Merge tag 'sunxi-clocks-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Allwinner Clocks Additions for 3.18

The most important part of this serie is the addition of the phase API to
handle the MMC clocks in the Allwinner SoCs.

Apart from that, the A23 gained a new mbus driver, and there's a fix for a
incorrect divider table on the APB0 clock.

6 files changed, 485 insertions, 156 deletions

diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 6850cba35871..7ddc2b553846 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -5,6 +5,8 @@
 obj-y += clk-sunxi.o clk-factors.o
 obj-y += clk-a10-hosc.o
 obj-y += clk-a20-gmac.o
+obj-y += clk-mod0.o
+obj-y += clk-sun8i-mbus.o
 
 obj-$(CONFIG_MFD_SUN6I_PRCM) += \
 	clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \
diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
index 2057c8ac648f..f83ba097126c 100644
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -9,18 +9,18 @@
  */
 
 #include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_address.h>
 #include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/err.h>
 #include <linux/string.h>
 
-#include <linux/delay.h>
-
 #include "clk-factors.h"
 
 /*
- * DOC: basic adjustable factor-based clock that cannot gate
+ * DOC: basic adjustable factor-based clock
  *
  * Traits of this clock:
  * prepare - clk_prepare only ensures that parents are prepared
@@ -32,6 +32,8 @@
 
 #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
 
+#define FACTORS_MAX_PARENTS		5
+
 #define SETMASK(len, pos)		(((1U << (len)) - 1) << (pos))
 #define CLRMASK(len, pos)		(~(SETMASK(len, pos)))
 #define FACTOR_GET(bit, len, reg)	(((reg) & SETMASK(len, bit)) >> (bit))
@@ -147,9 +149,96 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-const struct clk_ops clk_factors_ops = {
+static const struct clk_ops clk_factors_ops = {
 	.determine_rate = clk_factors_determine_rate,
 	.recalc_rate = clk_factors_recalc_rate,
 	.round_rate = clk_factors_round_rate,
 	.set_rate = clk_factors_set_rate,
 };
+
+struct clk * __init sunxi_factors_register(struct device_node *node,
+					   const struct factors_data *data,
+					   spinlock_t *lock)
+{
+	struct clk *clk;
+	struct clk_factors *factors;
+	struct clk_gate *gate = NULL;
+	struct clk_mux *mux = NULL;
+	struct clk_hw *gate_hw = NULL;
+	struct clk_hw *mux_hw = NULL;
+	const char *clk_name = node->name;
+	const char *parents[FACTORS_MAX_PARENTS];
+	void __iomem *reg;
+	int i = 0;
+
+	reg = of_iomap(node, 0);
+
+	/* if we have a mux, we will have >1 parents */
+	while (i < FACTORS_MAX_PARENTS &&
+	       (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
+		i++;
+
+	/*
+	 * some factor clocks, such as pll5 and pll6, may have multiple
+	 * outputs, and have their name designated in factors_data
+	 */
+	if (data->name)
+		clk_name = data->name;
+	else
+		of_property_read_string(node, "clock-output-names", &clk_name);
+
+	factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
+	if (!factors)
+		return NULL;
+
+	/* set up factors properties */
+	factors->reg = reg;
+	factors->config = data->table;
+	factors->get_factors = data->getter;
+	factors->lock = lock;
+
+	/* Add a gate if this factor clock can be gated */
+	if (data->enable) {
+		gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+		if (!gate) {
+			kfree(factors);
+			return NULL;
+		}
+
+		/* set up gate properties */
+		gate->reg = reg;
+		gate->bit_idx = data->enable;
+		gate->lock = factors->lock;
+		gate_hw = &gate->hw;
+	}
+
+	/* Add a mux if this factor clock can be muxed */
+	if (data->mux) {
+		mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
+		if (!mux) {
+			kfree(factors);
+			kfree(gate);
+			return NULL;
+		}
+
+		/* set up gate properties */
+		mux->reg = reg;
+		mux->shift = data->mux;
+		mux->mask = SUNXI_FACTORS_MUX_MASK;
+		mux->lock = factors->lock;
+		mux_hw = &mux->hw;
+	}
+
+	clk = clk_register_composite(NULL, clk_name,
+			parents, i,
+			mux_hw, &clk_mux_ops,
+			&factors->hw, &clk_factors_ops,
+			gate_hw, &clk_gate_ops, 0);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		clk_register_clkdev(clk, clk_name, NULL);
+	}
+
+	return clk;
+}
diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
index d2d0efa39379..9913840018d3 100644
--- a/drivers/clk/sunxi/clk-factors.h
+++ b/drivers/clk/sunxi/clk-factors.h
@@ -3,9 +3,12 @@
 
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
+#include <linux/spinlock.h>
 
 #define SUNXI_FACTORS_NOT_APPLICABLE	(0)
 
+#define SUNXI_FACTORS_MUX_MASK 0x3
+
 struct clk_factors_config {
 	u8 nshift;
 	u8 nwidth;
@@ -18,6 +21,14 @@ struct clk_factors_config {
 	u8 n_start;
 };
 
+struct factors_data {
+	int enable;
+	int mux;
+	struct clk_factors_config *table;
+	void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
+	const char *name;
+};
+
 struct clk_factors {
 	struct clk_hw hw;
 	void __iomem *reg;
@@ -26,5 +37,8 @@ struct clk_factors {
 	spinlock_t *lock;
 };
 
-extern const struct clk_ops clk_factors_ops;
+struct clk * __init sunxi_factors_register(struct device_node *node,
+					   const struct factors_data *data,
+					   spinlock_t *lock);
+
 #endif
diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
new file mode 100644
index 000000000000..4a563850ee6e
--- /dev/null
+++ b/drivers/clk/sunxi/clk-mod0.c
@@ -0,0 +1,283 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+
+#include "clk-factors.h"
+
+/**
+ * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks
+ * MOD0 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sun4i_a10_get_mod0_factors(u32 *freq, u32 parent_rate,
+				       u8 *n, u8 *k, u8 *m, u8 *p)
+{
+	u8 div, calcm, calcp;
+
+	/* These clocks can only divide, so we will never be able to achieve
+	 * frequencies higher than the parent frequency */
+	if (*freq > parent_rate)
+		*freq = parent_rate;
+
+	div = DIV_ROUND_UP(parent_rate, *freq);
+
+	if (div < 16)
+		calcp = 0;
+	else if (div / 2 < 16)
+		calcp = 1;
+	else if (div / 4 < 16)
+		calcp = 2;
+	else
+		calcp = 3;
+
+	calcm = DIV_ROUND_UP(div, 1 << calcp);
+
+	*freq = (parent_rate >> calcp) / calcm;
+
+	/* we were called to round the frequency, we can now return */
+	if (n == NULL)
+		return;
+
+	*m = calcm - 1;
+	*p = calcp;
+}
+
+/* user manual says "n" but it's really "p" */
+static struct clk_factors_config sun4i_a10_mod0_config = {
+	.mshift = 0,
+	.mwidth = 4,
+	.pshift = 16,
+	.pwidth = 2,
+};
+
+static const struct factors_data sun4i_a10_mod0_data __initconst = {
+	.enable = 31,
+	.mux = 24,
+	.table = &sun4i_a10_mod0_config,
+	.getter = sun4i_a10_get_mod0_factors,
+};
+
+static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
+
+static void __init sun4i_a10_mod0_setup(struct device_node *node)
+{
+	sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock);
+}
+CLK_OF_DECLARE(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk", sun4i_a10_mod0_setup);
+
+static DEFINE_SPINLOCK(sun5i_a13_mbus_lock);
+
+static void __init sun5i_a13_mbus_setup(struct device_node *node)
+{
+	struct clk *mbus = sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun5i_a13_mbus_lock);
+
+	/* The MBUS clocks needs to be always enabled */
+	__clk_get(mbus);
+	clk_prepare_enable(mbus);
+}
+CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup);
+
+struct mmc_phase_data {
+	u8	offset;
+};
+
+struct mmc_phase {
+	struct clk_hw		hw;
+	void __iomem		*reg;
+	struct mmc_phase_data	*data;
+	spinlock_t		*lock;
+};
+
+#define to_mmc_phase(_hw) container_of(_hw, struct mmc_phase, hw)
+
+static int mmc_get_phase(struct clk_hw *hw)
+{
+	struct clk *mmc, *mmc_parent, *clk = hw->clk;
+	struct mmc_phase *phase = to_mmc_phase(hw);
+	unsigned int mmc_rate, mmc_parent_rate;
+	u16 step, mmc_div;
+	u32 value;
+	u8 delay;
+
+	value = readl(phase->reg);
+	delay = (value >> phase->data->offset) & 0x3;
+
+	if (!delay)
+		return 180;
+
+	/* Get the main MMC clock */
+	mmc = clk_get_parent(clk);
+	if (!mmc)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_rate = clk_get_rate(mmc);
+	if (!mmc_rate)
+		return -EINVAL;
+
+	/* Now, get the MMC parent (most likely some PLL) */
+	mmc_parent = clk_get_parent(mmc);
+	if (!mmc_parent)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_parent_rate = clk_get_rate(mmc_parent);
+	if (!mmc_parent_rate)
+		return -EINVAL;
+
+	/* Get MMC clock divider */
+	mmc_div = mmc_parent_rate / mmc_rate;
+
+	step = DIV_ROUND_CLOSEST(360, mmc_div);
+	return delay * step;
+}
+
+static int mmc_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct clk *mmc, *mmc_parent, *clk = hw->clk;
+	struct mmc_phase *phase = to_mmc_phase(hw);
+	unsigned int mmc_rate, mmc_parent_rate;
+	unsigned long flags;
+	u32 value;
+	u8 delay;
+
+	/* Get the main MMC clock */
+	mmc = clk_get_parent(clk);
+	if (!mmc)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_rate = clk_get_rate(mmc);
+	if (!mmc_rate)
+		return -EINVAL;
+
+	/* Now, get the MMC parent (most likely some PLL) */
+	mmc_parent = clk_get_parent(mmc);
+	if (!mmc_parent)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_parent_rate = clk_get_rate(mmc_parent);
+	if (!mmc_parent_rate)
+		return -EINVAL;
+
+	if (degrees != 180) {
+		u16 step, mmc_div;
+
+		/* Get MMC clock divider */
+		mmc_div = mmc_parent_rate / mmc_rate;
+
+		/*
+		 * We can only outphase the clocks by multiple of the
+		 * PLL's period.
+		 *
+		 * Since the MMC clock in only a divider, and the
+		 * formula to get the outphasing in degrees is deg =
+		 * 360 * delta / period
+		 *
+		 * If we simplify this formula, we can see that the
+		 * only thing that we're concerned about is the number
+		 * of period we want to outphase our clock from, and
+		 * the divider set by the MMC clock.
+		 */
+		step = DIV_ROUND_CLOSEST(360, mmc_div);
+		delay = DIV_ROUND_CLOSEST(degrees, step);
+	} else {
+		delay = 0;
+	}
+
+	spin_lock_irqsave(phase->lock, flags);
+	value = readl(phase->reg);
+	value &= ~GENMASK(phase->data->offset + 3, phase->data->offset);
+	value |= delay << phase->data->offset;
+	writel(value, phase->reg);
+	spin_unlock_irqrestore(phase->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops mmc_clk_ops = {
+	.get_phase	= mmc_get_phase,
+	.set_phase	= mmc_set_phase,
+};
+
+static void __init sun4i_a10_mmc_phase_setup(struct device_node *node,
+					     struct mmc_phase_data *data)
+{
+	const char *parent_names[1] = { of_clk_get_parent_name(node, 0) };
+	struct clk_init_data init = {
+		.num_parents	= 1,
+		.parent_names	= parent_names,
+		.ops		= &mmc_clk_ops,
+	};
+
+	struct mmc_phase *phase;
+	struct clk *clk;
+
+	phase = kmalloc(sizeof(*phase), GFP_KERNEL);
+	if (!phase)
+		return;
+
+	phase->hw.init = &init;
+
+	phase->reg = of_iomap(node, 0);
+	if (!phase->reg)
+		goto err_free;
+
+	phase->data = data;
+	phase->lock = &sun4i_a10_mod0_lock;
+
+	if (of_property_read_string(node, "clock-output-names", &init.name))
+		init.name = node->name;
+
+	clk = clk_register(NULL, &phase->hw);
+	if (IS_ERR(clk))
+		goto err_unmap;
+
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return;
+
+err_unmap:
+	iounmap(phase->reg);
+err_free:
+	kfree(phase);
+}
+
+
+static struct mmc_phase_data mmc_output_clk = {
+	.offset	= 8,
+};
+
+static struct mmc_phase_data mmc_sample_clk = {
+	.offset	= 20,
+};
+
+static void __init sun4i_a10_mmc_output_setup(struct device_node *node)
+{
+	sun4i_a10_mmc_phase_setup(node, &mmc_output_clk);
+}
+CLK_OF_DECLARE(sun4i_a10_mmc_output, "allwinner,sun4i-a10-mmc-output-clk", sun4i_a10_mmc_output_setup);
+
+static void __init sun4i_a10_mmc_sample_setup(struct device_node *node)
+{
+	sun4i_a10_mmc_phase_setup(node, &mmc_sample_clk);
+}
+CLK_OF_DECLARE(sun4i_a10_mmc_sample, "allwinner,sun4i-a10-mmc-sample-clk", sun4i_a10_mmc_sample_setup);
diff --git a/drivers/clk/sunxi/clk-sun8i-mbus.c b/drivers/clk/sunxi/clk-sun8i-mbus.c
new file mode 100644
index 000000000000..8e49b44cee41
--- /dev/null
+++ b/drivers/clk/sunxi/clk-sun8i-mbus.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+
+#include "clk-factors.h"
+
+/**
+ * sun8i_a23_get_mbus_factors() - calculates m factor for MBUS clocks
+ * MBUS rate is calculated as follows
+ * rate = parent_rate / (m + 1);
+ */
+
+static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate,
+				       u8 *n, u8 *k, u8 *m, u8 *p)
+{
+	u8 div;
+
+	/*
+	 * These clocks can only divide, so we will never be able to
+	 * achieve frequencies higher than the parent frequency
+	 */
+	if (*freq > parent_rate)
+		*freq = parent_rate;
+
+	div = DIV_ROUND_UP(parent_rate, *freq);
+
+	if (div > 8)
+		div = 8;
+
+	*freq = parent_rate / div;
+
+	/* we were called to round the frequency, we can now return */
+	if (m == NULL)
+		return;
+
+	*m = div - 1;
+}
+
+static struct clk_factors_config sun8i_a23_mbus_config = {
+	.mshift = 0,
+	.mwidth = 3,
+};
+
+static const struct factors_data sun8i_a23_mbus_data __initconst = {
+	.enable = 31,
+	.mux = 24,
+	.table = &sun8i_a23_mbus_config,
+	.getter = sun8i_a23_get_mbus_factors,
+};
+
+static DEFINE_SPINLOCK(sun8i_a23_mbus_lock);
+
+static void __init sun8i_a23_mbus_setup(struct device_node *node)
+{
+	struct clk *mbus = sunxi_factors_register(node, &sun8i_a23_mbus_data,
+						  &sun8i_a23_mbus_lock);
+
+	/* The MBUS clocks needs to be always enabled */
+	__clk_get(mbus);
+	clk_prepare_enable(mbus);
+}
+CLK_OF_DECLARE(sun8i_a23_mbus, "allwinner,sun8i-a23-mbus-clk", sun8i_a23_mbus_setup);
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index b654b7b1d137..d5dc951264ca 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/reset-controller.h>
+#include <linux/spinlock.h>
 
 #include "clk-factors.h"
 
@@ -319,46 +320,6 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate,
 
 
 
-/**
- * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks
- * MOD0 rate is calculated as follows
- * rate = (parent_rate >> p) / (m + 1);
- */
-
-static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate,
-				   u8 *n, u8 *k, u8 *m, u8 *p)
-{
-	u8 div, calcm, calcp;
-
-	/* These clocks can only divide, so we will never be able to achieve
-	 * frequencies higher than the parent frequency */
-	if (*freq > parent_rate)
-		*freq = parent_rate;
-
-	div = DIV_ROUND_UP(parent_rate, *freq);
-
-	if (div < 16)
-		calcp = 0;
-	else if (div / 2 < 16)
-		calcp = 1;
-	else if (div / 4 < 16)
-		calcp = 2;
-	else
-		calcp = 3;
-
-	calcm = DIV_ROUND_UP(div, 1 << calcp);
-
-	*freq = (parent_rate >> calcp) / calcm;
-
-	/* we were called to round the frequency, we can now return */
-	if (n == NULL)
-		return;
-
-	*m = calcm - 1;
-	*p = calcp;
-}
-
-
 
 /**
  * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B
@@ -440,16 +401,6 @@ EXPORT_SYMBOL(clk_sunxi_mmc_phase_control);
  * sunxi_factors_clk_setup() - Setup function for factor clocks
  */
 
-#define SUNXI_FACTORS_MUX_MASK 0x3
-
-struct factors_data {
-	int enable;
-	int mux;
-	struct clk_factors_config *table;
-	void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
-	const char *name;
-};
-
 static struct clk_factors_config sun4i_pll1_config = {
 	.nshift = 8,
 	.nwidth = 5,
@@ -504,14 +455,6 @@ static struct clk_factors_config sun4i_apb1_config = {
 };
 
 /* user manual says "n" but it's really "p" */
-static struct clk_factors_config sun4i_mod0_config = {
-	.mshift = 0,
-	.mwidth = 4,
-	.pshift = 16,
-	.pwidth = 2,
-};
-
-/* user manual says "n" but it's really "p" */
 static struct clk_factors_config sun7i_a20_out_config = {
 	.mshift = 8,
 	.mwidth = 5,
@@ -568,13 +511,6 @@ static const struct factors_data sun4i_apb1_data __initconst = {
 	.getter = sun4i_get_apb1_factors,
 };
 
-static const struct factors_data sun4i_mod0_data __initconst = {
-	.enable = 31,
-	.mux = 24,
-	.table = &sun4i_mod0_config,
-	.getter = sun4i_get_mod0_factors,
-};
-
 static const struct factors_data sun7i_a20_out_data __initconst = {
 	.enable = 31,
 	.mux = 24,
@@ -583,89 +519,9 @@ static const struct factors_data sun7i_a20_out_data __initconst = {
 };
 
 static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
-						const struct factors_data *data)
+						   const struct factors_data *data)
 {
-	struct clk *clk;
-	struct clk_factors *factors;
-	struct clk_gate *gate = NULL;
-	struct clk_mux *mux = NULL;
-	struct clk_hw *gate_hw = NULL;
-	struct clk_hw *mux_hw = NULL;
-	const char *clk_name = node->name;
-	const char *parents[SUNXI_MAX_PARENTS];
-	void __iomem *reg;
-	int i = 0;
-
-	reg = of_iomap(node, 0);
-
-	/* if we have a mux, we will have >1 parents */
-	while (i < SUNXI_MAX_PARENTS &&
-	       (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
-		i++;
-
-	/*
-	 * some factor clocks, such as pll5 and pll6, may have multiple
-	 * outputs, and have their name designated in factors_data
-	 */
-	if (data->name)
-		clk_name = data->name;
-	else
-		of_property_read_string(node, "clock-output-names", &clk_name);
-
-	factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
-	if (!factors)
-		return NULL;
-
-	/* Add a gate if this factor clock can be gated */
-	if (data->enable) {
-		gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
-		if (!gate) {
-			kfree(factors);
-			return NULL;
-		}
-
-		/* set up gate properties */
-		gate->reg = reg;
-		gate->bit_idx = data->enable;
-		gate->lock = &clk_lock;
-		gate_hw = &gate->hw;
-	}
-
-	/* Add a mux if this factor clock can be muxed */
-	if (data->mux) {
-		mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
-		if (!mux) {
-			kfree(factors);
-			kfree(gate);
-			return NULL;
-		}
-
-		/* set up gate properties */
-		mux->reg = reg;
-		mux->shift = data->mux;
-		mux->mask = SUNXI_FACTORS_MUX_MASK;
-		mux->lock = &clk_lock;
-		mux_hw = &mux->hw;
-	}
-
-	/* set up factors properties */
-	factors->reg = reg;
-	factors->config = data->table;
-	factors->get_factors = data->getter;
-	factors->lock = &clk_lock;
-
-	clk = clk_register_composite(NULL, clk_name,
-			parents, i,
-			mux_hw, &clk_mux_ops,
-			&factors->hw, &clk_factors_ops,
-			gate_hw, &clk_gate_ops, 0);
-
-	if (!IS_ERR(clk)) {
-		of_clk_add_provider(node, of_clk_src_simple_get, clk);
-		clk_register_clkdev(clk, clk_name, NULL);
-	}
-
-	return clk;
+	return sunxi_factors_register(node, data, &clk_lock);
 }
 
 
@@ -762,10 +618,19 @@ static const struct div_data sun4i_ahb_data __initconst = {
 	.width	= 2,
 };
 
+static const struct clk_div_table sun4i_apb0_table[] __initconst = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ } /* sentinel */
+};
+
 static const struct div_data sun4i_apb0_data __initconst = {
 	.shift	= 8,
 	.pow	= 1,
 	.width	= 2,
+	.table	= sun4i_apb0_table,
 };
 
 static const struct div_data sun6i_a31_apb2_div_data __initconst = {
@@ -1199,7 +1064,6 @@ static const struct of_device_id clk_factors_match[] __initconst = {
 	{.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,},
 	{.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,},
 	{.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,},
-	{.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,},
 	{.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
 	{}
 };
@@ -1311,7 +1175,6 @@ static void __init sun4i_a10_init_clocks(struct device_node *node)
 CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks);
 
 static const char *sun5i_critical_clocks[] __initdata = {
-	"mbus",
 	"pll5_ddr",
 	"ahb_sdram",
 };