 #define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x05 0x000 +#define MX25_PAD_LBA__CSPI3_RDY 0x064 0x274 0x4b0 0x06 0x000 #define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000 #define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000 @@ -285,7 +288,8 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x05 0x000 #define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x00 0x000 -#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x01 0x000 +#define MX25_PAD_CONTRAST__GPT4_CAPIN1 0x118 0x310 0x000 0x01 0x000 +#define MX25_PAD_CONTRAST__CSPI2_SS1 0x118 0x310 0x4a8 0x02 0x000 #define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x04 0x000 #define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x05 0x001 #define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x06 0x000 @@ -298,7 +302,7 @@ #define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x01 0x001 #define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000 #define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x05 0x000 -#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x07 0x000 +#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x4b8 0x07 0x001 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x00 0x000 #define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x01 0x000 @@ -310,23 +314,25 @@ #define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x01 0x001 #define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000 #define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x05 0x000 -#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x07 0x000 +#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x4ac 0x07 0x001 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x00 0x000 #define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x01 0x000 #define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000 #define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x05 0x000 -#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000 +#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x4b0 0x07 0x001 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000 /* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */ #define MX25_PAD_CSI_D6__ESDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 #define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000 +#define MX25_PAD_CSI_D6__CSPI3_SS0 0x130 0x328 0x4bc 0x07 0x001 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000 #define MX25_PAD_CSI_D7__ESDHC2_CLK 0x134 0x32C 0x4dc 0x02 0x001 #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000 +#define MX25_PAD_CSI_D7__CSPI3_SS1 0x134 0x32c 0x4c0 0x07 0x001 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000 #define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x02 0x000 @@ -398,7 +404,7 @@ #define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x00 0x000 #define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x01 0x001 -#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x02 0x000 +#define MX25_PAD_UART1_RTS__GPT3_CAPIN1 0x178 0x370 0x000 0x02 0x000 #define MX25_PAD_UART1_RTS__UART2_DCD 0x178 0x370 0x000 0x03 0x000 #define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x05 0x000 @@ -415,12 +421,14 @@ #define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x00 0x000 #define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x02 0x002 -#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x03 0x000 +#define MX25_PAD_UART2_RTS__GPT1_CAPIN1 0x188 0x380 0x000 0x03 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x05 0x000 +#define MX25_PAD_UART2_RTS__CSPI2_SS3 0x188 0x380 0x000 0x06 0x000 #define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x00 0x000 #define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x02 0x002 #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000 +#define MX25_PAD_UART2_CTS__CSPI3_SS3 0x18c 0x384 0x4c8 0x06 0x001 /* * Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD @@ -446,14 +454,17 @@ #define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000 #define MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x19c 0x394 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA1__CSPI2_RDY 0x19c 0x394 0x498 0x01 0x001 #define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000 #define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000 #define MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x1a0 0x398 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA2__CSPI2_SS0 0x1a0 0x398 0x4a4 0x01 0x001 #define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002 #define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000 #define MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x1a4 0x39c 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA3__CSPI2_SS1 0x1a4 0x39c 0x4a8 0x01 0x001 #define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002 #define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000 @@ -564,11 +575,15 @@ #define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000 #define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001 #define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001 +#define MX25_PAD_GPIO_C__GPT2_CAPIN1 0x1fc 0x3f8 0x000 0x04 0x000 +#define MX25_PAD_GPIO_C__CSPI1_SS2 0x1fc 0x3f8 0x000 0x05 0x000 #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000 +#define MX25_PAD_GPIO_C__CSPI2_SS2 0x1fc 0x3f8 0x000 0x07 0x000 #define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000 #define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001 +#define MX25_PAD_GPIO_D__CSPI3_SS2 0x200 0x3fc 0x4c4 0x07 0x001 #define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000 #define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002 @@ -593,6 +608,7 @@ #define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x06 0x002 #define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x00 0x000 +#define MX25_PAD_VSTBY_ACK__CSPI1_SS3 0x218 0x40c 0x490 0x02 0x001 #define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x05 0x000 #define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x00 0x000 diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index 52c95248e25d..303f920201c5 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -18,8 +18,8 @@ }; &cspi1 { - cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, - <&gpio4 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, + <&gpio4 27 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index bf883e45576a..344e77790152 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -65,7 +65,7 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; - cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, + cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index fc0b318f8733..7bc132737a37 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -558,7 +558,7 @@ }; }; - nfc: nand@d8000000 { + nfc: nand-controller@d8000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx27-nand"; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 3ed2b328f7ef..14a92fe59770 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -17,7 +17,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index c5acc19c982d..b86be320496b 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -13,7 +13,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 96c1d106bc64..7e2b0f198dfa 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -97,7 +97,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg &gpmi_pins_evk>; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 0bac72d5351f..2bdb4c093545 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -16,7 +16,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { #address-cells = <1>; #size-cells = <1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 91bd6deffee5..865ac3d573c7 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -17,7 +17,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { #address-cells = <1>; #size-cells = <1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a2b799c56f8f..94dfbf5b3f34 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -100,7 +100,7 @@ status = "disabled"; }; - gpmi: gpmi-nand@8000c000 { + gpmi: nand-controller@8000c000 { compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index a25da415cb02..878e89c20190 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -20,7 +20,7 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>; + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>; status = "okay"; flash: m25p32@1 { diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 563c1aae8c0c..c66f274ba4e9 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -74,8 +74,8 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, - <&gpio4 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>, + <&gpio4 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index 719ed5ca454a..f98691ae4415 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -104,7 +104,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>; status = "okay"; spidev@0 { diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index ec9fb8940ffa..9be44e807188 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -58,7 +58,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>; status = "okay"; zigbee: mc1323@0 { diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 9a6cb138adf3..7e7f9f3b3906 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -50,8 +50,8 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, - <&gpio3 24 0>, <&gpio3 25 0>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>, + <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -251,8 +251,8 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>, - <&gpio1 21 0>; + cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>, + <&gpio1 21 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index 289feab42b88..24859d0c09c1 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -119,7 +119,8 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>, + <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index 9e027b9a5f91..665d63765cdc 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -212,6 +212,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -383,7 +384,7 @@ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 >; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 809ca5611072..5c7e85300695 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -61,7 +61,7 @@ }; &ecspi2 { - cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index 9eb2b73951b2..b4a9523e325b 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -67,7 +67,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { @@ -80,7 +80,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; status = "okay"; tpm@0 { diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts index fa882458957b..5ac84445e9cc 100644 --- a/arch/arm/boot/dts/imx6dl-prtrvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts @@ -37,7 +37,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -52,7 +52,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index 306b4f7bf762..ae6da241f13e 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -219,7 +219,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi new file mode 100644 index 000000000000..e891ef9b0091 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-tqma6a.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi new file mode 100644 index 000000000000..38cd8501a886 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-tqma6b.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index c4a235d212b6..7d2c72562c73 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -8,6 +8,11 @@ #include <dt-bindings/pwm/pwm.h> / { + aliases: aliases { + ethernet1 = ð1; + ethernet2 = ð2; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; @@ -135,13 +140,13 @@ }; }; - port@2 { + eth2: port@2 { reg = <2>; label = "eth2"; phy-handle = <&phy_port2>; }; - port@3 { + eth1: port@3 { reg = <3>; label = "eth1"; phy-handle = <&phy_port3>; @@ -258,29 +263,35 @@ reg = <0x30>; clock-mode = /bits/ 8 <1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; - chan0 { + chan@0 { chan-name = "R"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <0>; }; - chan1 { + chan@1 { chan-name = "G"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <1>; }; - chan2 { + chan@2 { chan-name = "B"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <2>; }; - chan3 { + chan@3 { chan-name = "W"; led-cur = /bits/ 8 <0x0>; max-cur = /bits/ 8 <0x0>; + reg = <3>; }; }; @@ -311,7 +322,20 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - oled: oled@3d { + oled_1309: oled@3c { + compatible = "solomon,ssd1309fb-i2c"; + reg = <0x3c>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,segment-no-remap; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + oled_1305: oled@3d { compatible = "solomon,ssd1305fb-i2c"; reg = <0x3d>; solomon,height = <64>; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts index 6010d3d872ab..a19609c7c7c0 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts +++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts @@ -29,7 +29,11 @@ status = "okay"; }; -&oled { +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts new file mode 100644 index 000000000000..884b236746bb --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2020 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Orion i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&uart2 { + status = "disabled"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts index a1173bf5bff5..f6ae24efd4aa 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts +++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts @@ -17,6 +17,10 @@ }; }; +&aliases { + /delete-property/ ethernet1; +}; + &backlight { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 77b65a402e19..fdd81fdc3f35 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -88,10 +88,6 @@ }; aips1: bus@2000000 { - iomuxc: pinctrl@20e0000 { - compatible = "fsl,imx6dl-iomuxc"; - }; - pxp: pxp@20f0000 { reg = <0x020f0000 0x4000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; @@ -298,6 +294,10 @@ compatible = "fsl,imx6dl-hdmi"; }; +&iomuxc { + compatible = "fsl,imx6dl-iomuxc"; +}; + &ipu1_csi1 { ipu1_csi1_from_ipu1_csi1_mux: endpoint { remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index fb0980190aa0..604f2420370f 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -84,19 +84,19 @@ }; &pca9539 { - P04 { + P04-hog { gpio-hog; gpios = <4 0>; output-low; line-name = "PCA9539-P04"; }; - P07 { - gpio-hog; - gpios = <7 0>; - output-low; - line-name = "PCA9539-P07"; - }; + P07-hog { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "PCA9539-P07"; + }; }; &pci_root { diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 8f762d9c5ae9..56d2aeb1900c 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -84,12 +84,12 @@ }; &pca9539 { - P07 { - gpio-hog; - gpios = <7 0>; - output-low; - line-name = "PCA9539-P07"; - }; + P07-hog { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "PCA9539-P07"; + }; }; &usbphy1 { diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 1ea64ecf4291..3d6b757bf325 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -199,14 +199,14 @@ }; &pca9539 { - P10 { + P10-hog { gpio-hog; gpios = <8 0>; output-low; line-name = "PCA9539-P10"; }; - P11 { + P11-hog { gpio-hog; gpios = <9 0>; output-low; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index fc81f2f4b62d..e4578ed3371e 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -134,7 +134,7 @@ }; &ecspi1 { - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 1938b04199c4..2a98cc657595 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -102,10 +102,15 @@ #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch: switch@0 { compatible = "marvell,mv88e6085"; /* 88e6240*/ reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + switch_ports: ports { #address-cells = <1>; #size-cells = <0>; @@ -117,22 +122,32 @@ switchphy0: switchphy@0 { reg = <0>; + interrupt-parent = <&switch>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; switchphy1: switchphy@1 { reg = <1>; + interrupt-parent = <&switch>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; switchphy2: switchphy@2 { reg = <2>; + interrupt-parent = <&switch>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; switchphy3: switchphy@3 { reg = <3>; + interrupt-parent = <&switch>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; }; switchphy4: switchphy@4 { reg = <4>; + interrupt-parent = <&switch>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; }; }; }; @@ -140,7 +155,7 @@ }; &ecspi5 { - cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; @@ -233,42 +248,42 @@ interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - P12 { + P12-hog { gpio-hog; gpios = <10 0>; output-low; line-name = "PCA9539-P12"; }; - P13 { + P13-hog { gpio-hog; gpios = <11 0>; output-low; line-name = "PCA9539-P13"; }; - P14 { + P14-hog { gpio-hog; gpios = <12 0>; output-low; line-name = "PCA9539-P14"; }; - P15 { + P15-hog { gpio-hog; gpios = <13 0>; output-low; line-name = "PCA9539-P15"; }; - P16 { + P16-hog { gpio-hog; gpios = <14 0>; output-low; line-name = "PCA9539-P16"; }; - P17 { + P17-hog { gpio-hog; gpios = <15 0>; output-low; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index cab9e92531c7..bfb530f29d9d 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -255,7 +255,7 @@ }; &ecspi1 { - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index 87f0aa897086..236fc205c389 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -59,7 +59,7 @@ }; &ecspi1 { - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio4 11 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index f9df207b2778..fa2307d8ce86 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -99,7 +99,7 @@ &ecspi5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; - cs-gpios = <&gpio1 12 0>; + cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; flash: m25p80@0 { diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts index 57761f3172fa..48fb47e715f6 100644 --- a/arch/arm/boot/dts/imx6q-dms-ba16.dts +++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts @@ -42,7 +42,7 @@ }; &ecspi5 { - cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index b6e2b580051d..4cde45d5c90c 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -132,7 +132,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi index 2618eccfe50d..4d6a0c3e8455 100644 --- a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi @@ -14,10 +14,9 @@ /* Quad/Dual SoMs have 3 chip-select signals */ &ecspi4 { - fsl,spi-num-chipselects = <3>; - cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, - <&gpio3 29 GPIO_ACTIVE_HIGH>, - <&gpio3 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, + <&gpio3 29 GPIO_ACTIVE_LOW>, + <&gpio3 25 GPIO_ACTIVE_LOW>; }; &pinctrl_ecspi4 { diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts index 8f94364ba484..46a4ddedb423 100644 --- a/arch/arm/boot/dts/imx6q-logicpd.dts +++ b/arch/arm/boot/dts/imx6q-logicpd.dts @@ -9,7 +9,7 @@ / { model = "Logic PD i.MX6QD SOM-M3"; - compatible = "fsl,imx6q"; + compatible = "logicpd,imx6q-logicpd", "fsl,imx6q"; backlight: backlight-lvds { compatible = "pwm-backlight"; diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts index de6cbaab8b49..d112b50f8c5d 100644 --- a/arch/arm/boot/dts/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/imx6q-prti6q.dts @@ -158,7 +158,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -171,7 +171,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>; status = "okay"; @@ -195,7 +195,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/imx6q-tqma6a.dtsi new file mode 100644 index 000000000000..ab4c07c13a13 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tqma6a.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6q.dtsi" +#include "imx6qdl-tqma6a.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/imx6q-tqma6b.dtsi new file mode 100644 index 000000000000..7224c376c318 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tqma6b.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + */ + +#include "imx6q.dtsi" +#include "imx6qdl-tqma6b.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index a57c2e3a8435..63550351340d 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -144,8 +144,8 @@ }; &ecspi1 { - cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>, - <&gpio4 10 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, + <&gpio4 10 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 78a4d64929f3..5277e3903291 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -182,10 +182,6 @@ status = "disabled"; }; }; - - iomuxc: pinctrl@20e0000 { - compatible = "fsl,imx6q-iomuxc"; - }; }; sata: sata@2200000 { @@ -427,6 +423,10 @@ }; }; +&iomuxc { + compatible = "fsl,imx6q-iomuxc"; +}; + &ipu1_csi1 { ipu1_csi1_from_mipi_vc1: endpoint { remote-endpoint = <&mipi_vc1_to_ipu1_csi1>; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index dbdd7db60325..30fa349f9d05 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -127,7 +127,7 @@ /* Apalis SPI1 */ &ecspi1 { - cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "disabled"; @@ -135,7 +135,7 @@ /* Apalis SPI2 */ &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index d954661fa055..e21f6ac864e5 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -91,7 +91,7 @@ }; &ecspi4 { - cs-gpios = <&gpio3 20 0>; + cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index d38630d4b892..ead7ba27e105 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -110,23 +110,23 @@ }; &ecspi1 { - cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH - &gpio4 10 GPIO_ACTIVE_HIGH - &gpio4 11 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW + &gpio4 10 GPIO_ACTIVE_LOW + &gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; }; &ecspi4 { - cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 0930194fd960..4e2a309c93fa 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -94,7 +94,7 @@ /* Colibri SSP */ &ecspi4 { - cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index ebe7a8bddf04..648f5fcb72e6 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -30,7 +30,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 0>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi index 35e230f991f1..7228b894a763 100644 --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi @@ -168,8 +168,8 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, - <&gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, + <&gpio2 27 GPIO_ACTIVE_LOW>; }; &ecspi4 { diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 4d01c3300b97..3c04b5a4f3cb 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -152,7 +153,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index a46ea98228c2..736074f1c3ef 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -182,7 +183,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; @@ -217,7 +218,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a28e79463d0c..8072ed47c6bb 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -210,7 +211,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index b5f934b8a239..8c9bcdd39830 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/sound/fsl-imx-audmux.h> / { @@ -212,7 +213,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; @@ -247,7 +248,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 1516e2b0bcde..e5d803d023c8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -48,6 +48,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/media/tda1997x.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/sound/fsl-imx-audmux.h> / { @@ -219,7 +220,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 0da6e6f7482b..290a607fede9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -144,7 +145,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index db30de5d6490..c15b9cc63bf8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -64,8 +65,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; @@ -182,7 +181,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index d6b074597518..093a219a77ae 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -252,7 +253,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; @@ -294,7 +295,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index fbe6c32bd756..e1c8dd233cab 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { chosen { @@ -235,7 +236,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 23c6e4047621..3cd2e717c1da 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -257,7 +258,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi index b1ff7c859c4d..21c68a55bcb9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -154,7 +155,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index 11f84ee7b88f..ed4e22259959 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -134,7 +135,7 @@ &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; @@ -163,7 +164,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi index 0a1ffff9eb75..797f160249f7 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -129,7 +130,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; @@ -158,7 +159,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi index d62a8da49367..4cd7d290f5b2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -139,7 +140,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index e4231331f04e..eb1ad28946d3 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -203,7 +203,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>; - cs-gpios = <&gpio2 26 0>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 81c7ebb4b3fb..265f5f3dbff6 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -245,16 +245,16 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, - <&gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, + <&gpio2 27 GPIO_ACTIVE_LOW>; }; /* SPI0 */ &ecspi4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; - cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, - <&gpio3 29 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, + <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 185a1a31ca39..a0917823c244 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -316,7 +316,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 4bbe54e1ddb5..92d09a3ebe0e 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -247,7 +247,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index c63e1bc1ad3a..1243677b5f97 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -232,7 +232,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index bc43c75f1745..e361df26a168 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -71,7 +71,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - cs-gpios = <&gpio4 24 0>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; som_flash: flash@0 { compatible = "m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi index 39dfd90c2c6b..5de4ccb97916 100644 --- a/arch/arm/boot/dts/imx6qdl-pico.dtsi +++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi @@ -167,7 +167,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 55f736dbee0b..afe477f32984 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -267,7 +267,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; status = "disabled"; /* pin conflict with WEIM NOR */ diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 95f9ddab5996..fdc3aa9d544d 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -308,7 +308,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 68b3e68cb8df..f824c9abd11a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -105,9 +105,13 @@ "Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", "AMIC", "MICBIAS", - "IN3R", "AMIC"; + "IN3R", "AMIC", + "DMIC", "MICBIAS", + "DMICDAT", "DMIC"; mux-int-port = <2>; mux-ext-port = <3>; + hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>; + mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; }; backlight_lvds: backlight-lvds { @@ -185,7 +189,7 @@ }; &ecspi1 { - cs-gpios = <&gpio4 9 0>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi new file mode 100644 index 000000000000..b18b83ac6aee --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "supply-3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + + m25p80: flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + m25p,fast-read; + }; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */ + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099 + /* eCSPI1 SS1 */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +}; + +&pmic { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_vddcore: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_vddsoc: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_gen_3v3: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_ddr_1v5a: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_1v5b: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5v_600mA: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-always-on; + }; + + reg_snvs_3v: vsnvs { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1_1v5: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + /* not used */ + }; + + reg_vgen2_1v2_eth: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + reg_vgen3_2v8: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen4_1v8: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5_1v8_eth: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6_3v3: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vmmc-supply = <®_3p3v>; + non-removable; + disable-wp; + no-sd; + no-sdio; + bus-width = <8>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi new file mode 100644 index 000000000000..b679bec78e6c --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + }; + + sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "st,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi new file mode 100644 index 000000000000..49c472285c06 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + }; + + sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "st,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi index 267c956d8910..f88da757edda 100644 --- a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi @@ -95,7 +95,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -108,7 +108,7 @@ }; &ecspi2 { - cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi index f0be516dc28e..e6aa0c33754d 100644 --- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -165,7 +165,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -179,9 +179,9 @@ &ecspi2 { cs-gpios = < - &gpio5 31 GPIO_ACTIVE_HIGH - &gpio7 12 GPIO_ACTIVE_HIGH - &gpio5 18 GPIO_ACTIVE_HIGH + &gpio5 31 GPIO_ACTIVE_LOW + &gpio7 12 GPIO_ACTIVE_LOW + &gpio5 18 GPIO_ACTIVE_LOW >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 5af9ce977b12..66b15748e287 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -316,7 +316,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 43edbf1156c7..7a8837cbe21b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -159,7 +159,7 @@ clocks = <&clks IMX6QDL_CLK_APBH_DMA>; }; - gpmi: gpmi-nand@112000 { + gpmi: nand-controller@112000 { compatible = "fsl,imx6q-gpmi-nand"; reg = <0x00112000 0x2000>, <0x00114000 0x2000>; reg-names = "gpmi-nand", "bch"; @@ -1043,8 +1043,9 @@ <0 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>, <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp"; + clock-names = "ipg", "ahb", "ptp", "enet_out"; fsl,stop-mode = <&gpr 0x34 27>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts index 639d9dd35377..2bb3bfb18ec3 100644 --- a/arch/arm/boot/dts/imx6qp-sabreauto.dts +++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts @@ -47,7 +47,8 @@ }; &pcie { - status = "disabled"; + reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>; + status = "okay"; }; &sata { diff --git a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi new file mode 100644 index 000000000000..bb6ff7c64b27 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + */ + +#include "imx6q.dtsi" +#include "imx6qp.dtsi" +#include "imx6qdl-tqma6b.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index b1b069e723d2..25f6f2fb1555 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -94,6 +94,8 @@ sound { compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; model = "wm8962-audio"; ssi-controller = <&ssi2>; audio-codec = <&codec>; @@ -106,6 +108,7 @@ "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <3>; + hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; }; panel { @@ -129,7 +132,7 @@ }; &ecspi1 { - cs-gpios = <&gpio4 11 0>; + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -343,6 +346,12 @@ >; }; + pinctrl_hp: hpgrp { + fsl,pins = < + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts new file mode 100644 index 000000000000..caa279608803 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for the Tolino Shine 2 HD ebook reader + * + * Name on mainboard is: 37NB-E60QF0+4A2 or 37NB-E60QF0+4A3 + * Serials start with: E60QF2 + * + * Copyright 2020 Andreas Kemnade + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" + +/ { + model = "Tolino Shine 2 HD"; + compatible = "kobo,tolino-shine2hd", "fsl,imx6sl"; + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + cover { + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + + fl { + label = "Frontlight"; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BRIGHTNESS_CYCLE>; + }; + + home { + label = "Home"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + on { + label = "tolinoshine2hd:white:on"; + gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; + status = "okay"; + + /* TODO: embedded controller at 0x43 (driver missing) */ + +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; + clock-frequency = <100000>; + status = "okay"; + + zforce: touchscreen@50 { + compatible = "neonode,zforce"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_zforce>; + reg = <0x50>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo1_reg>; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + x-size = <1072>; + y-size = <1448>; + }; + + /* TODO: TPS65185 PMIC for E Ink at 0x68 */ + +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + ricoh619: pmic@32 { + compatible = "ricoh,rc5t619"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; + reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + + regulators { + dcdc1_reg: DCDC1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <900000>; + regulator-suspend-min-microvolt = <900000>; + }; + }; + + /* Core3_3V3 */ + dcdc2_reg: DCDC2 { + regulator-name = "DCDC2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3100000>; + regulator-suspend-min-microvolt = <3100000>; + }; + }; + + dcdc3_reg: DCDC3 { + regulator-name = "DCDC3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V2 */ + dcdc4_reg: DCDC4 { + regulator-name = "DCDC4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V8 */ + dcdc5_reg: DCDC5 { + regulator-name = "DCDC5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1700000>; + regulator-suspend-min-microvolt = <1700000>; + }; + }; + + /* IR_3V3 */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-boot-on; + }; + + /* Core1_3V3 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3000000>; + regulator-suspend-min-microvolt = <3000000>; + }; + }; + + /* Core5_1V2 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-boot-on; + }; + + /* SPD_3V3 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-always-on; + regulator-boot-on; + }; + + /* DDR_0V6 */ + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-always-on; + regulator-boot-on; + }; + + /* VDD_PWM */ + ldo7_reg: LDO7 { + regulator-name = "LDO7"; + regulator-always-on; + regulator-boot-on; + }; + + /* ldo_1v8 */ + ldo8_reg: LDO8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "LDO9"; + regulator-boot-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "LDO10"; + regulator-boot-on; + }; + + ldortc1_reg: LDORTC1 { + regulator-name = "LDORTC1"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 + MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x17059 + MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x17059 + MX6SL_PAD_KEY_ROW0__GPIO3_IO25 0x17059 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x79 + MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79 + MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x79 + MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x79 + MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79 + MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79 + MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79 + MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79 + MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79 + MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79 + MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79 + MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79 + MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79 + MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79 + MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79 + MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79 + MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79 + MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79 + MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79 + MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79 + MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79 + MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79 + MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79 + MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79 + MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79 + MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059 + >; + }; + + pinctrl_ricoh_gpio: ricoh_gpiogrp { + fsl,pins = < + MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */ + MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */ + MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2grp-sleep { + fsl,pins = < + MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9 + MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9 + MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9 + MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grp-sleep { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; + + pinctrl_zforce: zforcegrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x17059 /* TP_INT */ + MX6SL_PAD_SD1_DAT5__GPIO5_IO09 0x10059 /* TP_RST */ + >; + }; +}; + +®_vdd1p1 { + vin-supply = <&dcdc2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&dcdc2_reg>; +}; + +®_arm { + vin-supply = <&dcdc3_reg>; +}; + +®_soc { + vin-supply = <&dcdc1_reg>; +}; + +®_pu { + vin-supply = <&dcdc1_reg>; +}; + +&snvs_rtc { + /* + * We are using the RTC in the PMIC, but this one is not disabled + * in imx6sl.dtsi. + */ + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; + non-removable; + status = "okay"; + + /* internal uSD card */ +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; + + /* + * 37NB-E60QF0+4A2: CyberTan WC121 (BCM43362) SDIO WiFi + * 37NB-E60QF0+4A3: RTL8189F SDIO WiFi + */ +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 1c7180f28539..91a8c54d5e11 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -939,8 +939,10 @@ }; rngb: rngb@21b4000 { + compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb"; reg = <0x021b4000 0x4000>; interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_DUMMY>; }; weim: weim@21b8000 { diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index c755cbdb7cde..32b3d82fec53 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -132,6 +132,31 @@ }; }; }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; + model = "wm8962-audio"; + audio-cpu = <&ssi2>; + audio-codec = <&wm8962>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; }; &cpu0 { @@ -247,6 +272,27 @@ }; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + }; +}; + &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd>; @@ -274,6 +320,10 @@ status = "okay"; }; +&ssi2 { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -330,6 +380,22 @@ }; &iomuxc { + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + >; + }; + + pinctrl_hp: hpgrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */ + >; + }; + pinctrl_reg_sd3_vmmc: sd3vmmcgrp { fsl,pins = < MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 @@ -449,6 +515,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1 + MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1 + >; + }; + pinctrl_lcd: lcdgrp { fsl,pins = < MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index fb5d3bc50c6b..0b622201a1f3 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -786,6 +786,13 @@ clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>; }; + rngb: rng@21b4000 { + compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb"; + reg = <0x021b4000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>; + }; + ocotp: efuse@21bc000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index b8c23eba9dc7..1351d7f70a54 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -153,6 +153,8 @@ sound { compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; model = "wm8962-audio"; ssi-controller = <&ssi2>; audio-codec = <&codec>; @@ -165,6 +167,7 @@ "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <6>; + hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>; }; panel { @@ -468,6 +471,12 @@ >; }; + pinctrl_hp: hpgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index d25e27d0315f..5547916870c7 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -93,7 +93,7 @@ &ecspi4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; - cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index b480dfa9e251..dfdca1804f9f 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -213,7 +213,7 @@ clocks = <&clks IMX6SX_CLK_APBH_DMA>; }; - gpmi: gpmi-nand@1806000{ + gpmi: nand-controller@1806000{ compatible = "fsl,imx6sx-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi index a35be2a369b3..770f59b23102 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -84,7 +84,7 @@ }; &ecspi1 { - cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi index 61ba21a605a8..2a449a3c1ae2 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -14,7 +14,7 @@ }; &ecspi2 { - cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi index 8d5f8dc6ad58..f1513e676c2f 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi @@ -106,7 +106,7 @@ &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 2b088f210331..d7d9f3e46b92 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -174,7 +174,7 @@ clocks = <&clks IMX6UL_CLK_APBHDMA>; }; - gpmi: gpmi-nand@1806000 { + gpmi: nand-controller@1806000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 6cf95939121d..4436556624d6 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -68,7 +68,7 @@ /* Colibri SPI */ &ecspi1 { - cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; }; diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index fcde7f77ae42..9bf67490ac49 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -68,6 +68,13 @@ clock-names = "dcp"; }; + rngb: rng@2284000 { + compatible = "fsl,imx6ull-rngb", "fsl,imx25-rngb"; + reg = <0x02284000 0x4000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>; + }; + iomuxc_snvs: iomuxc-snvs@2290000 { compatible = "fsl,imx6ull-iomuxc-snvs"; reg = <0x02290000 0x4000>; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index e18e89dec879..62b771c1d5a9 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -60,7 +60,7 @@ &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>; - cs-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; }; &fec1 { diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 17cca8a9f77b..ac0751bc1177 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -146,6 +146,24 @@ }; }; }; + + sound { + compatible = "fsl,imx7d-evk-wm8960", + "fsl,imx-audio-wm8960"; + model = "wm8960-audio"; + audio-cpu = <&sai1>; + audio-codec = <&codec>; + hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "AMIC", + "AMIC", "MICB"; + }; }; &adc1 { @@ -169,7 +187,7 @@ &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; tsc2046@0 { @@ -363,6 +381,13 @@ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; clock-names = "mclk"; wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <12288000>; }; }; @@ -391,6 +416,28 @@ vin-supply = <&sw2_reg>; }; +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <36864000>; + status = "okay"; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>; + assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_SAI3_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <36864000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -550,6 +597,7 @@ pinctrl_hog: hoggrp { fsl,pins = < MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */ >; }; @@ -615,6 +663,33 @@ >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f + MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f + MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 + MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f + MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f + MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 + >; + }; + pinctrl_spi4: spi4grp { fsl,pins = < MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 @@ -776,4 +851,10 @@ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 >; }; + + pinctrl_sai3_mclk: sai3grp_mclk { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x1f + >; + }; }; diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts index 7cb6153fc650..1065941807e8 100644 --- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -39,7 +39,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index cbf0dbb4c198..893bd30aa2a3 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -193,7 +193,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 1cfaf410aa43..84d9cc13afb9 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1162,6 +1162,19 @@ status = "disabled"; }; + qspi: spi@30bb0000 { + compatible = "fsl,imx7d-qspi"; + reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_QSPI_ROOT_CLK>, + <&clks IMX7D_QSPI_ROOT_CLK>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + sdma: sdma@30bd0000 { compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; reg = <0x30bd0000 0x10000>; @@ -1208,7 +1221,7 @@ clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; }; - gpmi: gpmi-nand@33002000{ + gpmi: nand-controller@33002000{ compatible = "fsl,imx7d-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index 395e05f10d36..7d0468a23781 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -79,7 +79,7 @@ }; &dss { - status = "ok"; + status = "okay"; vdds_dsi-supply = <&vpll2>; vdda_video-supply = <&video_reg>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index b0f6613e6d54..533a47bc4a53 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -115,7 +115,7 @@ }; &dss { - status = "ok"; + status = "okay"; vdds_dsi-supply = <&vpll2>; vdda_video-supply = <&vpll2>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index eadb0832bcfc..7649dd1e0b9e 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -11,13 +11,6 @@ #size-cells = <1>; interrupt-parent = <&gic>; - L2: cache-controller@c4200000 { - compatible = "arm,pl310-cache"; - reg = <0xc4200000 0x1000>; - cache-unified; - cache-level = <2>; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -172,6 +165,13 @@ }; }; + L2: cache-controller@c4200000 { + compatible = "arm,pl310-cache"; + reg = <0xc4200000 0x1000>; + cache-unified; + cache-level = <2>; + }; + periph: bus@c4300000 { compatible = "simple-bus"; reg = <0xc4300000 0x10000>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 277c0bb10453..04688e8abce2 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -240,8 +240,6 @@ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 1990239cc6af..d5ded4f794df 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -207,8 +207,9 @@ }; }; - lcd0: display { - compatible = "panel-dsi-cm"; + lcd0: panel@0 { + compatible = "motorola,droid4-panel", "panel-dsi-cm"; + reg = <0>; label = "lcd0"; vddi-supply = <&lcd_regulator>; reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ @@ -217,6 +218,7 @@ width-mm = <50>; height-mm = <89>; + rotation = <90>; panel-timing { clock-frequency = <0>; /* Calculated by dsi */ diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index a5c91c240db9..005c2758e229 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -11,7 +11,7 @@ model = "Phontech MPA 1600"; compatible = "phontech,mpa1600", "atmel,at91rm9200"; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi index 96fb5a5cf4d3..37f5023f529c 100644 --- a/arch/arm/boot/dts/mps2.dtsi +++ b/arch/arm/boot/dts/mps2.dtsi @@ -161,9 +161,11 @@ }; timer2: dual-timer@2000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x2000 0x1000>; - clocks = <&sysclk>; + clocks = <&sysclk>, <&sysclk>, <&sysclk>; + clock-names = "timer0clk", "timer1clk", + "apb_pclk"; interrupts = <10>; status = "disabled"; }; @@ -197,8 +199,8 @@ arm,primecell-periphid = <0x00141805>; reg = <0x8000 0x1000>; interrupts = <0>; - clocks = <&sysclk>; - clock-names = "apb_pclk"; + clocks = <&sysclk>, <&sysclk>; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts index f24c5580d3e4..f9db2ff86f2d 100644 --- a/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts +++ b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts @@ -5,7 +5,7 @@ */ /dts-v1/; -#include "infinity-msc313.dtsi" +#include "mstar-infinity-msc313.dtsi" / { model = "BreadBee Crust"; diff --git a/arch/arm/boot/dts/infinity-msc313.dtsi b/arch/arm/boot/dts/mstar-infinity-msc313.dtsi index 42f2b5552c77..3499fde263be 100644 --- a/arch/arm/boot/dts/infinity-msc313.dtsi +++ b/arch/arm/boot/dts/mstar-infinity-msc313.dtsi @@ -4,7 +4,7 @@ * Author: Daniel Palmer <daniel@thingy.jp> */ -#include "infinity.dtsi" +#include "mstar-infinity.dtsi" / { memory@20000000 { diff --git a/arch/arm/boot/dts/infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi index cd911adef014..cd911adef014 100644 --- a/arch/arm/boot/dts/infinity.dtsi +++ b/arch/arm/boot/dts/mstar-infinity.dtsi diff --git a/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts index 1f93401c8530..f0eda80a95cc 100644 --- a/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts +++ b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts @@ -5,7 +5,7 @@ */ /dts-v1/; -#include "infinity3-msc313e.dtsi" +#include "mstar-infinity3-msc313e.dtsi" / { model = "BreadBee"; diff --git a/arch/arm/boot/dts/infinity3-msc313e.dtsi b/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi index 4e7239afd823..f581b6f89555 100644 --- a/arch/arm/boot/dts/infinity3-msc313e.dtsi +++ b/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi @@ -4,7 +4,7 @@ * Author: Daniel Palmer <daniel@thingy.jp> */ -#include "infinity3.dtsi" +#include "mstar-infinity3.dtsi" / { memory@20000000 { diff --git a/arch/arm/boot/dts/infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi index 9b918c802654..9857e2a9934d 100644 --- a/arch/arm/boot/dts/infinity3.dtsi +++ b/arch/arm/boot/dts/mstar-infinity3.dtsi @@ -4,7 +4,7 @@ * Author: Daniel Palmer <daniel@thingy.jp> */ -#include "infinity.dtsi" +#include "mstar-infinity.dtsi" &imi { reg = <0xa0000000 0x20000>; diff --git a/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts b/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts index f24bd8cb8e60..7306b737d9c4 100644 --- a/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts +++ b/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts @@ -5,7 +5,7 @@ */ /dts-v1/; -#include "mercury5-ssc8336n.dtsi" +#include "mstar-mercury5-ssc8336n.dtsi" / { model = "70mai Midrive D08"; diff --git a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi index 7d4a4630c25c..3f5a4c029744 100644 --- a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi +++ b/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi @@ -4,7 +4,7 @@ * Author: Daniel Palmer <daniel@thingy.jp> */ -#include "mercury5.dtsi" +#include "mstar-mercury5.dtsi" / { memory@20000000 { diff --git a/arch/arm/boot/dts/mercury5.dtsi b/arch/arm/boot/dts/mstar-mercury5.dtsi index a7d0dd9d6132..a7d0dd9d6132 100644 --- a/arch/arm/boot/dts/mercury5.dtsi +++ b/arch/arm/boot/dts/mstar-mercury5.dtsi diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi index 3b7b9b793736..f07880561e11 100644 --- a/arch/arm/boot/dts/mstar-v7.dtsi +++ b/arch/arm/boot/dts/mstar-v7.dtsi @@ -85,6 +85,25 @@ mask = <0x79>; }; + intc_fiq: interrupt-controller@201310 { + compatible = "mstar,mst-intc"; + reg = <0x201310 0x40>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&gic>; + mstar,irqs-map-range = <96 127>; + }; + + intc_irq: interrupt-controller@201350 { + compatible = "mstar,mst-intc"; + reg = <0x201350 0x40>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&gic>; + mstar,irqs-map-range = <32 95>; + mstar,intc-no-eoi; + }; + l3bridge: l3bridge@204400 { compatible = "mstar,l3bridge"; reg = <0x204400 0x200>; @@ -94,6 +113,7 @@ compatible = "ns16550a"; reg = <0x221000 0x100>; reg-shift = <3>; + interrupts-extended = <&intc_irq GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <172000000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 39b3a2f4bef4..fade14284017 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -569,6 +569,19 @@ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; + jpegenc: jpegenc@1500a000 { + compatible = "mediatek,mt2701-jpgenc", + "mediatek,mtk-jpgenc"; + reg = <0 0x1500a000 0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_VENC>; + clock-names = "jpgenc"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, + <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; + }; + vdecsys: syscon@16000000 { compatible = "mediatek,mt2701-vdecsys", "syscon"; reg = <0 0x16000000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 3a6b856e5b74..aea6809500d7 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -14,7 +14,6 @@ #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/phy/phy.h> -#include <dt-bindings/memory/mt2701-larb-port.h> #include <dt-bindings/reset/mt2701-resets.h> #include <dt-bindings/thermal/thermal.h> @@ -297,17 +296,6 @@ clock-names = "system-clk", "rtc-clk"; }; - smi_common: smi@1000c000 { - compatible = "mediatek,mt7623-smi-common", - "mediatek,mt2701-smi-common"; - reg = <0 0x1000c000 0 0x1000>; - clocks = <&infracfg CLK_INFRA_SMI>, - <&mmsys CLK_MM_SMI_COMMON>, - <&infracfg CLK_INFRA_SMI>; - clock-names = "apb", "smi", "async"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; - }; - pwrap: pwrap@1000d000 { compatible = "mediatek,mt7623-pwrap", "mediatek,mt2701-pwrap"; @@ -339,17 +327,6 @@ reg = <0 0x10200100 0 0x1c>; }; - iommu: mmsys_iommu@10205000 { - compatible = "mediatek,mt7623-m4u", - "mediatek,mt2701-m4u"; - reg = <0 0x10205000 0 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_M4U>; - clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2>; - #iommu-cells = <1>; - }; - efuse: efuse@10206000 { compatible = "mediatek,mt7623-efuse", "mediatek,mt8173-efuse"; @@ -725,94 +702,6 @@ status = "disabled"; }; - g3dsys: syscon@13000000 { - compatible = "mediatek,mt7623-g3dsys", - "mediatek,mt2701-g3dsys", - "syscon"; - reg = <0 0x13000000 0 0x200>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - mali: gpu@13040000 { - compatible = "mediatek,mt7623-mali", "arm,mali-450"; - reg = <0 0x13040000 0 0x30000>; - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", - "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3", - "pp"; - clocks = <&topckgen CLK_TOP_MMPLL>, - <&g3dsys CLK_G3DSYS_CORE>; - clock-names = "bus", "core"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>; - resets = <&g3dsys MT2701_G3DSYS_CORE_RST>; - }; - - mmsys: syscon@14000000 { - compatible = "mediatek,mt7623-mmsys", - "mediatek,mt2701-mmsys", - "syscon"; - reg = <0 0x14000000 0 0x1000>; - #clock-cells = <1>; - }; - - larb0: larb@14010000 { - compatible = "mediatek,mt7623-smi-larb", - "mediatek,mt2701-smi-larb"; - reg = <0 0x14010000 0 0x1000>; - mediatek,smi = <&smi_common>; - mediatek,larb-id = <0>; - clocks = <&mmsys CLK_MM_SMI_LARB0>, - <&mmsys CLK_MM_SMI_LARB0>; - clock-names = "apb", "smi"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; - }; - - imgsys: syscon@15000000 { - compatible = "mediatek,mt7623-imgsys", - "mediatek,mt2701-imgsys", - "syscon"; - reg = <0 0x15000000 0 0x1000>; - #clock-cells = <1>; - }; - - larb2: larb@15001000 { - compatible = "mediatek,mt7623-smi-larb", - "mediatek,mt2701-smi-larb"; - reg = <0 0x15001000 0 0x1000>; - mediatek,smi = <&smi_common>; - mediatek,larb-id = <2>; - clocks = <&imgsys CLK_IMG_SMI_COMM>, - <&imgsys CLK_IMG_SMI_COMM>; - clock-names = "apb", "smi"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - }; - - jpegdec: jpegdec@15004000 { - compatible = "mediatek,mt7623-jpgdec", - "mediatek,mt2701-jpgdec"; - reg = <0 0x15004000 0 0x1000>; - interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; - clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, - <&imgsys CLK_IMG_JPGDEC>; - clock-names = "jpgdec-smi", - "jpgdec"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; - iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, - <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; - }; - vdecsys: syscon@16000000 { compatible = "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", @@ -821,18 +710,6 @@ #clock-cells = <1>; }; - larb1: larb@16010000 { - compatible = "mediatek,mt7623-smi-larb", - "mediatek,mt2701-smi-larb"; - reg = <0 0x16010000 0 0x1000>; - mediatek,smi = <&smi_common>; - mediatek,larb-id = <1>; - clocks = <&vdecsys CLK_VDEC_CKGEN>, - <&vdecsys CLK_VDEC_LARB>; - clock-names = "apb", "smi"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; - }; - hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 2b760f90f38c..e96aa0ed1ebd 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -6,7 +6,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> -#include "mt7623.dtsi" +#include "mt7623n.dtsi" #include "mt6323.dtsi" / { @@ -21,6 +21,19 @@ stdout-path = "serial2:115200n8"; }; + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "d"; + ddc-i2c-bus = <&hdmiddc0>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; + cpus { cpu@0 { proc-supply = <&mt6323_vproc_reg>; @@ -66,6 +79,13 @@ regulator-always-on; }; + reg_vgpu: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_fixed_vgpu"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -114,10 +134,18 @@ }; }; +&bls { + status = "okay"; +}; + &btif { status = "okay"; }; +&cec { + status = "okay"; +}; + &cir { pinctrl-names = "default"; pinctrl-0 = <&cir_pins_a>; @@ -128,6 +156,21 @@ status = "okay"; }; +&dpi0 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dpi0_out: endpoint { + remote-endpoint = <&hdmi0_in>; + }; + }; + }; +}; + ð { status = "okay"; @@ -192,6 +235,7 @@ fixed-link { speed = <1000>; full-duplex; + pause; }; }; }; @@ -199,6 +243,42 @@ }; }; +&hdmi0 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins_a>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmiddc0 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ddc_pins_a>; + status = "okay"; +}; + +&hdmi_phy { + mediatek,ibias = <0xa>; + mediatek,ibias_up = <0x1c>; + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -211,6 +291,11 @@ status = "okay"; }; +&mali { + mali-supply = <®_vgpu>; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default", "state_uhs"; pinctrl-0 = <&mmc0_pins_default>; @@ -330,4 +415,3 @@ &u3phy2 { status = "okay"; }; - diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts index 0447748f9fa0..1b9b9a8145a7 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts @@ -7,7 +7,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> -#include "mt7623.dtsi" +#include "mt7623n.dtsi" #include "mt6323.dtsi" / { @@ -24,6 +24,19 @@ stdout-path = "serial2:115200n8"; }; + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "d"; + ddc-i2c-bus = <&hdmiddc0>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; + cpus { cpu@0 { proc-supply = <&mt6323_vproc_reg>; @@ -106,10 +119,18 @@ }; }; +&bls { + status = "okay"; +}; + &btif { status = "okay"; }; +&cec { + status = "okay"; +}; + &cir { pinctrl-names = "default"; pinctrl-0 = <&cir_pins_a>; @@ -120,6 +141,21 @@ status = "okay"; }; +&dpi0 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dpi0_out: endpoint { + remote-endpoint = <&hdmi0_in>; + }; + }; + }; +}; + ð { status = "okay"; @@ -203,6 +239,42 @@ }; }; +&hdmi0 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins_a>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmiddc0 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ddc_pins_a>; + status = "okay"; +}; + +&hdmi_phy { + mediatek,ibias = <0xa>; + mediatek,ibias_up = <0x1c>; + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi new file mode 100644 index 000000000000..1880ac9e32cf --- /dev/null +++ b/arch/arm/boot/dts/mt7623n.dtsi @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright © 2017-2020 MediaTek Inc. + * Author: Sean Wang <sean.wang@mediatek.com> + * Ryder Lee <ryder.lee@mediatek.com> + * + */ + +#include "mt7623.dtsi" +#include <dt-bindings/memory/mt2701-larb-port.h> + +/ { + aliases { + rdma0 = &rdma0; + rdma1 = &rdma1; + }; + + g3dsys: syscon@13000000 { + compatible = "mediatek,mt7623-g3dsys", + "mediatek,mt2701-g3dsys", + "syscon"; + reg = <0 0x13000000 0 0x200>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mali: gpu@13040000 { + compatible = "mediatek,mt7623-mali", "arm,mali-450"; + reg = <0 0x13040000 0 0x30000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", + "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3", + "pp"; + clocks = <&topckgen CLK_TOP_MMPLL>, + <&g3dsys CLK_G3DSYS_CORE>; + clock-names = "bus", "core"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>; + resets = <&g3dsys MT2701_G3DSYS_CORE_RST>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt7623-mmsys", + "mediatek,mt2701-mmsys", + "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb0: larb@14010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x14010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <0>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + larb1: larb@16010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <1>; + clocks = <&vdecsys CLK_VDEC_CKGEN>, + <&vdecsys CLK_VDEC_LARB>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <2>; + clocks = <&imgsys CLK_IMG_SMI_COMM>, + <&imgsys CLK_IMG_SMI_COMM>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt7623-imgsys", + "mediatek,mt2701-imgsys", + "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + iommu: mmsys_iommu@10205000 { + compatible = "mediatek,mt7623-m4u", + "mediatek,mt2701-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2>; + #iommu-cells = <1>; + }; + + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt7623-jpgdec", + "mediatek,mt2701-jpgdec"; + reg = <0 0x15004000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + }; + + smi_common: smi@1000c000 { + compatible = "mediatek,mt7623-smi-common", + "mediatek,mt2701-smi-common"; + reg = <0 0x1000c000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_SMI>, + <&mmsys CLK_MM_SMI_COMMON>, + <&infracfg CLK_INFRA_SMI>; + clock-names = "apb", "smi", "async"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + ovl: ovl@14007000 { + compatible = "mediatek,mt7623-disp-ovl", + "mediatek,mt2701-disp-ovl"; + reg = <0 0x14007000 0 0x1000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_OVL>; + iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>; + mediatek,larb = <&larb0>; + }; + + rdma0: rdma@14008000 { + compatible = "mediatek,mt7623-disp-rdma", + "mediatek,mt2701-disp-rdma"; + reg = <0 0x14008000 0 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_RDMA>; + iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>; + mediatek,larb = <&larb0>; + }; + + wdma@14009000 { + compatible = "mediatek,mt7623-disp-wdma", + "mediatek,mt2701-disp-wdma"; + reg = <0 0x14009000 0 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_WDMA>; + iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>; + mediatek,larb = <&larb0>; + }; + + bls: pwm@1400a000 { + compatible = "mediatek,mt7623-disp-pwm", + "mediatek,mt2701-disp-pwm"; + reg = <0 0x1400a000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_MDP_BLS_26M>, + <&mmsys CLK_MM_DISP_BLS>; + clock-names = "main", "mm"; + status = "disabled"; + }; + + color: color@1400b000 { + compatible = "mediatek,mt7623-disp-color", + "mediatek,mt2701-disp-color"; + reg = <0 0x1400b000 0 0x1000>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_COLOR>; + }; + + dsi: dsi@1400c000 { + compatible = "mediatek,mt7623-dsi", + "mediatek,mt2701-dsi"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DSI_ENGINE>, + <&mmsys CLK_MM_DSI_DIG>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + status = "disabled"; + }; + + mutex: mutex@1400e000 { + compatible = "mediatek,mt7623-disp-mutex", + "mediatek,mt2701-disp-mutex"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_MUTEX_32K>; + }; + + rdma1: rdma@14012000 { + compatible = "mediatek,mt7623-disp-rdma", + "mediatek,mt2701-disp-rdma"; + reg = <0 0x14012000 0 0x1000>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_RDMA1>; + iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>; + mediatek,larb = <&larb0>; + }; + + dpi0: dpi@14014000 { + compatible = "mediatek,mt7623-dpi", + "mediatek,mt2701-dpi"; + reg = <0 0x14014000 0 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DPI1_DIGL>, + <&mmsys CLK_MM_DPI1_ENGINE>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + status = "disabled"; + }; + + hdmi0: hdmi@14015000 { + compatible = "mediatek,mt7623-hdmi", + "mediatek,mt2701-hdmi"; + reg = <0 0x14015000 0 0x400>; + clocks = <&mmsys CLK_MM_HDMI_PIXEL>, + <&mmsys CLK_MM_HDMI_PLL>, + <&mmsys CLK_MM_HDMI_AUDIO>, + <&mmsys CLK_MM_HDMI_SPDIF>; + clock-names = "pixel", "pll", "bclk", "spdif"; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + mediatek,syscon-hdmi = <&mmsys 0x900>; + cec = <&cec>; + status = "disabled"; + }; + + mipi_tx0: mipi-dphy@10010000 { + compatible = "mediatek,mt7623-mipi-tx", + "mediatek,mt2701-mipi-tx"; + reg = <0 0x10010000 0 0x90>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + }; + + cec: cec@10012000 { + compatible = "mediatek,mt7623-cec", + "mediatek,mt8173-cec"; + reg = <0 0x10012000 0 0xbc>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CEC>; + status = "disabled"; + }; + + hdmi_phy: phy@10209100 { + compatible = "mediatek,mt7623-hdmi-phy", + "mediatek,mt2701-hdmi-phy"; + reg = <0 0x10209100 0 0x24>; + clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; + clock-names = "pll_ref"; + clock-output-names = "hdmitx_dig_cts"; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + + hdmiddc0: i2c@11013000 { + compatible = "mediatek,mt7623-hdmi-ddc", + "mediatek,mt8173-hdmi-ddc"; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + reg = <0 0x11013000 0 0x1C>; + clocks = <&pericfg CLK_PERI_I2C3>; + clock-names = "ddc-i2c"; + status = "disabled"; + }; +}; + +&pio { + hdmi_pins_a: hdmi-default { + pins-hdmi { + pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>; + input-enable; + bias-pull-down; + }; + }; + + hdmi_ddc_pins_a: hdmi_ddc-default { + pins-hdmi-ddc { + pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>, + <MT7623_PIN_125_GPIO125_FUNC_HDMISD>; + }; + }; +}; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index d9a0fd7524dc..90e033d9141f 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -145,15 +145,19 @@ timer0: timer@900C0000 { reg = <0x900C0000 0x1000>; - - clocks = <&timer_clk>; + clocks = <&timer_clk>, <&timer_clk>, + <&timer_clk>; + clock-names = "timer0clk", "timer1clk", + "apb_pclk"; }; timer1: timer@900D0000 { reg = <0x900D0000 0x1000>; interrupts = <19>; - - clocks = <&timer_clk>; + clocks = <&timer_clk>, <&timer_clk>, + <&timer_clk>; + clock-names = "timer0clk", "timer1clk", + "apb_pclk"; }; watchdog: watchdog@90060000 { diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 05077f3c75cd..252507cf300b 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -389,7 +389,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = < @@ -406,7 +406,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 79bc710c05fc..f9f34b8458e9 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -386,7 +386,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; @@ -400,7 +400,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; @@ -413,7 +413,7 @@ }; &gpmc { - status = "ok"; + status = "okay"; ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */ /* Chip select 0 */ diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 632f52efdf98..3b8349094baa 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -147,7 +147,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts index 32dbaeaed147..bc545ee23e71 100644 --- a/arch/arm/boot/dts/omap3-cm-t3530.dts +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts @@ -49,7 +49,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 683819bf0915..48e48b0c8190 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -87,7 +87,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index cdb632df152a..e61b8a2bfb7d 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -246,7 +246,7 @@ }; &venc { - status = "ok"; + status = "okay"; port { venc_out: endpoint { @@ -257,7 +257,7 @@ }; &mcbsp2 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi index aee46fa8c055..1ed837859374 100644 --- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi @@ -17,4 +17,25 @@ cpu_thermal: cpu_thermal { /* sensor ID */ thermal-sensors = <&bandgap 0>; + + cpu_trips: trips { + cpu_alert0: cpu_alert { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index ac3d996cec5c..2c19d6e255bd 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -337,7 +337,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; @@ -361,7 +361,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index ecc45862b4f3..c8745bc800f7 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -822,27 +822,27 @@ }; &mcbsp1 { /* FM Transceiver PCM */ - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_pins>; }; &mcbsp2 { /* TPS65950 I2S */ - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; }; &mcbsp3 { /* Bluetooth PCM */ - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp3_pins>; }; &mcbsp4 { /* GSM voice PCM */ - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp4_pins>; diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index b3f7f9966c3c..643283f0c3db 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -100,7 +100,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 91caa50b74c4..af8aa5f0feb7 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -245,7 +245,7 @@ }; &dss { - status = "ok"; + status = "okay"; port { dpi_out: endpoint { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 2495a696cec6..d211bcc31174 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -23,7 +23,6 @@ vana-supply = <&vaux3>; clocks = <&isp 0>; clock-frequency = <9600000>; - nokia,nvm-size = <(16 * 64)>; flash-leds = <&as3645a_flash &as3645a_indicator>; port { smia_1_1: endpoint { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index bc24e3dc7cda..32335d4ce478 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -1083,7 +1083,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_sdi_pins>; @@ -1106,7 +1106,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; @@ -1119,7 +1119,7 @@ }; &mcbsp2 { - status = "ok"; + status = "okay"; }; &ssi_port1 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 31d47a1fad84..b2f480022ff6 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -76,7 +76,6 @@ vana-supply = <&vaux3>; clocks = <&isp 0>; clock-frequency = <9600000>; - nokia,nvm-size = <(16 * 64)>; flash-leds = <&as3645a_flash &as3645a_indicator>; port { smia_1_1: endpoint { @@ -205,13 +204,13 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&vdac>; }; &dsi { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dsi_pins>; @@ -225,8 +224,9 @@ }; }; - lcd0: display { + lcd0: panel@0 { compatible = "nokia,himalaya", "panel-dsi-cm"; + reg = <0>; label = "lcd0"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi index c9e62e414abb..339a51fa4119 100644 --- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi @@ -48,7 +48,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 185ce53de0ec..1d6e88f99eb3 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -76,7 +76,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7fe0f9148232..7e30f9d45790 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -75,7 +75,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 150d5be42d27..37608af6c07f 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -702,7 +702,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; @@ -718,7 +718,7 @@ pinctrl-names = "default"; pinctrl-0 = < &dss_dpi_pins >; - status = "ok"; + status = "okay"; vdds_dsi-supply = <&vpll2>; port { diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi index b8b9fcc41ef1..2dbb687d4df2 100644 --- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi +++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -46,7 +46,7 @@ }; &dss { - status = "ok"; + status = "okay"; port { dpi_out: endpoint { remote-endpoint = <&lcd_in>; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index f7930f198ce5..d82cab8e213a 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -64,7 +64,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index cf22a7e1c63c..9dcae1f2bc99 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -941,6 +941,9 @@ ti,hwmods = "dss_dsi1"; clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; rfbi: encoder@48050800 { diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 9c3ee4ac8165..feaa43b78535 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -20,6 +20,7 @@ operating-points-v2 = <&cpu0_opp_table>; clock-latency = <300000>; /* From legacy driver */ + #cooling-cells = <2>; }; }; @@ -182,7 +183,7 @@ }; &ssi { - status = "ok"; + status = "okay"; clocks = <&ssi_ssr_fck>, <&ssi_sst_fck>, diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 9c3beefc0fe0..05fe5ed127b0 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -25,6 +25,7 @@ vbb-supply = <&abb_mpu_iva>; clock-latency = <300000>; /* From omap-cpufreq driver */ + #cooling-cells = <2>; }; }; @@ -234,7 +235,7 @@ }; &ssi { - status = "ok"; + status = "okay"; clocks = <&ssi_ssr_fck>, <&ssi_sst_fck>, diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 4548d87534e3..b294c22177cb 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -171,11 +171,11 @@ }; &dss { - status = "ok"; + status = "okay"; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 3e78caefa2b8..609a8dea946b 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -566,7 +566,7 @@ }; &dss { - status = "ok"; + status = "okay"; port { dpi_out: endpoint { @@ -577,12 +577,12 @@ }; &dsi2 { - status = "ok"; + status = "okay"; vdd-supply = <&vcxio>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; port { diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 79e7a41ecb7e..afb49a2d6963 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -648,11 +648,11 @@ }; &dss { - status = "ok"; + status = "okay"; }; &dsi1 { - status = "ok"; + status = "okay"; vdd-supply = <&vcxio>; port { @@ -662,8 +662,9 @@ }; }; - lcd0: display { + lcd0: panel@0 { compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; label = "lcd0"; reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ @@ -677,7 +678,7 @@ }; &dsi2 { - status = "ok"; + status = "okay"; vdd-supply = <&vcxio>; port { @@ -687,8 +688,9 @@ }; }; - lcd1: display { + lcd1: panel@0 { compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; label = "lcd1"; reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ @@ -702,7 +704,7 @@ }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; port { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index eb5780eb2630..d6475cc6a91a 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -410,7 +410,7 @@ status = "disabled"; }; - target-module@56000000 { + sgx_module: target-module@56000000 { compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x5600fe00 0x4>, <0x5600fe10 0x4>; @@ -572,6 +572,9 @@ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; }; @@ -604,6 +607,9 @@ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index 8ed510ab00c5..cb309743de5d 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -74,3 +74,13 @@ }; /include/ "omap443x-clocks.dtsi" + +/* + * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel + */ +&sgx_module { + assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>, + <&dpll_per_m7x2_ck>; + assigned-clock-rates = <0>, <153600000>; + assigned-clock-parents = <&dpll_per_m7x2_ck>; +}; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index edf1906016c8..d8f13626cfd1 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -743,11 +743,11 @@ }; &dss { - status = "ok"; + status = "okay"; }; &hdmi { - status = "ok"; + status = "okay"; /* vdda-supply populated in board specific dts file */ diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index e78d3718f145..ca759b7b8a58 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -653,7 +653,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; @@ -677,12 +677,12 @@ }; &dsi2 { - status = "ok"; + status = "okay"; vdd-supply = <&ldo4_reg>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo4_reg>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts new file mode 100644 index 000000000000..c92f8bdcb331 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Caninos Labrador Base Board + * + * Copyright (c) 2019-2020 Matheus Castello + */ + +/dts-v1/; + +#include "owl-s500-labrador-v2.dtsi" + +/ { + model = "Caninos Labrador Core v2 on Labrador Base-M v1"; + compatible = "caninos,labrador-base-m", + "caninos,labrador-v2", "actions,s500"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + uart3_clk: uart3-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&uart3 { + status = "okay"; + clocks = <&uart3_clk>; +}; diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi new file mode 100644 index 000000000000..883ff2f9886d --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Caninos Labrador SoM V2 + * + * Copyright (c) 2019-2020 Matheus Castello + */ + +#include "owl-s500.dtsi" + +/ { + model = "Caninos Labrador Core V2.1"; + compatible = "caninos,labrador-v2", "actions,s500"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; +}; + +&timer { + clocks = <&hosc>; +}; diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts new file mode 100644 index 000000000000..a2087e617cb2 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Roseapple Pi + * + * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + */ + +/dts-v1/; + +#include "owl-s500.dtsi" + +/ { + compatible = "roseapplepi,roseapplepi", "actions,s500"; + model = "Roseapple Pi"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; /* 2GB */ + }; + + uart2_clk: uart2-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&twd_timer { + status = "okay"; +}; + +&timer { + clocks = <&hosc>; +}; + +&uart2 { + status = "okay"; + clocks = <&uart2_clk>; +}; diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi index 5ceb6cc4451d..1dbe4e8b38ac 100644 --- a/arch/arm/boot/dts/owl-s500.dtsi +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -84,21 +84,21 @@ global_timer: timer@b0020200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xb0020200 0x100>; - interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; status = "disabled"; }; twd_timer: timer@b0020600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xb0020600 0x20>; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; status = "disabled"; }; twd_wdt: wdt@b0020620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0xb0020620 0xe0>; - interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index 5ae860788339..c4c6c7e9e37b 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -160,7 +160,6 @@ reg = <0x20000 0x1000>; #address-cells = <1>; #size-cells = <0>; - reg-io-width = <4>; banka: gpio-controller@0 { compatible = "snps,dw-apb-gpio-bank"; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi index fa93155fadb7..0e85bb6bd150 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi @@ -243,7 +243,6 @@ reg = <0x20000 0x1000>; #address-cells = <1>; #size-cells = <0>; - reg-io-width = <4>; banka: gpio-controller@0 { compatible = "snps,dw-apb-gpio-bank"; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 4dfe0f15d7bd..c349fd3758a6 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@70000000 { reg = <0x70000000 0x8000000>; }; @@ -68,6 +68,7 @@ &pinctrl_board_mmc &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 9c7b46b90c3c..7d3d93c22ed9 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -50,7 +50,7 @@ #size-cells = <1>; ranges = <0x40000000 0x40000000 0x80000000>; - l2-cache-controller@80040000 { + cache-controller@80040000 { compatible = "arm,pl310-cache"; reg = <0x80040000 0x1000>; interrupts = <59>; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 347b4f7d7889..dda2ceec6591 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -98,7 +98,7 @@ ranges; compatible = "simple-bus"; - L2: l2-cache@2040000 { + L2: cache-controller@2040000 { compatible = "arm,pl310-cache"; reg = <0x02040000 0x1000>; arm,data-latency = <2 2 0>; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index b9b138888048..45cf75b5824c 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -499,7 +499,7 @@ clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11"; }; - pinctrl: pin-controller@fcfe3000 { + pinctrl: pinctrl@fcfe3000 { compatible = "renesas,r7s72100-ports"; reg = <0xfcfe3000 0x4230>; diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi index 838920aef992..85c0399b1339 100644 --- a/arch/arm/boot/dts/r7s9210.dtsi +++ b/arch/arm/boot/dts/r7s9210.dtsi @@ -489,7 +489,7 @@ interrupt-map-mask = <7 0>; }; - pinctrl: pin-controller@fcffe000 { + pinctrl: pinctrl@fcffe000 { compatible = "renesas,r7s9210-pinctrl"; reg = <0xfcffe000 0x1000>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index b92e72579836..e5fb1ce261f7 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -221,7 +221,7 @@ power-domains = <&pd_c4>; }; - pfc: pin-controller@e6050000 { + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-r8a73a4"; reg = <0 0xe6050000 0 0x9000>; gpio-controller; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 8048303037ee..1b2cf5fa322b 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -311,7 +311,7 @@ status = "disabled"; }; - pfc: pin-controller@e6050000 { + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-r8a7740"; reg = <0xe6050000 0x8000>, <0xe605800c 0x20>; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts index 1479ced50873..961c0f2eeefb 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -27,6 +27,12 @@ status = "disabled"; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + ðer { pinctrl-0 = <ðer_pins>; pinctrl-names = "default"; @@ -49,6 +55,11 @@ }; &pfc { + can0_pins: can0 { + groups = "can0_data_d"; + function = "can0"; + }; + ether_pins: ether { groups = "eth_mdio", "eth_rmii"; function = "eth"; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index e90aaf1c94f0..c2c05c9685d1 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -52,6 +52,16 @@ clock-frequency = <26000000>; }; + leds { + compatible = "gpio-leds"; + + sdhi2_led { + label = "sdio-led"; + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + }; + }; + reg_1p5v: 1p5v { compatible = "regulator-fixed"; regulator-name = "1P5V"; @@ -131,17 +141,109 @@ }; }; +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&cmt0 { + status = "okay"; +}; + +&gpio1 { + can-trx-en-gpio{ + gpio-hog; + gpios = <28 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can-trx-en-gpio"; + }; +}; + +&hsusb { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + + status = "okay"; + + flash1: flash@0 { + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "user"; + reg = <0x00000000 0x00200000>; + }; + }; + }; +}; + +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + /* Disable hsusb to enable USB2.0 host mode support on J2 */ + /* status = "okay"; */ +}; + +&pci1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pci2 { + /* Disable xhci to enable USB2.0 host mode support on J23 bottom port */ + /* status = "okay"; */ +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec { + /* SW2[6] determines which connector is activated + * ON = PCIe X4 (connector-J7) + * OFF = mini-PCIe (connector-J26) + */ + status = "okay"; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_gmii"; function = "avb"; }; + can1_pins: can1 { + groups = "can1_data_b"; + function = "can1"; + }; + i2c2_pins: i2c2 { groups = "i2c2_b"; function = "i2c2"; }; + msiof0_pins: msiof0 { + groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx"; + function = "msiof0"; + }; + scifa2_pins: scifa2 { groups = "scifa2_data_c"; function = "scifa2"; @@ -168,6 +270,16 @@ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; function = "ssi"; }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1_pwen"; + function = "usb1"; + }; }; &rcar_sound { @@ -222,3 +334,11 @@ &ssi4 { shared-pin; }; + +&usbphy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi index 85aff429d408..5621c9ed698f 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi +++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi @@ -35,10 +35,28 @@ clock-frequency = <20000000>; }; -&pfc { - mmc1_pins: mmc1 { - groups = "mmc1_data4", "mmc1_ctrl"; - function = "mmc1"; +&gpio0 { + /* GP0_18 set low to select QSPI. Doing so will disable VIN2 */ + qspi_en { + gpio-hog; + gpios = <18 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "QSPI_EN"; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -51,3 +69,56 @@ non-removable; status = "okay"; }; + +&pfc { + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + mmc1_pins: mmc1 { + groups = "mmc1_data4", "mmc1_ctrl"; + function = "mmc1"; + }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data2"; + function = "qspi"; + }; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash: flash@0 { + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x000c0000>; + read-only; + }; + partition@c0000 { + label = "env"; + reg = <0x000c0000 0x00002000>; + }; + partition@c2000 { + label = "user"; + reg = <0x000c2000 0x0013e000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 0240d017c90d..6a78c813057b 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -36,6 +36,14 @@ clock-frequency = <0>; }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -188,6 +196,13 @@ clock-frequency = <0>; }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + pmu-0 { compatible = "arm,cortex-a15-pmu"; interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, @@ -323,11 +338,22 @@ resets = <&cpg 907>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7742"; reg = <0 0xe6060000 0 0x250>; }; + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7742", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7742-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -731,6 +757,22 @@ status = "disabled"; }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7742", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7742", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -965,6 +1007,146 @@ status = "disabled"; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7742", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7742", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7742", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7742", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7742", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a7742", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + }; + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required @@ -1476,6 +1658,159 @@ resets = <&cpg 408>; }; + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7742", + "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>, + <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + vsp@fe920000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 130>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 130>; + }; + + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; + + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 127>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7742"; + reg = <0 0xfeb00000 0 0x70000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; + resets = <&cpg 724>; + reset-names = "du.0"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7742-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds@feb94000 { + compatible = "renesas,r8a7742-lvds"; + reg = <0 0xfeb94000 0 0x14>; + clocks = <&cpg CPG_MOD 725>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 725>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { + }; + }; + }; + }; + prr: chipid@ff000044 { compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 896916a00b84..f444e418f408 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -265,7 +265,7 @@ resets = <&cpg 904>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7743"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index 6b56aa286337..0442aad4f9db 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -265,7 +265,7 @@ resets = <&cpg 904>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7744"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index b15b1b088a32..1c7b37a01f0a 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -53,42 +53,6 @@ clock-frequency = <26000000>; }; - rsnd_sgtl5000: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&sgtl5000>; - }; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vccq_panel: regulator-vccq-panel { - compatible = "regulator-fixed"; - regulator-name = "Panel VccQ"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; - enable-active-high; - }; - backlight_lcd: backlight { compatible = "pwm-backlight"; pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>; @@ -107,19 +71,40 @@ }; }; }; -}; -&du { - pinctrl-0 = <&du0_pins>; - pinctrl-names = "default"; + vccq_panel: regulator-vccq-panel { + compatible = "regulator-fixed"; + regulator-name = "Panel VccQ"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + enable-active-high; + }; - status = "okay"; + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; - ports { - port@0 { - endpoint { - remote-endpoint = <&lcd_in>; - }; + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; + + rsnd_sgtl5000: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; }; }; }; @@ -150,6 +135,21 @@ status = "okay"; }; +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; +}; + &hscif1 { pinctrl-0 = <&hscif1_pins>; pinctrl-names = "default"; @@ -171,6 +171,15 @@ status = "okay"; clock-frequency = <400000>; + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0x0a>; + clocks = <&audio_clock>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; + stmpe811@44 { compatible = "st,stmpe811"; reg = <0x44>; @@ -179,7 +188,7 @@ /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; - /* ADC converstion time: 80 clocks */ + /* ADC conversion time: 80 clocks */ st,sample-time = <4>; /* 12-bit ADC */ st,mod-12b = <1>; @@ -203,15 +212,6 @@ st,touch-det-delay = <5>; }; }; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - #sound-dai-cells = <0>; - reg = <0x0a>; - clocks = <&audio_clock>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - }; }; &pci1 { diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 636248f370e0..0f14ac22921d 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -230,7 +230,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7745"; reg = <0 0xe6060000 0 0x11c>; }; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 6baa126b6590..691b1a131c87 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -187,7 +187,7 @@ resets = <&cpg 907>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a77470"; reg = <0 0xe6060000 0 0x118>; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 1612b003fb55..c9f8735860bf 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -142,7 +142,7 @@ interrupt-controller; }; - pfc: pin-controller@fffc0000 { + pfc: pinctrl@fffc0000 { compatible = "renesas,pfc-r8a7778"; reg = <0xfffc0000 0x118>; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index c5634daef96f..74d7e9084eab 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -321,7 +321,7 @@ status = "disabled"; }; - pfc: pin-controller@fffc0000 { + pfc: pinctrl@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 769ba2a33d39..b0569b4ea5c8 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -363,7 +363,7 @@ resets = <&cpg 907>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7790"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 499cf388735f..87f0d6dc3e5a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -286,7 +286,7 @@ resets = <&cpg 904>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 597848ad4dfa..f5b299bfcb23 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -296,7 +296,7 @@ resets = <&cpg 913>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7792"; reg = <0 0xe6060000 0 0x144>; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 6d507091b163..f930f69f7bcc 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -271,7 +271,7 @@ resets = <&cpg 904>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7793"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 5f340397ab64..cd5e2904068a 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -238,7 +238,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7794"; reg = <0 0xe6060000 0 0x11c>; }; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index ee59cc84f212..c47896e4ab58 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -165,7 +165,7 @@ status = "disabled"; }; - pinctrl: pin-controller@40067000 { + pinctrl: pinctrl@40067000 { compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; reg = <0x40067000 0x1000>, <0x51000000 0x480>; clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 0a56a2f1bc4d..eba7a1344976 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -63,7 +63,11 @@ }; &cpu0 { - cpu0-supply = <&vdd_arm>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; }; &i2c1 { diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 7e01f6406a86..6b121658d93c 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -47,7 +47,11 @@ }; &cpu0 { - cpu0-supply = <&vdd_arm>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; }; &i2c1 { diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index f9db6bb9fa11..309518403d86 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -128,7 +128,11 @@ }; &cpu0 { - cpu0-supply = <&vdd_arm>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; }; &emac { diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index b599394d149d..252750c97f97 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -36,7 +36,7 @@ clock-latency = <40000>; clocks = <&cru ARMCLK>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 018802df4c0e..c4ca73b40d4a 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -247,7 +247,7 @@ pinctrl-0 = <&rgmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &gpu { diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 61435d8ee37b..36efa36b7190 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -61,7 +61,7 @@ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &i2c0 { diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index e5c4fd4ea67e..7fb582302b32 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -191,7 +191,7 @@ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &gpu { diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 213c9eb84f76..cf54d5ffff2f 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -81,7 +81,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &emmc { @@ -108,7 +120,7 @@ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 6a51940398b5..8c7376d64bc4 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -103,7 +103,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &emmc { @@ -149,7 +161,7 @@ pinctrl-0 = <&rgmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index a258c7ae5329..55467bc30fa6 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -91,7 +91,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &gmac { @@ -107,7 +119,7 @@ pinctrl-0 = <&rgmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 3cca4d0f9b09..c4d1d142d8c6 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -156,7 +156,7 @@ }; &gmac { - status = "ok"; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 90e9be443fe6..9c1e38c54eae 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -137,7 +137,7 @@ snps,reset-delays-us = <0 10000 1000000>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &gpu { diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 1a20854a1317..aa50f8ed4ca0 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -125,7 +125,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &emmc { diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 811bfdef4e9b..47626ede6fdd 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -17,18 +17,11 @@ reg = <0x30000000 0x4000000>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - xti: xti@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "xti"; - #clock-cells = <0>; - }; + xti: clock-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 6adf64ea3ff2..4f084f4fe44f 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -18,54 +18,22 @@ }; cpus { - cpu { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; compatible = "arm,arm926ej-s"; + reg = <0x0>; }; }; - interrupt-controller@4a000000 { - compatible = "samsung,s3c2416-irq"; - }; - clocks: clock-controller@4c000000 { compatible = "samsung,s3c2416-clock"; reg = <0x4c000000 0x40>; #clock-cells = <1>; }; - pinctrl@56000000 { - compatible = "samsung,s3c2416-pinctrl"; - }; - - timer@51000000 { - clocks = <&clocks PCLK_PWM>; - clock-names = "timers"; - }; - - uart_0: serial@50000000 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, - <&clocks SCLK_UART>; - }; - - uart_1: serial@50004000 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, - <&clocks SCLK_UART>; - }; - - uart_2: serial@50008000 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, - <&clocks SCLK_UART>; - }; - uart_3: serial@5000c000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; @@ -98,22 +66,59 @@ <&clocks MUX_HSMMC1>; status = "disabled"; }; +}; - watchdog: watchdog@53000000 { - interrupts = <1 9 27 3>; - clocks = <&clocks PCLK_WDT>; - clock-names = "watchdog"; - }; +&i2c { + compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; +}; - rtc: rtc@57000000 { - compatible = "samsung,s3c2416-rtc"; - clocks = <&clocks PCLK_RTC>; - clock-names = "rtc"; - }; +&intc { + compatible = "samsung,s3c2416-irq"; +}; - i2c@54000000 { - compatible = "samsung,s3c2440-i2c"; - clocks = <&clocks PCLK_I2C0>; - clock-names = "i2c"; - }; +&pinctrl_0 { + compatible = "samsung,s3c2416-pinctrl"; +}; + +&rtc { + compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; +}; + +&timer { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; +}; + +&uart_0 { + compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; +}; + +&uart_1 { + compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; +}; + +&uart_2 { + compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; +}; + +&watchdog { + interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi index 6d8dd3cdd3c0..06f82c7e458e 100644 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -13,12 +13,12 @@ aliases { pinctrl0 = &pinctrl_0; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; + serial0 = &uart_0; + serial1 = &uart_1; + serial2 = &uart_2; }; - intc:interrupt-controller@4a000000 { + intc: interrupt-controller@4a000000 { compatible = "samsung,s3c2410-irq"; reg = <0x4a000000 0x100>; interrupt-controller; @@ -39,49 +39,49 @@ }; }; - timer@51000000 { + timer: pwm@51000000 { compatible = "samsung,s3c2410-pwm"; reg = <0x51000000 0x1000>; interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>; - #pwm-cells = <4>; + #pwm-cells = <3>; }; - uart0: serial@50000000 { + uart_0: serial@50000000 { compatible = "samsung,s3c2410-uart"; reg = <0x50000000 0x4000>; interrupts = <1 28 0 4>, <1 28 1 4>; status = "disabled"; }; - uart1: serial@50004000 { + uart_1: serial@50004000 { compatible = "samsung,s3c2410-uart"; reg = <0x50004000 0x4000>; interrupts = <1 23 3 4>, <1 23 4 4>; status = "disabled"; }; - uart2: serial@50008000 { + uart_2: serial@50008000 { compatible = "samsung,s3c2410-uart"; reg = <0x50008000 0x4000>; interrupts = <1 15 6 4>, <1 15 7 4>; status = "disabled"; }; - watchdog@53000000 { + watchdog: watchdog@53000000 { compatible = "samsung,s3c2410-wdt"; reg = <0x53000000 0x100>; interrupts = <0 0 9 3>; status = "disabled"; }; - rtc@57000000 { + rtc: rtc@57000000 { compatible = "samsung,s3c2410-rtc"; reg = <0x57000000 0x100>; interrupts = <0 0 30 3>, <0 0 8 3>; status = "disabled"; }; - i2c@54000000 { + i2c: i2c@54000000 { compatible = "samsung,s3c2410-i2c"; reg = <0x54000000 0x100>; interrupts = <0 0 27 3>; diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 1aeac33b0d34..285555b9ed94 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -28,29 +28,21 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - fin_pll: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; + fin_pll: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; }; - srom-cs1@18000000 { + srom-cs1-bus@18000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index 96267f5f02a8..69c9ec4cf381 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -28,29 +28,21 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - fin_pll: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; + fin_pll: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; }; - srom-cs1@18000000 { + srom-cs1-bus@18000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index 2e611df37911..cb11a87dbc42 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -34,7 +34,7 @@ cpu@0 { device_type = "cpu"; - compatible = "arm,arm1176jzf-s", "arm,arm1176"; + compatible = "arm,arm1176jzf-s"; reg = <0x0>; }; }; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index 14969b6529e8..8e57e5a1f0c5 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "s5pv210.dtsi" @@ -32,42 +33,40 @@ 0x40000000 0x18000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + pmic_ap_clk: clock-0 { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; - vtf_reg: fixed-regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "V_TF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&mp05 4 0>; - enable-active-high; - }; + vtf_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&mp05 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - pda_reg: fixed-regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - reg = <1>; - }; + pda_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - bat_reg: fixed-regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "V_BAT"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - reg = <2>; - }; + bat_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; }; i2c_pmic: i2c-pmic { compatible = "i2c-gpio"; - gpios = <&gpj4 0 0>, /* sda */ - <&gpj4 3 0>; /* scl */ + sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; @@ -77,13 +76,13 @@ reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, - <&gph0 4 0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, <1200000>, <1200000>; max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; regulators { @@ -228,6 +227,11 @@ regulator-always-on; }; + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + vichg_reg: ENVICHG { regulator-name = "VICHG"; }; @@ -326,6 +330,11 @@ status = "okay"; }; +&rtc { + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci0 { bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index 822207f63ee0..bd4450dbdcb6 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -47,6 +47,18 @@ }; }; + pmic_ap_clk: clock-0 { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + bt_codec: bt_sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <0>; + }; + vibrator_pwr: regulator-fixed-0 { compatible = "regulator-fixed"; regulator-name = "vibrator-en"; @@ -54,7 +66,7 @@ gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctr-0 = <&vibrator_ena>; + pinctrl-0 = <&vibrator_ena>; }; touchkey_vdd: regulator-fixed-1 { @@ -533,7 +545,7 @@ value = <0x5200>; }; - spi_lcd: spi-gpio-0 { + spi_lcd: spi-2 { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -624,6 +636,11 @@ }; }; +&i2s0 { + dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>; + status = "okay"; +}; + &mfc { memory-region = <&mfc_left>, <&mfc_right>; }; @@ -815,6 +832,11 @@ samsung,pwm-outputs = <1>; }; +&rtc { + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci1 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index 65eed01cfced..ca064359dd30 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -35,6 +35,80 @@ linux,code = <KEY_VOLUMEUP>; }; }; + + headset_micbias_reg: regulator-fixed-3 { + compatible = "regulator-fixed"; + regulator-name = "Headset_Micbias"; + gpio = <&gpj2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&headset_micbias_ena>; + }; + + main_micbias_reg: regulator-fixed-4 { + compatible = "regulator-fixed"; + regulator-name = "Main_Micbias"; + gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&main_micbias_ena>; + }; + + sound { + compatible = "samsung,fascinate4g-wm8994"; + + model = "Fascinate4G"; + + extcon = <&fsa9480>; + + main-micbias-supply = <&main_micbias_reg>; + headset-micbias-supply = <&headset_micbias_reg>; + + earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>; + + io-channels = <&adc 3>; + io-channel-names = "headset-detect"; + headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>; + headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>; + + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "Main Mic", + "IN1LN", "Main Mic", + + "IN1RP", "Headset Mic", + "IN1RN", "Headset Mic", + + "Modem Out", "Modem TX", + "Modem RX", "Modem In", + + "Bluetooth SPK", "TX", + "RX", "Bluetooth Mic"; + + pinctrl-names = "default"; + pinctrl-0 = <&headset_det &earpath_sel>; + + cpu { + sound-dai = <&i2s0>, <&bt_codec>; + }; + + codec { + sound-dai = <&wm8994>; + }; + }; }; &fg { @@ -51,6 +125,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep_cfg>; + headset_det: headset-det { + samsung,pins = "gph0-6", "gph3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + fg_irq: fg-irq { samsung,pins = "gph3-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_F>; @@ -58,6 +138,24 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + headset_micbias_ena: headset-micbias-ena { + samsung,pins = "gpj2-5"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + earpath_sel: earpath-sel { + samsung,pins = "gpj2-6"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + main_micbias_ena: main-micbias-ena { + samsung,pins = "gpj4-2"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + /* Based on vendor kernel v2.6.35.7 */ sleep_cfg: sleep-cfg { PIN_SLP(gpa0-0, PREV, NONE); diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index 5d10dd67eacc..560f830b6f6b 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -72,6 +72,73 @@ pinctrl-0 = <&fm_irq &fm_rst>; }; }; + + micbias_reg: regulator-fixed-3 { + compatible = "regulator-fixed"; + regulator-name = "MICBIAS"; + gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&micbias_reg_ena>; + }; + + sound { + compatible = "samsung,aries-wm8994"; + + model = "Aries"; + + extcon = <&fsa9480>; + + main-micbias-supply = <&micbias_reg>; + headset-micbias-supply = <&micbias_reg>; + + earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>; + + io-channels = <&adc 3>; + io-channel-names = "headset-detect"; + headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_LOW>; + headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>; + + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "Main Mic", + "IN1LN", "Main Mic", + + "IN1RP", "Headset Mic", + "IN1RN", "Headset Mic", + + "IN2LN", "FM In", + "IN2RN", "FM In", + + "Modem Out", "Modem TX", + "Modem RX", "Modem In", + + "Bluetooth SPK", "TX", + "RX", "Bluetooth Mic"; + + pinctrl-names = "default"; + pinctrl-0 = <&headset_det &earpath_sel>; + + cpu { + sound-dai = <&i2s0>, <&bt_codec>; + }; + + codec { + sound-dai = <&wm8994>; + }; + }; }; &aliases { @@ -88,6 +155,12 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + headset_det: headset-det { + samsung,pins = "gph0-6", "gph3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + fm_irq: fm-irq { samsung,pins = "gpj2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; @@ -102,6 +175,12 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + earpath_sel: earpath-sel { + samsung,pins = "gpj2-6"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + massmemory_en: massmemory-en { samsung,pins = "gpj2-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; @@ -109,6 +188,12 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + micbias_reg_ena: micbias-reg-ena { + samsung,pins = "gpj4-2"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + /* Based on CyanogenMod 3.0.101 kernel */ sleep_cfg: sleep-cfg { PIN_SLP(gpa0-0, PREV, NONE); diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index fbbd93707404..ad8d5d2fa32d 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -11,6 +11,8 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "s5pv210.dtsi" @@ -33,52 +35,49 @@ 0x50000000 0x08000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + pmic_ap_clk: clock-0 { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; - vtf_reg: fixed-regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "V_TF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - reg = <0>; - gpio = <&mp05 4 0>; - enable-active-high; - }; + vtf_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&mp05 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - pda_reg: fixed-regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - reg = <1>; - }; + pda_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - bat_reg: fixed-regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "V_BAT"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - reg = <2>; - }; + bat_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; - tsp_reg: fixed-regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "TSP_VDD"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - reg = <3>; - gpio = <&gpj1 3 0>; - enable-active-high; - }; + tsp_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_VDD"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>; + enable-active-high; }; i2c_pmic: i2c-pmic { compatible = "i2c-gpio"; - gpios = <&gpj4 0 0>, /* sda */ - <&gpj4 3 0>; /* scl */ + sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; @@ -88,13 +87,13 @@ reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, - <&gph0 4 0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, <1200000>, <1200000>; max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; regulators { @@ -224,6 +223,11 @@ regulator-max-microvolt = <1200000>; regulator-always-on; }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; }; }; }; @@ -308,6 +312,11 @@ status = "okay"; }; +&rtc { + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci0 { bus-width = <4>; non-removable; @@ -348,7 +357,7 @@ compatible = "atmel,maxtouch"; reg = <0x4a>; interrupt-parent = <&gpj0>; - interrupts = <5 2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; atmel,x-line = <17>; atmel,y-line = <11>; @@ -378,8 +387,8 @@ clock-frequency = <16000000>; clocks = <&camera 0>; clock-names = "mclk"; - nreset-gpios = <&gpb 2 0>; - nstby-gpios = <&gpb 0 0>; + nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>; + nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>; port { noon010pc30_ep: endpoint { diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts index e5aec6c526fb..0c623b78af72 100644 --- a/arch/arm/boot/dts/s5pv210-smdkc110.dts +++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts @@ -30,6 +30,13 @@ device_type = "memory"; reg = <0x20000000 0x20000000>; }; + + pmic_ap_clk: clock-0 { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; &xusbxti { @@ -54,6 +61,8 @@ &rtc { status = "okay"; + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &i2c0 { diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index 84b38f185199..7459e41e8ef1 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -15,6 +15,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "s5pv210.dtsi" @@ -31,11 +32,18 @@ reg = <0x20000000 0x40000000>; }; - ethernet@18000000 { + pmic_ap_clk: clock-0 { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + ethernet@a8000000 { compatible = "davicom,dm9000"; reg = <0xA8000000 0x2 0xA8000002 0x2>; interrupt-parent = <&gph1>; - interrupts = <1 4>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; local-mac-address = [00 00 de ad be ef]; davicom,no-eeprom; }; @@ -147,6 +155,8 @@ &rtc { status = "okay"; + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &sdhci0 { diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts index cd25e72ccd84..e18259737684 100644 --- a/arch/arm/boot/dts/s5pv210-torbreck.dts +++ b/arch/arm/boot/dts/s5pv210-torbreck.dts @@ -30,6 +30,13 @@ device_type = "memory"; reg = <0x20000000 0x20000000>; }; + + pmic_ap_clk: clock-0 { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; &xusbxti { @@ -54,6 +61,8 @@ &rtc { status = "okay"; + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &sdhci0 { diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 1b0ee884e91d..2871351ab907 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -52,34 +52,26 @@ }; }; + xxti: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xxti"; + #clock-cells = <0>; + }; + + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xusbxti"; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - external-clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - xxti: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <0>; - clock-output-names = "xxti"; - #clock-cells = <0>; - }; - - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-frequency = <0>; - clock-output-names = "xusbxti"; - #clock-cells = <0>; - }; - }; - onenand: onenand@b0600000 { compatible = "samsung,s5pv210-onenand"; reg = <0xb0600000 0x2000>, @@ -100,19 +92,16 @@ }; clocks: clock-controller@e0100000 { - compatible = "samsung,s5pv210-clock", "simple-bus"; + compatible = "samsung,s5pv210-clock"; reg = <0xe0100000 0x10000>; clock-names = "xxti", "xusbxti"; clocks = <&xxti>, <&xusbxti>; #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + }; - pmu_syscon: syscon@e0108000 { - compatible = "samsung-s5pv210-pmu", "syscon"; - reg = <0xe0108000 0x8000>; - }; + pmu_syscon: syscon@e0108000 { + compatible = "samsung-s5pv210-pmu", "syscon"; + reg = <0xe0108000 0x8000>; }; pinctrl0: pinctrl@e0200000 { @@ -128,35 +117,28 @@ }; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - pdma0: dma@e0900000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xe0900000 0x1000>; - interrupt-parent = <&vic0>; - interrupts = <19>; - clocks = <&clocks CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: dma@e0900000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0900000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <19>; + clocks = <&clocks CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; - pdma1: dma@e0a00000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xe0a00000 0x1000>; - interrupt-parent = <&vic0>; - interrupts = <20>; - clocks = <&clocks CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma1: dma@e0a00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0a00000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <20>; + clocks = <&clocks CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; adc: adc@e1700000 { @@ -241,43 +223,36 @@ status = "disabled"; }; - audio-subsystem { - compatible = "samsung,s5pv210-audss", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clk_audss: clock-controller@eee10000 { - compatible = "samsung,s5pv210-audss-clock"; - reg = <0xeee10000 0x1000>; - clock-names = "hclk", "xxti", - "fout_epll", - "sclk_audio0"; - clocks = <&clocks DOUT_HCLKP>, <&xxti>, - <&clocks FOUT_EPLL>, - <&clocks SCLK_AUDIO0>; - #clock-cells = <1>; - }; + clk_audss: clock-controller@eee10000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xeee10000 0x1000>; + clock-names = "hclk", "xxti", + "fout_epll", + "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, + <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + #clock-cells = <1>; + }; - i2s0: i2s@eee30000 { - compatible = "samsung,s5pv210-i2s"; - reg = <0xeee30000 0x1000>; - interrupt-parent = <&vic2>; - interrupts = <16>; - dma-names = "rx", "tx", "tx-sec"; - dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; - clock-names = "iis", - "i2s_opclk0", - "i2s_opclk1"; - clocks = <&clk_audss CLK_I2S>, - <&clk_audss CLK_I2S>, - <&clk_audss CLK_DOUT_AUD_BUS>; - samsung,idma-addr = <0xc0010000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - #sound-dai-cells = <0>; - status = "disabled"; - }; + i2s0: i2s@eee30000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0xeee30000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <16>; + dma-names = "rx", "tx", "tx-sec"; + dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + clock-names = "iis", + "i2s_opclk0", + "i2s_opclk1"; + clocks = <&clk_audss CLK_I2S>, + <&clk_audss CLK_I2S>, + <&clk_audss CLK_DOUT_AUD_BUS>; + samsung,idma-addr = <0xc0010000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <0>; + status = "disabled"; }; i2s1: i2s@e2100000 { diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 42f76212d472..84066c1298df 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -32,16 +32,17 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x10000000>; }; @@ -61,6 +62,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x100000>; }; ahb { diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index d7f25706892d..2ddc85dff8ce 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -72,7 +72,7 @@ }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x20000000>; }; @@ -94,6 +94,9 @@ ns_sram: sram@200000 { compatible = "mmio-sram"; reg = <0x00200000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00200000 0x20000>; }; ahb { @@ -106,6 +109,10 @@ compatible = "mmio-sram"; no-memory-wc; reg = <0x00100000 0x2400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00100000 0x2400>; + }; usb0: gadget@300000 { @@ -535,6 +542,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "spi_clk"; dmas = <&dma0 @@ -603,6 +612,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "spi_clk"; dmas = <&dma0 @@ -810,6 +821,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "spi_clk"; dmas = <&dma0 @@ -878,6 +891,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "spi_clk"; dmas = <&dma0 @@ -947,6 +962,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "spi_clk"; dmas = <&dma0 diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 0bb5b6fa0748..86137f8d2b45 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -55,7 +55,7 @@ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x8000000>; }; @@ -83,6 +83,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x20000>; }; ahb { @@ -1073,6 +1076,9 @@ compatible = "mmio-sram"; no-memory-wc; reg = <0x200000 0x2400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x200000 0x2400>; }; usb0: gadget@500000 { diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 65566e4b78d8..384335635792 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -14,7 +14,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi index 9d2563602cbe..5579c955f141 100644 --- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -12,7 +12,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 2d9f853ab15f..04f24cf752d3 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -53,7 +53,7 @@ }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x20000000>; }; @@ -81,6 +81,9 @@ ns_sram: sram@210000 { compatible = "mmio-sram"; reg = <0x00210000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00210000 0x10000>; }; ahb { @@ -93,6 +96,9 @@ compatible = "mmio-sram"; no-memory-wc; reg = <0x100000 0x2400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x100000 0x2400>; }; usb0: gadget@400000 { diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts new file mode 100644 index 000000000000..3cc9a23910be --- /dev/null +++ b/arch/arm/boot/dts/sd5203.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Hisilicon Limited. + * + * DTS file for Hisilicon SD5203 Board + */ + +/dts-v1/; + +/ { + model = "Hisilicon SD5203"; + compatible = "H836ASDJ", "hisilicon,sd5203"; + interrupt-parent = <&vic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000"; + }; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0 { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + reg = <0x0>; + }; + }; + + memory@30000000 { + device_type = "memory"; + reg = <0x30000000 0x8000000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + vic: interrupt-controller@10130000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x10130000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + refclk125mhz: refclk125mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + timer0: timer@16002000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x16002000 0x1000>; + interrupts = <4>; + clocks = <&refclk125mhz>; + clock-names = "apb_pclk"; + }; + + timer1: timer@16003000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x16003000 0x1000>; + interrupts = <5>; + clocks = <&refclk125mhz>; + clock-names = "apb_pclk"; + }; + + uart0: serial@1600d000 { + compatible = "snps,dw-apb-uart"; + reg = <0x1600d000 0x1000>; + bus_id = "uart0"; + clocks = <&refclk125mhz>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + interrupts = <17>; + }; + + uart1: serial@1600c000 { + compatible = "snps,dw-apb-uart"; + reg = <0x1600c000 0x1000>; + clocks = <&refclk125mhz>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + interrupts = <16>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index a4d63125ac56..30c67acc4e35 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -448,7 +448,7 @@ status = "disabled"; }; - pfc: pin-controller@e6050000 { + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-sh73a0"; reg = <0xe6050000 0x8000>, <0xe605801c 0x1c>; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index f187da4485f4..c87b881b2c8b 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -43,7 +43,7 @@ 0 7 0x04>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xed000000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 33e3b0b3c53d..ff47cbf6ed3b 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -58,16 +58,21 @@ reg = <0x33>; label = "lp5521_pri"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; linux,default-trigger = "heartbeat"; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; @@ -77,15 +82,20 @@ reg = <0x34>; label = "lp5521_sec"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 1e26b711d43d..a1093cb37dc7 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -316,6 +316,28 @@ }; }; }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dsi_default_mode>; + + dsi-controller@a0351000 { + panel@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + vdd3-supply = <&panel_reg_3v0>; + vci-supply = <&panel_reg_1v8>; + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + /* ESD (electrostatic discharge) detection interrupt */ + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "esd"; + pinctrl-names = "default"; + pinctrl-0 = <&display_default_mode>; + }; + }; + }; }; gpio-keys { @@ -415,6 +437,40 @@ pinctrl-names = "default"; pinctrl-0 = <&wlan_en_default>; }; + + /* MIC5366 GPIO-controlled regulator */ + panel_reg_1v8: regulator-panel-1v8 { + compatible = "regulator-fixed"; + + regulator-name = "panel-fixed-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* GPIO219 */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <200>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reg_default_mode>; + }; + + /* MIC5366 GPIO-controlled regulator */ + panel_reg_3v0: regulator-panel-3v0 { + compatible = "regulator-fixed"; + + regulator-name = "panel-fixed-supply"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* GPIO219 */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <200>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reg_default_mode>; + }; }; &pinctrl { @@ -476,6 +532,41 @@ }; }; + mcde { + dsi_default_mode: dsi_default { + default_mux1 { + /* Mux in VSI0 used for DSI TE */ + function = "lcd"; + groups = + "lcdvsi0_a_1"; /* VSI0 for LCD */ + }; + default_cfg1 { + pins = + "GPIO68_E1"; /* VSI0 */ + ste,config = <&in_nopull>; + }; + }; + }; + + display { + display_default_mode: display_default { + golden_cfg1 { + pins = "GPIO139_C9"; /* MIPI_DSI0_RESET_N */ + ste,config = <&gpio_out_lo>; + }; + golden_cfg2 { + pins = "GPIO82_C1"; /* LDI_ESD_DET */ + ste,config = <&gpio_in_pu>; + }; + }; + panel_reg_default_mode: panel_reg_default { + golden_cfg1 { + pins = "GPIO219_AG10"; /* LCD_PWR_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + proximity { proximity_default: proximity_default { golden_cfg1 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index d6f6ac04a48a..27722c42b61c 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -108,15 +108,12 @@ }; }; - /* - * FIXME: this is not quite GPIO backlight. This is a - * KTD253 one-wire GPIO-controlled backlight. It can - * work as a GPIO backlight. - */ - gpio_bl: backlight { - compatible = "gpio-backlight"; + ktd253: backlight { + compatible = "kinetic,ktd253"; /* GPIO 69 */ - gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + /* Default to 13/32 brightness */ + default-brightness = <13>; pinctrl-names = "default"; pinctrl-0 = <&gpio_backlight_default_mode>; }; @@ -409,7 +406,7 @@ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&display_default_mode>; - backlight = <&gpio_bl>; + backlight = <&ktd253>; }; }; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 69e2f1e78ed6..7febe19e780d 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -110,6 +110,7 @@ compatible = "st,stm32h7-spi"; reg = <0x40003800 0x400>; interrupts = <36>; + resets = <&rcc STM32H7_APB1L_RESET(SPI2)>; clocks = <&rcc SPI2_CK>; status = "disabled"; @@ -121,12 +122,13 @@ compatible = "st,stm32h7-spi"; reg = <0x40003c00 0x400>; interrupts = <51>; + resets = <&rcc STM32H7_APB1L_RESET(SPI3)>; clocks = <&rcc SPI3_CK>; status = "disabled"; }; usart2: serial@40004400 { - compatible = "st,stm32f7-uart"; + compatible = "st,stm32h7-uart"; reg = <0x40004400 0x400>; interrupts = <38>; status = "disabled"; @@ -194,7 +196,7 @@ }; usart1: serial@40011000 { - compatible = "st,stm32f7-uart"; + compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; interrupts = <37>; status = "disabled"; @@ -207,6 +209,7 @@ compatible = "st,stm32h7-spi"; reg = <0x40013000 0x400>; interrupts = <35>; + resets = <&rcc STM32H7_APB2_RESET(SPI1)>; clocks = <&rcc SPI1_CK>; status = "disabled"; }; @@ -217,6 +220,7 @@ compatible = "st,stm32h7-spi"; reg = <0x40013400 0x400>; interrupts = <84>; + resets = <&rcc STM32H7_APB2_RESET(SPI4)>; clocks = <&rcc SPI4_CK>; status = "disabled"; }; @@ -227,6 +231,7 @@ compatible = "st,stm32h7-spi"; reg = <0x40015000 0x400>; interrupts = <85>; + resets = <&rcc STM32H7_APB2_RESET(SPI5)>; clocks = <&rcc SPI5_CK>; status = "disabled"; }; @@ -329,6 +334,16 @@ status = "disabled"; }; + ltdc: display-controller@50001000 { + compatible = "st,stm32-ltdc"; + reg = <0x50001000 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32H7_APB3_RESET(LTDC)>; + clocks = <&rcc LTDC_CK>; + clock-names = "lcd"; + status = "disabled"; + }; + mdma1: dma-controller@52000000 { compatible = "st,stm32h7-mdma"; reg = <0x52000000 0x1000>; @@ -372,6 +387,7 @@ compatible = "st,stm32h7-spi"; reg = <0x58001400 0x400>; interrupts = <86>; + resets = <&rcc STM32H7_APB4_RESET(SPI6)>; clocks = <&rcc SPI6_CK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index b5a66429670c..d84686e00370 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1437,6 +1437,24 @@ }; }; + sdmmc2_d47_pins_d: sdmmc2-d47-3 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc2_d47_sleep_pins_d: sdmmc2-d47-sleep-3 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + sdmmc3_b4_pins_a: sdmmc3-b4-0 { pins1 { pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ @@ -1700,6 +1718,14 @@ }; }; + uart8_rtscts_pins_a: uart8rtscts-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF8)>, /* UART8_RTS */ + <STM32_PINMUX('G', 10, AF8)>; /* UART8_CTS */ + bias-disable; + }; + }; + spi4_pins_a: spi4-0 { pins { pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */ diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index bfe29023fbd5..84757901cd8d 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -23,6 +23,13 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1302,23 +1309,38 @@ dma-requests = <48>; }; - fmc: nand-controller@58002000 { - compatible = "st,stm32mp15-fmc2"; - reg = <0x58002000 0x1000>, - <0x80000000 0x1000>, - <0x88010000 0x1000>, - <0x88020000 0x1000>, - <0x81000000 0x1000>, - <0x89010000 0x1000>, - <0x89020000 0x1000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>, - <&mdma1 20 0x10 0x12000a08 0x0 0x0>, - <&mdma1 21 0x10 0x12000a0a 0x0 0x0>; - dma-names = "tx", "rx", "ecc"; + fmc: memory-controller@58002000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "st,stm32mp1-fmc2-ebi"; + reg = <0x58002000 0x1000>; clocks = <&rcc FMC_K>; resets = <&rcc FMC_R>; status = "disabled"; + + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ + <4 0 0x80000000 0x10000000>; /* NAND */ + + nand-controller@4,0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32mp1-fmc2-nfc"; + reg = <4 0x00000000 0x1000>, + <4 0x08010000 0x1000>, + <4 0x08020000 0x1000>, + <4 0x01000000 0x1000>, + <4 0x09010000 0x1000>, + <4 0x09020000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>, + <&mdma1 20 0x2 0x12000a08 0x0 0x0>, + <&mdma1 21 0x2 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + status = "disabled"; + }; }; qspi: spi@58003000 { diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi index 6d9ab08667fc..1c1889b194cf 100644 --- a/arch/arm/boot/dts/stm32mp153.dtsi +++ b/arch/arm/boot/dts/stm32mp153.dtsi @@ -16,6 +16,12 @@ }; }; + arm-pmu { + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + soc { m_can1: can@4400e000 { compatible = "bosch,m_can"; diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts new file mode 100644 index 000000000000..02a39132958e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + * + * DHCOM STM32MP1 variant: + * DHCM-STM32MP153C-C065-R102-F0819-SPI-E2-CAN2-RTC-I-01D2 + * DHCOM PCB number: 587-200 or newer + * DRC02 PCB number: 568-100 or newer + */ +/dts-v1/; + +#include "stm32mp153.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcom-som.dtsi" +#include "stm32mp15xx-dhcom-drc02.dtsi" + +/ { + model = "DH electronics STM32MP153C DHCOM DRC02"; + compatible = "dh,stm32mp153c-dhcom-drc02", "dh,stm32mp153c-dhcom-som", + "st,stm32mp153"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&m_can2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts index 197aa98d49e2..d3b81382f97c 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts @@ -4,7 +4,7 @@ * * DHCOM STM32MP1 variant: * DHCM-STM32MP157C-C065-R102-F0819-SPI-E2-CAN2-SDR104-RTC-WBT-T-DSI-I-01D2 - * DHCOR PCB number: 587-200 or newer + * DHCOM PCB number: 587-200 or newer * PDK2 PCB number: 516-400 or newer */ /dts-v1/; @@ -15,7 +15,7 @@ #include "stm32mp15xx-dhcom-pdk2.dtsi" / { - model = "DH Electronics STM32MP157C DHCOM Premium Developer Kit (2)"; + model = "DH electronics STM32MP157C DHCOM Premium Developer Kit (2)"; compatible = "dh,stm32mp157c-dhcom-pdk2", "dh,stm32mp157c-dhcom-som", "st,stm32mp157"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 85628e16d2d5..a55e80ce2602 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -158,14 +158,16 @@ pinctrl-0 = <&fmc_pins_a>; pinctrl-1 = <&fmc_sleep_pins_a>; status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - nand@0 { - reg = <0>; - nand-on-flash-bbt; - #address-cells = <1>; - #size-cells = <1>; + nand-controller@4,0 { + status = "okay"; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index 5700e6b700d3..1e5333fd437f 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -121,8 +121,6 @@ reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ interrupt-parent = <&gpioa>; interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */ - rxc-skew-ps = <1860>; - txc-skew-ps = <1860>; reset-assert-us = <10000>; reset-deassert-us = <300>; micrel,force-master; @@ -214,6 +212,7 @@ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>; pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>; bus-width = <8>; + mmc-ddr-3_3v; no-1-8-v; no-sd; no-sdio; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi new file mode 100644 index 000000000000..6cf49a0a9e69 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "Seeed Studio Odyssey-STM32MP157C SOM"; + compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_d>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_d>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts new file mode 100644 index 000000000000..a7ffec8f1516 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. + */ + +/dts-v1/; + +#include "stm32mp157c-odyssey-som.dtsi" + +/ { + model = "Seeed Studio Odyssey-STM32MP157C Board"; + compatible = "seeed,stm32mp157c-odyssey", + "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>; + assigned-clock-parents = <&rcc PLL4_P>; + assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */ + st,eth-clk-sel; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@7 { /* KSZ9031RN */ + reg = <7>; + reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi new file mode 100644 index 000000000000..62ab23824a3e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&adc { + status = "disabled"; +}; + +&dac { + status = "disabled"; +}; + +&gpiob { + /* + * NOTE: On DRC02, the RS485_RX_En is controlled by a separate + * GPIO line, however the STM32 UART driver assumes RX happens + * during TX anyway and that it only controls drive enable DE + * line. Hence, the RX is always enabled here. + */ + rs485-rx-en { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "rs485-rx-en"; + }; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "Out1", + "Out2", "", "", ""; +}; + +&gpioi { + gpio-line-names = "In1", "", "", "", + "", "", "", "", + "In2", "", "", "", + "", "", "", ""; + + /* + * NOTE: The USB Hub on the DRC02 needs a reset signal to be + * pulled high in order to be detected by the USB Controller. + * This signal should be handled by USB power sequencing in + * order to reset the Hub when USB bus is powered down, but + * so far there is no such functionality. + */ + usb-hub { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c5 { /* TP7/TP8 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&sdmmc3 { + /* + * On DRC02, the SoM does not have SDIO WiFi. The pins + * are used for on-board microSD slot instead. + */ + /delete-property/broken-cd; + cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + cs-gpios = <&gpioz 3 0>; + /* Use PIO for the display */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; /* Enable once there is display driver */ + /* + * Note: PF3/GPIO_A , PD6/GPIO_B , PG0/GPIO_C , PC6/GPIO_E are + * also connected to the display board connector. + */ +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +/* + * Note: PI3 is UART1_RTS and PI5 is UART1_CTS on DRC02 (uart4 of STM32MP1), + * however the STM32MP1 pinmux cannot map them to UART4 . + */ + +&uart8 { /* RS485 */ + linux,rs485-enabled-at-boot-time; + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 7c4bd615b311..5dff24e39af8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -11,7 +11,6 @@ serial0 = &uart4; serial1 = &usart3; serial2 = &uart8; - ethernet0 = ðernet0; }; chosen { @@ -26,23 +25,13 @@ display_bl: display-bl { compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; status = "okay"; }; - ethernet_vio: vioregulator { - compatible = "regulator-fixed"; - regulator-name = "vio"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; - regulator-always-on; - regulator-boot-on; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #size-cells = <0>; @@ -141,28 +130,6 @@ status = "okay"; }; -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rmii"; - max-speed = <100>; - phy-handle = <&phy0>; - st,eth-ref-clk-sel; - phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@1 { - reg = <1>; - }; - }; -}; - &i2c2 { /* Header X22 */ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -304,7 +271,8 @@ &uart8 { pinctrl-names = "default"; - pinctrl-0 = <&uart8_pins_a>; + pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>; + uart-has-rtscts; status = "okay"; }; @@ -314,9 +282,12 @@ }; &usbotg_hs { - dr_mode = "peripheral"; - phys = <&usbphyc_port1 0>; + dr_mode = "otg"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index ba905196fb54..b4b52cf634af 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -9,6 +9,10 @@ #include <dt-bindings/mfd/st,stpmic1.h> / { + aliases { + ethernet0 = ðernet0; + }; + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x40000000>; @@ -55,6 +59,16 @@ no-map; }; }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + }; }; &adc { @@ -94,6 +108,28 @@ status = "okay"; }; +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + st,eth-ref-clk-sel; + phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; @@ -249,7 +285,7 @@ compatible = "ti,tsc2004"; reg = <0x49>; vio-supply = <&v3v3>; - interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpioh 15 IRQ_TYPE_EDGE_FALLING>; }; eeprom@50 { @@ -285,8 +321,8 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 930202742a3f..ec02cee1dd9b 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -295,9 +295,9 @@ &sdmmc2 { pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; - pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>; - pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>; bus-width = <8>; mmc-ddr-1_8v; no-sd; @@ -351,6 +351,7 @@ label = "LS-UART0"; pinctrl-names = "default"; pinctrl-0 = <&uart7_pins_a>; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 8692b11a83c3..af8ab736fd3c 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -133,6 +144,20 @@ status = "okay"; }; +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index 3d78169cdeed..a1953b2872d0 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -194,8 +194,8 @@ "Headphone", "Headphone Jack"; /* Board level routing. First 2 routes copied from SoC level */ simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "HP", "HPCOM", "Headphone Jack", "HP", "MIC1", "Microphone Jack", diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index cfd3858afb3e..c458f5fb124f 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -189,8 +189,8 @@ simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right"; + "Left DAC", "DACL", + "Right DAC", "DACR"; status = "disabled"; simple-audio-card,cpu { diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index ea15073f0c79..2fc62ef0cb3e 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -164,6 +164,10 @@ #include "axp22x.dtsi" +&ir0 { + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index b782041e0e04..7907569e7b5c 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -190,6 +190,29 @@ }; }; + syscon: system-control@1c00000 { + compatible = "allwinner,sun8i-r40-system-control", + "allwinner,sun4i-a10-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-r40-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -198,6 +221,18 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-r40-dma", + "allwinner,sun50i-a64-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + dma-channels = <16>; + dma-requests = <31>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + spi0: spi@1c05000 { compatible = "allwinner,sun8i-r40-spi", "allwinner,sun8i-h3-spi"; @@ -238,6 +273,17 @@ status = "disabled"; }; + video-codec@1c0e000 { + compatible = "allwinner,sun8i-r40-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-r40-mmc", "allwinner,sun50i-a64-mmc"; @@ -501,6 +547,16 @@ function = "i2c4"; }; + ir0_pins: ir0-pins { + pins = "PB4"; + function = "ir0"; + }; + + ir1_pins: ir1-pins { + pins = "PB23"; + function = "ir1"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -579,6 +635,32 @@ clocks = <&osc24M>; }; + ir0: ir@1c21800 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21800 0x400>; + pinctrl-0 = <&ir0_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>; + clock-names = "apb", "ir"; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_IR0>; + status = "disabled"; + }; + + ir1: ir@1c21c00 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21c00 0x400>; + pinctrl-0 = <&ir1_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>; + clock-names = "apb", "ir"; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_IR1>; + status = "disabled"; + }; + ths: thermal-sensor@1c24c00 { compatible = "allwinner,sun8i-r40-ths"; reg = <0x01c24c00 0x100>; @@ -743,6 +825,28 @@ #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun8i-r40-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + }; + gmac: ethernet@1c50000 { compatible = "allwinner,sun8i-r40-gmac"; syscon = <&ccu>; diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts new file mode 100644 index 000000000000..9bab6b7f4014 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2019 Icenowy Zheng <icenowy@aosc.io> + */ + +/dts-v1/; +#include "sun8i-v3.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "PineCube IP Camera"; + compatible = "pine64,pinecube", "allwinner,sun8i-s3"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led1 { + label = "pine64:ir:led1"; + gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ + }; + + led2 { + label = "pine64:ir:led2"; + gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */ + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_wifi: vcc-wifi { + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */ + vin-supply = <®_dcdc3>; + startup-delay-us = <200000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */ + post-power-on-delay-ms = <200>; + }; +}; + +&csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&csi1_8bit_pins>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + csi1_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp203", + "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pe_pins>; + status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi1_mclk_pin>; + clocks = <&ccu CLK_CSI1_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_ldo3>; + DOVDD-supply = <®_ldo3>; + DVDD-supply = <®_ldo4>; + reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */ + powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi1_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-200 { + label = "Setup"; + linux,code = <KEY_SETUP>; + channel = <0>; + voltage = <190000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_dcdc3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc_wifi>; + vqmmc-supply = <®_dcdc3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&pio { + vcc-pd-supply = <®_dcdc3>; + vcc-pe-supply = <®_ldo3>; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-sys-cpu-ephy"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-dovdd-2v8-csi"; + regulator-soft-start; + regulator-ramp-delay = <1600>; +}; + +®_ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-1v8-csi"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi index 6ae8645ade50..ca4672ed2e02 100644 --- a/arch/arm/boot/dts/sun8i-v3.dtsi +++ b/arch/arm/boot/dts/sun8i-v3.dtsi @@ -9,6 +9,19 @@ compatible = "allwinner,sun8i-v3-ccu"; }; +&emac { + /delete-property/ phy-handle; + /delete-property/ phy-mode; +}; + +&mdio_mux { + external_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + &pio { compatible = "allwinner,sun8i-v3-pinctrl"; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index e5312869c0d2..0c7341676921 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -43,12 +43,28 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-v3s-ccu.h> #include <dt-bindings/reset/sun8i-v3s-ccu.h> +#include <dt-bindings/clock/sun8i-de2.h> / { #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&gic>; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer-lcd { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "mixer0-lcd0"; + clocks = <&display_clocks CLK_MIXER0>, + <&ccu CLK_TCON0>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -138,6 +154,15 @@ }; }; + syscon: system-control@1c00000 { + compatible = "allwinner,sun8i-v3s-system-control", + "allwinner,sun8i-h3-system-control"; + reg = <0x01c00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-v3s-tcon"; reg = <0x01c0c000 0x1000>; @@ -234,6 +259,17 @@ #size-cells = <0>; }; + crypto@1c15000 { + compatible = "allwinner,sun8i-v3s-crypto", + "allwinner,sun8i-a33-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_CE>; + reset-names = "ahb"; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x0400>; @@ -292,16 +328,41 @@ interrupt-controller; #interrupt-cells = <3>; + /omit-if-no-ref/ + csi1_8bit_pins: csi1-8bit-pins { + pins = "PE0", "PE2", "PE3", "PE8", "PE9", + "PE10", "PE11", "PE12", "PE13", "PE14", + "PE15"; + function = "csi"; + }; + + /omit-if-no-ref/ + csi1_mclk_pin: csi1-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + i2c0_pins: i2c0-pins { pins = "PB6", "PB7"; function = "i2c0"; }; + /omit-if-no-ref/ + i2c1_pe_pins: i2c1-pe-pins { + pins = "PE21", "PE22"; + function = "i2c1"; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; }; + uart2_pins: uart2-pins { + pins = "PB0", "PB1"; + function = "uart2"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -377,6 +438,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; status = "disabled"; }; @@ -404,6 +467,49 @@ #size-cells = <0>; }; + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-v3s-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio_mux: mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + /* Only one MDIO is usable at the time */ + internal_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + }; + }; + spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; @@ -418,6 +524,18 @@ #size-cells = <0>; }; + csi1: camera@1cb4000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb4000 0x3000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index 54fd522badfc..d584da314500 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -51,7 +51,7 @@ }; }; - l2cc: l2-cache-controller@20100000 { + l2cc: cache-controller@20100000 { compatible = "arm,pl310-cache"; reg = <0x20100000 0x1000>; cache-level = <2>; diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index 2d683c9a1a5d..a0b829738e8f 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -14,6 +14,10 @@ compatible = "acer,picasso", "nvidia,tegra20"; aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc3; /* MicroSD */ + mmc2 = &sdmmc1; /* WiFi */ + rtc0 = &pmic; rtc1 = "/rtc@7000e000"; @@ -314,16 +318,24 @@ nvidia,pins = "drive_ddc", "drive_vi1", "drive_sdio1"; + nvidia,pull-up-strength = <31>; + nvidia,pull-down-strength = <31>; nvidia,schmitt = <TEGRA_PIN_ENABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; }; drive_dbg { nvidia,pins = "drive_dbg", "drive_vi2", "drive_at1", "drive_ao1"; + nvidia,pull-up-strength = <31>; + nvidia,pull-down-strength = <31>; nvidia,schmitt = <TEGRA_PIN_ENABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; }; @@ -431,8 +443,6 @@ compatible = "atmel,maxtouch"; reg = <0x4c>; - atmel,cfg_name = "maxtouch-acer-iconia-tab-a500.cfg"; - interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>; @@ -720,13 +730,17 @@ power-off-delay-us = <300>; }; - mmc@c8000000 { + sdmmc1: mmc@c8000000 { status = "okay"; #address-cells = <1>; #size-cells = <0>; - max-frequency = <25000000>; + assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>; + assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>; + assigned-clock-rates = <50000000>; + + max-frequency = <50000000>; keep-power-in-suspend; bus-width = <4>; non-removable; @@ -745,7 +759,7 @@ }; }; - mmc@c8000400 { + sdmmc3: mmc@c8000400 { status = "okay"; bus-width = <4>; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; @@ -754,7 +768,7 @@ vqmmc-supply = <&vdd_3v3_sys>; }; - mmc@c8000600 { + sdmmc4: mmc@c8000600 { status = "okay"; bus-width = <8>; vmmc-supply = <&vcore_emmc>; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index 3922517145e7..88ca03f57b3b 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -2,6 +2,7 @@ #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/power/summit,smb347-charger.h> #include <dt-bindings/thermal/thermal.h> #include "tegra30.dtsi" @@ -10,6 +11,9 @@ / { aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc3; /* WiFi */ + rtc0 = &pmic; rtc1 = "/rtc@7000e000"; @@ -836,6 +840,24 @@ i2c@7000c400 { clock-frequency = <400000>; status = "okay"; + + touchscreen@10 { + compatible ="elan,ektf3624"; + reg = <0x10>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>; + + vcc33-supply = <&vcc_3v3_ts>; + vccio-supply = <&vcc_3v3_ts>; + + touchscreen-size-x = <2112>; + touchscreen-size-y = <1280>; + touchscreen-swapped-x-y; + touchscreen-inverted-x; + }; }; i2c@7000c500 { @@ -901,9 +923,24 @@ #thermal-sensor-cells = <1>; }; - battery@55 { + fuel-gauge@55 { compatible = "ti,bq27541"; reg = <0x55>; + power-supplies = <&power_supply>; + monitored-battery = <&battery_cell>; + }; + + power_supply: charger@6a { + compatible = "summit,smb347"; + reg = <0x6a>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>; + + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>; + summit,enable-usb-charging; + + monitored-battery = <&battery_cell>; }; }; @@ -936,12 +973,17 @@ power-off-delay-us = <300>; }; - mmc@78000400 { + sdmmc3: mmc@78000400 { status = "okay"; #address-cells = <1>; #size-cells = <0>; + assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>; + assigned-clock-rates = <50000000>; + + max-frequency = <50000000>; keep-power-in-suspend; bus-width = <4>; non-removable; @@ -960,7 +1002,7 @@ }; }; - mmc@78000600 { + sdmmc4: mmc@78000600 { status = "okay"; bus-width = <8>; vmmc-supply = <&vcore_emmc>; @@ -993,6 +1035,12 @@ default-brightness-level = <15>; }; + battery_cell: battery-cell { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <1800000>; + operating-range-celsius = <0 45>; + }; + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ clk32k_in: clock@0 { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi index dd6957b20772..70e5635c78ed 100644 --- a/arch/arm/boot/dts/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -10,7 +10,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 2820635952e3..62b7d9f9a926 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -15,7 +15,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts index ec8cd86b260d..6cfa83921ac2 100644 --- a/arch/arm/boot/dts/usb_a9260.dts +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -16,7 +16,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index e7a705fddda9..8a0cfbfd0c45 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -15,7 +15,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi index adbe75024739..7d10b36db1ee 100644 --- a/arch/arm/boot/dts/usb_a9g20_common.dtsi +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -14,7 +14,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index a88ee5294d35..4f7220b11f2d 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -280,7 +280,7 @@ reg = <0x0f0000 0x1000>; interrupts = <0>; clocks = <&v2m_refclk32khz>, <&smbclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; v2m_timer01: timer@110000 { diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 5e48b641068a..2ac41ed3a57c 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -198,7 +198,7 @@ reg = <0x0f000 0x1000>; interrupts = <0>; clocks = <&v2m_refclk32khz>, <&smbclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; v2m_timer01: timer@11000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index f82fa34c90be..e63c5c0bfb43 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -87,8 +87,8 @@ status = "disabled"; reg = <0 0x2b060000 0 0x1000>; interrupts = <0 98 4>; - clocks = <&sys_pll>; - clock-names = "apb_pclk"; + clocks = <&sys_pll>, <&sys_pll>; + clock-names = "wdog_clk", "apb_pclk"; }; gic: interrupt-controller@2c001000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 3ac95a179452..012d40a7228c 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -128,7 +128,7 @@ reg = <0 0x2a490000 0 0x1000>; interrupts = <0 98 4>; clocks = <&oscclk6a>, <&oscclk6a>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; hdlcd@2b000000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 623246f37448..4c5847955856 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -122,8 +122,8 @@ reg = <0x100e4000 0x1000>; interrupts = <0 48 4>, <0 49 4>; - clocks = <&oscclk2>, <&oscclk2>; - clock-names = "timclk", "apb_pclk"; + clocks = <&oscclk2>, <&oscclk2>, <&oscclk2>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -132,7 +132,7 @@ reg = <0x100e5000 0x1000>; interrupts = <0 51 4>; clocks = <&oscclk2>, <&oscclk2>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; scu@1e000000 { diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 64e0e9509226..96495d965163 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -172,7 +172,6 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; @@ -226,6 +225,7 @@ compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; + #gpio-cells = <2>; }; lm75@48 { @@ -356,7 +356,6 @@ pinctrl_switch: switch-grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x3061 - VF610_PAD_PTE2__GPIO_107 0x1042 >; }; diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 9e5187ba3fa6..6c6ec46fd015 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -129,7 +129,6 @@ pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -326,7 +325,6 @@ pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index 569614b08f04..73fdace4cb42 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -118,7 +118,6 @@ pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -293,7 +292,6 @@ pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index b6b0f302b7b4..fe600ab2e4bd 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -143,7 +143,6 @@ pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -333,7 +332,6 @@ pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi index afd98de029be..f378c661b3bf 100644 --- a/arch/arm/boot/dts/zx296702.dtsi +++ b/arch/arm/boot/dts/zx296702.dtsi @@ -58,7 +58,7 @@ clocks = <&topclk ZX296702_A9_PERIPHCLK>; }; - l2cc: l2-cache-controller@c00000 { + l2cc: cache-controller@c00000 { compatible = "arm,pl310-cache"; reg = <0x00c00000 0x1000>; cache-unified; diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index d235b27cf372..6f2494dd6d60 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -299,6 +299,13 @@ config ARCH_VEXPRESS This enables support for the ARMv8 software model (Versatile Express). +config ARCH_VISCONTI + bool "Toshiba Visconti SoC Family" + select PINCTRL + select PINCTRL_VISCONTI + help + This enables support for Toshiba Visconti SoCs Family. + config ARCH_VULCAN def_bool n diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 270e8aabbac8..9b1170658d60 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -27,5 +27,6 @@ subdir-y += socionext subdir-y += sprd subdir-y += synaptics subdir-y += ti +subdir-y += toshiba subdir-y += xilinx subdir-y += zte diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi index 2006ad5424fa..2c78caebf515 100644 --- a/arch/arm64/boot/dts/actions/s700.dtsi +++ b/arch/arm64/boot/dts/actions/s700.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/actions,s700-cmu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/owl-s700-powergate.h> #include <dt-bindings/reset/actions,s700-reset.h> / { @@ -231,7 +232,7 @@ pinctrl: pinctrl@e01b0000 { compatible = "actions,s700-pinctrl"; - reg = <0x0 0xe01b0000 0x0 0x1000>; + reg = <0x0 0xe01b0000 0x0 0x100>; clocks = <&cmu CLK_GPIO>; gpio-controller; gpio-ranges = <&pinctrl 0 0 136>; @@ -244,5 +245,19 @@ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; }; + + dma: dma-controller@e0230000 { + compatible = "actions,s700-dma"; + reg = <0x0 0xe0230000 0x0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <10>; + dma-requests = <44>; + clocks = <&cmu CLK_DMAC>; + power-domains = <&sps S700_PD_DMA>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 916d10d5b87c..211d1e9d4701 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts new file mode 100644 index 000000000000..d34c2bb1079f --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com> + */ + +/dts-v1/; + +#include "sun50i-a100.dtsi" + +/{ + model = "Allwinner A100 Perf1"; + compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pio { + vcc-pb-supply = <®_dcdc1>; + vcc-pc-supply = <®_eldo1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_dldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; + vcc-ph-supply = <®_dcdc1>; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <®_aldo3>; + */ +}; + +&r_i2c0 { + status = "okay"; + + axp803: pmic@34 { + compatible = "x-powers,axp803"; + reg = <0x34>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ + }; +}; + +#include "axp803.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dram-1"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-pl"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io-usb-pd-emmc-nand-card"; +}; + +®_dcdc2 { + regulator-always-on; + /* + * FIXME: update min and max before support dvfs. + */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd-sys-usb-dram"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram-2"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pg-dcxo-wifi"; +}; + +®_dldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe-csi"; +}; + +®_dldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ldo-avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avcc-csi"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pc-lvds-csi-efuse-emmc-nand"; +}; + +®_eldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi"; +}; + +®_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-mipi-lcd"; +}; + +®_fldo1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus-usb"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ctp"; + status = "okay"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi new file mode 100644 index 000000000000..cc321c04f121 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com> + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun50i-a100-ccu.h> +#include <dt-bindings/clock/sun50i-a100-r-ccu.h> +#include <dt-bindings/reset/sun50i-a100-ccu.h> +#include <dt-bindings/reset/sun50i-a100-r-ccu.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + dcxo24M: dcxo24M-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "dcxo24M"; + #clock-cells = <0>; + }; + + iosc: internal-osc-clk { + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; + #clock-cells = <0>; + }; + + osc32k: osc32k-clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x3fffffff>; + + ccu: clock@3001000 { + compatible = "allwinner,sun50i-a100-ccu"; + reg = <0x03001000 0x1000>; + clocks = <&dcxo24M>, <&osc32k>, <&iosc>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, <0x03022000 0x2000>, + <0x03024000 0x2000>, <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + efuse@3006000 { + compatible = "allwinner,sun50i-a100-sid", + "allwinner,sun50i-a64-sid"; + reg = <0x03006000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: calib@14 { + reg = <0x14 8>; + }; + }; + + pio: pinctrl@300b000 { + compatible = "allwinner,sun50i-a100-pinctrl"; + reg = <0x0300b000 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + uart0_pb_pins: uart0-pb-pins { + pins = "PB9", "PB10"; + function = "uart0"; + }; + }; + + uart0: serial@5000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@5000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@5000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@5000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@5001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05001000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + + i2c0: i2c@5002000 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@5002400 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@5002800 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002800 0x400>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@5002c00 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002c00 0x400>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-a100-ths"; + reg = <0x05070400 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + + r_ccu: clock@7010000 { + compatible = "allwinner,sun50i-a100-r-ccu"; + reg = <0x07010000 0x300>; + clocks = <&dcxo24M>, <&osc32k>, <&iosc>, + <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_intc: interrupt-controller@7010320 { + compatible = "allwinner,sun50i-a100-nmi", + "allwinner,sun9i-a80-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x07010320 0xc>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun50i-a100-r-pinctrl"; + reg = <0x07022000 0x400>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + r_i2c0_pins: r-i2c0-pins { + pins = "PL0", "PL1"; + function = "s_i2c0"; + }; + + r_i2c1_pins: r-i2c1-pins { + pins = "PL8", "PL9"; + function = "s_i2c1"; + }; + }; + + r_uart: serial@7080000 { + compatible = "snps,dw-apb-uart"; + reg = <0x07080000 0x400>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&r_ccu CLK_R_APB2_UART>; + resets = <&r_ccu RST_R_APB2_UART>; + status = "disabled"; + }; + + r_i2c0: i2c@7081400 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081400 0x400>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB2_I2C0>; + resets = <&r_ccu RST_R_APB2_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + r_i2c1: i2c@7081800 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081800 0x400>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB2_I2C1>; + resets = <&r_ccu RST_R_APB2_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + thermal-zones { + cpu-thermal-zone { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + ddr-thermal-zone { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; + + gpu-thermal-zone { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 883f217efb81..3ea5182ca489 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -331,10 +331,10 @@ "Microphone", "Microphone Jack", "Microphone", "Onboard Microphone"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "MIC2", "Microphone Jack", "Onboard Microphone", "MBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index fde9c7a99b17..d894ec5fa8a1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -330,10 +330,10 @@ "Microphone", "Microphone Jack", "Microphone", "Onboard Microphone"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "MIC2", "Microphone Jack", "Onboard Microphone", "MBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 2165f238af13..329cf276561e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -261,11 +261,11 @@ simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "MIC2", "Microphone Jack"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 64b1c54f87c0..896f34fd9fc3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -374,15 +374,15 @@ "Headphone", "Headphone Jack", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone Left", "MBIAS", "MIC1", "Internal Microphone Left", "Internal Microphone Right", "HBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 25150aba749d..5780713b0dba 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -392,10 +392,10 @@ "Internal Speaker", "Speaker Amp OUTR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone", "MBIAS", "MIC1", "Internal Microphone", "Headset Microphone", "HBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts index dc4ab6b434f9..3ab0f0347bc9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts @@ -421,15 +421,15 @@ "Headphone", "Headphone Jack", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone Left", "MBIAS", "MIC1", "Internal Microphone Left", "Internal Microphone Right", "HBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 2f6ea9f3f6a2..9ebb9e07fae3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -159,11 +159,11 @@ simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "MIC2", "Microphone Jack"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index f5df5f705b72..a1864a89fb89 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -340,10 +340,10 @@ "Microphone", "Internal Microphone", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 8dfbcd144072..dc238814013c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -51,7 +51,7 @@ reg = <0>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -62,7 +62,7 @@ reg = <1>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -73,7 +73,7 @@ reg = <2>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -84,7 +84,7 @@ reg = <3>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -139,10 +139,10 @@ simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC"; + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC"; status = "disabled"; cpudai: simple-audio-card,cpu { @@ -157,6 +157,7 @@ timer { compatible = "arm,armv8-timer"; allwinner,erratum-unknown1; + arm,no-tick-in-suspend; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 14 @@ -860,7 +861,8 @@ codec: codec@1c22e00 { #sound-dai-cells = <0>; - compatible = "allwinner,sun8i-a33-codec"; + compatible = "allwinner,sun50i-a64-codec", + "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x600>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 6c6053a18413..10489e508695 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -67,6 +67,7 @@ timer { compatible = "arm,armv8-timer"; + arm,no-tick-in-suspend; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 9ce78a7b117d..28c77d6872f6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -90,6 +90,7 @@ timer { compatible = "arm,armv8-timer"; + arm,no-tick-in-suspend; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 14 diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index a6fb01c7ab34..0f893984c256 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -145,8 +145,8 @@ mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; - clocks = <&clkmgr STRATIX10_EMAC0_CLK>; - clock-names = "stmmaceth"; + clocks = <&clkmgr STRATIX10_EMAC0_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>; + clock-names = "stmmaceth", "ptp_ref"; tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; @@ -163,8 +163,8 @@ mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; - clocks = <&clkmgr STRATIX10_EMAC1_CLK>; - clock-names = "stmmaceth"; + clocks = <&clkmgr STRATIX10_EMAC1_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>; + clock-names = "stmmaceth", "ptp_ref"; tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; @@ -181,8 +181,8 @@ mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; - clocks = <&clkmgr STRATIX10_EMAC2_CLK>; - clock-names = "stmmaceth"; + clocks = <&clkmgr STRATIX10_EMAC2_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>; + clock-names = "stmmaceth", "ptp_ref"; tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi index d5e7e2bb4e6c..4eb2cd14e00b 100644 --- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi +++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi @@ -113,7 +113,7 @@ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; }; - gic: gic@f0100000 { + gic: interrupt-controller@f0200000 { compatible = "arm,gic-v3"; reg = <0x0 0xf0200000 0x0 0x10000>, /* GIC Dist */ <0x0 0xf0280000 0x0 0x200000>, /* GICR */ diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 4e2239ffcaa5..ced03946314f 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb @@ -24,6 +25,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi index 224c890d32d3..f42cf4b8af2d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi @@ -5,8 +5,6 @@ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> */ -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - / { model = "Khadas VIM3"; @@ -47,69 +45,6 @@ regulator-boot-on; regulator-always-on; }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "G12B-KHADAS-VIM3"; - audio-aux-devs = <&tdmout_a>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; }; &cpu0 { @@ -154,18 +89,6 @@ clock-latency = <50000>; }; -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - &pwm_ab { pinctrl-0 = <&pwm_a_e_pins>; pinctrl-names = "default"; @@ -182,14 +105,3 @@ status = "okay"; }; -&tdmif_a { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts new file mode 100644 index 000000000000..5de2815ba99d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */ +#include "meson-g12b-a311d.dtsi" +#include "meson-g12b-odroid-n2.dtsi" + +/ { + compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b"; + model = "Hardkernel ODROID-N2Plus"; +}; + +&vddcpu_a { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwms = <&pwm_AO_cd 1 1500 0>; +}; + +&vddcpu_b { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwms = <&pwm_AO_cd 1 1500 0>; +}; + diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 34fffa6d859d..a198a91259ec 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -7,625 +7,9 @@ /dts-v1/; #include "meson-g12b-s922x.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-toacodec.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> +#include "meson-g12b-odroid-n2.dtsi" / { compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b"; model = "Hardkernel ODROID-N2"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - dioo2133: audio-amplifier-0 { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - VCC-supply = <&vcc_5v>; - sound-name-prefix = "U19"; - status = "okay"; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - leds { - compatible = "gpio-leds"; - - blue { - label = "n2:blue"; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * Silergy SY8120B1ABC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - hub_5v: regulator-hub_5v { - compatible = "regulator-fixed"; - regulator-name = "HUB_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the Hub CHIPENABLE, LOW sets low power state */ - gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "G12B-ODROID-N2"; - audio-widgets = "Line", "Lineout"; - audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, - <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, - <&dioo2133>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TDMOUT_C IN 0", "FRDDR_A OUT 2", - "TDMOUT_C IN 1", "FRDDR_B OUT 2", - "TDMOUT_C IN 2", "FRDDR_C OUT 2", - "TDM_C Playback", "TDMOUT_C OUT", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 4", "TDM_B Loopback", - "TDMIN_C IN 4", "TDM_B Loopback", - "TDMIN_LB IN 1", "TDM_B Loopback", - "TDMIN_A IN 5", "TDM_C Loopback", - "TDMIN_B IN 5", "TDM_C Loopback", - "TDMIN_C IN 5", "TDM_C Loopback", - "TDMIN_LB IN 2", "TDM_C Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT", - "TODDR_A IN 2", "TDMIN_C OUT", - "TODDR_B IN 2", "TDMIN_C OUT", - "TODDR_C IN 2", "TDMIN_C OUT", - "TODDR_A IN 6", "TDMIN_LB OUT", - "TODDR_B IN 6", "TDMIN_LB OUT", - "TODDR_C IN 6", "TDMIN_LB OUT", - "U19 INL", "ACODEC LOLP", - "U19 INR", "ACODEC LORP", - "Lineout", "U19 OUTL", - "Lineout", "U19 OUTR"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-6 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_B>; - }; - }; - - /* i2s jack output interface */ - dai-link-7 { - sound-dai = <&tdmif_c>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_C>; - }; - }; - - /* hdmi glue */ - dai-link-8 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - - /* acodec glue */ - dai-link-9 { - sound-dai = <&toacodec TOACODEC_OUT>; - - codec { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddao_1v8>; - status = "okay"; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - reset-assert-us = <10000>; - reset-deassert-us = <30000>; - reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&gpio { - /* - * WARNING: The USB Hub on the Odroid-N2 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - usb-hub { - gpio-hog; - gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - linux,rc-map-name = "rc-odroid"; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; - -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -/* - * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins - * and eMMC Data 4 to 7 pins. - * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, - * and change bus-width to 4 then spifc can be enabled. - * The SW1 slide should also be set to the correct position. - */ -&spifc { - status = "disabled"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - mx25u64: spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25u6435f", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmif_c { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmin_c { - status = "okay"; -}; - -&tdmin_lb { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tdmout_c { - status = "okay"; -}; - -&toacodec { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - -&usb2_phy1 { - /* Enable the hub which is connected to this port */ - phy-supply = <&hub_5v>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi new file mode 100644 index 000000000000..6982632ae646 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -0,0 +1,625 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + dioo2133: audio-amplifier-0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + VCC-supply = <&vcc_5v>; + sound-name-prefix = "U19"; + status = "okay"; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "n2:blue"; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8120B1ABC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + hub_5v: regulator-hub_5v { + compatible = "regulator-fixed"; + regulator-name = "HUB_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the Hub CHIPENABLE, LOW sets low power state */ + gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12B-ODROID-N2"; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, + <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, + <&dioo2133>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_LB IN 1", "TDM_B Loopback", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 5", "TDM_C Loopback", + "TDMIN_LB IN 2", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT", + "U19 INL", "ACODEC LOLP", + "U19 INR", "ACODEC LORP", + "Lineout", "U19 OUTL", + "Lineout", "U19 OUTR"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-6 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; + }; + + /* i2s jack output interface */ + dai-link-7 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; + }; + + /* hdmi glue */ + dai-link-8 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + /* acodec glue */ + dai-link-9 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + AVDD-supply = <&vddao_1v8>; + status = "okay"; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + /* + * WARNING: The USB Hub on the Odroid-N2 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-odroid"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +/* + * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins + * and eMMC Data 4 to 7 pins. + * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, + * and change bus-width to 4 then spifc can be enabled. + * The SW1 slide should also be set to the correct position. + */ +&spifc { + status = "disabled"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + + mx25u64: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25u6435f", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + }; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + +&usb2_phy1 { + /* Enable the hub which is connected to this port */ + phy-supply = <&hub_5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts new file mode 100644 index 000000000000..675eaa87963e --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-aiu.h> + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x", + "amlogic,meson-gxl"; + model = "Libre Computer AML-S905X-CC V2"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK_ACTIVITY; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + + vcck: regulator-vcck { + compatible = "regulator-fixed"; + regulator-name = "VCCK"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vcc_card: regulator-vcc_card { + compatible = "regulator-fixed"; + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddio_ao3v3>; + + gpio = <&gpio GPIOCLK_1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc5v: regulator-vcc5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ao_5v>; + + gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; + }; + + vddio_ao3v3: regulator-vddio_ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + + vddio_card: regulator-vddio-card { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddio_ao3v3>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC 1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddio_ao3v3>; + regulator-always-on; + }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXL-LIBRETECH-S905X-CC-V2"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + + +&aiu { + status = "okay"; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + + +ðmac { + status = "okay"; +}; + +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + hdmi-supply = <&vcc5v>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* SD card */ +&sd_emmc_b { + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vcc_card>; + vqmmc-supply = <&vddio_card>; + + status = "okay"; +}; + +/* eMMC */ +&sd_emmc_c { + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddio_ao3v3>; + vqmmc-supply = <&vcc_1v8>; + + status = "okay"; +}; + +&spifc { + status = "okay"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + + nor_4u1: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <3000000>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; + +&usb2_phy0 { + pinctrl-names = "default"; + phy-supply = <&vcc5v>; +}; + +&usb2_phy1 { + phy-supply = <&vcc5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 94f75b446504..7b46555ac55a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { aliases { @@ -41,13 +42,13 @@ led-white { label = "vim3:white:sys"; - gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-red { label = "vim3:red"; - gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; }; }; @@ -161,6 +162,62 @@ }; }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12B-KHADAS-VIM3"; + audio-aux-devs = <&tdmout_a>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + wifi32k: wifi32k { compatible = "pwm-clock"; #clock-cells = <0>; @@ -169,6 +226,14 @@ }; }; +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + &cec_AO { pinctrl-0 = <&cec_ao_a_h_pins>; pinctrl-names = "default"; @@ -221,6 +286,18 @@ amlogic,tx-delay-ns = <2>; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -368,6 +445,19 @@ }; }; + +&tdmif_a { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + &uart_A { status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index 0da56c051a0e..4b517ca72059 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -32,69 +32,6 @@ regulator-boot-on; regulator-always-on; }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "SM1-KHADAS-VIM3L"; - audio-aux-devs = <&tdmout_a>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; }; &cpu0 { @@ -125,18 +62,6 @@ clock-latency = <50000>; }; -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - &pwm_AO_cd { pinctrl-0 = <&pwm_ao_d_e_pins>; pinctrl-names = "default"; @@ -174,14 +99,3 @@ }; */ -&tdmif_a { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index 3feb1881bbc2..a83c82c50e29 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -709,13 +709,13 @@ dwgpio: gpio@1c024000 { compatible = "snps,dw-apb-gpio"; reg = <0x0 0x1c024000 0x0 0x1000>; - reg-io-width = <4>; #address-cells = <1>; #size-cells = <0>; porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; + #gpio-cells = <2>; snps,nr-gpios = <32>; reg = <0>; }; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index 8c802d87e751..0f37e77f5459 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -825,13 +825,13 @@ dwgpio: gpio@1c024000 { compatible = "snps,dw-apb-gpio"; reg = <0x0 0x1c024000 0x0 0x1000>; - reg-io-width = <4>; #address-cells = <1>; #size-cells = <0>; porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; + #gpio-cells = <2>; snps,nr-gpios = <32>; reg = <0>; }; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index eeee51f1251b..40d95c58b55e 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -251,7 +251,7 @@ reg = <0x0f0000 0x10000>; interrupts = <7>; clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; v2m_timer01: timer@110000 { diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 001a0a3c7f66..4c4a381d2c75 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -195,7 +195,7 @@ reg = <0x0f0000 0x1000>; interrupts = <0>; clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; v2m_timer01: timer@110000 { diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 39802066232e..2cfeaf3b0a87 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -576,7 +576,7 @@ reg = <0x66090000 0x1000>; interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>, <&iprocslow>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; gpio_g: gpio@660a0000 { diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index a9b92e52d50e..43aa5e9c0020 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -151,7 +151,7 @@ }; &nand { - status = "ok"; + status = "okay"; nandcs@0 { compatible = "brcm,nandcs"; reg = <0>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 0098dfdef96c..b425b12c3ed2 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -438,7 +438,7 @@ reg = <0x000c0000 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; timeout-sec = <60>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 24aab3ea3f52..829fea23d4ab 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -87,8 +87,8 @@ i2c_max98504: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ - &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; + sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 74ac4ac75865..8eb4576da8f3 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1015,17 +1015,17 @@ }; syscon_disp: syscon@13b80000 { - compatible = "syscon"; + compatible = "samsung,exynos5433-sysreg", "syscon"; reg = <0x13b80000 0x1010>; }; syscon_cam0: syscon@120f0000 { - compatible = "syscon"; + compatible = "samsung,exynos5433-sysreg", "syscon"; reg = <0x120f0000 0x1020>; }; syscon_cam1: syscon@145f0000 { - compatible = "syscon"; + compatible = "samsung,exynos5433-sysreg", "syscon"; reg = <0x145f0000 0x1038>; }; @@ -1087,7 +1087,7 @@ operating-points-v2 = <&gpu_opp_table>; status = "disabled"; - gpu_opp_table: opp_table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-160000000 { @@ -1460,10 +1460,6 @@ <&cmu_peric CLK_SCLK_I2S1>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; #clock-cells = <1>; - samsung,supports-6ch; - samsung,supports-rstclr; - samsung,supports-tdm; - samsung,supports-low-rfs; #sound-dai-cells = <1>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 903c0eb61290..f8d59433af01 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -30,12 +30,17 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts index 9927b096d343..242f4b0cb344 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts @@ -87,7 +87,7 @@ status = "okay"; }; -&pcie { +&pcie1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index ff19ec415b60..6a2c09199047 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -1,8 +1,9 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Device Tree Include file for Freescale Layerscape-1012A family SoC. + * Device Tree Include file for NXP Layerscape-1012A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2019-2020 NXP * */ @@ -489,7 +490,7 @@ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; }; - pcie: pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls1012a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index 4b4cc6a1573d..d66d8b2c3d1a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -11,11 +11,29 @@ /dts-v1/; #include "fsl-ls1028a-kontron-sl28-var4.dts" +#include <dt-bindings/leds/common.h> / { model = "Kontron KBox A-230-LS"; compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a"; + + leds { + compatible = "gpio-leds"; + + alarm-led { + function = LED_FUNCTION_ALARM; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&sl28cpld_gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + power-led { + linux,default-trigger = "default-on"; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + gpios = <&sl28cpld_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + }; }; &enetc_mdio_pf3 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts index 0973a6a45217..c45d7b40e374 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts @@ -15,6 +15,15 @@ compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a"; + pwm-fan { + compatible = "pwm-fan"; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + pwms = <&sl28cpld_pwm0 0 4000000>; + cooling-levels = <1 128 192 255>; + }; + sound { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 852dad8d70ab..f46eb47cfa4d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -8,6 +8,9 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Kontron SMARC-sAL28"; @@ -22,6 +25,36 @@ spi1 = &dspi2; }; + buttons0 { + compatible = "gpio-keys"; + + power-button { + interrupts-extended = <&sl28cpld_intc + 4 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + label = "Power"; + }; + + sleep-button { + interrupts-extended = <&sl28cpld_intc + 5 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_SLEEP>; + label = "Sleep"; + }; + }; + + buttons1 { + compatible = "gpio-keys-polled"; + poll-interval = <200>; + + lid-switch { + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>; + label = "Lid"; + }; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -166,6 +199,107 @@ reg = <0x32>; }; + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + sl28cpld_pwm0: pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + sl28cpld_pwm1: pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + sl28cpld_gpio0: gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N", + "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N", + "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT", + "GPIO6_TACHIN", "GPIO7"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio1: gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "", "", "", ""; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio2: gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "LCD0 voltage enable", + "LCD0 backlight enable", + "eMMC reset", "LVDS bridge reset", + "LVDS bridge power-down", + "SDIO power enable", + "", ""; + }; + + sl28cpld_gpio3: gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "Power button", "Force recovery", "Sleep", + "Battery low", "Lid state", "Charging", + "Charger present", ""; + }; + + sl28cpld_intc: interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index e4f00c2b6608..13cdc958ba3e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -313,6 +313,10 @@ status = "okay"; }; +&lpuart0 { + status = "okay"; +}; + &sai1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 0efeb8fa773e..73e4f9466887 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Include file for NXP Layerscape-1028A family SoC. * - * Copyright 2018 NXP + * Copyright 2018-2020 NXP * * Harninder Rai <harninder.rai@nxp.com> * @@ -553,7 +553,7 @@ status = "disabled"; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls1028a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -580,7 +580,7 @@ status = "disabled"; }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,ls1028a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -722,14 +722,14 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; clocks = <&clockgen 4 15>, <&clockgen 4 15>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: watchdog@c010000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; clocks = <&clockgen 4 15>, <&clockgen 4 15>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; sai1: audio-controller@f100000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 5c2e370f6316..0464b8aa4bc4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -1,9 +1,9 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * Device Tree Include file for NXP Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. - * Copyright 2018 NXP + * Copyright 2018, 2020 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -814,7 +814,7 @@ interrupts = <0 160 0x4>; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls1043a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -840,7 +840,7 @@ status = "disabled"; }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,ls1043a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -866,7 +866,7 @@ status = "disabled"; }; - pcie@3600000 { + pcie3: pcie@3600000 { compatible = "fsl,ls1043a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 0246d975a206..1fa39bacff4b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -1,9 +1,9 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * Device Tree Include file for NXP Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. - * Copyright 2018 NXP + * Copyright 2018, 2020 NXP * * Mingkai Hu <mingkai.hu@nxp.com> */ @@ -718,7 +718,7 @@ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -744,7 +744,7 @@ status = "disabled"; }; - pcie_ep@3400000 { + pcie_ep1: pcie_ep@3400000 { compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; reg = <0x00 0x03400000 0x0 0x00100000 0x40 0x00000000 0x8 0x00000000>; @@ -754,7 +754,7 @@ status = "disabled"; }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -780,7 +780,7 @@ status = "disabled"; }; - pcie_ep@3500000 { + pcie_ep2: pcie_ep@3500000 { compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; reg = <0x00 0x03500000 0x0 0x00100000 0x48 0x00000000 0x8 0x00000000>; @@ -790,7 +790,7 @@ status = "disabled"; }; - pcie@3600000 { + pcie3: pcie@3600000 { compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -816,7 +816,7 @@ status = "disabled"; }; - pcie_ep@3600000 { + pcie_ep3: pcie_ep@3600000 { compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; reg = <0x00 0x03600000 0x0 0x00100000 0x50 0x00000000 0x8 0x00000000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 169f4742ae3b..ff5805206a28 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Include file for NXP Layerscape-1088A family SoC. * - * Copyright 2017 NXP + * Copyright 2017-2020 NXP * * Harninder Rai <harninder.rai@nxp.com> * @@ -130,19 +130,19 @@ }; thermal-zones { - cpu_thermal: cpu-thermal { + core-cluster { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; trips { - cpu_alert: cpu-alert { + core_cluster_alert: core-cluster-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu-crit { + core-cluster-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -151,7 +151,7 @@ cooling-maps { map0 { - trip = <&cpu_alert>; + trip = <&core_cluster_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -164,6 +164,20 @@ }; }; }; + + soc { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + soc-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; timer { @@ -210,45 +224,49 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; interrupts = <0 23 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000026 - 0x00000001 0x0000002d - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 + <0x00000000 0x00000023 + 0x00000001 0x0000002a + 0x00000002 0x00000030 + 0x00000003 0x00000037 + 0x00000004 0x0000003d + 0x00000005 0x00000044 + 0x00000006 0x0000004a + 0x00000007 0x00000051 + 0x00000008 0x00000057 + 0x00000009 0x0000005e + 0x0000000a 0x00000064 + 0x0000000b 0x0000006b /* Calibration data group 2 */ - 0x00010000 0x00000025 - 0x00010001 0x0000002c - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 + 0x00010000 0x00000022 + 0x00010001 0x0000002a + 0x00010002 0x00000032 + 0x00010003 0x0000003a + 0x00010004 0x00000042 + 0x00010005 0x0000004a + 0x00010006 0x00000052 + 0x00010007 0x0000005a + 0x00010008 0x00000062 + 0x00010009 0x0000006a /* Calibration data group 3 */ - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d + 0x00020000 0x00000021 + 0x00020001 0x0000002b + 0x00020002 0x00000035 + 0x00020003 0x00000040 + 0x00020004 0x0000004a + 0x00020005 0x00000054 + 0x00020006 0x0000005e /* Calibration data group 4 */ - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + 0x00030000 0x00000010 + 0x00030001 0x0000001c + 0x00030002 0x00000027 + 0x00030003 0x00000032 + 0x00030004 0x0000003e + 0x00030005 0x00000049 + 0x00030006 0x00000054 + 0x00030007 0x00000060>; little-endian; #thermal-sensor-cells = <1>; }; @@ -473,7 +491,7 @@ }; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -499,7 +517,7 @@ status = "disabled"; }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -525,7 +543,7 @@ status = "disabled"; }; - pcie@3600000 { + pcie3: pcie@3600000 { compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -657,57 +675,57 @@ cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: wdt@c010000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core2_watchdog: wdt@c020000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc020000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core3_watchdog: wdt@c030000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc030000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core0_watchdog: wdt@c100000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core1_watchdog: wdt@c110000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core2_watchdog: wdt@c120000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc120000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core3_watchdog: wdt@c130000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc130000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "wdog_clk", "apb_pclk"; }; fsl_mc: fsl-mc@80c000000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 41102dacc2e1..bf72918fe545 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -79,20 +79,62 @@ }; thermal-zones { - cpu_thermal: cpu-thermal { + ddr-controller1 { polling-delay-passive = <1000>; polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + trips { + ddr-ctrler1-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + ddr-controller2 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 2>; + + trips { + ddr-ctrler2-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + ddr-controller3 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 3>; + + trips { + ddr-ctrler3-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + core-cluster1 { + polling-delay-passive = <1000>; + polling-delay = <5000>; thermal-sensors = <&tmu 4>; trips { - cpu_alert: cpu-alert { - temperature = <75000>; + core_cluster1_alert: core-cluster1-alert { + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu-crit { - temperature = <85000>; + + core-cluster1-crit { + temperature = <95000>; hysteresis = <2000>; type = "critical"; }; @@ -100,14 +142,95 @@ cooling-maps { map0 { - trip = <&cpu_alert>; + trip = <&core_cluster1_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + core-cluster2 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 5>; + + trips { + core_cluster2_alert: core-cluster2-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core-cluster2-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster2_alert>; + cooling-device = <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + core-cluster3 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 6>; + + trips { + core_cluster3_alert: core-cluster3-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core-cluster3-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster3_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + core-cluster4 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 7>; + + trips { + core_cluster4_alert: core-cluster4-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core-cluster4-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster4_alert>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; @@ -231,56 +354,56 @@ compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: wdt@c010000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core0_watchdog: wdt@c100000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core1_watchdog: wdt@c110000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; cluster3_core0_watchdog: wdt@c200000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc200000 0x0 0x1000>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; cluster3_core1_watchdog: wdt@c210000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc210000 0x0 0x1000>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; cluster4_core0_watchdog: wdt@c300000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc300000 0x0 0x1000>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; cluster4_core1_watchdog: wdt@c310000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc310000 0x0 0x1000>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; + clock-names = "wdog_clk", "apb_pclk"; }; crypto: crypto@8000000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index d247e4228d60..83072da6f6c6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -1011,7 +1011,7 @@ status = "disabled"; }; - pcie@3400000 { + pcie1: pcie@3400000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -1039,7 +1039,7 @@ status = "disabled"; }; - pcie@3500000 { + pcie2: pcie@3500000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -1067,7 +1067,7 @@ status = "disabled"; }; - pcie@3600000 { + pcie3: pcie@3600000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x90 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -1095,7 +1095,7 @@ status = "disabled"; }; - pcie@3700000 { + pcie4: pcie@3700000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ 0x98 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -1123,7 +1123,7 @@ status = "disabled"; }; - pcie@3800000 { + pcie5: pcie@3800000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */ 0xa0 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -1151,7 +1151,7 @@ status = "disabled"; }; - pcie@3900000 { + pcie6: pcie@3900000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */ 0xa8 0x00000000 0x0 0x00002000>; /* configuration space */ diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index baa5f997d018..d6b9dedd168f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -10,19 +10,19 @@ led0 { label = "gen_led0"; gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>; - default-state = "none"; + default-state = "off"; }; led1 { label = "gen_led1"; gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>; - default-state = "none"; + default-state = "off"; }; led2 { label = "gen_led2"; gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>; - default-state = "none"; + default-state = "off"; }; led3 { @@ -70,7 +70,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_espi2>; - cs-gpios = <&gpio5 9 0>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; eeprom@0 { @@ -210,7 +210,7 @@ >; }; - pinctrl_pcal6414: pcal6414-gpio { + pinctrl_pcal6414: pcal6414-gpiogrp { fsl,pins = < MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 >; @@ -240,7 +240,7 @@ >; }; - pinctrl_usdhc2_gpio: usdhc2grpgpio { + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x41 MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 @@ -259,7 +259,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 @@ -271,7 +271,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index 94911b1707ef..6de86a4f0ec4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -74,12 +74,12 @@ reg = <0x4b>; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; regulators { buck1_reg: BUCK1 { - regulator-name = "BUCK1"; + regulator-name = "buck1"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; @@ -88,7 +88,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "BUCK2"; + regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; @@ -100,7 +100,7 @@ buck3_reg: BUCK3 { // BUCK5 in datasheet - regulator-name = "BUCK3"; + regulator-name = "buck3"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; regulator-boot-on; @@ -109,7 +109,7 @@ buck4_reg: BUCK4 { // BUCK6 in datasheet - regulator-name = "BUCK4"; + regulator-name = "buck4"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -118,7 +118,7 @@ buck5_reg: BUCK5 { // BUCK7 in datasheet - regulator-name = "BUCK5"; + regulator-name = "buck5"; regulator-min-microvolt = <1605000>; regulator-max-microvolt = <1995000>; regulator-boot-on; @@ -127,7 +127,7 @@ buck6_reg: BUCK6 { // BUCK8 in datasheet - regulator-name = "BUCK6"; + regulator-name = "buck6"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; @@ -135,7 +135,7 @@ }; ldo1_reg: LDO1 { - regulator-name = "LDO1"; + regulator-name = "ldo1"; regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -143,7 +143,7 @@ }; ldo2_reg: LDO2 { - regulator-name = "LDO2"; + regulator-name = "ldo2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; @@ -151,7 +151,7 @@ }; ldo3_reg: LDO3 { - regulator-name = "LDO3"; + regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -159,7 +159,7 @@ }; ldo4_reg: LDO4 { - regulator-name = "LDO4"; + regulator-name = "ldo4"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -167,7 +167,7 @@ }; ldo6_reg: LDO6 { - regulator-name = "LDO6"; + regulator-name = "ldo6"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -184,7 +184,7 @@ status = "okay"; eeprom@50 { - compatible = "microchip, at24c64d", "atmel,24c64"; + compatible = "microchip,24c64", "atmel,24c64"; pagesize = <32>; read-only; /* Manufacturing EEPROM programmed at factory */ reg = <0x50>; @@ -290,9 +290,9 @@ >; }; - pinctrl_pmic: pmicirq { + pinctrl_pmic: pmicirqgrp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 >; }; @@ -309,7 +309,7 @@ >; }; - pinctrl_usdhc1_gpio: usdhc1grpgpio { + pinctrl_usdhc1_gpio: usdhc1gpiogrp { fsl,pins = < MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 >; @@ -326,7 +326,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 @@ -337,7 +337,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 @@ -364,7 +364,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 @@ -380,7 +380,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts new file mode 100644 index 000000000000..6c079c0a3a48 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 NXP + */ + +/dts-v1/; + +#include "imx8mm-evk.dtsi" + +/ { + model = "FSL i.MX8MM DDR4 EVK with CYW43455 WIFI/BT board"; + compatible = "fsl,imx8mm-ddr4-evk", "fsl,imx8mm"; + + leds { + pinctrl-0 = <&pinctrl_gpio_led_2>; + + status { + gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE 0x00000096 + MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x00000096 + MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x00000096 + MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE 0x00000096 + MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x00000096 + MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x00000096 + MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x00000096 + MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x00000096 + MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x00000096 + MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x00000096 + MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x00000096 + MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x00000096 + MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x00000096 + MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x00000056 + MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x00000096 + MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x00000096 + >; + }; + + pinctrl_gpio_led_2: gpioled2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index 0f1d7f8aeac4..4e2820d19244 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -1,97 +1,20 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright 2019 NXP + * Copyright 2019-2020 NXP */ /dts-v1/; #include <dt-bindings/usb/pd.h> -#include "imx8mm.dtsi" +#include "imx8mm-evk.dtsi" / { model = "FSL i.MX8MM EVK board"; compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; - chosen { - stdout-path = &uart2; + aliases { + spi0 = &flexspi; }; - - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0 0x80000000>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_led>; - - status { - label = "status"; - gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - wm8524: audio-codec { - #sound-dai-cells = <0>; - compatible = "wlf,wm8524"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_wlf>; - wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; - }; - - sound-wm8524 { - compatible = "simple-audio-card"; - simple-audio-card,name = "wm8524-audio"; - simple-audio-card,format = "i2s"; - simple-audio-card,frame-master = <&cpudai>; - simple-audio-card,bitclock-master = <&cpudai>; - simple-audio-card,widgets = - "Line", "Left Line Out Jack", - "Line", "Right Line Out Jack"; - simple-audio-card,routing = - "Left Line Out Jack", "LINEVOUTL", - "Right Line Out Jack", "LINEVOUTR"; - - cpudai: simple-audio-card,cpu { - sound-dai = <&sai3>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - - simple-audio-card,codec { - sound-dai = <&wm8524>; - clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; - }; - }; -}; - -&A53_0 { - cpu-supply = <&buck2_reg>; -}; - -&A53_1 { - cpu-supply = <&buck2_reg>; -}; - -&A53_2 { - cpu-supply = <&buck2_reg>; -}; - -&A53_3 { - cpu-supply = <&buck2_reg>; }; &ddrc { @@ -114,238 +37,22 @@ }; }; -&fec1 { +&flexspi { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - fsl,magic-packet; + pinctrl-0 = <&pinctrl_flexspi>; status = "okay"; - mdio { + flash@0 { + reg = <0>; #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - pmic@4b { - compatible = "rohm,bd71847"; - reg = <0x4b>; - pinctrl-0 = <&pinctrl_pmic>; - interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; - rohm,reset-snvs-powered; - - regulators { - buck1_reg: BUCK1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <1250>; - }; - - buck2_reg: BUCK2 { - regulator-name = "BUCK2"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <1000000>; - rohm,dvs-idle-voltage = <900000>; - }; - - buck3_reg: BUCK3 { - // BUCK5 in datasheet - regulator-name = "BUCK3"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; - regulator-always-on; - }; - - buck4_reg: BUCK4 { - // BUCK6 in datasheet - regulator-name = "BUCK4"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - buck5_reg: BUCK5 { - // BUCK7 in datasheet - regulator-name = "BUCK5"; - regulator-min-microvolt = <1605000>; - regulator-max-microvolt = <1995000>; - regulator-boot-on; - regulator-always-on; - }; - - buck6_reg: BUCK6 { - // BUCK8 in datasheet - regulator-name = "BUCK6"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "LDO2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <900000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "LDO3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "LDO4"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "LDO6"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; -}; - -&i2c2 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - ptn5110: tcpc@50 { - compatible = "nxp,ptn5110"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_typec1>; - reg = <0x50>; - interrupt-parent = <&gpio2>; - interrupts = <11 8>; - status = "okay"; - - port { - typec1_dr_sw: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; - }; - - typec1_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - data-role = "dual"; - try-power-role = "sink"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(5000, 20000, 3000)>; - op-sink-microwatt = <15000000>; - self-powered; - }; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; }; }; -&i2c3 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - pca6416: gpio@20 { - compatible = "ti,tca6416"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&sai3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai3>; - assigned-clocks = <&clk IMX8MM_CLK_SAI3>; - assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; - assigned-clock-rates = <24576000>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "okay"; -}; - -&uart2 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - usb-role-switch; - status = "okay"; - - port { - usb1_drd_sw: endpoint { - remote-endpoint = <&typec1_dr_sw>; - }; - }; -}; - -&usdhc2 { - assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; - assigned-clock-rates = <200000000>; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - bus-width = <4>; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - &usdhc3 { assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; assigned-clock-rates = <400000000>; @@ -358,196 +65,64 @@ status = "okay"; }; -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - &iomuxc { - pinctrl-names = "default"; - - pinctrl_fec1: fec1grp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 - >; - }; - - pinctrl_gpio_led: gpioledgrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 - >; - }; - - pinctrl_gpio_wlf: gpiowlfgrp { + pinctrl_flexspi: flexspigrp { fsl,pins = < - MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 - MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 - MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 - >; - }; - - pinctrl_pmic: pmicirq { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 - >; - }; - - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { - fsl,pins = < - MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 - >; - }; - - pinctrl_sai3: sai3grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 - MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 - MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 - MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 - >; - }; - - pinctrl_typec1: typec1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 - MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 - >; - }; - - pinctrl_usdhc2_gpio: usdhc2grpgpio { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi new file mode 100644 index 000000000000..f305a530ff6f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -0,0 +1,474 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 NXP + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx8mm.dtsi" + +/ { + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_wlf>; + wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + }; + + sound-wm8524 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8524-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Line", "Left Line Out Jack", + "Line", "Right Line Out Jack"; + simple-audio-card,routing = + "Left Line Out Jack", "LINEVOUTL", + "Right Line Out Jack", "LINEVOUTR"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8524>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec1>; + reg = <0x50>; + interrupt-parent = <&gpio2>; + interrupts = <11 8>; + status = "okay"; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + + typec1_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_gpio_wlf: gpiowlfgrp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + + pinctrl_typec1: typec1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts new file mode 100644 index 000000000000..ac1fe1530ac7 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org> + */ + +/dts-v1/; + +#include "imx8mm-var-som.dtsi" + +/ { + model = "Variscite VAR-SOM-MX8MM Symphony evaluation board"; + compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm"; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_otg2_vbus>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + gpio-keys { + compatible = "gpio-keys"; + + back { + label = "Back"; + gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + home { + label = "Home"; + gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + menu { + label = "Menu"; + gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led { + label = "Heartbeat"; + gpios = <&pca9534 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +ðphy { + reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pca9534: gpio@20 { + compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9534>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + #gpio-cells = <2>; + wakeup-source; + + /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */ + usb3-sata-sel-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb3_sata_sel"; + }; + + som-vselect-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "som_vselect"; + }; + + enet-sel-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "enet_sel"; + }; + }; + + extcon_usbotg1: typec@3d { + compatible = "nxp,ptn5150"; + reg = <0x3d>; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ptn5150>; + status = "okay"; + }; +}; + +&i2c3 { + /* Capacitive touch controller */ + ft5x06_ts: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_captouch>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +/* Header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Header */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + disable-over-current; + extcon = <&extcon_usbotg1>, <&extcon_usbotg1>; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb_otg2_vbus>; + srp-disable; + hnp-disable; + adp-disable; + disable-over-current; + /delete-property/ usb-role-switch; + /* + * FIXME: having USB2 enabled hangs the boot just after: + * [ 1.943365] ci_hdrc ci_hdrc.1: EHCI Host Controller + * [ 1.948287] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 + * [ 1.971006] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 + * [ 1.977203] hub 1-0:1.0: USB hub found + * [ 1.980987] hub 1-0:1.0: 1 port detected + */ + status = "disabled"; +}; + +&pinctrl_fec1 { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ + >; +}; + +&iomuxc { + pinctrl_captouch: captouchgrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x16 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_pca9534: pca9534grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16 + >; + }; + + pinctrl_ptn5150: ptn5150grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16 + >; + }; + + pinctrl_reg_usb_otg2_vbus: regusbotg2vbusgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x16 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi new file mode 100644 index 000000000000..4107fe914d08 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi @@ -0,0 +1,561 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include "imx8mm.dtsi" + +/ { + model = "Variscite VAR-SOM-MX8MM module"; + compatible = "variscite,var-som-mx8mm", "fsl,imx8mm"; + + chosen { + stdout-path = &uart4; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_eth_phy>; + regulator-name = "eth_phy_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>, + <&gpio1 0 GPIO_ACTIVE_LOW>; + /delete-property/ dmas; + /delete-property/ dma-names; + status = "okay"; + + /* Resistive touch controller */ + touchscreen@0 { + reg = <0>; + compatible = "ti,ads7846"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restouch>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + spi-max-frequency = <1500000>; + pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + + ti,x-min = /bits/ 16 <125>; + touchscreen-size-x = /bits/ 16 <4008>; + ti,y-min = /bits/ 16 <282>; + touchscreen-size-y = /bits/ 16 <3864>; + ti,x-plate-ohms = /bits/ 16 <180>; + touchscreen-max-pressure = /bits/ 16 <255>; + touchscreen-average-samples = /bits/ 16 <10>; + ti,debounce-tol = /bits/ 16 <3>; + ti,debounce-rep = /bits/ 16 <1>; + ti,settle-delay-usec = /bits/ 16 <150>; + ti,keep-vref-on; + wakeup-source; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii"; + phy-handle = <ðphy>; + phy-supply = <®_eth_phy>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio2>; + /* + * The interrupt is not correct. It should be level low, + * however with internal pull up this causes IRQ storm. + */ + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + rohm,reset-snvs-powered; + + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-compatible = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + /* TODO: configure audio, as of now just put a placeholder */ + wm8904: codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + status = "disabled"; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* Bluetooth */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + uart-has-rtscts; + status = "okay"; +}; + +/* Console */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + usb-role-switch; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "otg"; + usb-role-switch; + status = "okay"; +}; + +/* WIFI */ +&usdhc1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <4>; + non-removable; + keep-power-in-suspend; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD */ +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x13 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x13 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x13 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x13 + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x13 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x41 + >; + }; + + pinctrl_reg_eth_phy: regethphygrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x41 + >; + }; + + pinctrl_restouch: restouchgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xc1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 76f040e4be5e..b83f400def8b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -854,7 +854,8 @@ reg = <0x30be0000 0x10000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, <&clk IMX8MM_CLK_ENET1_ROOT>, <&clk IMX8MM_CLK_ENET_TIMER>, diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index a1e5483dbbbe..46e76cf32b2f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -55,12 +55,12 @@ reg = <0x4b>; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; regulators { buck1_reg: BUCK1 { - regulator-name = "BUCK1"; + regulator-name = "buck1"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; @@ -69,7 +69,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "BUCK2"; + regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; @@ -79,14 +79,14 @@ buck3_reg: BUCK3 { // BUCK5 in datasheet - regulator-name = "BUCK3"; + regulator-name = "buck3"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; }; buck4_reg: BUCK4 { // BUCK6 in datasheet - regulator-name = "BUCK4"; + regulator-name = "buck4"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -95,7 +95,7 @@ buck5_reg: BUCK5 { // BUCK7 in datasheet - regulator-name = "BUCK5"; + regulator-name = "buck5"; regulator-min-microvolt = <1605000>; regulator-max-microvolt = <1995000>; regulator-boot-on; @@ -104,7 +104,7 @@ buck6_reg: BUCK6 { // BUCK8 in datasheet - regulator-name = "BUCK6"; + regulator-name = "buck6"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; @@ -112,7 +112,7 @@ }; ldo1_reg: LDO1 { - regulator-name = "LDO1"; + regulator-name = "ldo1"; regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -120,7 +120,7 @@ }; ldo2_reg: LDO2 { - regulator-name = "LDO2"; + regulator-name = "ldo2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; @@ -128,7 +128,7 @@ }; ldo3_reg: LDO3 { - regulator-name = "LDO3"; + regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -136,7 +136,7 @@ }; ldo4_reg: LDO4 { - regulator-name = "LDO4"; + regulator-name = "ldo4"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -144,7 +144,7 @@ }; ldo6_reg: LDO6 { - regulator-name = "LDO6"; + regulator-name = "ldo6"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -153,11 +153,3 @@ }; }; }; - -&iomuxc { - pinctrl_pmic: pmicirq { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 - >; - }; -}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts index b846526a8d8b..707d8486b4d8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -7,6 +7,7 @@ #include "imx8mn.dtsi" #include "imx8mn-evk.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "NXP i.MX8MNano EVK board"; @@ -19,7 +20,7 @@ reg = <0x25>; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; regulators { buck1: BUCK1{ diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 98f5324b1dbe..4aa0dbd578df 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -132,6 +132,8 @@ srp-disable; adp-disable; usb-role-switch; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; port { @@ -174,8 +176,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_fec1: fec1grp { fsl,pins = < MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 @@ -223,13 +223,13 @@ >; }; - pinctrl_pmic: pmicirq { + pinctrl_pmic: pmicirqgrp { fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 >; }; - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 >; @@ -248,7 +248,7 @@ >; }; - pinctrl_usdhc2_gpio: usdhc2grpgpio { + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 >; @@ -266,7 +266,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 @@ -278,7 +278,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 @@ -306,7 +306,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 @@ -322,7 +322,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts new file mode 100644 index 000000000000..f61c48776cf3 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019-2020 Variscite Ltd. + * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org> + */ + +/dts-v1/; + +#include "imx8mn-var-som.dtsi" + +/ { + model = "Variscite VAR-SOM-MX8MN Symphony evaluation board"; + compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn"; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + gpio-keys { + compatible = "gpio-keys"; + + back { + label = "Back"; + gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + home { + label = "Home"; + gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + menu { + label = "Menu"; + gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led { + label = "Heartbeat"; + gpios = <&pca9534 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +ðphy { + reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pca9534: gpio@20 { + compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9534>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + #gpio-cells = <2>; + wakeup-source; + + /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */ + usb3-sata-sel-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb3_sata_sel"; + }; + + som-vselect-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "som_vselect"; + }; + + enet-sel-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "enet_sel"; + }; + }; + + extcon_usbotg1: typec@3d { + compatible = "nxp,ptn5150"; + reg = <0x3d>; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ptn5150>; + status = "okay"; + }; +}; + +&i2c3 { + /* Capacitive touch controller */ + ft5x06_ts: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_captouch>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +/* Header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Header */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + disable-over-current; + extcon = <&extcon_usbotg1>, <&extcon_usbotg1>; +}; + +&pinctrl_fec1 { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ + >; +}; + +&pinctrl_fec1_sleep { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x120 + MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x120 + MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x120 + MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x120 + MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x120 + MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x120 + MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x120 + MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x120 + MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x120 + MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x120 + MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x120 + MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x120 + MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x120 + MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x120 + /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ + >; +}; + +&iomuxc { + pinctrl_captouch: captouchgrp { + fsl,pins = < + MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x16 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_pca9534: pca9534grp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16 + >; + }; + + pinctrl_ptn5150: ptn5150grp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi new file mode 100644 index 000000000000..a2d0190921e4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -0,0 +1,551 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + * Copyright 2019-2020 Variscite Ltd. + * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include "imx8mn.dtsi" + +/ { + model = "Variscite VAR-SOM-MX8MN module"; + compatible = "variscite,var-som-mx8mn", "fsl,imx8mn"; + + chosen { + stdout-path = &uart4; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x40000000>; + }; + + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_eth_phy>; + regulator-name = "eth_phy_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>, + <&gpio1 0 GPIO_ACTIVE_LOW>; + /delete-property/ dmas; + /delete-property/ dma-names; + status = "okay"; + + /* Resistive touch controller */ + touchscreen@0 { + reg = <0>; + compatible = "ti,ads7846"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restouch>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + spi-max-frequency = <1500000>; + pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + + ti,x-min = /bits/ 16 <125>; + touchscreen-size-x = /bits/ 16 <4008>; + ti,y-min = /bits/ 16 <282>; + touchscreen-size-y = /bits/ 16 <3864>; + ti,x-plate-ohms = /bits/ 16 <180>; + touchscreen-max-pressure = /bits/ 16 <255>; + touchscreen-average-samples = /bits/ 16 <10>; + ti,debounce-tol = /bits/ 16 <3>; + ti,debounce-rep = /bits/ 16 <1>; + ti,settle-delay-usec = /bits/ 16 <150>; + ti,keep-vref-on; + wakeup-source; + }; +}; + +&fec1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + phy-mode = "rgmii"; + phy-handle = <ðphy>; + phy-supply = <®_eth_phy>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio2>; + /* + * The interrupt is not correct. It should be level low, + * however with internal pull up this causes IRQ storm. + */ + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-compatible = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + /* TODO: configure audio, as of now just put a placeholder */ + wm8904: codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + status = "disabled"; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* Bluetooth */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MN_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; + uart-has-rtscts; + status = "okay"; +}; + +/* Console */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + usb-role-switch; + status = "okay"; +}; + +/* WIFI */ +&usdhc1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <4>; + non-removable; + keep-power-in-suspend; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD */ +&usdhc2 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x13 + MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x13 + MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x13 + MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x13 + MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x13 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_fec1_sleep: fec1sleepgrp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x120 + MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x120 + MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x120 + MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x120 + MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x120 + MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x120 + MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x120 + MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x120 + MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x120 + MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x120 + MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x120 + MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x120 + MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x120 + MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x120 + MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x120 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x101 + >; + }; + + pinctrl_reg_eth_phy: regethphygrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x41 + >; + }; + + pinctrl_restouch: restouchgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 9385dd7d1a2f..746faf1cf2fb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -741,7 +741,8 @@ reg = <0x30be0000 0x10000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_ENET1_ROOT>, <&clk IMX8MN_CLK_ENET1_ROOT>, <&clk IMX8MN_CLK_ENET_TIMER>, diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 3da1fff3d6fd..ad66f1286d95 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -124,8 +124,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_fec: fecgrp { fsl,pins = < MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 @@ -159,7 +157,7 @@ >; }; - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 >; @@ -184,7 +182,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 @@ -196,7 +194,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 @@ -208,7 +206,7 @@ >; }; - pinctrl_usdhc2_gpio: usdhc2grp-gpio { + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 >; @@ -230,7 +228,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 @@ -246,7 +244,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h index 319ab34cab3e..0fef066471ba 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h @@ -11,384 +11,318 @@ * <mux_reg conf_reg input_reg mux_mode input_val> */ #define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x014 0x274 0x000 0x0 0x0 -#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0 -#define MX8MP_IOMUXC_GPIO1_IO00__MEDIAMIX_ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0 -#define MX8MP_IOMUXC_GPIO1_IO00__ANAMIX_REF_CLK_32K 0x014 0x274 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_EXT_CLK1 0x014 0x274 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO00__SJC_FAIL 0x014 0x274 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x014 0x274 0x000 0x6 0x0 #define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x018 0x278 0x000 0x0 0x0 #define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x018 0x278 0x000 0x1 0x0 -#define MX8MP_IOMUXC_GPIO1_IO01__MEDIAMIX_ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0 -#define MX8MP_IOMUXC_GPIO1_IO01__ANAMIX_REF_CLK_24M 0x018 0x278 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO01__CCMSRCGPCMIX_EXT_CLK2 0x018 0x278 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO01__SJC_ACTIVE 0x018 0x278 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2 0x018 0x278 0x000 0x6 0x0 #define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02 0x01C 0x27C 0x000 0x0 0x0 #define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x01C 0x27C 0x000 0x1 0x0 -#define MX8MP_IOMUXC_GPIO1_IO02__MEDIAMIX_ISP_FLASH_TRIG_0 0x01C 0x27C 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO02__ISP_FLASH_TRIG_0 0x01C 0x27C 0x000 0x3 0x0 #define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_ANY 0x01C 0x27C 0x000 0x5 0x0 #define MX8MP_IOMUXC_GPIO1_IO02__SJC_DE_B 0x01C 0x27C 0x000 0x7 0x0 #define MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x020 0x280 0x000 0x0 0x0 #define MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT 0x020 0x280 0x000 0x1 0x0 -#define MX8MP_IOMUXC_GPIO1_IO03__MEDIAMIX_ISP_PRELIGHT_TRIG_0 0x020 0x280 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO03__ISP_PRELIGHT_TRIG_0 0x020 0x280 0x000 0x3 0x0 #define MX8MP_IOMUXC_GPIO1_IO03__SDMA1_EXT_EVENT00 0x020 0x280 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO03__ANAMIX_XTAL_OK 0x020 0x280 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO03__SJC_DONE 0x020 0x280 0x000 0x7 0x0 #define MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x024 0x284 0x000 0x0 0x0 #define MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x024 0x284 0x000 0x1 0x0 -#define MX8MP_IOMUXC_GPIO1_IO04__MEDIAMIX_ISP_SHUTTER_OPEN_0 0x024 0x284 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO04__ISP_SHUTTER_OPEN_0 0x024 0x284 0x000 0x3 0x0 #define MX8MP_IOMUXC_GPIO1_IO04__SDMA1_EXT_EVENT01 0x024 0x284 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO04__ANAMIX_XTAL_OK_LV 0x024 0x284 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO04__USDHC1_TEST_TRIG 0x024 0x284 0x000 0x7 0x0 #define MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x028 0x288 0x000 0x0 0x0 #define MX8MP_IOMUXC_GPIO1_IO05__M7_NMI 0x028 0x288 0x000 0x1 0x0 -#define MX8MP_IOMUXC_GPIO1_IO05__MEDIAMIX_ISP_FL_TRIG_1 0x028 0x288 0x5D8 0x3 0x0 -#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_PMIC_READY 0x028 0x288 0x554 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_INT_BOOT 0x028 0x288 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO05__USDHC2_TEST_TRIG 0x028 0x288 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO05__ISP_FL_TRIG_1 0x028 0x288 0x5D8 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO05__CCM_PMIC_READY 0x028 0x288 0x554 0x5 0x0 #define MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x02C 0x28C 0x000 0x0 0x0 #define MX8MP_IOMUXC_GPIO1_IO06__ENET_QOS_MDC 0x02C 0x28C 0x000 0x1 0x0 -#define MX8MP_IOMUXC_GPIO1_IO06__MEDIAMIX_ISP_SHUTTER_TRIG_1 0x02C 0x28C 0x5E0 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO06__ISP_SHUTTER_TRIG_1 0x02C 0x28C 0x5E0 0x3 0x0 #define MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B 0x02C 0x28C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO06__CCMSRCGPCMIX_EXT_CLK3 0x02C 0x28C 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO06__ECSPI1_TEST_TRIG 0x02C 0x28C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO06__CCM_EXT_CLK3 0x02C 0x28C 0x000 0x6 0x0 #define MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x030 0x290 0x000 0x0 0x0 #define MX8MP_IOMUXC_GPIO1_IO07__ENET_QOS_MDIO 0x030 0x290 0x590 0x1 0x0 -#define MX8MP_IOMUXC_GPIO1_IO07__MEDIAMIX_ISP_FLASH_TRIG_1 0x030 0x290 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO07__ISP_FLASH_TRIG_1 0x030 0x290 0x000 0x3 0x0 #define MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP 0x030 0x290 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO07__CCMSRCGPCMIX_EXT_CLK4 0x030 0x290 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO07__ECSPI2_TEST_TRIG 0x030 0x290 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO07__CCM_EXT_CLK4 0x030 0x290 0x000 0x6 0x0 #define MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x034 0x294 0x000 0x0 0x0 #define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_IN 0x034 0x294 0x000 0x1 0x0 #define MX8MP_IOMUXC_GPIO1_IO08__PWM1_OUT 0x034 0x294 0x000 0x2 0x0 -#define MX8MP_IOMUXC_GPIO1_IO08__MEDIAMIX_ISP_PRELIGHT_TRIG_1 0x034 0x294 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO08__ISP_PRELIGHT_TRIG_1 0x034 0x294 0x000 0x3 0x0 #define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_AUX_IN 0x034 0x294 0x000 0x4 0x0 #define MX8MP_IOMUXC_GPIO1_IO08__USDHC2_RESET_B 0x034 0x294 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO08__CCMSRCGPCMIX_WAIT 0x034 0x294 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO08__FLEXSPI_TEST_TRIG 0x034 0x294 0x000 0x7 0x0 #define MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x038 0x298 0x000 0x0 0x0 #define MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT 0x038 0x298 0x000 0x1 0x0 #define MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT 0x038 0x298 0x000 0x2 0x0 -#define MX8MP_IOMUXC_GPIO1_IO09__MEDIAMIX_ISP_SHUTTER_OPEN_1 0x038 0x298 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__ISP_SHUTTER_OPEN_1 0x038 0x298 0x000 0x3 0x0 #define MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B 0x038 0x298 0x000 0x4 0x0 -#define MX8MP_IOMUXC_GPIO1_IO09__AUDIOMIX_EXT_EVENT00 0x038 0x298 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO09__CCMSRCGPCMIX_STOP 0x038 0x298 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO09__RAWNAND_TEST_TRIG 0x038 0x298 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__SDMA2_EXT_EVENT00 0x038 0x298 0x000 0x5 0x0 #define MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x03C 0x29C 0x000 0x0 0x0 -#define MX8MP_IOMUXC_GPIO1_IO10__HSIOMIX_usb1_OTG_ID 0x03C 0x29C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x03C 0x29C 0x000 0x1 0x0 #define MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT 0x03C 0x29C 0x000 0x2 0x0 -#define MX8MP_IOMUXC_GPIO1_IO10__OCOTP_FUSE_LATCHED 0x03C 0x29C 0x000 0x7 0x0 #define MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x040 0x2A0 0x000 0x0 0x0 -#define MX8MP_IOMUXC_GPIO1_IO11__HSIOMIX_usb2_OTG_ID 0x040 0x2A0 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID 0x040 0x2A0 0x000 0x1 0x0 #define MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT 0x040 0x2A0 0x000 0x2 0x0 #define MX8MP_IOMUXC_GPIO1_IO11__USDHC3_VSELECT 0x040 0x2A0 0x000 0x4 0x0 -#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_PMIC_READY 0x040 0x2A0 0x554 0x5 0x1 -#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_OUT0 0x040 0x2A0 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO11__CAAM_RNG_OSC_OBS 0x040 0x2A0 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO11__CCM_PMIC_READY 0x040 0x2A0 0x554 0x5 0x1 #define MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x044 0x2A4 0x000 0x0 0x0 -#define MX8MP_IOMUXC_GPIO1_IO12__HSIOMIX_usb1_OTG_PWR 0x044 0x2A4 0x000 0x1 0x0 -#define MX8MP_IOMUXC_GPIO1_IO12__AUDIOMIX_EXT_EVENT01 0x044 0x2A4 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO12__CCMSRCGPCMIX_OUT1 0x044 0x2A4 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO12__CSU_CSU_ALARM_AUT00 0x044 0x2A4 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x044 0x2A4 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO12__SDMA2_EXT_EVENT01 0x044 0x2A4 0x000 0x5 0x0 #define MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x048 0x2A8 0x000 0x0 0x0 -#define MX8MP_IOMUXC_GPIO1_IO13__HSIOMIX_usb1_OTG_OC 0x048 0x2A8 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x048 0x2A8 0x000 0x1 0x0 #define MX8MP_IOMUXC_GPIO1_IO13__PWM2_OUT 0x048 0x2A8 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO13__CCMSRCGPCMIX_OUT2 0x048 0x2A8 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO13__CSU_CSU_ALARM_AUT01 0x048 0x2A8 0x000 0x7 0x0 #define MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x04C 0x2AC 0x000 0x0 0x0 -#define MX8MP_IOMUXC_GPIO1_IO14__HSIOMIX_usb2_OTG_PWR 0x04C 0x2AC 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x04C 0x2AC 0x000 0x1 0x0 #define MX8MP_IOMUXC_GPIO1_IO14__USDHC3_CD_B 0x04C 0x2AC 0x608 0x4 0x0 #define MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT 0x04C 0x2AC 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO14__CCMSRCGPCMIX_CLKO1 0x04C 0x2AC 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO14__CSU_CSU_ALARM_AUT02 0x04C 0x2AC 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x04C 0x2AC 0x000 0x6 0x0 #define MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x050 0x2B0 0x000 0x0 0x0 -#define MX8MP_IOMUXC_GPIO1_IO15__HSIOMIX_usb2_OTG_OC 0x050 0x2B0 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x050 0x2B0 0x000 0x1 0x0 #define MX8MP_IOMUXC_GPIO1_IO15__USDHC3_WP 0x050 0x2B0 0x634 0x4 0x0 #define MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT 0x050 0x2B0 0x000 0x5 0x0 -#define MX8MP_IOMUXC_GPIO1_IO15__CCMSRCGPCMIX_CLKO2 0x050 0x2B0 0x000 0x6 0x0 -#define MX8MP_IOMUXC_GPIO1_IO15__CSU_CSU_INT_DEB 0x050 0x2B0 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2 0x050 0x2B0 0x000 0x6 0x0 #define MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x054 0x2B4 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_MDC__AUDIOMIX_SAI6_TX_DATA00 0x054 0x2B4 0x000 0x2 0x0 #define MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16 0x054 0x2B4 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_MDC__USDHC3_STROBE 0x054 0x2B4 0x630 0x6 0x0 -#define MX8MP_IOMUXC_ENET_MDC__SIM_M_HADDR15 0x054 0x2B4 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x058 0x2B8 0x590 0x0 0x1 #define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_SAI6_TX_SYNC 0x058 0x2B8 0x528 0x2 0x0 +#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_PDM_BIT_STREAM03 0x058 0x2B8 0x4CC 0x3 0x0 #define MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17 0x058 0x2B8 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_MDIO__USDHC3_DATA5 0x058 0x2B8 0x624 0x6 0x0 -#define MX8MP_IOMUXC_ENET_MDIO__SIM_M_HADDR16 0x058 0x2B8 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x05C 0x2BC 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_SAI6_TX_BCLK 0x05C 0x2BC 0x524 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_PDM_BIT_STREAM02 0x05C 0x2BC 0x4C8 0x3 0x0 #define MX8MP_IOMUXC_ENET_TD3__GPIO1_IO18 0x05C 0x2BC 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_TD3__USDHC3_DATA6 0x05C 0x2BC 0x628 0x6 0x0 -#define MX8MP_IOMUXC_ENET_TD3__SIM_M_HADDR17 0x05C 0x2BC 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x060 0x2C0 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x060 0x2C0 0x000 0x1 0x0 #define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_SAI6_RX_DATA00 0x060 0x2C0 0x51C 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_PDM_BIT_STREAM01 0x060 0x2C0 0x4C4 0x3 0x0 #define MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19 0x060 0x2C0 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_TD2__USDHC3_DATA7 0x060 0x2C0 0x62C 0x6 0x0 -#define MX8MP_IOMUXC_ENET_TD2__SIM_M_HADDR18 0x060 0x2C0 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x064 0x2C4 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_SAI6_RX_SYNC 0x064 0x2C4 0x520 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_PDM_BIT_STREAM00 0x064 0x2C4 0x4C0 0x3 0x0 #define MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20 0x064 0x2C4 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_TD1__USDHC3_CD_B 0x064 0x2C4 0x608 0x6 0x1 -#define MX8MP_IOMUXC_ENET_TD1__SIM_M_HADDR19 0x064 0x2C4 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x068 0x2C8 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_SAI6_RX_BCLK 0x068 0x2C8 0x518 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_PDM_CLK 0x068 0x2C8 0x000 0x3 0x0 #define MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21 0x068 0x2C8 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_TD0__USDHC3_WP 0x068 0x2C8 0x634 0x6 0x1 -#define MX8MP_IOMUXC_ENET_TD0__SIM_M_HADDR20 0x068 0x2C8 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x06C 0x2CC 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SAI6_MCLK 0x06C 0x2CC 0x514 0x2 0x0 -#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF_OUT 0x06C 0x2CC 0x000 0x3 0x0 +#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF1_OUT 0x06C 0x2CC 0x000 0x3 0x0 #define MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22 0x06C 0x2CC 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_TX_CTL__USDHC3_DATA0 0x06C 0x2CC 0x610 0x6 0x0 -#define MX8MP_IOMUXC_ENET_TX_CTL__SIM_M_HADDR21 0x06C 0x2CC 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x070 0x2D0 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_TXC__ENET_QOS_TX_ER 0x070 0x2D0 0x000 0x1 0x0 #define MX8MP_IOMUXC_ENET_TXC__AUDIOMIX_SAI7_TX_DATA00 0x070 0x2D0 0x000 0x2 0x0 #define MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23 0x070 0x2D0 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_TXC__USDHC3_DATA1 0x070 0x2D0 0x614 0x6 0x0 -#define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22 0x070 0x2D0 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x074 0x2D4 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC 0x074 0x2D4 0x540 0x2 0x0 -#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03 0x074 0x2D4 0x4CC 0x3 0x1 +#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_PDM_BIT_STREAM03 0x074 0x2D4 0x4CC 0x3 0x1 #define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24 0x074 0x2D4 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2 0x074 0x2D4 0x618 0x6 0x0 -#define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23 0x074 0x2D4 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x078 0x2D8 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER 0x078 0x2D8 0x000 0x1 0x0 #define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK 0x078 0x2D8 0x53C 0x2 0x0 -#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02 0x078 0x2D8 0x4C8 0x3 0x1 +#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_PDM_BIT_STREAM02 0x078 0x2D8 0x4C8 0x3 0x1 #define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25 0x078 0x2D8 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3 0x078 0x2D8 0x61C 0x6 0x0 -#define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24 0x078 0x2D8 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x07C 0x2DC 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00 0x07C 0x2DC 0x534 0x2 0x0 -#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01 0x07C 0x2DC 0x4C4 0x3 0x1 +#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_PDM_BIT_STREAM01 0x07C 0x2DC 0x4C4 0x3 0x1 #define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26 0x07C 0x2DC 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4 0x07C 0x2DC 0x620 0x6 0x0 -#define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25 0x07C 0x2DC 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x080 0x2E0 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC 0x080 0x2E0 0x538 0x2 0x0 -#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00 0x080 0x2E0 0x4C0 0x3 0x1 +#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_PDM_BIT_STREAM00 0x080 0x2E0 0x4C0 0x3 0x1 #define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27 0x080 0x2E0 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B 0x080 0x2E0 0x000 0x6 0x0 -#define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26 0x080 0x2E0 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x084 0x2E4 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_SAI7_RX_BCLK 0x084 0x2E4 0x530 0x2 0x0 -#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_CLK 0x084 0x2E4 0x000 0x3 0x0 +#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_PDM_CLK 0x084 0x2E4 0x000 0x3 0x0 #define MX8MP_IOMUXC_ENET_RD2__GPIO1_IO28 0x084 0x2E4 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_RD2__USDHC3_CLK 0x084 0x2E4 0x604 0x6 0x0 -#define MX8MP_IOMUXC_ENET_RD2__SIM_M_HADDR27 0x084 0x2E4 0x000 0x7 0x0 #define MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x088 0x2E8 0x000 0x0 0x0 #define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SAI7_MCLK 0x088 0x2E8 0x52C 0x2 0x0 -#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF_IN 0x088 0x2E8 0x544 0x3 0x0 +#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF1_IN 0x088 0x2E8 0x544 0x3 0x0 #define MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29 0x088 0x2E8 0x000 0x5 0x0 #define MX8MP_IOMUXC_ENET_RD3__USDHC3_CMD 0x088 0x2E8 0x60C 0x6 0x0 -#define MX8MP_IOMUXC_ENET_RD3__SIM_M_HADDR28 0x088 0x2E8 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x08C 0x2EC 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_CLK__ENET1_MDC 0x08C 0x2EC 0x000 0x1 0x0 #define MX8MP_IOMUXC_SD1_CLK__I2C5_SCL 0x08C 0x2EC 0x5C4 0x3 0x0 #define MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x08C 0x2EC 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_CLK__UART1_DTE_RX 0x08C 0x2EC 0x5E8 0x4 0x0 #define MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00 0x08C 0x2EC 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_CLK__SIM_M_HADDR29 0x08C 0x2EC 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x090 0x2F0 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_CMD__ENET1_MDIO 0x090 0x2F0 0x57C 0x1 0x0 #define MX8MP_IOMUXC_SD1_CMD__I2C5_SDA 0x090 0x2F0 0x5C8 0x3 0x0 #define MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x090 0x2F0 0x5E8 0x4 0x1 #define MX8MP_IOMUXC_SD1_CMD__UART1_DTE_TX 0x090 0x2F0 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01 0x090 0x2F0 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_CMD__SIM_M_HADDR30 0x090 0x2F0 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x094 0x2F4 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_DATA0__ENET1_RGMII_TD1 0x094 0x2F4 0x000 0x1 0x0 #define MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x094 0x2F4 0x5CC 0x3 0x0 #define MX8MP_IOMUXC_SD1_DATA0__UART1_DCE_RTS 0x094 0x2F4 0x5E4 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA0__UART1_DTE_CTS 0x094 0x2F4 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x094 0x2F4 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_DATA0__SIM_M_HADDR31 0x094 0x2F4 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x098 0x2F8 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_DATA1__ENET1_RGMII_TD0 0x098 0x2F8 0x000 0x1 0x0 #define MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x098 0x2F8 0x5D0 0x3 0x0 #define MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS 0x098 0x2F8 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA1__UART1_DTE_RTS 0x098 0x2F8 0x5E4 0x4 0x1 #define MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x098 0x2F8 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_DATA1__SIM_M_HBURST00 0x098 0x2F8 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x09C 0x2FC 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_DATA2__ENET1_RGMII_RD0 0x09C 0x2FC 0x580 0x1 0x0 #define MX8MP_IOMUXC_SD1_DATA2__I2C4_SCL 0x09C 0x2FC 0x5BC 0x3 0x0 #define MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x09C 0x2FC 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA2__UART2_DTE_RX 0x09C 0x2FC 0x5F0 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04 0x09C 0x2FC 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_DATA2__SIM_M_HBURST01 0x09C 0x2FC 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x0A0 0x300 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_DATA3__ENET1_RGMII_RD1 0x0A0 0x300 0x584 0x1 0x0 #define MX8MP_IOMUXC_SD1_DATA3__I2C4_SDA 0x0A0 0x300 0x5C0 0x3 0x0 #define MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x0A0 0x300 0x5F0 0x4 0x1 #define MX8MP_IOMUXC_SD1_DATA3__UART2_DTE_TX 0x0A0 0x300 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05 0x0A0 0x300 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_DATA3__SIM_M_HBURST02 0x0A0 0x300 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4 0x0A4 0x304 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_DATA4__ENET1_RGMII_TX_CTL 0x0A4 0x304 0x000 0x1 0x0 #define MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL 0x0A4 0x304 0x5A4 0x3 0x0 #define MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x0A4 0x304 0x5EC 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS 0x0A4 0x304 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x0A4 0x304 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_DATA4__SIM_M_HRESP 0x0A4 0x304 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5 0x0A8 0x308 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_DATA5__ENET1_TX_ER 0x0A8 0x308 0x000 0x1 0x0 #define MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA 0x0A8 0x308 0x5A8 0x3 0x0 #define MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x0A8 0x308 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS 0x0A8 0x308 0x5EC 0x4 0x1 #define MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x0A8 0x308 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_DATA5__TPSMP_HDATA05 0x0A8 0x308 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6 0x0AC 0x30C 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_DATA6__ENET1_RGMII_RX_CTL 0x0AC 0x30C 0x588 0x1 0x0 #define MX8MP_IOMUXC_SD1_DATA6__I2C2_SCL 0x0AC 0x30C 0x5AC 0x3 0x0 #define MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x0AC 0x30C 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX 0x0AC 0x30C 0x5F8 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x0AC 0x30C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_DATA6__TPSMP_HDATA06 0x0AC 0x30C 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7 0x0B0 0x310 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_DATA7__ENET1_RX_ER 0x0B0 0x310 0x58C 0x1 0x0 #define MX8MP_IOMUXC_SD1_DATA7__I2C2_SDA 0x0B0 0x310 0x5B0 0x3 0x0 #define MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x0B0 0x310 0x5F8 0x4 0x1 #define MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX 0x0B0 0x310 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x0B0 0x310 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_DATA7__TPSMP_HDATA07 0x0B0 0x310 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 0x0B4 0x314 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_RESET_B__ENET1_TX_CLK 0x0B4 0x314 0x578 0x1 0x0 #define MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL 0x0B4 0x314 0x5B4 0x3 0x0 #define MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS 0x0B4 0x314 0x5F4 0x4 0x0 #define MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS 0x0B4 0x314 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x0B4 0x314 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_RESET_B__ECSPI3_TEST_TRIG 0x0B4 0x314 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE 0x0B8 0x318 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA 0x0B8 0x318 0x5B8 0x3 0x0 #define MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS 0x0B8 0x318 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS 0x0B8 0x318 0x5F4 0x4 0x1 #define MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x0B8 0x318 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD1_STROBE__USDHC3_TEST_TRIG 0x0B8 0x318 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x0BC 0x31C 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x0BC 0x31C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD2_CD_B__CCMSRCGPCMIX_TESTER_ACK 0x0BC 0x31C 0x000 0x6 0x0 #define MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x0C0 0x320 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD2_CLK__ECSPI2_SCLK 0x0C0 0x320 0x568 0x2 0x0 #define MX8MP_IOMUXC_SD2_CLK__UART4_DCE_RX 0x0C0 0x320 0x600 0x3 0x0 #define MX8MP_IOMUXC_SD2_CLK__UART4_DTE_TX 0x0C0 0x320 0x000 0x3 0x0 #define MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x0C0 0x320 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0C0 0x320 0x000 0x6 0x0 -#define MX8MP_IOMUXC_SD2_CLK__OBSERVE_MUX_OUT00 0x0C0 0x320 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x0C4 0x324 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD2_CMD__ECSPI2_MOSI 0x0C4 0x324 0x570 0x2 0x0 #define MX8MP_IOMUXC_SD2_CMD__UART4_DCE_TX 0x0C4 0x324 0x000 0x3 0x0 #define MX8MP_IOMUXC_SD2_CMD__UART4_DTE_RX 0x0C4 0x324 0x600 0x3 0x1 -#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_CLK 0x0C4 0x324 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_PDM_CLK 0x0C4 0x324 0x000 0x4 0x0 #define MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x0C4 0x324 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0C4 0x324 0x000 0x6 0x0 -#define MX8MP_IOMUXC_SD2_CMD__OBSERVE_MUX_OUT01 0x0C4 0x324 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x0C8 0x328 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA 0x0C8 0x328 0x5C0 0x2 0x1 #define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX 0x0C8 0x328 0x5F0 0x3 0x2 #define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX 0x0C8 0x328 0x000 0x3 0x0 -#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00 0x0C8 0x328 0x4C0 0x4 0x2 +#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_PDM_BIT_STREAM00 0x0C8 0x328 0x4C0 0x4 0x2 #define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x0C8 0x328 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x0C8 0x328 0x000 0x6 0x0 -#define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02 0x0C8 0x328 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x0CC 0x32C 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD2_DATA1__I2C4_SCL 0x0CC 0x32C 0x5BC 0x2 0x1 #define MX8MP_IOMUXC_SD2_DATA1__UART2_DCE_TX 0x0CC 0x32C 0x000 0x3 0x0 #define MX8MP_IOMUXC_SD2_DATA1__UART2_DTE_RX 0x0CC 0x32C 0x5F0 0x3 0x3 -#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_BIT_STREAM01 0x0CC 0x32C 0x4C4 0x4 0x1 +#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_PDM_BIT_STREAM01 0x0CC 0x32C 0x4C4 0x4 0x2 #define MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x0CC 0x32C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0CC 0x32C 0x000 0x6 0x0 -#define MX8MP_IOMUXC_SD2_DATA1__OBSERVE_MUX_OUT03 0x0CC 0x32C 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x0D0 0x330 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD2_DATA2__ECSPI2_SS0 0x0D0 0x330 0x574 0x2 0x0 -#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF_OUT 0x0D0 0x330 0x000 0x3 0x0 -#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_BIT_STREAM02 0x0D0 0x330 0x4C8 0x4 0x1 +#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF1_OUT 0x0D0 0x330 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_PDM_BIT_STREAM02 0x0D0 0x330 0x4C8 0x4 0x2 #define MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x0D0 0x330 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0D0 0x330 0x000 0x6 0x0 -#define MX8MP_IOMUXC_SD2_DATA2__OBSERVE_MUX_OUT04 0x0D0 0x330 0x000 0x7 0x0 #define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x0D4 0x334 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO 0x0D4 0x334 0x56C 0x2 0x0 -#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN 0x0D4 0x334 0x544 0x3 0x1 -#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03 0x0D4 0x334 0x4CC 0x4 0x2 +#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF1_IN 0x0D4 0x334 0x544 0x3 0x1 +#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_PDM_BIT_STREAM03 0x0D4 0x334 0x4CC 0x4 0x2 #define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x0D4 0x334 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0D4 0x334 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_DATA3__SRC_EARLY_RESET 0x0D4 0x334 0x000 0x6 0x0 #define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x0D8 0x338 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x0D8 0x338 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x0D8 0x338 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_RESET_B__SRC_SYSTEM_RESET 0x0D8 0x338 0x000 0x6 0x0 #define MX8MP_IOMUXC_SD2_WP__USDHC2_WP 0x0DC 0x33C 0x000 0x0 0x0 #define MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x0DC 0x33C 0x000 0x5 0x0 #define MX8MP_IOMUXC_SD2_WP__CORESIGHT_EVENTI 0x0DC 0x33C 0x000 0x6 0x0 -#define MX8MP_IOMUXC_SD2_WP__SIM_M_HMASTLOCK 0x0DC 0x33C 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_ALE__RAWNAND_ALE 0x0E0 0x340 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_ALE__NAND_ALE 0x0E0 0x340 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x0E0 0x340 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_ALE__AUDIOMIX_SAI3_TX_BCLK 0x0E0 0x340 0x4E8 0x2 0x0 -#define MX8MP_IOMUXC_NAND_ALE__MEDIAMIX_ISP_FL_TRIG_0 0x0E0 0x340 0x5D4 0x3 0x1 +#define MX8MP_IOMUXC_NAND_ALE__ISP_FL_TRIG_0 0x0E0 0x340 0x5D4 0x3 0x1 #define MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX 0x0E0 0x340 0x5F8 0x4 0x2 #define MX8MP_IOMUXC_NAND_ALE__UART3_DTE_TX 0x0E0 0x340 0x000 0x4 0x0 #define MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x0E0 0x340 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_ALE__CORESIGHT_TRACE_CLK 0x0E0 0x340 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_ALE__SIM_M_HPROT00 0x0E0 0x340 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_CE0_B__RAWNAND_CE0_B 0x0E4 0x344 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CE0_B__NAND_CE0_B 0x0E4 0x344 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x0E4 0x344 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_CE0_B__AUDIOMIX_SAI3_TX_DATA00 0x0E4 0x344 0x000 0x2 0x0 -#define MX8MP_IOMUXC_NAND_CE0_B__MEDIAMIX_ISP_SHUTTER_TRIG_0 0x0E4 0x344 0x5DC 0x3 0x1 +#define MX8MP_IOMUXC_NAND_CE0_B__ISP_SHUTTER_TRIG_0 0x0E4 0x344 0x5DC 0x3 0x1 #define MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX 0x0E4 0x344 0x000 0x4 0x0 #define MX8MP_IOMUXC_NAND_CE0_B__UART3_DTE_RX 0x0E4 0x344 0x5F8 0x4 0x3 #define MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x0E4 0x344 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_CE0_B__CORESIGHT_TRACE_CTL 0x0E4 0x344 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_CE0_B__SIM_M_HPROT01 0x0E4 0x344 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_CE1_B__RAWNAND_CE1_B 0x0E8 0x348 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CE1_B__NAND_CE1_B 0x0E8 0x348 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_CE1_B__FLEXSPI_A_SS1_B 0x0E8 0x348 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x0E8 0x348 0x630 0x2 0x1 #define MX8MP_IOMUXC_NAND_CE1_B__I2C4_SCL 0x0E8 0x348 0x5BC 0x4 0x2 #define MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02 0x0E8 0x348 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_CE1_B__CORESIGHT_TRACE00 0x0E8 0x348 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_CE1_B__SIM_M_HPROT02 0x0E8 0x348 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_CE2_B__RAWNAND_CE2_B 0x0EC 0x34C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CE2_B__NAND_CE2_B 0x0EC 0x34C 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_CE2_B__FLEXSPI_B_SS0_B 0x0EC 0x34C 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x0EC 0x34C 0x624 0x2 0x1 #define MX8MP_IOMUXC_NAND_CE2_B__I2C4_SDA 0x0EC 0x34C 0x5C0 0x4 0x2 #define MX8MP_IOMUXC_NAND_CE2_B__GPIO3_IO03 0x0EC 0x34C 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_CE2_B__CORESIGHT_TRACE01 0x0EC 0x34C 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_CE2_B__SIM_M_HPROT03 0x0EC 0x34C 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_CE3_B__RAWNAND_CE3_B 0x0F0 0x350 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CE3_B__NAND_CE3_B 0x0F0 0x350 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_CE3_B__FLEXSPI_B_SS1_B 0x0F0 0x350 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x0F0 0x350 0x628 0x2 0x1 #define MX8MP_IOMUXC_NAND_CE3_B__I2C3_SDA 0x0F0 0x350 0x5B8 0x4 0x1 #define MX8MP_IOMUXC_NAND_CE3_B__GPIO3_IO04 0x0F0 0x350 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_CE3_B__CORESIGHT_TRACE02 0x0F0 0x350 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_CE3_B__SIM_M_HADDR00 0x0F0 0x350 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_CLE__RAWNAND_CLE 0x0F4 0x354 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CLE__NAND_CLE 0x0F4 0x354 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_CLE__FLEXSPI_B_SCLK 0x0F4 0x354 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x0F4 0x354 0x62C 0x2 0x1 #define MX8MP_IOMUXC_NAND_CLE__UART4_DCE_RX 0x0F4 0x354 0x600 0x4 0x2 #define MX8MP_IOMUXC_NAND_CLE__UART4_DTE_TX 0x0F4 0x354 0x000 0x4 0x0 #define MX8MP_IOMUXC_NAND_CLE__GPIO3_IO05 0x0F4 0x354 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_CLE__CORESIGHT_TRACE03 0x0F4 0x354 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_CLE__SIM_M_HADDR01 0x0F4 0x354 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_DATA00__RAWNAND_DATA00 0x0F8 0x358 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__NAND_DATA00 0x0F8 0x358 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x0F8 0x358 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_DATA00__AUDIOMIX_SAI3_RX_DATA00 0x0F8 0x358 0x4E4 0x2 0x0 -#define MX8MP_IOMUXC_NAND_DATA00__MEDIAMIX_ISP_FLASH_TRIG_0 0x0F8 0x358 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__ISP_FLASH_TRIG_0 0x0F8 0x358 0x000 0x3 0x0 #define MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX 0x0F8 0x358 0x600 0x4 0x3 #define MX8MP_IOMUXC_NAND_DATA00__UART4_DTE_TX 0x0F8 0x358 0x000 0x4 0x0 #define MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x0F8 0x358 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_DATA00__CORESIGHT_TRACE04 0x0F8 0x358 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_DATA00__SIM_M_HADDR02 0x0F8 0x358 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_DATA01__RAWNAND_DATA01 0x0FC 0x35C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__NAND_DATA01 0x0FC 0x35C 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x0FC 0x35C 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC 0x0FC 0x35C 0x4EC 0x2 0x0 -#define MX8MP_IOMUXC_NAND_DATA01__MEDIAMIX_ISP_PRELIGHT_TRIG_0 0x0FC 0x35C 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__ISP_PRELIGHT_TRIG_0 0x0FC 0x35C 0x000 0x3 0x0 #define MX8MP_IOMUXC_NAND_DATA01__UART4_DCE_TX 0x0FC 0x35C 0x000 0x4 0x0 #define MX8MP_IOMUXC_NAND_DATA01__UART4_DTE_RX 0x0FC 0x35C 0x600 0x4 0x4 #define MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x0FC 0x35C 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_DATA01__CORESIGHT_TRACE05 0x0FC 0x35C 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_DATA01__SIM_M_HADDR03 0x0FC 0x35C 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_DATA02__RAWNAND_DATA02 0x100 0x360 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA02__NAND_DATA02 0x100 0x360 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x100 0x360 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_DATA02__USDHC3_CD_B 0x100 0x360 0x608 0x2 0x2 #define MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS 0x100 0x360 0x000 0x3 0x0 @@ -396,82 +330,71 @@ #define MX8MP_IOMUXC_NAND_DATA02__I2C4_SDA 0x100 0x360 0x5C0 0x4 0x3 #define MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x100 0x360 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_DATA02__CORESIGHT_TRACE06 0x100 0x360 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_DATA02__SIM_M_HADDR04 0x100 0x360 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_DATA03__RAWNAND_DATA03 0x104 0x364 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA03__NAND_DATA03 0x104 0x364 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x104 0x364 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_DATA03__USDHC3_WP 0x104 0x364 0x634 0x2 0x2 #define MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS 0x104 0x364 0x5FC 0x3 0x1 #define MX8MP_IOMUXC_NAND_DATA03__UART4_DTE_CTS 0x104 0x364 0x000 0x3 0x0 -#define MX8MP_IOMUXC_NAND_DATA03__MEDIAMIX_ISP_FL_TRIG_1 0x104 0x364 0x5D8 0x4 0x1 +#define MX8MP_IOMUXC_NAND_DATA03__ISP_FL_TRIG_1 0x104 0x364 0x5D8 0x4 0x1 #define MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x104 0x364 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_DATA03__CORESIGHT_TRACE07 0x104 0x364 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_DATA03__SIM_M_HADDR05 0x104 0x364 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_DATA04__RAWNAND_DATA04 0x108 0x368 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA04__NAND_DATA04 0x108 0x368 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_B_DATA00 0x108 0x368 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x108 0x368 0x610 0x2 0x1 #define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_A_DATA04 0x108 0x368 0x000 0x3 0x0 -#define MX8MP_IOMUXC_NAND_DATA04__MEDIAMIX_ISP_SHUTTER_TRIG_1 0x108 0x368 0x5E0 0x4 0x1 +#define MX8MP_IOMUXC_NAND_DATA04__ISP_SHUTTER_TRIG_1 0x108 0x368 0x5E0 0x4 0x1 #define MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10 0x108 0x368 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_DATA04__CORESIGHT_TRACE08 0x108 0x368 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_DATA04__SIM_M_HADDR06 0x108 0x368 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_DATA05__RAWNAND_DATA05 0x10C 0x36C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA05__NAND_DATA05 0x10C 0x36C 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_B_DATA01 0x10C 0x36C 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x10C 0x36C 0x614 0x2 0x1 #define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_A_DATA05 0x10C 0x36C 0x000 0x3 0x0 -#define MX8MP_IOMUXC_NAND_DATA05__MEDIAMIX_ISP_FLASH_TRIG_1 0x10C 0x36C 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_DATA05__ISP_FLASH_TRIG_1 0x10C 0x36C 0x000 0x4 0x0 #define MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11 0x10C 0x36C 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_DATA05__CORESIGHT_TRACE09 0x10C 0x36C 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_DATA05__SIM_M_HADDR07 0x10C 0x36C 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_DATA06__RAWNAND_DATA06 0x110 0x370 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA06__NAND_DATA06 0x110 0x370 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_B_DATA02 0x110 0x370 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x110 0x370 0x618 0x2 0x1 #define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_A_DATA06 0x110 0x370 0x000 0x3 0x0 -#define MX8MP_IOMUXC_NAND_DATA06__MEDIAMIX_ISP_PRELIGHT_TRIG_1 0x110 0x370 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_DATA06__ISP_PRELIGHT_TRIG_1 0x110 0x370 0x000 0x4 0x0 #define MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12 0x110 0x370 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_DATA06__CORESIGHT_TRACE10 0x110 0x370 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_DATA06__SIM_M_HADDR08 0x110 0x370 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_DATA07__RAWNAND_DATA07 0x114 0x374 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA07__NAND_DATA07 0x114 0x374 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_B_DATA03 0x114 0x374 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x114 0x374 0x61C 0x2 0x1 #define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_A_DATA07 0x114 0x374 0x000 0x3 0x0 -#define MX8MP_IOMUXC_NAND_DATA07__MEDIAMIX_ISP_SHUTTER_OPEN_1 0x114 0x374 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_DATA07__ISP_SHUTTER_OPEN_1 0x114 0x374 0x000 0x4 0x0 #define MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13 0x114 0x374 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_DATA07__CORESIGHT_TRACE11 0x114 0x374 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_DATA07__SIM_M_HADDR09 0x114 0x374 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_DQS__RAWNAND_DQS 0x118 0x378 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DQS__NAND_DQS 0x118 0x378 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS 0x118 0x378 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_DQS__AUDIOMIX_SAI3_MCLK 0x118 0x378 0x4E0 0x2 0x0 -#define MX8MP_IOMUXC_NAND_DQS__MEDIAMIX_ISP_SHUTTER_OPEN_0 0x118 0x378 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DQS__ISP_SHUTTER_OPEN_0 0x118 0x378 0x000 0x3 0x0 #define MX8MP_IOMUXC_NAND_DQS__I2C3_SCL 0x118 0x378 0x5B4 0x4 0x1 #define MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x118 0x378 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_DQS__CORESIGHT_TRACE12 0x118 0x378 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_DQS__SIM_M_HADDR10 0x118 0x378 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_RE_B__RAWNAND_RE_B 0x11C 0x37C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_RE_B__NAND_RE_B 0x11C 0x37C 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_RE_B__FLEXSPI_B_DQS 0x11C 0x37C 0x000 0x1 0x0 #define MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x11C 0x37C 0x620 0x2 0x1 #define MX8MP_IOMUXC_NAND_RE_B__UART4_DCE_TX 0x11C 0x37C 0x000 0x4 0x0 #define MX8MP_IOMUXC_NAND_RE_B__UART4_DTE_RX 0x11C 0x37C 0x600 0x4 0x5 #define MX8MP_IOMUXC_NAND_RE_B__GPIO3_IO15 0x11C 0x37C 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_RE_B__CORESIGHT_TRACE13 0x11C 0x37C 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_RE_B__SIM_M_HADDR11 0x11C 0x37C 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_READY_B__RAWNAND_READY_B 0x120 0x380 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_READY_B__NAND_READY_B 0x120 0x380 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x120 0x380 0x000 0x2 0x0 #define MX8MP_IOMUXC_NAND_READY_B__I2C3_SCL 0x120 0x380 0x5B4 0x4 0x2 #define MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x120 0x380 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_READY_B__CORESIGHT_TRACE14 0x120 0x380 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_READY_B__SIM_M_HADDR12 0x120 0x380 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_WE_B__RAWNAND_WE_B 0x124 0x384 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_WE_B__NAND_WE_B 0x124 0x384 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x124 0x384 0x604 0x2 0x1 #define MX8MP_IOMUXC_NAND_WE_B__I2C3_SDA 0x124 0x384 0x5B8 0x4 0x2 #define MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17 0x124 0x384 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_WE_B__CORESIGHT_TRACE15 0x124 0x384 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_WE_B__SIM_M_HADDR13 0x124 0x384 0x000 0x7 0x0 -#define MX8MP_IOMUXC_NAND_WP_B__RAWNAND_WP_B 0x128 0x388 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_WP_B__NAND_WP_B 0x128 0x388 0x000 0x0 0x0 #define MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x128 0x388 0x60C 0x2 0x1 #define MX8MP_IOMUXC_NAND_WP_B__I2C4_SCL 0x128 0x388 0x5BC 0x4 0x3 #define MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18 0x128 0x388 0x000 0x5 0x0 #define MX8MP_IOMUXC_NAND_WP_B__CORESIGHT_EVENTO 0x128 0x388 0x000 0x6 0x0 -#define MX8MP_IOMUXC_NAND_WP_B__SIM_M_HADDR14 0x128 0x388 0x000 0x7 0x0 #define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI5_RX_SYNC 0x12C 0x38C 0x508 0x0 0x0 #define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0x12C 0x38C 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT 0x12C 0x38C 0x000 0x2 0x0 @@ -481,33 +404,33 @@ #define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI1_TX_DATA01 0x130 0x390 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT 0x130 0x390 0x000 0x2 0x0 #define MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x130 0x390 0x5D0 0x3 0x1 -#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_CLK 0x130 0x390 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK 0x130 0x390 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x130 0x390 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00 0x134 0x394 0x4F8 0x0 0x0 #define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02 0x134 0x394 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x134 0x394 0x000 0x2 0x0 #define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL 0x134 0x394 0x5C4 0x3 0x1 -#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00 0x134 0x394 0x4C0 0x4 0x3 +#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00 0x134 0x394 0x4C0 0x4 0x3 #define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x134 0x394 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x138 0x398 0x4FC 0x0 0x0 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03 0x138 0x398 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0x138 0x398 0x4D8 0x2 0x0 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0x138 0x398 0x510 0x3 0x0 -#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01 0x138 0x398 0x4C4 0x4 0x3 +#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01 0x138 0x398 0x4C4 0x4 0x3 #define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x138 0x398 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x138 0x398 0x000 0x6 0x0 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x13C 0x39C 0x500 0x0 0x0 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04 0x13C 0x39C 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC 0x13C 0x39C 0x4D8 0x2 0x1 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0x13C 0x39C 0x50C 0x3 0x0 -#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02 0x13C 0x39C 0x4C8 0x4 0x3 +#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02 0x13C 0x39C 0x4C8 0x4 0x3 #define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x13C 0x39C 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x13C 0x39C 0x54C 0x6 0x0 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x140 0x3A0 0x504 0x0 0x0 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05 0x140 0x3A0 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC 0x140 0x3A0 0x4D8 0x2 0x2 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0x140 0x3A0 0x000 0x3 0x0 -#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03 0x140 0x3A0 0x4CC 0x4 0x3 +#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03 0x140 0x3A0 0x4CC 0x4 0x3 #define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x140 0x3A0 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x140 0x3A0 0x000 0x6 0x0 #define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK 0x144 0x3A4 0x4F0 0x0 0x0 @@ -517,33 +440,27 @@ #define MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x144 0x3A4 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x144 0x3A4 0x550 0x6 0x0 #define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI1_RX_SYNC 0x148 0x3A8 0x4D0 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI5_RX_SYNC 0x148 0x3A8 0x508 0x1 0x1 #define MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x148 0x3A8 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x148 0x3A8 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI1_RX_BCLK 0x14C 0x3AC 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI5_RX_BCLK 0x14C 0x3AC 0x4F4 0x1 0x1 -#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_CLK 0x14C 0x3AC 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_PDM_CLK 0x14C 0x3AC 0x000 0x3 0x0 #define MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x14C 0x3AC 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x14C 0x3AC 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0x150 0x3B0 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00 0x150 0x3B0 0x4F8 0x1 0x1 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01 0x150 0x3B0 0x000 0x2 0x0 -#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00 0x150 0x3B0 0x4C0 0x3 0x4 +#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_PDM_BIT_STREAM00 0x150 0x3B0 0x4C0 0x3 0x4 #define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x150 0x3B0 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x150 0x3B0 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01 0x154 0x3B4 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x154 0x3B4 0x4FC 0x1 0x1 -#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01 0x154 0x3B4 0x4C4 0x3 0x4 +#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_PDM_BIT_STREAM01 0x154 0x3B4 0x4C4 0x3 0x4 #define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x154 0x3B4 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x154 0x3B4 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02 0x158 0x3B8 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x158 0x3B8 0x500 0x1 0x1 -#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02 0x158 0x3B8 0x4C8 0x3 0x4 +#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_PDM_BIT_STREAM02 0x158 0x3B8 0x4C8 0x3 0x4 #define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x158 0x3B8 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x158 0x3B8 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03 0x15C 0x3BC 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x15C 0x3BC 0x504 0x1 0x1 -#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03 0x15C 0x3BC 0x4CC 0x3 0x4 +#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_PDM_BIT_STREAM03 0x15C 0x3BC 0x4CC 0x3 0x4 #define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x15C 0x3BC 0x57C 0x4 0x1 #define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x15C 0x3BC 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04 0x160 0x3C0 0x000 0x0 0x0 @@ -569,27 +486,21 @@ #define MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x16C 0x3CC 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 0x16C 0x3CC 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI1_TX_SYNC 0x170 0x3D0 0x4D8 0x0 0x4 -#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI5_TX_SYNC 0x170 0x3D0 0x510 0x1 0x1 #define MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x170 0x3D0 0x588 0x4 0x1 #define MX8MP_IOMUXC_SAI1_TXFS__GPIO4_IO10 0x170 0x3D0 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI1_TX_BCLK 0x174 0x3D4 0x4D4 0x0 0x1 -#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI5_TX_BCLK 0x174 0x3D4 0x50C 0x1 0x1 #define MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x174 0x3D4 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x174 0x3D4 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI1_TX_DATA00 0x178 0x3D8 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI5_TX_DATA00 0x178 0x3D8 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x178 0x3D8 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x178 0x3D8 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI1_TX_DATA01 0x17C 0x3DC 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI5_TX_DATA01 0x17C 0x3DC 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x17C 0x3DC 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13 0x17C 0x3DC 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI1_TX_DATA02 0x180 0x3E0 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI5_TX_DATA02 0x180 0x3E0 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x180 0x3E0 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x180 0x3E0 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI1_TX_DATA03 0x184 0x3E4 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI5_TX_DATA03 0x184 0x3E4 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x184 0x3E4 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15 0x184 0x3E4 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI1_TX_DATA04 0x188 0x3E8 0x000 0x0 0x0 @@ -609,11 +520,10 @@ #define MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x190 0x3F0 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI1_TX_DATA07 0x194 0x3F4 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK 0x194 0x3F4 0x514 0x1 0x2 -#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_CLK 0x194 0x3F4 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_PDM_CLK 0x194 0x3F4 0x000 0x3 0x0 #define MX8MP_IOMUXC_SAI1_TXD7__ENET1_TX_ER 0x194 0x3F4 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x194 0x3F4 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK 0x198 0x3F8 0x000 0x0 0x0 -#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI5_MCLK 0x198 0x3F8 0x4F0 0x1 0x1 #define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_TX_BCLK 0x198 0x3F8 0x4D4 0x2 0x2 #define MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x198 0x3F8 0x578 0x4 0x1 #define MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x198 0x3F8 0x000 0x5 0x0 @@ -624,16 +534,14 @@ #define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x19C 0x3FC 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX 0x19C 0x3FC 0x5E8 0x4 0x2 #define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19C 0x3FC 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02 0x19C 0x3FC 0x4C8 0x6 0x5 -#define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00 0x19C 0x3FC 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_PDM_BIT_STREAM02 0x19C 0x3FC 0x4C8 0x6 0x5 #define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK 0x1A0 0x400 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK 0x1A0 0x400 0x50C 0x1 0x2 #define MX8MP_IOMUXC_SAI2_RXC__CAN1_TX 0x1A0 0x400 0x000 0x3 0x0 #define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x1A0 0x400 0x5E8 0x4 0x3 #define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX 0x1A0 0x400 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x1A0 0x400 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01 0x1A0 0x400 0x4C4 0x6 0x5 -#define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01 0x1A0 0x400 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_PDM_BIT_STREAM01 0x1A0 0x400 0x4C4 0x6 0x5 #define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0x1A4 0x404 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00 0x1A4 0x404 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x1A4 0x404 0x000 0x2 0x0 @@ -641,8 +549,7 @@ #define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x1A4 0x404 0x5E4 0x4 0x2 #define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS 0x1A4 0x404 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x1A4 0x404 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03 0x1A4 0x404 0x4CC 0x6 0x5 -#define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02 0x1A4 0x404 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_PDM_BIT_STREAM03 0x1A4 0x404 0x4CC 0x6 0x5 #define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0x1A8 0x408 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01 0x1A8 0x408 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI2_TXFS__ENET_QOS_1588_EVENT3_OUT 0x1A8 0x408 0x000 0x2 0x0 @@ -650,22 +557,18 @@ #define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x1A8 0x408 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS 0x1A8 0x408 0x5E4 0x4 0x3 #define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x1A8 0x408 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02 0x1A8 0x408 0x4C8 0x6 0x6 -#define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE 0x1A8 0x408 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_PDM_BIT_STREAM02 0x1A8 0x408 0x4C8 0x6 0x6 #define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0x1AC 0x40C 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02 0x1AC 0x40C 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX 0x1AC 0x40C 0x54C 0x3 0x1 #define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x1AC 0x40C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01 0x1AC 0x40C 0x4C4 0x6 0x6 -#define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT 0x1AC 0x40C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_PDM_BIT_STREAM01 0x1AC 0x40C 0x4C4 0x6 0x6 #define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0x1B0 0x410 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03 0x1B0 0x410 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1B0 0x410 0x000 0x2 0x0 #define MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x1B0 0x410 0x000 0x3 0x0 #define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_AUX_IN 0x1B0 0x410 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x1B0 0x410 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI2_TXD0__CCMSRCGPCMIX_BOOT_MODE04 0x1B0 0x410 0x000 0x6 0x0 -#define MX8MP_IOMUXC_SAI2_TXD0__TPSMP_CLK 0x1B0 0x410 0x000 0x7 0x0 #define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0x1B4 0x414 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI5_MCLK 0x1B4 0x414 0x4F0 0x1 0x2 #define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_IN 0x1B4 0x414 0x000 0x2 0x0 @@ -673,15 +576,13 @@ #define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_AUX_IN 0x1B4 0x414 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x1B4 0x414 0x000 0x5 0x0 #define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI3_MCLK 0x1B4 0x414 0x4E0 0x6 0x1 -#define MX8MP_IOMUXC_SAI2_MCLK__TPSMP_HDATA_DIR 0x1B4 0x414 0x000 0x7 0x0 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC 0x1B8 0x418 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI2_RX_DATA01 0x1B8 0x418 0x4DC 0x1 0x1 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC 0x1B8 0x418 0x508 0x2 0x2 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01 0x1B8 0x418 0x000 0x3 0x0 -#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN 0x1B8 0x418 0x544 0x4 0x2 +#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF1_IN 0x1B8 0x418 0x544 0x4 0x2 #define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x1B8 0x418 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00 0x1B8 0x418 0x4C0 0x6 0x5 -#define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00 0x1B8 0x418 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00 0x1B8 0x418 0x4C0 0x6 0x5 #define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK 0x1BC 0x41C 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02 0x1BC 0x41C 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK 0x1BC 0x41C 0x4F4 0x2 0x2 @@ -689,16 +590,14 @@ #define MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x1BC 0x41C 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI3_RXC__UART2_DTE_RTS 0x1BC 0x41C 0x5EC 0x4 0x2 #define MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1BC 0x41C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_CLK 0x1BC 0x41C 0x000 0x6 0x0 -#define MX8MP_IOMUXC_SAI3_RXC__TPSMP_HTRANS01 0x1BC 0x41C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK 0x1BC 0x41C 0x000 0x6 0x0 #define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0x1C0 0x420 0x4E4 0x0 0x1 #define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI2_RX_DATA03 0x1C0 0x420 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00 0x1C0 0x420 0x4F8 0x2 0x2 #define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x1C0 0x420 0x5EC 0x4 0x3 #define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS 0x1C0 0x420 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x1C0 0x420 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01 0x1C0 0x420 0x4C4 0x6 0x7 -#define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00 0x1C0 0x420 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_PDM_BIT_STREAM01 0x1C0 0x420 0x4C4 0x6 0x7 #define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x1C4 0x424 0x4EC 0x0 0x1 #define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01 0x1C4 0x424 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI5_RX_DATA01 0x1C4 0x424 0x4FC 0x2 0x2 @@ -706,8 +605,7 @@ #define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX 0x1C4 0x424 0x5F0 0x4 0x4 #define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX 0x1C4 0x424 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x1C4 0x424 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03 0x1C4 0x424 0x4CC 0x6 0x6 -#define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01 0x1C4 0x424 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_PDM_BIT_STREAM03 0x1C4 0x424 0x4CC 0x6 0x6 #define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x1C8 0x428 0x4E8 0x0 0x1 #define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02 0x1C8 0x428 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI5_RX_DATA02 0x1C8 0x428 0x500 0x2 0x2 @@ -715,30 +613,26 @@ #define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX 0x1C8 0x428 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX 0x1C8 0x428 0x5F0 0x4 0x5 #define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x1C8 0x428 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02 0x1C8 0x428 0x4C8 0x6 0x7 -#define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02 0x1C8 0x428 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_PDM_BIT_STREAM02 0x1C8 0x428 0x4C8 0x6 0x7 #define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x1CC 0x42C 0x000 0x0 0x0 #define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03 0x1CC 0x42C 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI5_RX_DATA03 0x1CC 0x42C 0x504 0x2 0x2 #define MX8MP_IOMUXC_SAI3_TXD__GPT1_CAPTURE2 0x1CC 0x42C 0x598 0x3 0x0 -#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF_EXT_CLK 0x1CC 0x42C 0x548 0x4 0x0 +#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF1_EXT_CLK 0x1CC 0x42C 0x548 0x4 0x0 #define MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x1CC 0x42C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI3_TXD__CCMSRCGPCMIX_BOOT_MODE05 0x1CC 0x42C 0x000 0x6 0x0 -#define MX8MP_IOMUXC_SAI3_TXD__TPSMP_HDATA03 0x1CC 0x42C 0x000 0x7 0x0 #define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0x1D0 0x430 0x4E0 0x0 0x2 #define MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x1D0 0x430 0x000 0x1 0x0 #define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI5_MCLK 0x1D0 0x430 0x4F0 0x2 0x3 -#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_OUT 0x1D0 0x430 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_OUT 0x1D0 0x430 0x000 0x4 0x0 #define MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x1D0 0x430 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_IN 0x1D0 0x430 0x544 0x6 0x3 -#define MX8MP_IOMUXC_SAI3_MCLK__TPSMP_HDATA04 0x1D0 0x430 0x000 0x7 0x0 -#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF_OUT 0x1D4 0x434 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_IN 0x1D0 0x430 0x544 0x6 0x3 +#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF1_OUT 0x1D4 0x434 0x000 0x0 0x0 #define MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x1D4 0x434 0x000 0x1 0x0 #define MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x1D4 0x434 0x5C4 0x2 0x2 #define MX8MP_IOMUXC_SPDIF_TX__GPT1_COMPARE1 0x1D4 0x434 0x000 0x3 0x0 #define MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x1D4 0x434 0x000 0x4 0x0 #define MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x1D4 0x434 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF_IN 0x1D8 0x438 0x544 0x0 0x4 +#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF1_IN 0x1D8 0x438 0x544 0x0 0x4 #define MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT 0x1D8 0x438 0x000 0x1 0x0 #define MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x1D8 0x438 0x5C8 0x2 0x2 #define MX8MP_IOMUXC_SPDIF_RX__GPT1_COMPARE2 0x1D8 0x438 0x000 0x3 0x0 @@ -746,7 +640,7 @@ #define MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x1D8 0x438 0x000 0x5 0x0 #define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPT1_COMPARE3 0x1DC 0x43C 0x000 0x3 0x0 #define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x1DC 0x43C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF_EXT_CLK 0x1DC 0x43C 0x548 0x0 0x1 +#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF1_EXT_CLK 0x1DC 0x43C 0x548 0x0 0x1 #define MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x1DC 0x43C 0x000 0x1 0x0 #define MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1E0 0x440 0x558 0x0 0x0 #define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x1E0 0x440 0x5F8 0x1 0x4 @@ -754,125 +648,105 @@ #define MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL 0x1E0 0x440 0x5A4 0x2 0x1 #define MX8MP_IOMUXC_ECSPI1_SCLK__AUDIOMIX_SAI7_RX_SYNC 0x1E0 0x440 0x538 0x3 0x1 #define MX8MP_IOMUXC_ECSPI1_SCLK__GPIO5_IO06 0x1E0 0x440 0x000 0x5 0x0 -#define MX8MP_IOMUXC_ECSPI1_SCLK__TPSMP_HDATA08 0x1E0 0x440 0x000 0x7 0x0 #define MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1E4 0x444 0x560 0x0 0x0 #define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x1E4 0x444 0x000 0x1 0x0 #define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DTE_RX 0x1E4 0x444 0x5F8 0x1 0x5 #define MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA 0x1E4 0x444 0x5A8 0x2 0x1 #define MX8MP_IOMUXC_ECSPI1_MOSI__AUDIOMIX_SAI7_RX_BCLK 0x1E4 0x444 0x530 0x3 0x1 #define MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07 0x1E4 0x444 0x000 0x5 0x0 -#define MX8MP_IOMUXC_ECSPI1_MOSI__TPSMP_HDATA09 0x1E4 0x444 0x000 0x7 0x0 #define MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1E8 0x448 0x55C 0x0 0x0 #define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x1E8 0x448 0x000 0x1 0x0 #define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DTE_RTS 0x1E8 0x448 0x5F4 0x1 0x2 #define MX8MP_IOMUXC_ECSPI1_MISO__I2C2_SCL 0x1E8 0x448 0x5AC 0x2 0x1 #define MX8MP_IOMUXC_ECSPI1_MISO__AUDIOMIX_SAI7_RX_DATA00 0x1E8 0x448 0x534 0x3 0x1 #define MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x1E8 0x448 0x000 0x5 0x0 -#define MX8MP_IOMUXC_ECSPI1_MISO__TPSMP_HDATA10 0x1E8 0x448 0x000 0x7 0x0 #define MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0 0x1EC 0x44C 0x564 0x0 0x0 #define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x1EC 0x44C 0x5F4 0x1 0x3 #define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DTE_CTS 0x1EC 0x44C 0x000 0x1 0x0 #define MX8MP_IOMUXC_ECSPI1_SS0__I2C2_SDA 0x1EC 0x44C 0x5B0 0x2 0x1 #define MX8MP_IOMUXC_ECSPI1_SS0__AUDIOMIX_SAI7_TX_SYNC 0x1EC 0x44C 0x540 0x3 0x1 #define MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1EC 0x44C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_ECSPI1_SS0__TPSMP_HDATA11 0x1EC 0x44C 0x000 0x7 0x0 #define MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1F0 0x450 0x568 0x0 0x1 #define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX 0x1F0 0x450 0x600 0x1 0x6 #define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DTE_TX 0x1F0 0x450 0x000 0x1 0x0 #define MX8MP_IOMUXC_ECSPI2_SCLK__I2C3_SCL 0x1F0 0x450 0x5B4 0x2 0x3 #define MX8MP_IOMUXC_ECSPI2_SCLK__AUDIOMIX_SAI7_TX_BCLK 0x1F0 0x450 0x53C 0x3 0x1 #define MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10 0x1F0 0x450 0x000 0x5 0x0 -#define MX8MP_IOMUXC_ECSPI2_SCLK__TPSMP_HDATA12 0x1F0 0x450 0x000 0x7 0x0 #define MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1F4 0x454 0x570 0x0 0x1 #define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX 0x1F4 0x454 0x000 0x1 0x0 #define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DTE_RX 0x1F4 0x454 0x600 0x1 0x7 #define MX8MP_IOMUXC_ECSPI2_MOSI__I2C3_SDA 0x1F4 0x454 0x5B8 0x2 0x3 #define MX8MP_IOMUXC_ECSPI2_MOSI__AUDIOMIX_SAI7_TX_DATA00 0x1F4 0x454 0x000 0x3 0x0 #define MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11 0x1F4 0x454 0x000 0x5 0x0 -#define MX8MP_IOMUXC_ECSPI2_MOSI__TPSMP_HDATA13 0x1F4 0x454 0x000 0x7 0x0 #define MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12 0x1F8 0x458 0x000 0x5 0x0 -#define MX8MP_IOMUXC_ECSPI2_MISO__TPSMP_HDATA14 0x1F8 0x458 0x000 0x7 0x0 #define MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1F8 0x458 0x56C 0x0 0x1 #define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS 0x1F8 0x458 0x000 0x1 0x0 #define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DTE_RTS 0x1F8 0x458 0x5FC 0x1 0x2 #define MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL 0x1F8 0x458 0x5BC 0x2 0x4 #define MX8MP_IOMUXC_ECSPI2_MISO__AUDIOMIX_SAI7_MCLK 0x1F8 0x458 0x52C 0x3 0x1 -#define MX8MP_IOMUXC_ECSPI2_MISO__CCMSRCGPCMIX_CLKO1 0x1F8 0x458 0x000 0x4 0x0 +#define MX8MP_IOMUXC_ECSPI2_MISO__CCM_CLKO1 0x1F8 0x458 0x000 0x4 0x0 #define MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x1FC 0x45C 0x574 0x0 0x1 #define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS 0x1FC 0x45C 0x5FC 0x1 0x3 #define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DTE_CTS 0x1FC 0x45C 0x000 0x1 0x0 #define MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA 0x1FC 0x45C 0x5C0 0x2 0x4 -#define MX8MP_IOMUXC_ECSPI2_SS0__CCMSRCGPCMIX_CLKO2 0x1FC 0x45C 0x000 0x4 0x0 +#define MX8MP_IOMUXC_ECSPI2_SS0__CCM_CLKO2 0x1FC 0x45C 0x000 0x4 0x0 #define MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1FC 0x45C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_ECSPI2_SS0__TPSMP_HDATA15 0x1FC 0x45C 0x000 0x7 0x0 #define MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x200 0x460 0x5A4 0x0 0x2 #define MX8MP_IOMUXC_I2C1_SCL__ENET_QOS_MDC 0x200 0x460 0x000 0x1 0x0 #define MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x200 0x460 0x558 0x3 0x1 #define MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x200 0x460 0x000 0x5 0x0 -#define MX8MP_IOMUXC_I2C1_SCL__TPSMP_HDATA16 0x200 0x460 0x000 0x7 0x0 #define MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x204 0x464 0x5A8 0x0 0x2 #define MX8MP_IOMUXC_I2C1_SDA__ENET_QOS_MDIO 0x204 0x464 0x590 0x1 0x2 #define MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x204 0x464 0x560 0x3 0x1 #define MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x204 0x464 0x000 0x5 0x0 -#define MX8MP_IOMUXC_I2C1_SDA__TPSMP_HDATA17 0x204 0x464 0x000 0x7 0x0 #define MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x208 0x468 0x5AC 0x0 0x2 #define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_IN 0x208 0x468 0x000 0x1 0x0 #define MX8MP_IOMUXC_I2C2_SCL__USDHC3_CD_B 0x208 0x468 0x608 0x2 0x3 #define MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x208 0x468 0x55C 0x3 0x1 #define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_AUX_IN 0x208 0x468 0x000 0x4 0x0 #define MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x208 0x468 0x000 0x5 0x0 -#define MX8MP_IOMUXC_I2C2_SCL__TPSMP_HDATA18 0x208 0x468 0x000 0x7 0x0 #define MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x20C 0x46C 0x5B0 0x0 0x2 #define MX8MP_IOMUXC_I2C2_SDA__ENET_QOS_1588_EVENT1_OUT 0x20C 0x46C 0x000 0x1 0x0 #define MX8MP_IOMUXC_I2C2_SDA__USDHC3_WP 0x20C 0x46C 0x634 0x2 0x3 #define MX8MP_IOMUXC_I2C2_SDA__ECSPI1_SS0 0x20C 0x46C 0x564 0x3 0x1 #define MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x20C 0x46C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_I2C2_SDA__TPSMP_HDATA19 0x20C 0x46C 0x000 0x7 0x0 #define MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x210 0x470 0x5B4 0x0 0x4 #define MX8MP_IOMUXC_I2C3_SCL__PWM4_OUT 0x210 0x470 0x000 0x1 0x0 #define MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK 0x210 0x470 0x000 0x2 0x0 #define MX8MP_IOMUXC_I2C3_SCL__ECSPI2_SCLK 0x210 0x470 0x568 0x3 0x2 #define MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x210 0x470 0x000 0x5 0x0 -#define MX8MP_IOMUXC_I2C3_SCL__TPSMP_HDATA20 0x210 0x470 0x000 0x7 0x0 #define MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x214 0x474 0x5B8 0x0 0x4 #define MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x214 0x474 0x000 0x1 0x0 #define MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK 0x214 0x474 0x000 0x2 0x0 #define MX8MP_IOMUXC_I2C3_SDA__ECSPI2_MOSI 0x214 0x474 0x570 0x3 0x2 #define MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x214 0x474 0x000 0x5 0x0 -#define MX8MP_IOMUXC_I2C3_SDA__TPSMP_HDATA21 0x214 0x474 0x000 0x7 0x0 #define MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x218 0x478 0x5BC 0x0 0x5 #define MX8MP_IOMUXC_I2C4_SCL__PWM2_OUT 0x218 0x478 0x000 0x1 0x0 -#define MX8MP_IOMUXC_I2C4_SCL__HSIOMIX_PCIE_CLKREQ_B 0x218 0x478 0x5A0 0x2 0x0 +#define MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x218 0x478 0x5A0 0x2 0x0 #define MX8MP_IOMUXC_I2C4_SCL__ECSPI2_MISO 0x218 0x478 0x56C 0x3 0x2 #define MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x218 0x478 0x000 0x5 0x0 -#define MX8MP_IOMUXC_I2C4_SCL__TPSMP_HDATA22 0x218 0x478 0x000 0x7 0x0 #define MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x21C 0x47C 0x5C0 0x0 0x5 #define MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT 0x21C 0x47C 0x000 0x1 0x0 #define MX8MP_IOMUXC_I2C4_SDA__ECSPI2_SS0 0x21C 0x47C 0x574 0x3 0x2 #define MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x21C 0x47C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_I2C4_SDA__TPSMP_HDATA23 0x21C 0x47C 0x000 0x7 0x0 #define MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x220 0x480 0x5E8 0x0 0x4 #define MX8MP_IOMUXC_UART1_RXD__UART1_DTE_TX 0x220 0x480 0x000 0x0 0x0 #define MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x220 0x480 0x000 0x1 0x0 #define MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x220 0x480 0x000 0x5 0x0 -#define MX8MP_IOMUXC_UART1_RXD__TPSMP_HDATA24 0x220 0x480 0x000 0x7 0x0 #define MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x224 0x484 0x000 0x0 0x0 #define MX8MP_IOMUXC_UART1_TXD__UART1_DTE_RX 0x224 0x484 0x5E8 0x0 0x5 #define MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x224 0x484 0x000 0x1 0x0 #define MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x224 0x484 0x000 0x5 0x0 -#define MX8MP_IOMUXC_UART1_TXD__TPSMP_HDATA25 0x224 0x484 0x000 0x7 0x0 #define MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x228 0x488 0x5F0 0x0 0x6 #define MX8MP_IOMUXC_UART2_RXD__UART2_DTE_TX 0x228 0x488 0x000 0x0 0x0 #define MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x228 0x488 0x000 0x1 0x0 #define MX8MP_IOMUXC_UART2_RXD__GPT1_COMPARE3 0x228 0x488 0x000 0x3 0x0 #define MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24 0x228 0x488 0x000 0x5 0x0 -#define MX8MP_IOMUXC_UART2_RXD__TPSMP_HDATA26 0x228 0x488 0x000 0x7 0x0 #define MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x22C 0x48C 0x000 0x0 0x0 #define MX8MP_IOMUXC_UART2_TXD__UART2_DTE_RX 0x22C 0x48C 0x5F0 0x0 0x7 #define MX8MP_IOMUXC_UART2_TXD__ECSPI3_SS0 0x22C 0x48C 0x000 0x1 0x0 #define MX8MP_IOMUXC_UART2_TXD__GPT1_COMPARE2 0x22C 0x48C 0x000 0x3 0x0 #define MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x22C 0x48C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_UART2_TXD__TPSMP_HDATA27 0x22C 0x48C 0x000 0x7 0x0 #define MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x230 0x490 0x5F8 0x0 0x6 #define MX8MP_IOMUXC_UART3_RXD__UART3_DTE_TX 0x230 0x490 0x000 0x0 0x0 #define MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS 0x230 0x490 0x000 0x1 0x0 @@ -881,7 +755,6 @@ #define MX8MP_IOMUXC_UART3_RXD__GPT1_CAPTURE2 0x230 0x490 0x598 0x3 0x1 #define MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x230 0x490 0x000 0x4 0x0 #define MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x230 0x490 0x000 0x5 0x0 -#define MX8MP_IOMUXC_UART3_RXD__TPSMP_HDATA28 0x230 0x490 0x000 0x7 0x0 #define MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x234 0x494 0x000 0x0 0x0 #define MX8MP_IOMUXC_UART3_TXD__UART3_DTE_RX 0x234 0x494 0x5F8 0x0 0x7 #define MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x234 0x494 0x5E4 0x1 0x5 @@ -890,16 +763,14 @@ #define MX8MP_IOMUXC_UART3_TXD__GPT1_CLK 0x234 0x494 0x59C 0x3 0x1 #define MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x234 0x494 0x550 0x4 0x2 #define MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x234 0x494 0x000 0x5 0x0 -#define MX8MP_IOMUXC_UART3_TXD__TPSMP_HDATA29 0x234 0x494 0x000 0x7 0x0 #define MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x238 0x498 0x600 0x0 0x8 #define MX8MP_IOMUXC_UART4_RXD__UART4_DTE_TX 0x238 0x498 0x000 0x0 0x0 #define MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS 0x238 0x498 0x000 0x1 0x0 #define MX8MP_IOMUXC_UART4_RXD__UART2_DTE_RTS 0x238 0x498 0x5EC 0x1 0x4 -#define MX8MP_IOMUXC_UART4_RXD__HSIOMIX_PCIE_CLKREQ_B 0x238 0x498 0x5A0 0x2 0x1 +#define MX8MP_IOMUXC_UART4_RXD__PCIE_CLKREQ_B 0x238 0x498 0x5A0 0x2 0x1 #define MX8MP_IOMUXC_UART4_RXD__GPT1_COMPARE1 0x238 0x498 0x000 0x3 0x0 #define MX8MP_IOMUXC_UART4_RXD__I2C6_SCL 0x238 0x498 0x5CC 0x4 0x2 #define MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28 0x238 0x498 0x000 0x5 0x0 -#define MX8MP_IOMUXC_UART4_RXD__TPSMP_HDATA30 0x238 0x498 0x000 0x7 0x0 #define MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x23C 0x49C 0x000 0x0 0x0 #define MX8MP_IOMUXC_UART4_TXD__UART4_DTE_RX 0x23C 0x49C 0x600 0x0 0x9 #define MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS 0x23C 0x49C 0x5EC 0x1 0x5 @@ -907,23 +778,20 @@ #define MX8MP_IOMUXC_UART4_TXD__GPT1_CAPTURE1 0x23C 0x49C 0x594 0x3 0x1 #define MX8MP_IOMUXC_UART4_TXD__I2C6_SDA 0x23C 0x49C 0x5D0 0x4 0x2 #define MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29 0x23C 0x49C 0x000 0x5 0x0 -#define MX8MP_IOMUXC_UART4_TXD__TPSMP_HDATA31 0x23C 0x49C 0x000 0x7 0x0 -#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_EARC_SCL 0x240 0x4A0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x240 0x4A0 0x000 0x0 0x0 #define MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x240 0x4A0 0x5C4 0x3 0x3 #define MX8MP_IOMUXC_HDMI_DDC_SCL__CAN1_TX 0x240 0x4A0 0x000 0x4 0x0 #define MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x240 0x4A0 0x000 0x5 0x0 -#define MX8MP_IOMUXC_HDMI_DDC_SCL__AUDIOMIX_test_out00 0x240 0x4A0 0x000 0x6 0x0 -#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_EARC_SDA 0x244 0x4A4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x244 0x4A4 0x000 0x0 0x0 #define MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x244 0x4A4 0x5C8 0x3 0x3 #define MX8MP_IOMUXC_HDMI_DDC_SDA__CAN1_RX 0x244 0x4A4 0x54C 0x4 0x3 #define MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x244 0x4A4 0x000 0x5 0x0 -#define MX8MP_IOMUXC_HDMI_DDC_SDA__AUDIOMIX_test_out01 0x244 0x4A4 0x000 0x6 0x0 -#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_EARC_CEC 0x248 0x4A8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x248 0x4A8 0x000 0x0 0x0 #define MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL 0x248 0x4A8 0x5CC 0x3 0x3 #define MX8MP_IOMUXC_HDMI_CEC__CAN2_TX 0x248 0x4A8 0x000 0x4 0x0 #define MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28 0x248 0x4A8 0x000 0x5 0x0 -#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_EARC_DC_HPD 0x24C 0x4AC 0x000 0x0 0x0 -#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_EARC_HDMI_HPD_O 0x24C 0x4AC 0x000 0x1 0x0 +#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x24C 0x4AC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_HDMI_HPD_O 0x24C 0x4AC 0x000 0x1 0x0 #define MX8MP_IOMUXC_HDMI_HPD__I2C6_SDA 0x24C 0x4AC 0x5D0 0x3 0x3 #define MX8MP_IOMUXC_HDMI_HPD__CAN2_RX 0x24C 0x4AC 0x550 0x4 0x3 #define MX8MP_IOMUXC_HDMI_HPD__GPIO3_IO29 0x24C 0x4AC 0x000 0x5 0x0 diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index a5154f13a18e..6038f66aefc1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -713,7 +713,8 @@ reg = <0x30be0000 0x10000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_ENET1_ROOT>, <&clk IMX8MP_CLK_SIM_ENET_ROOT>, <&clk IMX8MP_CLK_ENET_TIMER>, diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index c9241abf0df3..2418cca00bc5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -132,13 +132,15 @@ }; }; +&dphy { + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; - phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; fsl,magic-packet; status = "okay"; @@ -149,6 +151,8 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; }; }; }; @@ -157,7 +161,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wifi_reset>; - wl-reg-on { + wl-reg-on-hog { gpio-hog; gpios = <29 GPIO_ACTIVE_HIGH>; output-high; @@ -255,6 +259,40 @@ }; }; +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + pinctrl-0 = <&pinctrl_mipi_dsi>; + pinctrl-names = "default"; + compatible = "raydium,rm67191"; + reg = <0>; + reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + dsi-lanes = <4>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + &pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; @@ -388,6 +426,12 @@ >; }; + pinctrl_mipi_dsi: mipidsigrp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x16 + >; + }; + pinctrl_pcie0: pcie0grp { fsl,pins = < MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76 @@ -407,7 +451,7 @@ >; }; - pinctrl_reg_usdhc2: regusdhc2grpgpio { + pinctrl_reg_usdhc2: regusdhc2gpiogrp { fsl,pins = < MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 >; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts index bfd91c1ed6a5..366693f31992 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts @@ -214,13 +214,13 @@ >; }; - pinctrl_usdhc2_gpio: usdhc2grpgpio { + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 >; }; - pinctrl_usdhc2_vmmc: usdhc2vmmcgpio { + pinctrl_usdhc2_vmmc: usdhc2vmmcgpiogrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41 >; @@ -238,7 +238,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd @@ -250,7 +250,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 6900ac274f5b..af139b283daf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dt-bindings/input/input.h" +#include <dt-bindings/interrupt-controller/irq.h> #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/usb/pd.h" #include "imx8mq.dtsi" @@ -60,7 +61,7 @@ label = "WWAN_WAKE"; gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; - interrupts = <8 GPIO_ACTIVE_LOW>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; wakeup-source; linux,code = <KEY_PHONE>; }; @@ -285,10 +286,10 @@ pinctrl-0 = <&pinctrl_pmic>; clocks = <&pmic_osc>; clock-names = "osc"; + #clock-cells = <0>; clock-output-names = "pmic_clk"; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; - interrupt-names = "irq"; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; regulators { @@ -734,7 +735,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd @@ -751,7 +752,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf @@ -768,13 +769,13 @@ >; }; - pinctrl_usdhc2_pwr: usdhc2grppwr { + pinctrl_usdhc2_pwr: usdhc2pwrgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 >; }; - pinctrl_usdhc2_gpio: usdhc2grpgpio { + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 /* WIFI_WAKE */ >; @@ -791,7 +792,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd @@ -802,7 +803,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf @@ -834,6 +835,39 @@ }; }; +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + backlight = <&backlight_dsi>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + iovcc-supply = <®_1v8_p>; + vcc-supply = <®_2v8_p>; + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + &pgc_gpu { power-supply = <&buck3_reg>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts new file mode 100644 index 000000000000..d77fc5df3f06 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Purism SPC <kernel@puri.sm> +// +// Librem 5 Chestnut + +/dts-v1/; + +#include "imx8mq-librem5.dtsi" + +/ { + model = "Purism Librem 5r2"; + compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq"; +}; + +&bq25895 { + ti,battery-regulation-voltage = <4192000>; /* uV */ + ti,charge-current = <1600000>; /* uA */ + ti,termination-current = <66000>; /* uA */ +}; + +&accel_gyro { + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; +}; + +&proximity { + proximity-near-level = <220>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts new file mode 100644 index 000000000000..6704ea2c72a3 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Purism SPC <kernel@puri.sm> + +/dts-v1/; + +#include "imx8mq-librem5.dtsi" + +/ { + model = "Purism Librem 5r3"; + compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq"; +}; + +&accel_gyro { + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; +}; + +&bq25895 { + ti,battery-regulation-voltage = <4200000>; /* uV */ + ti,charge-current = <1500000>; /* uA */ + ti,termination-current = <144000>; /* uA */ +}; + +&proximity { + proximity-near-level = <25>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi new file mode 100644 index 000000000000..e3c6d1272198 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -0,0 +1,1106 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 Purism SPC + */ + +/dts-v1/; + +#include "dt-bindings/input/input.h" +#include <dt-bindings/interrupt-controller/irq.h> +#include "dt-bindings/pwm/pwm.h" +#include "dt-bindings/usb/pd.h" +#include "imx8mq.dtsi" + +/ { + model = "Purism Librem 5"; + compatible = "purism,librem5", "fsl,imx8mq"; + + backlight_dsi: backlight-dsi { + compatible = "led-backlight"; + leds = <&led_backlight>; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keys>; + + vol-down { + label = "VOL_DOWN"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + vol-up { + label = "VOL_UP"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reg_aud_1v8: regulator-audio-1v8 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audiopwr>; + regulator-name = "AUDIO_PWR_EN"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_gnss: regulator-gnss { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gnsspwr>; + regulator-name = "GNSS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_hub: regulator-hub { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hub_pwr>; + regulator-name = "HUB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_3v4: regulator-lcd-3v4 { + compatible = "regulator-fixed"; + regulator-name = "LCD_3V4"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsibiasen>; + vin-supply = <®_vsys_3v4>; + gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vdd_sen: regulator-vdd-sen { + compatible = "regulator-fixed"; + regulator-name = "VDD_SEN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vdd_3v3: regulator-vdd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vsys_3v4: regulator-vsys-3v4 { + compatible = "regulator-fixed"; + regulator-name = "VSYS_3V4"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + reg_wifi_3v3: regulator-wifi-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3_WIFI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; + simple-audio-card,name = "Librem 5"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Microphone", "Digital Mic", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Headphones", "HPOUTL", + "Headphones", "HPOUTR", + "Speaker", "SPKOUTL", + "Speaker", "SPKOUTR", + "Headset Mic", "MICBIAS", + "IN3R", "Headset Mic", + "DMICDAT", "Digital Mic"; + simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + frame-master; + bitclock-master; + }; + }; + + sound-wwan { + compatible = "simple-audio-card"; + simple-audio-card,name = "Modem"; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&sai6>; + frame-inversion; + }; + + simple-audio-card,codec { + sound-dai = <&bm818_codec>; + frame-master; + bitclock-master; + }; + }; + + bm818_codec: sound-wwan-codec { + compatible = "broadmobi,bm818", "option,gtm601"; + #sound-dai-cells = <0>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm1 0 1000000000 0>; + pwm-names = "enable"; + vcc-supply = <®_vdd_3v3>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: ddrc-opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; +}; + +&dphy { + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nor_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_5v>; + + pmic-5v { + gpio-hog; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + input; + }; +}; + +&iomuxc { + pinctrl_audiopwr: audiopwrgrp { + fsl,pins = < + /* AUDIO_POWER_EN_3V3 */ + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x83 + >; + }; + + pinctrl_bl: blgrp { + fsl,pins = < + /* BACKLINGE_EN */ + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x83 + >; + }; + + pinctrl_charger_in: chargeringrp { + fsl,pins = < + /* CHRG_INT */ + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x00 + /* CHG_STATUS_B */ + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80 + >; + }; + + pinctrl_dsibiasen: dsibiasengrp { + fsl,pins = < + /* DSI_BIAS_EN */ + MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20 0x83 + >; + }; + + pinctrl_dsien: dsiengrp { + fsl,pins = < + /* DSI_EN_3V3 */ + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x83 + >; + }; + + pinctrl_ecspi1: ecspigrp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83 + MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x83 + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x83 + >; + }; + + pinctrl_gauge: gaugegrp { + fsl,pins = < + /* BAT_LOW */ + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x80 + >; + }; + + pinctrl_gnsspwr: gnsspwrgrp { + fsl,pins = < + /* GPS3V3_EN */ + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x83 + >; + }; + + pinctrl_haptic: hapticgrp { + fsl,pins = < + /* MOTO */ + MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x83 + >; + }; + + pinctrl_hp: hpgrp { + fsl,pins = < + /* HEADPHONE_DET_1V8 */ + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x180 + >; + }; + + pinctrl_hub_pwr: hubpwrgrp { + fsl,pins = < + /* HUB_PWR_3V3_EN */ + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x83 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000026 + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000026 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000026 + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000026 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000026 + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000026 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000026 + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000026 + >; + }; + + pinctrl_keys: keysgrp { + fsl,pins = < + /* VOL- */ + MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17 0x01C0 + /* VOL+ */ + MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16 0x01C0 + >; + }; + + pinctrl_led_b: ledbgrp { + fsl,pins = < + /* LED_B */ + MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x06 + >; + }; + + pinctrl_led_g: ledggrp { + fsl,pins = < + /* LED_G */ + MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT 0x06 + >; + }; + + pinctrl_led_r: ledrgrp { + fsl,pins = < + /* LED_R */ + MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT 0x06 + >; + }; + + pinctrl_mag: maggrp { + fsl,pins = < + /* INT_MAG */ + MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x80 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + /* PMIC_NINT */ + MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x80 + >; + }; + + pinctrl_pmic_5v: pmic5vgrp { + fsl,pins = < + /* PMIC_5V */ + MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x80 + >; + }; + + pinctrl_prox: proxgrp { + fsl,pins = < + /* INT_LIGHT */ + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x80 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + /* RTC_INT */ + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + >; + }; + + pinctrl_sai6: sai6grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6 + >; + }; + + pinctrl_tcpc: tcpcgrp { + fsl,pins = < + /* TCPC_INT */ + MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x01C0 + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + /* TYPEC_MUX_EN */ + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x83 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 + MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 + MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + /* nWDOG */ + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x1f + >; + }; +}; + +&i2c1 { + clock-frequency = <387000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + typec_pd: usb-pd@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + + connector { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usb_con_ss: endpoint { + remote-endpoint = <&typec_ss>; + }; + }; + }; + }; + }; + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + clocks = <&pmic_osc>; + clock-names = "osc"; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + rohm,dvs-run-voltage = <900000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + rohm,dvs-run-voltage = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + /* VDD_PHY_0V9 - MIPI and HDMI domains */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + /* VDD_PHY_0V9 - MIPI, HDMI and USB domains */ + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + /* VDD_PHY_3V3 - USB domain */ + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <387000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + magnetometer@1e { + compatible = "st,lsm9ds1-magn"; + reg = <0x1e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio3>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + vdd-supply = <®_vdd_sen>; + vddio-supply = <®_vdd_1v8>; + }; + + regulator@3e { + compatible = "tps65132"; + reg = <0x3e>; + + outp { + regulator-name = "LCD_AVDD"; + vin-supply = <®_lcd_3v4>; + }; + + outn { + regulator-name = "LCD_AVEE"; + vin-supply = <®_lcd_3v4>; + }; + }; + + proximity: prox@60 { + compatible = "vishay,vcnl4040"; + reg = <0x60>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_prox>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; + + accel_gyro: accel-gyro@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + vdd-supply = <®_vdd_sen>; + vddio-supply = <®_vdd_1v8>; + }; +}; + +&i2c3 { + clock-frequency = <387000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + codec: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + #sound-dai-cells = <0>; + mic-cfg = <0x200>; + DCVDD-supply = <®_aud_1v8>; + DBVDD-supply = <®_aud_1v8>; + AVDD-supply = <®_aud_1v8>; + CPVDD-supply = <®_aud_1v8>; + MICVDD-supply = <®_aud_1v8>; + PLLVDD-supply = <®_aud_1v8>; + SPKVDD1-supply = <®_vsys_3v4>; + SPKVDD2-supply = <®_vsys_3v4>; + gpio-cfg = < + 0x0000 /* n/c */ + 0x0001 /* gpio2, 1: default */ + 0x0013 /* gpio3, 2: dmicclk */ + 0x0000 /* n/c, 3: default */ + 0x8014 /* gpio5, 4: dmic_dat */ + 0x0000 /* gpio6, 5: default */ + >; + }; + + backlight@36 { + compatible = "ti,lm36922"; + reg = <0x36>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bl>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + vled-supply = <®_vsys_3v4>; + ti,ovp-microvolt = <25000000>; + + led_backlight: led@0 { + reg = <0>; + label = ":backlight"; + linux,default-trigger = "backlight"; + led-max-microamp = <20000>; + }; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5506"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + +&i2c4 { + clock-frequency = <387000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + bat: fuel-gauge@36 { + compatible = "maxim,max17055"; + reg = <0x36>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gauge>; + maxim,over-heat-temp = <700>; + maxim,over-volt = <4500>; + maxim,rsns-microohm = <5000>; + }; + + bq25895: charger@6a { + compatible = "ti,bq25895", "ti,bq25890"; + reg = <0x6a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_in>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + phys = <&usb3_phy0>; + ti,precharge-current = <130000>; /* uA */ + ti,minimum-sys-voltage = <3700000>; /* uV */ + ti,boost-voltage = <5000000>; /* uV */ + ti,boost-max-current = <500000>; /* uA */ + ti,use-vinmin-threshold = <1>; /* enable VINDPM */ + ti,vinmin-threshold = <3900000>; /* uV */ + monitored-battery = <&bat>; + }; +}; + +&pgc_gpu { + power-supply = <&buck3_reg>; +}; + +&pgc_mipi { + power-supply = <&ldo5_reg>; +}; + +&pgc_vpu { + power-supply = <&buck4_reg>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_haptic>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_b>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_g>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_r>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; + assigned-clock-rates = <786432000>, <722534400>; + status = "okay"; +}; + +&sai6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai6>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI6>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-synchronous-rx; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { /* TPS - GPS - DEBUG */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; + + gnss { + compatible = "globaltop,pa6h"; + vcc-supply = <®_gnss>; + current-speed = <9600>; + }; +}; + +&uart3 { /* SMC */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_hub>; + status = "okay"; +}; + +&usb_dwc3_0 { + #address-cells = <1>; + #size-cells = <0>; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + status = "okay"; + + port@0 { + reg = <0>; + + typec_hs: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_ss: endpoint { + remote-endpoint = <&usb_con_ss>; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip USB2642 */ + hub@1 { + compatible = "usb424,2640"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + mass-storage@1 { + compatible = "usb424,4041"; + reg = <1>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + vmmc-supply = <®_vdd_3v3>; + power-supply = <®_vdd_1v8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <®_wifi_3v3>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + cap-sdio-irq; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts index 77ab568fae67..a3b9d615a3b4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx8mq.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Google i.MX8MQ Phanbell"; @@ -125,7 +126,7 @@ clocks = <&pmic_osc>; clock-output-names = "pmic_clk"; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; regulators { buck1: BUCK1 { @@ -262,9 +263,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <50>; phy-handle = <ðphy0>; fsl,magic-packet; status = "okay"; @@ -275,6 +273,9 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; }; }; }; @@ -365,7 +366,7 @@ >; }; - pinctrl_pmic: pmicirq { + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 >; @@ -395,7 +396,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 @@ -412,7 +413,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 @@ -429,7 +430,7 @@ >; }; - pinctrl_usdhc2_gpio: usdhc2grpgpio { + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 @@ -448,7 +449,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 @@ -460,7 +461,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts index 59da96b7143f..89cbec5c41b2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "imx8mq.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "TechNexion PICO-PI-8M"; @@ -70,7 +71,7 @@ clock-names = "osc"; clock-output-names = "pmic_clk"; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "irq"; regulators { @@ -297,7 +298,7 @@ >; }; - pinctrl_pmic: pmicirq { + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 >; @@ -335,7 +336,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 @@ -351,7 +352,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 @@ -367,7 +368,7 @@ >; }; - pinctrl_usdhc2_gpio: usdhc2grpgpio { + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 >; @@ -385,7 +386,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 @@ -397,7 +398,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi index 602c870a7ccb..0187890a90c5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi @@ -20,8 +20,6 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; - phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - phy-reset-duration = <2>; fsl,magic-packet; status = "okay"; @@ -32,6 +30,8 @@ ethphy0: ethernet-phy@4 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <4>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <2000>; }; }; }; @@ -275,7 +275,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd @@ -292,7 +292,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts index b4795a032fa2..5d5aa6537225 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts @@ -122,7 +122,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; phy-handle = <ðphy>; fsl,magic-packet; status = "okay"; @@ -134,6 +133,7 @@ ethphy: ethernet-phy@3 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <3>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts index 6b3581366d67..bfad4b885905 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts @@ -15,7 +15,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 0d1088dcaa02..fa7a041ffcfd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -229,28 +229,28 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio3_hog>; - usb-emulation { + usb-emulation-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; output-low; line-name = "usb-emulation"; }; - usb-mode1 { + usb-mode1-hog { gpio-hog; gpios = <11 GPIO_ACTIVE_HIGH>; output-high; line-name = "usb-mode1"; }; - usb-pwr { + usb-pwr-hog { gpio-hog; gpios = <12 GPIO_ACTIVE_LOW>; output-high; line-name = "usb-pwr-ctrl-en-n"; }; - usb-mode2 { + usb-mode2-hog { gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 561fa792fe5a..5e0e7d0f1bc4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -523,6 +523,12 @@ <&clk IMX8MQ_VIDEO_PLL1_OUT>; assigned-clock-rates = <0>, <0>, <0>, <594000000>; status = "disabled"; + + port@0 { + lcdif_mipi_dsi: endpoint { + remote-endpoint = <&mipi_dsi_lcdif_in>; + }; + }; }; iomuxc: pinctrl@30330000 { @@ -617,6 +623,7 @@ gpc: gpc@303a0000 { compatible = "fsl,imx8mq-gpc"; reg = <0x303a0000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; interrupt-controller; #interrupt-cells = <3>; @@ -899,6 +906,49 @@ }; }; + mipi_dsi: mipi-dsi@30a00000 { + compatible = "fsl,imx8mq-nwl-dsi"; + reg = <0x30a00000 0x300>; + clocks = <&clk IMX8MQ_CLK_DSI_CORE>, + <&clk IMX8MQ_CLK_DSI_AHB>, + <&clk IMX8MQ_CLK_DSI_IPG_DIV>, + <&clk IMX8MQ_CLK_DSI_PHY_REF>, + <&clk IMX8MQ_CLK_LCDIF_PIXEL>; + clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif"; + assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>, + <&clk IMX8MQ_CLK_DSI_CORE>, + <&clk IMX8MQ_CLK_DSI_IPG_DIV>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>, + <&clk IMX8MQ_SYS1_PLL_266M>; + assigned-clock-rates = <80000000>, <266000000>, <20000000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + mux-controls = <&mux 0>; + power-domains = <&pgc_mipi>; + phys = <&dphy>; + phy-names = "dphy"; + resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>, + <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>; + reset-names = "byte", "dpi", "esc", "pclk"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + mipi_dsi_lcdif_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_mipi_dsi>; + }; + }; + }; + }; + dphy: dphy@30a00300 { compatible = "fsl,imx8mq-mipi-dphy"; reg = <0x30a00300 0x100>; @@ -1031,7 +1081,8 @@ reg = <0x30be0000 0x10000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>, <&clk IMX8MQ_CLK_ENET1_ROOT>, <&clk IMX8MQ_CLK_ENET_TIMER>, diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi index 75f17a29f81e..f38acff0d25c 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi @@ -494,7 +494,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 @@ -511,7 +511,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 @@ -554,7 +554,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ @@ -566,7 +566,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index c1b614dabb8e..963300eede17 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -530,7 +530,7 @@ rt1711h: rt1711h@4e { compatible = "richtek,rt1711h"; reg = <0x4e>; - status = "ok"; + status = "okay"; interrupt-parent = <&gpio27>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; @@ -570,7 +570,7 @@ }; adv7533: adv7533@39 { - status = "ok"; + status = "okay"; compatible = "adi,adv7533"; reg = <0x39>; adi,dsi-lanes = <4>; @@ -656,7 +656,7 @@ &sdio_cfg_func>; /* WL_EN */ vmmc-supply = <&wlan_en>; - status = "ok"; + status = "okay"; wlcore: wlcore@2 { compatible = "ti,wl1837"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index d25aac5e0bf8..994140fbc916 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1089,16 +1089,18 @@ compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xe8a06000 0x0 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg_ctrl HI3660_OSC32K>; - clock-names = "apb_pclk"; + clocks = <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>; + clock-names = "wdog_clk", "apb_pclk"; }; watchdog1: watchdog@e8a07000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xe8a07000 0x0 0x1000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg_ctrl HI3660_OSC32K>; - clock-names = "apb_pclk"; + clocks = <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>; + clock-names = "wdog_clk", "apb_pclk"; }; tsensor: tsensor@fff30000 { diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index 7dac33d4fd5c..7f9f9886c349 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -418,7 +418,7 @@ &sdio_cfg_func>; /* WL_EN */ vmmc-supply = <&wlan_en>; - status = "ok"; + status = "okay"; wlcore: wlcore@2 { compatible = "ti,wl1837"; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 533ed523888d..91d08673c02e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -267,7 +267,7 @@ &uart1 { assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; assigned-clock-rates = <150000000>; - status = "ok"; + status = "okay"; bluetooth { compatible = "ti,wl1835-st"; @@ -278,21 +278,21 @@ }; &uart2 { - status = "ok"; + status = "okay"; label = "LS-UART0"; }; &uart3 { - status = "ok"; + status = "okay"; label = "LS-UART1"; }; &ade { - status = "ok"; + status = "okay"; }; &dsi { - status = "ok"; + status = "okay"; ports { /* 1 for output port */ @@ -489,17 +489,17 @@ &i2c0 { - status = "ok"; + status = "okay"; }; &i2c1 { - status = "ok"; + status = "okay"; }; &i2c2 { #address-cells = <1>; #size-cells = <0>; - status = "ok"; + status = "okay"; adv7533: adv7533@39 { compatible = "adi,adv7533"; @@ -541,5 +541,5 @@ }; &spi0 { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 3d189d9f0d24..014735a9bc73 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -371,7 +371,7 @@ clocks = <&sys_ctrl HI6220_EDMAC_ACLK>; dma-no-cci; dma-type = "hi6220_dma"; - status = "ok"; + status = "okay"; }; dual_timer0: timer@f8008000 { @@ -843,8 +843,9 @@ compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xf8005000 0x0 0x1000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ao_ctrl HI6220_WDT0_PCLK>; - clock-names = "apb_pclk"; + clocks = <&ao_ctrl HI6220_WDT0_PCLK>, + <&ao_ctrl HI6220_WDT0_PCLK>; + clock-names = "wdog_clk", "apb_pclk"; }; tsensor: tsensor@0,f7030700 { diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts index e93c65ede06c..369b69b17b91 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts @@ -42,15 +42,15 @@ }; &uart0 { - status = "ok"; + status = "okay"; }; &peri_gpio0 { - status = "ok"; + status = "okay"; }; &lbc { - status = "ok"; + status = "okay"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0x0 0x90000000 0x08000000>, diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts index 677862beebef..9f4a930e734d 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -22,37 +22,37 @@ }; &ipmi0 { - status = "ok"; + status = "okay"; }; &uart0 { - status = "ok"; + status = "okay"; }; ð0 { - status = "ok"; + status = "okay"; }; ð1 { - status = "ok"; + status = "okay"; }; ð2 { - status = "ok"; + status = "okay"; }; ð3 { - status = "ok"; + status = "okay"; }; &sas1 { - status = "ok"; + status = "okay"; }; &usb_ohci { - status = "ok"; + status = "okay"; }; &usb_ehci { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts index fcbdffe0868b..81a2312c8a26 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts +++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts @@ -50,41 +50,41 @@ }; &uart0 { - status = "ok"; + status = "okay"; }; &ipmi0 { - status = "ok"; + status = "okay"; }; &usb_ohci { - status = "ok"; + status = "okay"; }; &usb_ehci { - status = "ok"; + status = "okay"; }; ð0 { - status = "ok"; + status = "okay"; }; ð1 { - status = "ok"; + status = "okay"; }; ð2 { - status = "ok"; + status = "okay"; }; ð3 { - status = "ok"; + status = "okay"; }; &sas1 { - status = "ok"; + status = "okay"; }; &p0_pcie2_a { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index 9d7f19e97df7..e1c0fcba5c20 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -20,7 +20,7 @@ service_reserved: svcbuffer@0 { compatible = "shared-dma-pool"; - reg = <0x0 0x0 0x0 0x1000000>; + reg = <0x0 0x0 0x0 0x2000000>; alignment = <0x1000>; no-map; }; @@ -149,8 +149,8 @@ snps,multicast-filter-bins = <256>; iommus = <&smmu 1>; altr,sysmgr-syscon = <&sysmgr 0x44 0>; - clocks = <&clkmgr AGILEX_EMAC0_CLK>; - clock-names = "stmmaceth"; + clocks = <&clkmgr AGILEX_EMAC0_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>; + clock-names = "stmmaceth", "ptp_ref"; status = "disabled"; }; @@ -167,8 +167,8 @@ snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; altr,sysmgr-syscon = <&sysmgr 0x48 8>; - clocks = <&clkmgr AGILEX_EMAC1_CLK>; - clock-names = "stmmaceth"; + clocks = <&clkmgr AGILEX_EMAC1_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>; + clock-names = "stmmaceth", "ptp_ref"; status = "disabled"; }; @@ -185,8 +185,8 @@ snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; altr,sysmgr-syscon = <&sysmgr 0x4c 16>; - clocks = <&clkmgr AGILEX_EMAC2_CLK>; - clock-names = "stmmaceth"; + clocks = <&clkmgr AGILEX_EMAC2_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>; + clock-names = "stmmaceth", "ptp_ref"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index 64f3b135068d..081fe7a9f605 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -131,18 +131,18 @@ ranges; timers: timer@fd100000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x0 0xfd100000 0x1000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; + clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; wdog: watchdog@fd200000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xfd200000 0x1000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "wdog_clk", "apb_pclk"; }; uart0: serial@fe000000 { compatible = "arm,pl011", "arm,primecell"; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index ac23592ab011..604bb6975337 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -131,18 +131,18 @@ ranges; timers: timer@fd100000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x0 0xfd100000 0x1000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; + clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; wdog: watchdog@fd200000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xfd200000 0x1000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "wdog_clk", "apb_pclk"; }; uart0: serial@fe000000 { compatible = "arm,pl011", "arm,primecell"; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index a5a12b2599a4..44a0346133cd 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/regulator/dlg,da9211-regulator.h> #include <dt-bindings/gpio/gpio.h> #include "mt8173.dtsi" @@ -294,7 +295,8 @@ regulator-max-microamp = <4400000>; regulator-ramp-delay = <10000>; regulator-always-on; - regulator-allowed-modes = <0 1>; + regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC + DA9211_BUCK_MODE_AUTO>; }; da9211_vgpu_reg: BUCKB { @@ -431,12 +433,11 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nor_gpio1_pins>; - bus-width = <8>; - max-frequency = <50000000>; - non-removable; + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; + spi-max-frequency = <50000000>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index ae405bd8f06b..cba2d8933e79 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -25,6 +25,17 @@ chosen { stdout-path = "serial0:921600n8"; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + scp_mem_reserved: scp_mem_region { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + }; }; &auxadc { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index f0a070535b34..85f7c33ba446 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -90,6 +90,18 @@ regulator-max-microvolt = <3300000>; }; + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem_reserved: scp_mem_region { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + }; + max98357a: codec0 { compatible = "maxim,max98357a"; sdmode-gpios = <&pio 175 0>; @@ -524,6 +536,13 @@ }; }; + scp_pins: scp { + pins_scp_uart { + pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>, + <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>; + }; + }; + spi0_pins: spi0 { pins_spi{ pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>, @@ -651,6 +670,17 @@ }; }; +&scp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&scp_pins>; + + cros_ec { + compatible = "google,cros-ec-rpmsg"; + mtk,rpmsg-name = "cros-ec-rpmsg"; + }; +}; + &soc_data { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 102105871db2..9cfd961c45eb 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -317,8 +317,7 @@ }; watchdog: watchdog@10007000 { - compatible = "mediatek,mt8183-wdt", - "mediatek,mt6589-wdt"; + compatible = "mediatek,mt8183-wdt"; reg = <0 0x10007000 0 0x100>; #reset-cells = <1>; }; @@ -339,6 +338,18 @@ clock-names = "spi", "wrap"; }; + scp: scp@10500000 { + compatible = "mediatek,mt8183-scp"; + reg = <0 0x10500000 0 0x80000>, + <0 0x105c0000 0 0x19080>; + reg-names = "sram", "cfg"; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_SCPSYS>; + clock-names = "main"; + memory-region = <&scp_mem_reserved>; + status = "disabled"; + }; + systimer: timer@10017000 { compatible = "mediatek,mt8183-timer", "mediatek,mt6765-timer"; diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi index dfceffe6950a..29d8cf6df46b 100644 --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi @@ -56,7 +56,7 @@ tca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; - rst-gpio = <&pio 65 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 65 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index cf712e80615d..3cb01c39c3c8 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/microchip,sparx5.h> / { compatible = "microchip,sparx5"; @@ -13,6 +14,7 @@ #size-cells = <1>; aliases { + spi0 = &spi0; serial0 = &uart0; serial1 = &uart1; }; @@ -117,6 +119,22 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + cpu_ctrl: syscon@600000000 { + compatible = "microchip,sparx5-cpu-syscon", "syscon", + "simple-mfd"; + reg = <0x6 0x00000000 0xd0>; + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <0>; + /* + * SI_OWNER and SI2_OWNER in GENERAL_CTRL + * SPI: value 9 - (SIMC,SIBM) = 0b1001 + * SPI2: value 6 - (SIBM,SIMC) = 0b0110 + */ + mux-reg-masks = <0x88 0xf0>; + }; + }; + uart0: serial@600100000 { pinctrl-0 = <&uart_pins>; pinctrl-names = "default"; @@ -143,6 +161,19 @@ status = "disabled"; }; + spi0: spi@600104000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-spi"; + reg = <0x6 0x00104000 0x40>; + num-cs = <16>; + reg-io-width = <4>; + reg-shift = <2>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + timer1: timer@600105000 { compatible = "snps,dw-apb-timer"; reg = <0x6 0x00105000 0x1000>; @@ -151,6 +182,20 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; }; + sdhci0: mmc@600800000 { + compatible = "microchip,dw-sparx5-sdhci"; + status = "disabled"; + reg = <0x6 0x00800000 0x1000>; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + clocks = <&clks CLK_ID_AUX1>; + clock-names = "core"; + assigned-clocks = <&clks CLK_ID_AUX1>; + assigned-clock-rates = <800000000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + }; + gpio: pinctrl@6110101e0 { compatible = "microchip,sparx5-pinctrl"; reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>; @@ -161,6 +206,26 @@ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; + cs1_pins: cs1-pins { + pins = "GPIO_16"; + function = "si"; + }; + + cs2_pins: cs2-pins { + pins = "GPIO_17"; + function = "si"; + }; + + cs3_pins: cs3-pins { + pins = "GPIO_18"; + function = "si"; + }; + + si2_pins: si2-pins { + pins = "GPIO_39", "GPIO_40", "GPIO_41"; + function = "si2"; + }; + uart_pins: uart-pins { pins = "GPIO_10", "GPIO_11"; function = "uart"; @@ -180,6 +245,15 @@ pins = "GPIO_28", "GPIO_29"; function = "twi2"; }; + + emmc_pins: emmc-pins { + pins = "GPIO_34", "GPIO_35", "GPIO_36", + "GPIO_37", "GPIO_38", "GPIO_39", + "GPIO_40", "GPIO_41", "GPIO_42", + "GPIO_43", "GPIO_44", "GPIO_45", + "GPIO_46", "GPIO_47"; + function = "emmc"; + }; }; i2c0: i2c@600101000 { @@ -209,5 +283,12 @@ clock-frequency = <100000>; clocks = <&ahb_clk>; }; + + tmon0: tmon@610508110 { + compatible = "microchip,sparx5-temp"; + reg = <0x6 0x10508110 0xc>; + #thermal-sensor-cells = <0>; + clocks = <&ahb_clk>; + }; }; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi new file mode 100644 index 000000000000..03f107e427d7 --- /dev/null +++ b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +&gpio { + cs14_pins: cs14-pins { + pins = "GPIO_44"; + function = "si"; + }; +}; + +&spi0 { + pinctrl-0 = <&si2_pins>; + pinctrl-names = "default"; + spi@e { + compatible = "spi-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + reg = <14>; /* CS14 */ + spi-flash@6 { + compatible = "spi-nand"; + pinctrl-0 = <&cs14_pins>; + pinctrl-names = "default"; + reg = <0x6>; /* SPI2 */ + spi-max-frequency = <42000000>; + rx-sample-delay-ns = <7>; /* Tune for speed */ + }; + }; +}; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts index 91ee5b6cfc37..6b2da7c7520c 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts @@ -16,6 +16,59 @@ }; }; +&gpio { + emmc_pins: emmc-pins { + /* NB: No "GPIO_35", "GPIO_36", "GPIO_37" + * (N/A: CARD_nDETECT, CARD_WP, CARD_LED) + */ + pins = "GPIO_34", "GPIO_38", "GPIO_39", + "GPIO_40", "GPIO_41", "GPIO_42", + "GPIO_43", "GPIO_44", "GPIO_45", + "GPIO_46", "GPIO_47"; + drive-strength = <3>; + function = "emmc"; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + non-removable; + pinctrl-0 = <&emmc_pins>; + max-frequency = <8000000>; + microchip,clock-delay = <10>; +}; + +&spi0 { + status = "okay"; + spi@0 { + compatible = "spi-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; /* CS0 */ + spi-flash@9 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <8000000>; + reg = <0x9>; /* SPI */ + }; + }; + spi@1 { + compatible = "spi-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; /* CS1 */ + spi-flash@9 { + compatible = "spi-nand"; + pinctrl-0 = <&cs1_pins>; + pinctrl-names = "default"; + spi-max-frequency = <8000000>; + reg = <0x9>; /* SPI */ + }; + }; +}; + &i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts index feee4e99ff57..45ca1af7e850 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "sparx5_pcb134_board.dtsi" +#include "sparx5_nand.dtsi" / { model = "Sparx5 PCB134 Reference Board (NAND)"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 18a535a04368..f37b478d6534 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -38,6 +38,38 @@ }; }; +&spi0 { + status = "okay"; + spi@0 { + compatible = "spi-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; /* CS0 */ + spi-flash@9 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <8000000>; + reg = <0x9>; /* SPI */ + }; + }; +}; + +&spi0 { + status = "okay"; + spi@0 { + compatible = "spi-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; /* CS0 */ + spi-flash@9 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <8000000>; + reg = <0x9>; /* SPI */ + }; + }; +}; + &gpio { i2cmux_pins_i: i2cmux-pins-i { pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts index 10081a66961b..bbb9852c1f15 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts @@ -15,3 +15,26 @@ reg = <0x00000000 0x00000000 0x10000000>; }; }; + +&gpio { + emmc_pins: emmc-pins { + /* NB: No "GPIO_35", "GPIO_36", "GPIO_37" + * (N/A: CARD_nDETECT, CARD_WP, CARD_LED) + */ + pins = "GPIO_34", "GPIO_38", "GPIO_39", + "GPIO_40", "GPIO_41", "GPIO_42", + "GPIO_43", "GPIO_44", "GPIO_45", + "GPIO_46", "GPIO_47"; + drive-strength = <3>; + function = "emmc"; + }; +}; + +&sdhci0 { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + non-removable; + max-frequency = <52000000>; + bus-width = <8>; + microchip,clock-delay = <10>; +}; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts index 20e409a9be19..647cdb38b113 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "sparx5_pcb135_board.dtsi" +#include "sparx5_nand.dtsi" / { model = "Sparx5 PCB135 Reference Board (NAND)"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index d71f11a10b3d..b02b8c8ce44d 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -51,6 +51,38 @@ }; }; +&spi0 { + status = "okay"; + spi@0 { + compatible = "spi-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; /* CS0 */ + spi-flash@9 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <8000000>; + reg = <0x9>; /* SPI */ + }; + }; +}; + +&spi0 { + status = "okay"; + spi@0 { + compatible = "spi-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; /* CS0 */ + spi-flash@9 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <8000000>; + reg = <0x9>; /* SPI */ + }; + }; +}; + &axi { i2c0_imux: i2c0-imux@0 { compatible = "i2c-mux-pinctrl"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts index 741f0e12260e..f82266fe2ad4 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts @@ -15,3 +15,26 @@ reg = <0x00000000 0x00000000 0x10000000>; }; }; + +&gpio { + emmc_pins: emmc-pins { + /* NB: No "GPIO_35", "GPIO_36", "GPIO_37" + * (N/A: CARD_nDETECT, CARD_WP, CARD_LED) + */ + pins = "GPIO_34", "GPIO_38", "GPIO_39", + "GPIO_40", "GPIO_41", "GPIO_42", + "GPIO_43", "GPIO_44", "GPIO_45", + "GPIO_46", "GPIO_47"; + drive-strength = <3>; + function = "emmc"; + }; +}; + +&sdhci0 { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + non-removable; + max-frequency = <52000000>; + bus-width = <8>; + microchip,clock-delay = <10>; +}; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 2273fc5db19c..9296d12d11e9 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -9,3 +9,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 802b8c52489a..381a84912ba8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -222,6 +222,7 @@ compatible = "atmel,24c02"; reg = <0x57>; + label = "system"; vcc-supply = <&vdd_1v8>; address-width = <8>; pagesize = <8>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 53d92fdd7f06..fd9177447711 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -173,6 +173,7 @@ compatible = "atmel,24c02"; reg = <0x50>; + label = "module"; vcc-supply = <&vdd_1v8>; address-width = <8>; pagesize = <8>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 8eb61dd9921e..0c46ab7bbbf3 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -85,7 +85,7 @@ ranges = <0x02900000 0x0 0x02900000 0x200000>; status = "disabled"; - dma-controller@2930000 { + adma: dma-controller@2930000 { compatible = "nvidia,tegra186-adma"; reg = <0x02930000 0x20000>; interrupt-parent = <&agic>; @@ -140,6 +140,221 @@ clock-names = "clk"; status = "disabled"; }; + + tegra_ahub: ahub@2900800 { + compatible = "nvidia,tegra186-ahub"; + reg = <0x02900800 0x800>; + clocks = <&bpmp TEGRA186_CLK_AHUB>; + clock-names = "ahub"; + assigned-clocks = <&bpmp TEGRA186_CLK_AHUB>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900800 0x02900800 0x11800>; + status = "disabled"; + + tegra_admaif: admaif@290f000 { + compatible = "nvidia,tegra186-admaif"; + reg = <0x0290f000 0x1000>; + dmas = <&adma 1>, <&adma 1>, + <&adma 2>, <&adma 2>, + <&adma 3>, <&adma 3>, + <&adma 4>, <&adma 4>, + <&adma 5>, <&adma 5>, + <&adma 6>, <&adma 6>, + <&adma 7>, <&adma 7>, + <&adma 8>, <&adma 8>, + <&adma 9>, <&adma 9>, + <&adma 10>, <&adma 10>, + <&adma 11>, <&adma 11>, + <&adma 12>, <&adma 12>, + <&adma 13>, <&adma 13>, + <&adma 14>, <&adma 14>, + <&adma 15>, <&adma 15>, + <&adma 16>, <&adma 16>, + <&adma 17>, <&adma 17>, + <&adma 18>, <&adma 18>, + <&adma 19>, <&adma 19>, + <&adma 20>, <&adma 20>; + dma-names = "rx1", "tx1", + "rx2", "tx2", + "rx3", "tx3", + "rx4", "tx4", + "rx5", "tx5", + "rx6", "tx6", + "rx7", "tx7", + "rx8", "tx8", + "rx9", "tx9", + "rx10", "tx10", + "rx11", "tx11", + "rx12", "tx12", + "rx13", "tx13", + "rx14", "tx14", + "rx15", "tx15", + "rx16", "tx16", + "rx17", "tx17", + "rx18", "tx18", + "rx19", "tx19", + "rx20", "tx20"; + status = "disabled"; + }; + + tegra_i2s1: i2s@2901000 { + compatible = "nvidia,tegra186-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901000 0x100>; + clocks = <&bpmp TEGRA186_CLK_I2S1>, + <&bpmp TEGRA186_CLK_I2S1_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA186_CLK_I2S1>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S1"; + status = "disabled"; + }; + + tegra_i2s2: i2s@2901100 { + compatible = "nvidia,tegra186-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901100 0x100>; + clocks = <&bpmp TEGRA186_CLK_I2S2>, + <&bpmp TEGRA186_CLK_I2S2_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA186_CLK_I2S2>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S2"; + status = "disabled"; + }; + + tegra_i2s3: i2s@2901200 { + compatible = "nvidia,tegra186-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901200 0x100>; + clocks = <&bpmp TEGRA186_CLK_I2S3>, + <&bpmp TEGRA186_CLK_I2S3_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA186_CLK_I2S3>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S3"; + status = "disabled"; + }; + + tegra_i2s4: i2s@2901300 { + compatible = "nvidia,tegra186-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901300 0x100>; + clocks = <&bpmp TEGRA186_CLK_I2S4>, + <&bpmp TEGRA186_CLK_I2S4_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA186_CLK_I2S4>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S4"; + status = "disabled"; + }; + + tegra_i2s5: i2s@2901400 { + compatible = "nvidia,tegra186-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901400 0x100>; + clocks = <&bpmp TEGRA186_CLK_I2S5>, + <&bpmp TEGRA186_CLK_I2S5_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA186_CLK_I2S5>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S5"; + status = "disabled"; + }; + + tegra_i2s6: i2s@2901500 { + compatible = "nvidia,tegra186-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901500 0x100>; + clocks = <&bpmp TEGRA186_CLK_I2S6>, + <&bpmp TEGRA186_CLK_I2S6_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA186_CLK_I2S6>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S6"; + status = "disabled"; + }; + + tegra_dmic1: dmic@2904000 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x2904000 0x100>; + clocks = <&bpmp TEGRA186_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC1"; + status = "disabled"; + }; + + tegra_dmic2: dmic@2904100 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x2904100 0x100>; + clocks = <&bpmp TEGRA186_CLK_DMIC2>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC2"; + status = "disabled"; + }; + + tegra_dmic3: dmic@2904200 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x2904200 0x100>; + clocks = <&bpmp TEGRA186_CLK_DMIC3>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC3"; + status = "disabled"; + }; + + tegra_dmic4: dmic@2904300 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x2904300 0x100>; + clocks = <&bpmp TEGRA186_CLK_DMIC4>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC4"; + status = "disabled"; + }; + + tegra_dspk1: dspk@2905000 { + compatible = "nvidia,tegra186-dspk"; + reg = <0x2905000 0x100>; + clocks = <&bpmp TEGRA186_CLK_DSPK1>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK1"; + status = "disabled"; + }; + + tegra_dspk2: dspk@2905100 { + compatible = "nvidia,tegra186-dspk"; + reg = <0x2905100 0x100>; + clocks = <&bpmp TEGRA186_CLK_DSPK2>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK2"; + status = "disabled"; + }; + }; }; mc: memory-controller@2c00000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 4c005b811233..d71b7a1140fe 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -57,6 +57,22 @@ status = "okay"; }; + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + label = "module"; + vcc-supply = <&vdd_1v8ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + /* SDMMC1 (SD/MMC) */ mmc@3400000 { cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 90b6ea5467fa..54d057beec59 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -23,6 +23,20 @@ }; }; + i2c@3160000 { + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + + label = "system"; + vcc-supply = <&vdd_1v8ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + ddc: i2c@31c0000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts index c1c589805d6b..7f97b34216a0 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts @@ -27,6 +27,20 @@ status = "okay"; }; + i2c@3160000 { + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + label = "system"; + vcc-supply = <&vdd_1v8>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + hda@3510000 { nvidia,model = "jetson-xavier-nx-hda"; status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi index 10cb836aea7e..a2893be80507 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi @@ -58,6 +58,22 @@ status = "okay"; }; + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + label = "module"; + vcc-supply = <&vdd_1v8ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + /* SDMMC1 (SD/MMC) */ mmc@3400000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index ca5cb6aef5ee..e9c90f0f44ff 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -83,7 +83,7 @@ ranges = <0x02900000 0x02900000 0x200000>; status = "disabled"; - dma-controller@2930000 { + adma: dma-controller@2930000 { compatible = "nvidia,tegra194-adma", "nvidia,tegra186-adma"; reg = <0x02930000 0x20000>; @@ -140,6 +140,229 @@ clock-names = "clk"; status = "disabled"; }; + + tegra_ahub: ahub@2900800 { + compatible = "nvidia,tegra194-ahub", + "nvidia,tegra186-ahub"; + reg = <0x02900800 0x800>; + clocks = <&bpmp TEGRA194_CLK_AHUB>; + clock-names = "ahub"; + assigned-clocks = <&bpmp TEGRA194_CLK_AHUB>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900800 0x02900800 0x11800>; + status = "disabled"; + + tegra_admaif: admaif@290f000 { + compatible = "nvidia,tegra194-admaif", + "nvidia,tegra186-admaif"; + reg = <0x0290f000 0x1000>; + dmas = <&adma 1>, <&adma 1>, + <&adma 2>, <&adma 2>, + <&adma 3>, <&adma 3>, + <&adma 4>, <&adma 4>, + <&adma 5>, <&adma 5>, + <&adma 6>, <&adma 6>, + <&adma 7>, <&adma 7>, + <&adma 8>, <&adma 8>, + <&adma 9>, <&adma 9>, + <&adma 10>, <&adma 10>, + <&adma 11>, <&adma 11>, + <&adma 12>, <&adma 12>, + <&adma 13>, <&adma 13>, + <&adma 14>, <&adma 14>, + <&adma 15>, <&adma 15>, + <&adma 16>, <&adma 16>, + <&adma 17>, <&adma 17>, + <&adma 18>, <&adma 18>, + <&adma 19>, <&adma 19>, + <&adma 20>, <&adma 20>; + dma-names = "rx1", "tx1", + "rx2", "tx2", + "rx3", "tx3", + "rx4", "tx4", + "rx5", "tx5", + "rx6", "tx6", + "rx7", "tx7", + "rx8", "tx8", + "rx9", "tx9", + "rx10", "tx10", + "rx11", "tx11", + "rx12", "tx12", + "rx13", "tx13", + "rx14", "tx14", + "rx15", "tx15", + "rx16", "tx16", + "rx17", "tx17", + "rx18", "tx18", + "rx19", "tx19", + "rx20", "tx20"; + status = "disabled"; + }; + + tegra_i2s1: i2s@2901000 { + compatible = "nvidia,tegra194-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901000 0x100>; + clocks = <&bpmp TEGRA194_CLK_I2S1>, + <&bpmp TEGRA194_CLK_I2S1_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA194_CLK_I2S1>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S1"; + status = "disabled"; + }; + + tegra_i2s2: i2s@2901100 { + compatible = "nvidia,tegra194-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901100 0x100>; + clocks = <&bpmp TEGRA194_CLK_I2S2>, + <&bpmp TEGRA194_CLK_I2S2_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA194_CLK_I2S2>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S2"; + status = "disabled"; + }; + + tegra_i2s3: i2s@2901200 { + compatible = "nvidia,tegra194-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901200 0x100>; + clocks = <&bpmp TEGRA194_CLK_I2S3>, + <&bpmp TEGRA194_CLK_I2S3_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA194_CLK_I2S3>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S3"; + status = "disabled"; + }; + + tegra_i2s4: i2s@2901300 { + compatible = "nvidia,tegra194-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901300 0x100>; + clocks = <&bpmp TEGRA194_CLK_I2S4>, + <&bpmp TEGRA194_CLK_I2S4_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA194_CLK_I2S4>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S4"; + status = "disabled"; + }; + + tegra_i2s5: i2s@2901400 { + compatible = "nvidia,tegra194-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901400 0x100>; + clocks = <&bpmp TEGRA194_CLK_I2S5>, + <&bpmp TEGRA194_CLK_I2S5_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA194_CLK_I2S5>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S5"; + status = "disabled"; + }; + + tegra_i2s6: i2s@2901500 { + compatible = "nvidia,tegra194-i2s", + "nvidia,tegra210-i2s"; + reg = <0x2901500 0x100>; + clocks = <&bpmp TEGRA194_CLK_I2S6>, + <&bpmp TEGRA194_CLK_I2S6_SYNC_INPUT>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA194_CLK_I2S6>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S6"; + status = "disabled"; + }; + + tegra_dmic1: dmic@2904000 { + compatible = "nvidia,tegra194-dmic", + "nvidia,tegra210-dmic"; + reg = <0x2904000 0x100>; + clocks = <&bpmp TEGRA194_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA194_CLK_DMIC1>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC1"; + status = "disabled"; + }; + + tegra_dmic2: dmic@2904100 { + compatible = "nvidia,tegra194-dmic", + "nvidia,tegra210-dmic"; + reg = <0x2904100 0x100>; + clocks = <&bpmp TEGRA194_CLK_DMIC2>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA194_CLK_DMIC2>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC2"; + status = "disabled"; + }; + + tegra_dmic3: dmic@2904200 { + compatible = "nvidia,tegra194-dmic", + "nvidia,tegra210-dmic"; + reg = <0x2904200 0x100>; + clocks = <&bpmp TEGRA194_CLK_DMIC3>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA194_CLK_DMIC3>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC3"; + status = "disabled"; + }; + + tegra_dmic4: dmic@2904300 { + compatible = "nvidia,tegra194-dmic", + "nvidia,tegra210-dmic"; + reg = <0x2904300 0x100>; + clocks = <&bpmp TEGRA194_CLK_DMIC4>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA194_CLK_DMIC4>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC4"; + status = "disabled"; + }; + + tegra_dspk1: dspk@2905000 { + compatible = "nvidia,tegra194-dspk", + "nvidia,tegra186-dspk"; + reg = <0x2905000 0x100>; + clocks = <&bpmp TEGRA194_CLK_DSPK1>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA194_CLK_DSPK1>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK1"; + status = "disabled"; + }; + + tegra_dspk2: dspk@2905100 { + compatible = "nvidia,tegra194-dspk", + "nvidia,tegra186-dspk"; + reg = <0x2905100 0x100>; + clocks = <&bpmp TEGRA194_CLK_DSPK2>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA194_CLK_DSPK2>; + assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK2"; + status = "disabled"; + }; + }; }; pinmux: pinmux@2430000 { @@ -329,6 +552,9 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C4>; reset-names = "i2c"; + pinctrl-0 = <&state_dpaux1_i2c>; + pinctrl-1 = <&state_dpaux1_off>; + pinctrl-names = "default", "idle"; status = "disabled"; }; @@ -343,10 +569,14 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C6>; reset-names = "i2c"; + pinctrl-0 = <&state_dpaux0_i2c>; + pinctrl-1 = <&state_dpaux0_off>; + pinctrl-names = "default", "idle"; status = "disabled"; }; - gen7_i2c: i2c@31c0000 { + /* shares pads with dpaux2 */ + dp_aux_ch2_i2c: i2c@31c0000 { compatible = "nvidia,tegra194-i2c"; reg = <0x031c0000 0x10000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; @@ -356,10 +586,14 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C7>; reset-names = "i2c"; + pinctrl-0 = <&state_dpaux2_i2c>; + pinctrl-1 = <&state_dpaux2_off>; + pinctrl-names = "default", "idle"; status = "disabled"; }; - gen9_i2c: i2c@31e0000 { + /* shares pads with dpaux3 */ + dp_aux_ch3_i2c: i2c@31e0000 { compatible = "nvidia,tegra194-i2c"; reg = <0x031e0000 0x10000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; @@ -369,6 +603,9 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C9>; reset-names = "i2c"; + pinctrl-0 = <&state_dpaux3_i2c>; + pinctrl-1 = <&state_dpaux3_off>; + pinctrl-names = "default", "idle"; status = "disabled"; }; @@ -1401,8 +1638,8 @@ gpu@17000000 { compatible = "nvidia,gv11b"; - reg = <0x17000000 0x10000000>, - <0x18000000 0x10000000>; + reg = <0x17000000 0x1000000>, + <0x18000000 0x1000000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "stall", "nonstall"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 6a4b50aaa25d..6077d572d828 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -273,6 +273,7 @@ compatible = "atmel,24c02"; reg = <0x50>; + label = "module"; vcc-supply = <&vdd_1v8>; address-width = <8>; pagesize = <8>; @@ -337,7 +338,7 @@ vdd_gpu: regulator@100 { compatible = "pwm-regulator"; - pwms = <&pwm 1 4880>; + pwms = <&pwm 1 8000>; regulator-name = "VDD_GPU"; regulator-min-microvolt = <710000>; regulator-max-microvolt = <1320000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 56adf287a82c..4c9c2a054642 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -86,6 +86,7 @@ compatible = "atmel,24c02"; reg = <0x57>; + label = "system"; vcc-supply = <&vdd_1v8>; address-width = <8>; pagesize = <8>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 2282ea1c6279..859241db4b4d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -144,6 +144,7 @@ compatible = "atmel,24c02"; reg = <0x50>; + label = "module"; vcc-supply = <&vdd_1v8>; address-width = <8>; pagesize = <8>; @@ -155,6 +156,7 @@ compatible = "atmel,24c02"; reg = <0x57>; + label = "system"; vcc-supply = <&vdd_1v8>; address-width = <8>; pagesize = <8>; @@ -541,6 +543,8 @@ mode = "peripheral"; usb-role-switch; + vbus-supply = <&vdd_5v0_usb>; + connector { compatible = "gpio-usb-b-connector", "usb-b-connector"; @@ -574,6 +578,7 @@ bus-width = <4>; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + disable-wp; vqmmc-supply = <&vddio_sdmmc>; vmmc-supply = <&vdd_3v3_sd>; @@ -621,6 +626,18 @@ pinctrl-1 = <&dvfs_pwm_inactive_state>; }; + aconnect@702c0000 { + status = "okay"; + + dma@702e2000 { + status = "okay"; + }; + + interrupt-controller@702f9000 { + status = "okay"; + }; + }; + clk32k_in: clock@0 { compatible = "fixed-clock"; clock-frequency = <32768>; @@ -818,7 +835,7 @@ vdd_gpu: regulator@6 { compatible = "pwm-regulator"; - pwms = <&pwm 1 4880>; + pwms = <&pwm 1 8000>; regulator-name = "VDD_GPU"; regulator-min-microvolt = <710000>; @@ -843,4 +860,14 @@ vin-supply = <&avdd_1v05_pll>; }; + + vdd_5v0_usb: regulator@8 { + compatible = "regulator-fixed"; + + regulator-name = "VDD_5V_USB"; + regulator-min-microvolt = <50000000>; + regulator-max-microvolt = <50000000>; + + vin-supply = <&vdd_5v0_sys>; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 8cca2166a446..d47c88950d38 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -194,6 +194,7 @@ iommus = <&mc TEGRA_SWGROUP_DC>; + nvidia,outputs = <&dsia &dsib &sor0 &sor1>; nvidia,head = <0>; }; @@ -208,10 +209,11 @@ iommus = <&mc TEGRA_SWGROUP_DCB>; + nvidia,outputs = <&dsia &dsib &sor0 &sor1>; nvidia,head = <1>; }; - dsi@54300000 { + dsia: dsi@54300000 { compatible = "nvidia,tegra210-dsi"; reg = <0x0 0x54300000 0x0 0x00040000>; clocks = <&tegra_car TEGRA210_CLK_DSIA>, @@ -248,7 +250,7 @@ status = "disabled"; }; - dsi@54400000 { + dsib: dsi@54400000 { compatible = "nvidia,tegra210-dsi"; reg = <0x0 0x54400000 0x0 0x00040000>; clocks = <&tegra_car TEGRA210_CLK_DSIB>, @@ -284,7 +286,7 @@ status = "disabled"; }; - sor@54540000 { + sor0: sor@54540000 { compatible = "nvidia,tegra210-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -304,7 +306,7 @@ status = "disabled"; }; - sor@54580000 { + sor1: sor@54580000 { compatible = "nvidia,tegra210-sor1"; reg = <0x0 0x54580000 0x0 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -1385,6 +1387,146 @@ clock-names = "clk"; status = "disabled"; }; + + tegra_ahub: ahub@702d0800 { + compatible = "nvidia,tegra210-ahub"; + reg = <0x702d0800 0x800>; + clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; + clock-names = "ahub"; + assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x702d0000 0x702d0000 0x0000e400>; + status = "disabled"; + + tegra_admaif: admaif@702d0000 { + compatible = "nvidia,tegra210-admaif"; + reg = <0x702d0000 0x800>; + dmas = <&adma 1>, <&adma 1>, + <&adma 2>, <&adma 2>, + <&adma 3>, <&adma 3>, + <&adma 4>, <&adma 4>, + <&adma 5>, <&adma 5>, + <&adma 6>, <&adma 6>, + <&adma 7>, <&adma 7>, + <&adma 8>, <&adma 8>, + <&adma 9>, <&adma 9>, + <&adma 10>, <&adma 10>; + dma-names = "rx1", "tx1", + "rx2", "tx2", + "rx3", "tx3", + "rx4", "tx4", + "rx5", "tx5", + "rx6", "tx6", + "rx7", "tx7", + "rx8", "tx8", + "rx9", "tx9", + "rx10", "tx10"; + status = "disabled"; + }; + + tegra_i2s1: i2s@702d1000 { + compatible = "nvidia,tegra210-i2s"; + reg = <0x702d1000 0x100>; + clocks = <&tegra_car TEGRA210_CLK_I2S0>, + <&tegra_car TEGRA210_CLK_I2S0_SYNC>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S1"; + status = "disabled"; + }; + + tegra_i2s2: i2s@702d1100 { + compatible = "nvidia,tegra210-i2s"; + reg = <0x702d1100 0x100>; + clocks = <&tegra_car TEGRA210_CLK_I2S1>, + <&tegra_car TEGRA210_CLK_I2S1_SYNC>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&tegra_car TEGRA210_CLK_I2S1>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S2"; + status = "disabled"; + }; + + tegra_i2s3: i2s@702d1200 { + compatible = "nvidia,tegra210-i2s"; + reg = <0x702d1200 0x100>; + clocks = <&tegra_car TEGRA210_CLK_I2S2>, + <&tegra_car TEGRA210_CLK_I2S2_SYNC>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&tegra_car TEGRA210_CLK_I2S2>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S3"; + status = "disabled"; + }; + + tegra_i2s4: i2s@702d1300 { + compatible = "nvidia,tegra210-i2s"; + reg = <0x702d1300 0x100>; + clocks = <&tegra_car TEGRA210_CLK_I2S3>, + <&tegra_car TEGRA210_CLK_I2S3_SYNC>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&tegra_car TEGRA210_CLK_I2S3>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S4"; + status = "disabled"; + }; + + tegra_i2s5: i2s@702d1400 { + compatible = "nvidia,tegra210-i2s"; + reg = <0x702d1400 0x100>; + clocks = <&tegra_car TEGRA210_CLK_I2S4>, + <&tegra_car TEGRA210_CLK_I2S4_SYNC>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&tegra_car TEGRA210_CLK_I2S4>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S5"; + status = "disabled"; + }; + + tegra_dmic1: dmic@702d4000 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x702d4000 0x100>; + clocks = <&tegra_car TEGRA210_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC1"; + status = "disabled"; + }; + + tegra_dmic2: dmic@702d4100 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x702d4100 0x100>; + clocks = <&tegra_car TEGRA210_CLK_DMIC2>; + clock-names = "dmic"; + assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC2>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC2"; + status = "disabled"; + }; + + tegra_dmic3: dmic@702d4200 { + compatible = "nvidia,tegra210-dmic"; + reg = <0x702d4200 0x100>; + clocks = <&tegra_car TEGRA210_CLK_DMIC3>; + clock-names = "dmic"; + assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC3>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC3"; + status = "disabled"; + }; + }; }; spi@70410000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts new file mode 100644 index 000000000000..f6e6a24829af --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra234.dtsi" + +/ { + model = "NVIDIA Tegra234 VDK"; + compatible = "nvidia,tegra234-vdk", "nvidia,tegra234"; + + aliases { + sdhci3 = "/cbb@0/sdhci@3460000"; + serial0 = &uarta; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x03100000"; + stdout-path = "serial0:115200n8"; + }; + + cbb@0 { + serial@3100000 { + status = "okay"; + }; + + sdhci@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + only-1-8-v; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi new file mode 100644 index 000000000000..f0efb3a62804 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/clock/tegra234-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/tegra186-hsp.h> +#include <dt-bindings/reset/tegra234-reset.h> + +/ { + compatible = "nvidia,tegra234"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + bus@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x0 0x0 0x40000000>; + + misc@100000 { + compatible = "nvidia,tegra234-misc"; + reg = <0x00100000 0xf000>, + <0x0010f000 0x1000>; + status = "okay"; + }; + + uarta: serial@3100000 { + compatible = "nvidia,tegra234-uart", "nvidia,tegra20-uart"; + reg = <0x03100000 0x10000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA234_CLK_UARTA>; + clock-names = "serial"; + resets = <&bpmp TEGRA234_RESET_UARTA>; + reset-names = "serial"; + status = "disabled"; + }; + + mmc@3460000 { + compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci"; + reg = <0x03460000 0x20000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA234_CLK_SDMMC4>; + clock-names = "sdhci"; + resets = <&bpmp TEGRA234_RESET_SDMMC4>; + reset-names = "sdhci"; + dma-coherent; + status = "disabled"; + }; + + fuse@3810000 { + compatible = "nvidia,tegra234-efuse"; + reg = <0x03810000 0x10000>; + clocks = <&bpmp TEGRA234_CLK_FUSE>; + clock-names = "fuse"; + }; + + hsp_top0: hsp@3c00000 { + compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp"; + reg = <0x03c00000 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell", "shared0", "shared1", "shared2", + "shared3", "shared4", "shared5", "shared6", + "shared7"; + #mbox-cells = <2>; + }; + + hsp_aon: hsp@c150000 { + compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp"; + reg = <0x0c150000 0x90000>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + /* + * Shared interrupt 0 is routed only to AON/SPE, so + * we only have 4 shared interrupts for the CCPLEX. + */ + interrupt-names = "shared1", "shared2", "shared3", "shared4"; + #mbox-cells = <2>; + }; + + rtc@c2a0000 { + compatible = "nvidia,tegra234-rtc", "nvidia,tegra20-rtc"; + reg = <0x0c2a0000 0x10000>; + interrupt-parent = <&pmc>; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pmc: pmc@c360000 { + compatible = "nvidia,tegra234-pmc"; + reg = <0x0c360000 0x10000>, + <0x0c370000 0x10000>, + <0x0c380000 0x10000>, + <0x0c390000 0x10000>, + <0x0c3a0000 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch", "misc"; + + #interrupt-cells = <2>; + interrupt-controller; + }; + + gic: interrupt-controller@f400000 { + compatible = "arm,gic-v3"; + reg = <0x0f400000 0x010000>, /* GICD */ + <0x0f440000 0x200000>; /* GICR */ + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + + #redistributor-regions = <1>; + #interrupt-cells = <3>; + interrupt-controller; + }; + }; + + sysram@40000000 { + compatible = "nvidia,tegra234-sysram", "mmio-sram"; + reg = <0x0 0x40000000 0x0 0x50000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40000000 0x50000>; + + cpu_bpmp_tx: shmem@4e000 { + reg = <0x4e000 0x1000>; + label = "cpu-bpmp-tx"; + pool; + }; + + cpu_bpmp_rx: shmem@4f000 { + reg = <0x4f000 0x1000>; + label = "cpu-bpmp-rx"; + pool; + }; + }; + + bpmp: bpmp { + compatible = "nvidia,tegra234-bpmp", "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB + TEGRA_HSP_DB_MASTER_BPMP>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + bpmp_i2c: i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0x000>; + + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + status = "okay"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + always-on; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d8f1466e6758..fb4631f898fd 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,11 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb -dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb @@ -18,7 +18,16 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb @@ -30,8 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb -dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb -dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 194343510dcb..3c7f97539390 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -3,38 +3,13 @@ * Copyright (c) 2015, The Linux Foundation. All rights reserved. */ -#include "msm8916.dtsi" -#include "pm8916.dtsi" +#include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> #include <dt-bindings/sound/apq8016-lpass.h> -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * HSEC = High Speed External Connector - * - * Line names are taken from the schematic "DragonBoard410c" - * dated monday, august 31, 2015. Page 5 in particular. - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - / { aliases { serial0 = &blsp1_uart2; @@ -76,7 +51,7 @@ }; reserved-memory { - ramoops@bff00000{ + ramoops@bff00000 { compatible = "ramoops"; reg = <0x0 0xbff00000 0x0 0x100000>; @@ -86,509 +61,190 @@ }; }; - soc { - pinctrl@1000000 { - gpio-line-names = - "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ - "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ - "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ - "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ - "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ - "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ - "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ - "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ - "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ - "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ - "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ - "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ - "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ - "[I2C3_SDA]", /* HSEC pin 38 */ - "[I2C3_SCL]", /* HSEC pin 36 */ - "[SPI0_MOSI]", /* LSEC pin 14 */ - "[SPI0_MISO]", /* LSEC pin 10 */ - "[SPI0_CS_N]", /* LSEC pin 12 */ - "[SPI0_CLK]", /* LSEC pin 8 */ - "HDMI_HPD_N", /* GPIO 20 */ - "USR_LED_1_CTRL", - "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ - "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ - "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ - "[CSI0_MCLK]", /* HSEC pin 15 */ - "[CSI1_MCLK]", /* HSEC pin 17 */ - "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ - "[I2C2_SDA]", /* HSEC pin 34 */ - "[I2C2_SCL]", /* HSEC pin 32 */ - "DSI2HDMI_INT_N", - "DSI_SW_SEL_APQ", - "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ - "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ - "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ - "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ - "FORCED_USB_BOOT", - "SD_CARD_DET_N", - "[WCSS_BT_SSBI]", - "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ - "[WCSS_WLAN_DATA_1]", - "[WCSS_WLAN_DATA_0]", - "[WCSS_WLAN_SET]", - "[WCSS_WLAN_CLK]", - "[WCSS_FM_SSBI]", - "[WCSS_FM_SDI]", - "[WCSS_BT_DAT_CTL]", - "[WCSS_BT_DAT_STB]", - "NC", - "NC", /* GPIO 50 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 60 */ - "NC", - "NC", - "[CDC_PDM0_CLK]", - "[CDC_PDM0_SYNC]", - "[CDC_PDM0_TX0]", - "[CDC_PDM0_RX0]", - "[CDC_PDM0_RX1]", - "[CDC_PDM0_RX2]", - "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ - "NC", /* GPIO 70 */ - "NC", - "NC", - "NC", - "NC", /* GPIO 74 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "BOOT_CONFIG_0", /* GPIO 80 */ - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_3", - "NC", - "NC", - "BOOT_CONFIG_5", - "NC", - "NC", - "NC", - "NC", /* GPIO 90 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 100 */ - "NC", - "NC", - "NC", - "SSBI_GPS", - "NC", - "NC", - "KEY_VOLP_N", - "NC", - "NC", - "[LS_EXP_MI2S_WS]", /* GPIO 110 */ - "NC", - "NC", - "[LS_EXP_MI2S_SCK]", - "[LS_EXP_MI2S_DATA0]", - "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ - "NC", - "[DSI2HDMI_MI2S_WS]", - "[DSI2HDMI_MI2S_SCK]", - "[DSI2HDMI_MI2S_DATA0]", - "USR_LED_2_CTRL", /* GPIO 120 */ - "SB_HS_ID"; - }; - - dma@7884000 { - status = "okay"; - }; - - serial@78af000 { - label = "LS-UART0"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; - }; - - serial@78b0000 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - - i2c@78b6000 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; - }; - - i2c@78b8000 { - /* On High speed expansion */ - label = "HS-I2C2"; - status = "okay"; - - adv_bridge: bridge@39 { - status = "okay"; - - compatible = "adi,adv7533"; - reg = <0x39>; - - interrupt-parent = <&msmgpio>; - interrupts = <31 2>; - - adi,dsi-lanes = <4>; - clocks = <&rpmcc RPM_SMD_BB_CLK2>; - clock-names = "cec"; - - pd-gpios = <&msmgpio 32 0>; - - avdd-supply = <&pm8916_l6>; - v1p2-supply = <&pm8916_l6>; - v3p3-supply = <&pm8916_l17>; - - pinctrl-names = "default","sleep"; - pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; - pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; - #sound-dai-cells = <1>; + usb2513 { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; - ports { - #address-cells = <1>; - #size-cells = <0>; + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; - port@0 { - reg = <0>; - adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; - port@1 { - reg = <1>; - adv7533_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; }; }; + }; - i2c@78ba000 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; - }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; - spi@78b7000 { - /* On High speed expansion */ - label = "HS-SPI1"; - status = "okay"; - }; + pinctrl-names = "default"; + pinctrl-0 = <&msm_key_volp_n_default>; - spi@78b9000 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; }; + }; - leds { - pinctrl-names = "default"; - pinctrl-0 = <&msmgpio_leds>, - <&pm8916_gpios_leds>, - <&pm8916_mpps_leds>; - - compatible = "gpio-leds"; - - led@1 { - label = "apq8016-sbc:green:user1"; - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led@2 { - label = "apq8016-sbc:green:user2"; - gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led@3 { - label = "apq8016-sbc:green:user3"; - gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - led@4 { - label = "apq8016-sbc:green:user4"; - gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - panic-indicator; - default-state = "off"; - }; + leds { + pinctrl-names = "default"; + pinctrl-0 = <&msmgpio_leds>, + <&pm8916_gpios_leds>, + <&pm8916_mpps_leds>; - led@5 { - label = "apq8016-sbc:yellow:wlan"; - gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; + compatible = "gpio-leds"; - led@6 { - label = "apq8016-sbc:blue:bt"; - gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; + led@1 { + label = "apq8016-sbc:green:user1"; + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; }; - sdhci@7824000 { - vmmc-supply = <&pm8916_l8>; - vqmmc-supply = <&pm8916_l5>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - status = "okay"; + led@2 { + label = "apq8016-sbc:green:user2"; + gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; }; - sdhci@7864000 { - vmmc-supply = <&pm8916_l11>; - vqmmc-supply = <&pm8916_l12>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + led@3 { + label = "apq8016-sbc:green:user3"; + gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; - cd-gpios = <&msmgpio 38 0x1>; - status = "okay"; + led@4 { + label = "apq8016-sbc:green:user4"; + gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + panic-indicator; + default-state = "off"; }; - usb@78d9000 { - extcon = <&usb_id>, <&usb_id>; - status = "okay"; - adp-disable; - hnp-disable; - srp-disable; - dr_mode = "otg"; - pinctrl-names = "default", "device"; - pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; - pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; - ulpi { - phy { - v1p8-supply = <&pm8916_l7>; - v3p3-supply = <&pm8916_l13>; - extcon = <&usb_id>; - }; - }; + led@5 { + label = "apq8016-sbc:yellow:wlan"; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; }; - lpass@7708000 { - status = "okay"; + led@6 { + label = "apq8016-sbc:blue:bt"; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; }; + }; +}; - mdss@1a00000 { - status = "okay"; +&blsp_dma { + status = "okay"; +}; - mdp@1a01000 { - status = "okay"; - }; +&blsp_i2c2 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C0"; +}; - dsi@1a98000 { - status = "okay"; +&blsp_i2c4 { + /* On High speed expansion */ + status = "okay"; + label = "HS-I2C2"; - vdda-supply = <&pm8916_l2>; - vddio-supply = <&pm8916_l6>; + adv_bridge: bridge@39 { + status = "okay"; - ports { - port@1 { - endpoint { - remote-endpoint = <&adv7533_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; - }; + compatible = "adi,adv7533"; + reg = <0x39>; - dsi-phy@1a98300 { - status = "okay"; + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - vddio-supply = <&pm8916_l6>; - }; - }; + adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; - lpass_codec: codec{ - status = "okay"; - }; + pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; - /* - Internal Codec - playback - Primary MI2S - capture - Ter MI2S - - External Primary: - playback - secondary MI2S - capture - Quat MI2S - - External Secondary: - playback - Quat MI2S - capture - Quat MI2S - - */ - - sound: sound { - compatible = "qcom,apq8016-sbc-sndcard"; - reg = <0x07702000 0x4>, <0x07702004 0x4>; - reg-names = "mic-iomux", "spkr-iomux"; - - status = "okay"; - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; - pinctrl-names = "default", "sleep"; - qcom,model = "DB410c"; - qcom,audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; - - external-dai-link@0 { - link-name = "ADV7533"; - cpu { - sound-dai = <&lpass MI2S_QUATERNARY>; - }; - codec { - sound-dai = <&adv_bridge 0>; - }; - }; + avdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; - internal-codec-playback-dai-link@0 { - link-name = "WCD"; - cpu { - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + #sound-dai-cells = <1>; - internal-codec-capture-dai-link@0 { - link-name = "WCD-Capture"; - cpu { - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; - }; - spmi@200f000 { - pm8916@0 { - gpios@c000 { - gpio-line-names = - "USR_LED_3_CTRL", - "USR_LED_4_CTRL", - "USB_HUB_RESET_N_PM", - "USB_SW_SEL_PM"; - }; - mpps@a000 { - gpio-line-names = - "VDD_PX_BIAS", - "WLAN_LED_CTRL", - "BT_LED_CTRL", - "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; }; }; }; - - wcnss@a21b000 { - status = "okay"; - }; - - tpiu@820000 { status = "okay"; }; - funnel@821000 { status = "okay"; }; - replicator@824000 { status = "okay"; }; - etf@825000 { status = "okay"; }; - etr@826000 { status = "okay"; }; - funnel@841000 { status = "okay"; }; - debug@850000 { status = "okay"; }; - debug@852000 { status = "okay"; }; - debug@854000 { status = "okay"; }; - debug@856000 { status = "okay"; }; - etm@85c000 { status = "okay"; }; - etm@85d000 { status = "okay"; }; - etm@85e000 { status = "okay"; }; - etm@85f000 { status = "okay"; }; - cti@810000 { status = "okay"; }; - cti@811000 { status = "okay"; }; - cti@858000 { status = "okay"; }; - cti@859000 { status = "okay"; }; - cti@85a000 { status = "okay"; }; - cti@85b000 { status = "okay"; }; - }; - - usb2513 { - compatible = "smsc,usb3503"; - reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; - initial-mode = <1>; - }; - - usb_id: usb-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_id_default>; }; +}; - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; +&blsp_i2c6 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; +}; - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7533_out>; - }; - }; - }; +&blsp_spi3 { + /* On High speed expansion */ + status = "okay"; + label = "HS-SPI1"; +}; - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; +&blsp_spi5 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-SPI0"; +}; - pinctrl-names = "default"; - pinctrl-0 = <&msm_key_volp_n_default>; +&blsp1_uart1 { + status = "okay"; + label = "LS-UART0"; +}; - button@0 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; - }; - }; +&blsp1_uart2 { + status = "okay"; + label = "LS-UART1"; }; &camss { - status = "ok"; + status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; port@0 { reg = <0>; csiphy0_ep: endpoint { @@ -602,7 +258,7 @@ }; &cci { - status = "ok"; + status = "okay"; }; &cci_i2c0 { @@ -636,28 +292,126 @@ }; }; -&spmi_bus { - pm8916_0: pm8916@0 { - pon@800 { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + +&lpass { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + qcom,model = "DB410c"; + qcom,audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + external-dai-link@0 { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + internal-codec-playback-dai-link@0 { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link@0 { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; }; }; }; -&wcd_codec { +&usb { status = "okay"; + extcon = <&usb_id>, <&usb_id>; + + pinctrl-names = "default", "device"; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "mclk"; qcom,mbhc-vthreshold-low = <75 150 237 450 500>; qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; +/* Enable CoreSight */ +&cti0 { status = "okay"; }; +&cti1 { status = "okay"; }; +&cti12 { status = "okay"; }; +&cti13 { status = "okay"; }; +&cti14 { status = "okay"; }; +&cti15 { status = "okay"; }; +&debug0 { status = "okay"; }; +&debug1 { status = "okay"; }; +&debug2 { status = "okay"; }; +&debug3 { status = "okay"; }; +&etf { status = "okay"; }; +&etm0 { status = "okay"; }; +&etm1 { status = "okay"; }; +&etm2 { status = "okay"; }; +&etm3 { status = "okay"; }; +&etr { status = "okay"; }; +&funnel0 { status = "okay"; }; +&funnel1 { status = "okay"; }; +&replicator { status = "okay"; }; +&tpiu { status = "okay"; }; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -795,7 +549,155 @@ drive-strength = <16>; }; +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "DragonBoard410c" + * dated monday, august 31, 2015. Page 5 in particular. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + &msmgpio { + gpio-line-names = + "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ + "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ + "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ + "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ + "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ + "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ + "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ + "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ + "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ + "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ + "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ + "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ + "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ + "[I2C3_SDA]", /* HSEC pin 38 */ + "[I2C3_SCL]", /* HSEC pin 36 */ + "[SPI0_MOSI]", /* LSEC pin 14 */ + "[SPI0_MISO]", /* LSEC pin 10 */ + "[SPI0_CS_N]", /* LSEC pin 12 */ + "[SPI0_CLK]", /* LSEC pin 8 */ + "HDMI_HPD_N", /* GPIO 20 */ + "USR_LED_1_CTRL", + "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ + "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ + "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ + "[CSI0_MCLK]", /* HSEC pin 15 */ + "[CSI1_MCLK]", /* HSEC pin 17 */ + "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ + "[I2C2_SDA]", /* HSEC pin 34 */ + "[I2C2_SCL]", /* HSEC pin 32 */ + "DSI2HDMI_INT_N", + "DSI_SW_SEL_APQ", + "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ + "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ + "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ + "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ + "FORCED_USB_BOOT", + "SD_CARD_DET_N", + "[WCSS_BT_SSBI]", + "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ + "[WCSS_WLAN_DATA_1]", + "[WCSS_WLAN_DATA_0]", + "[WCSS_WLAN_SET]", + "[WCSS_WLAN_CLK]", + "[WCSS_FM_SSBI]", + "[WCSS_FM_SDI]", + "[WCSS_BT_DAT_CTL]", + "[WCSS_BT_DAT_STB]", + "NC", + "NC", /* GPIO 50 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 60 */ + "NC", + "NC", + "[CDC_PDM0_CLK]", + "[CDC_PDM0_SYNC]", + "[CDC_PDM0_TX0]", + "[CDC_PDM0_RX0]", + "[CDC_PDM0_RX1]", + "[CDC_PDM0_RX2]", + "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ + "NC", /* GPIO 70 */ + "NC", + "NC", + "NC", + "NC", /* GPIO 74 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "BOOT_CONFIG_0", /* GPIO 80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "BOOT_CONFIG_5", + "NC", + "NC", + "NC", + "NC", /* GPIO 90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 100 */ + "NC", + "NC", + "NC", + "SSBI_GPS", + "NC", + "NC", + "KEY_VOLP_N", + "NC", + "NC", + "[LS_EXP_MI2S_WS]", /* GPIO 110 */ + "NC", + "NC", + "[LS_EXP_MI2S_SCK]", + "[LS_EXP_MI2S_DATA0]", + "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ + "NC", + "[DSI2HDMI_MI2S_WS]", + "[DSI2HDMI_MI2S_SCK]", + "[DSI2HDMI_MI2S_DATA0]", + "USR_LED_2_CTRL", /* GPIO 120 */ + "SB_HS_ID"; + msmgpio_leds: msmgpio-leds { pins = "gpio21", "gpio120"; function = "gpio"; @@ -855,6 +757,12 @@ }; &pm8916_gpios { + gpio-line-names = + "USR_LED_3_CTRL", + "USR_LED_4_CTRL", + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM"; + usb_hub_reset_pm: usb-hub-reset-pm { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; @@ -897,6 +805,12 @@ }; &pm8916_mpps { + gpio-line-names = + "VDD_PX_BIAS", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ + pinctrl-names = "default"; pinctrl-0 = <&ls_exp_gpio_f>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index b31117a93995..e8eaa958c199 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -26,18 +26,18 @@ &blsp1_uart3 { pinctrl-0 = <&serial_3_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; &i2c_1 { pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; &spi_0 { cs-select = <0>; - status = "ok"; + status = "okay"; m25p80@0 { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 1aa8d8579463..a94dac76bf3f 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq6018.h> #include <dt-bindings/reset/qcom,gcc-ipq6018.h> +#include <dt-bindings/clock/qcom,apss-ipq.h> / { #address-cells = <2>; @@ -38,6 +39,10 @@ reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq6018_s2>; }; CPU1: cpu@1 { @@ -46,6 +51,10 @@ enable-method = "psci"; reg = <0x1>; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq6018_s2>; }; CPU2: cpu@2 { @@ -54,6 +63,10 @@ enable-method = "psci"; reg = <0x2>; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq6018_s2>; }; CPU3: cpu@3 { @@ -62,6 +75,10 @@ enable-method = "psci"; reg = <0x3>; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + cpu-supply = <&ipq6018_s2>; }; L2_0: l2-cache { @@ -70,6 +87,42 @@ }; }; + cpu_opp_table: cpu_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-864000000 { + opp-hz = /bits/ 64 <864000000>; + opp-microvolt = <725000>; + clock-latency-ns = <200000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <787500>; + clock-latency-ns = <200000>; + }; + opp-1320000000 { + opp-hz = /bits/ 64 <1320000000>; + opp-microvolt = <862500>; + clock-latency-ns = <200000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <200000>; + }; + }; + firmware { scm { compatible = "qcom,scm"; @@ -98,6 +151,11 @@ #size-cells = <2>; ranges; + rpm_msg_ram: memory@0x60000 { + reg = <0x0 0x60000 0x0 0x6000>; + no-map; + }; + tz: tz@48500000 { reg = <0x0 0x48500000 0x0 0x00200000>; no-map; @@ -294,12 +352,22 @@ }; apcs_glb: mailbox@b111000 { - compatible = "qcom,ipq8074-apcs-apps-global"; - reg = <0x0b111000 0xc>; - + compatible = "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo>; + clock-names = "pll", "xo"; #mbox-cells = <1>; }; + a53pll: clock@b116000 { + compatible = "qcom,ipq6018-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo>; + clock-names = "xo"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -440,4 +508,26 @@ #interrupt-cells = <2>; }; }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: glink-channel { + compatible = "qcom,rpm-ipq6018"; + qcom,glink-channels = "rpm_requests"; + + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq6018_s2: s2 { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1062500>; + regulator-always-on; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index f4a76162ab5f..e8c37a1693d3 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -27,11 +27,11 @@ }; &blsp1_i2c2 { - status = "ok"; + status = "okay"; }; &blsp1_spi1 { - status = "ok"; + status = "okay"; m25p80@0 { #address-cells = <1>; @@ -43,37 +43,37 @@ }; &blsp1_uart3 { - status = "ok"; + status = "okay"; }; &blsp1_uart5 { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; + status = "okay"; perst-gpio = <&tlmm 61 0x1>; }; &pcie1 { - status = "ok"; + status = "okay"; perst-gpio = <&tlmm 58 0x1>; }; &pcie_phy0 { - status = "ok"; + status = "okay"; }; &pcie_phy1 { - status = "ok"; + status = "okay"; }; &qpic_bam { - status = "ok"; + status = "okay"; }; &qpic_nand { - status = "ok"; + status = "okay"; nand@0 { reg = <0>; @@ -84,29 +84,29 @@ }; &sdhc_1 { - status = "ok"; + status = "okay"; }; &qusb_phy_0 { - status = "ok"; + status = "okay"; }; &qusb_phy_1 { - status = "ok"; + status = "okay"; }; &ssphy_0 { - status = "ok"; + status = "okay"; }; &ssphy_1 { - status = "ok"; + status = "okay"; }; &usb_0 { - status = "ok"; + status = "okay"; }; &usb_1 { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 96a5ec89b5f0..829e37ac82f6 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -67,7 +67,7 @@ }; pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; @@ -498,6 +498,14 @@ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + watchdog: watchdog@b017000 { + compatible = "qcom,kpss-wdt"; + reg = <0xb017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 9f2c8e94fd26..b9d3c5d98dd0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -2,8 +2,7 @@ /dts-v1/; -#include "msm8916.dtsi" -#include "pm8916.dtsi" +#include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -29,61 +28,6 @@ }; }; - soc { - sdhci@7824000 { - status = "okay"; - - vmmc-supply = <&pm8916_l8>; - vqmmc-supply = <&pm8916_l5>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - }; - - sdhci@7864000 { - status = "okay"; - - vmmc-supply = <&pm8916_l11>; - vqmmc-supply = <&pm8916_l12>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - - non-removable; - }; - - serial@78b0000 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - - usb@78d9000 { - status = "okay"; - dr_mode = "peripheral"; - extcon = <&usb_vbus>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy { - extcon = <&usb_vbus>; - v1p8-supply = <&pm8916_l7>; - v3p3-supply = <&pm8916_l13>; - }; - }; - }; - - wcnss@a21b000 { - status = "okay"; - }; - }; - // FIXME: Use extcon device provided by charger driver when available usb_vbus: usb-vbus { compatible = "linux,extcon-usb-gpio"; @@ -108,17 +52,45 @@ }; }; -&spmi_bus { - pm8916@0 { - pon@800 { - volume-down { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; - }; +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&usb_vbus>; +}; + +&usb_hs_phy { + extcon = <&usb_vbus>; }; &smd_rpm_regulators { diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi index 0c6e81fb8c01..1bd05046cdeb 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi @@ -3,8 +3,7 @@ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. */ -#include "msm8916.dtsi" -#include "pm8916.dtsi" +#include "msm8916-pm8916.dtsi" / { aliases { @@ -15,13 +14,8 @@ chosen { stdout-path = "serial0"; }; +}; - soc { - serial@78b0000 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - }; +&blsp1_uart2 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi new file mode 100644 index 000000000000..cd626e7db599 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916.dtsi" +#include "pm8916.dtsi" + +&camss { + vdda-supply = <&pm8916_l2>; +}; + +&dsi0 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&dsi_phy0 { + vddio-supply = <&pm8916_l6>; +}; + +&mpss { + cx-supply = <&pm8916_s1>; + mx-supply = <&pm8916_l3>; + pll-supply = <&pm8916_l7>; +}; + +&pronto { + vddmx-supply = <&pm8916_l3>; + vddpx-supply = <&pm8916_l7>; + + iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; +}; + +&usb_hs_phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; +}; + +&rpm_requests { + smd_rpm_regulators: pm8916-regulators { + compatible = "qcom,rpm-pm8916-regulators"; + + pm8916_s1: s1 {}; + pm8916_s3: s3 {}; + pm8916_s4: s4 {}; + + pm8916_l1: l1 {}; + pm8916_l2: l2 {}; + pm8916_l3: l3 {}; + pm8916_l4: l4 {}; + pm8916_l5: l5 {}; + pm8916_l6: l6 {}; + pm8916_l7: l7 {}; + pm8916_l8: l8 {}; + pm8916_l9: l9 {}; + pm8916_l10: l10 {}; + pm8916_l11: l11 {}; + pm8916_l12: l12 {}; + pm8916_l13: l13 {}; + pm8916_l14: l14 {}; + pm8916_l15: l15 {}; + pm8916_l16: l16 {}; + pm8916_l17: l17 {}; + pm8916_l18: l18 {}; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index a0c00d9d62c4..b18d21e42f59 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -#include "msm8916.dtsi" -#include "pm8916.dtsi" +#include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -23,78 +22,6 @@ }; }; - soc { - sdhci@7824000 { - status = "okay"; - - vmmc-supply = <&pm8916_l8>; - vqmmc-supply = <&pm8916_l5>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - }; - - sdhci@7864000 { - status = "okay"; - - vmmc-supply = <&pm8916_l11>; - vqmmc-supply = <&pm8916_l12>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; - }; - - serial@78b0000 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - - usb@78d9000 { - status = "okay"; - extcon = <&muic>, <&muic>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy { - extcon = <&muic>; - v1p8-supply = <&pm8916_l7>; - v3p3-supply = <&pm8916_l13>; - }; - }; - }; - - mdss@1a00000 { - dsi@1a98000 { - #address-cells = <1>; - #size-cells = <0>; - - vdda-supply = <&pm8916_l2>; - vddio-supply = <&pm8916_l6>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mdss_default>; - pinctrl-1 = <&mdss_sleep>; - }; - - dsi-phy@1a98300 { - vddio-supply = <&pm8916_l6>; - }; - }; - - wcnss@a21b000 { - status = "okay"; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -154,7 +81,7 @@ #address-cells = <1>; #size-cells = <0>; - muic: sm5502@25 { + muic: extcon@25 { compatible = "siliconmitus,sm5502-muic"; reg = <0x25>; @@ -186,17 +113,50 @@ }; }; -&spmi_bus { - pm8916@0 { - pon@800 { - volume-down { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; - }; +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&muic>, <&muic>; +}; + +&usb_hs_phy { + extcon = <&muic>; }; &smd_rpm_regulators { diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 410c7d199f96..086f07ead5cb 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -44,15 +44,11 @@ }; }; }; +}; - ports { - port@1 { - dsi0_out: endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1>; - }; - }; - }; +&dsi0_out { + data-lanes = <0 1>; + remote-endpoint = <&panel_in>; }; &msmgpio { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 67cae5f9e47e..aaa21899f1a6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -4,11 +4,11 @@ */ #include <dt-bindings/arm/coresight-cti-dt.h> +#include <dt-bindings/clock/qcom,gcc-msm8916.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/interconnect/qcom,msm8916.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/qcom,gcc-msm8916.h> #include <dt-bindings/reset/qcom,gcc-msm8916.h> -#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/thermal/thermal.h> / { @@ -94,6 +94,20 @@ }; }; + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -151,8 +165,8 @@ }; L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; + compatible = "cache"; + cache-level = <2>; }; idle-states { @@ -189,6 +203,42 @@ }; }; + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + }; + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8916", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -223,162 +273,24 @@ }; }; - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; - }; - - thermal-zones { - cpu0_1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; - - trips { - cpu0_1_alert0: trip-point@0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu0_1_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu0_1_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu2_3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; - - trips { - cpu2_3_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu2_3_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu2_3_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - gpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 2>; - - trips { - gpu_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - gpu_crit: gpu_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - camera-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 1>; - - trips { - cam_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; + smd { + compatible = "qcom,smd"; - modem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; - thermal-sensors = <&tsens 0>; + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; - trips { - modem_alert0: trip-point0 { - temperature = <85000>; - hysteresis = <2000>; - type = "hot"; + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8916"; + #clock-cells = <1>; }; }; }; - - }; - - cpu_opp_table: cpu-opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - }; - opp-998400000 { - opp-hz = /bits/ 64 <998400000>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; }; smem { @@ -390,509 +302,93 @@ hwlocks = <&tcsr_mutex 3>; }; - firmware { - scm: scm { - compatible = "qcom,scm"; - clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; - clock-names = "core", "bus", "iface"; - #reset-cells = <1>; + smp2p-hexagon { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; - qcom,dload-mode = <&tcsr 0x6100>; - }; - }; + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - compatible = "simple-bus"; + qcom,ipc = <&apcs 8 14>; - bimc: interconnect@400000 { - compatible = "qcom,msm8916-bimc"; - reg = <0x00400000 0x62000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; - restart@4ab000 { - compatible = "qcom,pshold"; - reg = <0x4ab000 0x4>; - }; + hexagon_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; - pcnoc: interconnect@500000 { - compatible = "qcom,msm8916-pcnoc"; - reg = <0x00500000 0x11000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_PCNOC_A_CLK>; + #qcom,smem-state-cells = <1>; }; - snoc: interconnect@580000 { - compatible = "qcom,msm8916-snoc"; - reg = <0x00580000 0x14000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; - }; + hexagon_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; - msmgpio: pinctrl@1000000 { - compatible = "qcom,msm8916-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 122>; - #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; + }; - gcc: clock-controller@1800000 { - compatible = "qcom,gcc-msm8916"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x1800000 0x80000>; - }; - - tcsr_mutex_regs: syscon@1905000 { - compatible = "syscon"; - reg = <0x1905000 0x20000>; - }; - - tcsr: syscon@1937000 { - compatible = "qcom,tcsr-msm8916", "syscon"; - reg = <0x1937000 0x30000>; - }; - - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - - rpm_msg_ram: memory@60000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0x60000 0x8000>; - }; - - blsp1_uart1: serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 1>, <&blsp_dma 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - a53pll: clock@b016000 { - compatible = "qcom,msm8916-a53pll"; - reg = <0xb016000 0x40>; - #clock-cells = <0>; - }; - - apcs: mailbox@b011000 { - compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; - reg = <0xb011000 0x1000>; - #mbox-cells = <1>; - clocks = <&a53pll>, <&gcc GPLL0_VOTE>; - clock-names = "pll", "aux"; - #clock-cells = <0>; - }; - - blsp1_uart2: serial@78b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78b0000 0x200>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 3>, <&blsp_dma 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - blsp_dma: dma@7884000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07884000 0x23000>; - interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - status = "disabled"; - }; - - blsp_spi1: spi@78b5000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b5000 0x500>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 5>, <&blsp_dma 4>; - dma-names = "rx", "tx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi1_default>; - pinctrl-1 = <&spi1_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi2: spi@78b6000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b6000 0x500>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 7>, <&blsp_dma 6>; - dma-names = "rx", "tx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi2_default>; - pinctrl-1 = <&spi2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi3: spi@78b7000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b7000 0x500>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 9>, <&blsp_dma 8>; - dma-names = "rx", "tx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi3_default>; - pinctrl-1 = <&spi3_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi4: spi@78b8000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b8000 0x500>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 11>, <&blsp_dma 10>; - dma-names = "rx", "tx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi4_default>; - pinctrl-1 = <&spi4_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi5: spi@78b9000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b9000 0x500>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 13>, <&blsp_dma 12>; - dma-names = "rx", "tx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi5_default>; - pinctrl-1 = <&spi5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; - blsp_spi6: spi@78ba000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078ba000 0x500>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&spi6_default>; - pinctrl-1 = <&spi6_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - blsp_i2c1: i2c@78b5000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b5000 0x500>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_default>; - pinctrl-1 = <&i2c1_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c2: i2c@78b6000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b6000 0x500>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c2_default>; - pinctrl-1 = <&i2c2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + qcom,ipc = <&apcs 8 18>; - blsp_i2c4: i2c@78b8000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b8000 0x500>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c4_default>; - pinctrl-1 = <&i2c4_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + qcom,local-pid = <0>; + qcom,remote-pid = <4>; - blsp_i2c5: i2c@78b9000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b9000 0x500>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; - blsp_i2c6: i2c@78ba000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078ba000 0x500>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c6_default>; - pinctrl-1 = <&i2c6_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + #qcom,smem-state-cells = <1>; }; - lpass: lpass@7708000 { - status = "disabled"; - compatible = "qcom,lpass-cpu-apq8016"; - clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; - - clock-names = "ahbix-clk", - "pcnoc-mport-clk", - "pcnoc-sway-clk", - "mi2s-bit-clk0", - "mi2s-bit-clk1", - "mi2s-bit-clk2", - "mi2s-bit-clk3"; - #sound-dai-cells = <1>; - - interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "lpass-irq-lpaif"; - reg = <0x07708000 0x10000>; - reg-names = "lpass-lpaif"; + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; - #address-cells = <1>; - #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <2>; }; + }; - lpass_codec: codec{ - compatible = "qcom,msm8916-wcd-digital-codec"; - reg = <0x0771c000 0x400>; - clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, - <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "ahbix-clk", "mclk"; - #sound-dai-cells = <1>; - }; + smsm { + compatible = "qcom,smsm"; - sdhc_1: sdhci@7824000 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x07824900 0x11c>, <0x07824000 0x800>; - reg-names = "hc_mem", "core_mem"; + #address-cells = <1>; + #size-cells = <0>; - interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - mmc-ddr-1_8v; - bus-width = <8>; - non-removable; - status = "disabled"; - }; + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-3 = <&apcs 8 19>; - sdhc_2: sdhci@7864000 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x07864900 0x11c>, <0x07864000 0x800>; - reg-names = "hc_mem", "core_mem"; + apps_smsm: apps@0 { + reg = <0>; - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - bus-width = <4>; - status = "disabled"; + #qcom,smem-state-cells = <1>; }; - otg: usb@78d9000 { - compatible = "qcom,ci-hdrc"; - reg = <0x78d9000 0x200>, - <0x78d9200 0x200>; - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_USB_HS_AHB_CLK>, - <&gcc GCC_USB_HS_SYSTEM_CLK>; - clock-names = "iface", "core"; - assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; - assigned-clock-rates = <80000000>; - resets = <&gcc GCC_USB_HS_BCR>; - reset-names = "core"; - phy_type = "ulpi"; - dr_mode = "otg"; - ahb-burst-config = <0>; - phy-names = "usb-phy"; - phys = <&usb_hs_phy>; - status = "disabled"; - #reset-cells = <1>; - - ulpi { - usb_hs_phy: phy { - compatible = "qcom,usb-hs-phy-msm8916", - "qcom,usb-hs-phy"; - #phy-cells = <0>; - clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; - clock-names = "ref", "sleep"; - resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; - reset-names = "phy", "por"; - qcom,init-seq = /bits/ 8 <0x0 0x44 - 0x1 0x6b 0x2 0x24 0x3 0x13>; - }; - }; - }; + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - intc: interrupt-controller@b000000 { - compatible = "qcom,msm-qgic2"; interrupt-controller; - #interrupt-cells = <3>; - reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + #interrupt-cells = <2>; }; - timer@b020000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0xb020000 0x1000>; - clock-frequency = <19200000>; - - frame@b021000 { - frame-number = <0>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb021000 0x1000>, - <0xb022000 0x1000>; - }; - - frame@b023000 { - frame-number = <1>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb023000 0x1000>; - status = "disabled"; - }; - - frame@b024000 { - frame-number = <2>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb024000 0x1000>; - status = "disabled"; - }; - - frame@b025000 { - frame-number = <3>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb025000 0x1000>; - status = "disabled"; - }; - - frame@b026000 { - frame-number = <4>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb026000 0x1000>; - status = "disabled"; - }; - - frame@b027000 { - frame-number = <5>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb027000 0x1000>; - status = "disabled"; - }; - - frame@b028000 { - frame-number = <6>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb028000 0x1000>; - status = "disabled"; - }; - }; + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; - spmi_bus: spmi@200f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x200f000 0x001000>, - <0x2400000 0x400000>, - <0x2c00000 0x400000>, - <0x3800000 0x200000>, - <0x200a000 0x002100>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; interrupt-controller; - #interrupt-cells = <4>; + #interrupt-cells = <2>; }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; rng@22000 { compatible = "qcom,prng"; @@ -901,9 +397,14 @@ clock-names = "core"; }; + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + qfprom: qfprom@5c000 { compatible = "qcom,qfprom"; - reg = <0x5c000 0x1000>; + reg = <0x0005c000 0x1000>; #address-cells = <1>; #size-cells = <1>; tsens_caldata: caldata@d0 { @@ -914,10 +415,24 @@ }; }; + rpm_msg_ram: memory@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + tsens: thermal-sensor@4a9000 { compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; nvmem-cell-names = "calib", "calib_sel"; #qcom,sensors = <5>; @@ -926,365 +441,52 @@ #thermal-sensor-cells = <1>; }; - apps_iommu: iommu@1ef0000 { - #address-cells = <1>; - #size-cells = <1>; - #iommu-cells = <1>; - compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; - ranges = <0 0x1e20000 0x40000>; - reg = <0x1ef0000 0x3000>; - clocks = <&gcc GCC_SMMU_CFG_CLK>, - <&gcc GCC_APSS_TCU_CLK>; - clock-names = "iface", "bus"; - qcom,iommu-secure-id = <17>; - - // vfe: - iommu-ctx@3000 { - compatible = "qcom,msm-iommu-v1-sec"; - reg = <0x3000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - }; - - // mdp_0: - iommu-ctx@4000 { - compatible = "qcom,msm-iommu-v1-ns"; - reg = <0x4000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - }; - - // venus_ns: - iommu-ctx@5000 { - compatible = "qcom,msm-iommu-v1-sec"; - reg = <0x5000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - gpu_iommu: iommu@1f08000 { - #address-cells = <1>; - #size-cells = <1>; - #iommu-cells = <1>; - compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; - ranges = <0 0x1f08000 0x10000>; - clocks = <&gcc GCC_SMMU_CFG_CLK>, - <&gcc GCC_GFX_TCU_CLK>; - clock-names = "iface", "bus"; - qcom,iommu-secure-id = <18>; - - // gfx3d_user: - iommu-ctx@1000 { - compatible = "qcom,msm-iommu-v1-ns"; - reg = <0x1000 0x1000>; - interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; - }; - - // gfx3d_priv: - iommu-ctx@2000 { - compatible = "qcom,msm-iommu-v1-ns"; - reg = <0x2000 0x1000>; - interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - gpu@1c00000 { - compatible = "qcom,adreno-306.0", "qcom,adreno"; - reg = <0x01c00000 0x20000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = - "core", - "iface", - "mem", - "mem_iface", - "alt_mem_iface", - "gfx3d"; - clocks = - <&gcc GCC_OXILI_GFX3D_CLK>, - <&gcc GCC_OXILI_AHB_CLK>, - <&gcc GCC_OXILI_GMEM_CLK>, - <&gcc GCC_BIMC_GFX_CLK>, - <&gcc GCC_BIMC_GPU_CLK>, - <&gcc GFX3D_CLK_SRC>; - power-domains = <&gcc OXILI_GDSC>; - operating-points-v2 = <&gpu_opp_table>; - iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - }; - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - }; - }; + pcnoc: interconnect@500000 { + compatible = "qcom,msm8916-pcnoc"; + reg = <0x00500000 0x11000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; }; - mdss: mdss@1a00000 { - compatible = "qcom,mdss"; - reg = <0x1a00000 0x1000>, - <0x1ac8000 0x3000>; - reg-names = "mdss_phys", "vbif_phys"; - - power-domains = <&gcc MDSS_GDSC>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync"; - - interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; - - interrupt-controller; - #interrupt-cells = <1>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mdp: mdp@1a01000 { - compatible = "qcom,mdp5"; - reg = <0x1a01000 0x89000>; - reg-names = "mdp_phys"; - - interrupt-parent = <&mdss>; - interrupts = <0 0>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; - - iommus = <&apps_iommu 4>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - }; - }; - - dsi0: dsi@1a98000 { - compatible = "qcom,mdss-dsi-ctrl"; - reg = <0x1a98000 0x25c>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <4 0>; - - assigned-clocks = <&gcc BYTE0_CLK_SRC>, - <&gcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy0 0>, - <&dsi_phy0 1>; - - clocks = <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_BYTE0_CLK>, - <&gcc GCC_MDSS_PCLK0_CLK>, - <&gcc GCC_MDSS_ESC0_CLK>; - clock-names = "mdp_core", - "iface", - "bus", - "byte", - "pixel", - "core"; - phys = <&dsi_phy0>; - phy-names = "dsi-phy"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp5_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - }; - }; - }; - }; - - dsi_phy0: dsi-phy@1a98300 { - compatible = "qcom,dsi-phy-28nm-lp"; - reg = <0x1a98300 0xd4>, - <0x1a98500 0x280>, - <0x1a98780 0x30>; - reg-names = "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; - - #clock-cells = <1>; - #phy-cells = <0>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "ref"; - }; + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + reg = <0x00580000 0x14000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; }; + /* System CTIs */ + /* CTI 0 - TMC connections */ + cti0: cti@810000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x00810000 0x1000>; - hexagon@4080000 { - compatible = "qcom,q6v5-pil"; - reg = <0x04080000 0x100>, - <0x04020000 0x040>; - - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc 0 24 1>, - <&hexagon_smp2p_in 0 0>, - <&hexagon_smp2p_in 1 0>, - <&hexagon_smp2p_in 2 0>, - <&hexagon_smp2p_in 3 0>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "bus", "mem", "xo"; - - qcom,smem-states = <&hexagon_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - resets = <&scm 0>; - reset-names = "mss_restart"; - - cx-supply = <&pm8916_s1>; - mx-supply = <&pm8916_l3>; - pll-supply = <&pm8916_l7>; - - qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; status = "disabled"; - - mba { - memory-region = <&mba_mem>; - }; - - mpss { - memory-region = <&mpss_mem>; - }; - - smd-edge { - interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; - - qcom,smd-edge = <0>; - qcom,ipc = <&apcs 8 12>; - qcom,remote-pid = <1>; - - label = "hexagon"; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,smd-channels = "fastrpcsmd-apps-dsp"; - label = "adsp"; - - #address-cells = <1>; - #size-cells = <0>; - - cb@1{ - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - }; - }; - }; }; - pronto: wcnss@a21b000 { - compatible = "qcom,pronto-v2-pil", "qcom,pronto"; - reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; - reg-names = "ccu", "dxe", "pmu"; - - memory-region = <&wcnss_mem>; - - interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - vddmx-supply = <&pm8916_l3>; - vddpx-supply = <&pm8916_l7>; - - qcom,state = <&wcnss_smp2p_out 0>; - qcom,state-names = "stop"; + /* CTI 1 - TPIU connections */ + cti1: cti@811000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x00811000 0x1000>; - pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; status = "disabled"; - - iris { - compatible = "qcom,wcn3620"; - - clocks = <&rpmcc RPM_SMD_RF_CLK2>; - clock-names = "xo"; - - vddxo-supply = <&pm8916_l7>; - vddrfa-supply = <&pm8916_s3>; - vddpa-supply = <&pm8916_l9>; - vdddig-supply = <&pm8916_l5>; - }; - - smd-edge { - interrupts = <0 142 1>; - - qcom,ipc = <&apcs 8 17>; - qcom,smd-edge = <6>; - qcom,remote-pid = <4>; - - label = "pronto"; - - wcnss { - compatible = "qcom,wcnss"; - qcom,smd-channels = "WCNSS_CTRL"; - - qcom,mmio = <&pronto>; - - bt { - compatible = "qcom,wcnss-bt"; - }; - - wifi { - compatible = "qcom,wcnss-wlan"; - - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>, - <0 146 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - - qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; - }; - }; - }; }; - tpiu@820000 { + /* CTIs 2-11 - no information - not instantiated */ + + tpiu: tpiu@820000 { compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0x820000 0x1000>; + reg = <0x00820000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1300,9 +502,9 @@ }; }; - funnel@821000 { + funnel0: funnel@821000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x821000 0x1000>; + reg = <0x00821000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1341,9 +543,9 @@ }; }; - replicator@824000 { + replicator: replicator@824000 { compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0x824000 0x1000>; + reg = <0x00824000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1377,9 +579,9 @@ }; }; - etf@825000 { + etf: etf@825000 { compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x825000 0x1000>; + reg = <0x00825000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1403,9 +605,9 @@ }; }; - etr@826000 { + etr: etr@826000 { compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x826000 0x1000>; + reg = <0x00826000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1421,9 +623,9 @@ }; }; - funnel@841000 { /* APSS funnel only 4 inputs are used */ + funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x841000 0x1000>; + reg = <0x00841000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1469,45 +671,106 @@ }; }; - debug@850000 { - compatible = "arm,coresight-cpu-debug","arm,primecell"; - reg = <0x850000 0x1000>; + debug0: debug@850000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00850000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU0>; status = "disabled"; }; - debug@852000 { - compatible = "arm,coresight-cpu-debug","arm,primecell"; - reg = <0x852000 0x1000>; + debug1: debug@852000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00852000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU1>; status = "disabled"; }; - debug@854000 { - compatible = "arm,coresight-cpu-debug","arm,primecell"; - reg = <0x854000 0x1000>; + debug2: debug@854000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00854000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU2>; + status = "disabled"; + }; + + debug3: debug@856000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00856000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU3>; + status = "disabled"; + }; + + /* Core CTIs; CTIs 12-15 */ + /* CTI - CPU-0 */ + cti12: cti@858000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x00858000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + arm,cs-dev-assoc = <&etm0>; + + status = "disabled"; + }; + + /* CTI - CPU-1 */ + cti13: cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x00859000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + + status = "disabled"; + }; + + /* CTI - CPU-2 */ + cti14: cti@85a000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x0085a000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; + cpu = <&CPU2>; + arm,cs-dev-assoc = <&etm2>; + status = "disabled"; }; - debug@856000 { - compatible = "arm,coresight-cpu-debug","arm,primecell"; - reg = <0x856000 0x1000>; + /* CTI - CPU-3 */ + cti15: cti@85b000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x0085b000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; + cpu = <&CPU3>; + arm,cs-dev-assoc = <&etm3>; + status = "disabled"; }; etm0: etm@85c000 { compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x85c000 0x1000>; + reg = <0x0085c000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1528,7 +791,7 @@ etm1: etm@85d000 { compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x85d000 0x1000>; + reg = <0x0085d000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1549,7 +812,7 @@ etm2: etm@85e000 { compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x85e000 0x1000>; + reg = <0x0085e000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1570,7 +833,7 @@ etm3: etm@85f000 { compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x85f000 0x1000>; + reg = <0x0085f000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1589,126 +852,171 @@ }; }; - /* System CTIs */ - /* CTI 0 - TMC connections */ - cti@810000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x810000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - status = "disabled"; + msmgpio: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; - /* CTI 1 - TPIU connections */ - cti@811000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x811000 0x1000>; + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8916"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x01800000 0x80000>; + }; - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; - status = "disabled"; + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x01937000 0x30000>; }; - /* CTIs 2-11 - no information - not instantiated */ + mdss: mdss@1a00000 { + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; - /* Core CTIs; CTIs 12-15 */ - /* CTI - CPU-0 */ - cti@858000 { - compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", - "arm,primecell"; - reg = <0x858000 0x1000>; + power-domains = <&gcc MDSS_GDSC>; - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; - cpu = <&CPU0>; - arm,cs-dev-assoc = <&etm0>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + interrupt-controller; + #interrupt-cells = <1>; - /* CTI - CPU-1 */ - cti@859000 { - compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", - "arm,primecell"; - reg = <0x859000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; + mdp: mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; - cpu = <&CPU1>; - arm,cs-dev-assoc = <&etm1>; + interrupt-parent = <&mdss>; + interrupts = <0>; - status = "disabled"; - }; + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; - /* CTI - CPU-2 */ - cti@85a000 { - compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", - "arm,primecell"; - reg = <0x85a000 0x1000>; + iommus = <&apps_iommu 4>; - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; - cpu = <&CPU2>; - arm,cs-dev-assoc = <&etm2>; + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; - status = "disabled"; - }; + dsi0: dsi@1a98000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x01a98000 0x25c>; + reg-names = "dsi_ctrl"; - /* CTI - CPU-3 */ - cti@85b000 { - compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", - "arm,primecell"; - reg = <0x85b000 0x1000>; + interrupt-parent = <&mdss>; + interrupts = <4>; - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; - cpu = <&CPU3>; - arm,cs-dev-assoc = <&etm3>; + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&dsi_phy0>; + phy-names = "dsi-phy"; - status = "disabled"; - }; + #address-cells = <1>; + #size-cells = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - venus: video-codec@1d00000 { - compatible = "qcom,msm8916-venus"; - reg = <0x01d00000 0xff000>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&gcc VENUS_GDSC>; - clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, - <&gcc GCC_VENUS0_AHB_CLK>, - <&gcc GCC_VENUS0_AXI_CLK>; - clock-names = "core", "iface", "bus"; - iommus = <&apps_iommu 5>; - memory-region = <&venus_mem>; - status = "okay"; + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; - video-decoder { - compatible = "venus-decoder"; + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; }; - video-encoder { - compatible = "venus-encoder"; + dsi_phy0: dsi-phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01a98300 0xd4>, + <0x01a98500 0x280>, + <0x01a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "ref"; }; }; camss: camss@1b00000 { compatible = "qcom,msm8916-camss"; - reg = <0x1b0ac00 0x200>, - <0x1b00030 0x4>, - <0x1b0b000 0x200>, - <0x1b00038 0x4>, - <0x1b08000 0x100>, - <0x1b08400 0x100>, - <0x1b0a000 0x500>, - <0x1b00020 0x10>, - <0x1b10000 0x1000>; + reg = <0x01b0ac00 0x200>, + <0x01b00030 0x4>, + <0x01b0b000 0x200>, + <0x01b00038 0x4>, + <0x01b08000 0x100>, + <0x01b08400 0x100>, + <0x01b0a000 0x500>, + <0x01b00020 0x10>, + <0x01b10000 0x1000>; reg-names = "csiphy0", "csiphy0_clk_mux", "csiphy1", @@ -1769,7 +1077,6 @@ "csi_vfe0", "vfe_ahb", "vfe_axi"; - vdda-supply = <&pm8916_l2>; iommus = <&apps_iommu 3>; status = "disabled"; ports { @@ -1782,7 +1089,7 @@ compatible = "qcom,msm8916-cci"; #address-cells = <1>; #size-cells = <0>; - reg = <0x1b0c000 0x1000>; + reg = <0x01b0c000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_CCI_AHB_CLK>, @@ -1804,135 +1111,804 @@ #size-cells = <0>; }; }; - }; - - smd { - compatible = "qcom,smd"; - rpm { - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; + gpu@1c00000 { + compatible = "qcom,adreno-306.0", "qcom,adreno"; + reg = <0x01c00000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core", + "iface", + "mem", + "mem_iface", + "alt_mem_iface", + "gfx3d"; + clocks = + <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_OXILI_GMEM_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>; + power-domains = <&gcc OXILI_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; - rpm-requests { - compatible = "qcom,rpm-msm8916"; - qcom,smd-channels = "rpm_requests"; + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; - rpmcc: qcom,rpmcc { - compatible = "qcom,rpmcc-msm8916"; - #clock-cells = <1>; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; }; - - smd_rpm_regulators: pm8916-regulators { - compatible = "qcom,rpm-pm8916-regulators"; - - pm8916_s1: s1 {}; - pm8916_s3: s3 {}; - pm8916_s4: s4 {}; - - pm8916_l1: l1 {}; - pm8916_l2: l2 {}; - pm8916_l3: l3 {}; - pm8916_l4: l4 {}; - pm8916_l5: l5 {}; - pm8916_l6: l6 {}; - pm8916_l7: l7 {}; - pm8916_l8: l8 {}; - pm8916_l9: l9 {}; - pm8916_l10: l10 {}; - pm8916_l11: l11 {}; - pm8916_l12: l12 {}; - pm8916_l13: l13 {}; - pm8916_l14: l14 {}; - pm8916_l15: l15 {}; - pm8916_l16: l16 {}; - pm8916_l17: l17 {}; - pm8916_l18: l18 {}; + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; }; }; }; - }; - hexagon-smp2p { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; + venus: video-codec@1d00000 { + compatible = "qcom,msm8916-venus"; + reg = <0x01d00000 0xff000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&gcc VENUS_GDSC>; + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, + <&gcc GCC_VENUS0_AHB_CLK>, + <&gcc GCC_VENUS0_AXI_CLK>; + clock-names = "core", "iface", "bus"; + iommus = <&apps_iommu 5>; + memory-region = <&venus_mem>; + status = "okay"; - interrupts = <0 27 IRQ_TYPE_EDGE_RISING>; + video-decoder { + compatible = "venus-decoder"; + }; - qcom,ipc = <&apcs 8 14>; + video-encoder { + compatible = "venus-encoder"; + }; + }; - qcom,local-pid = <0>; - qcom,remote-pid = <1>; + apps_iommu: iommu@1ef0000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01e20000 0x40000>; + reg = <0x01ef0000 0x3000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <17>; - hexagon_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; + // vfe: + iommu-ctx@3000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + }; - #qcom,smem-state-cells = <1>; + // mdp_0: + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + }; + + // venus_ns: + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + }; }; - hexagon_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; + gpu_iommu: iommu@1f08000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <18>; + + // gfx3d_user: + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + }; + + // gfx3d_priv: + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x400000>, + <0x02c00000 0x400000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <4>; }; - }; - wcnss-smp2p { - compatible = "qcom,smp2p"; - qcom,smem = <451>, <431>; + mpss: remoteproc@4080000 { + compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; - interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; + reg-names = "qdsp6", "rmb"; - qcom,ipc = <&apcs 8 18>; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; - qcom,local-pid = <0>; - qcom,remote-pid = <4>; + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; - wcnss_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; - #qcom,smem-state-cells = <1>; + resets = <&scm 0>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,smd-channels = "fastrpcsmd-apps-dsp"; + label = "adsp"; + + #address-cells = <1>; + #size-cells = <0>; + + cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + }; + }; + }; }; - wcnss_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; + sound: sound@7702000 { + status = "disabled"; + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + }; + + lpass: audio-controller@7708000 { + status = "disabled"; + compatible = "qcom,lpass-cpu-apq8016"; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; + + clock-names = "ahbix-clk", + "pcnoc-mport-clk", + "pcnoc-sway-clk", + "mi2s-bit-clk0", + "mi2s-bit-clk1", + "mi2s-bit-clk2", + "mi2s-bit-clk3"; + #sound-dai-cells = <1>; + + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x07708000 0x10000>; + reg-names = "lpass-lpaif"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + lpass_codec: audio-codec@771c000 { + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + }; + sdhc_1: sdhci@7824000 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: sdhci@7864000 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <4>; + status = "disabled"; + }; + + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 1>, <&blsp_dma 0>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 3>, <&blsp_dma 2>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "disabled"; + }; + + blsp_i2c1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 5>, <&blsp_dma 4>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 7>, <&blsp_dma 6>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_default>; + pinctrl-1 = <&spi2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 9>, <&blsp_dma 8>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 11>, <&blsp_dma 10>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi4_default>; + pinctrl-1 = <&spi4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 13>, <&blsp_dma 12>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 15>, <&blsp_dma 14>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi6_default>; + pinctrl-1 = <&spi6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078d9000 0x200>, + <0x078d9200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + qcom,init-seq = /bits/ 8 <0x0 0x44 + 0x1 0x6b 0x2 0x24 0x3 0x13>; + }; + }; + }; + + pronto: remoteproc@a21b000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + qcom,state = <&wcnss_smp2p_out 0>; + qcom,state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3620"; + + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bt { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + clocks = <&a53pll>, <&gcc GPLL0_VOTE>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; + + a53pll: clock@b016000 { + compatible = "qcom,msm8916-a53pll"; + reg = <0x0b016000 0x40>; + #clock-cells = <0>; + }; + + timer@b020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b020000 0x1000>; + clock-frequency = <19200000>; + + frame@b021000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b021000 0x1000>, + <0x0b022000 0x1000>; + }; + + frame@b023000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b023000 0x1000>; + status = "disabled"; + }; + + frame@b024000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b024000 0x1000>; + status = "disabled"; + }; + + frame@b025000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b025000 0x1000>; + status = "disabled"; + }; + + frame@b026000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b026000 0x1000>; + status = "disabled"; + }; + + frame@b027000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b027000 0x1000>; + status = "disabled"; + }; + + frame@b028000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b028000 0x1000>; + status = "disabled"; + }; }; }; - smsm { - compatible = "qcom,smsm"; + thermal-zones { + cpu0-1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - #address-cells = <1>; - #size-cells = <0>; + thermal-sensors = <&tsens 5>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-3 = <&apcs 8 19>; + trips { + cpu0_1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; - apps_smsm: apps@0 { - reg = <0>; + cooling-maps { + map0 { + trip = <&cpu0_1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; - #qcom,smem-state-cells = <1>; + cpu2-3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu2_3_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; - hexagon_smsm: hexagon@1 { - reg = <1>; - interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupt-controller; - #interrupt-cells = <2>; + thermal-sensors = <&tsens 2>; + + trips { + gpu_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; - wcnss_smsm: wcnss@6 { - reg = <6>; - interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupt-controller; - #interrupt-cells = <2>; + thermal-sensors = <&tsens 1>; + + trips { + cam_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + modem_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 188fff2095f1..8626b3a50eda 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -335,7 +335,7 @@ blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; - interrupt = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 9951286db775..fd6ae5464dea 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1009,7 +1009,8 @@ "ispif", "vfe0", "vfe1"; - power-domains = <&mmcc VFE0_GDSC>; + power-domains = <&mmcc VFE0_GDSC>, + <&mmcc VFE1_GDSC>; clocks = <&mmcc CAMSS_TOP_AHB_CLK>, <&mmcc CAMSS_ISPIF_AHB_CLK>, <&mmcc CAMSS_CSI0PHYTIMER_CLK>, diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 0bcdf0471107..f931cb0de231 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -1,24 +1,17 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/iio/qcom,spmi-vadc.h> -#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { - pm8916_0: pm8916@0 { + pm8916_0: pmic@0 { compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - rtc@6000 { - compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; - }; - pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x800>; @@ -33,6 +26,14 @@ linux,code = <KEY_POWER>; }; + pm8916_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + watchdog { compatible = "qcom,pm8916-wdt"; interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; @@ -40,28 +41,6 @@ }; }; - pm8916_gpios: gpios@c000 { - compatible = "qcom,pm8916-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; - }; - - pm8916_mpps: mpps@a000 { - compatible = "qcom,pm8916-mpp"; - reg = <0xa000>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>; - }; - pm8916_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; @@ -71,7 +50,7 @@ #thermal-sensor-cells = <0>; }; - pm8916_vadc: vadc@3100 { + pm8916_vadc: adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; @@ -79,33 +58,62 @@ #size-cells = <0>; #io-channel-cells = <1>; - usb_in { + adc-chan@0 { reg = <VADC_USBIN>; qcom,pre-scaling = <1 10>; }; - vph_pwr { + adc-chan@7 { reg = <VADC_VSYS>; qcom,pre-scaling = <1 3>; }; - die_temp { + adc-chan@8 { reg = <VADC_DIE_TEMP>; }; - ref_625mv { + adc-chan@9 { reg = <VADC_REF_625MV>; }; - ref_1250v { + adc-chan@a { reg = <VADC_REF_1250MV>; }; - ref_gnd { + adc-chan@e { reg = <VADC_GND_REF>; }; - ref_vdd { + adc-chan@f { reg = <VADC_VDD_VADC>; }; }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8916_mpps: mpps@a000 { + compatible = "qcom,pm8916-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>; + }; + + pm8916_gpios: gpios@c000 { + compatible = "qcom,pm8916-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>; + }; }; - pm8916_1: pm8916@1 { + pm8916_1: pmic@1 { compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; @@ -117,9 +125,9 @@ status = "disabled"; }; - wcd_codec: codec@f000 { + wcd_codec: audio-codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; - reg = <0xf000 0x200>; + reg = <0xf000>; reg-names = "pmic-codec-core"; clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "mclk"; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 479ad3ac6c28..08d5d51221cf 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -13,7 +13,7 @@ }; ðernet { - status = "ok"; + status = "okay"; snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; snps,reset-active-low; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 6422cf9d5855..a80c578484ba 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -97,7 +97,7 @@ }; &pcie { - status = "ok"; + status = "okay"; perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>; @@ -106,22 +106,22 @@ }; &pcie_phy { - status = "ok"; + status = "okay"; vdda-vp-supply = <&vreg_l3_1p05>; vdda-vph-supply = <&vreg_l5_1p8>; }; &remoteproc_adsp { - status = "ok"; + status = "okay"; }; &remoteproc_cdsp { - status = "ok"; + status = "okay"; }; &remoteproc_wcss { - status = "ok"; + status = "okay"; }; &rpm_requests { @@ -215,7 +215,7 @@ }; &sdcc1 { - status = "ok"; + status = "okay"; supports-cqe; mmc-ddr-1_8v; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts new file mode 100644 index 000000000000..1528a865f1f8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -0,0 +1,686 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB5"; + compatible = "qcom,qrb5165-rb5", "qcom,sm8250"; + + aliases { + serial0 = &uart12; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dc12v: dc12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + user4 { + label = "green:user4"; + gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "panic-indicator"; + default-state = "off"; + }; + + wlan { + label = "yellow:wlan"; + gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt { + label = "blue:bt"; + gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + vin-supply = <&vreg_l11c_3p3>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vbat_som: vbat-som-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vdc_3v3: vdc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdc_5v: vdc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vreg_l11c_3p3>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&apps_rsc { + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_l1f_1p1: ldo1 { + regulator-name = "vreg_l1f_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p2: ldo2 { + regulator-name = "vreg_l2f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p7: ldo7 { + regulator-name = "vreg_l7a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_ts_3p0: ldo13 { + regulator-name = "vreg_l13a_ts_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p92: ldo18 { + regulator-name = "vreg_l18a_0p92"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p2: ldo2 { + regulator-name = "vreg_l2c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p7: ldo4 { + regulator-name = "vreg_l4c_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_cam_vcm0_2p85: ldo7 { + regulator-name = "vreg_l7c_cam_vcm0_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p0: ldo10 { + regulator-name = "vreg_l10c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-name = "vreg_l11c_3p3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3296000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_s8c_1p3: smps8 { + regulator-name = "vreg_s8c_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +/* LS-I2C0 */ +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +/* LS-I2C1 */ +&i2c15 { + status = "okay"; +}; + +&pm8150_gpios { + gpio-reserved-ranges = <1 1>, <3 2>, <7 1>; + gpio-line-names = + "NC", + "OPTION2", + "PM_GPIO-F", + "PM_SLP_CLK_IN", + "OPTION1", + "VOL_UP_N", + "PM8250_GPIO7", /* Blue LED */ + "SP_ARI_PWR_ALARM", + "GPIO_9_P", /* Yellow LED */ + "GPIO_10_P"; /* Green LED */ +}; + +&pm8150b_gpios { + gpio-line-names = + "NC", + "NC", + "NC", + "NC", + "HAP_BOOST_EN", /* SOM */ + "SMB_STAT", /* SOM */ + "NC", + "NC", + "SDM_FORCE_USB_BOOT", + "NC", + "NC", + "NC"; +}; + +&pm8150l_gpios { + gpio-line-names = + "NC", + "PM3003A_EN", + "NC", + "NC", + "PM_GPIO5", /* HDMI RST_N */ + "PM_GPIO-A", /* PWM */ + "PM_GPIO7", + "NC", + "NC", + "PM_GPIO-B", + "NC", + "PM3003A_MODE"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +/* CAN */ +&spi0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <40 4>; + gpio-line-names = + "GPIO-MM", + "GPIO-NN", + "GPIO-OO", + "GPIO-PP", + "GPIO-A", + "GPIO-C", + "GPIO-E", + "GPIO-D", + "I2C0-SDA", + "I2C0-SCL", + "GPIO-TT", /* GPIO_10 */ + "NC", + "GPIO_12_I2C_SDA", + "GPIO_13_I2C_SCL", + "GPIO-X", + "GPIO_15_RGMII_INT", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_20 */ + "HST_BT_EN", + "GPIO-AAA", + "GPIO-BBB", + "GPIO-CCC", + "GPIO-Z", + "GPIO-DDD", + "GPIO-BB", + "GPIO_28_CAN_SPI_MISO", + "GPIO_29_CAN_SPI_MOSI", + "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */ + "GPIO_31_CAN_SPI_CS", + "GPIO-UU", + "NC", + "UART1_TXD_SOM", + "UART1_RXD_SOM", + "UART0_CTS", + "UART0_RTS", + "UART0_TXD", + "UART0_RXD", + "SPI1_MISO", /* GPIO_40 */ + "SPI1_MOSI", + "SPI1_CLK", + "SPI1_CS", + "I2C1_SDA", + "I2C1_SCL", + "GPIO-F", + "GPIO-JJ", + "Board_ID1", + "Board_ID2", + "NC", /* GPIO_50 */ + "NC", + "SPI0_MISO", + "SPI0_MOSI", + "SPI0_SCLK", + "SPI0_CS", + "GPIO-QQ", + "GPIO-RR", + "USB2LAN_RESET", + "USB2LAN_EXTWAKE", + "NC", /* GPIO_60 */ + "NC", + "NC", + "LT9611_INT", + "GPIO-AA", + "USB_CC_DIR", + "GPIO-G", + "GPIO-LL", + "USB_DP_HPD_1P8", + "NC", + "NC", /* GPIO_70 */ + "SD_CMD", + "SD_DAT3", + "SD_SCLK", + "SD_DAT2", + "SD_DAT1", + "SD_DAT0", /* BOOT_CFG3 */ + "SD_UFS_CARD_DET_N", + "GPIO-II", + "PCIE0_RST_N", + "PCIE0_CLK_REQ_N", /* GPIO_80 */ + "PCIE0_WAKE_N", + "GPIO-CC", + "GPIO-DD", + "GPIO-EE", + "GPIO-FF", + "GPIO-GG", + "GPIO-HH", + "GPIO-VV", + "GPIO-WW", + "NC", /* GPIO_90 */ + "NC", + "GPIO-K", + "GPIO-I", + "CSI0_MCLK", + "CSI1_MCLK", + "CSI2_MCLK", + "CSI3_MCLK", + "GPIO-AA", /* CSI4_MCLK */ + "GPIO-BB", /* CSI5_MCLK */ + "GPIO-KK", /* GPIO_100 */ + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", + "CCI_I2C_SDA2", + "CCI_I2C_SCL2", + "CCI_I2C_SDA3", + "CCI_I2C_SCL3", + "GPIO-L", + "NC", /* GPIO_110 */ + "NC", + "ACCEL_INT", + "GYRO_INT", + "GPIO-J", + "GPIO-YY", + "GPIO-H", + "GPIO-ZZ", + "NC", + "NC", + "NC", /* GPIO_120 */ + "NC", + "MAG_INT", + "MAG_DRDY_INT", + "HST_SW_CTRL", + "GPIO-M", + "GPIO-N", + "GPIO-O", + "GPIO-P", + "PS_INT", + "WSA1_EN", /* GPIO_130 */ + "USB_HUB_RESET", + "SDM_FORCE_USB_BOOT", + "I2S1_CLK_HDMI", + "I2S1_DATA0_HDMI", + "I2S1_WS_HDMI", + "GPIO-B", + "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */ + "PCM_CLK", + "PCM_DI", + "PCM_DO", /* GPIO_140 */ + "PCM_FS", + "HST_SLIM_CLK", + "HST_SLIM_DATA", + "GPIO-U", + "GPIO-Y", + "GPIO-R", + "GPIO-Q", + "GPIO-S", + "GPIO-T", + "GPIO-V", /* GPIO_150 */ + "GPIO-W", + "DMIC_CLK1", + "DMIC_DATA1", + "DMIC_CLK2", + "DMIC_DATA2", + "WSA_SWR_CLK", + "WSA_SWR_DATA", + "DMIC_CLK3", + "DMIC_DATA3", + "I2C4_SDA", /* GPIO_160 */ + "I2C4_SCL", + "SPI3_CS1", + "SPI3_CS2", + "SPI2_MISO_LS3", + "SPI2_MOSI_LS3", + "SPI2_CLK_LS3", + "SPI2_ACCEL_CS_LS3", + "SPI2_CS1", + "NC", + "GPIO-SS", /* GPIO_170 */ + "GPIO-XX", + "SPI3_MISO", + "SPI3_MOSI", + "SPI3_CLK", + "SPI3_CS", + "HST_BLE_SNS_UART_TX", + "HST_BLE_SNS_UART_RX", + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; + +&uart12 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l17a_3p0>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-max-microamp = <89900>; + vdda-pll-supply = <&vreg_l9a_1p2>; + vdda-pll-max-microamp = <18800>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index d8b550723b32..e77a7926034a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -346,6 +346,13 @@ &uart3 { status = "okay"; + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart3_sleep>; + bluetooth: wcn3990-bt { compatible = "qcom,wcn3990-bt"; vddio-supply = <&vreg_l10a_1p8>; @@ -353,7 +360,6 @@ vddrf-supply = <&vreg_l2c_1p3>; vddch0-supply = <&vreg_l10c_3p3>; max-speed = <3200000>; - clocks = <&rpmhcc RPMH_RF_CLK2>; }; }; @@ -474,32 +480,30 @@ &qup_uart3_default { pinconf-cts { /* - * Configure a pull-down on 38 (CTS) to match the pull of + * Configure a pull-down on CTS to match the pull of * the Bluetooth module. */ pins = "gpio38"; bias-pull-down; - output-high; }; pinconf-rts { - /* We'll drive 39 (RTS), so no pull */ + /* We'll drive RTS, so no pull */ pins = "gpio39"; drive-strength = <2>; bias-disable; }; pinconf-tx { - /* We'll drive 40 (TX), so no pull */ + /* We'll drive TX, so no pull */ pins = "gpio40"; drive-strength = <2>; bias-disable; - output-high; }; pinconf-rx { /* - * Configure a pull-up on 41 (RX). This is needed to avoid + * Configure a pull-up on RX. This is needed to avoid * garbage data when the TX pin of the Bluetooth module is * in tri-state (module powered off or not driving the * signal yet). @@ -547,3 +551,51 @@ }; }; +&tlmm { + qup_uart3_sleep: qup-uart3-sleep { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "gpio"; + }; + + pinconf-cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + }; + + pinconf-rts { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + bias-pull-down; + }; + + pinconf-tx { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + bias-pull-up; + }; + + pinconf-rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts new file mode 100644 index 000000000000..ae4c23a4fe65 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" + +/ { + model = "Google Lazor (rev0)"; + compatible = "google,lazor-rev0", "qcom,sc7180"; +}; + +&sn65dsi86_out { + /* + * Lane 0 was incorrectly mapped on the cable, but we've now decided + * that the cable is canon and in -rev1+ we'll make a board change + * that means we no longer need the swizzle. + */ + lane-polarities = <1 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts new file mode 100644 index 000000000000..c3f426c3c30a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-r1.dts" + +/ { + model = "Google Lazor (rev1+) with KB Backlight"; + compatible = "google,lazor-sku2", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts new file mode 100644 index 000000000000..73e59cf7752a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor (rev1+) with LTE"; + compatible = "google,lazor-sku0", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts new file mode 100644 index 000000000000..3151ae31c1cc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" + +/ { + model = "Google Lazor (rev1+)"; + compatible = "google,lazor", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi new file mode 100644 index 000000000000..180ef9e04306 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" + +/ { + panel: panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + ports { + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; +}; + +&ap_sar_sensor { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&ts_reset_l { + pinconf { + /* This pin is not connected on -rev0, pull up to park. */ + /delete-property/bias-disable; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "", + "", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "AP_RAM_ID2", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "AP_RAM_ID1", + "AP_SKU_ID2", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "AP_RAM_ID0", + "EN_PP3300_DX_EDP", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "TRACKPAD_INT_1V8_ODL", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "DBG_SPI_HOLD_L", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "EN_PP3300_CODEC", + "EN_PP3300_HUB", + "", + "", + "", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "AP_SKU_ID0", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi new file mode 100644 index 000000000000..44956e3165a1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for LTE SKUs + * + * Copyright 2020 Google LLC. + */ + +&ap_sar_sensor { + label = "proximity-wifi-lte"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", + "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts new file mode 100644 index 000000000000..1123c02bd539 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Trogdor (rev1+) with LTE"; + compatible = "google,trogdor-sku0", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts new file mode 100644 index 000000000000..0a281c24841c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" + +/ { + model = "Google Trogdor (rev1+)"; + compatible = "google,trogdor", "qcom,sc7180"; + + panel: panel { + compatible = "auo,b116xa01"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + ports { + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; +}; + +&ap_sar_sensor_i2c { + /* Not hooked up */ + status = "disabled"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&sdhc_2 { + status = "okay"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "FP_TO_AP_IRQ_L", + "FP_RST_L", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "FPMCU_BOOT0", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "PEN_RST_ODL", + "AP_RAM_ID1", + "AP_RAM_ID2", + "PEN_IRQ_L", + "FPMCU_SEL", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "AP_RAM_ID0", + "EN_PP3300_DX_EDP", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "PEN_PDCT_L", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "TRACKPAD_INT_1V8_ODL", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "DBG_SPI_HOLD_L", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "EN_PP3300_CODEC", + "EN_PP3300_HUB", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "AP_SKU_ID0", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi new file mode 100644 index 000000000000..bf875589d364 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -0,0 +1,1402 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor device tree source (common between revisions) + * + * Copyright 2019 Google LLC. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &aop_mem; +/delete-node/ &sec_apps_mem; +/delete-node/ &tz_mem; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x84400000 0x0 0x800000>; +}; + +/ { + reserved-memory { + atf_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + mpss_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x8c00000>; + no-map; + }; + + camera_mem: memory@8ec00000 { + reg = <0x0 0x8ec00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8f600000 { + reg = <0 0x8f600000 0 0x500000>; + no-map; + }; + + wlan_mem: memory@94100000 { + reg = <0x0 0x94100000 0x0 0x200000>; + no-map; + }; + + mba_mem: memory@94400000 { + reg = <0x0 0x94400000 0x0 0x200000>; + no-map; + }; + }; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + serial0 = &uart8; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_a: pp5000-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_a"; + + /* EC turns on with en_pp5000_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_a: pp3300-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_a"; + + /* EC turns on with en_pp3300_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* + * Actually should be pp3300 but that's practically an alias for + * pp3300_a so we use pp3300's vin-supply here to avoid one more + * node. + */ + vin-supply = <&ppvar_sys>; + }; + + pp3300_audio: + pp3300_codec: pp3300-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_codec"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_codec>; + + vin-supply = <&pp3300_a>; + }; + + pp3300_dx_edp: + pp3300_ts: pp3300-dx-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_dx_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + + vin-supply = <&pp3300_a>; + }; + + pp3300_fp_tp: pp3300-fp-tp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_fp_tp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* AP turns on with PP1800_VIO_OUT; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_a>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + backlight: backlight { + compatible = "pwm-backlight"; + + pwms = <&cros_ec_pwm 1>; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + power-supply = <&ppvar_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_edp_bklten>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_pdct_l>; + + pen-insert { + label = "Pen Insert"; + + /* Insert = low, eject = high */ + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + }; + + max98357a: audio-codec-0 { + compatible = "maxim,max98357a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + pwmleds { + compatible = "pwm-leds"; + keyboard_backlight: keyboard-backlight { + status = "disabled"; + label = "cros_ec::kbd_backlight"; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&qfprom { + vcc-supply = <&pp1800_l11a>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* TODO: Increase frequency after testing */ + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&apps_rsc { + pm6150-rpmh-regulators { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vddpx_1: + vdd2: + pp1125_s1a: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + /* + * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just + * inputs to other rails on AOP-managed PMICs on trogdor. + * The system is already configured to manage these rails + * automatically (enable when needed, adjust voltage for + * headroom) so we won't specify anything here. + * + * NOTE: though the rails have a voltage implied by their + * name, the automatic headroom calculation might not result + * in them being that voltage. ...and that's OK. + * Specifically the only point of these rails is to provide + * an input source for other rails and if we can satisify the + * needs of those other rails with a lower source voltage then + * we save power. + */ + + pp1200_l1a: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1000_l2a: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1000_l3a: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qlink_lv: + vdd_qlink_lv_ck: + vdd_qusb_hs0_core: + vdd_ufs1_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_csi3_0p9: + vdda_mipi_dsi0_pll: + vdda_pll_cc_ebi01: + vdda_qrefs_0p9: + vdda_usb_ss_dp_core: + pp900_l4a: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2700_l5a: ldo5 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ebi0_cal: + ebi1_cal: + vddio_ck_ebi0: + vddio_ck_ebi1: + vddio_ebi0: + vddq: + pp600_l6a: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_cx_wlan: + pp800_l9a: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd1: + vddpx_3: + vddpx_7: + vio_in: + pp1800_l10a: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdda_apc1_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_bb_clk: + pp1800_l11a: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + mcp_vccq: + pp1800_l12a_r: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l13a: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_prox: + pp1800_l14a: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_alc5682: + pp1800_l15a: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2700_l16a: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vdd_pdphy: + pp3100_l17a: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_pen: + pp1800_l18a: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + mcp_vcc: + pp2850_l19a: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + pp1300_s8c: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + pp1800_l1c: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_adc_dac: + pp1300_l2c: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1200_brij: + vdd_ufs1_1p2: + vdda_csi0_1p25: + vdda_csi1_1p25: + vdda_csi2_1p25: + vdda_csi3_1p25: + vdda_hv_ebi0: + vdda_mipi_dsi0_1p2: + vdda_usb_ss_dp_1p2: + vddpx_10: + pp1200_l3c: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ld_pp1800_esim_l4c: + vddpx_5: + pp1800_l4c: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_6: + pp1800_l5c: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + ppvar_l6c: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_hub: + pp3300_l7c: ldo7 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; + }; + + pp1800_brij_vccio: + pp1800_edp_vpll: + pp1800_l8c: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l9c: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_l10c: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_l11c: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&ap_ec_spi { + status = "okay"; + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <94 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pdupdate { + compatible = "google,cros-ec-pd-update"; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +&ap_h1_spi { + status = "okay"; + cr50: tpm@0 { + compatible = "google,cr50"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + spi-max-frequency = <800000>; + interrupt-parent = <&tlmm>; + interrupts = <42 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&pp1800_edp_vpll>; + vccio-supply = <&pp1800_brij_vccio>; + vcca-supply = <&pp1200_brij>; + vcc-supply = <&pp1200_brij>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; +}; + +ap_sar_sensor_i2c: &i2c5 { + status = "okay"; + clock-frequency = <400000>; + + ap_sar_sensor: proximity@28 { + compatible = "semtech,sx9310"; + reg = <0x28>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&p_sensor_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp3300_a>; + svdd-supply = <&pp1800_prox>; + + status = "disabled"; + label = "proximity-wifi"; + }; +}; + +ap_tp_i2c: &i2c7 { + status = "okay"; + clock-frequency = <400000>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int_1v8_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_fp_tp>; + + wakeup-source; + }; +}; + +hp_i2c: &i2c9 { + status = "okay"; + clock-frequency = <400000>; + + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + /* + * This will get ignored because the interrupt type + * is set in rt5682.c. + */ + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + VBAT-supply = <&pp3300_audio>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + }; +}; + +&ipa { + status = "okay"; + + /* + * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the + * modem needs to cover certain init steps (GSI init), and + * the AP needs to wait for it. + */ + modem-init; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm6150_pwrkey { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7180-mss-pil"; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; + memory-region = <&mba_mem &mpss_mem>; + + /* This gets overridden for SKUs with LTE support. */ + firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn", + "qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + vmmc-supply = <&mcp_vcc>; + vqmmc-supply = <&mcp_vccq>; +}; + +&sdhc_2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&pp2950_l9c>; + vqmmc-supply = <&ppvar_l6c>; + + cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; +}; + +ap_spi_fp: &spi10 { + cros_ec_fp: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>, <&fpmcu_sel>; + spi-max-frequency = <3000000>; + }; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> + +&uart3 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart3_sleep>; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&pp1800_l10a>; + vddxo-supply = <&pp1800_l1c>; + vddrf-supply = <&pp1300_l2c>; + vddch0-supply = <&pp3300_l10c>; + max-speed = <3200000>; + clocks = <&rpmhcc RPMH_RF_CLK2>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + vdd-supply = <&vdd_qusb_hs0_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core>; +}; + +&venus { + video-firmware { + iommus = <&apps_smmu 0x0c42 0x0>; + }; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vdd_cx_wlan>; + vdd-1.8-xo-supply = <&pp1800_l1c>; + vdd-1.3-rfa-supply = <&pp1300_l2c>; + vdd-3.3-ch0-supply = <&pp3300_l10c>; + vdd-3.3-ch1-supply = <&pp3300_l11c>; + + wifi-firmware { + iommus = <&apps_smmu 0xc2 0x1>; + }; +}; + +/* PINCTRL - additions to nodes defined in sc7180.dtsi */ + +&qspi_cs0 { + pinconf { + pins = "gpio68"; + bias-disable; + }; +}; + +&qspi_clk { + pinconf { + pins = "gpio63"; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio64", "gpio65"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c2_default { + pinconf { + pins = "gpio15", "gpio16"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c4_default { + pinconf { + pins = "gpio115", "gpio116"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c5_default { + pinconf { + pins = "gpio25", "gpio26"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c7_default { + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c9_default { + pinconf { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_spi0_default { + pinconf { + pins = "gpio34", "gpio35", "gpio36", "gpio37"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi6_default { + pinconf { + pins = "gpio59", "gpio60", "gpio61", "gpio62"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_default { + pinconf { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart3_default { + pinconf-cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + }; + + pinconf-rts-tx { + /* We'll drive RTS and TX, so no pull */ + pins = "gpio39", "gpio40"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio41"; + bias-pull-up; + }; +}; + +&qup_uart8_default { + pinconf-tx { + pins = "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio45"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&pm6150_gpio { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pm6150l_gpio { + gpio-line-names = "AP_SUSPEND", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +&tlmm { + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default"; + pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>; + + amp_en: amp-en { + pinmux { + pins = "gpio23"; + function = "gpio"; + }; + + pinconf { + pins = "gpio23"; + bias-pull-down; + }; + }; + + ap_ec_int_l: ap-ec-int-l { + pinmux { + pins = "gpio94"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio94"; + bias-pull-up; + }; + }; + + ap_edp_bklten: ap-edp-bklten { + pinmux { + pins = "gpio12"; + function = "gpio"; + }; + + pinconf { + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + + /* Force backlight to be disabled to match state at boot. */ + output-low; + }; + }; + + ap_suspend_l_neuter: ap-suspend-l-neuter { + pinmux { + pins = "gpio27"; + function = "gpio"; + }; + + pinconf { + pins = "gpio27"; + bias-disable; + }; + }; + + bios_flash_wp_l: bios-flash-wp-l { + pinmux { + pins = "gpio66"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio66"; + bias-disable; + }; + }; + + dp_hot_plug_det: dp-hot-plug-det { + pinmux { + pins = "gpio117"; + function = "dp_hot"; + }; + + config { + pins = "gpio117"; + bias-disable; + input-enable; + drive-strength = <2>; + }; + }; + + edp_brij_en: edp-brij-en { + pinmux { + pins = "gpio104"; + function = "gpio"; + }; + + pinconf { + pins = "gpio104"; + drive-strength = <2>; + bias-disable; + }; + }; + + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + en_pp3300_codec: en-pp3300-codec { + pinmux { + pins = "gpio83"; + function = "gpio"; + }; + + pinconf { + pins = "gpio83"; + drive-strength = <2>; + bias-disable; + }; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pinmux { + pins = "gpio30"; + function = "gpio"; + }; + + pinconf { + pins = "gpio30"; + drive-strength = <2>; + bias-disable; + }; + }; + + fpmcu_boot0: fpmcu-boot0 { + pinmux { + pins = "gpio10"; + function = "gpio"; + }; + + pinconf { + pins = "gpio10"; + bias-disable; + drive-strength = <2>; + output-low; + }; + }; + + fpmcu_sel: fpmcu-sel { + pinmux { + pins = "gpio22"; + function = "gpio"; + }; + + pinconf { + pins = "gpio22"; + bias-disable; + drive-strength = <2>; + output-high; + }; + }; + + fp_rst_l: fp-rst-l { + pinmux { + pins = "gpio5"; + function = "gpio"; + }; + + pinconf { + pins = "gpio5"; + bias-disable; + drive-strength = <2>; + output-high; + }; + }; + + fp_to_ap_irq_l: fp-to-ap-irq-l { + pinmux { + pins = "gpio4"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio4"; + + /* Has external pullup */ + bias-disable; + }; + }; + + + h1_ap_int_odl: h1-ap-int-odl { + pinmux { + pins = "gpio42"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio42"; + bias-pull-up; + }; + }; + + hp_irq: hp-irq { + pinmux { + pins = "gpio28"; + function = "gpio"; + }; + + pinconf { + pins = "gpio28"; + bias-pull-up; + }; + }; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio52"; + function = "gpio"; + }; + + pinconf { + pins = "gpio52"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_rst_odl: pen-rst-odl { + pinmux { + pins = "gpio18"; + function = "gpio"; + }; + + pinconf { + pins = "gpio18"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; /* TODO: Remove this? */ + }; + }; + + p_sensor_int_l: p-sensor-int-l { + pinmux { + pins = "gpio24"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio24"; + bias-pull-up; + }; + }; + + qup_uart3_sleep: qup-uart3-sleep { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "gpio"; + }; + + pinconf-cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + }; + + pinconf-rts { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + bias-pull-down; + }; + + pinconf-tx { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + bias-pull-up; + }; + + pinconf-rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + bias-pull-up; + }; + }; + + trackpad_int_1v8_odl: trackpad-int-1v8-odl { + pinmux { + pins = "gpio58"; + function = "gpio"; + }; + + pinconf { + pins = "gpio58"; + + /* Has external pullup */ + bias-disable; + }; + }; + + ts_int_l: ts-int-l { + pinmux { + pins = "gpio9"; + function = "gpio"; + }; + + pinconf { + pins = "gpio9"; + bias-pull-up; + }; + }; + + ts_reset_l: ts-reset-l { + pinmux { + pins = "gpio8"; + function = "gpio"; + }; + + pinconf { + pins = "gpio8"; + bias-disable; + drive-strength = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index d46b3833e52f..6678f1e8e395 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,dispcc-sc7180.h> #include <dt-bindings/clock/qcom,gcc-sc7180.h> #include <dt-bindings/clock/qcom,gpucc-sc7180.h> +#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sc7180.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> @@ -132,7 +133,7 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; next-level-cache = <&L2_0>; #cooling-cells = <2>; @@ -158,7 +159,7 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -180,7 +181,7 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -202,7 +203,7 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -224,7 +225,7 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -246,7 +247,7 @@ dynamic-power-coefficient = <100>; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -268,7 +269,7 @@ dynamic-power-coefficient = <405>; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu6_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -290,7 +291,7 @@ dynamic-power-coefficient = <405>; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu6_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -690,6 +691,9 @@ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; clock-names = "core", "iface"; + interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&sdhc1_opp_table>; @@ -710,11 +714,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <100000 100000>; + opp-avg-kBps = <100000 50000>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <600000 900000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -748,7 +756,7 @@ #size-cells = <2>; ranges; iommus = <&apps_smmu 0x43 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>; interconnect-names = "qup-core"; status = "disabled"; @@ -762,9 +770,9 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -782,8 +790,8 @@ #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -798,8 +806,8 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -814,9 +822,9 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -834,8 +842,8 @@ #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -850,8 +858,8 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -866,9 +874,9 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -884,8 +892,8 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -900,9 +908,9 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -920,8 +928,8 @@ #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -936,8 +944,8 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -952,9 +960,9 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -970,8 +978,8 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -986,9 +994,9 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1006,8 +1014,8 @@ #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1022,8 +1030,8 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1039,7 +1047,7 @@ #size-cells = <2>; ranges; iommus = <&apps_smmu 0x4c3 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>; interconnect-names = "qup-core"; status = "disabled"; @@ -1053,9 +1061,9 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1073,8 +1081,8 @@ #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1089,8 +1097,8 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1105,9 +1113,9 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1123,8 +1131,8 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1139,9 +1147,9 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1159,8 +1167,8 @@ #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1175,8 +1183,8 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1191,9 +1199,9 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1209,8 +1217,8 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1225,9 +1233,9 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1245,8 +1253,8 @@ #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1261,8 +1269,8 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1277,9 +1285,9 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1297,8 +1305,8 @@ #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1313,8 +1321,8 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1323,63 +1331,63 @@ config_noc: interconnect@1500000 { compatible = "qcom,sc7180-config-noc"; reg = <0 0x01500000 0 0x28000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sc7180-system-noc"; reg = <0 0x01620000 0 0x17080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@1638000 { compatible = "qcom,sc7180-mc-virt"; reg = <0 0x01638000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; qup_virt: interconnect@1650000 { compatible = "qcom,sc7180-qup-virt"; reg = <0 0x01650000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sc7180-aggre1-noc"; reg = <0 0x016e0000 0 0x15080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1705000 { compatible = "qcom,sc7180-aggre2-noc"; reg = <0 0x01705000 0 0x9000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@170e000 { compatible = "qcom,sc7180-compute-noc"; reg = <0 0x0170e000 0 0x6000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sc7180-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; ipa_virt: interconnect@1e00000 { compatible = "qcom,sc7180-ipa-virt"; reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -1406,9 +1414,9 @@ clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>, - <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; interconnect-names = "memory", "imem", "config"; @@ -1447,6 +1455,19 @@ gpio-ranges = <&tlmm 0 0 120>; wakeup-parent = <&pdc>; + dp_hot_plug_det: dp-hot-plug-det { + pinmux { + pins = "gpio117"; + function = "dp_hot"; + }; + + pinconf { + pins = "gpio117"; + bias-disable; + input-enable; + }; + }; + qspi_clk: qspi-clk { pinmux { pins = "gpio63"; @@ -1886,7 +1907,7 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; - interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; gpu_opp_table: opp-table { @@ -2502,6 +2523,10 @@ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; clock-names = "core", "iface"; + + interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&sdhc2_opp_table>; @@ -2515,11 +2540,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <160000 100000>; + opp-avg-kBps = <80000 50000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <200000 120000>; + opp-avg-kBps = <100000 60000>; }; }; }; @@ -2552,8 +2581,8 @@ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; - interconnects = <&gem_noc MASTER_APPSS_PROC - &config_noc SLAVE_QSPI_0>; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_QSPI_0 0>; interconnect-names = "qspi-config"; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qspi_opp_table>; @@ -2612,13 +2641,13 @@ dc_noc: interconnect@9160000 { compatible = "qcom,sc7180-dc-noc"; reg = <0 0x09160000 0 0x03200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system-cache-controller@9200000 { compatible = "qcom,sc7180-llcc"; - reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -2626,14 +2655,14 @@ gem_noc: interconnect@9680000 { compatible = "qcom,sc7180-gem-noc"; reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; npu_noc: interconnect@9990000 { compatible = "qcom,sc7180-npu-noc"; reg = <0 0x09990000 0 0x1600>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2669,8 +2698,8 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; - interconnects = <&aggre2_noc MASTER_USB3 &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>; + interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_1_dwc3: dwc3@a600000 { @@ -2691,8 +2720,10 @@ reg = <0 0x0aa00000 0 0xff000>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&videocc VENUS_GDSC>, - <&videocc VCODEC0_GDSC>; - power-domain-names = "venus", "vcodec0"; + <&videocc VCODEC0_GDSC>, + <&rpmhpd SC7180_CX>; + power-domain-names = "venus", "vcodec0", "cx"; + operating-points-v2 = <&venus_opp_table>; clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, <&videocc VIDEO_CC_VENUS_AHB_CLK>, <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, @@ -2702,8 +2733,8 @@ "vcodec0_core", "vcodec0_bus"; iommus = <&apps_smmu 0x0c00 0x60>; memory-region = <&venus_mem>; - interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>; + interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; interconnect-names = "video-mem", "cpu-cfg"; video-decoder { @@ -2713,6 +2744,35 @@ video-encoder { compatible = "venus-encoder"; }; + + venus_opp_table: venus-opp-table { + compatible = "operating-points-v2"; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-340000000 { + opp-hz = /bits/ 64 <340000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-434000000 { + opp-hz = /bits/ 64 <434000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-500000097 { + opp-hz = /bits/ 64 <500000097>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; }; videocc: clock-controller@ab00000 { @@ -2728,7 +2788,7 @@ camnoc_virt: interconnect@ac00000 { compatible = "qcom,sc7180-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2740,10 +2800,9 @@ power-domains = <&dispcc MDSS_GDSC>; clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_HF_AXI_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "ahb", "core"; + clock-names = "iface", "ahb", "core"; assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; assigned-clock-rates = <300000000>; @@ -2752,6 +2811,9 @@ interrupt-controller; #interrupt-cells = <1>; + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + iommus = <&apps_smmu 0x800 0x2>; #address-cells = <2>; @@ -2766,12 +2828,13 @@ <0 0x0aeb0000 0 0x2008>; reg-names = "mdp", "vbif"; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, <&dispcc DISP_CC_MDSS_ROT_CLK>, <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>, <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "rot", "lut", "core", + clock-names = "bus", "iface", "rot", "lut", "core", "vsync"; assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, <&dispcc DISP_CC_MDSS_VSYNC_CLK>, @@ -2785,7 +2848,7 @@ power-domains = <&rpmhpd SC7180_CX>; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; status = "disabled"; @@ -2833,7 +2896,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -3312,6 +3375,29 @@ qcom,msa-fixed-perm; status = "disabled"; }; + + lpasscc: clock-controller@62d00000 { + compatible = "qcom,sc7180-lpasscorecc"; + reg = <0 0x62d00000 0 0x50000>, + <0 0x62780000 0 0x30000>; + reg-names = "lpass_core_cc", "lpass_audio_cc"; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpass_hm: clock-controller@63000000 { + compatible = "qcom,sc7180-lpasshm"; + reg = <0 0x63000000 0 0x28>; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; }; thermal-zones { @@ -3320,6 +3406,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 1>; + sustainable-power = <768>; trips { cpu0_alert0: trip-point0 { @@ -3368,6 +3455,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 2>; + sustainable-power = <768>; trips { cpu1_alert0: trip-point0 { @@ -3416,6 +3504,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 3>; + sustainable-power = <768>; trips { cpu2_alert0: trip-point0 { @@ -3464,6 +3553,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 4>; + sustainable-power = <768>; trips { cpu3_alert0: trip-point0 { @@ -3512,6 +3602,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 5>; + sustainable-power = <768>; trips { cpu4_alert0: trip-point0 { @@ -3560,6 +3651,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 6>; + sustainable-power = <768>; trips { cpu5_alert0: trip-point0 { @@ -3608,6 +3700,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 9>; + sustainable-power = <1202>; trips { cpu6_alert0: trip-point0 { @@ -3648,6 +3741,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 10>; + sustainable-power = <1202>; trips { cpu7_alert0: trip-point0 { @@ -3688,6 +3782,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 11>; + sustainable-power = <1202>; trips { cpu8_alert0: trip-point0 { @@ -3728,6 +3823,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 12>; + sustainable-power = <1202>; trips { cpu9_alert0: trip-point0 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index a2a98680ccf5..7cc236575ee2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -451,16 +451,16 @@ port@0 { reg = <0>; - lt9611_out: endpoint { - remote-endpoint = <&hdmi_con>; + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; }; }; - port@1 { - reg = <1>; + port@2 { + reg = <2>; - lt9611_a: endpoint { - remote-endpoint = <&dsi0_out>; + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; }; }; }; @@ -1103,7 +1103,7 @@ }; &cci { - status = "ok"; + status = "okay"; }; &cci_i2c0 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts new file mode 100644 index 000000000000..86cbae63eaf7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -0,0 +1,380 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/* + * Delete following upstream (sdm845.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &tz_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &mpss_region; +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mba_region; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &rmtfs_mem; + +/ { + model = "Xiaomi Pocophone F1"; + compatible = "xiaomi,beryllium", "qcom,sdm845"; + + /* required for bootloader to select correct board */ + qcom,board-id = <69 0>; + qcom,msm-id = <321 0x20001>; + + aliases { + hsuart0 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + /* Reserved memory changes from downstream */ + reserved-memory { + tz_mem: memory@86200000 { + reg = <0 0x86200000 0 0x4900000>; + no-map; + }; + + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x7800000>; + no-map; + }; + + venus_mem: memory@95c00000 { + reg = <0 0x95c00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@96100000 { + reg = <0 0x96100000 0 0x800000>; + no-map; + }; + + mba_region: memory@96900000 { + reg = <0 0x96900000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@96b00000 { + reg = <0 0x96b00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@97f00000 { + reg = <0 0x97f00000 0 0x100000>; + no-map; + }; + + rmtfs_mem: memory@f6301000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6301000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/adsp.mdt"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/cdsp.mdt"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt"; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index eca81cffd2c1..40e8c11f23ab 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -200,7 +200,7 @@ dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_0>; @@ -225,7 +225,7 @@ dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_100>; @@ -247,7 +247,7 @@ dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_200>; @@ -269,7 +269,7 @@ dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_300>; @@ -291,7 +291,7 @@ dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_400>; @@ -313,7 +313,7 @@ dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_500>; @@ -335,7 +335,7 @@ dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_600>; @@ -357,7 +357,7 @@ dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_700>; @@ -2016,49 +2016,49 @@ mem_noc: interconnect@1380000 { compatible = "qcom,sdm845-mem-noc"; reg = <0 0x01380000 0 0x27200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; dc_noc: interconnect@14e0000 { compatible = "qcom,sdm845-dc-noc"; reg = <0 0x014e0000 0 0x400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; config_noc: interconnect@1500000 { compatible = "qcom,sdm845-config-noc"; reg = <0 0x01500000 0 0x5080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sdm845-system-noc"; reg = <0 0x01620000 0 0x18080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sdm845-aggre1-noc"; reg = <0 0x016e0000 0 0x15080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sdm845-aggre2-noc"; reg = <0 0x01700000 0 0x1f300>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sdm845-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2161,9 +2161,9 @@ clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&aggre2_noc MASTER_IPA &mem_noc SLAVE_EBI1>, - <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>, - <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; interconnect-names = "memory", "imem", "config"; @@ -3574,8 +3574,8 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; - interconnects = <&aggre2_noc MASTER_USB3_0 &mem_noc SLAVE_EBI1>, - <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_0>; + interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_1_dwc3: dwc3@a600000 { @@ -3622,8 +3622,8 @@ resets = <&gcc GCC_USB30_SEC_BCR>; - interconnects = <&aggre2_noc MASTER_USB3_1 &mem_noc SLAVE_EBI1>, - <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_1>; + interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_2_dwc3: dwc3@a800000 { @@ -3644,8 +3644,10 @@ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&videocc VENUS_GDSC>, <&videocc VCODEC0_GDSC>, - <&videocc VCODEC1_GDSC>; - power-domain-names = "venus", "vcodec0", "vcodec1"; + <&videocc VCODEC1_GDSC>, + <&rpmhpd SDM845_CX>; + power-domain-names = "venus", "vcodec0", "vcodec1", "cx"; + operating-points-v2 = <&venus_opp_table>; clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, <&videocc VIDEO_CC_VENUS_AHB_CLK>, <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, @@ -3667,6 +3669,40 @@ video-core1 { compatible = "venus-encoder"; }; + + venus_opp_table: venus-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-533000097 { + opp-hz = /bits/ 64 <533000097>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; }; videocc: clock-controller@ab00000 { @@ -3782,6 +3818,10 @@ interrupt-controller; #interrupt-cells = <1>; + interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <&apps_smmu 0x880 0x8>, <&apps_smmu 0xc80 0x8>; @@ -4012,7 +4052,7 @@ qcom,gmu = <&gmu>; - interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>; + interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; gpu_opp_table: opp-table { @@ -4329,7 +4369,7 @@ gladiator_noc: interconnect@17900000 { compatible = "qcom,sdm845-gladiator-noc"; reg = <0 0x17900000 0 0xd080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index b86a7ead3006..f0a872e02686 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -10,6 +10,8 @@ #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> +#include <dt-bindings/clock/qcom,gpucc-sm8150.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/thermal/thermal.h> / { @@ -439,6 +441,55 @@ }; }; + config_noc: interconnect@1500000 { + compatible = "qcom,sm8150-config-noc"; + reg = <0 0x01500000 0 0x7400>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm8150-system-noc"; + reg = <0 0x01620000 0 0x19400>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@163a000 { + compatible = "qcom,sm8150-mc-virt"; + reg = <0 0x0163a000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8150-aggre1-noc"; + reg = <0 0x016e0000 0 0xd080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8150-aggre2-noc"; + reg = <0 0x01700000 0 0x20000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@1720000 { + compatible = "qcom,sm8150-compute-noc"; + reg = <0 0x01720000 0 0x7000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8150-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -507,6 +558,13 @@ }; }; + ipa_virt: interconnect@1e00000 { + compatible = "qcom,sm8150-ipa-virt"; + reg = <0 0x01e00000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -621,15 +679,15 @@ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hfi", "gmu"; - clocks = <&gpucc 0>, - <&gpucc 3>, - <&gpucc 6>, + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, <&gcc GCC_DDRSS_GPU_AXI_CLK>, <&gcc GCC_GPU_MEMNOC_GFX_CLK>; clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; - power-domains = <&gpucc 0>, - <&gpucc 1>; + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; power-domain-names = "cx", "gx"; iommus = <&adreno_smmu 5 0x400>; @@ -674,12 +732,12 @@ <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gpucc 0>, + clocks = <&gpucc GPU_CC_AHB_CLK>, <&gcc GCC_GPU_MEMNOC_GFX_CLK>, <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; clock-names = "ahb", "bus", "iface"; - power-domains = <&gpucc 0>; + power-domains = <&gpucc GPU_CX_GDSC>; }; tlmm: pinctrl@3100000 { @@ -767,7 +825,7 @@ usb_1_hsphy: phy@88e2000 { compatible = "qcom,sm8150-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; + "qcom,usb-snps-hs-7nm-phy"; reg = <0 0x088e2000 0 0x400>; status = "disabled"; #phy-cells = <0>; @@ -813,6 +871,20 @@ }; }; + dc_noc: interconnect@9160000 { + compatible = "qcom,sm8150-dc-noc"; + reg = <0 0x09160000 0 0x3200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sm8150-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -833,7 +905,7 @@ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <150000000>; + assigned-clock-rates = <19200000>, <200000000>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, @@ -857,6 +929,13 @@ }; }; + camnoc_virt: interconnect@ac00000 { + compatible = "qcom,sm8150-camnoc-virt"; + reg = <0 0x0ac00000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x100000>; @@ -1099,6 +1178,20 @@ }; }; }; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + }; + + osm_l3: interconnect@18321000 { + compatible = "qcom,sm8150-osm-l3"; + reg = <0 0x18321000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; }; cpufreq_hw: cpufreq@18323000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 6894f8490dae..fd194ed7fbc8 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -17,7 +17,7 @@ compatible = "qcom,sm8250-mtp"; aliases { - serial0 = &uart2; + serial0 = &uart12; }; chosen { @@ -358,10 +358,38 @@ firmware-name = "qcom/sm8250/cdsp.mbn"; }; +&i2c1 { + status = "okay"; + clock-frequency = <1000000>; + + /* NQ NFC chip @28 */ +}; + +&i2c13 { + status = "okay"; + + /* st,stmfts @ 49 */ +}; + +&i2c15 { + status = "okay"; + + /* smb1390 @ 10 */ + /* rtc6226 @ 64 */ +}; + +&qupv3_id_0 { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; +&qupv3_id_2 { + status = "okay"; +}; + &slpi { status = "okay"; firmware-name = "qcom/sm8250/slpi.mbn"; @@ -371,7 +399,7 @@ gpio-reserved-ranges = <28 4>, <40 4>; }; -&uart2 { +&uart12 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 377172e8967b..d057d85a19fb 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -5,11 +5,14 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> +#include <dt-bindings/clock/qcom,gpucc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -72,7 +75,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32768>; #clock-cells = <0>; }; }; @@ -87,6 +90,8 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -102,6 +107,8 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -114,6 +121,8 @@ reg = <0x0 0x200>; enable-method = "psci"; next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -126,6 +135,8 @@ reg = <0x0 0x300>; enable-method = "psci"; next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -138,6 +149,8 @@ reg = <0x0 0x400>; enable-method = "psci"; next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -150,6 +163,8 @@ reg = <0x0 0x500>; enable-method = "psci"; next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -163,6 +178,8 @@ reg = <0x0 0x600>; enable-method = "psci"; next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -175,6 +192,8 @@ reg = <0x0 0x700>; enable-method = "psci"; next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -393,8 +412,12 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clock-names = "bi_tcxo", "sleep_clk"; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; }; ipcc: mailbox@408000 { @@ -406,6 +429,25 @@ #mbox-cells = <2>; }; + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -440,6 +482,8 @@ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -466,6 +510,8 @@ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -492,6 +538,8 @@ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -518,6 +566,21 @@ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + uart17: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart17_default>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -544,6 +607,21 @@ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + uart18: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart18_default>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -570,6 +648,8 @@ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; @@ -608,6 +688,8 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -634,6 +716,8 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -660,6 +744,21 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -686,6 +785,8 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -712,6 +813,8 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -738,6 +841,8 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -764,6 +869,21 @@ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -790,6 +910,8 @@ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; @@ -828,6 +950,8 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -854,6 +978,8 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -880,6 +1006,8 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -906,6 +1034,8 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -932,15 +1062,21 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; - uart2: serial@a90000 { + uart12: serial@a90000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -967,10 +1103,61 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; + config_noc: interconnect@1500000 { + compatible = "qcom,sm8250-config-noc"; + reg = <0 0x01500000 0 0xa580>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm8250-system-noc"; + reg = <0 0x01620000 0 0x1c200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@163d000 { + compatible = "qcom,sm8250-mc-virt"; + reg = <0 0x0163d000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8250-aggre1-noc"; + reg = <0 0x016e0000 0 0x1f180>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8250-aggre2-noc"; + reg = <0 0x01700000 0 0x33000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@1733000 { + compatible = "qcom,sm8250-compute-noc"; + reg = <0 0x01733000 0 0xa180>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8250-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1041,6 +1228,13 @@ }; }; + ipa_virt: interconnect@1e00000 { + compatible = "qcom,sm8250-ipa-virt"; + reg = <0 0x01e00000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -1127,15 +1321,15 @@ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hfi", "gmu"; - clocks = <&gpucc 0>, - <&gpucc 3>, - <&gpucc 6>, + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, <&gcc GCC_DDRSS_GPU_AXI_CLK>, <&gcc GCC_GPU_MEMNOC_GFX_CLK>; clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; - power-domains = <&gpucc 0>, - <&gpucc 1>; + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; power-domain-names = "cx", "gx"; iommus = <&adreno_smmu 5 0x400>; @@ -1181,12 +1375,12 @@ <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gpucc 0>, + clocks = <&gpucc GPU_CC_AHB_CLK>, <&gcc GCC_GPU_MEMNOC_GFX_CLK>, <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; clock-names = "ahb", "bus", "iface"; - power-domains = <&gpucc 0>; + power-domains = <&gpucc GPU_CX_GDSC>; }; slpi: remoteproc@5c00000 { @@ -1266,6 +1460,27 @@ }; }; + dc_noc: interconnect@90c0000 { + compatible = "qcom,sm8250-dc-noc"; + reg = <0 0x090c0000 0 0x4200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + compatible = "qcom,sm8250-gem-noc"; + reg = <0 0x09100000 0 0xb4000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + npu_noc: interconnect@9990000 { + compatible = "qcom,sm8250-npu-noc"; + reg = <0 0x09990000 0 0x1600>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8250-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -1276,6 +1491,28 @@ interrupt-controller; }; + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8250-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8250-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <9>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: qmp@c300000 { compatible = "qcom,sm8250-aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; @@ -1880,6 +2117,43 @@ bias-disable; }; }; + + qup_uart2_default: qup-uart2-default { + mux { + pins = "gpio117", "gpio118"; + function = "qup2"; + }; + }; + + qup_uart6_default: qup-uart6-default { + mux { + pins = "gpio16", "gpio17", + "gpio18", "gpio19"; + function = "qup6"; + }; + }; + + qup_uart12_default: qup-uart12-default { + mux { + pins = "gpio34", "gpio35"; + function = "qup12"; + }; + }; + + qup_uart17_default: qup-uart17-default { + mux { + pins = "gpio52", "gpio53", + "gpio54", "gpio55"; + function = "qup17"; + }; + }; + + qup_uart18_default: qup-uart18-default { + mux { + pins = "gpio58", "gpio59"; + function = "qup18"; + }; + }; }; adsp: remoteproc@17300000 { @@ -2066,6 +2340,34 @@ }; }; }; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + }; + + epss_l3: interconnect@18591000 { + compatible = "qcom,sm8250-epss-l3"; + reg = <0 0x18590000 0 0x1000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>, + <0 0x18593000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", + "freq-domain2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; }; }; @@ -2080,4 +2382,739 @@ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 15>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + compute-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + compute_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + npu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index d7902294faf3..dffefe030a76 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb +dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb @@ -53,3 +54,5 @@ dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb + +dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 8e80f50132ad..c15f1c571eb0 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -408,7 +408,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a774a1"; reg = <0 0xe6060000 0 0x50c>; }; @@ -2371,6 +2371,44 @@ status = "disabled"; }; + pciec0_ep: pcie-ep@fe000000 { + compatible = "renesas,r8a774a1-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xfe000000 0 0x80000>, + <0x0 0xfe100000 0 0x100000>, + <0x0 0xfe200000 0 0x200000>, + <0x0 0x30000000 0 0x8000000>, + <0x0 0x38000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>; + clock-names = "pcie"; + resets = <&cpg 319>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pciec1_ep: pcie-ep@ee800000 { + compatible = "renesas,r8a774a1-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xee800000 0 0x80000>, + <0x0 0xee900000 0 0x100000>, + <0x0 0xeea00000 0 0x200000>, + <0x0 0xc0000000 0 0x8000000>, + <0x0 0xc8000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + clock-names = "pcie"; + resets = <&cpg 318>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + status = "disabled"; + }; + fdp1@fe940000 { compatible = "renesas,fdp1"; reg = <0 0xfe940000 0 0x2400>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts index a3edd55113df..60d7c8adea02 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts @@ -14,3 +14,8 @@ compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n", "renesas,r8a774b1"; }; + +/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */ +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 49e5addcfd97..39a1a26ffb54 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -282,7 +282,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a774b1"; reg = <0 0xe6060000 0 0x50c>; }; @@ -2240,6 +2240,44 @@ status = "disabled"; }; + pciec0_ep: pcie-ep@fe000000 { + compatible = "renesas,r8a774b1-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xfe000000 0 0x80000>, + <0x0 0xfe100000 0 0x100000>, + <0x0 0xfe200000 0 0x200000>, + <0x0 0x30000000 0 0x8000000>, + <0x0 0x38000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>; + clock-names = "pcie"; + resets = <&cpg 319>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pciec1_ep: pcie-ep@ee800000 { + compatible = "renesas,r8a774b1-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xee800000 0 0x80000>, + <0x0 0xee900000 0 0x100000>, + <0x0 0xeea00000 0 0x200000>, + <0x0 0xc0000000 0 0x8000000>, + <0x0 0xc8000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + clock-names = "pcie"; + resets = <&cpg 318>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + fdp1@fe940000 { compatible = "renesas,fdp1"; reg = <0 0xfe940000 0 0x2400>; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 42171190cce4..f27d9b2eb996 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -256,7 +256,7 @@ resets = <&cpg 906>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a774c0"; reg = <0 0xe6060000 0 0x508>; }; @@ -1214,9 +1214,8 @@ reg = <0 0xe6ea0000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 210>; - dmas = <&dmac1 0x43>, <&dmac1 0x42>, - <&dmac2 0x43>, <&dmac2 0x42>; - dma-names = "tx", "rx", "tx", "rx"; + dmas = <&dmac0 0x43>, <&dmac0 0x42>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 210>; #address-cells = <1>; @@ -1698,6 +1697,25 @@ status = "disabled"; }; + pciec0_ep: pcie-ep@fe000000 { + compatible = "renesas,r8a774c0-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xfe000000 0 0x80000>, + <0x0 0xfe100000 0 0x100000>, + <0x0 0xfe200000 0 0x200000>, + <0x0 0x30000000 0 0x8000000>, + <0x0 0x38000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>; + clock-names = "pcie"; + resets = <&cpg 319>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + status = "disabled"; + }; + vspb0: vsp@fe960000 { compatible = "renesas,vsp2"; reg = <0 0xfe960000 0 0x8000>; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts new file mode 100644 index 000000000000..3b7339127bc0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2H sub board connected + * to an Advantech IDK-1110WR 10.1" LVDS panel + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774e1-hihope-rzg2h-ex.dts" +#include "hihope-rzg2-ex-lvds.dtsi" +#include "rzg2-advantech-idk-1110wr-panel.dtsi" + +&lvds0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts index 265355e0de5f..812995939841 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts +++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts @@ -13,3 +13,8 @@ compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h", "renesas,r8a774e1"; }; + +/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */ +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts index cdbe527e9340..9525d5ed6fce 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts +++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts @@ -24,3 +24,18 @@ reg = <0x5 0x00000000 0x0 0x80000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +&sdhi3 { + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 0f86cfd52425..9cbf963aa068 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -127,6 +127,7 @@ power-domains = <&sysc R8A774E1_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; operating-points-v2 = <&cluster0_opp>; @@ -141,6 +142,7 @@ power-domains = <&sysc R8A774E1_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -154,6 +156,7 @@ power-domains = <&sysc R8A774E1_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -167,6 +170,7 @@ power-domains = <&sysc R8A774E1_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -180,6 +184,7 @@ power-domains = <&sysc R8A774E1_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; @@ -194,6 +199,7 @@ power-domains = <&sysc R8A774E1_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -206,6 +212,7 @@ power-domains = <&sysc R8A774E1_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -218,6 +225,7 @@ power-domains = <&sysc R8A774E1_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -236,6 +244,28 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -427,7 +457,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a774e1"; reg = <0 0xe6060000 0 0x50c>; }; @@ -838,18 +868,61 @@ }; hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774e1", + "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; + }; - /* placeholder */ + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774e1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774e1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; }; usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a774e1-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 328>; #phy-cells = <0>; status = "disabled"; - - /* placeholder */ }; dmac0: dma-controller@e6700000 { @@ -1203,11 +1276,73 @@ }; pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; + }; - /* placeholder */ + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; }; scif0: serial@e6e60000 { @@ -1372,7 +1507,260 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a774e1"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin0>; + }; + }; + }; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a774e1"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin1>; + }; + vin1csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin1>; + }; + }; + }; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a774e1"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin2>; + }; + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a774e1"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin3>; + }; + vin3csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin3>; + }; + }; + }; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a774e1"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a774e1"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin5>; + }; + }; + }; + }; + + vin6: video@e6ef6000 { + compatible = "renesas,vin-r8a774e1"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin6>; + }; + }; + }; + }; + + vin7: video@e6ef7000 { + compatible = "renesas,vin-r8a774e1"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin7>; + }; + }; + }; + }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -1380,71 +1768,569 @@ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774E1_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; status = "disabled"; - /* placeholder */ + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; ssi2: ssi-2 { - /* placeholder */ + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774e1", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>, + <&ipmmu_mp0 2>, <&ipmmu_mp0 3>, + <&ipmmu_mp0 4>, <&ipmmu_mp0 5>, + <&ipmmu_mp0 6>, <&ipmmu_mp0 7>, + <&ipmmu_mp0 8>, <&ipmmu_mp0 9>, + <&ipmmu_mp0 10>, <&ipmmu_mp0 11>, + <&ipmmu_mp0 12>, <&ipmmu_mp0 13>, + <&ipmmu_mp0 14>, <&ipmmu_mp0 15>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a774e1", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>, + <&ipmmu_mp0 18>, <&ipmmu_mp0 19>, + <&ipmmu_mp0 20>, <&ipmmu_mp0 21>, + <&ipmmu_mp0 22>, <&ipmmu_mp0 23>, + <&ipmmu_mp0 24>, <&ipmmu_mp0 25>, + <&ipmmu_mp0 26>, <&ipmmu_mp0 27>, + <&ipmmu_mp0 28>, <&ipmmu_mp0 29>, + <&ipmmu_mp0 30>, <&ipmmu_mp0 31>; + }; + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774e1", + "renesas,rcar-gen3-xhci"; reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 328>; status = "disabled"; - - /* placeholder */ }; usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774e1-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 328>; status = "disabled"; - - /* placeholder */ }; ohci0: usb@ee080000 { + compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; - - /* placeholder */ }; ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 702>; status = "disabled"; - - /* placeholder */ }; ehci0: usb@ee080100 { + compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; - - /* placeholder */ }; ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 702>; status = "disabled"; - - /* placeholder */ }; usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774e1", + "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <1>; status = "disabled"; - - /* placeholder */ }; usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a774e1", + "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + #phy-cells = <1>; status = "disabled"; - - /* placeholder */ }; sdhi0: mmc@ee100000 { @@ -1499,6 +2385,18 @@ status = "disabled"; }; + sata: sata@ee300000 { + compatible = "renesas,sata-r8a774e1", + "renesas,rcar-gen3-sata"; + reg = <0 0xee300000 0 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 815>; + iommus = <&ipmmu_hc 2>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -1517,53 +2415,435 @@ }; pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774e1", + "renesas,pcie-rcar-gen3"; reg = <0 0xfe000000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a774e1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + pciec0_ep: pcie-ep@fe000000 { + compatible = "renesas,r8a774e1-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xfe000000 0 0x80000>, + <0x0 0xfe100000 0 0x100000>, + <0x0 0xfe200000 0 0x200000>, + <0x0 0x30000000 0 0x8000000>, + <0x0 0x38000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>; + clock-names = "pcie"; + resets = <&cpg 319>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pciec1_ep: pcie-ep@ee800000 { + compatible = "renesas,r8a774e1-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xee800000 0 0x80000>, + <0x0 0xee900000 0 0x100000>, + <0x0 0xeea00000 0 0x200000>, + <0x0 0xc0000000 0 0x8000000>, + <0x0 0xc8000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + clock-names = "pcie"; + resets = <&cpg 318>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; status = "disabled"; + }; + + vspbc: vsp@fe920000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 624>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 624>; + + renesas,fcp = <&fcpvb1>; + }; + + vspbd: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + vspi1: vsp@fe9b0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9b0000 0 0x8000>; + interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 630>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 630>; + + renesas,fcp = <&fcpvi1>; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + + fdp1@fe944000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe944000 0 0x2400>; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 118>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 118>; + renesas,fcp = <&fcpf1>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 615>; + }; + + fcpf1: fcp@fe951000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe951000 0 0x200>; + clocks = <&cpg CPG_MOD 614>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 614>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 607>; + }; + + fcpvb1: fcp@fe92f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe92f000 0 0x200>; + clocks = <&cpg CPG_MOD 606>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 606>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 611>; + }; + + fcpvi1: fcp@fe9bf000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9bf000 0 0x200>; + clocks = <&cpg CPG_MOD 610>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + resets = <&cpg 610>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 602>; + }; + + csi20: csi2@fea80000 { + compatible = "renesas,r8a774e1-csi2"; + reg = <0 0xfea80000 0 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; - /* placeholder */ + reg = <1>; + + csi20vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi20>; + }; + csi20vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi20>; + }; + csi20vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi20>; + }; + csi20vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi20>; + }; + csi20vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi20>; + }; + csi20vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi20>; + }; + csi20vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi20>; + }; + csi20vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi20>; + }; + }; + }; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a774e1-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; }; hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a774e1-hdmi", + "renesas,rcar-gen3-hdmi"; reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, + <&cpg CPG_CORE R8A774E1_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 729>; status = "disabled"; - /* placeholder */ - ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; }; port@1 { reg = <1>; }; port@2 { + /* HDMI sound */ reg = <2>; }; }; }; du: display@feb00000 { + compatible = "renesas,du-r8a774e1"; reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.3"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.3"; status = "disabled"; - /* placeholder */ + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; + du_out_rgb: endpoint { + }; }; port@1 { reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; }; port@2 { reg = <2>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a774e1-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 9beb8e76d923..18ce0face72b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -490,7 +490,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7795"; reg = <0 0xe6060000 0 0x50c>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 4dfb7f076787..f379c8d1511d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -459,7 +459,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7796"; reg = <0 0xe6060000 0 0x50c>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts index 2ffc7e31dd58..1e7603365106 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts @@ -29,3 +29,60 @@ reg = <0x6 0x00000000 0x1 0x00000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock6 1>, + <&x21_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; + }; +}; + +&hdmi0_con { + remote-endpoint = <&rcar_dw_hdmi0_out>; +}; + +&rcar_sound { + ports { + /* rsnd_port0 is on salvator-common */ + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + }; +}; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 542c44c7dbca..1ba30313c8b8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -448,7 +448,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a77961"; reg = <0 0xe6060000 0 0x50c>; }; @@ -1228,27 +1228,494 @@ }; rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ - /* placeholder */ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A77961_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { - dvc0: dvc-0 { }; - dvc1: dvc-1 { }; + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; }; rcar_sound,src { - src0: src-0 { }; - src1: src-1 { }; + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; }; rcar_sound,ssi { - ssi0: ssi-0 { }; - ssi1: ssi-1 { }; - ssi2: ssi-2 { }; + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; + }; }; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a77961", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a77961", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>, + <&ipmmu_mp 18>, <&ipmmu_mp 19>, + <&ipmmu_mp 20>, <&ipmmu_mp 21>, + <&ipmmu_mp 22>, <&ipmmu_mp 23>, + <&ipmmu_mp 24>, <&ipmmu_mp 25>, + <&ipmmu_mp 26>, <&ipmmu_mp 27>, + <&ipmmu_mp 28>, <&ipmmu_mp 29>, + <&ipmmu_mp 30>, <&ipmmu_mp 31>; }; xhci0: usb@ee000000 { @@ -1465,6 +1932,113 @@ status = "disabled"; }; + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A77961_PD_A3VC>; + resets = <&cpg 615>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A77961_PD_A3VC>; + resets = <&cpg 607>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A77961_PD_A3VC>; + resets = <&cpg 611>; + iommus = <&ipmmu_vc0 19>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + fcpvd2: fcp@fea37000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea37000 0 0x200>; + clocks = <&cpg CPG_MOD 601>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 601>; + iommus = <&ipmmu_vi0 10>; + }; + + vspb: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A77961_PD_A3VC>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x5000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 621>; + + renesas,fcp = <&fcpvd2>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A77961_PD_A3VC>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + csi20: csi2@fea80000 { reg = <0 0xfea80000 0 0x10000>; /* placeholder */ @@ -1499,14 +2073,23 @@ }; hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a77961-hdmi", "renesas,rcar-gen3-hdmi"; reg = <0 0xfead0000 0 0x10000>; - /* placeholder */ + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A77961_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; }; port@1 { reg = <1>; @@ -1519,8 +2102,19 @@ }; du: display@feb00000 { + compatible = "renesas,du-r8a77961"; reg = <0 0xfeb00000 0 0x70000>; - /* placeholder */ + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.2"; + + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; + status = "disabled"; ports { #address-cells = <1>; @@ -1534,6 +2128,7 @@ port@1 { reg = <1>; du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; }; }; port@2 { diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index fe4dc12e2bdf..c355460e5f7f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -329,7 +329,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a77965"; reg = <0 0xe6060000 0 0x50c>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 2b9124a5ca86..baf8cc821564 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -204,7 +204,7 @@ resets = <&cpg 907>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a77970"; reg = <0 0xe6060000 0 0x504>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 59f5bbd72161..d6cae90d7fd9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -234,7 +234,7 @@ resets = <&cpg 907>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a77980"; reg = <0 0xe6060000 0 0x50c>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 7402cfa8d4e4..e0ccca2222d2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -520,10 +520,8 @@ &pfc { avb_pins: avb { - mux { - groups = "avb_link", "avb_mii"; - function = "avb"; - }; + groups = "avb_link", "avb_mii"; + function = "avb"; }; canfd0_pins: canfd0 { diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 1991bdc36792..33d7e657bd9c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -282,7 +282,7 @@ resets = <&cpg 906>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a77990"; reg = <0 0xe6060000 0 0x508>; }; @@ -1192,9 +1192,8 @@ reg = <0 0xe6ea0000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 210>; - dmas = <&dmac1 0x43>, <&dmac1 0x42>, - <&dmac2 0x43>, <&dmac2 0x42>; - dma-names = "tx", "rx", "tx", "rx"; + dmas = <&dmac0 0x43>, <&dmac0 0x42>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 210>; #address-cells = <1>; @@ -1288,6 +1287,126 @@ }; }; + drif00: rif@e6f40000 { + compatible = "renesas,r8a77990-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f40000 0 0x84>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>; + clock-names = "fck"; + dmas = <&dmac1 0x20>, <&dmac2 0x20>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 515>; + renesas,bonding = <&drif01>; + status = "disabled"; + }; + + drif01: rif@e6f50000 { + compatible = "renesas,r8a77990-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f50000 0 0x84>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>; + clock-names = "fck"; + dmas = <&dmac1 0x22>, <&dmac2 0x22>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 514>; + renesas,bonding = <&drif00>; + status = "disabled"; + }; + + drif10: rif@e6f60000 { + compatible = "renesas,r8a77990-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f60000 0 0x84>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 513>; + clock-names = "fck"; + dmas = <&dmac1 0x24>, <&dmac2 0x24>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 513>; + renesas,bonding = <&drif11>; + status = "disabled"; + }; + + drif11: rif@e6f70000 { + compatible = "renesas,r8a77990-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f70000 0 0x84>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 512>; + clock-names = "fck"; + dmas = <&dmac1 0x26>, <&dmac2 0x26>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 512>; + renesas,bonding = <&drif10>; + status = "disabled"; + }; + + drif20: rif@e6f80000 { + compatible = "renesas,r8a77990-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f80000 0 0x84>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 511>; + clock-names = "fck"; + dmas = <&dmac0 0x28>; + dma-names = "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 511>; + renesas,bonding = <&drif21>; + status = "disabled"; + }; + + drif21: rif@e6f90000 { + compatible = "renesas,r8a77990-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f90000 0 0x84>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 510>; + clock-names = "fck"; + dmas = <&dmac0 0x2a>; + dma-names = "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 510>; + renesas,bonding = <&drif20>; + status = "disabled"; + }; + + drif30: rif@e6fa0000 { + compatible = "renesas,r8a77990-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6fa0000 0 0x84>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 509>; + clock-names = "fck"; + dmas = <&dmac0 0x2c>; + dma-names = "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 509>; + renesas,bonding = <&drif31>; + status = "disabled"; + }; + + drif31: rif@e6fb0000 { + compatible = "renesas,r8a77990-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6fb0000 0 0x84>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 508>; + clock-names = "fck"; + dmas = <&dmac0 0x2e>; + dma-names = "rx"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 508>; + renesas,bonding = <&drif30>; + status = "disabled"; + }; + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 79c73a99d2fe..8f471881b7a3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -393,10 +393,8 @@ &pfc { avb0_pins: avb { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_mii"; - function = "avb0"; - }; + groups = "avb0_link", "avb0_mdio", "avb0_mii"; + function = "avb0"; }; can0_pins: can0 { diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 2c2272f5f5b5..cd7ca9774196 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -188,7 +188,7 @@ resets = <&cpg 906>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a77995"; reg = <0 0xe6060000 0 0x508>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi new file mode 100644 index 000000000000..4ba269a4cec8 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Falcon CPU board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a779a0.dtsi" + +/ { + model = "Renesas Falcon CPU board"; + compatible = "renesas,falcon-cpu", "renesas,r8a779a0"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x80000000>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&scif0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts new file mode 100644 index 000000000000..8eda70e5a82b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Falcon CPU and BreakOut boards + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779a0-falcon-cpu.dtsi" + +/ { + model = "Renesas Falcon CPU and Breakout boards based on r8a779a0"; + compatible = "renesas,falcon-breakout", "renesas,falcon-cpu", "renesas,r8a779a0"; + + aliases { + serial0 = &scif0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi new file mode 100644 index 000000000000..6cf77ce9aa93 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the R-Car V3U (R8A779A0) SoC + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/r8a779a0-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a779a0-sysc.h> + +/ { + compatible = "renesas,r8a779a0"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a76_0: cpu@0 { + compatible = "arm,cortex-a76"; + reg = <0>; + device_type = "cpu"; + power-domains = <&sysc R8A779A0_PD_A1E0D0C0>; + next-level-cache = <&L3_CA76_0>; + }; + + L3_CA76_0: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A779A0_PD_A2E0D0>; + cache-unified; + cache-level = <3>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + pmu_a76 { + compatible = "arm,cortex-a76-pmu"; + interrupts-extended = <&gic GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a779a0-cpg-mssr"; + reg = <0 0xe6150000 0 0x4000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a779a0-rst"; + reg = <0 0xe6160000 0 0x4000>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a779a0-sysc"; + reg = <0 0xe6180000 0 0x4000>; + #power-domain-cells = <1>; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a779a0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + gic: interrupt-controller@f1000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1000000 0 0x20000>, + <0x0 0xf1060000 0 0x110000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index ff88af8e39d3..a2e085db87c5 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -469,6 +469,7 @@ mmc-hs200-1_8v; mmc-hs400-1_8v; non-removable; + full-pwr-cycle-in-suspend; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index b87b1f773083..26661c7b736b 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -2,9 +2,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb @@ -33,7 +35,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb -dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index e8b754d415d8..2560b98771ca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -574,7 +574,7 @@ }; spdif_tx: spdif-tx@ff3a0000 { - compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif"; + compatible = "rockchip,rk3308-spdif", "rockchip,rk3066-spdif"; reg = <0x0 0xff3a0000 0x0 0x1000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>; diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts new file mode 100644 index 000000000000..30c73ef25370 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3328.dtsi" + +/ { + model = "A95X Z2"; + compatible = "zkmagic,a95x-z2", "rockchip,rk3318"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + recovery { + label = "recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <17000>; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cyx_led_pin>; + pinctrl-names = "default"; + + cyx_led: led-0 { + default-state = "on"; + gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_LOW>; + label = "CYX_LED"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + + spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + /* Power tree */ + vccio_1v8: vccio-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vccio_3v3: vccio-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_otg_vbus: otg-vbus-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&otg_vbus_drv>; + pinctrl-names = "default"; + regulator-name = "vcc_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdmmc0m1_pin>; + pinctrl-names = "default"; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vccio_3v3>; + }; + + vdd_arm: vdd-arm { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1400000>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 5000 1>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&analog_sound { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&cpu0_opp_table { + opp-1200000000 { + status = "disabled"; + }; + + opp-1296000000 { + status = "disabled"; + }; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gmac2phy { + assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; + assigned-clock-rate = <50000000>; + assigned-clocks = <&cru SCLK_MAC2PHY>; + clock_in_out = "output"; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_log>; +}; + +&hdmi { + ddc-i2c-scl-high-time-ns = <9625>; + ddc-i2c-scl-low-time-ns = <10000>; + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + pmuio-supply = <&vccio_3v3>; + vccio1-supply = <&vccio_3v3>; + vccio2-supply = <&vccio_1v8>; + vccio3-supply = <&vccio_3v3>; + vccio4-supply = <&vccio_1v8>; + vccio5-supply = <&vccio_3v3>; + vccio6-supply = <&vccio_3v3>; + status = "okay"; +}; + +&pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + cyx_led_pin: cyx-led-pin { + rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin_pull_up: pwm0-pin-pull-up { + rockchip,pins = <2 RK_PA4 1 &pcfg_pull_up>; + }; + }; + + pwm1 { + pwm1_pin_pull_up: pwm1-pin-pull-up { + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc1 { + clk_32k_out: clk-32k-out { + rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pin_pull_up>; + pinctrl-names = "active"; + status = "okay"; +}; + +&pwm1 { + pinctrl-0 = <&pwm1_pin_pull_up>; + pinctrl-names = "active"; + status = "okay"; +}; + +&saradc { + vref-supply = <&vccio_1v8>; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <125000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &clk_32k_out>; + pinctrl-names = "default"; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&spdif { + pinctrl-0 = <&spdifm0_tx>; + status = "okay"; +}; + +&soc_crit { + temperature = <115000>; /* millicelsius */ +}; + +&target { + temperature = <105000>; /* millicelsius */ +}; + +&threshold { + temperature = <90000>; /* millicelsius */ +}; + +&tsadc { + rockchip,hw-tshut-temp = <120000>; + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + phy-supply = <&vcc_otg_vbus>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index 1969dab84138..a48767931af6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -70,6 +70,18 @@ cpu-supply = <&vdd_arm>; }; +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + &emmc { bus-width = <8>; cap-mmc-highspeed; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts new file mode 100644 index 000000000000..be7a31d81632 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 David Bauer <mail@david-bauer.net> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "rk3328.dtsi" + +/ { + model = "FriendlyElec NanoPi R2S"; + compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clk: gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clk"; + #clock-cells = <0>; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&reset_button_pin>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + debounce-interval = <50>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; + pinctrl-names = "default"; + + lan_led: led-0 { + gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + label = "nanopi-r2s:green:lan"; + }; + + sys_led: led-1 { + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + label = "nanopi-r2s:red:sys"; + }; + + wan_led: led-2 { + gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; + label = "nanopi-r2s:green:wan"; + }; + }; + + vcc_io_sdio: sdmmcio-regulator { + compatible = "regulator-gpio"; + enable-active-high; + gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sdio_vcc_pin>; + pinctrl-names = "default"; + regulator-name = "vcc_io_sdio"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-us = <5000>; + regulator-type = "voltage"; + startup-delay-us = <2000>; + states = <1800000 0x1 + 3300000 0x0>; + vin-supply = <&vcc_io_33>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdmmc0m1_pin>; + pinctrl-names = "default"; + regulator-name = "vcc_sd"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io_33>; + }; + + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; + clock_in_out = "input"; + phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io_33>; + pinctrl-0 = <&rgmiim1_pins>; + pinctrl-names = "default"; + rx_delay = <0x18>; + snps,aal; + tx_delay = <0x24>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: ethernet-phy@1 { + reg = <1>; + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio1>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&pmic_int_l>; + pinctrl-names = "default"; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vdd_5v>; + vcc2-supply = <&vdd_5v>; + vcc3-supply = <&vdd_5v>; + vcc4-supply = <&vdd_5v>; + vcc5-supply = <&vcc_io_33>; + vcc6-supply = <&vdd_5v>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io_33: DCDC_REG4 { + regulator-name = "vcc_io_33"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&io_domains { + pmuio-supply = <&vcc_io_33>; + vccio1-supply = <&vcc_io_33>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io_sdio>; + vccio4-supply = <&vcc_18>; + vccio5-supply = <&vcc_io_33>; + vccio6-supply = <&vcc_io_33>; + status = "okay"; +}; + +&pinctrl { + button { + reset_button_pin: reset-button-pin { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ethernet-phy { + eth_phy_reset_pin: eth-phy-reset-pin { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + lan_led_pin: lan-led-pin { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led_pin: sys-led-pin { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sd { + sdio_vcc_pin: sdio-vcc-pin { + rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; + pinctrl-names = "default"; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vcc_io_sdio>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + status = "okay"; + dr_mode = "host"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index 1c52f47c43a6..87fabc64cc39 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -134,7 +134,7 @@ pinctrl-0 = <&rmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index b058ce999e3b..ecce16ecc9c3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -183,7 +183,7 @@ snps,reset-delays-us = <0 10000 1000000>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 236ab0f1b206..2582fa4b90e2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -167,7 +167,7 @@ pinctrl-0 = <&rmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &i2c0 { @@ -198,7 +198,7 @@ }; &io_domains { - status = "ok"; + status = "okay"; audio-supply = <&vcc_io>; gpio30-supply = <&vcc_io>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index e36837c04dc7..635afdd99122 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -138,6 +138,14 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + linux,rc-map-name = "rc-khadas"; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -585,6 +593,12 @@ }; }; + ir { + ir_rx: ir-rx { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { sys_led_pin: sys-led-pin { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; @@ -690,6 +704,16 @@ status = "okay"; }; +&spi1 { + status = "okay"; + + spiflash: flash@0 { + compatible = "winbond,w25q128fw", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + }; +}; + &tcphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts index 2acb3d500fb9..754627d97144 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts @@ -11,6 +11,16 @@ model = "Firefly ROC-RK3399-PC Mezzanine Board"; compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399"; + /* MP8009 PoE PD */ + poe_12v: poe-12v { + compatible = "regulator-fixed"; + regulator-name = "poe_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + vcc3v3_ngff: vcc3v3-ngff { compatible = "regulator-fixed"; regulator-name = "vcc3v3_ngff"; @@ -22,7 +32,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; vcc3v3_pcie: vcc3v3-pcie { @@ -34,10 +44,14 @@ pinctrl-0 = <&vcc3v3_pcie_en>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; }; +&sys_12v { + vin-supply = <&poe_12v>; +}; + &pcie_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index b85ec31cd283..e7a459fa4322 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -110,6 +110,14 @@ regulator-max-microvolt = <5000000>; }; + sys_12v: sys-12v { + compatible = "regulator-fixed"; + regulator-name = "sys_12v"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc_12v>; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -141,7 +149,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; vcca_0v9: vcca-0v9 { @@ -186,7 +194,7 @@ regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; vdd_log: vdd-log { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 60f98a3e19d8..678a336010bf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -11,9 +11,6 @@ #include "rk3399-opp.dtsi" / { - model = "Radxa ROCK Pi 4"; - compatible = "radxa,rockpi4", "rockchip,rk3399"; - chosen { stdout-path = "serial2:1500000n8"; }; @@ -587,17 +584,6 @@ pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake_l>; - }; }; &sdmmc { @@ -666,18 +652,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - }; }; &uart2 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts new file mode 100644 index 000000000000..89f2af5e111d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" + +/ { + model = "Radxa ROCK Pi 4A"; + compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts new file mode 100644 index 000000000000..f0055ce2fda0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" + +/ { + model = "Radxa ROCK Pi 4B"; + compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399"; +}; + +&sdio0 { + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&uart0 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts new file mode 100644 index 000000000000..4c7ebb1c5d2d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Radxa Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" + +/ { + model = "Radxa ROCK Pi 4C"; + compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399"; +}; + +&sdio0 { + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&uart0 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; + +&vcc5v0_host { + gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; +}; + +&vcc5v0_host_en { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; +}; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 05c0bebf65d4..65506f21ba30 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -3,9 +3,11 @@ # Make file to build device tree binaries for boards based on # Texas Instruments Inc processors # -# Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ +# Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ # -dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb -dtb-$(CONFIG_ARCH_K3_J721E_SOC) += k3-j721e-common-proc-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb + +dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 24ef18fe77df..533525229a8d 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -112,7 +112,29 @@ power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; }; - main_pmx0: pinmux@11c000 { + crypto: crypto@4e00000 { + compatible = "ti,am654-sa2ul"; + reg = <0x0 0x4e00000 0x0 0x1200>; + power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>; + status = "okay"; + + dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, + <&main_udmap 0x4001>; + dma-names = "tx", "rx1", "rx2"; + dma-coherent; + + rng: rng@4e10000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x0 0x4e10000 0x0 0x7d>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 136 1>; + }; + }; + + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; reg = <0x0 0x11c000 0x0 0x2e4>; #pinctrl-cells = <1>; @@ -120,7 +142,7 @@ pinctrl-single,function-mask = <0xffffffff>; }; - main_pmx1: pinmux@11c2e8 { + main_pmx1: pinctrl@11c2e8 { compatible = "pinctrl-single"; reg = <0x0 0x11c2e8 0x0 0x24>; #pinctrl-cells = <1>; @@ -283,7 +305,7 @@ no-1-8-v; }; - scm_conf: scm_conf@100000 { + scm_conf: scm-conf@100000 { compatible = "syscon", "simple-mfd"; reg = <0 0x00100000 0 0x1c000>; #address-cells = <1>; @@ -305,12 +327,12 @@ reg = <0x00000210 0x4>; }; - serdes0_clk: serdes_clk@4080 { + serdes0_clk: clock@4080 { compatible = "syscon"; reg = <0x00004080 0x4>; }; - serdes1_clk: serdes_clk@4090 { + serdes1_clk: clock@4090 { compatible = "syscon"; reg = <0x00004090 0x4>; }; @@ -322,12 +344,12 @@ <0x4090 0x3>; /* SERDES1 lane select */ }; - dss_oldi_io_ctrl: dss_oldi_io_ctrl@41E0 { + dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 { compatible = "syscon"; - reg = <0x0000041E0 0x14>; + reg = <0x0000041e0 0x14>; }; - ehrpwm_tbclk: syscon@4140 { + ehrpwm_tbclk: clock@4140 { compatible = "ti,am654-ehrpwm-tbclk", "syscon"; reg = <0x4140 0x18>; #clock-cells = <1>; @@ -423,7 +445,7 @@ ti,interrupt-ranges = <0 392 32>; }; - main_navss { + main-navss { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; @@ -639,7 +661,7 @@ }; }; - main_gpio0: main_gpio0@600000 { + main_gpio0: gpio@600000 { compatible = "ti,am654-gpio", "ti,keystone-gpio"; reg = <0x0 0x600000 0x0 0x100>; gpio-controller; @@ -654,7 +676,7 @@ clock-names = "gpio"; }; - main_gpio1: main_gpio1@601000 { + main_gpio1: gpio@601000 { compatible = "ti,am654-gpio", "ti,keystone-gpio"; reg = <0x0 0x601000 0x0 0x100>; gpio-controller; @@ -682,7 +704,7 @@ ti,syscon-pcie-mode = <&pcie0_mode>; bus-range = <0x0 0xff>; num-viewport = <16>; - max-link-speed = <3>; + max-link-speed = <2>; dma-coherent; interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; msi-map = <0x0 &gic_its 0x0 0x10000>; @@ -696,7 +718,7 @@ ti,syscon-pcie-mode = <&pcie0_mode>; num-ib-windows = <16>; num-ob-windows = <16>; - max-link-speed = <3>; + max-link-speed = <2>; dma-coherent; interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; }; @@ -714,7 +736,7 @@ ti,syscon-pcie-mode = <&pcie1_mode>; bus-range = <0x0 0xff>; num-viewport = <16>; - max-link-speed = <3>; + max-link-speed = <2>; dma-coherent; interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; msi-map = <0x0 &gic_its 0x10000 0x10000>; @@ -728,7 +750,7 @@ ti,syscon-pcie-mode = <&pcie1_mode>; num-ib-windows = <16>; num-ob-windows = <16>; - max-link-speed = <3>; + max-link-speed = <2>; dma-coherent; interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 51ca4b4d4c21..29aaf8dca6f6 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -6,7 +6,7 @@ */ &cbass_mcu { - mcu_conf: scm_conf@40f00000 { + mcu_conf: scm-conf@40f00000 { compatible = "syscon", "simple-mfd"; reg = <0x0 0x40f00000 0x0 0x20000>; #address-cells = <1>; @@ -116,7 +116,7 @@ }; }; - mcu_navss { + mcu-navss { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index a1ffe88d9664..ed42f13e7663 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -39,7 +39,7 @@ reg = <0x43000014 0x4>; }; - wkup_pmx0: pinmux@4301c000 { + wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; reg = <0x4301c000 0x118>; #pinctrl-cells = <1>; @@ -80,7 +80,7 @@ ti,interrupt-ranges = <0 712 16>; }; - wkup_gpio0: wkup_gpio0@42110000 { + wkup_gpio0: gpio@42110000 { compatible = "ti,am654-gpio", "ti,keystone-gpio"; reg = <0x42110000 0x100>; gpio-controller; @@ -95,7 +95,7 @@ clock-names = "gpio"; }; - wkup_vtm0: thermal@42050000 { + wkup_vtm0: temperature-sensor@42050000 { compatible = "ti,am654-vtm"; reg = <0x42050000 0x25c>; power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index 27c0406b10ba..d84c0bc05023 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -61,7 +61,7 @@ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; - cbass_main: interconnect@100000 { + cbass_main: bus@100000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -88,7 +88,7 @@ <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; - cbass_mcu: interconnect@28380000 { + cbass_mcu: bus@28380000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -106,7 +106,7 @@ <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/ <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/ - cbass_wakeup: interconnect@42040000 { + cbass_wakeup: bus@42040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index b8a8a0fcb8af..d12dd89f3405 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -29,7 +29,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; - secure_ddr: secure_ddr@9e800000 { + secure_ddr: secure-ddr@9e800000 { reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ alignment = <0x1000>; no-map; @@ -70,14 +70,14 @@ >; }; - push_button_pins_default: push_button__pins_default { + push_button_pins_default: push-button-pins-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ @@ -93,13 +93,13 @@ >; }; - wkup_pca554_default: wkup_pca554_default { + wkup_pca554_default: wkup-pca554-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ >; }; - mcu_cpsw_pins_default: mcu_cpsw_pins_default { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ @@ -116,7 +116,7 @@ >; }; - mcu_mdio_pins_default: mcu_mdio1_pins_default { + mcu_mdio_pins_default: mcu-mdio1-pins-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ @@ -167,7 +167,7 @@ >; }; - main_mmc1_pins_default: main_mmc1_pins_default { + main_mmc1_pins_default: main-mmc1-pins-default { pinctrl-single,pins = < AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ @@ -180,7 +180,7 @@ >; }; - usb1_pins_default: usb1_pins_default { + usb1_pins_default: usb1-pins-default { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ >; @@ -257,7 +257,7 @@ pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; - ov5640@3c { + ov5640: camera@3c { compatible = "ovti,ov5640"; reg = <0x3c>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi index cdc3d40c3f60..9021c738056b 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi @@ -2,13 +2,13 @@ #include <dt-bindings/thermal/thermal.h> -mpu0_thermal: mpu0_thermal { +mpu0_thermal: mpu0-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <500>; /* milliseconds */ thermal-sensors = <&wkup_vtm0 0>; trips { - mpu0_crit: mpu0_crit { + mpu0_crit: mpu0-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; @@ -16,13 +16,13 @@ mpu0_thermal: mpu0_thermal { }; }; -mpu1_thermal: mpu1_thermal { +mpu1_thermal: mpu1-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <500>; /* milliseconds */ thermal-sensors = <&wkup_vtm0 1>; trips { - mpu1_crit: mpu1_crit { + mpu1_crit: mpu1-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; @@ -30,13 +30,13 @@ mpu1_thermal: mpu1_thermal { }; }; -mcu_thermal: mcu_thermal { +mcu_thermal: mcu-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <500>; /* milliseconds */ thermal-sensors = <&wkup_vtm0 2>; trips { - mcu_crit: mcu_crit { + mcu_crit: mcu-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts new file mode 100644 index 000000000000..ef03e7636b66 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j7200-som-p0.dtsi" +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/mux/ti-serdes.h> + +/ { + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + }; +}; + +&wkup_pmx0 { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ + J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ + J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */ + J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */ + J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */ + J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */ + J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */ + J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ + J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ + J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ + J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio1-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ + J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ + >; + }; +}; + +&main_pmx0 { + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ + J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ + J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */ + J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */ + J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ + J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */ + J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */ + J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */ + J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */ + J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */ + >; + }; + + main_usbss0_pins_default: main-usbss0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ + >; + }; +}; + +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "disabled"; +}; + +&main_uart0 { + /* Shared with ATF on this platform */ + power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; +}; + +&main_uart2 { + /* MAIN UART 2 is used by R5F firmware */ + status = "disabled"; +}; + +&main_uart3 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart4 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart5 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart6 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart7 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart8 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart9 { + /* UART not brought out */ + status = "disabled"; +}; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + exp1: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + exp2: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + exp4: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_sdhci0 { + /* eMMC */ + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci1 { + /* SD card */ + pinctrl-0 = <&main_mmc1_pins_default>; + pinctrl-names = "default"; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&serdes_ln_ctrl { + idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>, + <J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>; +}; + +&usb_serdes_mux { + idle-states = <1>; /* USB0 to SERDES lane 3 */ +}; + +&usbss0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss0_pins_default>; + ti,vbus-divider; + ti,usb2-only; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi new file mode 100644 index 000000000000..72d6496e88dd --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -0,0 +1,449 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J7200 SoC Family Main Domain peripherals + * + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_main { + msmc_ram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x00 0x70000000 0x00 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x70000000 0x100000>; + + atf-sram@0 { + reg = <0x00 0x20000>; + }; + }; + + scm_conf: scm-conf@100000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x00100000 0x00 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00100000 0x1c000>; + + serdes_ln_ctrl: serdes-ln-ctrl@4080 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ + <0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */ + }; + + usb_serdes_mux: mux-controller@4000 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ + }; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01900000 0x00 0x100000>; /* GICR */ + + /* vcpumntirq: virtual CPU interface maintenance interrupt */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <131>; + ti,interrupt-ranges = <8 392 56>; + }; + + main_navss: bus@30000000 { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; + ti,sci-dev-id = <199>; + + main_navss_intr: interrupt-controller1 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <213>; + ti,interrupt-ranges = <0 64 64>, + <64 448 64>, + <128 672 64>; + }; + + main_udmass_inta: msi-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x33d00000 0x00 0x100000>; + interrupt-controller; + #interrupt-cells = <0>; + interrupt-parent = <&main_navss_intr>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <209>; + ti,interrupt-ranges = <0 0 256>; + }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x00 0x3c000000 0x00 0x400000>, + <0x00 0x38000000 0x00 0x400000>, + <0x00 0x31120000 0x00 0x100>, + <0x00 0x33000000 0x00 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <1024>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <211>; + msi-parent = <&main_udmass_inta>; + }; + + main_udmap: dma-controller@31150000 { + compatible = "ti,j721e-navss-main-udmap"; + reg = <0x00 0x31150000 0x00 0x100>, + <0x00 0x34000000 0x00 0x100000>, + <0x00 0x35000000 0x00 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <212>; + ti,ringacc = <&main_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>, /* TX_HCHAN */ + <0x10>; /* TX_UHCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>, /* RX_HCHAN */ + <0x0c>; /* RX_UHCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; + + cpts@310d0000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x310d0000 0x00 0x400>; + reg-names = "cpts"; + clocks = <&k3_clks 201 1>; + clock-names = "cpts"; + interrupts-extended = <&main_navss_intr 391>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + }; + }; + + main_pmx0: pinctrl@11c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x11c000 0x00 0x2b4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 146 2>; + clock-names = "fclk"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 278 2>; + clock-names = "fclk"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 279 2>; + clock-names = "fclk"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 280 2>; + clock-names = "fclk"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 281 2>; + clock-names = "fclk"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 282 2>; + clock-names = "fclk"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 283 2>; + clock-names = "fclk"; + }; + + main_uart7: serial@2870000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02870000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 284 2>; + clock-names = "fclk"; + }; + + main_uart8: serial@2880000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02880000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 285 2>; + clock-names = "fclk"; + }; + + main_uart9: serial@2890000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02890000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 286 2>; + clock-names = "fclk"; + }; + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x2000000 0x00 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 187 1>; + power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>; + }; + + main_i2c1: i2c@2010000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x2010000 0x00 0x100>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 188 1>; + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c2: i2c@2020000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x2020000 0x00 0x100>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 189 1>; + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c3: i2c@2030000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x2030000 0x00 0x100>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 190 1>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c4: i2c@2040000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x2040000 0x00 0x100>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 191 1>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c5: i2c@2050000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x2050000 0x00 0x100>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 192 1>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c6: i2c@2060000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x2060000 0x00 0x100>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 193 1>; + power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>; + }; + + main_sdhci0: mmc@4f80000 { + compatible = "ti,j7200-sdhci-8bit", "ti,j721e-sdhci-8bit"; + reg = <0x00 0x04f80000 0x00 0x260>, <0x00 0x4f88000 0x00 0x134>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 91 3>, <&k3_clks 91 0>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-ddr52 = <0x6>; + ti,otap-del-sel-hs200 = <0x8>; + ti,otap-del-sel-hs400 = <0x0>; + ti,strobe-sel = <0x77>; + ti,trm-icp = <0x8>; + bus-width = <8>; + mmc-ddr-1_8v; + dma-coherent; + }; + + main_sdhci1: mmc@4fb0000 { + compatible = "ti,j7200-sdhci-4bit", "ti,j721e-sdhci-4bit"; + reg = <0x00 0x04fb0000 0x00 0x260>, <0x00 0x4fb8000 0x00 0x134>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 92 2>, <&k3_clks 92 1>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x5>; + ti,otap-del-sel-ddr50 = <0xc>; + no-1-8-v; + dma-coherent; + }; + + usbss0: cdns-usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4104000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 288 12>, <&k3_clks 288 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 288 12>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi new file mode 100644 index 000000000000..eb2a78a53512 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -0,0 +1,273 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals + * + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_mcu_wakeup { + dmsc: dmsc@44083000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + reg-names = "debug_messages"; + reg = <0x00 0x44083000 0x00 0x1000>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + mcu_conf: syscon@40f00000 { + compatible = "syscon", "simple-mfd"; + reg = <0x00 0x40f00000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x40f00000 0x20000>; + + phy_gmii_sel: phy@4040 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4040 0x4>; + #phy-cells = <1>; + }; + }; + + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x00 0x43000014 0x00 0x4>; + }; + + wkup_pmx0: pinctrl@4301c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c000 0x00 0x178>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + mcu_ram: sram@41c00000 { + compatible = "mmio-sram"; + reg = <0x00 0x41c00000 0x00 0x100000>; + ranges = <0x00 0x00 0x41c00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 287 2>; + clock-names = "fclk"; + }; + + mcu_uart0: serial@40a00000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 149 2>; + clock-names = "fclk"; + }; + + wkup_gpio_intr: interrupt-controller2 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <137>; + ti,interrupt-ranges = <16 960 16>; + }; + + mcu_navss: bus@28380000 { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; + dma-coherent; + dma-ranges; + ti,sci-dev-id = <232>; + + mcu_ringacc: ringacc@2b800000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x00 0x2b800000 0x00 0x400000>, + <0x00 0x2b000000 0x00 0x400000>, + <0x00 0x28590000 0x00 0x100>, + <0x00 0x2a500000 0x00 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <286>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <235>; + msi-parent = <&main_udmass_inta>; + }; + + mcu_udmap: dma-controller@285c0000 { + compatible = "ti,j721e-navss-mcu-udmap"; + reg = <0x00 0x285c0000 0x00 0x100>, + <0x00 0x2a800000 0x00 0x40000>, + <0x00 0x2aa00000 0x00 0x40000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <236>; + ti,ringacc = <&mcu_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>; /* TX_HCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>; /* RX_HCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; + }; + + mcu_cpsw: ethernet@46000000 { + compatible = "ti,j721e-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x00 0x46000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>; + dma-coherent; + clocks = <&k3_clks 18 21>; + clock-names = "fck"; + power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&mcu_udmap 0xf000>, + <&mcu_udmap 0xf001>, + <&mcu_udmap 0xf002>, + <&mcu_udmap 0xf003>, + <&mcu_udmap 0xf004>, + <&mcu_udmap 0xf005>, + <&mcu_udmap 0xf006>, + <&mcu_udmap 0xf007>, + <&mcu_udmap 0x7000>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + ti,syscon-efuse = <&mcu_conf 0x200>; + phys = <&phy_gmii_sel 1>; + }; + }; + + davinci_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 18 21>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 18 2>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + + mcu_i2c0: i2c@40b00000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x40b00000 0x00 0x100>; + interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 194 1>; + power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>; + }; + + mcu_i2c1: i2c@40b10000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x40b10000 0x00 0x100>; + interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 195 1>; + power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>; + }; + + wkup_i2c0: i2c@42120000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x00 0x42120000 0x00 0x100>; + interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 197 1>; + power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>; + }; + + fss: syscon@47000000 { + compatible = "syscon", "simple-mfd"; + reg = <0x00 0x47000000 0x00 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hbmc_mux: hbmc-mux { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4 0x2>; /* HBMC select */ + }; + + hbmc: hyperbus@47034000 { + compatible = "ti,am654-hbmc"; + reg = <0x00 0x47034000 0x00 0x100>, + <0x05 0x00000000 0x01 0x0000000>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 0>; + assigned-clocks = <&k3_clks 102 5>; + assigned-clock-rates = <333333333>; + #address-cells = <2>; + #size-cells = <1>; + mux-controls = <&hbmc_mux 0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi new file mode 100644 index 000000000000..6a98ba499bc2 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j7200.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00 0x80000000 0x00 0x80000000>, + <0x08 0x80000000 0x00 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + }; +}; + +&wkup_pmx0 { + mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */ + J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */ + J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */ + J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */ + J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */ + J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */ + J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */ + J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */ + J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */ + J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */ + J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */ + J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */ + J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */ + >; + }; +}; + +&hbmc { + /* OSPI and HBMC are muxed inside FSS, Bootloader will enable + * appropriate node based on board detection + */ + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_hpb0_pins_default>; + ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */ + <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */ + + flash@0,0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x00 0x00 0x4000000>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi new file mode 100644 index 000000000000..66169bcf7c9a --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J7200 SoC Family + * + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +/ { + model = "Texas Instruments K3 J7200 SoC"; + compatible = "ti,j7200"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + serial5 = &main_uart3; + serial6 = &main_uart4; + serial7 = &main_uart5; + serial8 = &main_uart6; + serial9 = &main_uart7; + serial10 = &main_uart8; + serial11 = &main_uart9; + }; + + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a72"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a72_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: bus@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ + <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */ + <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */ + <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */ + + /* MCUSS_WKUP Range */ + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + + cbass_mcu_wakeup: bus@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */ + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-j7200-main.dtsi" +#include "k3-j7200-mcu-wakeup.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 6f7490efc438..52e121155563 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -86,13 +86,13 @@ }; &main_pmx0 { - sw10_button_pins_default: sw10_button_pins_default { + sw10_button_pins_default: sw10-button-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ >; }; - main_mmc1_pins_default: main_mmc1_pins_default { + main_mmc1_pins_default: main-mmc1-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ @@ -106,14 +106,14 @@ >; }; - main_usbss0_pins_default: main_usbss0_pins_default { + main_usbss0_pins_default: main-usbss0-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; - main_usbss1_pins_default: main_usbss1_pins_default { + main_usbss1_pins_default: main-usbss1-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; @@ -153,7 +153,7 @@ >; }; - mcasp10_pins_default: mcasp10_pins_default { + mcasp10_pins_default: mcasp10-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */ J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */ @@ -167,7 +167,7 @@ >; }; - audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default { + audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */ >; @@ -175,7 +175,7 @@ }; &wkup_pmx0 { - sw11_button_pins_default: sw11_button_pins_default { + sw11_button_pins_default: sw11-button-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ >; @@ -194,7 +194,7 @@ >; }; - mcu_cpsw_pins_default: mcu_cpsw_pins_default { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ @@ -211,7 +211,7 @@ >; }; - mcu_mdio_pins_default: mcu_mdio1_pins_default { + mcu_mdio_pins_default: mcu-mdio1-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */ @@ -286,99 +286,6 @@ status = "disabled"; }; -&mailbox0_cluster0 { - interrupts = <436>; - - mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster1 { - interrupts = <432>; - - mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster2 { - interrupts = <428>; - - mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster3 { - interrupts = <424>; - - mbox_c66_0: mbox-c66-0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_c66_1: mbox-c66-1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster4 { - interrupts = <420>; - - mbox_c71_0: mbox-c71-0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; -}; - -&mailbox0_cluster5 { - status = "disabled"; -}; - -&mailbox0_cluster6 { - status = "disabled"; -}; - -&mailbox0_cluster7 { - status = "disabled"; -}; - -&mailbox0_cluster8 { - status = "disabled"; -}; - -&mailbox0_cluster9 { - status = "disabled"; -}; - -&mailbox0_cluster10 { - status = "disabled"; -}; - -&mailbox0_cluster11 { - status = "disabled"; -}; - &main_sdhci0 { /* eMMC */ non-removable; @@ -501,7 +408,7 @@ gpio-controller; #gpio-cells = <2>; - p09 { + p09-hog { /* P11 - MCASP/TRACE_MUX_S0 */ gpio-hog; gpios = <9 GPIO_ACTIVE_HIGH>; @@ -509,7 +416,7 @@ line-name = "MCASP/TRACE_MUX_S0"; }; - p10 { + p10-hog { /* P12 - MCASP/TRACE_MUX_S1 */ gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; @@ -652,3 +559,83 @@ status = "okay"; }; + +&serdes0 { + serdes0_pcie_link: link@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes1 { + serdes1_pcie_link: link@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; + }; +}; + +&serdes2 { + serdes2_pcie_link: link@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz2 1>, <&serdes_wiz2 2>; + }; +}; + +&pcie0_rc { + reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + +&pcie1_rc { + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie2_rc { + reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>; + phys = <&serdes2_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie0_ep { + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; + status = "disabled"; +}; + +&pcie1_ep { + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; + status = "disabled"; +}; + +&pcie2_ep { + phys = <&serdes2_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; + status = "disabled"; +}; + +&pcie3_rc { + status = "disabled"; +}; + +&pcie3_ep { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 63d221aee9bc..e2a96b2c423c 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -28,7 +28,39 @@ #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; - serdes_ln_ctrl: serdes-ln-ctrl@4080 { + pcie0_ctrl: syscon@4070 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00004070 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x4070 0x4070 0x4>; + }; + + pcie1_ctrl: syscon@4074 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00004074 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x4074 0x4074 0x4>; + }; + + pcie2_ctrl: syscon@4078 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00004078 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x4078 0x4078 0x4>; + }; + + pcie3_ctrl: syscon@407c { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x0000407c 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x407c 0x407c 0x4>; + }; + + serdes_ln_ctrl: mux@4080 { compatible = "mmio-mux"; reg = <0x00004080 0x50>; #mux-control-cells = <1>; @@ -87,7 +119,7 @@ ti,interrupt-ranges = <8 392 56>; }; - main_navss { + main-navss { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; @@ -305,7 +337,30 @@ }; }; - main_pmx0: pinmux@11c000 { + main_crypto: crypto@4e00000 { + compatible = "ti,j721e-sa2ul"; + reg = <0x0 0x4e00000 0x0 0x1200>; + power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>; + + status = "okay"; + + dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, + <&main_udmap 0x4001>; + dma-names = "tx", "rx1", "rx2"; + dma-coherent; + + rng: rng@4e10000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x0 0x4e10000 0x0 0x7d>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 264 1>; + }; + }; + + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x0 0x11c000 0x0 0x2b4>; @@ -554,6 +609,204 @@ }; }; + pcie0_rc: pcie@2900000 { + compatible = "ti,j721e-pcie-host"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 239 1>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + vendor-id = <0x104c>; + device-id = <0xb00d>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>, + <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + }; + + pcie0_ep: pcie-ep@2900000 { + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 239 1>; + clock-names = "fck"; + cdns,max-outbound-regions = <16>; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + dma-coherent; + }; + + pcie1_rc: pcie@2910000 { + compatible = "ti,j721e-pcie-host"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&pcie1_ctrl>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 240 1>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + vendor-id = <0x104c>; + device-id = <0xb00d>; + msi-map = <0x0 &gic_its 0x10000 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x18001000 0x0 0x18001000 0x0 0x0010000>, + <0x02000000 0x0 0x18011000 0x0 0x18011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + }; + + pcie1_ep: pcie-ep@2910000 { + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&pcie1_ctrl>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 240 1>; + clock-names = "fck"; + cdns,max-outbound-regions = <16>; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + dma-coherent; + }; + + pcie2_rc: pcie@2920000 { + compatible = "ti,j721e-pcie-host"; + reg = <0x00 0x02920000 0x00 0x1000>, + <0x00 0x02927000 0x00 0x400>, + <0x00 0x0e000000 0x00 0x00800000>, + <0x44 0x00000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&pcie2_ctrl>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 241 1>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + vendor-id = <0x104c>; + device-id = <0xb00d>; + msi-map = <0x0 &gic_its 0x20000 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>, + <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + }; + + pcie2_ep: pcie-ep@2920000 { + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02920000 0x00 0x1000>, + <0x00 0x02927000 0x00 0x400>, + <0x00 0x0e000000 0x00 0x00800000>, + <0x44 0x00000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&pcie2_ctrl>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 241 1>; + clock-names = "fck"; + cdns,max-outbound-regions = <16>; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + dma-coherent; + }; + + pcie3_rc: pcie@2930000 { + compatible = "ti,j721e-pcie-host"; + reg = <0x00 0x02930000 0x00 0x1000>, + <0x00 0x02937000 0x00 0x400>, + <0x00 0x0e800000 0x00 0x00800000>, + <0x44 0x10000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&pcie3_ctrl>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 242 1>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + vendor-id = <0x104c>; + device-id = <0xb00d>; + msi-map = <0x0 &gic_its 0x30000 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>, + <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + }; + + pcie3_ep: pcie-ep@2930000 { + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02930000 0x00 0x1000>, + <0x00 0x02937000 0x00 0x400>, + <0x00 0x0e800000 0x00 0x00800000>, + <0x44 0x10000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&pcie3_ctrl>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 242 1>; + clock-names = "fck"; + cdns,max-outbound-regions = <16>; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + dma-coherent; + #address-cells = <2>; + #size-cells = <2>; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -866,7 +1119,7 @@ no-1-8-v; }; - usbss0: cdns_usb@4104000 { + usbss0: cdns-usb@4104000 { compatible = "ti,j721e-usb"; reg = <0x00 0x4104000 0x00 0x100>; dma-coherent; @@ -896,7 +1149,7 @@ }; }; - usbss1: cdns_usb@4114000 { + usbss1: cdns-usb@4114000 { compatible = "ti,j721e-usb"; reg = <0x00 0x4114000 0x00 0x100>; dma-coherent; @@ -1327,4 +1580,42 @@ assigned-clocks = <&k3_clks 253 1>; assigned-clock-parents = <&k3_clks 253 5>; }; + + c66_0: dsp@4d80800000 { + compatible = "ti,j721e-c66-dsp"; + reg = <0x4d 0x80800000 0x00 0x00048000>, + <0x4d 0x80e00000 0x00 0x00008000>, + <0x4d 0x80f00000 0x00 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <142>; + ti,sci-proc-ids = <0x03 0xff>; + resets = <&k3_reset 142 1>; + firmware-name = "j7-c66_0-fw"; + }; + + c66_1: dsp@4d81800000 { + compatible = "ti,j721e-c66-dsp"; + reg = <0x4d 0x81800000 0x00 0x00048000>, + <0x4d 0x81e00000 0x00 0x00008000>, + <0x4d 0x81f00000 0x00 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <143>; + ti,sci-proc-ids = <0x04 0xff>; + resets = <&k3_reset 143 1>; + firmware-name = "j7-c66_1-fw"; + }; + + c71_0: dsp@64800000 { + compatible = "ti,j721e-c71-dsp"; + reg = <0x00 0x64800000 0x00 0x00080000>, + <0x00 0x64e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <15>; + ti,sci-proc-ids = <0x30 0xff>; + resets = <&k3_reset 15 1>; + firmware-name = "j7-c71_0-fw"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index c4a48e8d420a..e581cb1d87ee 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -53,7 +53,7 @@ reg = <0x0 0x43000014 0x0 0x4>; }; - wkup_pmx0: pinmux@4301c000 { + wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c000 0x00 0x178>; @@ -249,7 +249,7 @@ }; }; - mcu_navss { + mcu-navss { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 8fa3361e5e45..5dc3ba739131 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -25,11 +25,53 @@ alignment = <0x1000>; no-map; }; + + c66_1_dma_memory_region: c66-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + c66_0_memory_region: c66-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + c66_0_dma_memory_region: c66-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + c66_1_memory_region: c66-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a8000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a8100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@aa000000 { + reg = <0x00 0xaa000000 0x00 0x01c00000>; + alignment = <0x1000>; + no-map; + }; }; }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup_i2c0_pins_default { + wkup_i2c0_pins_default: wkup-i2c0-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ @@ -72,3 +114,114 @@ #size-cells = <1>; }; }; + +&mailbox0_cluster0 { + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <432>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + interrupts = <428>; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + interrupts = <424>; + + mbox_c66_0: mbox-c66-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c66_1: mbox-c66-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + interrupts = <420>; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&c66_0 { + mboxes = <&mailbox0_cluster3 &mbox_c66_0>; + memory-region = <&c66_0_dma_memory_region>, + <&c66_0_memory_region>; +}; + +&c66_1 { + mboxes = <&mailbox0_cluster3 &mbox_c66_1>; + memory-region = <&c66_1_dma_memory_region>, + <&c66_1_memory_region>; +}; + +&c71_0 { + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index d035b61e0e16..cc483f7344af 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -120,21 +120,24 @@ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; - cbass_main: interconnect@100000 { + cbass_main: bus@100000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ - <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ - <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01800000>, /* PCIe Core*/ + <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/ <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ + <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */ + <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */ <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */ <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ @@ -155,7 +158,7 @@ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; - cbass_mcu_wakeup: interconnect@28380000 { + cbass_mcu_wakeup: bus@28380000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/toshiba/Makefile b/arch/arm64/boot/dts/toshiba/Makefile new file mode 100644 index 000000000000..8cd460d5b68e --- /dev/null +++ b/arch/arm64/boot/dts/toshiba/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts new file mode 100644 index 000000000000..ed0bf7f13f54 --- /dev/null +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree File for TMPV7708 RM main board + * + * (C) Copyright 2020, Toshiba Corporation. + * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ + +/dts-v1/; + +#include "tmpv7708.dtsi" + +/ { + model = "Toshiba TMPV7708 RM main board"; + compatible = "toshiba,tmpv7708-rm-mbrc", "toshiba,tmpv7708"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 768MB memory */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x30000000>; + }; +}; + +&uart0 { + status = "okay"; + clocks = <&uart_clk>; + clock-names = "apb_pclk"; +}; + +&uart1 { + status = "okay"; + clocks = <&uart_clk>; + clock-names = "apb_pclk"; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi new file mode 100644 index 000000000000..242f25f4e12a --- /dev/null +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Source for the TMPV7708 + * + * (C) Copyright 2018 - 2020, Toshiba Corporation. + * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + * + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x81000000 0x00300000; /* cpu-release-addr */ + +/ { + compatible = "toshiba,tmpv7708"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x81100000>; + reg = <0x00>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x81100000>; + reg = <0x01>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x81100000>; + reg = <0x02>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x81100000>; + reg = <0x03>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x81100000>; + reg = <0x100>; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x81100000>; + reg = <0x101>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x81100000>; + reg = <0x102>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x81100000>; + reg = <0x103>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + uart_clk: uart-clk { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + gic: interrupt-controller@24001000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + reg = <0 0x24001000 0 0x1000>, + <0 0x24002000 0 0x2000>, + <0 0x24004000 0 0x2000>, + <0 0x24006000 0 0x2000>; + }; + + pmux: pmux@24190000 { + compatible = "toshiba,tmpv7708-pinctrl"; + reg = <0 0x24190000 0 0x10000>; + }; + + uart0: serial@28200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0x28200000 0 0x1000>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "disabled"; + }; + + uart1: serial@28201000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0x28201000 0 0x1000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; + }; + + uart2: serial@28202000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0x28202000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; + }; + + uart3: serial@28203000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0x28203000 0 0x1000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; + }; + + i2c0: i2c@28030000 { + compatible = "snps,designware-i2c"; + reg = <0 0x28030000 0 0x1000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@28031000 { + compatible = "snps,designware-i2c"; + reg = <0 0x28031000 0 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@28032000 { + compatible = "snps,designware-i2c"; + reg = <0 0x28032000 0 0x1000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@28033000 { + compatible = "snps,designware-i2c"; + reg = <0 0x28033000 0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@28034000 { + compatible = "snps,designware-i2c"; + reg = <0 0x28034000 0 0x1000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@28035000 { + compatible = "snps,designware-i2c"; + reg = <0 0x28035000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@28036000 { + compatible = "snps,designware-i2c"; + reg = <0 0x28036000 0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@28037000 { + compatible = "snps,designware-i2c"; + reg = <0 0x28037000 0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pins>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@28038000 { + compatible = "snps,designware-i2c"; + reg = <0 0x28038000 0 0x1000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_pins>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@28140000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0 0x28140000 0 0x1000>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@28141000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0 0x28141000 0 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@28142000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0 0x28142000 0 0x1000>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@28143000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0 0x28143000 0 0x1000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@28144000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0 0x28144000 0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@28145000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0 0x28145000 0 0x1000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi5_pins>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@28146000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0 0x28146000 0 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi6_pins>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; +}; + +#include "tmpv7708_pins.dtsi" diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi new file mode 100644 index 000000000000..34de00015a7f --- /dev/null +++ b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +&pmux { + spi0_pins: spi0-pins { + function = "spi0"; + groups = "spi0_grp"; + }; + spi1_pins: spi1-pins { + function = "spi1"; + groups = "spi1_grp"; + }; + spi2_pins: spi2-pins { + function = "spi2"; + groups = "spi2_grp"; + }; + spi3_pins: spi3-pins { + function = "spi3"; + groups = "spi3_grp"; + }; + spi4_pins: spi4-pins { + function = "spi4"; + groups = "spi4_grp"; + }; + spi5_pins: spi5-pins { + function = "spi5"; + groups = "spi5_grp"; + }; + spi6_pins: spi6-pins { + function = "spi6"; + groups = "spi6_grp"; + }; + uart0_pins: uart0-pins { + function = "uart0"; + groups = "uart0_grp"; + }; + uart1_pins: uart1-pins { + function = "uart1"; + groups = "uart1_grp"; + }; + uart2_pins: uart2-pins { + function = "uart2"; + groups = "uart2_grp"; + }; + uart3_pins: uart3-pins { + function = "uart3"; + groups = "uart3_grp"; + }; + i2c0_pins: i2c0-pins { + function = "i2c0"; + groups = "i2c0_grp"; + bias-pull-up; + }; + i2c1_pins: i2c1-pins { + function = "i2c1"; + groups = "i2c1_grp"; + bias-pull-up; + }; + i2c2_pins: i2c2-pins { + function = "i2c2"; + groups = "i2c2_grp"; + bias-pull-up; + }; + i2c3_pins: i2c3-pins { + function = "i2c3"; + groups = "i2c3_grp"; + bias-pull-up; + }; + i2c4_pins: i2c4-pins { + function = "i2c4"; + groups = "i2c4_grp"; + bias-pull-up; + }; + i2c5_pins: i2c5-pins { + function = "i2c5"; + groups = "i2c5_grp"; + bias-pull-up; + }; + i2c6_pins: i2c6-pins { + function = "i2c6"; + groups = "i2c6_grp"; + bias-pull-up; + }; + i2c7_pins: i2c7-pins { + function = "i2c7"; + groups = "i2c7_grp"; + bias-pull-up; + }; + i2c8_pins: i2c8-pins { + function = "i2c8"; + groups = "i2c8_grp"; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index 9868ca15dfc5..c94c3bb67edc 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -10,35 +10,30 @@ #include <dt-bindings/clock/xlnx-zynqmp-clk.h> / { pss_ref_clk: pss_ref_clk { - u-boot,dm-pre-reloc; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <33333333>; }; video_clk: video_clk { - u-boot,dm-pre-reloc; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; }; pss_alt_ref_clk: pss_alt_ref_clk { - u-boot,dm-pre-reloc; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; gt_crx_ref_clk: gt_crx_ref_clk { - u-boot,dm-pre-reloc; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <108000000>; }; aux_ref_clk: aux_ref_clk { - u-boot,dm-pre-reloc; compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index d60110ad8367..68ecd0f7b2f2 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -56,27 +56,27 @@ leds { compatible = "gpio-leds"; - ds2 { + led-ds2 { label = "ds2"; gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds3 { + led-ds3 { label = "ds3"; gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; /* WLAN tx */ default-state = "off"; }; - ds4 { + led-ds4 { label = "ds4"; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0rx"; /* WLAN rx */ default-state = "off"; }; - ds5 { + led-ds5 { label = "ds5"; gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; @@ -186,7 +186,7 @@ compatible = "ti,tps65086"; reg = <0x5e>; interrupt-parent = <&gpio>; - interrupts = <77 GPIO_ACTIVE_LOW>; + interrupts = <77 IRQ_TYPE_LEVEL_LOW>; #gpio-cells = <2>; gpio-controller; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 4f801721564f..f1255f635dfd 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -203,25 +203,25 @@ gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3", "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "", "", "", "", "", "", "", "", ""; - gtr-sel0 { + gtr-sel0-hog { gpio-hog; gpios = <0 0>; output-low; /* PCIE = 0, DP = 1 */ line-name = "sel0"; }; - gtr-sel1 { + gtr-sel1-hog { gpio-hog; gpios = <1 0>; output-high; /* PCIE = 0, DP = 1 */ line-name = "sel1"; }; - gtr-sel2 { + gtr-sel2-hog { gpio-hog; gpios = <2 0>; output-high; /* PCIE = 0, USB0 = 1 */ line-name = "sel2"; }; - gtr-sel3 { + gtr-sel3-hog { gpio-hog; gpios = <3 0>; output-high; /* PCIE = 0, SATA = 1 */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 3ec99f13c259..771f60e0346d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -131,7 +131,6 @@ }; zynqmp_clk: clock-controller { - u-boot,dm-pre-reloc; #clock-cells = <1>; compatible = "xlnx,zynqmp-clk"; clocks = <&pss_ref_clk>, @@ -183,7 +182,7 @@ ranges; }; - amba_apu: amba-apu@0 { + amba_apu: axi@0 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <1>; @@ -202,7 +201,7 @@ }; }; - amba: amba { + amba: axi { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -501,7 +500,7 @@ }; i2c0: i2c@ff020000 { - compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10"; + compatible = "cdns,i2c-r1p14"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 17 4>; @@ -512,7 +511,7 @@ }; i2c1: i2c@ff030000 { - compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10"; + compatible = "cdns,i2c-r1p14"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 18 4>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 6d04b9577b0b..73c4783e1272 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -57,6 +57,7 @@ CONFIG_ARCH_THUNDER=y CONFIG_ARCH_THUNDER2=y CONFIG_ARCH_UNIPHIER=y CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VISCONTI=y CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZX=y CONFIG_ARCH_ZYNQMP=y |