diff options
author | Mika Westerberg <mika.westerberg@linux.intel.com> | 2017-06-05 10:39:19 +0200 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2017-06-12 14:58:39 +0200 |
commit | 97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f (patch) | |
tree | e9ae63beb8b3e3b2cbf1a07c91b31c19c4d55a76 /drivers/acpi/acpica | |
parent | ACPICA: ACPI 6.2: Add support for PinFunction() resource (diff) | |
download | linux-97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f.tar.xz linux-97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f.zip |
ACPICA: ACPI 6.2: Add support for PinConfig() resource
ACPICA commit a06fdba686cefccd5dd5b93b52fa0f1e3f984906
ACPI 6.2 introduced a new resource that is used to specify fine-grained
configuration of a pin or set of pins used by a device. The ASL syntax of
this new resource looks like:
PinConfig (Shared/Exclusive, PinConfigType, PinConfigValue,
ResourceSource, ResourceSourceIndex, ResourceUsage,
DescriptorName, Vendordata) {Pin List}
PinConfigType is an integer with following accepted values:
0x00 (Default) - No configuration is applied to the pin
0x01 (Bias Pull-up) - Pin is pulled up using certain size resistor
0x02 (Bias Pull-down) - Pin is pulled down using certain size resistor
0x03 (Bias Default) - Set to default biasing
0x04 (Bias Disable) - All bias settings will be disabled
0x05 (Bias High Impedance) - Configure the pin as hi_z
0x06 (Bias Bus Hold) - Configure the pin in a weak latch state where
it drives the last value on a tristate bus
0x07 (Drive Open Drain) - Configure the pin into open drain state
0x08 (Drive Open Source) - Configure the pin into open source state
0x09 (Drive Push Pull) - Configure the pin into push-pull state
0x0a (Drive Strength) - How much the pin can supply current
0x0b (Slew Rate) - Configure slew rate of the pin
0x0c (Input Debounce) - Enable input debouncer for the pin
0x0d (Input Schmitt Trigger) - Enable schmitt trigger for the pin
0x0e - 0x7f - Reserved
0x80 - 0xff - Vendor defined types
The PinConfigValue depends on the type and is expressed as units
suitable for that type (for example bias uses Ohms).
Link: https://github.com/acpica/acpica/commit/a06fdba6
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/acpi/acpica')
-rw-r--r-- | drivers/acpi/acpica/aclocal.h | 3 | ||||
-rw-r--r-- | drivers/acpi/acpica/acresrc.h | 2 | ||||
-rw-r--r-- | drivers/acpi/acpica/acutils.h | 1 | ||||
-rw-r--r-- | drivers/acpi/acpica/amlresrc.h | 23 | ||||
-rw-r--r-- | drivers/acpi/acpica/rscalc.c | 31 | ||||
-rw-r--r-- | drivers/acpi/acpica/rsdumpinfo.c | 25 | ||||
-rw-r--r-- | drivers/acpi/acpica/rsinfo.c | 7 | ||||
-rw-r--r-- | drivers/acpi/acpica/rsserial.c | 78 | ||||
-rw-r--r-- | drivers/acpi/acpica/utresrc.c | 23 |
9 files changed, 190 insertions, 3 deletions
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index b73db9bdfa69..115cadd54471 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -1144,7 +1144,8 @@ struct acpi_port_info { #define ACPI_RESOURCE_NAME_GPIO 0x8C #define ACPI_RESOURCE_NAME_PIN_FUNCTION 0x8D #define ACPI_RESOURCE_NAME_SERIAL_BUS 0x8E -#define ACPI_RESOURCE_NAME_LARGE_MAX 0x8E +#define ACPI_RESOURCE_NAME_PIN_CONFIG 0x8F +#define ACPI_RESOURCE_NAME_LARGE_MAX 0x8F /***************************************************************************** * diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h index bd238b410c42..61d2ef38a8ed 100644 --- a/drivers/acpi/acpica/acresrc.h +++ b/drivers/acpi/acpica/acresrc.h @@ -330,6 +330,7 @@ extern struct acpi_rsconvert_info acpi_rs_convert_i2c_serial_bus[]; extern struct acpi_rsconvert_info acpi_rs_convert_spi_serial_bus[]; extern struct acpi_rsconvert_info acpi_rs_convert_uart_serial_bus[]; extern struct acpi_rsconvert_info acpi_rs_convert_pin_function[]; +extern struct acpi_rsconvert_info acpi_rs_convert_pin_config[]; /* These resources require separate get/set tables */ @@ -380,6 +381,7 @@ extern struct acpi_rsdump_info acpi_rs_dump_i2c_serial_bus[]; extern struct acpi_rsdump_info acpi_rs_dump_spi_serial_bus[]; extern struct acpi_rsdump_info acpi_rs_dump_uart_serial_bus[]; extern struct acpi_rsdump_info acpi_rs_dump_general_flags[]; +extern struct acpi_rsdump_info acpi_rs_dump_pin_config[]; #endif #endif /* __ACRESRC_H__ */ diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 6f28cfae2212..2a3cc4296481 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -85,6 +85,7 @@ extern const char *acpi_gbl_bpb_decode[]; extern const char *acpi_gbl_sb_decode[]; extern const char *acpi_gbl_fc_decode[]; extern const char *acpi_gbl_pt_decode[]; +extern const char *acpi_gbl_ptyp_decode[]; #endif /* diff --git a/drivers/acpi/acpica/amlresrc.h b/drivers/acpi/acpica/amlresrc.h index e34396cab75d..6f8d8f903ffd 100644 --- a/drivers/acpi/acpica/amlresrc.h +++ b/drivers/acpi/acpica/amlresrc.h @@ -85,6 +85,8 @@ #define ACPI_RESTAG_PHASE "_PHA" #define ACPI_RESTAG_PIN "_PIN" #define ACPI_RESTAG_PINCONFIG "_PPI" +#define ACPI_RESTAG_PINCONFIG_TYPE "_TYP" +#define ACPI_RESTAG_PINCONFIG_VALUE "_VAL" #define ACPI_RESTAG_POLARITY "_POL" #define ACPI_RESTAG_REGISTERBITOFFSET "_RBO" #define ACPI_RESTAG_REGISTERBITWIDTH "_RBW" @@ -425,6 +427,26 @@ struct aml_resource_pin_function { #define AML_RESOURCE_PIN_FUNCTION_REVISION 1 /* ACPI 6.2 */ +struct aml_resource_pin_config { + AML_RESOURCE_LARGE_HEADER_COMMON u8 revision_id; + u16 flags; + u8 pin_config_type; + u32 pin_config_value; + u16 pin_table_offset; + u8 res_source_index; + u16 res_source_offset; + u16 vendor_offset; + u16 vendor_length; + /* + * Optional fields follow immediately: + * 1) PIN list (Words) + * 2) Resource Source String + * 3) Vendor Data bytes + */ +}; + +#define AML_RESOURCE_PIN_CONFIG_REVISION 1 /* ACPI 6.2 */ + /* restore default alignment */ #pragma pack() @@ -468,6 +490,7 @@ union aml_resource { struct aml_resource_uart_serialbus uart_serial_bus; struct aml_resource_common_serialbus common_serial_bus; struct aml_resource_pin_function pin_function; + struct aml_resource_pin_config pin_config; /* Utility overlays */ diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index 167ece92fb55..9fdc9c187818 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -375,6 +375,20 @@ acpi_rs_get_aml_length(struct acpi_resource *resource, break; + case ACPI_RESOURCE_TYPE_PIN_CONFIG: + + total_size = (acpi_rs_length)(total_size + + (resource->data. + pin_config. + pin_table_length * 2) + + resource->data.pin_config. + resource_source. + string_length + + resource->data.pin_config. + vendor_length); + + break; + default: break; @@ -581,6 +595,23 @@ acpi_rs_get_list_length(u8 *aml_buffer, minimum_aml_resource_length; break; + case ACPI_RESOURCE_NAME_PIN_CONFIG: + + /* Vendor data is optional */ + + if (aml_resource->pin_config.vendor_length) { + extra_struct_bytes += + aml_resource->pin_config.vendor_offset - + aml_resource->pin_config.pin_table_offset + + aml_resource->pin_config.vendor_length; + } else { + extra_struct_bytes += + aml_resource->large_header.resource_length + + sizeof(struct aml_resource_large_header) - + aml_resource->pin_config.pin_table_offset; + } + break; + default: break; diff --git a/drivers/acpi/acpica/rsdumpinfo.c b/drivers/acpi/acpica/rsdumpinfo.c index afc0441f7dfb..e68472248fff 100644 --- a/drivers/acpi/acpica/rsdumpinfo.c +++ b/drivers/acpi/acpica/rsdumpinfo.c @@ -337,6 +337,31 @@ struct acpi_rsdump_info acpi_rs_dump_pin_function[10] = { "VendorData", NULL}, }; +struct acpi_rsdump_info acpi_rs_dump_pin_config[11] = { + {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_pin_config), + "PinConfig", NULL}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(pin_config.revision_id), "RevisionId", + NULL}, + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(pin_config.producer_consumer), + "ProducerConsumer", acpi_gbl_consume_decode}, + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(pin_config.sharable), "Sharing", + acpi_gbl_shr_decode}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(pin_config.pin_config_type), + "PinConfigType", NULL}, + {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(pin_config.pin_config_value), + "PinConfigValue", NULL}, + {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(pin_config.resource_source), + "ResourceSource", NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(pin_config.pin_table_length), + "PinTableLength", NULL}, + {ACPI_RSD_WORDLIST, ACPI_RSD_OFFSET(pin_config.pin_table), "PinTable", + NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(pin_config.vendor_length), + "VendorLength", NULL}, + {ACPI_RSD_SHORTLISTX, ACPI_RSD_OFFSET(pin_config.vendor_data), + "VendorData", NULL}, +}; + struct acpi_rsdump_info acpi_rs_dump_fixed_dma[4] = { {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_dma), "FixedDma", NULL}, diff --git a/drivers/acpi/acpica/rsinfo.c b/drivers/acpi/acpica/rsinfo.c index e7310712b86f..5634bd65a745 100644 --- a/drivers/acpi/acpica/rsinfo.c +++ b/drivers/acpi/acpica/rsinfo.c @@ -81,6 +81,7 @@ struct acpi_rsconvert_info *acpi_gbl_set_resource_dispatch[] = { acpi_rs_convert_fixed_dma, /* 0x12, ACPI_RESOURCE_TYPE_FIXED_DMA */ NULL, /* 0x13, ACPI_RESOURCE_TYPE_SERIAL_BUS - Use subtype table below */ acpi_rs_convert_pin_function, /* 0x14, ACPI_RESOURCE_TYPE_PIN_FUNCTION */ + acpi_rs_convert_pin_config, /* 0x15, ACPI_RESOURCE_TYPE_PIN_CONFIG */ }; /* Dispatch tables for AML-to-resource (Get Resource) conversion functions */ @@ -122,6 +123,7 @@ struct acpi_rsconvert_info *acpi_gbl_get_resource_dispatch[] = { acpi_rs_convert_gpio, /* 0x0C, ACPI_RESOURCE_NAME_GPIO */ acpi_rs_convert_pin_function, /* 0x0D, ACPI_RESOURCE_NAME_PIN_FUNCTION */ NULL, /* 0x0E, ACPI_RESOURCE_NAME_SERIAL_BUS - Use subtype table below */ + acpi_rs_convert_pin_config, /* 0x0F, ACPI_RESOURCE_NAME_PIN_CONFIG */ }; /* Subtype table for serial_bus -- I2C, SPI, and UART */ @@ -159,6 +161,7 @@ struct acpi_rsdump_info *acpi_gbl_dump_resource_dispatch[] = { acpi_rs_dump_fixed_dma, /* ACPI_RESOURCE_TYPE_FIXED_DMA */ NULL, /* ACPI_RESOURCE_TYPE_SERIAL_BUS */ acpi_rs_dump_pin_function, /* ACPI_RESOURCE_TYPE_PIN_FUNCTION */ + acpi_rs_dump_pin_config, /* ACPI_RESOURCE_TYPE_PIN_CONFIG */ }; struct acpi_rsdump_info *acpi_gbl_dump_serial_bus_dispatch[] = { @@ -196,6 +199,7 @@ const u8 acpi_gbl_aml_resource_sizes[] = { sizeof(struct aml_resource_fixed_dma), /* ACPI_RESOURCE_TYPE_FIXED_DMA */ sizeof(struct aml_resource_common_serialbus), /* ACPI_RESOURCE_TYPE_SERIAL_BUS */ sizeof(struct aml_resource_pin_function), /* ACPI_RESOURCE_TYPE_PIN_FUNCTION */ + sizeof(struct aml_resource_pin_config), /* ACPI_RESOURCE_TYPE_PIN_CONFIG */ }; const u8 acpi_gbl_resource_struct_sizes[] = { @@ -234,7 +238,8 @@ const u8 acpi_gbl_resource_struct_sizes[] = { ACPI_RS_SIZE(struct acpi_resource_extended_address64), ACPI_RS_SIZE(struct acpi_resource_gpio), ACPI_RS_SIZE(struct acpi_resource_pin_function), - ACPI_RS_SIZE(struct acpi_resource_common_serialbus) + ACPI_RS_SIZE(struct acpi_resource_common_serialbus), + ACPI_RS_SIZE(struct acpi_resource_pin_config), }; const u8 acpi_gbl_aml_resource_serial_bus_sizes[] = { diff --git a/drivers/acpi/acpica/rsserial.c b/drivers/acpi/acpica/rsserial.c index fd11d0c10c17..01bc851283d5 100644 --- a/drivers/acpi/acpica/rsserial.c +++ b/drivers/acpi/acpica/rsserial.c @@ -534,3 +534,81 @@ struct acpi_rsconvert_info acpi_rs_convert_uart_serial_bus[23] = { AML_OFFSET(uart_serial_bus.default_baud_rate), 1}, }; + +/******************************************************************************* + * + * acpi_rs_convert_pin_config + * + ******************************************************************************/ + +struct acpi_rsconvert_info acpi_rs_convert_pin_config[14] = { + {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_PIN_CONFIG, + ACPI_RS_SIZE(struct acpi_resource_pin_config), + ACPI_RSC_TABLE_SIZE(acpi_rs_convert_pin_config)}, + + {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_PIN_CONFIG, + sizeof(struct aml_resource_pin_config), + 0}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.pin_config.revision_id), + AML_OFFSET(pin_config.revision_id), + 1}, + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.pin_config.sharable), + AML_OFFSET(pin_config.flags), + 0}, + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.pin_config.producer_consumer), + AML_OFFSET(pin_config.flags), + 1}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.pin_config.pin_config_type), + AML_OFFSET(pin_config.pin_config_type), + 1}, + + {ACPI_RSC_MOVE32, ACPI_RS_OFFSET(data.pin_config.pin_config_value), + AML_OFFSET(pin_config.pin_config_value), + 1}, + + /* Pin Table */ + + /* + * It is OK to use GPIO operations here because none of them refer GPIO + * structures directly but instead use offsets given here. + */ + + {ACPI_RSC_COUNT_GPIO_PIN, + ACPI_RS_OFFSET(data.pin_config.pin_table_length), + AML_OFFSET(pin_config.pin_table_offset), + AML_OFFSET(pin_config.res_source_offset)}, + + {ACPI_RSC_MOVE_GPIO_PIN, ACPI_RS_OFFSET(data.pin_config.pin_table), + AML_OFFSET(pin_config.pin_table_offset), + 0}, + + /* Resource Source */ + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.pin_config.resource_source.index), + AML_OFFSET(pin_config.res_source_index), + 1}, + + {ACPI_RSC_COUNT_GPIO_RES, + ACPI_RS_OFFSET(data.pin_config.resource_source.string_length), + AML_OFFSET(pin_config.res_source_offset), + AML_OFFSET(pin_config.vendor_offset)}, + + {ACPI_RSC_MOVE_GPIO_RES, + ACPI_RS_OFFSET(data.pin_config.resource_source.string_ptr), + AML_OFFSET(pin_config.res_source_offset), + 0}, + + /* Vendor Data */ + + {ACPI_RSC_COUNT_GPIO_VEN, ACPI_RS_OFFSET(data.pin_config.vendor_length), + AML_OFFSET(pin_config.vendor_length), + 1}, + + {ACPI_RSC_MOVE_GPIO_RES, ACPI_RS_OFFSET(data.pin_config.vendor_data), + AML_OFFSET(pin_config.vendor_offset), + 0}, +}; diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index 8dd09952b826..2d3e9888837d 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -291,6 +291,25 @@ const char *acpi_gbl_pt_decode[] = { "/* UNKNOWN parity keyword */" }; +/* pin_config type */ + +const char *acpi_gbl_ptyp_decode[] = { + "Default", + "Bias Pull-up", + "Bias Pull-down", + "Bias Default", + "Bias Disable", + "Bias High Impedance", + "Bias Bus Hold", + "Drive Open Drain", + "Drive Open Source", + "Drive Push Pull", + "Drive Strength", + "Slew Rate", + "Input Debounce", + "Input Schmitt Trigger", +}; + #endif /* @@ -334,6 +353,7 @@ const u8 acpi_gbl_resource_aml_sizes[] = { ACPI_AML_SIZE_LARGE(struct aml_resource_gpio), ACPI_AML_SIZE_LARGE(struct aml_resource_pin_function), ACPI_AML_SIZE_LARGE(struct aml_resource_common_serialbus), + ACPI_AML_SIZE_LARGE(struct aml_resource_pin_config), }; const u8 acpi_gbl_resource_aml_serial_bus_sizes[] = { @@ -385,7 +405,8 @@ static const u8 acpi_gbl_resource_types[] = { ACPI_FIXED_LENGTH, /* 0B Extended* address */ ACPI_VARIABLE_LENGTH, /* 0C Gpio* */ ACPI_VARIABLE_LENGTH, /* 0D pin_function */ - ACPI_VARIABLE_LENGTH /* 0E *serial_bus */ + ACPI_VARIABLE_LENGTH, /* 0E *serial_bus */ + ACPI_VARIABLE_LENGTH, /* 0F pin_config */ }; /******************************************************************************* |