[ARM] 3141/1: OMAP 1/5: Update omap1 specific files

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:

- Omap1 serial pport and framebuffer init updates by Imre Deak

- Add support for omap310 processor and Palm Tungsten E PDA
  by Laurent Gonzales, Romain Goyet, et al. Omap310 and
  omap1510 processors are now handled as omap15xx.

- Omap1 specific changes to shared omap clock framework
  by Tony Lindgren

- Omap1 specific changes to shared omap pin mux framework
  by Tony Lindgren

- Other misc fixes, such as update memory timings for smc91x,
  omap1 specific device initialization etc.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

23 files changed, 2157 insertions, 316 deletions

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 27fc2e8e5fca..86a0f0d14345 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -6,10 +6,10 @@ config ARCH_OMAP730
 	bool "OMAP730 Based System"
 	select ARCH_OMAP_OTG
 
-config ARCH_OMAP1510
+config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
 	default y
-	bool "OMAP1510 Based System"
+	bool "OMAP15xx Based System"
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1
@@ -21,7 +21,7 @@ comment "OMAP Board Type"
 
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
@@ -64,20 +64,30 @@ config MACH_OMAP_PERSEUS2
 
 config MACH_VOICEBLUE
 	bool "Voiceblue"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
 	  such a board.
 
 config MACH_NETSTAR
 	bool "NetStar"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for NetStar PBX. Say Y here if you have such a board.
 
+config MACH_OMAP_PALMTE
+	bool "Palm Tungsten E"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+          Support for the Palm Tungsten E PDA. Currently only the LCD panel
+          is supported. To boot the kernel, you'll need a PalmOS compatible
+          bootloader; check out http://palmtelinux.sourceforge.net for more
+          informations.
+          Say Y here if you have such a PDA, say NO otherwise.
+
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
           Support for generic OMAP-1510, 1610 or 1710 board with
           no FPGA. Can be used as template for porting Linux to
@@ -121,32 +131,32 @@ config OMAP_ARM_182MHZ
 
 config OMAP_ARM_168MHZ
 	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 168MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_150MHZ
 	bool "OMAP ARM 150 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Enable 150MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_120MHZ
 	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
         default y
 	help
           Enable 60MHz clock for OMAP CPU. If unsure, say Y.
 
 config OMAP_ARM_30MHZ
 	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 181a93deaaee..b0b00156faae 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o irq.o time.o serial.o devices.o
+obj-y := io.o id.o clock.o irq.o time.o mux.o serial.o devices.o
 led-y := leds.o
 
 # Specific board support
@@ -15,8 +15,9 @@ obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_NETSTAR)		+= board-netstar.o
+obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 
-ifeq ($(CONFIG_ARCH_OMAP1510),y)
+ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
 endif
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c209c7172a9a..4b292e93fbe2 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -15,7 +15,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -28,8 +28,6 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 
-static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static void __init omap_generic_init_irq(void)
 {
 	omap_init_irq();
@@ -37,7 +35,7 @@ static void __init omap_generic_init_irq(void)
 
 /* assume no Mini-AB port */
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_usb_config generic1510_usb_config __initdata = {
 	.register_host	= 1,
 	.register_dev	= 1,
@@ -76,21 +74,19 @@ static struct omap_mmc_config generic_mmc_config __initdata = {
 
 #endif
 
+static struct omap_uart_config generic_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel generic_config[] = {
 	{ OMAP_TAG_USB,           NULL },
 	{ OMAP_TAG_MMC,           &generic_mmc_config },
+	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)
 {
-	const struct omap_uart_config *uart_conf;
-
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
-	 */
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		generic_config[0].data = &generic1510_usb_config;
 	}
@@ -101,20 +97,9 @@ static void __init omap_generic_init(void)
 	}
 #endif
 
-	uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (uart_conf != NULL) {
-		unsigned int enabled_ports, i;
-
-		enabled_ports = uart_conf->enabled_uarts;
-		for (i = 0; i < 3; i++) {
-			if (!(enabled_ports & (1 << i)))
-				generic_serial_ports[i] = 0;
-		}
-	}
-
 	omap_board_config = generic_config;
 	omap_board_config_size = ARRAY_SIZE(generic_config);
-	omap_serial_init(generic_serial_ports);
+	omap_serial_init();
 }
 
 static void __init omap_generic_map_io(void)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 4ee6bd8a50b8..a07e2c9307fa 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -40,8 +40,6 @@
 
 extern int omap_gpio_init(void);
 
-static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition h2_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -160,9 +158,20 @@ static struct omap_mmc_config h2_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config h2_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config h2_lcd_config __initdata = {
+	.panel_name	= "h2",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel h2_config[] = {
 	{ OMAP_TAG_USB,           &h2_usb_config },
 	{ OMAP_TAG_MMC,           &h2_mmc_config },
+	{ OMAP_TAG_UART,	&h2_uart_config },
+	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
 static void __init h2_init(void)
@@ -180,12 +189,12 @@ static void __init h2_init(void)
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 	omap_board_config = h2_config;
 	omap_board_config_size = ARRAY_SIZE(h2_config);
+	omap_serial_init();
 }
 
 static void __init h2_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(h2_serial_ports);
 }
 
 MACHINE_START(OMAP_H2, "TI-H2")
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index fc824361430d..668e278433c2 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -41,8 +41,6 @@
 
 extern int omap_gpio_init(void);
 
-static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition h3_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -168,9 +166,20 @@ static struct omap_mmc_config h3_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config h3_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config h3_lcd_config __initdata = {
+	.panel_name	= "h3",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel h3_config[] = {
-	{ OMAP_TAG_USB,	 &h3_usb_config },
-	{ OMAP_TAG_MMC,  &h3_mmc_config },
+	{ OMAP_TAG_USB,		&h3_usb_config },
+	{ OMAP_TAG_MMC,		&h3_mmc_config },
+	{ OMAP_TAG_UART,	&h3_uart_config },
+	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
 static void __init h3_init(void)
@@ -180,6 +189,7 @@ static void __init h3_init(void)
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 	omap_board_config = h3_config;
 	omap_board_config_size = ARRAY_SIZE(h3_config);
+	omap_serial_init();
 }
 
 static void __init h3_init_smc91x(void)
@@ -201,7 +211,6 @@ void h3_init_irq(void)
 static void __init h3_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(h3_serial_ports);
 }
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index a2eac853b2da..95f1ff36cdcb 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -36,8 +36,6 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/common.h>
 
-static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition innovator_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -99,7 +97,7 @@ static struct platform_device innovator_flash_device = {
 	.resource	= &innovator_flash_resource,
 };
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc innovator1510_io_desc[] __initdata = {
@@ -136,7 +134,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
 	&innovator1510_smc91x_device,
 };
 
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
 
 #ifdef CONFIG_ARCH_OMAP16XX
 
@@ -185,7 +183,7 @@ void innovator_init_irq(void)
 {
 	omap_init_irq();
 	omap_gpio_init();
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1510_fpga_init_irq();
 	}
@@ -193,7 +191,7 @@ void innovator_init_irq(void)
 	innovator_init_smc91x();
 }
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_usb_config innovator1510_usb_config __initdata = {
 	/* for bundled non-standard host and peripheral cables */
 	.hmc_mode	= 4,
@@ -205,6 +203,11 @@ static struct omap_usb_config innovator1510_usb_config __initdata = {
 	.register_dev	= 1,
 	.pins[0]	= 2,
 };
+
+static struct omap_lcd_config innovator1510_lcd_config __initdata = {
+	.panel_name	= "inn1510",
+	.ctrl_name	= "internal",
+};
 #endif
 
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -222,6 +225,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
 
 	.pins[1]	= 3,
 };
+
+static struct omap_lcd_config innovator1610_lcd_config __initdata = {
+	.panel_name	= "inn1610",
+	.ctrl_name	= "internal",
+};
 #endif
 
 static struct omap_mmc_config innovator_mmc_config __initdata = {
@@ -234,14 +242,20 @@ static struct omap_mmc_config innovator_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config innovator_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel innovator_config[] = {
 	{ OMAP_TAG_USB,         NULL },
+	{ OMAP_TAG_LCD,		NULL },
 	{ OMAP_TAG_MMC,		&innovator_mmc_config },
+	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
 
 static void __init innovator_init(void)
 {
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 	}
@@ -252,23 +266,28 @@ static void __init innovator_init(void)
 	}
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
-	if (cpu_is_omap1510())
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (cpu_is_omap1510()) {
 		innovator_config[0].data = &innovator1510_usb_config;
+		innovator_config[1].data = &innovator1510_lcd_config;
+	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
-	if (cpu_is_omap1610())
+	if (cpu_is_omap1610()) {
 		innovator_config[0].data = &h2_usb_config;
+		innovator_config[1].data = &innovator1610_lcd_config;
+	}
 #endif
 	omap_board_config = innovator_config;
 	omap_board_config_size = ARRAY_SIZE(innovator_config);
+	omap_serial_init();
 }
 
 static void __init innovator_map_io(void)
 {
 	omap_map_common_io();
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
 		udelay(10);	/* Delay needed for FPGA */
@@ -280,7 +299,6 @@ static void __init innovator_map_io(void)
 		       fpga_read(OMAP1510_FPGA_BOARD_REV));
 	}
 #endif
-	omap_serial_init(innovator_serial_ports);
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
index c851c2e4dfcb..0448fa7de8a4 100644
--- a/arch/arm/mach-omap1/board-netstar.c
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -55,6 +55,14 @@ static struct platform_device *netstar_devices[] __initdata = {
 	&netstar_smc91x_device,
 };
 
+static struct omap_uart_config netstar_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel netstar_config[] = {
+	{ OMAP_TAG_UART,	&netstar_uart_config },
+};
+
 static void __init netstar_init_irq(void)
 {
 	omap_init_irq();
@@ -92,14 +100,15 @@ static void __init netstar_init(void)
 	/* Switch off red LED */
 	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
 	omap_writeb(0x80, OMAP_LPG1_LCR);
-}
 
-static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+	omap_board_config = netstar_config;
+	omap_board_config_size = ARRAY_SIZE(netstar_config);
+	omap_serial_init();
+}
 
 static void __init netstar_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(omap_serial_ports);
 }
 
 #define MACHINE_PANICED		1
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a88524e7c315..e990e1bc1669 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -46,8 +46,6 @@
 #include <asm/arch/tc.h>
 #include <asm/arch/common.h>
 
-static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
-
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -155,7 +153,7 @@ static void __init osk_init_smc91x(void)
 	}
 
 	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
-	EMIFS_CCS(1) |= 0x2;
+	EMIFS_CCS(1) |= 0x3;
 }
 
 static void __init osk_init_cf(void)
@@ -193,8 +191,19 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
+static struct omap_uart_config osk_uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static struct omap_lcd_config osk_lcd_config __initdata = {
+	.panel_name	= "osk",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel osk_config[] = {
 	{ OMAP_TAG_USB,           &osk_usb_config },
+	{ OMAP_TAG_UART,		&osk_uart_config },
+	{ OMAP_TAG_LCD,			&osk_lcd_config },
 };
 
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
@@ -254,13 +263,13 @@ static void __init osk_init(void)
 	omap_board_config_size = ARRAY_SIZE(osk_config);
 	USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
 
+	omap_serial_init();
 	osk_mistral_init();
 }
 
 static void __init osk_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(osk_serial_ports);
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
new file mode 100644
index 000000000000..540b20d78cca
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -0,0 +1,87 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmte.c
+ *
+ * Modified from board-generic.c
+ *
+ * Support for the Palm Tungsten E PDA.
+ *
+ * Original version : Laurent Gonzalez
+ *
+ * Maintainters : http://palmtelinux.sf.net
+ *                palmtelinux-developpers@lists.sf.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/hardware/clock.h>
+
+static void __init omap_generic_init_irq(void)
+{
+	omap_init_irq();
+}
+
+static struct omap_usb_config palmte_usb_config __initdata = {
+	.register_dev	= 1,
+	.hmc_mode	= 0,
+	.pins[0]	= 3,
+};
+
+static struct omap_mmc_config palmte_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 1,
+		.wire4		= 1,
+		.wp_pin		= OMAP_MPUIO(3),
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_lcd_config palmte_lcd_config __initdata = {
+	.panel_name	= "palmte",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel palmte_config[] = {
+	{ OMAP_TAG_USB, &palmte_usb_config },
+	{ OMAP_TAG_MMC,	&palmte_mmc_config },
+	{ OMAP_TAG_LCD,	&palmte_lcd_config },
+};
+
+static void __init omap_generic_init(void)
+{
+	omap_board_config = palmte_config;
+	omap_board_config_size = ARRAY_SIZE(palmte_config);
+}
+
+static void __init omap_generic_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_generic_map_io,
+	.init_irq	= omap_generic_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 354b157acb3a..bd900b7ab33c 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -29,6 +29,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/common.h>
+#include <asm/arch/board.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -43,8 +44,6 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
-static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0};
-
 static struct mtd_partition p2_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -111,9 +110,27 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 };
 
+static struct omap_uart_config perseus2_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1)),
+};
+
+static struct omap_lcd_config perseus2_lcd_config __initdata = {
+	.panel_name	= "p2",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel perseus2_config[] = {
+	{ OMAP_TAG_UART,	&perseus2_uart_config },
+	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
+};
+
 static void __init omap_perseus2_init(void)
 {
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	omap_board_config = perseus2_config;
+	omap_board_config_size = ARRAY_SIZE(perseus2_config);
+	omap_serial_init();
 }
 
 static void __init perseus2_init_smc91x(void)
@@ -131,7 +148,6 @@ void omap_perseus2_init_irq(void)
 	omap_gpio_init();
 	perseus2_init_smc91x();
 }
-
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
 	{
@@ -179,7 +195,6 @@ static void __init omap_perseus2_map_io(void)
 	 * It is used as the Ethernet controller interrupt
 	 */
 	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
-	omap_serial_init(p2_serial_ports);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 3f018b296861..6f9a6220e78a 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -150,9 +150,14 @@ static struct omap_mmc_config voiceblue_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config voiceblue_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel voiceblue_config[] = {
 	{ OMAP_TAG_USB, &voiceblue_usb_config },
 	{ OMAP_TAG_MMC, &voiceblue_mmc_config },
+	{ OMAP_TAG_UART,	&voiceblue_uart_config },
 };
 
 static void __init voiceblue_init_irq(void)
@@ -191,6 +196,7 @@ static void __init voiceblue_init(void)
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+	omap_serial_init();
 
 	/* There is a good chance board is going up, so enable power LED
 	 * (it is connected through invertor) */
@@ -198,12 +204,9 @@ static void __init voiceblue_init(void)
 	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
 }
 
-static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static void __init voiceblue_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(omap_serial_ports);
 }
 
 #define MACHINE_PANICED		1
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
new file mode 100644
index 000000000000..4277eee44ed5
--- /dev/null
+++ b/arch/arm/mach-omap1/clock.c
@@ -0,0 +1,792 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock.c
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ *  Modified to use omap shared clock framework by
+ *  Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/usb.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+
+#include "clock.h"
+
+__u32 arm_idlect1_mask;
+
+/*-------------------------------------------------------------------------
+ * Omap1 specific clock functions
+ *-------------------------------------------------------------------------*/
+
+static void omap1_watchdog_recalc(struct clk * clk)
+{
+	clk->rate = clk->parent->rate / 14;
+}
+
+static void omap1_uart_recalc(struct clk * clk)
+{
+	unsigned int val = omap_readl(clk->enable_reg);
+	if (val & clk->enable_bit)
+		clk->rate = 48000000;
+	else
+		clk->rate = 12000000;
+}
+
+static int omap1_clk_enable_dsp_domain(struct clk *clk)
+{
+	int retval;
+
+	retval = omap1_clk_use(&api_ck.clk);
+	if (!retval) {
+		retval = omap1_clk_enable(clk);
+		omap1_clk_unuse(&api_ck.clk);
+	}
+
+	return retval;
+}
+
+static void omap1_clk_disable_dsp_domain(struct clk *clk)
+{
+	if (omap1_clk_use(&api_ck.clk) == 0) {
+		omap1_clk_disable(clk);
+		omap1_clk_unuse(&api_ck.clk);
+	}
+}
+
+static int omap1_clk_enable_uart_functional(struct clk *clk)
+{
+	int ret;
+	struct uart_clk *uclk;
+
+	ret = omap1_clk_enable(clk);
+	if (ret == 0) {
+		/* Set smart idle acknowledgement mode */
+		uclk = (struct uart_clk *)clk;
+		omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
+			    uclk->sysc_addr);
+	}
+
+	return ret;
+}
+
+static void omap1_clk_disable_uart_functional(struct clk *clk)
+{
+	struct uart_clk *uclk;
+
+	/* Set force idle acknowledgement mode */
+	uclk = (struct uart_clk *)clk;
+	omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
+
+	omap1_clk_disable(clk);
+}
+
+static void omap1_clk_allow_idle(struct clk *clk)
+{
+	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
+
+	if (!(clk->flags & CLOCK_IDLE_CONTROL))
+		return;
+
+	if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count))
+		arm_idlect1_mask |= 1 << iclk->idlect_shift;
+}
+
+static void omap1_clk_deny_idle(struct clk *clk)
+{
+	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
+
+	if (!(clk->flags & CLOCK_IDLE_CONTROL))
+		return;
+
+	if (iclk->no_idle_count++ == 0)
+		arm_idlect1_mask &= ~(1 << iclk->idlect_shift);
+}
+
+static __u16 verify_ckctl_value(__u16 newval)
+{
+	/* This function checks for following limitations set
+	 * by the hardware (all conditions must be true):
+	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
+	 * ARM_CK >= TC_CK
+	 * DSP_CK >= TC_CK
+	 * DSPMMU_CK >= TC_CK
+	 *
+	 * In addition following rules are enforced:
+	 * LCD_CK <= TC_CK
+	 * ARMPER_CK <= TC_CK
+	 *
+	 * However, maximum frequencies are not checked for!
+	 */
+	__u8 per_exp;
+	__u8 lcd_exp;
+	__u8 arm_exp;
+	__u8 dsp_exp;
+	__u8 tc_exp;
+	__u8 dspmmu_exp;
+
+	per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
+	lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
+	arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
+	dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
+	tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
+	dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;
+
+	if (dspmmu_exp < dsp_exp)
+		dspmmu_exp = dsp_exp;
+	if (dspmmu_exp > dsp_exp+1)
+		dspmmu_exp = dsp_exp+1;
+	if (tc_exp < arm_exp)
+		tc_exp = arm_exp;
+	if (tc_exp < dspmmu_exp)
+		tc_exp = dspmmu_exp;
+	if (tc_exp > lcd_exp)
+		lcd_exp = tc_exp;
+	if (tc_exp > per_exp)
+		per_exp = tc_exp;
+
+	newval &= 0xf000;
+	newval |= per_exp << CKCTL_PERDIV_OFFSET;
+	newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
+	newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
+	newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
+	newval |= tc_exp << CKCTL_TCDIV_OFFSET;
+	newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;
+
+	return newval;
+}
+
+static int calc_dsor_exp(struct clk *clk, unsigned long rate)
+{
+	/* Note: If target frequency is too low, this function will return 4,
+	 * which is invalid value. Caller must check for this value and act
+	 * accordingly.
+	 *
+	 * Note: This function does not check for following limitations set
+	 * by the hardware (all conditions must be true):
+	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
+	 * ARM_CK >= TC_CK
+	 * DSP_CK >= TC_CK
+	 * DSPMMU_CK >= TC_CK
+	 */
+	unsigned long realrate;
+	struct clk * parent;
+	unsigned  dsor_exp;
+
+	if (unlikely(!(clk->flags & RATE_CKCTL)))
+		return -EINVAL;
+
+	parent = clk->parent;
+	if (unlikely(parent == 0))
+		return -EIO;
+
+	realrate = parent->rate;
+	for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
+		if (realrate <= rate)
+			break;
+
+		realrate /= 2;
+	}
+
+	return dsor_exp;
+}
+
+static void omap1_ckctl_recalc(struct clk * clk)
+{
+	int dsor;
+
+	/* Calculate divisor encoded as 2-bit exponent */
+	dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+
+	if (unlikely(clk->rate == clk->parent->rate / dsor))
+		return; /* No change, quick exit */
+	clk->rate = clk->parent->rate / dsor;
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
+{
+	int dsor;
+
+	/* Calculate divisor encoded as 2-bit exponent
+	 *
+	 * The clock control bits are in DSP domain,
+	 * so api_ck is needed for access.
+	 * Note that DSP_CKCTL virt addr = phys addr, so
+	 * we must use __raw_readw() instead of omap_readw().
+	 */
+	omap1_clk_use(&api_ck.clk);
+	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
+	omap1_clk_unuse(&api_ck.clk);
+
+	if (unlikely(clk->rate == clk->parent->rate / dsor))
+		return; /* No change, quick exit */
+	clk->rate = clk->parent->rate / dsor;
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+/* MPU virtual clock functions */
+static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
+{
+	/* Find the highest supported frequency <= rate and switch to it */
+	struct mpu_rate * ptr;
+
+	if (clk != &virtual_ck_mpu)
+		return -EINVAL;
+
+	for (ptr = rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ck_ref.rate)
+			continue;
+
+		/* DPLL1 cannot be reprogrammed without risking system crash */
+		if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
+			continue;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->rate <= rate)
+			break;
+	}
+
+	if (!ptr->rate)
+		return -EINVAL;
+
+	/*
+	 * In most cases we should not need to reprogram DPLL.
+	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
+	 */
+	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+
+	ck_dpll1.rate = ptr->pll_rate;
+	propagate_rate(&ck_dpll1);
+	return 0;
+}
+
+static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
+{
+	int  ret = -EINVAL;
+	int  dsor_exp;
+	__u16  regval;
+
+	if (clk->flags & RATE_CKCTL) {
+		dsor_exp = calc_dsor_exp(clk, rate);
+		if (dsor_exp > 3)
+			dsor_exp = -EINVAL;
+		if (dsor_exp < 0)
+			return dsor_exp;
+
+		regval = __raw_readw(DSP_CKCTL);
+		regval &= ~(3 << clk->rate_offset);
+		regval |= dsor_exp << clk->rate_offset;
+		__raw_writew(regval, DSP_CKCTL);
+		clk->rate = clk->parent->rate / (1 << dsor_exp);
+		ret = 0;
+	}
+
+	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+		propagate_rate(clk);
+
+	return ret;
+}
+
+static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
+{
+	/* Find the highest supported frequency <= rate */
+	struct mpu_rate * ptr;
+	long  highest_rate;
+
+	if (clk != &virtual_ck_mpu)
+		return -EINVAL;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ck_ref.rate)
+			continue;
+
+		highest_rate = ptr->rate;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->rate <= rate)
+			break;
+	}
+
+	return highest_rate;
+}
+
+static unsigned calc_ext_dsor(unsigned long rate)
+{
+	unsigned dsor;
+
+	/* MCLK and BCLK divisor selection is not linear:
+	 * freq = 96MHz / dsor
+	 *
+	 * RATIO_SEL range: dsor <-> RATIO_SEL
+	 * 0..6: (RATIO_SEL+2) <-> (dsor-2)
+	 * 6..48:  (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
+	 * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
+	 * can not be used.
+	 */
+	for (dsor = 2; dsor < 96; ++dsor) {
+		if ((dsor & 1) && dsor > 8)
+		  	continue;
+		if (rate >= 96000000 / dsor)
+			break;
+	}
+	return dsor;
+}
+
+/* Only needed on 1510 */
+static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
+{
+	unsigned int val;
+
+	val = omap_readl(clk->enable_reg);
+	if (rate == 12000000)
+		val &= ~(1 << clk->enable_bit);
+	else if (rate == 48000000)
+		val |= (1 << clk->enable_bit);
+	else
+		return -EINVAL;
+	omap_writel(val, clk->enable_reg);
+	clk->rate = rate;
+
+	return 0;
+}
+
+/* External clock (MCLK & BCLK) functions */
+static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
+{
+	unsigned dsor;
+	__u16 ratio_bits;
+
+	dsor = calc_ext_dsor(rate);
+	clk->rate = 96000000 / dsor;
+	if (dsor > 8)
+		ratio_bits = ((dsor - 8) / 2 + 6) << 2;
+	else
+		ratio_bits = (dsor - 2) << 2;
+
+	ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
+	omap_writew(ratio_bits, clk->enable_reg);
+
+	return 0;
+}
+
+static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
+{
+	return 96000000 / calc_ext_dsor(rate);
+}
+
+static void omap1_init_ext_clk(struct clk * clk)
+{
+	unsigned dsor;
+	__u16 ratio_bits;
+
+	/* Determine current rate and ensure clock is based on 96MHz APLL */
+	ratio_bits = omap_readw(clk->enable_reg) & ~1;
+	omap_writew(ratio_bits, clk->enable_reg);
+
+	ratio_bits = (ratio_bits & 0xfc) >> 2;
+	if (ratio_bits > 6)
+		dsor = (ratio_bits - 6) * 2 + 8;
+	else
+		dsor = ratio_bits + 2;
+
+	clk-> rate = 96000000 / dsor;
+}
+
+static int omap1_clk_use(struct clk *clk)
+{
+	int ret = 0;
+	if (clk->usecount++ == 0) {
+		if (likely(clk->parent)) {
+			ret = omap1_clk_use(clk->parent);
+
+			if (unlikely(ret != 0)) {
+				clk->usecount--;
+				return ret;
+			}
+
+			if (clk->flags & CLOCK_NO_IDLE_PARENT)
+				if (!cpu_is_omap24xx())
+					omap1_clk_deny_idle(clk->parent);
+		}
+
+		ret = clk->enable(clk);
+
+		if (unlikely(ret != 0) && clk->parent) {
+			omap1_clk_unuse(clk->parent);
+			clk->usecount--;
+		}
+	}
+
+	return ret;
+}
+
+static void omap1_clk_unuse(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		clk->disable(clk);
+		if (likely(clk->parent)) {
+			omap1_clk_unuse(clk->parent);
+			if (clk->flags & CLOCK_NO_IDLE_PARENT)
+				if (!cpu_is_omap24xx())
+					omap1_clk_allow_idle(clk->parent);
+		}
+	}
+}
+
+static int omap1_clk_enable(struct clk *clk)
+{
+	__u16 regval16;
+	__u32 regval32;
+
+	if (clk->flags & ALWAYS_ENABLED)
+		return 0;
+
+	if (unlikely(clk->enable_reg == 0)) {
+		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		       clk->name);
+		return 0;
+	}
+
+	if (clk->flags & ENABLE_REG_32BIT) {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
+	} else {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+
+	return 0;
+}
+
+static void omap1_clk_disable(struct clk *clk)
+{
+	__u16 regval16;
+	__u32 regval32;
+
+	if (clk->enable_reg == 0)
+		return;
+
+	if (clk->flags & ENABLE_REG_32BIT) {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
+	} else {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+}
+
+static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp;
+
+	if (clk->flags & RATE_FIXED)
+		return clk->rate;
+
+	if (clk->flags & RATE_CKCTL) {
+		dsor_exp = calc_dsor_exp(clk, rate);
+		if (dsor_exp < 0)
+			return dsor_exp;
+		if (dsor_exp > 3)
+			dsor_exp = 3;
+		return clk->parent->rate / (1 << dsor_exp);
+	}
+
+	if(clk->round_rate != 0)
+		return clk->round_rate(clk, rate);
+
+	return clk->rate;
+}
+
+static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int  ret = -EINVAL;
+	int  dsor_exp;
+	__u16  regval;
+
+	if (clk->set_rate)
+		ret = clk->set_rate(clk, rate);
+	else if (clk->flags & RATE_CKCTL) {
+		dsor_exp = calc_dsor_exp(clk, rate);
+		if (dsor_exp > 3)
+			dsor_exp = -EINVAL;
+		if (dsor_exp < 0)
+			return dsor_exp;
+
+		regval = omap_readw(ARM_CKCTL);
+		regval &= ~(3 << clk->rate_offset);
+		regval |= dsor_exp << clk->rate_offset;
+		regval = verify_ckctl_value(regval);
+		omap_writew(regval, ARM_CKCTL);
+		clk->rate = clk->parent->rate / (1 << dsor_exp);
+		ret = 0;
+	}
+
+	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+		propagate_rate(clk);
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------
+ * Omap1 clock reset and init functions
+ *-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Resets some clocks that may be left on from bootloader,
+ * but leaves serial clocks on. See also omap_late_clk_reset().
+ */
+static inline void omap1_early_clk_reset(void)
+{
+	//omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+}
+
+static int __init omap1_late_clk_reset(void)
+{
+	/* Turn off all unused clocks */
+	struct clk *p;
+	__u32 regval32;
+
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(regval32, SOFT_REQ_REG);
+	omap_writew(0, SOFT_REQ_REG2);
+
+	list_for_each_entry(p, &clocks, node) {
+		if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
+			p->enable_reg == 0)
+			continue;
+
+		/* Clocks in the DSP domain need api_ck. Just assume bootloader
+		 * has not enabled any DSP clocks */
+		if ((u32)p->enable_reg == DSP_IDLECT2) {
+			printk(KERN_INFO "Skipping reset check for DSP domain "
+			       "clock \"%s\"\n", p->name);
+			continue;
+		}
+
+		/* Is the clock already disabled? */
+		if (p->flags & ENABLE_REG_32BIT) {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readl(p->enable_reg);
+			else
+				regval32 = omap_readl(p->enable_reg);
+		} else {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readw(p->enable_reg);
+			else
+				regval32 = omap_readw(p->enable_reg);
+		}
+
+		if ((regval32 & (1 << p->enable_bit)) == 0)
+			continue;
+
+		/* FIXME: This clock seems to be necessary but no-one
+		 * has asked for its activation. */
+		if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
+		    || p == &ck_dpll1out.clk // FIX: SoSSI, SSR
+		    || p == &arm_gpio_ck // FIX: GPIO code for 1510
+		    ) {
+			printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
+			       p->name);
+			continue;
+		}
+
+		printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
+		p->disable(p);
+		printk(" done\n");
+	}
+
+	return 0;
+}
+late_initcall(omap1_late_clk_reset);
+
+#else
+#define omap1_early_clk_reset()	{}
+#endif
+
+static struct clk_functions omap1_clk_functions = {
+	.clk_use		= omap1_clk_use,
+	.clk_unuse		= omap1_clk_unuse,
+	.clk_round_rate		= omap1_clk_round_rate,
+	.clk_set_rate		= omap1_clk_set_rate,
+};
+
+int __init omap1_clk_init(void)
+{
+	struct clk ** clkp;
+	const struct omap_clock_config *info;
+	int crystal_type = 0; /* Default 12 MHz */
+
+	omap1_early_clk_reset();
+	clk_init(&omap1_clk_functions);
+
+	/* By default all idlect1 clocks are allowed to idle */
+	arm_idlect1_mask = ~0;
+
+	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
+		if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
+			clk_register(*clkp);
+			continue;
+		}
+	}
+
+	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
+	if (info != NULL) {
+		if (!cpu_is_omap1510())
+			crystal_type = info->system_clock_type;
+	}
+
+#if defined(CONFIG_ARCH_OMAP730)
+	ck_ref.rate = 13000000;
+#elif defined(CONFIG_ARCH_OMAP16XX)
+	if (crystal_type == 2)
+		ck_ref.rate = 19200000;
+#endif
+
+	printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+	       omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+	       omap_readw(ARM_CKCTL));
+
+	/* We want to be in syncronous scalable mode */
+	omap_writew(0x1000, ARM_SYSST);
+
+#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
+	/* Use values set by bootloader. Determine PLL rate and recalculate
+	 * dependent clocks as if kernel had changed PLL or divisors.
+	 */
+	{
+		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
+
+		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
+		if (pll_ctl_val & 0x10) {
+			/* PLL enabled, apply multiplier and divisor */
+			if (pll_ctl_val & 0xf80)
+				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
+			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+		} else {
+			/* PLL disabled, apply bypass divisor */
+			switch (pll_ctl_val & 0xc) {
+			case 0:
+				break;
+			case 0x4:
+				ck_dpll1.rate /= 2;
+				break;
+			default:
+				ck_dpll1.rate /= 4;
+				break;
+			}
+		}
+	}
+	propagate_rate(&ck_dpll1);
+#else
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		printk(KERN_ERR "System frequencies not set. Check your config.\n");
+		/* Guess sane values (60MHz) */
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(0x1005, ARM_CKCTL);
+		ck_dpll1.rate = 60000000;
+		propagate_rate(&ck_dpll1);
+	}
+#endif
+	/* Cache rates for clocks connected to ck_ref (not dpll1) */
+	propagate_rate(&ck_ref);
+	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
+		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+	/* Select slicer output as OMAP input clock */
+	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
+#endif
+
+	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
+	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+
+	/* Put DSP/MPUI into reset until needed */
+	omap_writew(0, ARM_RSTCT1);
+	omap_writew(1, ARM_RSTCT2);
+	omap_writew(0x400, ARM_IDLECT1);
+
+	/*
+	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
+	 * of the ARM_IDLECT2 register must be set to zero. The power-on
+	 * default value of this bit is one.
+	 */
+	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_use(&armper_ck.clk);
+	clk_use(&armxor_ck.clk);
+	clk_use(&armtim_ck.clk); /* This should be done by timer code */
+
+	if (cpu_is_omap1510())
+		clk_enable(&arm_gpio_ck);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
new file mode 100644
index 000000000000..f3bdfb50e01a
--- /dev/null
+++ b/arch/arm/mach-omap1/clock.h
@@ -0,0 +1,768 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
+#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
+
+static int omap1_clk_enable(struct clk * clk);
+static void omap1_clk_disable(struct clk * clk);
+static void omap1_ckctl_recalc(struct clk * clk);
+static void omap1_watchdog_recalc(struct clk * clk);
+static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
+static int omap1_clk_enable_dsp_domain(struct clk * clk);
+static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
+static void omap1_clk_disable_dsp_domain(struct clk * clk);
+static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
+static void omap1_uart_recalc(struct clk * clk);
+static int omap1_clk_enable_uart_functional(struct clk * clk);
+static void omap1_clk_disable_uart_functional(struct clk * clk);
+static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
+static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
+static void omap1_init_ext_clk(struct clk * clk);
+static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
+static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
+static int omap1_clk_use(struct clk *clk);
+static void omap1_clk_unuse(struct clk *clk);
+
+struct mpu_rate {
+	unsigned long		rate;
+	unsigned long		xtal;
+	unsigned long		pll_rate;
+	__u16			ckctl_val;
+	__u16			dpllctl_val;
+};
+
+struct uart_clk {
+	struct clk	clk;
+	unsigned long	sysc_addr;
+};
+
+/* Provide a method for preventing idling some ARM IDLECT clocks */
+struct arm_idlect1_clk {
+	struct clk	clk;
+	unsigned long	no_idle_count;
+	__u8		idlect_shift;
+};
+
+/* ARM_CKCTL bit shifts */
+#define CKCTL_PERDIV_OFFSET	0
+#define CKCTL_LCDDIV_OFFSET	2
+#define CKCTL_ARMDIV_OFFSET	4
+#define CKCTL_DSPDIV_OFFSET	6
+#define CKCTL_TCDIV_OFFSET	8
+#define CKCTL_DSPMMUDIV_OFFSET	10
+/*#define ARM_TIMXO		12*/
+#define EN_DSPCK		13
+/*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
+/* DSP_CKCTL bit shifts */
+#define CKCTL_DSPPERDIV_OFFSET	0
+
+/* ARM_IDLECT2 bit shifts */
+#define EN_WDTCK	0
+#define EN_XORPCK	1
+#define EN_PERCK	2
+#define EN_LCDCK	3
+#define EN_LBCK		4 /* Not on 1610/1710 */
+/*#define EN_HSABCK	5*/
+#define EN_APICK	6
+#define EN_TIMCK	7
+#define DMACK_REQ	8
+#define EN_GPIOCK	9 /* Not on 1610/1710 */
+/*#define EN_LBFREECK	10*/
+#define EN_CKOUT_ARM	11
+
+/* ARM_IDLECT3 bit shifts */
+#define EN_OCPI_CK	0
+#define EN_TC1_CK	2
+#define EN_TC2_CK	4
+
+/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
+#define EN_DSPTIMCK	5
+
+/* Various register defines for clock controls scattered around OMAP chip */
+#define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
+#define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
+#define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */
+#define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */
+#define SWD_CLK_DIV_CTRL_SEL	0xfffe0874
+#define COM_CLK_DIV_CTRL_SEL	0xfffe0878
+#define SOFT_REQ_REG		0xfffe0834
+#define SOFT_REQ_REG2		0xfffe0880
+
+/*-------------------------------------------------------------------------
+ * Omap1 MPU rate table
+ *-------------------------------------------------------------------------*/
+static struct mpu_rate rate_table[] = {
+	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
+	 * NOTE: Comment order here is different from bits in CKCTL value:
+	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
+	 */
+#if defined(CONFIG_OMAP_ARM_216MHZ)
+	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_195MHZ)
+	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_192MHZ)
+	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
+	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
+	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
+	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
+	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_182MHZ)
+	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_168MHZ)
+	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_150MHZ)
+	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_120MHZ)
+	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_96MHZ)
+	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_60MHZ)
+	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_30MHZ)
+	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
+#endif
+	{ 0, 0, 0, 0, 0 },
+};
+
+/*-------------------------------------------------------------------------
+ * Omap1 clocks
+ *-------------------------------------------------------------------------*/
+
+static struct clk ck_ref = {
+	.name		= "ck_ref",
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ALWAYS_ENABLED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk ck_dpll1 = {
+	.name		= "ck_dpll1",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_PROPAGATES | ALWAYS_ENABLED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk ck_dpll1out = {
+	.clk = {
+	       	.name		= "ck_dpll1out",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_CKOUT_ARM,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 12,
+};
+
+static struct clk arm_ck = {
+	.name		= "arm_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.rate_offset	= CKCTL_ARMDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk armper_ck = {
+	.clk = {
+		.name		= "armper_ck",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  RATE_CKCTL | CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_PERCK,
+		.rate_offset	= CKCTL_PERDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 2,
+};
+
+static struct clk arm_gpio_ck = {
+	.name		= "arm_gpio_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510,
+	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_bit	= EN_GPIOCK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk armxor_ck = {
+	.clk = {
+		.name		= "armxor_ck",
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_XORPCK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 1,
+};
+
+static struct arm_idlect1_clk armtim_ck = {
+	.clk = {
+		.name		= "armtim_ck",
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_TIMCK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 9,
+};
+
+static struct arm_idlect1_clk armwdt_ck = {
+	.clk = {
+		.name		= "armwdt_ck",
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_WDTCK,
+		.recalc		= &omap1_watchdog_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 0,
+};
+
+static struct clk arminth_ck16xx = {
+	.name		= "arminth_ck",
+	.parent		= &arm_ck,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	/* Note: On 16xx the frequency can be divided by 2 by programming
+	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
+	 *
+	 * 1510 version is in TC clocks.
+	 */
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dsp_ck = {
+	.name		= "dsp_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL,
+	.enable_reg	= (void __iomem *)ARM_CKCTL,
+	.enable_bit	= EN_DSPCK,
+	.rate_offset	= CKCTL_DSPDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dspmmu_ck = {
+	.name		= "dspmmu_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | ALWAYS_ENABLED,
+	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dspper_ck = {
+	.name		= "dspper_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
+	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_bit	= EN_PERCK,
+	.rate_offset	= CKCTL_PERDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc_dsp_domain,
+	.set_rate	= &omap1_clk_set_rate_dsp_domain,
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
+static struct clk dspxor_ck = {
+	.name		= "dspxor_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_IO_ADDRESS,
+	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_bit	= EN_XORPCK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
+static struct clk dsptim_ck = {
+	.name		= "dsptim_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_IO_ADDRESS,
+	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_bit	= EN_DSPTIMCK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
+/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
+static struct arm_idlect1_clk tc_ck = {
+	.clk = {
+		.name		= "tc_ck",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IN_OMAP730 | RATE_CKCTL |
+				  RATE_PROPAGATES | ALWAYS_ENABLED |
+				  CLOCK_IDLE_CONTROL,
+		.rate_offset	= CKCTL_TCDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 6,
+};
+
+static struct clk arminth_ck1510 = {
+	.name		= "arminth_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	/* Note: On 1510 the frequency follows TC_CK
+	 *
+	 * 16xx version is in MPU clocks.
+	 */
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk tipb_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "tibp_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk l3_ocpi_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "l3_ocpi_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_bit	= EN_OCPI_CK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk tc1_ck = {
+	.name		= "tc1_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_bit	= EN_TC1_CK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk tc2_ck = {
+	.name		= "tc2_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_bit	= EN_TC2_CK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dma_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "dma_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dma_lcdfree_ck = {
+	.name		= "dma_lcdfree_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk api_ck = {
+	.clk = {
+		.name		= "api_ck",
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_APICK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 8,
+};
+
+static struct arm_idlect1_clk lb_ck = {
+	.clk = {
+		.name		= "lb_ck",
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_LBCK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 4,
+};
+
+static struct clk rhea1_ck = {
+	.name		= "rhea1_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk rhea2_ck = {
+	.name		= "rhea2_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk lcd_ck_16xx = {
+	.name		= "lcd_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
+	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_bit	= EN_LCDCK,
+	.rate_offset	= CKCTL_LCDDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk lcd_ck_1510 = {
+	.clk = {
+		.name		= "lcd_ck",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP1510 | RATE_CKCTL |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_LCDCK,
+		.rate_offset	= CKCTL_LCDDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 3,
+};
+
+static struct clk uart1_1510 = {
+	.name		= "uart1_ck",
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
+			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct uart_clk uart1_16xx = {
+	.clk	= {
+		.name		= "uart1_ck",
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
+				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.enable_bit	= 29,
+		.enable		= &omap1_clk_enable_uart_functional,
+		.disable	= &omap1_clk_disable_uart_functional,
+	},
+	.sysc_addr	= 0xfffb0054,
+};
+
+static struct clk uart2_ck = {
+	.name		= "uart2_ck",
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
+			  CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk uart3_1510 = {
+	.name		= "uart3_ck",
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
+			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct uart_clk uart3_16xx = {
+	.clk	= {
+		.name		= "uart3_ck",
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
+				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.enable_bit	= 31,
+		.enable		= &omap1_clk_enable_uart_functional,
+		.disable	= &omap1_clk_disable_uart_functional,
+	},
+	.sysc_addr	= 0xfffb9854,
+};
+
+static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
+	.name		= "usb_clko",
+	/* Direct from ULPD, no parent */
+	.rate		= 6000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)ULPD_CLOCK_CTRL,
+	.enable_bit	= USB_MCLK_EN_BIT,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk usb_hhc_ck1510 = {
+	.name		= "usb_hhc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
+	.flags		= CLOCK_IN_OMAP1510 |
+			  RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= USB_HOST_HHC_UHOST_EN,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk usb_hhc_ck16xx = {
+	.name		= "usb_hhc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
+	.flags		= CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
+	.enable_bit	= 8 /* UHOST_EN */,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk usb_dc_ck = {
+	.name		= "usb_dc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
+	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
+	.enable_bit	= 4,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mclk_1510 = {
+	.name		= "mclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mclk_16xx = {
+	.name		= "mclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)COM_CLK_DIV_CTRL_SEL,
+	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk bclk_1510 = {
+	.name		= "bclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk bclk_16xx = {
+	.name		= "bclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)SWD_CLK_DIV_CTRL_SEL,
+	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mmc1_ck = {
+	.name		= "mmc1_ck",
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 23,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mmc2_ck = {
+	.name		= "mmc2_ck",
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 20,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk virtual_ck_mpu = {
+	.name		= "mpu",
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_CLOCK | ALWAYS_ENABLED,
+	.parent		= &arm_ck, /* Is smarter alias for */
+	.recalc		= &followparent_recalc,
+	.set_rate	= &omap1_select_table_rate,
+	.round_rate	= &omap1_round_to_table_rate,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk * onchip_clks[] = {
+	/* non-ULPD clocks */
+	&ck_ref,
+	&ck_dpll1,
+	/* CK_GEN1 clocks */
+	&ck_dpll1out.clk,
+	&arm_ck,
+	&armper_ck.clk,
+	&arm_gpio_ck,
+	&armxor_ck.clk,
+	&armtim_ck.clk,
+	&armwdt_ck.clk,
+	&arminth_ck1510,  &arminth_ck16xx,
+	/* CK_GEN2 clocks */
+	&dsp_ck,
+	&dspmmu_ck,
+	&dspper_ck,
+	&dspxor_ck,
+	&dsptim_ck,
+	/* CK_GEN3 clocks */
+	&tc_ck.clk,
+	&tipb_ck,
+	&l3_ocpi_ck,
+	&tc1_ck,
+	&tc2_ck,
+	&dma_ck,
+	&dma_lcdfree_ck,
+	&api_ck.clk,
+	&lb_ck.clk,
+	&rhea1_ck,
+	&rhea2_ck,
+	&lcd_ck_16xx,
+	&lcd_ck_1510.clk,
+	/* ULPD clocks */
+	&uart1_1510,
+	&uart1_16xx.clk,
+	&uart2_ck,
+	&uart3_1510,
+	&uart3_16xx.clk,
+	&usb_clko,
+	&usb_hhc_ck1510, &usb_hhc_ck16xx,
+	&usb_dc_ck,
+	&mclk_1510,  &mclk_16xx,
+	&bclk_1510,  &bclk_16xx,
+	&mmc1_ck,
+	&mmc2_ck,
+	/* Virtual clocks */
+	&virtual_ck_mpu,
+};
+
+#endif
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 3c5d901efeaa..ecbc47514adc 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -25,56 +25,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/gpio.h>
 
-
-static void omap_nop_release(struct device *dev)
-{
-        /* Nothing */
-}
-
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define	OMAP_I2C_BASE		0xfffb3800
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= OMAP_I2C_BASE,
-		.end		= OMAP_I2C_BASE + 0x3f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_I2C,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-/* DMA not used; works around erratum writing to non-empty i2c fifo */
-
-static struct platform_device omap_i2c_device = {
-        .name           = "i2c_omap",
-        .id             = -1,
-        .dev = {
-                .release        = omap_nop_release,
-        },
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-static void omap_init_i2c(void)
-{
-	/* FIXME define and use a boot tag, in case of boards that
-	 * either don't wire up I2C, or chips that mux it differently...
-	 * it can include clocking and address info, maybe more.
-	 */
-	omap_cfg_reg(I2C_SCL);
-	omap_cfg_reg(I2C_SDA);
-
-	(void) platform_device_register(&omap_i2c_device);
-}
-#else
-static inline void omap_init_i2c(void) {}
-#endif
+extern void omap_nop_release(struct device *dev);
 
 /*-------------------------------------------------------------------------*/
 
@@ -110,137 +61,6 @@ static inline void omap_init_irda(void) {}
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-#define	OMAP_MMC1_BASE		0xfffb7800
-#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
-
-static struct omap_mmc_conf mmc1_conf;
-
-static u64 mmc1_dmamask = 0xffffffff;
-
-static struct resource mmc1_resources[] = {
-	{
-		.start		= IO_ADDRESS(OMAP_MMC1_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_MMC,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device1 = {
-	.name		= "mmci-omap",
-	.id		= 1,
-	.dev = {
-		.release	= omap_nop_release,
-		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_conf,
-	},
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-	.resource	= mmc1_resources,
-};
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-
-static struct omap_mmc_conf mmc2_conf;
-
-static u64 mmc2_dmamask = 0xffffffff;
-
-static struct resource mmc2_resources[] = {
-	{
-		.start		= IO_ADDRESS(OMAP_MMC2_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_1610_MMC2,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device2 = {
-	.name		= "mmci-omap",
-	.id		= 2,
-	.dev = {
-		.release	= omap_nop_release,
-		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_conf,
-	},
-	.num_resources	= ARRAY_SIZE(mmc2_resources),
-	.resource	= mmc2_resources,
-};
-#endif
-
-static void __init omap_init_mmc(void)
-{
-	const struct omap_mmc_config	*mmc_conf;
-	const struct omap_mmc_conf	*mmc;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
-		return;
-
-	/* block 1 is always available and has just one pinout option */
-	mmc = &mmc_conf->mmc[0];
-	if (mmc->enabled) {
-		omap_cfg_reg(MMC_CMD);
-		omap_cfg_reg(MMC_CLK);
-		omap_cfg_reg(MMC_DAT0);
-		if (cpu_is_omap1710()) {
-	              omap_cfg_reg(M15_1710_MMC_CLKI);
-	              omap_cfg_reg(P19_1710_MMC_CMDDIR);
-	              omap_cfg_reg(P20_1710_MMC_DATDIR0);
-	        }
-		if (mmc->wire4) {
-			omap_cfg_reg(MMC_DAT1);
-			/* NOTE:  DAT2 can be on W10 (here) or M15 */
-			if (!mmc->nomux)
-				omap_cfg_reg(MMC_DAT2);
-			omap_cfg_reg(MMC_DAT3);
-		}
-		mmc1_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device1);
-	}
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-	/* block 2 is on newer chips, and has many pinout options */
-	mmc = &mmc_conf->mmc[1];
-	if (mmc->enabled) {
-		if (!mmc->nomux) {
-			omap_cfg_reg(Y8_1610_MMC2_CMD);
-			omap_cfg_reg(Y10_1610_MMC2_CLK);
-			omap_cfg_reg(R18_1610_MMC2_CLKIN);
-			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc->wire4) {
-				omap_cfg_reg(V8_1610_MMC2_DAT1);
-				omap_cfg_reg(W15_1610_MMC2_DAT2);
-				omap_cfg_reg(R10_1610_MMC2_DAT3);
-			}
-
-			/* These are needed for the level shifter */
-			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
-			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
-			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
-		}
-
-		/* Feedback clock must be set on OMAP-1710 MMC2 */
-		if (cpu_is_omap1710())
-			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
-				     MOD_CONF_CTRL_1);
-		mmc2_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device2);
-	}
-#endif
-	return;
-}
-#else
-static inline void omap_init_mmc(void) {}
-#endif
-
 #if	defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC)
 
 #define	OMAP_RTC_BASE		0xfffb4800
@@ -279,38 +99,6 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE)
-
-#define	OMAP_WDT_BASE		0xfffeb000
-
-static struct resource wdt_resources[] = {
-	{
-		.start		= OMAP_WDT_BASE,
-		.end		= OMAP_WDT_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_wdt_device = {
-	.name	   = "omap1610_wdt",
-	.id	     = -1,
-	.dev = {
-		.release	= omap_nop_release,
-	},
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-static void omap_init_wdt(void)
-{
-	(void) platform_device_register(&omap_wdt_device);
-}
-#else
-static inline void omap_init_wdt(void) {}
-#endif
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -334,18 +122,15 @@ static inline void omap_init_wdt(void) {}
  * may be handled by the boot loader, and drivers should expect it will
  * normally have been done by the time they're probed.
  */
-static int __init omap_init_devices(void)
+static int __init omap1_init_devices(void)
 {
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	omap_init_i2c();
 	omap_init_irda();
-	omap_init_mmc();
 	omap_init_rtc();
-	omap_init_wdt();
 
 	return 0;
 }
-arch_initcall(omap_init_devices);
+arch_initcall(omap1_init_devices);
 
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 986c3b7e09bb..5c637c048368 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -18,6 +18,13 @@
 
 #include <asm/io.h>
 
+#define OMAP_DIE_ID_0		0xfffe1800
+#define OMAP_DIE_ID_1		0xfffe1804
+#define OMAP_PRODUCTION_ID_0	0xfffe2000
+#define OMAP_PRODUCTION_ID_1	0xfffe2004
+#define OMAP32_ID_0		0xfffed400
+#define OMAP32_ID_1		0xfffed404
+
 struct omap_id {
 	u16	jtag_id;	/* Used to determine OMAP type */
 	u8	die_rev;	/* Processor revision */
@@ -27,6 +34,7 @@ struct omap_id {
 
 /* Register values to detect the OMAP version */
 static struct omap_id omap_ids[] __initdata = {
+	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
@@ -164,6 +172,7 @@ void __init omap_check_revision(void)
 	case 0x07:
 		system_rev |= 0x07;
 		break;
+	case 0x03:
 	case 0x15:
 		system_rev |= 0x15;
 		break;
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 79fb86535ebc..a7a19f75b9e1 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,9 +15,10 @@
 
 #include <asm/mach/map.h>
 #include <asm/io.h>
+#include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 
-extern int clk_init(void);
+extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
 
@@ -50,7 +51,7 @@ static struct map_desc omap730_io_desc[] __initdata = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
 	{
 		.virtual	= OMAP1510_DSP_BASE,
@@ -98,7 +99,7 @@ static void __init _omap_map_io(void)
 		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
 	}
@@ -119,7 +120,7 @@ static void __init _omap_map_io(void)
 
 	/* Must init clocks early to assure that timer interrupt works
 	 */
-	clk_init();
+	omap1_clk_init();
 }
 
 /*
@@ -127,7 +128,9 @@ static void __init _omap_map_io(void)
  */
 void __init omap_map_common_io(void)
 {
-	if (!initialized)
+	if (!initialized) {
 		_omap_map_io();
+		omap1_mux_init();
+	}
 }
 
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 192ce6055faa..ed65a7d2e941 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -47,6 +47,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
 
 #include <asm/io.h>
 
@@ -147,11 +148,15 @@ static struct omap_irq_bank omap730_irq_banks[] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3febfff },
 	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0xffbfffed },
 };
+static struct omap_irq_bank omap310_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3faefc3 },
+	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0x65b3c061 },
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP16XX)
@@ -181,11 +186,15 @@ void __init omap_init_irq(void)
 		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
 	}
+	if (cpu_is_omap310()) {
+		irq_banks = omap310_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
+	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
@@ -226,9 +235,11 @@ void __init omap_init_irq(void)
 	}
 
 	/* Unmask level 2 handler */
-	if (cpu_is_omap730()) {
+
+	if (cpu_is_omap730())
 		omap_unmask_irq(INT_730_IH2_IRQ);
-	} else {
-		omap_unmask_irq(INT_IH2_IRQ);
-	}
+	else if (cpu_is_omap1510())
+		omap_unmask_irq(INT_1510_IH2_IRQ);
+	else if (cpu_is_omap16xx())
+		omap_unmask_irq(INT_1610_IH2_IRQ);
 }
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 399010c14036..650650815915 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -18,6 +18,7 @@
 #include <asm/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
+#include <asm/mach-types.h>
 
 #include <asm/arch/fpga.h>
 #include <asm/arch/gpio.h>
@@ -63,14 +64,19 @@ void h2p2_dbg_leds_event(led_event_t evt)
 	case led_stop:
 	case led_halted:
 		/* all leds off during suspend or shutdown */
-		omap_set_gpio_dataout(GPIO_TIMER, 0);
-		omap_set_gpio_dataout(GPIO_IDLE, 0);
+
+		if (! machine_is_omap_perseus2()) {
+			omap_set_gpio_dataout(GPIO_TIMER, 0);
+			omap_set_gpio_dataout(GPIO_IDLE, 0);
+		}
+
 		__raw_writew(~0, &fpga->leds);
 		led_state &= ~LED_STATE_ENABLED;
 		if (evt == led_halted) {
 			iounmap(fpga);
 			fpga = NULL;
 		}
+
 		goto done;
 
 	case led_claim:
@@ -85,18 +91,37 @@ void h2p2_dbg_leds_event(led_event_t evt)
 #ifdef CONFIG_LEDS_TIMER
 	case led_timer:
 		led_state ^= LED_TIMER_ON;
-		omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON);
-		goto done;
+
+		if (machine_is_omap_perseus2())
+			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
+		else {
+			omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON);
+			goto done;
+		}
+
+		break;
 #endif
 
 #ifdef CONFIG_LEDS_CPU
 	case led_idle_start:
-		omap_set_gpio_dataout(GPIO_IDLE, 1);
-		goto done;
+		if (machine_is_omap_perseus2())
+			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
+		else {
+			omap_set_gpio_dataout(GPIO_IDLE, 1);
+			goto done;
+		}
+
+		break;
 
 	case led_idle_end:
-		omap_set_gpio_dataout(GPIO_IDLE, 0);
-		goto done;
+		if (machine_is_omap_perseus2())
+			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
+		else {
+			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			goto done;
+		}
+
+		break;
 #endif
 
 	case led_green_on:
@@ -135,7 +160,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
 	/*
 	 *  Actually burn the LEDs
 	 */
-	if (led_state & LED_STATE_CLAIMED)
+	if (led_state & LED_STATE_ENABLED)
 		__raw_writew(~hw_led_state, &fpga->leds);
 
 done:
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 5c6b1bb6e722..3f9dcac4fd41 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -33,7 +33,6 @@ omap_leds_init(void)
 
 	if (machine_is_omap_h2()
 			|| machine_is_omap_h3()
-			|| machine_is_omap_perseus2()
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 			|| machine_is_omap_osk()
 #endif
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
new file mode 100644
index 000000000000..d4b8d624e742
--- /dev/null
+++ b/arch/arm/mach-omap1/mux.c
@@ -0,0 +1,289 @@
+/*
+ * linux/arch/arm/mach-omap1/mux.c
+ *
+ * OMAP1 pin multiplexing configurations
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+#ifdef CONFIG_ARCH_OMAP730
+struct pin_config __initdata_or_module omap730_pins[] = {
+MUX_CFG_730("E2_730_KBR0",	12,   21,    0,	  0,   20,   1,	  NA,	 0,  0)
+MUX_CFG_730("J7_730_KBR1",	12,   25,    0,	  0,   24,   1,	  NA,	 0,  0)
+MUX_CFG_730("E1_730_KBR2",	12,   29,    0,	  0,   28,   1,	  NA,	 0,  0)
+MUX_CFG_730("F3_730_KBR3",	13,    1,    0,	  0,   0,    1,	  NA,	 0,  0)
+MUX_CFG_730("D2_730_KBR4",	13,    5,    0,	  0,   4,    1,	  NA,	 0,  0)
+MUX_CFG_730("C2_730_KBC0",	13,    9,    0,	  0,	8,   1,	  NA,	 0,  0)
+MUX_CFG_730("D3_730_KBC1",	13,   13,    0,	  0,   12,   1,	  NA,	 0,  0)
+MUX_CFG_730("E4_730_KBC2",	13,   17,    0,	  0,   16,   1,	  NA,	 0,  0)
+MUX_CFG_730("F4_730_KBC3",	13,   21,    0,	  0,   20,   1,	  NA,	 0,  0)
+MUX_CFG_730("E3_730_KBC4",	13,   25,    0,	  0,   24,   1,	  NA,	 0,  0)
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+struct pin_config __initdata_or_module omap1xxx_pins[] = {
+/*
+ *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
+ *				reg  offset mode reg  bit   ena	  reg
+ */
+MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)
+
+/* UART2 (COM_UART_GATING), conflicts with USB2 */
+MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)
+
+/* UART3 (GIGA_UART_GATING) */
+MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
+MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
+MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
+
+/* PWT & PWL, conflicts with UART3 */
+MUX_CFG("PWT",		 	 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("PWL",		 	 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
+
+/* USB internal master generic */
+MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
+MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
+/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
+MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
+MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
+MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
+MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)
+
+/* USB1 master */
+MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)
+
+/* USB2 master */
+MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)
+
+/* OMAP-1510 GPIO */
+MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
+MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
+MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)
+
+/* OMAP1610 GPIO */
+MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
+MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)
+
+/* OMAP-1710 GPIO */
+MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
+MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
+MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
+MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
+
+/* MPUIO */
+MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
+MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
+MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
+MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
+
+MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
+MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
+MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
+MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
+MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)
+
+/* MCBSP2 */
+MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)
+
+/* MCBSP3 NOTE: Mode must 1 for clock */
+MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
+
+/* Misc ballouts */
+MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
+MUX_CFG("N20_HDQ",	       6,   18,    1,   1,   4,   0,    1,     4,  0)
+
+/* OMAP-1610 MMC2 */
+MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
+MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
+MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
+MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
+MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
+MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
+MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
+MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)
+
+/* OMAP-1610 External Trace Interface */
+MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
+MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
+MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
+MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
+MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
+MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
+
+/* OMAP16XX GPIO */
+MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
+MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
+MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
+MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
+MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
+MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
+MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
+MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
+MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
+MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)
+
+/* OMAP-1610 uWire */
+MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
+MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
+MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
+MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
+MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
+MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
+
+/* OMAP-1610 Flash */
+MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
+
+/* First MMC interface, same on 1510, 1610 and 1710 */
+MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
+MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
+MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)
+
+/* OMAP-1610 USB0 alternate configuration */
+MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
+MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
+MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
+MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
+MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
+MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
+MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
+MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
+
+/* USB2 interface */
+MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
+
+/* 16XX UART */
+MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
+MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
+MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
+MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
+MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
+MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)
+
+/* I2C interface */
+MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
+MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)
+
+/* Keypad */
+MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
+MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
+MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
+MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
+MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
+MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
+MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
+MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
+MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
+MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
+MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)
+
+/* Power management */
+MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
+
+/* MCLK Settings */
+MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
+MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
+
+/* CompactFlash controller, conflicts with MMC1 */
+MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
+MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
+MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
+MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
+};
+#endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
+
+int __init omap1_mux_init(void)
+{
+
+#ifdef CONFIG_ARCH_OMAP730
+	omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+	omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins));
+#endif
+
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 40c4f7c40e73..6810cfb84462 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -109,9 +109,10 @@ static struct platform_device serial_device = {
  * By default UART2 does not work on Innovator-1510 if you have
  * USB OHCI enabled. To use UART2, you must disable USB2 first.
  */
-void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
+void __init omap_serial_init(void)
 {
 	int i;
+	const struct omap_uart_config *info;
 
 	if (cpu_is_omap730()) {
 		serial_platform_data[0].regshift = 0;
@@ -126,10 +127,14 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
+	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
+	if (info == NULL)
+		return;
+
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		unsigned char reg;
 
-		if (ports[i] == 0) {
+		if (!((1 << i) & info->enabled_uarts)) {
 			serial_platform_data[i].membase = NULL;
 			serial_platform_data[i].mapbase = 0;
 			continue;
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 191a9b1ee9b7..cdbf4d7620c6 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -226,8 +226,8 @@ unsigned long long sched_clock(void)
 
 #ifdef CONFIG_OMAP_32K_TIMER
 
-#ifdef CONFIG_ARCH_OMAP1510
-#error OMAP 32KHz timer does not currently work on 1510!
+#ifdef CONFIG_ARCH_OMAP15XX
+#error OMAP 32KHz timer does not currently work on 15XX!
 #endif
 
 /*
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e3c14d6b4328..4e8d19318d22 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -102,8 +102,8 @@ config CPU_ARM922T
 # ARM925T
 config CPU_ARM925T
  	bool "Support ARM925T processor" if ARCH_OMAP1
- 	depends on ARCH_OMAP1510
- 	default y if ARCH_OMAP1510
+ 	depends on ARCH_OMAP15XX
+ 	default y if ARCH_OMAP15XX
 	select CPU_32v4
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT