diff options
author | Magnus Damm <damm@opensource.se> | 2011-08-18 07:44:07 +0200 |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2011-08-29 09:50:08 +0200 |
commit | 28626632d83696ab3c8f2b9d5d8a658a1787551f (patch) | |
tree | 1d6a7d5423036b6a0f116bb11f673e5306963dd9 /arch | |
parent | Linux 3.1-rc4 (diff) | |
download | linux-28626632d83696ab3c8f2b9d5d8a658a1787551f.tar.xz linux-28626632d83696ab3c8f2b9d5d8a658a1787551f.zip |
ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X support
Kota2 base board support including the on-chip SCIFA2
serial console and the on-board SMSC911X ethernet port.
The s73a0 SMP bits are also updated to include Kota2.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-shmobile/Kconfig | 7 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/board-kota2.c | 168 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/platsmp.c | 10 |
4 files changed, 182 insertions, 4 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0c8f6cf3e948..c1b45342e1fb 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -69,6 +69,11 @@ config MACH_MACKEREL depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB +config MACH_KOTA2 + bool "KOTA2 board" + select ARCH_REQUIRE_GPIOLIB + depends on ARCH_SH73A0 + comment "SH-Mobile System Configuration" menu "Memory configuration" @@ -78,6 +83,7 @@ config MEMORY_START default "0x50000000" if MACH_G3EVM default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ MACH_MACKEREL + default "0x41000000" if MACH_KOTA2 default "0x00000000" ---help--- Tweak this only when porting to a new machine which does not @@ -89,6 +95,7 @@ config MEMORY_SIZE default "0x08000000" if MACH_G3EVM default "0x08000000" if MACH_G4EVM default "0x20000000" if MACH_AG5EVM + default "0x1e000000" if MACH_KOTA2 default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL default "0x04000000" help diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 612b27000c3e..2aec2f732515 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o +obj-$(CONFIG_MACH_KOTA2) += board-kota2.o # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c new file mode 100644 index 000000000000..4ab05e855077 --- /dev/null +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -0,0 +1,168 @@ +/* + * kota2 board support + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj@renesas.com> + * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/smsc911x.h> +#include <linux/gpio.h> +#include <mach/hardware.h> +#include <mach/sh73a0.h> +#include <mach/common.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/traps.h> + +static struct resource smsc9220_resources[] = { + [0] = { + .start = 0x14000000, /* CS5A */ + .end = 0x140000ff, /* A1->A7 */ + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(33), /* PINTA2 @ PORT144 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc9220_platdata = { + .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */ + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device eth_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &smsc9220_platdata, + }, + .resource = smsc9220_resources, + .num_resources = ARRAY_SIZE(smsc9220_resources), +}; + +static struct platform_device *kota2_devices[] __initdata = { + ð_device, +}; + +static struct map_desc kota2_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +static void __init kota2_map_io(void) +{ + iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc)); + + /* setup early devices and console here as well */ + sh73a0_add_early_devices(); + shmobile_setup_console(); +} + +#define PINTER0A 0xe69000a0 +#define PINTCR0A 0xe69000b0 + +void __init kota2_init_irq(void) +{ + sh73a0_init_irq(); + + /* setup PINT: enable PINTA2 as active low */ + __raw_writel(1 << 29, PINTER0A); + __raw_writew(2 << 10, PINTCR0A); +} + +static void __init kota2_init(void) +{ + sh73a0_pinmux_init(); + + /* SCIFA2 (UART2) */ + gpio_request(GPIO_FN_SCIFA2_TXD1, NULL); + gpio_request(GPIO_FN_SCIFA2_RXD1, NULL); + gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL); + gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL); + + /* SMSC911X */ + gpio_request(GPIO_FN_D0_NAF0, NULL); + gpio_request(GPIO_FN_D1_NAF1, NULL); + gpio_request(GPIO_FN_D2_NAF2, NULL); + gpio_request(GPIO_FN_D3_NAF3, NULL); + gpio_request(GPIO_FN_D4_NAF4, NULL); + gpio_request(GPIO_FN_D5_NAF5, NULL); + gpio_request(GPIO_FN_D6_NAF6, NULL); + gpio_request(GPIO_FN_D7_NAF7, NULL); + gpio_request(GPIO_FN_D8_NAF8, NULL); + gpio_request(GPIO_FN_D9_NAF9, NULL); + gpio_request(GPIO_FN_D10_NAF10, NULL); + gpio_request(GPIO_FN_D11_NAF11, NULL); + gpio_request(GPIO_FN_D12_NAF12, NULL); + gpio_request(GPIO_FN_D13_NAF13, NULL); + gpio_request(GPIO_FN_D14_NAF14, NULL); + gpio_request(GPIO_FN_D15_NAF15, NULL); + gpio_request(GPIO_FN_CS5A_, NULL); + gpio_request(GPIO_FN_WE0__FWE, NULL); + gpio_request(GPIO_PORT144, NULL); /* PINTA2 */ + gpio_direction_input(GPIO_PORT144); + gpio_request(GPIO_PORT145, NULL); /* RESET */ + gpio_direction_output(GPIO_PORT145, 1); + +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 64K*8way */ + l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff); +#endif + sh73a0_add_standard_devices(); + platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices)); +} + +static void __init kota2_timer_init(void) +{ + sh73a0_clock_init(); + shmobile_timer.init(); + return; +} + +struct sys_timer kota2_timer = { + .init = kota2_timer_init, +}; + +MACHINE_START(KOTA2, "kota2") + .map_io = kota2_map_io, + .init_irq = kota2_init_irq, + .handle_irq = shmobile_handle_irq_gic, + .init_machine = kota2_init, + .timer = &kota2_timer, +MACHINE_END diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 66f980625a33..ccd81dac42f8 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -21,9 +21,11 @@ #include <asm/mach-types.h> #include <mach/common.h> +#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2()) + static unsigned int __init shmobile_smp_get_core_count(void) { - if (machine_is_ag5evm()) + if (is_sh73a0()) return sh73a0_get_core_count(); return 1; @@ -31,7 +33,7 @@ static unsigned int __init shmobile_smp_get_core_count(void) static void __init shmobile_smp_prepare_cpus(void) { - if (machine_is_ag5evm()) + if (is_sh73a0()) sh73a0_smp_prepare_cpus(); } @@ -39,13 +41,13 @@ void __cpuinit platform_secondary_init(unsigned int cpu) { trace_hardirqs_off(); - if (machine_is_ag5evm()) + if (is_sh73a0()) sh73a0_secondary_init(cpu); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { - if (machine_is_ag5evm()) + if (is_sh73a0()) return sh73a0_boot_secondary(cpu); return -ENOSYS; |