tpm: Issue a TPM2_Shutdown for TPM2 devices.

If a TPM2 loses power without a TPM2_Shutdown command being issued (a
"disorderly reboot"), it may lose some state that has yet to be
persisted to NVRam, and will increment the DA counter. After the DA
counter gets sufficiently large, the TPM will lock the user out.

NOTE: This only changes behavior on TPM2 devices. Since TPM1 uses sysfs,
and sysfs relies on implicit locking on chip->ops, it is not safe to
allow this code to run in TPM1, or to add sysfs support to TPM2, until
that locking is made explicit.

Signed-off-by: Josh Zimmerman <joshz@google.com>
Cc: stable@vger.kernel.org
Fixes: 74d6b3ceaa17 ("tpm: fix suspend/resume paths for TPM 2.0")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

1 files changed, 34 insertions, 0 deletions

diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
index 322b8a51ffc6..67ec9d3d04f5 100644
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -143,6 +143,39 @@ static void tpm_devs_release(struct device *dev)
 }
 
 /**
+ * tpm_class_shutdown() - prepare the TPM device for loss of power.
+ * @dev: device to which the chip is associated.
+ *
+ * Issues a TPM2_Shutdown command prior to loss of power, as required by the
+ * TPM 2.0 spec.
+ * Then, calls bus- and device- specific shutdown code.
+ *
+ * XXX: This codepath relies on the fact that sysfs is not enabled for
+ * TPM2: sysfs uses an implicit lock on chip->ops, so this could race if TPM2
+ * has sysfs support enabled before TPM sysfs's implicit locking is fixed.
+ */
+static int tpm_class_shutdown(struct device *dev)
+{
+	struct tpm_chip *chip = container_of(dev, struct tpm_chip, dev);
+
+	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+		down_write(&chip->ops_sem);
+		tpm2_shutdown(chip, TPM2_SU_CLEAR);
+		chip->ops = NULL;
+		up_write(&chip->ops_sem);
+	}
+	/* Allow bus- and device-specific code to run. Note: since chip->ops
+	 * is NULL, more-specific shutdown code will not be able to issue TPM
+	 * commands.
+	 */
+	if (dev->bus && dev->bus->shutdown)
+		dev->bus->shutdown(dev);
+	else if (dev->driver && dev->driver->shutdown)
+		dev->driver->shutdown(dev);
+	return 0;
+}
+
+/**
  * tpm_chip_alloc() - allocate a new struct tpm_chip instance
  * @pdev: device to which the chip is associated
  *        At this point pdev mst be initialized, but does not have to
@@ -181,6 +214,7 @@ struct tpm_chip *tpm_chip_alloc(struct device *pdev,
 	device_initialize(&chip->devs);
 
 	chip->dev.class = tpm_class;
+	chip->dev.class->shutdown = tpm_class_shutdown;
 	chip->dev.release = tpm_dev_release;
 	chip->dev.parent = pdev;
 	chip->dev.groups = chip->groups;