amiflop: fold headers into C file

amifd.h and amifdreg.h are only used from amiflop.c, and they're pretty
small, so move the contents to amiflop.c and get rid of the .h files.
This is preparation for adding a struct blk_mq_tag_set to struct
amiga_floppy_struct.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 120 insertions, 3 deletions

diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 3aaf6af3ec23..a7d6e6a9b12f 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -61,10 +61,8 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
-#include <linux/amifdreg.h>
-#include <linux/amifd.h>
 #include <linux/fs.h>
-#include <linux/blkdev.h>
+#include <linux/blk-mq.h>
 #include <linux/elevator.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -87,6 +85,125 @@
  */
 
 /*
+ * CIAAPRA bits (read only)
+ */
+
+#define DSKRDY      (0x1<<5)        /* disk ready when low */
+#define DSKTRACK0   (0x1<<4)        /* head at track zero when low */
+#define DSKPROT     (0x1<<3)        /* disk protected when low */
+#define DSKCHANGE   (0x1<<2)        /* low when disk removed */
+
+/*
+ * CIAAPRB bits (read/write)
+ */
+
+#define DSKMOTOR    (0x1<<7)        /* motor on when low */
+#define DSKSEL3     (0x1<<6)        /* select drive 3 when low */
+#define DSKSEL2     (0x1<<5)        /* select drive 2 when low */
+#define DSKSEL1     (0x1<<4)        /* select drive 1 when low */
+#define DSKSEL0     (0x1<<3)        /* select drive 0 when low */
+#define DSKSIDE     (0x1<<2)        /* side selection: 0 = upper, 1 = lower */
+#define DSKDIREC    (0x1<<1)        /* step direction: 0=in, 1=out (to trk 0) */
+#define DSKSTEP     (0x1)           /* pulse low to step head 1 track */
+
+/*
+ * DSKBYTR bits (read only)
+ */
+
+#define DSKBYT      (1<<15)         /* register contains valid byte when set */
+#define DMAON       (1<<14)         /* disk DMA enabled */
+#define DISKWRITE   (1<<13)         /* disk write bit in DSKLEN enabled */
+#define WORDEQUAL   (1<<12)         /* DSKSYNC register match when true */
+/* bits 7-0 are data */
+
+/*
+ * ADKCON/ADKCONR bits
+ */
+
+#ifndef SETCLR
+#define ADK_SETCLR      (1<<15)     /* control bit */
+#endif
+#define ADK_PRECOMP1    (1<<14)     /* precompensation selection */
+#define ADK_PRECOMP0    (1<<13)     /* 00=none, 01=140ns, 10=280ns, 11=500ns */
+#define ADK_MFMPREC     (1<<12)     /* 0=GCR precomp., 1=MFM precomp. */
+#define ADK_WORDSYNC    (1<<10)     /* enable DSKSYNC auto DMA */
+#define ADK_MSBSYNC     (1<<9)      /* when 1, enable sync on MSbit (for GCR) */
+#define ADK_FAST        (1<<8)      /* bit cell: 0=2us (GCR), 1=1us (MFM) */
+
+/*
+ * DSKLEN bits
+ */
+
+#define DSKLEN_DMAEN    (1<<15)
+#define DSKLEN_WRITE    (1<<14)
+
+/*
+ * INTENA/INTREQ bits
+ */
+
+#define DSKINDEX    (0x1<<4)        /* DSKINDEX bit */
+
+/*
+ * Misc
+ */
+
+#define MFM_SYNC    0x4489          /* standard MFM sync value */
+
+/* Values for FD_COMMAND */
+#define FD_RECALIBRATE		0x07	/* move to track 0 */
+#define FD_SEEK			0x0F	/* seek track */
+#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
+#define FD_WRITE		0xC5	/* write with MT, MFM */
+#define FD_SENSEI		0x08	/* Sense Interrupt Status */
+#define FD_SPECIFY		0x03	/* specify HUT etc */
+#define FD_FORMAT		0x4D	/* format one track */
+#define FD_VERSION		0x10	/* get version code */
+#define FD_CONFIGURE		0x13	/* configure FIFO operation */
+#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
+
+#define FD_MAX_UNITS    4	/* Max. Number of drives */
+#define FLOPPY_MAX_SECTORS	22	/* Max. Number of sectors per track */
+
+struct fd_data_type {
+	char *name;		/* description of data type */
+	int sects;		/* sectors per track */
+	int (*read_fkt)(int);	/* read whole track */
+	void (*write_fkt)(int);	/* write whole track */
+};
+
+struct fd_drive_type {
+	unsigned long code;		/* code returned from drive */
+	char *name;			/* description of drive */
+	unsigned int tracks;	/* number of tracks */
+	unsigned int heads;		/* number of heads */
+	unsigned int read_size;	/* raw read size for one track */
+	unsigned int write_size;	/* raw write size for one track */
+	unsigned int sect_mult;	/* sectors and gap multiplier (HD = 2) */
+	unsigned int precomp1;	/* start track for precomp 1 */
+	unsigned int precomp2;	/* start track for precomp 2 */
+	unsigned int step_delay;	/* time (in ms) for delay after step */
+	unsigned int settle_time;	/* time to settle after dir change */
+	unsigned int side_time;	/* time needed to change sides */
+};
+
+struct amiga_floppy_struct {
+	struct fd_drive_type *type;	/* type of floppy for this unit */
+	struct fd_data_type *dtype;	/* type of floppy for this unit */
+	int track;			/* current track (-1 == unknown) */
+	unsigned char *trackbuf;	/* current track (kmaloc()'d */
+
+	int blocks;			/* total # blocks on disk */
+
+	int changed;			/* true when not known */
+	int disk;			/* disk in drive (-1 == unknown) */
+	int motor;			/* true when motor is at speed */
+	int busy;			/* true when drive is active */
+	int dirty;			/* true when trackbuf is not on disk */
+	int status;			/* current error code for unit */
+	struct gendisk *gendisk;
+};
+
+/*
  *  Error codes
  */
 #define FD_OK		0	/* operation succeeded */