[PATCH] Char: mxser_new, rework to allow dynamic structs

This patch is preparation for further patches (pci probing) to allow allocated
structures to be private data in pci_dev structure.  Union two different
structures used in the driver (hw_conf and port/board descriptor) to another
2: port and board not to initialize 2 different things and to have ports
contained in board structure.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 576 insertions, 620 deletions

diff --git a/drivers/char/mxser_new.c b/drivers/char/mxser_new.c
index befff0548da3..7e53c7397832 100644
--- a/drivers/char/mxser_new.c
+++ b/drivers/char/mxser_new.c
@@ -57,7 +57,7 @@
 
 #include "mxser_new.h"
 
-#define	MXSER_VERSION	"1.9.1"
+#define	MXSER_VERSION	"2.0"
 #define	MXSERMAJOR	 174
 #define	MXSERCUMAJOR	 175
 
@@ -85,8 +85,6 @@
 #define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|\
 					  IXON|IXOFF))
 
-#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED)
-
 #define C168_ASIC_ID    1
 #define C104_ASIC_ID    2
 #define C102_ASIC_ID	0xB
@@ -202,8 +200,6 @@ static const struct mxpciuart_info Gpci_uart_info[UART_INFO_NUM] = {
 };
 
 
-#ifdef CONFIG_PCI
-
 static struct pci_device_id mxser_pcibrds[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C168),
 		.driver_data = MXSER_BOARD_C168_PCI },
@@ -243,18 +239,8 @@ static struct pci_device_id mxser_pcibrds[] = {
 		.driver_data = MXSER_BOARD_CP104EL },
 	{ }
 };
-
 MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
 
-
-#endif
-
-typedef struct _moxa_pci_info {
-	unsigned short busNum;
-	unsigned short devNum;
-	struct pci_dev *pdev;	/* add by Victor Yu. 06-23-2003 */
-} moxa_pci_info;
-
 static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
 static int ttymajor = MXSERMAJOR;
 static int calloutmajor = MXSERCUMAJOR;
@@ -301,69 +287,77 @@ struct mxser_mon_ext {
 	int iftype[32];
 };
 
-struct mxser_hwconf {
-	int board_type;
-	int ports;
-	int irq;
-	unsigned long vector;
-	unsigned long vector_mask;
-	int uart_type;
-	unsigned long ioaddr[MXSER_PORTS_PER_BOARD];
-	int baud_base[MXSER_PORTS_PER_BOARD];
-	moxa_pci_info pciInfo;
-	int IsMoxaMustChipFlag;	/* add by Victor Yu. 08-30-2002 */
-	int MaxCanSetBaudRate[MXSER_PORTS_PER_BOARD];	/* add by Victor Yu. 09-04-2002 */
-	unsigned long opmode_ioaddr[MXSER_PORTS_PER_BOARD];	/* add by Victor Yu. 01-05-2004 */
-};
+struct mxser_board;
+
+struct mxser_port {
+	struct mxser_board *board;
+	struct tty_struct *tty;
+
+	unsigned long ioaddr;
+	unsigned long opmode_ioaddr;
+	int max_baud;
 
-struct mxser_struct {
-	int port;
-	unsigned long base;	/* port base address */
-	int irq;		/* port using irq no. */
-	unsigned long vector;	/* port irq vector */
-	unsigned long vectormask;	/* port vector mask */
 	int rx_high_water;
 	int rx_trigger;		/* Rx fifo trigger level */
 	int rx_low_water;
 	int baud_base;		/* max. speed */
-	int flags;		/* defined in tty.h */
+	long realbaud;
 	int type;		/* UART type */
-	struct tty_struct *tty;
-	int read_status_mask;
-	int ignore_status_mask;
-	int xmit_fifo_size;
-	int custom_divisor;
+	int flags;		/* defined in tty.h */
+	long session;		/* Session of opening process */
+	long pgrp;		/* pgrp of opening process */
+
 	int x_char;		/* xon/xoff character */
-	int close_delay;
-	unsigned short closing_wait;
 	int IER;		/* Interrupt Enable Register */
 	int MCR;		/* Modem control register */
+
+	unsigned char stop_rx;
+	unsigned char ldisc_stop_rx;
+
+	int custom_divisor;
+	int close_delay;
+	unsigned short closing_wait;
+	unsigned char err_shadow;
 	unsigned long event;
+
 	int count;		/* # of fd on device */
 	int blocked_open;	/* # of blocked opens */
-	long session;		/* Session of opening process */
-	long pgrp;		/* pgrp of opening process */
+	struct async_icount icount; /* kernel counters for 4 input interrupts */
+	int timeout;
+
+	int read_status_mask;
+	int ignore_status_mask;
+	int xmit_fifo_size;
 	unsigned char *xmit_buf;
 	int xmit_head;
 	int xmit_tail;
 	int xmit_cnt;
-	struct work_struct tqueue;
+
 	struct termios normal_termios;
 	struct termios callout_termios;
+
+	struct mxser_mon mon_data;
+
+	spinlock_t slock;
+	struct work_struct tqueue;
 	wait_queue_head_t open_wait;
 	wait_queue_head_t close_wait;
 	wait_queue_head_t delta_msr_wait;
-	struct async_icount icount;	/* kernel counters for the 4 input interrupts */
-	int timeout;
-	int IsMoxaMustChipFlag;	/* add by Victor Yu. 08-30-2002 */
-	int MaxCanSetBaudRate;	/* add by Victor Yu. 09-04-2002 */
-	unsigned long opmode_ioaddr;	/* add by Victor Yu. 01-05-2004 */
-	unsigned char stop_rx;
-	unsigned char ldisc_stop_rx;
-	long realbaud;
-	struct mxser_mon mon_data;
-	unsigned char err_shadow;
-	spinlock_t slock;
+};
+
+struct mxser_board {
+	struct pci_dev *pdev; /* temporary (until pci probing) */
+
+	int irq;
+	int board_type;
+	unsigned int nports;
+	unsigned long vector;
+	unsigned long vector_mask;
+
+	int chip_flag;
+	int uart_type;
+
+	struct mxser_port ports[MXSER_PORTS_PER_BOARD];
 };
 
 struct mxser_mstatus {
@@ -381,8 +375,8 @@ static int mxserBoardCAP[MXSER_BOARDS] = {
 	/*  0x180, 0x280, 0x200, 0x320 */
 };
 
+static struct mxser_board mxser_boards[MXSER_BOARDS];
 static struct tty_driver *mxvar_sdriver;
-static struct mxser_struct mxvar_table[MXSER_PORTS];
 static struct tty_struct *mxvar_tty[MXSER_PORTS + 1];
 static struct termios *mxvar_termios[MXSER_PORTS + 1];
 static struct termios *mxvar_termios_locked[MXSER_PORTS + 1];
@@ -394,21 +388,13 @@ static int mxser_set_baud_method[MXSER_PORTS + 1];
 static spinlock_t gm_lock;
 
 /*
- * This is used to figure out the divisor speeds and the timeouts
- */
-
-static struct mxser_hwconf mxsercfg[MXSER_BOARDS];
-
-/*
  * static functions:
  */
 
-static void mxser_getcfg(int board, struct mxser_hwconf *hwconf);
 static int mxser_init(void);
 
 /* static void   mxser_poll(unsigned long); */
-static int mxser_get_ISA_conf(int, struct mxser_hwconf *);
-static int mxser_get_PCI_conf(int, int, int, struct mxser_hwconf *);
+static int mxser_get_ISA_conf(int, struct mxser_board *);
 static void mxser_do_softint(void *);
 static int mxser_open(struct tty_struct *, struct file *);
 static void mxser_close(struct tty_struct *, struct file *);
@@ -428,24 +414,28 @@ static void mxser_start(struct tty_struct *);
 static void mxser_hangup(struct tty_struct *);
 static void mxser_rs_break(struct tty_struct *, int);
 static irqreturn_t mxser_interrupt(int, void *, struct pt_regs *);
-static void mxser_receive_chars(struct mxser_struct *, int *);
-static void mxser_transmit_chars(struct mxser_struct *);
-static void mxser_check_modem_status(struct mxser_struct *, int);
-static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *);
-static int mxser_startup(struct mxser_struct *);
-static void mxser_shutdown(struct mxser_struct *);
-static int mxser_change_speed(struct mxser_struct *, struct termios *old_termios);
-static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct __user *);
-static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct __user *);
-static int mxser_get_lsr_info(struct mxser_struct *, unsigned int __user *);
-static void mxser_send_break(struct mxser_struct *, int);
+static void mxser_receive_chars(struct mxser_port *, int *);
+static void mxser_transmit_chars(struct mxser_port *);
+static void mxser_check_modem_status(struct mxser_port *, int);
+static int mxser_block_til_ready(struct tty_struct *, struct file *,
+		struct mxser_port *);
+static int mxser_startup(struct mxser_port *);
+static void mxser_shutdown(struct mxser_port *);
+static int mxser_change_speed(struct mxser_port *, struct termios *);
+static int mxser_get_serial_info(struct mxser_port *,
+		struct serial_struct __user *);
+static int mxser_set_serial_info(struct mxser_port *,
+		struct serial_struct __user *);
+static int mxser_get_lsr_info(struct mxser_port *, unsigned int __user *);
+static void mxser_send_break(struct mxser_port *, int);
 static int mxser_tiocmget(struct tty_struct *, struct file *);
-static int mxser_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int);
-static int mxser_set_baud(struct mxser_struct *info, long newspd);
-static void mxser_wait_until_sent(struct tty_struct *tty, int timeout);
+static int mxser_tiocmset(struct tty_struct *, struct file *, unsigned int,
+		unsigned int);
+static int mxser_set_baud(struct mxser_port *, long);
+static void mxser_wait_until_sent(struct tty_struct *, int);
 
-static void mxser_startrx(struct tty_struct *tty);
-static void mxser_stoprx(struct tty_struct *tty);
+static void mxser_startrx(struct tty_struct *);
+static void mxser_stoprx(struct tty_struct *);
 
 
 static int CheckIsMoxaMust(int io)
@@ -530,18 +520,18 @@ static void __exit mxser_module_exit(void)
 	for (i = 0; i < MXSER_BOARDS; i++) {
 		struct pci_dev *pdev;
 
-		if (mxsercfg[i].board_type == -1)
+		if (mxser_boards[i].board_type == -1)
 			continue;
 		else {
-			pdev = mxsercfg[i].pciInfo.pdev;
-			free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]);
+			pdev = mxser_boards[i].pdev;
+			free_irq(mxser_boards[i].irq, &mxser_boards[i]);
 			if (pdev != NULL) {	/* PCI */
 				release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2));
 				release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3));
 				pci_dev_put(pdev);
 			} else {
-				release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports);
-				release_region(mxsercfg[i].vector, 1);
+				release_region(mxser_boards[i].ports[0].ioaddr, 8 * mxser_boards[i].nports);
+				release_region(mxser_boards[i].vector, 1);
 			}
 		}
 	}
@@ -549,7 +539,7 @@ static void __exit mxser_module_exit(void)
 		printk(KERN_DEBUG "Done.\n");
 }
 
-static void process_txrx_fifo(struct mxser_struct *info)
+static void process_txrx_fifo(struct mxser_port *info)
 {
 	int i;
 
@@ -558,60 +548,44 @@ static void process_txrx_fifo(struct mxser_struct *info)
 		info->rx_high_water = 1;
 		info->rx_low_water = 1;
 		info->xmit_fifo_size = 1;
-	} else {
-		for (i = 0; i < UART_INFO_NUM; i++) {
-			if (info->IsMoxaMustChipFlag == Gpci_uart_info[i].type) {
+	} else
+		for (i = 0; i < UART_INFO_NUM; i++)
+			if (info->board->chip_flag == Gpci_uart_info[i].type) {
 				info->rx_trigger = Gpci_uart_info[i].rx_trigger;
 				info->rx_low_water = Gpci_uart_info[i].rx_low_water;
 				info->rx_high_water = Gpci_uart_info[i].rx_high_water;
 				info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
 				break;
 			}
-		}
-	}
 }
 
-static int mxser_initbrd(int board, struct mxser_hwconf *hwconf)
+static int mxser_initbrd(struct mxser_board *brd)
 {
-	struct mxser_struct *info;
+	struct mxser_port *info;
+	unsigned int i;
 	int retval;
-	int i, n;
 
-	n = board * MXSER_PORTS_PER_BOARD;
-	info = &mxvar_table[n];
 	/*if (verbose) */  {
-		printk(KERN_DEBUG "        ttyM%d - ttyM%d ",
-			n, n + hwconf->ports - 1);
 		printk(" max. baud rate = %d bps.\n",
-			hwconf->MaxCanSetBaudRate[0]);
+			brd->ports[0].max_baud);
 	}
 
-	for (i = 0; i < hwconf->ports; i++, n++, info++) {
-		info->port = n;
-		info->base = hwconf->ioaddr[i];
-		info->irq = hwconf->irq;
-		info->vector = hwconf->vector;
-		info->vectormask = hwconf->vector_mask;
-		info->opmode_ioaddr = hwconf->opmode_ioaddr[i];	/* add by Victor Yu. 01-05-2004 */
+	for (i = 0; i < brd->nports; i++) {
+		info = &brd->ports[i];
+		info->board = brd;
 		info->stop_rx = 0;
 		info->ldisc_stop_rx = 0;
 
-		info->IsMoxaMustChipFlag = hwconf->IsMoxaMustChipFlag;
 		/* Enhance mode enabled here */
-		if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) {
-			ENABLE_MOXA_MUST_ENCHANCE_MODE(info->base);
-		}
+		if (brd->chip_flag != MOXA_OTHER_UART)
+			ENABLE_MOXA_MUST_ENCHANCE_MODE(info->ioaddr);
 
 		info->flags = ASYNC_SHARE_IRQ;
-		info->type = hwconf->uart_type;
-		info->baud_base = hwconf->baud_base[i];
-
-		info->MaxCanSetBaudRate = hwconf->MaxCanSetBaudRate[i];
+		info->type = brd->uart_type;
 
 		process_txrx_fifo(info);
 
-
-		info->custom_divisor = hwconf->baud_base[i] * 16;
+		info->custom_divisor = info->baud_base * 16;
 		info->close_delay = 5 * HZ / 10;
 		info->closing_wait = 30 * HZ;
 		INIT_WORK(&info->tqueue, mxser_do_softint, info);
@@ -622,118 +596,102 @@ static int mxser_initbrd(int board, struct mxser_hwconf *hwconf)
 		memset(&info->mon_data, 0, sizeof(struct mxser_mon));
 		info->err_shadow = 0;
 		spin_lock_init(&info->slock);
+
+		/* before set INT ISR, disable all int */
+		outb(inb(info->ioaddr + UART_IER) & 0xf0,
+			info->ioaddr + UART_IER);
 	}
 	/*
 	 * Allocate the IRQ if necessary
 	 */
 
-
-	/* before set INT ISR, disable all int */
-	for (i = 0; i < hwconf->ports; i++) {
-		outb(inb(hwconf->ioaddr[i] + UART_IER) & 0xf0,
-			hwconf->ioaddr[i] + UART_IER);
-	}
-
-	n = board * MXSER_PORTS_PER_BOARD;
-	info = &mxvar_table[n];
-
-	retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info),
-				"mxser", info);
+	retval = request_irq(brd->irq, mxser_interrupt,
+			(brd->ports[0].flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED :
+			IRQF_DISABLED, "mxser", brd);
 	if (retval) {
-		printk(KERN_ERR "Board %d: %s",
-			board, mxser_brdname[hwconf->board_type - 1]);
-		printk("  Request irq failed, IRQ (%d) may conflict with"
-			" another device.\n", info->irq);
+		printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
+			"conflict with another device.\n",
+			mxser_brdname[brd->board_type - 1], brd->irq);
 		return retval;
 	}
 	return 0;
 }
 
-static void mxser_getcfg(int board, struct mxser_hwconf *hwconf)
-{
-	mxsercfg[board] = *hwconf;
-}
-
-#ifdef CONFIG_PCI
-static int mxser_get_PCI_conf(int busnum, int devnum, int board_type, struct mxser_hwconf *hwconf)
+static int mxser_get_PCI_conf(int board_type, struct mxser_board *brd,
+		struct pci_dev *pdev)
 {
-	int i, j;
-	/* unsigned int val; */
+	unsigned int i, j;
 	unsigned long ioaddress;
-	struct pci_dev *pdev = hwconf->pciInfo.pdev;
 
 	/* io address */
-	hwconf->board_type = board_type;
-	hwconf->ports = mxser_numports[board_type - 1];
+	brd->board_type = board_type;
+	brd->nports = mxser_numports[board_type - 1];
 	ioaddress = pci_resource_start(pdev, 2);
 	request_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2),
 			"mxser(IO)");
 
-	for (i = 0; i < hwconf->ports; i++)
-		hwconf->ioaddr[i] = ioaddress + 8 * i;
+	for (i = 0; i < brd->nports; i++)
+		brd->ports[i].ioaddr = ioaddress + 8 * i;
 
 	/* vector */
 	ioaddress = pci_resource_start(pdev, 3);
 	request_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3),
 			"mxser(vector)");
-	hwconf->vector = ioaddress;
+	brd->vector = ioaddress;
 
 	/* irq */
-	hwconf->irq = hwconf->pciInfo.pdev->irq;
+	brd->irq = pdev->irq;
 
-	hwconf->IsMoxaMustChipFlag = CheckIsMoxaMust(hwconf->ioaddr[0]);
-	hwconf->uart_type = PORT_16550A;
-	hwconf->vector_mask = 0;
+	brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr);
+	brd->uart_type = PORT_16550A;
+	brd->vector_mask = 0;
 
-
-	for (i = 0; i < hwconf->ports; i++) {
+	for (i = 0; i < brd->nports; i++) {
 		for (j = 0; j < UART_INFO_NUM; j++) {
-			if (Gpci_uart_info[j].type == hwconf->IsMoxaMustChipFlag) {
-				hwconf->MaxCanSetBaudRate[i] = Gpci_uart_info[j].max_baud;
+			if (Gpci_uart_info[j].type == brd->chip_flag) {
+				brd->ports[i].max_baud =
+					Gpci_uart_info[j].max_baud;
 
 				/* exception....CP-102 */
 				if (board_type == MXSER_BOARD_CP102)
-					hwconf->MaxCanSetBaudRate[i] = 921600;
+					brd->ports[i].max_baud = 921600;
 				break;
 			}
 		}
 	}
 
-	if (hwconf->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID) {
-		for (i = 0; i < hwconf->ports; i++) {
+	if (brd->chip_flag == MOXA_MUST_MU860_HWID) {
+		for (i = 0; i < brd->nports; i++) {
 			if (i < 4)
-				hwconf->opmode_ioaddr[i] = ioaddress + 4;
+				brd->ports[i].opmode_ioaddr = ioaddress + 4;
 			else
-				hwconf->opmode_ioaddr[i] = ioaddress + 0x0c;
+				brd->ports[i].opmode_ioaddr = ioaddress + 0x0c;
 		}
 		outb(0, ioaddress + 4);	/* default set to RS232 mode */
 		outb(0, ioaddress + 0x0c);	/* default set to RS232 mode */
 	}
 
-	for (i = 0; i < hwconf->ports; i++) {
-		hwconf->vector_mask |= (1 << i);
-		hwconf->baud_base[i] = 921600;
+	for (i = 0; i < brd->nports; i++) {
+		brd->vector_mask |= (1 << i);
+		brd->ports[i].baud_base = 921600;
 	}
 	return 0;
 }
-#endif
 
 static int mxser_init(void)
 {
-	int i, m, retval, b, n;
 	struct pci_dev *pdev = NULL;
-	int index;
-	unsigned char busnum, devnum;
-	struct mxser_hwconf hwconf;
+	struct mxser_board *brd;
+	unsigned int i, m;
+	int retval, b, n;
 
 	mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
 	if (!mxvar_sdriver)
 		return -ENOMEM;
 	spin_lock_init(&gm_lock);
 
-	for (i = 0; i < MXSER_BOARDS; i++) {
-		mxsercfg[i].board_type = -1;
-	}
+	for (i = 0; i < MXSER_BOARDS; i++)
+		mxser_boards[i].board_type = -1;
 
 	printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n",
 		MXSER_VERSION);
@@ -756,13 +714,12 @@ static int mxser_init(void)
 	mxvar_sdriver->termios_locked = mxvar_termios_locked;
 
 	mxvar_diagflag = 0;
-	memset(mxvar_table, 0, MXSER_PORTS * sizeof(struct mxser_struct));
+	memset(mxser_boards, 0, sizeof(mxser_boards));
 	memset(&mxvar_log, 0, sizeof(struct mxser_log));
 
 	memset(&mxser_msr, 0, sizeof(unsigned char) * (MXSER_PORTS + 1));
 	memset(&mon_data_ext, 0, sizeof(struct mxser_mon_ext));
 	memset(&mxser_set_baud_method, 0, sizeof(int) * (MXSER_PORTS + 1));
-	memset(&hwconf, 0, sizeof(struct mxser_hwconf));
 
 	m = 0;
 	/* Start finding ISA boards here */
@@ -772,11 +729,12 @@ static int mxser_init(void)
 		if (!(cap = mxserBoardCAP[b]))
 			continue;
 
-		retval = mxser_get_ISA_conf(cap, &hwconf);
+		brd = &mxser_boards[m];
+		retval = mxser_get_ISA_conf(cap, brd);
 
 		if (retval != 0)
 			printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n",
-				mxser_brdname[hwconf.board_type - 1], ioaddr[b]);
+				mxser_brdname[brd->board_type - 1], ioaddr[b]);
 
 		if (retval <= 0) {
 			if (retval == MXSER_ERR_IRQ)
@@ -795,17 +753,10 @@ static int mxser_init(void)
 			continue;
 		}
 
-		hwconf.pciInfo.busNum = 0;
-		hwconf.pciInfo.devNum = 0;
-		hwconf.pciInfo.pdev = NULL;
+		brd->pdev = NULL;
 
-		mxser_getcfg(m, &hwconf);
-		/*
-		 * init mxsercfg first,
-		 * or mxsercfg data is not correct on ISR.
-		 */
 		/* mxser_initbrd will hook ISR. */
-		if (mxser_initbrd(m, &hwconf) < 0)
+		if (mxser_initbrd(brd) < 0)
 			continue;
 
 		m++;
@@ -818,11 +769,12 @@ static int mxser_init(void)
 		if (!(cap = ioaddr[b]))
 			continue;
 
-		retval = mxser_get_ISA_conf(cap, &hwconf);
+		brd = &mxser_boards[m];
+		retval = mxser_get_ISA_conf(cap, &mxser_boards[m]);
 
 		if (retval != 0)
 			printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n",
-				mxser_brdname[hwconf.board_type - 1], ioaddr[b]);
+				mxser_brdname[brd->board_type - 1], ioaddr[b]);
 
 		if (retval <= 0) {
 			if (retval == MXSER_ERR_IRQ)
@@ -841,26 +793,16 @@ static int mxser_init(void)
 			continue;
 		}
 
-		hwconf.pciInfo.busNum = 0;
-		hwconf.pciInfo.devNum = 0;
-		hwconf.pciInfo.pdev = NULL;
-
-		mxser_getcfg(m, &hwconf);
-		/*
-		 * init mxsercfg first,
-		 * or mxsercfg data is not correct on ISR.
-		 */
+		brd->pdev = NULL;
 		/* mxser_initbrd will hook ISR. */
-		if (mxser_initbrd(m, &hwconf) < 0)
+		if (mxser_initbrd(brd) < 0)
 			continue;
 
 		m++;
 	}
 
 	/* start finding PCI board here */
-#ifdef CONFIG_PCI
 	n = ARRAY_SIZE(mxser_pcibrds) - 1;
-	index = 0;
 	b = 0;
 	while (b < n) {
 		pdev = pci_get_device(mxser_pcibrds[b].vendor,
@@ -869,13 +811,9 @@ static int mxser_init(void)
 			b++;
 			continue;
 		}
-		hwconf.pciInfo.busNum = busnum = pdev->bus->number;
-		hwconf.pciInfo.devNum = devnum = PCI_SLOT(pdev->devfn) << 3;
-		hwconf.pciInfo.pdev = pdev;
 		printk(KERN_INFO "Found MOXA %s board(BusNo=%d,DevNo=%d)\n",
 			mxser_brdname[(int) (mxser_pcibrds[b].driver_data) - 1],
-			busnum, devnum >> 3);
-		index++;
+			pdev->bus->number, PCI_SLOT(pdev->devfn));
 		if (m >= MXSER_BOARDS)
 			printk(KERN_ERR
 				"Too many Smartio/Industio family boards find "
@@ -887,9 +825,11 @@ static int mxser_init(void)
 					"fail !\n");
 				continue;
 			}
-			retval = mxser_get_PCI_conf(busnum, devnum,
+			brd = &mxser_boards[m];
+			brd->pdev = pdev;
+			retval = mxser_get_PCI_conf(
 					(int)mxser_pcibrds[b].driver_data,
-					&hwconf);
+					brd, pdev);
 			if (retval < 0) {
 				if (retval == MXSER_ERR_IRQ)
 					printk(KERN_ERR
@@ -909,12 +849,8 @@ static int mxser_init(void)
 						"board not configured\n");
 				continue;
 			}
-			mxser_getcfg(m, &hwconf);
-			/* init mxsercfg first,
-			 * or mxsercfg data is not correct on ISR.
-			 */
 			/* mxser_initbrd will hook ISR. */
-			if (mxser_initbrd(m, &hwconf) < 0)
+			if (mxser_initbrd(brd) < 0)
 				continue;
 			m++;
 			/* Keep an extra reference if we succeeded. It will
@@ -922,7 +858,6 @@ static int mxser_init(void)
 			pci_dev_get(pdev);
 		}
 	}
-#endif
 
 	retval = tty_register_driver(mxvar_sdriver);
 	if (retval) {
@@ -931,10 +866,10 @@ static int mxser_init(void)
 		put_tty_driver(mxvar_sdriver);
 
 		for (i = 0; i < MXSER_BOARDS; i++) {
-			if (mxsercfg[i].board_type == -1)
+			if (mxser_boards[i].board_type == -1)
 				continue;
 			else {
-				free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]);
+				free_irq(mxser_boards[i].irq, &mxser_boards[i]);
 				/* todo: release io, vector */
 			}
 		}
@@ -946,7 +881,7 @@ static int mxser_init(void)
 
 static void mxser_do_softint(void *private_)
 {
-	struct mxser_struct *info = private_;
+	struct mxser_port *info = private_;
 	struct tty_struct *tty;
 
 	tty = info->tty;
@@ -957,7 +892,7 @@ static void mxser_do_softint(void *private_)
 		tty_hangup(tty);
 }
 
-static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxser_struct *info)
+static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
 {
 	unsigned char status = 0;
 
@@ -980,7 +915,7 @@ static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxse
  */
 static int mxser_open(struct tty_struct *tty, struct file *filp)
 {
-	struct mxser_struct *info;
+	struct mxser_port *info;
 	int retval, line;
 
 	/* initialize driver_data in case something fails */
@@ -991,8 +926,8 @@ static int mxser_open(struct tty_struct *tty, struct file *filp)
 		return 0;
 	if (line < 0 || line > MXSER_PORTS)
 		return -ENODEV;
-	info = mxvar_table + line;
-	if (!info->base)
+	info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD];
+	if (!info->ioaddr)
 		return -ENODEV;
 
 	tty->driver_data = info;
@@ -1038,7 +973,7 @@ static int mxser_open(struct tty_struct *tty, struct file *filp)
  */
 static void mxser_close(struct tty_struct *tty, struct file *filp)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 
 	unsigned long timeout;
 	unsigned long flags;
@@ -1069,7 +1004,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 	}
 	if (--info->count < 0) {
 		printk(KERN_ERR "mxser_close: bad serial port count for "
-			"ttys%d: %d\n", info->port, info->count);
+			"ttys%d: %d\n", tty->index, info->count);
 		info->count = 0;
 	}
 	if (info->count) {
@@ -1098,20 +1033,20 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 	 * line status register.
 	 */
 	info->IER &= ~UART_IER_RLSI;
-	if (info->IsMoxaMustChipFlag)
+	if (info->board->chip_flag)
 		info->IER &= ~MOXA_MUST_RECV_ISR;
 /* by William
 	info->read_status_mask &= ~UART_LSR_DR;
 */
 	if (info->flags & ASYNC_INITIALIZED) {
-		outb(info->IER, info->base + UART_IER);
+		outb(info->IER, info->ioaddr + UART_IER);
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
 		 * has completely drained; this is especially
 		 * important if there is a transmit FIFO!
 		 */
 		timeout = jiffies + HZ;
-		while (!(inb(info->base + UART_LSR) & UART_LSR_TEMT)) {
+		while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
 			schedule_timeout_interruptible(5);
 			if (time_after(jiffies, timeout))
 				break;
@@ -1146,7 +1081,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
 {
 	int c, total = 0;
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 	if (!info->xmit_buf)
@@ -1174,11 +1109,12 @@ static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int cou
 			/*&& !(info->IER & UART_IER_THRI)*/) {
 		if (!tty->hw_stopped ||
 				(info->type == PORT_16550A) ||
-				(info->IsMoxaMustChipFlag)) {
+				(info->board->chip_flag)) {
 			spin_lock_irqsave(&info->slock, flags);
-			outb(info->IER & ~UART_IER_THRI, info->base + UART_IER);
+			outb(info->IER & ~UART_IER_THRI, info->ioaddr +
+					UART_IER);
 			info->IER |= UART_IER_THRI;
-			outb(info->IER, info->base + UART_IER);
+			outb(info->IER, info->ioaddr + UART_IER);
 			spin_unlock_irqrestore(&info->slock, flags);
 		}
 	}
@@ -1187,7 +1123,7 @@ static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int cou
 
 static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 	if (!info->xmit_buf)
@@ -1204,11 +1140,11 @@ static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
 	if (!tty->stopped /*&& !(info->IER & UART_IER_THRI)*/) {
 		if (!tty->hw_stopped ||
 				(info->type == PORT_16550A) ||
-				info->IsMoxaMustChipFlag) {
+				info->board->chip_flag) {
 			spin_lock_irqsave(&info->slock, flags);
-			outb(info->IER & ~UART_IER_THRI, info->base + UART_IER);
+			outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
 			info->IER |= UART_IER_THRI;
-			outb(info->IER, info->base + UART_IER);
+			outb(info->IER, info->ioaddr + UART_IER);
 			spin_unlock_irqrestore(&info->slock, flags);
 		}
 	}
@@ -1217,7 +1153,7 @@ static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
 
 static void mxser_flush_chars(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 	if (info->xmit_cnt <= 0 ||
@@ -1225,22 +1161,22 @@ static void mxser_flush_chars(struct tty_struct *tty)
 			!info->xmit_buf ||
 			(tty->hw_stopped &&
 			 (info->type != PORT_16550A) &&
-			 (!info->IsMoxaMustChipFlag)
+			 (!info->board->chip_flag)
 			))
 		return;
 
 	spin_lock_irqsave(&info->slock, flags);
 
-	outb(info->IER & ~UART_IER_THRI, info->base + UART_IER);
+	outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
 	info->IER |= UART_IER_THRI;
-	outb(info->IER, info->base + UART_IER);
+	outb(info->IER, info->ioaddr + UART_IER);
 
 	spin_unlock_irqrestore(&info->slock, flags);
 }
 
 static int mxser_write_room(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	int ret;
 
 	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
@@ -1251,10 +1187,10 @@ static int mxser_write_room(struct tty_struct *tty)
 
 static int mxser_chars_in_buffer(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	int len = info->xmit_cnt;
 
-	if (!(inb(info->base + UART_LSR) & UART_LSR_THRE))
+	if (!(inb(info->ioaddr + UART_LSR) & UART_LSR_THRE))
 		len++;
 
 	return len;
@@ -1262,7 +1198,7 @@ static int mxser_chars_in_buffer(struct tty_struct *tty)
 
 static void mxser_flush_buffer(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	char fcr;
 	unsigned long flags;
 
@@ -1271,10 +1207,10 @@ static void mxser_flush_buffer(struct tty_struct *tty)
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 
 	/* below added by shinhay */
-	fcr = inb(info->base + UART_FCR);
+	fcr = inb(info->ioaddr + UART_FCR);
 	outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
-		info->base + UART_FCR);
-	outb(fcr, info->base + UART_FCR);
+		info->ioaddr + UART_FCR);
+	outb(fcr, info->ioaddr + UART_FCR);
 
 	spin_unlock_irqrestore(&info->slock, flags);
 	/* above added by shinhay */
@@ -1286,7 +1222,7 @@ static void mxser_flush_buffer(struct tty_struct *tty)
 
 static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	int retval;
 	struct async_icount cprev, cnow;	/* kernel counter temps */
 	struct serial_icounter_struct __user *p_cuser;
@@ -1305,7 +1241,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int c
 		int shiftbit;
 		unsigned char val, mask;
 
-		p = info->port % 4;
+		p = tty->index % 4;
 		if (cmd == MOXA_SET_OP_MODE) {
 			if (get_user(opmode, (int __user *) argp))
 				return -EFAULT;
@@ -1465,7 +1401,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int c
 
 			len = mxser_chars_in_buffer(tty);
 
-			lsr = inb(info->base + UART_LSR) & UART_LSR_TEMT;
+			lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT;
 
 			len += (lsr ? 0 : 1);
 
@@ -1479,10 +1415,10 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int c
 
 			/* info->mon_data.ser_param = tty->termios->c_cflag; */
 
-			status = mxser_get_msr(info->base, 1, info->port, info);
+			status = mxser_get_msr(info->ioaddr, 1, tty->index);
 			mxser_check_modem_status(info, status);
 
-			mcr = inb(info->base + UART_MCR);
+			mcr = inb(info->ioaddr + UART_MCR);
 			if (mcr & MOXA_MUST_MCR_XON_FLAG)
 				info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
 			else
@@ -1518,7 +1454,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int c
 
 			if (get_user(method, (int __user *)argp))
 				return -EFAULT;
-			mxser_set_baud_method[info->port] = method;
+			mxser_set_baud_method[tty->index] = method;
 			if (copy_to_user(argp, &method, sizeof(int)))
 				return -EFAULT;
 
@@ -1536,14 +1472,17 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int c
 
 static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 {
-	int i, result, status;
+	struct mxser_port *port;
+	int result, status;
+	unsigned int i, j;
 
 	switch (cmd) {
 	case MOXA_GET_CONF:
-		if (copy_to_user(argp, mxsercfg,
+/*		if (copy_to_user(argp, mxsercfg,
 				sizeof(struct mxser_hwconf) * 4))
 			return -EFAULT;
-		return 0;
+		return 0;*/
+		return -ENXIO;
 	case MOXA_GET_MAJOR:
 		if (copy_to_user(argp, &ttymajor, sizeof(int)))
 			return -EFAULT;
@@ -1556,96 +1495,106 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
 	case MOXA_CHKPORTENABLE:
 		result = 0;
-		for (i = 0; i < MXSER_PORTS; i++) {
-			if (mxvar_table[i].base)
-				result |= (1 << i);
-		}
+
+		for (i = 0; i < MXSER_BOARDS; i++)
+			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
+				if (mxser_boards[i].ports[j].ioaddr)
+					result |= (1 << i);
+
 		return put_user(result, (unsigned long __user *)argp);
 	case MOXA_GETDATACOUNT:
 		if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
 			return -EFAULT;
 		return 0;
 	case MOXA_GETMSTATUS:
-		for (i = 0; i < MXSER_PORTS; i++) {
-			GMStatus[i].ri = 0;
-			if (!mxvar_table[i].base) {
-				GMStatus[i].dcd = 0;
-				GMStatus[i].dsr = 0;
-				GMStatus[i].cts = 0;
-				continue;
-			}
+		for (i = 0; i < MXSER_BOARDS; i++)
+			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+				port = &mxser_boards[i].ports[j];
+
+				GMStatus[i].ri = 0;
+				if (!port->ioaddr) {
+					GMStatus[i].dcd = 0;
+					GMStatus[i].dsr = 0;
+					GMStatus[i].cts = 0;
+					continue;
+				}
 
-			if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios)
-				GMStatus[i].cflag = mxvar_table[i].normal_termios.c_cflag;
-			else
-				GMStatus[i].cflag = mxvar_table[i].tty->termios->c_cflag;
+				if (!port->tty || !port->tty->termios)
+					GMStatus[i].cflag =
+						port->normal_termios.c_cflag;
+				else
+					GMStatus[i].cflag =
+						port->tty->termios->c_cflag;
 
-			status = inb(mxvar_table[i].base + UART_MSR);
-			if (status & 0x80 /*UART_MSR_DCD */ )
-				GMStatus[i].dcd = 1;
-			else
-				GMStatus[i].dcd = 0;
+				status = inb(port->ioaddr + UART_MSR);
+				if (status & 0x80 /*UART_MSR_DCD */ )
+					GMStatus[i].dcd = 1;
+				else
+					GMStatus[i].dcd = 0;
 
-			if (status & 0x20 /*UART_MSR_DSR */ )
-				GMStatus[i].dsr = 1;
-			else
-				GMStatus[i].dsr = 0;
+				if (status & 0x20 /*UART_MSR_DSR */ )
+					GMStatus[i].dsr = 1;
+				else
+					GMStatus[i].dsr = 0;
 
 
-			if (status & 0x10 /*UART_MSR_CTS */ )
-				GMStatus[i].cts = 1;
-			else
-				GMStatus[i].cts = 0;
-		}
+				if (status & 0x10 /*UART_MSR_CTS */ )
+					GMStatus[i].cts = 1;
+				else
+					GMStatus[i].cts = 0;
+			}
 		if (copy_to_user(argp, GMStatus,
 				sizeof(struct mxser_mstatus) * MXSER_PORTS))
 			return -EFAULT;
 		return 0;
 	case MOXA_ASPP_MON_EXT: {
-			int status, p, shiftbit;
-			unsigned long opmode;
-			unsigned cflag, iflag;
+		int status, p, shiftbit;
+		unsigned long opmode;
+		unsigned cflag, iflag;
 
-			for (i = 0; i < MXSER_PORTS; i++) {
-				if (!mxvar_table[i].base)
+		for (i = 0; i < MXSER_BOARDS; i++)
+			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+				port = &mxser_boards[i].ports[j];
+				if (!port->ioaddr)
 					continue;
 
-				status = mxser_get_msr(mxvar_table[i].base, 0,
-							i, &(mxvar_table[i]));
-				/*
-				mxser_check_modem_status(&mxvar_table[i],
-								status);
-				*/
+				status = mxser_get_msr(port->ioaddr, 0, i);
+/*				mxser_check_modem_status(port, status); */
+
 				if (status & UART_MSR_TERI)
-					mxvar_table[i].icount.rng++;
+					port->icount.rng++;
 				if (status & UART_MSR_DDSR)
-					mxvar_table[i].icount.dsr++;
+					port->icount.dsr++;
 				if (status & UART_MSR_DDCD)
-					mxvar_table[i].icount.dcd++;
+					port->icount.dcd++;
 				if (status & UART_MSR_DCTS)
-					mxvar_table[i].icount.cts++;
-
-				mxvar_table[i].mon_data.modem_status = status;
-				mon_data_ext.rx_cnt[i] = mxvar_table[i].mon_data.rxcnt;
-				mon_data_ext.tx_cnt[i] = mxvar_table[i].mon_data.txcnt;
-				mon_data_ext.up_rxcnt[i] = mxvar_table[i].mon_data.up_rxcnt;
-				mon_data_ext.up_txcnt[i] = mxvar_table[i].mon_data.up_txcnt;
-				mon_data_ext.modem_status[i] = mxvar_table[i].mon_data.modem_status;
-				mon_data_ext.baudrate[i] = mxvar_table[i].realbaud;
-
-				if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) {
-					cflag = mxvar_table[i].normal_termios.c_cflag;
-					iflag = mxvar_table[i].normal_termios.c_iflag;
+					port->icount.cts++;
+
+				port->mon_data.modem_status = status;
+				mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt;
+				mon_data_ext.tx_cnt[i] = port->mon_data.txcnt;
+				mon_data_ext.up_rxcnt[i] =
+					port->mon_data.up_rxcnt;
+				mon_data_ext.up_txcnt[i] =
+					port->mon_data.up_txcnt;
+				mon_data_ext.modem_status[i] =
+					port->mon_data.modem_status;
+				mon_data_ext.baudrate[i] = port->realbaud;
+
+				if (!port->tty || !port->tty->termios) {
+					cflag = port->normal_termios.c_cflag;
+					iflag = port->normal_termios.c_iflag;
 				} else {
-					cflag = mxvar_table[i].tty->termios->c_cflag;
-					iflag = mxvar_table[i].tty->termios->c_iflag;
+					cflag = port->tty->termios->c_cflag;
+					iflag = port->tty->termios->c_iflag;
 				}
 
 				mon_data_ext.databits[i] = cflag & CSIZE;
 
 				mon_data_ext.stopbits[i] = cflag & CSTOPB;
 
-				mon_data_ext.parity[i] = cflag & (PARENB | PARODD | CMSPAR);
+				mon_data_ext.parity[i] =
+					cflag & (PARENB | PARODD | CMSPAR);
 
 				mon_data_ext.flowctrl[i] = 0x00;
 
@@ -1655,26 +1604,26 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 				if (iflag & (IXON | IXOFF))
 					mon_data_ext.flowctrl[i] |= 0x0C;
 
-				if (mxvar_table[i].type == PORT_16550A)
+				if (port->type == PORT_16550A)
 					mon_data_ext.fifo[i] = 1;
 				else
 					mon_data_ext.fifo[i] = 0;
 
 				p = i % 4;
 				shiftbit = p * 2;
-				opmode = inb(mxvar_table[i].opmode_ioaddr) >> shiftbit;
+				opmode = inb(port->opmode_ioaddr) >> shiftbit;
 				opmode &= OP_MODE_MASK;
 
 				mon_data_ext.iftype[i] = opmode;
 
 			}
-			if (copy_to_user(argp, &mon_data_ext, sizeof(struct mxser_mon_ext)))
+			if (copy_to_user(argp, &mon_data_ext,
+						sizeof(mon_data_ext)))
 				return -EFAULT;
 
 			return 0;
 
-		}
-	default:
+	} default:
 		return -ENOIOCTLCMD;
 	}
 	return 0;
@@ -1682,31 +1631,31 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
 static void mxser_stoprx(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 
 	info->ldisc_stop_rx = 1;
 	if (I_IXOFF(tty)) {
 		/* following add by Victor Yu. 09-02-2002 */
-		if (info->IsMoxaMustChipFlag) {
+		if (info->board->chip_flag) {
 			info->IER &= ~MOXA_MUST_RECV_ISR;
-			outb(info->IER, info->base + UART_IER);
+			outb(info->IER, info->ioaddr + UART_IER);
 		} else if (!(info->flags & ASYNC_CLOSING)) {
 			info->x_char = STOP_CHAR(tty);
-			outb(0, info->base + UART_IER);
+			outb(0, info->ioaddr + UART_IER);
 			info->IER |= UART_IER_THRI;
-			outb(info->IER, info->base + UART_IER);
+			outb(info->IER, info->ioaddr + UART_IER);
 		}
 	}
 
 	if (info->tty->termios->c_cflag & CRTSCTS) {
 		info->MCR &= ~UART_MCR_RTS;
-		outb(info->MCR, info->base + UART_MCR);
+		outb(info->MCR, info->ioaddr + UART_MCR);
 	}
 }
 
 static void mxser_startrx(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 
 	info->ldisc_stop_rx = 0;
 	if (I_IXOFF(tty)) {
@@ -1714,21 +1663,21 @@ static void mxser_startrx(struct tty_struct *tty)
 			info->x_char = 0;
 		else {
 			/* following add by Victor Yu. 09-02-2002 */
-			if (info->IsMoxaMustChipFlag) {
+			if (info->board->chip_flag) {
 				info->IER |= MOXA_MUST_RECV_ISR;
-				outb(info->IER, info->base + UART_IER);
+				outb(info->IER, info->ioaddr + UART_IER);
 			} else if (!(info->flags & ASYNC_CLOSING)) {
 				info->x_char = START_CHAR(tty);
-				outb(0, info->base + UART_IER);
+				outb(0, info->ioaddr + UART_IER);
 				info->IER |= UART_IER_THRI;
-				outb(info->IER, info->base + UART_IER);
+				outb(info->IER, info->ioaddr + UART_IER);
 			}
 		}
 	}
 
 	if (info->tty->termios->c_cflag & CRTSCTS) {
 		info->MCR |= UART_MCR_RTS;
-		outb(info->MCR, info->base + UART_MCR);
+		outb(info->MCR, info->ioaddr + UART_MCR);
 	}
 }
 
@@ -1738,7 +1687,7 @@ static void mxser_startrx(struct tty_struct *tty)
  */
 static void mxser_throttle(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->slock, flags);
@@ -1748,7 +1697,7 @@ static void mxser_throttle(struct tty_struct *tty)
 
 static void mxser_unthrottle(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->slock, flags);
@@ -1758,7 +1707,7 @@ static void mxser_unthrottle(struct tty_struct *tty)
 
 static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 	if ((tty->termios->c_cflag != old_termios->c_cflag) ||
@@ -1779,9 +1728,9 @@ static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termio
 		tty->stopped = 0;
 
 		/* following add by Victor Yu. 09-02-2002 */
-		if (info->IsMoxaMustChipFlag) {
+		if (info->board->chip_flag) {
 			spin_lock_irqsave(&info->slock, flags);
-			DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
+			DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
 			spin_unlock_irqrestore(&info->slock, flags);
 		}
 		/* above add by Victor Yu. 09-02-2002 */
@@ -1798,28 +1747,28 @@ static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termio
  */
 static void mxser_stop(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->slock, flags);
 	if (info->IER & UART_IER_THRI) {
 		info->IER &= ~UART_IER_THRI;
-		outb(info->IER, info->base + UART_IER);
+		outb(info->IER, info->ioaddr + UART_IER);
 	}
 	spin_unlock_irqrestore(&info->slock, flags);
 }
 
 static void mxser_start(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->slock, flags);
 	if (info->xmit_cnt && info->xmit_buf
 			/* && !(info->IER & UART_IER_THRI) */) {
-		outb(info->IER & ~UART_IER_THRI, info->base + UART_IER);
+		outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
 		info->IER |= UART_IER_THRI;
-		outb(info->IER, info->base + UART_IER);
+		outb(info->IER, info->ioaddr + UART_IER);
 	}
 	spin_unlock_irqrestore(&info->slock, flags);
 }
@@ -1829,7 +1778,7 @@ static void mxser_start(struct tty_struct *tty)
  */
 static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long orig_jiffies, char_time;
 	int lsr;
 
@@ -1870,7 +1819,7 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
 		timeout, char_time);
 	printk("jiff=%lu...", jiffies);
 #endif
-	while (!((lsr = inb(info->base + UART_LSR)) & UART_LSR_TEMT)) {
+	while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
 		printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
 #endif
@@ -1893,7 +1842,7 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
  */
 void mxser_hangup(struct tty_struct *tty)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 
 	mxser_flush_buffer(tty);
 	mxser_shutdown(info);
@@ -1911,16 +1860,16 @@ void mxser_hangup(struct tty_struct *tty)
  */
 static void mxser_rs_break(struct tty_struct *tty, int break_state)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->slock, flags);
 	if (break_state == -1)
-		outb(inb(info->base + UART_LCR) | UART_LCR_SBC,
-			info->base + UART_LCR);
+		outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
+			info->ioaddr + UART_LCR);
 	else
-		outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC,
-			info->base + UART_LCR);
+		outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
+			info->ioaddr + UART_LCR);
 	spin_unlock_irqrestore(&info->slock, flags);
 }
 
@@ -1933,74 +1882,72 @@ static void mxser_rs_break(struct tty_struct *tty, int break_state)
 static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	int status, iir, i;
-	struct mxser_struct *info;
-	struct mxser_struct *port;
+	struct mxser_board *brd = NULL;
+	struct mxser_port *port;
 	int max, irqbits, bits, msr;
 	int pass_counter = 0;
 	unsigned int int_cnt;
 	int handled = IRQ_NONE;
 
-	port = NULL;
 	/* spin_lock(&gm_lock); */
 
-	for (i = 0; i < MXSER_BOARDS; i++) {
-		if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) {
-			port = dev_id;
+	for (i = 0; i < MXSER_BOARDS; i++)
+		if (dev_id == &mxser_boards[i]) {
+			brd = dev_id;
 			break;
 		}
-	}
 
 	if (i == MXSER_BOARDS)
 		goto irq_stop;
-	if (port == 0)
+	if (brd == NULL)
 		goto irq_stop;
-	max = mxser_numports[mxsercfg[i].board_type - 1];
+	max = mxser_numports[brd->board_type - 1];
 	while (1) {
-		irqbits = inb(port->vector) & port->vectormask;
-		if (irqbits == port->vectormask)
+		irqbits = inb(brd->vector) & brd->vector_mask;
+		if (irqbits == brd->vector_mask)
 			break;
 
 		handled = IRQ_HANDLED;
 		for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
-			if (irqbits == port->vectormask)
+			if (irqbits == brd->vector_mask)
 				break;
 			if (bits & irqbits)
 				continue;
-			info = port + i;
+			port = &brd->ports[i];
 
 			int_cnt = 0;
 			do {
 				/* following add by Victor Yu. 09-13-2002 */
-				iir = inb(info->base + UART_IIR);
+				iir = inb(port->ioaddr + UART_IIR);
 				if (iir & UART_IIR_NO_INT)
 					break;
 				iir &= MOXA_MUST_IIR_MASK;
-				if (!info->tty) {
-					status = inb(info->base + UART_LSR);
-					outb(0x27, info->base + UART_FCR);
-					inb(info->base + UART_MSR);
+				if (!port->tty) {
+					status = inb(port->ioaddr + UART_LSR);
+					outb(0x27, port->ioaddr + UART_FCR);
+					inb(port->ioaddr + UART_MSR);
 					break;
 				}
 				/* above add by Victor Yu. 09-13-2002 */
 
-				spin_lock(&info->slock);
+				spin_lock(&port->slock);
 				/* following add by Victor Yu. 09-02-2002 */
-				status = inb(info->base + UART_LSR);
+				status = inb(port->ioaddr + UART_LSR);
 
 				if (status & UART_LSR_PE)
-					info->err_shadow |= NPPI_NOTIFY_PARITY;
+					port->err_shadow |= NPPI_NOTIFY_PARITY;
 				if (status & UART_LSR_FE)
-					info->err_shadow |= NPPI_NOTIFY_FRAMING;
+					port->err_shadow |= NPPI_NOTIFY_FRAMING;
 				if (status & UART_LSR_OE)
-					info->err_shadow |=
+					port->err_shadow |=
 						NPPI_NOTIFY_HW_OVERRUN;
 				if (status & UART_LSR_BI)
-					info->err_shadow |= NPPI_NOTIFY_BREAK;
+					port->err_shadow |= NPPI_NOTIFY_BREAK;
 
-				if (info->IsMoxaMustChipFlag) {
+				if (port->board->chip_flag) {
 					/*
 					   if ( (status & 0x02) && !(status & 0x01) ) {
-					   outb(info->base+UART_FCR,  0x23);
+					   outb(port->ioaddr+UART_FCR,  0x23);
 					   continue;
 					   }
 					 */
@@ -2008,33 +1955,33 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 					    iir == MOXA_MUST_IIR_RDA ||
 					    iir == MOXA_MUST_IIR_RTO ||
 					    iir == MOXA_MUST_IIR_LSR)
-						mxser_receive_chars(info,
+						mxser_receive_chars(port,
 								&status);
 
 				} else {
 					/* above add by Victor Yu. 09-02-2002 */
 
-					status &= info->read_status_mask;
+					status &= port->read_status_mask;
 					if (status & UART_LSR_DR)
-						mxser_receive_chars(info,
+						mxser_receive_chars(port,
 								&status);
 				}
-				msr = inb(info->base + UART_MSR);
+				msr = inb(port->ioaddr + UART_MSR);
 				if (msr & UART_MSR_ANY_DELTA)
-					mxser_check_modem_status(info, msr);
+					mxser_check_modem_status(port, msr);
 
 				/* following add by Victor Yu. 09-13-2002 */
-				if (info->IsMoxaMustChipFlag) {
+				if (port->board->chip_flag) {
 					if (iir == 0x02 && (status &
 								UART_LSR_THRE))
-						mxser_transmit_chars(info);
+						mxser_transmit_chars(port);
 				} else {
 					/* above add by Victor Yu. 09-13-2002 */
 
 					if (status & UART_LSR_THRE)
-						mxser_transmit_chars(info);
+						mxser_transmit_chars(port);
 				}
-				spin_unlock(&info->slock);
+				spin_unlock(&port->slock);
 			} while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
 		}
 		if (pass_counter++ > MXSER_ISR_PASS_LIMIT)
@@ -2046,9 +1993,9 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	return handled;
 }
 
-static void mxser_receive_chars(struct mxser_struct *info, int *status)
+static void mxser_receive_chars(struct mxser_port *port, int *status)
 {
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = port->tty;
 	unsigned char ch, gdl;
 	int ignored = 0;
 	int cnt = 0;
@@ -2056,42 +2003,42 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status)
 	int max = 256;
 	unsigned long flags;
 
-	spin_lock_irqsave(&info->slock, flags);
+	spin_lock_irqsave(&port->slock, flags);
 
 	recv_room = tty->receive_room;
-	if ((recv_room == 0) && (!info->ldisc_stop_rx)) {
+	if ((recv_room == 0) && (!port->ldisc_stop_rx)) {
 		/* mxser_throttle(tty); */
 		mxser_stoprx(tty);
 		/* return; */
 	}
 
 	/* following add by Victor Yu. 09-02-2002 */
-	if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) {
+	if (port->board->chip_flag != MOXA_OTHER_UART) {
 
 		if (*status & UART_LSR_SPECIAL)
 			goto intr_old;
 		/* following add by Victor Yu. 02-11-2004 */
-		if (info->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID &&
+		if (port->board->chip_flag == MOXA_MUST_MU860_HWID &&
 				(*status & MOXA_MUST_LSR_RERR))
 			goto intr_old;
 		/* above add by Victor Yu. 02-14-2004 */
 		if (*status & MOXA_MUST_LSR_RERR)
 			goto intr_old;
 
-		gdl = inb(info->base + MOXA_MUST_GDL_REGISTER);
+		gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER);
 
 		/* add by Victor Yu. 02-11-2004 */
-		if (info->IsMoxaMustChipFlag == MOXA_MUST_MU150_HWID)
+		if (port->board->chip_flag == MOXA_MUST_MU150_HWID)
 			gdl &= MOXA_MUST_GDL_MASK;
 		if (gdl >= recv_room) {
-			if (!info->ldisc_stop_rx) {
+			if (!port->ldisc_stop_rx) {
 				/* mxser_throttle(tty); */
 				mxser_stoprx(tty);
 			}
 			/* return; */
 		}
 		while (gdl--) {
-			ch = inb(info->base + UART_RX);
+			ch = inb(port->ioaddr + UART_RX);
 			tty_insert_flip_char(tty, ch, 0);
 			cnt++;
 		}
@@ -2104,14 +2051,14 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status)
 		if (max-- < 0)
 			break;
 
-		ch = inb(info->base + UART_RX);
+		ch = inb(port->ioaddr + UART_RX);
 		/* following add by Victor Yu. 09-02-2002 */
-		if (info->IsMoxaMustChipFlag && (*status & UART_LSR_OE)
+		if (port->board->chip_flag && (*status & UART_LSR_OE)
 				/*&& !(*status&UART_LSR_DR) */)
-			outb(0x23, info->base + UART_FCR);
-		*status &= info->read_status_mask;
+			outb(0x23, port->ioaddr + UART_FCR);
+		*status &= port->read_status_mask;
 		/* above add by Victor Yu. 09-02-2002 */
-		if (*status & info->ignore_status_mask) {
+		if (*status & port->ignore_status_mask) {
 			if (++ignored > 100)
 				break;
 		} else {
@@ -2120,22 +2067,22 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status)
 				if (*status & UART_LSR_BI) {
 					flag = TTY_BREAK;
 /* added by casper 1/11/2000 */
-					info->icount.brk++;
+					port->icount.brk++;
 
-					if (info->flags & ASYNC_SAK)
+					if (port->flags & ASYNC_SAK)
 						do_SAK(tty);
 				} else if (*status & UART_LSR_PE) {
 					flag = TTY_PARITY;
 /* added by casper 1/11/2000 */
-					info->icount.parity++;
+					port->icount.parity++;
 				} else if (*status & UART_LSR_FE) {
 					flag = TTY_FRAME;
 /* added by casper 1/11/2000 */
-					info->icount.frame++;
+					port->icount.frame++;
 				} else if (*status & UART_LSR_OE) {
 					flag = TTY_OVERRUN;
 /* added by casper 1/11/2000 */
-					info->icount.overrun++;
+					port->icount.overrun++;
 				} else
 					flags = TTY_BREAK;
 			} else
@@ -2143,7 +2090,7 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status)
 			tty_insert_flip_char(tty, ch, flag);
 			cnt++;
 			if (cnt >= recv_room) {
-				if (!info->ldisc_stop_rx) {
+				if (!port->ldisc_stop_rx) {
 					/* mxser_throttle(tty); */
 					mxser_stoprx(tty);
 				}
@@ -2153,142 +2100,144 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status)
 		}
 
 		/* following add by Victor Yu. 09-02-2002 */
-		if (info->IsMoxaMustChipFlag)
+		if (port->board->chip_flag)
 			break;
 
 		/* mask by Victor Yu. 09-02-2002
-		 *status = inb(info->base + UART_LSR) & info->read_status_mask;
+		 *status = inb(port->ioaddr + UART_LSR) & port->read_status_mask;
 		 */
 		/* following add by Victor Yu. 09-02-2002 */
-		*status = inb(info->base + UART_LSR);
+		*status = inb(port->ioaddr + UART_LSR);
 		/* above add by Victor Yu. 09-02-2002 */
 	} while (*status & UART_LSR_DR);
 
 end_intr:		/* add by Victor Yu. 09-02-2002 */
-	mxvar_log.rxcnt[info->port] += cnt;
-	info->mon_data.rxcnt += cnt;
-	info->mon_data.up_rxcnt += cnt;
-	spin_unlock_irqrestore(&info->slock, flags);
+	mxvar_log.rxcnt[port->tty->index] += cnt;
+	port->mon_data.rxcnt += cnt;
+	port->mon_data.up_rxcnt += cnt;
+	spin_unlock_irqrestore(&port->slock, flags);
 
 	tty_flip_buffer_push(tty);
 }
 
-static void mxser_transmit_chars(struct mxser_struct *info)
+static void mxser_transmit_chars(struct mxser_port *port)
 {
 	int count, cnt;
 	unsigned long flags;
 
-	spin_lock_irqsave(&info->slock, flags);
+	spin_lock_irqsave(&port->slock, flags);
 
-	if (info->x_char) {
-		outb(info->x_char, info->base + UART_TX);
-		info->x_char = 0;
-		mxvar_log.txcnt[info->port]++;
-		info->mon_data.txcnt++;
-		info->mon_data.up_txcnt++;
+	if (port->x_char) {
+		outb(port->x_char, port->ioaddr + UART_TX);
+		port->x_char = 0;
+		mxvar_log.txcnt[port->tty->index]++;
+		port->mon_data.txcnt++;
+		port->mon_data.up_txcnt++;
 
 /* added by casper 1/11/2000 */
-		info->icount.tx++;
+		port->icount.tx++;
 		goto unlock;
 	}
 
-	if (info->xmit_buf == 0)
+	if (port->xmit_buf == 0)
 		goto unlock;
 
-	if (info->xmit_cnt == 0) {
-		if (info->xmit_cnt < WAKEUP_CHARS) { /* XXX what's this for?? */
-			set_bit(MXSER_EVENT_TXLOW, &info->event);
-			schedule_work(&info->tqueue);
+	if (port->xmit_cnt == 0) {
+		if (port->xmit_cnt < WAKEUP_CHARS) { /* XXX what's this for?? */
+			set_bit(MXSER_EVENT_TXLOW, &port->event);
+			schedule_work(&port->tqueue);
 		}
 		goto unlock;
 	}
-	if (info->tty->stopped || (info->tty->hw_stopped &&
-			(info->type != PORT_16550A) &&
-			(!info->IsMoxaMustChipFlag))) {
-		info->IER &= ~UART_IER_THRI;
-		outb(info->IER, info->base + UART_IER);
+	if (port->tty->stopped || (port->tty->hw_stopped &&
+			(port->type != PORT_16550A) &&
+			(!port->board->chip_flag))) {
+		port->IER &= ~UART_IER_THRI;
+		outb(port->IER, port->ioaddr + UART_IER);
 		goto unlock;
 	}
 
-	cnt = info->xmit_cnt;
-	count = info->xmit_fifo_size;
+	cnt = port->xmit_cnt;
+	count = port->xmit_fifo_size;
 	do {
-		outb(info->xmit_buf[info->xmit_tail++],
-			info->base + UART_TX);
-		info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE - 1);
-		if (--info->xmit_cnt <= 0)
+		outb(port->xmit_buf[port->xmit_tail++],
+			port->ioaddr + UART_TX);
+		port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1);
+		if (--port->xmit_cnt <= 0)
 			break;
 	} while (--count > 0);
-	mxvar_log.txcnt[info->port] += (cnt - info->xmit_cnt);
+	mxvar_log.txcnt[port->tty->index] += (cnt - port->xmit_cnt);
 
 /* added by James 03-12-2004. */
-	info->mon_data.txcnt += (cnt - info->xmit_cnt);
-	info->mon_data.up_txcnt += (cnt - info->xmit_cnt);
+	port->mon_data.txcnt += (cnt - port->xmit_cnt);
+	port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
 
 /* added by casper 1/11/2000 */
-	info->icount.tx += (cnt - info->xmit_cnt);
+	port->icount.tx += (cnt - port->xmit_cnt);
 
-	if (info->xmit_cnt < WAKEUP_CHARS) {
-		set_bit(MXSER_EVENT_TXLOW, &info->event);
-		schedule_work(&info->tqueue);
+	if (port->xmit_cnt < WAKEUP_CHARS) {
+		set_bit(MXSER_EVENT_TXLOW, &port->event);
+		schedule_work(&port->tqueue);
 	}
-	if (info->xmit_cnt <= 0) {
-		info->IER &= ~UART_IER_THRI;
-		outb(info->IER, info->base + UART_IER);
+	if (port->xmit_cnt <= 0) {
+		port->IER &= ~UART_IER_THRI;
+		outb(port->IER, port->ioaddr + UART_IER);
 	}
 unlock:
-	spin_unlock_irqrestore(&info->slock, flags);
+	spin_unlock_irqrestore(&port->slock, flags);
 }
 
-static void mxser_check_modem_status(struct mxser_struct *info, int status)
+static void mxser_check_modem_status(struct mxser_port *port, int status)
 {
 	/* update input line counters */
 	if (status & UART_MSR_TERI)
-		info->icount.rng++;
+		port->icount.rng++;
 	if (status & UART_MSR_DDSR)
-		info->icount.dsr++;
+		port->icount.dsr++;
 	if (status & UART_MSR_DDCD)
-		info->icount.dcd++;
+		port->icount.dcd++;
 	if (status & UART_MSR_DCTS)
-		info->icount.cts++;
-	info->mon_data.modem_status = status;
-	wake_up_interruptible(&info->delta_msr_wait);
+		port->icount.cts++;
+	port->mon_data.modem_status = status;
+	wake_up_interruptible(&port->delta_msr_wait);
 
-	if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
+	if ((port->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
 		if (status & UART_MSR_DCD)
-			wake_up_interruptible(&info->open_wait);
-		schedule_work(&info->tqueue);
+			wake_up_interruptible(&port->open_wait);
+		schedule_work(&port->tqueue);
 	}
 
-	if (info->flags & ASYNC_CTS_FLOW) {
-		if (info->tty->hw_stopped) {
+	if (port->flags & ASYNC_CTS_FLOW) {
+		if (port->tty->hw_stopped) {
 			if (status & UART_MSR_CTS) {
-				info->tty->hw_stopped = 0;
-
-				if ((info->type != PORT_16550A) &&
-						(!info->IsMoxaMustChipFlag)) {
-					outb(info->IER & ~UART_IER_THRI,
-							info->base + UART_IER);
-					info->IER |= UART_IER_THRI;
-					outb(info->IER, info->base + UART_IER);
+				port->tty->hw_stopped = 0;
+
+				if ((port->type != PORT_16550A) &&
+						(!port->board->chip_flag)) {
+					outb(port->IER & ~UART_IER_THRI,
+						port->ioaddr + UART_IER);
+					port->IER |= UART_IER_THRI;
+					outb(port->IER, port->ioaddr +
+							UART_IER);
 				}
-				set_bit(MXSER_EVENT_TXLOW, &info->event);
-				schedule_work(&info->tqueue);
+				set_bit(MXSER_EVENT_TXLOW, &port->event);
+				schedule_work(&port->tqueue);
 			}
 		} else {
 			if (!(status & UART_MSR_CTS)) {
-				info->tty->hw_stopped = 1;
-				if (info->type != PORT_16550A &&
-						!info->IsMoxaMustChipFlag) {
-					info->IER &= ~UART_IER_THRI;
-					outb(info->IER, info->base + UART_IER);
+				port->tty->hw_stopped = 1;
+				if (port->type != PORT_16550A &&
+						!port->board->chip_flag) {
+					port->IER &= ~UART_IER_THRI;
+					outb(port->IER, port->ioaddr +
+							UART_IER);
 				}
 			}
 		}
 	}
 }
 
-static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_struct *info)
+static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_port *port)
 {
 	DECLARE_WAITQUEUE(wait, current);
 	int retval;
@@ -2300,7 +2249,7 @@ static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, stru
 	 * then make the check up front and then exit.
 	 */
 	if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= ASYNC_NORMAL_ACTIVE;
+		port->flags |= ASYNC_NORMAL_ACTIVE;
 		return 0;
 	}
 
@@ -2310,34 +2259,34 @@ static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, stru
 	/*
 	 * Block waiting for the carrier detect and the line to become
 	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
+	 * this loop, port->count is dropped by one, so that
 	 * mxser_close() knows when to free things.  We restore it upon
 	 * exit, either normal or abnormal.
 	 */
 	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
+	add_wait_queue(&port->open_wait, &wait);
 
-	spin_lock_irqsave(&info->slock, flags);
+	spin_lock_irqsave(&port->slock, flags);
 	if (!tty_hung_up_p(filp))
-		info->count--;
-	spin_unlock_irqrestore(&info->slock, flags);
-	info->blocked_open++;
+		port->count--;
+	spin_unlock_irqrestore(&port->slock, flags);
+	port->blocked_open++;
 	while (1) {
-		spin_lock_irqsave(&info->slock, flags);
-		outb(inb(info->base + UART_MCR) |
-			UART_MCR_DTR | UART_MCR_RTS, info->base + UART_MCR);
-		spin_unlock_irqrestore(&info->slock, flags);
+		spin_lock_irqsave(&port->slock, flags);
+		outb(inb(port->ioaddr + UART_MCR) |
+			UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR);
+		spin_unlock_irqrestore(&port->slock, flags);
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) {
-			if (info->flags & ASYNC_HUP_NOTIFY)
+		if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
+			if (port->flags & ASYNC_HUP_NOTIFY)
 				retval = -EAGAIN;
 			else
 				retval = -ERESTARTSYS;
 			break;
 		}
-		if (!(info->flags & ASYNC_CLOSING) &&
+		if (!(port->flags & ASYNC_CLOSING) &&
 				(do_clocal ||
-				(inb(info->base + UART_MSR) & UART_MSR_DCD)))
+				(inb(port->ioaddr + UART_MSR) & UART_MSR_DCD)))
 			break;
 		if (signal_pending(current)) {
 			retval = -ERESTARTSYS;
@@ -2346,17 +2295,17 @@ static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, stru
 		schedule();
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->open_wait, &wait);
+	remove_wait_queue(&port->open_wait, &wait);
 	if (!tty_hung_up_p(filp))
-		info->count++;
-	info->blocked_open--;
+		port->count++;
+	port->blocked_open--;
 	if (retval)
 		return retval;
-	info->flags |= ASYNC_NORMAL_ACTIVE;
+	port->flags |= ASYNC_NORMAL_ACTIVE;
 	return 0;
 }
 
-static int mxser_startup(struct mxser_struct *info)
+static int mxser_startup(struct mxser_port *info)
 {
 	unsigned long page;
 	unsigned long flags;
@@ -2373,7 +2322,7 @@ static int mxser_startup(struct mxser_struct *info)
 		return 0;
 	}
 
-	if (!info->base || !info->type) {
+	if (!info->ioaddr || !info->type) {
 		if (info->tty)
 			set_bit(TTY_IO_ERROR, &info->tty->flags);
 		free_page(page);
@@ -2389,20 +2338,20 @@ static int mxser_startup(struct mxser_struct *info)
 	 * Clear the FIFO buffers and disable them
 	 * (they will be reenabled in mxser_change_speed())
 	 */
-	if (info->IsMoxaMustChipFlag)
+	if (info->board->chip_flag)
 		outb((UART_FCR_CLEAR_RCVR |
 			UART_FCR_CLEAR_XMIT |
-			MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR);
+			MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
 	else
 		outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
-			info->base + UART_FCR);
+			info->ioaddr + UART_FCR);
 
 	/*
 	 * At this point there's no way the LSR could still be 0xFF;
 	 * if it is, then bail out, because there's likely no UART
 	 * here.
 	 */
-	if (inb(info->base + UART_LSR) == 0xff) {
+	if (inb(info->ioaddr + UART_LSR) == 0xff) {
 		spin_unlock_irqrestore(&info->slock, flags);
 		if (capable(CAP_SYS_ADMIN)) {
 			if (info->tty)
@@ -2415,17 +2364,17 @@ static int mxser_startup(struct mxser_struct *info)
 	/*
 	 * Clear the interrupt registers.
 	 */
-	(void) inb(info->base + UART_LSR);
-	(void) inb(info->base + UART_RX);
-	(void) inb(info->base + UART_IIR);
-	(void) inb(info->base + UART_MSR);
+	(void) inb(info->ioaddr + UART_LSR);
+	(void) inb(info->ioaddr + UART_RX);
+	(void) inb(info->ioaddr + UART_IIR);
+	(void) inb(info->ioaddr + UART_MSR);
 
 	/*
 	 * Now, initialize the UART
 	 */
-	outb(UART_LCR_WLEN8, info->base + UART_LCR);	/* reset DLAB */
+	outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR);	/* reset DLAB */
 	info->MCR = UART_MCR_DTR | UART_MCR_RTS;
-	outb(info->MCR, info->base + UART_MCR);
+	outb(info->MCR, info->ioaddr + UART_MCR);
 
 	/*
 	 * Finally, enable interrupts
@@ -2434,18 +2383,18 @@ static int mxser_startup(struct mxser_struct *info)
 	/* info->IER = UART_IER_RLSI | UART_IER_RDI; */
 
 	/* following add by Victor Yu. 08-30-2002 */
-	if (info->IsMoxaMustChipFlag)
+	if (info->board->chip_flag)
 		info->IER |= MOXA_MUST_IER_EGDAI;
 	/* above add by Victor Yu. 08-30-2002 */
-	outb(info->IER, info->base + UART_IER);	/* enable interrupts */
+	outb(info->IER, info->ioaddr + UART_IER);	/* enable interrupts */
 
 	/*
 	 * And clear the interrupt registers again for luck.
 	 */
-	(void) inb(info->base + UART_LSR);
-	(void) inb(info->base + UART_RX);
-	(void) inb(info->base + UART_IIR);
-	(void) inb(info->base + UART_MSR);
+	(void) inb(info->ioaddr + UART_LSR);
+	(void) inb(info->ioaddr + UART_RX);
+	(void) inb(info->ioaddr + UART_IIR);
+	(void) inb(info->ioaddr + UART_MSR);
 
 	if (info->tty)
 		clear_bit(TTY_IO_ERROR, &info->tty->flags);
@@ -2465,7 +2414,7 @@ static int mxser_startup(struct mxser_struct *info)
  * This routine will shutdown a serial port; interrupts maybe disabled, and
  * DTR is dropped if the hangup on close termio flag is on.
  */
-static void mxser_shutdown(struct mxser_struct *info)
+static void mxser_shutdown(struct mxser_port *info)
 {
 	unsigned long flags;
 
@@ -2489,25 +2438,25 @@ static void mxser_shutdown(struct mxser_struct *info)
 	}
 
 	info->IER = 0;
-	outb(0x00, info->base + UART_IER);
+	outb(0x00, info->ioaddr + UART_IER);
 
 	if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
 		info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
-	outb(info->MCR, info->base + UART_MCR);
+	outb(info->MCR, info->ioaddr + UART_MCR);
 
 	/* clear Rx/Tx FIFO's */
 	/* following add by Victor Yu. 08-30-2002 */
-	if (info->IsMoxaMustChipFlag)
-		outb((UART_FCR_CLEAR_RCVR |
-			UART_FCR_CLEAR_XMIT |
-			MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR);
+	if (info->board->chip_flag)
+		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
+				MOXA_MUST_FCR_GDA_MODE_ENABLE,
+				info->ioaddr + UART_FCR);
 	else
 		/* above add by Victor Yu. 08-30-2002 */
-		outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
-			info->base + UART_FCR);
+		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+			info->ioaddr + UART_FCR);
 
 	/* read data port to reset things */
-	(void) inb(info->base + UART_RX);
+	(void) inb(info->ioaddr + UART_RX);
 
 	if (info->tty)
 		set_bit(TTY_IO_ERROR, &info->tty->flags);
@@ -2515,8 +2464,8 @@ static void mxser_shutdown(struct mxser_struct *info)
 	info->flags &= ~ASYNC_INITIALIZED;
 
 	/* following add by Victor Yu. 09-23-2002 */
-	if (info->IsMoxaMustChipFlag)
-		SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->base);
+	if (info->board->chip_flag)
+		SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
 	/* above add by Victor Yu. 09-23-2002 */
 
 	spin_unlock_irqrestore(&info->slock, flags);
@@ -2526,7 +2475,8 @@ static void mxser_shutdown(struct mxser_struct *info)
  * This routine is called to set the UART divisor registers to match
  * the specified baud rate for a serial port.
  */
-static int mxser_change_speed(struct mxser_struct *info, struct termios *old_termios)
+static int mxser_change_speed(struct mxser_port *info,
+		struct termios *old_termios)
 {
 	unsigned cflag, cval, fcr;
 	int ret = 0;
@@ -2537,13 +2487,13 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 	if (!info->tty || !info->tty->termios)
 		return ret;
 	cflag = info->tty->termios->c_cflag;
-	if (!(info->base))
+	if (!(info->ioaddr))
 		return ret;
 
 #ifndef B921600
 #define B921600 (B460800 +1)
 #endif
-	if (mxser_set_baud_method[info->port] == 0) {
+	if (mxser_set_baud_method[info->tty->index] == 0) {
 		baud = tty_get_baud_rate(info->tty);
 		mxser_set_baud(info, baud);
 	}
@@ -2576,7 +2526,7 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 		cval |= UART_LCR_SPAR;
 
 	if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
-		if (info->IsMoxaMustChipFlag) {
+		if (info->board->chip_flag) {
 			fcr = UART_FCR_ENABLE_FIFO;
 			fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
 			SET_MOXA_MUST_FIFO_VALUE(info);
@@ -2585,7 +2535,7 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 	} else {
 		fcr = UART_FCR_ENABLE_FIFO;
 		/* following add by Victor Yu. 08-30-2002 */
-		if (info->IsMoxaMustChipFlag) {
+		if (info->board->chip_flag) {
 			fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
 			SET_MOXA_MUST_FIFO_VALUE(info);
 		} else {
@@ -2613,9 +2563,9 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 	if (cflag & CRTSCTS) {
 		info->flags |= ASYNC_CTS_FLOW;
 		info->IER |= UART_IER_MSI;
-		if ((info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) {
+		if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
 			info->MCR |= UART_MCR_AFE;
-			/* status = mxser_get_msr(info->base, 0, info->port); */
+/*			status = mxser_get_msr(info->ioaddr, 0, info->port); */
 /*
 	save_flags(flags);
 	cli();
@@ -2624,19 +2574,21 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 */
 			/* mxser_check_modem_status(info, status); */
 		} else {
-			/* status = mxser_get_msr(info->base, 0, info->port); */
+/*			status = mxser_get_msr(info->ioaddr, 0, info->port); */
 			/* MX_LOCK(&info->slock); */
-			status = inb(info->base + UART_MSR);
+			status = inb(info->ioaddr + UART_MSR);
 			/* MX_UNLOCK(&info->slock); */
 			if (info->tty->hw_stopped) {
 				if (status & UART_MSR_CTS) {
 					info->tty->hw_stopped = 0;
 					if (info->type != PORT_16550A &&
-							!info->IsMoxaMustChipFlag) {
+							!info->board->chip_flag) {
 						outb(info->IER & ~UART_IER_THRI,
-							info->base + UART_IER);
+							info->ioaddr +
+							UART_IER);
 						info->IER |= UART_IER_THRI;
-						outb(info->IER, info->base + UART_IER);
+						outb(info->IER, info->ioaddr +
+								UART_IER);
 					}
 					set_bit(MXSER_EVENT_TXLOW, &info->event);
 					schedule_work(&info->tqueue);				}
@@ -2644,9 +2596,10 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 				if (!(status & UART_MSR_CTS)) {
 					info->tty->hw_stopped = 1;
 					if ((info->type != PORT_16550A) &&
-							(!info->IsMoxaMustChipFlag)) {
+							(!info->board->chip_flag)) {
 						info->IER &= ~UART_IER_THRI;
-						outb(info->IER, info->base + UART_IER);
+						outb(info->IER, info->ioaddr +
+								UART_IER);
 					}
 				}
 			}
@@ -2654,14 +2607,14 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 	} else {
 		info->flags &= ~ASYNC_CTS_FLOW;
 	}
-	outb(info->MCR, info->base + UART_MCR);
+	outb(info->MCR, info->ioaddr + UART_MCR);
 	if (cflag & CLOCAL) {
 		info->flags &= ~ASYNC_CHECK_CD;
 	} else {
 		info->flags |= ASYNC_CHECK_CD;
 		info->IER |= UART_IER_MSI;
 	}
-	outb(info->IER, info->base + UART_IER);
+	outb(info->IER, info->ioaddr + UART_IER);
 
 	/*
 	 * Set up parity check flag
@@ -2693,27 +2646,27 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 		}
 	}
 	/* following add by Victor Yu. 09-02-2002 */
-	if (info->IsMoxaMustChipFlag) {
+	if (info->board->chip_flag) {
 		spin_lock_irqsave(&info->slock, flags);
-		SET_MOXA_MUST_XON1_VALUE(info->base, START_CHAR(info->tty));
-		SET_MOXA_MUST_XOFF1_VALUE(info->base, STOP_CHAR(info->tty));
+		SET_MOXA_MUST_XON1_VALUE(info->ioaddr, START_CHAR(info->tty));
+		SET_MOXA_MUST_XOFF1_VALUE(info->ioaddr, STOP_CHAR(info->tty));
 		if (I_IXON(info->tty)) {
-			ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
+			ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
 		} else {
-			DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
+			DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
 		}
 		if (I_IXOFF(info->tty)) {
-			ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base);
+			ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
 		} else {
-			DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base);
+			DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
 		}
 		/*
 		   if ( I_IXANY(info->tty) ) {
 		   info->MCR |= MOXA_MUST_MCR_XON_ANY;
-		   ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base);
+		   ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->ioaddr);
 		   } else {
 		   info->MCR &= ~MOXA_MUST_MCR_XON_ANY;
-		   DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base);
+		   DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->ioaddr);
 		   }
 		 */
 		spin_unlock_irqrestore(&info->slock, flags);
@@ -2721,14 +2674,14 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 	/* above add by Victor Yu. 09-02-2002 */
 
 
-	outb(fcr, info->base + UART_FCR);	/* set fcr */
-	outb(cval, info->base + UART_LCR);
+	outb(fcr, info->ioaddr + UART_FCR);	/* set fcr */
+	outb(cval, info->ioaddr + UART_LCR);
 
 	return ret;
 }
 
 
-static int mxser_set_baud(struct mxser_struct *info, long newspd)
+static int mxser_set_baud(struct mxser_port *info, long newspd)
 {
 	int quot = 0;
 	unsigned char cval;
@@ -2738,10 +2691,10 @@ static int mxser_set_baud(struct mxser_struct *info, long newspd)
 	if (!info->tty || !info->tty->termios)
 		return ret;
 
-	if (!(info->base))
+	if (!(info->ioaddr))
 		return ret;
 
-	if (newspd > info->MaxCanSetBaudRate)
+	if (newspd > info->max_baud)
 		return 0;
 
 	info->realbaud = newspd;
@@ -2761,23 +2714,23 @@ static int mxser_set_baud(struct mxser_struct *info, long newspd)
 	if (quot) {
 		spin_lock_irqsave(&info->slock, flags);
 		info->MCR |= UART_MCR_DTR;
-		outb(info->MCR, info->base + UART_MCR);
+		outb(info->MCR, info->ioaddr + UART_MCR);
 		spin_unlock_irqrestore(&info->slock, flags);
 	} else {
 		spin_lock_irqsave(&info->slock, flags);
 		info->MCR &= ~UART_MCR_DTR;
-		outb(info->MCR, info->base + UART_MCR);
+		outb(info->MCR, info->ioaddr + UART_MCR);
 		spin_unlock_irqrestore(&info->slock, flags);
 		return ret;
 	}
 
-	cval = inb(info->base + UART_LCR);
+	cval = inb(info->ioaddr + UART_LCR);
 
-	outb(cval | UART_LCR_DLAB, info->base + UART_LCR);	/* set DLAB */
+	outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR);	/* set DLAB */
 
-	outb(quot & 0xff, info->base + UART_DLL);	/* LS of divisor */
-	outb(quot >> 8, info->base + UART_DLM);	/* MS of divisor */
-	outb(cval, info->base + UART_LCR);	/* reset DLAB */
+	outb(quot & 0xff, info->ioaddr + UART_DLL);	/* LS of divisor */
+	outb(quot >> 8, info->ioaddr + UART_DLM);	/* MS of divisor */
+	outb(cval, info->ioaddr + UART_LCR);	/* reset DLAB */
 
 
 	return ret;
@@ -2788,7 +2741,8 @@ static int mxser_set_baud(struct mxser_struct *info, long newspd)
  * friends of mxser_ioctl()
  * ------------------------------------------------------------
  */
-static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct __user *retinfo)
+static int mxser_get_serial_info(struct mxser_port *info,
+		struct serial_struct __user *retinfo)
 {
 	struct serial_struct tmp;
 
@@ -2796,9 +2750,9 @@ static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct
 		return -EFAULT;
 	memset(&tmp, 0, sizeof(tmp));
 	tmp.type = info->type;
-	tmp.line = info->port;
-	tmp.port = info->base;
-	tmp.irq = info->irq;
+	tmp.line = info->tty->index;
+	tmp.port = info->ioaddr;
+	tmp.irq = info->board->irq;
 	tmp.flags = info->flags;
 	tmp.baud_base = info->baud_base;
 	tmp.close_delay = info->close_delay;
@@ -2810,19 +2764,20 @@ static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct
 	return 0;
 }
 
-static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct __user *new_info)
+static int mxser_set_serial_info(struct mxser_port *info,
+		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
 	unsigned int flags;
 	int retval = 0;
 
-	if (!new_info || !info->base)
+	if (!new_info || !info->ioaddr)
 		return -EFAULT;
 	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
 		return -EFAULT;
 
-	if ((new_serial.irq != info->irq) ||
-			(new_serial.port != info->base) ||
+	if ((new_serial.irq != info->board->irq) ||
+			(new_serial.port != info->ioaddr) ||
 			(new_serial.custom_divisor != info->custom_divisor) ||
 			(new_serial.baud_base != info->baud_base))
 		return -EPERM;
@@ -2856,12 +2811,11 @@ static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct
 	process_txrx_fifo(info);
 
 	if (info->flags & ASYNC_INITIALIZED) {
-		if (flags != (info->flags & ASYNC_SPD_MASK)) {
+		if (flags != (info->flags & ASYNC_SPD_MASK))
 			mxser_change_speed(info, NULL);
-		}
-	} else {
+	} else
 		retval = mxser_startup(info);
-	}
+
 	return retval;
 }
 
@@ -2875,14 +2829,15 @@ static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct
  *	    transmit holding register is empty.  This functionality
  *	    allows an RS485 driver to be written in user space.
  */
-static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int __user *value)
+static int mxser_get_lsr_info(struct mxser_port *info,
+		unsigned int __user *value)
 {
 	unsigned char status;
 	unsigned int result;
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->slock, flags);
-	status = inb(info->base + UART_LSR);
+	status = inb(info->ioaddr + UART_LSR);
 	spin_unlock_irqrestore(&info->slock, flags);
 	result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
 	return put_user(result, value);
@@ -2891,27 +2846,27 @@ static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int __user *va
 /*
  * This routine sends a break character out the serial port.
  */
-static void mxser_send_break(struct mxser_struct *info, int duration)
+static void mxser_send_break(struct mxser_port *info, int duration)
 {
 	unsigned long flags;
 
-	if (!info->base)
+	if (!info->ioaddr)
 		return;
 	set_current_state(TASK_INTERRUPTIBLE);
 	spin_lock_irqsave(&info->slock, flags);
-	outb(inb(info->base + UART_LCR) | UART_LCR_SBC,
-		info->base + UART_LCR);
+	outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
+		info->ioaddr + UART_LCR);
 	spin_unlock_irqrestore(&info->slock, flags);
 	schedule_timeout(duration);
 	spin_lock_irqsave(&info->slock, flags);
-	outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC,
-		info->base + UART_LCR);
+	outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
+		info->ioaddr + UART_LCR);
 	spin_unlock_irqrestore(&info->slock, flags);
 }
 
 static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned char control, status;
 	unsigned long flags;
 
@@ -2924,7 +2879,7 @@ static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
 	control = info->MCR;
 
 	spin_lock_irqsave(&info->slock, flags);
-	status = inb(info->base + UART_MSR);
+	status = inb(info->ioaddr + UART_MSR);
 	if (status & UART_MSR_ANY_DELTA)
 		mxser_check_modem_status(info, status);
 	spin_unlock_irqrestore(&info->slock, flags);
@@ -2936,9 +2891,10 @@ static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
 		    ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
 }
 
-static int mxser_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear)
+static int mxser_tiocmset(struct tty_struct *tty, struct file *file,
+		unsigned int set, unsigned int clear)
 {
-	struct mxser_struct *info = tty->driver_data;
+	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
 
@@ -2959,7 +2915,7 @@ static int mxser_tiocmset(struct tty_struct *tty, struct file *file, unsigned in
 	if (clear & TIOCM_DTR)
 		info->MCR &= ~UART_MCR_DTR;
 
-	outb(info->MCR, info->base + UART_MCR);
+	outb(info->MCR, info->ioaddr + UART_MCR);
 	spin_unlock_irqrestore(&info->slock, flags);
 	return 0;
 }
@@ -2969,49 +2925,49 @@ static int mxser_read_register(int, unsigned short *);
 static int mxser_program_mode(int);
 static void mxser_normal_mode(int);
 
-static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf)
+static int mxser_get_ISA_conf(int cap, struct mxser_board *brd)
 {
 	int id, i, bits;
 	unsigned short regs[16], irq;
 	unsigned char scratch, scratch2;
 
-	hwconf->IsMoxaMustChipFlag = MOXA_OTHER_UART;
+	brd->chip_flag = MOXA_OTHER_UART;
 
 	id = mxser_read_register(cap, regs);
 	if (id == C168_ASIC_ID) {
-		hwconf->board_type = MXSER_BOARD_C168_ISA;
-		hwconf->ports = 8;
+		brd->board_type = MXSER_BOARD_C168_ISA;
+		brd->nports = 8;
 	} else if (id == C104_ASIC_ID) {
-		hwconf->board_type = MXSER_BOARD_C104_ISA;
-		hwconf->ports = 4;
+		brd->board_type = MXSER_BOARD_C104_ISA;
+		brd->nports = 4;
 	} else if (id == C102_ASIC_ID) {
-		hwconf->board_type = MXSER_BOARD_C102_ISA;
-		hwconf->ports = 2;
+		brd->board_type = MXSER_BOARD_C102_ISA;
+		brd->nports = 2;
 	} else if (id == CI132_ASIC_ID) {
-		hwconf->board_type = MXSER_BOARD_CI132;
-		hwconf->ports = 2;
+		brd->board_type = MXSER_BOARD_CI132;
+		brd->nports = 2;
 	} else if (id == CI134_ASIC_ID) {
-		hwconf->board_type = MXSER_BOARD_CI134;
-		hwconf->ports = 4;
+		brd->board_type = MXSER_BOARD_CI134;
+		brd->nports = 4;
 	} else if (id == CI104J_ASIC_ID) {
-		hwconf->board_type = MXSER_BOARD_CI104J;
-		hwconf->ports = 4;
+		brd->board_type = MXSER_BOARD_CI104J;
+		brd->nports = 4;
 	} else
 		return 0;
 
 	irq = 0;
-	if (hwconf->ports == 2) {
+	if (brd->nports == 2) {
 		irq = regs[9] & 0xF000;
 		irq = irq | (irq >> 4);
 		if (irq != (regs[9] & 0xFF00))
 			return MXSER_ERR_IRQ_CONFLIT;
-	} else if (hwconf->ports == 4) {
+	} else if (brd->nports == 4) {
 		irq = regs[9] & 0xF000;
 		irq = irq | (irq >> 4);
 		irq = irq | (irq >> 8);
 		if (irq != regs[9])
 			return MXSER_ERR_IRQ_CONFLIT;
-	} else if (hwconf->ports == 8) {
+	} else if (brd->nports == 8) {
 		irq = regs[9] & 0xF000;
 		irq = irq | (irq >> 4);
 		irq = irq | (irq >> 8);
@@ -3021,23 +2977,23 @@ static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf)
 
 	if (!irq)
 		return MXSER_ERR_IRQ;
-	hwconf->irq = ((int)(irq & 0xF000) >> 12);
+	brd->irq = ((int)(irq & 0xF000) >> 12);
 	for (i = 0; i < 8; i++)
-		hwconf->ioaddr[i] = (int) regs[i + 1] & 0xFFF8;
+		brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
 	if ((regs[12] & 0x80) == 0)
 		return MXSER_ERR_VECTOR;
-	hwconf->vector = (int)regs[11];	/* interrupt vector */
+	brd->vector = (int)regs[11];	/* interrupt vector */
 	if (id == 1)
-		hwconf->vector_mask = 0x00FF;
+		brd->vector_mask = 0x00FF;
 	else
-		hwconf->vector_mask = 0x000F;
+		brd->vector_mask = 0x000F;
 	for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
 		if (regs[12] & bits) {
-			hwconf->baud_base[i] = 921600;
-			hwconf->MaxCanSetBaudRate[i] = 921600;	/* add by Victor Yu. 09-04-2002 */
+			brd->ports[i].baud_base = 921600;
+			brd->ports[i].max_baud = 921600;	/* add by Victor Yu. 09-04-2002 */
 		} else {
-			hwconf->baud_base[i] = 115200;
-			hwconf->MaxCanSetBaudRate[i] = 115200;	/* add by Victor Yu. 09-04-2002 */
+			brd->ports[i].baud_base = 115200;
+			brd->ports[i].max_baud = 115200;	/* add by Victor Yu. 09-04-2002 */
 		}
 	}
 	scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
@@ -3048,16 +3004,16 @@ static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf)
 	scratch = inb(cap + UART_IIR);
 
 	if (scratch & 0xC0)
-		hwconf->uart_type = PORT_16550A;
+		brd->uart_type = PORT_16550A;
 	else
-		hwconf->uart_type = PORT_16450;
+		brd->uart_type = PORT_16450;
 	if (id == 1)
-		hwconf->ports = 8;
+		brd->nports = 8;
 	else
-		hwconf->ports = 4;
-	request_region(hwconf->ioaddr[0], 8 * hwconf->ports, "mxser(IO)");
-	request_region(hwconf->vector, 1, "mxser(vector)");
-	return hwconf->ports;
+		brd->nports = 4;
+	request_region(brd->ports[0].ioaddr, 8 * brd->nports, "mxser(IO)");
+	request_region(brd->vector, 1, "mxser(vector)");
+	return brd->nports;
 }
 
 #define CHIP_SK 	0x01	/* Serial Data Clock  in Eprom */