Merge branch 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/soc

From Barry Song, this adds support for a new SoC from CSR; marco. It's
SMP, uses GIC instead of VIC and in general needs a bit of rework of
the platform code for setup, which this branch contains.

* 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel:
  ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco
  ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures
  ARM: PRIMA2: irq: make prima2 irq can work even we enable GIC for Marco
  ARM: PRIMA2: rtciobg: it is also compatible with marco
  ARM: PRIMA2: rstc: enable the support for Marco
  ARM: PRIMA2: mv timer to timer-prima2 as we will add timer-marco
  ARM: PRIMA2: initialize l2x0 according to mach from DT
  ARM: PRIMA2: enable AUTO_ZRELADDR for SIRF in Kconfig
  ARM: PRIMA2: add CSR SiRFmarco device tree .dts

Signed-off-by: Olof Johansson <olof@lixom.net>

22 files changed, 1580 insertions, 33 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 31fe86d52608..a3ffd1a391a7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -393,6 +393,7 @@ config ARCH_GEMINI
 config ARCH_SIRF
 	bool "CSR SiRF"
 	select ARCH_REQUIRE_GPIOLIB
+	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index bbb0a670cd1a..af3987cb9e4d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -386,6 +386,20 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
+	config DEBUG_SIRFPRIMA2_UART1
+		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
+		depends on ARCH_PRIMA2
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFprimaII devices.
+
+	config DEBUG_SIRFMARCO_UART1
+		bool "Kernel low-level debugging messages via SiRFmarco UART1"
+		depends on ARCH_MARCO
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFmarco devices.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3212573b94e7..b34479014f9e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb \
 	kirkwood-openblocks_a6.dtb
+dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
 	msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
diff --git a/arch/arm/boot/dts/marco-evb.dts b/arch/arm/boot/dts/marco-evb.dts
new file mode 100644
index 000000000000..5130aeacfca5
--- /dev/null
+++ b/arch/arm/boot/dts/marco-evb.dts
@@ -0,0 +1,54 @@
+/*
+ * DTS file for CSR SiRFmarco Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "marco.dtsi"
+
+/ {
+	model = "CSR SiRFmarco Evaluation Board";
+	compatible = "sirf,marco-cb", "sirf,marco";
+
+	memory {
+		reg = <0x40000000 0x60000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart1: uart@cc060000 {
+				status = "okay";
+			};
+			uart2: uart@cc070000 {
+				status = "okay";
+			};
+			i2c0: i2c@cc0e0000 {
+			      status = "okay";
+			      fpga-cpld@4d {
+				      compatible = "sirf,fpga-cpld";
+				      reg = <0x4d>;
+			      };
+			};
+			spi1: spi@cc170000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+				spi@0 {
+					compatible = "spidev";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+			pci-iobg {
+				sd0: sdhci@cd000000 {
+					bus-width = <8>;
+					status = "okay";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi
new file mode 100644
index 000000000000..1579c3491ccd
--- /dev/null
+++ b/arch/arm/boot/dts/marco.dtsi
@@ -0,0 +1,756 @@
+/*
+ * DTS file for CSR SiRFmarco SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+	compatible = "sirf,marco";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0xa0000000>;
+
+		l2-cache-controller@c0030000 {
+			compatible = "sirf,marco-pl310-cache", "arm,pl310-cache";
+			reg = <0xc0030000 0x1000>;
+			interrupts = <0 59 0>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <1 1 1>;
+			arm,filter-ranges = <0x40000000 0x80000000>;
+		};
+
+		gic: interrupt-controller@c0011000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xc0011000 0x1000>,
+			      <0xc0010100 0x0100>;
+		};
+
+		rstc-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc2000000 0xc2000000 0x1000000>;
+
+			reset-controller@c2000000 {
+				compatible = "sirf,marco-rstc";
+				reg = <0xc2000000 0x10000>;
+			};
+		};
+
+		sys-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc3000000 0xc3000000 0x1000000>;
+
+			clock-controller@c3000000 {
+				compatible = "sirf,marco-clkc";
+				reg = <0xc3000000 0x1000>;
+				interrupts = <0 3 0>;
+			};
+
+			rsc-controller@c3010000 {
+				compatible = "sirf,marco-rsc";
+				reg = <0xc3010000 0x1000>;
+			};
+		};
+
+		mem-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc4000000 0xc4000000 0x1000000>;
+
+			memory-controller@c4000000 {
+				compatible = "sirf,marco-memc";
+				reg = <0xc4000000 0x10000>;
+				interrupts = <0 27 0>;
+			};
+		};
+
+		disp-iobg0 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc5000000 0xc5000000 0x1000000>;
+
+			display0@c5000000 {
+				compatible = "sirf,marco-lcd";
+				reg = <0xc5000000 0x10000>;
+				interrupts = <0 30 0>;
+			};
+
+			vpp0@c5010000 {
+				compatible = "sirf,marco-vpp";
+				reg = <0xc5010000 0x10000>;
+				interrupts = <0 31 0>;
+			};
+		};
+
+		disp-iobg1 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc6000000 0xc6000000 0x1000000>;
+
+			display1@c6000000 {
+				compatible = "sirf,marco-lcd";
+				reg = <0xc6000000 0x10000>;
+				interrupts = <0 62 0>;
+			};
+
+			vpp1@c6010000 {
+				compatible = "sirf,marco-vpp";
+				reg = <0xc6010000 0x10000>;
+				interrupts = <0 63 0>;
+			};
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc8000000 0xc8000000 0x1000000>;
+
+			graphics@c8000000 {
+				compatible = "powervr,sgx540";
+				reg = <0xc8000000 0x1000000>;
+				interrupts = <0 6 0>;
+			};
+		};
+
+		multimedia-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc9000000 0xc9000000 0x1000000>;
+
+			multimedia@a0000000 {
+				compatible = "sirf,marco-video-codec";
+				reg = <0xc9000000 0x1000000>;
+				interrupts = <0 5 0>;
+			};
+		};
+
+		dsp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xca000000 0xca000000 0x2000000>;
+
+			dspif@ca000000 {
+				compatible = "sirf,marco-dspif";
+				reg = <0xca000000 0x10000>;
+				interrupts = <0 9 0>;
+			};
+
+			gps@ca010000 {
+				compatible = "sirf,marco-gps";
+				reg = <0xca010000 0x10000>;
+				interrupts = <0 7 0>;
+			};
+
+			dsp@cb000000 {
+				compatible = "sirf,marco-dsp";
+				reg = <0xcb000000 0x1000000>;
+				interrupts = <0 8 0>;
+			};
+		};
+
+		peri-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xcc000000 0xcc000000 0x2000000>;
+
+			timer@cc020000 {
+				compatible = "sirf,marco-tick";
+				reg = <0xcc020000 0x1000>;
+				interrupts = <0 0 0>,
+					   <0 1 0>,
+					   <0 2 0>,
+					   <0 49 0>,
+					   <0 50 0>,
+					   <0 51 0>;
+			};
+
+			nand@cc030000 {
+				compatible = "sirf,marco-nand";
+				reg = <0xcc030000 0x10000>;
+				interrupts = <0 41 0>;
+			};
+
+			audio@cc040000 {
+				compatible = "sirf,marco-audio";
+				reg = <0xcc040000 0x10000>;
+				interrupts = <0 35 0>;
+			};
+
+			uart0: uart@cc050000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc050000 0x1000>;
+				interrupts = <0 17 0>;
+				fifosize = <128>;
+				status = "disabled";
+			};
+
+			uart1: uart@cc060000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc060000 0x1000>;
+				interrupts = <0 18 0>;
+				fifosize = <32>;
+				status = "disabled";
+			};
+
+			uart2: uart@cc070000 {
+				cell-index = <2>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc070000 0x1000>;
+				interrupts = <0 19 0>;
+				fifosize = <128>;
+				status = "disabled";
+			};
+
+			uart3: uart@cc190000 {
+				cell-index = <3>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc190000 0x1000>;
+				interrupts = <0 66 0>;
+				fifosize = <128>;
+				status = "disabled";
+			};
+
+			uart4: uart@cc1a0000 {
+				cell-index = <4>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc1a0000 0x1000>;
+				interrupts = <0 69 0>;
+				fifosize = <128>;
+				status = "disabled";
+			};
+
+			usp0: usp@cc080000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-usp";
+				reg = <0xcc080000 0x10000>;
+				interrupts = <0 20 0>;
+				status = "disabled";
+			};
+
+			usp1: usp@cc090000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-usp";
+				reg = <0xcc090000 0x10000>;
+				interrupts = <0 21 0>;
+				status = "disabled";
+			};
+
+			usp2: usp@cc0a0000 {
+				cell-index = <2>;
+				compatible = "sirf,marco-usp";
+				reg = <0xcc0a0000 0x10000>;
+				interrupts = <0 22 0>;
+				status = "disabled";
+			};
+
+			dmac0: dma-controller@cc0b0000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-dmac";
+				reg = <0xcc0b0000 0x10000>;
+				interrupts = <0 12 0>;
+			};
+
+			dmac1: dma-controller@cc160000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-dmac";
+				reg = <0xcc160000 0x10000>;
+				interrupts = <0 13 0>;
+			};
+
+			vip@cc0c0000 {
+				compatible = "sirf,marco-vip";
+				reg = <0xcc0c0000 0x10000>;
+			};
+
+			spi0: spi@cc0d0000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-spi";
+				reg = <0xcc0d0000 0x10000>;
+				interrupts = <0 15 0>;
+				sirf,spi-num-chipselects = <1>;
+				cs-gpios = <&gpio 0 0>;
+				sirf,spi-dma-rx-channel = <25>;
+				sirf,spi-dma-tx-channel = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@cc170000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-spi";
+				reg = <0xcc170000 0x10000>;
+				interrupts = <0 16 0>;
+				sirf,spi-num-chipselects = <1>;
+				cs-gpios = <&gpio 0 0>;
+				sirf,spi-dma-rx-channel = <12>;
+				sirf,spi-dma-tx-channel = <13>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@cc0e0000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-i2c";
+				reg = <0xcc0e0000 0x10000>;
+				interrupts = <0 24 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@cc0f0000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-i2c";
+				reg = <0xcc0f0000 0x10000>;
+				interrupts = <0 25 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			tsc@cc110000 {
+				compatible = "sirf,marco-tsc";
+				reg = <0xcc110000 0x10000>;
+				interrupts = <0 33 0>;
+			};
+
+			gpio: pinctrl@cc120000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,marco-pinctrl";
+				reg = <0xcc120000 0x10000>;
+				interrupts = <0 43 0>,
+					   <0 44 0>,
+					   <0 45 0>,
+					   <0 46 0>,
+					   <0 47 0>;
+				gpio-controller;
+				interrupt-controller;
+
+				lcd_16pins_a: lcd0_0 {
+					lcd {
+						sirf,pins = "lcd_16bitsgrp";
+						sirf,function = "lcd_16bits";
+					};
+				};
+				lcd_18pins_a: lcd0_1 {
+					lcd {
+						sirf,pins = "lcd_18bitsgrp";
+						sirf,function = "lcd_18bits";
+					};
+				};
+				lcd_24pins_a: lcd0_2 {
+					lcd {
+						sirf,pins = "lcd_24bitsgrp";
+						sirf,function = "lcd_24bits";
+					};
+				};
+				lcdrom_pins_a: lcdrom0_0 {
+					lcd {
+						sirf,pins = "lcdromgrp";
+						sirf,function = "lcdrom";
+					};
+				};
+				uart0_pins_a: uart0_0 {
+					uart {
+						sirf,pins = "uart0grp";
+						sirf,function = "uart0";
+					};
+				};
+				uart1_pins_a: uart1_0 {
+					uart {
+						sirf,pins = "uart1grp";
+						sirf,function = "uart1";
+					};
+				};
+				uart2_pins_a: uart2_0 {
+					uart {
+						sirf,pins = "uart2grp";
+						sirf,function = "uart2";
+					};
+				};
+				uart2_noflow_pins_a: uart2_1 {
+					uart {
+						sirf,pins = "uart2_nostreamctrlgrp";
+						sirf,function = "uart2_nostreamctrl";
+					};
+				};
+				spi0_pins_a: spi0_0 {
+					spi {
+						sirf,pins = "spi0grp";
+						sirf,function = "spi0";
+					};
+				};
+				spi1_pins_a: spi1_0 {
+					spi {
+						sirf,pins = "spi1grp";
+						sirf,function = "spi1";
+					};
+				};
+				i2c0_pins_a: i2c0_0 {
+					i2c {
+						sirf,pins = "i2c0grp";
+						sirf,function = "i2c0";
+					};
+				};
+				i2c1_pins_a: i2c1_0 {
+					i2c {
+						sirf,pins = "i2c1grp";
+						sirf,function = "i2c1";
+					};
+				};
+				pwm0_pins_a: pwm0_0 {
+				        pwm {
+				                sirf,pins = "pwm0grp";
+				                sirf,function = "pwm0";
+				        };
+				};
+				pwm1_pins_a: pwm1_0 {
+				        pwm {
+				                sirf,pins = "pwm1grp";
+				                sirf,function = "pwm1";
+				        };
+				};
+				pwm2_pins_a: pwm2_0 {
+				        pwm {
+				                sirf,pins = "pwm2grp";
+				                sirf,function = "pwm2";
+				        };
+				};
+				pwm3_pins_a: pwm3_0 {
+				        pwm {
+				                sirf,pins = "pwm3grp";
+				                sirf,function = "pwm3";
+				        };
+				};
+				gps_pins_a: gps_0 {
+				        gps {
+				                sirf,pins = "gpsgrp";
+				                sirf,function = "gps";
+				        };
+				};
+				vip_pins_a: vip_0 {
+				        vip {
+				                sirf,pins = "vipgrp";
+				                sirf,function = "vip";
+				        };
+				};
+				sdmmc0_pins_a: sdmmc0_0 {
+				        sdmmc0 {
+				                sirf,pins = "sdmmc0grp";
+				                sirf,function = "sdmmc0";
+				        };
+				};
+				sdmmc1_pins_a: sdmmc1_0 {
+				        sdmmc1 {
+				                sirf,pins = "sdmmc1grp";
+				                sirf,function = "sdmmc1";
+				        };
+				};
+				sdmmc2_pins_a: sdmmc2_0 {
+				        sdmmc2 {
+				                sirf,pins = "sdmmc2grp";
+				                sirf,function = "sdmmc2";
+				        };
+				};
+				sdmmc3_pins_a: sdmmc3_0 {
+				        sdmmc3 {
+				                sirf,pins = "sdmmc3grp";
+				                sirf,function = "sdmmc3";
+				        };
+				};
+				sdmmc4_pins_a: sdmmc4_0 {
+				        sdmmc4 {
+				                sirf,pins = "sdmmc4grp";
+				                sirf,function = "sdmmc4";
+				        };
+				};
+				sdmmc5_pins_a: sdmmc5_0 {
+				        sdmmc5 {
+				                sirf,pins = "sdmmc5grp";
+				                sirf,function = "sdmmc5";
+				        };
+				};
+				i2s_pins_a: i2s_0 {
+				        i2s {
+				                sirf,pins = "i2sgrp";
+				                sirf,function = "i2s";
+				        };
+				};
+				ac97_pins_a: ac97_0 {
+				        ac97 {
+				                sirf,pins = "ac97grp";
+				                sirf,function = "ac97";
+				        };
+				};
+				nand_pins_a: nand_0 {
+				        nand {
+				                sirf,pins = "nandgrp";
+				                sirf,function = "nand";
+				        };
+				};
+				usp0_pins_a: usp0_0 {
+				        usp0 {
+				                sirf,pins = "usp0grp";
+				                sirf,function = "usp0";
+				        };
+				};
+				usp1_pins_a: usp1_0 {
+				        usp1 {
+				                sirf,pins = "usp1grp";
+				                sirf,function = "usp1";
+				        };
+				};
+				usp2_pins_a: usp2_0 {
+				        usp2 {
+				                sirf,pins = "usp2grp";
+				                sirf,function = "usp2";
+				        };
+				};
+				usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 {
+				        usb0_utmi_drvbus {
+				                sirf,pins = "usb0_utmi_drvbusgrp";
+				                sirf,function = "usb0_utmi_drvbus";
+				        };
+				};
+				usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 {
+				        usb1_utmi_drvbus {
+				                sirf,pins = "usb1_utmi_drvbusgrp";
+				                sirf,function = "usb1_utmi_drvbus";
+				        };
+				};
+				warm_rst_pins_a: warm_rst_0 {
+				        warm_rst {
+				                sirf,pins = "warm_rstgrp";
+				                sirf,function = "warm_rst";
+				        };
+				};
+				pulse_count_pins_a: pulse_count_0 {
+				        pulse_count {
+				                sirf,pins = "pulse_countgrp";
+				                sirf,function = "pulse_count";
+				        };
+				};
+				cko0_rst_pins_a: cko0_rst_0 {
+				        cko0_rst {
+				                sirf,pins = "cko0_rstgrp";
+				                sirf,function = "cko0_rst";
+				        };
+				};
+				cko1_rst_pins_a: cko1_rst_0 {
+				        cko1_rst {
+				                sirf,pins = "cko1_rstgrp";
+				                sirf,function = "cko1_rst";
+				        };
+				};
+			};
+
+			pwm@cc130000 {
+				compatible = "sirf,marco-pwm";
+				reg = <0xcc130000 0x10000>;
+			};
+
+			efusesys@cc140000 {
+				compatible = "sirf,marco-efuse";
+				reg = <0xcc140000 0x10000>;
+			};
+
+			pulsec@cc150000 {
+				compatible = "sirf,marco-pulsec";
+				reg = <0xcc150000 0x10000>;
+				interrupts = <0 48 0>;
+			};
+
+			pci-iobg {
+				compatible = "sirf,marco-pciiobg", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0xcd000000 0xcd000000 0x1000000>;
+
+				sd0: sdhci@cd000000 {
+					cell-index = <0>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd000000 0x100000>;
+					interrupts = <0 38 0>;
+					status = "disabled";
+				};
+
+				sd1: sdhci@cd100000 {
+					cell-index = <1>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd100000 0x100000>;
+					interrupts = <0 38 0>;
+					status = "disabled";
+				};
+
+				sd2: sdhci@cd200000 {
+					cell-index = <2>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd200000 0x100000>;
+					interrupts = <0 23 0>;
+					status = "disabled";
+				};
+
+				sd3: sdhci@cd300000 {
+					cell-index = <3>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd300000 0x100000>;
+					interrupts = <0 23 0>;
+					status = "disabled";
+				};
+
+				sd4: sdhci@cd400000 {
+					cell-index = <4>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd400000 0x100000>;
+					interrupts = <0 39 0>;
+					status = "disabled";
+				};
+
+				sd5: sdhci@cd500000 {
+					cell-index = <5>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd500000 0x100000>;
+					interrupts = <0 39 0>;
+					status = "disabled";
+				};
+
+				pci-copy@cd900000 {
+					compatible = "sirf,marco-pcicp";
+					reg = <0xcd900000 0x100000>;
+					interrupts = <0 40 0>;
+				};
+
+				rom-interface@cda00000 {
+					compatible = "sirf,marco-romif";
+					reg = <0xcda00000 0x100000>;
+				};
+			};
+		};
+
+		rtc-iobg {
+			compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xc1000000 0x10000>;
+
+			gpsrtc@1000 {
+				compatible = "sirf,marco-gpsrtc";
+				reg = <0x1000 0x1000>;
+				interrupts = <0 55 0>,
+					   <0 56 0>,
+					   <0 57 0>;
+			};
+
+			sysrtc@2000 {
+				compatible = "sirf,marco-sysrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <0 52 0>,
+					   <0 53 0>,
+					   <0 54 0>;
+			};
+
+			pwrc@3000 {
+				compatible = "sirf,marco-pwrc";
+				reg = <0x3000 0x1000>;
+				interrupts = <0 32 0>;
+			};
+		};
+
+		uus-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xce000000 0xce000000 0x1000000>;
+
+			usb0: usb@ce000000 {
+				compatible = "chipidea,ci13611a-marco";
+				reg = <0xce000000 0x10000>;
+				interrupts = <0 10 0>;
+			};
+
+			usb1: usb@ce010000 {
+				compatible = "chipidea,ci13611a-marco";
+				reg = <0xce010000 0x10000>;
+				interrupts = <0 11 0>;
+			};
+
+			security@ce020000 {
+				compatible = "sirf,marco-security";
+				reg = <0xce020000 0x10000>;
+				interrupts = <0 42 0>;
+			};
+		};
+
+		can-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xd0000000 0xd0000000 0x1000000>;
+
+			can0: can@d0000000 {
+				compatible = "sirf,marco-can";
+				reg = <0xd0000000 0x10000>;
+			};
+
+			can1: can@d0010000 {
+				compatible = "sirf,marco-can";
+				reg = <0xd0010000 0x10000>;
+			};
+		};
+
+		lvds-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xd1000000 0xd1000000 0x1000000>;
+
+			lvds@d1000000 {
+				compatible = "sirf,marco-lvds";
+				reg = <0xd1000000 0x10000>;
+				interrupts = <0 64 0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig
index 6a936c7c078a..002a1ceadceb 100644
--- a/arch/arm/configs/prima2_defconfig
+++ b/arch/arm/configs/prima2_defconfig
@@ -11,6 +11,9 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_ARCH_SIRF=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_KEXEC=y
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 558ccfb8d458..4f7379fe01e2 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -11,6 +11,16 @@ config ARCH_PRIMA2
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
 
+config ARCH_MARCO
+	bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform"
+	default y
+	select ARM_GIC
+	select CPU_V7
+	select HAVE_SMP
+	select SMP_ON_UP
+	help
+          Support for CSR SiRFSoC ARM Cortex A9 Platform
+
 endmenu
 
 config SIRF_IRQ
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
index fc9ce22e2b5a..bfe360cbd177 100644
--- a/arch/arm/mach-prima2/Makefile
+++ b/arch/arm/mach-prima2/Makefile
@@ -1,4 +1,3 @@
-obj-y := timer.o
 obj-y += rstc.o
 obj-y += common.o
 obj-y += rtciobrg.o
@@ -6,3 +5,7 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_CACHE_L2X0) += l2x0.o
 obj-$(CONFIG_SUSPEND) += pm.o sleep.o
 obj-$(CONFIG_SIRF_IRQ) += irq.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)  += hotplug.o
+obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
+obj-$(CONFIG_ARCH_MARCO) += timer-marco.o
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index ed3570e5eb8f..00a65649a7e2 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -8,9 +8,11 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/of_irq.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include "common.h"
@@ -30,6 +32,12 @@ void __init sirfsoc_init_late(void)
 	sirfsoc_pm_init();
 }
 
+static __init void sirfsoc_map_io(void)
+{
+	sirfsoc_map_lluart();
+	sirfsoc_map_scu();
+}
+
 #ifdef CONFIG_ARCH_PRIMA2
 static const char *prima2_dt_match[] __initdata = {
        "sirf,prima2",
@@ -38,9 +46,12 @@ static const char *prima2_dt_match[] __initdata = {
 
 DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
-	.map_io         = sirfsoc_map_lluart,
+	.map_io         = sirfsoc_map_io,
 	.init_irq	= sirfsoc_of_irq_init,
-	.init_time	= sirfsoc_timer_init,
+	.init_time	= sirfsoc_prima2_timer_init,
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+	.handle_irq     = sirfsoc_handle_irq,
+#endif
 	.dma_zone_size	= SZ_256M,
 	.init_machine	= sirfsoc_mach_init,
 	.init_late	= sirfsoc_init_late,
@@ -48,3 +59,33 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	.restart	= sirfsoc_restart,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_ARCH_MARCO
+static const struct of_device_id marco_irq_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ /* sentinel */ }
+};
+
+static void __init marco_init_irq(void)
+{
+	of_irq_init(marco_irq_match);
+}
+
+static const char *marco_dt_match[] __initdata = {
+	"sirf,marco",
+	NULL
+};
+
+DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
+	/* Maintainer: Barry Song <baohua.song@csr.com> */
+	.smp            = smp_ops(sirfsoc_smp_ops),
+	.map_io         = sirfsoc_map_io,
+	.init_irq	= marco_init_irq,
+	.init_time	= sirfsoc_marco_timer_init,
+	.handle_irq     = gic_handle_irq,
+	.init_machine	= sirfsoc_mach_init,
+	.init_late	= sirfsoc_init_late,
+	.dt_compat      = marco_dt_match,
+	.restart	= sirfsoc_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 9c75f124e3cf..b7c26b62e4a7 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -11,12 +11,19 @@
 
 #include <linux/init.h>
 #include <asm/mach/time.h>
+#include <asm/exception.h>
 
-extern void sirfsoc_timer_init(void);
+extern void sirfsoc_prima2_timer_init(void);
+extern void sirfsoc_marco_timer_init(void);
+
+extern struct smp_operations   sirfsoc_smp_ops;
+extern void sirfsoc_secondary_startup(void);
+extern void sirfsoc_cpu_die(unsigned int cpu);
 
 extern void __init sirfsoc_of_irq_init(void);
 extern void __init sirfsoc_of_clk_init(void);
 extern void sirfsoc_restart(char, const char *);
+extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
 
 #ifndef CONFIG_DEBUG_LL
 static inline void sirfsoc_map_lluart(void)  {}
@@ -24,6 +31,12 @@ static inline void sirfsoc_map_lluart(void)  {}
 extern void __init sirfsoc_map_lluart(void);
 #endif
 
+#ifndef CONFIG_SMP
+static inline void sirfsoc_map_scu(void) {}
+#else
+extern void sirfsoc_map_scu(void);
+#endif
+
 #ifdef CONFIG_SUSPEND
 extern int sirfsoc_pm_init(void);
 #else
diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S
new file mode 100644
index 000000000000..6ec19d51a271
--- /dev/null
+++ b/arch/arm/mach-prima2/headsmp.S
@@ -0,0 +1,79 @@
+/*
+ * Entry of the second core for CSR Marco dual-core SMP SoCs
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+/*
+ * Cold boot and hardware reset show different behaviour,
+ * system will be always panic if we warm-reset the board
+ * Here we invalidate L1 of CPU1 to make sure there isn't
+ * uninitialized data written into memory later
+ */
+ENTRY(v7_invalidate_l1)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	ldr	r1, =0x7fff
+	and	r2, r1, r0, lsr #13
+
+	ldr	r1, =0x3ff
+
+	and	r3, r1, r0, lsr #3	@ NumWays - 1
+	add	r2, r2, #1		@ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4	@ SetShift
+
+	clz	r1, r3		@ WayShift
+	add	r4, r3, #1	@ NumWays
+1:	sub	r2, r2, #1	@ NumSets--
+	mov	r3, r4		@ Temp = NumWays
+2:	subs	r3, r3, #1	@ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb
+	isb
+	mov	pc, lr
+ENDPROC(v7_invalidate_l1)
+
+/*
+ * SIRFSOC specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(sirfsoc_secondary_startup)
+	bl v7_invalidate_l1
+        mrc     p15, 0, r0, c0, c0, 5
+        and     r0, r0, #15
+        adr     r4, 1f
+        ldmia   r4, {r5, r6}
+        sub     r4, r4, r5
+        add     r6, r6, r4
+pen:    ldr     r7, [r6]
+        cmp     r7, r0
+        bne     pen
+
+        /*
+         * we've been released from the holding pen: secondary_stack
+         * should now contain the SVC stack for this core
+         */
+        b       secondary_startup
+ENDPROC(sirfsoc_secondary_startup)
+
+        .align
+1:      .long   .
+        .long   pen_release
diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c
new file mode 100644
index 000000000000..97c1ee586442
--- /dev/null
+++ b/arch/arm/mach-prima2/hotplug.c
@@ -0,0 +1,41 @@
+/*
+ * CPU hotplug support for CSR Marco dual-core SMP SoCs
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+	flush_cache_all();
+
+	/* we put the platform to just WFI */
+	for (;;) {
+		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
+			: : : "memory");
+		if (pen_release == cpu_logical_map(cpu)) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+	}
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void sirfsoc_cpu_die(unsigned int cpu)
+{
+	platform_do_lowpower(cpu);
+}
diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h
index f6014a07541f..b778a0f248ed 100644
--- a/arch/arm/mach-prima2/include/mach/irqs.h
+++ b/arch/arm/mach-prima2/include/mach/irqs.h
@@ -10,8 +10,8 @@
 #define __ASM_ARCH_IRQS_H
 
 #define SIRFSOC_INTENAL_IRQ_START  0
-#define SIRFSOC_INTENAL_IRQ_END    59
+#define SIRFSOC_INTENAL_IRQ_END    127
 #define SIRFSOC_GPIO_IRQ_START     (SIRFSOC_INTENAL_IRQ_END + 1)
-#define NR_IRQS	220
+#define NR_IRQS	288
 
 #endif
diff --git a/arch/arm/mach-prima2/include/mach/uart.h b/arch/arm/mach-prima2/include/mach/uart.h
index c98b4d5ac24a..c10510d01a44 100644
--- a/arch/arm/mach-prima2/include/mach/uart.h
+++ b/arch/arm/mach-prima2/include/mach/uart.h
@@ -10,7 +10,13 @@
 #define __MACH_PRIMA2_SIRFSOC_UART_H
 
 /* UART-1: used as serial debug port */
+#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1)
 #define SIRFSOC_UART1_PA_BASE          0xb0060000
+#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1)
+#define SIRFSOC_UART1_PA_BASE          0xcc060000
+#else
+#define SIRFSOC_UART1_PA_BASE          0
+#endif
 #define SIRFSOC_UART1_VA_BASE          SIRFSOC_VA(0x060000)
 #define SIRFSOC_UART1_SIZE		SZ_4K
 
diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h
index 0c898fcf909c..15f3edcfbb47 100644
--- a/arch/arm/mach-prima2/include/mach/uncompress.h
+++ b/arch/arm/mach-prima2/include/mach/uncompress.h
@@ -25,6 +25,9 @@ static __inline__ void putc(char c)
 	 * during kernel decompression, all mappings are flat:
 	 *  virt_addr == phys_addr
 	 */
+	if (!SIRFSOC_UART1_PA_BASE)
+		return;
+
 	while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
 		& SIRFSOC_UART1_TXFIFO_FULL)
 		barrier();
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index 7dee9176e77a..6c0f3e9c43fb 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -9,17 +9,19 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach/irq.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/irqdomain.h>
 #include <linux/syscore_ops.h>
+#include <asm/mach/irq.h>
+#include <asm/exception.h>
+#include <mach/hardware.h>
 
 #define SIRFSOC_INT_RISC_MASK0          0x0018
 #define SIRFSOC_INT_RISC_MASK1          0x001C
 #define SIRFSOC_INT_RISC_LEVEL0         0x0020
 #define SIRFSOC_INT_RISC_LEVEL1         0x0024
+#define SIRFSOC_INIT_IRQ_ID		0x0038
 
 void __iomem *sirfsoc_intc_base;
 
@@ -52,6 +54,16 @@ static __init void sirfsoc_irq_init(void)
 	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
 }
 
+asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat, irqnr;
+
+	irqstat = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INIT_IRQ_ID);
+	irqnr = irqstat & 0xff;
+
+	handle_IRQ(irqnr, regs);
+}
+
 static struct of_device_id intc_ids[]  = {
 	{ .compatible = "sirf,prima2-intc" },
 	{},
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index c99837797d76..cbcbe9cb094c 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -11,19 +11,38 @@
 #include <linux/of.h>
 #include <asm/hardware/cache-l2x0.h>
 
-static struct of_device_id prima2_l2x0_ids[]  = {
-	{ .compatible = "sirf,prima2-pl310-cache" },
+struct l2x0_aux
+{
+	u32 val;
+	u32 mask;
+};
+
+static struct l2x0_aux prima2_l2x0_aux __initconst = {
+	.val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT,
+	.mask =	0,
+};
+
+static struct l2x0_aux marco_l2x0_aux __initconst = {
+	.val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
+		(1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT),
+	.mask = L2X0_AUX_CTRL_MASK,
+};
+
+static struct of_device_id sirf_l2x0_ids[] __initconst = {
+	{ .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, },
+	{ .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, },
 	{},
 };
 
 static int __init sirfsoc_l2x0_init(void)
 {
 	struct device_node *np;
+	const struct l2x0_aux *aux;
 
-	np = of_find_matching_node(NULL, prima2_l2x0_ids);
+	np = of_find_matching_node(NULL, sirf_l2x0_ids);
 	if (np) {
-		pr_info("Initializing prima2 L2 cache\n");
-		return l2x0_of_init(0x40000, 0);
+		aux = of_match_node(sirf_l2x0_ids, np)->data;
+		return l2x0_of_init(aux->val, aux->mask);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c
new file mode 100644
index 000000000000..2395022bc733
--- /dev/null
+++ b/arch/arm/mach-prima2/platsmp.c
@@ -0,0 +1,163 @@
+/*
+ * plat smp support for CSR Marco dual-core SMP SoCs
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/hardware/gic.h>
+#include <mach/map.h>
+
+#include "common.h"
+
+static void __iomem *scu_base;
+static void __iomem *rsc_base;
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static struct map_desc scu_io_desc __initdata = {
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+};
+
+void __init sirfsoc_map_scu(void)
+{
+	unsigned long base;
+
+	/* Get SCU base */
+	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+	scu_io_desc.virtual = SIRFSOC_VA(base);
+	scu_io_desc.pfn = __phys_to_pfn(base);
+	iotable_init(&scu_io_desc, 1);
+
+	scu_base = (void __iomem *)SIRFSOC_VA(base);
+}
+
+static void __cpuinit sirfsoc_secondary_init(unsigned int cpu)
+{
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_secondary_init(0);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+static struct of_device_id rsc_ids[]  = {
+	{ .compatible = "sirf,marco-rsc" },
+	{},
+};
+
+static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, rsc_ids);
+	if (!np)
+		return -ENODEV;
+
+	rsc_base = of_iomap(np, 0);
+	if (!rsc_base)
+		return -ENOMEM;
+
+	/*
+	 * write the address of secondary startup into the sram register
+	 * at offset 0x2C, then write the magic number 0x3CAF5D62 to the
+	 * RSC register at offset 0x28, which is what boot rom code is
+	 * waiting for. This would wake up the secondary core from WFE
+	 */
+#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2C
+	__raw_writel(virt_to_phys(sirfsoc_secondary_startup),
+		rsc_base + SIRFSOC_CPU1_JUMPADDR_OFFSET);
+
+#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x28
+	__raw_writel(0x3CAF5D62,
+		rsc_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET);
+
+	/* make sure write buffer is drained */
+	mb();
+
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu_logical_map(cpu);
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+	/*
+	 * Send the secondary CPU SEV, thereby causing the boot monitor to read
+	 * the JUMPADDR and WAKEMAGIC, and branch to the address found there.
+	 */
+	dsb_sev();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init sirfsoc_smp_init_cpus(void)
+{
+	set_smp_cross_call(gic_raise_softirq);
+}
+
+static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus)
+{
+	scu_enable(scu_base);
+}
+
+struct smp_operations sirfsoc_smp_ops __initdata = {
+        .smp_init_cpus          = sirfsoc_smp_init_cpus,
+        .smp_prepare_cpus       = sirfsoc_smp_prepare_cpus,
+        .smp_secondary_init     = sirfsoc_secondary_init,
+        .smp_boot_secondary     = sirfsoc_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die                = sirfsoc_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index 762adb73ab7c..435019ca0a48 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock);
 
 static struct of_device_id rstc_ids[]  = {
 	{ .compatible = "sirf,prima2-rstc" },
+	{ .compatible = "sirf,marco-rstc" },
 	{},
 };
 
@@ -42,27 +43,37 @@ early_initcall(sirfsoc_of_rstc_init);
 
 int sirfsoc_reset_device(struct device *dev)
 {
-	const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL);
-	unsigned int reset_bit;
+	u32 reset_bit;
 
-	if (!prop)
-		return -ENODEV;
-
-	reset_bit = be32_to_cpup(prop);
+	if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit))
+		return -EINVAL;
 
 	mutex_lock(&rstc_lock);
 
-	/*
-	 * Writing 1 to this bit resets corresponding block. Writing 0 to this
-	 * bit de-asserts reset signal of the corresponding block.
-	 * datasheet doesn't require explicit delay between the set and clear
-	 * of reset bit. it could be shorter if tests pass.
-	 */
-	writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
-		sirfsoc_rstc_base + (reset_bit / 32) * 4);
-	msleep(10);
-	writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
-		sirfsoc_rstc_base + (reset_bit / 32) * 4);
+	if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) {
+		/*
+		 * Writing 1 to this bit resets corresponding block. Writing 0 to this
+		 * bit de-asserts reset signal of the corresponding block.
+		 * datasheet doesn't require explicit delay between the set and clear
+		 * of reset bit. it could be shorter if tests pass.
+		 */
+		writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
+			sirfsoc_rstc_base + (reset_bit / 32) * 4);
+		msleep(10);
+		writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
+			sirfsoc_rstc_base + (reset_bit / 32) * 4);
+	} else {
+		/*
+		 * For MARCO and POLO
+		 * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR
+		 * register de-asserts reset signal of the corresponding block.
+		 * datasheet doesn't require explicit delay between the set and clear
+		 * of reset bit. it could be shorter if tests pass.
+		 */
+		writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8);
+		msleep(10);
+		writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4);
+	}
 
 	mutex_unlock(&rstc_lock);
 
diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c
index 557353602130..9f2da2eec4dc 100644
--- a/arch/arm/mach-prima2/rtciobrg.c
+++ b/arch/arm/mach-prima2/rtciobrg.c
@@ -104,6 +104,7 @@ EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel);
 
 static const struct of_device_id rtciobrg_ids[] = {
 	{ .compatible = "sirf,prima2-rtciobg" },
+	{ .compatible = "sirf,marco-rtciobg" },
 	{}
 };
 
diff --git a/arch/arm/mach-prima2/timer-marco.c b/arch/arm/mach-prima2/timer-marco.c
new file mode 100644
index 000000000000..f4eea2e97eb0
--- /dev/null
+++ b/arch/arm/mach-prima2/timer-marco.c
@@ -0,0 +1,316 @@
+/*
+ * System timer for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <asm/sched_clock.h>
+#include <asm/localtimer.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+
+#define SIRFSOC_TIMER_32COUNTER_0_CTRL			0x0000
+#define SIRFSOC_TIMER_32COUNTER_1_CTRL			0x0004
+#define SIRFSOC_TIMER_MATCH_0				0x0018
+#define SIRFSOC_TIMER_MATCH_1				0x001c
+#define SIRFSOC_TIMER_COUNTER_0				0x0048
+#define SIRFSOC_TIMER_COUNTER_1				0x004c
+#define SIRFSOC_TIMER_INTR_STATUS			0x0060
+#define SIRFSOC_TIMER_WATCHDOG_EN			0x0064
+#define SIRFSOC_TIMER_64COUNTER_CTRL			0x0068
+#define SIRFSOC_TIMER_64COUNTER_LO			0x006c
+#define SIRFSOC_TIMER_64COUNTER_HI			0x0070
+#define SIRFSOC_TIMER_64COUNTER_LOAD_LO			0x0074
+#define SIRFSOC_TIMER_64COUNTER_LOAD_HI			0x0078
+#define SIRFSOC_TIMER_64COUNTER_RLATCHED_LO		0x007c
+#define SIRFSOC_TIMER_64COUNTER_RLATCHED_HI		0x0080
+
+#define SIRFSOC_TIMER_REG_CNT 6
+
+static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = {
+	SIRFSOC_TIMER_WATCHDOG_EN,
+	SIRFSOC_TIMER_32COUNTER_0_CTRL,
+	SIRFSOC_TIMER_32COUNTER_1_CTRL,
+	SIRFSOC_TIMER_64COUNTER_CTRL,
+	SIRFSOC_TIMER_64COUNTER_RLATCHED_LO,
+	SIRFSOC_TIMER_64COUNTER_RLATCHED_HI,
+};
+
+static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT];
+
+static void __iomem *sirfsoc_timer_base;
+static void __init sirfsoc_of_timer_map(void);
+
+/* disable count and interrupt */
+static inline void sirfsoc_timer_count_disable(int idx)
+{
+	writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) & ~0x7,
+		sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx);
+}
+
+/* enable count and interrupt */
+static inline void sirfsoc_timer_count_enable(int idx)
+{
+	writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x7,
+		sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx);
+}
+
+/* timer interrupt handler */
+static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *ce = dev_id;
+	int cpu = smp_processor_id();
+
+	/* clear timer interrupt */
+	writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
+
+	if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
+		sirfsoc_timer_count_disable(cpu);
+
+	ce->event_handler(ce);
+
+	return IRQ_HANDLED;
+}
+
+/* read 64-bit timer counter */
+static cycle_t sirfsoc_timer_read(struct clocksource *cs)
+{
+	u64 cycles;
+
+	writel_relaxed((readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
+			BIT(0)) & ~BIT(1), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
+
+	cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_HI);
+	cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_LO);
+
+	return cycles;
+}
+
+static int sirfsoc_timer_set_next_event(unsigned long delta,
+	struct clock_event_device *ce)
+{
+	int cpu = smp_processor_id();
+
+	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0 +
+		4 * cpu);
+	writel_relaxed(delta, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0 +
+		4 * cpu);
+
+	/* enable the tick */
+	sirfsoc_timer_count_enable(cpu);
+
+	return 0;
+}
+
+static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *ce)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* enable in set_next_event */
+		break;
+	default:
+		break;
+	}
+
+	sirfsoc_timer_count_disable(smp_processor_id());
+}
+
+static void sirfsoc_clocksource_suspend(struct clocksource *cs)
+{
+	int i;
+
+	for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
+		sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
+}
+
+static void sirfsoc_clocksource_resume(struct clocksource *cs)
+{
+	int i;
+
+	for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++)
+		writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
+
+	writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2],
+		sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO);
+	writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1],
+		sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI);
+
+	writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
+		BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
+}
+
+static struct clock_event_device sirfsoc_clockevent = {
+	.name = "sirfsoc_clockevent",
+	.rating = 200,
+	.features = CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = sirfsoc_timer_set_mode,
+	.set_next_event = sirfsoc_timer_set_next_event,
+};
+
+static struct clocksource sirfsoc_clocksource = {
+	.name = "sirfsoc_clocksource",
+	.rating = 200,
+	.mask = CLOCKSOURCE_MASK(64),
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	.read = sirfsoc_timer_read,
+	.suspend = sirfsoc_clocksource_suspend,
+	.resume = sirfsoc_clocksource_resume,
+};
+
+static struct irqaction sirfsoc_timer_irq = {
+	.name = "sirfsoc_timer0",
+	.flags = IRQF_TIMER | IRQF_NOBALANCING,
+	.handler = sirfsoc_timer_interrupt,
+	.dev_id = &sirfsoc_clockevent,
+};
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+static struct irqaction sirfsoc_timer1_irq = {
+	.name = "sirfsoc_timer1",
+	.flags = IRQF_TIMER | IRQF_NOBALANCING,
+	.handler = sirfsoc_timer_interrupt,
+};
+
+static int __cpuinit sirfsoc_local_timer_setup(struct clock_event_device *ce)
+{
+	/* Use existing clock_event for cpu 0 */
+	if (!smp_processor_id())
+		return 0;
+
+	ce->irq = sirfsoc_timer1_irq.irq;
+	ce->name = "local_timer";
+	ce->features = sirfsoc_clockevent.features;
+	ce->rating = sirfsoc_clockevent.rating;
+	ce->set_mode = sirfsoc_timer_set_mode;
+	ce->set_next_event = sirfsoc_timer_set_next_event;
+	ce->shift = sirfsoc_clockevent.shift;
+	ce->mult = sirfsoc_clockevent.mult;
+	ce->max_delta_ns = sirfsoc_clockevent.max_delta_ns;
+	ce->min_delta_ns = sirfsoc_clockevent.min_delta_ns;
+
+	sirfsoc_timer1_irq.dev_id = ce;
+	BUG_ON(setup_irq(ce->irq, &sirfsoc_timer1_irq));
+	irq_set_affinity(sirfsoc_timer1_irq.irq, cpumask_of(1));
+
+	clockevents_register_device(ce);
+	return 0;
+}
+
+static void sirfsoc_local_timer_stop(struct clock_event_device *ce)
+{
+	sirfsoc_timer_count_disable(1);
+
+	remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq);
+}
+
+static struct local_timer_ops sirfsoc_local_timer_ops __cpuinitdata = {
+	.setup	= sirfsoc_local_timer_setup,
+	.stop	= sirfsoc_local_timer_stop,
+};
+#endif /* CONFIG_LOCAL_TIMERS */
+
+static void __init sirfsoc_clockevent_init(void)
+{
+	clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
+
+	sirfsoc_clockevent.max_delta_ns =
+		clockevent_delta2ns(-2, &sirfsoc_clockevent);
+	sirfsoc_clockevent.min_delta_ns =
+		clockevent_delta2ns(2, &sirfsoc_clockevent);
+
+	sirfsoc_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&sirfsoc_clockevent);
+#ifdef CONFIG_LOCAL_TIMERS
+	local_timer_register(&sirfsoc_local_timer_ops);
+#endif
+}
+
+/* initialize the kernel jiffy timer source */
+void __init sirfsoc_marco_timer_init(void)
+{
+	unsigned long rate;
+	u32 timer_div;
+	struct clk *clk;
+
+	/* initialize clocking early, we want to set the OS timer */
+	sirfsoc_of_clk_init();
+
+	/* timer's input clock is io clock */
+	clk = clk_get_sys("io", NULL);
+
+	BUG_ON(IS_ERR(clk));
+	rate = clk_get_rate(clk);
+
+	BUG_ON(rate < CLOCK_TICK_RATE);
+	BUG_ON(rate % CLOCK_TICK_RATE);
+
+	sirfsoc_of_timer_map();
+
+	/* Initialize the timer dividers */
+	timer_div = rate / CLOCK_TICK_RATE - 1;
+	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
+	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
+	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
+
+	/* Initialize timer counters to 0 */
+	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO);
+	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI);
+	writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
+		BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
+	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0);
+	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_1);
+
+	/* Clear all interrupts */
+	writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
+
+	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+
+	BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
+
+	sirfsoc_clockevent_init();
+}
+
+static struct of_device_id timer_ids[] = {
+	{ .compatible = "sirf,marco-tick" },
+	{},
+};
+
+static void __init sirfsoc_of_timer_map(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, timer_ids);
+	if (!np)
+		return;
+	sirfsoc_timer_base = of_iomap(np, 0);
+	if (!sirfsoc_timer_base)
+		panic("unable to map timer cpu registers\n");
+
+	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
+	if (!sirfsoc_timer_irq.irq)
+		panic("No irq passed for timer0 via DT\n");
+
+#ifdef CONFIG_LOCAL_TIMERS
+	sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1);
+	if (!sirfsoc_timer1_irq.irq)
+		panic("No irq passed for timer1 via DT\n");
+#endif
+
+	of_node_put(np);
+}
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer-prima2.c
index a7a2c199c3ea..6da584f8a949 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer-prima2.c
@@ -181,7 +181,7 @@ static void __init sirfsoc_clockevent_init(void)
 }
 
 /* initialize the kernel jiffy timer source */
-void __init sirfsoc_timer_init(void)
+void __init sirfsoc_prima2_timer_init(void)
 {
 	unsigned long rate;
 	struct clk *clk;
@@ -220,14 +220,14 @@ static struct of_device_id timer_ids[] = {
 	{},
 };
 
-void __init sirfsoc_of_timer_map(void)
+static void __init sirfsoc_of_timer_map(void)
 {
 	struct device_node *np;
 	const unsigned int *intspec;
 
 	np = of_find_matching_node(NULL, timer_ids);
 	if (!np)
-		panic("unable to find compatible timer node in dtb\n");
+		return;
 	sirfsoc_timer_base = of_iomap(np, 0);
 	if (!sirfsoc_timer_base)
 		panic("unable to map timer cpu registers\n");