summaryrefslogtreecommitdiffstats
path: root/drivers/bus
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-17 01:05:01 +0100
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-17 01:05:01 +0100
commitcf9b0772f2e410645fece13b749bd56505b998b8 (patch)
tree8b171a2c49d1e9e41d4e43fb91602e664cde8551 /drivers/bus
parentMerge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/ar... (diff)
parentsoc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader (diff)
downloadlinux-cf9b0772f2e410645fece13b749bd56505b998b8.tar.xz
linux-cf9b0772f2e410645fece13b749bd56505b998b8.zip
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
Diffstat (limited to 'drivers/bus')
-rw-r--r--drivers/bus/Kconfig8
-rw-r--r--drivers/bus/Makefile1
-rw-r--r--drivers/bus/ts-nbus.c375
3 files changed, 384 insertions, 0 deletions
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index fa94a85bf410..dc7b3c7b7d42 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -165,6 +165,14 @@ config TI_SYSC
Generic driver for Texas Instruments interconnect target module
found on many TI SoCs.
+config TS_NBUS
+ tristate "Technologic Systems NBUS Driver"
+ depends on SOC_IMX28
+ depends on OF_GPIO && PWM
+ help
+ Driver for the Technologic Systems NBUS which is used to interface
+ with the peripherals in the FPGA of the TS-4600 SoM.
+
config UNIPHIER_SYSTEM_BUS
tristate "UniPhier System Bus driver"
depends on ARCH_UNIPHIER && OF
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 94a079008cbe..9bcd0bf3954b 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o
obj-$(CONFIG_TI_SYSC) += ti-sysc.o
+obj-$(CONFIG_TS_NBUS) += ts-nbus.o
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
new file mode 100644
index 000000000000..073fd9011154
--- /dev/null
+++ b/drivers/bus/ts-nbus.c
@@ -0,0 +1,375 @@
+/*
+ * NBUS driver for TS-4600 based boards
+ *
+ * Copyright (c) 2016 - Savoir-faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This driver implements a GPIOs bit-banged bus, called the NBUS by Technologic
+ * Systems. It is used to communicate with the peripherals in the FPGA on the
+ * TS-4600 SoM.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/ts-nbus.h>
+
+#define TS_NBUS_DIRECTION_IN 0
+#define TS_NBUS_DIRECTION_OUT 1
+#define TS_NBUS_WRITE_ADR 0
+#define TS_NBUS_WRITE_VAL 1
+
+struct ts_nbus {
+ struct pwm_device *pwm;
+ struct gpio_descs *data;
+ struct gpio_desc *csn;
+ struct gpio_desc *txrx;
+ struct gpio_desc *strobe;
+ struct gpio_desc *ale;
+ struct gpio_desc *rdy;
+ struct mutex lock;
+};
+
+/*
+ * request all gpios required by the bus.
+ */
+static int ts_nbus_init_pdata(struct platform_device *pdev, struct ts_nbus
+ *ts_nbus)
+{
+ ts_nbus->data = devm_gpiod_get_array(&pdev->dev, "ts,data",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(ts_nbus->data)) {
+ dev_err(&pdev->dev, "failed to retrieve ts,data-gpio from dts\n");
+ return PTR_ERR(ts_nbus->data);
+ }
+
+ ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH);
+ if (IS_ERR(ts_nbus->csn)) {
+ dev_err(&pdev->dev, "failed to retrieve ts,csn-gpio from dts\n");
+ return PTR_ERR(ts_nbus->csn);
+ }
+
+ ts_nbus->txrx = devm_gpiod_get(&pdev->dev, "ts,txrx", GPIOD_OUT_HIGH);
+ if (IS_ERR(ts_nbus->txrx)) {
+ dev_err(&pdev->dev, "failed to retrieve ts,txrx-gpio from dts\n");
+ return PTR_ERR(ts_nbus->txrx);
+ }
+
+ ts_nbus->strobe = devm_gpiod_get(&pdev->dev, "ts,strobe", GPIOD_OUT_HIGH);
+ if (IS_ERR(ts_nbus->strobe)) {
+ dev_err(&pdev->dev, "failed to retrieve ts,strobe-gpio from dts\n");
+ return PTR_ERR(ts_nbus->strobe);
+ }
+
+ ts_nbus->ale = devm_gpiod_get(&pdev->dev, "ts,ale", GPIOD_OUT_HIGH);
+ if (IS_ERR(ts_nbus->ale)) {
+ dev_err(&pdev->dev, "failed to retrieve ts,ale-gpio from dts\n");
+ return PTR_ERR(ts_nbus->ale);
+ }
+
+ ts_nbus->rdy = devm_gpiod_get(&pdev->dev, "ts,rdy", GPIOD_IN);
+ if (IS_ERR(ts_nbus->rdy)) {
+ dev_err(&pdev->dev, "failed to retrieve ts,rdy-gpio from dts\n");
+ return PTR_ERR(ts_nbus->rdy);
+ }
+
+ return 0;
+}
+
+/*
+ * the data gpios are used for reading and writing values, their directions
+ * should be adjusted accordingly.
+ */
+static void ts_nbus_set_direction(struct ts_nbus *ts_nbus, int direction)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (direction == TS_NBUS_DIRECTION_IN)
+ gpiod_direction_input(ts_nbus->data->desc[i]);
+ else
+ /* when used as output the default state of the data
+ * lines are set to high */
+ gpiod_direction_output(ts_nbus->data->desc[i], 1);
+ }
+}
+
+/*
+ * reset the bus in its initial state.
+ * The data, csn, strobe and ale lines must be zero'ed to let the FPGA knows a
+ * new transaction can be process.
+ */
+static void ts_nbus_reset_bus(struct ts_nbus *ts_nbus)
+{
+ int i;
+ int values[8];
+
+ for (i = 0; i < 8; i++)
+ values[i] = 0;
+
+ gpiod_set_array_value_cansleep(8, ts_nbus->data->desc, values);
+ gpiod_set_value_cansleep(ts_nbus->csn, 0);
+ gpiod_set_value_cansleep(ts_nbus->strobe, 0);
+ gpiod_set_value_cansleep(ts_nbus->ale, 0);
+}
+
+/*
+ * let the FPGA knows it can process.
+ */
+static void ts_nbus_start_transaction(struct ts_nbus *ts_nbus)
+{
+ gpiod_set_value_cansleep(ts_nbus->strobe, 1);
+}
+
+/*
+ * read a byte value from the data gpios.
+ * return 0 on success or negative errno on failure.
+ */
+static int ts_nbus_read_byte(struct ts_nbus *ts_nbus, u8 *val)
+{
+ struct gpio_descs *gpios = ts_nbus->data;
+ int ret, i;
+
+ *val = 0;
+ for (i = 0; i < 8; i++) {
+ ret = gpiod_get_value_cansleep(gpios->desc[i]);
+ if (ret < 0)
+ return ret;
+ if (ret)
+ *val |= BIT(i);
+ }
+
+ return 0;
+}
+
+/*
+ * set the data gpios accordingly to the byte value.
+ */
+static void ts_nbus_write_byte(struct ts_nbus *ts_nbus, u8 byte)
+{
+ struct gpio_descs *gpios = ts_nbus->data;
+ int i;
+ int values[8];
+
+ for (i = 0; i < 8; i++)
+ if (byte & BIT(i))
+ values[i] = 1;
+ else
+ values[i] = 0;
+
+ gpiod_set_array_value_cansleep(8, gpios->desc, values);
+}
+
+/*
+ * reading the bus consists of resetting the bus, then notifying the FPGA to
+ * send the data in the data gpios and return the read value.
+ * return 0 on success or negative errno on failure.
+ */
+static int ts_nbus_read_bus(struct ts_nbus *ts_nbus, u8 *val)
+{
+ ts_nbus_reset_bus(ts_nbus);
+ ts_nbus_start_transaction(ts_nbus);
+
+ return ts_nbus_read_byte(ts_nbus, val);
+}
+
+/*
+ * writing to the bus consists of resetting the bus, then define the type of
+ * command (address/value), write the data and notify the FPGA to retrieve the
+ * value in the data gpios.
+ */
+static void ts_nbus_write_bus(struct ts_nbus *ts_nbus, int cmd, u8 val)
+{
+ ts_nbus_reset_bus(ts_nbus);
+
+ if (cmd == TS_NBUS_WRITE_ADR)
+ gpiod_set_value_cansleep(ts_nbus->ale, 1);
+
+ ts_nbus_write_byte(ts_nbus, val);
+ ts_nbus_start_transaction(ts_nbus);
+}
+
+/*
+ * read the value in the FPGA register at the given address.
+ * return 0 on success or negative errno on failure.
+ */
+int ts_nbus_read(struct ts_nbus *ts_nbus, u8 adr, u16 *val)
+{
+ int ret, i;
+ u8 byte;
+
+ /* bus access must be atomic */
+ mutex_lock(&ts_nbus->lock);
+
+ /* set the bus in read mode */
+ gpiod_set_value_cansleep(ts_nbus->txrx, 0);
+
+ /* write address */
+ ts_nbus_write_bus(ts_nbus, TS_NBUS_WRITE_ADR, adr);
+
+ /* set the data gpios direction as input before reading */
+ ts_nbus_set_direction(ts_nbus, TS_NBUS_DIRECTION_IN);
+
+ /* reading value MSB first */
+ do {
+ *val = 0;
+ byte = 0;
+ for (i = 1; i >= 0; i--) {
+ /* read a byte from the bus, leave on error */
+ ret = ts_nbus_read_bus(ts_nbus, &byte);
+ if (ret < 0)
+ goto err;
+
+ /* append the byte read to the final value */
+ *val |= byte << (i * 8);
+ }
+ gpiod_set_value_cansleep(ts_nbus->csn, 1);
+ ret = gpiod_get_value_cansleep(ts_nbus->rdy);
+ } while (ret);
+
+err:
+ /* restore the data gpios direction as output after reading */
+ ts_nbus_set_direction(ts_nbus, TS_NBUS_DIRECTION_OUT);
+
+ mutex_unlock(&ts_nbus->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ts_nbus_read);
+
+/*
+ * write the desired value in the FPGA register at the given address.
+ */
+int ts_nbus_write(struct ts_nbus *ts_nbus, u8 adr, u16 val)
+{
+ int i;
+
+ /* bus access must be atomic */
+ mutex_lock(&ts_nbus->lock);
+
+ /* set the bus in write mode */
+ gpiod_set_value_cansleep(ts_nbus->txrx, 1);
+
+ /* write address */
+ ts_nbus_write_bus(ts_nbus, TS_NBUS_WRITE_ADR, adr);
+
+ /* writing value MSB first */
+ for (i = 1; i >= 0; i--)
+ ts_nbus_write_bus(ts_nbus, TS_NBUS_WRITE_VAL, (u8)(val >> (i * 8)));
+
+ /* wait for completion */
+ gpiod_set_value_cansleep(ts_nbus->csn, 1);
+ while (gpiod_get_value_cansleep(ts_nbus->rdy) != 0) {
+ gpiod_set_value_cansleep(ts_nbus->csn, 0);
+ gpiod_set_value_cansleep(ts_nbus->csn, 1);
+ }
+
+ mutex_unlock(&ts_nbus->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ts_nbus_write);
+
+static int ts_nbus_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+ struct pwm_args pargs;
+ struct device *dev = &pdev->dev;
+ struct ts_nbus *ts_nbus;
+ int ret;
+
+ ts_nbus = devm_kzalloc(dev, sizeof(*ts_nbus), GFP_KERNEL);
+ if (!ts_nbus)
+ return -ENOMEM;
+
+ mutex_init(&ts_nbus->lock);
+
+ ret = ts_nbus_init_pdata(pdev, ts_nbus);
+ if (ret < 0)
+ return ret;
+
+ pwm = devm_pwm_get(dev, NULL);
+ if (IS_ERR(pwm)) {
+ ret = PTR_ERR(pwm);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "unable to request PWM\n");
+ return ret;
+ }
+
+ pwm_get_args(pwm, &pargs);
+ if (!pargs.period) {
+ dev_err(&pdev->dev, "invalid PWM period\n");
+ return -EINVAL;
+ }
+
+ /*
+ * FIXME: pwm_apply_args() should be removed when switching to
+ * the atomic PWM API.
+ */
+ pwm_apply_args(pwm);
+ ret = pwm_config(pwm, pargs.period, pargs.period);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * we can now start the FPGA and populate the peripherals.
+ */
+ pwm_enable(pwm);
+ ts_nbus->pwm = pwm;
+
+ /*
+ * let the child nodes retrieve this instance of the ts-nbus.
+ */
+ dev_set_drvdata(dev, ts_nbus);
+
+ ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
+ if (ret < 0)
+ return ret;
+
+ dev_info(dev, "initialized\n");
+
+ return 0;
+}
+
+static int ts_nbus_remove(struct platform_device *pdev)
+{
+ struct ts_nbus *ts_nbus = dev_get_drvdata(&pdev->dev);
+
+ /* shutdown the FPGA */
+ mutex_lock(&ts_nbus->lock);
+ pwm_disable(ts_nbus->pwm);
+ mutex_unlock(&ts_nbus->lock);
+
+ return 0;
+}
+
+static const struct of_device_id ts_nbus_of_match[] = {
+ { .compatible = "technologic,ts-nbus", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ts_nbus_of_match);
+
+static struct platform_driver ts_nbus_driver = {
+ .probe = ts_nbus_probe,
+ .remove = ts_nbus_remove,
+ .driver = {
+ .name = "ts_nbus",
+ .of_match_table = ts_nbus_of_match,
+ },
+};
+
+module_platform_driver(ts_nbus_driver);
+
+MODULE_ALIAS("platform:ts_nbus");
+MODULE_AUTHOR("Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>");
+MODULE_DESCRIPTION("Technologic Systems NBUS");
+MODULE_LICENSE("GPL v2");