Merge tag 'qcom-dt-for-4.3' into v4.2-rc2

Qualcomm ARM Based Device Tree Updates for v4.3

* Switch to use pinctrl compatible for GPIOs
* Add RPM regulators for MSM8960
* Add SPI Ethernet support on MSM8960 CDP
* Add SMEM support along with dependencies
* Add PM8921 support for GPIO and MPP
* Fix GSBI cell index
* Switch to use real regulators on APQ8064 w/ SDCC

7 files changed, 523 insertions, 22 deletions

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 71512b3ca444..34ccb260f12a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -67,6 +67,12 @@
 					bias-pull-down;
 				};
 
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
 				pm8921_l23: l23 {
 					regulator-min-microvolt = <1700000>;
 					regulator-max-microvolt = <1900000>;
@@ -140,19 +146,33 @@
 			status = "okay";
 		};
 
+		/* on board fixed 3.3v supply */
+		v3p3_fixed: v3p3 {
+			compatible = "regulator-fixed";
+			regulator-name = "PCIE V3P3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
 			sdcc3: sdcc@12180000 {
 				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
 			};
 			/* WLAN */
 			sdcc4: sdcc@121c0000 {
 				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
+				vqmmc-supply = <&v3p3_fixed>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index a7c939ba8873..88d6655ddaf6 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -7,6 +7,7 @@
 
 	aliases {
 		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
 	};
 
 	soc {
@@ -73,6 +74,12 @@
 					bias-pull-down;
 				};
 
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
 				pm8921_l6: l6 {
 					regulator-min-microvolt = <2950000>;
 					regulator-max-microvolt = <2950000>;
@@ -84,9 +91,25 @@
 					regulator-max-microvolt = <1900000>;
 					bias-pull-down;
 				};
+
+				pm8921_lvs1: lvs1 {
+					bias-pull-down;
+				};
 			};
 		};
 
+		ext_3p3v: regulator-fixed@1 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "ext_3p3v";
+			regulator-type = "voltage";
+			startup-delay-us = <0>;
+			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
 		gsbi3: gsbi@16200000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
@@ -115,6 +138,18 @@
 			};
 		};
 
+		gsbi@16500000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@16540000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart_pins>;
+			};
+		};
+
 		gsbi@16600000 {
 			status = "ok";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
@@ -175,11 +210,14 @@
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
 			sdcc3: sdcc@12180000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l6>;
 				pinctrl-names	= "default";
 				pinctrl-0	= <&card_detect>;
 				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
@@ -187,6 +225,8 @@
 			/* WLAN */
 			sdcc4: sdcc@121c0000 {
 				status = "okay";
+				vmmc-supply = <&ext_3p3v>;
+				vqmmc-supply = <&pm8921_lvs1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index df2061ec630d..d2e94d647c27 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -6,7 +6,6 @@
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-
 / {
 	model = "Qualcomm APQ8064";
 	compatible = "qcom,apq8064";
@@ -127,6 +126,13 @@
 					function = "gsbi3";
 				};
 			};
+
+			uart_pins: uart_pins {
+				mux {
+					pins = "gpio14", "gpio15", "gpio16", "gpio17";
+					function = "gsbi6";
+				};
+			};
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -243,13 +249,13 @@
 		gsbi3: gsbi@16200000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
 			reg = <0x16200000 0x100>;
 			clocks = <&gcc GSBI3_H_CLK>;
 			clock-names = "iface";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-
 			i2c3: i2c@16280000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x16280000 0x1000>;
@@ -260,6 +266,28 @@
 			};
 		};
 
+		gsbi6: gsbi@16500000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <6>;
+			reg = <0x16500000 0x03>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi6_serial: serial@16540000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16540000 0x100>,
+				      <0x16500000 0x03>;
+				interrupts = <0 156 0x0>;
+				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
 		gsbi7: gsbi@16600000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
@@ -287,6 +315,53 @@
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8921";
+				interrupt-parent = <&tlmm_pinmux>;
+				interrupts = <74 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8921_gpio: gpio@150 {
+
+					compatible = "qcom,pm8921-gpio";
+					reg = <0x150>;
+					interrupts = <192 1>, <193 1>, <194 1>,
+						     <195 1>, <196 1>, <197 1>,
+						     <198 1>, <199 1>, <200 1>,
+						     <201 1>, <202 1>, <203 1>,
+						     <204 1>, <205 1>, <206 1>,
+						     <207 1>, <208 1>, <209 1>,
+						     <210 1>, <211 1>, <212 1>,
+						     <213 1>, <214 1>, <215 1>,
+						     <216 1>, <217 1>, <218 1>,
+						     <219 1>, <220 1>, <221 1>,
+						     <222 1>, <223 1>, <224 1>,
+						     <225 1>, <226 1>, <227 1>,
+						     <228 1>, <229 1>, <230 1>,
+						     <231 1>, <232 1>, <233 1>,
+						     <234 1>, <235 1>;
+
+					gpio-controller;
+					#gpio-cells = <2>;
+
+				};
+
+				pm8921_mpps: mpps@50 {
+					compatible = "qcom,pm8921-mpp";
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupts =
+					<128 1>, <129 1>, <130 1>, <131 1>,
+					<132 1>, <133 1>, <134 1>, <135 1>,
+					<136 1>, <137 1>, <138 1>, <139 1>;
+				};
+
+			};
 		};
 
 		gcc: clock-controller@900000 {
@@ -448,14 +523,6 @@
 		};
 
 		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
 		sdcc1bam:dma@12402000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
@@ -505,7 +572,6 @@
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
 				dma-names = "tx", "rx";
 			};
@@ -524,7 +590,6 @@
 				cap-mmc-highspeed;
 				max-frequency	= <192000000>;
 				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
 				dma-names = "tx", "rx";
 			};
@@ -542,8 +607,6 @@
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 				max-frequency	= <48000000>;
-				vmmc-supply = <&vsdcc_fixed>;
-				vqmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index e0b2ce2910e0..ef2fe72b54c9 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -67,15 +67,16 @@
 			cpu-offset = <0x40000>;
 		};
 
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
-			reg = <0x00800000 0x4000>;
+		tlmm: pinctrl@800000 {
+			compatible = "qcom,msm8660-pinctrl";
+			reg = <0x800000 0x4000>;
+
 			gpio-controller;
 			#gpio-cells = <2>;
-			ngpio = <173>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+
 		};
 
 		gcc: clock-controller@900000 {
@@ -115,7 +116,7 @@
 
 			pmicintc: pmic@0 {
 				compatible = "qcom,pm8058";
-				interrupt-parent = <&msmgpio>;
+				interrupt-parent = <&tlmm>;
 				interrupts = <88 8>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7f70fae90959..fad71d5527b0 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -26,6 +26,308 @@
 				status = "okay";
 			};
 		};
+
+		rpm@108000 {
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+				vdd_ncp-supply = <&pm8921_l6>;
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l21_l23_l29-supply = <&pm8921_s8>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				pm8921_s1: s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s2: s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8921_s3: s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				pm8921_s4: s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				pm8921_s7: s7 {
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s8: s8 {
+					regulator-always-on;
+					regulator-min-microvolt = <2050000>;
+					regulator-max-microvolt = <2050000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* PMOS LDO */
+				pm8921_l1: l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8921_l2: l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l3: l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				pm8921_l4: l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l6: l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l7: l7 {
+					regulator-always-on;
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l8: l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l9: l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l10: l10 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l11: l11 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8921_l12: l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l14: l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l15: l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l16: l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l17: l17 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l18: l18 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					bias-pull-down;
+				};
+
+				pm8921_l21: l21 {
+					regulator-min-microvolt = <1900000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8921_l22: l22 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <2750000>;
+					bias-pull-down;
+				};
+
+				pm8921_l23: l23 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l24: l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8921_l25: l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8921_lvs1: lvs1 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs2: lvs2 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs3: lvs3 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs4: lvs4 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs5: lvs5 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs7: lvs7 {
+					bias-pull-down;
+				};
+
+				pm8921_ncp: ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+
+		gsbi@16000000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_SPI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_default>;
+			spi@16080000 {
+				status = "ok";
+				eth@0 {
+					compatible = "micrel,ks8851";
+					reg = <0>;
+					interrupt-parent = <&msmgpio>;
+					interrupts = <90 8>;
+					spi-max-frequency = <5400000>;
+					vdd-supply = <&ext_l2>;
+					vdd-io-supply = <&pm8921_lvs6>;
+					reset-gpios = <&msmgpio 89 0>;
+				};
+			};
+		};
+
+		pinctrl@800000 {
+			spi1_default: spi1_default {
+				mux {
+					pins = "gpio6", "gpio7", "gpio9";
+					function = "gsbi1";
+				};
+
+				mosi {
+					pins = "gpio6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				miso {
+					pins = "gpio7";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs {
+					pins = "gpio8";
+					drive-strength = <12>;
+					bias-disable;
+					output-low;
+				};
+
+				clk {
+					pins = "gpio9";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		ext_l2: gpio-regulator@91 {
+			compatible = "regulator-fixed";
+			regulator-name = "ext_l2";
+			gpio = <&msmgpio 91 0>;
+			startup-delay-us = <10000>;
+			enable-active-high;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index a02b984cc68d..2096a94c9b52 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 
 / {
@@ -73,11 +74,10 @@
 			cpu-offset = <0x80000>;
 		};
 
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,msm8960-pinctrl";
 			gpio-controller;
 			#gpio-cells = <2>;
-			ngpio = <150>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -105,6 +105,24 @@
 			#reset-cells = <1>;
 		};
 
+		l2cc: clock-controller@2011000 {
+			compatible	= "syscon";
+			reg		= <0x2011000 0x1000>;
+		};
+
+		rpm@108000 {
+			compatible	= "qcom,rpm-msm8960";
+			reg		= <0x108000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+			};
+		};
+
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
@@ -253,5 +271,30 @@
 			compatible = "qcom,tcsr-msm8960", "syscon";
 			reg = <0x1a400000 0x100>;
 		};
+
+		gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16080000 0x1000>;
+				interrupts = <0 147 0>;
+				spi-max-frequency = <24000000>;
+				cs-gpios = <&msmgpio 8 0>;
+
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 37b47b5538b8..d7c99b894a49 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -9,6 +9,17 @@
 	compatible = "qcom,msm8974";
 	interrupt-parent = <&intc>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -220,6 +231,11 @@
 			reg = <0xfc400000 0x4000>;
 		};
 
+		tcsr_mutex_block: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
 		mmcc: clock-controller@fd8c0000 {
 			compatible = "qcom,mmcc-msm8974";
 			#clock-cells = <1>;
@@ -227,6 +243,22 @@
 			reg = <0xfd8c0000 0x6000>;
 		};
 
+		tcsr_mutex: tcsr-mutex {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_block 0 0x80>;
+
+			#hwlock-cells = <1>;
+		};
+
+		smem@fa00000 {
+			compatible = "qcom,smem";
+
+			memory-region = <&smem_region>;
+			reg = <0xfc428000 0x4000>;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
 		serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;