diff options
author | Arnd Bergmann <arnd@arndb.de> | 2017-11-07 16:21:18 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2017-11-07 16:21:18 +0100 |
commit | 87f89ace81d0978a1049a92c6a9921de5aa0a9e3 (patch) | |
tree | 231cbb600fb13960d3a76257a961bc9c0c303d2f /arch | |
parent | Merge tag 'sunxi-dt64-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/... (diff) | |
parent | ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reload (diff) | |
download | linux-87f89ace81d0978a1049a92c6a9921de5aa0a9e3.tar.xz linux-87f89ace81d0978a1049a92c6a9921de5aa0a9e3.zip |
Merge tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 updates for 4.15 part2" from Heiko Stübner:
CEC support for the two rk3288-firefly variants and general hdmi support
for the firefly-reload. A lot of additions and corrections for the
rk3288-vyasa and thermal support for the rv1108.
* tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reload
ARM: dts: rockchip: define the two possible rk3288 CEC pins
ARM: dts: rockchip: add the cec clk for dw-hdmi on rk3288
ARM: dts: rockchip: Add io domains for rk3288-vyasa
ARM: dts: rockchip: Add usb otg for rk3288-vyasa
ARM: dts: rockchip: Add usb host for rk3288-vyasa
ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
ARM: dts: rockchip: Add regulators for rk3288-vyasa
ARM: dts: rockchip: Use vmmc-supply from PMIC on rk3288-vyasa
ARM: dts: rockchip: Remove vdd_log from rk808, DCDC_REG1 on rk3288-vyasa
ARM: dts: rockchip: enable tsadc module on RV1108 evaluation board
ARM: dts: rockchip: add thermal nodes for RV1108 SoC
ARM: dts: rockchip: add tsadc node for RV1108 SoC
ARM: dts: rockchip: add RGA device node for RK3288
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/rk3288-firefly-reload.dts | 11 | ||||
-rw-r--r-- | arch/arm/boot/dts/rk3288-vyasa.dts | 179 | ||||
-rw-r--r-- | arch/arm/boot/dts/rk3288.dtsi | 23 | ||||
-rw-r--r-- | arch/arm/boot/dts/rv1108-evb.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/rv1108.dtsi | 67 |
6 files changed, 270 insertions, 16 deletions
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 5f05815f47e0..5f1e336dbaac 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -184,6 +184,7 @@ regulator-name = "vdd10_lcd"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-always-on; }; vcca_18: REG7 { @@ -223,6 +224,7 @@ regulator-name = "vcc18_lcd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 7da0947ababb..eab176e3dfc3 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -226,6 +226,13 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec_c0>; + status = "okay"; +}; + &i2c0 { hym8563: hym8563@51 { compatible = "haoyu,hym8563"; @@ -255,6 +262,10 @@ }; }; +&i2c5 { + status = "okay"; +}; + &i2s { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 3546eb8629c7..9842a006e823 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -56,25 +56,98 @@ device_type = "memory"; }; - vcc_sd: sdmmc-regulator { + dc12_vbat: dc12-vbat { compatible = "regulator-fixed"; - gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; + regulator-name = "dc12_vbat"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vboot_3v3: vboot-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vboot_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; }; vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vboot_5v: vboot-5v { + compatible = "regulator-fixed"; + regulator-name = "vboot_sv"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + v3g_3v3: v3g-3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3g_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vsus_5v: vsus-5v { + compatible = "regulator-fixed"; + regulator-name = "vsus_5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vusb1_5v: vusb1-5v { + compatible = "regulator-fixed"; + regulator-name = "vusb1_5v"; + enable-active-high; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */ + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + + vusb2_5v: vusb2-5v { + compatible = "regulator-fixed"; + regulator-name = "vusb2_5v"; + enable-active-high; + gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */ + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pwr_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; }; }; @@ -82,6 +155,22 @@ cpu0-supply = <&vdd_cpu>; }; +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "okay"; +}; + &gpu { mali-supply = <&vdd_gpu>; status = "okay"; @@ -121,8 +210,8 @@ vcc12-supply = <&vcc_io>; regulators { - vdd_cpu: vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; + vdd_cpu: DCDC_REG1 { + regulator-name = "vdd_arm"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -260,8 +349,8 @@ }; }; - vcc33_sd: SWITCH_REG1 { - regulator-name = "vcc33_sd"; + vcc_sd: SWITCH_REG1 { + regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -289,6 +378,21 @@ status = "okay"; }; +&io_domains { + status = "okay"; + + audio-supply = <&vcc_18>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc_io>; + flash0-suuply = <&vcc_18>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830 = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -312,6 +416,24 @@ status = "okay"; }; +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + pinctrl-names = "default"; + pinctrl-0 = <&phy_pwr_en>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + &vopb { status = "okay"; }; @@ -333,15 +455,44 @@ }; &pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - sdmmc { - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + usb_host { + phy_pwr_en: phy-pwr-en { + rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + usb2_pwr_en: usb2-pwr-en { + rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cd7b081a1c6a..cd24894ee5c6 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -972,6 +972,17 @@ status = "disabled"; }; + rga: rga@ff920000 { + compatible = "rockchip,rk3288-rga"; + reg = <0x0 0xff920000 0x0 0x180>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; + clock-names = "aclk", "hclk", "sclk"; + power-domains = <&power RK3288_PD_VIO>; + resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>; + reset-names = "core", "axi", "ahb"; + }; + vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; reg = <0x0 0xff930000 0x0 0x19c>; @@ -1167,8 +1178,8 @@ reg-io-width = <4>; rockchip,grf = <&grf>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; - clock-names = "iahb", "isfr"; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; + clock-names = "iahb", "isfr", "cec"; power-domains = <&power RK3288_PD_VIO>; status = "disabled"; @@ -1470,6 +1481,14 @@ }; hdmi { + hdmi_cec_c0: hdmi-cec-c0 { + rockchip,pins = <7 RK_PC0 RK_FUNC_2 &pcfg_pull_none>; + }; + + hdmi_cec_c7: hdmi-cec-c7 { + rockchip,pins = <7 RK_PC7 RK_FUNC_4 &pcfg_pull_none>; + }; + hdmi_ddc: hdmi-ddc { rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>, <7 20 RK_FUNC_2 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 86a57f823616..70f0106d1252 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -222,6 +222,10 @@ status = "okay"; }; +&tsadc { + status = "okay"; +}; + &u2phy { status = "okay"; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index e7cd1315db1b..76ea24636feb 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -43,6 +43,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/rv1108-cru.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; #size-cells = <1>; @@ -70,6 +71,8 @@ compatible = "arm,cortex-a7"; reg = <0xf00>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <75>; operating-points-v2 = <&cpu_opp_table>; }; }; @@ -329,6 +332,60 @@ status = "disabled"; }; + thermal-zones { + soc_thermal: soc-thermal { + polling-delay-passive = <20>; + polling-delay = <1000>; + sustainable-power = <50>; + thermal-sensors = <&tsadc 0>; + + trips { + threshold: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + target: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + soc_crit: soc-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + }; + }; + }; + + tsadc: tsadc@10370000 { + compatible = "rockchip,rv1108-tsadc"; + reg = <0x10370000 0x100>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <750000>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + rockchip,hw-tshut-temp = <120000>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + adc: adc@1038c000 { compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc"; reg = <0x1038c000 0x100>; @@ -740,6 +797,16 @@ }; }; + tsadc { + otp_out: otp-out { + rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>; + }; + + otp_gpio: otp-gpio { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, |