Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This is all driver updates, the majority of which is a bunch of new
  Qualcomm clk drivers that dominate the diffstat because we add support
  for six SoCs from that particular vendor.

  The other big change is the removal of various clk drivers that are no
  longer used now that the kernel is dropping support for those SoCs.

  Beyond that there's the usual non-critical fixes for existing drivers
  and a good number of patches from Lee Jones that cleanup a bunch of
  W=1 enabled builds.

  Removed Drivers:
   - Remove efm32 clk driver
   - Remove tango4 clk driver
   - Remove zte zx clk driver
   - Remove sirf prima2/atlast clk drivers
   - Remove u300 clk driver

  New Drivers:
   - PLL support on MStar/SigmaStar ARMv7 SoCs
   - CPU clks for Qualcomm SDX55
   - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
   - GCC clks for Qualcomm SM8350
   - GPU clks for Qualcomm SDM660/SDM630

  Updates:
   - Video clk fixups on Qualcomm SM8250
   - Improvements for multimedia clks on Qualcomm MSM8998
   - Fix many warnings with W=1 enabled builds under drivers/clk/
   - Support crystal load capacitance for Versaclock VC5
   - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
     glitches at boot
   - Convert Xilinx VCU clk driver to a proper clk provider driver
   - Expose Xilinx ZynqMP clk driver to more platforms
   - Amlogic pll driver fixup
   - Amlogic meson8b clock controller dt support clean up
   - Remove mipi clk from the Amlogic axg clock controller
   - New Rockchip rk3368 clock ids related to camera input
   - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
     reparenting
   - A series from Liu Ying that adds some SCU clocks support for
     i.MX8qxp DC0/MIPI-LVDS subsystems
   - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
     and clkout1/2 support for i.MX8MM/MN
   - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
   - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
   - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
     (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
     (SYS-DMAC) clocks on Renesas R-Car V3U
   - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
   - Allwinner H616 SoC clk support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: qoriq: use macros to generate pll_mask
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: mstar: MStar/SigmaStar MPLL driver
  ...

9 files changed, 28 insertions, 28 deletions

diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
index 0fad1009f315..428a6f4b9ebc 100644
--- a/drivers/clk/at91/at91rm9200.c
+++ b/drivers/clk/at91/at91rm9200.c
@@ -215,5 +215,4 @@ err_free:
  * deferring properly. Once this is fixed, this can be switched to a platform
  * driver.
  */
-CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc",
-		      at91rm9200_pmc_setup);
+CLK_OF_DECLARE(at91rm9200_pmc, "atmel,at91rm9200-pmc", at91rm9200_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
index ceb5495f723a..b29843bea278 100644
--- a/drivers/clk/at91/at91sam9260.c
+++ b/drivers/clk/at91/at91sam9260.c
@@ -491,26 +491,26 @@ static void __init at91sam9260_pmc_setup(struct device_node *np)
 {
 	at91sam926x_pmc_setup(np, &at91sam9260_data);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9260_pmc, "atmel,at91sam9260-pmc",
-		      at91sam9260_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9260_pmc, "atmel,at91sam9260-pmc", at91sam9260_pmc_setup);
 
 static void __init at91sam9261_pmc_setup(struct device_node *np)
 {
 	at91sam926x_pmc_setup(np, &at91sam9261_data);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9261_pmc, "atmel,at91sam9261-pmc",
-		      at91sam9261_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9261_pmc, "atmel,at91sam9261-pmc", at91sam9261_pmc_setup);
 
 static void __init at91sam9263_pmc_setup(struct device_node *np)
 {
 	at91sam926x_pmc_setup(np, &at91sam9263_data);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9263_pmc, "atmel,at91sam9263-pmc",
-		      at91sam9263_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9263_pmc, "atmel,at91sam9263-pmc", at91sam9263_pmc_setup);
 
 static void __init at91sam9g20_pmc_setup(struct device_node *np)
 {
 	at91sam926x_pmc_setup(np, &at91sam9g20_data);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9g20_pmc, "atmel,at91sam9g20-pmc",
-		      at91sam9g20_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9g20_pmc, "atmel,at91sam9g20-pmc", at91sam9g20_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
index 0214333dedd3..15da0dfe3ef2 100644
--- a/drivers/clk/at91/at91sam9g45.c
+++ b/drivers/clk/at91/at91sam9g45.c
@@ -228,5 +228,4 @@ err_free:
  * The TCB is used as the clocksource so its clock is needed early. This means
  * this can't be a platform driver.
  */
-CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc",
-		      at91sam9g45_pmc_setup);
+CLK_OF_DECLARE(at91sam9g45_pmc, "atmel,at91sam9g45-pmc", at91sam9g45_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
index f9db5316a7f1..7fe435f4b46b 100644
--- a/drivers/clk/at91/at91sam9n12.c
+++ b/drivers/clk/at91/at91sam9n12.c
@@ -255,5 +255,4 @@ err_free:
  * The TCB is used as the clocksource so its clock is needed early. This means
  * this can't be a platform driver.
  */
-CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc",
-		      at91sam9n12_pmc_setup);
+CLK_OF_DECLARE(at91sam9n12_pmc, "atmel,at91sam9n12-pmc", at91sam9n12_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
index 66736e03cfef..ecbabf5162bd 100644
--- a/drivers/clk/at91/at91sam9rl.c
+++ b/drivers/clk/at91/at91sam9rl.c
@@ -186,4 +186,5 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
 err_free:
 	kfree(at91sam9rl_pmc);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
index 79b9d3667228..5cce48c64ea2 100644
--- a/drivers/clk/at91/at91sam9x5.c
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -302,33 +302,33 @@ static void __init at91sam9g15_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9g15_periphck, true);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9g15_pmc, "atmel,at91sam9g15-pmc",
-		      at91sam9g15_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", at91sam9g15_pmc_setup);
 
 static void __init at91sam9g25_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9g25_periphck, false);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9g25_pmc, "atmel,at91sam9g25-pmc",
-		      at91sam9g25_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", at91sam9g25_pmc_setup);
 
 static void __init at91sam9g35_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9g35_periphck, true);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9g35_pmc, "atmel,at91sam9g35-pmc",
-		      at91sam9g35_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", at91sam9g35_pmc_setup);
 
 static void __init at91sam9x25_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9x25_periphck, false);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9x25_pmc, "atmel,at91sam9x25-pmc",
-		      at91sam9x25_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", at91sam9x25_pmc_setup);
 
 static void __init at91sam9x35_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9x35_periphck, true);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9x35_pmc, "atmel,at91sam9x35-pmc",
-		      at91sam9x35_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", at91sam9x35_pmc_setup);
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index 9a5cbc7cd55a..3d1f78176c3e 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -372,4 +372,5 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
 err_free:
 	kfree(sama5d2_pmc);
 }
-CLK_OF_DECLARE_DRIVER(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
+
+CLK_OF_DECLARE(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
index 87009ee8effc..d376257807d2 100644
--- a/drivers/clk/at91/sama5d3.c
+++ b/drivers/clk/at91/sama5d3.c
@@ -255,4 +255,4 @@ err_free:
  * The TCB is used as the clocksource so its clock is needed early. This means
  * this can't be a platform driver.
  */
-CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
+CLK_OF_DECLARE(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
index 57fff790188b..5cbaac68da44 100644
--- a/drivers/clk/at91/sama5d4.c
+++ b/drivers/clk/at91/sama5d4.c
@@ -286,4 +286,5 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
 err_free:
 	kfree(sama5d4_pmc);
 }
-CLK_OF_DECLARE_DRIVER(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
+
+CLK_OF_DECLARE(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);