Merge branch 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
 "Three minor device-specific fixes and revert of NCQ autosense added
  during this -rc1.

  It turned out that NCQ autosense as currently implemented interferes
  with the usual error handling behavior.  It will be revisited in the
  near future"

* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  sata_sx4: Check return code from pdc20621_i2c_read()
  Revert "libata: Implement NCQ autosense"
  Revert "libata: Implement support for sense data reporting"
  Revert "libata-eh: Set 'information' field for autosense"
  ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n

6 files changed, 24 insertions, 154 deletions

diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index ce1e3a885981..14b7305d2ba0 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -92,7 +92,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr)
 	 * Other architectures (e.g., ARM) either do not support big endian, or
 	 * else leave I/O in little endian mode.
 	 */
-	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		return __raw_readl(addr);
 	else
 		return readl_relaxed(addr);
@@ -101,7 +101,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr)
 static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
 {
 	/* See brcm_sata_readreg() comments */
-	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		__raw_writel(val, addr);
 	else
 		writel_relaxed(val, addr);
@@ -209,6 +209,7 @@ static void brcm_sata_init(struct brcm_ahci_priv *priv)
 			   priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int brcm_ahci_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
@@ -231,6 +232,7 @@ static int brcm_ahci_resume(struct device *dev)
 	brcm_sata_phys_enable(priv);
 	return ahci_platform_resume(dev);
 }
+#endif
 
 static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT(DRV_NAME),
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index db5d9f79a247..19bcb80b2031 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -694,11 +694,11 @@ static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
  *	RETURNS:
  *	Block address read from @tf.
  */
-u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
+u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
 {
 	u64 block = 0;
 
-	if (!dev || tf->flags & ATA_TFLAG_LBA) {
+	if (tf->flags & ATA_TFLAG_LBA) {
 		if (tf->flags & ATA_TFLAG_LBA48) {
 			block |= (u64)tf->hob_lbah << 40;
 			block |= (u64)tf->hob_lbam << 32;
@@ -2147,24 +2147,6 @@ static int ata_dev_config_ncq(struct ata_device *dev,
 	return 0;
 }
 
-static void ata_dev_config_sense_reporting(struct ata_device *dev)
-{
-	unsigned int err_mask;
-
-	if (!ata_id_has_sense_reporting(dev->id))
-		return;
-
-	if (ata_id_sense_reporting_enabled(dev->id))
-		return;
-
-	err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
-	if (err_mask) {
-		ata_dev_dbg(dev,
-			    "failed to enable Sense Data Reporting, Emask 0x%x\n",
-			    err_mask);
-	}
-}
-
 /**
  *	ata_dev_configure - Configure the specified ATA/ATAPI device
  *	@dev: Target device to configure
@@ -2387,7 +2369,7 @@ int ata_dev_configure(struct ata_device *dev)
 					dev->devslp_timing[i] = sata_setting[j];
 				}
 		}
-		ata_dev_config_sense_reporting(dev);
+
 		dev->cdb_len = 16;
 	}
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7465031a893c..cb0508af1459 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1592,8 +1592,6 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
 	tf->hob_lbah = buf[10];
 	tf->nsect = buf[12];
 	tf->hob_nsect = buf[13];
-	if (ata_id_has_ncq_autosense(dev->id))
-		tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
 
 	return 0;
 }
@@ -1630,70 +1628,6 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
 }
 
 /**
- *	ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
- *	@dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
- *	@sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
- *	@dfl_sense_key: default sense key to use
- *
- *	Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
- *	SENSE.  This function is EH helper.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	encoded sense data on success, 0 on failure or if sense data
- *	is not available.
- */
-static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
-				struct scsi_cmnd *cmd)
-{
-	struct ata_device *dev = qc->dev;
-	struct ata_taskfile tf;
-	unsigned int err_mask;
-
-	if (!cmd)
-		return 0;
-
-	DPRINTK("ATA request sense\n");
-	ata_dev_warn(dev, "request sense\n");
-	if (!ata_id_sense_reporting_enabled(dev->id)) {
-		ata_dev_warn(qc->dev, "sense data reporting disabled\n");
-		return 0;
-	}
-	ata_tf_init(dev, &tf);
-
-	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
-	tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
-	tf.command = ATA_CMD_REQ_SENSE_DATA;
-	tf.protocol = ATA_PROT_NODATA;
-
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
-	/*
-	 * ACS-4 states:
-	 * The device may set the SENSE DATA AVAILABLE bit to one in the
-	 * STATUS field and clear the ERROR bit to zero in the STATUS field
-	 * to indicate that the command returned completion without an error
-	 * and the sense data described in table 306 is available.
-	 *
-	 * IOW the 'ATA_SENSE' bit might not be set even though valid
-	 * sense data is available.
-	 * So check for both.
-	 */
-	if ((tf.command & ATA_SENSE) ||
-		tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
-		ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
-		qc->flags |= ATA_QCFLAG_SENSE_VALID;
-		ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
-			     tf.lbah, tf.lbam, tf.lbal);
-	} else {
-		ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
-			     tf.command, err_mask);
-	}
-	return err_mask;
-}
-
-/**
  *	atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
  *	@dev: device to perform REQUEST_SENSE to
  *	@sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
@@ -1855,19 +1789,6 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 	memcpy(&qc->result_tf, &tf, sizeof(tf));
 	qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
 	qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
-	if (qc->result_tf.auxiliary) {
-		char sense_key, asc, ascq;
-
-		sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
-		asc = (qc->result_tf.auxiliary >> 8) & 0xff;
-		ascq = qc->result_tf.auxiliary & 0xff;
-		ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n",
-			    sense_key, asc, ascq);
-		ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq);
-		ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf);
-		qc->flags |= ATA_QCFLAG_SENSE_VALID;
-	}
-
 	ehc->i.err_mask &= ~AC_ERR_DEV;
 }
 
@@ -1897,27 +1818,6 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 		return ATA_EH_RESET;
 	}
 
-	/*
-	 * Sense data reporting does not work if the
-	 * device fault bit is set.
-	 */
-	if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
-	    !(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
-		if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
-			tmp = ata_eh_request_sense(qc, qc->scsicmd);
-			if (tmp)
-				qc->err_mask |= tmp;
-			else
-				ata_scsi_set_sense_information(qc->scsicmd, tf);
-		} else {
-			ata_dev_warn(qc->dev, "sense data available but port frozen\n");
-		}
-	}
-
-	/* Set by NCQ autosense or request sense above */
-	if (qc->flags & ATA_QCFLAG_SENSE_VALID)
-		return 0;
-
 	if (stat & (ATA_ERR | ATA_DF))
 		qc->err_mask |= AC_ERR_DEV;
 	else
@@ -2661,15 +2561,14 @@ static void ata_eh_link_report(struct ata_link *link)
 
 #ifdef CONFIG_ATA_VERBOSE_ERROR
 		if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
-				    ATA_SENSE | ATA_ERR)) {
+				    ATA_ERR)) {
 			if (res->command & ATA_BUSY)
 				ata_dev_err(qc->dev, "status: { Busy }\n");
 			else
-				ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
+				ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
 				  res->command & ATA_DRDY ? "DRDY " : "",
 				  res->command & ATA_DF ? "DF " : "",
 				  res->command & ATA_DRQ ? "DRQ " : "",
-				  res->command & ATA_SENSE ? "SENSE " : "",
 				  res->command & ATA_ERR ? "ERR " : "");
 		}
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 641a61a59e89..0d7f0da3a269 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -270,28 +270,13 @@ DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR,
 	    ata_scsi_park_show, ata_scsi_park_store);
 EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
 
-void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
 {
-	if (!cmd)
-		return;
-
 	cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
 
 	scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
 }
 
-void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
-				    const struct ata_taskfile *tf)
-{
-	u64 information;
-
-	if (!cmd)
-		return;
-
-	information = ata_tf_read_block(tf, NULL);
-	scsi_set_sense_information(cmd->sense_buffer, information);
-}
-
 static ssize_t
 ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
@@ -1792,9 +1777,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 	    ((cdb[2] & 0x20) || need_sense)) {
 		ata_gen_passthru_sense(qc);
 	} else {
-		if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
-			cmd->result = SAM_STAT_CHECK_CONDITION;
-		} else if (!need_sense) {
+		if (!need_sense) {
 			cmd->result = SAM_STAT_GOOD;
 		} else {
 			/* TODO: decide which descriptor format to use
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index a998a175f9f1..f840ca18a7c0 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -67,8 +67,7 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
 extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
-extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
-			     struct ata_device *dev);
+extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
 extern unsigned ata_exec_internal(struct ata_device *dev,
 				  struct ata_taskfile *tf, const u8 *cdb,
 				  int dma_dir, void *buf, unsigned int buflen,
@@ -138,9 +137,6 @@ extern int ata_scsi_add_hosts(struct ata_host *host,
 			      struct scsi_host_template *sht);
 extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
 extern int ata_scsi_offline_dev(struct ata_device *dev);
-extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq);
-extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
-					   const struct ata_taskfile *tf);
 extern void ata_scsi_media_change_notify(struct ata_device *dev);
 extern void ata_scsi_hotplug(struct work_struct *work);
 extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 3a18a8a719b4..fab504fd9cfd 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1238,8 +1238,12 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
 	readl(mmio + PDC_SDRAM_CONTROL);
 
 	/* Turn on for ECC */
-	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
-			  PDC_DIMM_SPD_TYPE, &spd0);
+	if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+			       PDC_DIMM_SPD_TYPE, &spd0)) {
+		pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+		       PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+		return 1;
+	}
 	if (spd0 == 0x02) {
 		data |= (0x01 << 16);
 		writel(data, mmio + PDC_SDRAM_CONTROL);
@@ -1380,8 +1384,12 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
 
 	/* ECC initiliazation. */
 
-	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
-			  PDC_DIMM_SPD_TYPE, &spd0);
+	if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+			       PDC_DIMM_SPD_TYPE, &spd0)) {
+		pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+		       PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+		return 1;
+	}
 	if (spd0 == 0x02) {
 		void *buf;
 		VPRINTK("Start ECC initialization\n");