rename io_apic_64.c and io_apic_32.c to io_apic.c

The two files are now line by line equal. (sans a printk)

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

3 files changed, 1 insertions, 3914 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 0d41f0343dc0..7264f9c3af8f 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -61,7 +61,7 @@ obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi.o
-obj-$(CONFIG_X86_IO_APIC)	+= io_apic_$(BITS).o
+obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic.c
index fba6d6ee3480..fba6d6ee3480 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic.c
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
deleted file mode 100644
index 940c4167b325..000000000000
--- a/arch/x86/kernel/io_apic_64.c
+++ /dev/null
@@ -1,3913 +0,0 @@
-/*
- *	Intel IO-APIC support for multi-Pentium hosts.
- *
- *	Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
- *
- *	Many thanks to Stig Venaas for trying out countless experimental
- *	patches and reporting/debugging problems patiently!
- *
- *	(c) 1999, Multiple IO-APIC support, developed by
- *	Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
- *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
- *	further tested and cleaned up by Zach Brown <zab@redhat.com>
- *	and Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
- *					thanks to Eric Gilmore
- *					and Rolf G. Tews
- *					for testing these extensively
- *	Paul Diefenbaugh	:	Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/mc146818rtc.h>
-#include <linux/compiler.h>
-#include <linux/acpi.h>
-#include <linux/module.h>
-#include <linux/sysdev.h>
-#include <linux/msi.h>
-#include <linux/htirq.h>
-#include <linux/freezer.h>
-#include <linux/kthread.h>
-#include <linux/jiffies.h>	/* time_after() */
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-#include <linux/bootmem.h>
-#include <linux/dmar.h>
-
-#include <asm/idle.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/desc.h>
-#include <asm/proto.h>
-#include <asm/acpi.h>
-#include <asm/dma.h>
-#include <asm/timer.h>
-#include <asm/i8259.h>
-#include <asm/nmi.h>
-#include <asm/msidef.h>
-#include <asm/hypertransport.h>
-#include <asm/setup.h>
-#include <asm/irq_remapping.h>
-
-#include <mach_ipi.h>
-#include <mach_apic.h>
-#include <mach_apicdef.h>
-
-#define __apicdebuginit(type) static type __init
-
-/*
- *      Is the SiS APIC rmw bug present ?
- *      -1 = don't know, 0 = no, 1 = yes
- */
-int sis_apic_bug = -1;
-
-static DEFINE_SPINLOCK(ioapic_lock);
-static DEFINE_SPINLOCK(vector_lock);
-
-int first_free_entry;
-/*
- * Rough estimation of how many shared IRQs there are, can
- * be changed anytime.
- */
-int pin_map_size;
-
-/*
- * # of IRQ routing registers
- */
-int nr_ioapic_registers[MAX_IO_APICS];
-
-/* I/O APIC entries */
-struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
-int nr_ioapics;
-
-/* MP IRQ source entries */
-struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* # of MP IRQ source entries */
-int mp_irq_entries;
-
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-int mp_bus_id_to_type[MAX_MP_BUSSES];
-#endif
-
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-
-int skip_ioapic_setup;
-
-static int __init parse_noapic(char *str)
-{
-	/* disable IO-APIC */
-	disable_ioapic_setup();
-	return 0;
-}
-early_param("noapic", parse_noapic);
-
-struct irq_cfg;
-struct irq_pin_list;
-struct irq_cfg {
-	unsigned int irq;
-	struct irq_cfg *next;
-	struct irq_pin_list *irq_2_pin;
-	cpumask_t domain;
-	cpumask_t old_domain;
-	unsigned move_cleanup_count;
-	u8 vector;
-	u8 move_in_progress : 1;
-};
-
-/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
-static struct irq_cfg irq_cfg_legacy[] __initdata = {
-	[0]  = { .irq =  0, .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR,  },
-	[1]  = { .irq =  1, .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR,  },
-	[2]  = { .irq =  2, .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR,  },
-	[3]  = { .irq =  3, .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR,  },
-	[4]  = { .irq =  4, .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR,  },
-	[5]  = { .irq =  5, .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR,  },
-	[6]  = { .irq =  6, .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR,  },
-	[7]  = { .irq =  7, .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR,  },
-	[8]  = { .irq =  8, .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR,  },
-	[9]  = { .irq =  9, .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR,  },
-	[10] = { .irq = 10, .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, },
-	[11] = { .irq = 11, .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, },
-	[12] = { .irq = 12, .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, },
-	[13] = { .irq = 13, .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, },
-	[14] = { .irq = 14, .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, },
-	[15] = { .irq = 15, .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, },
-};
-
-static struct irq_cfg irq_cfg_init = { .irq =  -1U, };
-/* need to be biger than size of irq_cfg_legacy */
-static int nr_irq_cfg = 32;
-
-static int __init parse_nr_irq_cfg(char *arg)
-{
-	if (arg) {
-		nr_irq_cfg = simple_strtoul(arg, NULL, 0);
-		if (nr_irq_cfg < 32)
-			nr_irq_cfg = 32;
-	}
-	return 0;
-}
-
-early_param("nr_irq_cfg", parse_nr_irq_cfg);
-
-static void init_one_irq_cfg(struct irq_cfg *cfg)
-{
-	memcpy(cfg, &irq_cfg_init, sizeof(struct irq_cfg));
-}
-
-static struct irq_cfg *irq_cfgx;
-static struct irq_cfg *irq_cfgx_free;
-static void __init init_work(void *data)
-{
-	struct dyn_array *da = data;
-	struct irq_cfg *cfg;
-	int legacy_count;
-	int i;
-
-	cfg = *da->name;
-
-	memcpy(cfg, irq_cfg_legacy, sizeof(irq_cfg_legacy));
-
-	legacy_count = sizeof(irq_cfg_legacy)/sizeof(irq_cfg_legacy[0]);
-	for (i = legacy_count; i < *da->nr; i++)
-		init_one_irq_cfg(&cfg[i]);
-
-	for (i = 1; i < *da->nr; i++)
-		cfg[i-1].next = &cfg[i];
-
-	irq_cfgx_free = &irq_cfgx[legacy_count];
-	irq_cfgx[legacy_count - 1].next = NULL;
-}
-
-#define for_each_irq_cfg(cfg)		\
-	for (cfg = irq_cfgx; cfg; cfg = cfg->next)
-
-DEFINE_DYN_ARRAY(irq_cfgx, sizeof(struct irq_cfg), nr_irq_cfg, PAGE_SIZE, init_work);
-
-static struct irq_cfg *irq_cfg(unsigned int irq)
-{
-	struct irq_cfg *cfg;
-
-	cfg = irq_cfgx;
-	while (cfg) {
-		if (cfg->irq == irq)
-			return cfg;
-
-		cfg = cfg->next;
-	}
-
-	return NULL;
-}
-
-static struct irq_cfg *irq_cfg_alloc(unsigned int irq)
-{
-	struct irq_cfg *cfg, *cfg_pri;
-	int i;
-	int count = 0;
-
-	cfg_pri = cfg = irq_cfgx;
-	while (cfg) {
-		if (cfg->irq == irq)
-			return cfg;
-
-		cfg_pri = cfg;
-		cfg = cfg->next;
-		count++;
-	}
-
-	if (!irq_cfgx_free) {
-		unsigned long phys;
-		unsigned long total_bytes;
-		/*
-		 *  we run out of pre-allocate ones, allocate more
-		 */
-		printk(KERN_DEBUG "try to get more irq_cfg %d\n", nr_irq_cfg);
-
-		total_bytes = sizeof(struct irq_cfg) * nr_irq_cfg;
-		if (after_bootmem)
-			cfg = kzalloc(total_bytes, GFP_ATOMIC);
-		else
-			cfg = __alloc_bootmem_nopanic(total_bytes, PAGE_SIZE, 0);
-
-		if (!cfg)
-			panic("please boot with nr_irq_cfg= %d\n", count * 2);
-
-		phys = __pa(cfg);
-		printk(KERN_DEBUG "irq_irq ==> [%#lx - %#lx]\n", phys, phys + total_bytes);
-
-		for (i = 0; i < nr_irq_cfg; i++)
-			init_one_irq_cfg(&cfg[i]);
-
-		for (i = 1; i < nr_irq_cfg; i++)
-			cfg[i-1].next = &cfg[i];
-
-		irq_cfgx_free = cfg;
-	}
-
-	cfg = irq_cfgx_free;
-	irq_cfgx_free = irq_cfgx_free->next;
-	cfg->next = NULL;
-	if (cfg_pri)
-		cfg_pri->next = cfg;
-	else
-		irq_cfgx = cfg;
-	cfg->irq = irq;
-	printk(KERN_DEBUG "found new irq_cfg for irq %d\n", cfg->irq);
-#ifdef CONFIG_HAVE_SPARSE_IRQ_DEBUG
-	{
-		/* dump the results */
-		struct irq_cfg *cfg;
-		unsigned long phys;
-		unsigned long bytes = sizeof(struct irq_cfg);
-
-		printk(KERN_DEBUG "=========================== %d\n", irq);
-		printk(KERN_DEBUG "irq_cfg dump after get that for %d\n", irq);
-		for_each_irq_cfg(cfg) {
-			phys = __pa(cfg);
-			printk(KERN_DEBUG "irq_cfg %d ==> [%#lx - %#lx]\n", cfg->irq, phys, phys + bytes);
-		}
-		printk(KERN_DEBUG "===========================\n");
-	}
-#endif
-	return cfg;
-}
-
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
-struct irq_pin_list {
-	int apic, pin;
-	struct irq_pin_list *next;
-};
-
-static struct irq_pin_list *irq_2_pin_head;
-/* fill one page ? */
-static int nr_irq_2_pin = 0x100;
-static struct irq_pin_list *irq_2_pin_ptr;
-static void __init irq_2_pin_init_work(void *data)
-{
-	struct dyn_array *da = data;
-	struct irq_pin_list *pin;
-	int i;
-
-	pin = *da->name;
-
-	for (i = 1; i < *da->nr; i++)
-		pin[i-1].next = &pin[i];
-
-	irq_2_pin_ptr = &pin[0];
-}
-DEFINE_DYN_ARRAY(irq_2_pin_head, sizeof(struct irq_pin_list), nr_irq_2_pin, PAGE_SIZE, irq_2_pin_init_work);
-
-static struct irq_pin_list *get_one_free_irq_2_pin(void)
-{
-	struct irq_pin_list *pin;
-	int i;
-
-	pin = irq_2_pin_ptr;
-
-	if (pin) {
-		irq_2_pin_ptr = pin->next;
-		pin->next = NULL;
-		return pin;
-	}
-
-	/*
-	 *  we run out of pre-allocate ones, allocate more
-	 */
-	printk(KERN_DEBUG "try to get more irq_2_pin %d\n", nr_irq_2_pin);
-
-	if (after_bootmem)
-		pin = kzalloc(sizeof(struct irq_pin_list)*nr_irq_2_pin,
-				 GFP_ATOMIC);
-	else
-		pin = __alloc_bootmem_nopanic(sizeof(struct irq_pin_list) *
-				nr_irq_2_pin, PAGE_SIZE, 0);
-
-	if (!pin)
-		panic("can not get more irq_2_pin\n");
-
-	for (i = 1; i < nr_irq_2_pin; i++)
-		pin[i-1].next = &pin[i];
-
-	irq_2_pin_ptr = pin->next;
-	pin->next = NULL;
-
-	return pin;
-}
-
-struct io_apic {
-	unsigned int index;
-	unsigned int unused[3];
-	unsigned int data;
-};
-
-static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
-{
-	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
-}
-
-static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	return readl(&io_apic->data);
-}
-
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- *
- * Older SiS APIC requires we rewrite the index register
- */
-static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-        if (sis_apic_bug)
-                writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
-#ifdef CONFIG_X86_64
-static bool io_apic_level_ack_pending(unsigned int irq)
-{
-	struct irq_pin_list *entry;
-	unsigned long flags;
-	struct irq_cfg *cfg = irq_cfg(irq);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	entry = cfg->irq_2_pin;
-	for (;;) {
-		unsigned int reg;
-		int pin;
-
-		if (!entry)
-			break;
-		pin = entry->pin;
-		reg = io_apic_read(entry->apic, 0x10 + pin*2);
-		/* Is the remote IRR bit set? */
-		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
-			spin_unlock_irqrestore(&ioapic_lock, flags);
-			return true;
-		}
-		if (!entry->next)
-			break;
-		entry = entry->next;
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return false;
-}
-#endif
-
-union entry_union {
-	struct { u32 w1, w2; };
-	struct IO_APIC_route_entry entry;
-};
-
-static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
-{
-	union entry_union eu;
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
-	eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	return eu.entry;
-}
-
-/*
- * When we write a new IO APIC routing entry, we need to write the high
- * word first! If the mask bit in the low word is clear, we will enable
- * the interrupt, and we need to make sure the entry is fully populated
- * before that happens.
- */
-static void
-__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	union entry_union eu;
-	eu.entry = e;
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-}
-
-static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__ioapic_write_entry(apic, pin, e);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-/*
- * When we mask an IO APIC routing entry, we need to write the low
- * word first, in order to set the mask bit before we change the
- * high bits!
- */
-static void ioapic_mask_entry(int apic, int pin)
-{
-	unsigned long flags;
-	union entry_union eu = { .entry.mask = 1 };
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-#ifdef CONFIG_SMP
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
-	int apic, pin;
-	struct irq_cfg *cfg;
-	struct irq_pin_list *entry;
-
-	cfg = irq_cfg(irq);
-	entry = cfg->irq_2_pin;
-	for (;;) {
-		unsigned int reg;
-
-		if (!entry)
-			break;
-
-		apic = entry->apic;
-		pin = entry->pin;
-#ifdef CONFIG_INTR_REMAP
-		/*
-		 * With interrupt-remapping, destination information comes
-		 * from interrupt-remapping table entry.
-		 */
-		if (!irq_remapped(irq))
-			io_apic_write(apic, 0x11 + pin*2, dest);
-#else
-		io_apic_write(apic, 0x11 + pin*2, dest);
-#endif
-		reg = io_apic_read(apic, 0x10 + pin*2);
-		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
-		reg |= vector;
-		io_apic_modify(apic, 0x10 + pin*2, reg);
-		if (!entry->next)
-			break;
-		entry = entry->next;
-	}
-}
-
-static int assign_irq_vector(int irq, cpumask_t mask);
-
-static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg;
-	unsigned long flags;
-	unsigned int dest;
-	cpumask_t tmp;
-	struct irq_desc *desc;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	cfg = irq_cfg(irq);
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-	/*
-	 * Only the high 8 bits are valid.
-	 */
-	dest = SET_APIC_LOGICAL_ID(dest);
-
-	desc = irq_to_desc(irq);
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__target_IO_APIC_irq(irq, dest, cfg->vector);
-	desc->affinity = mask;
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-#endif /* CONFIG_SMP */
-
-/*
- * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
- * shared ISA-space IRQs, so we have to support them. We are super
- * fast in the common case, and fast for shared ISA-space IRQs.
- */
-static void add_pin_to_irq(unsigned int irq, int apic, int pin)
-{
-	struct irq_cfg *cfg;
-	struct irq_pin_list *entry;
-
-	/* first time to refer irq_cfg, so with new */
-	cfg = irq_cfg_alloc(irq);
-	entry = cfg->irq_2_pin;
-	if (!entry) {
-		entry = get_one_free_irq_2_pin();
-		cfg->irq_2_pin = entry;
-		entry->apic = apic;
-		entry->pin = pin;
-		printk(KERN_DEBUG " 0 add_pin_to_irq: irq %d --> apic %d pin %d\n", irq, apic, pin);
-		return;
-	}
-
-	while (entry->next) {
-		/* not again, please */
-		if (entry->apic == apic && entry->pin == pin)
-			return;
-
-		entry = entry->next;
-	}
-
-	entry->next = get_one_free_irq_2_pin();
-	entry = entry->next;
-	entry->apic = apic;
-	entry->pin = pin;
-	printk(KERN_DEBUG " x add_pin_to_irq: irq %d --> apic %d pin %d\n", irq, apic, pin);
-}
-
-/*
- * Reroute an IRQ to a different pin.
- */
-static void __init replace_pin_at_irq(unsigned int irq,
-				      int oldapic, int oldpin,
-				      int newapic, int newpin)
-{
-	struct irq_cfg *cfg = irq_cfg(irq);
-	struct irq_pin_list *entry = cfg->irq_2_pin;
-	int replaced = 0;
-
-	while (entry) {
-		if (entry->apic == oldapic && entry->pin == oldpin) {
-			entry->apic = newapic;
-			entry->pin = newpin;
-			replaced = 1;
-			/* every one is different, right? */
-			break;
-		}
-		entry = entry->next;
-	}
-
-	/* why? call replace before add? */
-	if (!replaced)
-		add_pin_to_irq(irq, newapic, newpin);
-}
-
-#ifdef CONFIG_X86_64
-/*
- * Synchronize the IO-APIC and the CPU by doing
- * a dummy read from the IO-APIC
- */
-static inline void io_apic_sync(unsigned int apic)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	readl(&io_apic->data);
-}
-
-#define __DO_ACTION(R, ACTION, FINAL)					\
-									\
-{									\
-	int pin;							\
-	struct irq_cfg *cfg;						\
-	struct irq_pin_list *entry;					\
-									\
-	cfg = irq_cfg(irq);						\
-	entry = cfg->irq_2_pin;						\
-	for (;;) {							\
-		unsigned int reg;					\
-		if (!entry)						\
-			break;						\
-		pin = entry->pin;					\
-		reg = io_apic_read(entry->apic, 0x10 + R + pin*2);	\
-		reg ACTION;						\
-		io_apic_modify(entry->apic, 0x10 + R + pin*2, reg);	\
-		FINAL;							\
-		if (!entry->next)					\
-			break;						\
-		entry = entry->next;					\
-	}								\
-}
-
-#define DO_ACTION(name,R,ACTION, FINAL)					\
-									\
-	static void name##_IO_APIC_irq (unsigned int irq)		\
-	__DO_ACTION(R, ACTION, FINAL)
-
-/* mask = 1 */
-DO_ACTION(__mask,	0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic))
-
-/* mask = 0 */
-DO_ACTION(__unmask,	0, &= ~IO_APIC_REDIR_MASKED, )
-
-#else
-
-static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable)
-{
-	struct irq_cfg *cfg;
-	struct irq_pin_list *entry;
-	unsigned int pin, reg;
-
-	cfg = irq_cfg(irq);
-	entry = cfg->irq_2_pin;
-	for (;;) {
-		if (!entry)
-			break;
-		pin = entry->pin;
-		reg = io_apic_read(entry->apic, 0x10 + pin*2);
-		reg &= ~disable;
-		reg |= enable;
-		io_apic_modify(entry->apic, 0x10 + pin*2, reg);
-		if (!entry->next)
-			break;
-		entry = entry->next;
-	}
-}
-
-/* mask = 1 */
-static void __mask_IO_APIC_irq(unsigned int irq)
-{
-	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0);
-}
-
-/* mask = 0 */
-static void __unmask_IO_APIC_irq(unsigned int irq)
-{
-	__modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED);
-}
-
-/* mask = 1, trigger = 0 */
-static void __mask_and_edge_IO_APIC_irq(unsigned int irq)
-{
-	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED,
-				IO_APIC_REDIR_LEVEL_TRIGGER);
-}
-
-/* mask = 0, trigger = 1 */
-static void __unmask_and_level_IO_APIC_irq(unsigned int irq)
-{
-	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER,
-				IO_APIC_REDIR_MASKED);
-}
-
-#endif
-
-static void mask_IO_APIC_irq (unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__mask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void unmask_IO_APIC_irq (unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__unmask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
-{
-	struct IO_APIC_route_entry entry;
-
-	/* Check delivery_mode to be sure we're not clearing an SMI pin */
-	entry = ioapic_read_entry(apic, pin);
-	if (entry.delivery_mode == dest_SMI)
-		return;
-	/*
-	 * Disable it in the IO-APIC irq-routing table:
-	 */
-	ioapic_mask_entry(apic, pin);
-}
-
-static void clear_IO_APIC (void)
-{
-	int apic, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++)
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
-			clear_IO_APIC_pin(apic, pin);
-}
-
-#if !defined(CONFIG_SMP) && defined(CONFIG_X86_32)
-void send_IPI_self(int vector)
-{
-	unsigned int cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-	cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	apic_write(APIC_ICR, cfg);
-}
-#endif /* !CONFIG_SMP && CONFIG_X86_32*/
-
-#ifdef CONFIG_X86_32
-/*
- * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
- * specific CPU-side IRQs.
- */
-
-#define MAX_PIRQS 8
-static int pirq_entries [MAX_PIRQS];
-static int pirqs_enabled;
-
-static int __init ioapic_pirq_setup(char *str)
-{
-	int i, max;
-	int ints[MAX_PIRQS+1];
-
-	get_options(str, ARRAY_SIZE(ints), ints);
-
-	for (i = 0; i < MAX_PIRQS; i++)
-		pirq_entries[i] = -1;
-
-	pirqs_enabled = 1;
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"PIRQ redirection, working around broken MP-BIOS.\n");
-	max = MAX_PIRQS;
-	if (ints[0] < MAX_PIRQS)
-		max = ints[0];
-
-	for (i = 0; i < max; i++) {
-		apic_printk(APIC_VERBOSE, KERN_DEBUG
-				"... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
-		/*
-		 * PIRQs are mapped upside down, usually.
-		 */
-		pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
-	}
-	return 1;
-}
-
-__setup("pirq=", ioapic_pirq_setup);
-#endif /* CONFIG_X86_32 */
-
-#ifdef CONFIG_INTR_REMAP
-/* I/O APIC RTE contents at the OS boot up */
-static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
-
-/*
- * Saves and masks all the unmasked IO-APIC RTE's
- */
-int save_mask_IO_APIC_setup(void)
-{
-	union IO_APIC_reg_01 reg_01;
-	unsigned long flags;
-	int apic, pin;
-
-	/*
-	 * The number of IO-APIC IRQ registers (== #pins):
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(apic, 1);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
-	}
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		early_ioapic_entries[apic] =
-			kzalloc(sizeof(struct IO_APIC_route_entry) *
-				nr_ioapic_registers[apic], GFP_KERNEL);
-		if (!early_ioapic_entries[apic])
-			return -ENOMEM;
-	}
-
-	for (apic = 0; apic < nr_ioapics; apic++)
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			struct IO_APIC_route_entry entry;
-
-			entry = early_ioapic_entries[apic][pin] =
-				ioapic_read_entry(apic, pin);
-			if (!entry.mask) {
-				entry.mask = 1;
-				ioapic_write_entry(apic, pin, entry);
-			}
-		}
-	return 0;
-}
-
-void restore_IO_APIC_setup(void)
-{
-	int apic, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++)
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
-			ioapic_write_entry(apic, pin,
-					   early_ioapic_entries[apic][pin]);
-}
-
-void reinit_intr_remapped_IO_APIC(int intr_remapping)
-{
-	/*
-	 * for now plain restore of previous settings.
-	 * TBD: In the case of OS enabling interrupt-remapping,
-	 * IO-APIC RTE's need to be setup to point to interrupt-remapping
-	 * table entries. for now, do a plain restore, and wait for
-	 * the setup_IO_APIC_irqs() to do proper initialization.
-	 */
-	restore_IO_APIC_setup();
-}
-#endif
-
-/*
- * Find the IRQ entry number of a certain pin.
- */
-static int find_irq_entry(int apic, int pin, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == type &&
-		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
-		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mp_dstirq == pin)
-			return i;
-
-	return -1;
-}
-
-/*
- * Find the pin to which IRQ[irq] (ISA) is connected
- */
-static int __init find_isa_irq_pin(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
-
-			return mp_irqs[i].mp_dstirq;
-	}
-	return -1;
-}
-
-static int __init find_isa_irq_apic(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
-			break;
-	}
-	if (i < mp_irq_entries) {
-		int apic;
-		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
-				return apic;
-		}
-	}
-
-	return -1;
-}
-
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
-	int apic, i, best_guess = -1;
-
-	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
-		bus, slot, pin);
-	if (test_bit(bus, mp_bus_not_pci)) {
-		apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
-		return -1;
-	}
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
-
-		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
-			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
-				break;
-
-		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mp_irqtype &&
-		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
-
-			if (!(apic || IO_APIC_IRQ(irq)))
-				continue;
-
-			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
-				return irq;
-			/*
-			 * Use the first all-but-pin matching entry as a
-			 * best-guess fuzzy result for broken mptables.
-			 */
-			if (best_guess < 0)
-				best_guess = irq;
-		}
-	}
-	return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
-/*
- * EISA Edge/Level control register, ELCR
- */
-static int EISA_ELCR(unsigned int irq)
-{
-	if (irq < 16) {
-		unsigned int port = 0x4d0 + (irq >> 3);
-		return (inb(port) >> (irq & 7)) & 1;
-	}
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"Broken MPtable reports ISA irq %d\n", irq);
-	return 0;
-}
-
-#endif
-
-/* ISA interrupts are always polarity zero edge triggered,
- * when listed as conforming in the MP table. */
-
-#define default_ISA_trigger(idx)	(0)
-#define default_ISA_polarity(idx)	(0)
-
-/* EISA interrupts are always polarity zero and can be edge or level
- * trigger depending on the ELCR value.  If an interrupt is listed as
- * EISA conforming in the MP table, that means its trigger type must
- * be read in from the ELCR */
-
-#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
-#define default_EISA_polarity(idx)	default_ISA_polarity(idx)
-
-/* PCI interrupts are always polarity one level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_PCI_trigger(idx)	(1)
-#define default_PCI_polarity(idx)	(1)
-
-/* MCA interrupts are always polarity zero level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_MCA_trigger(idx)	(1)
-#define default_MCA_polarity(idx)	default_ISA_polarity(idx)
-
-static int MPBIOS_polarity(int idx)
-{
-	int bus = mp_irqs[idx].mp_srcbus;
-	int polarity;
-
-	/*
-	 * Determine IRQ line polarity (high active or low active):
-	 */
-	switch (mp_irqs[idx].mp_irqflag & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent polarity */
-			if (test_bit(bus, mp_bus_not_pci))
-				polarity = default_ISA_polarity(idx);
-			else
-				polarity = default_PCI_polarity(idx);
-			break;
-		case 1: /* high active */
-		{
-			polarity = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-		case 3: /* low active */
-		{
-			polarity = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-	}
-	return polarity;
-}
-
-static int MPBIOS_trigger(int idx)
-{
-	int bus = mp_irqs[idx].mp_srcbus;
-	int trigger;
-
-	/*
-	 * Determine IRQ trigger mode (edge or level sensitive):
-	 */
-	switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent */
-			if (test_bit(bus, mp_bus_not_pci))
-				trigger = default_ISA_trigger(idx);
-			else
-				trigger = default_PCI_trigger(idx);
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
-			switch (mp_bus_id_to_type[bus]) {
-				case MP_BUS_ISA: /* ISA pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_EISA: /* EISA pin */
-				{
-					trigger = default_EISA_trigger(idx);
-					break;
-				}
-				case MP_BUS_PCI: /* PCI pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_MCA: /* MCA pin */
-				{
-					trigger = default_MCA_trigger(idx);
-					break;
-				}
-				default:
-				{
-					printk(KERN_WARNING "broken BIOS!!\n");
-					trigger = 1;
-					break;
-				}
-			}
-#endif
-			break;
-		case 1: /* edge */
-		{
-			trigger = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 1;
-			break;
-		}
-		case 3: /* level */
-		{
-			trigger = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 0;
-			break;
-		}
-	}
-	return trigger;
-}
-
-static inline int irq_polarity(int idx)
-{
-	return MPBIOS_polarity(idx);
-}
-
-static inline int irq_trigger(int idx)
-{
-	return MPBIOS_trigger(idx);
-}
-
-int (*ioapic_renumber_irq)(int ioapic, int irq);
-static int pin_2_irq(int idx, int apic, int pin)
-{
-	int irq, i;
-	int bus = mp_irqs[idx].mp_srcbus;
-
-	/*
-	 * Debugging check, we are in big trouble if this message pops up!
-	 */
-	if (mp_irqs[idx].mp_dstirq != pin)
-		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
-
-	if (test_bit(bus, mp_bus_not_pci)) {
-		irq = mp_irqs[idx].mp_srcbusirq;
-	} else {
-		/*
-		 * PCI IRQs are mapped in order
-		 */
-		i = irq = 0;
-		while (i < apic)
-			irq += nr_ioapic_registers[i++];
-		irq += pin;
-                /*
-                 * For MPS mode, so far only needed by ES7000 platform
-                 */
-                if (ioapic_renumber_irq)
-                        irq = ioapic_renumber_irq(apic, irq);
-	}
-
-#ifdef CONFIG_X86_32
-	/*
-	 * PCI IRQ command line redirection. Yes, limits are hardcoded.
-	 */
-	if ((pin >= 16) && (pin <= 23)) {
-		if (pirq_entries[pin-16] != -1) {
-			if (!pirq_entries[pin-16]) {
-				apic_printk(APIC_VERBOSE, KERN_DEBUG
-						"disabling PIRQ%d\n", pin-16);
-			} else {
-				irq = pirq_entries[pin-16];
-				apic_printk(APIC_VERBOSE, KERN_DEBUG
-						"using PIRQ%d -> IRQ %d\n",
-						pin-16, irq);
-			}
-		}
-	}
-#endif
-
-	return irq;
-}
-
-void lock_vector_lock(void)
-{
-	/* Used to the online set of cpus does not change
-	 * during assign_irq_vector.
-	 */
-	spin_lock(&vector_lock);
-}
-
-void unlock_vector_lock(void)
-{
-	spin_unlock(&vector_lock);
-}
-
-static int __assign_irq_vector(int irq, cpumask_t mask)
-{
-	/*
-	 * NOTE! The local APIC isn't very good at handling
-	 * multiple interrupts at the same interrupt level.
-	 * As the interrupt level is determined by taking the
-	 * vector number and shifting that right by 4, we
-	 * want to spread these out a bit so that they don't
-	 * all fall in the same interrupt level.
-	 *
-	 * Also, we've got to be careful not to trash gate
-	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
-	 */
-	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
-	unsigned int old_vector;
-	int cpu;
-	struct irq_cfg *cfg;
-
-	cfg = irq_cfg(irq);
-
-	/* Only try and allocate irqs on cpus that are present */
-	cpus_and(mask, mask, cpu_online_map);
-
-	if ((cfg->move_in_progress) || cfg->move_cleanup_count)
-		return -EBUSY;
-
-	old_vector = cfg->vector;
-	if (old_vector) {
-		cpumask_t tmp;
-		cpus_and(tmp, cfg->domain, mask);
-		if (!cpus_empty(tmp))
-			return 0;
-	}
-
-	for_each_cpu_mask_nr(cpu, mask) {
-		cpumask_t domain, new_mask;
-		int new_cpu;
-		int vector, offset;
-
-		domain = vector_allocation_domain(cpu);
-		cpus_and(new_mask, domain, cpu_online_map);
-
-		vector = current_vector;
-		offset = current_offset;
-next:
-		vector += 8;
-		if (vector >= first_system_vector) {
-			/* If we run out of vectors on large boxen, must share them. */
-			offset = (offset + 1) % 8;
-			vector = FIRST_DEVICE_VECTOR + offset;
-		}
-		if (unlikely(current_vector == vector))
-			continue;
-#ifdef CONFIG_X86_64
-		if (vector == IA32_SYSCALL_VECTOR)
-			goto next;
-#else
-		if (vector == SYSCALL_VECTOR)
-			goto next;
-#endif
-		for_each_cpu_mask_nr(new_cpu, new_mask)
-			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
-				goto next;
-		/* Found one! */
-		current_vector = vector;
-		current_offset = offset;
-		if (old_vector) {
-			cfg->move_in_progress = 1;
-			cfg->old_domain = cfg->domain;
-		}
-		for_each_cpu_mask_nr(new_cpu, new_mask)
-			per_cpu(vector_irq, new_cpu)[vector] = irq;
-		cfg->vector = vector;
-		cfg->domain = domain;
-		return 0;
-	}
-	return -ENOSPC;
-}
-
-static int assign_irq_vector(int irq, cpumask_t mask)
-{
-	int err;
-	unsigned long flags;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	err = __assign_irq_vector(irq, mask);
-	spin_unlock_irqrestore(&vector_lock, flags);
-	return err;
-}
-
-static void __clear_irq_vector(int irq)
-{
-	struct irq_cfg *cfg;
-	cpumask_t mask;
-	int cpu, vector;
-
-	cfg = irq_cfg(irq);
-	BUG_ON(!cfg->vector);
-
-	vector = cfg->vector;
-	cpus_and(mask, cfg->domain, cpu_online_map);
-	for_each_cpu_mask_nr(cpu, mask)
-		per_cpu(vector_irq, cpu)[vector] = -1;
-
-	cfg->vector = 0;
-	cpus_clear(cfg->domain);
-}
-
-void __setup_vector_irq(int cpu)
-{
-	/* Initialize vector_irq on a new cpu */
-	/* This function must be called with vector_lock held */
-	int irq, vector;
-	struct irq_cfg *cfg;
-
-	/* Mark the inuse vectors */
-	for_each_irq_cfg(cfg) {
-		if (!cpu_isset(cpu, cfg->domain))
-			continue;
-		vector = cfg->vector;
-		irq = cfg->irq;
-		per_cpu(vector_irq, cpu)[vector] = irq;
-	}
-	/* Mark the free vectors */
-	for (vector = 0; vector < NR_VECTORS; ++vector) {
-		irq = per_cpu(vector_irq, cpu)[vector];
-		if (irq < 0)
-			continue;
-
-		cfg = irq_cfg(irq);
-		if (!cpu_isset(cpu, cfg->domain))
-			per_cpu(vector_irq, cpu)[vector] = -1;
-	}
-}
-
-static struct irq_chip ioapic_chip;
-#ifdef CONFIG_INTR_REMAP
-static struct irq_chip ir_ioapic_chip;
-#endif
-
-#define IOAPIC_AUTO     -1
-#define IOAPIC_EDGE     0
-#define IOAPIC_LEVEL    1
-
-#ifdef CONFIG_X86_32
-static inline int IO_APIC_irq_trigger(int irq)
-{
-        int apic, idx, pin;
-
-        for (apic = 0; apic < nr_ioapics; apic++) {
-                for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-                        idx = find_irq_entry(apic, pin, mp_INT);
-                        if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin)))
-                                return irq_trigger(idx);
-                }
-        }
-        /*
-         * nonexistent IRQs are edge default
-         */
-        return 0;
-}
-#else
-static inline int IO_APIC_irq_trigger(int irq)
-{
-	return 1;
-}
-#endif
-
-static void ioapic_register_intr(int irq, unsigned long trigger)
-{
-	struct irq_desc *desc;
-
-	/* first time to use this irq_desc */
-	if (irq < 16)
-		desc = irq_to_desc(irq);
-	else
-		desc = irq_to_desc_alloc(irq);
-
-	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
-	    trigger == IOAPIC_LEVEL)
-		desc->status |= IRQ_LEVEL;
-	else
-		desc->status &= ~IRQ_LEVEL;
-
-#ifdef CONFIG_INTR_REMAP
-	if (irq_remapped(irq)) {
-		desc->status |= IRQ_MOVE_PCNTXT;
-		if (trigger)
-			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
-						      handle_fasteoi_irq,
-						     "fasteoi");
-		else
-			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
-						      handle_edge_irq, "edge");
-		return;
-	}
-#endif
-	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
-	    trigger == IOAPIC_LEVEL)
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					      handle_fasteoi_irq,
-					      "fasteoi");
-	else
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					      handle_edge_irq, "edge");
-}
-
-static int setup_ioapic_entry(int apic, int irq,
-			      struct IO_APIC_route_entry *entry,
-			      unsigned int destination, int trigger,
-			      int polarity, int vector)
-{
-	/*
-	 * add it to the IO-APIC irq-routing table:
-	 */
-	memset(entry,0,sizeof(*entry));
-
-#ifdef CONFIG_INTR_REMAP
-	if (intr_remapping_enabled) {
-		struct intel_iommu *iommu = map_ioapic_to_ir(apic);
-		struct irte irte;
-		struct IR_IO_APIC_route_entry *ir_entry =
-			(struct IR_IO_APIC_route_entry *) entry;
-		int index;
-
-		if (!iommu)
-			panic("No mapping iommu for ioapic %d\n", apic);
-
-		index = alloc_irte(iommu, irq, 1);
-		if (index < 0)
-			panic("Failed to allocate IRTE for ioapic %d\n", apic);
-
-		memset(&irte, 0, sizeof(irte));
-
-		irte.present = 1;
-		irte.dst_mode = INT_DEST_MODE;
-		irte.trigger_mode = trigger;
-		irte.dlvry_mode = INT_DELIVERY_MODE;
-		irte.vector = vector;
-		irte.dest_id = IRTE_DEST(destination);
-
-		modify_irte(irq, &irte);
-
-		ir_entry->index2 = (index >> 15) & 0x1;
-		ir_entry->zero = 0;
-		ir_entry->format = 1;
-		ir_entry->index = (index & 0x7fff);
-	} else
-#endif
-	{
-		entry->delivery_mode = INT_DELIVERY_MODE;
-		entry->dest_mode = INT_DEST_MODE;
-		entry->dest = destination;
-	}
-
-	entry->mask = 0;				/* enable IRQ */
-	entry->trigger = trigger;
-	entry->polarity = polarity;
-	entry->vector = vector;
-
-	/* Mask level triggered irqs.
-	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
-	 */
-	if (trigger)
-		entry->mask = 1;
-	return 0;
-}
-
-static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
-			      int trigger, int polarity)
-{
-	struct irq_cfg *cfg;
-	struct IO_APIC_route_entry entry;
-	cpumask_t mask;
-
-	if (!IO_APIC_IRQ(irq))
-		return;
-
-	cfg = irq_cfg(irq);
-
-	mask = TARGET_CPUS;
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(mask, cfg->domain, mask);
-
-	apic_printk(APIC_VERBOSE,KERN_DEBUG
-		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
-		    "IRQ %d Mode:%i Active:%i)\n",
-		    apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
-		    irq, trigger, polarity);
-
-
-	if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry,
-			       cpu_mask_to_apicid(mask), trigger, polarity,
-			       cfg->vector)) {
-		printk("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
-		       mp_ioapics[apic].mp_apicid, pin);
-		__clear_irq_vector(irq);
-		return;
-	}
-
-	ioapic_register_intr(irq, trigger);
-	if (irq < 16)
-		disable_8259A_irq(irq);
-
-	ioapic_write_entry(apic, pin, entry);
-}
-
-static void __init setup_IO_APIC_irqs(void)
-{
-	int apic, pin, idx, irq, first_notcon = 1;
-
-	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-	for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-
-		idx = find_irq_entry(apic,pin,mp_INT);
-		if (idx == -1) {
-			if (first_notcon) {
-				apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin);
-				first_notcon = 0;
-			} else
-				apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin);
-			continue;
-		}
-		if (!first_notcon) {
-			apic_printk(APIC_VERBOSE, " not connected.\n");
-			first_notcon = 1;
-		}
-
-		irq = pin_2_irq(idx, apic, pin);
-#ifdef CONFIG_X86_32
-                if (multi_timer_check(apic, irq))
-                        continue;
-#endif
-		add_pin_to_irq(irq, apic, pin);
-
-		setup_IO_APIC_irq(apic, pin, irq,
-				  irq_trigger(idx), irq_polarity(idx));
-	}
-	}
-
-	if (!first_notcon)
-		apic_printk(APIC_VERBOSE, " not connected.\n");
-}
-
-/*
- * Set up the timer pin, possibly with the 8259A-master behind.
- */
-static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
-					int vector)
-{
-	struct IO_APIC_route_entry entry;
-
-#ifdef CONFIG_INTR_REMAP
-	if (intr_remapping_enabled)
-		return;
-#endif
-
-	memset(&entry, 0, sizeof(entry));
-
-	/*
-	 * We use logical delivery to get the timer IRQ
-	 * to the first CPU.
-	 */
-	entry.dest_mode = INT_DEST_MODE;
-	entry.mask = 1;					/* mask IRQ now */
-	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.delivery_mode = INT_DELIVERY_MODE;
-	entry.polarity = 0;
-	entry.trigger = 0;
-	entry.vector = vector;
-
-	/*
-	 * The timer IRQ doesn't have to know that behind the
-	 * scene we may have a 8259A-master in AEOI mode ...
-	 */
-	set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
-
-	/*
-	 * Add it to the IO-APIC irq-routing table:
-	 */
-	ioapic_write_entry(apic, pin, entry);
-}
-
-
-__apicdebuginit(void) print_IO_APIC(void)
-{
-	int apic, i;
-	union IO_APIC_reg_00 reg_00;
-	union IO_APIC_reg_01 reg_01;
-	union IO_APIC_reg_02 reg_02;
-	union IO_APIC_reg_03 reg_03;
-	unsigned long flags;
-	struct irq_cfg *cfg;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
-	for (i = 0; i < nr_ioapics; i++)
-		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
-
-	/*
-	 * We are a bit conservative about what we expect.  We have to
-	 * know about every hardware change ASAP.
-	 */
-	printk(KERN_INFO "testing the IO APIC.......................\n");
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(apic, 0);
-	reg_01.raw = io_apic_read(apic, 1);
-	if (reg_01.bits.version >= 0x10)
-		reg_02.raw = io_apic_read(apic, 2);
-        if (reg_01.bits.version >= 0x20)
-                reg_03.raw = io_apic_read(apic, 3);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	printk("\n");
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
-	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
-	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
-	printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
-	printk(KERN_DEBUG ".......    : LTS          : %X\n", reg_00.bits.LTS);
-
-	printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
-	printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
-
-	printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
-	printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
-
-	/*
-	 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
-	 * but the value of reg_02 is read as the previous read register
-	 * value, so ignore it if reg_02 == reg_01.
-	 */
-	if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
-		printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
-		printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
-	}
-
-	/*
-	 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
-	 * or reg_03, but the value of reg_0[23] is read as the previous read
-	 * register value, so ignore it if reg_03 == reg_0[12].
-	 */
-	if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
-	    reg_03.raw != reg_01.raw) {
-		printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
-		printk(KERN_DEBUG ".......     : Boot DT    : %X\n", reg_03.bits.boot_DT);
-	}
-
-	printk(KERN_DEBUG ".... IRQ redirection table:\n");
-
-	printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
-			  " Stat Dmod Deli Vect:   \n");
-
-	for (i = 0; i <= reg_01.bits.entries; i++) {
-		struct IO_APIC_route_entry entry;
-
-		entry = ioapic_read_entry(apic, i);
-
-		printk(KERN_DEBUG " %02x %03X ",
-			i,
-			entry.dest
-		);
-
-		printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
-			entry.mask,
-			entry.trigger,
-			entry.irr,
-			entry.polarity,
-			entry.delivery_status,
-			entry.dest_mode,
-			entry.delivery_mode,
-			entry.vector
-		);
-	}
-	}
-	printk(KERN_DEBUG "IRQ to pin mappings:\n");
-	for_each_irq_cfg(cfg) {
-		struct irq_pin_list *entry = cfg->irq_2_pin;
-		if (!entry)
-			continue;
-		printk(KERN_DEBUG "IRQ%d ", cfg->irq);
-		for (;;) {
-			printk("-> %d:%d", entry->apic, entry->pin);
-			if (!entry->next)
-				break;
-			entry = entry->next;
-		}
-		printk("\n");
-	}
-
-	printk(KERN_INFO ".................................... done.\n");
-
-	return;
-}
-
-__apicdebuginit(void) print_APIC_bitfield(int base)
-{
-	unsigned int v;
-	int i, j;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
-	for (i = 0; i < 8; i++) {
-		v = apic_read(base + i*0x10);
-		for (j = 0; j < 32; j++) {
-			if (v & (1<<j))
-				printk("1");
-			else
-				printk("0");
-		}
-		printk("\n");
-	}
-}
-
-__apicdebuginit(void) print_local_APIC(void *dummy)
-{
-	unsigned int v, ver, maxlvt;
-	u64 icr;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
-		smp_processor_id(), hard_smp_processor_id());
-	v = apic_read(APIC_ID);
-	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
-	v = apic_read(APIC_LVR);
-	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
-	ver = GET_APIC_VERSION(v);
-	maxlvt = lapic_get_maxlvt();
-
-	v = apic_read(APIC_TASKPRI);
-	printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
-
-	if (APIC_INTEGRATED(ver)) {                     /* !82489DX */
-		v = apic_read(APIC_ARBPRI);
-		printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
-			v & APIC_ARBPRI_MASK);
-		v = apic_read(APIC_PROCPRI);
-		printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
-	}
-
-	v = apic_read(APIC_EOI);
-	printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
-	v = apic_read(APIC_RRR);
-	printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
-	v = apic_read(APIC_LDR);
-	printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
-	v = apic_read(APIC_DFR);
-	printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
-	v = apic_read(APIC_SPIV);
-	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
-
-	printk(KERN_DEBUG "... APIC ISR field:\n");
-	print_APIC_bitfield(APIC_ISR);
-	printk(KERN_DEBUG "... APIC TMR field:\n");
-	print_APIC_bitfield(APIC_TMR);
-	printk(KERN_DEBUG "... APIC IRR field:\n");
-	print_APIC_bitfield(APIC_IRR);
-
-	if (APIC_INTEGRATED(ver)) {             /* !82489DX */
-		if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
-			apic_write(APIC_ESR, 0);
-
-		v = apic_read(APIC_ESR);
-		printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
-	}
-
-	icr = apic_icr_read();
-	printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr);
-	printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32));
-
-	v = apic_read(APIC_LVTT);
-	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
-
-	if (maxlvt > 3) {                       /* PC is LVT#4. */
-		v = apic_read(APIC_LVTPC);
-		printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
-	}
-	v = apic_read(APIC_LVT0);
-	printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
-	v = apic_read(APIC_LVT1);
-	printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
-
-	if (maxlvt > 2) {			/* ERR is LVT#3. */
-		v = apic_read(APIC_LVTERR);
-		printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
-	}
-
-	v = apic_read(APIC_TMICT);
-	printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
-	v = apic_read(APIC_TMCCT);
-	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
-	v = apic_read(APIC_TDCR);
-	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
-	printk("\n");
-}
-
-__apicdebuginit(void) print_all_local_APICs(void)
-{
-	on_each_cpu(print_local_APIC, NULL, 1);
-}
-
-__apicdebuginit(void) print_PIC(void)
-{
-	unsigned int v;
-	unsigned long flags;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "\nprinting PIC contents\n");
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	v = inb(0xa1) << 8 | inb(0x21);
-	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
-
-	v = inb(0xa0) << 8 | inb(0x20);
-	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
-
-	outb(0x0b,0xa0);
-	outb(0x0b,0x20);
-	v = inb(0xa0) << 8 | inb(0x20);
-	outb(0x0a,0xa0);
-	outb(0x0a,0x20);
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
-
-	v = inb(0x4d1) << 8 | inb(0x4d0);
-	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
-}
-
-__apicdebuginit(int) print_all_ICs(void)
-{
-	print_PIC();
-	print_all_local_APICs();
-	print_IO_APIC();
-
-	return 0;
-}
-
-fs_initcall(print_all_ICs);
-
-
-/* Where if anywhere is the i8259 connect in external int mode */
-static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
-
-void __init enable_IO_APIC(void)
-{
-	union IO_APIC_reg_01 reg_01;
-	int i8259_apic, i8259_pin;
-	int apic;
-	unsigned long flags;
-
-#ifdef CONFIG_X86_32
-	int i;
-	if (!pirqs_enabled)
-		for (i = 0; i < MAX_PIRQS; i++)
-			pirq_entries[i] = -1;
-#endif
-
-	/*
-	 * The number of IO-APIC IRQ registers (== #pins):
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(apic, 1);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
-	}
-	for(apic = 0; apic < nr_ioapics; apic++) {
-		int pin;
-		/* See if any of the pins is in ExtINT mode */
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			struct IO_APIC_route_entry entry;
-			entry = ioapic_read_entry(apic, pin);
-
-			/* If the interrupt line is enabled and in ExtInt mode
-			 * I have found the pin where the i8259 is connected.
-			 */
-			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
-				ioapic_i8259.apic = apic;
-				ioapic_i8259.pin  = pin;
-				goto found_i8259;
-			}
-		}
-	}
- found_i8259:
-	/* Look to see what if the MP table has reported the ExtINT */
-	/* If we could not find the appropriate pin by looking at the ioapic
-	 * the i8259 probably is not connected the ioapic but give the
-	 * mptable a chance anyway.
-	 */
-	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
-	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
-	/* Trust the MP table if nothing is setup in the hardware */
-	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
-		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
-		ioapic_i8259.pin  = i8259_pin;
-		ioapic_i8259.apic = i8259_apic;
-	}
-	/* Complain if the MP table and the hardware disagree */
-	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
-		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
-	{
-		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
-	}
-
-	/*
-	 * Do not trust the IO-APIC being empty at bootup
-	 */
-	clear_IO_APIC();
-}
-
-/*
- * Not an __init, needed by the reboot code
- */
-void disable_IO_APIC(void)
-{
-	/*
-	 * Clear the IO-APIC before rebooting:
-	 */
-	clear_IO_APIC();
-
-	/*
-	 * If the i8259 is routed through an IOAPIC
-	 * Put that IOAPIC in virtual wire mode
-	 * so legacy interrupts can be delivered.
-	 */
-	if (ioapic_i8259.pin != -1) {
-		struct IO_APIC_route_entry entry;
-
-		memset(&entry, 0, sizeof(entry));
-		entry.mask            = 0; /* Enabled */
-		entry.trigger         = 0; /* Edge */
-		entry.irr             = 0;
-		entry.polarity        = 0; /* High */
-		entry.delivery_status = 0;
-		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
-		entry.vector          = 0;
-		entry.dest            = read_apic_id();
-
-		/*
-		 * Add it to the IO-APIC irq-routing table:
-		 */
-		ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
-	}
-
-	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
-}
-
-#ifdef CONFIG_X86_32
-/*
- * function to set the IO-APIC physical IDs based on the
- * values stored in the MPC table.
- *
- * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
- */
-
-static void __init setup_ioapic_ids_from_mpc(void)
-{
-	union IO_APIC_reg_00 reg_00;
-	physid_mask_t phys_id_present_map;
-	int apic;
-	int i;
-	unsigned char old_id;
-	unsigned long flags;
-
-	if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
-		return;
-
-	/*
-	 * Don't check I/O APIC IDs for xAPIC systems.  They have
-	 * no meaning without the serial APIC bus.
-	 */
-	if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
-		|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return;
-	/*
-	 * This is broken; anything with a real cpu count has to
-	 * circumvent this idiocy regardless.
-	 */
-	phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
-
-	/*
-	 * Set the IOAPIC ID to the value stored in the MPC table.
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-
-		/* Read the register 0 value */
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_00.raw = io_apic_read(apic, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-
-		old_id = mp_ioapics[apic].mp_apicid;
-
-		if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) {
-			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
-				apic, mp_ioapics[apic].mp_apicid);
-			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
-				reg_00.bits.ID);
-			mp_ioapics[apic].mp_apicid = reg_00.bits.ID;
-		}
-
-		/*
-		 * Sanity check, is the ID really free? Every APIC in a
-		 * system must have a unique ID or we get lots of nice
-		 * 'stuck on smp_invalidate_needed IPI wait' messages.
-		 */
-		if (check_apicid_used(phys_id_present_map,
-					mp_ioapics[apic].mp_apicid)) {
-			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
-				apic, mp_ioapics[apic].mp_apicid);
-			for (i = 0; i < get_physical_broadcast(); i++)
-				if (!physid_isset(i, phys_id_present_map))
-					break;
-			if (i >= get_physical_broadcast())
-				panic("Max APIC ID exceeded!\n");
-			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
-				i);
-			physid_set(i, phys_id_present_map);
-			mp_ioapics[apic].mp_apicid = i;
-		} else {
-			physid_mask_t tmp;
-			tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid);
-			apic_printk(APIC_VERBOSE, "Setting %d in the "
-					"phys_id_present_map\n",
-					mp_ioapics[apic].mp_apicid);
-			physids_or(phys_id_present_map, phys_id_present_map, tmp);
-		}
-
-
-		/*
-		 * We need to adjust the IRQ routing table
-		 * if the ID changed.
-		 */
-		if (old_id != mp_ioapics[apic].mp_apicid)
-			for (i = 0; i < mp_irq_entries; i++)
-				if (mp_irqs[i].mp_dstapic == old_id)
-					mp_irqs[i].mp_dstapic
-						= mp_ioapics[apic].mp_apicid;
-
-		/*
-		 * Read the right value from the MPC table and
-		 * write it into the ID register.
-		 */
-		apic_printk(APIC_VERBOSE, KERN_INFO
-			"...changing IO-APIC physical APIC ID to %d ...",
-			mp_ioapics[apic].mp_apicid);
-
-		reg_00.bits.ID = mp_ioapics[apic].mp_apicid;
-		spin_lock_irqsave(&ioapic_lock, flags);
-
-		/*
-		 * Sanity check
-		 */
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_00.raw = io_apic_read(apic, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid)
-			printk("could not set ID!\n");
-		else
-			apic_printk(APIC_VERBOSE, " ok.\n");
-	}
-}
-#endif
-
-int no_timer_check __initdata;
-
-static int __init notimercheck(char *s)
-{
-	no_timer_check = 1;
-	return 1;
-}
-__setup("no_timer_check", notimercheck);
-
-/*
- * There is a nasty bug in some older SMP boards, their mptable lies
- * about the timer IRQ. We do the following to work around the situation:
- *
- *	- timer IRQ defaults to IO-APIC IRQ
- *	- if this function detects that timer IRQs are defunct, then we fall
- *	  back to ISA timer IRQs
- */
-static int __init timer_irq_works(void)
-{
-	unsigned long t1 = jiffies;
-	unsigned long flags;
-
-	if (no_timer_check)
-		return 1;
-
-	local_save_flags(flags);
-	local_irq_enable();
-	/* Let ten ticks pass... */
-	mdelay((10 * 1000) / HZ);
-	local_irq_restore(flags);
-
-	/*
-	 * Expect a few ticks at least, to be sure some possible
-	 * glue logic does not lock up after one or two first
-	 * ticks in a non-ExtINT mode.  Also the local APIC
-	 * might have cached one ExtINT interrupt.  Finally, at
-	 * least one tick may be lost due to delays.
-	 */
-
-	/* jiffies wrap? */
-	if (time_after(jiffies, t1 + 4))
-		return 1;
-	return 0;
-}
-
-/*
- * In the SMP+IOAPIC case it might happen that there are an unspecified
- * number of pending IRQ events unhandled. These cases are very rare,
- * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
- * better to do it this way as thus we do not have to be aware of
- * 'pending' interrupts in the IRQ path, except at this point.
- */
-/*
- * Edge triggered needs to resend any interrupt
- * that was delayed but this is now handled in the device
- * independent code.
- */
-
-/*
- * Starting up a edge-triggered IO-APIC interrupt is
- * nasty - we need to make sure that we get the edge.
- * If it is already asserted for some reason, we need
- * return 1 to indicate that is was pending.
- *
- * This is not complete - we should be able to fake
- * an edge even if it isn't on the 8259A...
- */
-
-static unsigned int startup_ioapic_irq(unsigned int irq)
-{
-	int was_pending = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	if (irq < 16) {
-		disable_8259A_irq(irq);
-		if (i8259A_irq_pending(irq))
-			was_pending = 1;
-	}
-	__unmask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return was_pending;
-}
-
-#ifdef CONFIG_X86_64
-static int ioapic_retrigger_irq(unsigned int irq)
-{
-
-	struct irq_cfg *cfg = irq_cfg(irq);
-	unsigned long flags;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	return 1;
-}
-#else
-static int ioapic_retrigger_irq(unsigned int irq)
-{
-        send_IPI_self(irq_cfg(irq)->vector);
-
-        return 1;
-}
-#endif
-
-/*
- * Level and edge triggered IO-APIC interrupts need different handling,
- * so we use two separate IRQ descriptors. Edge triggered IRQs can be
- * handled with the level-triggered descriptor, but that one has slightly
- * more overhead. Level-triggered interrupts cannot be handled with the
- * edge-triggered handler, without risking IRQ storms and other ugly
- * races.
- */
-
-#ifdef CONFIG_SMP
-
-#ifdef CONFIG_INTR_REMAP
-static void ir_irq_migration(struct work_struct *work);
-
-static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
-
-/*
- * Migrate the IO-APIC irq in the presence of intr-remapping.
- *
- * For edge triggered, irq migration is a simple atomic update(of vector
- * and cpu destination) of IRTE and flush the hardware cache.
- *
- * For level triggered, we need to modify the io-apic RTE aswell with the update
- * vector information, along with modifying IRTE with vector and destination.
- * So irq migration for level triggered is little  bit more complex compared to
- * edge triggered migration. But the good news is, we use the same algorithm
- * for level triggered migration as we have today, only difference being,
- * we now initiate the irq migration from process context instead of the
- * interrupt context.
- *
- * In future, when we do a directed EOI (combined with cpu EOI broadcast
- * suppression) to the IO-APIC, level triggered irq migration will also be
- * as simple as edge triggered migration and we can do the irq migration
- * with a simple atomic update to IO-APIC RTE.
- */
-static void migrate_ioapic_irq(int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg;
-	struct irq_desc *desc;
-	cpumask_t tmp, cleanup_mask;
-	struct irte irte;
-	int modify_ioapic_rte;
-	unsigned int dest;
-	unsigned long flags;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (get_irte(irq, &irte))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cfg = irq_cfg(irq);
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	desc = irq_to_desc(irq);
-	modify_ioapic_rte = desc->status & IRQ_LEVEL;
-	if (modify_ioapic_rte) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		__target_IO_APIC_irq(irq, dest, cfg->vector);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-	}
-
-	irte.vector = cfg->vector;
-	irte.dest_id = IRTE_DEST(dest);
-
-	/*
-	 * Modified the IRTE and flushes the Interrupt entry cache.
-	 */
-	modify_irte(irq, &irte);
-
-	if (cfg->move_in_progress) {
-		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
-		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
-		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
-		cfg->move_in_progress = 0;
-	}
-
-	desc->affinity = mask;
-}
-
-static int migrate_irq_remapped_level(int irq)
-{
-	int ret = -1;
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	mask_IO_APIC_irq(irq);
-
-	if (io_apic_level_ack_pending(irq)) {
-		/*
-	 	 * Interrupt in progress. Migrating irq now will change the
-		 * vector information in the IO-APIC RTE and that will confuse
-		 * the EOI broadcast performed by cpu.
-		 * So, delay the irq migration to the next instance.
-		 */
-		schedule_delayed_work(&ir_migration_work, 1);
-		goto unmask;
-	}
-
-	/* everthing is clear. we have right of way */
-	migrate_ioapic_irq(irq, desc->pending_mask);
-
-	ret = 0;
-	desc->status &= ~IRQ_MOVE_PENDING;
-	cpus_clear(desc->pending_mask);
-
-unmask:
-	unmask_IO_APIC_irq(irq);
-	return ret;
-}
-
-static void ir_irq_migration(struct work_struct *work)
-{
-	unsigned int irq;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(irq, desc) {
-		if (desc->status & IRQ_MOVE_PENDING) {
-			unsigned long flags;
-
-			spin_lock_irqsave(&desc->lock, flags);
-			if (!desc->chip->set_affinity ||
-			    !(desc->status & IRQ_MOVE_PENDING)) {
-				desc->status &= ~IRQ_MOVE_PENDING;
-				spin_unlock_irqrestore(&desc->lock, flags);
-				continue;
-			}
-
-			desc->chip->set_affinity(irq, desc->pending_mask);
-			spin_unlock_irqrestore(&desc->lock, flags);
-		}
-	}
-}
-
-/*
- * Migrates the IRQ destination in the process context.
- */
-static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	if (desc->status & IRQ_LEVEL) {
-		desc->status |= IRQ_MOVE_PENDING;
-		desc->pending_mask = mask;
-		migrate_irq_remapped_level(irq);
-		return;
-	}
-
-	migrate_ioapic_irq(irq, mask);
-}
-#endif
-
-asmlinkage void smp_irq_move_cleanup_interrupt(void)
-{
-	unsigned vector, me;
-	ack_APIC_irq();
-#ifdef CONFIG_X86_64
-	exit_idle();
-#endif
-	irq_enter();
-
-	me = smp_processor_id();
-	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
-		unsigned int irq;
-		struct irq_desc *desc;
-		struct irq_cfg *cfg;
-		irq = __get_cpu_var(vector_irq)[vector];
-
-		desc = irq_to_desc(irq);
-		if (!desc)
-			continue;
-
-		cfg = irq_cfg(irq);
-		spin_lock(&desc->lock);
-		if (!cfg->move_cleanup_count)
-			goto unlock;
-
-		if ((vector == cfg->vector) && cpu_isset(me, cfg->domain))
-			goto unlock;
-
-		__get_cpu_var(vector_irq)[vector] = -1;
-		cfg->move_cleanup_count--;
-unlock:
-		spin_unlock(&desc->lock);
-	}
-
-	irq_exit();
-}
-
-static void irq_complete_move(unsigned int irq)
-{
-	struct irq_cfg *cfg = irq_cfg(irq);
-	unsigned vector, me;
-
-	if (likely(!cfg->move_in_progress))
-		return;
-
-	vector = ~get_irq_regs()->orig_ax;
-	me = smp_processor_id();
-	if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) {
-		cpumask_t cleanup_mask;
-
-		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
-		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
-		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
-		cfg->move_in_progress = 0;
-	}
-}
-#else
-static inline void irq_complete_move(unsigned int irq) {}
-#endif
-#ifdef CONFIG_INTR_REMAP
-static void ack_x2apic_level(unsigned int irq)
-{
-	ack_x2APIC_irq();
-}
-
-static void ack_x2apic_edge(unsigned int irq)
-{
-	ack_x2APIC_irq();
-}
-#endif
-
-static void ack_apic_edge(unsigned int irq)
-{
-	irq_complete_move(irq);
-	move_native_irq(irq);
-	ack_APIC_irq();
-}
-
-#ifdef CONFIG_X86_64
-static void ack_apic_level(unsigned int irq)
-{
-	int do_unmask_irq = 0;
-
-	irq_complete_move(irq);
-#ifdef CONFIG_GENERIC_PENDING_IRQ
-	/* If we are moving the irq we need to mask it */
-	if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
-		do_unmask_irq = 1;
-		mask_IO_APIC_irq(irq);
-	}
-#endif
-
-	/*
-	 * We must acknowledge the irq before we move it or the acknowledge will
-	 * not propagate properly.
-	 */
-	ack_APIC_irq();
-
-	/* Now we can move and renable the irq */
-	if (unlikely(do_unmask_irq)) {
-		/* Only migrate the irq if the ack has been received.
-		 *
-		 * On rare occasions the broadcast level triggered ack gets
-		 * delayed going to ioapics, and if we reprogram the
-		 * vector while Remote IRR is still set the irq will never
-		 * fire again.
-		 *
-		 * To prevent this scenario we read the Remote IRR bit
-		 * of the ioapic.  This has two effects.
-		 * - On any sane system the read of the ioapic will
-		 *   flush writes (and acks) going to the ioapic from
-		 *   this cpu.
-		 * - We get to see if the ACK has actually been delivered.
-		 *
-		 * Based on failed experiments of reprogramming the
-		 * ioapic entry from outside of irq context starting
-		 * with masking the ioapic entry and then polling until
-		 * Remote IRR was clear before reprogramming the
-		 * ioapic I don't trust the Remote IRR bit to be
-		 * completey accurate.
-		 *
-		 * However there appears to be no other way to plug
-		 * this race, so if the Remote IRR bit is not
-		 * accurate and is causing problems then it is a hardware bug
-		 * and you can go talk to the chipset vendor about it.
-		 */
-		if (!io_apic_level_ack_pending(irq))
-			move_masked_irq(irq);
-		unmask_IO_APIC_irq(irq);
-	}
-}
-#else
-atomic_t irq_mis_count;
-static void ack_apic_level(unsigned int irq)
-{
-	unsigned long v;
-	int i;
-
-	irq_complete_move(irq);
-	move_native_irq(irq);
-	/*
-	* It appears there is an erratum which affects at least version 0x11
-	* of I/O APIC (that's the 82093AA and cores integrated into various
-	* chipsets).  Under certain conditions a level-triggered interrupt is
-	* erroneously delivered as edge-triggered one but the respective IRR
-	* bit gets set nevertheless.  As a result the I/O unit expects an EOI
-	* message but it will never arrive and further interrupts are blocked
-	* from the source.  The exact reason is so far unknown, but the
-	* phenomenon was observed when two consecutive interrupt requests
-	* from a given source get delivered to the same CPU and the source is
-	* temporarily disabled in between.
-	*
-	* A workaround is to simulate an EOI message manually.  We achieve it
-	* by setting the trigger mode to edge and then to level when the edge
-	* trigger mode gets detected in the TMR of a local APIC for a
-	* level-triggered interrupt.  We mask the source for the time of the
-	* operation to prevent an edge-triggered interrupt escaping meanwhile.
-	* The idea is from Manfred Spraul.  --macro
-	*/
-	i = irq_cfg(irq)->vector;
-
-	v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-
-	ack_APIC_irq();
-
-	if (!(v & (1 << (i & 0x1f)))) {
-		atomic_inc(&irq_mis_count);
-		spin_lock(&ioapic_lock);
-		__mask_and_edge_IO_APIC_irq(irq);
-		__unmask_and_level_IO_APIC_irq(irq);
-		spin_unlock(&ioapic_lock);
-	}
-}
-#endif
-
-static struct irq_chip ioapic_chip __read_mostly = {
-	.name 		= "IO-APIC",
-	.startup 	= startup_ioapic_irq,
-	.mask	 	= mask_IO_APIC_irq,
-	.unmask	 	= unmask_IO_APIC_irq,
-	.ack 		= ack_apic_edge,
-	.eoi 		= ack_apic_level,
-#ifdef CONFIG_SMP
-	.set_affinity 	= set_ioapic_affinity_irq,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-#ifdef CONFIG_INTR_REMAP
-static struct irq_chip ir_ioapic_chip __read_mostly = {
-	.name 		= "IR-IO-APIC",
-	.startup 	= startup_ioapic_irq,
-	.mask	 	= mask_IO_APIC_irq,
-	.unmask	 	= unmask_IO_APIC_irq,
-	.ack 		= ack_x2apic_edge,
-	.eoi 		= ack_x2apic_level,
-#ifdef CONFIG_SMP
-	.set_affinity 	= set_ir_ioapic_affinity_irq,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-#endif
-
-static inline void init_IO_APIC_traps(void)
-{
-	int irq;
-	struct irq_desc *desc;
-	struct irq_cfg *cfg;
-
-	/*
-	 * NOTE! The local APIC isn't very good at handling
-	 * multiple interrupts at the same interrupt level.
-	 * As the interrupt level is determined by taking the
-	 * vector number and shifting that right by 4, we
-	 * want to spread these out a bit so that they don't
-	 * all fall in the same interrupt level.
-	 *
-	 * Also, we've got to be careful not to trash gate
-	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
-	 */
-	for_each_irq_cfg(cfg) {
-		irq = cfg->irq;
-		if (IO_APIC_IRQ(irq) && !cfg->vector) {
-			/*
-			 * Hmm.. We don't have an entry for this,
-			 * so default to an old-fashioned 8259
-			 * interrupt if we can..
-			 */
-			if (irq < 16)
-				make_8259A_irq(irq);
-			else {
-				desc = irq_to_desc(irq);
-				/* Strange. Oh, well.. */
-				desc->chip = &no_irq_chip;
-			}
-		}
-	}
-}
-
-/*
- * The local APIC irq-chip implementation:
- */
-
-static void mask_lapic_irq(unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
-}
-
-static void unmask_lapic_irq(unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
-}
-
-static void ack_lapic_irq (unsigned int irq)
-{
-	ack_APIC_irq();
-}
-
-static struct irq_chip lapic_chip __read_mostly = {
-	.name		= "local-APIC",
-	.mask		= mask_lapic_irq,
-	.unmask		= unmask_lapic_irq,
-	.ack		= ack_lapic_irq,
-};
-
-static void lapic_register_intr(int irq)
-{
-	struct irq_desc *desc;
-
-	desc = irq_to_desc(irq);
-	desc->status &= ~IRQ_LEVEL;
-	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
-				      "edge");
-}
-
-static void __init setup_nmi(void)
-{
-	/*
-	 * Dirty trick to enable the NMI watchdog ...
-	 * We put the 8259A master into AEOI mode and
-	 * unmask on all local APICs LVT0 as NMI.
-	 *
-	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
-	 * is from Maciej W. Rozycki - so we do not have to EOI from
-	 * the NMI handler or the timer interrupt.
-	 */
-	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
-
-	enable_NMI_through_LVT0();
-
-	apic_printk(APIC_VERBOSE, " done.\n");
-}
-
-/*
- * This looks a bit hackish but it's about the only one way of sending
- * a few INTA cycles to 8259As and any associated glue logic.  ICR does
- * not support the ExtINT mode, unfortunately.  We need to send these
- * cycles as some i82489DX-based boards have glue logic that keeps the
- * 8259A interrupt line asserted until INTA.  --macro
- */
-static inline void __init unlock_ExtINT_logic(void)
-{
-	int apic, pin, i;
-	struct IO_APIC_route_entry entry0, entry1;
-	unsigned char save_control, save_freq_select;
-
-	pin  = find_isa_irq_pin(8, mp_INT);
-	if (pin == -1) {
-		WARN_ON_ONCE(1);
-		return;
-	}
-	apic = find_isa_irq_apic(8, mp_INT);
-	if (apic == -1) {
-		WARN_ON_ONCE(1);
-		return;
-	}
-
-	entry0 = ioapic_read_entry(apic, pin);
-	clear_IO_APIC_pin(apic, pin);
-
-	memset(&entry1, 0, sizeof(entry1));
-
-	entry1.dest_mode = 0;			/* physical delivery */
-	entry1.mask = 0;			/* unmask IRQ now */
-	entry1.dest = hard_smp_processor_id();
-	entry1.delivery_mode = dest_ExtINT;
-	entry1.polarity = entry0.polarity;
-	entry1.trigger = 0;
-	entry1.vector = 0;
-
-	ioapic_write_entry(apic, pin, entry1);
-
-	save_control = CMOS_READ(RTC_CONTROL);
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
-		   RTC_FREQ_SELECT);
-	CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
-
-	i = 100;
-	while (i-- > 0) {
-		mdelay(10);
-		if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
-			i -= 10;
-	}
-
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	clear_IO_APIC_pin(apic, pin);
-
-	ioapic_write_entry(apic, pin, entry0);
-}
-
-static int disable_timer_pin_1 __initdata;
-/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
-static int __init disable_timer_pin_setup(char *arg)
-{
-	disable_timer_pin_1 = 1;
-	return 0;
-}
-early_param("disable_timer_pin_1", disable_timer_pin_setup);
-
-int timer_through_8259 __initdata;
-
-/*
- * This code may look a bit paranoid, but it's supposed to cooperate with
- * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
- * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
- * fanatically on his truly buggy board.
- *
- * FIXME: really need to revamp this for all platforms.
- */
-static inline void __init check_timer(void)
-{
-	struct irq_cfg *cfg = irq_cfg(0);
-	int apic1, pin1, apic2, pin2;
-	unsigned long flags;
-	unsigned int ver;
-	int no_pin1 = 0;
-
-	local_irq_save(flags);
-
-        ver = apic_read(APIC_LVR);
-        ver = GET_APIC_VERSION(ver);
-
-	/*
-	 * get/set the timer IRQ vector:
-	 */
-	disable_8259A_irq(0);
-	assign_irq_vector(0, TARGET_CPUS);
-
-	/*
-	 * As IRQ0 is to be enabled in the 8259A, the virtual
-	 * wire has to be disabled in the local APIC.  Also
-	 * timer interrupts need to be acknowledged manually in
-	 * the 8259A for the i82489DX when using the NMI
-	 * watchdog as that APIC treats NMIs as level-triggered.
-	 * The AEOI mode will finish them in the 8259A
-	 * automatically.
-	 */
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-	init_8259A(1);
-#ifdef CONFIG_X86_32
-	timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
-#endif
-
-	pin1  = find_isa_irq_pin(0, mp_INT);
-	apic1 = find_isa_irq_apic(0, mp_INT);
-	pin2  = ioapic_i8259.pin;
-	apic2 = ioapic_i8259.apic;
-
-	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
-		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		    cfg->vector, apic1, pin1, apic2, pin2);
-
-	/*
-	 * Some BIOS writers are clueless and report the ExtINTA
-	 * I/O APIC input from the cascaded 8259A as the timer
-	 * interrupt input.  So just in case, if only one pin
-	 * was found above, try it both directly and through the
-	 * 8259A.
-	 */
-	if (pin1 == -1) {
-#ifdef CONFIG_INTR_REMAP
-		if (intr_remapping_enabled)
-			panic("BIOS bug: timer not connected to IO-APIC");
-#endif
-		pin1 = pin2;
-		apic1 = apic2;
-		no_pin1 = 1;
-	} else if (pin2 == -1) {
-		pin2 = pin1;
-		apic2 = apic1;
-	}
-
-	if (pin1 != -1) {
-		/*
-		 * Ok, does IRQ0 through the IOAPIC work?
-		 */
-		if (no_pin1) {
-			add_pin_to_irq(0, apic1, pin1);
-			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
-		}
-		unmask_IO_APIC_irq(0);
-		if (timer_irq_works()) {
-			if (nmi_watchdog == NMI_IO_APIC) {
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			if (disable_timer_pin_1 > 0)
-				clear_IO_APIC_pin(0, pin1);
-			goto out;
-		}
-#ifdef CONFIG_INTR_REMAP
-		if (intr_remapping_enabled)
-			panic("timer doesn't work through Interrupt-remapped IO-APIC");
-#endif
-		clear_IO_APIC_pin(apic1, pin1);
-		if (!no_pin1)
-			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
-				    "8254 timer not connected to IO-APIC\n");
-
-		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
-			    "(IRQ0) through the 8259A ...\n");
-		apic_printk(APIC_QUIET, KERN_INFO
-			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
-		/*
-		 * legacy devices should be connected to IO APIC #0
-		 */
-		replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
-		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
-		unmask_IO_APIC_irq(0);
-		enable_8259A_irq(0);
-		if (timer_irq_works()) {
-			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
-			timer_through_8259 = 1;
-			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			goto out;
-		}
-		/*
-		 * Cleanup, just in case ...
-		 */
-		disable_8259A_irq(0);
-		clear_IO_APIC_pin(apic2, pin2);
-		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
-	}
-
-	if (nmi_watchdog == NMI_IO_APIC) {
-		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
-			    "through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = NMI_NONE;
-	}
-#ifdef CONFIG_X86_32
-	timer_ack = 0;
-#endif
-
-	apic_printk(APIC_QUIET, KERN_INFO
-		    "...trying to set up timer as Virtual Wire IRQ...\n");
-
-	lapic_register_intr(0);
-	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
-	enable_8259A_irq(0);
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
-		goto out;
-	}
-	disable_8259A_irq(0);
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
-	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
-
-	apic_printk(APIC_QUIET, KERN_INFO
-		    "...trying to set up timer as ExtINT IRQ...\n");
-
-	init_8259A(0);
-	make_8259A_irq(0);
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-
-	unlock_ExtINT_logic();
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
-		goto out;
-	}
-	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
-	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
-		"report.  Then try booting with the 'noapic' option.\n");
-out:
-	local_irq_restore(flags);
-}
-
-/*
- * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
- * to devices.  However there may be an I/O APIC pin available for
- * this interrupt regardless.  The pin may be left unconnected, but
- * typically it will be reused as an ExtINT cascade interrupt for
- * the master 8259A.  In the MPS case such a pin will normally be
- * reported as an ExtINT interrupt in the MP table.  With ACPI
- * there is no provision for ExtINT interrupts, and in the absence
- * of an override it would be treated as an ordinary ISA I/O APIC
- * interrupt, that is edge-triggered and unmasked by default.  We
- * used to do this, but it caused problems on some systems because
- * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
- * the same ExtINT cascade interrupt to drive the local APIC of the
- * bootstrap processor.  Therefore we refrain from routing IRQ2 to
- * the I/O APIC in all cases now.  No actual device should request
- * it anyway.  --macro
- */
-#define PIC_IRQS	(1 << PIC_CASCADE_IR)
-
-void __init setup_IO_APIC(void)
-{
-
-#ifdef CONFIG_X86_32
-	enable_IO_APIC();
-#else
-	/*
-	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
-	 */
-#endif
-
-	io_apic_irqs = ~PIC_IRQS;
-
-	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
-        /*
-         * Set up IO-APIC IRQ routing.
-         */
-#ifdef CONFIG_X86_32
-        if (!acpi_ioapic)
-                setup_ioapic_ids_from_mpc();
-#endif
-	sync_Arb_IDs();
-	setup_IO_APIC_irqs();
-	init_IO_APIC_traps();
-	check_timer();
-}
-
-/*
- *      Called after all the initialization is done. If we didnt find any
- *      APIC bugs then we can allow the modify fast path
- */
-
-static int __init io_apic_bug_finalize(void)
-{
-        if (sis_apic_bug == -1)
-                sis_apic_bug = 0;
-        return 0;
-}
-
-late_initcall(io_apic_bug_finalize);
-
-struct sysfs_ioapic_data {
-	struct sys_device dev;
-	struct IO_APIC_route_entry entry[0];
-};
-static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
-
-static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
-		*entry = ioapic_read_entry(dev->id, i);
-
-	return 0;
-}
-
-static int ioapic_resume(struct sys_device *dev)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	unsigned long flags;
-	union IO_APIC_reg_00 reg_00;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
-		io_apic_write(dev->id, 0, reg_00.raw);
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
-		ioapic_write_entry(dev->id, i, entry[i]);
-
-	return 0;
-}
-
-static struct sysdev_class ioapic_sysdev_class = {
-	.name = "ioapic",
-	.suspend = ioapic_suspend,
-	.resume = ioapic_resume,
-};
-
-static int __init ioapic_init_sysfs(void)
-{
-	struct sys_device * dev;
-	int i, size, error;
-
-	error = sysdev_class_register(&ioapic_sysdev_class);
-	if (error)
-		return error;
-
-	for (i = 0; i < nr_ioapics; i++ ) {
-		size = sizeof(struct sys_device) + nr_ioapic_registers[i]
-			* sizeof(struct IO_APIC_route_entry);
-		mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
-		if (!mp_ioapic_data[i]) {
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-		dev = &mp_ioapic_data[i]->dev;
-		dev->id = i;
-		dev->cls = &ioapic_sysdev_class;
-		error = sysdev_register(dev);
-		if (error) {
-			kfree(mp_ioapic_data[i]);
-			mp_ioapic_data[i] = NULL;
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-	}
-
-	return 0;
-}
-
-device_initcall(ioapic_init_sysfs);
-
-/*
- * Dynamic irq allocate and deallocation
- */
-unsigned int create_irq_nr(unsigned int irq_want)
-{
-	/* Allocate an unused irq */
-	unsigned int irq;
-	unsigned int new;
-	unsigned long flags;
-	struct irq_cfg *cfg_new;
-
-#ifndef CONFIG_HAVE_SPARSE_IRQ
-	irq_want = nr_irqs - 1;
-#endif
-
-	irq = 0;
-	spin_lock_irqsave(&vector_lock, flags);
-	for (new = irq_want; new > 0; new--) {
-		if (platform_legacy_irq(new))
-			continue;
-		cfg_new = irq_cfg(new);
-		if (cfg_new && cfg_new->vector != 0)
-			continue;
-		/* check if need to create one */
-		if (!cfg_new)
-			cfg_new = irq_cfg_alloc(new);
-		if (__assign_irq_vector(new, TARGET_CPUS) == 0)
-			irq = new;
-		break;
-	}
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	if (irq > 0) {
-		dynamic_irq_init(irq);
-	}
-	return irq;
-}
-
-int create_irq(void)
-{
-	int irq;
-
-	irq = create_irq_nr(nr_irqs - 1);
-
-	if (irq == 0)
-		irq = -1;
-
-	return irq;
-}
-
-void destroy_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	dynamic_irq_cleanup(irq);
-
-#ifdef CONFIG_INTR_REMAP
-	free_irte(irq);
-#endif
-	spin_lock_irqsave(&vector_lock, flags);
-	__clear_irq_vector(irq);
-	spin_unlock_irqrestore(&vector_lock, flags);
-}
-
-/*
- * MSI message composition
- */
-#ifdef CONFIG_PCI_MSI
-static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
-{
-	struct irq_cfg *cfg;
-	int err;
-	unsigned dest;
-	cpumask_t tmp;
-
-	tmp = TARGET_CPUS;
-	err = assign_irq_vector(irq, tmp);
-	if (err)
-		return err;
-
-	cfg = irq_cfg(irq);
-	cpus_and(tmp, cfg->domain, tmp);
-	dest = cpu_mask_to_apicid(tmp);
-
-#ifdef CONFIG_INTR_REMAP
-	if (irq_remapped(irq)) {
-		struct irte irte;
-		int ir_index;
-		u16 sub_handle;
-
-		ir_index = map_irq_to_irte_handle(irq, &sub_handle);
-		BUG_ON(ir_index == -1);
-
-		memset (&irte, 0, sizeof(irte));
-
-		irte.present = 1;
-		irte.dst_mode = INT_DEST_MODE;
-		irte.trigger_mode = 0; /* edge */
-		irte.dlvry_mode = INT_DELIVERY_MODE;
-		irte.vector = cfg->vector;
-		irte.dest_id = IRTE_DEST(dest);
-
-		modify_irte(irq, &irte);
-
-		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->data = sub_handle;
-		msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
-				  MSI_ADDR_IR_SHV |
-				  MSI_ADDR_IR_INDEX1(ir_index) |
-				  MSI_ADDR_IR_INDEX2(ir_index);
-	} else
-#endif
-	{
-		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->address_lo =
-			MSI_ADDR_BASE_LO |
-			((INT_DEST_MODE == 0) ?
-				MSI_ADDR_DEST_MODE_PHYSICAL:
-				MSI_ADDR_DEST_MODE_LOGICAL) |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				MSI_ADDR_REDIRECTION_CPU:
-				MSI_ADDR_REDIRECTION_LOWPRI) |
-			MSI_ADDR_DEST_ID(dest);
-
-		msg->data =
-			MSI_DATA_TRIGGER_EDGE |
-			MSI_DATA_LEVEL_ASSERT |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				MSI_DATA_DELIVERY_FIXED:
-				MSI_DATA_DELIVERY_LOWPRI) |
-			MSI_DATA_VECTOR(cfg->vector);
-	}
-	return err;
-}
-
-#ifdef CONFIG_SMP
-static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg;
-	struct msi_msg msg;
-	unsigned int dest;
-	cpumask_t tmp;
-	struct irq_desc *desc;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cfg = irq_cfg(irq);
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	read_msi_msg(irq, &msg);
-
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
-	write_msi_msg(irq, &msg);
-	desc = irq_to_desc(irq);
-	desc->affinity = mask;
-}
-
-#ifdef CONFIG_INTR_REMAP
-/*
- * Migrate the MSI irq to another cpumask. This migration is
- * done in the process context using interrupt-remapping hardware.
- */
-static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg;
-	unsigned int dest;
-	cpumask_t tmp, cleanup_mask;
-	struct irte irte;
-	struct irq_desc *desc;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (get_irte(irq, &irte))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cfg = irq_cfg(irq);
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	irte.vector = cfg->vector;
-	irte.dest_id = IRTE_DEST(dest);
-
-	/*
-	 * atomically update the IRTE with the new destination and vector.
-	 */
-	modify_irte(irq, &irte);
-
-	/*
-	 * After this point, all the interrupts will start arriving
-	 * at the new destination. So, time to cleanup the previous
-	 * vector allocation.
-	 */
-	if (cfg->move_in_progress) {
-		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
-		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
-		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
-		cfg->move_in_progress = 0;
-	}
-
-	desc = irq_to_desc(irq);
-	desc->affinity = mask;
-}
-#endif
-#endif /* CONFIG_SMP */
-
-/*
- * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
- * which implement the MSI or MSI-X Capability Structure.
- */
-static struct irq_chip msi_chip = {
-	.name		= "PCI-MSI",
-	.unmask		= unmask_msi_irq,
-	.mask		= mask_msi_irq,
-	.ack		= ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_msi_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-#ifdef CONFIG_INTR_REMAP
-static struct irq_chip msi_ir_chip = {
-	.name		= "IR-PCI-MSI",
-	.unmask		= unmask_msi_irq,
-	.mask		= mask_msi_irq,
-	.ack		= ack_x2apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= ir_set_msi_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-/*
- * Map the PCI dev to the corresponding remapping hardware unit
- * and allocate 'nvec' consecutive interrupt-remapping table entries
- * in it.
- */
-static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
-{
-	struct intel_iommu *iommu;
-	int index;
-
-	iommu = map_dev_to_ir(dev);
-	if (!iommu) {
-		printk(KERN_ERR
-		       "Unable to map PCI %s to iommu\n", pci_name(dev));
-		return -ENOENT;
-	}
-
-	index = alloc_irte(iommu, irq, nvec);
-	if (index < 0) {
-		printk(KERN_ERR
-		       "Unable to allocate %d IRTE for PCI %s\n", nvec,
-		        pci_name(dev));
-		return -ENOSPC;
-	}
-	return index;
-}
-#endif
-
-static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq)
-{
-	int ret;
-	struct msi_msg msg;
-
-	ret = msi_compose_msg(dev, irq, &msg);
-	if (ret < 0)
-		return ret;
-
-	set_irq_msi(irq, desc);
-	write_msi_msg(irq, &msg);
-
-#ifdef CONFIG_INTR_REMAP
-	if (irq_remapped(irq)) {
-		struct irq_desc *desc = irq_to_desc(irq);
-		/*
-		 * irq migration in process context
-		 */
-		desc->status |= IRQ_MOVE_PCNTXT;
-		set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
-	} else
-#endif
-		set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
-
-	return 0;
-}
-
-static unsigned int build_irq_for_pci_dev(struct pci_dev *dev)
-{
-	unsigned int irq;
-
-	irq = dev->bus->number;
-	irq <<= 8;
-	irq |= dev->devfn;
-	irq <<= 12;
-
-	return irq;
-}
-
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	unsigned int irq;
-	int ret;
-	unsigned int irq_want;
-
-	irq_want = build_irq_for_pci_dev(dev) + 0x100;
-
-	irq = create_irq_nr(irq_want);
-	if (irq == 0)
-		return -1;
-
-#ifdef CONFIG_INTR_REMAP
-	if (!intr_remapping_enabled)
-		goto no_ir;
-
-	ret = msi_alloc_irte(dev, irq, 1);
-	if (ret < 0)
-		goto error;
-no_ir:
-#endif
-	ret = setup_msi_irq(dev, desc, irq);
-	if (ret < 0) {
-		destroy_irq(irq);
-		return ret;
-	}
-	return 0;
-
-#ifdef CONFIG_INTR_REMAP
-error:
-	destroy_irq(irq);
-	return ret;
-#endif
-}
-
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	unsigned int irq;
-	int ret, sub_handle;
-	struct msi_desc *desc;
-	unsigned int irq_want;
-
-#ifdef CONFIG_INTR_REMAP
-	struct intel_iommu *iommu = 0;
-	int index = 0;
-#endif
-
-	irq_want = build_irq_for_pci_dev(dev) + 0x100;
-	sub_handle = 0;
-	list_for_each_entry(desc, &dev->msi_list, list) {
-		irq = create_irq_nr(irq_want--);
-		if (irq == 0)
-			return -1;
-#ifdef CONFIG_INTR_REMAP
-		if (!intr_remapping_enabled)
-			goto no_ir;
-
-		if (!sub_handle) {
-			/*
-			 * allocate the consecutive block of IRTE's
-			 * for 'nvec'
-			 */
-			index = msi_alloc_irte(dev, irq, nvec);
-			if (index < 0) {
-				ret = index;
-				goto error;
-			}
-		} else {
-			iommu = map_dev_to_ir(dev);
-			if (!iommu) {
-				ret = -ENOENT;
-				goto error;
-			}
-			/*
-			 * setup the mapping between the irq and the IRTE
-			 * base index, the sub_handle pointing to the
-			 * appropriate interrupt remap table entry.
-			 */
-			set_irte_irq(irq, iommu, index, sub_handle);
-		}
-no_ir:
-#endif
-		ret = setup_msi_irq(dev, desc, irq);
-		if (ret < 0)
-			goto error;
-		sub_handle++;
-	}
-	return 0;
-
-error:
-	destroy_irq(irq);
-	return ret;
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	destroy_irq(irq);
-}
-
-#ifdef CONFIG_DMAR
-#ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg;
-	struct msi_msg msg;
-	unsigned int dest;
-	cpumask_t tmp;
-	struct irq_desc *desc;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cfg = irq_cfg(irq);
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	dmar_msi_read(irq, &msg);
-
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
-	dmar_msi_write(irq, &msg);
-	desc = irq_to_desc(irq);
-	desc->affinity = mask;
-}
-#endif /* CONFIG_SMP */
-
-struct irq_chip dmar_msi_type = {
-	.name = "DMAR_MSI",
-	.unmask = dmar_msi_unmask,
-	.mask = dmar_msi_mask,
-	.ack = ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity = dmar_msi_set_affinity,
-#endif
-	.retrigger = ioapic_retrigger_irq,
-};
-
-int arch_setup_dmar_msi(unsigned int irq)
-{
-	int ret;
-	struct msi_msg msg;
-
-	ret = msi_compose_msg(NULL, irq, &msg);
-	if (ret < 0)
-		return ret;
-	dmar_msi_write(irq, &msg);
-	set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
-		"edge");
-	return 0;
-}
-#endif
-
-#endif /* CONFIG_PCI_MSI */
-/*
- * Hypertransport interrupt support
- */
-#ifdef CONFIG_HT_IRQ
-
-#ifdef CONFIG_SMP
-
-static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
-	struct ht_irq_msg msg;
-	fetch_ht_irq_msg(irq, &msg);
-
-	msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
-	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
-
-	msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
-	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
-
-	write_ht_irq_msg(irq, &msg);
-}
-
-static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg;
-	unsigned int dest;
-	cpumask_t tmp;
-	struct irq_desc *desc;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cfg = irq_cfg(irq);
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	target_ht_irq(irq, dest, cfg->vector);
-	desc = irq_to_desc(irq);
-	desc->affinity = mask;
-}
-#endif
-
-static struct irq_chip ht_irq_chip = {
-	.name		= "PCI-HT",
-	.mask		= mask_ht_irq,
-	.unmask		= unmask_ht_irq,
-	.ack		= ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_ht_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
-{
-	struct irq_cfg *cfg;
-	int err;
-	cpumask_t tmp;
-
-	tmp = TARGET_CPUS;
-	err = assign_irq_vector(irq, tmp);
-	if (!err) {
-		struct ht_irq_msg msg;
-		unsigned dest;
-
-		cfg = irq_cfg(irq);
-		cpus_and(tmp, cfg->domain, tmp);
-		dest = cpu_mask_to_apicid(tmp);
-
-		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
-
-		msg.address_lo =
-			HT_IRQ_LOW_BASE |
-			HT_IRQ_LOW_DEST_ID(dest) |
-			HT_IRQ_LOW_VECTOR(cfg->vector) |
-			((INT_DEST_MODE == 0) ?
-				HT_IRQ_LOW_DM_PHYSICAL :
-				HT_IRQ_LOW_DM_LOGICAL) |
-			HT_IRQ_LOW_RQEOI_EDGE |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				HT_IRQ_LOW_MT_FIXED :
-				HT_IRQ_LOW_MT_ARBITRATED) |
-			HT_IRQ_LOW_IRQ_MASKED;
-
-		write_ht_irq_msg(irq, &msg);
-
-		set_irq_chip_and_handler_name(irq, &ht_irq_chip,
-					      handle_edge_irq, "edge");
-	}
-	return err;
-}
-#endif /* CONFIG_HT_IRQ */
-
-/* --------------------------------------------------------------------------
-                          ACPI-based IOAPIC Configuration
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-#ifdef CONFIG_X86_32
-int __init io_apic_get_unique_id(int ioapic, int apic_id)
-{
-	union IO_APIC_reg_00 reg_00;
-	static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
-	physid_mask_t tmp;
-	unsigned long flags;
-	int i = 0;
-
-	/*
-	 * The P4 platform supports up to 256 APIC IDs on two separate APIC
-	 * buses (one for LAPICs, one for IOAPICs), where predecessors only
-	 * supports up to 16 on one shared APIC bus.
-	 *
-	 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
-	 *      advantage of new APIC bus architecture.
-	 */
-
-	if (physids_empty(apic_id_map))
-		apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(ioapic, 0);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	if (apic_id >= get_physical_broadcast()) {
-		printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
-			"%d\n", ioapic, apic_id, reg_00.bits.ID);
-		apic_id = reg_00.bits.ID;
-	}
-
-	/*
-	 * Every APIC in a system must have a unique ID or we get lots of nice
-	 * 'stuck on smp_invalidate_needed IPI wait' messages.
-	 */
-	if (check_apicid_used(apic_id_map, apic_id)) {
-
-		for (i = 0; i < get_physical_broadcast(); i++) {
-			if (!check_apicid_used(apic_id_map, i))
-				break;
-		}
-
-		if (i == get_physical_broadcast())
-			panic("Max apic_id exceeded!\n");
-
-		printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
-			"trying %d\n", ioapic, apic_id, i);
-
-		apic_id = i;
-	}
-
-	tmp = apicid_to_cpu_present(apic_id);
-	physids_or(apic_id_map, apic_id_map, tmp);
-
-	if (reg_00.bits.ID != apic_id) {
-		reg_00.bits.ID = apic_id;
-
-		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(ioapic, 0, reg_00.raw);
-		reg_00.raw = io_apic_read(ioapic, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-
-		/* Sanity check */
-		if (reg_00.bits.ID != apic_id) {
-			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
-			return -1;
-		}
-	}
-
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
-
-	return apic_id;
-}
-
-int __init io_apic_get_version(int ioapic)
-{
-	union IO_APIC_reg_01	reg_01;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return reg_01.bits.version;
-}
-#endif
-
-int __init io_apic_get_redir_entries (int ioapic)
-{
-	union IO_APIC_reg_01	reg_01;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return reg_01.bits.entries;
-}
-
-
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
-{
-	if (!IO_APIC_IRQ(irq)) {
-		apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
-			ioapic);
-		return -EINVAL;
-	}
-
-	/*
-	 * IRQs < 16 are already in the irq_2_pin[] map
-	 */
-	if (irq >= 16)
-		add_pin_to_irq(irq, ioapic, pin);
-
-	setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity);
-
-	return 0;
-}
-
-
-int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
-{
-	int i;
-
-	if (skip_ioapic_setup)
-		return -1;
-
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == mp_INT &&
-		    mp_irqs[i].mp_srcbusirq == bus_irq)
-			break;
-	if (i >= mp_irq_entries)
-		return -1;
-
-	*trigger = irq_trigger(i);
-	*polarity = irq_polarity(i);
-	return 0;
-}
-
-#endif /* CONFIG_ACPI */
-
-/*
- * This function currently is only a helper for the i386 smp boot process where
- * we need to reprogram the ioredtbls to cater for the cpus which have come online
- * so mask in all cases should simply be TARGET_CPUS
- */
-#ifdef CONFIG_SMP
-void __init setup_ioapic_dest(void)
-{
-	int pin, ioapic, irq, irq_entry;
-	struct irq_cfg *cfg;
-
-	if (skip_ioapic_setup == 1)
-		return;
-
-	for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
-		for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
-			irq_entry = find_irq_entry(ioapic, pin, mp_INT);
-			if (irq_entry == -1)
-				continue;
-			irq = pin_2_irq(irq_entry, ioapic, pin);
-
-			/* setup_IO_APIC_irqs could fail to get vector for some device
-			 * when you have too many devices, because at that time only boot
-			 * cpu is online.
-			 */
-			cfg = irq_cfg(irq);
-			if (!cfg->vector)
-				setup_IO_APIC_irq(ioapic, pin, irq,
-						  irq_trigger(irq_entry),
-						  irq_polarity(irq_entry));
-#ifdef CONFIG_INTR_REMAP
-			else if (intr_remapping_enabled)
-				set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
-#endif
-			else
-				set_ioapic_affinity_irq(irq, TARGET_CPUS);
-		}
-
-	}
-}
-#endif
-
-#ifdef CONFIG_X86_64
-#define IOAPIC_RESOURCE_NAME_SIZE 11
-
-static struct resource *ioapic_resources;
-
-static struct resource * __init ioapic_setup_resources(void)
-{
-	unsigned long n;
-	struct resource *res;
-	char *mem;
-	int i;
-
-	if (nr_ioapics <= 0)
-		return NULL;
-
-	n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
-	n *= nr_ioapics;
-
-	mem = alloc_bootmem(n);
-	res = (void *)mem;
-
-	if (mem != NULL) {
-		mem += sizeof(struct resource) * nr_ioapics;
-
-		for (i = 0; i < nr_ioapics; i++) {
-			res[i].name = mem;
-			res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-			sprintf(mem,  "IOAPIC %u", i);
-			mem += IOAPIC_RESOURCE_NAME_SIZE;
-		}
-	}
-
-	ioapic_resources = res;
-
-	return res;
-}
-#endif
-
-void __init ioapic_init_mappings(void)
-{
-	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
-	int i;
-#ifdef CONFIG_X86_64
-	struct resource *ioapic_res;
-
-	ioapic_res = ioapic_setup_resources();
-#endif
-	for (i = 0; i < nr_ioapics; i++) {
-		if (smp_found_config) {
-			ioapic_phys = mp_ioapics[i].mp_apicaddr;
-#ifdef CONFIG_X86_32
-                        if (!ioapic_phys) {
-                                printk(KERN_ERR
-                                       "WARNING: bogus zero IO-APIC "
-                                       "address found in MPTABLE, "
-                                       "disabling IO/APIC support!\n");
-                                smp_found_config = 0;
-                                skip_ioapic_setup = 1;
-                                goto fake_ioapic_page;
-                        }
-#endif
-		} else {
-#ifdef CONFIG_X86_32
-fake_ioapic_page:
-#endif
-			ioapic_phys = (unsigned long)
-				alloc_bootmem_pages(PAGE_SIZE);
-			ioapic_phys = __pa(ioapic_phys);
-		}
-		set_fixmap_nocache(idx, ioapic_phys);
-		apic_printk(APIC_VERBOSE,
-			    "mapped IOAPIC to %08lx (%08lx)\n",
-			    __fix_to_virt(idx), ioapic_phys);
-		idx++;
-
-#ifdef CONFIG_X86_64
-		if (ioapic_res != NULL) {
-			ioapic_res->start = ioapic_phys;
-			ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
-			ioapic_res++;
-		}
-#endif
-	}
-}
-
-#ifdef CONFIG_X86_64
-static int __init ioapic_insert_resources(void)
-{
-	int i;
-	struct resource *r = ioapic_resources;
-
-	if (!r) {
-		printk(KERN_ERR
-		       "IO APIC resources could be not be allocated.\n");
-		return -1;
-	}
-
-	for (i = 0; i < nr_ioapics; i++) {
-		insert_resource(&iomem_resource, r);
-		r++;
-	}
-
-	return 0;
-}
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
-#endif