Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

  EFI fixes, a build fix, a page table dumping (debug) fix and a clang
  build fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm64: Fix fdt-related memory reservation
  x86/mm: Apply the section attribute to the variable, not its type
  x86/efi: Fixup GOT in all boot code paths
  x86/efi: Only load initrd above 4g on second try
  x86-64, ptdump: Mark espfix area only if existent
  x86, irq: Fix build error caused by 9eabc99a635a77cbf09

7 files changed, 99 insertions, 39 deletions

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 5472c2401876..a83061f37e43 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -149,8 +149,7 @@ void __init arm64_memblock_init(void)
 		memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start);
 #endif
 
-	if (!efi_enabled(EFI_MEMMAP))
-		early_init_fdt_scan_reserved_mem();
+	early_init_fdt_scan_reserved_mem();
 
 	/* 4GB maximum for 32-bit only capable devices */
 	if (IS_ENABLED(CONFIG_ZONE_DMA))
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index f277184e2ac1..dca9842d8f91 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -1032,7 +1032,6 @@ struct boot_params *make_boot_params(struct efi_config *c)
 	int i;
 	unsigned long ramdisk_addr;
 	unsigned long ramdisk_size;
-	unsigned long initrd_addr_max;
 
 	efi_early = c;
 	sys_table = (efi_system_table_t *)(unsigned long)efi_early->table;
@@ -1095,15 +1094,20 @@ struct boot_params *make_boot_params(struct efi_config *c)
 
 	memset(sdt, 0, sizeof(*sdt));
 
-	if (hdr->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G)
-		initrd_addr_max = -1UL;
-	else
-		initrd_addr_max = hdr->initrd_addr_max;
-
 	status = handle_cmdline_files(sys_table, image,
 				      (char *)(unsigned long)hdr->cmd_line_ptr,
-				      "initrd=", initrd_addr_max,
+				      "initrd=", hdr->initrd_addr_max,
 				      &ramdisk_addr, &ramdisk_size);
+
+	if (status != EFI_SUCCESS &&
+	    hdr->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G) {
+		efi_printk(sys_table, "Trying to load files to higher address\n");
+		status = handle_cmdline_files(sys_table, image,
+				      (char *)(unsigned long)hdr->cmd_line_ptr,
+				      "initrd=", -1UL,
+				      &ramdisk_addr, &ramdisk_size);
+	}
+
 	if (status != EFI_SUCCESS)
 		goto fail2;
 	hdr->ramdisk_image = ramdisk_addr & 0xffffffff;
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index cbed1407a5cd..d6b8aa4c986c 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -30,6 +30,33 @@
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
+/*
+ * Adjust our own GOT
+ *
+ * The relocation base must be in %ebx
+ *
+ * It is safe to call this macro more than once, because in some of the
+ * code paths multiple invocations are inevitable, e.g. via the efi*
+ * entry points.
+ *
+ * Relocation is only performed the first time.
+ */
+.macro FIXUP_GOT
+	cmpb	$1, got_fixed(%ebx)
+	je	2f
+
+	leal	_got(%ebx), %edx
+	leal	_egot(%ebx), %ecx
+1:
+	cmpl	%ecx, %edx
+	jae	2f
+	addl	%ebx, (%edx)
+	addl	$4, %edx
+	jmp	1b
+2:
+	movb	$1, got_fixed(%ebx)
+.endm
+
 	__HEAD
 ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB
@@ -56,6 +83,9 @@ ENTRY(efi_pe_entry)
 	add	%esi, 88(%eax)
 	pushl	%eax
 
+	movl	%esi, %ebx
+	FIXUP_GOT
+
 	call	make_boot_params
 	cmpl	$0, %eax
 	je	fail
@@ -81,6 +111,10 @@ ENTRY(efi32_stub_entry)
 	leal	efi32_config(%esi), %eax
 	add	%esi, 88(%eax)
 	pushl	%eax
+
+	movl	%esi, %ebx
+	FIXUP_GOT
+
 2:
 	call	efi_main
 	cmpl	$0, %eax
@@ -190,19 +224,7 @@ relocated:
 	shrl	$2, %ecx
 	rep	stosl
 
-/*
- * Adjust our own GOT
- */
-	leal	_got(%ebx), %edx
-	leal	_egot(%ebx), %ecx
-1:
-	cmpl	%ecx, %edx
-	jae	2f
-	addl	%ebx, (%edx)
-	addl	$4, %edx
-	jmp	1b
-2:
-
+	FIXUP_GOT
 /*
  * Do the decompression, and jump to the new kernel..
  */
@@ -225,8 +247,12 @@ relocated:
 	xorl	%ebx, %ebx
 	jmp	*%eax
 
-#ifdef CONFIG_EFI_STUB
 	.data
+/* Have we relocated the GOT? */
+got_fixed:
+	.byte 0
+
+#ifdef CONFIG_EFI_STUB
 efi32_config:
 	.fill 11,8,0
 	.long efi_call_phys
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 2884e0c3e8a5..50f69c7eaaf4 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -32,6 +32,33 @@
 #include <asm/processor-flags.h>
 #include <asm/asm-offsets.h>
 
+/*
+ * Adjust our own GOT
+ *
+ * The relocation base must be in %rbx
+ *
+ * It is safe to call this macro more than once, because in some of the
+ * code paths multiple invocations are inevitable, e.g. via the efi*
+ * entry points.
+ *
+ * Relocation is only performed the first time.
+ */
+.macro FIXUP_GOT
+	cmpb	$1, got_fixed(%rip)
+	je	2f
+
+	leaq	_got(%rip), %rdx
+	leaq	_egot(%rip), %rcx
+1:
+	cmpq	%rcx, %rdx
+	jae	2f
+	addq	%rbx, (%rdx)
+	addq	$8, %rdx
+	jmp	1b
+2:
+	movb	$1, got_fixed(%rip)
+.endm
+
 	__HEAD
 	.code32
 ENTRY(startup_32)
@@ -252,10 +279,13 @@ ENTRY(efi_pe_entry)
 	subq	$1b, %rbp
 
 	/*
-	 * Relocate efi_config->call().
+	 * Relocate efi_config->call() and the GOT entries.
 	 */
 	addq	%rbp, efi64_config+88(%rip)
 
+	movq	%rbp, %rbx
+	FIXUP_GOT
+
 	movq	%rax, %rdi
 	call	make_boot_params
 	cmpq	$0,%rax
@@ -271,10 +301,13 @@ handover_entry:
 	subq	$1b, %rbp
 
 	/*
-	 * Relocate efi_config->call().
+	 * Relocate efi_config->call() and the GOT entries.
 	 */
 	movq	efi_config(%rip), %rax
 	addq	%rbp, 88(%rax)
+
+	movq	%rbp, %rbx
+	FIXUP_GOT
 2:
 	movq	efi_config(%rip), %rdi
 	call	efi_main
@@ -385,19 +418,8 @@ relocated:
 	shrq	$3, %rcx
 	rep	stosq
 
-/*
- * Adjust our own GOT
- */
-	leaq	_got(%rip), %rdx
-	leaq	_egot(%rip), %rcx
-1:
-	cmpq	%rcx, %rdx
-	jae	2f
-	addq	%rbx, (%rdx)
-	addq	$8, %rdx
-	jmp	1b
-2:
-	
+	FIXUP_GOT
+
 /*
  * Do the decompression, and jump to the new kernel..
  */
@@ -437,6 +459,10 @@ gdt:
 	.quad   0x0000000000000000	/* TS continued */
 gdt_end:
 
+/* Have we relocated the GOT? */
+got_fixed:
+	.byte	0
+
 #ifdef CONFIG_EFI_STUB
 efi_config:
 	.quad	0
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 478c490f3654..1733ab49ac5e 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -239,6 +239,7 @@ static inline int mp_find_ioapic(u32 gsi) { return 0; }
 static inline u32 mp_pin_to_gsi(int ioapic, int pin) { return UINT_MAX; }
 static inline int mp_map_gsi_to_irq(u32 gsi, unsigned int flags) { return gsi; }
 static inline void mp_unmap_irq(int irq) { }
+static inline bool mp_should_keep_irq(struct device *dev) { return 1; }
 
 static inline int save_ioapic_entries(void)
 {
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 167ffcac16ed..95a427e57887 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -48,7 +48,9 @@ enum address_markers_idx {
 	LOW_KERNEL_NR,
 	VMALLOC_START_NR,
 	VMEMMAP_START_NR,
+# ifdef CONFIG_X86_ESPFIX64
 	ESPFIX_START_NR,
+# endif
 	HIGH_KERNEL_NR,
 	MODULES_VADDR_NR,
 	MODULES_END_NR,
@@ -71,7 +73,9 @@ static struct addr_marker address_markers[] = {
 	{ PAGE_OFFSET,		"Low Kernel Mapping" },
 	{ VMALLOC_START,        "vmalloc() Area" },
 	{ VMEMMAP_START,        "Vmemmap" },
+# ifdef CONFIG_X86_ESPFIX64
 	{ ESPFIX_BASE_ADDR,	"ESPfix Area", 16 },
+# endif
 	{ __START_KERNEL_map,   "High Kernel Mapping" },
 	{ MODULES_VADDR,        "Modules" },
 	{ MODULES_END,          "End Modules" },
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 25e7e1372bb2..919b91205cd4 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -31,7 +31,7 @@
 #include <linux/sched.h>
 #include <asm/elf.h>
 
-struct __read_mostly va_alignment va_align = {
+struct va_alignment __read_mostly va_align = {
 	.flags = -1,
 };