diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-01-20 20:00:03 +0100 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-01-20 20:00:03 +0100 |
commit | 1ed46384f85bcf05fc9b6605f9fd54e1f81a331d (patch) | |
tree | 4dc25d90d271d1dfc91332af7a751ef9ac9fd468 /arch | |
parent | Merge tag 'drm-fixes-2023-01-20' of git://anongit.freedesktop.org/drm/drm (diff) | |
parent | firmware: zynqmp: fix declarations for gcc-13 (diff) | |
download | linux-1ed46384f85bcf05fc9b6605f9fd54e1f81a331d.tar.xz linux-1ed46384f85bcf05fc9b6605f9fd54e1f81a331d.zip |
Merge tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT and driver fixes from Arnd Bergmann:
"Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms,
including:
- A regression fix for SDHCI controllers on Inforce 6540, and another
SDHCI fix on SM8350
- Reenable cluster idle on sm8250 after the the code fix is upstream
- multiple fixes for the QMP PHY binding, needing an incompatible dt
change
- The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus
6P, to avoid instabilities caused by use of protected memory
regions
- Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
clock error
- A couple of verdin-imx8mm DT fixes for audio playback support
- Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees
- Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
eMMC CMD8 CRC error in HS400ES/HS400 mode
The remaining ARM and RISC-V platforms only have very few smaller dts
bugfixes this time:
- A fix for the SiFive unmatched board's PCI memory space
- A revert to fix a regression with GPIO on Marvell Armada
- A fix for the UART address on Marvell AC5
- Missing chip-select phandles for stm32 boards
- Selecting the correct clock for the sam9x60 memory controller
- Amlogic based Odroid-HC4 needs a revert to restore USB
functionality.
And finally, there are some minor code fixes:
- Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq
firmware
- memory controller driver fixes for an OMAP regression and older
bugs on tegra, atmel and mvebu
- reset controller fixes for ti-sci and uniphier platforms
- ARM SCMI firmware fixes for a couple of rare corner cases
- Qualcomm platform driver fixes for incorrect error handling and a
backwards compatibility fix for the apr driver using older dtb
- NXP i.MX SoC driver fixes for HDMI output, error handling in the
imx8 soc-id and missing reference counting on older cpuid code"
* tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (60 commits)
firmware: zynqmp: fix declarations for gcc-13
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
ARM: omap1: fix building gpio15xx
ARM: omap1: fix !ARCH_OMAP1_ANY link failures
firmware: raspberrypi: Fix type assignment
arm64: dts: qcom: msm8992-libra: Fix the memory map
arm64: dts: qcom: msm8992: Don't use sfpb mutex
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
arm64: dts: msm8994-angler: fix the memory map
arm64: dts: marvell: AC5/AC5X: Fix address for UART1
ARM: footbridge: drop unnecessary inclusion
Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
ARM: pxa: enable PXA310/PXA320 for DT-only build
riscv: dts: sifive: fu740: fix size of pcie 32bit memory
soc: qcom: apr: Make qcom,protection-domain optional again
...
Diffstat (limited to 'arch')
61 files changed, 219 insertions, 218 deletions
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 12933eff419f..446861b6b17b 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -304,7 +304,7 @@ }; gpio0: gpio@18100 { - compatible = "marvell,armadaxp-gpio", + compatible = "marvell,armada-370-gpio", "marvell,orion-gpio"; reg = <0x18100 0x40>, <0x181c0 0x08>; reg-names = "gpio", "pwm"; @@ -323,7 +323,7 @@ }; gpio1: gpio@18140 { - compatible = "marvell,armadaxp-gpio", + compatible = "marvell,armada-370-gpio", "marvell,orion-gpio"; reg = <0x18140 0x40>, <0x181c8 0x08>; reg-names = "gpio", "pwm"; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index 1e05208d9f34..9d1cac49c022 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -213,7 +213,7 @@ }; gpio0: gpio@18100 { - compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio"; + compatible = "marvell,orion-gpio"; reg = <0x18100 0x40>; ngpios = <32>; gpio-controller; @@ -227,7 +227,7 @@ }; gpio1: gpio@18140 { - compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio"; + compatible = "marvell,orion-gpio"; reg = <0x18140 0x40>; ngpios = <28>; gpio-controller; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 37d0cffea99c..70c4a4852256 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -488,7 +488,7 @@ scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9547"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index 4bc4371e6bae..4b81a975c979 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -632,7 +632,6 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts index 162dc259edc8..5a74c7f68eb6 100644 --- a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts +++ b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts @@ -32,7 +32,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/imx7d-pico-dwarf.dts index 5162fe227d1e..fdc10563f147 100644 --- a/arch/arm/boot/dts/imx7d-pico-dwarf.dts +++ b/arch/arm/boot/dts/imx7d-pico-dwarf.dts @@ -32,7 +32,7 @@ }; &i2c1 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; @@ -52,7 +52,7 @@ }; &i2c4 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/imx7d-pico-nymph.dts index 104a85254adb..5afb1674e012 100644 --- a/arch/arm/boot/dts/imx7d-pico-nymph.dts +++ b/arch/arm/boot/dts/imx7d-pico-nymph.dts @@ -43,7 +43,7 @@ }; &i2c1 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; @@ -64,7 +64,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts index 44cd72f1b1be..116e59a3b76d 100644 --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -19,16 +19,16 @@ serial@f995e000 { status = "okay"; }; + }; +}; - sdhci@f9824900 { - bus-width = <8>; - non-removable; - status = "okay"; - }; +&sdhc_1 { + bus-width = <8>; + non-removable; + status = "okay"; +}; - sdhci@f98a4900 { - cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; - bus-width = <4>; - }; - }; +&sdhc_2 { + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; + bus-width = <4>; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fe30abfff90a..4b0d2b4f4b6a 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -421,7 +421,7 @@ status = "disabled"; }; - mmc@f9824900 { + sdhc_1: mmc@f9824900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc", "core"; @@ -434,7 +434,7 @@ status = "disabled"; }; - mmc@f98a4900 { + sdhc_2: mmc@f98a4900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc", "core"; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 8f5477e307dd..37a5d96aaf64 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -564,7 +564,7 @@ mpddrc: mpddrc@ffffe800 { compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc"; reg = <0xffffe800 0x200>; - clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "ddrck", "mpddr"; }; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi index d865ab5d866b..dd23de85100c 100644 --- a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi +++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi @@ -101,8 +101,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index aef02e6421a3..7d11c50b9e40 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -391,8 +391,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 002f221f1694..c06edd2eacb0 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -428,8 +428,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 134a798ad3f2..bb40fb46da81 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -247,8 +247,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x200000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 42ed4a04a12e..6280c5e86a12 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -345,7 +345,7 @@ }; &i2c2 { - tca9548@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; pinctrl-0 = <&pinctrl_i2c_mux_reset>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index f892977da9e4..c00d39562a10 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -340,7 +340,7 @@ }; &i2c2 { - tca9548@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; pinctrl-0 = <&pinctrl_i2c_mux_reset>; pinctrl-names = "default"; diff --git a/arch/arm/mach-footbridge/isa-rtc.c b/arch/arm/mach-footbridge/isa-rtc.c index b8f741a3a37e..237b828dd2f1 100644 --- a/arch/arm/mach-footbridge/isa-rtc.c +++ b/arch/arm/mach-footbridge/isa-rtc.c @@ -20,7 +20,6 @@ #include <linux/init.h> #include <linux/mc146818rtc.h> -#include <linux/bcd.h> #include <linux/io.h> #include "common.h" diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c index 3e63445cde06..cc86977d0a34 100644 --- a/arch/arm/mach-imx/cpu-imx25.c +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim"); iim_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!iim_base); rev = readl(iim_base + MXC_IIMSREV); iounmap(iim_base); diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index bf70e13bbe9e..1d2893908368 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm"); ccm_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!ccm_base); /* * now we have access to the IO registers. As we need diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index b9c24b851d1a..35c544924e50 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim"); iim_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!iim_base); /* read SREV register from IIM module */ diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index 80e7d8ab9f1b..1fe75b39c2d9 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim"); iim_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!iim_base); rev = imx_readl(iim_base + MXC_IIMSREV); diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index ad56263778f9..a67c89bf155d 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat) np = of_find_compatible_node(NULL, NULL, compat); iim_base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!iim_base); srev = readl(iim_base + IIM_SREV) & 0xff; diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 538a960257cc..7ec7ada287e0 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -4,6 +4,7 @@ menuconfig ARCH_OMAP1 depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN depends on ATAGS + select ARCH_OMAP select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select CLKSRC_MMIO @@ -45,10 +46,6 @@ config ARCH_OMAP16XX select CPU_ARM926T select OMAP_DM_TIMER -config ARCH_OMAP1_ANY - select ARCH_OMAP - def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX - config ARCH_OMAP bool diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 506074b86333..0615cb0ba580 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,8 +3,6 @@ # Makefile for the linux kernel. # -ifdef CONFIG_ARCH_OMAP1_ANY - # Common support obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ serial.o devices.o dma.o omap-dma.o fb.o @@ -59,5 +57,3 @@ obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o - -endif diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index c675f11de99d..61fa26efd865 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -11,6 +11,7 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> #include <linux/soc/ti/omap1-soc.h> +#include <asm/irq.h> #include "irqs.h" diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index d2db9b8aed3f..0074b011a05a 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -22,17 +22,14 @@ * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ -static struct map_desc omap_io_desc[] __initdata = { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) +static struct map_desc omap7xx_io_desc[] __initdata = { { .virtual = OMAP1_IO_VIRT, .pfn = __phys_to_pfn(OMAP1_IO_PHYS), .length = OMAP1_IO_SIZE, .type = MT_DEVICE - } -}; - -#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -static struct map_desc omap7xx_io_desc[] __initdata = { + }, { .virtual = OMAP7XX_DSP_BASE, .pfn = __phys_to_pfn(OMAP7XX_DSP_START), @@ -50,6 +47,12 @@ static struct map_desc omap7xx_io_desc[] __initdata = { #ifdef CONFIG_ARCH_OMAP15XX static struct map_desc omap1510_io_desc[] __initdata = { { + .virtual = OMAP1_IO_VIRT, + .pfn = __phys_to_pfn(OMAP1_IO_PHYS), + .length = OMAP1_IO_SIZE, + .type = MT_DEVICE + }, + { .virtual = OMAP1510_DSP_BASE, .pfn = __phys_to_pfn(OMAP1510_DSP_START), .length = OMAP1510_DSP_SIZE, @@ -66,6 +69,12 @@ static struct map_desc omap1510_io_desc[] __initdata = { #if defined(CONFIG_ARCH_OMAP16XX) static struct map_desc omap16xx_io_desc[] __initdata = { { + .virtual = OMAP1_IO_VIRT, + .pfn = __phys_to_pfn(OMAP1_IO_PHYS), + .length = OMAP1_IO_SIZE, + .type = MT_DEVICE + }, + { .virtual = OMAP16XX_DSP_BASE, .pfn = __phys_to_pfn(OMAP16XX_DSP_START), .length = OMAP16XX_DSP_SIZE, @@ -79,18 +88,9 @@ static struct map_desc omap16xx_io_desc[] __initdata = { }; #endif -/* - * Maps common IO regions for omap1 - */ -static void __init omap1_map_common_io(void) -{ - iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); -} - #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) void __init omap7xx_map_io(void) { - omap1_map_common_io(); iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); } #endif @@ -98,7 +98,6 @@ void __init omap7xx_map_io(void) #ifdef CONFIG_ARCH_OMAP15XX void __init omap15xx_map_io(void) { - omap1_map_common_io(); iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); } #endif @@ -106,7 +105,6 @@ void __init omap15xx_map_io(void) #if defined(CONFIG_ARCH_OMAP16XX) void __init omap16xx_map_io(void) { - omap1_map_common_io(); iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); } #endif diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 05c25c432449..b1632cbe37e6 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -89,7 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { #define OMAP1610_MCBSP2_BASE 0xfffb1000 #define OMAP1610_MCBSP3_BASE 0xe1017000 -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) struct resource omap7xx_mcbsp_res[][6] = { { { @@ -159,14 +158,7 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { }; #define OMAP7XX_MCBSP_RES_SZ ARRAY_SIZE(omap7xx_mcbsp_res[1]) #define OMAP7XX_MCBSP_COUNT ARRAY_SIZE(omap7xx_mcbsp_res) -#else -#define omap7xx_mcbsp_res_0 NULL -#define omap7xx_mcbsp_pdata NULL -#define OMAP7XX_MCBSP_RES_SZ 0 -#define OMAP7XX_MCBSP_COUNT 0 -#endif -#ifdef CONFIG_ARCH_OMAP15XX struct resource omap15xx_mcbsp_res[][6] = { { { @@ -266,14 +258,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { }; #define OMAP15XX_MCBSP_RES_SZ ARRAY_SIZE(omap15xx_mcbsp_res[1]) #define OMAP15XX_MCBSP_COUNT ARRAY_SIZE(omap15xx_mcbsp_res) -#else -#define omap15xx_mcbsp_res_0 NULL -#define omap15xx_mcbsp_pdata NULL -#define OMAP15XX_MCBSP_RES_SZ 0 -#define OMAP15XX_MCBSP_COUNT 0 -#endif -#ifdef CONFIG_ARCH_OMAP16XX struct resource omap16xx_mcbsp_res[][6] = { { { @@ -373,12 +358,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { }; #define OMAP16XX_MCBSP_RES_SZ ARRAY_SIZE(omap16xx_mcbsp_res[1]) #define OMAP16XX_MCBSP_COUNT ARRAY_SIZE(omap16xx_mcbsp_res) -#else -#define omap16xx_mcbsp_res_0 NULL -#define omap16xx_mcbsp_pdata NULL -#define OMAP16XX_MCBSP_RES_SZ 0 -#define OMAP16XX_MCBSP_COUNT 0 -#endif static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, struct omap_mcbsp_platform_data *config, int size) diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index d9165709c532..0d1f092821ff 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -106,13 +106,6 @@ #define OMAP7XX_IDLECT3 0xfffece24 #define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 -#if !defined(CONFIG_ARCH_OMAP730) && \ - !defined(CONFIG_ARCH_OMAP850) && \ - !defined(CONFIG_ARCH_OMAP15XX) && \ - !defined(CONFIG_ARCH_OMAP16XX) -#warning "Power management for this processor not implemented yet" -#endif - #ifndef __ASSEMBLER__ #include <linux/clk.h> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index b90d98bae68d..03e25af6f48c 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -45,6 +45,8 @@ config MACH_PXA27X_DT config MACH_PXA3XX_DT bool "Support PXA3xx platforms from device tree" select CPU_PXA300 + select CPU_PXA310 + select CPU_PXA320 select PINCTRL select POWER_SUPPLY select PXA3xx diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts index e3486f60645a..a1f0c38ccadd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts @@ -131,10 +131,6 @@ }; &usb { - phys = <&usb2_phy1>; - phy-names = "usb2-phy1"; -}; - -&usb2_phy0 { - status = "disabled"; + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index 5a8d85a7d161..bbdf989058ff 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -110,7 +110,7 @@ &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 9b726c2a4842..dda27ed7aaf2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -89,7 +89,7 @@ &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index b2fcbba60d3a..3b0ed9305f2b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -88,7 +88,7 @@ &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 41d8b15f25a5..aa52ff73ff9e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -53,7 +53,7 @@ &i2c0 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 1bfbce69cc8b..ee8e932628d1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -136,7 +136,7 @@ &i2c0 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts index ef6c8967533e..d4867d6cf47c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts @@ -245,7 +245,7 @@ &i2c3 { status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9540"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index f598669e742f..52c5a43b30a0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -103,7 +103,7 @@ &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 3d9647b3da14..537cecb13dd0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -44,7 +44,7 @@ &i2c0 { status = "okay"; - pca9547@75 { + i2c-mux@75 { compatible = "nxp,pca9547"; reg = <0x75>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi index afb455210bd0..d32a52ab00a4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -54,7 +54,7 @@ &i2c0 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index 03266bd90a06..169f047fbca5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -120,7 +120,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_espi2>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; eeprom@0 { @@ -316,7 +316,7 @@ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 - MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x41 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts index 24f61db33eba..752f409a30b1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts @@ -275,7 +275,7 @@ compatible = "rohm,bd71847"; reg = <0x4b>; #clock-cells = <0>; - clocks = <&clk_xtal32k 0>; + clocks = <&clk_xtal32k>; clock-output-names = "clk-32k-out"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts index 74c09891600f..6357078185ed 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -214,7 +214,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - i2cmux@70 { + i2c-mux@70 { compatible = "nxp,pca9540"; reg = <0x70>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 750a1f07ecb7..6433c205f8dd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -771,6 +771,7 @@ &usbotg2 { dr_mode = "host"; vbus-supply = <®_usb2_vbus>; + over-current-active-low; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi index c2a5c2f7b204..7c3f5c54f040 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi @@ -9,6 +9,7 @@ simple-audio-card,bitclock-master = <&dailink_master>; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,mclk-fs = <256>; simple-audio-card,name = "imx8mm-wm8904"; simple-audio-card,routing = "Headphone Jack", "HPOUTL", diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi index 73cc3fafa018..b2bcd2282170 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi @@ -11,6 +11,7 @@ simple-audio-card,bitclock-master = <&dailink_master>; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,mclk-fs = <256>; simple-audio-card,name = "imx8mm-nau8822"; simple-audio-card,routing = "Headphones", "LHP", diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index d4c7ca16abd0..f2d93437084b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -36,8 +36,8 @@ pcie0_refclk: pcie0-refclk { compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; + #clock-cells = <0>; + clock-frequency = <100000000>; }; reg_can1_stby: regulator-can1-stby { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index 79b290a002c1..ecc4bce6db97 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -99,7 +99,6 @@ regulators { buck1: BUCK1 { - regulator-compatible = "BUCK1"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <2187500>; regulator-boot-on; @@ -108,7 +107,6 @@ }; buck2: BUCK2 { - regulator-compatible = "BUCK2"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <2187500>; regulator-boot-on; @@ -119,7 +117,6 @@ }; buck4: BUCK4 { - regulator-compatible = "BUCK4"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -127,7 +124,6 @@ }; buck5: BUCK5 { - regulator-compatible = "BUCK5"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -135,7 +131,6 @@ }; buck6: BUCK6 { - regulator-compatible = "BUCK6"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -143,7 +138,6 @@ }; ldo1: LDO1 { - regulator-compatible = "LDO1"; regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -151,7 +145,6 @@ }; ldo2: LDO2 { - regulator-compatible = "LDO2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1150000>; regulator-boot-on; @@ -159,7 +152,6 @@ }; ldo3: LDO3 { - regulator-compatible = "LDO3"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -167,13 +159,11 @@ }; ldo4: LDO4 { - regulator-compatible = "LDO4"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; }; ldo5: LDO5 { - regulator-compatible = "LDO5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 7a6e6221f421..03034b439c1f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -524,6 +524,7 @@ compatible = "fsl,imx8mp-gpc"; reg = <0x303a0000 0x1000>; interrupt-parent = <&gic>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <3>; @@ -590,7 +591,7 @@ reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>; }; - pgc_hsiomix: power-domains@17 { + pgc_hsiomix: power-domain@17 { #power-domain-cells = <0>; reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>; clocks = <&clk IMX8MP_CLK_HSIO_AXI>, @@ -1297,7 +1298,7 @@ reg = <0x32f10100 0x8>, <0x381f0000 0x20>; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "hsio", "suspend"; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; @@ -1310,9 +1311,9 @@ usb_dwc3_0: usb@38100000 { compatible = "snps,dwc3"; reg = <0x38100000 0x10000>; - clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + clocks = <&clk IMX8MP_CLK_USB_ROOT>, <&clk IMX8MP_CLK_USB_CORE_REF>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "bus_early", "ref", "suspend"; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy0>, <&usb3_phy0>; @@ -1339,7 +1340,7 @@ reg = <0x32f10108 0x8>, <0x382f0000 0x20>; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "hsio", "suspend"; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; @@ -1352,9 +1353,9 @@ usb_dwc3_1: usb@38200000 { compatible = "snps,dwc3"; reg = <0x38200000 0x10000>; - clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + clocks = <&clk IMX8MP_CLK_USB_ROOT>, <&clk IMX8MP_CLK_USB_CORE_REF>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "bus_early", "ref", "suspend"; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy1>, <&usb3_phy1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index 9dda2a1554c3..8614c18b5998 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -133,7 +133,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - i2cmux@70 { + i2c-mux@70 { compatible = "nxp,pca9546"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_pca9546>; @@ -216,7 +216,7 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - pca9546: i2cmux@70 { + pca9546: i2c-mux@70 { compatible = "nxp,pca9546"; reg = <0x70>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts index 5d5aa6537225..6e6182709d22 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts @@ -339,7 +339,7 @@ bus-width = <4>; non-removable; no-sd; - no-emmc; + no-mmc; status = "okay"; brcmf: wifi@1 { @@ -359,7 +359,7 @@ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; bus-width = <4>; no-sdio; - no-emmc; + no-mmc; disable-wp; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 07d8dd8160f6..afa883389456 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -61,7 +61,7 @@ pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>; status = "okay"; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9646", "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index 69786c326db0..27f9a9f33134 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -74,7 +74,7 @@ pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe @@ -84,7 +84,7 @@ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe >; }; @@ -102,7 +102,7 @@ pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi index 7308f7b6b22c..8bce64069138 100644 --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi @@ -98,7 +98,7 @@ uart1: serial@12100 { compatible = "snps,dw-apb-uart"; - reg = <0x11000 0x100>; + reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi index 87c90e93667f..79de9cc395c4 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2015, LGE Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com> */ /dts-v1/; @@ -51,6 +52,11 @@ reg = <0 0x03400000 0 0x1200000>; no-map; }; + + removed_region: reserved@5000000 { + reg = <0 0x05000000 0 0x2200000>; + no-map; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index b242c272d2af..fcca1ba94da6 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -11,6 +11,12 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> +/delete-node/ &adsp_mem; +/delete-node/ &audio_mem; +/delete-node/ &mpss_mem; +/delete-node/ &peripheral_region; +/delete-node/ &rmtfs_mem; + / { model = "Xiaomi Mi 4C"; compatible = "xiaomi,libra", "qcom,msm8992"; @@ -70,25 +76,67 @@ #size-cells = <2>; ranges; - /* This is for getting crash logs using Android downstream kernels */ - ramoops@dfc00000 { - compatible = "ramoops"; - reg = <0x0 0xdfc00000 0x0 0x40000>; - console-size = <0x10000>; - record-size = <0x10000>; - ftrace-size = <0x10000>; - pmsg-size = <0x20000>; + memory_hole: hole@6400000 { + reg = <0 0x06400000 0 0x600000>; + no-map; + }; + + memory_hole2: hole2@6c00000 { + reg = <0 0x06c00000 0 0x2400000>; + no-map; + }; + + mpss_mem: mpss@9000000 { + reg = <0 0x09000000 0 0x5a00000>; + no-map; + }; + + tzapp: tzapp@ea00000 { + reg = <0 0x0ea00000 0 0x1900000>; + no-map; + }; + + mdm_rfsa_mem: mdm-rfsa@ca0b0000 { + reg = <0 0xca0b0000 0 0x10000>; + no-map; + }; + + rmtfs_mem: rmtfs@ca100000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xca100000 0 0x180000>; + no-map; + + qcom,client-id = <1>; }; - modem_region: modem_region@9000000 { - reg = <0x0 0x9000000 0x0 0x5a00000>; + audio_mem: audio@cb400000 { + reg = <0 0xcb000000 0 0x400000>; + no-mem; + }; + + qseecom_mem: qseecom@cb400000 { + reg = <0 0xcb400000 0 0x1c00000>; + no-mem; + }; + + adsp_rfsa_mem: adsp-rfsa@cd000000 { + reg = <0 0xcd000000 0 0x10000>; no-map; }; - tzapp: modem_region@ea00000 { - reg = <0x0 0xea00000 0x0 0x1900000>; + sensor_rfsa_mem: sensor-rfsa@cd010000 { + reg = <0 0xcd010000 0 0x10000>; no-map; }; + + ramoops@dfc00000 { + compatible = "ramoops"; + reg = <0 0xdfc00000 0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; }; }; @@ -130,11 +178,6 @@ status = "okay"; }; -&peripheral_region { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; -}; - &pm8994_spmi_regulators { VDD_APC0: s8 { regulator-min-microvolt = <680000>; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 10adb4986ef1..02fc3795dbfd 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -37,10 +37,6 @@ compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc"; }; -&tcsr_mutex { - compatible = "qcom,sfpb-mutex"; -}; - &timer { interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index 85abff0e9b3f..7b0f62144c3e 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -9,9 +9,6 @@ #include "msm8994.dtsi" -/* Angler's firmware does not report where the memory is allocated */ -/delete-node/ &cont_splash_mem; - / { model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; @@ -28,6 +25,22 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tzapp_mem: tzapp@4800000 { + reg = <0 0x04800000 0 0x1900000>; + no-map; + }; + + removed_region: reserved@6300000 { + reg = <0 0x06300000 0 0xD00000>; + no-map; + }; + }; }; &blsp1_uart2 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 109c9d2b684d..71cf81a8eb4d 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/interconnect/qcom,sc8280xp.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -762,7 +763,7 @@ <0>, <0>, <0>, - <&usb_0_ssphy>, + <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>, <0>, <0>, @@ -770,7 +771,7 @@ <0>, <0>, <0>, - <&usb_1_ssphy>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>, <0>, <0>, @@ -1673,42 +1674,26 @@ }; }; - usb_0_qmpphy: phy-wrapper@88ec000 { + usb_0_qmpphy: phy@88eb000 { compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; - reg = <0 0x088ec000 0 0x1e4>, - <0 0x088eb000 0 0x40>, - <0 0x088ed000 0 0x1c8>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088eb000 0 0x4000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB4_EUD_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_PRIM_GDSC>; resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + <&gcc GCC_USB4_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - power-domains = <&gcc USB30_PRIM_GDSC>; + #clock-cells = <1>; + #phy-cells = <1>; status = "disabled"; - - usb_0_ssphy: usb3-phy@88eb400 { - reg = <0 0x088eb400 0 0x100>, - <0 0x088eb600 0 0x3ec>, - <0 0x088ec400 0 0x364>, - <0 0x088eba00 0 0x100>, - <0 0x088ebc00 0 0x3ec>, - <0 0x088ec200 0 0x18>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb0_phy_pipe_clk_src"; - }; }; usb_1_hsphy: phy@8902000 { @@ -1725,42 +1710,26 @@ status = "disabled"; }; - usb_1_qmpphy: phy-wrapper@8904000 { + usb_1_qmpphy: phy@8903000 { compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; - reg = <0 0x08904000 0 0x1e4>, - <0 0x08903000 0 0x40>, - <0 0x08905000 0 0x1c8>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x08903000 0 0x4000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB4_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_SEC_GDSC>; resets = <&gcc GCC_USB3_PHY_SEC_BCR>, <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - power-domains = <&gcc USB30_SEC_GDSC>; + #clock-cells = <1>; + #phy-cells = <1>; status = "disabled"; - - usb_1_ssphy: usb3-phy@8903400 { - reg = <0 0x08903400 0 0x100>, - <0 0x08903600 0 0x3ec>, - <0 0x08904400 0 0x364>, - <0 0x08903a00 0 0x100>, - <0 0x08903c00 0 0x3ec>, - <0 0x08904200 0 0x18>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb1_phy_pipe_clk_src"; - }; }; pmu@9091000 { @@ -1910,7 +1879,7 @@ reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; iommus = <&apps_smmu 0x820 0x0>; - phys = <&usb_0_hsphy>, <&usb_0_ssphy>; + phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -1964,7 +1933,7 @@ reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; iommus = <&apps_smmu 0x860 0x0>; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index dab5579946f3..927032863e2f 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -334,7 +334,6 @@ exit-latency-us = <6562>; min-residency-us = <9987>; local-timer-stop; - status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 245dce24ec59..fb3cd20a82b5 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2382,8 +2382,8 @@ <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; resets = <&gcc GCC_SDCC2_BCR>; - interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>; interconnect-names = "sdhc-ddr","cpu-sdhc"; iommus = <&apps_smmu 0x4a0 0x0>; power-domains = <&rpmhpd SM8350_CX>; diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi index 43bed6c0a84f..5235fd1c9cb6 100644 --- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi +++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi @@ -328,7 +328,7 @@ bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */ <0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */ - <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */ + <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x10000000>, /* mem */ <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */ num-lanes = <0x8>; interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>; |