Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Minor overlapping changes in the conflicts.

In the macsec case, the change of the default ID macro
name overlapped with the 64-bit netlink attribute alignment
fixes in net-next.

Signed-off-by: David S. Miller <davem@davemloft.net>

24 files changed, 350 insertions, 145 deletions

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 55ca9c7dcf6a..0467846b4cc3 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -860,7 +860,7 @@
 			ti,no-idle-on-init;
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			gpmc,num-cs = <7>;
 			gpmc,num-waitpins = <2>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 344b861a55a5..ba580a9da390 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -884,7 +884,7 @@
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			clocks = <&l3s_gclk>;
 			clock-names = "fck";
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 0a5fc5d02ce2..4168eb9dd369 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -99,13 +99,6 @@
 		#cooling-cells = <2>;
 	};
 
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&extcon_usb1_pins>;
-	};
-
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -349,12 +342,6 @@
 		>;
 	};
 
-	extcon_usb1_pins: extcon_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
-		>;
-	};
-
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
@@ -706,10 +693,6 @@
 	pinctrl-0 = <&usb1_pins>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
index e0ea6a93a22e..792a64ee0df7 100644
--- a/arch/arm/boot/dts/dm814x-clocks.dtsi
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -4,6 +4,157 @@
  * published by the Free Software Foundation.
  */
 
+&pllss {
+	/*
+	 * See TRM "2.6.10 Connected outputso DPLLS" and
+	 * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
+	 * connected except for hdmi and usb.
+	 */
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
+
+	adpll_sgx_ck: adpll@b0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xb0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50b0.adpll.dcoclkldo",
+				     "481c50b0.adpll.clkout",
+				     "481c50b0.adpll.clkoutldo";
+	};
+
+	adpll_hdvic_ck: adpll@e0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xe0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50e0.adpll.dcoclkldo",
+				     "481c50e0.adpll.clkout",
+				     "481c50e0.adpll.clkoutldo";
+	};
+
+	adpll_l3_ck: adpll@110 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x110 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5110.adpll.dcoclkldo",
+				     "481c5110.adpll.clkout",
+				     "481c5110.adpll.clkoutldo";
+	};
+
+	adpll_isp_ck: adpll@140 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x140 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5140.adpll.dcoclkldo",
+				     "481c5140.adpll.clkout",
+				     "481c5140.adpll.clkoutldo";
+	};
+
+	adpll_dss_ck: adpll@170 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x170 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5170.adpll.dcoclkldo",
+				     "481c5170.adpll.clkout",
+				     "481c5170.adpll.clkoutldo";
+	};
+
+	adpll_video0_ck: adpll@1a0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1a0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51a0.adpll.dcoclkldo",
+				     "481c51a0.adpll.clkout",
+				     "481c51a0.adpll.clkoutldo";
+	};
+
+	adpll_video1_ck: adpll@1d0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1d0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51d0.adpll.dcoclkldo",
+				     "481c51d0.adpll.clkout",
+				     "481c51d0.adpll.clkoutldo";
+	};
+
+	adpll_hdmi_ck: adpll@200 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x200 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5200.adpll.dcoclkldo",
+				     "481c5200.adpll.clkout",
+				     "481c5200.adpll.clkoutldo";
+	};
+
+	adpll_audio_ck: adpll@230 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x230 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5230.adpll.dcoclkldo",
+				     "481c5230.adpll.clkout",
+				     "481c5230.adpll.clkoutldo";
+	};
+
+	adpll_usb_ck: adpll@260 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x260 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5260.adpll.dcoclkldo",
+				     "481c5260.adpll.clkout",
+				     "481c5260.adpll.clkoutldo";
+	};
+
+	adpll_ddr_ck: adpll@290 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x290 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5290.adpll.dcoclkldo",
+				     "481c5290.adpll.clkout",
+				     "481c5290.adpll.clkoutldo";
+	};
+};
+
 &pllss_clocks {
 	timer1_fck: timer1_fck {
 		#clock-cells = <0>;
@@ -23,6 +174,24 @@
 		reg = <0x2e0>;
 	};
 
+	/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&adpll_video0_ck 1
+			  &adpll_video1_ck 1
+			  &adpll_audio_ck 1>;
+		ti,bit-shift = <1>;
+		reg = <0x2e8>;
+	};
+
+	/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
 	sysclk18_ck: sysclk18_ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
@@ -79,37 +248,6 @@
 		compatible = "fixed-clock";
 		clock-frequency = <1000000000>;
 	};
-
-	sysclk4_ck: sysclk4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <222000000>;
-	};
-
-	sysclk6_ck: sysclk6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	sysclk10_ck: sysclk10_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <48000000>;
-	};
-
-        cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <250000000>;
-	};
-
 };
 
 &prcm_clocks {
@@ -138,6 +276,49 @@
 		clock-div = <78125>;
 	};
 
+	/* L4_HS 220 MHz*/
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	/* L4_FWCFG */
+	sysclk5_ck: sysclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	/* L4_LS 110 MHz */
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	sysclk8_ck: sysclk8_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_usb_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		compatible = "ti,divider-clock";
+		reg = <0x324>;
+		ti,max-div = <7>;
+		#clock-cells = <0>;
+		clocks = <&adpll_usb_ck 1>;
+	};
+
 	aud_clkin0_ck: aud_clkin0_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi
index 6f98dc8df9dd..0e49741747ef 100644
--- a/arch/arm/boot/dts/dra62x-clocks.dtsi
+++ b/arch/arm/boot/dts/dra62x-clocks.dtsi
@@ -6,6 +6,32 @@
 
 #include "dm814x-clocks.dtsi"
 
+/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
+&adpll_hdvic_ck {
+	status = "disabled";
+};
+
+&adpll_l3_ck {
+	status = "disabled";
+};
+
+&adpll_dss_ck {
+	status = "disabled";
+};
+
+/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
+&sysclk4_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk5_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk6_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
 /*
  * Compared to dm814x, dra62x has different shifts and more mux options.
  * Please add the extra options for ysclk_14 and 16 if really needed.
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index d0bae06b7eb7..ef2164a99d0f 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -98,12 +98,20 @@
 		clock-frequency = <32768>;
 	};
 
-	sys_32k_ck: sys_32k_ck {
+	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
+	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <610>;
+	};
+
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -2170,4 +2178,12 @@
 		ti,bit-shift = <22>;
 		reg = <0x0558>;
 	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x6c4>;
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ef5330578431..8193139d0d87 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include "skeleton.dtsi"
 
@@ -460,8 +460,6 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
-			dma-names = "tx", "rx";
 		};
 
 		spmi_bus: spmi@fc4cf000 {
@@ -479,16 +477,6 @@
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
-
-		blsp2_dma: dma-controller@f9944000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xf9944000 0x19000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
 	};
 
 	smd {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 0ad71b81d3a2..cc6e28f81fe4 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -661,6 +661,7 @@
 };
 
 &pcie_bus_clk {
+	clock-frequency = <100000000>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6c08314427d6..a9285d9a57cd 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -143,19 +143,11 @@
 };
 
 &pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_d";
 		renesas,function = "scif0";
 	};
 
-	scif_clk_pins: scif_clk {
-		renesas,groups = "scif_clk";
-		renesas,function = "scif_clk";
-	};
-
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -229,11 +221,6 @@
 	status = "okay";
 };
 
-&scif_clk {
-	clock-frequency = <14745600>;
-	status = "okay";
-};
-
 &ether {
 	pinctrl-0 = <&ether_pins &phy1_pins>;
 	pinctrl-names = "default";
@@ -414,6 +401,7 @@
 };
 
 &pcie_bus_clk {
+	clock-frequency = <100000000>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6439f0569fe2..1cd1b6a3a72a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1083,9 +1083,8 @@
 		pcie_bus_clk: pcie_bus_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <100000000>;
+			clock-frequency = <0>;
 			clock-output-names = "pcie_bus";
-			status = "disabled";
 		};
 
 		/* External SCIF clock */
@@ -1094,7 +1093,6 @@
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
-			status = "disabled";
 		};
 
 		/* External USB clock - can be overridden by the board */
@@ -1112,7 +1110,6 @@
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
 			clock-output-names = "can_clk";
-			status = "disabled";
 		};
 
 		/* Special CPG clocks */
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index a5edd7d60266..3d039ef021e0 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -71,6 +71,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
 	if (!pdata)
 		pdata = &default_esdhc_pdata;
 
-	return imx_add_platform_device(data->devid, data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+	return imx_add_platform_device_dmamask(data->devid, data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata),
+			DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
index 7581e036bda6..ef9ed36e8a61 100644
--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -461,7 +461,7 @@ static struct clockdomain ipu_7xx_clkdm = {
 	.cm_inst	  = DRA7XX_CM_CORE_AON_IPU_INST,
 	.clkdm_offs	  = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS,
 	.dep_bit	  = DRA7XX_IPU_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain mpu1_7xx_clkdm = {
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 9821be6dfd5e..49de4dd227be 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -737,7 +737,8 @@ void __init omap5_init_late(void)
 #ifdef CONFIG_SOC_DRA7XX
 void __init dra7xx_init_early(void)
 {
-	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
+	omap2_set_globals_tap(DRA7XX_CLASS,
+			      OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap2_control_base_init();
 	omap4_pm_init_early();
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index f397bd6bd6e3..2c04f2741476 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -274,6 +274,10 @@ static inline void omap5_irq_save_context(void)
  */
 static void irq_save_context(void)
 {
+	/* DRA7 has no SAR to save */
+	if (soc_is_dra7xx())
+		return;
+
 	if (!sar_base)
 		sar_base = omap4_get_sar_ram_base();
 
@@ -290,6 +294,9 @@ static void irq_sar_clear(void)
 {
 	u32 val;
 	u32 offset = SAR_BACKUP_STATUS_OFFSET;
+	/* DRA7 has no SAR to save */
+	if (soc_is_dra7xx())
+		return;
 
 	if (soc_is_omap54xx())
 		offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2dbd3785ee6f..d44e0e2f1106 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -198,7 +198,6 @@ void omap_sram_idle(void)
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
 	int per_going_off;
-	int core_prev_state;
 	u32 sdrc_pwr = 0;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
@@ -278,16 +277,20 @@ void omap_sram_idle(void)
 		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 
 	/* CORE */
-	if (core_next_state < PWRDM_POWER_ON) {
-		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
-		if (core_prev_state == PWRDM_POWER_OFF) {
-			omap3_core_restore_context();
-			omap3_cm_restore_context();
-			omap3_sram_restore_context();
-			omap2_sms_restore_context();
-		}
+	if (core_next_state < PWRDM_POWER_ON &&
+	    pwrdm_read_prev_pwrst(core_pwrdm) == PWRDM_POWER_OFF) {
+		omap3_core_restore_context();
+		omap3_cm_restore_context();
+		omap3_sram_restore_context();
+		omap2_sms_restore_context();
+	} else {
+		/*
+		 * In off-mode resume path above, omap3_core_restore_context
+		 * also handles the INTC autoidle restore done here so limit
+		 * this to non-off mode resume paths so we don't do it twice.
+		 */
+		omap3_intc_resume_idle();
 	}
-	omap3_intc_resume_idle();
 
 	pwrdm_post_transition(NULL);
 
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index ad008e4b0c49..67d79f9c6bad 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -40,8 +40,7 @@ static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
 void __init shmobile_init_delay(void)
 {
 	struct device_node *np, *cpus;
-	bool is_a7_a8_a9 = false;
-	bool is_a15 = false;
+	unsigned int div = 0;
 	bool has_arch_timer = false;
 	u32 max_freq = 0;
 
@@ -55,27 +54,22 @@ void __init shmobile_init_delay(void)
 		if (!of_property_read_u32(np, "clock-frequency", &freq))
 			max_freq = max(max_freq, freq);
 
-		if (of_device_is_compatible(np, "arm,cortex-a8") ||
-		    of_device_is_compatible(np, "arm,cortex-a9")) {
-			is_a7_a8_a9 = true;
-		} else if (of_device_is_compatible(np, "arm,cortex-a7")) {
-			is_a7_a8_a9 = true;
-			has_arch_timer = true;
-		} else if (of_device_is_compatible(np, "arm,cortex-a15")) {
-			is_a15 = true;
+		if (of_device_is_compatible(np, "arm,cortex-a8")) {
+			div = 2;
+		} else if (of_device_is_compatible(np, "arm,cortex-a9")) {
+			div = 1;
+		} else if (of_device_is_compatible(np, "arm,cortex-a7") ||
+			 of_device_is_compatible(np, "arm,cortex-a15")) {
+			div = 1;
 			has_arch_timer = true;
 		}
 	}
 
 	of_node_put(cpus);
 
-	if (!max_freq)
+	if (!max_freq || !div)
 		return;
 
-	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
-		if (is_a7_a8_a9)
-			shmobile_setup_delay_hz(max_freq, 1, 3);
-		else if (is_a15)
-			shmobile_setup_delay_hz(max_freq, 2, 4);
-	}
+	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+		shmobile_setup_delay_hz(max_freq, 1, div);
 }
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
index 727ae5f8c4e7..b0ed44313a5b 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
@@ -70,7 +70,6 @@
 		i2c3 = &i2c3;
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
-		i2c6 = &i2c6;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
index e682a3f52791..651c9d9d2d54 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
@@ -201,15 +201,12 @@
 
 		i2c2: i2c@58782000 {
 			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
+			clock-frequency = <400000>;
 		};
 
 		i2c3: i2c@58783000 {
@@ -227,12 +224,15 @@
 
 		i2c4: i2c@58784000 {
 			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
 			reg = <0x58784000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 45 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
 			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
+			clock-frequency = <100000>;
 		};
 
 		i2c5: i2c@58785000 {
@@ -245,16 +245,6 @@
 			clock-frequency = <400000>;
 		};
 
-		i2c6: i2c@58786000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58786000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 26 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
-		};
-
 		system_bus: system-bus@58c00000 {
 			compatible = "socionext,uniphier-system-bus";
 			status = "disabled";
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 4203d5f257bc..85da0f599cd6 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -588,6 +588,15 @@ set_hcr:
 	msr	vpidr_el2, x0
 	msr	vmpidr_el2, x1
 
+	/*
+	 * When VHE is not in use, early init of EL2 and EL1 needs to be
+	 * done here.
+	 * When VHE _is_ in use, EL1 will not be used in the host and
+	 * requires no configuration, and all non-hyp-specific EL2 setup
+	 * will be done via the _EL1 system register aliases in __cpu_setup.
+	 */
+	cbnz	x2, 1f
+
 	/* sctlr_el1 */
 	mov	x0, #0x0800			// Set/clear RES{1,0} bits
 CPU_BE(	movk	x0, #0x33d0, lsl #16	)	// Set EE and E0E on BE systems
@@ -597,6 +606,7 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 	/* Coprocessor traps. */
 	mov	x0, #0x33ff
 	msr	cptr_el2, x0			// Disable copro. traps to EL2
+1:
 
 #ifdef CONFIG_COMPAT
 	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
@@ -734,7 +744,8 @@ ENDPROC(__secondary_switched)
 
 	.macro	update_early_cpu_boot_status status, tmp1, tmp2
 	mov	\tmp2, #\status
-	str_l	\tmp2, __early_cpu_boot_status, \tmp1
+	adr_l	\tmp1, __early_cpu_boot_status
+	str	\tmp2, [\tmp1]
 	dmb	sy
 	dc	ivac, \tmp1			// Invalidate potentially stale cache line
 	.endm
diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c
index aef3605a8c47..18a71bcd26ee 100644
--- a/arch/arm64/kernel/smp_spin_table.c
+++ b/arch/arm64/kernel/smp_spin_table.c
@@ -52,6 +52,7 @@ static void write_pen_release(u64 val)
 static int smp_spin_table_cpu_init(unsigned int cpu)
 {
 	struct device_node *dn;
+	int ret;
 
 	dn = of_get_cpu_node(cpu, NULL);
 	if (!dn)
@@ -60,15 +61,15 @@ static int smp_spin_table_cpu_init(unsigned int cpu)
 	/*
 	 * Determine the address from which the CPU is polling.
 	 */
-	if (of_property_read_u64(dn, "cpu-release-addr",
-				 &cpu_release_addr[cpu])) {
+	ret = of_property_read_u64(dn, "cpu-release-addr",
+				   &cpu_release_addr[cpu]);
+	if (ret)
 		pr_err("CPU %d: missing or invalid cpu-release-addr property\n",
 		       cpu);
 
-		return -1;
-	}
+	of_node_put(dn);
 
-	return 0;
+	return ret;
 }
 
 static int smp_spin_table_cpu_prepare(unsigned int cpu)
diff --git a/arch/powerpc/include/uapi/asm/cputable.h b/arch/powerpc/include/uapi/asm/cputable.h
index 8dde19962a5b..f63c96cd3608 100644
--- a/arch/powerpc/include/uapi/asm/cputable.h
+++ b/arch/powerpc/include/uapi/asm/cputable.h
@@ -31,6 +31,7 @@
 #define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
 					0x00000040
 
+/* Reserved - do not use		0x00000004 */
 #define PPC_FEATURE_TRUE_LE		0x00000002
 #define PPC_FEATURE_PPC_LE		0x00000001
 
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 7030b035905d..a15fe1d4e84a 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -148,23 +148,25 @@ static struct ibm_pa_feature {
 	unsigned long	cpu_features;	/* CPU_FTR_xxx bit */
 	unsigned long	mmu_features;	/* MMU_FTR_xxx bit */
 	unsigned int	cpu_user_ftrs;	/* PPC_FEATURE_xxx bit */
+	unsigned int	cpu_user_ftrs2;	/* PPC_FEATURE2_xxx bit */
 	unsigned char	pabyte;		/* byte number in ibm,pa-features */
 	unsigned char	pabit;		/* bit number (big-endian) */
 	unsigned char	invert;		/* if 1, pa bit set => clear feature */
 } ibm_pa_features[] __initdata = {
-	{0, 0, PPC_FEATURE_HAS_MMU,	0, 0, 0},
-	{0, 0, PPC_FEATURE_HAS_FPU,	0, 1, 0},
-	{CPU_FTR_CTRL, 0, 0,		0, 3, 0},
-	{CPU_FTR_NOEXECUTE, 0, 0,	0, 6, 0},
-	{CPU_FTR_NODSISRALIGN, 0, 0,	1, 1, 1},
-	{0, MMU_FTR_CI_LARGE_PAGE, 0,	1, 2, 0},
-	{CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
+	{0, 0, PPC_FEATURE_HAS_MMU, 0,		0, 0, 0},
+	{0, 0, PPC_FEATURE_HAS_FPU, 0,		0, 1, 0},
+	{CPU_FTR_CTRL, 0, 0, 0,			0, 3, 0},
+	{CPU_FTR_NOEXECUTE, 0, 0, 0,		0, 6, 0},
+	{CPU_FTR_NODSISRALIGN, 0, 0, 0,		1, 1, 1},
+	{0, MMU_FTR_CI_LARGE_PAGE, 0, 0,		1, 2, 0},
+	{CPU_FTR_REAL_LE, 0, PPC_FEATURE_TRUE_LE, 0, 5, 0, 0},
 	/*
-	 * If the kernel doesn't support TM (ie. CONFIG_PPC_TRANSACTIONAL_MEM=n),
-	 * we don't want to turn on CPU_FTR_TM here, so we use CPU_FTR_TM_COMP
-	 * which is 0 if the kernel doesn't support TM.
+	 * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
+	 * we don't want to turn on TM here, so we use the *_COMP versions
+	 * which are 0 if the kernel doesn't support TM.
 	 */
-	{CPU_FTR_TM_COMP, 0, 0,		22, 0, 0},
+	{CPU_FTR_TM_COMP, 0, 0,
+	 PPC_FEATURE2_HTM_COMP|PPC_FEATURE2_HTM_NOSC_COMP, 22, 0, 0},
 };
 
 static void __init scan_features(unsigned long node, const unsigned char *ftrs,
@@ -195,10 +197,12 @@ static void __init scan_features(unsigned long node, const unsigned char *ftrs,
 		if (bit ^ fp->invert) {
 			cur_cpu_spec->cpu_features |= fp->cpu_features;
 			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+			cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
 			cur_cpu_spec->mmu_features |= fp->mmu_features;
 		} else {
 			cur_cpu_spec->cpu_features &= ~fp->cpu_features;
 			cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+			cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
 			cur_cpu_spec->mmu_features &= ~fp->mmu_features;
 		}
 	}
diff --git a/arch/x86/include/asm/hugetlb.h b/arch/x86/include/asm/hugetlb.h
index f8a29d2c97b0..e6a8613fbfb0 100644
--- a/arch/x86/include/asm/hugetlb.h
+++ b/arch/x86/include/asm/hugetlb.h
@@ -4,6 +4,7 @@
 #include <asm/page.h>
 #include <asm-generic/hugetlb.h>
 
+#define hugepages_supported() cpu_has_pse
 
 static inline int is_hugepage_only_range(struct mm_struct *mm,
 					 unsigned long addr,
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 4e7c6933691c..10c11b4da31d 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -152,6 +152,11 @@ static struct clocksource hyperv_cs = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static unsigned char hv_get_nmi_reason(void)
+{
+	return 0;
+}
+
 static void __init ms_hyperv_init_platform(void)
 {
 	/*
@@ -191,6 +196,13 @@ static void __init ms_hyperv_init_platform(void)
 	machine_ops.crash_shutdown = hv_machine_crash_shutdown;
 #endif
 	mark_tsc_unstable("running on Hyper-V");
+
+	/*
+	 * Generation 2 instances don't support reading the NMI status from
+	 * 0x61 port.
+	 */
+	if (efi_enabled(EFI_BOOT))
+		x86_platform.get_nmi_reason = hv_get_nmi_reason;
 }
 
 const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {