Merge branch 'for-next' into for-linus

Conflicts:

	kernel/irq/chip.c

88 files changed, 114 insertions, 172 deletions

diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 10b403554b65..7b2c56d8f930 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -197,7 +197,7 @@ setup_memory_node(int nid, void *kernel_end)
 	}
 
 	if (bootmap_start == -1)
-		panic("couldn't find a contigous place for the bootmap");
+		panic("couldn't find a contiguous place for the bootmap");
 
 	/* Allocate the bootmap and mark the whole MM as reserved.  */
 	bootmap_size = init_bootmem_node(NODE_DATA(nid), bootmap_start,
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 7713a08bb10c..37bda5f3dde3 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -82,7 +82,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
 
-	/* XXX: I'm usure,  but it seems so */
+	/* XXX: I'm unsure, but it seems so */
 	return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
 }
 
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
index e5f60bf5a1f3..56654d23c3d7 100644
--- a/arch/arm/mach-bcmring/include/csp/reg.h
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -16,7 +16,7 @@
 /**
 *  @file    reg.h
 *
-*  @brief   Generic register defintions used in CSP
+*  @brief   Generic register definitions used in CSP
 */
 /****************************************************************************/
 
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index 375066ad0186..cbf334d1c761 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -83,7 +83,7 @@ typedef struct {
 *  @brief   Get next available transaction width
 *
 *
-*  @return  On sucess  : Next avail able transaction width
+*  @return  On success  : Next available transaction width
 *           On failure : dmacHw_TRANSACTION_WIDTH_8
 *
 *  @note
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
index 86bb58d4f58c..ad58cf873377 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -16,7 +16,7 @@
 /**
 *  @file    mm_addr.h
 *
-*  @brief   Memory Map address defintions
+*  @brief   Memory Map address definitions
 *
 *  @note
 *     None
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 847980c85c88..1f2c5319c056 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about t
 /**
 *   Creates a descriptor ring from a memory mapping.
 *
-*   @return 0 on sucess, error code otherwise.
+*   @return 0 on success, error code otherwise.
 */
 /****************************************************************************/
 
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
index 48e827d2fa56..59d2ace35217 100644
--- a/arch/arm/mach-lh7a40x/include/mach/hardware.h
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -31,7 +31,7 @@
 /*
  * This __REG() version gives the same results as the one above,  except
  * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
+ * assembly code for access to contiguous registers.  It's a shame that gcc
  * doesn't guess this by itself.
  */
 #include <asm/types.h>
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 36dc5413cc97..bdf96eb523bc 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -463,7 +463,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
 	writel(win_enable, PCI_BAR_ENABLE);
 
 	/*
-	 * Disable automatic update of address remaping when writing to BARs.
+	 * Disable automatic update of address remapping when writing to BARs.
 	 */
 	orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
 }
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 8721b8010221..ae536e86d8e8 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -91,7 +91,7 @@
 /* BATTERY */
 #define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
 #define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMLD_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index d15662aba008..6baf7469d4ec 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -66,7 +66,7 @@
 /* BATTERY */
 #define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMT5_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3dc9b074ab46..3f9dd3fd4638 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -68,7 +68,7 @@
 /* BATTERY */
 #define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
 #define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTC_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h
index 12361341f9d8..f89e989a7637 100644
--- a/arch/arm/mach-pxa/include/mach/palmte2.h
+++ b/arch/arm/mach-pxa/include/mach/palmte2.h
@@ -59,7 +59,7 @@
 /* BATTERY */
 #define PALMTE2_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMTE2_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTE2_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMTE2_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMTE2_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMTE2_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1be0db6ed55e..10abc4f2e8e4 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -94,7 +94,7 @@
 /* BATTERY */
 #define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTX_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2806ef69ba5a..2bbcf70dd935 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -49,7 +49,7 @@
 /* Battery */
 #define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMZ72_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig
index deab0722836e..fdd8f5e96faf 100644
--- a/arch/arm/mach-s3c2400/Kconfig
+++ b/arch/arm/mach-s3c2400/Kconfig
@@ -1,13 +1,7 @@
-# arch/arm/mach-s3c2400/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
 
-
-
 menu "S3C2400 Machines"
 
-
 endmenu
-
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3d4e9da3fa52..7fcbdb923d79 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2410/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2bdc4635d12..9a8c0657ae50 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2412/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -90,6 +88,4 @@ config MACH_VSTMS
 	help
 	  Say Y here if you are using an VSTMS board
 
-
 endmenu
-
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a8b69d77571b..ce7bfe4dde22 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2440/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -109,4 +107,3 @@ config MACH_MINI2440
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
 
 endmenu
-
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 103e913f2258..8d3811852fc7 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2442/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -36,6 +34,4 @@ config MACH_NEO1973_GTA02
 	help
 	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 
-
 endmenu
-
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 212141baebec..4314c4424909 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2443/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 770b72067e3d..a250bf68709f 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6400/Kconfig
-#
 # Copyright 2008 Openmoko, Inc.
 #	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
 #
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
index b93dafbee1f4..1039937403be 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
 	[2] = "mmc_bus",
-	/* [3] = "48m", - note not succesfully used yet */
+	/* [3] = "48m", - note not successfully used yet */
 };
 
 void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 72d4b11b2077..162f4561f80f 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6410/Kconfig
-#
 # Copyright 2008 Openmoko, Inc.
 # Copyright 2008 Simtec Electronics
 #
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 20666f3bd478..816d2d9f9ef8 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
 	[2] = "mmc_bus",
-	/* [3] = "48m", - note not succesfully used yet */
+	/* [3] = "48m", - note not successfully used yet */
 };
 
 
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index b1a4ba504416..0793b9bb1c36 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s5pc100/Kconfig
-#
 # Copyright 2009 Samsung Electronics Co.
 #	Byungho Min <bhmin@samsung.com>
 #
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index cb4521a6f42d..ad660350c296 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -65,7 +65,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 
 
 /**
- *	sa1100_request_dma - allocate one of the SA11x0's DMA chanels
+ *	sa1100_request_dma - allocate one of the SA11x0's DMA channels
  *	@device: The SA11x0 peripheral targeted by this request
  *	@device_id: An ascii name for the claiming device
  *	@callback: Function to be called when the DMA completes
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 88333dfb19fc..56721a0cd2af 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -6,7 +6,7 @@
  * Copyright (C) 2006-2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * Basic register address definitions in physical memory and
- * some block defintions for core devices like the timer.
+ * some block definitions for core devices like the timer.
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 446f86763816..0c7802bbeccb 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -112,7 +112,7 @@ enum iomux_gp_func {
  * setups a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
 int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
 /*
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 9f13061192c8..3887f3fe29d4 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -48,7 +48,7 @@
  * setups a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
 int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
 /*
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 5cdbd605ac05..4ff6dfe04283 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -94,7 +94,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 		 * register to follow the ratio of duty_ns vs. period_ns
 		 * accordingly.
 		 *
-		 * This is good enought for programming the brightness of
+		 * This is good enough for programming the brightness of
 		 * the LCD backlight.
 		 *
 		 * The real implementation would divide PERCLK[0] first by
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 68eaae324b6a..b5d786d4573b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1246,7 +1246,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  * 					      OMAP_DMA_DYNAMIC_CHAIN
  * @params - Channel parameters
  *
- * @return - Succes : 0
+ * @return - Success : 0
  * 	     Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index 0e69b504c25f..7560b4d583a3 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -124,7 +124,7 @@
 #define TIPB_SWITCH_BASE		 (0xfffbc800)
 #define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
 
-/* UART3 Registers Maping through MPU bus */
+/* UART3 Registers Mapping through MPU bus */
 #define UART3_RHR               (OMAP_UART3_BASE + 0)
 #define UART3_THR               (OMAP_UART3_BASE + 0)
 #define UART3_DLL               (OMAP_UART3_BASE + 0)
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 8931c5f0e46b..ed2096681450 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c7aca489643..c057e2df3afd 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c24xx/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index c4d133436fc7..bd534d32b993 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -64,7 +64,7 @@
 /* the calculation for the VA of this must ensure that
  * it is the same distance apart from the UART in the
  * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
+ * is done as a 1:1 mapping. This puts it (currently) at
  * 0xFA800000, which is not in the way of any current mapping
  * by the base system.
 */
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index bcfa778614d8..e6da87a5885c 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c64xx/Kconfig
-#
 # Copyright 2008 Openmoko, Inc.
 # Copyright 2008 Simtec Electronics
 #	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index a8a711c3c064..b15f2d25a68f 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s5pc1xx/Kconfig
-#
 # Copyright 2009 Samsung Electronics Co.
 #	Byungho Min <bhmin@samsung.com>
 #
diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig
index fda2331f9789..5c13d785cc70 100644
--- a/arch/avr32/boards/hammerhead/Kconfig
+++ b/arch/avr32/boards/hammerhead/Kconfig
@@ -24,7 +24,7 @@ config BOARD_HAMMERHEAD_SND
 	bool "Atmel AC97 Sound support"
 	help
 	  This enables Sound support for the Hammerhead board. You may
-	  also go trough the ALSA settings to get it working.
+	  also go through the ALSA settings to get it working.
 
 	  Choose 'Y' here if you have ordered a Corona daugther board and
 	  want to make your board funky.
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 6b7325d634af..78cb3d38f899 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -619,7 +619,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 
 /*
  * Similar to get_user, do some address checking, then dereference
- * Return true on sucess, false on bad address
+ * Return true on success, false on bad address
  */
 static bool get_instruction(unsigned short *val, unsigned short *address)
 {
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index e06f4112c695..f9fd2b2a2956 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -542,7 +542,7 @@
 #define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register					*/
 #define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register				*/
 #define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register				*/
-#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshhold Register		*/
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register		*/
 #define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register	*/
 #define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register				*/
 #define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register				*/
@@ -550,7 +550,7 @@
 #define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register					*/
 #define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register				*/
 #define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register				*/
-#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshhold Register		*/
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register		*/
 #define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register	*/
 #define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register				*/
 #define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register				*/
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index f821700716ee..b9dbb73d7ef0 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -544,7 +544,7 @@
 #define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register					*/
 #define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register				*/
 #define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register				*/
-#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshhold Register		*/
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register		*/
 #define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register	*/
 #define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register				*/
 #define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register				*/
@@ -552,7 +552,7 @@
 #define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register					*/
 #define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register				*/
 #define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register				*/
-#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshhold Register		*/
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register		*/
 #define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register	*/
 #define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register				*/
 #define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register				*/
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index cebb14feb1ba..a6d20ca57683 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -934,7 +934,7 @@
 #define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register                                     */
 #define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register                           */
 #define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register                          */
-#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshhold Register         */
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register         */
 #define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register        */
 #define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register                           */
 #define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register                          */
@@ -942,7 +942,7 @@
 #define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register                                     */
 #define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register                           */
 #define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register                          */
-#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshhold Register         */
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register         */
 #define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register        */
 #define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register                           */
 #define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register                          */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index dd414ae4ba4c..39f588dcd382 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -491,7 +491,7 @@
 #define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
 #define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
 #define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
 #define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
 #define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
 #define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
@@ -501,7 +501,7 @@
 #define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
 #define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
 #define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
 #define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
 #define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
 #define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 5a9dbabe0a68..c4dcf302d9f5 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -470,7 +470,7 @@
 #define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
 #define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
 #define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
 #define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
 #define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
 #define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
@@ -480,7 +480,7 @@
 #define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
 #define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
 #define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
 #define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
 #define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
 #define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index 82cd593f7391..a5079980968c 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -853,7 +853,7 @@
 #define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
 #define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
 #define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
 #define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
 #define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
 #define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
@@ -863,7 +863,7 @@
 #define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
 #define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
 #define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
 #define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
 #define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
 #define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index 6fc6e39ab61b..f7f043560c6f 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -1024,7 +1024,7 @@
 #define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
 #define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
 #define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
 #define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
 #define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
 #define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
@@ -1034,7 +1034,7 @@
 #define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
 #define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
 #define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
 #define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
 #define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
 #define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c
index 087a2096f221..ed60588f8467 100644
--- a/arch/cris/arch-v10/mm/fault.c
+++ b/arch/cris/arch-v10/mm/fault.c
@@ -80,8 +80,7 @@ handle_mmu_bus_fault(struct pt_regs *regs)
 	 * do_page_fault may have flushed the TLB so we have to restore
 	 * the MMU registers.
 	 */
-	local_save_flags(flags);
-	local_irq_disable();
+	local_irq_save(flags);
 	pmd = (pmd_t *)(pgd + pgd_index(address));
 	if (pmd_none(*pmd))
 		goto exit;
diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c
index 4a496e4ffacc..21d78c599bab 100644
--- a/arch/cris/arch-v10/mm/tlb.c
+++ b/arch/cris/arch-v10/mm/tlb.c
@@ -134,28 +134,6 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 	local_irq_restore(flags);
 }
 
-/* dump the entire TLB for debug purposes */
-
-#if 0
-void
-dump_tlb_all(void)
-{
-	int i;
-	unsigned long flags;
-
-	printk("TLB dump. LO is: pfn | reserved | global | valid | kernel | we  |\n");
-
-	local_save_flags(flags);
-	local_irq_disable();
-	for(i = 0; i < NUM_TLB_ENTRIES; i++) {
-		*R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) );
-		printk("Entry %d: HI 0x%08lx, LO 0x%08lx\n",
-		       i, *R_TLB_HI, *R_TLB_LO);
-	}
-	local_irq_restore(flags);
-}
-#endif
-
 /*
  * Initialize the context related info for a new mm_struct
  * instance.
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 4a7cdd9ea1ee..380df1a73a6e 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -209,7 +209,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	/* Are we prepared to handle this kernel fault?
 	 *
 	 * (The kernel has valid exception-points in the source
-	 *  when it acesses user-memory. When it fails in one
+	 *  when it accesses user-memory. When it fails in one
 	 *  of those points, we find it in a table and do a jump
 	 *  to some fixup code that loads an appropriate error
 	 *  code)
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 674a8374c6d9..f332e3fe4237 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1381,7 +1381,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev,
 #endif
 
 			/*
-			** Not virtually contigous.
+			** Not virtually contiguous.
 			** Terminate prev chunk.
 			** Start a new chunk.
 			**
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index af9405cd70e5..02d1fb732951 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -79,7 +79,7 @@ GLOBAL_ENTRY(ia32_ret_from_clone)
 (p6)	br.cond.spnt .ia32_strace_check_retval
 	;;					// prevent RAW on r8
 END(ia32_ret_from_clone)
-	// fall thrugh
+	// fall through
 GLOBAL_ENTRY(ia32_ret_from_syscall)
 	PT_REGS_UNWIND_INFO(0)
 
diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h
index 48822c0811d8..74724b24c2b7 100644
--- a/arch/ia64/include/asm/perfmon_default_smpl.h
+++ b/arch/ia64/include/asm/perfmon_default_smpl.h
@@ -67,7 +67,7 @@ typedef struct {
         unsigned long   ip;                     /* where did the overflow interrupt happened  */
         unsigned long   tstamp;                 /* ar.itc when entering perfmon intr. handler */
 
-        unsigned short  cpu;                    /* cpu on which the overfow occured */
+        unsigned short  cpu;                    /* cpu on which the overflow occured */
         unsigned short  set;                    /* event set active when overflow ocurred   */
         int    		tgid;              	/* thread group id (for NPTL, this is getpid()) */
 } pfm_default_smpl_entry_t;
diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
index 22a6f18a5313..6052422a22b3 100644
--- a/arch/ia64/include/asm/sn/shubio.h
+++ b/arch/ia64/include/asm/sn/shubio.h
@@ -3289,7 +3289,7 @@ typedef ii_icrb0_e_u_t icrbe_t;
 #define IIO_IIDSR_LVL_SHIFT     0
 #define IIO_IIDSR_LVL_MASK      0x000000ff
 
-/* Xtalk timeout threshhold register (IIO_IXTT) */
+/* Xtalk timeout threshold register (IIO_IXTT) */
 #define IXTT_RRSP_TO_SHFT	55	/* read response timeout */
 #define IXTT_RRSP_TO_MASK	(0x1FULL << IXTT_RRSP_TO_SHFT)
 #define IXTT_RRSP_PS_SHFT	32	/* read responsed TO prescalar */
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index d5764a3d74af..b091111270cb 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -84,7 +84,7 @@ static int __init esi_init (void)
 		      case ESI_DESC_ENTRY_POINT:
 			break;
 		      default:
-			printk(KERN_WARNING "Unkown table type %d found in "
+			printk(KERN_WARNING "Unknown table type %d found in "
 			       "ESI table, ignoring rest of table\n", *p);
 			return -ENODEV;
 		}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index f1782705b1f7..b3a1cb3e6b25 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -3523,7 +3523,7 @@ pfm_use_debug_registers(struct task_struct *task)
  * IA64_THREAD_DBG_VALID set. This indicates a task which was
  * able to use the debug registers for debugging purposes via
  * ptrace(). Therefore we know it was not using them for
- * perfmormance monitoring, so we only decrement the number
+ * performance monitoring, so we only decrement the number
  * of "ptraced" debug register users to keep the count up to date
  */
 int
diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S
index 6c1a9a217887..73613b5f1ee5 100644
--- a/arch/m68k/ifpsp060/src/fpsp.S
+++ b/arch/m68k/ifpsp060/src/fpsp.S
@@ -753,7 +753,7 @@ fovfl_ovfl_on:
 
 	bra.l		_real_ovfl
 
-# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
 # we must jump to real_inex().
 fovfl_inex_on:
 
@@ -1015,7 +1015,7 @@ funfl_unfl_on2:
 
 	bra.l		_real_unfl
 
-# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
 # we must jump to real_inex().
 funfl_inex_on:
 
@@ -2963,7 +2963,7 @@ iea_disabled:
 
 	tst.w		%d0			# is instr fmovm?
 	bmi.b		iea_dis_fmovm		# yes
-# instruction is using an extended precision immediate operand. therefore,
+# instruction is using an extended precision immediate operand. Therefore,
 # the total instruction length is 16 bytes.
 iea_dis_immed:
 	mov.l		&0x10,%d0		# 16 bytes of instruction
@@ -9624,7 +9624,7 @@ sok_dnrm:
 	bge.b		sok_norm2		# thank goodness no
 
 # the multiply factor that we're trying to create should be a denorm
-# for the multiply to work. therefore, we're going to actually do a
+# for the multiply to work. Therefore, we're going to actually do a
 # multiply with a denorm which will cause an unimplemented data type
 # exception to be put into the machine which will be caught and corrected
 # later. we don't do this with the DENORMs above because this method
@@ -12216,7 +12216,7 @@ fin_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow or inexact is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fin_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -12746,7 +12746,7 @@ fdiv_zero_load_p:
 
 #
 # The destination was In Range and the source was a ZERO. The result,
-# therefore, is an INF w/ the proper sign.
+# Therefore, is an INF w/ the proper sign.
 # So, determine the sign and return a new INF (w/ the j-bit cleared).
 #
 	global		fdiv_inf_load		# global for fsgldiv
@@ -12996,7 +12996,7 @@ fneg_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fneg_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -13611,7 +13611,7 @@ fabs_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fabs_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -14973,7 +14973,7 @@ fadd_zero_2:
 
 #
 # the ZEROes have opposite signs:
-# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
+# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
 # - -ZERO is returned in the case of RM.
 #
 fadd_zero_2_chk_rm:
@@ -15425,7 +15425,7 @@ fsub_zero_2:
 
 #
 # the ZEROes have the same signs:
-# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
+# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
 # - -ZERO is returned in the case of RM.
 #
 fsub_zero_2_chk_rm:
@@ -15693,7 +15693,7 @@ fsqrt_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fsqrt_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -21000,7 +21000,7 @@ fout_pack_type:
 	tst.l		%d0
 	bne.b		fout_pack_set
 # "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore,
+# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
 # if the mantissa is zero, I will zero the exponent, too.
 # the question now is whether the exponents sign bit is allowed to be non-zero
 # for a zero, also...
@@ -21743,7 +21743,7 @@ denorm_set_stky:
 	rts
 
 #									#
-# dnrm_lp(): normalize exponent/mantissa to specified threshhold	#
+# dnrm_lp(): normalize exponent/mantissa to specified threshold		#
 #									#
 # INPUT:								#
 #	%a0	   : points to the operand to be denormalized		#
@@ -22402,7 +22402,7 @@ unnorm_shift:
 	bgt.b		unnorm_nrm_zero		# yes; denorm only until exp = 0
 
 #
-# exponent would not go < 0. therefore, number stays normalized
+# exponent would not go < 0. Therefore, number stays normalized
 #
 	sub.w		%d0, %d1		# shift exponent value
 	mov.w		FTEMP_EX(%a0), %d0	# load old exponent
diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S
index 51b9f7d879dd..e71ba0ab013c 100644
--- a/arch/m68k/ifpsp060/src/pfpsp.S
+++ b/arch/m68k/ifpsp060/src/pfpsp.S
@@ -752,7 +752,7 @@ fovfl_ovfl_on:
 
 	bra.l		_real_ovfl
 
-# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
 # we must jump to real_inex().
 fovfl_inex_on:
 
@@ -1014,7 +1014,7 @@ funfl_unfl_on2:
 
 	bra.l		_real_unfl
 
-# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
 # we must jump to real_inex().
 funfl_inex_on:
 
@@ -2962,7 +2962,7 @@ iea_disabled:
 
 	tst.w		%d0			# is instr fmovm?
 	bmi.b		iea_dis_fmovm		# yes
-# instruction is using an extended precision immediate operand. therefore,
+# instruction is using an extended precision immediate operand. Therefore,
 # the total instruction length is 16 bytes.
 iea_dis_immed:
 	mov.l		&0x10,%d0		# 16 bytes of instruction
@@ -5865,7 +5865,7 @@ denorm_set_stky:
 	rts
 
 #									#
-# dnrm_lp(): normalize exponent/mantissa to specified threshhold	#
+# dnrm_lp(): normalize exponent/mantissa to specified threshold		#
 #									#
 # INPUT:								#
 #	%a0	   : points to the operand to be denormalized		#
@@ -6524,7 +6524,7 @@ unnorm_shift:
 	bgt.b		unnorm_nrm_zero		# yes; denorm only until exp = 0
 
 #
-# exponent would not go < 0. therefore, number stays normalized
+# exponent would not go < 0. Therefore, number stays normalized
 #
 	sub.w		%d0, %d1		# shift exponent value
 	mov.w		FTEMP_EX(%a0), %d0	# load old exponent
@@ -7901,7 +7901,7 @@ fout_pack_type:
 	tst.l		%d0
 	bne.b		fout_pack_set
 # "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore,
+# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
 # if the mantissa is zero, I will zero the exponent, too.
 # the question now is whether the exponents sign bit is allowed to be non-zero
 # for a zero, also...
@@ -8647,7 +8647,7 @@ fin_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow or inexact is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fin_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -9177,7 +9177,7 @@ fdiv_zero_load_p:
 
 #
 # The destination was In Range and the source was a ZERO. The result,
-# therefore, is an INF w/ the proper sign.
+# Therefore, is an INF w/ the proper sign.
 # So, determine the sign and return a new INF (w/ the j-bit cleared).
 #
 	global		fdiv_inf_load		# global for fsgldiv
@@ -9427,7 +9427,7 @@ fneg_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fneg_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -10042,7 +10042,7 @@ fabs_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fabs_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -11404,7 +11404,7 @@ fadd_zero_2:
 
 #
 # the ZEROes have opposite signs:
-# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
+# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
 # - -ZERO is returned in the case of RM.
 #
 fadd_zero_2_chk_rm:
@@ -11856,7 +11856,7 @@ fsub_zero_2:
 
 #
 # the ZEROes have the same signs:
-# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
+# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
 # - -ZERO is returned in the case of RM.
 #
 fsub_zero_2_chk_rm:
@@ -12124,7 +12124,7 @@ fsqrt_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fsqrt_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
index fb8a06b9ab6a..67e7a78ad96b 100644
--- a/arch/m68k/include/asm/bootinfo.h
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -145,7 +145,7 @@ struct bi_record {
 
     /*
      *  Macintosh hardware profile data - unused, see macintosh.h for
-     *  resonable type values
+     *  reasonable type values
      */
 
 #define BI_MAC_VIA1BASE		0x8010	/* Mac VIA1 base address (always present) */
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index 6a907c58a4bc..cc2108b6b260 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -9,7 +9,7 @@
  * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
  * http://www.embedded.com/showArticle.jhtml?articleID=19205567
  *
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
  * author of this code (Michael Morrow, Intel).  Below is the original
  * copyright notice.
  *
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
index d4e9f49a71f7..0929198c5e68 100644
--- a/arch/microblaze/lib/memmove.c
+++ b/arch/microblaze/lib/memmove.c
@@ -9,7 +9,7 @@
  * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
  * http://www.embedded.com/showArticle.jhtml?articleID=19205567
  *
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
  * author of this code (Michael Morrow, Intel).  Below is the original
  * copyright notice.
  *
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
index 941dc8f94b03..4df851d41a29 100644
--- a/arch/microblaze/lib/memset.c
+++ b/arch/microblaze/lib/memset.c
@@ -9,7 +9,7 @@
  * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
  * http://www.embedded.com/showArticle.jhtml?articleID=19205567
  *
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
  * author of this code (Michael Morrow, Intel).  Below is the original
  * copyright notice.
  *
diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h
index 8de0eb9c98a3..ed3a88da70f6 100644
--- a/arch/mips/include/asm/mach-pnx833x/gpio.h
+++ b/arch/mips/include/asm/mach-pnx833x/gpio.h
@@ -24,7 +24,7 @@
 
 /* BIG FAT WARNING: races danger!
    No protections exist here. Current users are only early init code,
-   when locking is not needed because no cuncurency yet exists there,
+   when locking is not needed because no concurrency yet exists there,
    and GPIO IRQ dispatcher, which does locking.
    However, if many uses will ever happen, proper locking will be needed
    - including locking between different uses
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
index 343ed15f8dc4..57a971904cfe 100644
--- a/arch/mips/include/asm/sgi/ioc.h
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -164,7 +164,7 @@ struct sgioc_regs {
 	u32 _unused5;
 	u8 _write[3];
 	volatile u8 write;
-#define SGIOC_WRITE_NTHRESH	0x01	/* use 4.5db threshhold */
+#define SGIOC_WRITE_NTHRESH	0x01	/* use 4.5db threshold */
 #define SGIOC_WRITE_TPSPEED	0x02	/* use 100ohm TP speed */
 #define SGIOC_WRITE_EPSEL	0x04	/* force cable mode: 1=AUI 0=TP */
 #define SGIOC_WRITE_EASEL	0x08	/* 1=autoselect 0=manual cable selection */
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
index b6faf08ca81d..591b9061fd8e 100644
--- a/arch/mips/include/asm/sibyte/sb1250_mac.h
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -212,7 +212,7 @@
 #define G_MAC_TXD_WEIGHT1(x)        _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1)
 
 /*
- * MAC Fifo Threshhold registers (Table 9-14)
+ * MAC Fifo Threshold registers (Table 9-14)
  * Register: MAC_THRSH_CFG_0
  * Register: MAC_THRSH_CFG_1
  * Register: MAC_THRSH_CFG_2
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
index d0c29d4de084..31c76c021bb6 100644
--- a/arch/mips/include/asm/sn/sn0/hubio.h
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -825,7 +825,7 @@ typedef union iprb_u {
 	struct {
 	    u64	rsvd1:	15,
 		error:	1,	/* Widget rcvd wr resp pkt w/ error */
-		ovflow:	5,	/* Over flow count. perf measurement */
+		ovflow:	5,	/* Overflow count. perf measurement */
 		fire_and_forget: 1, /* Launch Write without response */
 		mode:	2,	/* Widget operation Mode	*/
 		rsvd2:	2,
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 24630fd8ef60..a38e3ee95515 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1331,7 +1331,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 		if (!((asid += ASID_INC) & ASID_MASK) ) {
 			if (cpu_has_vtag_icache)
 				flush_icache_all();
-			/* Traverse all online CPUs (hack requires contigous range) */
+			/* Traverse all online CPUs (hack requires contiguous range) */
 			for_each_online_cpu(i) {
 				/*
 				 * We don't need to worry about our own CPU, nor those of
diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c
index b30c5b1f1a2c..a2127d685a0d 100644
--- a/arch/mips/math-emu/dp_sub.c
+++ b/arch/mips/math-emu/dp_sub.c
@@ -110,7 +110,7 @@ ieee754dp ieee754dp_sub(ieee754dp x, ieee754dp y)
 
 	case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
 		DPDNORMX;
-		/* FAAL THOROUGH */
+		/* FALL THROUGH */
 
 	case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
 		/* normalize ym,ye */
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index a2b2d62d88e3..8ebc3848f3ac 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -117,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
 		smsc_fdc37m81x_config_end();
 	else {
-		printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
+		printk(KERN_WARNING "%s: unknown chip id 0x%02x\n", __func__,
 		       chip_id);
 		g_smsc_fdc37m81x_base = 0;
 	}
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index 75099efb3bf3..f9f6783e4bdd 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -24,7 +24,7 @@
  *
  *  This driver programs the PCX-U/PCX-W performance counters
  *  on the PA-RISC 2.0 chips.  The driver keeps all images now
- *  internally to the kernel to hopefully eliminate the possiblity
+ *  internally to the kernel to hopefully eliminate the possibility
  *  of a bad image halting the CPU.  Also, there are different
  *  images for the PCX-W and later chips vs the PCX-U chips.
  *
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 1e180a594589..0de404dfee8b 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -39,7 +39,7 @@
 #define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
 #define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
 
-#define PMLCB_THRESHMUL_MASK	0x0700	/* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_MASK	0x0700	/* Threshold Multiple Field */
 #define PMLCB_THRESHMUL_SHIFT	8
 
 #define PMLCB_THRESHOLD_MASK	0x003f	/* Threshold Field */
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 641c74bb8e27..b6bd1eaa1c24 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -52,7 +52,7 @@ static struct hard_trap_info
 	{ 0x2030, 0x08 /* SIGFPE */  },		/* spe fp data */
 	{ 0x2040, 0x08 /* SIGFPE */  },		/* spe fp data */
 	{ 0x2050, 0x08 /* SIGFPE */  },		/* spe fp round */
-	{ 0x2060, 0x0e /* SIGILL */  },		/* performace monitor */
+	{ 0x2060, 0x0e /* SIGILL */  },		/* performance monitor */
 	{ 0x2900, 0x08 /* SIGFPE */  },		/* apu unavailable */
 	{ 0x3100, 0x0e /* SIGALRM */ },		/* fixed interval timer */
 	{ 0x3200, 0x02 /* SIGINT */  }, 	/* watchdog */
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index c3a56d65c5a9..a753b72efbc0 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -59,7 +59,7 @@ void set_thresholds(unsigned long cpu)
 	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
 
 	/* setup THRM2,
-	 * threshold, valid bit, enable interrupts, interrupt when above threshhold
+	 * threshold, valid bit, enable interrupts, interrupt when above threshold
 	 */
 	mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
 #else
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 137dc22afa42..d84d19224a95 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -721,7 +721,7 @@ static int __init vdso_init(void)
 
 #ifdef CONFIG_PPC64
 	/*
-	 * Fill up the "systemcfg" stuff for backward compatiblity
+	 * Fill up the "systemcfg" stuff for backward compatibility
 	 */
 	strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64");
 	vdso_data->version.major = SYSTEMCFG_MAJOR;
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index ae06c6236d9c..2c9e52267292 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -248,7 +248,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count)
 	 * There is no debug setup required for the cycles event.
 	 * Note that only events in the same group can be used.
 	 * Otherwise, there will be conflicts in correctly routing
-	 * the signals on the debug bus.  It is the responsiblity
+	 * the signals on the debug bus.  It is the responsibility
 	 * of the OProfile user tool to check the events are in
 	 * the same group.
 	 */
@@ -1594,7 +1594,7 @@ static void cell_handle_interrupt_spu(struct pt_regs *regs,
 		 * to a latch.  The new values (interrupt setting bits, reset
 		 * counter value etc.) are not copied to the actual registers
 		 * until the performance monitor is enabled.  In order to get
-		 * this to work as desired, the permormance monitor needs to
+		 * this to work as desired, the performance monitor needs to
 		 * be disabled while writing to the latches.  This is a
 		 * HW design issue.
 		 */
@@ -1668,7 +1668,7 @@ static void cell_handle_interrupt_ppu(struct pt_regs *regs,
 		 * to a latch.	The new values (interrupt setting bits, reset
 		 * counter value etc.) are not copied to the actual registers
 		 * until the performance monitor is enabled.  In order to get
-		 * this to work as desired, the permormance monitor needs to
+		 * this to work as desired, the performance monitor needs to
 		 * be disabled while writing to the latches.  This is a
 		 * HW design issue.
 		 */
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index dd43114e9684..da110bd88346 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -100,7 +100,7 @@ const struct of_device_id mpc52xx_pci_ids[] __initdata = {
 };
 
 /* ======================================================================== */
-/* PCI configuration acess                                                  */
+/* PCI configuration access                                                 */
 /* ======================================================================== */
 
 static int
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index e81403b245b5..ab2027cdf893 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -302,7 +302,7 @@ static void __init setup_chaos(struct pci_controller *hose,
  *  1 -> Skip the device but act as if the access was successfull
  *       (return 0xff's on reads, eventually, cache config space
  *       accesses in a later version)
- * -1 -> Hide the device (unsuccessful acess)
+ * -1 -> Hide the device (unsuccessful access)
  */
 static int u3_ht_skip_device(struct pci_controller *hose,
 			     struct pci_bus *bus, unsigned int devfn)
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index ae3c4db86fe8..bafc3f85360d 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -160,7 +160,7 @@ static int dart_build(struct iommu_table *tbl, long index,
 
 	dp = ((unsigned int*)tbl->it_base) + index;
 
-	/* On U3, all memory is contigous, so we can move this
+	/* On U3, all memory is contiguous, so we can move this
 	 * out of the loop.
 	 */
 	l = npages;
diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c
index 3ee78ccb617d..cd4e9c168dd7 100644
--- a/arch/s390/math-emu/math.c
+++ b/arch/s390/math-emu/math.c
@@ -2088,7 +2088,7 @@ int math_emu_ldr(__u8 *opcode) {
         __u16 opc = *((__u16 *) opcode);
 
         if ((opc & 0x90) == 0) {           /* test if rx in {0,2,4,6} */
-                /* we got an exception therfore ry can't be in {0,2,4,6} */
+                /* we got an exception therefore ry can't be in {0,2,4,6} */
 		asm volatile(		/* load rx from fp_regs.fprs[ry] */
 			"	bras	1,0f\n"
 			"	ld	0,0(%1)\n"
@@ -2118,7 +2118,7 @@ int math_emu_ler(__u8 *opcode) {
         __u16 opc = *((__u16 *) opcode);
 
         if ((opc & 0x90) == 0) {           /* test if rx in {0,2,4,6} */
-                /* we got an exception therfore ry can't be in {0,2,4,6} */
+                /* we got an exception therefore ry can't be in {0,2,4,6} */
 		asm volatile(		/* load rx from fp_regs.fprs[ry] */
 			"	bras	1,0f\n"
 			"	le	0,0(%1)\n"
diff --git a/arch/sh/include/mach-common/mach/titan.h b/arch/sh/include/mach-common/mach/titan.h
index 03f3583c8918..4a674d27cbb8 100644
--- a/arch/sh/include/mach-common/mach/titan.h
+++ b/arch/sh/include/mach-common/mach/titan.h
@@ -1,5 +1,5 @@
 /*
- * Platform defintions for Titan
+ * Platform definitions for Titan
  */
 #ifndef _ASM_SH_TITAN_H
 #define _ASM_SH_TITAN_H
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index 9d6684849fd9..278441f39856 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -12,9 +12,9 @@
 #include <linux/types.h>
 
 /*
- * FIXME: Acessing the desc_struct through its fields is more elegant,
+ * FIXME: Accessing the desc_struct through its fields is more elegant,
  * and should be the one valid thing to do. However, a lot of open code
- * still touches the a and b acessors, and doing this allow us to do it
+ * still touches the a and b accessors, and doing this allow us to do it
  * incrementally. We keep the signature as a struct, rather than an union,
  * so we can get rid of it transparently in the future -- glommer
  */
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index ede6998bd92c..91df7c51806c 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -47,7 +47,7 @@ static inline void resume_map_numa_kva(pgd_t *pgd) {}
 /*
  * generic node memory support, the following assumptions apply:
  *
- * 1) memory comes in 64Mb contigious chunks which are either present or not
+ * 1) memory comes in 64Mb contiguous chunks which are either present or not
  * 2) we will not have more than 64Gb in total
  *
  * for now assume that 64Gb is max amount of RAM for whole system
diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h
index 72e5a4491661..04459d25e66e 100644
--- a/arch/x86/include/asm/sigcontext.h
+++ b/arch/x86/include/asm/sigcontext.h
@@ -124,7 +124,7 @@ struct sigcontext {
 	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
 	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
 	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
-	 * of extended memory layout. See comments at the defintion of
+	 * of extended memory layout. See comments at the definition of
 	 * (struct _fpx_sw_bytes)
 	 */
 	void __user *fpstate;		/* zero when no FPU/extended context */
@@ -219,7 +219,7 @@ struct sigcontext {
 	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
 	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
 	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
-	 * of extended memory layout. See comments at the defintion of
+	 * of extended memory layout. See comments at the definition of
 	 * (struct _fpx_sw_bytes)
 	 */
 	void __user *fpstate;		/* zero when no FPU/extended context */
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 80e2984f521c..b414d2b401f6 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -55,7 +55,7 @@
 #define DESC_STATUS_SOURCE_TIMEOUT	3
 
 /*
- * source side threshholds at which message retries print a warning
+ * source side thresholds at which message retries print a warning
  */
 #define SOURCE_TIMEOUT_LIMIT		20
 #define DESTINATION_TIMEOUT_LIMIT	20
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 67e929b89875..1c2c4838d35c 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1122,7 +1122,7 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 	if (!acpi_sci_override_gsi)
 		acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0);
 
-	/* Fill in identity legacy mapings where no override */
+	/* Fill in identity legacy mappings where no override */
 	mp_config_acpi_legacy_irqs();
 
 	count =
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 32fb09102a13..1c0fb4d4ad55 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1783,7 +1783,7 @@ retry:
 			goto out;
 
 		/*
-		 * aperture was sucessfully enlarged by 128 MB, try
+		 * aperture was successfully enlarged by 128 MB, try
 		 * allocation again
 		 */
 		goto retry;
@@ -2490,7 +2490,7 @@ int __init amd_iommu_init_passthrough(void)
 	struct pci_dev *dev = NULL;
 	u16 devid;
 
-	/* allocate passthroug domain */
+	/* allocate passthrough domain */
 	pt_domain = protection_domain_alloc();
 	if (!pt_domain)
 		return -ENOMEM;
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index c1bbed1021d9..ab1a8a89b984 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1286,7 +1286,7 @@ x86_perf_event_set_period(struct perf_event *event,
 		return 0;
 
 	/*
-	 * If we are way outside a reasoable range then just skip forward:
+	 * If we are way outside a reasonable range then just skip forward:
 	 */
 	if (unlikely(left <= -period)) {
 		left = period;
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 1f3186ce213c..5b8c7505b3bc 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -481,7 +481,7 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs,
 
 /*
  * Interrupts are disabled on entry as trap3 is an interrupt gate and they
- * remain disabled thorough out this function.
+ * remain disabled throughout this function.
  */
 static int __kprobes kprobe_handler(struct pt_regs *regs)
 {
@@ -818,7 +818,7 @@ no_change:
 
 /*
  * Interrupts are disabled on entry as trap1 is an interrupt gate and they
- * remain disabled thoroughout this function.
+ * remain disabled throughout this function.
  */
 static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 11a4ad4d6253..07bcc309cfda 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -203,7 +203,7 @@ static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
  */
 /*
  * Interrupts are disabled on entry as trap3 is an interrupt gate
- * and they remain disabled thorough out this function.
+ * and they remain disabled throughout this function.
  */
 int kmmio_handler(struct pt_regs *regs, unsigned long addr)
 {
@@ -302,7 +302,7 @@ no_kmmio:
 
 /*
  * Interrupts are disabled on entry as trap1 is an interrupt gate
- * and they remain disabled thorough out this function.
+ * and they remain disabled throughout this function.
  * This must always get called as the pair to kmmio_handler().
  */
 static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)