diff options
author | Tony Lindgren <tony@atomide.com> | 2019-11-20 19:01:38 +0100 |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2019-11-20 19:01:38 +0100 |
commit | b82049f2c1395d0bf99f0ae291c748c9dcb7d507 (patch) | |
tree | 97b7a0e9da572f1b6ab9e3fd2e6fee6101f02db5 /arch | |
parent | ARM: OMAP2+: Drop legacy platform data for am335x musb (diff) | |
parent | ARM: OMAP2+: Add missing put_device() call in omapdss_init_of() (diff) | |
download | linux-b82049f2c1395d0bf99f0ae291c748c9dcb7d507.tar.xz linux-b82049f2c1395d0bf99f0ae291c748c9dcb7d507.zip |
Merge tag 'omap-for-v5.5/soc-late-signed' into omap-for-v5.5/ti-sysc-late
Few late SoC changes for v5.5 merge window
These changes just clean up few typos, and there is one non-critical
correction of missing put_device() after calling of_platform_populate()
for display controller.
Naturally none of this is urgent and can be merged when suitable.
Diffstat (limited to 'arch')
39 files changed, 465 insertions, 431 deletions
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 18f70b35da4c..204bccfcc110 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -432,7 +432,7 @@ pinctrl-0 = <&mmc0_pins_default>; }; -&gpio0 { +&gpio0_target { /* Do not idle the GPIO used for holding the VTT regulator */ ti,no-reset-on-init; ti,no-idle-on-init; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index b75ed0b0aa8b..3a8a205c27b5 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -127,7 +127,7 @@ ranges = <0x0 0x5000 0x1000>; }; - target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x7000 0x4>, <0x7010 0x4>, @@ -2026,7 +2026,9 @@ reg = <0xe000 0x4>, <0xe054 0x4>; reg-names = "rev", "sysc"; - ti,sysc-midle ; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 883fb85135d4..1b4b2b0500e4 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -111,13 +111,13 @@ reg = <0x70>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c@0 { /* FMC A */ #address-cells = <1>; #size-cells = <0>; reg = <0>; - i2c-mux-idle-disconnect; }; i2c@1 { @@ -125,7 +125,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; - i2c-mux-idle-disconnect; }; i2c@2 { @@ -133,7 +132,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <2>; - i2c-mux-idle-disconnect; }; i2c@3 { @@ -141,7 +139,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <3>; - i2c-mux-idle-disconnect; }; i2c@4 { @@ -149,14 +146,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - i2c-mux-idle-disconnect; }; i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; - i2c-mux-idle-disconnect; ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; }; ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; }; @@ -182,14 +177,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <6>; - i2c-mux-idle-disconnect; }; i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; - i2c-mux-idle-disconnect; u41: pca9575@20 { compatible = "nxp,pca9575"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 5ead185d389d..8419915e7585 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -336,6 +336,8 @@ ti,hwmods = "dss_dispc"; clocks = <&disp_clk>; clock-names = "fck"; + + max-memory-bandwidth = <230000000>; }; rfbi: rfbi@4832a800 { diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index a2038d64cb2a..53962fdfea21 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2729,7 +2729,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; @@ -2765,8 +2765,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; @@ -2783,9 +2783,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x68000 0x2000>, @@ -2801,7 +2800,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2818,9 +2817,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x6c000 0x2000>, @@ -2836,7 +2834,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2853,9 +2851,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x70000 0x2000>, @@ -2871,7 +2868,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2888,9 +2885,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x74000 0x2000>, @@ -2906,7 +2902,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2923,9 +2919,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x78000 0x2000>, @@ -2941,7 +2936,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2958,9 +2953,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x7c000 0x2000>, @@ -2976,7 +2970,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 3fdd0a72f87f..506b118e511a 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -192,3 +192,7 @@ &twl_gpio { ti,use-leds; }; + +&twl_keypad { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index d01fc8744fd7..b6ef1a7ac8a4 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -124,6 +124,7 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; + spi-cs-high; backlight= <&backlight>; label = "lcd"; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 4454449de00c..a40fe8d49da6 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -369,7 +369,7 @@ compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; /* gpio_100 with gpmc_wait2 pad as wakeirq */ - interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, <&omap4_pmx_core 0x4e>; interrupt-names = "irq", "wakeup"; ref-clock-frequency = <26000000>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 14be2ecb62b1..55ea8b6189af 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -474,7 +474,7 @@ compatible = "ti,wl1271"; reg = <2>; /* gpio_53 with gpmc_ncs3 pad as wakeup */ - interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>, <&omap4_pmx_core 0x3a>; interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 3c274965ff40..91480ac1f328 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -512,7 +512,7 @@ compatible = "ti,wl1281"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 6dbbc9b3229c..d0032213101e 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -69,7 +69,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */ + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7fff555ee394..68ac04641bdb 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -362,7 +362,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wlcore_irq_pin>; interrupt-parent = <&gpio1>; - interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */ + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index fac2e57dcca9..4791834dacb2 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -1146,7 +1146,7 @@ }; }; - gpu_cm: clock-controller@1500 { + gpu_cm: gpu_cm@1500 { compatible = "ti,omap4-cm"; reg = <0x1500 0x100>; #address-cells = <1>; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 64eb896907bf..4e7db259d6dc 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -356,14 +356,15 @@ CONFIG_DRM_OMAP_CONNECTOR_HDMI=m CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m CONFIG_DRM_OMAP_PANEL_DPI=m CONFIG_DRM_OMAP_PANEL_DSI_CM=m -CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m -CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m -CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m -CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m -CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m -CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m CONFIG_DRM_TILCDC=m CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_TI_TFP410=m +CONFIG_DRM_PANEL_LG_LB035Q02=m +CONFIG_DRM_PANEL_NEC_NL8048HL11=m +CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m +CONFIG_DRM_PANEL_SONY_ACX565AKM=m +CONFIG_DRM_PANEL_TPO_TD028TTEC1=m +CONFIG_DRM_PANEL_TPO_TD043MTEA1=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -423,6 +424,7 @@ CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_SIMPLE=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_TEST=m CONFIG_NOP_USB_XCEIV=m CONFIG_AM335X_PHY_USB=m @@ -460,6 +462,7 @@ CONFIG_MMC_SDHCI_OMAP=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_CPCAP=m +CONFIG_LEDS_LM3532=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PCA963X=m CONFIG_LEDS_PWM=m diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 2a17dc1d122c..948da556162e 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -4,30 +4,25 @@ if ARCH_OMAP1 menu "TI OMAP1 specific features" comment "OMAP Core Type" - depends on ARCH_OMAP1 config ARCH_OMAP730 - depends on ARCH_OMAP1 bool "OMAP730 Based System" select ARCH_OMAP_OTG select CPU_ARM926T select OMAP_MPU_TIMER config ARCH_OMAP850 - depends on ARCH_OMAP1 bool "OMAP850 Based System" select ARCH_OMAP_OTG select CPU_ARM926T config ARCH_OMAP15XX - depends on ARCH_OMAP1 default y bool "OMAP15xx Based System" select CPU_ARM925T select OMAP_MPU_TIMER config ARCH_OMAP16XX - depends on ARCH_OMAP1 bool "OMAP16xx Based System" select ARCH_OMAP_OTG select CPU_ARM926T @@ -35,7 +30,6 @@ config ARCH_OMAP16XX config OMAP_MUX bool "OMAP multiplexing support" - depends on ARCH_OMAP default y help Pin multiplexing support for OMAP boards. If your bootloader @@ -60,25 +54,24 @@ config OMAP_MUX_WARNINGS printed, it's safe to deselect OMAP_MUX for your product. comment "OMAP Board Type" - depends on ARCH_OMAP1 config MACH_OMAP_INNOVATOR bool "TI Innovator" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) + depends on ARCH_OMAP15XX || ARCH_OMAP16XX help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. config MACH_OMAP_H2 bool "TI H2 Support" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. config MACH_OMAP_H3 bool "TI H3 Support" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help TI OMAP 1710 H3 board support. Say Y here if you have such a board. @@ -91,7 +84,7 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. @@ -106,21 +99,21 @@ config OMAP_OSK_MISTRAL config MACH_OMAP_PERSEUS2 bool "TI Perseus2" - depends on ARCH_OMAP1 && ARCH_OMAP730 + depends on ARCH_OMAP730 help Support for TI OMAP 730 Perseus2 board. Say Y here if you have such a board. config MACH_OMAP_FSAMPLE bool "TI F-Sample" - depends on ARCH_OMAP1 && ARCH_OMAP730 + depends on ARCH_OMAP730 help Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board. config MACH_OMAP_PALMTE bool "Palm Tungsten E" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX help Support for the Palm Tungsten E PDA. To boot the kernel, you'll need a PalmOS compatible bootloader; check out @@ -129,7 +122,7 @@ config MACH_OMAP_PALMTE config MACH_OMAP_PALMZ71 bool "Palm Zire71" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX help Support for the Palm Zire71 PDA. To boot the kernel, you'll need a PalmOS compatible bootloader; check out @@ -138,7 +131,7 @@ config MACH_OMAP_PALMZ71 config MACH_OMAP_PALMTT bool "Palm Tungsten|T" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX help Support for the Palm Tungsten|T PDA. To boot the kernel, you'll need a PalmOS compatible bootloader (Garux); check out @@ -147,7 +140,7 @@ config MACH_OMAP_PALMTT config MACH_SX1 bool "Siemens SX1" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX select I2C help Support for the Siemens SX1 phone. To boot the kernel, @@ -159,14 +152,14 @@ config MACH_SX1 config MACH_NOKIA770 bool "Nokia 770" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help Support for the Nokia 770 Internet Tablet. Say Y here if you have such a device. config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX select FIQ select GPIO_GENERIC_PLATFORM select LEDS_GPIO_REGISTER @@ -178,7 +171,7 @@ config MACH_AMS_DELTA config MACH_OMAP_GENERIC bool "Generic OMAP board" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) + depends on ARCH_OMAP15XX || ARCH_OMAP16XX help Support for generic OMAP-1510, 1610 or 1710 board with no FPGA. Can be used as template for porting Linux to diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 0254eb9cf8c6..4eea3e39e633 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -110,7 +110,7 @@ void __init ams_delta_init_fiq(struct gpio_chip *chip, /* * FIQ handler takes full control over serio data and clk GPIO - * pins. Initiaize them and keep requested so nobody can + * pins. Initialize them and keep requested so nobody can * interfere. Fail if any of those two couldn't be requested. */ switch (i) { diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8f208197988f..9ef2f222f1bd 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -29,6 +29,11 @@ obj-y += mcbsp.o endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o + +ifneq ($(CONFIG_MFD_CPCAP),) +obj-y += pmic-cpcap.o +endif + obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index f98c8ecc9ca2..dedd47e30b98 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -1147,7 +1147,21 @@ void clkdm_del_autodeps(struct clockdomain *clkdm) /* Clockdomain-to-clock/hwmod framework interface code */ -static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) +/** + * clkdm_clk_enable - add an enabled downstream clock to this clkdm + * @clkdm: struct clockdomain * + * @clk: struct clk * of the enabled downstream clock + * + * Increment the usecount of the clockdomain @clkdm and ensure that it + * is awake before @clk is enabled. Intended to be called by + * clk_enable() code. If the clockdomain is in software-supervised + * idle mode, force the clockdomain to wake. If the clockdomain is in + * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to + * ensure that devices in the clockdomain can be read from/written to + * by on-chip processors. Returns -EINVAL if passed null pointers; + * returns 0 upon success or if the clockdomain is in hwsup idle mode. + */ +int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *unused) { if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable) return -EINVAL; @@ -1175,33 +1189,6 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) } /** - * clkdm_clk_enable - add an enabled downstream clock to this clkdm - * @clkdm: struct clockdomain * - * @clk: struct clk * of the enabled downstream clock - * - * Increment the usecount of the clockdomain @clkdm and ensure that it - * is awake before @clk is enabled. Intended to be called by - * clk_enable() code. If the clockdomain is in software-supervised - * idle mode, force the clockdomain to wake. If the clockdomain is in - * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to - * ensure that devices in the clockdomain can be read from/written to - * by on-chip processors. Returns -EINVAL if passed null pointers; - * returns 0 upon success or if the clockdomain is in hwsup idle mode. - */ -int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) -{ - /* - * XXX Rewrite this code to maintain a list of enabled - * downstream clocks for debugging purposes? - */ - - if (!clk) - return -EINVAL; - - return _clkdm_clk_hwmod_enable(clkdm); -} - -/** * clkdm_clk_disable - remove an enabled downstream clock from this clkdm * @clkdm: struct clockdomain * * @clk: struct clk * of the disabled downstream clock @@ -1216,13 +1203,13 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) */ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) { - if (!clkdm || !clk || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) + if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) return -EINVAL; pwrdm_lock(clkdm->pwrdm.ptr); /* corner case: disabling unused clocks */ - if ((__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0) + if (clk && (__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0) goto ccd_exit; if (clkdm->usecount == 0) { @@ -1277,7 +1264,7 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh) if (!oh) return -EINVAL; - return _clkdm_clk_hwmod_enable(clkdm); + return clkdm_clk_enable(clkdm, NULL); } /** @@ -1300,35 +1287,10 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh) if (cpu_is_omap24xx() || cpu_is_omap34xx()) return 0; - /* - * XXX Rewrite this code to maintain a list of enabled - * downstream hwmods for debugging purposes? - */ - - if (!clkdm || !oh || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) + if (!oh) return -EINVAL; - pwrdm_lock(clkdm->pwrdm.ptr); - - if (clkdm->usecount == 0) { - pwrdm_unlock(clkdm->pwrdm.ptr); - WARN_ON(1); /* underflow */ - return -ERANGE; - } - - clkdm->usecount--; - if (clkdm->usecount > 0) { - pwrdm_unlock(clkdm->pwrdm.ptr); - return 0; - } - - arch_clkdm->clkdm_clk_disable(clkdm); - pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); - pwrdm_unlock(clkdm->pwrdm.ptr); - - pr_debug("clockdomain: %s: disabled\n", clkdm->name); - - return 0; + return clkdm_clk_disable(clkdm, NULL); } /** diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index c84b5e260617..73338cf80d76 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -684,7 +684,7 @@ static u32 am33xx_control_vals[ARRAY_SIZE(am43xx_control_reg_offsets)]; * * Save the wkup domain registers */ -void am43xx_control_save_context(void) +static void am43xx_control_save_context(void) { int i; @@ -698,7 +698,7 @@ void am43xx_control_save_context(void) * * Restore the wkup domain registers */ -void am43xx_control_restore_context(void) +static void am43xx_control_restore_context(void) { int i; diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 393b42110511..eceb4b09adb2 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -195,6 +195,7 @@ #define OMAP44XX_CONTROL_FUSE_MPU_OPP100 0x243 #define OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO 0x246 #define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO 0x249 +#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB 0x24C #define OMAP44XX_CONTROL_FUSE_CORE_OPP50 0x254 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100 0x257 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV 0x25A diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 439e143cad7b..46012ca812f4 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -265,6 +265,7 @@ static int __init omapdss_init_of(void) r = of_platform_populate(node, NULL, NULL, &pdev->dev); if (r) { pr_err("Unable to populate DSS submodule devices\n"); + put_device(&pdev->dev); return r; } diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 2d8f90546591..67fa28532a3a 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -227,7 +227,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET; - unsigned int wakeup_cpu; if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; @@ -292,7 +291,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * secure devices, CPUx does WFI which can result in * domain transition */ - wakeup_cpu = smp_processor_id(); pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); pwrdm_post_transition(NULL); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 3acb4192918d..1d55602b3f8f 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -119,11 +119,7 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od, /** * omap_device_build_from_dt - build an omap_device with multiple hwmods - * @pdev_name: name of the platform_device driver to use - * @pdev_id: this platform_device's connection ID - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata + * @pdev: The platform device to update. * * Function for building an omap_device already registered from device-tree * @@ -292,7 +288,7 @@ static int _omap_device_idle_hwmods(struct omap_device *od) /** * omap_device_get_context_loss_count - get lost context count - * @od: struct omap_device * + * @pdev: The platform device to update. * * Using the primary hwmod, query the context loss count for this * device. @@ -321,9 +317,8 @@ int omap_device_get_context_loss_count(struct platform_device *pdev) /** * omap_device_alloc - allocate an omap_device * @pdev: platform_device that will be included in this omap_device - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata + * @ohs: ptr to the omap_hwmod for this omap_device + * @oh_cnt: the size of the ohs list * * Convenience function for allocating an omap_device structure and filling * hwmods, and resources. @@ -649,7 +644,7 @@ struct dev_pm_domain omap_device_pm_domain = { /** * omap_device_register - register an omap_device with one omap_hwmod - * @od: struct omap_device * to register + * @pdev: the platform device (omap_device) to register. * * Register the omap_device structure. This currently just calls * platform_device_register() on the underlying platform_device. @@ -668,7 +663,7 @@ int omap_device_register(struct platform_device *pdev) /** * omap_device_enable - fully activate an omap_device - * @od: struct omap_device * to activate + * @pdev: the platform device to activate * * Do whatever is necessary for the hwmods underlying omap_device @od * to be accessible and ready to operate. This generally involves @@ -702,7 +697,7 @@ int omap_device_enable(struct platform_device *pdev) /** * omap_device_idle - idle an omap_device - * @od: struct omap_device * to idle + * @pdev: The platform_device (omap_device) to idle * * Idle omap_device @od. Device drivers call this function indirectly * via pm_runtime_put*(). Returns -EINVAL if the omap_device is not diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 203664c40d3d..a136788db839 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -623,39 +623,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) return 0; } -/** - * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware - * @oh: struct omap_hwmod * - * - * Prevent the hardware module @oh to send wakeups. Returns -EINVAL - * upon error or 0 upon success. - */ -static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) -{ - if (!oh->class->sysc || - !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) || - (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) || - (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP))) - return -EINVAL; - - if (!oh->class->sysc->sysc_fields) { - WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); - return -EINVAL; - } - - if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) - *v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift); - - if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) - _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); - if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); - - /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - - return 0; -} - static struct clockdomain *_get_clkdm(struct omap_hwmod *oh) { struct clk_hw_omap *clk; @@ -3868,70 +3835,6 @@ void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh) */ /** - * omap_hwmod_enable_wakeup - allow device to wake up the system - * @oh: struct omap_hwmod * - * - * Sets the module OCP socket ENAWAKEUP bit to allow the module to - * send wakeups to the PRCM, and enable I/O ring wakeup events for - * this IP block if it has dynamic mux entries. Eventually this - * should set PRCM wakeup registers to cause the PRCM to receive - * wakeup events from the module. Does not set any wakeup routing - * registers beyond this point - if the module is to wake up any other - * module or subsystem, that must be set separately. Called by - * omap_device code. Returns -EINVAL on error or 0 upon success. - */ -int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) -{ - unsigned long flags; - u32 v; - - spin_lock_irqsave(&oh->_lock, flags); - - if (oh->class->sysc && - (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { - v = oh->_sysc_cache; - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); - } - - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** - * omap_hwmod_disable_wakeup - prevent device from waking the system - * @oh: struct omap_hwmod * - * - * Clears the module OCP socket ENAWAKEUP bit to prevent the module - * from sending wakeups to the PRCM, and disable I/O ring wakeup - * events for this IP block if it has dynamic mux entries. Eventually - * this should clear PRCM wakeup registers to cause the PRCM to ignore - * wakeup events from the module. Does not set any wakeup routing - * registers beyond this point - if the module is to wake up any other - * module or subsystem, that must be set separately. Called by - * omap_device code. Returns -EINVAL on error or 0 upon success. - */ -int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) -{ - unsigned long flags; - u32 v; - - spin_lock_irqsave(&oh->_lock, flags); - - if (oh->class->sysc && - (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { - v = oh->_sysc_cache; - _disable_wakeup(oh, &v); - _write_sysconfig(v, oh); - } - - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** * omap_hwmod_assert_hardreset - assert the HW reset line of submodules * contained in the hwmod module. * @oh: struct omap_hwmod * diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index ef1bb08b1a2d..2d0fd99d4713 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -646,9 +646,6 @@ int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); -int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); -int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); - int omap_hwmod_for_each_by_class(const char *classname, int (*fn)(struct omap_hwmod *oh, void *user), diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 7266ce432a4a..2df8659612ef 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -583,7 +583,8 @@ static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_RESET_STATUS, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), .sysc_fields = &omap_hwmod_sysc_type2, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 74c04e613fde..c63f66427e46 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -230,8 +230,9 @@ static struct omap_hwmod am33xx_control_hwmod = { static struct omap_hwmod_class_sysconfig lcdc_sysc = { .rev_offs = 0x0, .sysc_offs = 0x54, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART, .sysc_fields = &omap_hwmod_sysc_type2, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b4a7b49746fc..292f544bd62d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -790,7 +790,7 @@ static struct omap_hwmod_class omap44xx_sha0_hwmod_class = { .sysc = &omap44xx_sha0_sysc, }; -struct omap_hwmod omap44xx_sha0_hwmod = { +static struct omap_hwmod omap44xx_sha0_hwmod = { .name = "sham", .class = &omap44xx_sha0_hwmod_class, .clkdm_name = "l4_secure_clkdm", @@ -974,7 +974,7 @@ static struct omap_hwmod omap44xx_des_hwmod = { }, }; -struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = { +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_des_hwmod, .clk = "l3_div_ck", diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index ce5a45c9e2c2..f8715bd96687 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -682,7 +682,7 @@ static struct omap_hwmod_class dra7xx_sha0_hwmod_class = { .sysc = &dra7xx_sha0_sysc, }; -struct omap_hwmod dra7xx_sha0_hwmod = { +static struct omap_hwmod dra7xx_sha0_hwmod = { .name = "sham", .class = &dra7xx_sha0_hwmod_class, .clkdm_name = "l4sec_clkdm", diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 6787f1e72c6b..a642d3b39e50 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -36,11 +36,6 @@ #define OMAP4_VDD_CORE_SR_VOLT_REG 0x61 #define OMAP4_VDD_CORE_SR_CMD_REG 0x62 -#define OMAP4_VP_CONFIG_ERROROFFSET 0x00 -#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 -#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04 -#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200 - static bool is_offset_valid; static u8 smps_offset; @@ -219,7 +214,8 @@ int __init omap4_twl_init(void) { struct voltagedomain *voltdm; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap44xx() || + of_find_compatible_node(NULL, NULL, "motorola,cpcap")) return -ENODEV; voltdm = voltdm_lookup("mpu"); diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index adea43ea1c60..985aeab9bc2a 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -32,20 +32,22 @@ #define OMAP4430_VDD_MPU_OPP50_UV 1025000 #define OMAP4430_VDD_MPU_OPP100_UV 1200000 -#define OMAP4430_VDD_MPU_OPPTURBO_UV 1313000 -#define OMAP4430_VDD_MPU_OPPNITRO_UV 1375000 +#define OMAP4430_VDD_MPU_OPPTURBO_UV 1325000 +#define OMAP4430_VDD_MPU_OPPNITRO_UV 1388000 +#define OMAP4430_VDD_MPU_OPPNITROSB_UV 1398000 struct omap_volt_data omap443x_vdd_mpu_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27), + VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITROSB_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB, 0xfa, 0x27), VOLT_DATA_DEFINE(0, 0, 0, 0), }; -#define OMAP4430_VDD_IVA_OPP50_UV 1013000 -#define OMAP4430_VDD_IVA_OPP100_UV 1188000 -#define OMAP4430_VDD_IVA_OPPTURBO_UV 1300000 +#define OMAP4430_VDD_IVA_OPP50_UV 950000 +#define OMAP4430_VDD_IVA_OPP100_UV 1114000 +#define OMAP4430_VDD_IVA_OPPTURBO_UV 1291000 struct omap_volt_data omap443x_vdd_iva_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), @@ -54,8 +56,8 @@ struct omap_volt_data omap443x_vdd_iva_volt_data[] = { VOLT_DATA_DEFINE(0, 0, 0, 0), }; -#define OMAP4430_VDD_CORE_OPP50_UV 1025000 -#define OMAP4430_VDD_CORE_OPP100_UV 1200000 +#define OMAP4430_VDD_CORE_OPP50_UV 962000 +#define OMAP4430_VDD_CORE_OPP100_UV 1127000 struct omap_volt_data omap443x_vdd_core_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c), diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index d942a3357090..02abeb44cab2 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -11,7 +11,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/of_platform.h> -#include <linux/ti_wilink_st.h> #include <linux/wl12xx.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -139,53 +138,6 @@ static void __init omap3_sbc_t3530_legacy_init(void) omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); } -static struct ti_st_plat_data wilink_pdata = { - .nshutdown_gpio = 137, - .dev_name = "/dev/ttyO1", - .flow_cntrl = 1, - .baud_rate = 300000, -}; - -static struct platform_device wl18xx_device = { - .name = "kim", - .id = -1, - .dev = { - .platform_data = &wilink_pdata, - } -}; - -static struct ti_st_plat_data wilink7_pdata = { - .nshutdown_gpio = 162, - .dev_name = "/dev/ttyO1", - .flow_cntrl = 1, - .baud_rate = 3000000, -}; - -static struct platform_device wl128x_device = { - .name = "kim", - .id = -1, - .dev = { - .platform_data = &wilink7_pdata, - } -}; - -static struct platform_device btwilink_device = { - .name = "btwilink", - .id = -1, -}; - -static void __init omap3_igep0020_rev_f_legacy_init(void) -{ - platform_device_register(&wl18xx_device); - platform_device_register(&btwilink_device); -} - -static void __init omap3_igep0030_rev_g_legacy_init(void) -{ - platform_device_register(&wl18xx_device); - platform_device_register(&btwilink_device); -} - static void __init omap3_evm_legacy_init(void) { hsmmc2_internal_input_clk(); @@ -299,8 +251,6 @@ static void __init omap3_tao3530_legacy_init(void) static void __init omap3_logicpd_torpedo_init(void) { omap3_gpio126_127_129(); - platform_device_register(&wl128x_device); - platform_device_register(&btwilink_device); } /* omap3pandora legacy devices */ @@ -679,8 +629,6 @@ static struct pdata_init pdata_quirks[] __initdata = { { "nokia,omap3-n900", nokia_n900_legacy_init, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, - { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, - { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, { "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1fde1bf53fb6..01ec1ba4878b 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -74,83 +74,6 @@ int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; } -/* - * This API is to be called during init to set the various voltage - * domains to the voltage as per the opp table. Typically we boot up - * at the nominal voltage. So this function finds out the rate of - * the clock associated with the voltage domain, finds out the correct - * opp entry and sets the voltage domain to the voltage specified - * in the opp entry - */ -static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, - const char *oh_name) -{ - struct voltagedomain *voltdm; - struct clk *clk; - struct dev_pm_opp *opp; - unsigned long freq, bootup_volt; - struct device *dev; - - if (!vdd_name || !clk_name || !oh_name) { - pr_err("%s: invalid parameters\n", __func__); - goto exit; - } - - if (!strncmp(oh_name, "mpu", 3)) - /* - * All current OMAPs share voltage rail and clock - * source, so CPU0 is used to represent the MPU-SS. - */ - dev = get_cpu_device(0); - else - dev = omap_device_get_by_hwmod_name(oh_name); - - if (IS_ERR(dev)) { - pr_err("%s: Unable to get dev pointer for hwmod %s\n", - __func__, oh_name); - goto exit; - } - - voltdm = voltdm_lookup(vdd_name); - if (!voltdm) { - pr_err("%s: unable to get vdd pointer for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - clk = clk_get(NULL, clk_name); - if (IS_ERR(clk)) { - pr_err("%s: unable to get clk %s\n", __func__, clk_name); - goto exit; - } - - freq = clk_get_rate(clk); - clk_put(clk); - - opp = dev_pm_opp_find_freq_ceil(dev, &freq); - if (IS_ERR(opp)) { - pr_err("%s: unable to find boot up OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - bootup_volt = dev_pm_opp_get_voltage(opp); - dev_pm_opp_put(opp); - - if (!bootup_volt) { - pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - voltdm_scale(voltdm, bootup_volt); - return 0; - -exit: - pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name); - return -EINVAL; -} - #ifdef CONFIG_SUSPEND static int omap_pm_enter(suspend_state_t suspend_state) { @@ -208,25 +131,6 @@ void omap_common_suspend_init(void *pm_suspend) } #endif /* CONFIG_SUSPEND */ -static void __init omap3_init_voltages(void) -{ - if (!soc_is_omap34xx()) - return; - - omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu"); - omap2_set_init_voltage("core", "l3_ick", "l3_main"); -} - -static void __init omap4_init_voltages(void) -{ - if (!soc_is_omap44xx()) - return; - - omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu"); - omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1"); - omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); -} - int __maybe_unused omap_pm_nop_init(void) { return 0; @@ -244,12 +148,9 @@ int __init omap2_common_pm_late_init(void) /* Init the voltage layer */ omap3_twl_init(); omap4_twl_init(); + omap4_cpcap_init(); omap_voltage_late_init(); - /* Initialize the voltages */ - omap3_init_voltages(); - omap4_init_voltages(); - /* Smartreflex device init */ omap_devinit_smartreflex(); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 8a55b69bca63..2a883a0c1fcd 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -107,6 +107,11 @@ extern u16 pm44xx_errata; #define IS_PM44XX_ERRATUM(id) 0 #endif +#define OMAP4_VP_CONFIG_ERROROFFSET 0x00 +#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 +#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04 +#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200 + #ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); @@ -134,6 +139,15 @@ static inline int omap4_twl_init(void) } #endif +#if IS_ENABLED(CONFIG_MFD_CPCAP) +extern int omap4_cpcap_init(void); +#else +static inline int omap4_cpcap_init(void) +{ + return -EINVAL; +} +#endif + #ifdef CONFIG_PM extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut); extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 485550af2506..5a7a949ae965 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -128,18 +128,9 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) return 0; } - /* - * Bootloader or kexec boot may have LOGICRETSTATE cleared - * for some domains. This is the case when kexec booting from - * Android kernels that support off mode for example. - * Make sure it's set at least for core and per, otherwise - * we currently will see lost GPIO interrupts for wlcore and - * smsc911x at least if per hits retention during idle. - */ if (!strncmp(pwrdm->name, "core", 4) || - !strncmp(pwrdm->name, "l4per", 5) || - !strncmp(pwrdm->name, "wkup", 4)) - pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_RET); + !strncmp(pwrdm->name, "l4per", 5)) + pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_OFF); pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC); if (!pwrst) diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c new file mode 100644 index 000000000000..eab281a5fc9f --- /dev/null +++ b/arch/arm/mach-omap2/pmic-cpcap.c @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * pmic-cpcap.c - CPCAP-specific functions for the OPP code + * + * Adapted from Motorola Mapphone Android Linux kernel + * Copyright (C) 2011 Motorola, Inc. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> + +#include "soc.h" +#include "pm.h" +#include "voltage.h" + +#include <linux/init.h> +#include "vc.h" + +/** + * omap_cpcap_vsel_to_vdc - convert CPCAP VSEL value to microvolts DC + * @vsel: CPCAP VSEL value to convert + * + * Returns the microvolts DC that the CPCAP PMIC should generate when + * programmed with @vsel. + */ +static unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel) +{ + if (vsel > 0x44) + vsel = 0x44; + return (((vsel * 125) + 6000)) * 100; +} + +/** + * omap_cpcap_uv_to_vsel - convert microvolts DC to CPCAP VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the CPCAP PMIC to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_cpcap_uv_to_vsel(unsigned long uv) +{ + if (uv < 600000) + uv = 600000; + else if (uv > 1450000) + uv = 1450000; + return DIV_ROUND_UP(uv - 600000, 12500); +} + +static struct omap_voltdm_pmic omap_cpcap_core = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 900000, + .vddmax = 1350000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x02, + .volt_reg_addr = 0x00, + .cmd_reg_addr = 0x01, + .i2c_high_speed = false, + .vsel_to_uv = omap_cpcap_vsel_to_uv, + .uv_to_vsel = omap_cpcap_uv_to_vsel, +}; + +static struct omap_voltdm_pmic omap_cpcap_iva = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 900000, + .vddmax = 1350000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x44, + .volt_reg_addr = 0x0, + .cmd_reg_addr = 0x01, + .i2c_high_speed = false, + .vsel_to_uv = omap_cpcap_vsel_to_uv, + .uv_to_vsel = omap_cpcap_uv_to_vsel, +}; + +/** + * omap_max8952_vsel_to_vdc - convert MAX8952 VSEL value to microvolts DC + * @vsel: MAX8952 VSEL value to convert + * + * Returns the microvolts DC that the MAX8952 Regulator should generate when + * programmed with @vsel. + */ +static unsigned long omap_max8952_vsel_to_uv(unsigned char vsel) +{ + if (vsel > 0x3F) + vsel = 0x3F; + return (((vsel * 100) + 7700)) * 100; +} + +/** + * omap_max8952_uv_to_vsel - convert microvolts DC to MAX8952 VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the MAX8952 Regulator to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_max8952_uv_to_vsel(unsigned long uv) +{ + if (uv < 770000) + uv = 770000; + else if (uv > 1400000) + uv = 1400000; + return DIV_ROUND_UP(uv - 770000, 10000); +} + +static struct omap_voltdm_pmic omap443x_max8952_mpu = { + .slew_rate = 16000, + .step_size = 10000, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 900000, + .vddmax = 1400000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x60, + .volt_reg_addr = 0x03, + .cmd_reg_addr = 0x03, + .i2c_high_speed = false, + .vsel_to_uv = omap_max8952_vsel_to_uv, + .uv_to_vsel = omap_max8952_uv_to_vsel, +}; + +/** + * omap_fan5355_vsel_to_vdc - convert FAN535503 VSEL value to microvolts DC + * @vsel: FAN535503 VSEL value to convert + * + * Returns the microvolts DC that the FAN535503 Regulator should generate when + * programmed with @vsel. + */ +static unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel) +{ + /* Extract bits[5:0] */ + vsel &= 0x3F; + + return (((vsel * 125) + 7500)) * 100; +} + +/** + * omap_fan535508_vsel_to_vdc - convert FAN535508 VSEL value to microvolts DC + * @vsel: FAN535508 VSEL value to convert + * + * Returns the microvolts DC that the FAN535508 Regulator should generate when + * programmed with @vsel. + */ +static unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel) +{ + /* Extract bits[5:0] */ + vsel &= 0x3F; + + if (vsel > 0x37) + vsel = 0x37; + return (((vsel * 125) + 7500)) * 100; +} + + +/** + * omap_fan535503_uv_to_vsel - convert microvolts DC to FAN535503 VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the MAX8952 Regulator to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_fan535503_uv_to_vsel(unsigned long uv) +{ + unsigned char vsel; + if (uv < 750000) + uv = 750000; + else if (uv > 1537500) + uv = 1537500; + + vsel = DIV_ROUND_UP(uv - 750000, 12500); + return vsel | 0xC0; +} + +/** + * omap_fan535508_uv_to_vsel - convert microvolts DC to FAN535508 VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the MAX8952 Regulator to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_fan535508_uv_to_vsel(unsigned long uv) +{ + unsigned char vsel; + if (uv < 750000) + uv = 750000; + else if (uv > 1437500) + uv = 1437500; + + vsel = DIV_ROUND_UP(uv - 750000, 12500); + return vsel | 0xC0; +} + +/* fan5335-core */ +static struct omap_voltdm_pmic omap4_fan_core = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 850000, + .vddmax = 1375000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x4A, + .i2c_high_speed = false, + .volt_reg_addr = 0x01, + .cmd_reg_addr = 0x01, + .vsel_to_uv = omap_fan535508_vsel_to_uv, + .uv_to_vsel = omap_fan535508_uv_to_vsel, +}; + +/* fan5335 iva */ +static struct omap_voltdm_pmic omap4_fan_iva = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 850000, + .vddmax = 1375000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x48, + .volt_reg_addr = 0x01, + .cmd_reg_addr = 0x01, + .i2c_high_speed = false, + .vsel_to_uv = omap_fan535503_vsel_to_uv, + .uv_to_vsel = omap_fan535503_uv_to_vsel, +}; + +int __init omap4_cpcap_init(void) +{ + struct voltagedomain *voltdm; + + if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap")) + return -ENODEV; + + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu); + + if (of_machine_is_compatible("motorola,droid-bionic")) { + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap_cpcap_core); + + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap_cpcap_iva); + } else { + voltdm = voltdm_lookup("core"); + omap_voltage_register_pmic(voltdm, &omap4_fan_core); + + voltdm = voltdm_lookup("iva"); + omap_voltage_register_pmic(voltdm, &omap4_fan_iva); + } + + return 0; +} + +static int __init cpcap_late_init(void) +{ + omap4_vc_set_pmic_signaling(PWRDM_POWER_RET); + + return 0; +} +omap_late_initcall(cpcap_late_init); diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 1d9346f2a4ae..25093c1e5b9a 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -745,7 +745,7 @@ struct pwrdm_ops omap4_pwrdm_operations = { static int omap44xx_prm_late_init(void); -void prm_save_context(void) +static void prm_save_context(void) { omap_prm_context.irq_enable = omap4_prm_read_inst_reg(AM43XX_PRM_OCP_SOCKET_INST, @@ -756,7 +756,7 @@ void prm_save_context(void) omap4_prcm_irq_setup.pm_ctrl); } -void prm_restore_context(void) +static void prm_restore_context(void) { omap4_prm_write_inst_reg(omap_prm_context.irq_enable, OMAP4430_PRM_OCP_SOCKET_INST, diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d76b1e5eb8ba..86f1ac4c2412 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -26,6 +26,31 @@ #include "scrm44xx.h" #include "control.h" +#define OMAP4430_VDD_IVA_I2C_DISABLE BIT(14) +#define OMAP4430_VDD_MPU_I2C_DISABLE BIT(13) +#define OMAP4430_VDD_CORE_I2C_DISABLE BIT(12) +#define OMAP4430_VDD_IVA_PRESENCE BIT(9) +#define OMAP4430_VDD_MPU_PRESENCE BIT(8) +#define OMAP4430_AUTO_CTRL_VDD_IVA(x) ((x) << 4) +#define OMAP4430_AUTO_CTRL_VDD_MPU(x) ((x) << 2) +#define OMAP4430_AUTO_CTRL_VDD_CORE(x) ((x) << 0) +#define OMAP4430_AUTO_CTRL_VDD_RET 2 + +#define OMAP4430_VDD_I2C_DISABLE_MASK \ + (OMAP4430_VDD_IVA_I2C_DISABLE | \ + OMAP4430_VDD_MPU_I2C_DISABLE | \ + OMAP4430_VDD_CORE_I2C_DISABLE) + +#define OMAP4_VDD_DEFAULT_VAL \ + (OMAP4430_VDD_I2C_DISABLE_MASK | \ + OMAP4430_VDD_IVA_PRESENCE | OMAP4430_VDD_MPU_PRESENCE | \ + OMAP4430_AUTO_CTRL_VDD_IVA(OMAP4430_AUTO_CTRL_VDD_RET) | \ + OMAP4430_AUTO_CTRL_VDD_MPU(OMAP4430_AUTO_CTRL_VDD_RET) | \ + OMAP4430_AUTO_CTRL_VDD_CORE(OMAP4430_AUTO_CTRL_VDD_RET)) + +#define OMAP4_VDD_RET_VAL \ + (OMAP4_VDD_DEFAULT_VAL & ~OMAP4430_VDD_I2C_DISABLE_MASK) + /** * struct omap_vc_channel_cfg - describe the cfg_channel bitfield * @sa: bit for slave address @@ -280,6 +305,26 @@ void omap3_vc_set_pmic_signaling(int core_next_state) } } +void omap4_vc_set_pmic_signaling(int core_next_state) +{ + struct voltagedomain *vd = vc.vd; + u32 val; + + if (!vd) + return; + + switch (core_next_state) { + case PWRDM_POWER_RET: + val = OMAP4_VDD_RET_VAL; + break; + default: + val = OMAP4_VDD_DEFAULT_VAL; + break; + } + + vd->write(val, OMAP4_PRM_VOLTCTRL_OFFSET); +} + /* * Configure signal polarity for sys_clkreq and sys_off_mode pins * as the default values are wrong and can cause the system to hang @@ -542,9 +587,19 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode) writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME); } +static void __init omap4_vc_init_pmic_signaling(struct voltagedomain *voltdm) +{ + if (vc.vd) + return; + + vc.vd = voltdm; + voltdm->write(OMAP4_VDD_DEFAULT_VAL, OMAP4_PRM_VOLTCTRL_OFFSET); +} + /* OMAP4 specific voltage init functions */ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) { + omap4_vc_init_pmic_signaling(voltdm); omap4_set_timings(voltdm, true); omap4_set_timings(voltdm, false); } @@ -615,7 +670,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm) const struct i2c_init_data *i2c_data; if (!voltdm->pmic->i2c_high_speed) { - pr_warn("%s: only high speed supported!\n", __func__); + pr_info("%s: using bootloader low-speed timings\n", __func__); return; } diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 5bf088633b62..9e861dbc2c4c 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -117,7 +117,7 @@ extern struct omap_vc_param omap4_iva_vc_data; extern struct omap_vc_param omap4_core_vc_data; void omap3_vc_set_pmic_signaling(int core_next_state); - +void omap4_vc_set_pmic_signaling(int core_next_state); void omap_vc_init_channel(struct voltagedomain *voltdm); int omap_vc_pre_scale(struct voltagedomain *voltdm, |