diff options
| author | Tejun Heo <htejun@gmail.com> | 2007-08-18 06:14:55 +0200 |
|---|---|---|
| committer | Jeff Garzik <jeff@garzik.org> | 2007-10-12 20:55:37 +0200 |
| commit | cbcdd87593a1d85c5c4b259945a3a09eee12814d (patch) | |
| tree | ee03df963a12ec7f30f6c3a8742421daf2c34f50 /drivers/ata/sata_vsc.c | |
| parent | libata: pata_pdc2027x PLL detection minor cleanup (diff) | |
| download | linux-cbcdd87593a1d85c5c4b259945a3a09eee12814d.tar.xz linux-cbcdd87593a1d85c5c4b259945a3a09eee12814d.zip | |
libata: implement and use ata_port_desc() to report port configuration
Currently, port configuration reporting has the following problems.
* iomapped address is reported instead of raw address
* report contains irrelevant fields or lacks necessary fields for
non-SFF controllers.
* host->irq/irq2 are there just for reporting and hacky.
This patch implements and uses ata_port_desc() and
ata_port_pbar_desc(). ata_port_desc() is almost identical to
ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no
locking requirement, can only be used during host initialization and "
" is used as separator instead of ", ". ata_port_pbar_desc() is a
helper to ease reporting of a PCI BAR or an offsetted address into it.
LLD pushes whatever description it wants using the above two
functions. The accumulated description is printed on host
registration after "[S/P]ATA max MAX_XFERMODE ".
SFF init helpers and ata_host_activate() automatically add
descriptions for addresses and irq respectively, so only LLDs which
isn't standard SFF need to add custom descriptions. In many cases,
such controllers need to report different things anyway.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata/sata_vsc.c')
| -rw-r--r-- | drivers/ata/sata_vsc.c | 12 |
1 files changed, 9 insertions, 3 deletions
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index b1777c3f6d5c..0d9be1684873 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -406,9 +406,15 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d mmio_base = host->iomap[VSC_MMIO_BAR]; - for (i = 0; i < host->n_ports; i++) - vsc_sata_setup_port(&host->ports[i]->ioaddr, - mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET; + + vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset); + + ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port"); + } /* * Use 32 bit DMA mask, because 64 bit address support is poor. |