ata: Add support for the Tegra124 SATA controller

This adds support for the integrated AHCI-compliant Serial ATA
controller present on the NVIDIA Tegra124 system-on-chip.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

1 files changed, 377 insertions, 0 deletions

diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
new file mode 100644
index 000000000000..d30bb21afd67
--- /dev/null
+++ b/drivers/ata/ahci_tegra.c
@@ -0,0 +1,377 @@
+/*
+ * drivers/ata/ahci_tegra.c
+ *
+ * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author:
+ *	Mikko Perttunen <mperttunen@nvidia.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/reset.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/tegra-powergate.h>
+#include <linux/regulator/consumer.h>
+#include "ahci.h"
+
+#define SATA_CONFIGURATION_0				0x180
+#define SATA_CONFIGURATION_EN_FPCI			BIT(0)
+
+#define SCFG_OFFSET					0x1000
+
+#define T_SATA0_CFG_1					0x04
+#define T_SATA0_CFG_1_IO_SPACE				BIT(0)
+#define T_SATA0_CFG_1_MEMORY_SPACE			BIT(1)
+#define T_SATA0_CFG_1_BUS_MASTER			BIT(2)
+#define T_SATA0_CFG_1_SERR				BIT(8)
+
+#define T_SATA0_CFG_9					0x24
+#define T_SATA0_CFG_9_BASE_ADDRESS_SHIFT		13
+
+#define SATA_FPCI_BAR5					0x94
+#define SATA_FPCI_BAR5_START_SHIFT			4
+
+#define SATA_INTR_MASK					0x188
+#define SATA_INTR_MASK_IP_INT_MASK			BIT(16)
+
+#define T_SATA0_AHCI_HBA_CAP_BKDR			0x300
+
+#define T_SATA0_BKDOOR_CC				0x4a4
+
+#define T_SATA0_CFG_SATA				0x54c
+#define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN		BIT(12)
+
+#define T_SATA0_CFG_MISC				0x550
+
+#define T_SATA0_INDEX					0x680
+
+#define T_SATA0_CHX_PHY_CTRL1_GEN1			0x690
+#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK		0xff
+#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT		0
+#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK		(0xff << 8)
+#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT	8
+
+#define T_SATA0_CHX_PHY_CTRL1_GEN2			0x694
+#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK		0xff
+#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_SHIFT		0
+#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK		(0xff << 12)
+#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_SHIFT	12
+
+#define T_SATA0_CHX_PHY_CTRL2				0x69c
+#define T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1		0x23
+
+#define T_SATA0_CHX_PHY_CTRL11				0x6d0
+#define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ		(0x2800 << 16)
+
+#define FUSE_SATA_CALIB					0x124
+#define FUSE_SATA_CALIB_MASK				0x3
+
+struct sata_pad_calibration {
+	u8 gen1_tx_amp;
+	u8 gen1_tx_peak;
+	u8 gen2_tx_amp;
+	u8 gen2_tx_peak;
+};
+
+static const struct sata_pad_calibration tegra124_pad_calibration[] = {
+	{0x18, 0x04, 0x18, 0x0a},
+	{0x0e, 0x04, 0x14, 0x0a},
+	{0x0e, 0x07, 0x1a, 0x0e},
+	{0x14, 0x0e, 0x1a, 0x0e},
+};
+
+struct tegra_ahci_priv {
+	struct platform_device	   *pdev;
+	void __iomem		   *sata_regs;
+	struct reset_control	   *sata_rst;
+	struct reset_control	   *sata_oob_rst;
+	struct reset_control	   *sata_cold_rst;
+	/* Needs special handling, cannot use ahci_platform */
+	struct clk		   *sata_clk;
+	struct regulator_bulk_data supplies[5];
+};
+
+static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
+{
+	struct tegra_ahci_priv *tegra = hpriv->plat_data;
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(tegra->supplies),
+				    tegra->supplies);
+	if (ret)
+		return ret;
+
+	ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_SATA,
+						tegra->sata_clk,
+						tegra->sata_rst);
+	if (ret)
+		goto disable_regulators;
+
+	reset_control_assert(tegra->sata_oob_rst);
+	reset_control_assert(tegra->sata_cold_rst);
+
+	ret = ahci_platform_enable_resources(hpriv);
+	if (ret)
+		goto disable_power;
+
+	reset_control_deassert(tegra->sata_cold_rst);
+	reset_control_deassert(tegra->sata_oob_rst);
+
+	return 0;
+
+disable_power:
+	clk_disable_unprepare(tegra->sata_clk);
+
+	tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
+
+disable_regulators:
+	regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
+
+	return ret;
+}
+
+static void tegra_ahci_power_off(struct ahci_host_priv *hpriv)
+{
+	struct tegra_ahci_priv *tegra = hpriv->plat_data;
+
+	ahci_platform_disable_resources(hpriv);
+
+	reset_control_assert(tegra->sata_rst);
+	reset_control_assert(tegra->sata_oob_rst);
+	reset_control_assert(tegra->sata_cold_rst);
+
+	clk_disable_unprepare(tegra->sata_clk);
+	tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
+
+	regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
+}
+
+static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
+{
+	struct tegra_ahci_priv *tegra = hpriv->plat_data;
+	int ret;
+	unsigned int val;
+	struct sata_pad_calibration calib;
+
+	ret = tegra_ahci_power_on(hpriv);
+	if (ret) {
+		dev_err(&tegra->pdev->dev,
+			"failed to power on AHCI controller: %d\n", ret);
+		return ret;
+	}
+
+	val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
+	val |= SATA_CONFIGURATION_EN_FPCI;
+	writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
+
+	/* Pad calibration */
+
+	/* FIXME Always use calibration 0. Change this to read the calibration
+	 * fuse once the fuse driver has landed. */
+	val = 0;
+
+	calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
+
+	writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
+
+	val = readl(tegra->sata_regs +
+		SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
+	val |= calib.gen1_tx_amp <<
+			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
+	val |= calib.gen1_tx_peak <<
+			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
+	writel(val, tegra->sata_regs + SCFG_OFFSET +
+		T_SATA0_CHX_PHY_CTRL1_GEN1);
+
+	val = readl(tegra->sata_regs +
+			SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
+	val |= calib.gen2_tx_amp <<
+			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
+	val |= calib.gen2_tx_peak <<
+			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
+	writel(val, tegra->sata_regs + SCFG_OFFSET +
+		T_SATA0_CHX_PHY_CTRL1_GEN2);
+
+	writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
+		tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
+	writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
+		tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
+
+	writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
+
+	/* Program controller device ID */
+
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
+	val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
+
+	writel(0x01060100, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
+
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
+	val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
+
+	/* Enable IO & memory access, bus master mode */
+
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
+	val |= T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
+		T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
+
+	/* Program SATA MMIO */
+
+	writel(0x10000 << SATA_FPCI_BAR5_START_SHIFT,
+	       tegra->sata_regs + SATA_FPCI_BAR5);
+
+	writel(0x08000 << T_SATA0_CFG_9_BASE_ADDRESS_SHIFT,
+	       tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
+
+	/* Unmask SATA interrupts */
+
+	val = readl(tegra->sata_regs + SATA_INTR_MASK);
+	val |= SATA_INTR_MASK_IP_INT_MASK;
+	writel(val, tegra->sata_regs + SATA_INTR_MASK);
+
+	return 0;
+}
+
+static void tegra_ahci_controller_deinit(struct ahci_host_priv *hpriv)
+{
+	tegra_ahci_power_off(hpriv);
+}
+
+static void tegra_ahci_host_stop(struct ata_host *host)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+
+	tegra_ahci_controller_deinit(hpriv);
+}
+
+static struct ata_port_operations ahci_tegra_port_ops = {
+	.inherits	= &ahci_ops,
+	.host_stop	= tegra_ahci_host_stop,
+};
+
+static const struct ata_port_info ahci_tegra_port_info = {
+	.flags		= AHCI_FLAG_COMMON,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_tegra_port_ops,
+};
+
+static const struct of_device_id tegra_ahci_of_match[] = {
+	{ .compatible = "nvidia,tegra124-ahci" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
+
+static int tegra_ahci_probe(struct platform_device *pdev)
+{
+	struct ahci_host_priv *hpriv;
+	struct tegra_ahci_priv *tegra;
+	struct resource *res;
+	int ret;
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
+	if (!tegra)
+		return -ENOMEM;
+
+	hpriv->plat_data = tegra;
+
+	tegra->pdev = pdev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(tegra->sata_regs))
+		return PTR_ERR(tegra->sata_regs);
+
+	tegra->sata_rst = devm_reset_control_get(&pdev->dev, "sata");
+	if (IS_ERR(tegra->sata_rst)) {
+		dev_err(&pdev->dev, "Failed to get sata reset\n");
+		return PTR_ERR(tegra->sata_rst);
+	}
+
+	tegra->sata_oob_rst = devm_reset_control_get(&pdev->dev, "sata-oob");
+	if (IS_ERR(tegra->sata_oob_rst)) {
+		dev_err(&pdev->dev, "Failed to get sata-oob reset\n");
+		return PTR_ERR(tegra->sata_oob_rst);
+	}
+
+	tegra->sata_cold_rst = devm_reset_control_get(&pdev->dev, "sata-cold");
+	if (IS_ERR(tegra->sata_cold_rst)) {
+		dev_err(&pdev->dev, "Failed to get sata-cold reset\n");
+		return PTR_ERR(tegra->sata_cold_rst);
+	}
+
+	tegra->sata_clk = devm_clk_get(&pdev->dev, "sata");
+	if (IS_ERR(tegra->sata_clk)) {
+		dev_err(&pdev->dev, "Failed to get sata clock\n");
+		return PTR_ERR(tegra->sata_clk);
+	}
+
+	tegra->supplies[0].supply = "avdd";
+	tegra->supplies[1].supply = "hvdd";
+	tegra->supplies[2].supply = "vddio";
+	tegra->supplies[3].supply = "target-5v";
+	tegra->supplies[4].supply = "target-12v";
+
+	ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(tegra->supplies),
+				      tegra->supplies);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get regulators\n");
+		return ret;
+	}
+
+	ret = tegra_ahci_controller_init(hpriv);
+	if (ret)
+		return ret;
+
+	ret = ahci_platform_init_host(pdev, hpriv, &ahci_tegra_port_info,
+				      0, 0, 0);
+	if (ret)
+		goto deinit_controller;
+
+	return 0;
+
+deinit_controller:
+	tegra_ahci_controller_deinit(hpriv);
+
+	return ret;
+};
+
+static struct platform_driver tegra_ahci_driver = {
+	.probe = tegra_ahci_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = "tegra-ahci",
+		.of_match_table = tegra_ahci_of_match,
+	},
+	/* LP0 suspend support not implemented */
+};
+module_platform_driver(tegra_ahci_driver);
+
+MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
+MODULE_DESCRIPTION("Tegra124 AHCI SATA driver");
+MODULE_LICENSE("GPL v2");