Merge branch 'for-4.2/ti-clk-move' of https://github.com/t-kristo/linux-pm into clk-next

From Tero Kristo:
  "This pull request contains the TI clock driver set to move the
   clock implementations under clock driver. Some small portions of
   the clock driver code still remain under mach-omap2 after this,
   it should be decided whether this code is now obsolete and should
   be deleted or should someone try to fix it."

Slight merge conflicts with determine_rate prototype changes.

20 files changed, 2543 insertions, 19 deletions

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 105ffd0f5e79..9b93e6904359 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,16 +1,19 @@
 obj-y					+= clk.o autoidle.o clockdomain.o
 clk-common				= dpll.o composite.o divider.o gate.o \
-					  fixed-factor.o mux.o apll.o
-obj-$(CONFIG_SOC_AM33XX)		+= $(clk-common) clk-33xx.o
+					  fixed-factor.o mux.o apll.o \
+					  clkt_dpll.o clkt_iclk.o clkt_dflt.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clk-common) clk-33xx.o dpll3xxx.o
 obj-$(CONFIG_SOC_TI81XX)		+= $(clk-common) fapll.o clk-816x.o
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clk-common) interface.o clk-2xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clk-common) interface.o \
-					   clk-3xxx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(clk-common) clk-44xx.o
-obj-$(CONFIG_SOC_OMAP5)			+= $(clk-common) clk-54xx.o
+					   clk-3xxx.o dpll3xxx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clk-common) clk-44xx.o \
+					   dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(clk-common) clk-54xx.o \
+					   dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= $(clk-common) clk-7xx.o \
-					   clk-dra7-atl.o
-obj-$(CONFIG_SOC_AM43XX)		+= $(clk-common) clk-43xx.o
+					   clk-dra7-atl.o dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_AM43XX)		+= $(clk-common) dpll3xxx.o clk-43xx.o
 
 ifdef CONFIG_ATAGS
 obj-$(CONFIG_ARCH_OMAP3)                += clk-3xxx-legacy.o
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 49baf3831546..594b759f02ee 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -27,6 +27,8 @@
 #include <linux/clk/ti.h>
 #include <linux/delay.h>
 
+#include "clock.h"
+
 #define APLL_FORCE_LOCK 0x1
 #define APLL_AUTO_IDLE	0x2
 #define MAX_APLL_WAIT_TRIES		1000000
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index e75c64c9e81c..94f0dcd94181 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -22,6 +22,8 @@
 #include <linux/of_address.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 struct clk_ti_autoidle {
 	void __iomem		*reg;
 	u8			shift;
@@ -33,8 +35,47 @@ struct clk_ti_autoidle {
 #define AUTOIDLE_LOW		0x1
 
 static LIST_HEAD(autoidle_clks);
+static LIST_HEAD(clk_hw_omap_clocks);
 
-static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
+/**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+	struct clk_hw_omap *c;
+
+	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+		return -EINVAL;
+
+	c = to_clk_hw_omap(__clk_get_hw(clk));
+	if (c->ops && c->ops->deny_idle)
+		c->ops->deny_idle(c);
+	return 0;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+	struct clk_hw_omap *c;
+
+	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+		return -EINVAL;
+
+	c = to_clk_hw_omap(__clk_get_hw(clk));
+	if (c->ops && c->ops->allow_idle)
+		c->ops->allow_idle(c);
+	return 0;
+}
+
+static void _allow_autoidle(struct clk_ti_autoidle *clk)
 {
 	u32 val;
 
@@ -48,7 +89,7 @@ static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
 	ti_clk_ll_ops->clk_writel(val, clk->reg);
 }
 
-static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
+static void _deny_autoidle(struct clk_ti_autoidle *clk)
 {
 	u32 val;
 
@@ -63,31 +104,31 @@ static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
 }
 
 /**
- * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
+ * _clk_generic_allow_autoidle_all - enable autoidle for all clocks
  *
  * Enables hardware autoidle for all registered DT clocks, which have
  * the feature.
  */
-void of_ti_clk_allow_autoidle_all(void)
+static void _clk_generic_allow_autoidle_all(void)
 {
 	struct clk_ti_autoidle *c;
 
 	list_for_each_entry(c, &autoidle_clks, node)
-		ti_allow_autoidle(c);
+		_allow_autoidle(c);
 }
 
 /**
- * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
+ * _clk_generic_deny_autoidle_all - disable autoidle for all clocks
  *
  * Disables hardware autoidle for all registered DT clocks, which have
  * the feature.
  */
-void of_ti_clk_deny_autoidle_all(void)
+static void _clk_generic_deny_autoidle_all(void)
 {
 	struct clk_ti_autoidle *c;
 
 	list_for_each_entry(c, &autoidle_clks, node)
-		ti_deny_autoidle(c);
+		_deny_autoidle(c);
 }
 
 /**
@@ -131,3 +172,67 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
 
 	return 0;
 }
+
+/**
+ * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
+ * @clk: struct clk * to initialize
+ *
+ * Add an OMAP clock @clk to the internal list of OMAP clocks.  Used
+ * temporarily for autoidle handling, until this support can be
+ * integrated into the common clock framework code in some way.  No
+ * return value.
+ */
+void omap2_init_clk_hw_omap_clocks(struct clk *clk)
+{
+	struct clk_hw_omap *c;
+
+	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+		return;
+
+	c = to_clk_hw_omap(__clk_get_hw(clk));
+	list_add(&c->node, &clk_hw_omap_clocks);
+}
+
+/**
+ * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Enable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them.  This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code.  Returns 0.
+ */
+int omap2_clk_enable_autoidle_all(void)
+{
+	struct clk_hw_omap *c;
+
+	list_for_each_entry(c, &clk_hw_omap_clocks, node)
+		if (c->ops && c->ops->allow_idle)
+			c->ops->allow_idle(c);
+
+	_clk_generic_allow_autoidle_all();
+
+	return 0;
+}
+
+/**
+ * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Disable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them.  This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code.  Returns 0.
+ */
+int omap2_clk_disable_autoidle_all(void)
+{
+	struct clk_hw_omap *c;
+
+	list_for_each_entry(c, &clk_hw_omap_clocks, node)
+		if (c->ops && c->ops->deny_idle)
+			c->ops->deny_idle(c);
+
+	_clk_generic_deny_autoidle_all();
+
+	return 0;
+}
diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c
index c808ab3d2bb2..bd8790be2ab1 100644
--- a/drivers/clk/ti/clk-2xxx.c
+++ b/drivers/clk/ti/clk-2xxx.c
@@ -19,6 +19,8 @@
 #include <linux/clk-provider.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 static struct ti_dt_clk omap2xxx_clks[] = {
 	DT_CLK(NULL, "func_32k_ck", "func_32k_ck"),
 	DT_CLK(NULL, "secure_32k_ck", "secure_32k_ck"),
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index 028b33783d38..733f9d374d0f 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -19,6 +19,8 @@
 #include <linux/clk-provider.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 static struct ti_dt_clk am33xx_clks[] = {
 	DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
 	DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 757636d166cf..6e33332b6b34 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -19,6 +19,226 @@
 #include <linux/clk-provider.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST		120000000
+
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT			1
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT		5
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT			8
+
+#define OMAP34XX_CM_IDLEST_VAL				1
+
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK			0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET		0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET		0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL		0
+
+#define AM35XX_ST_IPSS_SHIFT			5
+
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
+ * @idlest_reg and @idlest_bit.  No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit,
+					    u8 *idlest_val)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
+	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits.  For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.)  No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
+						    void __iomem **idlest_reg,
+						    u8 *idlest_bit,
+						    u8 *idlest_val)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	/* USBHOST_IDLE has same shift */
+	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
+	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
+ * @idlest_reg and @idlest_bit.  No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
+						 void __iomem **idlest_reg,
+						 u8 *idlest_bit,
+						 u8 *idlest_val)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
+	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
+
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
+				   void __iomem **idlest_reg,
+				   u8 *idlest_bit,
+				   u8 *idlest_val)
+{
+	*idlest_reg = (__force void __iomem *)(clk->enable_reg);
+	*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+	*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks.  For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock.  Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active.  Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts.  No return value.
+ */
+static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
+				      void __iomem **other_reg,
+				      u8 *other_bit)
+{
+	*other_reg = (__force void __iomem *)(clk->enable_reg);
+	if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+		*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+	else
+	*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
+	.find_idlest	= am35xx_clk_find_idlest,
+	.find_companion	= am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit.  Pass back the correct info via @idlest_reg
+ * and @idlest_bit.  No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
+					void __iomem **idlest_reg,
+					u8 *idlest_bit,
+					u8 *idlest_val)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = AM35XX_ST_IPSS_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+	.find_idlest	= am35xx_clk_ipss_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
 
 static struct ti_dt_clk omap3xxx_clks[] = {
 	DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
@@ -324,6 +544,30 @@ enum {
 	OMAP3_SOC_OMAP3630,
 };
 
+/**
+ * omap3_clk_lock_dpll5 - locks DPLL5
+ *
+ * Locks DPLL5 to a pre-defined frequency. This is required for proper
+ * operation of USB.
+ */
+void __init omap3_clk_lock_dpll5(void)
+{
+	struct clk *dpll5_clk;
+	struct clk *dpll5_m2_clk;
+
+	dpll5_clk = clk_get(NULL, "dpll5_ck");
+	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+	clk_prepare_enable(dpll5_clk);
+
+	/* Program dpll5_m2_clk divider for no division */
+	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+	clk_prepare_enable(dpll5_m2_clk);
+	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+	clk_disable_unprepare(dpll5_m2_clk);
+	clk_disable_unprepare(dpll5_clk);
+}
+
 static int __init omap3xxx_dt_clk_init(int soc_type)
 {
 	if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 3795fce8a830..894316738459 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -19,6 +19,8 @@
 #include <linux/clk-provider.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 static struct ti_dt_clk am43xx_clks[] = {
 	DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
 	DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
index 581db7711f51..7a8b51b35f9f 100644
--- a/drivers/clk/ti/clk-44xx.c
+++ b/drivers/clk/ti/clk-44xx.c
@@ -16,6 +16,8 @@
 #include <linux/clkdev.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 /*
  * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
  * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index 96c69a335975..59ce2fa2c104 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -17,6 +17,8 @@
 #include <linux/io.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 #define OMAP5_DPLL_ABE_DEFFREQ				98304000
 
 /*
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 63b8323df918..9b5b289e6334 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -16,11 +16,12 @@
 #include <linux/clkdev.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 #define DRA7_DPLL_ABE_DEFFREQ				180633600
 #define DRA7_DPLL_GMAC_DEFFREQ				1000000000
 #define DRA7_DPLL_USB_DEFFREQ				960000000
 
-
 static struct ti_dt_clk dra7xx_clks[] = {
 	DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"),
 	DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"),
diff --git a/drivers/clk/ti/clk-816x.c b/drivers/clk/ti/clk-816x.c
index 9451e651a1ff..c69352b24dba 100644
--- a/drivers/clk/ti/clk-816x.c
+++ b/drivers/clk/ti/clk-816x.c
@@ -14,6 +14,8 @@
 #include <linux/clk-provider.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 static struct ti_dt_clk dm816x_clks[] = {
 	DT_CLK(NULL, "sys_clkin", "sys_clkin_ck"),
 	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 64bb5e8a3b8c..3343bde47fe4 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -21,6 +21,8 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/list.h>
+#include <linux/regmap.h>
+#include <linux/bootmem.h>
 
 #include "clock.h"
 
@@ -30,6 +32,63 @@
 struct ti_clk_ll_ops *ti_clk_ll_ops;
 static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
 
+struct ti_clk_features ti_clk_features;
+
+struct clk_iomap {
+	struct regmap *regmap;
+	void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+	struct clk_iomap *io = clk_memmaps[r->index];
+
+	if (io->regmap)
+		regmap_write(io->regmap, r->offset, val);
+	else
+		writel_relaxed(val, io->mem + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+	u32 val;
+	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+	struct clk_iomap *io = clk_memmaps[r->index];
+
+	if (io->regmap)
+		regmap_read(io->regmap, r->offset, &val);
+	else
+		val = readl_relaxed(io->mem + r->offset);
+
+	return val;
+}
+
+/**
+ * ti_clk_setup_ll_ops - setup low level clock operations
+ * @ops: low level clock ops descriptor
+ *
+ * Sets up low level clock operations for TI clock driver. This is used
+ * to provide various callbacks for the clock driver towards platform
+ * specific code. Returns 0 on success, -EBUSY if ll_ops have been
+ * registered already.
+ */
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
+{
+	if (ti_clk_ll_ops) {
+		pr_err("Attempt to register ll_ops multiple times.\n");
+		return -EBUSY;
+	}
+
+	ti_clk_ll_ops = ops;
+	ops->clk_readl = clk_memmap_readl;
+	ops->clk_writel = clk_memmap_writel;
+
+	return 0;
+}
+
 /**
  * ti_dt_clocks_register - register DT alias clocks during boot
  * @oclks: list of clocks to register
@@ -138,28 +197,61 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
 }
 
 /**
- * ti_dt_clk_init_provider - init master clock provider
+ * omap2_clk_provider_init - init master clock provider
  * @parent: master node
  * @index: internal index for clk_reg_ops
+ * @syscon: syscon regmap pointer for accessing clock registers
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ *       syscon is not provided
  *
  * Initializes a master clock IP block. This basically sets up the
  * mapping from clocks node to the memory map index. All the clocks
  * are then initialized through the common of_clk_init call, and the
  * clocks will access their memory maps based on the node layout.
+ * Returns 0 in success.
  */
-void ti_dt_clk_init_provider(struct device_node *parent, int index)
+int __init omap2_clk_provider_init(struct device_node *parent, int index,
+				   struct regmap *syscon, void __iomem *mem)
 {
 	struct device_node *clocks;
+	struct clk_iomap *io;
 
 	/* get clocks for this parent */
 	clocks = of_get_child_by_name(parent, "clocks");
 	if (!clocks) {
 		pr_err("%s missing 'clocks' child node.\n", parent->name);
-		return;
+		return -EINVAL;
 	}
 
 	/* add clocks node info */
 	clocks_node_ptr[index] = clocks;
+
+	io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+	io->regmap = syscon;
+	io->mem = mem;
+
+	clk_memmaps[index] = io;
+
+	return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+	struct clk_iomap *io;
+
+	io = memblock_virt_alloc(sizeof(*io), 0);
+
+	io->mem = mem;
+
+	clk_memmaps[index] = io;
 }
 
 /**
@@ -311,3 +403,50 @@ int __init ti_clk_register_legacy_clks(struct ti_clk_alias *clks)
 	return 0;
 }
 #endif
+
+/**
+ * ti_clk_setup_features - setup clock features flags
+ * @features: features definition to use
+ *
+ * Initializes the clock driver features flags based on platform
+ * provided data. No return value.
+ */
+void __init ti_clk_setup_features(struct ti_clk_features *features)
+{
+	memcpy(&ti_clk_features, features, sizeof(*features));
+}
+
+/**
+ * ti_clk_get_features - get clock driver features flags
+ *
+ * Get TI clock driver features description. Returns a pointer
+ * to the current feature setup.
+ */
+const struct ti_clk_features *ti_clk_get_features(void)
+{
+	return &ti_clk_features;
+}
+
+/**
+ * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
+ * @clk_names: ptr to an array of strings of clock names to enable
+ * @num_clocks: number of clock names in @clk_names
+ *
+ * Prepare and enable a list of clocks, named by @clk_names.  No
+ * return value. XXX Deprecated; only needed until these clocks are
+ * properly claimed and enabled by the drivers or core code that uses
+ * them.  XXX What code disables & calls clk_put on these clocks?
+ */
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
+{
+	struct clk *init_clk;
+	int i;
+
+	for (i = 0; i < num_clocks; i++) {
+		init_clk = clk_get(NULL, clk_names[i]);
+		if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
+			 clk_names[i]))
+			continue;
+		clk_prepare_enable(init_clk);
+	}
+}
diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c
new file mode 100644
index 000000000000..a176b8ac8dd0
--- /dev/null
+++ b/drivers/clk/ti/clkt_dflt.c
@@ -0,0 +1,316 @@
+/*
+ * Default clock type
+ *
+ * Copyright (C) 2005-2008, 2015 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#include "clock.h"
+
+/*
+ * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
+ * for a module to indicate that it is no longer in idle
+ */
+#define MAX_MODULE_ENABLE_WAIT		100000
+
+/*
+ * CM module register offsets, used for calculating the companion
+ * register addresses.
+ */
+#define CM_FCLKEN			0x0000
+#define CM_ICLKEN			0x0010
+
+/**
+ * _wait_idlest_generic - wait for a module to leave the idle state
+ * @clk: module clock to wait for (needed for register offsets)
+ * @reg: virtual address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
+ * @name: name of the clock (for printk)
+ *
+ * Wait for a module to leave idle, where its idle-status register is
+ * not inside the CM module.  Returns 1 if the module left idle
+ * promptly, or 0 if the module did not leave idle before the timeout
+ * elapsed.  XXX Deprecated - should be moved into drivers for the
+ * individual IP block that the IDLEST register exists in.
+ */
+static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
+				u32 mask, u8 idlest, const char *name)
+{
+	int i = 0, ena = 0;
+
+	ena = (idlest) ? 0 : mask;
+
+	/* Wait until module enters enabled state */
+	for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
+		if ((ti_clk_ll_ops->clk_readl(reg) & mask) == ena)
+			break;
+		udelay(1);
+	}
+
+	if (i < MAX_MODULE_ENABLE_WAIT)
+		pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
+			 name, i);
+	else
+		pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
+		       name, MAX_MODULE_ENABLE_WAIT);
+
+	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+}
+
+/**
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE).  This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code.  No return value.
+ */
+static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
+{
+	void __iomem *companion_reg, *idlest_reg;
+	u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
+	s16 prcm_mod;
+	int r;
+
+	/* Not all modules have multiple clocks that their IDLEST depends on */
+	if (clk->ops->find_companion) {
+		clk->ops->find_companion(clk, &companion_reg, &other_bit);
+		if (!(ti_clk_ll_ops->clk_readl(companion_reg) &
+		      (1 << other_bit)))
+			return;
+	}
+
+	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
+	r = ti_clk_ll_ops->cm_split_idlest_reg(idlest_reg, &prcm_mod,
+					       &idlest_reg_id);
+	if (r) {
+		/* IDLEST register not in the CM module */
+		_wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
+				     idlest_val, __clk_get_name(clk->hw.clk));
+	} else {
+		ti_clk_ll_ops->cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
+						    idlest_bit);
+	}
+}
+
+/**
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ *
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks.  For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock.  Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active.  Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts.  No return value.
+ */
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+				   void __iomem **other_reg, u8 *other_bit)
+{
+	u32 r;
+
+	/*
+	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
+	 * it's just a matter of XORing the bits.
+	 */
+	r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+
+	*other_reg = (__force void __iomem *)r;
+	*other_bit = clk->enable_bit;
+}
+
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock.  This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2).  This is not true for all modules.  No return value.
+ */
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+				void __iomem **idlest_reg, u8 *idlest_bit,
+				u8 *idlest_val)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = clk->enable_bit;
+
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 * AM35xx uses both, depending on the module.
+	 */
+	*idlest_val = ti_clk_get_features()->cm_idlest_val;
+}
+
+/**
+ * omap2_dflt_clk_enable - enable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to enable
+ *
+ * Enable the clock @hw in the hardware.  We first call into the OMAP
+ * clockdomain code to "enable" the corresponding clockdomain if this
+ * is the first enabled user of the clockdomain.  Then program the
+ * hardware to enable the clock.  Then wait for the IP block that uses
+ * this clock to leave idle (if applicable).  Returns the error value
+ * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
+ * if @hw has a null clock enable_reg, or zero upon success.
+ */
+int omap2_dflt_clk_enable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+	u32 v;
+	int ret = 0;
+	bool clkdm_control;
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+		clkdm_control = false;
+	else
+		clkdm_control = true;
+
+	clk = to_clk_hw_omap(hw);
+
+	if (clkdm_control && clk->clkdm) {
+		ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+		if (ret) {
+			WARN(1,
+			     "%s: could not enable %s's clockdomain %s: %d\n",
+			     __func__, __clk_get_name(hw->clk),
+			     clk->clkdm_name, ret);
+			return ret;
+		}
+	}
+
+	if (unlikely(!clk->enable_reg)) {
+		pr_err("%s: %s missing enable_reg\n", __func__,
+		       __clk_get_name(hw->clk));
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* FIXME should not have INVERT_ENABLE bit here */
+	v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+	if (clk->flags & INVERT_ENABLE)
+		v &= ~(1 << clk->enable_bit);
+	else
+		v |= (1 << clk->enable_bit);
+	ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+	v = ti_clk_ll_ops->clk_readl(clk->enable_reg); /* OCP barrier */
+
+	if (clk->ops && clk->ops->find_idlest)
+		_omap2_module_wait_ready(clk);
+
+	return 0;
+
+err:
+	if (clkdm_control && clk->clkdm)
+		ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+	return ret;
+}
+
+/**
+ * omap2_dflt_clk_disable - disable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to disable
+ *
+ * Disable the clock @hw in the hardware, and call into the OMAP
+ * clockdomain code to "disable" the corresponding clockdomain if all
+ * clocks/hwmods in that clockdomain are now disabled.  No return
+ * value.
+ */
+void omap2_dflt_clk_disable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+	u32 v;
+
+	clk = to_clk_hw_omap(hw);
+	if (!clk->enable_reg) {
+		/*
+		 * 'independent' here refers to a clock which is not
+		 * controlled by its parent.
+		 */
+		pr_err("%s: independent clock %s has no enable_reg\n",
+		       __func__, __clk_get_name(hw->clk));
+		return;
+	}
+
+	v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+	if (clk->flags & INVERT_ENABLE)
+		v |= (1 << clk->enable_bit);
+	else
+		v &= ~(1 << clk->enable_bit);
+	ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+	/* No OCP barrier needed here since it is a disable operation */
+
+	if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+	    clk->clkdm)
+		ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/**
+ * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
+ * @hw: struct clk_hw * to check
+ *
+ * Return 1 if the clock represented by @hw is enabled in the
+ * hardware, or 0 otherwise.  Intended for use in the struct
+ * clk_ops.is_enabled function pointer.
+ */
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	u32 v;
+
+	v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+
+	if (clk->flags & INVERT_ENABLE)
+		v ^= BIT(clk->enable_bit);
+
+	v &= BIT(clk->enable_bit);
+
+	return v ? 1 : 0;
+}
+
+const struct clk_hw_omap_ops clkhwops_wait = {
+	.find_idlest	= omap2_clk_dflt_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clkt_dpll.c b/drivers/clk/ti/clkt_dpll.c
new file mode 100644
index 000000000000..a01fc7f305c1
--- /dev/null
+++ b/drivers/clk/ti/clkt_dpll.c
@@ -0,0 +1,369 @@
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include <asm/div64.h>
+
+#include "clock.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER		2
+#define DPLL_MIN_DIVIDER		1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW		-1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR		64
+#define DPLL_SCALE_BASE			2
+#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
+					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN	500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX	2500000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW		-1
+#define DPLL_FINT_INVALID		-2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
+{
+	struct dpll_data *dd;
+	long fint, fint_min, fint_max;
+	int ret = 0;
+
+	dd = clk->dpll_data;
+
+	/* DPLL divider must result in a valid jitter correction val */
+	fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
+
+	if (dd->flags & DPLL_J_TYPE) {
+		fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+		fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+	} else {
+		fint_min = ti_clk_get_features()->fint_min;
+		fint_max = ti_clk_get_features()->fint_max;
+	}
+
+	if (!fint_min || !fint_max) {
+		WARN(1, "No fint limits available!\n");
+		return DPLL_FINT_INVALID;
+	}
+
+	if (fint < ti_clk_get_features()->fint_min) {
+		pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+			 n);
+		dd->max_divider = n;
+		ret = DPLL_FINT_UNDERFLOW;
+	} else if (fint > ti_clk_get_features()->fint_max) {
+		pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+			 n);
+		dd->min_divider = n;
+		ret = DPLL_FINT_INVALID;
+	} else if (fint > ti_clk_get_features()->fint_band1_max &&
+		   fint < ti_clk_get_features()->fint_band2_min) {
+		pr_debug("rejecting n=%d due to Fint failure\n", n);
+		ret = DPLL_FINT_INVALID;
+	}
+
+	return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+					    unsigned int m, unsigned int n)
+{
+	unsigned long long num;
+
+	num = (unsigned long long)parent_rate * m;
+	do_div(num, n);
+	return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL.  Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
+ * a non-scaled m upon return.  This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+			   unsigned long target_rate,
+			   unsigned long parent_rate)
+{
+	int r = 0, carry = 0;
+
+	/* Unscale m and round if necessary */
+	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+		carry = 1;
+	*m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+	/*
+	 * The new rate must be <= the target rate to avoid programming
+	 * a rate that is impossible for the hardware to handle
+	 */
+	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+	if (*new_rate > target_rate) {
+		(*m)--;
+		*new_rate = 0;
+	}
+
+	/* Guard against m underflow */
+	if (*m < DPLL_MIN_MULTIPLIER) {
+		*m = DPLL_MIN_MULTIPLIER;
+		*new_rate = 0;
+		r = DPLL_MULT_UNDERFLOW;
+	}
+
+	if (*new_rate == 0)
+		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+	return r;
+}
+
+/**
+ * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
+ * @v: bitfield value of the DPLL enable
+ *
+ * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
+ * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
+ */
+static int _omap2_dpll_is_in_bypass(u32 v)
+{
+	u8 mask, val;
+
+	mask = ti_clk_get_features()->dpll_bypass_vals;
+
+	/*
+	 * Each set bit in the mask corresponds to a bypass value equal
+	 * to the bitshift. Go through each set-bit in the mask and
+	 * compare against the given register value.
+	 */
+	while (mask) {
+		val = __ffs(mask);
+		mask ^= (1 << val);
+		if (v == val)
+			return 1;
+	}
+
+	return 0;
+}
+
+/* Public functions */
+u8 omap2_init_dpll_parent(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	u32 v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* Reparent the struct clk in case the dpll is in bypass */
+	if (_omap2_dpll_is_in_bypass(v))
+		return 1;
+
+	return 0;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values.  When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
+{
+	long long dpll_clk;
+	u32 dpll_mult, dpll_div, v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return 0;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	if (_omap2_dpll_is_in_bypass(v))
+		return __clk_get_rate(dd->clk_bypass);
+
+	v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+	dpll_mult = v & dd->mult_mask;
+	dpll_mult >>= __ffs(dd->mult_mask);
+	dpll_div = v & dd->div1_mask;
+	dpll_div >>= __ffs(dd->div1_mask);
+
+	dpll_clk = (long long)__clk_get_rate(dd->clk_ref) * dpll_mult;
+	do_div(dpll_clk, dpll_div + 1);
+
+	return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL and a desired target rate, round the target rate to a
+ * possible, programmable rate for this DPLL.  Attempts to select the
+ * minimum possible n.  Stores the computed (m, n) in the DPLL's
+ * dpll_data structure so set_rate() will not need to call this
+ * (expensive) function again.  Returns ~0 if the target rate cannot
+ * be rounded, or the rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+			   unsigned long *parent_rate)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	int m, n, r, scaled_max_m;
+	int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
+	unsigned long scaled_rt_rp;
+	unsigned long new_rate = 0;
+	struct dpll_data *dd;
+	unsigned long ref_rate;
+	long delta;
+	long prev_min_delta = LONG_MAX;
+	const char *clk_name;
+
+	if (!clk || !clk->dpll_data)
+		return ~0;
+
+	dd = clk->dpll_data;
+
+	ref_rate = __clk_get_rate(dd->clk_ref);
+	clk_name = __clk_get_name(hw->clk);
+	pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
+		 clk_name, target_rate);
+
+	scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
+	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+	dd->last_rounded_rate = 0;
+
+	for (n = dd->min_divider; n <= dd->max_divider; n++) {
+		/* Is the (input clk, divider) pair valid for the DPLL? */
+		r = _dpll_test_fint(clk, n);
+		if (r == DPLL_FINT_UNDERFLOW)
+			break;
+		else if (r == DPLL_FINT_INVALID)
+			continue;
+
+		/* Compute the scaled DPLL multiplier, based on the divider */
+		m = scaled_rt_rp * n;
+
+		/*
+		 * Since we're counting n up, a m overflow means we
+		 * can bail out completely (since as n increases in
+		 * the next iteration, there's no way that m can
+		 * increase beyond the current m)
+		 */
+		if (m > scaled_max_m)
+			break;
+
+		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+				    ref_rate);
+
+		/* m can't be set low enough for this n - try with a larger n */
+		if (r == DPLL_MULT_UNDERFLOW)
+			continue;
+
+		/* skip rates above our target rate */
+		delta = target_rate - new_rate;
+		if (delta < 0)
+			continue;
+
+		if (delta < prev_min_delta) {
+			prev_min_delta = delta;
+			min_delta_m = m;
+			min_delta_n = n;
+		}
+
+		pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
+			 clk_name, m, n, new_rate);
+
+		if (delta == 0)
+			break;
+	}
+
+	if (prev_min_delta == LONG_MAX) {
+		pr_debug("clock: %s: cannot round to rate %lu\n",
+			 clk_name, target_rate);
+		return ~0;
+	}
+
+	dd->last_rounded_m = min_delta_m;
+	dd->last_rounded_n = min_delta_n;
+	dd->last_rounded_rate = target_rate - prev_min_delta;
+
+	return dd->last_rounded_rate;
+}
diff --git a/drivers/clk/ti/clkt_iclk.c b/drivers/clk/ti/clkt_iclk.c
new file mode 100644
index 000000000000..38c36908cf88
--- /dev/null
+++ b/drivers/clk/ti/clkt_iclk.c
@@ -0,0 +1,101 @@
+/*
+ * OMAP2/3 interface clock control
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* Register offsets */
+#define OMAP24XX_CM_FCLKEN2		0x04
+#define CM_AUTOIDLE			0x30
+#define CM_ICLKEN			0x10
+#define CM_IDLEST			0x20
+
+#define OMAP24XX_CM_IDLEST_VAL		0
+
+/* Private functions */
+
+/* XXX */
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
+{
+	u32 v;
+	void __iomem *r;
+
+	r = (__force void __iomem *)
+		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+	v = ti_clk_ll_ops->clk_readl(r);
+	v |= (1 << clk->enable_bit);
+	ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/* XXX */
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
+{
+	u32 v;
+	void __iomem *r;
+
+	r = (__force void __iomem *)
+		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+	v = ti_clk_ll_ops->clk_readl(r);
+	v &= ~(1 << clk->enable_bit);
+	ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules.  No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit,
+					   u8 *idlest_val)
+{
+	u32 r;
+
+	r = ((__force u32)clk->enable_reg ^ (OMAP24XX_CM_FCLKEN2 ^ CM_IDLEST));
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = clk->enable_bit;
+	*idlest_val = OMAP24XX_CM_IDLEST_VAL;
+}
+
+/* Public data */
+
+const struct clk_hw_omap_ops clkhwops_iclk = {
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+};
+
+const struct clk_hw_omap_ops clkhwops_iclk_wait = {
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+	.find_idlest	= omap2_clk_dflt_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
+	.find_idlest	= omap2430_clk_i2chs_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 404158d2d7f8..d8aafd333058 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -154,6 +154,35 @@ struct ti_clk_dpll {
 	u8 recal_st_bit;
 };
 
+/* Composite clock component types */
+enum {
+	CLK_COMPONENT_TYPE_GATE = 0,
+	CLK_COMPONENT_TYPE_DIVIDER,
+	CLK_COMPONENT_TYPE_MUX,
+	CLK_COMPONENT_TYPE_MAX,
+};
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+	struct clk_lookup		lk;
+	char				*node_name;
+};
+
+#define DT_CLK(dev, con, name)		\
+	{				\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+		},			\
+		.node_name = name,	\
+	}
+
+typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
+
 struct clk *ti_clk_register_gate(struct ti_clk *setup);
 struct clk *ti_clk_register_interface(struct ti_clk *setup);
 struct clk *ti_clk_register_mux(struct ti_clk *setup);
@@ -169,4 +198,80 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
 struct clk *ti_clk_register_clk(struct ti_clk *setup);
 int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
 
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
+		      ti_of_clk_init_cb_t func);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
+
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
+
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+
+extern const struct clk_ops ti_clk_divider_ops;
+extern const struct clk_ops ti_clk_mux_ops;
+
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+				   void __iomem **other_reg,
+				   u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+				void __iomem **idlest_reg,
+				u8 *idlest_bit, u8 *idlest_val);
+
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
+
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate);
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+					   unsigned long rate,
+					   unsigned long parent_rate,
+					   u8 index);
+int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+				      struct clk_rate_request *req);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+			   unsigned long *parent_rate);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate);
+
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+			 unsigned long parent_rate);
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate, u8 index);
+void omap3_clk_lock_dpll5(void);
+
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+					 unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+				    unsigned long target_rate,
+				    unsigned long *parent_rate);
+int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+				       struct clk_rate_request *req);
+
+extern struct ti_clk_ll_ops *ti_clk_ll_ops;
+
 #endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index b82ef07f3403..fc517453321b 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -21,9 +21,87 @@
 #include <linux/of_address.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 #undef pr_fmt
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
+/**
+ * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being enabled
+ *
+ * Increment the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 1, the clockdomain will be "enabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_enable() as
+ * their enable function pointer.  Passes along the return value of
+ * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
+ * clockdomain, or 0 if clock framework-based clockdomain control is
+ * not implemented.
+ */
+int omap2_clkops_enable_clkdm(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+	int ret = 0;
+
+	clk = to_clk_hw_omap(hw);
+
+	if (unlikely(!clk->clkdm)) {
+		pr_err("%s: %s: no clkdm set ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	if (unlikely(clk->enable_reg))
+		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+		       __func__, __clk_get_name(hw->clk));
+		return 0;
+	}
+
+	ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+	WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
+	     __func__, __clk_get_name(hw->clk), clk->clkdm_name, ret);
+
+	return ret;
+}
+
+/**
+ * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being disabled
+ *
+ * Decrement the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 0, the clockdomain will be "disabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
+ * disable function pointer.  No return value.
+ */
+void omap2_clkops_disable_clkdm(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+
+	clk = to_clk_hw_omap(hw);
+
+	if (unlikely(!clk->clkdm)) {
+		pr_err("%s: %s: no clkdm set ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+		return;
+	}
+
+	if (unlikely(clk->enable_reg))
+		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+		       __func__, __clk_get_name(hw->clk));
+		return;
+	}
+
+	ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
 static void __init of_ti_clockdomain_setup(struct device_node *node)
 {
 	struct clk *clk;
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
new file mode 100644
index 000000000000..b0aa87b35f24
--- /dev/null
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -0,0 +1,820 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE			0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
+
+#define MAX_DPLL_WAIT_TRIES		1000000
+
+#define OMAP3XXX_EN_DPLL_LOCKED		0x7
+
+/* Forward declarations */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
+
+/* Private functions */
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	dd = clk->dpll_data;
+
+	v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+	v &= ~dd->enable_mask;
+	v |= clken_bits << __ffs(dd->enable_mask);
+	ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
+{
+	const struct dpll_data *dd;
+	int i = 0;
+	int ret = -EINVAL;
+	const char *clk_name;
+
+	dd = clk->dpll_data;
+	clk_name = __clk_get_name(clk->hw.clk);
+
+	state <<= __ffs(dd->idlest_mask);
+
+	while (((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask)
+		!= state) && i < MAX_DPLL_WAIT_TRIES) {
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("clock: %s failed transition to '%s'\n",
+		       clk_name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk_name, (state) ? "locked" : "bypassed", i);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
+{
+	unsigned long fint;
+	u16 f = 0;
+
+	fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
+
+	pr_debug("clock: fint is %lu\n", fint);
+
+	if (fint >= 750000 && fint <= 1000000)
+		f = 0x3;
+	else if (fint > 1000000 && fint <= 1250000)
+		f = 0x4;
+	else if (fint > 1250000 && fint <= 1500000)
+		f = 0x5;
+	else if (fint > 1500000 && fint <= 1750000)
+		f = 0x6;
+	else if (fint > 1750000 && fint <= 2100000)
+		f = 0x7;
+	else if (fint > 7500000 && fint <= 10000000)
+		f = 0xB;
+	else if (fint > 10000000 && fint <= 12500000)
+		f = 0xC;
+	else if (fint > 12500000 && fint <= 15000000)
+		f = 0xD;
+	else if (fint > 15000000 && fint <= 17500000)
+		f = 0xE;
+	else if (fint > 17500000 && fint <= 21000000)
+		f = 0xF;
+	else
+		pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+	return f;
+}
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
+ * readiness before returning.  Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code.  If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
+{
+	const struct dpll_data *dd;
+	u8 ai;
+	u8 state = 1;
+	int r = 0;
+
+	pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+	dd = clk->dpll_data;
+	state <<= __ffs(dd->idlest_mask);
+
+	/* Check if already locked */
+	if ((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) ==
+	    state)
+		goto done;
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	if (ai)
+		omap3_dpll_deny_idle(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+	r = _omap3_wait_dpll_status(clk, 1);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+
+done:
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate.  Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code.  If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
+{
+	int r;
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+		return -EINVAL;
+
+	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+		 __clk_get_name(clk->hw.clk));
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+	r = _omap3_wait_dpll_status(clk, 0);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code.  If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
+{
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+		return -EINVAL;
+
+	pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+
+	return 0;
+}
+
+/**
+ * _lookup_dco - Lookup DCO used by j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
+{
+	unsigned long fint, clkinp; /* watch out for overflow */
+
+	clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+	fint = (clkinp / n) * m;
+
+	if (fint < 1000000000)
+		*dco = 2;
+	else
+		*dco = 4;
+}
+
+/**
+ * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
+{
+	unsigned long clkinp, sd; /* watch out for overflow */
+	int mod1, mod2;
+
+	clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+
+	/*
+	 * target sigma-delta to near 250MHz
+	 * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+	 */
+	clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+	mod1 = (clkinp * m) % (250 * n);
+	sd = (clkinp * m) / (250 * n);
+	mod2 = sd % 10;
+	sd /= 10;
+
+	if (mod1 || mod2)
+		sd++;
+	*sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk:	struct clk * of DPLL to set
+ * @freqsel:	FREQSEL value to set
+ *
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
+{
+	struct dpll_data *dd = clk->dpll_data;
+	u8 dco, sd_div;
+	u32 v;
+
+	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+	_omap3_noncore_dpll_bypass(clk);
+
+	/*
+	 * Set jitter correction. Jitter correction applicable for OMAP343X
+	 * only since freqsel field is no longer present on other devices.
+	 */
+	if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+		v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+		v &= ~dd->freqsel_mask;
+		v |= freqsel << __ffs(dd->freqsel_mask);
+		ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+	}
+
+	/* Set DPLL multiplier, divider */
+	v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+
+	/* Handle Duty Cycle Correction */
+	if (dd->dcc_mask) {
+		if (dd->last_rounded_rate >= dd->dcc_rate)
+			v |= dd->dcc_mask; /* Enable DCC */
+		else
+			v &= ~dd->dcc_mask; /* Disable DCC */
+	}
+
+	v &= ~(dd->mult_mask | dd->div1_mask);
+	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
+
+	/* Configure dco and sd_div for dplls that have these fields */
+	if (dd->dco_mask) {
+		_lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
+		v &= ~(dd->dco_mask);
+		v |= dco << __ffs(dd->dco_mask);
+	}
+	if (dd->sddiv_mask) {
+		_lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+			      dd->last_rounded_n);
+		v &= ~(dd->sddiv_mask);
+		v |= sd_div << __ffs(dd->sddiv_mask);
+	}
+
+	ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
+
+	/* Set 4X multiplier and low-power mode */
+	if (dd->m4xen_mask || dd->lpmode_mask) {
+		v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+
+		if (dd->m4xen_mask) {
+			if (dd->last_rounded_m4xen)
+				v |= dd->m4xen_mask;
+			else
+				v &= ~dd->m4xen_mask;
+		}
+
+		if (dd->lpmode_mask) {
+			if (dd->last_rounded_lpmode)
+				v |= dd->lpmode_mask;
+			else
+				v &= ~dd->lpmode_mask;
+		}
+
+		ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+	}
+
+	/* We let the clock framework set the other output dividers later */
+
+	/* REVISIT: Set ramp-up delay? */
+
+	_omap3_noncore_dpll_lock(clk);
+
+	return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+	return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	int r;
+	struct dpll_data *dd;
+	struct clk_hw *parent;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk->clkdm) {
+		r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+		if (r) {
+			WARN(1,
+			     "%s: could not enable %s's clockdomain %s: %d\n",
+			     __func__, __clk_get_name(hw->clk),
+			     clk->clkdm_name, r);
+			return r;
+		}
+	}
+
+	parent = __clk_get_hw(__clk_get_parent(hw->clk));
+
+	if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
+		WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
+		r = _omap3_noncore_dpll_bypass(clk);
+	} else {
+		WARN_ON(parent != __clk_get_hw(dd->clk_ref));
+		r = _omap3_noncore_dpll_lock(clk);
+	}
+
+	return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop.  This function is
+ * intended for use in struct clkops.  No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+	_omap3_noncore_dpll_stop(clk);
+	if (clk->clkdm)
+		ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/* Non-CORE DPLL rate set code */
+
+/**
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @req: target rate request
+ *
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a 0 on success, negative error value in failure.
+ */
+int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+				      struct clk_rate_request *req)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *dd;
+
+	if (!req->rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (__clk_get_rate(dd->clk_bypass) == req->rate &&
+	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+	} else {
+		req->rate = omap2_dpll_round_rate(hw, req->rate,
+					  &req->best_parent_rate);
+		req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+	}
+
+	req->best_parent_rate = req->rate;
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	int ret;
+
+	if (!hw)
+		return -EINVAL;
+
+	if (index)
+		ret = _omap3_noncore_dpll_bypass(clk);
+	else
+		ret = _omap3_noncore_dpll_lock(clk);
+
+	return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *dd;
+	u16 freqsel = 0;
+	int ret;
+
+	if (!hw || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
+	    __clk_get_hw(dd->clk_ref))
+		return -EINVAL;
+
+	if (dd->last_rounded_rate == 0)
+		return -EINVAL;
+
+	/* Freqsel is available only on OMAP343X devices */
+	if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+		WARN_ON(!freqsel);
+	}
+
+	pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+		 __clk_get_name(hw->clk), rate);
+
+	ret = omap3_noncore_dpll_program(clk, freqsel);
+
+	return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+					   unsigned long rate,
+					   unsigned long parent_rate,
+					   u8 index)
+{
+	int ret;
+
+	if (!hw || !rate)
+		return -EINVAL;
+
+	/*
+	 * clk-ref at index[0], in which case we only need to set rate,
+	 * the parent will be changed automatically with the lock sequence.
+	 * With clk-bypass case we only need to change parent.
+	 */
+	if (index)
+		ret = omap3_noncore_dpll_set_parent(hw, index);
+	else
+		ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+	return ret;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	if (!dd->autoidle_reg)
+		return -EINVAL;
+
+	v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+	v &= dd->autoidle_mask;
+	v >>= __ffs(dd->autoidle_mask);
+
+	return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430.  The DPLL will enter low-power stop when its downstream
+ * clocks are gated.  No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	if (!dd->autoidle_reg)
+		return;
+
+	/*
+	 * REVISIT: CORE DPLL can optionally enter low-power bypass
+	 * by writing 0x5 instead of 0x1.  Add some mechanism to
+	 * optionally enter this mode.
+	 */
+	v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+	ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	if (!dd->autoidle_reg)
+		return;
+
+	v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+	ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+	struct clk_hw_omap *pclk = NULL;
+	struct clk *parent;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	do {
+		do {
+			parent = __clk_get_parent(hw->clk);
+			hw = __clk_get_hw(parent);
+		} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+		if (!hw)
+			break;
+		pclk = to_clk_hw_omap(hw);
+	} while (pclk && !pclk->dpll_data);
+
+	/* clk does not have a DPLL as a parent?  error in the clock data */
+	if (!pclk) {
+		WARN_ON(1);
+		return NULL;
+	}
+
+	return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate)
+{
+	const struct dpll_data *dd;
+	unsigned long rate;
+	u32 v;
+	struct clk_hw_omap *pclk = NULL;
+
+	if (!parent_rate)
+		return 0;
+
+	pclk = omap3_find_clkoutx2_dpll(hw);
+
+	if (!pclk)
+		return 0;
+
+	dd = pclk->dpll_data;
+
+	WARN_ON(!dd->enable_mask);
+
+	v = ti_clk_ll_ops->clk_readl(dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
+		rate = parent_rate;
+	else
+		rate = parent_rate * 2;
+	return rate;
+}
+
+/* OMAP3/4 non-CORE DPLL clkops */
+const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
+int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
+			 unsigned long parent_rate)
+{
+	/*
+	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
+	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+	 * on DPLL4.
+	 */
+	if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+
+	return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+}
+
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate, u8 index)
+{
+	if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+
+	return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+						      index);
+}
diff --git a/drivers/clk/ti/dpll44xx.c b/drivers/clk/ti/dpll44xx.c
new file mode 100644
index 000000000000..73af77a90586
--- /dev/null
+++ b/drivers/clk/ti/dpll44xx.c
@@ -0,0 +1,227 @@
+/*
+ * OMAP4-specific DPLL control functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/*
+ * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
+ * can supported when using the DPLL low-power mode. Frequencies are
+ * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
+ * Status, and Low-Power Operation Mode".
+ */
+#define OMAP4_DPLL_LP_FINT_MAX	1000000
+#define OMAP4_DPLL_LP_FOUT_MAX	100000000
+
+/*
+ * Bitfield declarations
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK		BIT(8)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK		BIT(10)
+#define OMAP4430_DPLL_REGM4XEN_MASK			BIT(11)
+
+/* Static rate multiplier for OMAP4 REGM4XEN clocks */
+#define OMAP4430_REGM4XEN_MULT				4
+
+static void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
+{
+	u32 v;
+	u32 mask;
+
+	if (!clk || !clk->clksel_reg)
+		return;
+
+	mask = clk->flags & CLOCK_CLKOUTX2 ?
+			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+	v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+	/* Clear the bit to allow gatectrl */
+	v &= ~mask;
+	ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+static void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
+{
+	u32 v;
+	u32 mask;
+
+	if (!clk || !clk->clksel_reg)
+		return;
+
+	mask = clk->flags & CLOCK_CLKOUTX2 ?
+			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+	v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+	/* Set the bit to deny gatectrl */
+	v |= mask;
+	ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
+	.allow_idle	= omap4_dpllmx_allow_gatectrl,
+	.deny_idle      = omap4_dpllmx_deny_gatectrl,
+};
+
+/**
+ * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
+ * @dd: pointer to the dpll data structure
+ *
+ * Calculates if low-power mode can be enabled based upon the last
+ * multiplier and divider values calculated. If low-power mode can be
+ * enabled, then the bit to enable low-power mode is stored in the
+ * last_rounded_lpmode variable. This implementation is based upon the
+ * criteria for enabling low-power mode as described in the OMAP4430/60
+ * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
+ * Operation Mode".
+ */
+static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
+{
+	long fint, fout;
+
+	fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+	fout = fint * dd->last_rounded_m;
+
+	if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
+		dd->last_rounded_lpmode = 1;
+	else
+		dd->last_rounded_lpmode = 0;
+}
+
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL.  Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	u32 v;
+	unsigned long rate;
+	struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return 0;
+
+	dd = clk->dpll_data;
+
+	rate = omap2_get_dpll_rate(clk);
+
+	/* regm4xen adds a multiplier of 4 to DPLL calculations */
+	v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+		rate *= OMAP4430_REGM4XEN_MULT;
+
+	return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate.  Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL.  Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+				    unsigned long target_rate,
+				    unsigned long *parent_rate)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *dd;
+	long r;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	dd->last_rounded_m4xen = 0;
+
+	/*
+	 * First try to compute the DPLL configuration for
+	 * target rate without using the 4X multiplier.
+	 */
+	r = omap2_dpll_round_rate(hw, target_rate, NULL);
+	if (r != ~0)
+		goto out;
+
+	/*
+	 * If we did not find a valid DPLL configuration, try again, but
+	 * this time see if using the 4X multiplier can help. Enabling the
+	 * 4X multiplier is equivalent to dividing the target rate by 4.
+	 */
+	r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
+				  NULL);
+	if (r == ~0)
+		return r;
+
+	dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+	dd->last_rounded_m4xen = 1;
+
+out:
+	omap4_dpll_lpmode_recalc(dd);
+
+	return dd->last_rounded_rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @req: target rate request
+ *
+ * Determines which DPLL mode to use for reaching a desired rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns 0 on success and a negative error value otherwise.
+ */
+int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+				       struct clk_rate_request *req)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *dd;
+
+	if (!req->rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (__clk_get_rate(dd->clk_bypass) == req->rate &&
+	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+	} else {
+		req->rate = omap4_dpll_regm4xen_round_rate(hw, req->rate,
+						&req->best_parent_rate);
+		req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+	}
+
+	req->best_parent_rate = req->rate;
+
+	return 0;
+}
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
index c2c8a287408c..3cd406768909 100644
--- a/drivers/clk/ti/fixed-factor.c
+++ b/drivers/clk/ti/fixed-factor.c
@@ -22,6 +22,8 @@
 #include <linux/of_address.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 #undef pr_fmt
 #define pr_fmt(fmt) "%s: " fmt, __func__