summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorPaul Gortmaker <paul.gortmaker@windriver.com>2013-06-18 19:01:10 +0200
committerRalf Baechle <ralf@linux-mips.org>2013-07-01 15:10:53 +0200
commit169c3c164f0dd791dfa023ab02c12cb286a72e6e (patch)
treece6c3e9942658c8bd32d7a5c7b1ecc7a0543d64a /arch
parentMIPS: fcntl.h: Use __kernel_off_t, not off_t. (diff)
downloadlinux-169c3c164f0dd791dfa023ab02c12cb286a72e6e.tar.xz
linux-169c3c164f0dd791dfa023ab02c12cb286a72e6e.zip
MIPS: Delete Wind River ppmc eval board support.
This board has been EOL for many years now; lets not burden people doing build coverage and other tree wide work with working on essentially dead files. [ralf@linux-mips.org: Also remove arch/mips/include/asm/mach-wrppmc/war.h.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Patchwork: http://patchwork.linux-mips.org/patch/5503/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/mips/Kbuild.platforms1
-rw-r--r--arch/mips/Kconfig23
-rw-r--r--arch/mips/configs/wrppmc_defconfig97
-rw-r--r--arch/mips/include/asm/mach-wrppmc/mach-gt64120.h83
-rw-r--r--arch/mips/include/asm/mach-wrppmc/war.h24
-rw-r--r--arch/mips/pci/Makefile1
-rw-r--r--arch/mips/pci/fixup-wrppmc.c37
-rw-r--r--arch/mips/wrppmc/Makefile12
-rw-r--r--arch/mips/wrppmc/Platform7
-rw-r--r--arch/mips/wrppmc/irq.c56
-rw-r--r--arch/mips/wrppmc/pci.c52
-rw-r--r--arch/mips/wrppmc/reset.c41
-rw-r--r--arch/mips/wrppmc/serial.c80
-rw-r--r--arch/mips/wrppmc/setup.c128
-rw-r--r--arch/mips/wrppmc/time.c39
15 files changed, 0 insertions, 681 deletions
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 4b597d91a8d5..d9d81c219253 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -30,7 +30,6 @@ platforms += sibyte
platforms += sni
platforms += txx9
platforms += vr41xx
-platforms += wrppmc
# include the platform specific files
include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 26779ccae116..f4cc348034b7 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -712,29 +712,6 @@ config MIKROTIK_RB532
Support the Mikrotik(tm) RouterBoard 532 series,
based on the IDT RC32434 SoC.
-config WR_PPMC
- bool "Wind River PPMC board"
- select CEVT_R4K
- select CSRC_R4K
- select IRQ_CPU
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select PCI_GT64XXX_PCI0
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_CPU_MIPS64_R1
- select SYS_HAS_CPU_NEVADA
- select SYS_HAS_CPU_RM7000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the Wind River MIPS32 4KC PPMC evaluation
- board, which is based on GT64120 bridge chip.
-
config CAVIUM_OCTEON_SOC
bool "Cavium Networks Octeon SoC based boards"
select CEVT_R4K
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
deleted file mode 100644
index 44a451be359e..000000000000
--- a/arch/mips/configs/wrppmc_defconfig
+++ /dev/null
@@ -1,97 +0,0 @@
-CONFIG_WR_PPMC=y
-CONFIG_HZ_1000=y
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_ARPD=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SGI_IOC4=m
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_QLA3XXX=m
-CONFIG_CHELSIO_T3=m
-CONFIG_NETXEN_NIC=m
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_HW_RANDOM is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DLM=m
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200n8"
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
deleted file mode 100644
index 00fa3684ac98..000000000000
--- a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * This is a direct copy of the ev96100.h file, with a global
- * search and replace. The numbers are the same.
- *
- * The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
-#ifndef __ASM_MIPS_GT64120_H
-#define __ASM_MIPS_GT64120_H
-
-/*
- * This is the CPU physical memory map of PPMC Board:
- *
- * 0x00000000-0x03FFFFFF - 64MB SDRAM (SCS[0]#)
- * 0x1C000000-0x1C000000 - LED (CS0)
- * 0x1C800000-0x1C800007 - UART 16550 port (CS1)
- * 0x1F000000-0x1F000000 - MailBox (CS3)
- * 0x1FC00000-0x20000000 - 4MB Flash (BOOT CS)
- */
-
-#define WRPPMC_SDRAM_SCS0_BASE 0x00000000
-#define WRPPMC_SDRAM_SCS0_SIZE 0x04000000
-
-#define WRPPMC_UART16550_BASE 0x1C800000
-#define WRPPMC_UART16550_CLOCK 3686400 /* 3.68MHZ */
-
-#define WRPPMC_LED_BASE 0x1C000000
-#define WRPPMC_MBOX_BASE 0x1F000000
-
-#define WRPPMC_BOOTROM_BASE 0x1FC00000
-#define WRPPMC_BOOTROM_SIZE 0x00400000 /* 4M Flash */
-
-#define WRPPMC_MIPS_TIMER_IRQ 7 /* MIPS compare/count timer interrupt */
-#define WRPPMC_UART16550_IRQ 6
-#define WRPPMC_PCI_INTA_IRQ 3
-
-/*
- * PCI Bus I/O and Memory resources allocation
- *
- * NOTE: We only have PCI_0 hose interface
- */
-#define GT_PCI_MEM_BASE 0x13000000UL
-#define GT_PCI_MEM_SIZE 0x02000000UL
-#define GT_PCI_IO_BASE 0x11000000UL
-#define GT_PCI_IO_SIZE 0x02000000UL
-
-/*
- * PCI interrupts will come in on either the INTA or INTD interrupt lines,
- * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our
- * boards, they all either come in on IntD or they all come in on IntA, they
- * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
- * "requested" interrupt numbers and go through the list whenever we get an
- * IntA/D.
- *
- * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
- * INTD is 11.
- */
-#define GT_TIMER 4
-#define GT_INTA 2
-#define GT_INTD 5
-
-#ifndef __ASSEMBLY__
-
-/*
- * GT64120 internal register space base address
- */
-extern unsigned long gt64120_base;
-
-#define GT64120_BASE (gt64120_base)
-
-/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */
-#undef WRPPMC_EARLY_DEBUG
-
-#ifdef WRPPMC_EARLY_DEBUG
-extern void wrppmc_led_on(int mask);
-extern void wrppmc_led_off(int mask);
-extern void wrppmc_early_printk(const char *fmt, ...);
-#else
-#define wrppmc_early_printk(fmt, ...) do {} while (0)
-#endif /* WRPPMC_EARLY_DEBUG */
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_MIPS_GT64120_H */
diff --git a/arch/mips/include/asm/mach-wrppmc/war.h b/arch/mips/include/asm/mach-wrppmc/war.h
deleted file mode 100644
index e86084c0bd6b..000000000000
--- a/arch/mips/include/asm/mach-wrppmc/war.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_WRPPMC_WAR_H
-#define __ASM_MIPS_MACH_WRPPMC_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 1
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_WRPPMC_WAR_H */
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index fa3bcd233138..b56fbc06c60e 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o
obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
-obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CAVIUM_OCTEON_SOC) += pci-octeon.o pcie-octeon.o
obj-$(CONFIG_CPU_XLR) += pci-xlr.o
diff --git a/arch/mips/pci/fixup-wrppmc.c b/arch/mips/pci/fixup-wrppmc.c
deleted file mode 100644
index 29737edd121f..000000000000
--- a/arch/mips/pci/fixup-wrppmc.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * fixup-wrppmc.c: PPMC board specific PCI fixup
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, Wind River Inc. Rongkai.zhan (rongkai.zhan@windriver.com)
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/gt64120.h>
-
-/* PCI interrupt pins */
-#define PCI_INTA 1
-#define PCI_INTB 2
-#define PCI_INTC 3
-#define PCI_INTD 4
-
-#define PCI_SLOT_MAXNR 32 /* Each PCI bus has 32 physical slots */
-
-static char pci_irq_tab[PCI_SLOT_MAXNR][5] __initdata = {
- /* 0 INTA INTB INTC INTD */
- [0] = {0, 0, 0, 0, 0}, /* Slot 0: GT64120 PCI bridge */
- [6] = {0, WRPPMC_PCI_INTA_IRQ, 0, 0, 0},
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return pci_irq_tab[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/wrppmc/Makefile b/arch/mips/wrppmc/Makefile
deleted file mode 100644
index 307cc6920ce6..000000000000
--- a/arch/mips/wrppmc/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright 2006 Wind River System, Inc.
-# Author: Rongkai.Zhan <rongkai.zhan@windriver.com>
-#
-# Makefile for the Wind River MIPS 4Kc PPMC Eval Board
-#
-
-obj-y += irq.o pci.o reset.o serial.o setup.o time.o
diff --git a/arch/mips/wrppmc/Platform b/arch/mips/wrppmc/Platform
deleted file mode 100644
index dc78b25b95fe..000000000000
--- a/arch/mips/wrppmc/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Wind River PPMC Board (4KC + GT64120)
-#
-platform-$(CONFIG_WR_PPMC) += wrppmc/
-cflags-$(CONFIG_WR_PPMC) += \
- -I$(srctree)/arch/mips/include/asm/mach-wrppmc
-load-$(CONFIG_WR_PPMC) += 0xffffffff80100000
diff --git a/arch/mips/wrppmc/irq.c b/arch/mips/wrppmc/irq.c
deleted file mode 100644
index f237bf4d5c3a..000000000000
--- a/arch/mips/wrppmc/irq.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * irq.c: GT64120 Interrupt Controller
- *
- * Copyright (C) 2006, Wind River System Inc.
- * Author: Rongkai.Zhan, <rongkai.zhan@windriver.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/gt64120.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (pending & STATUSF_IP7)
- do_IRQ(WRPPMC_MIPS_TIMER_IRQ); /* CPU Compare/Count internal timer */
- else if (pending & STATUSF_IP6)
- do_IRQ(WRPPMC_UART16550_IRQ); /* UART 16550 port */
- else if (pending & STATUSF_IP3)
- do_IRQ(WRPPMC_PCI_INTA_IRQ); /* PCI INT_A */
- else
- spurious_interrupt();
-}
-
-/**
- * Initialize GT64120 Interrupt Controller
- */
-void gt64120_init_pic(void)
-{
- /* clear CPU Interrupt Cause Registers */
- GT_WRITE(GT_INTRCAUSE_OFS, (0x1F << 21));
- GT_WRITE(GT_HINTRCAUSE_OFS, 0x00);
-
- /* Disable all interrupts from GT64120 bridge chip */
- GT_WRITE(GT_INTRMASK_OFS, 0x00);
- GT_WRITE(GT_HINTRMASK_OFS, 0x00);
- GT_WRITE(GT_PCI0_ICMASK_OFS, 0x00);
- GT_WRITE(GT_PCI0_HICMASK_OFS, 0x00);
-}
-
-void __init arch_init_irq(void)
-{
- /* IRQ 0 - 7 are for MIPS common irq_cpu controller */
- mips_cpu_irq_init();
-
- gt64120_init_pic();
-}
diff --git a/arch/mips/wrppmc/pci.c b/arch/mips/wrppmc/pci.c
deleted file mode 100644
index 8b8a0e1a40ca..000000000000
--- a/arch/mips/wrppmc/pci.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * pci.c: GT64120 PCI support.
- *
- * Copyright (C) 2006, Wind River System Inc. Rongkai.Zhan <rongkai.zhan@windriver.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/gt64120.h>
-
-extern struct pci_ops gt64xxx_pci0_ops;
-
-static struct resource pci0_io_resource = {
- .name = "pci_0 io",
- .start = GT_PCI_IO_BASE,
- .end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource pci0_mem_resource = {
- .name = "pci_0 memory",
- .start = GT_PCI_MEM_BASE,
- .end = GT_PCI_MEM_BASE + GT_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct pci_controller hose_0 = {
- .pci_ops = &gt64xxx_pci0_ops,
- .io_resource = &pci0_io_resource,
- .mem_resource = &pci0_mem_resource,
-};
-
-static int __init gt64120_pci_init(void)
-{
- (void) GT_READ(GT_PCI0_CMD_OFS); /* Huh??? -- Ralf */
- (void) GT_READ(GT_PCI0_BARE_OFS);
-
- /* reset the whole PCI I/O space range */
- ioport_resource.start = GT_PCI_IO_BASE;
- ioport_resource.end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1;
-
- register_pci_controller(&hose_0);
- return 0;
-}
-
-arch_initcall(gt64120_pci_init);
diff --git a/arch/mips/wrppmc/reset.c b/arch/mips/wrppmc/reset.c
deleted file mode 100644
index 80beb188ed47..000000000000
--- a/arch/mips/wrppmc/reset.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1997 Ralf Baechle
- */
-#include <linux/irqflags.h>
-#include <linux/kernel.h>
-
-#include <asm/cacheflush.h>
-#include <asm/idle.h>
-#include <asm/mipsregs.h>
-#include <asm/processor.h>
-
-void wrppmc_machine_restart(char *command)
-{
- /*
- * Ouch, we're still alive ... This time we take the silver bullet ...
- * ... and find that we leave the hardware in a state in which the
- * kernel in the flush locks up somewhen during of after the PCI
- * detection stuff.
- */
- local_irq_disable();
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void wrppmc_machine_halt(void)
-{
- local_irq_disable();
-
- printk(KERN_NOTICE "You can safely turn off the power\n");
- while (1) {
- if (cpu_wait)
- cpu_wait();
- }
-}
diff --git a/arch/mips/wrppmc/serial.c b/arch/mips/wrppmc/serial.c
deleted file mode 100644
index 83f0f7d05187..000000000000
--- a/arch/mips/wrppmc/serial.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Registration of WRPPMC UART platform device.
- *
- * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/gt64120.h>
-
-static struct resource wrppmc_uart_resource[] __initdata = {
- {
- .start = WRPPMC_UART16550_BASE,
- .end = WRPPMC_UART16550_BASE + 7,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = WRPPMC_UART16550_IRQ,
- .end = WRPPMC_UART16550_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct plat_serial8250_port wrppmc_serial8250_port[] = {
- {
- .irq = WRPPMC_UART16550_IRQ,
- .uartclk = WRPPMC_UART16550_CLOCK,
- .iotype = UPIO_MEM,
- .flags = UPF_IOREMAP | UPF_SKIP_TEST,
- .mapbase = WRPPMC_UART16550_BASE,
- },
- {},
-};
-
-static __init int wrppmc_uart_add(void)
-{
- struct platform_device *pdev;
- int retval;
-
- pdev = platform_device_alloc("serial8250", -1);
- if (!pdev)
- return -ENOMEM;
-
- pdev->id = PLAT8250_DEV_PLATFORM;
- pdev->dev.platform_data = wrppmc_serial8250_port;
-
- retval = platform_device_add_resources(pdev, wrppmc_uart_resource,
- ARRAY_SIZE(wrppmc_uart_resource));
- if (retval)
- goto err_free_device;
-
- retval = platform_device_add(pdev);
- if (retval)
- goto err_free_device;
-
- return 0;
-
-err_free_device:
- platform_device_put(pdev);
-
- return retval;
-}
-device_initcall(wrppmc_uart_add);
diff --git a/arch/mips/wrppmc/setup.c b/arch/mips/wrppmc/setup.c
deleted file mode 100644
index ca65c84031a7..000000000000
--- a/arch/mips/wrppmc/setup.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * setup.c: Setup pointers to hardware dependent routines.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2006, Wind River System Inc. Rongkai.zhan <rongkai.zhan@windriver.com>
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/pm.h>
-
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/gt64120.h>
-
-unsigned long gt64120_base = KSEG1ADDR(0x14000000);
-
-#ifdef WRPPMC_EARLY_DEBUG
-
-static volatile unsigned char * wrppmc_led = \
- (volatile unsigned char *)KSEG1ADDR(WRPPMC_LED_BASE);
-
-/*
- * PPMC LED control register:
- * -) bit[0] controls DS1 LED (1 - OFF, 0 - ON)
- * -) bit[1] controls DS2 LED (1 - OFF, 0 - ON)
- * -) bit[2] controls DS4 LED (1 - OFF, 0 - ON)
- */
-void wrppmc_led_on(int mask)
-{
- unsigned char value = *wrppmc_led;
-
- value &= (0xF8 | mask);
- *wrppmc_led = value;
-}
-
-/* If mask = 0, turn off all LEDs */
-void wrppmc_led_off(int mask)
-{
- unsigned char value = *wrppmc_led;
-
- value |= (0x7 & mask);
- *wrppmc_led = value;
-}
-
-/*
- * We assume that bootloader has initialized UART16550 correctly
- */
-void __init wrppmc_early_putc(char ch)
-{
- static volatile unsigned char *wrppmc_uart = \
- (volatile unsigned char *)KSEG1ADDR(WRPPMC_UART16550_BASE);
- unsigned char value;
-
- /* Wait until Transmit-Holding-Register is empty */
- while (1) {
- value = *(wrppmc_uart + 5);
- if (value & 0x20)
- break;
- }
-
- *wrppmc_uart = ch;
-}
-
-void __init wrppmc_early_printk(const char *fmt, ...)
-{
- static char pbuf[256] = {'\0', };
- char *ch = pbuf;
- va_list args;
- unsigned int i;
-
- memset(pbuf, 0, 256);
- va_start(args, fmt);
- i = vsprintf(pbuf, fmt, args);
- va_end(args);
-
- /* Print the string */
- while (*ch != '\0') {
- wrppmc_early_putc(*ch);
- /* if print '\n', also print '\r' */
- if (*ch++ == '\n')
- wrppmc_early_putc('\r');
- }
-}
-#endif /* WRPPMC_EARLY_DEBUG */
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void __init plat_mem_setup(void)
-{
- extern void wrppmc_machine_restart(char *command);
- extern void wrppmc_machine_halt(void);
-
- _machine_restart = wrppmc_machine_restart;
- _machine_halt = wrppmc_machine_halt;
- pm_power_off = wrppmc_machine_halt;
-
- /* This makes the operations of 'in/out[bwl]' to the
- * physical address ( < KSEG0) can work via KSEG1
- */
- set_io_port_base(KSEG1);
-}
-
-const char *get_system_type(void)
-{
- return "Wind River PPMC (GT64120)";
-}
-
-/*
- * Initializes basic routines and structures pointers, memory size (as
- * given by the bios and saves the command line.
- */
-void __init prom_init(void)
-{
- add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM);
- add_memory_region(WRPPMC_BOOTROM_BASE, WRPPMC_BOOTROM_SIZE, BOOT_MEM_ROM_DATA);
-
- wrppmc_early_printk("prom_init: GT64120 SDRAM Bank 0: 0x%x - 0x%08lx\n",
- WRPPMC_SDRAM_SCS0_BASE, (WRPPMC_SDRAM_SCS0_BASE + WRPPMC_SDRAM_SCS0_SIZE));
-}
diff --git a/arch/mips/wrppmc/time.c b/arch/mips/wrppmc/time.c
deleted file mode 100644
index 668dbd5f12c5..000000000000
--- a/arch/mips/wrppmc/time.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * time.c: MIPS CPU Count/Compare timer hookup
- *
- * Author: Mark.Zhan, <rongkai.zhan@windriver.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2006, Wind River System Inc.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/gt64120.h>
-#include <asm/time.h>
-
-#define WRPPMC_CPU_CLK_FREQ 40000000 /* 40MHZ */
-
-/*
- * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect
- *
- * NOTE: We disable all GT64120 timers, and use MIPS processor internal
- * timer as the source of kernel clock tick.
- */
-void __init plat_time_init(void)
-{
- /* Disable GT64120 timers */
- GT_WRITE(GT_TC_CONTROL_OFS, 0x00);
- GT_WRITE(GT_TC0_OFS, 0x00);
- GT_WRITE(GT_TC1_OFS, 0x00);
- GT_WRITE(GT_TC2_OFS, 0x00);
- GT_WRITE(GT_TC3_OFS, 0x00);
-
- /* Use MIPS compare/count internal timer */
- mips_hpt_frequency = WRPPMC_CPU_CLK_FREQ;
-}