summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2023-01-10 23:08:59 +0100
committerArnd Bergmann <arnd@arndb.de>2023-01-10 23:08:59 +0100
commit23d39547655e9d4144fce073ee2e9b112e8aedc5 (patch)
tree434d54ff015ae15fa8bde34f5b2df647790548cb /arch
parentMerge tag 'qcom-dts-fixes-for-6.2' of https://git.kernel.org/pub/scm/linux/ke... (diff)
parentarm64: dts: qcom: msm8992-libra: Fix the memory map (diff)
downloadlinux-23d39547655e9d4144fce073ee2e9b112e8aedc5.tar.xz
linux-23d39547655e9d4144fce073ee2e9b112e8aedc5.zip
Merge tag 'qcom-arm64-fixes-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DTS fixes for 6.2 The cluster idle issue was resolved on SM8250, so the change disabling the cluster state is being reverted. Issues where identified with the QMP PHY binding, that would prevent enablement of Displayport and it was decided not to support the old binding for the recently introduced SC8280XP, which broke USB. This adjusts the USB PHY nodes to the new binding. The reset signal for the first QMP PHY is corrected as well. The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus 6P, to avoid instabilities caused by use of protected memory regions. The compatible for the MSM8992 TCSR mutex is corrected as well. Lastly SDHCI interconnects on SM8350 are corrected to match the providers #interconnect-cells. * tag 'qcom-arm64-fixes-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: msm8992-libra: Fix the memory map arm64: dts: qcom: msm8992: Don't use sfpb mutex arm64: dts: msm8994-angler: fix the memory map arm64: dts: qcom: sm8350: correct SDHCI interconnect arguments Revert "arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state" arm64: dts: msm8992-bullhead: add memory hole region arm64: dts: qcom: sc8280xp: fix USB-DP PHY nodes arm64: dts: qcom: sc8280xp: fix primary USB-DP PHY reset Link: https://lore.kernel.org/r/20230110213724.2183668-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi6
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts77
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992.dtsi4
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts19
-rw-r--r--arch/arm64/boot/dts/qcom/sc8280xp.dtsi79
-rw-r--r--arch/arm64/boot/dts/qcom/sm8250.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/sm8350.dtsi4
7 files changed, 108 insertions, 82 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index 87c90e93667f..79de9cc395c4 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
* Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
*/
/dts-v1/;
@@ -51,6 +52,11 @@
reg = <0 0x03400000 0 0x1200000>;
no-map;
};
+
+ removed_region: reserved@5000000 {
+ reg = <0 0x05000000 0 0x2200000>;
+ no-map;
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index b242c272d2af..fcca1ba94da6 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -11,6 +11,12 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+
/ {
model = "Xiaomi Mi 4C";
compatible = "xiaomi,libra", "qcom,msm8992";
@@ -70,25 +76,67 @@
#size-cells = <2>;
ranges;
- /* This is for getting crash logs using Android downstream kernels */
- ramoops@dfc00000 {
- compatible = "ramoops";
- reg = <0x0 0xdfc00000 0x0 0x40000>;
- console-size = <0x10000>;
- record-size = <0x10000>;
- ftrace-size = <0x10000>;
- pmsg-size = <0x20000>;
+ memory_hole: hole@6400000 {
+ reg = <0 0x06400000 0 0x600000>;
+ no-map;
+ };
+
+ memory_hole2: hole2@6c00000 {
+ reg = <0 0x06c00000 0 0x2400000>;
+ no-map;
+ };
+
+ mpss_mem: mpss@9000000 {
+ reg = <0 0x09000000 0 0x5a00000>;
+ no-map;
+ };
+
+ tzapp: tzapp@ea00000 {
+ reg = <0 0x0ea00000 0 0x1900000>;
+ no-map;
+ };
+
+ mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
+ reg = <0 0xca0b0000 0 0x10000>;
+ no-map;
+ };
+
+ rmtfs_mem: rmtfs@ca100000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xca100000 0 0x180000>;
+ no-map;
+
+ qcom,client-id = <1>;
};
- modem_region: modem_region@9000000 {
- reg = <0x0 0x9000000 0x0 0x5a00000>;
+ audio_mem: audio@cb400000 {
+ reg = <0 0xcb000000 0 0x400000>;
+ no-mem;
+ };
+
+ qseecom_mem: qseecom@cb400000 {
+ reg = <0 0xcb400000 0 0x1c00000>;
+ no-mem;
+ };
+
+ adsp_rfsa_mem: adsp-rfsa@cd000000 {
+ reg = <0 0xcd000000 0 0x10000>;
no-map;
};
- tzapp: modem_region@ea00000 {
- reg = <0x0 0xea00000 0x0 0x1900000>;
+ sensor_rfsa_mem: sensor-rfsa@cd010000 {
+ reg = <0 0xcd010000 0 0x10000>;
no-map;
};
+
+ ramoops@dfc00000 {
+ compatible = "ramoops";
+ reg = <0 0xdfc00000 0 0x40000>;
+ console-size = <0x10000>;
+ record-size = <0x10000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x20000>;
+ };
};
};
@@ -130,11 +178,6 @@
status = "okay";
};
-&peripheral_region {
- reg = <0x0 0x7400000 0x0 0x1c00000>;
- no-map;
-};
-
&pm8994_spmi_regulators {
VDD_APC0: s8 {
regulator-min-microvolt = <680000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 10adb4986ef1..02fc3795dbfd 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -37,10 +37,6 @@
compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc";
};
-&tcsr_mutex {
- compatible = "qcom,sfpb-mutex";
-};
-
&timer {
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
index 85abff0e9b3f..7b0f62144c3e 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -9,9 +9,6 @@
#include "msm8994.dtsi"
-/* Angler's firmware does not report where the memory is allocated */
-/delete-node/ &cont_splash_mem;
-
/ {
model = "Huawei Nexus 6P";
compatible = "huawei,angler", "qcom,msm8994";
@@ -28,6 +25,22 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tzapp_mem: tzapp@4800000 {
+ reg = <0 0x04800000 0 0x1900000>;
+ no-map;
+ };
+
+ removed_region: reserved@6300000 {
+ reg = <0 0x06300000 0 0xD00000>;
+ no-map;
+ };
+ };
};
&blsp1_uart2 {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 109c9d2b684d..71cf81a8eb4d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/interconnect/qcom,sc8280xp.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
@@ -762,7 +763,7 @@
<0>,
<0>,
<0>,
- <&usb_0_ssphy>,
+ <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
<0>,
<0>,
<0>,
@@ -770,7 +771,7 @@
<0>,
<0>,
<0>,
- <&usb_1_ssphy>,
+ <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
<0>,
<0>,
<0>,
@@ -1673,42 +1674,26 @@
};
};
- usb_0_qmpphy: phy-wrapper@88ec000 {
+ usb_0_qmpphy: phy@88eb000 {
compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
- reg = <0 0x088ec000 0 0x1e4>,
- <0 0x088eb000 0 0x40>,
- <0 0x088ed000 0 0x1c8>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x088eb000 0 0x4000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB4_EUD_CLKREF_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
- <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ <&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- power-domains = <&gcc USB30_PRIM_GDSC>;
+ #clock-cells = <1>;
+ #phy-cells = <1>;
status = "disabled";
-
- usb_0_ssphy: usb3-phy@88eb400 {
- reg = <0 0x088eb400 0 0x100>,
- <0 0x088eb600 0 0x3ec>,
- <0 0x088ec400 0 0x364>,
- <0 0x088eba00 0 0x100>,
- <0 0x088ebc00 0 0x3ec>,
- <0 0x088ec200 0 0x18>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb0_phy_pipe_clk_src";
- };
};
usb_1_hsphy: phy@8902000 {
@@ -1725,42 +1710,26 @@
status = "disabled";
};
- usb_1_qmpphy: phy-wrapper@8904000 {
+ usb_1_qmpphy: phy@8903000 {
compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
- reg = <0 0x08904000 0 0x1e4>,
- <0 0x08903000 0 0x40>,
- <0 0x08905000 0 0x1c8>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x08903000 0 0x4000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB4_CLKREF_CLK>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
<&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- power-domains = <&gcc USB30_SEC_GDSC>;
+ #clock-cells = <1>;
+ #phy-cells = <1>;
status = "disabled";
-
- usb_1_ssphy: usb3-phy@8903400 {
- reg = <0 0x08903400 0 0x100>,
- <0 0x08903600 0 0x3ec>,
- <0 0x08904400 0 0x364>,
- <0 0x08903a00 0 0x100>,
- <0 0x08903c00 0 0x3ec>,
- <0 0x08904200 0 0x18>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb1_phy_pipe_clk_src";
- };
};
pmu@9091000 {
@@ -1910,7 +1879,7 @@
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x820 0x0>;
- phys = <&usb_0_hsphy>, <&usb_0_ssphy>;
+ phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
};
};
@@ -1964,7 +1933,7 @@
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x860 0x0>;
- phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index dab5579946f3..927032863e2f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -334,7 +334,6 @@
exit-latency-us = <6562>;
min-residency-us = <9987>;
local-timer-stop;
- status = "disabled";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 245dce24ec59..fb3cd20a82b5 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2382,8 +2382,8 @@
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
resets = <&gcc GCC_SDCC2_BCR>;
- interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
- <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+ interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
iommus = <&apps_smmu 0x4a0 0x0>;
power-domains = <&rpmhpd SM8350_CX>;