[PATCH] cciss: increase number of commands on controller

Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds.  Most Smart Array
controllers can support up to 1024 commands but the E200 family can only
support 128.  To prevent annoying "fifo full" messages we define nr_cmds on a
per controller basis by adding it the product table.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2 files changed, 40 insertions, 36 deletions

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index d1f65def8ebb..0f976aaaf049 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -93,28 +93,29 @@ MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
 /*  board_id = Subsystem Device ID & Vendor ID
  *  product = Marketing Name for the board
  *  access = Address of the struct of function pointers
+ *  nr_cmds = Number of commands supported by controller
  */
 static struct board_type products[] = {
-	{0x40700E11, "Smart Array 5300", &SA5_access},
-	{0x40800E11, "Smart Array 5i", &SA5B_access},
-	{0x40820E11, "Smart Array 532", &SA5B_access},
-	{0x40830E11, "Smart Array 5312", &SA5B_access},
-	{0x409A0E11, "Smart Array 641", &SA5_access},
-	{0x409B0E11, "Smart Array 642", &SA5_access},
-	{0x409C0E11, "Smart Array 6400", &SA5_access},
-	{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
-	{0x40910E11, "Smart Array 6i", &SA5_access},
-	{0x3225103C, "Smart Array P600", &SA5_access},
-	{0x3223103C, "Smart Array P800", &SA5_access},
-	{0x3234103C, "Smart Array P400", &SA5_access},
-	{0x3235103C, "Smart Array P400i", &SA5_access},
-	{0x3211103C, "Smart Array E200i", &SA5_access},
-	{0x3212103C, "Smart Array E200", &SA5_access},
-	{0x3213103C, "Smart Array E200i", &SA5_access},
-	{0x3214103C, "Smart Array E200i", &SA5_access},
-	{0x3215103C, "Smart Array E200i", &SA5_access},
-	{0x3233103C, "Smart Array E500", &SA5_access},
-	{0xFFFF103C, "Unknown Smart Array", &SA5_access},
+	{0x40700E11, "Smart Array 5300", &SA5_access, 512},
+	{0x40800E11, "Smart Array 5i", &SA5B_access, 512},
+	{0x40820E11, "Smart Array 532", &SA5B_access, 512},
+	{0x40830E11, "Smart Array 5312", &SA5B_access, 512},
+	{0x409A0E11, "Smart Array 641", &SA5_access, 512},
+	{0x409B0E11, "Smart Array 642", &SA5_access, 512},
+	{0x409C0E11, "Smart Array 6400", &SA5_access, 512},
+	{0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
+	{0x40910E11, "Smart Array 6i", &SA5_access, 512},
+	{0x3225103C, "Smart Array P600", &SA5_access, 512},
+	{0x3223103C, "Smart Array P800", &SA5_access, 512},
+	{0x3234103C, "Smart Array P400", &SA5_access, 512},
+	{0x3235103C, "Smart Array P400i", &SA5_access, 512},
+	{0x3211103C, "Smart Array E200i", &SA5_access, 120},
+	{0x3212103C, "Smart Array E200", &SA5_access, 120},
+	{0x3213103C, "Smart Array E200i", &SA5_access, 120},
+	{0x3214103C, "Smart Array E200i", &SA5_access, 120},
+	{0x3215103C, "Smart Array E200i", &SA5_access, 120},
+	{0x3233103C, "Smart Array E500", &SA5_access, 512},
+	{0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
 };
 
 /* How long to wait (in milliseconds) for board to go into simple mode */
@@ -125,7 +126,6 @@ static struct board_type products[] = {
 #define MAX_CMD_RETRIES 3
 
 #define READ_AHEAD 	 1024
-#define NR_CMDS		 384	/* #commands that can be outstanding */
 #define MAX_CTLR	32
 
 /* Originally cciss driver only supports 8 major numbers */
@@ -404,8 +404,8 @@ static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool)
 	} else {		/* get it out of the controllers pool */
 
 		do {
-			i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS);
-			if (i == NR_CMDS)
+			i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
+			if (i == h->nr_cmds)
 				return NULL;
 		} while (test_and_set_bit
 			 (i & (BITS_PER_LONG - 1),
@@ -1247,7 +1247,7 @@ static void cciss_check_queues(ctlr_info_t *h)
 	 * in case the interrupt we serviced was from an ioctl and did not
 	 * free any new commands.
 	 */
-	if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
+	if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds)
 		return;
 
 	/* We have room on the queue for more commands.  Now we need to queue
@@ -1266,7 +1266,7 @@ static void cciss_check_queues(ctlr_info_t *h)
 		/* check to see if we have maxed out the number of commands
 		 * that can be placed on the queue.
 		 */
-		if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) {
+		if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) {
 			if (curr_queue == start_queue) {
 				h->next_to_run =
 				    (start_queue + 1) % (h->highest_lun + 1);
@@ -2140,7 +2140,7 @@ static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
 
 	/* We've sent down an abort or reset, but something else
 	   has completed */
-	if (srl->ncompletions >= (NR_CMDS + 2)) {
+	if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
 		/* Uh oh.  No room to save it for later... */
 		printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
 		       "reject list overflow, command lost!\n", ctlr);
@@ -2677,7 +2677,7 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id)
 			a1 = a;
 			if ((a & 0x04)) {
 				a2 = (a >> 3);
-				if (a2 >= NR_CMDS) {
+				if (a2 >= h->nr_cmds) {
 					printk(KERN_WARNING
 					       "cciss: controller cciss%d failed, stopping.\n",
 					       h->ctlr);
@@ -2960,6 +2960,7 @@ static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
 		if (board_id == products[i].board_id) {
 			c->product_name = products[i].product_name;
 			c->access = *(products[i].access);
+			c->nr_cmds = products[i].nr_cmds;
 			break;
 		}
 	}
@@ -2979,6 +2980,7 @@ static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
 		if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
 			c->product_name = products[i-1].product_name;
 			c->access = *(products[i-1].access);
+			c->nr_cmds = products[i-1].nr_cmds;
 			printk(KERN_WARNING "cciss: This is an unknown "
 				"Smart Array controller.\n"
 				"cciss: Please update to the latest driver "
@@ -3286,15 +3288,15 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	       hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
 
 	hba[i]->cmd_pool_bits =
-	    kmalloc(((NR_CMDS + BITS_PER_LONG -
+	    kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG -
 		      1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
 	hba[i]->cmd_pool = (CommandList_struct *)
 	    pci_alloc_consistent(hba[i]->pdev,
-		    NR_CMDS * sizeof(CommandList_struct),
+		    hba[i]->nr_cmds * sizeof(CommandList_struct),
 		    &(hba[i]->cmd_pool_dhandle));
 	hba[i]->errinfo_pool = (ErrorInfo_struct *)
 	    pci_alloc_consistent(hba[i]->pdev,
-		    NR_CMDS * sizeof(ErrorInfo_struct),
+		    hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
 		    &(hba[i]->errinfo_pool_dhandle));
 	if ((hba[i]->cmd_pool_bits == NULL)
 	    || (hba[i]->cmd_pool == NULL)
@@ -3305,7 +3307,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 #ifdef CONFIG_CISS_SCSI_TAPE
 	hba[i]->scsi_rejects.complete =
 	    kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
-		    (NR_CMDS + 5), GFP_KERNEL);
+		    (hba[i]->nr_cmds + 5), GFP_KERNEL);
 	if (hba[i]->scsi_rejects.complete == NULL) {
 		printk(KERN_ERR "cciss: out of memory");
 		goto clean4;
@@ -3319,7 +3321,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	/* command and error info recs zeroed out before
 	   they are used */
 	memset(hba[i]->cmd_pool_bits, 0,
-	       ((NR_CMDS + BITS_PER_LONG -
+	       ((hba[i]->nr_cmds + BITS_PER_LONG -
 		 1) / BITS_PER_LONG) * sizeof(unsigned long));
 
 #ifdef CCISS_DEBUG
@@ -3388,11 +3390,11 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	kfree(hba[i]->cmd_pool_bits);
 	if (hba[i]->cmd_pool)
 		pci_free_consistent(hba[i]->pdev,
-				    NR_CMDS * sizeof(CommandList_struct),
+				    hba[i]->nr_cmds * sizeof(CommandList_struct),
 				    hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
 	if (hba[i]->errinfo_pool)
 		pci_free_consistent(hba[i]->pdev,
-				    NR_CMDS * sizeof(ErrorInfo_struct),
+				    hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
 				    hba[i]->errinfo_pool,
 				    hba[i]->errinfo_pool_dhandle);
 	free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
@@ -3459,9 +3461,9 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
 		}
 	}
 
-	pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
+	pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
 			    hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
-	pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(ErrorInfo_struct),
+	pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
 			    hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
 	kfree(hba[i]->cmd_pool_bits);
 #ifdef CONFIG_CISS_SCSI_TAPE
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 562235c1445a..0d765f9237be 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -60,6 +60,7 @@ struct ctlr_info
 	__u32	board_id;
 	void __iomem *vaddr;
 	unsigned long paddr;
+	int 	nr_cmds; /* Number of commands allowed on this controller */
 	CfgTable_struct __iomem *cfgtable;
 	int	interrupts_enabled;
 	int	major;
@@ -282,6 +283,7 @@ struct board_type {
 	__u32	board_id;
 	char	*product_name;
 	struct access_method *access;
+	int nr_cmds; /* Max cmds this kind of ctlr can handle. */
 };
 
 #define CCISS_LOCK(i)	(&hba[i]->lock)