diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-03-20 22:57:08 +0100 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-03-20 22:57:08 +0100 |
| commit | 33b3d2e88c9efd701b6153ca4714d4aa6e9f5af0 (patch) | |
| tree | 7a3bf34e08e6c7b32e0d5c9333b02a02e3af6330 /arch | |
| parent | Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/a... (diff) | |
| parent | ARM: uniphier: rework SMP code to support new System Bus binding (diff) | |
| download | linux-33b3d2e88c9efd701b6153ca4714d4aa6e9f5af0.tar.xz linux-33b3d2e88c9efd701b6153ca4714d4aa6e9f5af0.zip | |
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"Newly added support for additional SoCs:
- Axis Artpec-6 SoC family
- Allwinner A83T SoC
- Mediatek MT7623
- NXP i.MX6QP SoC
- ST Microelectronics stm32f469 microcontroller
New features:
- SMP support for Mediatek mt2701
- Big-endian support for NXP i.MX
- DaVinci now uses the new DMA engine dma_slave_map
- OMAP now uses the new DMA engine dma_slave_map
- earlyprintk support for palmchip uart on mach-tango
- delay timer support for orion
Other:
- Exynos PMU driver moved out to drivers/soc/
- Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
uniphier"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
ARM: uniphier: rework SMP code to support new System Bus binding
ARM: uniphier: add missing of_node_put()
ARM: at91: avoid defining CONFIG_* symbols in source code
ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
ARM: imx: Make reset_control_ops const
ARM: imx: Do L2 errata only if the L2 cache isn't enabled
ARM: imx: select ARM_CPU_SUSPEND only for imx6
dmaengine: pxa_dma: fix the maximum requestor line
ARM: alpine: select the Alpine MSI controller driver
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
dma: mmp_pdma: Add the #dma-requests DT property documentation
ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
ARM: s3c24xx: Avoid warning for inb/outb
ARM: zynq: Move early printk virtual address to vmalloc area
ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
ARM: SAMSUNG: Remove unused register offset definition
ARM: EXYNOS: Cleanup header files inclusion
drivers: soc: samsung: Enable COMPILE_TEST
MAINTAINERS: Add maintainers entry for drivers/soc/samsung
...
Diffstat (limited to 'arch')
104 files changed, 894 insertions, 2017 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c18357f4a01a..cdfa6c2b7626 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -547,6 +547,7 @@ config ARCH_PXA select CLKSRC_PXA select CLKSRC_MMIO select CLKSRC_OF + select CPU_XSCALE if !CPU_XSC3 select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE @@ -724,6 +725,8 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-alpine/Kconfig" +source "arch/arm/mach-artpec/Kconfig" + source "arch/arm/mach-asm9260/Kconfig" source "arch/arm/mach-at91/Kconfig" @@ -879,10 +882,16 @@ config ARCH_STM32 select ARCH_HAS_RESET_CONTROLLER select ARMV7M_SYSTICK select CLKSRC_STM32 + select PINCTRL select RESET_CONTROLLER help Support for STMicroelectronics STM32 processors. +config MACH_STM32F429 + bool "STMicrolectronics STM32F429" + depends on ARCH_STM32 + default y + # Definitions to make life easier config ARCH_ACORN bool diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index c6b6175d0203..1098e91d6d3f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1368,6 +1368,7 @@ config DEBUG_SIRFSOC_UART config DEBUG_LL_INCLUDE string default "debug/sa1100.S" if DEBUG_SA1100 + default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/at91.S" if DEBUG_AT91_UART default "debug/asm9260.S" if DEBUG_ASM9260_UART @@ -1656,6 +1657,14 @@ config DEBUG_UART_8250_WORD DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ DEBUG_BRCMSTB_UART +config DEBUG_UART_8250_PALMCHIP + bool "8250 UART is Palmchip BK-310x" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + help + Palmchip provides a UART implementation compatible with 16550 + except for having a different register layout. Say Y here if + the debug UART is of this type. + config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 46fb1cac2698..8c3ce2ac44c4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -154,6 +154,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_ALPINE) += alpine +machine-$(CONFIG_ARCH_ARTPEC) += artpec machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_AXXIA) += axxia machine-$(CONFIG_ARCH_BCM) += bcm diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 7f68a1ee7073..210192c38df3 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -13,6 +13,7 @@ interrupts = <25>; #dma-channels = <32>; #dma-cells = <2>; + #dma-requests = <75>; status = "okay"; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index cf6998a0804d..bea454f50ff9 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -12,6 +12,7 @@ interrupts = <25>; #dma-channels = <32>; #dma-cells = <2>; + #dma-requests = <100>; status = "okay"; }; diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 0cb724b5c639..dc5517eaf09f 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -378,6 +378,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_GPIO_MAX7301=m +CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=m CONFIG_BATTERY_SBS=m diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 43243be94cfc..d4ae3b8e2426 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -15,7 +15,7 @@ #define AT91_IO_P2V(x) (x) #endif -#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS) +#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS) #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ @@ -24,7 +24,7 @@ .macro addruart, rp, rv, tmp ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address) - ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address) + ldr \rv, =AT91_DEBUG_UART_VIRT @ System peripherals (virt address) .endm .macro senduart,rd,rx diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S index 619d8cc1ac12..92c44760d656 100644 --- a/arch/arm/include/debug/imx.S +++ b/arch/arm/include/debug/imx.S @@ -11,6 +11,7 @@ * */ +#include <asm/assembler.h> #include "imx-uart.h" /* @@ -34,6 +35,7 @@ .endm .macro senduart,rd,rx + ARM_BE8(rev \rd, \rd) str \rd, [\rx, #0x40] @ TXDATA .endm @@ -42,6 +44,7 @@ .macro busyuart,rd,rx 1002: ldr \rd, [\rx, #0x98] @ SR2 + ARM_BE8(rev \rd, \rd) tst \rd, #1 << 3 @ TXDC beq 1002b @ wait until transmit done .endm diff --git a/arch/arm/include/debug/palmchip.S b/arch/arm/include/debug/palmchip.S new file mode 100644 index 000000000000..6824b2d1c38e --- /dev/null +++ b/arch/arm/include/debug/palmchip.S @@ -0,0 +1,11 @@ +#include <linux/serial_reg.h> + +#undef UART_TX +#undef UART_LSR +#undef UART_MSR + +#define UART_TX 1 +#define UART_LSR 7 +#define UART_MSR 8 + +#include <debug/8250.S> diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S index de86b9247564..060cb5b49bfd 100644 --- a/arch/arm/include/debug/zynq.S +++ b/arch/arm/include/debug/zynq.S @@ -20,9 +20,9 @@ #define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ #define UART0_PHYS 0xE0000000 -#define UART0_VIRT 0xF0000000 +#define UART0_VIRT 0xF0800000 #define UART1_PHYS 0xE0001000 -#define UART1_VIRT 0xF0001000 +#define UART1_VIRT 0xF0801000 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) # define LL_UART_PADDR UART1_PHYS diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig index 5c2d54f59f53..b41838a58ae4 100644 --- a/arch/arm/mach-alpine/Kconfig +++ b/arch/arm/mach-alpine/Kconfig @@ -1,6 +1,7 @@ config ARCH_ALPINE bool "Annapurna Labs Alpine platform" depends on ARCH_MULTI_V7 + select ALPINE_MSI select ARM_AMBA select ARM_GIC select GENERIC_IRQ_CHIP diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig new file mode 100644 index 000000000000..6cbe5a2eabab --- /dev/null +++ b/arch/arm/mach-artpec/Kconfig @@ -0,0 +1,20 @@ +menuconfig ARCH_ARTPEC + bool "Axis Communications ARM based ARTPEC SoCs" + depends on ARCH_MULTI_V7 + +if ARCH_ARTPEC + +config MACH_ARTPEC6 + bool "Axis ARTPEC-6 ARM Cortex A9 Platform" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + help + Support for Axis ARTPEC-6 ARM Cortex A9 Platform + +endif diff --git a/arch/arm/mach-artpec/Makefile b/arch/arm/mach-artpec/Makefile new file mode 100644 index 000000000000..78325f0c859c --- /dev/null +++ b/arch/arm/mach-artpec/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MACH_ARTPEC6) := board-artpec6.o diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c new file mode 100644 index 000000000000..71513df3374e --- /dev/null +++ b/arch/arm/mach-artpec/board-artpec6.c @@ -0,0 +1,72 @@ +/* + * ARTPEC-6 device support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/amba/bus.h> +#include <linux/clocksource.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/mfd/syscon.h> +#include <linux/of_platform.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <linux/smp.h> +#include <asm/smp_scu.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/psci.h> +#include <linux/arm-smccc.h> + + +#define ARTPEC6_DMACFG_REGNUM 0x10 +#define ARTPEC6_DMACFG_UARTS_BURST 0xff + +#define SECURE_OP_L2C_WRITEREG 0xb4000001 + +static void __init artpec6_init_machine(void) +{ + struct regmap *regmap; + + regmap = syscon_regmap_lookup_by_compatible("axis,artpec6-syscon"); + + if (!IS_ERR(regmap)) { + /* Use PL011 DMA Burst Request signal instead of DMA + * Single Request + */ + regmap_write(regmap, ARTPEC6_DMACFG_REGNUM, + ARTPEC6_DMACFG_UARTS_BURST); + }; + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg) +{ + struct arm_smccc_res res; + + arm_smccc_smc(SECURE_OP_L2C_WRITEREG, reg, val, 0, + 0, 0, 0, 0, &res); + + WARN_ON(res.a0); +} + +static const char * const artpec6_dt_match[] = { + "axis,artpec6", + NULL +}; + +DT_MACHINE_START(ARTPEC6, "Axis ARTPEC-6 Platform") + .l2c_aux_val = 0x0C000000, + .l2c_aux_mask = 0xF3FFFFFF, + .l2c_write_sec = artpec6_l2c310_write_sec, + .init_machine = artpec6_init_machine, + .dt_compat = artpec6_dt_match, +MACHINE_END diff --git a/arch/arm/mach-bcm/bcm63xx_pmb.c b/arch/arm/mach-bcm/bcm63xx_pmb.c index de061ec5a479..41dcf5d65630 100644 --- a/arch/arm/mach-bcm/bcm63xx_pmb.c +++ b/arch/arm/mach-bcm/bcm63xx_pmb.c @@ -92,7 +92,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn, unsigned int *cpu, unsigned int *addr) { - struct device_node *pmb_dn; struct of_phandle_args args; int ret; @@ -109,7 +108,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn, return ret; } - pmb_dn = args.np; if (args.args_count != 2) { pr_err("reset-controller does not conform to reset-cells\n"); return -EINVAL; diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 575defcc53f9..cfae9c71fb74 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -283,7 +283,7 @@ static const struct smp_operations bcm_smp_ops __initconst = { CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method", &bcm_smp_ops); -struct smp_operations nsp_smp_ops __initdata = { +static const struct smp_operations nsp_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, .smp_boot_secondary = nsp_boot_secondary, }; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index e88b7a5cde99..725e693639d2 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -17,6 +17,7 @@ #include <linux/ahci_platform.h> #include <linux/clk.h> #include <linux/reboot.h> +#include <linux/dmaengine.h> #include <mach/cputype.h> #include <mach/common.h> @@ -233,16 +234,54 @@ static const struct platform_device_info da850_edma1_device __initconst = { .size_data = sizeof(da850_edma1_pdata), }; +static const struct dma_slave_map da830_edma_map[] = { + { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, + { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, + { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, + { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, + { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, + { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, +}; + int __init da830_register_edma(struct edma_rsv_info *rsv) { struct platform_device *edma_pdev; da8xx_edma0_pdata.rsv = rsv; + da8xx_edma0_pdata.slave_map = da830_edma_map; + da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } +static const struct dma_slave_map da850_edma0_map[] = { + { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, + { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, + { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 4) }, + { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 5) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, + { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, + { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, +}; + +static const struct dma_slave_map da850_edma1_map[] = { + { "da830-mmc.1", "rx", EDMA_FILTER_PARAM(1, 28) }, + { "da830-mmc.1", "tx", EDMA_FILTER_PARAM(1, 29) }, +}; + int __init da850_register_edma(struct edma_rsv_info *rsv[2]) { struct platform_device *edma_pdev; @@ -252,11 +291,18 @@ int __init da850_register_edma(struct edma_rsv_info *rsv[2]) da850_edma1_pdata.rsv = rsv[1]; } + da8xx_edma0_pdata.slave_map = da850_edma0_map; + da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da850_edma0_map); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); if (IS_ERR(edma_pdev)) { pr_warn("%s: Failed to register eDMA0\n", __func__); return PTR_ERR(edma_pdev); } + + da850_edma1_pdata.slave_map = da850_edma1_map; + da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map); + edma_pdev = platform_device_register_full(&da850_edma1_device); return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index c7c1458df23c..a0ecf499c2f2 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,6 +13,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/spi/spi.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> @@ -576,9 +577,28 @@ static s8 queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm355_edma_map[] = { + { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) }, + { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) }, + { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) }, + { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) }, + { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, + { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, + { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) }, + { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) }, +}; + static struct edma_soc_info dm355_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, + .slave_map = dm355_edma_map, + .slavecnt = ARRAY_SIZE(dm355_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 01843fbcc9ea..384d3674dd9b 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -17,6 +17,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/spi/spi.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> @@ -862,9 +863,30 @@ static s8 dm365_queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm365_edma_map[] = { + { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) }, + { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) }, + { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) }, + { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) }, + { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) }, + { "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) }, + { "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) }, + { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, + { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, + { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) }, + { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) }, +}; + static struct edma_soc_info dm365_edma_pdata = { .queue_priority_mapping = dm365_queue_priority_mapping, .default_queue = EVENTQ_3, + .slave_map = dm365_edma_map, + .slavecnt = ARRAY_SIZE(dm365_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index b28071ae3a57..b4b3a8b9ca20 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> +#include <linux/dmaengine.h> #include <linux/platform_device.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> @@ -505,9 +506,20 @@ static s8 queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm644x_edma_map[] = { + { "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) }, + { "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) }, + { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) }, + { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, + { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, +}; + static struct edma_soc_info dm644x_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, + .slave_map = dm644x_edma_map, + .slavecnt = ARRAY_SIZE(dm644x_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index cf80786e2471..a43db0f5fbaa 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -9,6 +9,7 @@ * or implied. */ #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -540,9 +541,19 @@ static s8 dm646x_queue_priority_mapping[][2] = { {-1, -1}, }; +static const struct dma_slave_map dm646x_edma_map[] = { + { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) }, + { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) }, + { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) }, + { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) }, + { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) }, +}; + static struct edma_soc_info dm646x_edma_pdata = { .queue_priority_mapping = dm646x_queue_priority_mapping, .default_queue = EVENTQ_1, + .slave_map = dm646x_edma_map, + .slavecnt = ARRAY_SIZE(dm646x_edma_map), }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 5189bcecad12..207fa2c737a6 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -5,7 +5,7 @@ # # Licensed under GPLv2 -# Configuration options for the EXYNOS4 +# Configuration options for the EXYNOS menuconfig ARCH_EXYNOS bool "Samsung EXYNOS" @@ -17,6 +17,7 @@ menuconfig ARCH_EXYNOS select ARM_GIC select COMMON_CLK_SAMSUNG select EXYNOS_THERMAL + select EXYNOS_PMU select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -25,6 +26,7 @@ menuconfig ARCH_EXYNOS select PINCTRL_EXYNOS select PM_GENERIC_DOMAINS if PM select S5P_DEV_MFC + select SOC_SAMSUNG select SRAM select THERMAL select THERMAL_OF diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 2f306767cdfe..34d29df3e006 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -9,7 +9,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree) # Core -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o obj-$(CONFIG_PM_SLEEP) += suspend.o diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index e349a038976d..5365bf1f586a 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -12,7 +12,6 @@ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H #define __ARCH_ARM_MACH_EXYNOS_COMMON_H -#include <linux/of.h> #include <linux/platform_data/cpuidle-exynos.h> #define EXYNOS3250_SOC_ID 0xE3472000 diff --git a/arch/arm/mach-exynos/exynos-pmu.h b/arch/arm/mach-exynos/exynos-pmu.h deleted file mode 100644 index a2ab0d52b230..000000000000 --- a/arch/arm/mach-exynos/exynos-pmu.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header for EXYNOS PMU Driver support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __EXYNOS_PMU_H -#define __EXYNOS_PMU_H - -enum sys_powerdown { - SYS_AFTR, - SYS_LPA, - SYS_SLEEP, - NUM_SYS_POWERDOWN, -}; - -extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); - -#endif /* __EXYNOS_PMU_H */ diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 1c47aee31e9c..bbf51a46f772 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -11,29 +11,23 @@ #include <linux/init.h> #include <linux/io.h> -#include <linux/kernel.h> -#include <linux/serial_s3c.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/pm_domain.h> #include <linux/irqchip.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/memory.h> #include <mach/map.h> #include "common.h" #include "mfc.h" -#include "regs-pmu.h" - -void __iomem *pmu_base_addr; static struct map_desc exynos4_iodesc[] __initdata = { { @@ -70,11 +64,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), - .length = 144 * SZ_1K, - .type = MT_DEVICE, }, }; @@ -230,6 +219,10 @@ static const struct of_device_id exynos_cpufreq_matches[] = { { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" }, +#ifndef CONFIG_BL_SWITCHER + { .compatible = "samsung,exynos5420", .data = "cpufreq-dt" }, + { .compatible = "samsung,exynos5800", .data = "cpufreq-dt" }, +#endif { /* sentinel */ } }; diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 111cfbf66fdb..1bfd1b0bd9dc 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -20,8 +20,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/suspend.h> -#include <mach/map.h> - #include "common.h" #include "smc.h" diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index de3ae59e1cfb..c88325d56743 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -2,7 +2,7 @@ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * - * EXYNOS4 - Memory map definitions + * EXYNOS - Memory map definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,30 +14,18 @@ #include <plat/map-base.h> -/* - * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x10000) - #include <plat/map-s5p.h> #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_CMU 0x10030000 -#define EXYNOS5_PA_CMU 0x10010000 #define EXYNOS4_PA_DMC0 0x10400000 #define EXYNOS4_PA_DMC1 0x10410000 #define EXYNOS4_PA_COREPERI 0x10500000 -#define EXYNOS4_PA_L2CC 0x10502000 #define EXYNOS4_PA_SROMC 0x12570000 #define EXYNOS5_PA_SROMC 0x12250000 -/* Compatibility UART */ - -#define EXYNOS5440_PA_UART0 0x000B0000 - #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 56978199c479..f086bf615b29 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -16,13 +16,13 @@ #include <linux/io.h> #include <linux/of_address.h> #include <linux/syscore_ops.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cputype.h> #include <asm/cp15.h> #include <asm/mcpm.h> #include <asm/smp_plat.h> -#include "regs-pmu.h" #include "common.h" #define EXYNOS5420_CPUS_PER_CLUSTER 4 diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 5bd9559786ba..85c3be63d644 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -15,11 +15,11 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/delay.h> -#include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> #include <linux/of_address.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cacheflush.h> #include <asm/cp15.h> @@ -30,7 +30,6 @@ #include <mach/map.h> #include "common.h" -#include "regs-pmu.h" extern void exynos4_secondary_startup(void); diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 9c1506b499bc..c43b776a51a3 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -17,7 +17,9 @@ #include <linux/suspend.h> #include <linux/cpu_pm.h> #include <linux/io.h> -#include <linux/err.h> +#include <linux/of.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> +#include <linux/soc/samsung/exynos-pmu.h> #include <asm/firmware.h> #include <asm/smp_scu.h> @@ -26,11 +28,7 @@ #include <mach/map.h> -#include <plat/pm-common.h> - #include "common.h" -#include "exynos-pmu.h" -#include "regs-pmu.h" static inline void __iomem *exynos_boot_vector_addr(void) { diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c deleted file mode 100644 index dbf9fe98d479..000000000000 --- a/arch/arm/mach-exynos/pmu.c +++ /dev/null @@ -1,967 +0,0 @@ -/* - * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS - CPU PMU(Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <asm/cputype.h> - -#include "exynos-pmu.h" -#include "regs-pmu.h" - -#define PMU_TABLE_END (-1U) - -struct exynos_pmu_conf { - unsigned int offset; - u8 val[NUM_SYS_POWERDOWN]; -}; - -struct exynos_pmu_data { - const struct exynos_pmu_conf *pmu_config; - const struct exynos_pmu_conf *pmu_config_extra; - - void (*pmu_init)(void); - void (*powerdown_conf)(enum sys_powerdown); - void (*powerdown_conf_extra)(enum sys_powerdown); -}; - -struct exynos_pmu_context { - struct device *dev; - const struct exynos_pmu_data *pmu_data; -}; - -static void __iomem *pmu_base_addr; -static struct exynos_pmu_context *pmu_context; - -static inline void pmu_raw_writel(u32 val, u32 offset) -{ - writel_relaxed(val, pmu_base_addr + offset); -} - -static inline u32 pmu_raw_readl(u32 offset) -{ - return readl_relaxed(pmu_base_addr + offset); -} - -static struct exynos_pmu_conf exynos3250_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */ - { EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS3_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS3_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x3} }, - { EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS3_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS3_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, - { EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, - { EXYNOS3_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS3_CAM_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_LCD0_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_MAUDIO_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos4210_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ - { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } }, - { S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } }, - { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, - { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, - { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos4x12_pmu_config[] = { - { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, - { S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } }, - /* XXX_OPTION register should be set other field */ - { S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } }, - { S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, - { S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } }, - { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, - { S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } }, - { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, - { S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } }, - { S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } }, - { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, - { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, - { S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, - { S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos4412_pmu_config[] = { - { S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } }, - { S5P_ARM_CORE3_LOWPWR, { 0x0, 0x0, 0x2 } }, - { S5P_DIS_IRQ_CORE3, { 0x0, 0x0, 0x0 } }, - { S5P_DIS_IRQ_CENTRAL3, { 0x0, 0x0, 0x0 } }, - { PMU_TABLE_END,}, -}; - -static const struct exynos_pmu_conf exynos5250_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ - { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_FSYS_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, - { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, - { EXYNOS5_ARM_L2_OPTION, { 0x10, 0x10, 0x0 } }, - { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_USBOTG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_G2D_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_USBDRD_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_SDMMC_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_CSSYS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_SECSS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_ROTATOR_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_JPEG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_JPEG_MEM_OPTION, { 0x10, 0x10, 0x0} }, - { EXYNOS5_HSI_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_MCUIOP_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_SATA_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { PMU_TABLE_END,}, -}; - -static struct exynos_pmu_conf exynos5420_pmu_config[] = { - /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */ - { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_ARM_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_ARM_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_KFC_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} }, - { EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x0} }, - { EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, - { EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, - { EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5420_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} }, - { EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, - { EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} }, - { EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} }, - { EXYNOS5420_G2D_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_MSC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_FSYS_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_FSYS2_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_PSGEN_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_PERIC_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5420_WCORE_SYS_PWR_REG, { 0x7, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, - { PMU_TABLE_END,}, -}; - -static unsigned int const exynos3250_list_feed[] = { - EXYNOS3_ARM_CORE_OPTION(0), - EXYNOS3_ARM_CORE_OPTION(1), - EXYNOS3_ARM_CORE_OPTION(2), - EXYNOS3_ARM_CORE_OPTION(3), - EXYNOS3_ARM_COMMON_OPTION, - EXYNOS3_TOP_PWR_OPTION, - EXYNOS3_CORE_TOP_PWR_OPTION, - S5P_CAM_OPTION, - S5P_MFC_OPTION, - S5P_G3D_OPTION, - S5P_LCD0_OPTION, - S5P_ISP_OPTION, -}; - -static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode) -{ - unsigned int i; - unsigned int tmp; - - /* Enable only SC_FEEDBACK */ - for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) { - tmp = pmu_raw_readl(exynos3250_list_feed[i]); - tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER); - tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK; - pmu_raw_writel(tmp, exynos3250_list_feed[i]); - } - - if (mode != SYS_SLEEP) - return; - - pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION); - pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION); - pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION); - pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION, - EXYNOS3_EXT_REGULATOR_COREBLK_DURATION); -} - -static unsigned int const exynos5_list_both_cnt_feed[] = { - EXYNOS5_ARM_CORE0_OPTION, - EXYNOS5_ARM_CORE1_OPTION, - EXYNOS5_ARM_COMMON_OPTION, - EXYNOS5_GSCL_OPTION, - EXYNOS5_ISP_OPTION, - EXYNOS5_MFC_OPTION, - EXYNOS5_G3D_OPTION, - EXYNOS5_DISP1_OPTION, - EXYNOS5_MAU_OPTION, - EXYNOS5_TOP_PWR_OPTION, - EXYNOS5_TOP_PWR_SYSMEM_OPTION, -}; - -static unsigned int const exynos5_list_disable_wfi_wfe[] = { - EXYNOS5_ARM_CORE1_OPTION, - EXYNOS5_FSYS_ARM_OPTION, - EXYNOS5_ISP_ARM_OPTION, -}; - -static unsigned int const exynos5420_list_disable_pmu_reg[] = { - EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, - EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, - EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG, - EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG, - EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, - EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, - EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG, - EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG, - EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, - EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, - EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG, - EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, -}; - -static void exynos5420_powerdown_conf(enum sys_powerdown mode) -{ - u32 this_cluster; - - this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1); - - /* - * set the cluster id to IROM register to ensure that we wake - * up with the current cluster. - */ - pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2); -} - - -static void exynos5_powerdown_conf(enum sys_powerdown mode) -{ - unsigned int i; - unsigned int tmp; - - /* - * Enable both SC_FEEDBACK and SC_COUNTER - */ - for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) { - tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]); - tmp |= (EXYNOS5_USE_SC_FEEDBACK | - EXYNOS5_USE_SC_COUNTER); - pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]); - } - - /* - * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable - */ - tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION); - tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION); - - /* - * Disable WFI/WFE on XXX_OPTION - */ - for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) { - tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]); - tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE | - EXYNOS5_OPTION_USE_STANDBYWFI); - pmu_raw_writel(tmp, exynos5_list_disable_wfi_wfe[i]); - } -} - -void exynos_sys_powerdown_conf(enum sys_powerdown mode) -{ - unsigned int i; - const struct exynos_pmu_data *pmu_data; - - if (!pmu_context) - return; - - pmu_data = pmu_context->pmu_data; - - if (pmu_data->powerdown_conf) - pmu_data->powerdown_conf(mode); - - if (pmu_data->pmu_config) { - for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++) - pmu_raw_writel(pmu_data->pmu_config[i].val[mode], - pmu_data->pmu_config[i].offset); - } - - if (pmu_data->powerdown_conf_extra) - pmu_data->powerdown_conf_extra(mode); - - if (pmu_data->pmu_config_extra) { - for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++) - pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode], - pmu_data->pmu_config_extra[i].offset); - } -} - -static void exynos3250_pmu_init(void) -{ - unsigned int value; - - /* - * To prevent from issuing new bus request form L2 memory system - * If core status is power down, should be set '1' to L2 power down - */ - value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION); - value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION); - - /* Enable USE_STANDBY_WFI for all CORE */ - pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); - - /* - * Set PSHOLD port for output high - */ - value = pmu_raw_readl(S5P_PS_HOLD_CONTROL); - value |= S5P_PS_HOLD_OUTPUT_HIGH; - pmu_raw_writel(value, S5P_PS_HOLD_CONTROL); - - /* - * Enable signal for PSHOLD port - */ - value = pmu_raw_readl(S5P_PS_HOLD_CONTROL); - value |= S5P_PS_HOLD_EN; - pmu_raw_writel(value, S5P_PS_HOLD_CONTROL); -} - -static void exynos5250_pmu_init(void) -{ - unsigned int value; - /* - * When SYS_WDTRESET is set, watchdog timer reset request - * is ignored by power management unit. - */ - value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE); - value &= ~EXYNOS5_SYS_WDTRESET; - pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE); - - value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST); - value &= ~EXYNOS5_SYS_WDTRESET; - pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST); -} - -static void exynos5420_pmu_init(void) -{ - unsigned int value; - int i; - - /* - * Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers - * for local power blocks to Low initially as per Table 8-4: - * "System-Level Power-Down Configuration Registers". - */ - for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++) - pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]); - - /* Enable USE_STANDBY_WFI for all CORE */ - pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); - - value = pmu_raw_readl(EXYNOS_L2_OPTION(0)); - value &= ~EXYNOS5_USE_RETENTION; - pmu_raw_writel(value, EXYNOS_L2_OPTION(0)); - - value = pmu_raw_readl(EXYNOS_L2_OPTION(1)); - value &= ~EXYNOS5_USE_RETENTION; - pmu_raw_writel(value, EXYNOS_L2_OPTION(1)); - - /* - * If L2_COMMON is turned off, clocks related to ATB async - * bridge are gated. Thus, when ISP power is gated, LPI - * may get stuck. - */ - value = pmu_raw_readl(EXYNOS5420_LPI_MASK); - value |= EXYNOS5420_ATB_ISP_ARM; - pmu_raw_writel(value, EXYNOS5420_LPI_MASK); - - value = pmu_raw_readl(EXYNOS5420_LPI_MASK1); - value |= EXYNOS5420_ATB_KFC; - pmu_raw_writel(value, EXYNOS5420_LPI_MASK1); - - /* Prevent issue of new bus request from L2 memory */ - value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION); - value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION); - - value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION); - value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; - pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION); - - /* This setting is to reduce suspend/resume time */ - pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3); - - /* Serialized CPU wakeup of Eagle */ - pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE); - - pmu_raw_writel(SPREAD_USE_STANDWFI, - EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI); - - pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER); - pr_info("EXYNOS5420 PMU initialized\n"); -} - -static const struct exynos_pmu_data exynos3250_pmu_data = { - .pmu_config = exynos3250_pmu_config, - .pmu_init = exynos3250_pmu_init, - .powerdown_conf_extra = exynos3250_powerdown_conf_extra, -}; - -static const struct exynos_pmu_data exynos4210_pmu_data = { - .pmu_config = exynos4210_pmu_config, -}; - -static const struct exynos_pmu_data exynos4212_pmu_data = { - .pmu_config = exynos4x12_pmu_config, -}; - -static const struct exynos_pmu_data exynos4412_pmu_data = { - .pmu_config = exynos4x12_pmu_config, - .pmu_config_extra = exynos4412_pmu_config, -}; - -static const struct exynos_pmu_data exynos5250_pmu_data = { - .pmu_config = exynos5250_pmu_config, - .pmu_init = exynos5250_pmu_init, - .powerdown_conf = exynos5_powerdown_conf, -}; - -static const struct exynos_pmu_data exynos5420_pmu_data = { - .pmu_config = exynos5420_pmu_config, - .pmu_init = exynos5420_pmu_init, - .powerdown_conf = exynos5420_powerdown_conf, -}; - -/* - * PMU platform driver and devicetree bindings. - */ -static const struct of_device_id exynos_pmu_of_device_ids[] = { - { - .compatible = "samsung,exynos3250-pmu", - .data = &exynos3250_pmu_data, - }, { - .compatible = "samsung,exynos4210-pmu", - .data = &exynos4210_pmu_data, - }, { - .compatible = "samsung,exynos4212-pmu", - .data = &exynos4212_pmu_data, - }, { - .compatible = "samsung,exynos4412-pmu", - .data = &exynos4412_pmu_data, - }, { - .compatible = "samsung,exynos5250-pmu", - .data = &exynos5250_pmu_data, - }, { - .compatible = "samsung,exynos5420-pmu", - .data = &exynos5420_pmu_data, - }, - { /*sentinel*/ }, -}; - -static int exynos_pmu_probe(struct platform_device *pdev) -{ - const struct of_device_id *match; - struct device *dev = &pdev->dev; - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - pmu_base_addr = devm_ioremap_resource(dev, res); - if (IS_ERR(pmu_base_addr)) - return PTR_ERR(pmu_base_addr); - - pmu_context = devm_kzalloc(&pdev->dev, - sizeof(struct exynos_pmu_context), - GFP_KERNEL); - if (!pmu_context) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - pmu_context->dev = dev; - - match = of_match_node(exynos_pmu_of_device_ids, dev->of_node); - - pmu_context->pmu_data = match->data; - - if (pmu_context->pmu_data->pmu_init) - pmu_context->pmu_data->pmu_init(); - - platform_set_drvdata(pdev, pmu_context); - - dev_dbg(dev, "Exynos PMU Driver probe done\n"); - return 0; -} - -static struct platform_driver exynos_pmu_driver = { - .driver = { - .name = "exynos-pmu", - .of_match_table = exynos_pmu_of_device_ids, - }, - .probe = exynos_pmu_probe, -}; - -static int __init exynos_pmu_init(void) -{ - return platform_driver_register(&exynos_pmu_driver); - -} -postcore_initcall(exynos_pmu_init); diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h deleted file mode 100644 index 5e4f4c23b06a..000000000000 --- a/arch/arm/mach-exynos/regs-pmu.h +++ /dev/null @@ -1,693 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - Power management unit definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_PMU_H -#define __ASM_ARCH_REGS_PMU_H __FILE__ - -#define S5P_CENTRAL_SEQ_CONFIGURATION 0x0200 - -#define S5P_CENTRAL_LOWPWR_CFG (1 << 16) - -#define S5P_CENTRAL_SEQ_OPTION 0x0208 - -#define S5P_USE_STANDBY_WFI0 (1 << 16) -#define S5P_USE_STANDBY_WFI1 (1 << 17) -#define S5P_USE_STANDBY_WFI2 (1 << 19) -#define S5P_USE_STANDBY_WFI3 (1 << 20) -#define S5P_USE_STANDBY_WFE0 (1 << 24) -#define S5P_USE_STANDBY_WFE1 (1 << 25) -#define S5P_USE_STANDBY_WFE2 (1 << 27) -#define S5P_USE_STANDBY_WFE3 (1 << 28) - -#define S5P_USE_STANDBY_WFI_ALL \ - (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \ - S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \ - S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \ - S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3) - -#define S5P_USE_DELAYED_RESET_ASSERTION BIT(12) - -#define EXYNOS_CORE_PO_RESET(n) ((1 << 4) << n) -#define EXYNOS_WAKEUP_FROM_LOWPWR (1 << 28) -#define EXYNOS_SWRESET 0x0400 -#define EXYNOS5440_SWRESET 0x00C4 - -#define S5P_WAKEUP_STAT 0x0600 -#define S5P_EINT_WAKEUP_MASK 0x0604 -#define S5P_WAKEUP_MASK 0x0608 -#define S5P_WAKEUP_MASK2 0x0614 - -#define S5P_INFORM0 0x0800 -#define S5P_INFORM1 0x0804 -#define S5P_INFORM5 0x0814 -#define S5P_INFORM6 0x0818 -#define S5P_INFORM7 0x081C -#define S5P_PMU_SPARE2 0x0908 -#define S5P_PMU_SPARE3 0x090C - -#define EXYNOS_IROM_DATA2 0x0988 -#define S5P_ARM_CORE0_LOWPWR 0x1000 -#define S5P_DIS_IRQ_CORE0 0x1004 -#define S5P_DIS_IRQ_CENTRAL0 0x1008 -#define S5P_ARM_CORE1_LOWPWR 0x1010 -#define S5P_DIS_IRQ_CORE1 0x1014 -#define S5P_DIS_IRQ_CENTRAL1 0x1018 -#define S5P_ARM_COMMON_LOWPWR 0x1080 -#define S5P_L2_0_LOWPWR 0x10C0 -#define S5P_L2_1_LOWPWR 0x10C4 -#define S5P_CMU_ACLKSTOP_LOWPWR 0x1100 -#define S5P_CMU_SCLKSTOP_LOWPWR 0x1104 -#define S5P_CMU_RESET_LOWPWR 0x110C -#define S5P_APLL_SYSCLK_LOWPWR 0x1120 -#define S5P_MPLL_SYSCLK_LOWPWR 0x1124 -#define S5P_VPLL_SYSCLK_LOWPWR 0x1128 -#define S5P_EPLL_SYSCLK_LOWPWR 0x112C -#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR 0x1138 -#define S5P_CMU_RESET_GPSALIVE_LOWPWR 0x113C -#define S5P_CMU_CLKSTOP_CAM_LOWPWR 0x1140 -#define S5P_CMU_CLKSTOP_TV_LOWPWR 0x1144 -#define S5P_CMU_CLKSTOP_MFC_LOWPWR 0x1148 -#define S5P_CMU_CLKSTOP_G3D_LOWPWR 0x114C -#define S5P_CMU_CLKSTOP_LCD0_LOWPWR 0x1150 -#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR 0x1158 -#define S5P_CMU_CLKSTOP_GPS_LOWPWR 0x115C -#define S5P_CMU_RESET_CAM_LOWPWR 0x1160 -#define S5P_CMU_RESET_TV_LOWPWR 0x1164 -#define S5P_CMU_RESET_MFC_LOWPWR 0x1168 -#define S5P_CMU_RESET_G3D_LOWPWR 0x116C -#define S5P_CMU_RESET_LCD0_LOWPWR 0x1170 -#define S5P_CMU_RESET_MAUDIO_LOWPWR 0x1178 -#define S5P_CMU_RESET_GPS_LOWPWR 0x117C -#define S5P_TOP_BUS_LOWPWR 0x1180 -#define S5P_TOP_RETENTION_LOWPWR 0x1184 -#define S5P_TOP_PWR_LOWPWR 0x1188 -#define S5P_LOGIC_RESET_LOWPWR 0x11A0 -#define S5P_ONENAND_MEM_LOWPWR 0x11C0 -#define S5P_G2D_ACP_MEM_LOWPWR 0x11C8 -#define S5P_USBOTG_MEM_LOWPWR 0x11CC -#define S5P_HSMMC_MEM_LOWPWR 0x11D0 -#define S5P_CSSYS_MEM_LOWPWR 0x11D4 -#define S5P_SECSS_MEM_LOWPWR 0x11D8 -#define S5P_PAD_RETENTION_DRAM_LOWPWR 0x1200 -#define S5P_PAD_RETENTION_MAUDIO_LOWPWR 0x1204 -#define S5P_PAD_RETENTION_GPIO_LOWPWR 0x1220 -#define S5P_PAD_RETENTION_UART_LOWPWR 0x1224 -#define S5P_PAD_RETENTION_MMCA_LOWPWR 0x1228 -#define S5P_PAD_RETENTION_MMCB_LOWPWR 0x122C -#define S5P_PAD_RETENTION_EBIA_LOWPWR 0x1230 -#define S5P_PAD_RETENTION_EBIB_LOWPWR 0x1234 -#define S5P_PAD_RETENTION_ISOLATION_LOWPWR 0x1240 -#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR 0x1260 -#define S5P_XUSBXTI_LOWPWR 0x1280 -#define S5P_XXTI_LOWPWR 0x1284 -#define S5P_EXT_REGULATOR_LOWPWR 0x12C0 -#define S5P_GPIO_MODE_LOWPWR 0x1300 -#define S5P_GPIO_MODE_MAUDIO_LOWPWR 0x1340 -#define S5P_CAM_LOWPWR 0x1380 -#define S5P_TV_LOWPWR 0x1384 -#define S5P_MFC_LOWPWR 0x1388 -#define S5P_G3D_LOWPWR 0x138C -#define S5P_LCD0_LOWPWR 0x1390 -#define S5P_MAUDIO_LOWPWR 0x1398 -#define S5P_GPS_LOWPWR 0x139C -#define S5P_GPS_ALIVE_LOWPWR 0x13A0 - -#define EXYNOS_ARM_CORE0_CONFIGURATION 0x2000 -#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \ - (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr))) -#define EXYNOS_ARM_CORE_STATUS(_nr) \ - (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4) -#define EXYNOS_ARM_CORE_OPTION(_nr) \ - (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x8) - -#define EXYNOS_ARM_COMMON_CONFIGURATION 0x2500 -#define EXYNOS_COMMON_CONFIGURATION(_nr) \ - (EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr))) -#define EXYNOS_COMMON_STATUS(_nr) \ - (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4) -#define EXYNOS_COMMON_OPTION(_nr) \ - (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8) - -#define EXYNOS_CORE_LOCAL_PWR_EN 0x3 - -#define EXYNOS_ARM_COMMON_STATUS 0x2504 -#define EXYNOS_COMMON_OPTION(_nr) \ - (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8) - -#define EXYNOS_ARM_L2_CONFIGURATION 0x2600 -#define EXYNOS_L2_CONFIGURATION(_nr) \ - (EXYNOS_ARM_L2_CONFIGURATION + ((_nr) * 0x80)) -#define EXYNOS_L2_STATUS(_nr) \ - (EXYNOS_L2_CONFIGURATION(_nr) + 0x4) -#define EXYNOS_L2_OPTION(_nr) \ - (EXYNOS_L2_CONFIGURATION(_nr) + 0x8) -#define EXYNOS_L2_COMMON_PWR_EN 0x3 - -#define EXYNOS_ARM_CORE_X_STATUS_OFFSET 0x4 - -#define EXYNOS5_APLL_SYSCLK_CONFIGURATION 0x2A00 -#define EXYNOS5_APLL_SYSCLK_STATUS 0x2A04 - -#define EXYNOS5_ARM_L2_OPTION 0x2608 -#define EXYNOS5_USE_RETENTION BIT(4) - -#define EXYNOS5_L2RSTDISABLE_VALUE BIT(3) - -#define S5P_PAD_RET_MAUDIO_OPTION 0x3028 -#define S5P_PAD_RET_MMC2_OPTION 0x30c8 -#define S5P_PAD_RET_GPIO_OPTION 0x3108 -#define S5P_PAD_RET_UART_OPTION 0x3128 -#define S5P_PAD_RET_MMCA_OPTION 0x3148 -#define S5P_PAD_RET_MMCB_OPTION 0x3168 -#define S5P_PAD_RET_EBIA_OPTION 0x3188 -#define S5P_PAD_RET_EBIB_OPTION 0x31A8 -#define S5P_PAD_RET_SPI_OPTION 0x31c8 - -#define S5P_PS_HOLD_CONTROL 0x330C -#define S5P_PS_HOLD_EN (1 << 31) -#define S5P_PS_HOLD_OUTPUT_HIGH (3 << 8) - -#define S5P_CAM_OPTION 0x3C08 -#define S5P_MFC_OPTION 0x3C48 -#define S5P_G3D_OPTION 0x3C68 -#define S5P_LCD0_OPTION 0x3C88 -#define S5P_LCD1_OPTION 0x3CA8 -#define S5P_ISP_OPTION S5P_LCD1_OPTION - -#define S5P_CORE_LOCAL_PWR_EN 0x3 -#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8) -#define S5P_CORE_AUTOWAKEUP_EN (1 << 31) - -/* Only for EXYNOS4210 */ -#define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 -#define S5P_CMU_RESET_LCD1_LOWPWR 0x1174 -#define S5P_MODIMIF_MEM_LOWPWR 0x11C4 -#define S5P_PCIE_MEM_LOWPWR 0x11E0 -#define S5P_SATA_MEM_LOWPWR 0x11E4 -#define S5P_LCD1_LOWPWR 0x1394 - -/* Only for EXYNOS4x12 */ -#define S5P_ISP_ARM_LOWPWR 0x1050 -#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR 0x1054 -#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR 0x1058 -#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR 0x1110 -#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR 0x1114 -#define S5P_CMU_RESET_COREBLK_LOWPWR 0x111C -#define S5P_MPLLUSER_SYSCLK_LOWPWR 0x1130 -#define S5P_CMU_CLKSTOP_ISP_LOWPWR 0x1154 -#define S5P_CMU_RESET_ISP_LOWPWR 0x1174 -#define S5P_TOP_BUS_COREBLK_LOWPWR 0x1190 -#define S5P_TOP_RETENTION_COREBLK_LOWPWR 0x1194 -#define S5P_TOP_PWR_COREBLK_LOWPWR 0x1198 -#define S5P_OSCCLK_GATE_LOWPWR 0x11A4 -#define S5P_LOGIC_RESET_COREBLK_LOWPWR 0x11B0 -#define S5P_OSCCLK_GATE_COREBLK_LOWPWR 0x11B4 -#define S5P_HSI_MEM_LOWPWR 0x11C4 -#define S5P_ROTATOR_MEM_LOWPWR 0x11DC -#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR 0x123C -#define S5P_PAD_ISOLATION_COREBLK_LOWPWR 0x1250 -#define S5P_GPIO_MODE_COREBLK_LOWPWR 0x1320 -#define S5P_TOP_ASB_RESET_LOWPWR 0x1344 -#define S5P_TOP_ASB_ISOLATION_LOWPWR 0x1348 -#define S5P_ISP_LOWPWR 0x1394 -#define S5P_DRAM_FREQ_DOWN_LOWPWR 0x13B0 -#define S5P_DDRPHY_DLLOFF_LOWPWR 0x13B4 -#define S5P_CMU_SYSCLK_ISP_LOWPWR 0x13B8 -#define S5P_CMU_SYSCLK_GPS_LOWPWR 0x13BC -#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR 0x13C0 - -#define S5P_ARM_L2_0_OPTION 0x2608 -#define S5P_ARM_L2_1_OPTION 0x2628 -#define S5P_ONENAND_MEM_OPTION 0x2E08 -#define S5P_HSI_MEM_OPTION 0x2E28 -#define S5P_G2D_ACP_MEM_OPTION 0x2E48 -#define S5P_USBOTG_MEM_OPTION 0x2E68 -#define S5P_HSMMC_MEM_OPTION 0x2E88 -#define S5P_CSSYS_MEM_OPTION 0x2EA8 -#define S5P_SECSS_MEM_OPTION 0x2EC8 -#define S5P_ROTATOR_MEM_OPTION 0x2F48 - -/* Only for EXYNOS4412 */ -#define S5P_ARM_CORE2_LOWPWR 0x1020 -#define S5P_DIS_IRQ_CORE2 0x1024 -#define S5P_DIS_IRQ_CENTRAL2 0x1028 -#define S5P_ARM_CORE3_LOWPWR 0x1030 -#define S5P_DIS_IRQ_CORE3 0x1034 -#define S5P_DIS_IRQ_CENTRAL3 0x1038 - -/* Only for EXYNOS3XXX */ -#define EXYNOS3_ARM_CORE0_SYS_PWR_REG 0x1000 -#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004 -#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008 -#define EXYNOS3_ARM_CORE1_SYS_PWR_REG 0x1010 -#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014 -#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018 -#define EXYNOS3_ISP_ARM_SYS_PWR_REG 0x1050 -#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054 -#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058 -#define EXYNOS3_ARM_COMMON_SYS_PWR_REG 0x1080 -#define EXYNOS3_ARM_L2_SYS_PWR_REG 0x10C0 -#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG 0x1100 -#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG 0x1104 -#define EXYNOS3_CMU_RESET_SYS_PWR_REG 0x110C -#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG 0x1110 -#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG 0x1114 -#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG 0x111C -#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG 0x1120 -#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG 0x1124 -#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG 0x1128 -#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG 0x112C -#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1130 -#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1134 -#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG 0x1138 -#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140 -#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148 -#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C -#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150 -#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1154 -#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158 -#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG 0x1160 -#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG 0x1168 -#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG 0x116C -#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG 0x1170 -#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG 0x1174 -#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178 -#define EXYNOS3_TOP_BUS_SYS_PWR_REG 0x1180 -#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG 0x1184 -#define EXYNOS3_TOP_PWR_SYS_PWR_REG 0x1188 -#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG 0x1190 -#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG 0x1194 -#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG 0x1198 -#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG 0x11A0 -#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG 0x11A4 -#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG 0x11B0 -#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG 0x11B4 -#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 -#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204 -#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG 0x1208 -#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1218 -#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 -#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG 0x1224 -#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1228 -#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG 0x122C -#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 -#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 -#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1238 -#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG 0x1240 -#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG 0x1260 -#define EXYNOS3_XUSBXTI_SYS_PWR_REG 0x1280 -#define EXYNOS3_XXTI_SYS_PWR_REG 0x1284 -#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG 0x12C0 -#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG 0x12C4 -#define EXYNOS3_GPIO_MODE_SYS_PWR_REG 0x1300 -#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340 -#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG 0x1344 -#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348 -#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG 0x1350 -#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG 0x1354 -#define EXYNOS3_CAM_SYS_PWR_REG 0x1380 -#define EXYNOS3_MFC_SYS_PWR_REG 0x1388 -#define EXYNOS3_G3D_SYS_PWR_REG 0x138C -#define EXYNOS3_LCD0_SYS_PWR_REG 0x1390 -#define EXYNOS3_ISP_SYS_PWR_REG 0x1394 -#define EXYNOS3_MAUDIO_SYS_PWR_REG 0x1398 -#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG 0x13B0 -#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG 0x13B4 -#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG 0x13B8 -#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG 0x13C0 -#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG 0x13C4 -#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG 0x13C8 - -#define EXYNOS3_ARM_CORE0_OPTION 0x2008 -#define EXYNOS3_ARM_CORE_OPTION(_nr) \ - (EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80)) - -#define EXYNOS3_ARM_COMMON_OPTION 0x2408 -#define EXYNOS3_ARM_L2_OPTION 0x2608 -#define EXYNOS3_TOP_PWR_OPTION 0x2C48 -#define EXYNOS3_CORE_TOP_PWR_OPTION 0x2CA8 -#define EXYNOS3_XUSBXTI_DURATION 0x341C -#define EXYNOS3_XXTI_DURATION 0x343C -#define EXYNOS3_EXT_REGULATOR_DURATION 0x361C -#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION 0x363C -#define XUSBXTI_DURATION 0x00000BB8 -#define XXTI_DURATION XUSBXTI_DURATION -#define EXT_REGULATOR_DURATION 0x00001D4C -#define EXT_REGULATOR_COREBLK_DURATION EXT_REGULATOR_DURATION - -/* for XXX_OPTION */ -#define EXYNOS3_OPTION_USE_SC_COUNTER (1 << 0) -#define EXYNOS3_OPTION_USE_SC_FEEDBACK (1 << 1) -#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7) - -/* For EXYNOS5 */ - -#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408 -#define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C - -#define EXYNOS5_USE_RETENTION BIT(4) -#define EXYNOS5_SYS_WDTRESET (1 << 20) - -#define EXYNOS5_ARM_CORE0_SYS_PWR_REG 0x1000 -#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004 -#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008 -#define EXYNOS5_ARM_CORE1_SYS_PWR_REG 0x1010 -#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014 -#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018 -#define EXYNOS5_FSYS_ARM_SYS_PWR_REG 0x1040 -#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG 0x1048 -#define EXYNOS5_ISP_ARM_SYS_PWR_REG 0x1050 -#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054 -#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058 -#define EXYNOS5_ARM_COMMON_SYS_PWR_REG 0x1080 -#define EXYNOS5_ARM_L2_SYS_PWR_REG 0x10C0 -#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG 0x1100 -#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG 0x1104 -#define EXYNOS5_CMU_RESET_SYS_PWR_REG 0x110C -#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG 0x1120 -#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG 0x1124 -#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG 0x112C -#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG 0x1130 -#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG 0x1134 -#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG 0x1138 -#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG 0x1140 -#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG 0x1144 -#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG 0x1148 -#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG 0x114C -#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG 0x1150 -#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG 0x1154 -#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1164 -#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1170 -#define EXYNOS5_TOP_BUS_SYS_PWR_REG 0x1180 -#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG 0x1184 -#define EXYNOS5_TOP_PWR_SYS_PWR_REG 0x1188 -#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG 0x1190 -#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG 0x1194 -#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG 0x1198 -#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG 0x11A0 -#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG 0x11A4 -#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG 0x11B0 -#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG 0x11B4 -#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG 0x11C0 -#define EXYNOS5_G2D_MEM_SYS_PWR_REG 0x11C8 -#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG 0x11CC -#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG 0x11D0 -#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG 0x11D4 -#define EXYNOS5_SECSS_MEM_SYS_PWR_REG 0x11D8 -#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG 0x11DC -#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG 0x11E0 -#define EXYNOS5_INTROM_MEM_SYS_PWR_REG 0x11E4 -#define EXYNOS5_JPEG_MEM_SYS_PWR_REG 0x11E8 -#define EXYNOS5_HSI_MEM_SYS_PWR_REG 0x11EC -#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG 0x11F4 -#define EXYNOS5_SATA_MEM_SYS_PWR_REG 0x11FC -#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 -#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG 0x1204 -#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG 0x1208 -#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 -#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG 0x1224 -#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228 -#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG 0x122C -#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 -#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 -#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG 0x1238 -#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG 0x123C -#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG 0x1240 -#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG 0x1250 -#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG 0x1260 -#define EXYNOS5_XUSBXTI_SYS_PWR_REG 0x1280 -#define EXYNOS5_XXTI_SYS_PWR_REG 0x1284 -#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG 0x12C0 -#define EXYNOS5_GPIO_MODE_SYS_PWR_REG 0x1300 -#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG 0x1320 -#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG 0x1340 -#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG 0x1344 -#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348 -#define EXYNOS5_GSCL_SYS_PWR_REG 0x1400 -#define EXYNOS5_ISP_SYS_PWR_REG 0x1404 -#define EXYNOS5_MFC_SYS_PWR_REG 0x1408 -#define EXYNOS5_G3D_SYS_PWR_REG 0x140C -#define EXYNOS5_DISP1_SYS_PWR_REG 0x1414 -#define EXYNOS5_MAU_SYS_PWR_REG 0x1418 -#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG 0x1480 -#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1484 -#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1488 -#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x148C -#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1494 -#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1498 -#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG 0x14C0 -#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG 0x14C4 -#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG 0x14C8 -#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG 0x14CC -#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D4 -#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D8 -#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG 0x1580 -#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG 0x1584 -#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG 0x1588 -#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG 0x158C -#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG 0x1594 -#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG 0x1598 - -#define EXYNOS5_ARM_CORE0_OPTION 0x2008 -#define EXYNOS5_ARM_CORE1_OPTION 0x2088 -#define EXYNOS5_FSYS_ARM_OPTION 0x2208 -#define EXYNOS5_ISP_ARM_OPTION 0x2288 -#define EXYNOS5_ARM_COMMON_OPTION 0x2408 -#define EXYNOS5_ARM_L2_OPTION 0x2608 -#define EXYNOS5_TOP_PWR_OPTION 0x2C48 -#define EXYNOS5_TOP_PWR_SYSMEM_OPTION 0x2CC8 -#define EXYNOS5_JPEG_MEM_OPTION 0x2F48 -#define EXYNOS5_GSCL_OPTION 0x4008 -#define EXYNOS5_ISP_OPTION 0x4028 -#define EXYNOS5_MFC_OPTION 0x4048 -#define EXYNOS5_G3D_OPTION 0x4068 -#define EXYNOS5_DISP1_OPTION 0x40A8 -#define EXYNOS5_MAU_OPTION 0x40C8 - -#define EXYNOS5_USE_SC_FEEDBACK (1 << 1) -#define EXYNOS5_USE_SC_COUNTER (1 << 0) - -#define EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7) - -#define EXYNOS5_OPTION_USE_STANDBYWFE (1 << 24) -#define EXYNOS5_OPTION_USE_STANDBYWFI (1 << 16) - -#define EXYNOS5_OPTION_USE_RETENTION (1 << 4) - -#define EXYNOS5420_SWRESET_KFC_SEL 0x3 - -/* Only for EXYNOS5420 */ -#define EXYNOS5420_ISP_ARM_OPTION 0x2488 -#define EXYNOS5420_L2RSTDISABLE_VALUE BIT(3) - -#define EXYNOS5420_LPI_MASK 0x0004 -#define EXYNOS5420_LPI_MASK1 0x0008 -#define EXYNOS5420_UFS BIT(8) -#define EXYNOS5420_ATB_KFC BIT(13) -#define EXYNOS5420_ATB_ISP_ARM BIT(19) -#define EXYNOS5420_EMULATION BIT(31) -#define ATB_ISP_ARM BIT(12) -#define ATB_KFC BIT(13) -#define ATB_NOC BIT(14) - -#define EXYNOS5420_ARM_INTR_SPREAD_ENABLE 0x0100 -#define EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI 0x0104 -#define EXYNOS5420_UP_SCHEDULER 0x0120 -#define SPREAD_ENABLE 0xF -#define SPREAD_USE_STANDWFI 0xF - -#define EXYNOS5420_KFC_CORE_RESET0 BIT(8) -#define EXYNOS5420_KFC_ETM_RESET0 BIT(20) - -#define EXYNOS5420_KFC_CORE_RESET(_nr) \ - ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr)) - -#define EXYNOS5420_BB_CON1 0x0784 -#define EXYNOS5420_BB_SEL_EN BIT(31) -#define EXYNOS5420_BB_PMOS_EN BIT(7) -#define EXYNOS5420_BB_1300X 0XF - -#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020 -#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024 -#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028 -#define EXYNOS5420_ARM_CORE3_SYS_PWR_REG 0x1030 -#define EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG 0x1034 -#define EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG 0x1038 -#define EXYNOS5420_KFC_CORE0_SYS_PWR_REG 0x1040 -#define EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG 0x1044 -#define EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG 0x1048 -#define EXYNOS5420_KFC_CORE1_SYS_PWR_REG 0x1050 -#define EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG 0x1054 -#define EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG 0x1058 -#define EXYNOS5420_KFC_CORE2_SYS_PWR_REG 0x1060 -#define EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG 0x1064 -#define EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG 0x1068 -#define EXYNOS5420_KFC_CORE3_SYS_PWR_REG 0x1070 -#define EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG 0x1074 -#define EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG 0x1078 -#define EXYNOS5420_ISP_ARM_SYS_PWR_REG 0x1090 -#define EXYNOS5420_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1094 -#define EXYNOS5420_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1098 -#define EXYNOS5420_ARM_COMMON_SYS_PWR_REG 0x10A0 -#define EXYNOS5420_KFC_COMMON_SYS_PWR_REG 0x10B0 -#define EXYNOS5420_KFC_L2_SYS_PWR_REG 0x10D0 -#define EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG 0x1158 -#define EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG 0x115C -#define EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG 0x1160 -#define EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG 0x1174 -#define EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG 0x1178 -#define EXYNOS5420_INTRAM_MEM_SYS_PWR_REG 0x11B8 -#define EXYNOS5420_INTROM_MEM_SYS_PWR_REG 0x11BC -#define EXYNOS5420_ONENANDXL_MEM_SYS_PWR 0x11C0 -#define EXYNOS5420_USBDEV_MEM_SYS_PWR 0x11CC -#define EXYNOS5420_USBDEV1_MEM_SYS_PWR 0x11D0 -#define EXYNOS5420_SDMMC_MEM_SYS_PWR 0x11D4 -#define EXYNOS5420_CSSYS_MEM_SYS_PWR 0x11D8 -#define EXYNOS5420_SECSS_MEM_SYS_PWR 0x11DC -#define EXYNOS5420_ROTATOR_MEM_SYS_PWR 0x11E0 -#define EXYNOS5420_INTRAM_MEM_SYS_PWR 0x11E4 -#define EXYNOS5420_INTROM_MEM_SYS_PWR 0x11E8 -#define EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1208 -#define EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1210 -#define EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG 0x1214 -#define EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1218 -#define EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG 0x121C -#define EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1220 -#define EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG 0x1224 -#define EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1228 -#define EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG 0x122C -#define EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG 0x1230 -#define EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG 0x1234 -#define EXYNOS5420_DISP1_SYS_PWR_REG 0x1410 -#define EXYNOS5420_MAU_SYS_PWR_REG 0x1414 -#define EXYNOS5420_G2D_SYS_PWR_REG 0x1418 -#define EXYNOS5420_MSC_SYS_PWR_REG 0x141C -#define EXYNOS5420_FSYS_SYS_PWR_REG 0x1420 -#define EXYNOS5420_FSYS2_SYS_PWR_REG 0x1424 -#define EXYNOS5420_PSGEN_SYS_PWR_REG 0x1428 -#define EXYNOS5420_PERIC_SYS_PWR_REG 0x142C -#define EXYNOS5420_WCORE_SYS_PWR_REG 0x1430 -#define EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1490 -#define EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1494 -#define EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG 0x1498 -#define EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG 0x149C -#define EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG 0x14A0 -#define EXYNOS5420_CMU_CLKSTOP_FSYS2_SYS_PWR_REG 0x14A4 -#define EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG 0x14A8 -#define EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG 0x14AC -#define EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG 0x14B0 -#define EXYNOS5420_CMU_SYSCLK_TOPPWR_SYS_PWR_REG 0x14BC -#define EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D0 -#define EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D4 -#define EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG 0x14D8 -#define EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG 0x14DC -#define EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG 0x14E0 -#define EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG 0x14E4 -#define EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG 0x14E8 -#define EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG 0x14EC -#define EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG 0x14F0 -#define EXYNOS5420_CMU_SYSCLK_SYSMEM_TOPPWR_SYS_PWR_REG 0x14F4 -#define EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG 0x1570 -#define EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG 0x1574 -#define EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG 0x1578 -#define EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG 0x157C -#define EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG 0x1590 -#define EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG 0x1594 -#define EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG 0x1598 -#define EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG 0x159C -#define EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG 0x15A0 -#define EXYNOS5420_SFR_AXI_CGDIS1 0x15E4 -#define EXYNOS_ARM_CORE2_CONFIGURATION 0x2100 -#define EXYNOS5420_ARM_CORE2_OPTION 0x2108 -#define EXYNOS_ARM_CORE3_CONFIGURATION 0x2180 -#define EXYNOS5420_ARM_CORE3_OPTION 0x2188 -#define EXYNOS5420_ARM_COMMON_STATUS 0x2504 -#define EXYNOS5420_ARM_COMMON_OPTION 0x2508 -#define EXYNOS5420_KFC_COMMON_STATUS 0x2584 -#define EXYNOS5420_KFC_COMMON_OPTION 0x2588 -#define EXYNOS5420_LOGIC_RESET_DURATION3 0x2D1C - -#define EXYNOS5420_PAD_RET_GPIO_OPTION 0x30C8 -#define EXYNOS5420_PAD_RET_UART_OPTION 0x30E8 -#define EXYNOS5420_PAD_RET_MMCA_OPTION 0x3108 -#define EXYNOS5420_PAD_RET_MMCB_OPTION 0x3128 -#define EXYNOS5420_PAD_RET_MMCC_OPTION 0x3148 -#define EXYNOS5420_PAD_RET_HSI_OPTION 0x3168 -#define EXYNOS5420_PAD_RET_SPI_OPTION 0x31C8 -#define EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION 0x31E8 -#define EXYNOS_PAD_RET_DRAM_OPTION 0x3008 -#define EXYNOS_PAD_RET_MAUDIO_OPTION 0x3028 -#define EXYNOS_PAD_RET_JTAG_OPTION 0x3048 -#define EXYNOS_PAD_RET_GPIO_OPTION 0x3108 -#define EXYNOS_PAD_RET_UART_OPTION 0x3128 -#define EXYNOS_PAD_RET_MMCA_OPTION 0x3148 -#define EXYNOS_PAD_RET_MMCB_OPTION 0x3168 -#define EXYNOS_PAD_RET_EBIA_OPTION 0x3188 -#define EXYNOS_PAD_RET_EBIB_OPTION 0x31A8 - -#define EXYNOS_PS_HOLD_CONTROL 0x330C - -/* For SYS_PWR_REG */ -#define EXYNOS_SYS_PWR_CFG BIT(0) - -#define EXYNOS5420_MFC_CONFIGURATION 0x4060 -#define EXYNOS5420_MFC_STATUS 0x4064 -#define EXYNOS5420_MFC_OPTION 0x4068 -#define EXYNOS5420_G3D_CONFIGURATION 0x4080 -#define EXYNOS5420_G3D_STATUS 0x4084 -#define EXYNOS5420_G3D_OPTION 0x4088 -#define EXYNOS5420_DISP0_CONFIGURATION 0x40A0 -#define EXYNOS5420_DISP0_STATUS 0x40A4 -#define EXYNOS5420_DISP0_OPTION 0x40A8 -#define EXYNOS5420_DISP1_CONFIGURATION 0x40C0 -#define EXYNOS5420_DISP1_STATUS 0x40C4 -#define EXYNOS5420_DISP1_OPTION 0x40C8 -#define EXYNOS5420_MAU_CONFIGURATION 0x40E0 -#define EXYNOS5420_MAU_STATUS 0x40E4 -#define EXYNOS5420_MAU_OPTION 0x40E8 -#define EXYNOS5420_FSYS2_OPTION 0x4168 -#define EXYNOS5420_PSGEN_OPTION 0x4188 - -/* For EXYNOS_CENTRAL_SEQ_OPTION */ -#define EXYNOS5_USE_STANDBYWFI_ARM_CORE0 BIT(16) -#define EXYNOS5_USE_STANDBYWFI_ARM_CORE1 BUT(17) -#define EXYNOS5_USE_STANDBYWFE_ARM_CORE0 BIT(24) -#define EXYNOS5_USE_STANDBYWFE_ARM_CORE1 BIT(25) - -#define EXYNOS5420_ARM_USE_STANDBY_WFI0 BIT(4) -#define EXYNOS5420_ARM_USE_STANDBY_WFI1 BIT(5) -#define EXYNOS5420_ARM_USE_STANDBY_WFI2 BIT(6) -#define EXYNOS5420_ARM_USE_STANDBY_WFI3 BIT(7) -#define EXYNOS5420_KFC_USE_STANDBY_WFI0 BIT(8) -#define EXYNOS5420_KFC_USE_STANDBY_WFI1 BIT(9) -#define EXYNOS5420_KFC_USE_STANDBY_WFI2 BIT(10) -#define EXYNOS5420_KFC_USE_STANDBY_WFI3 BIT(11) -#define EXYNOS5420_ARM_USE_STANDBY_WFE0 BIT(16) -#define EXYNOS5420_ARM_USE_STANDBY_WFE1 BIT(17) -#define EXYNOS5420_ARM_USE_STANDBY_WFE2 BIT(18) -#define EXYNOS5420_ARM_USE_STANDBY_WFE3 BIT(19) -#define EXYNOS5420_KFC_USE_STANDBY_WFE0 BIT(20) -#define EXYNOS5420_KFC_USE_STANDBY_WFE1 BIT(21) -#define EXYNOS5420_KFC_USE_STANDBY_WFE2 BIT(22) -#define EXYNOS5420_KFC_USE_STANDBY_WFE3 BIT(23) - -#define DUR_WAIT_RESET 0xF - -#define EXYNOS5420_USE_STANDBY_WFI_ALL (EXYNOS5420_ARM_USE_STANDBY_WFI0 \ - | EXYNOS5420_ARM_USE_STANDBY_WFI1 \ - | EXYNOS5420_ARM_USE_STANDBY_WFI2 \ - | EXYNOS5420_ARM_USE_STANDBY_WFI3 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI0 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI1 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI2 \ - | EXYNOS5420_KFC_USE_STANDBY_WFI3) - -#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c index 0b04b6b0fa30..8ef1f3ee4e98 100644 --- a/arch/arm/mach-exynos/s5p-dev-mfc.c +++ b/arch/arm/mach-exynos/s5p-dev-mfc.c @@ -9,7 +9,6 @@ */ #include <linux/kernel.h> -#include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/memblock.h> diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index c169cc3049aa..fee2b003e662 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -24,6 +24,8 @@ #include <linux/of_address.h> #include <linux/err.h> #include <linux/regulator/machine.h> +#include <linux/soc/samsung/exynos-pmu.h> +#include <linux/soc/samsung/exynos-regs-pmu.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -35,8 +37,6 @@ #include <plat/pm-common.h> #include "common.h" -#include "exynos-pmu.h" -#include "regs-pmu.h" #include "regs-srom.h" #define REG_TABLE_END (-1U) diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c index 16496a071ecb..cda330c93d61 100644 --- a/arch/arm/mach-imx/3ds_debugboard.c +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -94,8 +94,8 @@ static void mxc_expio_irq_handler(struct irq_desc *desc) /* irq = gpio irq number */ desc->irq_data.chip->irq_mask(&desc->irq_data); - imr_val = __raw_readw(brd_io + INTR_MASK_REG); - int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; + imr_val = imx_readw(brd_io + INTR_MASK_REG); + int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val; expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { @@ -117,17 +117,17 @@ static void expio_mask_irq(struct irq_data *d) u16 reg; u32 expio = d->hwirq; - reg = __raw_readw(brd_io + INTR_MASK_REG); + reg = imx_readw(brd_io + INTR_MASK_REG); reg |= (1 << expio); - __raw_writew(reg, brd_io + INTR_MASK_REG); + imx_writew(reg, brd_io + INTR_MASK_REG); } static void expio_ack_irq(struct irq_data *d) { u32 expio = d->hwirq; - __raw_writew(1 << expio, brd_io + INTR_RESET_REG); - __raw_writew(0, brd_io + INTR_RESET_REG); + imx_writew(1 << expio, brd_io + INTR_RESET_REG); + imx_writew(0, brd_io + INTR_RESET_REG); expio_mask_irq(d); } @@ -136,9 +136,9 @@ static void expio_unmask_irq(struct irq_data *d) u16 reg; u32 expio = d->hwirq; - reg = __raw_readw(brd_io + INTR_MASK_REG); + reg = imx_readw(brd_io + INTR_MASK_REG); reg &= ~(1 << expio); - __raw_writew(reg, brd_io + INTR_MASK_REG); + imx_writew(reg, brd_io + INTR_MASK_REG); } static struct irq_chip expio_irq_chip = { @@ -162,9 +162,9 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio) if (brd_io == NULL) return -ENOMEM; - if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || - (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || - (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { + if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || + (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || + (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { pr_info("3-Stack Debug board not detected\n"); iounmap(brd_io); brd_io = NULL; @@ -181,10 +181,10 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio) gpio_direction_input(intr_gpio); /* disable the interrupt and clear the status */ - __raw_writew(0, brd_io + INTR_MASK_REG); - __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); - __raw_writew(0, brd_io + INTR_RESET_REG); - __raw_writew(0x1F, brd_io + INTR_MASK_REG); + imx_writew(0, brd_io + INTR_MASK_REG); + imx_writew(0xFFFF, brd_io + INTR_RESET_REG); + imx_writew(0, brd_io + INTR_RESET_REG); + imx_writew(0x1F, brd_io + INTR_MASK_REG); irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); WARN_ON(irq_base < 0); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 15df34fbdf44..8973fae25436 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -2,7 +2,7 @@ menuconfig ARCH_MXC bool "Freescale i.MX family" depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M select ARCH_REQUIRE_GPIOLIB - select ARM_CPU_SUSPEND if PM + select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_IMX_GPT select GENERIC_IRQ_CHIP select PINCTRL @@ -511,6 +511,7 @@ config SOC_IMX53 config SOC_IMX6 bool + select ARM_CPU_SUSPEND if PM select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_GIC @@ -561,6 +562,7 @@ config SOC_IMX7D bool "i.MX7 Dual support" select PINCTRL_IMX7D select ARM_GIC + select HAVE_ARM_ARCH_TIMER select HAVE_IMX_ANATOP select HAVE_IMX_MMDC select HAVE_IMX_SRC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index fb689d813b09..9fbe624a5ef9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -3,7 +3,7 @@ obj-y := cpu.o system.o irq-common.o obj-$(CONFIG_SOC_IMX1) += mm-imx1.o obj-$(CONFIG_SOC_IMX21) += mm-imx21.o -obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o +obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 231bb250c571..649a84c251ad 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -129,7 +129,14 @@ void __init imx_init_revision_from_anatop(void) switch (digprog & 0xff) { case 0: - revision = IMX_CHIP_REVISION_1_0; + /* + * For i.MX6QP, most of the code for i.MX6Q can be resued, + * so internally, we identify it as i.MX6Q Rev 2.0 + */ + if (digprog >> 8 & 0x01) + revision = IMX_CHIP_REVISION_2_0; + else + revision = IMX_CHIP_REVISION_1_0; break; case 1: revision = IMX_CHIP_REVISION_1_1; @@ -151,7 +158,14 @@ void __init imx_init_revision_from_anatop(void) revision = IMX_CHIP_REVISION_1_5; break; default: - revision = IMX_CHIP_REVISION_UNKNOWN; + /* + * Fail back to return raw register value instead of 0xff. + * It will be easy to know version information in SOC if it + * can't be recognized by known version. And some chip's (i.MX7D) + * digprog value match linux version format, so it needn't map + * again and we can use register value directly. + */ + revision = digprog & 0xff; } mxc_set_cpu_type(digprog >> 16 & 0xff); diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 1a8932335b21..7fa176e792bd 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -66,12 +66,12 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type) return -EINVAL; if (irq < AVIC_NUM_IRQS / 2) { - irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); + irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); + imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); } else { irq -= AVIC_NUM_IRQS / 2; - irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); + irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); + imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); } return 0; @@ -94,8 +94,8 @@ static void avic_irq_suspend(struct irq_data *d) struct irq_chip_type *ct = gc->chip_types; int idx = d->hwirq >> 5; - avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask); - __raw_writel(gc->wake_active, avic_base + ct->regs.mask); + avic_saved_mask_reg[idx] = imx_readl(avic_base + ct->regs.mask); + imx_writel(gc->wake_active, avic_base + ct->regs.mask); } static void avic_irq_resume(struct irq_data *d) @@ -104,7 +104,7 @@ static void avic_irq_resume(struct irq_data *d) struct irq_chip_type *ct = gc->chip_types; int idx = d->hwirq >> 5; - __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); + imx_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); } #else @@ -140,7 +140,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) u32 nivector; do { - nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16; + nivector = imx_readl(avic_base + AVIC_NIVECSR) >> 16; if (nivector == 0xffff) break; @@ -164,16 +164,16 @@ void __init mxc_init_irq(void __iomem *irqbase) /* put the AVIC into the reset value with * all interrupts disabled */ - __raw_writel(0, avic_base + AVIC_INTCNTL); - __raw_writel(0x1f, avic_base + AVIC_NIMASK); + imx_writel(0, avic_base + AVIC_INTCNTL); + imx_writel(0x1f, avic_base + AVIC_NIMASK); /* disable all interrupts */ - __raw_writel(0, avic_base + AVIC_INTENABLEH); - __raw_writel(0, avic_base + AVIC_INTENABLEL); + imx_writel(0, avic_base + AVIC_INTENABLEH); + imx_writel(0, avic_base + AVIC_INTENABLEL); /* all IRQ no FIQ */ - __raw_writel(0, avic_base + AVIC_INTTYPEH); - __raw_writel(0, avic_base + AVIC_INTTYPEL); + imx_writel(0, avic_base + AVIC_INTTYPEH); + imx_writel(0, avic_base + AVIC_INTTYPEL); irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id()); WARN_ON(irq_base < 0); @@ -188,7 +188,7 @@ void __init mxc_init_irq(void __iomem *irqbase) /* Set default priority value (0) for all IRQ's */ for (i = 0; i < 8; i++) - __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); + imx_writel(0, avic_base + AVIC_NIPRIORITY(i)); set_handle_irq(avic_handle_irq); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 32b83f09da18..58a38464480d 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -66,6 +66,7 @@ void imx_gpc_check_dt(void); void imx_gpc_set_arm_power_in_lpm(bool power_off); void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); +void imx25_pm_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index fe8d36f7e30e..8d2ae4091465 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -39,8 +39,7 @@ static int mx27_read_cpu_rev(void) * the silicon revision very early we read it here to * avoid any further hooks */ - val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR - + SYS_CHIP_ID)); + val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID)); mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF); diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index fde1860a2521..3daf1959a2f0 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -39,7 +39,7 @@ static int mx31_read_cpu_rev(void) u32 i, srev; /* read SREV register from IIM module */ - srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); + srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); srev &= 0xff; for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index ec3aaa098c17..8a54234df23b 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -20,7 +20,7 @@ static int mx35_read_cpu_rev(void) { u32 rev; - rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); + rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); switch (rev) { case 0x00: return IMX_CHIP_REVISION_1_0; diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 5b0f752d5507..6a96b7cf468f 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -45,20 +45,20 @@ void __init imx_set_aips(void __iomem *base) * Set all MPROTx to be non-bufferable, trusted for R/W, * not forced to user-mode. */ - __raw_writel(0x77777777, base + 0x0); - __raw_writel(0x77777777, base + 0x4); + imx_writel(0x77777777, base + 0x0); + imx_writel(0x77777777, base + 0x4); /* * Set all OPACRx to be non-bufferable, to not require * supervisor privilege level for access, allow for * write access and untrusted master access. */ - __raw_writel(0x0, base + 0x40); - __raw_writel(0x0, base + 0x44); - __raw_writel(0x0, base + 0x48); - __raw_writel(0x0, base + 0x4C); - reg = __raw_readl(base + 0x50) & 0x00FFFFFF; - __raw_writel(reg, base + 0x50); + imx_writel(0x0, base + 0x40); + imx_writel(0x0, base + 0x44); + imx_writel(0x0, base + 0x48); + imx_writel(0x0, base + 0x4C); + reg = imx_readl(base + 0x50) & 0x00FFFFFF; + imx_writel(reg, base + 0x50); } void __init imx_aips_allow_unprivileged_access( diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c index 08ce20771bb3..fb9a73a57d00 100644 --- a/arch/arm/mach-imx/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -64,23 +64,23 @@ static inline void epit_irq_disable(void) { u32 val; - val = __raw_readl(timer_base + EPITCR); + val = imx_readl(timer_base + EPITCR); val &= ~EPITCR_OCIEN; - __raw_writel(val, timer_base + EPITCR); + imx_writel(val, timer_base + EPITCR); } static inline void epit_irq_enable(void) { u32 val; - val = __raw_readl(timer_base + EPITCR); + val = imx_readl(timer_base + EPITCR); val |= EPITCR_OCIEN; - __raw_writel(val, timer_base + EPITCR); + imx_writel(val, timer_base + EPITCR); } static void epit_irq_acknowledge(void) { - __raw_writel(EPITSR_OCIF, timer_base + EPITSR); + imx_writel(EPITSR_OCIF, timer_base + EPITSR); } static int __init epit_clocksource_init(struct clk *timer_clk) @@ -98,9 +98,9 @@ static int epit_set_next_event(unsigned long evt, { unsigned long tcmp; - tcmp = __raw_readl(timer_base + EPITCNR); + tcmp = imx_readl(timer_base + EPITCNR); - __raw_writel(tcmp - evt, timer_base + EPITCMPR); + imx_writel(tcmp - evt, timer_base + EPITCMPR); return 0; } @@ -213,11 +213,11 @@ void __init epit_timer_init(void __iomem *base, int irq) /* * Initialise to a known state (all timers off, and timing reset) */ - __raw_writel(0x0, timer_base + EPITCR); + imx_writel(0x0, timer_base + EPITCR); - __raw_writel(0xffffffff, timer_base + EPITLR); - __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, - timer_base + EPITCR); + imx_writel(0xffffffff, timer_base + EPITLR); + imx_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, + timer_base + EPITCR); /* init and register the timer to the framework */ epit_clocksource_init(timer_clk); diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index b5e976816b63..6c28d28b3c64 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> diag_reg_offset: .word g_diag_reg - . @@ -25,6 +26,7 @@ diag_reg_offset: .endm ENTRY(v7_secondary_startup) +ARM_BE8(setend be) @ go BE8 if entered LE set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 0b5ba4bf572a..3982e91b2f3e 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -57,10 +57,10 @@ void mxc_iomux_mode(unsigned int pin_mode) spin_lock(&gpio_mux_lock); - l = __raw_readl(reg); + l = imx_readl(reg); l &= ~(0xff << (field * 8)); l |= mode << (field * 8); - __raw_writel(l, reg); + imx_writel(l, reg); spin_unlock(&gpio_mux_lock); } @@ -82,10 +82,10 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) spin_lock(&gpio_mux_lock); - l = __raw_readl(reg); + l = imx_readl(reg); l &= ~(0x1ff << (field * 10)); l |= config << (field * 10); - __raw_writel(l, reg); + imx_writel(l, reg); spin_unlock(&gpio_mux_lock); } @@ -163,12 +163,12 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) u32 l; spin_lock(&gpio_mux_lock); - l = __raw_readl(IOMUXGPR); + l = imx_readl(IOMUXGPR); if (en) l |= gp; else l &= ~gp; - __raw_writel(l, IOMUXGPR); + imx_writel(l, IOMUXGPR); spin_unlock(&gpio_mux_lock); } diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c index ecd543664644..7aa90c863ad9 100644 --- a/arch/arm/mach-imx/iomux-v1.c +++ b/arch/arm/mach-imx/iomux-v1.c @@ -38,12 +38,12 @@ static unsigned imx_iomuxv1_numports; static inline unsigned long imx_iomuxv1_readl(unsigned offset) { - return __raw_readl(imx_iomuxv1_baseaddr + offset); + return imx_readl(imx_iomuxv1_baseaddr + offset); } static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset) { - __raw_writel(val, imx_iomuxv1_baseaddr + offset); + imx_writel(val, imx_iomuxv1_baseaddr + offset); } static inline void imx_iomuxv1_rmwl(unsigned offset, diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index a53b2e64f98d..ca59d5f2ec92 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -45,13 +45,13 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT; if (mux_ctrl_ofs) - __raw_writel(mux_mode, base + mux_ctrl_ofs); + imx_writel(mux_mode, base + mux_ctrl_ofs); if (sel_input_ofs) - __raw_writel(sel_input, base + sel_input_ofs); + imx_writel(sel_input, base + sel_input_ofs); if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) - __raw_writel(pad_ctrl, base + pad_ctrl_ofs); + imx_writel(pad_ctrl, base + pad_ctrl_ofs); return 0; } diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index f2060523ba48..eaee47a2fcc0 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -525,8 +525,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | - (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); + imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30), + mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c index 9379fd0a7b4d..32dcb5e99e23 100644 --- a/arch/arm/mach-imx/mach-imx25.c +++ b/arch/arm/mach-imx/mach-imx25.c @@ -41,6 +41,7 @@ static const char * const imx25_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .init_early = imx25_init_early, + .init_late = imx25_pm_init, .init_irq = mx25_init_irq, .dt_compat = imx25_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index b015129e4045..6883fbaf9484 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -40,11 +40,10 @@ static void __init imx51_ipu_mipi_setup(void) WARN_ON(!hsc_addr); /* setup MIPI module to legacy mode */ - __raw_writel(0xf00, hsc_addr); + imx_writel(0xf00, hsc_addr); /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ - __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff, - hsc_addr + 0x800); + imx_writel(imx_readl(hsc_addr + 0x800) | 0x30ff, hsc_addr + 0x800); iounmap(hsc_addr); } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 3878494bd118..cb27d566d5ab 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -266,8 +266,11 @@ static void __init imx6q_init_machine(void) { struct device *parent; - imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", - imx_get_soc_revision()); + if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0) + imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0); + else + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx_get_soc_revision()); parent = imx_soc_device_init(); if (parent == NULL) @@ -399,6 +402,7 @@ static void __init imx6q_init_irq(void) static const char * const imx6q_dt_compat[] __initconst = { "fsl,imx6dl", "fsl,imx6q", + "fsl,imx6qp", NULL, }; diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index f510c43981d3..a4c389eae31a 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -204,9 +204,9 @@ static struct i2c_board_info mx27ads_i2c_devices[] = { static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value) { if (value) - __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); + imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); else - __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); + imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); } static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) @@ -366,7 +366,7 @@ static void __init mx27ads_timer_init(void) { unsigned long fref = 26000000; - if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) + if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) fref = 27000000; mx27_clocks_init(fref); diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 2b147e4bf9c9..4f2c56d44ba1 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -160,8 +160,8 @@ static void mx31ads_expio_irq_handler(struct irq_desc *desc) u32 int_valid; u32 expio_irq; - imr_val = __raw_readw(PBC_INTMASK_SET_REG); - int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val; + imr_val = imx_readw(PBC_INTMASK_SET_REG); + int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val; expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { @@ -180,8 +180,8 @@ static void expio_mask_irq(struct irq_data *d) { u32 expio = d->hwirq; /* mask the interrupt */ - __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG); - __raw_readw(PBC_INTMASK_CLEAR_REG); + imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG); + imx_readw(PBC_INTMASK_CLEAR_REG); } /* @@ -192,7 +192,7 @@ static void expio_ack_irq(struct irq_data *d) { u32 expio = d->hwirq; /* clear the interrupt status */ - __raw_writew(1 << expio, PBC_INTSTATUS_REG); + imx_writew(1 << expio, PBC_INTSTATUS_REG); } /* @@ -203,7 +203,7 @@ static void expio_unmask_irq(struct irq_data *d) { u32 expio = d->hwirq; /* unmask the interrupt */ - __raw_writew(1 << expio, PBC_INTMASK_SET_REG); + imx_writew(1 << expio, PBC_INTMASK_SET_REG); } static struct irq_chip expio_irq_chip = { @@ -226,8 +226,8 @@ static void __init mx31ads_init_expio(void) mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); /* disable the interrupt and clear the status */ - __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); - __raw_writew(0xFFFF, PBC_INTSTATUS_REG); + imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); + imx_writew(0xFFFF, PBC_INTSTATUS_REG); irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); WARN_ON(irq_base < 0); diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index bb6f8a52a6b8..4f2d99888afd 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -509,7 +509,7 @@ static void mx31moboard_poweroff(void) mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST); - __raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); + imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); } static int mx31moboard_baseboard; diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 5c2764604727..34df64f133ed 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -190,9 +190,9 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); - __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); - __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); + imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); + imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); + imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index a5b1af6d7441..d32704256781 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -193,4 +193,9 @@ extern struct cpu_op *(*get_cpu_op)(int *op); #define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) #define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) +#define imx_readl readl_relaxed +#define imx_readw readw_relaxed +#define imx_writel writel_relaxed +#define imx_writew writew_relaxed + #endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c new file mode 100644 index 000000000000..8bba9fcd96f6 --- /dev/null +++ b/arch/arm/mach-imx/pm-imx25.c @@ -0,0 +1,37 @@ +/* + * Copyright 2016 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> + +static int imx25_suspend_enter(suspend_state_t state) +{ + if (!IS_ENABLED(CONFIG_PM)) + return 0; + + switch (state) { + case PM_SUSPEND_MEM: + cpu_do_idle(); + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct platform_suspend_ops imx25_suspend_ops = { + .enter = imx25_suspend_enter, + .valid = suspend_valid_only_mem, +}; + +void __init imx25_pm_init(void) +{ + suspend_set_ops(&imx25_suspend_ops); +} diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index 56d02d064fbf..43096c8990d4 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -19,9 +19,9 @@ static int mx27_suspend_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: /* Clear MPEN and SPEN to disable MPLL/SPLL */ - cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); cscr &= 0xFFFFFFFC; - __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); /* Executes WFI */ cpu_do_idle(); break; diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c index 6a07006ff0f4..94c0898751d8 100644 --- a/arch/arm/mach-imx/pm-imx3.c +++ b/arch/arm/mach-imx/pm-imx3.c @@ -22,14 +22,14 @@ */ void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode) { - int reg = __raw_readl(mx3_ccm_base + MXC_CCM_CCMR); + int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); reg &= ~MXC_CCM_CCMR_LPM_MASK; switch (mode) { case MX3_WAIT: if (cpu_is_mx35()) reg |= MXC_CCM_CCMR_LPM_WAIT_MX35; - __raw_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); + imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); break; default: pr_err("Unknown cpu power mode: %d\n", mode); diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 532d4b08276d..868781fd460c 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -153,15 +153,15 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) int stop_mode = 0; /* always allow platform to issue a deep sleep mode request */ - plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) & + plat_lpc = imx_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) & ~(MXC_CORTEXA8_PLAT_LPC_DSM); - ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) & + ccm_clpcr = imx_readl(ccm_base + MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK); - arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) & + arm_srpgcr = imx_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR); - empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) & + empgc0 = imx_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR); - empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) & + empgc1 = imx_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR); switch (mode) { @@ -196,17 +196,17 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) return; } - __raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC); - __raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR); - __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR); - __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR); + imx_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC); + imx_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR); + imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR); + imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR); if (stop_mode) { empgc0 |= MXC_SRPGCR_PCR; empgc1 |= MXC_SRPGCR_PCR; - __raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); + imx_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); + imx_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); } } @@ -228,8 +228,8 @@ static int mx5_suspend_enter(suspend_state_t state) flush_cache_all(); /*clear the EMPGC0/1 bits */ - __raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); + imx_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); + imx_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); if (imx5_suspend_in_ocram_fn) imx5_suspend_in_ocram_fn(suspend_ocram_base); diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 4470376af5f8..58924b3844df 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -561,13 +561,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) goto put_node; pl310_cache_map_failed: - iounmap(&pm_info->gpc_base.vbase); + iounmap(pm_info->gpc_base.vbase); gpc_map_failed: - iounmap(&pm_info->iomuxc_base.vbase); + iounmap(pm_info->iomuxc_base.vbase); iomuxc_map_failed: - iounmap(&pm_info->src_base.vbase); + iounmap(pm_info->src_base.vbase); src_map_failed: - iounmap(&pm_info->mmdc_base.vbase); + iounmap(pm_info->mmdc_base.vbase); put_node: of_node_put(node); diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 45f7f4e0a447..70b083fe934a 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -73,7 +73,7 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev, return 0; } -static struct reset_control_ops imx_src_ops = { +static const struct reset_control_ops imx_src_ops = { .reset = imx_src_reset_module, }; diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 51c35013b673..105d1ce4ed9d 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -54,7 +54,7 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) wcr_enable = (1 << 2); /* Assert SRS signal */ - __raw_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); /* * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be * written twice), we add another two writes to ensure there must be at @@ -62,8 +62,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) * the target check here, since the writes shouldn't be a huge burden * for other platforms. */ - __raw_writew(wcr_enable, wdog_base); - __raw_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); + imx_writew(wcr_enable, wdog_base); /* wait for reset to assert... */ mdelay(500); @@ -106,6 +106,9 @@ void __init imx_init_l2cache(void) goto out; } + if (readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN) + goto skip_if_enabled; + /* Configure the L2 PREFETCH and POWER registers */ val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); val |= 0x70800000; @@ -122,6 +125,7 @@ void __init imx_init_l2cache(void) val &= ~(1 << 30 | 1 << 23); writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); +skip_if_enabled: iounmap(l2x0_base); of_node_put(np); diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 4de65eeda1eb..ae23d50f7861 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -65,10 +65,10 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) return -EINVAL; mask = 1U << (irq & 0x1F); - value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask; + value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask; if (type) value &= ~mask; - __raw_writel(value, tzic_base + TZIC_INTSEC0(index)); + imx_writel(value, tzic_base + TZIC_INTSEC0(index)); return 0; } @@ -82,15 +82,15 @@ static void tzic_irq_suspend(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); int idx = d->hwirq >> 5; - __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); + imx_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); } static void tzic_irq_resume(struct irq_data *d) { int idx = d->hwirq >> 5; - __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)), - tzic_base + TZIC_WAKEUP0(idx)); + imx_writel(imx_readl(tzic_base + TZIC_ENSET0(idx)), + tzic_base + TZIC_WAKEUP0(idx)); } #else @@ -135,8 +135,8 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) handled = 0; for (i = 0; i < 4; i++) { - stat = __raw_readl(tzic_base + TZIC_HIPND(i)) & - __raw_readl(tzic_base + TZIC_INTSEC0(i)); + stat = imx_readl(tzic_base + TZIC_HIPND(i)) & + imx_readl(tzic_base + TZIC_INTSEC0(i)); while (stat) { handled = 1; @@ -166,18 +166,18 @@ void __init tzic_init_irq(void) /* put the TZIC into the reset value with * all interrupts disabled */ - i = __raw_readl(tzic_base + TZIC_INTCNTL); + i = imx_readl(tzic_base + TZIC_INTCNTL); - __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL); - __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK); - __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL); + imx_writel(0x80010001, tzic_base + TZIC_INTCNTL); + imx_writel(0x1f, tzic_base + TZIC_PRIOMASK); + imx_writel(0x02, tzic_base + TZIC_SYNCCTRL); for (i = 0; i < 4; i++) - __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); + imx_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); /* disable all interrupts */ for (i = 0; i < 4; i++) - __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); + imx_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); /* all IRQ no FIQ Warning :: No selection */ @@ -214,13 +214,13 @@ int tzic_enable_wake(void) { unsigned int i; - __raw_writel(1, tzic_base + TZIC_DSMINT); - if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0)) + imx_writel(1, tzic_base + TZIC_DSMINT); + if (unlikely(imx_readl(tzic_base + TZIC_DSMINT) == 0)) return -EAGAIN; for (i = 0; i < 4; i++) - __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)), - tzic_base + TZIC_WAKEUP0(i)); + imx_writel(imx_readl(tzic_base + TZIC_ENSET0(i)), + tzic_base + TZIC_WAKEUP0(i)); return 0; } diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c index a1b07eeaaf5b..b821e34474b6 100644 --- a/arch/arm/mach-mediatek/platsmp.c +++ b/arch/arm/mach-mediatek/platsmp.c @@ -44,13 +44,21 @@ static const struct mtk_smp_boot_info mtk_mt6589_boot = { { 0x38, 0x3c, 0x40 }, }; +static const struct mtk_smp_boot_info mtk_mt7623_boot = { + 0x10202000, 0x34, + { 0x534c4131, 0x4c415332, 0x41534c33 }, + { 0x38, 0x3c, 0x40 }, +}; + static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot }, { .compatible = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot }, + { .compatible = "mediatek,mt2701", .data = &mtk_mt8135_tz_boot }, }; static const struct of_device_id mtk_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot }, + { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot }, }; static void __iomem *mtk_smp_base; diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 7b02ed218a42..f6ba589cd312 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,6 +25,7 @@ #include <linux/device.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/omap-dma.h> #include <mach/tc.h> @@ -265,6 +266,42 @@ static const struct platform_device_info omap_dma_dev_info = { .num_res = 1, }; +/* OMAP730, OMAP850 */ +static const struct dma_slave_map omap7xx_sdma_map[] = { + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) }, + { "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) }, + { "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) }, + { "omap_udc", "rx0", SDMA_FILTER_PARAM(26) }, + { "omap_udc", "rx1", SDMA_FILTER_PARAM(27) }, + { "omap_udc", "rx2", SDMA_FILTER_PARAM(28) }, + { "omap_udc", "tx0", SDMA_FILTER_PARAM(29) }, + { "omap_udc", "tx1", SDMA_FILTER_PARAM(30) }, + { "omap_udc", "tx2", SDMA_FILTER_PARAM(31) }, +}; + +/* OMAP1510, OMAP1610*/ +static const struct dma_slave_map omap1xxx_sdma_map[] = { + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) }, + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) }, + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) }, + { "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) }, + { "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) }, + { "omap_udc", "rx0", SDMA_FILTER_PARAM(26) }, + { "omap_udc", "rx1", SDMA_FILTER_PARAM(27) }, + { "omap_udc", "rx2", SDMA_FILTER_PARAM(28) }, + { "omap_udc", "tx0", SDMA_FILTER_PARAM(29) }, + { "omap_udc", "tx1", SDMA_FILTER_PARAM(30) }, + { "omap_udc", "tx2", SDMA_FILTER_PARAM(31) }, + { "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) }, + { "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) }, +}; + static struct omap_system_dma_plat_info dma_plat_info __initdata = { .reg_map = reg_map, .channel_stride = 0x40, @@ -342,6 +379,14 @@ static int __init omap1_system_dma_init(void) p.dma_attr = d; p.errata = configure_dma_errata(); + if (cpu_is_omap7xx()) { + p.slave_map = omap7xx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map); + } else { + p.slave_map = omap1xxx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map); + } + ret = platform_device_add_data(pdev, &p, sizeof(p)); if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 1ed4be184a29..e58c13a9bea5 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/of.h> #include <linux/omap-dma.h> @@ -203,6 +204,108 @@ static unsigned configure_dma_errata(void) return errata; } +static const struct dma_slave_map omap24xx_sdma_map[] = { + { "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) }, + { "omap-aes", "tx", SDMA_FILTER_PARAM(9) }, + { "omap-aes", "rx", SDMA_FILTER_PARAM(10) }, + { "omap-sham", "rx", SDMA_FILTER_PARAM(13) }, + { "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) }, + { "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) }, + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) }, + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) }, + { "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) }, + { "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) }, + { "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) }, + { "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) }, + { "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) }, + { "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) }, + { "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) }, + { "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) }, + { "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) }, + { "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) }, + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) }, + { "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) }, + { "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) }, + { "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) }, + { "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) }, + { "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) }, + { "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) }, + { "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) }, + { "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) }, + { "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) }, + { "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) }, + { "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) }, + { "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) }, + { "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) }, + { "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) }, + { "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) }, + { "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) }, + { "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) }, + { "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) }, + { "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) }, + { "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) }, + { "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) }, + { "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) }, +}; + +static const struct dma_slave_map omap3xxx_sdma_map[] = { + { "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) }, + { "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) }, + { "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) }, + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) }, + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) }, + { "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) }, + { "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) }, + { "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) }, + { "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) }, + { "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) }, + { "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) }, + { "omap_i2c.3", "tx", SDMA_FILTER_PARAM(25) }, + { "omap_i2c.3", "rx", SDMA_FILTER_PARAM(26) }, + { "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) }, + { "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) }, + { "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) }, + { "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) }, + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) }, + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) }, + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) }, + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) }, + { "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) }, + { "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) }, + { "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) }, + { "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) }, + { "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) }, + { "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) }, + { "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) }, + { "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) }, + { "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) }, + { "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) }, + { "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) }, + { "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) }, + { "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) }, + { "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) }, + { "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) }, + { "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) }, + { "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) }, + { "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) }, + { "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) }, + { "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) }, + { "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) }, + { "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) }, + { "omap-aes", "tx", SDMA_FILTER_PARAM(65) }, + { "omap-aes", "rx", SDMA_FILTER_PARAM(66) }, + { "omap-sham", "rx", SDMA_FILTER_PARAM(69) }, + { "omap2_mcspi.3", "tx0", SDMA_FILTER_PARAM(70) }, + { "omap2_mcspi.3", "rx0", SDMA_FILTER_PARAM(71) }, + { "omap_hsmmc.2", "tx", SDMA_FILTER_PARAM(77) }, + { "omap_hsmmc.2", "rx", SDMA_FILTER_PARAM(78) }, + { "omap_uart.3", "tx", SDMA_FILTER_PARAM(81) }, + { "omap_uart.3", "rx", SDMA_FILTER_PARAM(82) }, +}; + static struct omap_system_dma_plat_info dma_plat_info __initdata = { .reg_map = reg_map, .channel_stride = 0x60, @@ -231,6 +334,20 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr; p.errata = configure_dma_errata(); + if (!of_have_populated_dt()) { + if (soc_is_omap24xx()) { + p.slave_map = omap24xx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap24xx_sdma_map); + } else if (soc_is_omap34xx() || soc_is_omap3630()) { + p.slave_map = omap3xxx_sdma_map; + p.slavecnt = ARRAY_SIZE(omap3xxx_sdma_map); + } else { + pr_err("%s: The legacy DMA map is not provided!\n", + __func__); + return -ENODEV; + } + } + pdev = omap_device_build(name, 0, oh, &p, sizeof(p)); if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s:%s.\n", diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index e97a894b5f88..97fd399202dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -1020,9 +1020,21 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { NULL, }; +static struct omap_hwmod_ocp_if *am43xx_rtc_hwmod_ocp_ifs[] __initdata = { + &am33xx_l4_wkup__rtc, + NULL, +}; + int __init am43xx_hwmod_init(void) { + int ret; + omap_hwmod_am43xx_reg(); omap_hwmod_init(); - return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs); + ret = omap_hwmod_register_links(am43xx_hwmod_ocp_ifs); + + if (!ret && of_machine_is_compatible("ti,am4372")) + ret = omap_hwmod_register_links(am43xx_rtc_hwmod_ocp_ifs); + + return ret; } diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index b61355e2a771..9442d89bd229 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -430,6 +430,67 @@ static struct omap_hwmod dra7xx_dma_system_hwmod = { }; /* + * 'tpcc' class + * + */ +static struct omap_hwmod_class dra7xx_tpcc_hwmod_class = { + .name = "tpcc", +}; + +static struct omap_hwmod dra7xx_tpcc_hwmod = { + .name = "tpcc", + .class = &dra7xx_tpcc_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET, + }, + }, +}; + +/* + * 'tptc' class + * + */ +static struct omap_hwmod_class dra7xx_tptc_hwmod_class = { + .name = "tptc", +}; + +/* tptc0 */ +static struct omap_hwmod dra7xx_tptc0_hwmod = { + .name = "tptc0", + .class = &dra7xx_tptc_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* tptc1 */ +static struct omap_hwmod dra7xx_tptc1_hwmod = { + .name = "tptc1", + .class = &dra7xx_tptc_hwmod_class, + .clkdm_name = "l3main1_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* * 'dss' class * */ @@ -1526,8 +1587,31 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { * */ +/* + * As noted in documentation for _reset() in omap_hwmod.c, the stock reset + * functionality of OMAP HWMOD layer does not deassert the hardreset lines + * associated with an IP automatically leaving the driver to handle that + * by itself. This does not work for PCIeSS which needs the reset lines + * deasserted for the driver to start accessing registers. + * + * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset + * lines after asserting them. + */ +static int dra7xx_pciess_reset(struct omap_hwmod *oh) +{ + int i; + + for (i = 0; i < oh->rst_lines_cnt; i++) { + omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name); + omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name); + } + + return 0; +} + static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { .name = "pcie", + .reset = dra7xx_pciess_reset, }; /* pcie1 */ @@ -2563,6 +2647,30 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l3_main_1 -> tpcc */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_tpcc_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + +/* l3_main_1 -> tptc0 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc0 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_tptc0_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + +/* l3_main_1 -> tptc1 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_tptc1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = { { .name = "family", @@ -3380,6 +3488,9 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__mcasp3, &dra7xx_gmac__mdio, &dra7xx_l4_cfg__dma_system, + &dra7xx_l3_main_1__tpcc, + &dra7xx_l3_main_1__tptc0, + &dra7xx_l3_main_1__tptc1, &dra7xx_l3_main_1__dss, &dra7xx_l3_main_1__dispc, &dra7xx_l3_main_1__hdmi, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index f8cc40021729..39736ad2a754 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -228,6 +228,42 @@ static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_med = { .user = OCP_USER_MPU, }; +/* RTC */ +static struct omap_hwmod_class_sysconfig ti81xx_rtc_sysc = { + .rev_offs = 0x74, + .sysc_offs = 0x78, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | + SIDLE_SMART | SIDLE_SMART_WKUP, + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class ti81xx_rtc_hwmod_class = { + .name = "rtc", + .sysc = &ti81xx_rtc_sysc, +}; + +struct omap_hwmod ti81xx_rtc_hwmod = { + .name = "rtc", + .class = &ti81xx_rtc_hwmod_class, + .clkdm_name = "alwon_l3s_clkdm", + .flags = HWMOD_NO_IDLEST, + .main_clk = "sysclk18_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_RTC_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if ti81xx_l4_ls__rtc = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &ti81xx_rtc_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + /* UART common */ static struct omap_hwmod_class_sysconfig uart_sysc = { .rev_offs = 0x50, @@ -1381,6 +1417,7 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__mcspi1, &dm814x_l4_ls__mmc1, &dm814x_l4_ls__mmc2, + &ti81xx_l4_ls__rtc, &dm81xx_alwon_l3_fast__tpcc, &dm81xx_alwon_l3_fast__tptc0, &dm81xx_alwon_l3_fast__tptc1, @@ -1420,6 +1457,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__gpio1, &dm81xx_l4_ls__gpio2, &dm81xx_l4_ls__elm, + &ti81xx_l4_ls__rtc, &dm816x_l4_ls__mmc1, &dm816x_l4_ls__timer1, &dm816x_l4_ls__timer2, diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 79ca3c3eb2af..70df8f6cddcc 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -181,6 +181,14 @@ static inline int is_ti ##class (void) \ return (GET_TI_CLASS == (id)) ? 1 : 0; \ } +#define GET_DRA_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_DRA_CLASS(class, id) \ +static inline int is_dra ##class (void) \ +{ \ + return (GET_DRA_CLASS == (id)) ? 1 : 0; \ +} + #define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) #define IS_OMAP_SUBCLASS(subclass, id) \ @@ -201,6 +209,12 @@ static inline int is_am ##subclass (void) \ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ } +#define IS_DRA_SUBCLASS(subclass, id) \ +static inline int is_dra ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_CLASS(44xx, 0x44) @@ -210,6 +224,7 @@ IS_AM_CLASS(33xx, 0x33) IS_AM_CLASS(43xx, 0x43) IS_TI_CLASS(81xx, 0x81) +IS_DRA_CLASS(7xx, 0x7) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) @@ -224,6 +239,8 @@ IS_TI_SUBCLASS(816x, 0x816) IS_TI_SUBCLASS(814x, 0x814) IS_AM_SUBCLASS(335x, 0x335) IS_AM_SUBCLASS(437x, 0x437) +IS_DRA_SUBCLASS(75x, 0x75) +IS_DRA_SUBCLASS(72x, 0x72) #define soc_is_omap24xx() 0 #define soc_is_omap242x() 0 @@ -397,9 +414,9 @@ IS_OMAP_TYPE(3430, 0x3430) #undef soc_is_dra7xx #undef soc_is_dra74x #undef soc_is_dra72x -#define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7")) -#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74")) -#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72")) +#define soc_is_dra7xx() is_dra7xx() +#define soc_is_dra74x() is_dra75x() +#define soc_is_dra72x() is_dra72x() #endif /* Various silicon revisions for omap2 */ diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f09683687963..7ee4652b4c61 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -297,7 +297,6 @@ config MACH_MAGICIAN config MACH_MIOA701 bool "Mitac Mio A701 Support" - select GPIO_SYSFS select IWMMXT select PXA27x help @@ -529,7 +528,7 @@ config MACH_TOSA config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" - depends on MACH_TOSA + depends on MACH_TOSA && NET select RFKILL help This is a simple driver that is able to control diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 37d8d85662f0..913a319c7b00 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -1203,6 +1203,7 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info) static struct mmp_dma_platdata pxa_dma_pdata = { .dma_channels = 0, + .nb_requestors = 0, }; static struct resource pxa_dma_resource[] = { @@ -1231,7 +1232,7 @@ static struct platform_device pxa2xx_pxa_dma = { .resource = pxa_dma_resource, }; -void __init pxa2xx_set_dmac_info(int nb_channels) +void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors) { pxa_dma_pdata.dma_channels = nb_channels; pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata); diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 0b00b226f54b..e838b11fb8c7 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -57,7 +57,7 @@ struct gpio_vbus_mach_info e7xx_udc_info = { .gpio_pullup_inverted = 1 }; -static struct platform_device e7xx_gpio_vbus = { +static struct platform_device e7xx_gpio_vbus __maybe_unused = { .name = "gpio-vbus", .id = -1, .dev = { @@ -126,7 +126,7 @@ struct resource eseries_tmio_resources[] = { }; /* Some e-series hardware cannot control the 32K clock */ -static void __init eseries_register_clks(void) +static void __init __maybe_unused eseries_register_clks(void) { clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768); } diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 6815a9357774..9c5b2fb054f9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -139,14 +139,14 @@ static void gumstix_setup_bt_clock(void) { int timeout = 500; - if (!(OSCC & OSCC_OOK)) + if (!(readl(OSCC) & OSCC_OOK)) pr_warn("32kHz clock was not on. Bootloader may need to be updated\n"); else return; - OSCC |= OSCC_OON; + writel(readl(OSCC) | OSCC_OON, OSCC); do { - if (OSCC & OSCC_OOK) + if (readl(OSCC) & OSCC_OOK) break; udelay(1); } while (--timeout); diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index f1dd62946b36..5537d5601d70 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -134,10 +134,10 @@ /* * PXA2xx specific Core clock definitions */ -#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ -#define CKEN __REG(0x41300004) /* Clock Enable Register */ -#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ +#define CCCR io_p2v(0x41300000) /* Core Clock Configuration Register */ +#define CCSR io_p2v(0x4130000C) /* Core Clock Status Register */ +#define CKEN io_p2v(0x41300004) /* Clock Enable Register */ +#define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index f4d48d20754e..888bf7ade15a 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -18,7 +18,7 @@ /* * Oscillator Configuration Register (OSCC) */ -#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ +#define OSCC io_p2v(0x41350000) /* Oscillator Configuration Register */ #define OSCC_PEN (1 << 11) /* 13MHz POUT */ diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h index 51558bcee999..3aab90d8d2b7 100644 --- a/arch/arm/mach-pxa/pm.h +++ b/arch/arm/mach-pxa/pm.h @@ -29,6 +29,9 @@ extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); extern void pxa_pm_finish(void); +extern const char pm_enter_standby_start[], pm_enter_standby_end[]; +extern int pxa3xx_finish_suspend(unsigned long); + /* NOTE: this is for PM debugging on Lubbock, it's really a big * ugly, but let's keep the crap minimum here, instead of direct * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index 8e0e62ccdced..f128133a8f30 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -19,42 +19,18 @@ #include "generic.h" #ifdef CONFIG_PXA3xx -static const struct of_dev_auxdata const pxa3xx_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000, "pxa2xx-uart.0", NULL), - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000, "pxa2xx-uart.1", NULL), - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL), - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL), - OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL), - OF_DEV_AUXDATA("intel,pxa3xx-gpio", 0x40e00000, "pxa3xx-gpio", NULL), - OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL), - OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL), - OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL), - OF_DEV_AUXDATA("marvell,pxa3xx-nand", 0x43100000, "pxa3xx-nand", NULL), - {} -}; - -static void __init pxa3xx_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - pxa3xx_auxdata_lookup, NULL); -} - static const char *const pxa3xx_dt_board_compat[] __initconst = { "marvell,pxa300", "marvell,pxa310", "marvell,pxa320", NULL, }; -#endif -#ifdef CONFIG_PXA3xx DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)") .map_io = pxa3xx_map_io, .init_irq = pxa3xx_dt_init_irq, .handle_irq = pxa3xx_handle_irq, - .init_time = pxa_timer_init, .restart = pxa_restart, - .init_machine = pxa3xx_dt_init, .dt_compat = pxa3xx_dt_board_compat, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index a177bf45feef..823504f48f80 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -206,7 +206,7 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - pxa2xx_set_dmac_info(16); + pxa2xx_set_dmac_info(16, 40); pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 8dfd1755c659..2eaa341dd3f8 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -132,7 +132,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) #ifndef CONFIG_IWMMXT u64 acc0; - asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mra %Q0, %R0, acc0" : "=r" (acc0)); #endif /* ensure voltage-change sequencer not initiated, which hangs */ @@ -151,7 +152,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: cpu_suspend(pwrmode, pxa27x_finish_suspend); #ifndef CONFIG_IWMMXT - asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mar acc0, %Q0, %R0" : "=r" (acc0)); #endif break; } @@ -309,7 +311,7 @@ static int __init pxa27x_init(void) if (!of_have_populated_dt()) { pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info); - pxa2xx_set_dmac_info(32); + pxa2xx_set_dmac_info(32, 75); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index a1c4c888f246..3c9184d1d6b9 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -68,7 +68,6 @@ static unsigned long wakeup_src; */ static void pxa3xx_cpu_standby(unsigned int pwrmode) { - extern const char pm_enter_standby_start[], pm_enter_standby_end[]; void (*fn)(unsigned int) = (void __force *)(sram + 0x8000); memcpy_toio(sram + 0x8000, pm_enter_standby_start, @@ -103,11 +102,10 @@ static void pxa3xx_cpu_pm_suspend(void) #ifndef CONFIG_IWMMXT u64 acc0; - asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mra %Q0, %R0, acc0" : "=r" (acc0)); #endif - extern int pxa3xx_finish_suspend(unsigned long); - /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); CKENB |= 1 << (CKEN_HSIO2 & 0x1f); @@ -133,7 +131,8 @@ static void pxa3xx_cpu_pm_suspend(void) AD3ER = 0; #ifndef CONFIG_IWMMXT - asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); + asm volatile(".arch_extension xscale\n\t" + "mar acc0, %Q0, %R0" : "=r" (acc0)); #endif } @@ -450,7 +449,7 @@ static int __init pxa3xx_init(void) if (of_have_populated_dt()) return 0; - pxa2xx_set_dmac_info(32); + pxa2xx_set_dmac_info(32, 100); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) return ret; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 825f903ab77e..d9578bc49fdc 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -201,7 +201,7 @@ static void __init spitz_scoop_init(void) } /* Power control is shared with between one of the CF slots and SD */ -static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) +static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) { unsigned short cpr; unsigned long flags; diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 515b7ddda8aa..3b94ecfb9426 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -910,7 +910,7 @@ static void __init zeus_map_io(void) PMCR = PSPR = 0; /* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */ - OSCC |= OSCC_OON; + writel(readl(OSCC) | OSCC_OON, OSCC); /* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...). * float chip selects and PCMCIA */ diff --git a/arch/arm/mach-s3c24xx/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h index 5dd1db4e2677..235c53647aa4 100644 --- a/arch/arm/mach-s3c24xx/include/mach/io.h +++ b/arch/arm/mach-s3c24xx/include/mach/io.h @@ -190,7 +190,7 @@ DECLARE_IO(int,l,"") result; \ }) -#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port))) +#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)0 + (port))) #define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) #define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h index 444793f0f5f1..adc39043aa21 100644 --- a/arch/arm/mach-s3c24xx/include/mach/map.h +++ b/arch/arm/mach-s3c24xx/include/mach/map.h @@ -14,13 +14,6 @@ #define __ASM_ARCH_MAP_H #include <plat/map-base.h> - -/* - * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x4000) - #include <plat/map-s3c.h> /* @@ -34,9 +27,6 @@ #define S3C2410_PA_MEMCTRL (0x48000000) #define S3C24XX_SZ_MEMCTRL SZ_1M -/* UARTs */ -#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) - /* Timers */ #define S3C2410_PA_TIMER (0x51000000) #define S3C24XX_SZ_TIMER SZ_1M @@ -157,7 +147,6 @@ #define S3C_PA_FB S3C2443_PA_FB #define S3C_PA_IIC S3C2410_PA_IIC -#define S3C_PA_UART S3C24XX_PA_UART #define S3C_PA_USBHOST S3C2410_PA_USBHOST #define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0 #define S3C_PA_HSMMC1 S3C2443_PA_HSMMC diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 7c0c420c3016..e5c1888fc67b 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -3,7 +3,8 @@ # # Licensed under GPLv2 menuconfig ARCH_S3C64XX - bool "Samsung S3C64XX" if ARCH_MULTI_V6 + bool "Samsung S3C64XX" + depends on ARCH_MULTI_V6 select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index aa0b1a177d3e..f2bc5c353119 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -6,28 +6,30 @@ config ARCH_SHMOBILE_MULTI config PM_RCAR bool - select PM_GENERIC_DOMAINS if PM + select PM + select PM_GENERIC_DOMAINS config PM_RMOBILE bool + select PM select PM_GENERIC_DOMAINS config ARCH_RCAR_GEN1 bool - select PM_RCAR if PM || SMP + select PM_RCAR select RENESAS_INTC_IRQPIN select SYS_SUPPORTS_SH_TMU config ARCH_RCAR_GEN2 bool - select PM_RCAR if PM || SMP + select PM_RCAR select RENESAS_IRQC select SYS_SUPPORTS_SH_CMT select PCI_DOMAINS if PCI config ARCH_RMOBILE bool - select PM_RMOBILE if PM + select PM_RMOBILE select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -55,7 +57,8 @@ config ARCH_EMEV2 config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" - select PM_GENERIC_DOMAINS if PM + select PM + select PM_GENERIC_DOMAINS select SYS_SUPPORTS_SH_MTU2 config ARCH_R8A73A4 diff --git a/arch/arm/mach-shmobile/emev2.h b/arch/arm/mach-shmobile/emev2.h new file mode 100644 index 000000000000..916d25f6780e --- /dev/null +++ b/arch/arm/mach-shmobile/emev2.h @@ -0,0 +1,6 @@ +#ifndef __ASM_EMEV2_H__ +#define __ASM_EMEV2_H__ + +extern const struct smp_operations emev2_smp_ops; + +#endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 10b7cb5dcb3a..3c99aaf65325 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -18,35 +18,17 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" - -static struct map_desc emev2_io_desc[] __initdata = { -#ifdef CONFIG_SMP - /* 2M mapping for SCU + L2 controller */ - { - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0x1e000000), - .length = SZ_2M, - .type = MT_DEVICE - }, -#endif -}; -static void __init emev2_map_io(void) -{ - iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); -} +#include "common.h" +#include "emev2.h" static const char *const emev2_boards_compat_dt[] __initconst = { "renesas,emev2", NULL, }; -extern const struct smp_operations emev2_smp_ops; - DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), - .map_io = emev2_map_io, .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .dt_compat = emev2_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 0c8f80c5b04d..db6dbfbaf9f1 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -23,41 +23,9 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/hardware/cache-l2x0.h> #include "common.h" -static struct map_desc r8a7740_io_desc[] __initdata = { - /* - * for CPGA/INTC/PFC - * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 160 << 20, - .type = MT_DEVICE_NONSHARED - }, -#ifdef CONFIG_CACHE_L2X0 - /* - * for l2x0_init() - * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000 - */ - { - .virtual = 0xf0002000, - .pfn = __phys_to_pfn(0xf0100000), - .length = PAGE_SIZE, - .type = MT_DEVICE_NONSHARED - }, -#endif -}; - -static void __init r8a7740_map_io(void) -{ - debug_ll_io_init(); - iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); -} - /* * r8a7740 chip has lasting errata on MERAM buffer. * this is work-around for it. @@ -110,10 +78,6 @@ static void __init r8a7740_generic_init(void) { r8a7740_meram_workaround(); -#ifdef CONFIG_CACHE_L2X0 - /* Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); -#endif of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -123,7 +87,8 @@ static const char *const r8a7740_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") - .map_io = r8a7740_map_io, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = r8a7740_generic_init, diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 4dfafd845452..3a732199cf5e 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -21,7 +21,9 @@ #include <linux/delay.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> + #include "common.h" +#include "emev2.h" #define EMEV2_SCU_BASE 0x1e000000 #define EMEV2_SMU_BASE 0xe0110000 diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c index f2ad7723d034..ceee47735eec 100644 --- a/arch/arm/mach-stm32/board-dt.c +++ b/arch/arm/mach-stm32/board-dt.c @@ -10,6 +10,7 @@ static const char *const stm32_compat[] __initconst = { "st,stm32f429", + "st,stm32f469", NULL }; diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index c2be98f38e73..3c156190a1d4 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -69,6 +69,7 @@ MACHINE_END static const char * const sun8i_board_dt_compat[] = { "allwinner,sun8i-a23", "allwinner,sun8i-a33", + "allwinner,sun8i-a83t", "allwinner,sun8i-h3", NULL, }; diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index e1cfc1d6e2f4..69141357afe8 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -30,7 +30,7 @@ * The secondary CPUs check this register from the boot ROM for the jump * destination. After that, it can be reused as a scratch register. */ -#define UNIPHIER_SBC_ROM_BOOT_RSV2 0x1208 +#define UNIPHIER_SMPCTRL_ROM_RSV2 0x208 static void __iomem *uniphier_smp_rom_boot_rsv2; static unsigned int uniphier_smp_max_cpus; @@ -98,16 +98,24 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus) phys_addr_t rom_rsv2_phys; int ret; - np = of_find_compatible_node(NULL, NULL, - "socionext,uniphier-system-bus-controller"); - ret = of_address_to_resource(np, 1, &res); - if (ret) { - pr_err("failed to get resource of system-bus-controller\n"); - return ret; + np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl"); + of_node_put(np); + ret = of_address_to_resource(np, 0, &res); + if (!ret) { + rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2; + } else { + /* try old binding too */ + np = of_find_compatible_node(NULL, NULL, + "socionext,uniphier-system-bus-controller"); + of_node_put(np); + ret = of_address_to_resource(np, 1, &res); + if (ret) { + pr_err("failed to get resource of SMP control\n"); + return ret; + } + rom_rsv2_phys = res.start + 0x1000 + UNIPHIER_SMPCTRL_ROM_RSV2; } - rom_rsv2_phys = res.start + UNIPHIER_SBC_ROM_BOOT_RSV2; - ret = uniphier_smp_copy_trampoline(rom_rsv2_phys); if (ret) return ret; diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 6f39d03cc27e..860ffb663f02 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -150,8 +150,6 @@ out: static void __init zynq_timer_init(void) { - zynq_early_slcr_init(); - zynq_clock_init(); of_clk_init(NULL); clocksource_probe(); @@ -186,6 +184,7 @@ static void __init zynq_map_io(void) static void __init zynq_irq_init(void) { + zynq_early_slcr_init(); irqchip_init(); } diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index 26320ebf3493..f0292a30e6f6 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -28,6 +28,7 @@ #define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset Control */ #define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */ #define SLCR_PSS_IDCODE 0x530 /* PS IDCODE */ +#define SLCR_L2C_RAM 0xA1C /* L2C_RAM in AR#54190 */ #define SLCR_UNLOCK_MAGIC 0xDF0D #define SLCR_A9_CPU_CLKSTOP 0x10 @@ -227,6 +228,9 @@ int __init zynq_early_slcr_init(void) /* unlock the SLCR so that registers can be changed */ zynq_slcr_unlock(); + /* See AR#54190 design advisory */ + regmap_update_bits(zynq_slcr_regmap, SLCR_L2C_RAM, 0x70707, 0x20202); + register_restart_handler(&zynq_slcr_restart_nb); pr_info("%s mapped to %p\n", np->name, zynq_slcr_base); diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h index 28848b344e2d..ceba3e4184fc 100644 --- a/arch/arm/plat-pxa/include/plat/dma.h +++ b/arch/arm/plat-pxa/include/plat/dma.h @@ -95,6 +95,6 @@ static inline int pxad_toggle_reserved_channel(int legacy_channel) } #endif -extern void __init pxa2xx_set_dmac_info(int nb_channels); +extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors); #endif /* __PLAT_DMA_H */ diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index efa6e85619ad..daf3db9f0058 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -422,8 +422,7 @@ static int s3c_adc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int s3c_adc_suspend(struct device *dev) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct adc_device *adc = platform_get_drvdata(pdev); unsigned long flags; u32 con; @@ -444,8 +443,7 @@ static int s3c_adc_suspend(struct device *dev) static int s3c_adc_resume(struct device *dev) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct adc_device *adc = platform_get_drvdata(pdev); enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data; int ret; diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h index c0c70a895ca8..6feedd47d875 100644 --- a/arch/arm/plat-samsung/include/plat/map-s3c.h +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -27,10 +27,6 @@ #define S3C2410_PA_UART (0x50000000) #define S3C24XX_PA_UART S3C2410_PA_UART -#ifndef S3C_UART_OFFSET -#define S3C_UART_OFFSET (0x400) -#endif - /* * GPIO ports * diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index f5cf2bd208e0..4ec9a7050185 100644 --- a/arch/arm/plat-samsung/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -23,7 +23,6 @@ #define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) #define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) #define S5P_VA_SCU S5P_VA_COREPERI(0x0) -#define S5P_VA_TWD S5P_VA_COREPERI(0x600) #define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) #define VA_VIC0 VA_VIC(0) @@ -31,10 +30,6 @@ #define VA_VIC2 VA_VIC(2) #define VA_VIC3 VA_VIC(3) -#ifndef S3C_UART_OFFSET -#define S3C_UART_OFFSET (0x400) -#endif - #include <plat/map-s3c.h> #endif /* __ASM_PLAT_MAP_S5P_H */ |