diff options
| author | Nishanth Menon <nm@ti.com> | 2023-06-02 23:49:35 +0200 |
|---|---|---|
| committer | Vignesh Raghavendra <vigneshr@ti.com> | 2023-06-15 07:35:48 +0200 |
| commit | 45299dd1991b496ddab5ab4a86d7ae601e0e4c7f (patch) | |
| tree | a43ff68c1de6d767db3630e5ca98ebad2705fcc0 /arch | |
| parent | arm64: dts: ti: k3-am69-sk: Enable mcu network port (diff) | |
| download | linux-45299dd1991b496ddab5ab4a86d7ae601e0e4c7f.tar.xz linux-45299dd1991b496ddab5ab4a86d7ae601e0e4c7f.zip | |
arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts
Add wakeup and MCU uart. This allows the device tree usage in
bootloader and firmwares that can configure the same appropriately.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602214937.2349545-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am69-sk.dts | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 21949106a107..125e4af174f6 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -21,6 +21,8 @@ }; aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; serial2 = &main_uart8; mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; @@ -142,6 +144,22 @@ }; &wkup_pmx2 { + wkup_uart0_pins_default: wkup-uart0-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-pins-default { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */ + J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + mcu_cpsw_pins_default: mcu-cpsw-pins-default { pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ @@ -167,6 +185,19 @@ }; }; +&wkup_uart0 { + /* Firmware usage */ + status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&mcu_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; +}; + &main_uart8 { status = "okay"; pinctrl-names = "default"; |