summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_oldpiix.c
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2006-08-30 00:12:40 +0200
committerJeff Garzik <jeff@garzik.org>2006-08-30 00:12:40 +0200
commit669a5db411d85a14f86cd92bc16bf7ab5b8aa235 (patch)
tree8d4f9d63e18185695a4d97e1a3fa4e18b61c7345 /drivers/ata/pata_oldpiix.c
parentMerge /spare/repo/linux-2.6 into upstream (diff)
downloadlinux-669a5db411d85a14f86cd92bc16bf7ab5b8aa235.tar.xz
linux-669a5db411d85a14f86cd92bc16bf7ab5b8aa235.zip
[libata] Add a bunch of PATA drivers.
The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata/pata_oldpiix.c')
-rw-r--r--drivers/ata/pata_oldpiix.c339
1 files changed, 339 insertions, 0 deletions
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
new file mode 100644
index 000000000000..04c618a2664b
--- /dev/null
+++ b/drivers/ata/pata_oldpiix.c
@@ -0,0 +1,339 @@
+/*
+ * pata_oldpiix.c - Intel PATA/SATA controllers
+ *
+ * (C) 2005 Red Hat <alan@redhat.com>
+ *
+ * Some parts based on ata_piix.c by Jeff Garzik and others.
+ *
+ * Early PIIX differs significantly from the later PIIX as it lacks
+ * SITRE and the slave timing registers. This means that you have to
+ * set timing per channel, or be clever. Libata tells us whenever it
+ * does drive selection and we use this to reload the timings.
+ *
+ * Because of these behaviour differences PIIX gets its own driver module.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+
+#define DRV_NAME "pata_oldpiix"
+#define DRV_VERSION "0.5.1"
+
+/**
+ * oldpiix_pre_reset - probe begin
+ * @ap: ATA port
+ *
+ * Set up cable type and use generic probe init
+ */
+
+static int oldpiix_pre_reset(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ static const struct pci_bits oldpiix_enable_bits[] = {
+ { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
+ { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
+ };
+
+ if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) {
+ ata_port_disable(ap);
+ printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ return 0;
+ }
+ ap->cbl = ATA_CBL_PATA40;
+ return ata_std_prereset(ap);
+}
+
+/**
+ * oldpiix_pata_error_handler - Probe specified port on PATA host controller
+ * @ap: Port to probe
+ * @classes:
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void oldpiix_pata_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, oldpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * oldpiix_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
+ u16 idetm_data;
+ int control = 0;
+
+ /*
+ * See Intel Document 298600-004 for the timing programing rules
+ * for PIIX/ICH. Note that the early PIIX does not have the slave
+ * timing port at 0x44.
+ */
+
+ static const /* ISP RTC */
+ u8 timings[][2] = { { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ if (pio > 2)
+ control |= 1; /* TIME1 enable */
+ if (ata_pio_need_iordy(adev))
+ control |= 2; /* IE IORDY */
+
+ /* Intel specifies that the PPE functionality is for disk only */
+ if (adev->class == ATA_DEV_ATA)
+ control |= 4; /* PPE enable */
+
+ pci_read_config_word(dev, idetm_port, &idetm_data);
+
+ /* Enable PPE, IE and TIME as appropriate. Clear the other
+ drive timing bits */
+ if (adev->devno == 0) {
+ idetm_data &= 0xCCE0;
+ idetm_data |= control;
+ } else {
+ idetm_data &= 0xCC0E;
+ idetm_data |= (control << 4);
+ }
+ idetm_data |= (timings[pio][0] << 12) |
+ (timings[pio][1] << 8);
+ pci_write_config_word(dev, idetm_port, idetm_data);
+
+ /* Track which port is configured */
+ ap->private_data = adev;
+}
+
+/**
+ * oldpiix_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Device to program
+ * @isich: True if the device is an ICH and has IOCFG registers
+ *
+ * Set MWDMA mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ u8 idetm_port = ap->port_no ? 0x42 : 0x40;
+ u16 idetm_data;
+
+ static const /* ISP RTC */
+ u8 timings[][2] = { { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ /*
+ * MWDMA is driven by the PIO timings. We must also enable
+ * IORDY unconditionally along with TIME1. PPE has already
+ * been set when the PIO timing was set.
+ */
+
+ unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
+ unsigned int control;
+ const unsigned int needed_pio[3] = {
+ XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
+ };
+ int pio = needed_pio[mwdma] - XFER_PIO_0;
+
+ pci_read_config_word(dev, idetm_port, &idetm_data);
+
+ control = 3; /* IORDY|TIME0 */
+ /* Intel specifies that the PPE functionality is for disk only */
+ if (adev->class == ATA_DEV_ATA)
+ control |= 4; /* PPE enable */
+
+ /* If the drive MWDMA is faster than it can do PIO then
+ we must force PIO into PIO0 */
+
+ if (adev->pio_mode < needed_pio[mwdma])
+ /* Enable DMA timing only */
+ control |= 8; /* PIO cycles in PIO0 */
+
+ /* Mask out the relevant control and timing bits we will load. Also
+ clear the other drive TIME register as a precaution */
+ if (adev->devno == 0) {
+ idetm_data &= 0xCCE0;
+ idetm_data |= control;
+ } else {
+ idetm_data &= 0xCC0E;
+ idetm_data |= (control << 4);
+ }
+ idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
+ pci_write_config_word(dev, idetm_port, idetm_data);
+
+ /* Track which port is configured */
+ ap->private_data = adev;
+}
+
+/**
+ * oldpiix_qc_issue_prot - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings if
+ * neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ * that, even if we get this wrong, cycles to the other device will
+ * be made PIO0.
+ */
+
+static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+
+ if (adev != ap->private_data) {
+ if (adev->dma_mode)
+ oldpiix_set_dmamode(ap, adev);
+ else if (adev->pio_mode)
+ oldpiix_set_piomode(ap, adev);
+ }
+ return ata_qc_issue_prot(qc);
+}
+
+
+static struct scsi_host_template oldpiix_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static const struct ata_port_operations oldpiix_pata_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = oldpiix_set_piomode,
+ .set_dmamode = oldpiix_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = oldpiix_pata_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = oldpiix_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+
+/**
+ * oldpiix_init_one - Register PIIX ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in oldpiix_pci_tbl matching with @pdev
+ *
+ * Called from kernel PCI layer. We probe for combined mode (sigh),
+ * and then hand over control to libata, for it to do the rest.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ static struct ata_port_info info = {
+ .sht = &oldpiix_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma1-2 */
+ .port_ops = &oldpiix_pata_ops,
+ };
+ static struct ata_port_info *port_info[2] = { &info, &info };
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
+
+ return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static const struct pci_device_id oldpiix_pci_tbl[] = {
+ { PCI_DEVICE(0x8086, 0x1230), },
+ { } /* terminate list */
+};
+
+static struct pci_driver oldpiix_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = oldpiix_pci_tbl,
+ .probe = oldpiix_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+static int __init oldpiix_init(void)
+{
+ return pci_register_driver(&oldpiix_pci_driver);
+}
+
+static void __exit oldpiix_exit(void)
+{
+ pci_unregister_driver(&oldpiix_pci_driver);
+}
+
+
+module_init(oldpiix_init);
+module_exit(oldpiix_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("SCSI low-level driver for early PIIX series controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, oldpiix_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+