ARM: ixp4xx: Delete Omicron boardfiles

These boards are reported obsoleted by the manufacturer and no
known community users exist.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

4 files changed, 0 insertions, 396 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 35ad6201bc7e..4f233c509f6d 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -163,25 +163,6 @@ config MACH_GTWX5715
 		"High Speed" UART is n/c (as far as I can tell)
 		20 Pin ARM/Xscale JTAG interface on J2
 
-config MACH_DEVIXP
-	bool "Omicron DEVIXP"
-	help
-	  Say 'Y' here if you want your kernel to support the DEVIXP
-	  board from OMICRON electronics GmbH.
-
-config MACH_MICCPT
-	bool "Omicron MICCPT"
-	depends on IXP4XX_PCI_LEGACY
-	help
-	  Say 'Y' here if you want your kernel to support the MICCPT
-	  board from OMICRON electronics GmbH.
-
-config MACH_MIC256
-	bool "Omicron MIC256"
-	help
-	  Say 'Y' here if you want your kernel to support the MIC256
-	  board from OMICRON electronics GmbH.
-
 comment "IXP4xx Options"
 
 config IXP4XX_PCI_LEGACY
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 3640115e2db9..4ef8629579ef 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -14,7 +14,6 @@ obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
-obj-pci-$(CONFIG_MACH_MICCPT)		+= miccpt-pci.o
 obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
 obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
 obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
@@ -27,9 +26,6 @@ obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
-obj-$(CONFIG_MACH_DEVIXP)	+= omixp-setup.o
-obj-$(CONFIG_MACH_MICCPT)	+= omixp-setup.o
-obj-$(CONFIG_MACH_MIC256)	+= omixp-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
deleted file mode 100644
index 55a36537ee1a..000000000000
--- a/arch/arm/mach-ixp4xx/miccpt-pci.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/miccpt-pci.c
- *
- * MICCPT board-level PCI initialization
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- * Copyright (C) 2006 OMICRON electronics GmbH
- *
- * Author: Michael Jochum <michael.jochum@omicron.at>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-#define MAX_DEV		4
-#define IRQ_LINES	4
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		1
-#define INTB		2
-#define INTC		3
-#define INTD		4
-
-
-void __init miccpt_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTD)
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % 4];
-
-	return -1;
-}
-
-struct hw_pci miccpt_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= miccpt_pci_preinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= miccpt_map_irq,
-};
-
-int __init miccpt_pci_init(void)
-{
-	if (machine_is_miccpt())
-		pci_common_init(&miccpt_pci);
-	return 0;
-}
-
-subsys_initcall(miccpt_pci_init);
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
deleted file mode 100644
index 8f2b8c473d7a..000000000000
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ /dev/null
@@ -1,298 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/omixp-setup.c
- *
- * omicron ixp4xx board setup
- *      Copyright (C) 2009 OMICRON electronics GmbH
- *
- * based nslu2-setup.c, ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/leds.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include <mach/hardware.h>
-
-#include "irqs.h"
-
-static struct resource omixp_flash_resources[] = {
-	{
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition omixp_partitions[] = {
-	{
-		.name =		"Recovery Bootloader",
-		.size =		0x00020000,
-		.offset =	0,
-	}, {
-		.name =		"Calibration Data",
-		.size =		0x00020000,
-		.offset =	0x00020000,
-	}, {
-		.name =		"Recovery FPGA",
-		.size =		0x00020000,
-		.offset =	0x00040000,
-	}, {
-		.name =		"Release Bootloader",
-		.size =		0x00020000,
-		.offset =	0x00060000,
-	}, {
-		.name =		"Release FPGA",
-		.size =		0x00020000,
-		.offset =	0x00080000,
-	}, {
-		.name =		"Kernel",
-		.size =		0x00160000,
-		.offset =	0x000a0000,
-	}, {
-		.name =		"Filesystem",
-		.size =		0x00C00000,
-		.offset =	0x00200000,
-	}, {
-		.name =		"Persistent Storage",
-		.size =		0x00200000,
-		.offset =	0x00E00000,
-	},
-};
-
-static struct flash_platform_data omixp_flash_data[] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= omixp_partitions,
-		.nr_parts	= ARRAY_SIZE(omixp_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-};
-
-static struct platform_device omixp_flash_device[] = {
-	{
-		.name		= "IXP4XX-Flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &omixp_flash_data[0],
-		},
-		.resource = &omixp_flash_resources[0],
-		.num_resources = 1,
-	}, {
-		.name		= "IXP4XX-Flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &omixp_flash_data[1],
-		},
-		.resource = &omixp_flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-/* Swap UART's - These boards have the console on UART2. The following
- * configuration is used:
- *      ttyS0 .. UART2
- *      ttyS1 .. UART1
- * This way standard images can be used with the kernel that expect
- * the console on ttyS0.
- */
-static struct resource omixp_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct plat_serial8250_port omixp_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	}, {
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	}, {
-		/* list termination */
-	}
-};
-
-static struct platform_device omixp_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= omixp_uart_data,
-	.num_resources		= 2,
-	.resource		= omixp_uart_resources,
-};
-
-static struct gpio_led mic256_led_pins[] = {
-	{
-		.name		= "LED-A",
-		.gpio		= 7,
-	},
-};
-
-static struct gpio_led_platform_data mic256_led_data = {
-	.num_leds		= ARRAY_SIZE(mic256_led_pins),
-	.leds			= mic256_led_pins,
-};
-
-static struct platform_device mic256_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &mic256_led_data,
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource ixp425_npeb_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource ixp425_npec_resources[] = {
-	{
-		.start		= IXP4XX_EthC_BASE_PHYS,
-		.end		= IXP4XX_EthC_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info ixdp425_plat_eth[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}, {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 21,
-	},
-};
-
-static struct platform_device ixdp425_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= ixdp425_plat_eth,
-		.num_resources		= ARRAY_SIZE(ixp425_npeb_resources),
-		.resource		= ixp425_npeb_resources,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev.platform_data	= ixdp425_plat_eth + 1,
-		.num_resources		= ARRAY_SIZE(ixp425_npec_resources),
-		.resource		= ixp425_npec_resources,
-	},
-};
-
-
-static struct platform_device *devixp_pldev[] __initdata = {
-	&omixp_uart,
-	&omixp_flash_device[0],
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static struct platform_device *mic256_pldev[] __initdata = {
-	&omixp_uart,
-	&omixp_flash_device[0],
-	&mic256_leds,
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static struct platform_device *miccpt_pldev[] __initdata = {
-	&omixp_uart,
-	&omixp_flash_device[0],
-	&omixp_flash_device[1],
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static void __init omixp_init(void)
-{
-	ixp4xx_sys_init();
-
-	/* 16MiB Boot Flash */
-	omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
-	omixp_flash_resources[0].end   = IXP4XX_EXP_BUS_END(0);
-
-	/* 32 MiB Data Flash */
-	omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-	omixp_flash_resources[1].end   = IXP4XX_EXP_BUS_END(2);
-
-	if (machine_is_devixp())
-		platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
-	else if (machine_is_miccpt())
-		platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
-	else if (machine_is_mic256())
-		platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
-}
-
-#ifdef CONFIG_MACH_DEVIXP
-MACHINE_START(DEVIXP, "Omicron DEVIXP")
-	.atag_offset    = 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.init_machine	= omixp_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICCPT
-MACHINE_START(MICCPT, "Omicron MICCPT")
-	.atag_offset    = 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.init_machine	= omixp_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MIC256
-MACHINE_START(MIC256, "Omicron MIC256")
-	.atag_offset    = 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.init_machine	= omixp_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif