diff options
author | Evan Wang <xswang@marvell.com> | 2018-04-13 06:32:30 +0200 |
---|---|---|
committer | Tejun Heo <tj@kernel.org> | 2018-04-26 20:25:04 +0200 |
commit | fa89f53bd7288d6aa7a982841119e7123faf5a53 (patch) | |
tree | edcd32381580db6a29a58a681df8ee70dd7d8a68 /drivers/ata | |
parent | Revert "ata: ahci-platform: add reset control support" (diff) | |
download | linux-fa89f53bd7288d6aa7a982841119e7123faf5a53.tar.xz linux-fa89f53bd7288d6aa7a982841119e7123faf5a53.zip |
libahci: Allow drivers to override stop_engine
Marvell armada37xx, armada7k and armada8k share the same
AHCI sata controller IP, and currently there is an issue
(Errata Ref#226)that the SATA can not be detected via SATA
Port-MultiPlayer(PMP). After debugging, the reason is
found that the value of Port-x FIS-based Switching Control
(PxFBS@0x40) became wrong.
According to design, the bits[11:8, 0] of register PxFBS
are cleared when Port Command and Status (0x18) bit[0]
changes its value from 1 to 0, i.e. falling edge of Port
Command and Status bit[0] sends PULSE that resets PxFBS
bits[11:8; 0].
So it needs save the port PxFBS register before PxCMD
ST write and restore the port PxFBS register afterwards
in ahci_stop_engine().
This commit allows drivers to override ahci_stop_engine
behavior for use by the Marvell AHCI driver(and potentially
other drivers in the future).
Signed-off-by: Evan Wang <xswang@marvell.com>
Cc: Ofer Heifetz <oferh@marvell.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/ahci.c | 6 | ||||
-rw-r--r-- | drivers/ata/ahci.h | 7 | ||||
-rw-r--r-- | drivers/ata/ahci_qoriq.c | 2 | ||||
-rw-r--r-- | drivers/ata/ahci_xgene.c | 4 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 20 | ||||
-rw-r--r-- | drivers/ata/sata_highbank.c | 2 |
6 files changed, 26 insertions, 15 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 1ff17799769d..6389c88b3500 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -698,7 +698,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, DPRINTK("ENTER\n"); - ahci_stop_engine(ap); + hpriv->stop_engine(ap); rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), deadline, &online, NULL); @@ -724,7 +724,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, bool online; int rc; - ahci_stop_engine(ap); + hpriv->stop_engine(ap); /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(link->device, &tf); @@ -788,7 +788,7 @@ static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, DPRINTK("ENTER\n"); - ahci_stop_engine(ap); + hpriv->stop_engine(ap); for (i = 0; i < 2; i++) { u16 val; diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index a9d996e17d75..824bd399f02e 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -365,6 +365,13 @@ struct ahci_host_priv { * be overridden anytime before the host is activated. */ void (*start_engine)(struct ata_port *ap); + /* + * Optional ahci_stop_engine override, if not set this gets set to the + * default ahci_stop_engine during ahci_save_initial_config, this can + * be overridden anytime before the host is activated. + */ + int (*stop_engine)(struct ata_port *ap); + irqreturn_t (*irq_handler)(int irq, void *dev_instance); /* only required for per-port MSI(-X) support */ diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c index 2685f28160f7..cfdef4d44ae9 100644 --- a/drivers/ata/ahci_qoriq.c +++ b/drivers/ata/ahci_qoriq.c @@ -96,7 +96,7 @@ static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class, DPRINTK("ENTER\n"); - ahci_stop_engine(ap); + hpriv->stop_engine(ap); /* * There is a errata on ls1021a Rev1.0 and Rev2.0 which is: diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c index c2b5941d9184..ad58da7c9aff 100644 --- a/drivers/ata/ahci_xgene.c +++ b/drivers/ata/ahci_xgene.c @@ -165,7 +165,7 @@ static int xgene_ahci_restart_engine(struct ata_port *ap) PORT_CMD_ISSUE, 0x0, 1, 100)) return -EBUSY; - ahci_stop_engine(ap); + hpriv->stop_engine(ap); ahci_start_fis_rx(ap); /* @@ -421,7 +421,7 @@ static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); - ahci_stop_engine(ap); + hpriv->stop_engine(ap); rc = xgene_ahci_do_hardreset(link, deadline, &online); diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 7adcf3caabd0..e5d90977caec 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -560,6 +560,9 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) if (!hpriv->start_engine) hpriv->start_engine = ahci_start_engine; + if (!hpriv->stop_engine) + hpriv->stop_engine = ahci_stop_engine; + if (!hpriv->irq_handler) hpriv->irq_handler = ahci_single_level_irq_intr; } @@ -897,9 +900,10 @@ static void ahci_start_port(struct ata_port *ap) static int ahci_deinit_port(struct ata_port *ap, const char **emsg) { int rc; + struct ahci_host_priv *hpriv = ap->host->private_data; /* disable DMA */ - rc = ahci_stop_engine(ap); + rc = hpriv->stop_engine(ap); if (rc) { *emsg = "failed to stop engine"; return rc; @@ -1310,7 +1314,7 @@ int ahci_kick_engine(struct ata_port *ap) int busy, rc; /* stop engine */ - rc = ahci_stop_engine(ap); + rc = hpriv->stop_engine(ap); if (rc) goto out_restart; @@ -1549,7 +1553,7 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class, DPRINTK("ENTER\n"); - ahci_stop_engine(ap); + hpriv->stop_engine(ap); /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(link->device, &tf); @@ -2075,14 +2079,14 @@ void ahci_error_handler(struct ata_port *ap) if (!(ap->pflags & ATA_PFLAG_FROZEN)) { /* restart engine */ - ahci_stop_engine(ap); + hpriv->stop_engine(ap); hpriv->start_engine(ap); } sata_pmp_error_handler(ap); if (!ata_dev_enabled(ap->link.device)) - ahci_stop_engine(ap); + hpriv->stop_engine(ap); } EXPORT_SYMBOL_GPL(ahci_error_handler); @@ -2129,7 +2133,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) return; /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */ - rc = ahci_stop_engine(ap); + rc = hpriv->stop_engine(ap); if (rc) return; @@ -2189,7 +2193,7 @@ static void ahci_enable_fbs(struct ata_port *ap) return; } - rc = ahci_stop_engine(ap); + rc = hpriv->stop_engine(ap); if (rc) return; @@ -2222,7 +2226,7 @@ static void ahci_disable_fbs(struct ata_port *ap) return; } - rc = ahci_stop_engine(ap); + rc = hpriv->stop_engine(ap); if (rc) return; diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index aafb8cc03523..e67815b896fc 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -410,7 +410,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, int rc; int retry = 100; - ahci_stop_engine(ap); + hpriv->stop_engine(ap); /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(link->device, &tf); |