diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2013-06-20 22:36:11 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2013-06-20 22:36:11 +0200 |
| commit | ff8fa4e287b0d57d44eeb8aad43c38f92efcf398 (patch) | |
| tree | 4af3ac0f8b8e56fb6ec570474e8fb693cec9e4cb /arch | |
| parent | Merge tag 'exynos-arch-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kg... (diff) | |
| parent | ARM: EXYNOS: Remove remaining dead code after non-DT support removal (diff) | |
| download | linux-ff8fa4e287b0d57d44eeb8aad43c38f92efcf398.tar.xz linux-ff8fa4e287b0d57d44eeb8aad43c38f92efcf398.zip | |
Merge tag 'remove-nondt-exynos-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
From Kukjin Kim:
cleanup and removing dead code for only support DT for exynos
- remove board file for exynos
- remove legacy files which are not used anymore
- decouple ARCH_EXYNOS from PLAT_S5P
* tag 'remove-nondt-exynos-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (35 commits)
ARM: EXYNOS: Remove remaining dead code after non-DT support removal
ARM: EXYNOS: Remove legacy L2X0 initialization
ARM: EXYNOS: Use exynos_init_io() as map_io callback
ARM: EXYNOS: Remove custom init_irq callbacks
ARM: EXYNOS: Remove mach/regs-usb-phy.h header
thermal: exynos: Support both EXYNOS4X12 SoCs
ARM: EXYNOS: Remove unused base addresses from mach/map.h header
ARM: EXYNOS: Remove mach/irqs.h header
ARM: EXYNOS: Select SPARSE_IRQ for Exynos
ARM: SAMSUNG: Make legacy MFC support code depend on SAMSUNG_ATAGS
ARM: EXYNOS: Remove mach/regs-gpio.h header
ARM: EXYNOS: Remove mach/gpio.h
ARM: EXYNOS: Remove setup-i2c0.c
ARM: EXYNOS: Do not select legacy Kconfig symbols any more
ARM: SAMSUNG: Include most of mach/ headers conditionally
ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5P
USB: Check for ARCH_EXYNOS separately
platform: Check for ARCH_EXYNOS separately
ARM: SAMSUNG: Compile legacy IRQ and GPIO PM code only with ATAGS support
ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h header
...
Conflicts:
arch/arm/mach-exynos/Kconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch')
49 files changed, 118 insertions, 8250 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 102bf5798501..4fd8ed7021ce 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -697,6 +697,7 @@ config ARCH_S3C24XX select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -704,6 +705,7 @@ config ARCH_S3C24XX select MULTI_IRQ_HANDLER select NEED_MACH_GPIO_H select NEED_MACH_IO_H + select SAMSUNG_ATAGS help Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST @@ -719,6 +721,7 @@ config ARCH_S3C64XX select CLKSRC_MMIO select CPU_V6 select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -728,6 +731,7 @@ config ARCH_S3C64XX select PLAT_SAMSUNG select S3C_DEV_NAND select S3C_GPIO_TRACK + select SAMSUNG_ATAGS select SAMSUNG_CLKSRC select SAMSUNG_GPIOLIB_4BIT select SAMSUNG_IRQ_VIC_TIMER @@ -741,11 +745,13 @@ config ARCH_S5P64X0 select CLKSRC_MMIO select CPU_V6 select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H + select SAMSUNG_ATAGS help Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. @@ -757,11 +763,13 @@ config ARCH_S5PC100 select CLKSRC_MMIO select CPU_V7 select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H + select SAMSUNG_ATAGS help Samsung S5PC100 series based systems @@ -774,12 +782,14 @@ config ARCH_S5PV210 select CLKSRC_MMIO select CPU_V7 select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H + select SAMSUNG_ATAGS help Samsung S5PV210/S5PC110 series based systems @@ -787,7 +797,9 @@ config ARCH_EXYNOS bool "Samsung EXYNOS" select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE + select ARM_GIC select CLKDEV_LOOKUP select COMMON_CLK select CPU_V7 @@ -796,8 +808,9 @@ config ARCH_EXYNOS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H + select SPARSE_IRQ + select USE_OF help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 650be0f10416..5a1c48ac5bc5 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -199,6 +199,7 @@ machine-$(CONFIG_ARCH_KEYSTONE) += keystone # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. +plat-$(CONFIG_ARCH_EXYNOS) += samsung plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_ARCH_S3C64XX) += samsung plat-$(CONFIG_PLAT_IOP) += iop diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index e51d99060d33..1e0e3999c17a 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -14,6 +14,7 @@ menu "SAMSUNG EXYNOS SoCs Support" config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" default y + select GIC_NON_BANKED select HAVE_ARM_SCU if SMP select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 @@ -89,329 +90,11 @@ config SOC_EXYNOS5440 help Enable EXYNOS5440 SoC support -config EXYNOS_ATAGS - bool "ATAGS based boot for EXYNOS (deprecated)" - depends on !ARCH_MULTIPLATFORM - depends on ATAGS - default y - help - The EXYNOS platform is moving towards being completely probed - through device tree. This enables support for board files using - the traditional ATAGS boot format. - Note that this option is not available for multiplatform builds. - -if EXYNOS_ATAGS - -config EXYNOS_DEV_DMA - bool - help - Compile in amba device definitions for DMA controller - -config EXYNOS4_DEV_AHCI - bool - help - Compile in platform device definitions for AHCI - -config EXYNOS4_SETUP_FIMD0 - bool - help - Common setup code for FIMD0. - -config EXYNOS4_DEV_USB_OHCI - bool - help - Compile in platform device definition for USB OHCI - -config EXYNOS4_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config EXYNOS4_SETUP_I2C2 - bool - help - Common setup code for i2c bus 2. - -config EXYNOS4_SETUP_I2C3 - bool - help - Common setup code for i2c bus 3. - -config EXYNOS4_SETUP_I2C4 - bool - help - Common setup code for i2c bus 4. - -config EXYNOS4_SETUP_I2C5 - bool - help - Common setup code for i2c bus 5. - -config EXYNOS4_SETUP_I2C6 - bool - help - Common setup code for i2c bus 6. - -config EXYNOS4_SETUP_I2C7 - bool - help - Common setup code for i2c bus 7. - -config EXYNOS4_SETUP_KEYPAD - bool - help - Common setup code for keypad. - -config EXYNOS4_SETUP_SDHCI - bool - select EXYNOS4_SETUP_SDHCI_GPIO - help - Internal helper functions for EXYNOS4 based SDHCI systems. - -config EXYNOS4_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -config EXYNOS4_SETUP_FIMC - bool - help - Common setup code for the camera interfaces. - -config EXYNOS4_SETUP_USB_PHY - bool - help - Common setup code for USB PHY controller - -config EXYNOS_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations. - -# machine support - -if ARCH_EXYNOS4 - -comment "EXYNOS4210 Boards" - -config MACH_SMDKC210 - bool "SMDKC210" - select MACH_SMDKV310 - help - Machine support for Samsung SMDKC210 - -config MACH_SMDKV310 - bool "SMDKV310" - select CPU_EXYNOS4210 - select EXYNOS4_DEV_AHCI - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C24XX_PWM - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_TV - select S5P_DEV_USB_EHCI - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - help - Machine support for Samsung SMDKV310 - -config MACH_ARMLEX4210 - bool "ARMLEX4210" - select CPU_EXYNOS4210 - select EXYNOS4_DEV_AHCI - select EXYNOS4_SETUP_SDHCI - select EXYNOS_DEV_DMA - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_RTC - select S3C_DEV_WDT - help - Machine support for Samsung ARMLEX4210 based on EXYNOS4210 - -config MACH_UNIVERSAL_C210 - bool "Mobile UNIVERSAL_C210 Board" - select CLKSRC_MMIO - select CLKSRC_SAMSUNG_PWM - select CPU_EXYNOS4210 - select EXYNOS4_SETUP_FIMC - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C3 - select S3C_DEV_I2C5 - select S3C_DEV_USB_HSOTG - select S5P_DEV_CSIS0 - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_ONENAND - select S5P_DEV_TV - select S5P_GPIO_INT - select S5P_SETUP_MIPIPHY - help - Machine support for Samsung Mobile Universal S5PC210 Reference - Board. - -config MACH_NURI - bool "Mobile NURI Board" - select CPU_EXYNOS4210 - select EXYNOS4_SETUP_FIMC - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_I2C6 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C3 - select S3C_DEV_I2C5 - select S3C_DEV_I2C6 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_CSIS0 - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_USB_EHCI - select S5P_GPIO_INT - select S5P_SETUP_MIPIPHY - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_PWM - help - Machine support for Samsung Mobile NURI Board. - -config MACH_ORIGEN - bool "ORIGEN" - select CPU_EXYNOS4210 - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C24XX_PWM - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_TV - select S5P_DEV_USB_EHCI - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_PWM - help - Machine support for ORIGEN based on Samsung EXYNOS4210 - -comment "EXYNOS4212 Boards" - -config MACH_SMDK4212 - bool "SMDK4212" - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C7 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C24XX_PWM - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C3 - select S3C_DEV_I2C7 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_MFC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SOC_EXYNOS4212 - help - Machine support for Samsung SMDK4212 - -comment "EXYNOS4412 Boards" - -config MACH_SMDK4412 - bool "SMDK4412" - select MACH_SMDK4212 - select SOC_EXYNOS4412 - help - Machine support for Samsung SMDK4412 -endif - -endif - comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" + default y depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF @@ -419,7 +102,6 @@ config MACH_EXYNOS4_DT select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select S5P_DEV_MFC - select USE_OF help Machine support for Samsung Exynos4 machine with device tree enabled. Select this if a fdt blob is available for the Exynos4 SoC based board. @@ -433,28 +115,10 @@ config MACH_EXYNOS5_DT select ARM_AMBA select CLKSRC_OF select USB_ARCH_HAS_XHCI - select USE_OF help Machine support for Samsung EXYNOS5 machine with device tree enabled. Select this if a fdt blob is available for the EXYNOS5 SoC based board. -if ARCH_EXYNOS4 - -comment "Configuration for HSMMC 8-bit bus width" - -config EXYNOS4_SDHCI_CH0_8BIT - bool "Channel 0 with 8-bit bus" - help - Support HSMMC Channel 0 8-bit bus. - If selected, Channel 1 is disabled. - -config EXYNOS4_SDHCI_CH2_8BIT - bool "Channel 2 with 8-bit bus" - help - Support HSMMC Channel 2 8-bit bus. - If selected, Channel 3 is disabled. -endif - endmenu endif diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index b09b027178f3..e970a7a4e278 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -32,38 +32,5 @@ AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) # machine support -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o -obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o -obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o -obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o -obj-$(CONFIG_MACH_NURI) += mach-nuri.o -obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o - -obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o -obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o - obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o - -# device support - -obj-y += dev-uart.o -obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o -obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o -obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o -obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o - -obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o -obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o -obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o -obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o -obj-$(CONFIG_EXYNOS_SETUP_SPI) += setup-spi.o diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index f7e504b7874d..81e6320ca091 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -40,20 +40,9 @@ #include <mach/regs-irq.h> #include <mach/regs-pmu.h> -#include <mach/regs-gpio.h> -#include <mach/irqs.h> #include <plat/cpu.h> -#include <plat/devs.h> #include <plat/pm.h> -#include <plat/sdhci.h> -#include <plat/gpio-cfg.h> -#include <plat/adc-core.h> -#include <plat/fb-core.h> -#include <plat/fimc-core.h> -#include <plat/iic-core.h> -#include <plat/tv-core.h> -#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -69,31 +58,25 @@ static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); static void exynos5_map_io(void); static void exynos5440_map_io(void); -static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); static int exynos_init(void); -unsigned long xxti_f = 0, xusbxti_f = 0; - static struct cpu_table cpu_ids[] __initdata = { { .idcode = EXYNOS4210_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4210, }, { .idcode = EXYNOS4212_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4212, }, { .idcode = EXYNOS4412_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4412, }, { @@ -113,15 +96,6 @@ static struct cpu_table cpu_ids[] __initdata = { /* Initial IO mappings */ -static struct map_desc exynos_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -304,13 +278,6 @@ static struct map_desc exynos5440_iodesc0[] __initdata = { }, }; -static struct samsung_pwm_variant exynos4_pwm_variant = { - .bits = 32, - .div_base = 0, - .has_tint_cstat = true, - .tclk_mask = 0, -}; - void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -353,8 +320,7 @@ void __init exynos_init_late(void) exynos_pm_late_initcall(); } -#ifdef CONFIG_OF -int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, +static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, int depth, void *data) { struct map_desc iodesc; @@ -376,7 +342,6 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, iotable_init(&iodesc, 1); return 1; } -#endif /* * exynos_map_io @@ -384,19 +349,11 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, * register the standard cpu IO areas */ -void __init exynos_init_io(struct map_desc *mach_desc, int size) +void __init exynos_init_io(void) { debug_ll_io_init(); -#ifdef CONFIG_OF - if (initial_boot_params) - of_scan_flat_dt(exynos_fdt_map_chipid, NULL); - else -#endif - iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); - - if (mach_desc) - iotable_init(mach_desc, size); + of_scan_flat_dt(exynos_fdt_map_chipid, NULL); /* detect cpu id and rev. */ s5p_init_cpu(S5P_VA_CHIPID); @@ -417,34 +374,6 @@ static void __init exynos4_map_io(void) iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); if (soc_is_exynos4212() || soc_is_exynos4412()) iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); - - /* initialize device information early */ - exynos4_default_sdhci0(); - exynos4_default_sdhci1(); - exynos4_default_sdhci2(); - exynos4_default_sdhci3(); - - s3c_adc_setname("samsung-adc-v3"); - - s3c_fimc_setname(0, "exynos4-fimc"); - s3c_fimc_setname(1, "exynos4-fimc"); - s3c_fimc_setname(2, "exynos4-fimc"); - s3c_fimc_setname(3, "exynos4-fimc"); - - s3c_sdhci_setname(0, "exynos4-sdhci"); - s3c_sdhci_setname(1, "exynos4-sdhci"); - s3c_sdhci_setname(2, "exynos4-sdhci"); - s3c_sdhci_setname(3, "exynos4-sdhci"); - - /* The I2C bus controllers are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - s3c_i2c2_setname("s3c2440-i2c"); - - s5p_fb_setname(0, "exynos4-fb"); - s5p_hdmi_setname("exynos4-hdmi"); - - s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos5_map_io(void) @@ -460,81 +389,10 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } -void __init exynos_set_timer_source(u8 channels) -{ - exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; - exynos4_pwm_variant.output_mask &= ~channels; -} - void __init exynos_init_time(void) { - unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { - EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC, - EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC, - EXYNOS4_IRQ_TIMER4_VIC, - }; - - if (of_have_populated_dt()) { -#ifdef CONFIG_OF - of_clk_init(NULL); - clocksource_of_init(); -#endif - } else { - /* todo: remove after migrating legacy E4 platforms to dt */ -#ifdef CONFIG_ARCH_EXYNOS4 - exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); - exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); -#endif -#ifdef CONFIG_CLKSRC_SAMSUNG_PWM - if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) - samsung_pwm_clocksource_init(S3C_VA_TIMER, - timer_irqs, &exynos4_pwm_variant); - else -#endif - mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, - EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); - } -} - -static unsigned int max_combiner_nr(void) -{ - if (soc_is_exynos5250()) - return EXYNOS5_MAX_COMBINER_NR; - else if (soc_is_exynos4412()) - return EXYNOS4412_MAX_COMBINER_NR; - else if (soc_is_exynos4212()) - return EXYNOS4212_MAX_COMBINER_NR; - else - return EXYNOS4210_MAX_COMBINER_NR; -} - - -void __init exynos4_init_irq(void) -{ - unsigned int gic_bank_offset; - - gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; - - if (!of_have_populated_dt()) - gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); -#ifdef CONFIG_OF - else - irqchip_init(); -#endif - - if (!of_have_populated_dt()) - combiner_init(S5P_VA_COMBINER_BASE, NULL, - max_combiner_nr(), COMBINER_IRQ(0, 0)); - - gic_arch_extn.irq_set_wake = s3c_irq_wake; -} - -void __init exynos5_init_irq(void) -{ -#ifdef CONFIG_OF - irqchip_init(); -#endif - gic_arch_extn.irq_set_wake = s3c_irq_wake; + of_clk_init(NULL); + clocksource_of_init(); } struct bus_type exynos_subsys = { @@ -552,59 +410,19 @@ static int __init exynos_core_init(void) } core_initcall(exynos_core_init); -#ifdef CONFIG_CACHE_L2X0 static int __init exynos4_l2x0_cache_init(void) { int ret; - if (soc_is_exynos5250() || soc_is_exynos5440()) - return 0; - ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); - if (!ret) { - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); - return 0; - } - - if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) { - l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC; - /* TAG, Data Latency Control: 2 cycles */ - l2x0_saved_regs.tag_latency = 0x110; - - if (soc_is_exynos4212() || soc_is_exynos4412()) - l2x0_saved_regs.data_latency = 0x120; - else - l2x0_saved_regs.data_latency = 0x110; - - l2x0_saved_regs.prefetch_ctrl = 0x30000007; - l2x0_saved_regs.pwr_ctrl = - (L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN); - - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); + if (ret) + return ret; - __raw_writel(l2x0_saved_regs.tag_latency, - S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); - __raw_writel(l2x0_saved_regs.data_latency, - S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); - - /* L2X0 Prefetch Control */ - __raw_writel(l2x0_saved_regs.prefetch_ctrl, - S5P_VA_L2CC + L2X0_PREFETCH_CTRL); - - /* L2X0 Power Control */ - __raw_writel(l2x0_saved_regs.pwr_ctrl, - S5P_VA_L2CC + L2X0_POWER_CTRL); - - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); - clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs)); - } - - l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK); + l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); + clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); return 0; } early_initcall(exynos4_l2x0_cache_init); -#endif static int __init exynos_init(void) { @@ -612,350 +430,3 @@ static int __init exynos_init(void) return device_register(&exynos4_dev); } - -/* uart registration process */ - -static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) - tcfg->has_fracval = 1; - - s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); -} - -static void __iomem *exynos_eint_base; - -static DEFINE_SPINLOCK(eint_lock); - -static unsigned int eint0_15_data[16]; - -static inline int exynos4_irq_to_gpio(unsigned int irq) -{ - if (irq < IRQ_EINT(0)) - return -EINVAL; - - irq -= IRQ_EINT(0); - if (irq < 8) - return EXYNOS4_GPX0(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS4_GPX1(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS4_GPX2(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS4_GPX3(irq); - - return -EINVAL; -} - -static inline int exynos5_irq_to_gpio(unsigned int irq) -{ - if (irq < IRQ_EINT(0)) - return -EINVAL; - - irq -= IRQ_EINT(0); - if (irq < 8) - return EXYNOS5_GPX0(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS5_GPX1(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS5_GPX2(irq); - - irq -= 8; - if (irq < 8) - return EXYNOS5_GPX3(irq); - - return -EINVAL; -} - -static unsigned int exynos4_eint0_15_src_int[16] = { - EXYNOS4_IRQ_EINT0, - EXYNOS4_IRQ_EINT1, - EXYNOS4_IRQ_EINT2, - EXYNOS4_IRQ_EINT3, - EXYNOS4_IRQ_EINT4, - EXYNOS4_IRQ_EINT5, - EXYNOS4_IRQ_EINT6, - EXYNOS4_IRQ_EINT7, - EXYNOS4_IRQ_EINT8, - EXYNOS4_IRQ_EINT9, - EXYNOS4_IRQ_EINT10, - EXYNOS4_IRQ_EINT11, - EXYNOS4_IRQ_EINT12, - EXYNOS4_IRQ_EINT13, - EXYNOS4_IRQ_EINT14, - EXYNOS4_IRQ_EINT15, -}; - -static unsigned int exynos5_eint0_15_src_int[16] = { - EXYNOS5_IRQ_EINT0, - EXYNOS5_IRQ_EINT1, - EXYNOS5_IRQ_EINT2, - EXYNOS5_IRQ_EINT3, - EXYNOS5_IRQ_EINT4, - EXYNOS5_IRQ_EINT5, - EXYNOS5_IRQ_EINT6, - EXYNOS5_IRQ_EINT7, - EXYNOS5_IRQ_EINT8, - EXYNOS5_IRQ_EINT9, - EXYNOS5_IRQ_EINT10, - EXYNOS5_IRQ_EINT11, - EXYNOS5_IRQ_EINT12, - EXYNOS5_IRQ_EINT13, - EXYNOS5_IRQ_EINT14, - EXYNOS5_IRQ_EINT15, -}; -static inline void exynos_irq_eint_mask(struct irq_data *data) -{ - u32 mask; - - spin_lock(&eint_lock); - mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); - mask |= EINT_OFFSET_BIT(data->irq); - __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); - spin_unlock(&eint_lock); -} - -static void exynos_irq_eint_unmask(struct irq_data *data) -{ - u32 mask; - - spin_lock(&eint_lock); - mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq)); - mask &= ~(EINT_OFFSET_BIT(data->irq)); - __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq)); - spin_unlock(&eint_lock); -} - -static inline void exynos_irq_eint_ack(struct irq_data *data) -{ - __raw_writel(EINT_OFFSET_BIT(data->irq), - EINT_PEND(exynos_eint_base, data->irq)); -} - -static void exynos_irq_eint_maskack(struct irq_data *data) -{ - exynos_irq_eint_mask(data); - exynos_irq_eint_ack(data); -} - -static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = EINT_OFFSET(data->irq); - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - newvalue = S5P_IRQ_TYPE_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S5P_IRQ_TYPE_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S5P_IRQ_TYPE_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S5P_IRQ_TYPE_LEVEL_LOW; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - shift = (offs & 0x7) * 4; - mask = 0x7 << shift; - - spin_lock(&eint_lock); - ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq)); - ctrl &= ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq)); - spin_unlock(&eint_lock); - - if (soc_is_exynos5250()) - s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); - else - s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf)); - - return 0; -} - -static struct irq_chip exynos_irq_eint = { - .name = "exynos-eint", - .irq_mask = exynos_irq_eint_mask, - .irq_unmask = exynos_irq_eint_unmask, - .irq_mask_ack = exynos_irq_eint_maskack, - .irq_ack = exynos_irq_eint_ack, - .irq_set_type = exynos_irq_eint_set_type, -#ifdef CONFIG_PM - .irq_set_wake = s3c_irqext_wake, -#endif -}; - -/* - * exynos4_irq_demux_eint - * - * This function demuxes the IRQ from from EINTs 16 to 31. - * It is designed to be inlined into the specific handler - * s5p_irq_demux_eintX_Y. - * - * Each EINT pend/mask registers handle eight of them. - */ -static inline void exynos_irq_demux_eint(unsigned int start) -{ - unsigned int irq; - - u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start)); - u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start)); - - status &= ~mask; - status &= 0xff; - - while (status) { - irq = fls(status) - 1; - generic_handle_irq(irq + start); - status &= ~(1 << irq); - } -} - -static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_get_chip(irq); - chained_irq_enter(chip, desc); - exynos_irq_demux_eint(IRQ_EINT(16)); - exynos_irq_demux_eint(IRQ_EINT(24)); - chained_irq_exit(chip, desc); -} - -static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) -{ - u32 *irq_data = irq_get_handler_data(irq); - struct irq_chip *chip = irq_get_chip(irq); - - chained_irq_enter(chip, desc); - generic_handle_irq(*irq_data); - chained_irq_exit(chip, desc); -} - -static int __init exynos_init_irq_eint(void) -{ - int irq; - -#ifdef CONFIG_PINCTRL_SAMSUNG - /* - * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf - * functionality along with support for external gpio and wakeup - * interrupts. If the samsung pinctrl driver is enabled and includes - * the wakeup interrupt support, then the setting up external wakeup - * interrupts here can be skipped. This check here is temporary to - * allow exynos4 platforms that do not use Samsung pinctrl driver to - * co-exist with platforms that do. When all of the Samsung Exynos4 - * platforms switch over to using the pinctrl driver, the wakeup - * interrupt support code here can be completely removed. - */ - static const struct of_device_id exynos_pinctrl_ids[] = { - { .compatible = "samsung,exynos4210-pinctrl", }, - { .compatible = "samsung,exynos4x12-pinctrl", }, - { .compatible = "samsung,exynos5250-pinctrl", }, - }; - struct device_node *pctrl_np, *wkup_np; - const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; - - for_each_matching_node(pctrl_np, exynos_pinctrl_ids) { - if (of_device_is_available(pctrl_np)) { - wkup_np = of_find_compatible_node(pctrl_np, NULL, - wkup_compat); - if (wkup_np) - return -ENODEV; - } - } -#endif - if (soc_is_exynos5440()) - return 0; - - if (soc_is_exynos5250()) - exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K); - else - exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K); - - if (exynos_eint_base == NULL) { - pr_err("unable to ioremap for EINT base address\n"); - return -ENOMEM; - } - - for (irq = 0 ; irq <= 31 ; irq++) { - irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint, - handle_level_irq); - set_irq_flags(IRQ_EINT(irq), IRQF_VALID); - } - - irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31); - - for (irq = 0 ; irq <= 15 ; irq++) { - eint0_15_data[irq] = IRQ_EINT(irq); - - if (soc_is_exynos5250()) { - irq_set_handler_data(exynos5_eint0_15_src_int[irq], - &eint0_15_data[irq]); - irq_set_chained_handler(exynos5_eint0_15_src_int[irq], - exynos_irq_eint0_15); - } else { - irq_set_handler_data(exynos4_eint0_15_src_int[irq], - &eint0_15_data[irq]); - irq_set_chained_handler(exynos4_eint0_15_src_int[irq], - exynos_irq_eint0_15); - } - } - - return 0; -} -arch_initcall(exynos_init_irq_eint); - -static struct resource exynos4_pmu_resource[] = { - DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU), - DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU1), -#if defined(CONFIG_SOC_EXYNOS4412) - DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU2), - DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU3), -#endif -}; - -static struct platform_device exynos4_device_pmu = { - .name = "arm-pmu", - .num_resources = ARRAY_SIZE(exynos4_pmu_resource), - .resource = exynos4_pmu_resource, -}; - -static int __init exynos_armpmu_init(void) -{ - if (!of_have_populated_dt()) { - if (soc_is_exynos4210() || soc_is_exynos4212()) - exynos4_device_pmu.num_resources = 2; - platform_device_register(&exynos4_device_pmu); - } - - return 0; -} -arch_initcall(exynos_armpmu_init); diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 11fc1e29819b..38d45fd23be4 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -19,9 +19,7 @@ void exynos_init_time(void); extern unsigned long xxti_f, xusbxti_f; struct map_desc; -void exynos_init_io(struct map_desc *mach_desc, int size); -void exynos4_init_irq(void); -void exynos5_init_irq(void); +void exynos_init_io(void); void exynos4_restart(char mode, const char *cmd); void exynos5_restart(char mode, const char *cmd); void exynos_init_late(void); diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c deleted file mode 100644 index ce1aad3eeeb9..000000000000 --- a/arch/arm/mach-exynos/dev-ahci.c +++ /dev/null @@ -1,255 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dev-ahci.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - AHCI support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/ahci_platform.h> - -#include <plat/cpu.h> - -#include <mach/irqs.h> -#include <mach/map.h> -#include <mach/regs-pmu.h> - -/* PHY Control Register */ -#define SATA_CTRL0 0x0 -/* PHY Link Control Register */ -#define SATA_CTRL1 0x4 -/* PHY Status Register */ -#define SATA_PHY_STATUS 0x8 - -#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27) -#define SATA_CTRL0_SPEED_MODE (1 << 26) -#define SATA_CTRL0_M_PHY_CAL (1 << 19) -#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10) -#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9) -#define SATA_CTRL0_PHY_POR_N (1 << 8) - -#define SATA_CTRL1_RST_PMALIVE_N (1 << 8) -#define SATA_CTRL1_RST_RXOOB_N (1 << 7) -#define SATA_CTRL1_RST_RX_N (1 << 6) -#define SATA_CTRL1_RST_TX_N (1 << 5) - -#define SATA_PHY_STATUS_CMU_OK (1 << 18) -#define SATA_PHY_STATUS_LANE_OK (1 << 16) - -#define LANE0 0x200 -#define COM_LANE 0xA00 - -#define HOST_PORTS_IMPL 0xC -#define SCLK_SATA_FREQ (67 * MHZ) - -static void __iomem *phy_base, *phy_ctrl; - -struct phy_reg { - u8 reg; - u8 val; -}; - -/* SATA PHY setup */ -static const struct phy_reg exynos4_sataphy_cmu[] = { - { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 }, - { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 }, - { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 }, - { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 }, - { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 }, - { 0x6b, 0xc8 }, { 0x6c, 0x06 }, -}; - -static const struct phy_reg exynos4_sataphy_lane[] = { - { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 }, - { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 }, - { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e }, - { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 }, - { 0x51, 0x0f }, -}; - -static const struct phy_reg exynos4_sataphy_comlane[] = { - { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d }, - { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 }, - { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 }, - { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 }, - { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 }, - { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 }, - { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 }, - { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d }, - { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 }, - { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 }, - { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 }, - { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff }, - { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 }, - { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 }, -}; - -static int wait_for_phy_ready(void __iomem *reg, unsigned long bit) -{ - unsigned long timeout; - - /* wait for maximum of 3 sec */ - timeout = jiffies + msecs_to_jiffies(3000); - while (!(__raw_readl(reg) & bit)) { - if (time_after(jiffies, timeout)) - return -1; - cpu_relax(); - } - return 0; -} - -static int ahci_phy_init(void __iomem *mmio) -{ - int i, ctrl0; - - for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++) - __raw_writeb(exynos4_sataphy_cmu[i].val, - phy_base + (exynos4_sataphy_cmu[i].reg * 4)); - - for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++) - __raw_writeb(exynos4_sataphy_lane[i].val, - phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4); - - for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++) - __raw_writeb(exynos4_sataphy_comlane[i].val, - phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4); - - __raw_writeb(0x07, phy_base); - - ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); - ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N; - __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); - - if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, - SATA_PHY_STATUS_CMU_OK) < 0) { - printk(KERN_ERR "PHY CMU not ready\n"); - return -EBUSY; - } - - __raw_writeb(0x03, phy_base + (COM_LANE * 4)); - - ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); - ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N; - __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); - - if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, - SATA_PHY_STATUS_LANE_OK) < 0) { - printk(KERN_ERR "PHY LANE not ready\n"); - return -EBUSY; - } - - ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); - ctrl0 |= SATA_CTRL0_M_PHY_CAL; - __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); - - return 0; -} - -static int exynos4_ahci_init(struct device *dev, void __iomem *mmio) -{ - struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata; - int val, ret; - - phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K); - if (!phy_base) { - dev_err(dev, "failed to allocate memory for SATA PHY\n"); - return -ENOMEM; - } - - phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16); - if (!phy_ctrl) { - dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n"); - ret = -ENOMEM; - goto err1; - } - - clk_sata = clk_get(dev, "sata"); - if (IS_ERR(clk_sata)) { - dev_err(dev, "failed to get sata clock\n"); - ret = PTR_ERR(clk_sata); - clk_sata = NULL; - goto err2; - - } - clk_enable(clk_sata); - - clk_sataphy = clk_get(dev, "sataphy"); - if (IS_ERR(clk_sataphy)) { - dev_err(dev, "failed to get sataphy clock\n"); - ret = PTR_ERR(clk_sataphy); - clk_sataphy = NULL; - goto err3; - } - clk_enable(clk_sataphy); - - clk_sclk_sata = clk_get(dev, "sclk_sata"); - if (IS_ERR(clk_sclk_sata)) { - dev_err(dev, "failed to get sclk_sata\n"); - ret = PTR_ERR(clk_sclk_sata); - clk_sclk_sata = NULL; - goto err4; - } - clk_enable(clk_sclk_sata); - clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ); - - __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL); - - /* Enable PHY link control */ - val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N | - SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N; - __raw_writel(val, phy_ctrl + SATA_CTRL1); - - /* Set communication speed as 3Gbps and enable PHY power */ - val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE | - SATA_CTRL0_PHY_POR_N; - __raw_writel(val, phy_ctrl + SATA_CTRL0); - - /* Port0 is available */ - __raw_writel(0x1, mmio + HOST_PORTS_IMPL); - - return ahci_phy_init(mmio); - -err4: - clk_disable(clk_sataphy); - clk_put(clk_sataphy); -err3: - clk_disable(clk_sata); - clk_put(clk_sata); -err2: - iounmap(phy_ctrl); -err1: - iounmap(phy_base); - - return ret; -} - -static struct ahci_platform_data exynos4_ahci_pdata = { - .init = exynos4_ahci_init, -}; - -static struct resource exynos4_ahci_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K), - [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA), -}; - -static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_ahci = { - .name = "ahci", - .id = -1, - .resource = exynos4_ahci_resource, - .num_resources = ARRAY_SIZE(exynos4_ahci_resource), - .dev = { - .platform_data = &exynos4_ahci_pdata, - .dma_mask = &exynos4_ahci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c deleted file mode 100644 index c662c89794b2..000000000000 --- a/arch/arm/mach-exynos/dev-audio.c +++ /dev/null @@ -1,254 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dev-audio.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_data/asoc-s3c.h> - -#include <plat/gpio-cfg.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -#define EXYNOS4_AUDSS_INT_MEM (0x03000000) - -static int exynos4_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2)); - break; - case 1: - s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2)); - break; - case 2: - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata i2sv5_pdata = { - .cfg_gpio = exynos4_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI - | QUIRK_NEED_RSTCLR, - .idma_addr = EXYNOS4_AUDSS_INT_MEM, - }, - }, -}; - -static struct resource exynos4_i2s0_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), - [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), -}; - -struct platform_device exynos4_device_i2s0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(exynos4_i2s0_resource), - .resource = exynos4_i2s0_resource, - .dev = { - .platform_data = &i2sv5_pdata, - }, -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = exynos4_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_NO_MUXPSR, - }, - }, -}; - -static struct resource exynos4_i2s1_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), -}; - -struct platform_device exynos4_device_i2s1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(exynos4_i2s1_resource), - .resource = exynos4_i2s1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -static struct resource exynos4_i2s2_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), -}; - -struct platform_device exynos4_device_i2s2 = { - .name = "samsung-i2s", - .id = 2, - .num_resources = ARRAY_SIZE(exynos4_i2s2_resource), - .resource = exynos4_i2s2_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int exynos4_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3)); - break; - case 1: - s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3)); - break; - case 2: - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3)); - break; - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = exynos4_pcm_cfg_gpio, -}; - -static struct resource exynos4_pcm0_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), -}; - -struct platform_device exynos4_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(exynos4_pcm0_resource), - .resource = exynos4_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource exynos4_pcm1_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), -}; - -struct platform_device exynos4_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(exynos4_pcm1_resource), - .resource = exynos4_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource exynos4_pcm2_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM2_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM2_RX), -}; - -struct platform_device exynos4_device_pcm2 = { - .name = "samsung-pcm", - .id = 2, - .num_resources = ARRAY_SIZE(exynos4_pcm2_resource), - .resource = exynos4_pcm2_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -/* AC97 Controller platform devices */ - -static int exynos4_ac97_cfg_gpio(struct platform_device *pdev) -{ - return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4)); -} - -static struct resource exynos4_ac97_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_AC97, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), - [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), - [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), - [4] = DEFINE_RES_IRQ(EXYNOS4_IRQ_AC97), -}; - -static struct s3c_audio_pdata s3c_ac97_pdata = { - .cfg_gpio = exynos4_ac97_cfg_gpio, -}; - -static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_ac97 = { - .name = "samsung-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_ac97_resource), - .resource = exynos4_ac97_resource, - .dev = { - .platform_data = &s3c_ac97_pdata, - .dma_mask = &exynos4_ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* S/PDIF Controller platform_device */ - -static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) -{ - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4)); - - return 0; -} - -static struct resource exynos4_spdif_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_SPDIF, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPDIF), -}; - -static struct s3c_audio_pdata samsung_spdif_pdata = { - .cfg_gpio = exynos4_spdif_cfg_gpio, -}; - -static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_spdif = { - .name = "samsung-spdif", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_spdif_resource), - .resource = exynos4_spdif_resource, - .dev = { - .platform_data = &samsung_spdif_pdata, - .dma_mask = &exynos4_spdif_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c deleted file mode 100644 index d5bc129e6bb7..000000000000 --- a/arch/arm/mach-exynos/dev-ohci.c +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/mach-exynos/dev-ohci.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - OHCI support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/platform_data/usb-ohci-exynos.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/devs.h> -#include <plat/usb-phy.h> - -static struct resource exynos4_ohci_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256), - [1] = DEFINE_RES_IRQ(IRQ_USB_HOST), -}; - -static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_ohci = { - .name = "exynos-ohci", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_ohci_resource), - .resource = exynos4_ohci_resource, - .dev = { - .dma_mask = &exynos4_ohci_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; - -void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd) -{ - struct exynos4_ohci_platdata *npd; - - npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata), - &exynos4_device_ohci); - - if (!npd->phy_init) - npd->phy_init = s5p_usb_phy_init; - if (!npd->phy_exit) - npd->phy_exit = s5p_usb_phy_exit; -} diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c deleted file mode 100644 index c48aff02c786..000000000000 --- a/arch/arm/mach-exynos/dev-uart.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Base EXYNOS UART resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/irqs.h> - -#include <plat/devs.h> - -#define EXYNOS_UART_RESOURCE(_series, _nr) \ -static struct resource exynos##_series##_uart##_nr##_resource[] = { \ - [0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART), \ - [1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr), \ -}; - -EXYNOS_UART_RESOURCE(4, 0) -EXYNOS_UART_RESOURCE(4, 1) -EXYNOS_UART_RESOURCE(4, 2) -EXYNOS_UART_RESOURCE(4, 3) - -struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = { - [0] = { - .resources = exynos4_uart0_resource, - .nr_resources = ARRAY_SIZE(exynos4_uart0_resource), - }, - [1] = { - .resources = exynos4_uart1_resource, - .nr_resources = ARRAY_SIZE(exynos4_uart1_resource), - }, - [2] = { - .resources = exynos4_uart2_resource, - .nr_resources = ARRAY_SIZE(exynos4_uart2_resource), - }, - [3] = { - .resources = exynos4_uart3_resource, - .nr_resources = ARRAY_SIZE(exynos4_uart3_resource), - }, -}; diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c deleted file mode 100644 index 87e07d6fc615..000000000000 --- a/arch/arm/mach-exynos/dma.c +++ /dev/null @@ -1,322 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dma.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/dma-mapping.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl330.h> -#include <linux/of.h> - -#include <asm/irq.h> -#include <plat/devs.h> -#include <plat/irqs.h> -#include <plat/cpu.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/dma.h> - -static u8 exynos4210_pdma0_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM2_RX, - DMACH_PCM2_TX, - DMACH_MSM_REQ0, - DMACH_MSM_REQ2, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, -}; - -static u8 exynos4212_pdma0_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM2_RX, - DMACH_PCM2_TX, - DMACH_MIPI_HSI0, - DMACH_MIPI_HSI1, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_MIPI_HSI4, - DMACH_MIPI_HSI5, -}; - -static u8 exynos5250_pdma0_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM2_RX, - DMACH_PCM2_TX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_MIPI_HSI0, - DMACH_MIPI_HSI2, - DMACH_MIPI_HSI4, - DMACH_MIPI_HSI6, -}; - -static struct dma_pl330_platdata exynos_pdma0_pdata; - -static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330, - EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata); - -static u8 exynos4210_pdma1_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_MSM_REQ1, - DMACH_MSM_REQ3, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, -}; - -static u8 exynos4212_pdma1_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_MIPI_HSI2, - DMACH_MIPI_HSI3, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, - DMACH_SLIMBUS0AUX_RX, - DMACH_SLIMBUS0AUX_TX, - DMACH_SPDIF, - DMACH_MIPI_HSI6, - DMACH_MIPI_HSI7, -}; - -static u8 exynos5250_pdma1_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_PWM, - DMACH_SPDIF, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, - DMACH_SLIMBUS0AUX_RX, - DMACH_SLIMBUS0AUX_TX, - DMACH_DISP1, - DMACH_MIPI_HSI1, - DMACH_MIPI_HSI3, - DMACH_MIPI_HSI5, - DMACH_MIPI_HSI7, -}; - -static struct dma_pl330_platdata exynos_pdma1_pdata; - -static AMBA_AHB_DEVICE(exynos_pdma1, "dma-pl330.1", 0x00041330, - EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata); - -static u8 mdma_peri[] = { - DMACH_MTOM_0, - DMACH_MTOM_1, - DMACH_MTOM_2, - DMACH_MTOM_3, - DMACH_MTOM_4, - DMACH_MTOM_5, - DMACH_MTOM_6, - DMACH_MTOM_7, -}; - -static struct dma_pl330_platdata exynos_mdma1_pdata = { - .nr_valid_peri = ARRAY_SIZE(mdma_peri), - .peri_id = mdma_peri, -}; - -static AMBA_AHB_DEVICE(exynos_mdma1, "dma-pl330.2", 0x00041330, - EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata); - -static int __init exynos_dma_init(void) -{ - if (of_have_populated_dt()) - return 0; - - if (soc_is_exynos4210()) { - exynos_pdma0_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4210_pdma0_peri); - exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri; - exynos_pdma1_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4210_pdma1_peri); - exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri; - - if (samsung_rev() == EXYNOS4210_REV_0) - exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1; - } else if (soc_is_exynos4212() || soc_is_exynos4412()) { - exynos_pdma0_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4212_pdma0_peri); - exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri; - exynos_pdma1_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4212_pdma1_peri); - exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri; - } else if (soc_is_exynos5250()) { - exynos_pdma0_pdata.nr_valid_peri = - ARRAY_SIZE(exynos5250_pdma0_peri); - exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri; - exynos_pdma1_pdata.nr_valid_peri = - ARRAY_SIZE(exynos5250_pdma1_peri); - exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri; - - exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0; - exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K; - exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0; - exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1; - exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K; - exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1; - exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1; - exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K; - exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1; - } - - dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask); - dma_cap_set(DMA_PRIVATE, exynos_pdma0_pdata.cap_mask); - amba_device_register(&exynos_pdma0_device, &iomem_resource); - - dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask); - dma_cap_set(DMA_PRIVATE, exynos_pdma1_pdata.cap_mask); - amba_device_register(&exynos_pdma1_device, &iomem_resource); - - dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask); - amba_device_register(&exynos_mdma1_device, &iomem_resource); - - return 0; -} -arch_initcall(exynos_dma_init); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index ed11f100d479..932129ef26c6 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -48,20 +48,18 @@ static const struct firmware_ops exynos_firmware_ops = { void __init exynos_firmware_init(void) { - if (of_have_populated_dt()) { - struct device_node *nd; - const __be32 *addr; + struct device_node *nd; + const __be32 *addr; - nd = of_find_compatible_node(NULL, NULL, - "samsung,secure-firmware"); - if (!nd) - return; + nd = of_find_compatible_node(NULL, NULL, + "samsung,secure-firmware"); + if (!nd) + return; - addr = of_get_address(nd, 0, NULL, NULL); - if (!addr) { - pr_err("%s: No address specified.\n", __func__); - return; - } + addr = of_get_address(nd, 0, NULL, NULL); + if (!addr) { + pr_err("%s: No address specified.\n", __func__); + return; } pr_info("Running under secure firmware.\n"); diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h deleted file mode 100644 index eb24f1eb8e3b..000000000000 --- a/arch/arm/mach-exynos/include/mach/gpio.h +++ /dev/null @@ -1,289 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -/* Macro for EXYNOS GPIO numbering */ - -#define EXYNOS_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -/* EXYNOS4 GPIO bank sizes */ - -#define EXYNOS4_GPIO_A0_NR (8) -#define EXYNOS4_GPIO_A1_NR (6) -#define EXYNOS4_GPIO_B_NR (8) -#define EXYNOS4_GPIO_C0_NR (5) -#define EXYNOS4_GPIO_C1_NR (5) -#define EXYNOS4_GPIO_D0_NR (4) -#define EXYNOS4_GPIO_D1_NR (4) -#define EXYNOS4_GPIO_E0_NR (5) -#define EXYNOS4_GPIO_E1_NR (8) -#define EXYNOS4_GPIO_E2_NR (6) -#define EXYNOS4_GPIO_E3_NR (8) -#define EXYNOS4_GPIO_E4_NR (8) -#define EXYNOS4_GPIO_F0_NR (8) -#define EXYNOS4_GPIO_F1_NR (8) -#define EXYNOS4_GPIO_F2_NR (8) -#define EXYNOS4_GPIO_F3_NR (6) -#define EXYNOS4_GPIO_J0_NR (8) -#define EXYNOS4_GPIO_J1_NR (5) -#define EXYNOS4_GPIO_K0_NR (7) -#define EXYNOS4_GPIO_K1_NR (7) -#define EXYNOS4_GPIO_K2_NR (7) -#define EXYNOS4_GPIO_K3_NR (7) -#define EXYNOS4_GPIO_L0_NR (8) -#define EXYNOS4_GPIO_L1_NR (3) -#define EXYNOS4_GPIO_L2_NR (8) -#define EXYNOS4_GPIO_X0_NR (8) -#define EXYNOS4_GPIO_X1_NR (8) -#define EXYNOS4_GPIO_X2_NR (8) -#define EXYNOS4_GPIO_X3_NR (8) -#define EXYNOS4_GPIO_Y0_NR (6) -#define EXYNOS4_GPIO_Y1_NR (4) -#define EXYNOS4_GPIO_Y2_NR (6) -#define EXYNOS4_GPIO_Y3_NR (8) -#define EXYNOS4_GPIO_Y4_NR (8) -#define EXYNOS4_GPIO_Y5_NR (8) -#define EXYNOS4_GPIO_Y6_NR (8) -#define EXYNOS4_GPIO_Z_NR (7) - -/* EXYNOS4 GPIO bank numbers */ - -enum exynos4_gpio_number { - EXYNOS4_GPIO_A0_START = 0, - EXYNOS4_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A0), - EXYNOS4_GPIO_B_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A1), - EXYNOS4_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_B), - EXYNOS4_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0), - EXYNOS4_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1), - EXYNOS4_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0), - EXYNOS4_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1), - EXYNOS4_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0), - EXYNOS4_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1), - EXYNOS4_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2), - EXYNOS4_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3), - EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4), - EXYNOS4_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0), - EXYNOS4_GPIO_F2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1), - EXYNOS4_GPIO_F3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2), - EXYNOS4_GPIO_J0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F3), - EXYNOS4_GPIO_J1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J0), - EXYNOS4_GPIO_K0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J1), - EXYNOS4_GPIO_K1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K0), - EXYNOS4_GPIO_K2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K1), - EXYNOS4_GPIO_K3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K2), - EXYNOS4_GPIO_L0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K3), - EXYNOS4_GPIO_L1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L0), - EXYNOS4_GPIO_L2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L1), - EXYNOS4_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L2), - EXYNOS4_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X0), - EXYNOS4_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X1), - EXYNOS4_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X2), - EXYNOS4_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X3), - EXYNOS4_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y0), - EXYNOS4_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y1), - EXYNOS4_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y2), - EXYNOS4_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y3), - EXYNOS4_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y4), - EXYNOS4_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y5), - EXYNOS4_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6), -}; - -/* EXYNOS4 GPIO number definitions */ - -#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr)) -#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr)) -#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr)) -#define EXYNOS4_GPC0(_nr) (EXYNOS4_GPIO_C0_START + (_nr)) -#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr)) -#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr)) -#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr)) -#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr)) -#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr)) -#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr)) -#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr)) -#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr)) -#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr)) -#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr)) -#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr)) -#define EXYNOS4_GPF3(_nr) (EXYNOS4_GPIO_F3_START + (_nr)) -#define EXYNOS4_GPJ0(_nr) (EXYNOS4_GPIO_J0_START + (_nr)) -#define EXYNOS4_GPJ1(_nr) (EXYNOS4_GPIO_J1_START + (_nr)) -#define EXYNOS4_GPK0(_nr) (EXYNOS4_GPIO_K0_START + (_nr)) -#define EXYNOS4_GPK1(_nr) (EXYNOS4_GPIO_K1_START + (_nr)) -#define EXYNOS4_GPK2(_nr) (EXYNOS4_GPIO_K2_START + (_nr)) -#define EXYNOS4_GPK3(_nr) (EXYNOS4_GPIO_K3_START + (_nr)) -#define EXYNOS4_GPL0(_nr) (EXYNOS4_GPIO_L0_START + (_nr)) -#define EXYNOS4_GPL1(_nr) (EXYNOS4_GPIO_L1_START + (_nr)) -#define EXYNOS4_GPL2(_nr) (EXYNOS4_GPIO_L2_START + (_nr)) -#define EXYNOS4_GPX0(_nr) (EXYNOS4_GPIO_X0_START + (_nr)) -#define EXYNOS4_GPX1(_nr) (EXYNOS4_GPIO_X1_START + (_nr)) -#define EXYNOS4_GPX2(_nr) (EXYNOS4_GPIO_X2_START + (_nr)) -#define EXYNOS4_GPX3(_nr) (EXYNOS4_GPIO_X3_START + (_nr)) -#define EXYNOS4_GPY0(_nr) (EXYNOS4_GPIO_Y0_START + (_nr)) -#define EXYNOS4_GPY1(_nr) (EXYNOS4_GPIO_Y1_START + (_nr)) -#define EXYNOS4_GPY2(_nr) (EXYNOS4_GPIO_Y2_START + (_nr)) -#define EXYNOS4_GPY3(_nr) (EXYNOS4_GPIO_Y3_START + (_nr)) -#define EXYNOS4_GPY4(_nr) (EXYNOS4_GPIO_Y4_START + (_nr)) -#define EXYNOS4_GPY5(_nr) (EXYNOS4_GPIO_Y5_START + (_nr)) -#define EXYNOS4_GPY6(_nr) (EXYNOS4_GPIO_Y6_START + (_nr)) -#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr)) - -/* the end of the EXYNOS4 specific gpios */ - -#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1) - -/* EXYNOS5 GPIO bank sizes */ - -#define EXYNOS5_GPIO_A0_NR (8) -#define EXYNOS5_GPIO_A1_NR (6) -#define EXYNOS5_GPIO_A2_NR (8) -#define EXYNOS5_GPIO_B0_NR (5) -#define EXYNOS5_GPIO_B1_NR (5) -#define EXYNOS5_GPIO_B2_NR (4) -#define EXYNOS5_GPIO_B3_NR (4) -#define EXYNOS5_GPIO_C0_NR (7) -#define EXYNOS5_GPIO_C1_NR (4) -#define EXYNOS5_GPIO_C2_NR (7) -#define EXYNOS5_GPIO_C3_NR (7) -#define EXYNOS5_GPIO_C4_NR (7) -#define EXYNOS5_GPIO_D0_NR (4) -#define EXYNOS5_GPIO_D1_NR (8) -#define EXYNOS5_GPIO_Y0_NR (6) -#define EXYNOS5_GPIO_Y1_NR (4) -#define EXYNOS5_GPIO_Y2_NR (6) -#define EXYNOS5_GPIO_Y3_NR (8) -#define EXYNOS5_GPIO_Y4_NR (8) -#define EXYNOS5_GPIO_Y5_NR (8) -#define EXYNOS5_GPIO_Y6_NR (8) -#define EXYNOS5_GPIO_X0_NR (8) -#define EXYNOS5_GPIO_X1_NR (8) -#define EXYNOS5_GPIO_X2_NR (8) -#define EXYNOS5_GPIO_X3_NR (8) -#define EXYNOS5_GPIO_E0_NR (8) -#define EXYNOS5_GPIO_E1_NR (2) -#define EXYNOS5_GPIO_F0_NR (4) -#define EXYNOS5_GPIO_F1_NR (4) -#define EXYNOS5_GPIO_G0_NR (8) -#define EXYNOS5_GPIO_G1_NR (8) -#define EXYNOS5_GPIO_G2_NR (2) -#define EXYNOS5_GPIO_H0_NR (4) -#define EXYNOS5_GPIO_H1_NR (8) -#define EXYNOS5_GPIO_V0_NR (8) -#define EXYNOS5_GPIO_V1_NR (8) -#define EXYNOS5_GPIO_V2_NR (8) -#define EXYNOS5_GPIO_V3_NR (8) -#define EXYNOS5_GPIO_V4_NR (2) -#define EXYNOS5_GPIO_Z_NR (7) - -/* EXYNOS5 GPIO bank numbers */ - -enum exynos5_gpio_number { - EXYNOS5_GPIO_A0_START = 0, - EXYNOS5_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A0), - EXYNOS5_GPIO_A2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A1), - EXYNOS5_GPIO_B0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A2), - EXYNOS5_GPIO_B1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B0), - EXYNOS5_GPIO_B2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B1), - EXYNOS5_GPIO_B3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B2), - EXYNOS5_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B3), - EXYNOS5_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0), - EXYNOS5_GPIO_C2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1), - EXYNOS5_GPIO_C3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2), - EXYNOS5_GPIO_C4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3), - EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4), - EXYNOS5_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0), - EXYNOS5_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1), - EXYNOS5_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0), - EXYNOS5_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y1), - EXYNOS5_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y2), - EXYNOS5_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y3), - EXYNOS5_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y4), - EXYNOS5_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y5), - EXYNOS5_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y6), - EXYNOS5_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X0), - EXYNOS5_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X1), - EXYNOS5_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X2), - EXYNOS5_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X3), - EXYNOS5_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E0), - EXYNOS5_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E1), - EXYNOS5_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F0), - EXYNOS5_GPIO_G0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F1), - EXYNOS5_GPIO_G1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G0), - EXYNOS5_GPIO_G2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G1), - EXYNOS5_GPIO_H0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G2), - EXYNOS5_GPIO_H1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H0), - EXYNOS5_GPIO_V0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H1), - EXYNOS5_GPIO_V1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V0), - EXYNOS5_GPIO_V2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V1), - EXYNOS5_GPIO_V3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V2), - EXYNOS5_GPIO_V4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V3), - EXYNOS5_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V4), -}; - -/* EXYNOS5 GPIO number definitions */ - -#define EXYNOS5_GPA0(_nr) (EXYNOS5_GPIO_A0_START + (_nr)) -#define EXYNOS5_GPA1(_nr) (EXYNOS5_GPIO_A1_START + (_nr)) -#define EXYNOS5_GPA2(_nr) (EXYNOS5_GPIO_A2_START + (_nr)) -#define EXYNOS5_GPB0(_nr) (EXYNOS5_GPIO_B0_START + (_nr)) -#define EXYNOS5_GPB1(_nr) (EXYNOS5_GPIO_B1_START + (_nr)) -#define EXYNOS5_GPB2(_nr) (EXYNOS5_GPIO_B2_START + (_nr)) -#define EXYNOS5_GPB3(_nr) (EXYNOS5_GPIO_B3_START + (_nr)) -#define EXYNOS5_GPC0(_nr) (EXYNOS5_GPIO_C0_START + (_nr)) -#define EXYNOS5_GPC1(_nr) (EXYNOS5_GPIO_C1_START + (_nr)) -#define EXYNOS5_GPC2(_nr) (EXYNOS5_GPIO_C2_START + (_nr)) -#define EXYNOS5_GPC3(_nr) (EXYNOS5_GPIO_C3_START + (_nr)) -#define EXYNOS5_GPC4(_nr) (EXYNOS5_GPIO_C4_START + (_nr)) -#define EXYNOS5_GPD0(_nr) (EXYNOS5_GPIO_D0_START + (_nr)) -#define EXYNOS5_GPD1(_nr) (EXYNOS5_GPIO_D1_START + (_nr)) -#define EXYNOS5_GPY0(_nr) (EXYNOS5_GPIO_Y0_START + (_nr)) -#define EXYNOS5_GPY1(_nr) (EXYNOS5_GPIO_Y1_START + (_nr)) -#define EXYNOS5_GPY2(_nr) (EXYNOS5_GPIO_Y2_START + (_nr)) -#define EXYNOS5_GPY3(_nr) (EXYNOS5_GPIO_Y3_START + (_nr)) -#define EXYNOS5_GPY4(_nr) (EXYNOS5_GPIO_Y4_START + (_nr)) -#define EXYNOS5_GPY5(_nr) (EXYNOS5_GPIO_Y5_START + (_nr)) -#define EXYNOS5_GPY6(_nr) (EXYNOS5_GPIO_Y6_START + (_nr)) -#define EXYNOS5_GPX0(_nr) (EXYNOS5_GPIO_X0_START + (_nr)) -#define EXYNOS5_GPX1(_nr) (EXYNOS5_GPIO_X1_START + (_nr)) -#define EXYNOS5_GPX2(_nr) (EXYNOS5_GPIO_X2_START + (_nr)) -#define EXYNOS5_GPX3(_nr) (EXYNOS5_GPIO_X3_START + (_nr)) -#define EXYNOS5_GPE0(_nr) (EXYNOS5_GPIO_E0_START + (_nr)) -#define EXYNOS5_GPE1(_nr) (EXYNOS5_GPIO_E1_START + (_nr)) -#define EXYNOS5_GPF0(_nr) (EXYNOS5_GPIO_F0_START + (_nr)) -#define EXYNOS5_GPF1(_nr) (EXYNOS5_GPIO_F1_START + (_nr)) -#define EXYNOS5_GPG0(_nr) (EXYNOS5_GPIO_G0_START + (_nr)) -#define EXYNOS5_GPG1(_nr) (EXYNOS5_GPIO_G1_START + (_nr)) -#define EXYNOS5_GPG2(_nr) (EXYNOS5_GPIO_G2_START + (_nr)) -#define EXYNOS5_GPH0(_nr) (EXYNOS5_GPIO_H0_START + (_nr)) -#define EXYNOS5_GPH1(_nr) (EXYNOS5_GPIO_H1_START + (_nr)) -#define EXYNOS5_GPV0(_nr) (EXYNOS5_GPIO_V0_START + (_nr)) -#define EXYNOS5_GPV1(_nr) (EXYNOS5_GPIO_V1_START + (_nr)) -#define EXYNOS5_GPV2(_nr) (EXYNOS5_GPIO_V2_START + (_nr)) -#define EXYNOS5_GPV3(_nr) (EXYNOS5_GPIO_V3_START + (_nr)) -#define EXYNOS5_GPV4(_nr) (EXYNOS5_GPIO_V4_START + (_nr)) -#define EXYNOS5_GPZ(_nr) (EXYNOS5_GPIO_Z_START + (_nr)) - -/* the end of the EXYNOS5 specific gpios */ - -#define EXYNOS5_GPIO_END (EXYNOS5_GPZ(EXYNOS5_GPIO_Z_NR) + 1) - -/* actually, EXYNOS5_GPIO_END is bigger than EXYNOS4 */ - -#define S3C_GPIO_END (EXYNOS5_GPIO_END) - -/* define the number of gpios */ - -#define ARCH_NR_GPIOS (CONFIG_SAMSUNG_GPIO_EXTRA + S3C_GPIO_END) - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h deleted file mode 100644 index c72f59d91fce..000000000000 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ /dev/null @@ -1,476 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* PPI: Private Peripheral Interrupt */ - -#define IRQ_PPI(x) (x + 16) - -/* SPI: Shared Peripheral Interrupt */ - -#define IRQ_SPI(x) (x + 32) - -/* COMBINER */ - -#define MAX_IRQ_IN_COMBINER 8 -#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128)) -#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) - -/* For EXYNOS4 and EXYNOS5 */ - -#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32) - -/* For EXYNOS4 SoCs */ - -#define EXYNOS4_IRQ_EINT0 IRQ_SPI(16) -#define EXYNOS4_IRQ_EINT1 IRQ_SPI(17) -#define EXYNOS4_IRQ_EINT2 IRQ_SPI(18) -#define EXYNOS4_IRQ_EINT3 IRQ_SPI(19) -#define EXYNOS4_IRQ_EINT4 IRQ_SPI(20) -#define EXYNOS4_IRQ_EINT5 IRQ_SPI(21) -#define EXYNOS4_IRQ_EINT6 IRQ_SPI(22) -#define EXYNOS4_IRQ_EINT7 IRQ_SPI(23) -#define EXYNOS4_IRQ_EINT8 IRQ_SPI(24) -#define EXYNOS4_IRQ_EINT9 IRQ_SPI(25) -#define EXYNOS4_IRQ_EINT10 IRQ_SPI(26) -#define EXYNOS4_IRQ_EINT11 IRQ_SPI(27) -#define EXYNOS4_IRQ_EINT12 IRQ_SPI(28) -#define EXYNOS4_IRQ_EINT13 IRQ_SPI(29) -#define EXYNOS4_IRQ_EINT14 IRQ_SPI(30) -#define EXYNOS4_IRQ_EINT15 IRQ_SPI(31) - -#define EXYNOS4_IRQ_MDMA0 IRQ_SPI(33) -#define EXYNOS4_IRQ_MDMA1 IRQ_SPI(34) -#define EXYNOS4_IRQ_PDMA0 IRQ_SPI(35) -#define EXYNOS4_IRQ_PDMA1 IRQ_SPI(36) -#define EXYNOS4_IRQ_TIMER0_VIC IRQ_SPI(37) -#define EXYNOS4_IRQ_TIMER1_VIC IRQ_SPI(38) -#define EXYNOS4_IRQ_TIMER2_VIC IRQ_SPI(39) -#define EXYNOS4_IRQ_TIMER3_VIC IRQ_SPI(40) -#define EXYNOS4_IRQ_TIMER4_VIC IRQ_SPI(41) -#define EXYNOS4_IRQ_MCT_L0 IRQ_SPI(42) -#define EXYNOS4_IRQ_WDT IRQ_SPI(43) -#define EXYNOS4_IRQ_RTC_ALARM IRQ_SPI(44) -#define EXYNOS4_IRQ_RTC_TIC IRQ_SPI(45) -#define EXYNOS4_IRQ_GPIO_XB IRQ_SPI(46) -#define EXYNOS4_IRQ_GPIO_XA IRQ_SPI(47) -#define EXYNOS4_IRQ_MCT_L1 IRQ_SPI(48) - -#define EXYNOS4_IRQ_UART0 IRQ_SPI(52) -#define EXYNOS4_IRQ_UART1 IRQ_SPI(53) -#define EXYNOS4_IRQ_UART2 IRQ_SPI(54) -#define EXYNOS4_IRQ_UART3 IRQ_SPI(55) -#define EXYNOS4_IRQ_UART4 IRQ_SPI(56) -#define EXYNOS4_IRQ_MCT_G0 IRQ_SPI(57) -#define EXYNOS4_IRQ_IIC IRQ_SPI(58) -#define EXYNOS4_IRQ_IIC1 IRQ_SPI(59) -#define EXYNOS4_IRQ_IIC2 IRQ_SPI(60) -#define EXYNOS4_IRQ_IIC3 IRQ_SPI(61) -#define EXYNOS4_IRQ_IIC4 IRQ_SPI(62) -#define EXYNOS4_IRQ_IIC5 IRQ_SPI(63) -#define EXYNOS4_IRQ_IIC6 IRQ_SPI(64) -#define EXYNOS4_IRQ_IIC7 IRQ_SPI(65) -#define EXYNOS4_IRQ_SPI0 IRQ_SPI(66) -#define EXYNOS4_IRQ_SPI1 IRQ_SPI(67) -#define EXYNOS4_IRQ_SPI2 IRQ_SPI(68) - -#define EXYNOS4_IRQ_USB_HOST IRQ_SPI(70) -#define EXYNOS4_IRQ_USB_HSOTG IRQ_SPI(71) -#define EXYNOS4_IRQ_MODEM_IF IRQ_SPI(72) -#define EXYNOS4_IRQ_HSMMC0 IRQ_SPI(73) -#define EXYNOS4_IRQ_HSMMC1 IRQ_SPI(74) -#define EXYNOS4_IRQ_HSMMC2 IRQ_SPI(75) -#define EXYNOS4_IRQ_HSMMC3 IRQ_SPI(76) -#define EXYNOS4_IRQ_DWMCI IRQ_SPI(77) - -#define EXYNOS4_IRQ_MIPI_CSIS0 IRQ_SPI(78) -#define EXYNOS4_IRQ_MIPI_CSIS1 IRQ_SPI(80) - -#define EXYNOS4_IRQ_ONENAND_AUDI IRQ_SPI(82) -#define EXYNOS4_IRQ_ROTATOR IRQ_SPI(83) -#define EXYNOS4_IRQ_FIMC0 IRQ_SPI(84) -#define EXYNOS4_IRQ_FIMC1 IRQ_SPI(85) -#define EXYNOS4_IRQ_FIMC2 IRQ_SPI(86) -#define EXYNOS4_IRQ_FIMC3 IRQ_SPI(87) -#define EXYNOS4_IRQ_JPEG IRQ_SPI(88) -#define EXYNOS4_IRQ_2D IRQ_SPI(89) -#define EXYNOS4_IRQ_PCIE IRQ_SPI(90) - -#define EXYNOS4_IRQ_MIXER IRQ_SPI(91) -#define EXYNOS4_IRQ_HDMI IRQ_SPI(92) -#define EXYNOS4_IRQ_IIC_HDMIPHY IRQ_SPI(93) -#define EXYNOS4_IRQ_MFC IRQ_SPI(94) -#define EXYNOS4_IRQ_SDO IRQ_SPI(95) - -#define EXYNOS4_IRQ_AUDIO_SS IRQ_SPI(96) -#define EXYNOS4_IRQ_I2S0 IRQ_SPI(97) -#define EXYNOS4_IRQ_I2S1 IRQ_SPI(98) -#define EXYNOS4_IRQ_I2S2 IRQ_SPI(99) -#define EXYNOS4_IRQ_AC97 IRQ_SPI(100) - -#define EXYNOS4_IRQ_SPDIF IRQ_SPI(104) -#define EXYNOS4_IRQ_ADC0 IRQ_SPI(105) -#define EXYNOS4_IRQ_PEN0 IRQ_SPI(106) -#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107) -#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108) -#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109) -#define EXYNOS4_IRQ_POWER_PMU IRQ_SPI(110) -#define EXYNOS4_IRQ_GPS IRQ_SPI(111) -#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) -#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113) - -#define EXYNOS4_IRQ_TSI IRQ_SPI(115) -#define EXYNOS4_IRQ_SATA IRQ_SPI(116) - -#define EXYNOS4_IRQ_PMU COMBINER_IRQ(2, 2) -#define EXYNOS4_IRQ_PMU_CPU1 COMBINER_IRQ(3, 2) -#define EXYNOS4_IRQ_PMU_CPU2 COMBINER_IRQ(18, 2) -#define EXYNOS4_IRQ_PMU_CPU3 COMBINER_IRQ(19, 2) - -#define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4) -#define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4) - -#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) -#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) -#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) -#define EXYNOS4_IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3) -#define EXYNOS4_IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4) -#define EXYNOS4_IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5) -#define EXYNOS4_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6) -#define EXYNOS4_IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7) - -#define EXYNOS4_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0) -#define EXYNOS4_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1) -#define EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2) -#define EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3) -#define EXYNOS4_IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4) -#define EXYNOS4_IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5) -#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) -#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) - -#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE0_0 COMBINER_IRQ(16, 0) -#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE1_0 COMBINER_IRQ(16, 1) -#define EXYNOS4_IRQ_SYSMMU_FIMC_ISP_0 COMBINER_IRQ(16, 2) -#define EXYNOS4_IRQ_SYSMMU_FIMC_DRC_0 COMBINER_IRQ(16, 3) -#define EXYNOS4_IRQ_SYSMMU_FIMC_FD_0 COMBINER_IRQ(16, 4) -#define EXYNOS4_IRQ_SYSMMU_FIMC_CX_0 COMBINER_IRQ(16, 5) - -#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0) -#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) -#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) - -#define EXYNOS4210_MAX_COMBINER_NR 16 -#define EXYNOS4212_MAX_COMBINER_NR 18 -#define EXYNOS4412_MAX_COMBINER_NR 20 -#define EXYNOS4_MAX_COMBINER_NR EXYNOS4412_MAX_COMBINER_NR - -#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16 -#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9 - -/* - * For Compatibility: - * the default is for EXYNOS4, and - * for exynos5, should be re-mapped at function - */ - -#define IRQ_TIMER0_VIC EXYNOS4_IRQ_TIMER0_VIC -#define IRQ_TIMER1_VIC EXYNOS4_IRQ_TIMER1_VIC -#define IRQ_TIMER2_VIC EXYNOS4_IRQ_TIMER2_VIC -#define IRQ_TIMER3_VIC EXYNOS4_IRQ_TIMER3_VIC -#define IRQ_TIMER4_VIC EXYNOS4_IRQ_TIMER4_VIC - -#define IRQ_WDT EXYNOS4_IRQ_WDT -#define IRQ_RTC_ALARM EXYNOS4_IRQ_RTC_ALARM -#define IRQ_RTC_TIC EXYNOS4_IRQ_RTC_TIC -#define IRQ_GPIO_XB EXYNOS4_IRQ_GPIO_XB -#define IRQ_GPIO_XA EXYNOS4_IRQ_GPIO_XA - -#define IRQ_IIC EXYNOS4_IRQ_IIC -#define IRQ_IIC1 EXYNOS4_IRQ_IIC1 -#define IRQ_IIC3 EXYNOS4_IRQ_IIC3 -#define IRQ_IIC5 EXYNOS4_IRQ_IIC5 -#define IRQ_IIC6 EXYNOS4_IRQ_IIC6 -#define IRQ_IIC7 EXYNOS4_IRQ_IIC7 - -#define IRQ_SPI0 EXYNOS4_IRQ_SPI0 -#define IRQ_SPI1 EXYNOS4_IRQ_SPI1 -#define IRQ_SPI2 EXYNOS4_IRQ_SPI2 - -#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST -#define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG - -#define IRQ_HSMMC0 EXYNOS4_IRQ_HSMMC0 -#define IRQ_HSMMC1 EXYNOS4_IRQ_HSMMC1 -#define IRQ_HSMMC2 EXYNOS4_IRQ_HSMMC2 -#define IRQ_HSMMC3 EXYNOS4_IRQ_HSMMC3 - -#define IRQ_MIPI_CSIS0 EXYNOS4_IRQ_MIPI_CSIS0 - -#define IRQ_ONENAND_AUDI EXYNOS4_IRQ_ONENAND_AUDI - -#define IRQ_FIMC0 EXYNOS4_IRQ_FIMC0 -#define IRQ_FIMC1 EXYNOS4_IRQ_FIMC1 -#define IRQ_FIMC2 EXYNOS4_IRQ_FIMC2 -#define IRQ_FIMC3 EXYNOS4_IRQ_FIMC3 -#define IRQ_JPEG EXYNOS4_IRQ_JPEG -#define IRQ_2D EXYNOS4_IRQ_2D - -#define IRQ_MIXER EXYNOS4_IRQ_MIXER -#define IRQ_HDMI EXYNOS4_IRQ_HDMI -#define IRQ_IIC_HDMIPHY EXYNOS4_IRQ_IIC_HDMIPHY -#define IRQ_MFC EXYNOS4_IRQ_MFC -#define IRQ_SDO EXYNOS4_IRQ_SDO - -#define IRQ_I2S0 EXYNOS4_IRQ_I2S0 - -#define IRQ_ADC EXYNOS4_IRQ_ADC0 -#define IRQ_TC EXYNOS4_IRQ_PEN0 - -#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD - -#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO -#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC -#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM - -#define IRQ_GPIO1_NR_GROUPS EXYNOS4_IRQ_GPIO1_NR_GROUPS -#define IRQ_GPIO2_NR_GROUPS EXYNOS4_IRQ_GPIO2_NR_GROUPS - -/* For EXYNOS5 SoCs */ - -#define EXYNOS5_IRQ_MDMA0 IRQ_SPI(33) -#define EXYNOS5_IRQ_PDMA0 IRQ_SPI(34) -#define EXYNOS5_IRQ_PDMA1 IRQ_SPI(35) -#define EXYNOS5_IRQ_TIMER0_VIC IRQ_SPI(36) -#define EXYNOS5_IRQ_TIMER1_VIC IRQ_SPI(37) -#define EXYNOS5_IRQ_TIMER2_VIC IRQ_SPI(38) -#define EXYNOS5_IRQ_TIMER3_VIC IRQ_SPI(39) -#define EXYNOS5_IRQ_TIMER4_VIC IRQ_SPI(40) -#define EXYNOS5_IRQ_RTIC IRQ_SPI(41) -#define EXYNOS5_IRQ_WDT IRQ_SPI(42) -#define EXYNOS5_IRQ_RTC_ALARM IRQ_SPI(43) -#define EXYNOS5_IRQ_RTC_TIC IRQ_SPI(44) -#define EXYNOS5_IRQ_GPIO_XB IRQ_SPI(45) -#define EXYNOS5_IRQ_GPIO_XA IRQ_SPI(46) -#define EXYNOS5_IRQ_GPIO IRQ_SPI(47) -#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48) -#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49) -#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50) -#define EXYNOS5_IRQ_IIC IRQ_SPI(56) -#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57) -#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58) -#define EXYNOS5_IRQ_IIC3 IRQ_SPI(59) -#define EXYNOS5_IRQ_IIC4 IRQ_SPI(60) -#define EXYNOS5_IRQ_IIC5 IRQ_SPI(61) -#define EXYNOS5_IRQ_IIC6 IRQ_SPI(62) -#define EXYNOS5_IRQ_IIC7 IRQ_SPI(63) -#define EXYNOS5_IRQ_IIC_HDMIPHY IRQ_SPI(64) -#define EXYNOS5_IRQ_TMU IRQ_SPI(65) -#define EXYNOS5_IRQ_FIQ_0 IRQ_SPI(66) -#define EXYNOS5_IRQ_FIQ_1 IRQ_SPI(67) -#define EXYNOS5_IRQ_SPI0 IRQ_SPI(68) -#define EXYNOS5_IRQ_SPI1 IRQ_SPI(69) -#define EXYNOS5_IRQ_SPI2 IRQ_SPI(70) -#define EXYNOS5_IRQ_USB_HOST IRQ_SPI(71) -#define EXYNOS5_IRQ_USB3_DRD IRQ_SPI(72) -#define EXYNOS5_IRQ_MIPI_HSI IRQ_SPI(73) -#define EXYNOS5_IRQ_USB_HSOTG IRQ_SPI(74) -#define EXYNOS5_IRQ_HSMMC0 IRQ_SPI(75) -#define EXYNOS5_IRQ_HSMMC1 IRQ_SPI(76) -#define EXYNOS5_IRQ_HSMMC2 IRQ_SPI(77) -#define EXYNOS5_IRQ_HSMMC3 IRQ_SPI(78) -#define EXYNOS5_IRQ_MIPICSI0 IRQ_SPI(79) -#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80) -#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81) -#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82) -#define EXYNOS5_IRQ_WDT_IOP IRQ_SPI(83) -#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84) -#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85) -#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86) -#define EXYNOS5_IRQ_GSC2 IRQ_SPI(87) -#define EXYNOS5_IRQ_GSC3 IRQ_SPI(88) -#define EXYNOS5_IRQ_JPEG IRQ_SPI(89) -#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90) -#define EXYNOS5_IRQ_2D IRQ_SPI(91) -#define EXYNOS5_IRQ_EFNFCON_0 IRQ_SPI(92) -#define EXYNOS5_IRQ_EFNFCON_1 IRQ_SPI(93) -#define EXYNOS5_IRQ_MIXER IRQ_SPI(94) -#define EXYNOS5_IRQ_HDMI IRQ_SPI(95) -#define EXYNOS5_IRQ_MFC IRQ_SPI(96) -#define EXYNOS5_IRQ_AUDIO_SS IRQ_SPI(97) -#define EXYNOS5_IRQ_I2S0 IRQ_SPI(98) -#define EXYNOS5_IRQ_I2S1 IRQ_SPI(99) -#define EXYNOS5_IRQ_I2S2 IRQ_SPI(100) -#define EXYNOS5_IRQ_AC97 IRQ_SPI(101) -#define EXYNOS5_IRQ_PCM0 IRQ_SPI(102) -#define EXYNOS5_IRQ_PCM1 IRQ_SPI(103) -#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104) -#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105) -#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106) -#define EXYNOS5_IRQ_ADC1 IRQ_SPI(107) -#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108) -#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109) -#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110) -#define EXYNOS5_IRQ_EAGLE_PMU IRQ_SPI(111) -#define EXYNOS5_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) -#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113) -#define EXYNOS5_IRQ_CEC IRQ_SPI(114) -#define EXYNOS5_IRQ_SATA IRQ_SPI(115) - -#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123) -#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124) -#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125) -#define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126) -#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127) - -/* EXYNOS5440 */ - -#define EXYNOS5440_IRQ_UART0 IRQ_SPI(2) -#define EXYNOS5440_IRQ_UART1 IRQ_SPI(3) - -#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2) - -#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0) -#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1) -#define EXYNOS5_IRQ_SYSMMU_GSC1_0 COMBINER_IRQ(2, 2) -#define EXYNOS5_IRQ_SYSMMU_GSC1_1 COMBINER_IRQ(2, 3) -#define EXYNOS5_IRQ_SYSMMU_GSC2_0 COMBINER_IRQ(2, 4) -#define EXYNOS5_IRQ_SYSMMU_GSC2_1 COMBINER_IRQ(2, 5) -#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6) -#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7) - -#define EXYNOS5_IRQ_SYSMMU_LITE2_0 COMBINER_IRQ(3, 0) -#define EXYNOS5_IRQ_SYSMMU_LITE2_1 COMBINER_IRQ(3, 1) -#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2) -#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3) -#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4) -#define EXYNOS5_IRQ_SYSMMU_LITE0_1 COMBINER_IRQ(3, 5) -#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_0 COMBINER_IRQ(3, 6) -#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_1 COMBINER_IRQ(3, 7) - -#define EXYNOS5_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(4, 0) -#define EXYNOS5_IRQ_SYSMMU_ROTATOR_1 COMBINER_IRQ(4, 1) -#define EXYNOS5_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 2) -#define EXYNOS5_IRQ_SYSMMU_JPEG_1 COMBINER_IRQ(4, 3) - -#define EXYNOS5_IRQ_SYSMMU_FD_0 COMBINER_IRQ(5, 0) -#define EXYNOS5_IRQ_SYSMMU_FD_1 COMBINER_IRQ(5, 1) -#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_0 COMBINER_IRQ(5, 2) -#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_1 COMBINER_IRQ(5, 3) -#define EXYNOS5_IRQ_SYSMMU_MCUISP_0 COMBINER_IRQ(5, 4) -#define EXYNOS5_IRQ_SYSMMU_MCUISP_1 COMBINER_IRQ(5, 5) -#define EXYNOS5_IRQ_SYSMMU_3DNR_0 COMBINER_IRQ(5, 6) -#define EXYNOS5_IRQ_SYSMMU_3DNR_1 COMBINER_IRQ(5, 7) - -#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0) -#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1) -#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(6, 2) -#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(6, 3) -#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4) -#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5) -#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6) -#define EXYNOS5_IRQ_SYSMMU_SSS_1 COMBINER_IRQ(6, 7) - -#define EXYNOS5_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(7, 0) -#define EXYNOS5_IRQ_SYSMMU_MDMA0_1 COMBINER_IRQ(7, 1) -#define EXYNOS5_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(7, 2) -#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3) -#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4) -#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5) - -#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(8, 5) -#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(8, 6) - -#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4) -#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5) - -#define EXYNOS5_IRQ_DP COMBINER_IRQ(10, 3) -#define EXYNOS5_IRQ_SYSMMU_DIS0_0 COMBINER_IRQ(10, 4) -#define EXYNOS5_IRQ_SYSMMU_DIS0_1 COMBINER_IRQ(10, 5) -#define EXYNOS5_IRQ_SYSMMU_ISP_0 COMBINER_IRQ(10, 6) -#define EXYNOS5_IRQ_SYSMMU_ISP_1 COMBINER_IRQ(10, 7) - -#define EXYNOS5_IRQ_SYSMMU_ODC_0 COMBINER_IRQ(11, 0) -#define EXYNOS5_IRQ_SYSMMU_ODC_1 COMBINER_IRQ(11, 1) -#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6) -#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7) - -#define EXYNOS5_IRQ_MDMA1_ABORT COMBINER_IRQ(13, 1) - -#define EXYNOS5_IRQ_MDMA0_ABORT COMBINER_IRQ(15, 3) - -#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4) -#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5) -#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6) - -#define EXYNOS5_IRQ_ARMIOP_GIC COMBINER_IRQ(19, 0) -#define EXYNOS5_IRQ_ARMISP_GIC COMBINER_IRQ(19, 1) -#define EXYNOS5_IRQ_IOP_GIC COMBINER_IRQ(19, 3) -#define EXYNOS5_IRQ_ISP_GIC COMBINER_IRQ(19, 4) - -#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4) - -#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0) - -#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0) -#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1) -#define EXYNOS5_IRQ_SYSMMU_LITE1_1 COMBINER_IRQ(24, 2) -#define EXYNOS5_IRQ_SYSMMU_2D_0 COMBINER_IRQ(24, 5) -#define EXYNOS5_IRQ_SYSMMU_2D_1 COMBINER_IRQ(24, 6) - -#define EXYNOS5_IRQ_EINT2 COMBINER_IRQ(25, 0) -#define EXYNOS5_IRQ_EINT3 COMBINER_IRQ(25, 1) - -#define EXYNOS5_IRQ_EINT4 COMBINER_IRQ(26, 0) -#define EXYNOS5_IRQ_EINT5 COMBINER_IRQ(26, 1) - -#define EXYNOS5_IRQ_EINT6 COMBINER_IRQ(27, 0) -#define EXYNOS5_IRQ_EINT7 COMBINER_IRQ(27, 1) - -#define EXYNOS5_IRQ_EINT8 COMBINER_IRQ(28, 0) -#define EXYNOS5_IRQ_EINT9 COMBINER_IRQ(28, 1) - -#define EXYNOS5_IRQ_EINT10 COMBINER_IRQ(29, 0) -#define EXYNOS5_IRQ_EINT11 COMBINER_IRQ(29, 1) - -#define EXYNOS5_IRQ_EINT12 COMBINER_IRQ(30, 0) -#define EXYNOS5_IRQ_EINT13 COMBINER_IRQ(30, 1) - -#define EXYNOS5_IRQ_EINT14 COMBINER_IRQ(31, 0) -#define EXYNOS5_IRQ_EINT15 COMBINER_IRQ(31, 1) - -#define EXYNOS5_MAX_COMBINER_NR 32 - -#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 14 -#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9 -#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5 -#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1 - -#define MAX_COMBINER_NR (EXYNOS4_MAX_COMBINER_NR > EXYNOS5_MAX_COMBINER_NR ? \ - EXYNOS4_MAX_COMBINER_NR : EXYNOS5_MAX_COMBINER_NR) - -#define S5P_EINT_BASE1 COMBINER_IRQ(MAX_COMBINER_NR, 0) -#define S5P_EINT_BASE2 (S5P_EINT_BASE1 + 16) -#define S5P_GPIOINT_BASE (S5P_EINT_BASE1 + 32) -#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) -#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) - -/* Set the default NR_IRQS */ -#define EXYNOS_NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) - -#ifndef CONFIG_SPARSE_IRQ -#define NR_IRQS EXYNOS_NR_IRQS -#endif - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 92b29bb583cb..7b046b59d9ec 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -30,31 +30,6 @@ #define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 #define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 -#define EXYNOS4_PA_FIMC0 0x11800000 -#define EXYNOS4_PA_FIMC1 0x11810000 -#define EXYNOS4_PA_FIMC2 0x11820000 -#define EXYNOS4_PA_FIMC3 0x11830000 - -#define EXYNOS4_PA_JPEG 0x11840000 - -/* x = 0...1 */ -#define EXYNOS4_PA_FIMC_LITE(x) (0x12390000 + ((x) * 0x10000)) - -#define EXYNOS4_PA_G2D 0x12800000 - -#define EXYNOS4_PA_I2S0 0x03830000 -#define EXYNOS4_PA_I2S1 0xE3100000 -#define EXYNOS4_PA_I2S2 0xE2A00000 - -#define EXYNOS4_PA_PCM0 0x03840000 -#define EXYNOS4_PA_PCM1 0x13980000 -#define EXYNOS4_PA_PCM2 0x13990000 - -#define EXYNOS4_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) - -#define EXYNOS4_PA_ONENAND 0x0C000000 -#define EXYNOS4_PA_ONENAND_DMA 0x0C600000 - #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000 @@ -71,10 +46,6 @@ #define EXYNOS4_PA_WATCHDOG 0x10060000 #define EXYNOS5_PA_WATCHDOG 0x101D0000 -#define EXYNOS4_PA_RTC 0x10070000 - -#define EXYNOS4_PA_KEYPAD 0x100A0000 - #define EXYNOS4_PA_DMC0 0x10400000 #define EXYNOS4_PA_DMC1 0x10410000 @@ -87,207 +58,22 @@ #define EXYNOS5_PA_GIC_DIST 0x10481000 #define EXYNOS4_PA_COREPERI 0x10500000 -#define EXYNOS4_PA_TWD 0x10500600 #define EXYNOS4_PA_L2CC 0x10502000 -#define EXYNOS4_PA_TMU 0x100C0000 - -#define EXYNOS4_PA_MDMA0 0x10810000 -#define EXYNOS4_PA_MDMA1 0x12850000 -#define EXYNOS4_PA_S_MDMA1 0x12840000 -#define EXYNOS4_PA_PDMA0 0x12680000 -#define EXYNOS4_PA_PDMA1 0x12690000 -#define EXYNOS5_PA_MDMA0 0x10800000 -#define EXYNOS5_PA_MDMA1 0x11C10000 -#define EXYNOS5_PA_PDMA0 0x121A0000 -#define EXYNOS5_PA_PDMA1 0x121B0000 - -#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 -#define EXYNOS4_PA_SYSMMU_2D_ACP 0x10A40000 -#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 -#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000 -#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000 -#define EXYNOS4_PA_SYSMMU_FIMC2 0x11A40000 -#define EXYNOS4_PA_SYSMMU_FIMC3 0x11A50000 -#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000 -#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000 -#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000 -#define EXYNOS4_PA_SYSMMU_FIMC_ISP 0x12260000 -#define EXYNOS4_PA_SYSMMU_FIMC_DRC 0x12270000 -#define EXYNOS4_PA_SYSMMU_FIMC_FD 0x122A0000 -#define EXYNOS4_PA_SYSMMU_ISPCPU 0x122B0000 -#define EXYNOS4_PA_SYSMMU_FIMC_LITE0 0x123B0000 -#define EXYNOS4_PA_SYSMMU_FIMC_LITE1 0x123C0000 -#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000 -#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000 -#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000 -#define EXYNOS4_PA_SYSMMU_MDMA2 0x12A40000 -#define EXYNOS4_PA_SYSMMU_TV 0x12E20000 -#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000 -#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000 - -#define EXYNOS5_PA_GSC0 0x13E00000 -#define EXYNOS5_PA_GSC1 0x13E10000 -#define EXYNOS5_PA_GSC2 0x13E20000 -#define EXYNOS5_PA_GSC3 0x13E30000 - -#define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000 -#define EXYNOS5_PA_SYSMMU_SSS 0x10A50000 -#define EXYNOS5_PA_SYSMMU_2D 0x10A60000 -#define EXYNOS5_PA_SYSMMU_MFC_L 0x11200000 -#define EXYNOS5_PA_SYSMMU_MFC_R 0x11210000 -#define EXYNOS5_PA_SYSMMU_ROTATOR 0x11D40000 -#define EXYNOS5_PA_SYSMMU_MDMA2 0x11D50000 -#define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000 -#define EXYNOS5_PA_SYSMMU_IOP 0x12360000 -#define EXYNOS5_PA_SYSMMU_RTIC 0x12370000 -#define EXYNOS5_PA_SYSMMU_ISP 0x13260000 -#define EXYNOS5_PA_SYSMMU_DRC 0x12370000 -#define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000 -#define EXYNOS5_PA_SYSMMU_SCALERP 0x13290000 -#define EXYNOS5_PA_SYSMMU_FD 0x132A0000 -#define EXYNOS5_PA_SYSMMU_ISPCPU 0x132B0000 -#define EXYNOS5_PA_SYSMMU_ODC 0x132C0000 -#define EXYNOS5_PA_SYSMMU_DIS0 0x132D0000 -#define EXYNOS5_PA_SYSMMU_DIS1 0x132E0000 -#define EXYNOS5_PA_SYSMMU_3DNR 0x132F0000 -#define EXYNOS5_PA_SYSMMU_LITE0 0x13C40000 -#define EXYNOS5_PA_SYSMMU_LITE1 0x13C50000 -#define EXYNOS5_PA_SYSMMU_GSC0 0x13E80000 -#define EXYNOS5_PA_SYSMMU_GSC1 0x13E90000 -#define EXYNOS5_PA_SYSMMU_GSC2 0x13EA0000 -#define EXYNOS5_PA_SYSMMU_GSC3 0x13EB0000 -#define EXYNOS5_PA_SYSMMU_FIMD1 0x14640000 -#define EXYNOS5_PA_SYSMMU_TV 0x14650000 - -#define EXYNOS4_PA_SPI0 0x13920000 -#define EXYNOS4_PA_SPI1 0x13930000 -#define EXYNOS4_PA_SPI2 0x13940000 -#define EXYNOS5_PA_SPI0 0x12D20000 -#define EXYNOS5_PA_SPI1 0x12D30000 -#define EXYNOS5_PA_SPI2 0x12D40000 - -#define EXYNOS4_PA_GPIO1 0x11400000 -#define EXYNOS4_PA_GPIO2 0x11000000 -#define EXYNOS4_PA_GPIO3 0x03860000 -#define EXYNOS5_PA_GPIO1 0x11400000 -#define EXYNOS5_PA_GPIO2 0x13400000 -#define EXYNOS5_PA_GPIO3 0x10D10000 -#define EXYNOS5_PA_GPIO4 0x03860000 - -#define EXYNOS4_PA_MIPI_CSIS0 0x11880000 -#define EXYNOS4_PA_MIPI_CSIS1 0x11890000 - -#define EXYNOS4_PA_FIMD0 0x11C00000 - -#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) -#define EXYNOS4_PA_DWMCI 0x12550000 -#define EXYNOS5_PA_DWMCI0 0x12200000 -#define EXYNOS5_PA_DWMCI1 0x12210000 -#define EXYNOS5_PA_DWMCI2 0x12220000 -#define EXYNOS5_PA_DWMCI3 0x12230000 - -#define EXYNOS4_PA_HSOTG 0x12480000 -#define EXYNOS4_PA_USB_HSPHY 0x125B0000 - -#define EXYNOS4_PA_SATA 0x12560000 -#define EXYNOS4_PA_SATAPHY 0x125D0000 -#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000 - #define EXYNOS4_PA_SROMC 0x12570000 #define EXYNOS5_PA_SROMC 0x12250000 -#define EXYNOS4_PA_EHCI 0x12580000 -#define EXYNOS4_PA_OHCI 0x12590000 #define EXYNOS4_PA_HSPHY 0x125B0000 -#define EXYNOS4_PA_MFC 0x13400000 #define EXYNOS4_PA_UART 0x13800000 #define EXYNOS5_PA_UART 0x12C00000 -#define EXYNOS4_PA_VP 0x12C00000 -#define EXYNOS4_PA_MIXER 0x12C10000 -#define EXYNOS4_PA_SDO 0x12C20000 -#define EXYNOS4_PA_HDMI 0x12D00000 -#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000 - -#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) -#define EXYNOS5_PA_IIC(x) (0x12C60000 + ((x) * 0x10000)) - -#define EXYNOS4_PA_ADC 0x13910000 -#define EXYNOS4_PA_ADC1 0x13911000 - -#define EXYNOS4_PA_AC97 0x139A0000 - -#define EXYNOS4_PA_SPDIF 0x139B0000 - #define EXYNOS4_PA_TIMER 0x139D0000 #define EXYNOS5_PA_TIMER 0x12DD0000 -#define EXYNOS4_PA_SDRAM 0x40000000 -#define EXYNOS5_PA_SDRAM 0x40000000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_HSMMC0 EXYNOS4_PA_HSMMC(0) -#define S3C_PA_HSMMC1 EXYNOS4_PA_HSMMC(1) -#define S3C_PA_HSMMC2 EXYNOS4_PA_HSMMC(2) -#define S3C_PA_HSMMC3 EXYNOS4_PA_HSMMC(3) -#define S3C_PA_IIC EXYNOS4_PA_IIC(0) -#define S3C_PA_IIC1 EXYNOS4_PA_IIC(1) -#define S3C_PA_IIC2 EXYNOS4_PA_IIC(2) -#define S3C_PA_IIC3 EXYNOS4_PA_IIC(3) -#define S3C_PA_IIC4 EXYNOS4_PA_IIC(4) -#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5) -#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6) -#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) -#define S3C_PA_RTC EXYNOS4_PA_RTC -#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG -#define S3C_PA_SPI0 EXYNOS4_PA_SPI0 -#define S3C_PA_SPI1 EXYNOS4_PA_SPI1 -#define S3C_PA_SPI2 EXYNOS4_PA_SPI2 -#define S3C_PA_USB_HSOTG EXYNOS4_PA_HSOTG - -#define S5P_PA_EHCI EXYNOS4_PA_EHCI -#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0 -#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1 -#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2 -#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3 -#define S5P_PA_JPEG EXYNOS4_PA_JPEG -#define S5P_PA_G2D EXYNOS4_PA_G2D -#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0 -#define S5P_PA_HDMI EXYNOS4_PA_HDMI -#define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY -#define S5P_PA_MFC EXYNOS4_PA_MFC -#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0 -#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1 -#define S5P_PA_MIXER EXYNOS4_PA_MIXER -#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND -#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA -#define S5P_PA_SDO EXYNOS4_PA_SDO -#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM -#define S5P_PA_VP EXYNOS4_PA_VP - -#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC -#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1 -#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD - /* Compatibility UART */ -#define EXYNOS4_PA_UART0 0x13800000 -#define EXYNOS4_PA_UART1 0x13810000 -#define EXYNOS4_PA_UART2 0x13820000 -#define EXYNOS4_PA_UART3 0x13830000 -#define EXYNOS4_SZ_UART SZ_256 - -#define EXYNOS5_PA_UART0 0x12C00000 -#define EXYNOS5_PA_UART1 0x12C10000 -#define EXYNOS5_PA_UART2 0x12C20000 -#define EXYNOS5_PA_UART3 0x12C30000 - #define EXYNOS5440_PA_UART0 0x000B0000 -#define EXYNOS5440_PA_UART1 0x000C0000 -#define EXYNOS5440_SZ_UART SZ_256 #define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index 296090e7f423..2b00833b6641 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -34,12 +34,7 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - u32 eintmask = s3c_irqwake_eintmask; - - if (of_have_populated_dt()) - eintmask = exynos_get_eint_wake_mask(); - - __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK); + __raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK); __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } @@ -69,4 +64,9 @@ static inline void samsung_pm_saved_gpios(void) /* nothing here yet */ } +/* Compatibility definitions to make plat-samsung/pm.c compile */ +#define IRQ_EINT_BIT(x) 1 +#define s3c_irqwake_intallow 0 +#define s3c_irqwake_eintallow 0 + #endif /* __ASM_ARCH_PM_CORE_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h deleted file mode 100644 index e4b5b60dcb85..000000000000 --- a/arch/arm/mach-exynos/include/mach/regs-gpio.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - GPIO (including EINT) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H __FILE__ - -#include <mach/map.h> -#include <mach/irqs.h> - -#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) -#define EINT_CON(b, x) (b + 0xE00 + (EINT_REG_NR(x) * 4)) -#define EINT_FLTCON(b, x) (b + 0xE80 + (EINT_REG_NR(x) * 4)) -#define EINT_MASK(b, x) (b + 0xF00 + (EINT_REG_NR(x) * 4)) -#define EINT_PEND(b, x) (b + 0xF40 + (EINT_REG_NR(x) * 4)) - -#define EINT_OFFSET_BIT(x) (1 << (EINT_OFFSET(x) & 0x7)) - -/* compatibility for plat-s5p/irq-pm.c */ -#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00) -#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4)) - -#define EXYNOS4_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) -#define S5P_EINT_FLTCON(x) (EXYNOS4_EINT40FLTCON0 + ((x) * 0x4)) - -#define EXYNOS4_EINT40MASK (S5P_VA_GPIO2 + 0xF00) -#define S5P_EINT_MASK(x) (EXYNOS4_EINT40MASK + ((x) * 0x4)) - -#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40) -#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4)) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h deleted file mode 100644 index 07277735252e..000000000000 --- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_S5P_REGS_USB_PHY_H -#define __PLAT_S5P_REGS_USB_PHY_H - -#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY) - -#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00) -#define PHY1_HSIC_NORMAL_MASK (0xf << 9) -#define PHY1_HSIC1_SLEEP (1 << 12) -#define PHY1_HSIC1_FORCE_SUSPEND (1 << 11) -#define PHY1_HSIC0_SLEEP (1 << 10) -#define PHY1_HSIC0_FORCE_SUSPEND (1 << 9) - -#define PHY1_STD_NORMAL_MASK (0x7 << 6) -#define PHY1_STD_SLEEP (1 << 8) -#define PHY1_STD_ANALOG_POWERDOWN (1 << 7) -#define PHY1_STD_FORCE_SUSPEND (1 << 6) - -#define PHY0_NORMAL_MASK (0x39 << 0) -#define PHY0_SLEEP (1 << 5) -#define PHY0_OTG_DISABLE (1 << 4) -#define PHY0_ANALOG_POWERDOWN (1 << 3) -#define PHY0_FORCE_SUSPEND (1 << 0) - -#define EXYNOS4_PHYCLK EXYNOS4_HSOTG_PHYREG(0x04) -#define PHY1_COMMON_ON_N (1 << 7) -#define PHY0_COMMON_ON_N (1 << 4) -#define PHY0_ID_PULLUP (1 << 2) - -#define EXYNOS4_CLKSEL_SHIFT (0) - -#define EXYNOS4210_CLKSEL_MASK (0x3 << 0) -#define EXYNOS4210_CLKSEL_48M (0x0 << 0) -#define EXYNOS4210_CLKSEL_12M (0x2 << 0) -#define EXYNOS4210_CLKSEL_24M (0x3 << 0) - -#define EXYNOS4X12_CLKSEL_MASK (0x7 << 0) -#define EXYNOS4X12_CLKSEL_9600K (0x0 << 0) -#define EXYNOS4X12_CLKSEL_10M (0x1 << 0) -#define EXYNOS4X12_CLKSEL_12M (0x2 << 0) -#define EXYNOS4X12_CLKSEL_19200K (0x3 << 0) -#define EXYNOS4X12_CLKSEL_20M (0x4 << 0) -#define EXYNOS4X12_CLKSEL_24M (0x5 << 0) - -#define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08) -#define HOST_LINK_PORT_SWRST_MASK (0xf << 6) -#define HOST_LINK_PORT2_SWRST (1 << 9) -#define HOST_LINK_PORT1_SWRST (1 << 8) -#define HOST_LINK_PORT0_SWRST (1 << 7) -#define HOST_LINK_ALL_SWRST (1 << 6) - -#define PHY1_SWRST_MASK (0x7 << 3) -#define PHY1_HSIC_SWRST (1 << 5) -#define PHY1_STD_SWRST (1 << 4) -#define PHY1_ALL_SWRST (1 << 3) - -#define PHY0_SWRST_MASK (0x7 << 0) -#define PHY0_PHYLINK_SWRST (1 << 2) -#define PHY0_HLINK_SWRST (1 << 1) -#define PHY0_SWRST (1 << 0) - -#define EXYNOS4_PHY1CON EXYNOS4_HSOTG_PHYREG(0x34) -#define FPENABLEN (1 << 0) - -#endif /* __PLAT_S5P_REGS_USB_PHY_H */ diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c deleted file mode 100644 index 5f0f55701374..000000000000 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ /dev/null @@ -1,207 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-armlex4210.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gpio.h> -#include <linux/io.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/smsc911x.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> -#include <plat/regs-srom.h> -#include <plat/sdhci.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = ARMLEX4210_UCON_DEFAULT, - .ulcon = ARMLEX4210_ULCON_DEFAULT, - .ufcon = ARMLEX4210_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = ARMLEX4210_UCON_DEFAULT, - .ulcon = ARMLEX4210_ULCON_DEFAULT, - .ufcon = ARMLEX4210_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = ARMLEX4210_UCON_DEFAULT, - .ulcon = ARMLEX4210_ULCON_DEFAULT, - .ufcon = ARMLEX4210_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = ARMLEX4210_UCON_DEFAULT, - .ulcon = ARMLEX4210_ULCON_DEFAULT, - .ufcon = ARMLEX4210_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_PERMANENT, -#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPX2(5), - .ext_cd_gpio_invert = 1, - .max_width = 4, -}; - -static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_PERMANENT, - .max_width = 4, -}; - -static void __init armlex4210_sdhci_init(void) -{ - s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata); - s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata); -} - -static void __init armlex4210_wlan_init(void) -{ - /* enable */ - s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP); - - /* reset */ - s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP); - - /* wakeup */ - s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP); -} - -static struct resource armlex4210_smsc911x_resources[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K), - [1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \ - | IRQF_TRIGGER_HIGH), -}; - -static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, - .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, -}; - -static struct platform_device armlex4210_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources), - .resource = armlex4210_smsc911x_resources, - .dev = { - .platform_data = &smsc9215_config, - }, -}; - -static struct platform_device *armlex4210_devices[] __initdata = { - &s3c_device_hsmmc0, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_rtc, - &s3c_device_wdt, - &armlex4210_smsc911x, - &exynos4_device_ahci, -}; - -static void __init armlex4210_smsc911x_init(void) -{ - u32 cs1; - - /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5P_SROM_BW) & - ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | - (0 << S5P_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5P_SROM_BW__ADDRMODE__SHIFT) | - (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << - S5P_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5P_SROM_BW); - - /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | - (0x9 << S5P_SROM_BCX__TACP__SHIFT) | - (0xc << S5P_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5P_SROM_BCX__TACC__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); -} - -static void __init armlex4210_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(armlex4210_uartcfgs, - ARRAY_SIZE(armlex4210_uartcfgs)); -} - -static void __init armlex4210_machine_init(void) -{ - armlex4210_smsc911x_init(); - - armlex4210_sdhci_init(); - - armlex4210_wlan_init(); - - platform_add_devices(armlex4210_devices, - ARRAY_SIZE(armlex4210_devices)); -} - -MACHINE_START(ARMLEX4210, "ARMLEX4210") - /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = armlex4210_map_io, - .init_machine = armlex4210_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index b9ed834a7eee..0099c6c13bba 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -23,11 +23,6 @@ #include "common.h" -static void __init exynos4_dt_map_io(void) -{ - exynos_init_io(NULL, 0); -} - static void __init exynos4_dt_machine_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -55,8 +50,7 @@ static void __init exynos4_reserve(void) DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = exynos4_dt_map_io, + .map_io = exynos_init_io, .init_early = exynos_firmware_init, .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 753b94f3fca7..d5c8afdeaa39 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -23,11 +23,6 @@ #include "common.h" -static void __init exynos5_dt_map_io(void) -{ - exynos_init_io(NULL, 0); -} - static void __init exynos5_dt_machine_init(void) { struct device_node *i2c_np; @@ -76,9 +71,8 @@ static void __init exynos5_reserve(void) DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .init_irq = exynos5_init_irq, .smp = smp_ops(exynos_smp_ops), - .map_io = exynos5_dt_map_io, + .map_io = exynos_init_io, .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, .init_time = exynos_init_time, diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c deleted file mode 100644 index 5c8b2878dbbd..000000000000 --- a/arch/arm/mach-exynos/mach-nuri.c +++ /dev/null @@ -1,1388 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/mach-nuri.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/i2c/atmel_mxt_ts.h> -#include <linux/i2c-gpio.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/power/max8903_charger.h> -#include <linux/power/max17042_battery.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/mfd/max8997.h> -#include <linux/mfd/max8997-private.h> -#include <linux/mmc/host.h> -#include <linux/fb.h> -#include <linux/pwm_backlight.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mipi-csis.h> -#include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/usb-ehci-s5p.h> -#include <drm/exynos_drm.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> -#include <media/m5mols.h> -#include <media/s5k6aa.h> -#include <media/s5p_fimc.h> -#include <media/v4l2-mediabus.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <plat/adc.h> -#include <plat/regs-serial.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/fb.h> -#include <plat/sdhci.h> -#include <plat/clock.h> -#include <plat/gpio-cfg.h> -#include <plat/mfc.h> -#include <plat/fimc-core.h> -#include <plat/camport.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG256 | \ - S5PV210_UFCON_RXTRIG256) - -enum fixed_regulator_id { - FIXED_REG_ID_MMC = 0, - FIXED_REG_ID_MAX8903, - FIXED_REG_ID_CAM_A28V, - FIXED_REG_ID_CAM_12V, - FIXED_REG_ID_CAM_VT_15V, -}; - -static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { - { - .hwport = 0, - .ucon = NURI_UCON_DEFAULT, - .ulcon = NURI_ULCON_DEFAULT, - .ufcon = NURI_UFCON_DEFAULT, - }, - { - .hwport = 1, - .ucon = NURI_UCON_DEFAULT, - .ulcon = NURI_ULCON_DEFAULT, - .ufcon = NURI_UFCON_DEFAULT, - }, - { - .hwport = 2, - .ucon = NURI_UCON_DEFAULT, - .ulcon = NURI_ULCON_DEFAULT, - .ufcon = NURI_UFCON_DEFAULT, - }, - { - .hwport = 3, - .ucon = NURI_UCON_DEFAULT, - .ulcon = NURI_ULCON_DEFAULT, - .ufcon = NURI_UFCON_DEFAULT, - }, -}; - -/* eMMC */ -static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { - .max_width = 8, - .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_ERASE), - .cd_type = S3C_SDHCI_CD_PERMANENT, -}; - -static struct regulator_consumer_supply emmc_supplies[] = { - REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"), - REGULATOR_SUPPLY("vmmc", "dw_mmc"), -}; - -static struct regulator_init_data emmc_fixed_voltage_init_data = { - .constraints = { - .name = "VMEM_VDD_2.8V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(emmc_supplies), - .consumer_supplies = emmc_supplies, -}; - -static struct fixed_voltage_config emmc_fixed_voltage_config = { - .supply_name = "MASSMEMORY_EN (inverted)", - .microvolts = 2800000, - .gpio = EXYNOS4_GPL1(1), - .enable_high = false, - .init_data = &emmc_fixed_voltage_init_data, -}; - -static struct platform_device emmc_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = FIXED_REG_ID_MMC, - .dev = { - .platform_data = &emmc_fixed_voltage_config, - }, -}; - -/* SD */ -static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */ - .ext_cd_gpio_invert = 1, - .cd_type = S3C_SDHCI_CD_GPIO, -}; - -/* WLAN */ -static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .cd_type = S3C_SDHCI_CD_EXTERNAL, -}; - -static void __init nuri_sdhci_init(void) -{ - s3c_sdhci0_set_platdata(&nuri_hsmmc0_data); - s3c_sdhci2_set_platdata(&nuri_hsmmc2_data); - s3c_sdhci3_set_platdata(&nuri_hsmmc3_data); -} - -/* GPIO KEYS */ -static struct gpio_keys_button nuri_gpio_keys_tables[] = { - { - .code = KEY_VOLUMEUP, - .gpio = EXYNOS4_GPX2(0), /* XEINT16 */ - .desc = "gpio-keys: KEY_VOLUMEUP", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_VOLUMEDOWN, - .gpio = EXYNOS4_GPX2(1), /* XEINT17 */ - .desc = "gpio-keys: KEY_VOLUMEDOWN", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_POWER, - .gpio = EXYNOS4_GPX2(7), /* XEINT23 */ - .desc = "gpio-keys: KEY_POWER", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data nuri_gpio_keys_data = { - .buttons = nuri_gpio_keys_tables, - .nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables), -}; - -static struct platform_device nuri_gpio_keys = { - .name = "gpio-keys", - .dev = { - .platform_data = &nuri_gpio_keys_data, - }, -}; - -#ifdef CONFIG_DRM_EXYNOS -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .xres = 1024, - .yres = 600, - .hsync_len = 40, - .left_margin = 79, - .right_margin = 200, - .vsync_len = 10, - .upper_margin = 10, - .lower_margin = 11, - .refresh = 60, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .default_win = 3, - .bpp = 32, -}; - -#else -/* Frame Buffer */ -static struct s3c_fb_pd_win nuri_fb_win0 = { - .max_bpp = 24, - .default_bpp = 16, - .xres = 1024, - .yres = 600, - .virtual_x = 1024, - .virtual_y = 2 * 600, -}; - -static struct fb_videomode nuri_lcd_timing = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 1, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, - .refresh = 60, -}; - -static struct s3c_fb_platdata nuri_fb_pdata __initdata = { - .win[0] = &nuri_fb_win0, - .vtiming = &nuri_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power) -{ - int gpio = EXYNOS4_GPE1(5); - - gpio_request(gpio, "LVDS_nSHDN"); - gpio_direction_output(gpio, power); - gpio_free(gpio); -} - -static int nuri_bl_init(struct device *dev) -{ - return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW, - "LCD_LD0_EN"); -} - -static int nuri_bl_notify(struct device *dev, int brightness) -{ - if (brightness < 1) - brightness = 0; - - gpio_set_value(EXYNOS4_GPE2(3), 1); - - return brightness; -} - -static void nuri_bl_exit(struct device *dev) -{ - gpio_free(EXYNOS4_GPE2(3)); -} - -/* nuri pwm backlight */ -static struct platform_pwm_backlight_data nuri_backlight_data = { - .pwm_id = 0, - .pwm_period_ns = 30000, - .max_brightness = 100, - .dft_brightness = 50, - .init = nuri_bl_init, - .notify = nuri_bl_notify, - .exit = nuri_bl_exit, -}; - -static struct platform_device nuri_backlight_device = { - .name = "pwm-backlight", - .id = -1, - .dev = { - .parent = &s3c_device_timer[0].dev, - .platform_data = &nuri_backlight_data, - }, -}; - -static struct plat_lcd_data nuri_lcd_platform_data = { - .set_power = nuri_lcd_power_on, -}; - -static struct platform_device nuri_lcd_device = { - .name = "platform-lcd", - .id = -1, - .dev = { - .platform_data = &nuri_lcd_platform_data, - }, -}; - -/* I2C1 */ -static struct i2c_board_info i2c1_devs[] __initdata = { - /* Gyro, To be updated */ -}; - -/* TSP */ -static struct mxt_platform_data mxt_platform_data = { - .x_line = 18, - .y_line = 11, - .x_size = 1024, - .y_size = 600, - .blen = 0x1, - .threshold = 0x28, - .voltage = 2800000, /* 2.8V */ - .orient = MXT_DIAGONAL_COUNTER, - .irqflags = IRQF_TRIGGER_FALLING, -}; - -static struct s3c2410_platform_i2c i2c3_data __initdata = { - .flags = 0, - .bus_num = 3, - .slave_addr = 0x10, - .frequency = 400 * 1000, - .sda_delay = 100, -}; - -static struct i2c_board_info i2c3_devs[] __initdata = { - { - I2C_BOARD_INFO("atmel_mxt_ts", 0x4a), - .platform_data = &mxt_platform_data, - .irq = IRQ_EINT(4), - }, -}; - -static void __init nuri_tsp_init(void) -{ - int gpio; - - /* TOUCH_INT: XEINT_4 */ - gpio = EXYNOS4_GPX0(4); - gpio_request(gpio, "TOUCH_INT"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); -} - -static struct regulator_consumer_supply __initdata max8997_ldo1_[] = { - REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo3_[] = { - REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */ - REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { - REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo5_[] = { - REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */ -}; -static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = { - REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { - REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo8_[] = { - REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */ - REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo11_[] = { - REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo12_[] = { - REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo13_[] = { - REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo14_[] = { - REGULATOR_SUPPLY("inmotor", "max8997-haptic"), -}; -static struct regulator_consumer_supply __initdata max8997_ldo15_[] = { - REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo16_[] = { - REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */ -}; -static struct regulator_consumer_supply __initdata max8997_ldo18_[] = { - REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */ -}; -static struct regulator_consumer_supply __initdata max8997_buck1_[] = { - REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ -}; -static struct regulator_consumer_supply __initdata max8997_buck2_[] = { - REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */ -}; -static struct regulator_consumer_supply __initdata max8997_buck3_[] = { - REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */ -}; -static struct regulator_consumer_supply __initdata max8997_buck4_[] = { - REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */ -}; -static struct regulator_consumer_supply __initdata max8997_buck6_[] = { - REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */ -}; -static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = { - REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */ -}; -static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = { - REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */ -}; - -static struct regulator_consumer_supply __initdata max8997_charger_[] = { - REGULATOR_SUPPLY("vinchg1", "charger-manager.0"), -}; -static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = { - REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */ -}; - -static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = { - REGULATOR_SUPPLY("gps_clk", "bcm4751"), - REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"), - REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"), -}; - -static struct regulator_init_data __initdata max8997_ldo1_data = { - .constraints = { - .name = "VADC_3.3V_C210", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_), - .consumer_supplies = max8997_ldo1_, -}; - -static struct regulator_init_data __initdata max8997_ldo2_data = { - .constraints = { - .name = "VALIVE_1.1V_C210", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo3_data = { - .constraints = { - .name = "VUSB_1.1V_C210", - .min_uV = 1100000, - .max_uV = 1100000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_), - .consumer_supplies = max8997_ldo3_, -}; - -static struct regulator_init_data __initdata max8997_ldo4_data = { - .constraints = { - .name = "VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_), - .consumer_supplies = max8997_ldo4_, -}; - -static struct regulator_init_data __initdata max8997_ldo5_data = { - .constraints = { - .name = "VHSIC_1.2V_C210", - .min_uV = 1200000, - .max_uV = 1200000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_), - .consumer_supplies = max8997_ldo5_, -}; - -static struct regulator_init_data __initdata max8997_ldo6_data = { - .constraints = { - .name = "VCC_1.8V_PDA", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer), - .consumer_supplies = nuri_max8997_ldo6_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo7_data = { - .constraints = { - .name = "CAM_ISP_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_), - .consumer_supplies = max8997_ldo7_, -}; - -static struct regulator_init_data __initdata max8997_ldo8_data = { - .constraints = { - .name = "VUSB+VDAC_3.3V_C210", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_), - .consumer_supplies = max8997_ldo8_, -}; - -static struct regulator_init_data __initdata max8997_ldo9_data = { - .constraints = { - .name = "VCC_2.8V_PDA", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo10_data = { - .constraints = { - .name = "VPLL_1.1V_C210", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo11_data = { - .constraints = { - .name = "LVDS_VDD3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .boot_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_), - .consumer_supplies = max8997_ldo11_, -}; - -static struct regulator_init_data __initdata max8997_ldo12_data = { - .constraints = { - .name = "VT_CAM_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_), - .consumer_supplies = max8997_ldo12_, -}; - -static struct regulator_init_data __initdata max8997_ldo13_data = { - .constraints = { - .name = "VTF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_), - .consumer_supplies = max8997_ldo13_, -}; - -static struct regulator_init_data __initdata max8997_ldo14_data = { - .constraints = { - .name = "VCC_3.0V_MOTOR", - .min_uV = 3000000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_), - .consumer_supplies = max8997_ldo14_, -}; - -static struct regulator_init_data __initdata max8997_ldo15_data = { - .constraints = { - .name = "VTOUCH_ADVV2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_), - .consumer_supplies = max8997_ldo15_, -}; - -static struct regulator_init_data __initdata max8997_ldo16_data = { - .constraints = { - .name = "CAM_SENSOR_IO_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_), - .consumer_supplies = max8997_ldo16_, -}; - -static struct regulator_init_data __initdata max8997_ldo18_data = { - .constraints = { - .name = "VTOUCH_VDD2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_), - .consumer_supplies = max8997_ldo18_, -}; - -static struct regulator_init_data __initdata max8997_ldo21_data = { - .constraints = { - .name = "VDDQ_M1M2_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_buck1_data = { - .constraints = { - .name = "VARM_1.2V_C210", - .min_uV = 900000, - .max_uV = 1350000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_), - .consumer_supplies = max8997_buck1_, -}; - -static struct regulator_init_data __initdata max8997_buck2_data = { - .constraints = { - .name = "VINT_1.1V_C210", - .min_uV = 900000, - .max_uV = 1200000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_), - .consumer_supplies = max8997_buck2_, -}; - -static struct regulator_init_data __initdata max8997_buck3_data = { - .constraints = { - .name = "VG3D_1.1V_C210", - .min_uV = 900000, - .max_uV = 1100000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_), - .consumer_supplies = max8997_buck3_, -}; - -static struct regulator_init_data __initdata max8997_buck4_data = { - .constraints = { - .name = "CAM_ISP_CORE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_), - .consumer_supplies = max8997_buck4_, -}; - -static struct regulator_init_data __initdata max8997_buck5_data = { - .constraints = { - .name = "VMEM_1.2V_C210", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_buck6_data = { - .constraints = { - .name = "CAM_AF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_), - .consumer_supplies = max8997_buck6_, -}; - -static struct regulator_init_data __initdata max8997_buck7_data = { - .constraints = { - .name = "VCC_SUB_2.0V", - .min_uV = 2000000, - .max_uV = 2000000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_32khz_ap_data = { - .constraints = { - .name = "32KHz AP", - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_), - .consumer_supplies = max8997_32khz_ap_, -}; - -static struct regulator_init_data __initdata max8997_32khz_cp_data = { - .constraints = { - .name = "32KHz CP", - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_vichg_data = { - .constraints = { - .name = "VICHG", - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_esafeout1_data = { - .constraints = { - .name = "SAFEOUT1", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_), - .consumer_supplies = max8997_esafeout1_, -}; - -static struct regulator_init_data __initdata max8997_esafeout2_data = { - .constraints = { - .name = "SAFEOUT2", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_), - .consumer_supplies = max8997_esafeout2_, -}; - -static struct regulator_init_data __initdata max8997_charger_cv_data = { - .constraints = { - .name = "CHARGER_CV", - .min_uV = 4200000, - .max_uV = 4200000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data __initdata max8997_charger_data = { - .constraints = { - .name = "CHARGER", - .min_uA = 200000, - .max_uA = 950000, - .boot_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_CURRENT, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_charger_), - .consumer_supplies = max8997_charger_, -}; - -static struct regulator_init_data __initdata max8997_charger_topoff_data = { - .constraints = { - .name = "CHARGER TOPOFF", - .min_uA = 50000, - .max_uA = 200000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, - }, - .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_), - .consumer_supplies = max8997_chg_toff_, -}; - -static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = { - { MAX8997_LDO1, &max8997_ldo1_data }, - { MAX8997_LDO2, &max8997_ldo2_data }, - { MAX8997_LDO3, &max8997_ldo3_data }, - { MAX8997_LDO4, &max8997_ldo4_data }, - { MAX8997_LDO5, &max8997_ldo5_data }, - { MAX8997_LDO6, &max8997_ldo6_data }, - { MAX8997_LDO7, &max8997_ldo7_data }, - { MAX8997_LDO8, &max8997_ldo8_data }, - { MAX8997_LDO9, &max8997_ldo9_data }, - { MAX8997_LDO10, &max8997_ldo10_data }, - { MAX8997_LDO11, &max8997_ldo11_data }, - { MAX8997_LDO12, &max8997_ldo12_data }, - { MAX8997_LDO13, &max8997_ldo13_data }, - { MAX8997_LDO14, &max8997_ldo14_data }, - { MAX8997_LDO15, &max8997_ldo15_data }, - { MAX8997_LDO16, &max8997_ldo16_data }, - - { MAX8997_LDO18, &max8997_ldo18_data }, - { MAX8997_LDO21, &max8997_ldo21_data }, - - { MAX8997_BUCK1, &max8997_buck1_data }, - { MAX8997_BUCK2, &max8997_buck2_data }, - { MAX8997_BUCK3, &max8997_buck3_data }, - { MAX8997_BUCK4, &max8997_buck4_data }, - { MAX8997_BUCK5, &max8997_buck5_data }, - { MAX8997_BUCK6, &max8997_buck6_data }, - { MAX8997_BUCK7, &max8997_buck7_data }, - - { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data }, - { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data }, - - { MAX8997_ENVICHG, &max8997_vichg_data }, - { MAX8997_ESAFEOUT1, &max8997_esafeout1_data }, - { MAX8997_ESAFEOUT2, &max8997_esafeout2_data }, - { MAX8997_CHARGER_CV, &max8997_charger_cv_data }, - { MAX8997_CHARGER, &max8997_charger_data }, - { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data }, -}; - -static struct max8997_platform_data __initdata nuri_max8997_pdata = { - .wakeup = 1, - - .num_regulators = ARRAY_SIZE(nuri_max8997_regulators), - .regulators = nuri_max8997_regulators, - - .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) }, - - .buck1_voltage[0] = 1350000, /* 1.35V */ - .buck1_voltage[1] = 1300000, /* 1.3V */ - .buck1_voltage[2] = 1250000, /* 1.25V */ - .buck1_voltage[3] = 1200000, /* 1.2V */ - .buck1_voltage[4] = 1150000, /* 1.15V */ - .buck1_voltage[5] = 1100000, /* 1.1V */ - .buck1_voltage[6] = 1000000, /* 1.0V */ - .buck1_voltage[7] = 950000, /* 0.95V */ - - .buck2_voltage[0] = 1100000, /* 1.1V */ - .buck2_voltage[1] = 1000000, /* 1.0V */ - .buck2_voltage[2] = 950000, /* 0.95V */ - .buck2_voltage[3] = 900000, /* 0.9V */ - .buck2_voltage[4] = 1100000, /* 1.1V */ - .buck2_voltage[5] = 1000000, /* 1.0V */ - .buck2_voltage[6] = 950000, /* 0.95V */ - .buck2_voltage[7] = 900000, /* 0.9V */ - - .buck5_voltage[0] = 1200000, /* 1.2V */ - .buck5_voltage[1] = 1200000, /* 1.2V */ - .buck5_voltage[2] = 1200000, /* 1.2V */ - .buck5_voltage[3] = 1200000, /* 1.2V */ - .buck5_voltage[4] = 1200000, /* 1.2V */ - .buck5_voltage[5] = 1200000, /* 1.2V */ - .buck5_voltage[6] = 1200000, /* 1.2V */ - .buck5_voltage[7] = 1200000, /* 1.2V */ -}; - -/* GPIO I2C 5 (PMIC) */ -enum { I2C5_MAX8997 }; -static struct i2c_board_info i2c5_devs[] __initdata = { - [I2C5_MAX8997] = { - I2C_BOARD_INFO("max8997", 0xCC >> 1), - .platform_data = &nuri_max8997_pdata, - }, -}; - -static struct max17042_platform_data nuri_battery_platform_data = { -}; - -/* GPIO I2C 9 (Fuel Gauge) */ -static struct i2c_gpio_platform_data i2c9_gpio_data = { - .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */ - .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */ -}; -static struct platform_device i2c9_gpio = { - .name = "i2c-gpio", - .id = 9, - .dev = { - .platform_data = &i2c9_gpio_data, - }, -}; -enum { I2C9_MAX17042}; -static struct i2c_board_info i2c9_devs[] __initdata = { - [I2C9_MAX17042] = { - I2C_BOARD_INFO("max17042", 0x36), - .platform_data = &nuri_battery_platform_data, - }, -}; - -/* MAX8903 Secondary Charger */ -static struct regulator_consumer_supply supplies_max8903[] = { - REGULATOR_SUPPLY("vinchg2", "charger-manager.0"), -}; - -static struct regulator_init_data max8903_charger_en_data = { - .constraints = { - .name = "VOUT_CHARGER", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(supplies_max8903), - .consumer_supplies = supplies_max8903, -}; - -static struct fixed_voltage_config max8903_charger_en = { - .supply_name = "VOUT_CHARGER", - .microvolts = 5000000, /* Assume 5VDC */ - .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */ - .enable_high = 0, /* Enable = Low */ - .enabled_at_boot = 1, - .init_data = &max8903_charger_en_data, -}; - -static struct platform_device max8903_fixed_reg_dev = { - .name = "reg-fixed-voltage", - .id = FIXED_REG_ID_MAX8903, - .dev = { .platform_data = &max8903_charger_en }, -}; - -static struct max8903_pdata nuri_max8903 = { - /* - * cen: don't control with the driver, let it be - * controlled by regulator above - */ - .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */ - /* uok, usus: not connected */ - .chg = EXYNOS4_GPE2(0), /* TA_nCHG */ - /* flt: vcc_1.8V_pda */ - .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */ - - .dc_valid = true, - .usb_valid = false, /* USB is not wired to MAX8903 */ -}; - -static struct platform_device nuri_max8903_device = { - .name = "max8903-charger", - .dev = { - .platform_data = &nuri_max8903, - }, -}; - -static void __init nuri_power_init(void) -{ - int gpio; - int ta_en = 0; - - gpio = EXYNOS4_GPX0(7); - gpio_request(gpio, "AP_PMIC_IRQ"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - - gpio = EXYNOS4_GPX2(3); - gpio_request(gpio, "FUEL_ALERT"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - - gpio = nuri_max8903.dok; - gpio_request(gpio, "TA_nCONNECTED"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - ta_en = gpio_get_value(gpio) ? 0 : 1; - - gpio = nuri_max8903.chg; - gpio_request(gpio, "TA_nCHG"); - gpio_direction_input(gpio); - - gpio = nuri_max8903.dcm; - gpio_request(gpio, "CURR_ADJ"); - gpio_direction_output(gpio, ta_en); -} - -/* USB EHCI */ -static struct s5p_ehci_platdata nuri_ehci_pdata; - -static void __init nuri_ehci_init(void) -{ - struct s5p_ehci_platdata *pdata = &nuri_ehci_pdata; - - s5p_ehci_set_platdata(pdata); -} - -/* USB OTG */ -static struct s3c_hsotg_plat nuri_hsotg_pdata; - -/* CAMERA */ -static struct regulator_consumer_supply cam_vt_cam15_supply = - REGULATOR_SUPPLY("vdd_core", "6-003c"); - -static struct regulator_init_data cam_vt_cam15_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = 1, - .consumer_supplies = &cam_vt_cam15_supply, -}; - -static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = { - .supply_name = "VT_CAM_1.5V", - .microvolts = 1500000, - .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */ - .enable_high = 1, - .init_data = &cam_vt_cam15_reg_init_data, -}; - -static struct platform_device cam_vt_cam15_fixed_rdev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V, - .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg }, -}; - -static struct regulator_consumer_supply cam_vdda_supply[] = { - REGULATOR_SUPPLY("vdda", "6-003c"), - REGULATOR_SUPPLY("a_sensor", "0-001f"), -}; - -static struct regulator_init_data cam_vdda_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply), - .consumer_supplies = cam_vdda_supply, -}; - -static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = { - .supply_name = "CAM_IO_EN", - .microvolts = 2800000, - .gpio = EXYNOS4_GPE2(1), /* CAM_IO_EN */ - .enable_high = 1, - .init_data = &cam_vdda_reg_init_data, -}; - -static struct platform_device cam_vdda_fixed_rdev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V, - .dev = { .platform_data = &cam_vdda_fixed_voltage_cfg }, -}; - -static struct regulator_consumer_supply camera_8m_12v_supply = - REGULATOR_SUPPLY("dig_12", "0-001f"); - -static struct regulator_init_data cam_8m_12v_reg_init_data = { - .num_consumer_supplies = 1, - .consumer_supplies = &camera_8m_12v_supply, - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS - }, -}; - -static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = { - .supply_name = "8M_1.2V", - .microvolts = 1200000, - .gpio = EXYNOS4_GPE2(5), /* 8M_1.2V_EN */ - .enable_high = 1, - .init_data = &cam_8m_12v_reg_init_data, -}; - -static struct platform_device cam_8m_12v_fixed_rdev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V, - .dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg }, -}; - -static struct s5p_platform_mipi_csis mipi_csis_platdata = { - .clk_rate = 166000000UL, - .lanes = 2, - .hs_settle = 12, -}; - -#define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */ -#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5) -#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0) -#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1) - -static struct s5k6aa_platform_data s5k6aa_pldata = { - .mclk_frequency = 24000000UL, - .gpio_reset = { GPIO_CAM_VT_NRST, 0 }, - .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 }, - .bus_type = V4L2_MBUS_PARALLEL, - .horiz_flip = 1, -}; - -static struct i2c_board_info s5k6aa_board_info = { - I2C_BOARD_INFO("S5K6AA", 0x3c), - .platform_data = &s5k6aa_pldata, -}; - -static struct m5mols_platform_data m5mols_platdata = { - .gpio_reset = GPIO_CAM_MEGA_RST, -}; - -static struct i2c_board_info m5mols_board_info = { - I2C_BOARD_INFO("M5MOLS", 0x1F), - .platform_data = &m5mols_platdata, -}; - -static struct fimc_source_info nuri_camera_sensors[] = { - { - .flags = V4L2_MBUS_PCLK_SAMPLE_RISING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, - .board_info = &s5k6aa_board_info, - .clk_frequency = 24000000UL, - .i2c_bus_num = 6, - }, { - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2, - .board_info = &m5mols_board_info, - .clk_frequency = 24000000UL, - }, -}; - -static struct s5p_platform_fimc fimc_md_platdata = { - .source_info = nuri_camera_sensors, - .num_clients = ARRAY_SIZE(nuri_camera_sensors), -}; - -static struct gpio nuri_camera_gpios[] = { - { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, - { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, - { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, - { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, -}; - -static void __init nuri_camera_init(void) -{ - s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), - &s5p_device_mipi_csis0); - s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata), - &s5p_device_fimc_md); - - if (gpio_request_array(nuri_camera_gpios, - ARRAY_SIZE(nuri_camera_gpios))) { - pr_err("%s: GPIO request failed\n", __func__); - return; - } - - m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT); - if (m5mols_board_info.irq >= 0) - s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF)); - else - pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__); - - /* Free GPIOs controlled directly by the sensor drivers. */ - gpio_free(GPIO_CAM_VT_NRST); - gpio_free(GPIO_CAM_VT_NSTBY); - gpio_free(GPIO_CAM_MEGA_RST); - - if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) { - pr_err("%s: Camera port A setup failed\n", __func__); - return; - } - /* Increase drive strength of the sensor clock output */ - s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4); -} - -static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = { - .frequency = 400000U, - .sda_delay = 200, - .bus_num = 6, -}; - -static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = { - .frequency = 400000U, - .sda_delay = 200, -}; - -/* DEVFREQ controlling memory/bus */ -static struct platform_device exynos4_bus_devfreq = { - .name = "exynos4210-busfreq", -}; - -static struct platform_device *nuri_devices[] __initdata = { - /* Samsung Platform Devices */ - &s3c_device_i2c5, /* PMIC should initialize first */ - &s3c_device_i2c0, - &s3c_device_i2c6, - &emmc_fixed_voltage, - &s5p_device_mipi_csis0, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_fimd0, - &s3c_device_hsmmc0, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_wdt, - &s3c_device_timer[0], - &s5p_device_ehci, - &s3c_device_i2c3, - &i2c9_gpio, - &s3c_device_adc, - &s5p_device_g2d, - &s5p_device_jpeg, - &s3c_device_rtc, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &s5p_device_fimc_md, - &s3c_device_usb_hsotg, - - /* NURI Devices */ - &nuri_gpio_keys, - &nuri_lcd_device, - &nuri_backlight_device, - &max8903_fixed_reg_dev, - &nuri_max8903_device, - &cam_vt_cam15_fixed_rdev, - &cam_vdda_fixed_rdev, - &cam_8m_12v_fixed_rdev, - &exynos4_bus_devfreq, -}; - -static void __init nuri_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); - xxti_f = 0; - xusbxti_f = 24000000; -} - -static void __init nuri_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init nuri_machine_init(void) -{ - nuri_sdhci_init(); - nuri_tsp_init(); - nuri_power_init(); - - s3c_i2c0_set_platdata(&nuri_i2c0_platdata); - i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); - s3c_i2c3_set_platdata(&i2c3_data); - i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); - s3c_i2c5_set_platdata(NULL); - i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7)); - i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); - i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); - i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); - s3c_i2c6_set_platdata(&nuri_i2c6_platdata); - -#ifdef CONFIG_DRM_EXYNOS - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&nuri_fb_pdata); -#endif - - nuri_camera_init(); - - nuri_ehci_init(); - s3c_hsotg_set_platdata(&nuri_hsotg_pdata); - - /* Last */ - platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); -} - -MACHINE_START(NURI, "NURI") - /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = nuri_map_io, - .init_machine = nuri_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .reserve = &nuri_reserve, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c deleted file mode 100644 index 27f03ed5d067..000000000000 --- a/arch/arm/mach-exynos/mach-origen.c +++ /dev/null @@ -1,823 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-origen.c - * - * Copyright (c) 2011 Insignal Co., Ltd. - * http://www.insignal.co.kr/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/serial_core.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/gpio_keys.h> -#include <linux/i2c.h> -#include <linux/regulator/machine.h> -#include <linux/mfd/max8997.h> -#include <linux/lcd.h> -#include <linux/rfkill-gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-ohci-exynos.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> - -#include <plat/regs-serial.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/sdhci.h> -#include <plat/clock.h> -#include <plat/gpio-cfg.h> -#include <plat/backlight.h> -#include <plat/fb.h> -#include <plat/mfc.h> -#include <plat/hdmi.h> - -#include <mach/map.h> -#include <mach/irqs.h> - -#include <drm/exynos_drm.h> -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = ORIGEN_UCON_DEFAULT, - .ulcon = ORIGEN_ULCON_DEFAULT, - .ufcon = ORIGEN_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = ORIGEN_UCON_DEFAULT, - .ulcon = ORIGEN_ULCON_DEFAULT, - .ufcon = ORIGEN_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = ORIGEN_UCON_DEFAULT, - .ulcon = ORIGEN_ULCON_DEFAULT, - .ufcon = ORIGEN_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = ORIGEN_UCON_DEFAULT, - .ulcon = ORIGEN_ULCON_DEFAULT, - .ufcon = ORIGEN_UFCON_DEFAULT, - }, -}; - -static struct regulator_consumer_supply __initdata ldo3_consumer[] = { - REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */ - REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */ - REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */ - REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */ -}; -static struct regulator_consumer_supply __initdata ldo6_consumer[] = { - REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */ -}; -static struct regulator_consumer_supply __initdata ldo7_consumer[] = { - REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */ -}; -static struct regulator_consumer_supply __initdata ldo8_consumer[] = { - REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ - REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */ - REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */ -}; -static struct regulator_consumer_supply __initdata ldo9_consumer[] = { - REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ -}; -static struct regulator_consumer_supply __initdata ldo11_consumer[] = { - REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */ -}; -static struct regulator_consumer_supply __initdata ldo14_consumer[] = { - REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ -}; -static struct regulator_consumer_supply __initdata ldo17_consumer[] = { - REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ -}; -static struct regulator_consumer_supply __initdata buck1_consumer[] = { - REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ -}; -static struct regulator_consumer_supply __initdata buck2_consumer[] = { - REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ -}; -static struct regulator_consumer_supply __initdata buck3_consumer[] = { - REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */ -}; -static struct regulator_consumer_supply __initdata buck7_consumer[] = { - REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */ -}; - -static struct regulator_init_data __initdata max8997_ldo1_data = { - .constraints = { - .name = "VDD_ABB_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo2_data = { - .constraints = { - .name = "VDD_ALIVE_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo3_data = { - .constraints = { - .name = "VMIPI_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer), - .consumer_supplies = ldo3_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo4_data = { - .constraints = { - .name = "VDD_RTC_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo6_data = { - .constraints = { - .name = "VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer), - .consumer_supplies = ldo6_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo7_data = { - .constraints = { - .name = "VDD_AUD_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer), - .consumer_supplies = ldo7_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo8_data = { - .constraints = { - .name = "VADC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer), - .consumer_supplies = ldo8_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo9_data = { - .constraints = { - .name = "DVDD_SWB_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer), - .consumer_supplies = ldo9_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo10_data = { - .constraints = { - .name = "VDD_PLL_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_ldo11_data = { - .constraints = { - .name = "VDD_AUD_3V", - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer), - .consumer_supplies = ldo11_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo14_data = { - .constraints = { - .name = "AVDD18_SWB_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer), - .consumer_supplies = ldo14_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo17_data = { - .constraints = { - .name = "VDD_SWB_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer), - .consumer_supplies = ldo17_consumer, -}; - -static struct regulator_init_data __initdata max8997_ldo21_data = { - .constraints = { - .name = "VDD_MIF_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_buck1_data = { - .constraints = { - .name = "VDD_ARM_1.2V", - .min_uV = 950000, - .max_uV = 1350000, - .always_on = 1, - .boot_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), - .consumer_supplies = buck1_consumer, -}; - -static struct regulator_init_data __initdata max8997_buck2_data = { - .constraints = { - .name = "VDD_INT_1.1V", - .min_uV = 900000, - .max_uV = 1100000, - .always_on = 1, - .boot_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), - .consumer_supplies = buck2_consumer, -}; - -static struct regulator_init_data __initdata max8997_buck3_data = { - .constraints = { - .name = "VDD_G3D_1.1V", - .min_uV = 900000, - .max_uV = 1100000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(buck3_consumer), - .consumer_supplies = buck3_consumer, -}; - -static struct regulator_init_data __initdata max8997_buck5_data = { - .constraints = { - .name = "VDDQ_M1M2_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data __initdata max8997_buck7_data = { - .constraints = { - .name = "VDD_LCD_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .boot_on = 1, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1 - }, - }, - .num_consumer_supplies = ARRAY_SIZE(buck7_consumer), - .consumer_supplies = buck7_consumer, -}; - -static struct max8997_regulator_data __initdata origen_max8997_regulators[] = { - { MAX8997_LDO1, &max8997_ldo1_data }, - { MAX8997_LDO2, &max8997_ldo2_data }, - { MAX8997_LDO3, &max8997_ldo3_data }, - { MAX8997_LDO4, &max8997_ldo4_data }, - { MAX8997_LDO6, &max8997_ldo6_data }, - { MAX8997_LDO7, &max8997_ldo7_data }, - { MAX8997_LDO8, &max8997_ldo8_data }, - { MAX8997_LDO9, &max8997_ldo9_data }, - { MAX8997_LDO10, &max8997_ldo10_data }, - { MAX8997_LDO11, &max8997_ldo11_data }, - { MAX8997_LDO14, &max8997_ldo14_data }, - { MAX8997_LDO17, &max8997_ldo17_data }, - { MAX8997_LDO21, &max8997_ldo21_data }, - { MAX8997_BUCK1, &max8997_buck1_data }, - { MAX8997_BUCK2, &max8997_buck2_data }, - { MAX8997_BUCK3, &max8997_buck3_data }, - { MAX8997_BUCK5, &max8997_buck5_data }, - { MAX8997_BUCK7, &max8997_buck7_data }, -}; - -static struct max8997_platform_data __initdata origen_max8997_pdata = { - .num_regulators = ARRAY_SIZE(origen_max8997_regulators), - .regulators = origen_max8997_regulators, - - .wakeup = true, - .buck1_gpiodvs = false, - .buck2_gpiodvs = false, - .buck5_gpiodvs = false, - - .ignore_gpiodvs_side_effect = true, - .buck125_default_idx = 0x0, - - .buck125_gpios[0] = EXYNOS4_GPX0(0), - .buck125_gpios[1] = EXYNOS4_GPX0(1), - .buck125_gpios[2] = EXYNOS4_GPX0(2), - - .buck1_voltage[0] = 1350000, - .buck1_voltage[1] = 1300000, - .buck1_voltage[2] = 1250000, - .buck1_voltage[3] = 1200000, - .buck1_voltage[4] = 1150000, - .buck1_voltage[5] = 1100000, - .buck1_voltage[6] = 1000000, - .buck1_voltage[7] = 950000, - - .buck2_voltage[0] = 1100000, - .buck2_voltage[1] = 1100000, - .buck2_voltage[2] = 1100000, - .buck2_voltage[3] = 1100000, - .buck2_voltage[4] = 1000000, - .buck2_voltage[5] = 1000000, - .buck2_voltage[6] = 1000000, - .buck2_voltage[7] = 1000000, - - .buck5_voltage[0] = 1200000, - .buck5_voltage[1] = 1200000, - .buck5_voltage[2] = 1200000, - .buck5_voltage[3] = 1200000, - .buck5_voltage[4] = 1200000, - .buck5_voltage[5] = 1200000, - .buck5_voltage[6] = 1200000, - .buck5_voltage[7] = 1200000, -}; - -/* I2C0 */ -static struct i2c_board_info i2c0_devs[] __initdata = { - { - I2C_BOARD_INFO("max8997", (0xCC >> 1)), - .platform_data = &origen_max8997_pdata, - .irq = IRQ_EINT(4), - }, -}; - -static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -}; - -static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -}; - -/* USB EHCI */ -static struct s5p_ehci_platdata origen_ehci_pdata; - -static void __init origen_ehci_init(void) -{ - struct s5p_ehci_platdata *pdata = &origen_ehci_pdata; - - s5p_ehci_set_platdata(pdata); -} - -/* USB OHCI */ -static struct exynos4_ohci_platdata origen_ohci_pdata; - -static void __init origen_ohci_init(void) -{ - struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata; - - exynos4_ohci_set_platdata(pdata); -} - -/* USB OTG */ -static struct s3c_hsotg_plat origen_hsotg_pdata; - -static struct gpio_led origen_gpio_leds[] = { - { - .name = "origen::status1", - .default_trigger = "heartbeat", - .gpio = EXYNOS4_GPX1(3), - .active_low = 1, - }, - { - .name = "origen::status2", - .default_trigger = "mmc0", - .gpio = EXYNOS4_GPX1(4), - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data origen_gpio_led_info = { - .leds = origen_gpio_leds, - .num_leds = ARRAY_SIZE(origen_gpio_leds), -}; - -static struct platform_device origen_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &origen_gpio_led_info, - }, -}; - -static struct gpio_keys_button origen_gpio_keys_table[] = { - { - .code = KEY_MENU, - .gpio = EXYNOS4_GPX1(5), - .desc = "gpio-keys: KEY_MENU", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, { - .code = KEY_HOME, - .gpio = EXYNOS4_GPX1(6), - .desc = "gpio-keys: KEY_HOME", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, { - .code = KEY_BACK, - .gpio = EXYNOS4_GPX1(7), - .desc = "gpio-keys: KEY_BACK", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, { - .code = KEY_UP, - .gpio = EXYNOS4_GPX2(0), - .desc = "gpio-keys: KEY_UP", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, { - .code = KEY_DOWN, - .gpio = EXYNOS4_GPX2(1), - .desc = "gpio-keys: KEY_DOWN", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data origen_gpio_keys_data = { - .buttons = origen_gpio_keys_table, - .nbuttons = ARRAY_SIZE(origen_gpio_keys_table), -}; - -static struct platform_device origen_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &origen_gpio_keys_data, - }, -}; - -static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power) -{ - int ret; - - if (power) - ret = gpio_request_one(EXYNOS4_GPE3(4), - GPIOF_OUT_INIT_HIGH, "GPE3_4"); - else - ret = gpio_request_one(EXYNOS4_GPE3(4), - GPIOF_OUT_INIT_LOW, "GPE3_4"); - - gpio_free(EXYNOS4_GPE3(4)); - - if (ret) - pr_err("failed to request gpio for LCD power: %d\n", ret); -} - -static struct plat_lcd_data origen_lcd_hv070wsa_data = { - .set_power = lcd_hv070wsa_set_power, -}; - -static struct platform_device origen_lcd_hv070wsa = { - .name = "platform-lcd", - .dev.parent = &s5p_device_fimd0.dev, - .dev.platform_data = &origen_lcd_hv070wsa_data, -}; - -static struct pwm_lookup origen_pwm_lookup[] = { - PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL), -}; - -#ifdef CONFIG_DRM_EXYNOS_FIMD -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 16, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | - VIDCON1_INV_VCLK, - .default_win = 0, - .bpp = 32, -}; -#else -static struct s3c_fb_pd_win origen_fb_win0 = { - .xres = 1024, - .yres = 600, - .max_bpp = 32, - .default_bpp = 24, - .virtual_x = 1024, - .virtual_y = 2 * 600, -}; - -static struct fb_videomode origen_lcd_timing = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 16, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, -}; - -static struct s3c_fb_platdata origen_lcd_pdata __initdata = { - .win[0] = &origen_fb_win0, - .vtiming = &origen_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | - VIDCON1_INV_VCLK, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -/* Bluetooth rfkill gpio platform data */ -static struct rfkill_gpio_platform_data origen_bt_pdata = { - .reset_gpio = EXYNOS4_GPX2(2), - .shutdown_gpio = -1, - .type = RFKILL_TYPE_BLUETOOTH, - .name = "origen-bt", -}; - -/* Bluetooth Platform device */ -static struct platform_device origen_device_bluetooth = { - .name = "rfkill_gpio", - .id = -1, - .dev = { - .platform_data = &origen_bt_pdata, - }, -}; - -static struct platform_device *origen_devices[] __initdata = { - &s3c_device_hsmmc2, - &s3c_device_hsmmc0, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_usb_hsotg, - &s3c_device_wdt, - &s5p_device_ehci, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_fimc_md, - &s5p_device_fimd0, - &s5p_device_g2d, - &s5p_device_hdmi, - &s5p_device_i2c_hdmiphy, - &s5p_device_jpeg, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &s5p_device_mixer, - &exynos4_device_ohci, - &origen_device_gpiokeys, - &origen_lcd_hv070wsa, - &origen_leds_gpio, - &origen_device_bluetooth, -}; - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info origen_bl_gpio_info = { - .no = EXYNOS4_GPD0(0), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data origen_bl_data = { - .pwm_id = 0, - .pwm_period_ns = 1000, -}; - -static void __init origen_bt_setup(void) -{ - gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART"); - /* 4 UART Pins configuration */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2)); - /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */ - s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT); - s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); -} - -/* I2C module and id for HDMIPHY */ -static struct i2c_board_info hdmiphy_info = { - I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), -}; - -static void s5p_tv_setup(void) -{ - /* Direct HPD to HDMI chip */ - gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); - s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); - s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); -} - -static void __init origen_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); - xxti_f = 0; - xusbxti_f = 24000000; -} - -static void __init origen_power_init(void) -{ - gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ"); - s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE); -} - -static void __init origen_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init origen_machine_init(void) -{ - origen_power_init(); - - s3c_i2c0_set_platdata(NULL); - i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); - - /* - * Since sdhci instance 2 can contain a bootable media, - * sdhci instance 0 is registered after instance 2. - */ - s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata); - s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata); - - origen_ehci_init(); - origen_ohci_init(); - s3c_hsotg_set_platdata(&origen_hsotg_pdata); - - s5p_tv_setup(); - s5p_i2c_hdmiphy_set_platdata(NULL); - s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); - -#ifdef CONFIG_DRM_EXYNOS_FIMD - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&origen_lcd_pdata); -#endif - - platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); - - pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup)); - samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); - - origen_bt_setup(); -} - -MACHINE_START(ORIGEN, "ORIGEN") - /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = origen_map_io, - .init_machine = origen_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .reserve = &origen_reserve, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c deleted file mode 100644 index 2c8af9617920..000000000000 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/mach-smdk4x12.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/lcd.h> -#include <linux/mfd/max8997.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/regulator/machine.h> -#include <linux/serial_core.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/s3c-hsotg.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/samsung_fimd.h> -#include <plat/backlight.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/fb.h> -#include <plat/gpio-cfg.h> -#include <plat/keypad.h> -#include <plat/mfc.h> -#include <plat/regs-serial.h> -#include <plat/sdhci.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <drm/exynos_drm.h> -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK4X12_UCON_DEFAULT, - .ulcon = SMDK4X12_ULCON_DEFAULT, - .ufcon = SMDK4X12_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK4X12_UCON_DEFAULT, - .ulcon = SMDK4X12_ULCON_DEFAULT, - .ufcon = SMDK4X12_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK4X12_UCON_DEFAULT, - .ulcon = SMDK4X12_ULCON_DEFAULT, - .ufcon = SMDK4X12_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK4X12_UCON_DEFAULT, - .ulcon = SMDK4X12_ULCON_DEFAULT, - .ufcon = SMDK4X12_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -}; - -static struct regulator_consumer_supply max8997_buck1 = - REGULATOR_SUPPLY("vdd_arm", NULL); - -static struct regulator_consumer_supply max8997_buck2 = - REGULATOR_SUPPLY("vdd_int", NULL); - -static struct regulator_consumer_supply max8997_buck3 = - REGULATOR_SUPPLY("vdd_g3d", NULL); - -static struct regulator_init_data max8997_buck1_data = { - .constraints = { - .name = "VDD_ARM_SMDK4X12", - .min_uV = 925000, - .max_uV = 1350000, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8997_buck1, -}; - -static struct regulator_init_data max8997_buck2_data = { - .constraints = { - .name = "VDD_INT_SMDK4X12", - .min_uV = 950000, - .max_uV = 1150000, - .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8997_buck2, -}; - -static struct regulator_init_data max8997_buck3_data = { - .constraints = { - .name = "VDD_G3D_SMDK4X12", - .min_uV = 950000, - .max_uV = 1150000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8997_buck3, -}; - -static struct max8997_regulator_data smdk4x12_max8997_regulators[] = { - { MAX8997_BUCK1, &max8997_buck1_data }, - { MAX8997_BUCK2, &max8997_buck2_data }, - { MAX8997_BUCK3, &max8997_buck3_data }, -}; - -static struct max8997_platform_data smdk4x12_max8997_pdata = { - .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators), - .regulators = smdk4x12_max8997_regulators, - - .buck1_voltage[0] = 1100000, /* 1.1V */ - .buck1_voltage[1] = 1100000, /* 1.1V */ - .buck1_voltage[2] = 1100000, /* 1.1V */ - .buck1_voltage[3] = 1100000, /* 1.1V */ - .buck1_voltage[4] = 1100000, /* 1.1V */ - .buck1_voltage[5] = 1100000, /* 1.1V */ - .buck1_voltage[6] = 1000000, /* 1.0V */ - .buck1_voltage[7] = 950000, /* 0.95V */ - - .buck2_voltage[0] = 1100000, /* 1.1V */ - .buck2_voltage[1] = 1000000, /* 1.0V */ - .buck2_voltage[2] = 950000, /* 0.95V */ - .buck2_voltage[3] = 900000, /* 0.9V */ - .buck2_voltage[4] = 1100000, /* 1.1V */ - .buck2_voltage[5] = 1000000, /* 1.0V */ - .buck2_voltage[6] = 950000, /* 0.95V */ - .buck2_voltage[7] = 900000, /* 0.9V */ - - .buck5_voltage[0] = 1100000, /* 1.1V */ - .buck5_voltage[1] = 1100000, /* 1.1V */ - .buck5_voltage[2] = 1100000, /* 1.1V */ - .buck5_voltage[3] = 1100000, /* 1.1V */ - .buck5_voltage[4] = 1100000, /* 1.1V */ - .buck5_voltage[5] = 1100000, /* 1.1V */ - .buck5_voltage[6] = 1100000, /* 1.1V */ - .buck5_voltage[7] = 1100000, /* 1.1V */ -}; - -static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = { - { - I2C_BOARD_INFO("max8997", 0x66), - .platform_data = &smdk4x12_max8997_pdata, - } -}; - -static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = { - { I2C_BOARD_INFO("wm8994", 0x1a), } -}; - -static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = { - /* nothing here yet */ -}; - -static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = { - /* nothing here yet */ -}; - -static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = { - .no = EXYNOS4_GPD0(1), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdk4x12_bl_data = { - .pwm_id = 1, - .pwm_period_ns = 1000, -}; - -static struct pwm_lookup smdk4x12_pwm_lookup[] = { - PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL), -}; - -static uint32_t smdk4x12_keymap[] __initdata = { - /* KEY(row, col, keycode) */ - KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3), - KEY(1, 6, KEY_4), KEY(1, 7, KEY_5), - KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B), - KEY(0, 7, KEY_E), KEY(0, 5, KEY_C) -}; - -static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { - .keymap = smdk4x12_keymap, - .keymap_size = ARRAY_SIZE(smdk4x12_keymap), -}; - -static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = { - .keymap_data = &smdk4x12_keymap_data, - .rows = 3, - .cols = 8, -}; - -#ifdef CONFIG_DRM_EXYNOS_FIMD -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .left_margin = 8, - .right_margin = 8, - .upper_margin = 6, - .lower_margin = 6, - .hsync_len = 6, - .vsync_len = 4, - .xres = 480, - .yres = 800, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .default_win = 0, - .bpp = 32, -}; -#else -static struct s3c_fb_pd_win smdk4x12_fb_win0 = { - .xres = 480, - .yres = 800, - .virtual_x = 480, - .virtual_y = 800 * 2, - .max_bpp = 32, - .default_bpp = 24, -}; - -static struct fb_videomode smdk4x12_lcd_timing = { - .left_margin = 8, - .right_margin = 8, - .upper_margin = 6, - .lower_margin = 6, - .hsync_len = 6, - .vsync_len = 4, - .xres = 480, - .yres = 800, -}; - -static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = { - .win[0] = &smdk4x12_fb_win0, - .vtiming = &smdk4x12_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -/* USB OTG */ -static struct s3c_hsotg_plat smdk4x12_hsotg_pdata; - -static struct platform_device *smdk4x12_devices[] __initdata = { - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_i2c3, - &s3c_device_i2c7, - &s3c_device_rtc, - &s3c_device_usb_hsotg, - &s3c_device_wdt, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_fimc_md, - &s5p_device_fimd0, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &samsung_device_keypad, -}; - -static void __init smdk4x12_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); -} - -static void __init smdk4x12_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init smdk4x12_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - i2c_register_board_info(0, smdk4x12_i2c_devs0, - ARRAY_SIZE(smdk4x12_i2c_devs0)); - - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, smdk4x12_i2c_devs1, - ARRAY_SIZE(smdk4x12_i2c_devs1)); - - s3c_i2c3_set_platdata(NULL); - i2c_register_board_info(3, smdk4x12_i2c_devs3, - ARRAY_SIZE(smdk4x12_i2c_devs3)); - - s3c_i2c7_set_platdata(NULL); - i2c_register_board_info(7, smdk4x12_i2c_devs7, - ARRAY_SIZE(smdk4x12_i2c_devs7)); - - samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data); - pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup)); - - samsung_keypad_set_platdata(&smdk4x12_keypad_data); - - s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata); - - s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata); - -#ifdef CONFIG_DRM_EXYNOS_FIMD - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata); -#endif - - platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices)); -} - -MACHINE_START(SMDK4212, "SMDK4212") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = smdk4x12_map_io, - .init_machine = smdk4x12_machine_init, - .init_time = exynos_init_time, - .restart = exynos4_restart, - .reserve = &smdk4x12_reserve, -MACHINE_END - -MACHINE_START(SMDK4412, "SMDK4412") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = smdk4x12_map_io, - .init_machine = smdk4x12_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .restart = exynos4_restart, - .reserve = &smdk4x12_reserve, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c deleted file mode 100644 index d95b8cf85253..000000000000 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ /dev/null @@ -1,444 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-smdkv310.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/serial_core.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/lcd.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/smsc911x.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/input.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-ohci-exynos.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> -#include <plat/regs-serial.h> -#include <plat/regs-srom.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/fb.h> -#include <plat/keypad.h> -#include <plat/sdhci.h> -#include <plat/gpio-cfg.h> -#include <plat/backlight.h> -#include <plat/mfc.h> -#include <plat/clock.h> -#include <plat/hdmi.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <drm/exynos_drm.h> -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, -}; - -static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - /* fire nRESET on power up */ - gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0"); - mdelay(100); - - gpio_set_value(EXYNOS4_GPX0(6), 0); - mdelay(10); - - gpio_set_value(EXYNOS4_GPX0(6), 1); - mdelay(10); - - gpio_free(EXYNOS4_GPX0(6)); - } else { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - } -} - -static struct plat_lcd_data smdkv310_lcd_lte480wv_data = { - .set_power = lcd_lte480wv_set_power, -}; - -static struct platform_device smdkv310_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s5p_device_fimd0.dev, - .dev.platform_data = &smdkv310_lcd_lte480wv_data, -}; - -#ifdef CONFIG_DRM_EXYNOS_FIMD -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .default_win = 0, - .bpp = 32, -}; -#else -static struct s3c_fb_pd_win smdkv310_fb_win0 = { - .max_bpp = 32, - .default_bpp = 24, - .xres = 800, - .yres = 480, -}; - -static struct fb_videomode smdkv310_lcd_timing = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, -}; - -static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = { - .win[0] = &smdkv310_fb_win0, - .vtiming = &smdkv310_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -static struct resource smdkv310_smsc911x_resources[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K), - [1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \ - | IRQF_TRIGGER_LOW), -}; - -static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, - .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, -}; - -static struct platform_device smdkv310_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources), - .resource = smdkv310_smsc911x_resources, - .dev = { - .platform_data = &smsc9215_config, - }, -}; - -static uint32_t smdkv310_keymap[] __initdata = { - /* KEY(row, col, keycode) */ - KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), - KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), - KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), - KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) -}; - -static struct matrix_keymap_data smdkv310_keymap_data __initdata = { - .keymap = smdkv310_keymap, - .keymap_size = ARRAY_SIZE(smdkv310_keymap), -}; - -static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = { - .keymap_data = &smdkv310_keymap_data, - .rows = 2, - .cols = 8, -}; - -static struct i2c_board_info i2c_devs1[] __initdata = { - {I2C_BOARD_INFO("wm8994", 0x1a),}, -}; - -/* USB EHCI */ -static struct s5p_ehci_platdata smdkv310_ehci_pdata; - -static void __init smdkv310_ehci_init(void) -{ - struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata; - - s5p_ehci_set_platdata(pdata); -} - -/* USB OHCI */ -static struct exynos4_ohci_platdata smdkv310_ohci_pdata; - -static void __init smdkv310_ohci_init(void) -{ - struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata; - - exynos4_ohci_set_platdata(pdata); -} - -/* USB OTG */ -static struct s3c_hsotg_plat smdkv310_hsotg_pdata; - -/* Audio device */ -static struct platform_device smdkv310_device_audio = { - .name = "smdk-audio", - .id = -1, -}; - -static struct platform_device *smdkv310_devices[] __initdata = { - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c1, - &s5p_device_i2c_hdmiphy, - &s3c_device_rtc, - &s3c_device_usb_hsotg, - &s3c_device_wdt, - &s5p_device_ehci, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_fimc_md, - &s5p_device_g2d, - &s5p_device_jpeg, - &exynos4_device_ac97, - &exynos4_device_i2s0, - &exynos4_device_ohci, - &samsung_device_keypad, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &exynos4_device_spdif, - &samsung_asoc_idma, - &s5p_device_fimd0, - &smdkv310_device_audio, - &smdkv310_lcd_lte480wv, - &smdkv310_smsc911x, - &exynos4_device_ahci, - &s5p_device_hdmi, - &s5p_device_mixer, -}; - -static void __init smdkv310_smsc911x_init(void) -{ - u32 cs1; - - /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5P_SROM_BW) & - ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << - S5P_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5P_SROM_BW); - - /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | - (0x9 << S5P_SROM_BCX__TACP__SHIFT) | - (0xc << S5P_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5P_SROM_BCX__TACC__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); -} - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = { - .no = EXYNOS4_GPD0(1), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdkv310_bl_data = { - .pwm_id = 1, - .pwm_period_ns = 1000, -}; - -/* I2C module and id for HDMIPHY */ -static struct i2c_board_info hdmiphy_info = { - I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), -}; - -static struct pwm_lookup smdkv310_pwm_lookup[] = { - PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL), -}; - -static void s5p_tv_setup(void) -{ - /* direct HPD to HDMI chip */ - WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug")); - s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); - s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); -} - -static void __init smdkv310_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); - xxti_f = 12000000; - xusbxti_f = 24000000; -} - -static void __init smdkv310_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init smdkv310_machine_init(void) -{ - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); - - smdkv310_smsc911x_init(); - - s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata); - - s5p_tv_setup(); - s5p_i2c_hdmiphy_set_platdata(NULL); - s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); - - samsung_keypad_set_platdata(&smdkv310_keypad_data); - - samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); - pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup)); - -#ifdef CONFIG_DRM_EXYNOS_FIMD - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); -#endif - - smdkv310_ehci_init(); - smdkv310_ohci_init(); - s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata); - - platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); -} - -MACHINE_START(SMDKV310, "SMDKV310") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = smdkv310_map_io, - .init_machine = smdkv310_machine_init, - .init_time = exynos_init_time, - .reserve = &smdkv310_reserve, - .restart = exynos4_restart, -MACHINE_END - -MACHINE_START(SMDKC210, "SMDKC210") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = smdkv310_map_io, - .init_machine = smdkv310_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .reserve = &smdkv310_reserve, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c deleted file mode 100644 index 74ddb2b55614..000000000000 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ /dev/null @@ -1,1159 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-universal_c210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/fb.h> -#include <linux/mfd/max8998.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/max8952.h> -#include <linux/mmc/host.h> -#include <linux/i2c-gpio.h> -#include <linux/i2c/mcs.h> -#include <linux/i2c/atmel_mxt_ts.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/mipi-csis.h> -#include <linux/platform_data/s3c-hsotg.h> -#include <drm/exynos_drm.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/samsung_fimd.h> -#include <plat/regs-serial.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/gpio-cfg.h> -#include <plat/fb.h> -#include <plat/mfc.h> -#include <plat/sdhci.h> -#include <plat/fimc-core.h> -#include <plat/camport.h> - -#include <mach/map.h> - -#include <media/v4l2-mediabus.h> -#include <media/s5p_fimc.h> -#include <media/m5mols.h> -#include <media/s5k6aa.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG256 | \ - S5PV210_UFCON_RXTRIG256) - -static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, -}; - -static struct regulator_consumer_supply max8952_consumer = - REGULATOR_SUPPLY("vdd_arm", NULL); - -static struct regulator_init_data universal_max8952_reg_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 770000, - .max_uV = 1400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8952_consumer, -}; - -static struct max8952_platform_data universal_max8952_pdata __initdata = { - .gpio_vid0 = EXYNOS4_GPX0(3), - .gpio_vid1 = EXYNOS4_GPX0(4), - .gpio_en = -1, /* Not controllable, set "Always High" */ - .default_mode = 0, /* vid0 = 0, vid1 = 0 */ - .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */ - .sync_freq = 0, /* default: fastest */ - .ramp_speed = 0, /* default: fastest */ - .reg_data = &universal_max8952_reg_data, -}; - -static struct regulator_consumer_supply lp3974_buck1_consumer = - REGULATOR_SUPPLY("vdd_int", NULL); - -static struct regulator_consumer_supply lp3974_buck2_consumer = - REGULATOR_SUPPLY("vddg3d", NULL); - -static struct regulator_consumer_supply lp3974_buck3_consumer[] = { - REGULATOR_SUPPLY("vdet", "s5p-sdo"), - REGULATOR_SUPPLY("vdd_reg", "0-003c"), -}; - -static struct regulator_init_data lp3974_buck1_data = { - .constraints = { - .name = "VINT_1.1V", - .min_uV = 750000, - .max_uV = 1500000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_buck1_consumer, -}; - -static struct regulator_init_data lp3974_buck2_data = { - .constraints = { - .name = "VG3D_1.1V", - .min_uV = 750000, - .max_uV = 1500000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_buck2_consumer, -}; - -static struct regulator_init_data lp3974_buck3_data = { - .constraints = { - .name = "VCC_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer), - .consumer_supplies = lp3974_buck3_consumer, -}; - -static struct regulator_init_data lp3974_buck4_data = { - .constraints = { - .name = "VMEM_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_ldo2_data = { - .constraints = { - .name = "VALIVE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_consumer_supply lp3974_ldo3_consumer[] = { - REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), - REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), - REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), - REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), -}; - -static struct regulator_init_data lp3974_ldo3_data = { - .constraints = { - .name = "VUSB+MIPI_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer), - .consumer_supplies = lp3974_ldo3_consumer, -}; - -static struct regulator_consumer_supply lp3974_ldo4_consumer[] = { - REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), -}; - -static struct regulator_init_data lp3974_ldo4_data = { - .constraints = { - .name = "VADC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer), - .consumer_supplies = lp3974_ldo4_consumer, -}; - -static struct regulator_init_data lp3974_ldo5_data = { - .constraints = { - .name = "VTF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_ldo6_data = { - .constraints = { - .name = "LDO6", - .min_uV = 2000000, - .max_uV = 2000000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_consumer_supply lp3974_ldo7_consumer[] = { - REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), -}; - -static struct regulator_init_data lp3974_ldo7_data = { - .constraints = { - .name = "VLCD+VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer), - .consumer_supplies = lp3974_ldo7_consumer, -}; - -static struct regulator_consumer_supply lp3974_ldo8_consumer[] = { - REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), - REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), -}; - -static struct regulator_init_data lp3974_ldo8_data = { - .constraints = { - .name = "VUSB+VDAC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer), - .consumer_supplies = lp3974_ldo8_consumer, -}; - -static struct regulator_consumer_supply lp3974_ldo9_consumer = - REGULATOR_SUPPLY("vddio", "0-003c"); - -static struct regulator_init_data lp3974_ldo9_data = { - .constraints = { - .name = "VCC_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_ldo9_consumer, -}; - -static struct regulator_init_data lp3974_ldo10_data = { - .constraints = { - .name = "VPLL_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .boot_on = 1, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_consumer_supply lp3974_ldo11_consumer = - REGULATOR_SUPPLY("dig_28", "0-001f"); - -static struct regulator_init_data lp3974_ldo11_data = { - .constraints = { - .name = "CAM_AF_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_ldo11_consumer, -}; - -static struct regulator_init_data lp3974_ldo12_data = { - .constraints = { - .name = "PS_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_ldo13_data = { - .constraints = { - .name = "VHIC_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_consumer_supply lp3974_ldo14_consumer = - REGULATOR_SUPPLY("dig_18", "0-001f"); - -static struct regulator_init_data lp3974_ldo14_data = { - .constraints = { - .name = "CAM_I_HOST_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_ldo14_consumer, -}; - - -static struct regulator_consumer_supply lp3974_ldo15_consumer = - REGULATOR_SUPPLY("dig_12", "0-001f"); - -static struct regulator_init_data lp3974_ldo15_data = { - .constraints = { - .name = "CAM_S_DIG+FM33_CORE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_ldo15_consumer, -}; - -static struct regulator_consumer_supply lp3974_ldo16_consumer[] = { - REGULATOR_SUPPLY("vdda", "0-003c"), - REGULATOR_SUPPLY("a_sensor", "0-001f"), -}; - -static struct regulator_init_data lp3974_ldo16_data = { - .constraints = { - .name = "CAM_S_ANA_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .disabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer), - .consumer_supplies = lp3974_ldo16_consumer, -}; - -static struct regulator_init_data lp3974_ldo17_data = { - .constraints = { - .name = "VCC_3.0V_LCD", - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_32khz_ap_data = { - .constraints = { - .name = "32KHz AP", - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_32khz_cp_data = { - .constraints = { - .name = "32KHz CP", - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_vichg_data = { - .constraints = { - .name = "VICHG", - .state_mem = { - .disabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_esafeout1_data = { - .constraints = { - .name = "SAFEOUT1", - .min_uV = 4800000, - .max_uV = 4800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data lp3974_esafeout2_data = { - .constraints = { - .name = "SAFEOUT2", - .boot_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct max8998_regulator_data lp3974_regulators[] = { - { MAX8998_LDO2, &lp3974_ldo2_data }, - { MAX8998_LDO3, &lp3974_ldo3_data }, - { MAX8998_LDO4, &lp3974_ldo4_data }, - { MAX8998_LDO5, &lp3974_ldo5_data }, - { MAX8998_LDO6, &lp3974_ldo6_data }, - { MAX8998_LDO7, &lp3974_ldo7_data }, - { MAX8998_LDO8, &lp3974_ldo8_data }, - { MAX8998_LDO9, &lp3974_ldo9_data }, - { MAX8998_LDO10, &lp3974_ldo10_data }, - { MAX8998_LDO11, &lp3974_ldo11_data }, - { MAX8998_LDO12, &lp3974_ldo12_data }, - { MAX8998_LDO13, &lp3974_ldo13_data }, - { MAX8998_LDO14, &lp3974_ldo14_data }, - { MAX8998_LDO15, &lp3974_ldo15_data }, - { MAX8998_LDO16, &lp3974_ldo16_data }, - { MAX8998_LDO17, &lp3974_ldo17_data }, - { MAX8998_BUCK1, &lp3974_buck1_data }, - { MAX8998_BUCK2, &lp3974_buck2_data }, - { MAX8998_BUCK3, &lp3974_buck3_data }, - { MAX8998_BUCK4, &lp3974_buck4_data }, - { MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data }, - { MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data }, - { MAX8998_ENVICHG, &lp3974_vichg_data }, - { MAX8998_ESAFEOUT1, &lp3974_esafeout1_data }, - { MAX8998_ESAFEOUT2, &lp3974_esafeout2_data }, -}; - -static struct max8998_platform_data universal_lp3974_pdata = { - .num_regulators = ARRAY_SIZE(lp3974_regulators), - .regulators = lp3974_regulators, - .buck1_voltage1 = 1100000, /* INT */ - .buck1_voltage2 = 1000000, - .buck1_voltage3 = 1100000, - .buck1_voltage4 = 1000000, - .buck1_set1 = EXYNOS4_GPX0(5), - .buck1_set2 = EXYNOS4_GPX0(6), - .buck2_voltage1 = 1200000, /* G3D */ - .buck2_voltage2 = 1100000, - .buck1_default_idx = 0, - .buck2_set3 = EXYNOS4_GPE2(0), - .buck2_default_idx = 0, - .wakeup = true, -}; - - -enum fixed_regulator_id { - FIXED_REG_ID_MMC0, - FIXED_REG_ID_HDMI_5V, - FIXED_REG_ID_CAM_S_IF, - FIXED_REG_ID_CAM_I_CORE, - FIXED_REG_ID_CAM_VT_DIO, -}; - -static struct regulator_consumer_supply hdmi_fixed_consumer = - REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi"); - -static struct regulator_init_data hdmi_fixed_voltage_init_data = { - .constraints = { - .name = "HDMI_5V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &hdmi_fixed_consumer, -}; - -static struct fixed_voltage_config hdmi_fixed_voltage_config = { - .supply_name = "HDMI_EN1", - .microvolts = 5000000, - .gpio = EXYNOS4_GPE0(1), - .enable_high = true, - .init_data = &hdmi_fixed_voltage_init_data, -}; - -static struct platform_device hdmi_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = FIXED_REG_ID_HDMI_5V, - .dev = { - .platform_data = &hdmi_fixed_voltage_config, - }, -}; - -/* GPIO I2C 5 (PMIC) */ -static struct i2c_board_info i2c5_devs[] __initdata = { - { - I2C_BOARD_INFO("max8952", 0xC0 >> 1), - .platform_data = &universal_max8952_pdata, - }, { - I2C_BOARD_INFO("lp3974", 0xCC >> 1), - .platform_data = &universal_lp3974_pdata, - }, -}; - -/* I2C3 (TSP) */ -static struct mxt_platform_data qt602240_platform_data = { - .x_line = 19, - .y_line = 11, - .x_size = 800, - .y_size = 480, - .blen = 0x11, - .threshold = 0x28, - .voltage = 2800000, /* 2.8V */ - .orient = MXT_DIAGONAL, - .irqflags = IRQF_TRIGGER_FALLING, -}; - -static struct i2c_board_info i2c3_devs[] __initdata = { - { - I2C_BOARD_INFO("qt602240_ts", 0x4a), - .platform_data = &qt602240_platform_data, - }, -}; - -static void __init universal_tsp_init(void) -{ - int gpio; - - /* TSP_LDO_ON: XMDMADDR_11 */ - gpio = EXYNOS4_GPE2(3); - gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON"); - gpio_export(gpio, 0); - - /* TSP_INT: XMDMADDR_7 */ - gpio = EXYNOS4_GPE1(7); - gpio_request(gpio, "TSP_INT"); - - s5p_register_gpio_interrupt(gpio); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - i2c3_devs[0].irq = gpio_to_irq(gpio); -} - - -/* GPIO I2C 12 (3 Touchkey) */ -static uint32_t touchkey_keymap[] = { - /* MCS_KEY_MAP(value, keycode) */ - MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */ - MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */ -}; - -static struct mcs_platform_data touchkey_data = { - .keymap = touchkey_keymap, - .keymap_size = ARRAY_SIZE(touchkey_keymap), - .key_maxval = 2, -}; - -/* GPIO I2C 3_TOUCH 2.8V */ -#define I2C_GPIO_BUS_12 12 -static struct i2c_gpio_platform_data i2c_gpio12_data = { - .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */ - .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */ -}; - -static struct platform_device i2c_gpio12 = { - .name = "i2c-gpio", - .id = I2C_GPIO_BUS_12, - .dev = { - .platform_data = &i2c_gpio12_data, - }, -}; - -static struct i2c_board_info i2c_gpio12_devs[] __initdata = { - { - I2C_BOARD_INFO("mcs5080_touchkey", 0x20), - .platform_data = &touchkey_data, - }, -}; - -static void __init universal_touchkey_init(void) -{ - int gpio; - - gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */ - gpio_request(gpio, "3_TOUCH_INT"); - s5p_register_gpio_interrupt(gpio); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - i2c_gpio12_devs[0].irq = gpio_to_irq(gpio); - - gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */ - gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN"); -} - -static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = { - .frequency = 300 * 1000, - .sda_delay = 200, -}; - -/* GPIO KEYS */ -static struct gpio_keys_button universal_gpio_keys_tables[] = { - { - .code = KEY_VOLUMEUP, - .gpio = EXYNOS4_GPX2(0), /* XEINT16 */ - .desc = "gpio-keys: KEY_VOLUMEUP", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_VOLUMEDOWN, - .gpio = EXYNOS4_GPX2(1), /* XEINT17 */ - .desc = "gpio-keys: KEY_VOLUMEDOWN", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CONFIG, - .gpio = EXYNOS4_GPX2(2), /* XEINT18 */ - .desc = "gpio-keys: KEY_CONFIG", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CAMERA, - .gpio = EXYNOS4_GPX2(3), /* XEINT19 */ - .desc = "gpio-keys: KEY_CAMERA", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_OK, - .gpio = EXYNOS4_GPX3(5), /* XEINT29 */ - .desc = "gpio-keys: KEY_OK", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data universal_gpio_keys_data = { - .buttons = universal_gpio_keys_tables, - .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), -}; - -static struct platform_device universal_gpio_keys = { - .name = "gpio-keys", - .dev = { - .platform_data = &universal_gpio_keys_data, - }, -}; - -/* eMMC */ -static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { - .max_width = 8, - .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .cd_type = S3C_SDHCI_CD_PERMANENT, -}; - -static struct regulator_consumer_supply mmc0_supplies[] = { - REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"), -}; - -static struct regulator_init_data mmc0_fixed_voltage_init_data = { - .constraints = { - .name = "VMEM_VDD_2.8V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies), - .consumer_supplies = mmc0_supplies, -}; - -static struct fixed_voltage_config mmc0_fixed_voltage_config = { - .supply_name = "MASSMEMORY_EN", - .microvolts = 2800000, - .gpio = EXYNOS4_GPE1(3), - .enable_high = true, - .init_data = &mmc0_fixed_voltage_init_data, -}; - -static struct platform_device mmc0_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = FIXED_REG_ID_MMC0, - .dev = { - .platform_data = &mmc0_fixed_voltage_config, - }, -}; - -/* SD */ -static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ - .ext_cd_gpio_invert = 1, - .cd_type = S3C_SDHCI_CD_GPIO, -}; - -/* WiFi */ -static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .cd_type = S3C_SDHCI_CD_EXTERNAL, -}; - -static void __init universal_sdhci_init(void) -{ - s3c_sdhci0_set_platdata(&universal_hsmmc0_data); - s3c_sdhci2_set_platdata(&universal_hsmmc2_data); - s3c_sdhci3_set_platdata(&universal_hsmmc3_data); -} - -/* I2C1 */ -static struct i2c_board_info i2c1_devs[] __initdata = { - /* Gyro, To be updated */ -}; - -#ifdef CONFIG_DRM_EXYNOS -static struct exynos_drm_fimd_pdata drm_fimd_pdata = { - .panel = { - .timing = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, - }, - }, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN - | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .default_win = 3, - .bpp = 32, -}; -#else -/* Frame Buffer */ -static struct s3c_fb_pd_win universal_fb_win0 = { - .max_bpp = 32, - .default_bpp = 16, - .xres = 480, - .yres = 800, - .virtual_x = 480, - .virtual_y = 2 * 800, -}; - -static struct fb_videomode universal_lcd_timing = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, -}; - -static struct s3c_fb_platdata universal_lcd_pdata __initdata = { - .win[0] = &universal_fb_win0, - .vtiming = &universal_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN - | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; -#endif - -static struct regulator_consumer_supply cam_vt_dio_supply = - REGULATOR_SUPPLY("vdd_core", "0-003c"); - -static struct regulator_init_data cam_vt_dio_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = 1, - .consumer_supplies = &cam_vt_dio_supply, -}; - -static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = { - .supply_name = "CAM_VT_D_IO", - .microvolts = 2800000, - .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */ - .enable_high = 1, - .init_data = &cam_vt_dio_reg_init_data, -}; - -static struct platform_device cam_vt_dio_fixed_reg_dev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO, - .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg }, -}; - -static struct regulator_consumer_supply cam_i_core_supply = - REGULATOR_SUPPLY("core", "0-001f"); - -static struct regulator_init_data cam_i_core_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = 1, - .consumer_supplies = &cam_i_core_supply, -}; - -static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = { - .supply_name = "CAM_I_CORE_1.2V", - .microvolts = 1200000, - .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */ - .enable_high = 1, - .init_data = &cam_i_core_reg_init_data, -}; - -static struct platform_device cam_i_core_fixed_reg_dev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE, - .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg }, -}; - -static struct regulator_consumer_supply cam_s_if_supply = - REGULATOR_SUPPLY("d_sensor", "0-001f"); - -static struct regulator_init_data cam_s_if_reg_init_data = { - .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, - .num_consumer_supplies = 1, - .consumer_supplies = &cam_s_if_supply, -}; - -static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = { - .supply_name = "CAM_S_IF_1.8V", - .microvolts = 1800000, - .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */ - .enable_high = 1, - .init_data = &cam_s_if_reg_init_data, -}; - -static struct platform_device cam_s_if_fixed_reg_dev = { - .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF, - .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg }, -}; - -static struct s5p_platform_mipi_csis mipi_csis_platdata = { - .clk_rate = 166000000UL, - .lanes = 2, - .hs_settle = 12, -}; - -#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3) -#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */ -#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5) -#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7) -#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6) - -static int s5k6aa_set_power(int on) -{ - gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on); - return 0; -} - -static struct s5k6aa_platform_data s5k6aa_platdata = { - .mclk_frequency = 21600000UL, - .gpio_reset = { GPIO_CAM_VGA_NRST, 0 }, - .gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 }, - .bus_type = V4L2_MBUS_PARALLEL, - .horiz_flip = 1, - .set_power = s5k6aa_set_power, -}; - -static struct i2c_board_info s5k6aa_board_info = { - I2C_BOARD_INFO("S5K6AA", 0x3C), - .platform_data = &s5k6aa_platdata, -}; - -static int m5mols_set_power(struct device *dev, int on) -{ - gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on); - gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on); - return 0; -} - -static struct m5mols_platform_data m5mols_platdata = { - .gpio_reset = GPIO_CAM_MEGA_nRST, - .reset_polarity = 0, - .set_power = m5mols_set_power, -}; - -static struct i2c_board_info m5mols_board_info = { - I2C_BOARD_INFO("M5MOLS", 0x1F), - .platform_data = &m5mols_platdata, -}; - -static struct fimc_source_info universal_camera_sensors[] = { - { - .mux_id = 0, - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, - .board_info = &s5k6aa_board_info, - .i2c_bus_num = 0, - .clk_frequency = 24000000UL, - }, { - .mux_id = 0, - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2, - .board_info = &m5mols_board_info, - .i2c_bus_num = 0, - .clk_frequency = 24000000UL, - }, -}; - -static struct s5p_platform_fimc fimc_md_platdata = { - .source_info = universal_camera_sensors, - .num_clients = ARRAY_SIZE(universal_camera_sensors), -}; - -static struct gpio universal_camera_gpios[] = { - { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" }, - { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" }, - { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, - { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, - { GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, - { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, -}; - -/* USB OTG */ -static struct s3c_hsotg_plat universal_hsotg_pdata; - -static void __init universal_camera_init(void) -{ - s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), - &s5p_device_mipi_csis0); - s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata), - &s5p_device_fimc_md); - - if (gpio_request_array(universal_camera_gpios, - ARRAY_SIZE(universal_camera_gpios))) { - pr_err("%s: GPIO request failed\n", __func__); - return; - } - - if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf))) - m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT); - else - pr_err("Failed to configure 8M_ISP_INT GPIO\n"); - - /* Free GPIOs controlled directly by the sensor drivers. */ - gpio_free(GPIO_CAM_MEGA_nRST); - gpio_free(GPIO_CAM_8M_ISP_INT); - gpio_free(GPIO_CAM_VGA_NRST); - gpio_free(GPIO_CAM_VGA_NSTBY); - - if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) - pr_err("Camera port A setup failed\n"); -} - -static struct platform_device *universal_devices[] __initdata = { - /* Samsung Platform Devices */ - &s5p_device_mipi_csis0, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc3, - &s5p_device_g2d, - &mmc0_fixed_voltage, - &s3c_device_hsmmc0, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c0, - &s3c_device_i2c3, - &s3c_device_i2c5, - &s5p_device_i2c_hdmiphy, - &hdmi_fixed_voltage, - &s5p_device_hdmi, - &s5p_device_sdo, - &s5p_device_mixer, - - /* Universal Devices */ - &i2c_gpio12, - &universal_gpio_keys, - &s5p_device_onenand, - &s5p_device_fimd0, - &s5p_device_jpeg, - &s3c_device_usb_hsotg, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &cam_vt_dio_fixed_reg_dev, - &cam_i_core_fixed_reg_dev, - &cam_s_if_fixed_reg_dev, - &s5p_device_fimc_md, -}; - -static void __init universal_map_io(void) -{ - exynos_init_io(NULL, 0); - s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - exynos_set_timer_source(BIT(2) | BIT(4)); - xxti_f = 0; - xusbxti_f = 24000000; -} - -static void s5p_tv_setup(void) -{ - /* direct HPD to HDMI chip */ - gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); - s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); - s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); -} - -static void __init universal_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init universal_machine_init(void) -{ - universal_sdhci_init(); - s5p_tv_setup(); - - s3c_i2c0_set_platdata(&universal_i2c0_platdata); - i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); - - universal_tsp_init(); - s3c_i2c3_set_platdata(NULL); - i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); - - s3c_i2c5_set_platdata(NULL); - s5p_i2c_hdmiphy_set_platdata(NULL); - i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); - -#ifdef CONFIG_DRM_EXYNOS - s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; - exynos4_fimd0_gpio_setup_24bpp(); -#else - s5p_fimd0_set_platdata(&universal_lcd_pdata); -#endif - - universal_touchkey_init(); - i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, - ARRAY_SIZE(i2c_gpio12_devs)); - - s3c_hsotg_set_platdata(&universal_hsotg_pdata); - universal_camera_init(); - - /* Last */ - platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); -} - -MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") - /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .smp = smp_ops(exynos_smp_ops), - .init_irq = exynos4_init_irq, - .map_io = universal_map_io, - .init_machine = universal_machine_init, - .init_late = exynos_init_late, - .init_time = exynos_init_time, - .reserve = &universal_reserve, - .restart = exynos4_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index e3faaa812016..41c20692a13f 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -30,7 +30,6 @@ #include <plat/regs-srom.h> #include <mach/regs-irq.h> -#include <mach/regs-gpio.h> #include <mach/regs-clock.h> #include <mach/regs-pmu.h> #include <mach/pm-core.h> diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 9f1351de52f7..1703593e366c 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -74,17 +74,6 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain) return exynos_pd_power(domain, false); } -#define EXYNOS_GPD(PD, BASE, NAME) \ -static struct exynos_pm_domain PD = { \ - .base = (void __iomem *)BASE, \ - .name = NAME, \ - .pd = { \ - .power_off = exynos_pd_power_off, \ - .power_on = exynos_pd_power_on, \ - }, \ -} - -#ifdef CONFIG_OF static void exynos_add_device_to_domain(struct exynos_pm_domain *pd, struct device *dev) { @@ -157,7 +146,7 @@ static struct notifier_block platform_nb = { .notifier_call = exynos_pm_notifier_call, }; -static __init int exynos_pm_dt_parse_domains(void) +static __init int exynos4_pm_init_power_domain(void) { struct platform_device *pdev; struct device_node *np; @@ -193,94 +182,6 @@ static __init int exynos_pm_dt_parse_domains(void) return 0; } -#else -static __init int exynos_pm_dt_parse_domains(void) -{ - return 0; -} -#endif /* CONFIG_OF */ - -static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, - struct exynos_pm_domain *pd) -{ - if (pdev->dev.bus) { - if (!pm_genpd_add_device(&pd->pd, &pdev->dev)) - pm_genpd_dev_need_restore(&pdev->dev, true); - else - pr_info("%s: error in adding %s device to %s power" - "domain\n", __func__, dev_name(&pdev->dev), - pd->name); - } -} - -EXYNOS_GPD(exynos4_pd_mfc, S5P_PMU_MFC_CONF, "pd-mfc"); -EXYNOS_GPD(exynos4_pd_g3d, S5P_PMU_G3D_CONF, "pd-g3d"); -EXYNOS_GPD(exynos4_pd_lcd0, S5P_PMU_LCD0_CONF, "pd-lcd0"); -EXYNOS_GPD(exynos4_pd_lcd1, S5P_PMU_LCD1_CONF, "pd-lcd1"); -EXYNOS_GPD(exynos4_pd_tv, S5P_PMU_TV_CONF, "pd-tv"); -EXYNOS_GPD(exynos4_pd_cam, S5P_PMU_CAM_CONF, "pd-cam"); -EXYNOS_GPD(exynos4_pd_gps, S5P_PMU_GPS_CONF, "pd-gps"); - -static struct exynos_pm_domain *exynos4_pm_domains[] = { - &exynos4_pd_mfc, - &exynos4_pd_g3d, - &exynos4_pd_lcd0, - &exynos4_pd_lcd1, - &exynos4_pd_tv, - &exynos4_pd_cam, - &exynos4_pd_gps, -}; - -static __init int exynos4_pm_init_power_domain(void) -{ - int idx; - - if (of_have_populated_dt()) - return exynos_pm_dt_parse_domains(); - - for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) { - struct exynos_pm_domain *pd = exynos4_pm_domains[idx]; - int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; - - pm_genpd_init(&pd->pd, NULL, !on); - } - -#ifdef CONFIG_S5P_DEV_FIMD0 - exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0); -#endif -#ifdef CONFIG_S5P_DEV_TV - exynos_pm_add_dev_to_genpd(&s5p_device_hdmi, &exynos4_pd_tv); - exynos_pm_add_dev_to_genpd(&s5p_device_mixer, &exynos4_pd_tv); -#endif -#ifdef CONFIG_S5P_DEV_MFC - exynos_pm_add_dev_to_genpd(&s5p_device_mfc, &exynos4_pd_mfc); -#endif -#ifdef CONFIG_S5P_DEV_FIMC0 - exynos_pm_add_dev_to_genpd(&s5p_device_fimc0, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_FIMC1 - exynos_pm_add_dev_to_genpd(&s5p_device_fimc1, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_FIMC2 - exynos_pm_add_dev_to_genpd(&s5p_device_fimc2, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_FIMC3 - exynos_pm_add_dev_to_genpd(&s5p_device_fimc3, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_CSIS0 - exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis0, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_CSIS1 - exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam); -#endif -#ifdef CONFIG_S5P_DEV_G2D - exynos_pm_add_dev_to_genpd(&s5p_device_g2d, &exynos4_pd_lcd0); -#endif -#ifdef CONFIG_S5P_DEV_JPEG - exynos_pm_add_dev_to_genpd(&s5p_device_jpeg, &exynos4_pd_cam); -#endif - return 0; -} arch_initcall(exynos4_pm_init_power_domain); int __init exynos_pm_late_initcall(void) diff --git a/arch/arm/mach-exynos/setup-fimc.c b/arch/arm/mach-exynos/setup-fimc.c deleted file mode 100644 index 6a45078d9d12..000000000000 --- a/arch/arm/mach-exynos/setup-fimc.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * - * Exynos4 camera interface GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> -#include <plat/camport.h> - -int exynos4_fimc_setup_gpio(enum s5p_camport_id id) -{ - u32 gpio8, gpio5; - u32 sfn; - int ret; - - switch (id) { - case S5P_CAMPORT_A: - gpio8 = EXYNOS4_GPJ0(0); /* PCLK, VSYNC, HREF, DATA[0:4] */ - gpio5 = EXYNOS4_GPJ1(0); /* DATA[5:7], CLKOUT, FIELD */ - sfn = S3C_GPIO_SFN(2); - break; - - case S5P_CAMPORT_B: - gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */ - gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */ - sfn = S3C_GPIO_SFN(3); - break; - - default: - WARN(1, "Wrong camport id: %d\n", id); - return -EINVAL; - } - - ret = s3c_gpio_cfgall_range(gpio8, 8, sfn, S3C_GPIO_PULL_UP); - if (ret) - return ret; - - return s3c_gpio_cfgall_range(gpio5, 5, sfn, S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-fimd0.c b/arch/arm/mach-exynos/setup-fimd0.c deleted file mode 100644 index 5665bb4e980b..000000000000 --- a/arch/arm/mach-exynos/setup-fimd0.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/mach-exynos4/setup-fimd0.c - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Base Exynos4 FIMD 0 configuration - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/fb.h> -#include <linux/gpio.h> - -#include <video/samsung_fimd.h> -#include <plat/gpio-cfg.h> - -#include <mach/map.h> - -void exynos4_fimd0_gpio_setup_24bpp(void) -{ - unsigned int reg; - - s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2)); - - /* - * Set DISPLAY_CONTROL register for Display path selection. - * - * DISPLAY_CONTROL[1:0] - * --------------------- - * 00 | MIE - * 01 | MDINE - * 10 | FIMD : selected - * 11 | FIMD - */ - reg = __raw_readl(S3C_VA_SYS + 0x0210); - reg |= (1 << 1); - __raw_writel(reg, S3C_VA_SYS + 0x0210); -} diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c deleted file mode 100644 index e2d9dfbf102c..000000000000 --- a/arch/arm/mach-exynos/setup-i2c0.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> -#include <plat/cpu.h> - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - if (soc_is_exynos5250() || soc_is_exynos5440()) - /* will be implemented with gpio function */ - return; - - s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c deleted file mode 100644 index 8d2279cc85dc..000000000000 --- a/arch/arm/mach-exynos/setup-i2c1.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c1.c - * - * Copyright (C) 2010 Samsung Electronics Co., Ltd. - * - * I2C1 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPD1(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c deleted file mode 100644 index 0ed62fc42a77..000000000000 --- a/arch/arm/mach-exynos/setup-i2c2.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c2.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * - * I2C2 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c2_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPA0(6), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c deleted file mode 100644 index 7787fd26076b..000000000000 --- a/arch/arm/mach-exynos/setup-i2c3.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c3.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C3 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c3_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPA1(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c deleted file mode 100644 index edc847f89826..000000000000 --- a/arch/arm/mach-exynos/setup-i2c4.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c4.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C4 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c4_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c deleted file mode 100644 index d88af7f75954..000000000000 --- a/arch/arm/mach-exynos/setup-i2c5.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c5.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C5 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c5_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c deleted file mode 100644 index c590286c9d3a..000000000000 --- a/arch/arm/mach-exynos/setup-i2c6.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c6.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C6 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c6_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2, - S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c deleted file mode 100644 index 1bba75568a5f..000000000000 --- a/arch/arm/mach-exynos/setup-i2c7.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/setup-i2c7.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C7 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c7_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(EXYNOS4_GPD0(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-exynos/setup-keypad.c b/arch/arm/mach-exynos/setup-keypad.c deleted file mode 100644 index 7862bfb5933d..000000000000 --- a/arch/arm/mach-exynos/setup-keypad.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/mach-exynos4/setup-keypad.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * GPIO configuration for Exynos4 KeyPad device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) -{ - /* Keypads can be of various combinations, Just making sure */ - - if (rows > 8) { - /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), - S3C_GPIO_PULL_UP); - - /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); - } else { - /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), - S3C_GPIO_PULL_UP); - } - - /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(0), cols, S3C_GPIO_SFN(3)); -} diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c deleted file mode 100644 index d5b98c866738..000000000000 --- a/arch/arm/mach-exynos/setup-sdhci-gpio.c +++ /dev/null @@ -1,152 +0,0 @@ -/* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> - -#include <mach/gpio.h> -#include <plat/gpio-cfg.h> -#include <plat/sdhci.h> - -void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK0[0:1] pins to special-function 2 */ - for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - switch (width) { - case 8: - for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-function 3 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - case 4: - for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { - /* Data pin GPK0[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} - -void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK1[0:1] pins to special-function 2 */ - for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} - -void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK2[0:1] pins to special-function 2 */ - for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - switch (width) { - case 8: - for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { - /* Data pin GPK3[3:6] to special-function 3 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - case 4: - for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) { - /* Data pin GPK2[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} - -void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK3[0:1] pins to special-function 2 */ - for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { - /* Data pin GPK3[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c deleted file mode 100644 index 4999829d1c6e..000000000000 --- a/arch/arm/mach-exynos/setup-spi.c +++ /dev/null @@ -1,45 +0,0 @@ -/* linux/arch/arm/mach-exynos4/setup-spi.c - * - * Copyright (C) 2011 Samsung Electronics Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -#ifdef CONFIG_S3C64XX_DEV_SPI0 -int s3c64xx_spi0_cfg_gpio(void) -{ - s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI1 -int s3c64xx_spi1_cfg_gpio(void) -{ - s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI2 -int s3c64xx_spi2_cfg_gpio(void) -{ - s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5)); - s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2, - S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP); - return 0; -} -#endif diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c deleted file mode 100644 index 6af40662a449..000000000000 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <mach/regs-pmu.h> -#include <mach/regs-usb-phy.h> -#include <plat/cpu.h> -#include <plat/usb-phy.h> - -static atomic_t host_usage; - -static int exynos4_usb_host_phy_is_on(void) -{ - return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1; -} - -static void exynos4210_usb_phy_clkset(struct platform_device *pdev) -{ - struct clk *xusbxti_clk; - u32 phyclk; - - xusbxti_clk = clk_get(&pdev->dev, "xusbxti"); - if (xusbxti_clk && !IS_ERR(xusbxti_clk)) { - if (soc_is_exynos4210()) { - /* set clock frequency for PLL */ - phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4210_CLKSEL_MASK; - - switch (clk_get_rate(xusbxti_clk)) { - case 12 * MHZ: - phyclk |= EXYNOS4210_CLKSEL_12M; - break; - case 48 * MHZ: - phyclk |= EXYNOS4210_CLKSEL_48M; - break; - default: - case 24 * MHZ: - phyclk |= EXYNOS4210_CLKSEL_24M; - break; - } - writel(phyclk, EXYNOS4_PHYCLK); - } else if (soc_is_exynos4212() || soc_is_exynos4412()) { - /* set clock frequency for PLL */ - phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4X12_CLKSEL_MASK; - - switch (clk_get_rate(xusbxti_clk)) { - case 9600 * KHZ: - phyclk |= EXYNOS4X12_CLKSEL_9600K; - break; - case 10 * MHZ: - phyclk |= EXYNOS4X12_CLKSEL_10M; - break; - case 12 * MHZ: - phyclk |= EXYNOS4X12_CLKSEL_12M; - break; - case 19200 * KHZ: - phyclk |= EXYNOS4X12_CLKSEL_19200K; - break; - case 20 * MHZ: - phyclk |= EXYNOS4X12_CLKSEL_20M; - break; - default: - case 24 * MHZ: - /* default reference clock */ - phyclk |= EXYNOS4X12_CLKSEL_24M; - break; - } - writel(phyclk, EXYNOS4_PHYCLK); - } - clk_put(xusbxti_clk); - } -} - -static int exynos4210_usb_phy0_init(struct platform_device *pdev) -{ - u32 rstcon; - - writel(readl(S5P_USBDEVICE_PHY_CONTROL) | S5P_USBDEVICE_PHY_ENABLE, - S5P_USBDEVICE_PHY_CONTROL); - - exynos4210_usb_phy_clkset(pdev); - - /* set to normal PHY0 */ - writel((readl(EXYNOS4_PHYPWR) & ~PHY0_NORMAL_MASK), EXYNOS4_PHYPWR); - - /* reset PHY0 and Link */ - rstcon = readl(EXYNOS4_RSTCON) | PHY0_SWRST_MASK; - writel(rstcon, EXYNOS4_RSTCON); - udelay(10); - - rstcon &= ~PHY0_SWRST_MASK; - writel(rstcon, EXYNOS4_RSTCON); - - return 0; -} - -static int exynos4210_usb_phy0_exit(struct platform_device *pdev) -{ - writel((readl(EXYNOS4_PHYPWR) | PHY0_ANALOG_POWERDOWN | - PHY0_OTG_DISABLE), EXYNOS4_PHYPWR); - - writel(readl(S5P_USBDEVICE_PHY_CONTROL) & ~S5P_USBDEVICE_PHY_ENABLE, - S5P_USBDEVICE_PHY_CONTROL); - - return 0; -} - -static int exynos4210_usb_phy1_init(struct platform_device *pdev) -{ - struct clk *otg_clk; - u32 rstcon; - int err; - - atomic_inc(&host_usage); - - otg_clk = clk_get(&pdev->dev, "otg"); - if (IS_ERR(otg_clk)) { - dev_err(&pdev->dev, "Failed to get otg clock\n"); - return PTR_ERR(otg_clk); - } - - err = clk_enable(otg_clk); - if (err) { - clk_put(otg_clk); - return err; - } - - if (exynos4_usb_host_phy_is_on()) - return 0; - - writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE, - S5P_USBHOST_PHY_CONTROL); - - exynos4210_usb_phy_clkset(pdev); - - /* floating prevention logic: disable */ - writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON); - - /* set to normal HSIC 0 and 1 of PHY1 */ - writel((readl(EXYNOS4_PHYPWR) & ~PHY1_HSIC_NORMAL_MASK), - EXYNOS4_PHYPWR); - - /* set to normal standard USB of PHY1 */ - writel((readl(EXYNOS4_PHYPWR) & ~PHY1_STD_NORMAL_MASK), EXYNOS4_PHYPWR); - - /* reset all ports of both PHY and Link */ - rstcon = readl(EXYNOS4_RSTCON) | HOST_LINK_PORT_SWRST_MASK | - PHY1_SWRST_MASK; - writel(rstcon, EXYNOS4_RSTCON); - udelay(10); - - rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK); - writel(rstcon, EXYNOS4_RSTCON); - udelay(80); - - clk_disable(otg_clk); - clk_put(otg_clk); - - return 0; -} - -static int exynos4210_usb_phy1_exit(struct platform_device *pdev) -{ - struct clk *otg_clk; - int err; - - if (atomic_dec_return(&host_usage) > 0) - return 0; - - otg_clk = clk_get(&pdev->dev, "otg"); - if (IS_ERR(otg_clk)) { - dev_err(&pdev->dev, "Failed to get otg clock\n"); - return PTR_ERR(otg_clk); - } - - err = clk_enable(otg_clk); - if (err) { - clk_put(otg_clk); - return err; - } - - writel((readl(EXYNOS4_PHYPWR) | PHY1_STD_ANALOG_POWERDOWN), - EXYNOS4_PHYPWR); - - writel(readl(S5P_USBHOST_PHY_CONTROL) & ~S5P_USBHOST_PHY_ENABLE, - S5P_USBHOST_PHY_CONTROL); - - clk_disable(otg_clk); - clk_put(otg_clk); - - return 0; -} - -int s5p_usb_phy_init(struct platform_device *pdev, int type) -{ - if (type == USB_PHY_TYPE_DEVICE) - return exynos4210_usb_phy0_init(pdev); - else if (type == USB_PHY_TYPE_HOST) - return exynos4210_usb_phy1_init(pdev); - - return -EINVAL; -} - -int s5p_usb_phy_exit(struct platform_device *pdev, int type) -{ - if (type == USB_PHY_TYPE_DEVICE) - return exynos4210_usb_phy0_exit(pdev); - else if (type == USB_PHY_TYPE_HOST) - return exynos4210_usb_phy1_exit(pdev); - - return -EINVAL; -} diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index f8ed2de0a678..ca27cc9ac4bf 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -6,7 +6,7 @@ config PLAT_SAMSUNG bool - depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P + depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS default y select GENERIC_IRQ_CHIP select NO_IOPORT @@ -15,12 +15,10 @@ config PLAT_SAMSUNG config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) default y select ARCH_REQUIRE_GPIOLIB - select ARM_GIC if ARCH_EXYNOS - select ARM_VIC if !ARCH_EXYNOS - select GIC_NON_BANKED if ARCH_EXYNOS4 + select ARM_VIC select NO_IOPORT select PLAT_SAMSUNG select S3C_GPIO_TRACK @@ -60,6 +58,20 @@ config S3C_LOWLEVEL_UART_PORT this configuration should be between zero and two. The port must have been initialised by the boot-loader before use. +config SAMSUNG_ATAGS + def_bool n + depends on !ARCH_MULTIPLATFORM + depends on ATAGS + help + This option enables ATAGS based boot support code for + Samsung platforms, including static platform devices, legacy + clock, timer and interrupt initialization, etc. + + Platforms that support only DT based boot need not to select + this option. + +if SAMSUNG_ATAGS + # timer options config SAMSUNG_HRT @@ -367,11 +379,6 @@ config S5P_DEV_JPEG help Compile in platform device definitions for JPEG codec -config S5P_DEV_MFC - bool - help - Compile in setup memory (init) code for MFC - config S5P_DEV_ONENAND bool help @@ -412,6 +419,21 @@ config S3C_DMA help Internal configuration for S3C DMA core +config S5P_IRQ_PM + bool + default y if S5P_PM + help + Legacy IRQ power management for S5P platforms + +config SAMSUNG_PM_GPIO + bool + default y if GPIO_SAMSUNG && PM + help + Include legacy GPIO power management code for platforms not using + pinctrl-samsung driver. + +endif + config SAMSUNG_DMADEV bool select ARM_AMBA @@ -421,6 +443,11 @@ config SAMSUNG_DMADEV help Use DMA device engine for PL330 DMAC. +config S5P_DEV_MFC + bool + help + Compile in setup memory (init) code for MFC + comment "Power management" config SAMSUNG_PM_DEBUG diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index a23c460299a1..6348ae2e3b46 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -31,10 +31,10 @@ obj-$(CONFIG_S3C_ADC) += adc.o # devices -obj-y += platformdata.o +obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o -obj-y += devs.o -obj-y += dev-uart.o +obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o +obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o @@ -52,10 +52,11 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += pm-gpio.o +obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o -obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o +obj-$(CONFIG_S5P_PM) += s5p-pm.o +obj-$(CONFIG_S5P_IRQ_PM) += s5p-irq-pm.o obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index f6fcadeee969..5d47ca35cabd 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -166,6 +166,7 @@ extern void s3c_pm_check_store(void); */ extern void s3c_pm_configure_extint(void); +#ifdef CONFIG_GPIO_SAMSUNG /** * samsung_pm_restore_gpios() - restore the state of the gpios after sleep. * @@ -181,6 +182,10 @@ extern void samsung_pm_restore_gpios(void); * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios(). */ extern void samsung_pm_save_gpios(void); +#else +static inline void samsung_pm_restore_gpios(void) {} +static inline void samsung_pm_save_gpios(void) {} +#endif extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 79d10fca9090..3e5c4619caa5 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -87,7 +87,7 @@ void __init s3c24xx_init_clocks(int xtal) } /* uart management */ - +#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) static int nr_uarts __initdata = 0; static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; @@ -134,11 +134,12 @@ void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) if (cpu == NULL) return; - if (cpu->init_uarts == NULL) { + if (cpu->init_uarts == NULL && IS_ENABLED(CONFIG_SAMSUNG_ATAGS)) { printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); } else (cpu->init_uarts)(cfg, no); } +#endif static int __init s3c_arch_init(void) { @@ -152,8 +153,9 @@ static int __init s3c_arch_init(void) ret = (cpu->init)(); if (ret != 0) return ret; - +#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts); +#endif return ret; } diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index c2ff92c30bdf..a8de3cfe2ee1 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -192,7 +192,8 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = { .resume = samsung_gpio_pm_2bit_resume, }; -#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) +#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \ + || defined(CONFIG_ARCH_EXYNOS) static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); @@ -302,7 +303,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = { .save = samsung_gpio_pm_4bit_save, .resume = samsung_gpio_pm_4bit_resume, }; -#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ +#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */ /** * samsung_pm_save_gpio() - save gpio chip data for suspend diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index bd7124c87fea..ea3613642451 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -22,13 +22,17 @@ #include <asm/cacheflush.h> #include <asm/suspend.h> -#include <mach/hardware.h> -#include <mach/map.h> #include <plat/regs-serial.h> + +#ifdef CONFIG_SAMSUNG_ATAGS +#include <mach/hardware.h> +#include <mach/map.h> #include <mach/regs-clock.h> #include <mach/regs-irq.h> #include <mach/irqs.h> +#endif + #include <asm/irq.h> #include <plat/pm.h> diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index a93fb6fb6606..ad51f85fbd01 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -17,10 +17,12 @@ #include <linux/of_fdt.h> #include <linux/of.h> +#include <plat/mfc.h> + +#ifdef CONFIG_SAMSUNG_ATAGS #include <mach/map.h> #include <mach/irqs.h> #include <plat/devs.h> -#include <plat/mfc.h> static struct resource s5p_mfc_resource[] = { [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), @@ -61,6 +63,10 @@ struct platform_device s5p_device_mfc_r = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; +#else +static struct platform_device s5p_device_mfc_l; +static struct platform_device s5p_device_mfc_r; +#endif struct s5p_mfc_reserved_mem { phys_addr_t base; @@ -70,6 +76,7 @@ struct s5p_mfc_reserved_mem { static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata; + void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, phys_addr_t lbase, unsigned int lsize) { @@ -93,6 +100,7 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, } } +#ifdef CONFIG_SAMSUNG_ATAGS static int __init s5p_mfc_memory_init(void) { int i; @@ -111,6 +119,7 @@ static int __init s5p_mfc_memory_init(void) return 0; } device_initcall(s5p_mfc_memory_init); +#endif #ifdef CONFIG_OF int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname, |