Merge tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.3, 2nd round:

- Fix 'reg' address length for i.MX8MP LCDIF2 device.
- A couple of changes from Fabio Estevam to fix DTC warnings caused
  unnecessary address/size cells.
- Re-enable PCI driver support in imx_v6_v7_defconfig.
- Fix PMIC clock source property for imx8mm-evk board.
- A couple of fixes from Peng Fan to correct off-on delay property for
  i.MX8 Verdin boards.

* tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
  ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
  ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
  arm64: dts: imx8mp-verdin: correct off-on-delay
  arm64: dts: imx8mm-verdin: correct off-on-delay
  arm64: dts: imx8mm-evk: correct pmic clock source
  arm64: dts: imx8mp: fix address length for LCDIF2

Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

8 files changed, 11 insertions, 19 deletions

diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index bf64ba84b358..fde8a19aac0f 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -33,15 +33,9 @@
 		self-powered;
 		type = "micro";
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				usb_dr_connector: endpoint {
-					remote-endpoint = <&usb1_drd_sw>;
-				};
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 8b2f11e85e05..427f8d04ec89 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -118,8 +118,6 @@
 		reg = <0x62>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_epdpmic>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		#thermal-sensor-cells = <0>;
 		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
 
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 6dc6fed12af8..8d002c6e6cb3 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -76,7 +76,7 @@ CONFIG_RFKILL=y
 CONFIG_RFKILL_INPUT=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_IMX6=y
+CONFIG_PCI_IMX6_HOST=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index d1a6390976a9..3f9dfd4d3884 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -194,7 +194,7 @@
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 88321b5b0693..6f0811587142 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -99,7 +99,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
 		regulator-always-on;
@@ -139,7 +139,7 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
index 361426c0da0a..c29622529200 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -10,7 +10,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_ETH";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 0dd6180a8e39..1608775da0ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -87,7 +87,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
 		regulator-always-on;
@@ -128,7 +128,7 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 2dd60e3252f3..a237275ee017 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1128,7 +1128,7 @@
 
 			lcdif2: display-controller@32e90000 {
 				compatible = "fsl,imx8mp-lcdif";
-				reg = <0x32e90000 0x238>;
+				reg = <0x32e90000 0x10000>;
 				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,