Merge branch 'acpica' into release

1 files changed, 410 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c
new file mode 100644
index 000000000000..26c49fff58da
--- /dev/null
+++ b/drivers/acpi/acpica/dscontrol.c
@@ -0,0 +1,410 @@
+/******************************************************************************
+ *
+ * Module Name: dscontrol - Support for execution control opcodes -
+ *                          if/else/while/return
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "amlcode.h"
+#include "acdispat.h"
+#include "acinterp.h"
+
+#define _COMPONENT          ACPI_DISPATCHER
+ACPI_MODULE_NAME("dscontrol")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_begin_control_op
+ *
+ * PARAMETERS:  walk_list       - The list that owns the walk stack
+ *              Op              - The control Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handles all control ops encountered during control method
+ *              execution.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
+			      union acpi_parse_object *op)
+{
+	acpi_status status = AE_OK;
+	union acpi_generic_state *control_state;
+
+	ACPI_FUNCTION_NAME(ds_exec_begin_control_op);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n",
+			  op, op->common.aml_opcode, walk_state));
+
+	switch (op->common.aml_opcode) {
+	case AML_WHILE_OP:
+
+		/*
+		 * If this is an additional iteration of a while loop, continue.
+		 * There is no need to allocate a new control state.
+		 */
+		if (walk_state->control_state) {
+			if (walk_state->control_state->control.
+			    aml_predicate_start ==
+			    (walk_state->parser_state.aml - 1)) {
+
+				/* Reset the state to start-of-loop */
+
+				walk_state->control_state->common.state =
+				    ACPI_CONTROL_CONDITIONAL_EXECUTING;
+				break;
+			}
+		}
+
+		/*lint -fallthrough */
+
+	case AML_IF_OP:
+
+		/*
+		 * IF/WHILE: Create a new control state to manage these
+		 * constructs. We need to manage these as a stack, in order
+		 * to handle nesting.
+		 */
+		control_state = acpi_ut_create_control_state();
+		if (!control_state) {
+			status = AE_NO_MEMORY;
+			break;
+		}
+		/*
+		 * Save a pointer to the predicate for multiple executions
+		 * of a loop
+		 */
+		control_state->control.aml_predicate_start =
+		    walk_state->parser_state.aml - 1;
+		control_state->control.package_end =
+		    walk_state->parser_state.pkg_end;
+		control_state->control.opcode = op->common.aml_opcode;
+
+		/* Push the control state on this walk's control stack */
+
+		acpi_ut_push_generic_state(&walk_state->control_state,
+					   control_state);
+		break;
+
+	case AML_ELSE_OP:
+
+		/* Predicate is in the state object */
+		/* If predicate is true, the IF was executed, ignore ELSE part */
+
+		if (walk_state->last_predicate) {
+			status = AE_CTRL_TRUE;
+		}
+
+		break;
+
+	case AML_RETURN_OP:
+
+		break;
+
+	default:
+		break;
+	}
+
+	return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_end_control_op
+ *
+ * PARAMETERS:  walk_list       - The list that owns the walk stack
+ *              Op              - The control Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handles all control ops encountered during control method
+ *              execution.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
+			    union acpi_parse_object * op)
+{
+	acpi_status status = AE_OK;
+	union acpi_generic_state *control_state;
+
+	ACPI_FUNCTION_NAME(ds_exec_end_control_op);
+
+	switch (op->common.aml_opcode) {
+	case AML_IF_OP:
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op));
+
+		/*
+		 * Save the result of the predicate in case there is an
+		 * ELSE to come
+		 */
+		walk_state->last_predicate =
+		    (u8)walk_state->control_state->common.value;
+
+		/*
+		 * Pop the control state that was created at the start
+		 * of the IF and free it
+		 */
+		control_state =
+		    acpi_ut_pop_generic_state(&walk_state->control_state);
+		acpi_ut_delete_generic_state(control_state);
+		break;
+
+	case AML_ELSE_OP:
+
+		break;
+
+	case AML_WHILE_OP:
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op));
+
+		control_state = walk_state->control_state;
+		if (control_state->common.value) {
+
+			/* Predicate was true, the body of the loop was just executed */
+
+			/*
+			 * This loop counter mechanism allows the interpreter to escape
+			 * possibly infinite loops. This can occur in poorly written AML
+			 * when the hardware does not respond within a while loop and the
+			 * loop does not implement a timeout.
+			 */
+			control_state->control.loop_count++;
+			if (control_state->control.loop_count >
+			    ACPI_MAX_LOOP_ITERATIONS) {
+				status = AE_AML_INFINITE_LOOP;
+				break;
+			}
+
+			/*
+			 * Go back and evaluate the predicate and maybe execute the loop
+			 * another time
+			 */
+			status = AE_CTRL_PENDING;
+			walk_state->aml_last_while =
+			    control_state->control.aml_predicate_start;
+			break;
+		}
+
+		/* Predicate was false, terminate this while loop */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "[WHILE_OP] termination! Op=%p\n", op));
+
+		/* Pop this control state and free it */
+
+		control_state =
+		    acpi_ut_pop_generic_state(&walk_state->control_state);
+		acpi_ut_delete_generic_state(control_state);
+		break;
+
+	case AML_RETURN_OP:
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "[RETURN_OP] Op=%p Arg=%p\n", op,
+				  op->common.value.arg));
+
+		/*
+		 * One optional operand -- the return value
+		 * It can be either an immediate operand or a result that
+		 * has been bubbled up the tree
+		 */
+		if (op->common.value.arg) {
+
+			/* Since we have a real Return(), delete any implicit return */
+
+			acpi_ds_clear_implicit_return(walk_state);
+
+			/* Return statement has an immediate operand */
+
+			status =
+			    acpi_ds_create_operands(walk_state,
+						    op->common.value.arg);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+
+			/*
+			 * If value being returned is a Reference (such as
+			 * an arg or local), resolve it now because it may
+			 * cease to exist at the end of the method.
+			 */
+			status =
+			    acpi_ex_resolve_to_value(&walk_state->operands[0],
+						     walk_state);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+
+			/*
+			 * Get the return value and save as the last result
+			 * value.  This is the only place where walk_state->return_desc
+			 * is set to anything other than zero!
+			 */
+			walk_state->return_desc = walk_state->operands[0];
+		} else if (walk_state->result_count) {
+
+			/* Since we have a real Return(), delete any implicit return */
+
+			acpi_ds_clear_implicit_return(walk_state);
+
+			/*
+			 * The return value has come from a previous calculation.
+			 *
+			 * If value being returned is a Reference (such as
+			 * an arg or local), resolve it now because it may
+			 * cease to exist at the end of the method.
+			 *
+			 * Allow references created by the Index operator to return
+			 * unchanged.
+			 */
+			if ((ACPI_GET_DESCRIPTOR_TYPE
+			     (walk_state->results->results.obj_desc[0]) ==
+			     ACPI_DESC_TYPE_OPERAND)
+			    && ((walk_state->results->results.obj_desc[0])->
+				common.type == ACPI_TYPE_LOCAL_REFERENCE)
+			    && ((walk_state->results->results.obj_desc[0])->
+				reference.class != ACPI_REFCLASS_INDEX)) {
+				status =
+				    acpi_ex_resolve_to_value(&walk_state->
+							     results->results.
+							     obj_desc[0],
+							     walk_state);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+			}
+
+			walk_state->return_desc =
+			    walk_state->results->results.obj_desc[0];
+		} else {
+			/* No return operand */
+
+			if (walk_state->num_operands) {
+				acpi_ut_remove_reference(walk_state->
+							 operands[0]);
+			}
+
+			walk_state->operands[0] = NULL;
+			walk_state->num_operands = 0;
+			walk_state->return_desc = NULL;
+		}
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "Completed RETURN_OP State=%p, RetVal=%p\n",
+				  walk_state, walk_state->return_desc));
+
+		/* End the control method execution right now */
+
+		status = AE_CTRL_TERMINATE;
+		break;
+
+	case AML_NOOP_OP:
+
+		/* Just do nothing! */
+		break;
+
+	case AML_BREAK_POINT_OP:
+
+		/*
+		 * Set the single-step flag. This will cause the debugger (if present)
+		 * to break to the console within the AML debugger at the start of the
+		 * next AML instruction.
+		 */
+		ACPI_DEBUGGER_EXEC(acpi_gbl_cm_single_step = TRUE);
+		ACPI_DEBUGGER_EXEC(acpi_os_printf
+				   ("**break** Executed AML BreakPoint opcode\n"));
+
+		/* Call to the OSL in case OS wants a piece of the action */
+
+		status = acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
+					"Executed AML Breakpoint opcode");
+		break;
+
+	case AML_BREAK_OP:
+	case AML_CONTINUE_OP:	/* ACPI 2.0 */
+
+		/* Pop and delete control states until we find a while */
+
+		while (walk_state->control_state &&
+		       (walk_state->control_state->control.opcode !=
+			AML_WHILE_OP)) {
+			control_state =
+			    acpi_ut_pop_generic_state(&walk_state->
+						      control_state);
+			acpi_ut_delete_generic_state(control_state);
+		}
+
+		/* No while found? */
+
+		if (!walk_state->control_state) {
+			return (AE_AML_NO_WHILE);
+		}
+
+		/* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */
+
+		walk_state->aml_last_while =
+		    walk_state->control_state->control.package_end;
+
+		/* Return status depending on opcode */
+
+		if (op->common.aml_opcode == AML_BREAK_OP) {
+			status = AE_CTRL_BREAK;
+		} else {
+			status = AE_CTRL_CONTINUE;
+		}
+		break;
+
+	default:
+
+		ACPI_ERROR((AE_INFO, "Unknown control opcode=0x%X Op=%p",
+			    op->common.aml_opcode, op));
+
+		status = AE_AML_BAD_OPCODE;
+		break;
+	}
+
+	return (status);
+}