ata: ahci_brcmstb: rename to support across Broadcom SoC's

Rename the existing Broadcom STB ahci driver to common
Broadcom SATA3 driver to share this across Broadcom SoCs.

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

1 files changed, 380 insertions, 0 deletions

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
new file mode 100644
index 000000000000..e87bcec0fd7c
--- /dev/null
+++ b/drivers/ata/ahci_brcm.c
@@ -0,0 +1,380 @@
+/*
+ * Broadcom SATA3 AHCI Controller Driver
+ *
+ * Copyright © 2009-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+
+#include "ahci.h"
+
+#define DRV_NAME					"brcm-ahci"
+
+#define SATA_TOP_CTRL_VERSION				0x0
+#define SATA_TOP_CTRL_BUS_CTRL				0x4
+ #define MMIO_ENDIAN_SHIFT				0 /* CPU->AHCI */
+ #define DMADESC_ENDIAN_SHIFT				2 /* AHCI->DDR */
+ #define DMADATA_ENDIAN_SHIFT				4 /* AHCI->DDR */
+ #define PIODATA_ENDIAN_SHIFT				6
+  #define ENDIAN_SWAP_NONE				0
+  #define ENDIAN_SWAP_FULL				2
+ #define OVERRIDE_HWINIT				BIT(16)
+#define SATA_TOP_CTRL_TP_CTRL				0x8
+#define SATA_TOP_CTRL_PHY_CTRL				0xc
+ #define SATA_TOP_CTRL_PHY_CTRL_1			0x0
+  #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE	BIT(14)
+ #define SATA_TOP_CTRL_PHY_CTRL_2			0x4
+  #define SATA_TOP_CTRL_2_SW_RST_MDIOREG		BIT(0)
+  #define SATA_TOP_CTRL_2_SW_RST_OOB			BIT(1)
+  #define SATA_TOP_CTRL_2_SW_RST_RX			BIT(2)
+  #define SATA_TOP_CTRL_2_SW_RST_TX			BIT(3)
+  #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET		BIT(14)
+ #define SATA_TOP_CTRL_PHY_OFFS				0x8
+ #define SATA_TOP_MAX_PHYS				2
+
+#define SATA_FIRST_PORT_CTRL				0x700
+#define SATA_NEXT_PORT_CTRL_OFFSET			0x80
+#define SATA_PORT_PCTRL6(reg_base)			(reg_base + 0x18)
+
+/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
+#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
+#define DATA_ENDIAN			 2 /* AHCI->DDR inbound accesses */
+#define MMIO_ENDIAN			 2 /* CPU->AHCI outbound accesses */
+#else
+#define DATA_ENDIAN			 0
+#define MMIO_ENDIAN			 0
+#endif
+
+#define BUS_CTRL_ENDIAN_CONF				\
+	((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) |	\
+	(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) |		\
+	(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
+
+enum brcm_ahci_quirks {
+	BRCM_AHCI_QUIRK_NO_NCQ		= BIT(0),
+	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(1),
+};
+
+struct brcm_ahci_priv {
+	struct device *dev;
+	void __iomem *top_ctrl;
+	u32 port_mask;
+	u32 quirks;
+};
+
+static const struct ata_port_info ahci_brcm_port_info = {
+	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
+	.link_flags	= ATA_LFLAG_NO_DB_DELAY,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_platform_ops,
+};
+
+static inline u32 brcm_sata_readreg(void __iomem *addr)
+{
+	/*
+	 * MIPS endianness is configured by boot strap, which also reverses all
+	 * bus endianness (i.e., big-endian CPU + big endian bus ==> native
+	 * endian I/O).
+	 *
+	 * Other architectures (e.g., ARM) either do not support big endian, or
+	 * else leave I/O in little endian mode.
+	 */
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+		return __raw_readl(addr);
+	else
+		return readl_relaxed(addr);
+}
+
+static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
+{
+	/* See brcm_sata_readreg() comments */
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+		__raw_writel(val, addr);
+	else
+		writel_relaxed(val, addr);
+}
+
+static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
+{
+	struct brcm_ahci_priv *priv = hpriv->plat_data;
+	u32 bus_ctrl, port_ctrl, host_caps;
+	int i;
+
+	/* Enable support for ALPM */
+	bus_ctrl = brcm_sata_readreg(priv->top_ctrl +
+				     SATA_TOP_CTRL_BUS_CTRL);
+	brcm_sata_writereg(bus_ctrl | OVERRIDE_HWINIT,
+			   priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+	host_caps = readl(hpriv->mmio + HOST_CAP);
+	writel(host_caps | HOST_CAP_ALPM, hpriv->mmio);
+	brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+
+	/*
+	 * Adjust timeout to allow PLL sufficient time to lock while waking
+	 * up from slumber mode.
+	 */
+	for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
+	     i < SATA_TOP_MAX_PHYS;
+	     i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
+		if (priv->port_mask & BIT(i))
+			writel(0xff1003fc,
+			       hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
+	}
+}
+
+static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
+{
+	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
+				(port * SATA_TOP_CTRL_PHY_OFFS);
+	void __iomem *p;
+	u32 reg;
+
+	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+		return;
+
+	/* clear PHY_DEFAULT_POWER_STATE */
+	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
+	reg = brcm_sata_readreg(p);
+	reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
+	brcm_sata_writereg(reg, p);
+
+	/* reset the PHY digital logic */
+	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
+	reg = brcm_sata_readreg(p);
+	reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
+		 SATA_TOP_CTRL_2_SW_RST_RX);
+	reg |= SATA_TOP_CTRL_2_SW_RST_TX;
+	brcm_sata_writereg(reg, p);
+	reg = brcm_sata_readreg(p);
+	reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
+	brcm_sata_writereg(reg, p);
+	reg = brcm_sata_readreg(p);
+	reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
+	brcm_sata_writereg(reg, p);
+	(void)brcm_sata_readreg(p);
+}
+
+static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
+{
+	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
+				(port * SATA_TOP_CTRL_PHY_OFFS);
+	void __iomem *p;
+	u32 reg;
+
+	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+		return;
+
+	/* power-off the PHY digital logic */
+	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
+	reg = brcm_sata_readreg(p);
+	reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
+		SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
+		SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
+	brcm_sata_writereg(reg, p);
+
+	/* set PHY_DEFAULT_POWER_STATE */
+	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
+	reg = brcm_sata_readreg(p);
+	reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
+	brcm_sata_writereg(reg, p);
+}
+
+static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
+		if (priv->port_mask & BIT(i))
+			brcm_sata_phy_enable(priv, i);
+}
+
+static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
+		if (priv->port_mask & BIT(i))
+			brcm_sata_phy_disable(priv, i);
+}
+
+static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
+				  struct brcm_ahci_priv *priv)
+{
+	void __iomem *ahci;
+	struct resource *res;
+	u32 impl;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
+	ahci = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ahci))
+		return 0;
+
+	impl = readl(ahci + HOST_PORTS_IMPL);
+
+	if (fls(impl) > SATA_TOP_MAX_PHYS)
+		dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
+			 impl);
+	else if (!impl)
+		dev_info(priv->dev, "no ports found\n");
+
+	devm_iounmap(&pdev->dev, ahci);
+	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
+
+	return impl;
+}
+
+static void brcm_sata_init(struct brcm_ahci_priv *priv)
+{
+	/* Configure endianness */
+	brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
+			   priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcm_ahci_suspend(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct brcm_ahci_priv *priv = hpriv->plat_data;
+	int ret;
+
+	ret = ahci_platform_suspend(dev);
+	brcm_sata_phys_disable(priv);
+	return ret;
+}
+
+static int brcm_ahci_resume(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct brcm_ahci_priv *priv = hpriv->plat_data;
+
+	brcm_sata_init(priv);
+	brcm_sata_phys_enable(priv);
+	brcm_sata_alpm_init(hpriv);
+	return ahci_platform_resume(dev);
+}
+#endif
+
+static struct scsi_host_template ahci_platform_sht = {
+	AHCI_SHT(DRV_NAME),
+};
+
+static int brcm_ahci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct brcm_ahci_priv *priv;
+	struct ahci_host_priv *hpriv;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
+	priv->top_ctrl = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->top_ctrl))
+		return PTR_ERR(priv->top_ctrl);
+
+	if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
+		priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
+		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+	}
+
+	brcm_sata_init(priv);
+
+	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
+	if (!priv->port_mask)
+		return -ENODEV;
+
+	brcm_sata_phys_enable(priv);
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+	hpriv->plat_data = priv;
+	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
+
+	brcm_sata_alpm_init(hpriv);
+
+	ret = ahci_platform_enable_resources(hpriv);
+	if (ret)
+		return ret;
+
+	if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
+		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
+
+	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
+				      &ahci_platform_sht);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "Broadcom AHCI SATA3 registered\n");
+
+	return 0;
+}
+
+static int brcm_ahci_remove(struct platform_device *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct brcm_ahci_priv *priv = hpriv->plat_data;
+	int ret;
+
+	ret = ata_platform_remove_one(pdev);
+	if (ret)
+		return ret;
+
+	brcm_sata_phys_disable(priv);
+
+	return 0;
+}
+
+static const struct of_device_id ahci_of_match[] = {
+	{.compatible = "brcm,bcm7425-ahci"},
+	{.compatible = "brcm,bcm7445-ahci"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
+
+static struct platform_driver brcm_ahci_driver = {
+	.probe = brcm_ahci_probe,
+	.remove = brcm_ahci_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = ahci_of_match,
+		.pm = &ahci_brcm_pm_ops,
+	},
+};
+module_platform_driver(brcm_ahci_driver);
+
+MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
+MODULE_AUTHOR("Brian Norris");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sata-brcmstb");