KVM: PPC: Book3S HV: Keep XIVE escalation interrupt masked unless ceded

This works on top of the single escalation support. When in single
escalation, with this change, we will keep the escalation interrupt
disabled unless the VCPU is in H_CEDE (idle). In any other case, we
know the VCPU will be rescheduled and thus there is no need to take
escalation interrupts in the host whenever a guest interrupt fires.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

4 files changed, 97 insertions, 1 deletions

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 0c44fa67608d..fef8133becc8 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -740,7 +740,10 @@ struct kvm_vcpu_arch {
 	struct kvmppc_xive_vcpu *xive_vcpu; /* XIVE virtual CPU data */
 	__be32 xive_cam_word;    /* Cooked W2 in proper endian with valid bit */
 	u8 xive_pushed;		 /* Is the VP pushed on the physical CPU ? */
+	u8 xive_esc_on;		 /* Is the escalation irq enabled ? */
 	union xive_tma_w01 xive_saved_state; /* W0..1 of XIVE thread state */
+	u64 xive_esc_raddr;	 /* Escalation interrupt ESB real addr */
+	u64 xive_esc_vaddr;	 /* Escalation interrupt ESB virt addr */
 #endif
 
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 825089cf3e23..1672dffd94e2 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -734,6 +734,9 @@ int main(void)
 	DEFINE(VCPU_XIVE_CAM_WORD, offsetof(struct kvm_vcpu,
 					    arch.xive_cam_word));
 	DEFINE(VCPU_XIVE_PUSHED, offsetof(struct kvm_vcpu, arch.xive_pushed));
+	DEFINE(VCPU_XIVE_ESC_ON, offsetof(struct kvm_vcpu, arch.xive_esc_on));
+	DEFINE(VCPU_XIVE_ESC_RADDR, offsetof(struct kvm_vcpu, arch.xive_esc_raddr));
+	DEFINE(VCPU_XIVE_ESC_VADDR, offsetof(struct kvm_vcpu, arch.xive_esc_vaddr));
 #endif
 
 #ifdef CONFIG_KVM_EXIT_TIMING
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index a7f429bc6de0..a7a20b85d8eb 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1045,6 +1045,41 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
 	 */
 	li	r0,0
 	stb	r0, VCPU_IRQ_PENDING(r4)
+
+	/*
+	 * In single escalation mode, if the escalation interrupt is
+	 * on, we mask it.
+	 */
+	lbz	r0, VCPU_XIVE_ESC_ON(r4)
+	cmpwi	r0,0
+	beq	1f
+	ld	r10, VCPU_XIVE_ESC_RADDR(r4)
+	li	r9, XIVE_ESB_SET_PQ_01
+	ldcix	r0, r10, r9
+	sync
+
+	/* We have a possible subtle race here: The escalation interrupt might
+	 * have fired and be on its way to the host queue while we mask it,
+	 * and if we unmask it early enough (re-cede right away), there is
+	 * a theorical possibility that it fires again, thus landing in the
+	 * target queue more than once which is a big no-no.
+	 *
+	 * Fortunately, solving this is rather easy. If the above load setting
+	 * PQ to 01 returns a previous value where P is set, then we know the
+	 * escalation interrupt is somewhere on its way to the host. In that
+	 * case we simply don't clear the xive_esc_on flag below. It will be
+	 * eventually cleared by the handler for the escalation interrupt.
+	 *
+	 * Then, when doing a cede, we check that flag again before re-enabling
+	 * the escalation interrupt, and if set, we abort the cede.
+	 */
+	andi.	r0, r0, XIVE_ESB_VAL_P
+	bne-	1f
+
+	/* Now P is 0, we can clear the flag */
+	li	r0, 0
+	stb	r0, VCPU_XIVE_ESC_ON(r4)
+1:
 no_xive:
 #endif /* CONFIG_KVM_XICS */
 
@@ -2756,7 +2791,32 @@ kvm_cede_prodded:
 	/* we've ceded but we want to give control to the host */
 kvm_cede_exit:
 	ld	r9, HSTATE_KVM_VCPU(r13)
-	b	guest_exit_cont
+#ifdef CONFIG_KVM_XICS
+	/* Abort if we still have a pending escalation */
+	lbz	r5, VCPU_XIVE_ESC_ON(r9)
+	cmpwi	r5, 0
+	beq	1f
+	li	r0, 0
+	stb	r0, VCPU_CEDED(r9)
+1:	/* Enable XIVE escalation */
+	li	r5, XIVE_ESB_SET_PQ_00
+	mfmsr	r0
+	andi.	r0, r0, MSR_DR		/* in real mode? */
+	beq	1f
+	ld	r10, VCPU_XIVE_ESC_VADDR(r9)
+	cmpdi	r10, 0
+	beq	3f
+	ldx	r0, r10, r5
+	b	2f
+1:	ld	r10, VCPU_XIVE_ESC_RADDR(r9)
+	cmpdi	r10, 0
+	beq	3f
+	ldcix	r0, r10, r5
+2:	sync
+	li	r0, 1
+	stb	r0, VCPU_XIVE_ESC_ON(r9)
+#endif /* CONFIG_KVM_XICS */
+3:	b	guest_exit_cont
 
 	/* Try to handle a machine check in real mode */
 machine_check_realmode:
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index eef9ccafdc09..7a047bc88f11 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -89,6 +89,17 @@ static irqreturn_t xive_esc_irq(int irq, void *data)
 	if (vcpu->arch.ceded)
 		kvmppc_fast_vcpu_kick(vcpu);
 
+	/* Since we have the no-EOI flag, the interrupt is effectively
+	 * disabled now. Clearing xive_esc_on means we won't bother
+	 * doing so on the next entry.
+	 *
+	 * This also allows the entry code to know that if a PQ combination
+	 * of 10 is observed while xive_esc_on is true, it means the queue
+	 * contains an unprocessed escalation interrupt. We don't make use of
+	 * that knowledge today but might (see comment in book3s_hv_rmhandler.S)
+	 */
+	vcpu->arch.xive_esc_on = false;
+
 	return IRQ_HANDLED;
 }
 
@@ -134,6 +145,25 @@ static int xive_attach_escalation(struct kvm_vcpu *vcpu, u8 prio)
 		goto error;
 	}
 	xc->esc_virq_names[prio] = name;
+
+	/* In single escalation mode, we grab the ESB MMIO of the
+	 * interrupt and mask it. Also populate the VCPU v/raddr
+	 * of the ESB page for use by asm entry/exit code. Finally
+	 * set the XIVE_IRQ_NO_EOI flag which will prevent the
+	 * core code from performing an EOI on the escalation
+	 * interrupt, thus leaving it effectively masked after
+	 * it fires once.
+	 */
+	if (xc->xive->single_escalation) {
+		struct irq_data *d = irq_get_irq_data(xc->esc_virq[prio]);
+		struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+
+		xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_01);
+		vcpu->arch.xive_esc_raddr = xd->eoi_page;
+		vcpu->arch.xive_esc_vaddr = (__force u64)xd->eoi_mmio;
+		xd->flags |= XIVE_IRQ_NO_EOI;
+	}
+
 	return 0;
 error:
 	irq_dispose_mapping(xc->esc_virq[prio]);