diff options
| author | Shawn Guo <shawn.guo@linaro.org> | 2011-11-10 09:39:32 +0100 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2011-11-11 16:53:35 +0100 |
| commit | f750ba9b8db2a926c315ccfa9e95d12fe4590a22 (patch) | |
| tree | 1bdd2ce107b6a39b4797dab955a003e7a9c1e0ba /arch | |
| parent | arm/imx: fix AUTO_ZRELADDR selection (diff) | |
| download | linux-f750ba9b8db2a926c315ccfa9e95d12fe4590a22.tar.xz linux-f750ba9b8db2a926c315ccfa9e95d12fe4590a22.zip | |
arm/imx: fix imx6q mmc error when mounting rootfs
The following error is seen in some case when mounting rootfs from
SD/MMC cards.
Waiting for root device /dev/mmcblk0p1...
mmc1: host does not support reading read-only switch. assuming write-enable.
mmc1: new high speed SDHC card at address b368
mmcblk0: mmc1:b368 SDC 3.74 GiB
mmcblk0: p1
mmc1: Timeout waiting for hardware interrupt.
mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00
end_request: I/O error, dev mmcblk0, sector 3678225
Buffer I/O error on device mmcblk0p1, logical block 458754
lost page write due to I/O error on mmcblk0p1
This patch fixes the problem by lowering the usdhc clock and correcting
watermark configuration.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-imx/clock-imx6q.c | 17 |
1 files changed, 16 insertions, 1 deletions
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index e0b926dfeced..613a1b993bff 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -1139,7 +1139,7 @@ static int _clk_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; max_div = ((d->bm_pred >> d->bp_pred) + 1) * - ((d->bm_pred >> d->bp_pred) + 1); + ((d->bm_podf >> d->bp_podf) + 1); div = parent_rate / rate; if (div == 0) @@ -2002,6 +2002,21 @@ int __init mx6q_clocks_init(void) clk_set_rate(&asrc_serial_clk, 1500000); clk_set_rate(&enfc_clk, 11000000); + /* + * Before pinctrl API is available, we have to rely on the pad + * configuration set up by bootloader. For usdhc example here, + * u-boot sets up the pads for 49.5 MHz case, and we have to lower + * the usdhc clock from 198 to 49.5 MHz to match the pad configuration. + * + * FIXME: This is should be removed after pinctrl API is available. + * At that time, usdhc driver can call pinctrl API to change pad + * configuration dynamically per different usdhc clock settings. + */ + clk_set_rate(&usdhc1_clk, 49500000); + clk_set_rate(&usdhc2_clk, 49500000); + clk_set_rate(&usdhc3_clk, 49500000); + clk_set_rate(&usdhc4_clk, 49500000); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); |