Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/wireless/ath/ath9k/Kconfig
	drivers/net/xen-netback/netback.c
	net/batman-adv/bat_iv_ogm.c
	net/wireless/nl80211.c

The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.

The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().

Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.

The nl80211 conflict is a little more involved.  In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported.  Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.

However, the dump handlers to not use this logic.  Instead they have
to explicitly do the locking.  There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so.  So I fixed that whilst handling the overlapping changes.

To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 28 insertions, 0 deletions

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index c63488c54f4a..13693b7a0d5c 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -82,6 +82,23 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
 	.io_port_2 = 0x7a,
 };
 
+static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
+	.cfg = 0x00,
+	.host_int_mask = 0x02,
+	.host_intstatus = 0x03,
+	.card_status = 0x50,
+	.sq_read_base_addr_a0 = 0x60,
+	.sq_read_base_addr_a1 = 0x61,
+	.card_revision = 0xbc,
+	.card_fw_status0 = 0xc0,
+	.card_fw_status1 = 0xc1,
+	.card_rx_len = 0xc2,
+	.card_rx_unit = 0xc3,
+	.io_port_0 = 0xd8,
+	.io_port_1 = 0xd9,
+	.io_port_2 = 0xda,
+};
+
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
@@ -103,6 +120,13 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.sd_blksz_fw_dl	= 256,
 };
 
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8897_uapsta.bin",
+	.reg		= &btmrvl_reg_88xx,
+	.sd_blksz_fw_dl	= 256,
+};
+
 static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8688 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
@@ -116,6 +140,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8797 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
 			.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
+	/* Marvell SD8897 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd8897 },
 
 	{ }	/* Terminating entry */
 };
@@ -1194,3 +1221,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
 MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");