diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-25 01:40:57 +0200 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-25 01:40:57 +0200 |
commit | 9161c3b796a2841a9a7be3d9c9dd121269ce90e8 (patch) | |
tree | 4920a191c4a2eecae1a4e055af7e967f1e769714 /drivers/clk | |
parent | Merge tag 'iommu-updates-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kern... (diff) | |
parent | clk: fix compile for OF && !COMMON_CLK (diff) | |
download | linux-9161c3b796a2841a9a7be3d9c9dd121269ce90e8.tar.xz linux-9161c3b796a2841a9a7be3d9c9dd121269ce90e8.zip |
Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux
Pull common clk framework changes from Michael Turquette:
"This includes a small number of core framework improvments, platform
ports and new DT bindings."
Fix up trivial conflicts in drivers/clk/Makefile
* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits)
clk: fix compile for OF && !COMMON_CLK
clk: fix clk_get on of_clk_get_by_name return check
clk: mxs: clk_register_clkdev mx28 usb clocks
clk: add highbank clock support
dt: add clock binding doc to primecell bindings
clk: add DT fixed-clock binding support
clk: add DT clock binding support
ARM: integrator: convert to common clock
clk: add versatile ICST307 driver
ARM: integrator: put symbolic bus names on devices
ARM: u300: convert to common clock
clk: cache parent clocks only for muxes
clk: wm831x: Add initial WM831x clock driver
clk: Constify struct clk_init_data
clk: Add CLK_IS_BASIC flag to identify basic clocks
clk: Add support for rate table based dividers
clk: Add support for power of two type dividers
clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
clk: mxs: add clkdev lookup for pwm
clk: mxs: Fix the GPMI clock name
...
Diffstat (limited to 'drivers/clk')
-rw-r--r-- | drivers/clk/Kconfig | 7 | ||||
-rw-r--r-- | drivers/clk/Makefile | 8 | ||||
-rw-r--r-- | drivers/clk/clk-divider.c | 189 | ||||
-rw-r--r-- | drivers/clk/clk-fixed-factor.c | 2 | ||||
-rw-r--r-- | drivers/clk/clk-fixed-rate.c | 25 | ||||
-rw-r--r-- | drivers/clk/clk-gate.c | 2 | ||||
-rw-r--r-- | drivers/clk/clk-highbank.c | 346 | ||||
-rw-r--r-- | drivers/clk/clk-mux.c | 2 | ||||
-rw-r--r-- | drivers/clk/clk-u300.c | 746 | ||||
-rw-r--r-- | drivers/clk/clk-wm831x.c | 428 | ||||
-rw-r--r-- | drivers/clk/clk.c | 144 | ||||
-rw-r--r-- | drivers/clk/clkdev.c | 77 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-imx23.c | 3 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-imx28.c | 13 | ||||
-rw-r--r-- | drivers/clk/versatile/Makefile | 3 | ||||
-rw-r--r-- | drivers/clk/versatile/clk-icst.c | 100 | ||||
-rw-r--r-- | drivers/clk/versatile/clk-icst.h | 10 | ||||
-rw-r--r-- | drivers/clk/versatile/clk-integrator.c | 111 |
18 files changed, 2170 insertions, 46 deletions
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 4864407e3fc4..3f99b9099658 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -34,4 +34,11 @@ config COMMON_CLK_DEBUG clk_flags, clk_prepare_count, clk_enable_count & clk_notifier_count. +config COMMON_CLK_WM831X + tristate "Clock driver for WM831x/2x PMICs" + depends on MFD_WM831X + ---help--- + Supports the clocking subsystem of the WM831x/2x series of + PMICs from Wolfson Microlectronics. + endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 3669761d1bac..5869ea387054 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,9 +1,15 @@ - +# common clock types obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o # SoCs specific obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o +obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ +obj-$(CONFIG_ARCH_U300) += clk-u300.o +obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/ + +# Chip specific +obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 8ea11b444528..a9204c69148d 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -30,18 +30,89 @@ #define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) #define div_mask(d) ((1 << (d->width)) - 1) +#define is_power_of_two(i) !(i & ~i) + +static unsigned int _get_table_maxdiv(const struct clk_div_table *table) +{ + unsigned int maxdiv = 0; + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->div > maxdiv) + maxdiv = clkt->div; + return maxdiv; +} + +static unsigned int _get_maxdiv(struct clk_divider *divider) +{ + if (divider->flags & CLK_DIVIDER_ONE_BASED) + return div_mask(divider); + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return 1 << div_mask(divider); + if (divider->table) + return _get_table_maxdiv(divider->table); + return div_mask(divider) + 1; +} + +static unsigned int _get_table_div(const struct clk_div_table *table, + unsigned int val) +{ + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->val == val) + return clkt->div; + return 0; +} + +static unsigned int _get_div(struct clk_divider *divider, unsigned int val) +{ + if (divider->flags & CLK_DIVIDER_ONE_BASED) + return val; + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return 1 << val; + if (divider->table) + return _get_table_div(divider->table, val); + return val + 1; +} + +static unsigned int _get_table_val(const struct clk_div_table *table, + unsigned int div) +{ + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->div == div) + return clkt->val; + return 0; +} + +static unsigned int _get_val(struct clk_divider *divider, u8 div) +{ + if (divider->flags & CLK_DIVIDER_ONE_BASED) + return div; + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return __ffs(div); + if (divider->table) + return _get_table_val(divider->table, div); + return div - 1; +} static unsigned long clk_divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_divider *divider = to_clk_divider(hw); - unsigned int div; + unsigned int div, val; - div = readl(divider->reg) >> divider->shift; - div &= div_mask(divider); + val = readl(divider->reg) >> divider->shift; + val &= div_mask(divider); - if (!(divider->flags & CLK_DIVIDER_ONE_BASED)) - div++; + div = _get_div(divider, val); + if (!div) { + WARN(1, "%s: Invalid divisor for clock %s\n", __func__, + __clk_get_name(hw->clk)); + return parent_rate; + } return parent_rate / div; } @@ -52,6 +123,26 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw, */ #define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1) +static bool _is_valid_table_div(const struct clk_div_table *table, + unsigned int div) +{ + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->div == div) + return true; + return false; +} + +static bool _is_valid_div(struct clk_divider *divider, unsigned int div) +{ + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return is_power_of_two(div); + if (divider->table) + return _is_valid_table_div(divider->table, div); + return true; +} + static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate) { @@ -62,10 +153,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, if (!rate) rate = 1; - maxdiv = (1 << divider->width); - - if (divider->flags & CLK_DIVIDER_ONE_BASED) - maxdiv--; + maxdiv = _get_maxdiv(divider); if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) { parent_rate = *best_parent_rate; @@ -82,6 +170,8 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, maxdiv = min(ULONG_MAX / rate, maxdiv); for (i = 1; i <= maxdiv; i++) { + if (!_is_valid_div(divider, i)) + continue; parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), MULT_ROUND_UP(rate, i)); now = parent_rate / i; @@ -93,9 +183,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, } if (!bestdiv) { - bestdiv = (1 << divider->width); - if (divider->flags & CLK_DIVIDER_ONE_BASED) - bestdiv--; + bestdiv = _get_maxdiv(divider); *best_parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), 1); } @@ -115,24 +203,22 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct clk_divider *divider = to_clk_divider(hw); - unsigned int div; + unsigned int div, value; unsigned long flags = 0; u32 val; div = parent_rate / rate; + value = _get_val(divider, div); - if (!(divider->flags & CLK_DIVIDER_ONE_BASED)) - div--; - - if (div > div_mask(divider)) - div = div_mask(divider); + if (value > div_mask(divider)) + value = div_mask(divider); if (divider->lock) spin_lock_irqsave(divider->lock, flags); val = readl(divider->reg); val &= ~(div_mask(divider) << divider->shift); - val |= div << divider->shift; + val |= value << divider->shift; writel(val, divider->reg); if (divider->lock) @@ -148,22 +234,11 @@ const struct clk_ops clk_divider_ops = { }; EXPORT_SYMBOL_GPL(clk_divider_ops); -/** - * clk_register_divider - register a divider clock with the clock framework - * @dev: device registering this clock - * @name: name of this clock - * @parent_name: name of clock's parent - * @flags: framework-specific flags - * @reg: register address to adjust divider - * @shift: number of bits to shift the bitfield - * @width: width of the bitfield - * @clk_divider_flags: divider-specific flags for this clock - * @lock: shared register lock for this clock - */ -struct clk *clk_register_divider(struct device *dev, const char *name, +static struct clk *_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, - u8 clk_divider_flags, spinlock_t *lock) + u8 clk_divider_flags, const struct clk_div_table *table, + spinlock_t *lock) { struct clk_divider *div; struct clk *clk; @@ -178,7 +253,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name, init.name = name; init.ops = &clk_divider_ops; - init.flags = flags; + init.flags = flags | CLK_IS_BASIC; init.parent_names = (parent_name ? &parent_name: NULL); init.num_parents = (parent_name ? 1 : 0); @@ -189,6 +264,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name, div->flags = clk_divider_flags; div->lock = lock; div->hw.init = &init; + div->table = table; /* register the clock */ clk = clk_register(dev, &div->hw); @@ -198,3 +274,48 @@ struct clk *clk_register_divider(struct device *dev, const char *name, return clk; } + +/** + * clk_register_divider - register a divider clock with the clock framework + * @dev: device registering this clock + * @name: name of this clock + * @parent_name: name of clock's parent + * @flags: framework-specific flags + * @reg: register address to adjust divider + * @shift: number of bits to shift the bitfield + * @width: width of the bitfield + * @clk_divider_flags: divider-specific flags for this clock + * @lock: shared register lock for this clock + */ +struct clk *clk_register_divider(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, spinlock_t *lock) +{ + return _register_divider(dev, name, parent_name, flags, reg, shift, + width, clk_divider_flags, NULL, lock); +} + +/** + * clk_register_divider_table - register a table based divider clock with + * the clock framework + * @dev: device registering this clock + * @name: name of this clock + * @parent_name: name of clock's parent + * @flags: framework-specific flags + * @reg: register address to adjust divider + * @shift: number of bits to shift the bitfield + * @width: width of the bitfield + * @clk_divider_flags: divider-specific flags for this clock + * @table: array of divider/value pairs ending with a div set to 0 + * @lock: shared register lock for this clock + */ +struct clk *clk_register_divider_table(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, const struct clk_div_table *table, + spinlock_t *lock) +{ + return _register_divider(dev, name, parent_name, flags, reg, shift, + width, clk_divider_flags, table, lock); +} diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c index c8c003e217ad..a4899855c0f6 100644 --- a/drivers/clk/clk-fixed-factor.c +++ b/drivers/clk/clk-fixed-factor.c @@ -82,7 +82,7 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name, init.name = name; init.ops = &clk_fixed_factor_ops; - init.flags = flags; + init.flags = flags | CLK_IS_BASIC; init.parent_names = &parent_name; init.num_parents = 1; diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c index cbd246229786..f5ec0eebd4d7 100644 --- a/drivers/clk/clk-fixed-rate.c +++ b/drivers/clk/clk-fixed-rate.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/io.h> #include <linux/err.h> +#include <linux/of.h> /* * DOC: basic fixed-rate clock that cannot gate @@ -63,7 +64,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, init.name = name; init.ops = &clk_fixed_rate_ops; - init.flags = flags; + init.flags = flags | CLK_IS_BASIC; init.parent_names = (parent_name ? &parent_name: NULL); init.num_parents = (parent_name ? 1 : 0); @@ -79,3 +80,25 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, return clk; } + +#ifdef CONFIG_OF +/** + * of_fixed_clk_setup() - Setup function for simple fixed rate clock + */ +void __init of_fixed_clk_setup(struct device_node *node) +{ + struct clk *clk; + const char *clk_name = node->name; + u32 rate; + + if (of_property_read_u32(node, "clock-frequency", &rate)) + return; + + of_property_read_string(node, "clock-output-names", &clk_name); + + clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate); + if (clk) + of_clk_add_provider(node, of_clk_src_simple_get, clk); +} +EXPORT_SYMBOL_GPL(of_fixed_clk_setup); +#endif diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index 578465e04be6..15114febfd92 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -130,7 +130,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name, init.name = name; init.ops = &clk_gate_ops; - init.flags = flags; + init.flags = flags | CLK_IS_BASIC; init.parent_names = (parent_name ? &parent_name: NULL); init.num_parents = (parent_name ? 1 : 0); diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c new file mode 100644 index 000000000000..52fecadf004a --- /dev/null +++ b/drivers/clk/clk-highbank.c @@ -0,0 +1,346 @@ +/* + * Copyright 2011-2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> + +extern void __iomem *sregs_base; + +#define HB_PLL_LOCK_500 0x20000000 +#define HB_PLL_LOCK 0x10000000 +#define HB_PLL_DIVF_SHIFT 20 +#define HB_PLL_DIVF_MASK 0x0ff00000 +#define HB_PLL_DIVQ_SHIFT 16 +#define HB_PLL_DIVQ_MASK 0x00070000 +#define HB_PLL_DIVR_SHIFT 8 +#define HB_PLL_DIVR_MASK 0x00001f00 +#define HB_PLL_RANGE_SHIFT 4 +#define HB_PLL_RANGE_MASK 0x00000070 +#define HB_PLL_BYPASS 0x00000008 +#define HB_PLL_RESET 0x00000004 +#define HB_PLL_EXT_BYPASS 0x00000002 +#define HB_PLL_EXT_ENA 0x00000001 + +#define HB_PLL_VCO_MIN_FREQ 2133000000 +#define HB_PLL_MAX_FREQ HB_PLL_VCO_MIN_FREQ +#define HB_PLL_MIN_FREQ (HB_PLL_VCO_MIN_FREQ / 64) + +#define HB_A9_BCLK_DIV_MASK 0x00000006 +#define HB_A9_BCLK_DIV_SHIFT 1 +#define HB_A9_PCLK_DIV 0x00000001 + +struct hb_clk { + struct clk_hw hw; + void __iomem *reg; + char *parent_name; +}; +#define to_hb_clk(p) container_of(p, struct hb_clk, hw) + +static int clk_pll_prepare(struct clk_hw *hwclk) + { + struct hb_clk *hbclk = to_hb_clk(hwclk); + u32 reg; + + reg = readl(hbclk->reg); + reg &= ~HB_PLL_RESET; + writel(reg, hbclk->reg); + + while ((readl(hbclk->reg) & HB_PLL_LOCK) == 0) + ; + while ((readl(hbclk->reg) & HB_PLL_LOCK_500) == 0) + ; + + return 0; +} + +static void clk_pll_unprepare(struct clk_hw *hwclk) +{ + struct hb_clk *hbclk = to_hb_clk(hwclk); + u32 reg; + + reg = readl(hbclk->reg); + reg |= HB_PLL_RESET; + writel(reg, hbclk->reg); +} + +static int clk_pll_enable(struct clk_hw *hwclk) +{ + struct hb_clk *hbclk = to_hb_clk(hwclk); + u32 reg; + + reg = readl(hbclk->reg); + reg |= HB_PLL_EXT_ENA; + writel(reg, hbclk->reg); + + return 0; +} + +static void clk_pll_disable(struct clk_hw *hwclk) +{ + struct hb_clk *hbclk = to_hb_clk(hwclk); + u32 reg; + + reg = readl(hbclk->reg); + reg &= ~HB_PLL_EXT_ENA; + writel(reg, hbclk->reg); +} + +static unsigned long clk_pll_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct hb_clk *hbclk = to_hb_clk(hwclk); + unsigned long divf, divq, vco_freq, reg; + + reg = readl(hbclk->reg); + if (reg & HB_PLL_EXT_BYPASS) + return parent_rate; + + divf = (reg & HB_PLL_DIVF_MASK) >> HB_PLL_DIVF_SHIFT; + divq = (reg & HB_PLL_DIVQ_MASK) >> HB_PLL_DIVQ_SHIFT; + vco_freq = parent_rate * (divf + 1); + + return vco_freq / (1 << divq); +} + +static void clk_pll_calc(unsigned long rate, unsigned long ref_freq, + u32 *pdivq, u32 *pdivf) +{ + u32 divq, divf; + unsigned long vco_freq; + + if (rate < HB_PLL_MIN_FREQ) + rate = HB_PLL_MIN_FREQ; + if (rate > HB_PLL_MAX_FREQ) + rate = HB_PLL_MAX_FREQ; + + for (divq = 1; divq <= 6; divq++) { + if ((rate * (1 << divq)) >= HB_PLL_VCO_MIN_FREQ) + break; + } + + vco_freq = rate * (1 << divq); + divf = (vco_freq + (ref_freq / 2)) / ref_freq; + divf--; + + *pdivq = divq; + *pdivf = divf; +} + +static long clk_pll_round_rate(struct clk_hw *hwclk, unsigned long rate, + unsigned long *parent_rate) +{ + u32 divq, divf; + unsigned long ref_freq = *parent_rate; + + clk_pll_calc(rate, ref_freq, &divq, &divf); + + return (ref_freq * (divf + 1)) / (1 << divq); +} + +static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate, + unsigned long parent_rate) +{ + struct hb_clk *hbclk = to_hb_clk(hwclk); + u32 divq, divf; + u32 reg; + + clk_pll_calc(rate, parent_rate, &divq, &divf); + + reg = readl(hbclk->reg); + if (divf != ((reg & HB_PLL_DIVF_MASK) >> HB_PLL_DIVF_SHIFT)) { + /* Need to re-lock PLL, so put it into bypass mode */ + reg |= HB_PLL_EXT_BYPASS; + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg); + + writel(reg | HB_PLL_RESET, hbclk->reg); + reg &= ~(HB_PLL_DIVF_MASK | HB_PLL_DIVQ_MASK); + reg |= (divf << HB_PLL_DIVF_SHIFT) | (divq << HB_PLL_DIVQ_SHIFT); + writel(reg | HB_PLL_RESET, hbclk->reg); + writel(reg, hbclk->reg); + + while ((readl(hbclk->reg) & HB_PLL_LOCK) == 0) + ; + while ((readl(hbclk->reg) & HB_PLL_LOCK_500) == 0) + ; + reg |= HB_PLL_EXT_ENA; + reg &= ~HB_PLL_EXT_BYPASS; + } else { + reg &= ~HB_PLL_DIVQ_MASK; + reg |= divq << HB_PLL_DIVQ_SHIFT; + } + writel(reg, hbclk->reg); + + return 0; +} + +static const struct clk_ops clk_pll_ops = { + .prepare = clk_pll_prepare, + .unprepare = clk_pll_unprepare, + .enable = clk_pll_enable, + .disable = clk_pll_disable, + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_round_rate, + .set_rate = clk_pll_set_rate, +}; + +static unsigned long clk_cpu_periphclk_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct hb_clk *hbclk = to_hb_clk(hwclk); + u32 div = (readl(hbclk->reg) & HB_A9_PCLK_DIV) ? 8 : 4; + return parent_rate / div; +} + +static const struct clk_ops a9periphclk_ops = { + .recalc_rate = clk_cpu_periphclk_recalc_rate, +}; + +static unsigned long clk_cpu_a9bclk_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct hb_clk *hbclk = to_hb_clk(hwclk); + u32 div = (readl(hbclk->reg) & HB_A9_BCLK_DIV_MASK) >> HB_A9_BCLK_DIV_SHIFT; + + return parent_rate / (div + 2); +} + +static const struct clk_ops a9bclk_ops = { + .recalc_rate = clk_cpu_a9bclk_recalc_rate, +}; + +static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct hb_clk *hbclk = to_hb_clk(hwclk); + u32 div; + + div = readl(hbclk->reg) & 0x1f; + div++; + div *= 2; + + return parent_rate / div; +} + +static long clk_periclk_round_rate(struct clk_hw *hwclk, unsigned long rate, + unsigned long *parent_rate) +{ + u32 div; + + div = *parent_rate / rate; + div++; + div &= ~0x1; + + return *parent_rate / div; +} + +static int clk_periclk_set_rate(struct clk_hw *hwclk, unsigned long rate, + unsigned long parent_rate) +{ + struct hb_clk *hbclk = to_hb_clk(hwclk); + u32 div; + + div = parent_rate / rate; + if (div & 0x1) + return -EINVAL; + + writel(div >> 1, hbclk->reg); + return 0; +} + +static const struct clk_ops periclk_ops = { + .recalc_rate = clk_periclk_recalc_rate, + .round_rate = clk_periclk_round_rate, + .set_rate = clk_periclk_set_rate, +}; + +static __init struct clk *hb_clk_init(struct device_node *node, const struct clk_ops *ops) +{ + u32 reg; + struct clk *clk; + struct hb_clk *hb_clk; + const char *clk_name = node->name; + const char *parent_name; + struct clk_init_data init; + int rc; + + rc = of_property_read_u32(node, "reg", ®); + if (WARN_ON(rc)) + return NULL; + + hb_clk = kzalloc(sizeof(*hb_clk), GFP_KERNEL); + if (WARN_ON(!hb_clk)) + return NULL; + + hb_clk->reg = sregs_base + reg; + + of_property_read_string(node, "clock-output-names", &clk_name); + + init.name = clk_name; + init.ops = ops; + init.flags = 0; + parent_name = of_clk_get_parent_name(node, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + hb_clk->hw.init = &init; + + clk = clk_register(NULL, &hb_clk->hw); + if (WARN_ON(IS_ERR(clk))) { + kfree(hb_clk); + return NULL; + } + rc = of_clk_add_provider(node, of_clk_src_simple_get, clk); + return clk; +} + +static void __init hb_pll_init(struct device_node *node) +{ + hb_clk_init(node, &clk_pll_ops); +} + +static void __init hb_a9periph_init(struct device_node *node) +{ + hb_clk_init(node, &a9periphclk_ops); +} + +static void __init hb_a9bus_init(struct device_node *node) +{ + struct clk *clk = hb_clk_init(node, &a9bclk_ops); + clk_prepare_enable(clk); +} + +static void __init hb_emmc_init(struct device_node *node) +{ + hb_clk_init(node, &periclk_ops); +} + +static const __initconst struct of_device_id clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "calxeda,hb-pll-clock", .data = hb_pll_init, }, + { .compatible = "calxeda,hb-a9periph-clock", .data = hb_a9periph_init, }, + { .compatible = "calxeda,hb-a9bus-clock", .data = hb_a9bus_init, }, + { .compatible = "calxeda,hb-emmc-clock", .data = hb_emmc_init, }, + {} +}; + +void __init highbank_clocks_init(void) +{ + of_clk_init(clk_match); +} diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index fd36a8ea73d9..508c032edce4 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -106,7 +106,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name, init.name = name; init.ops = &clk_mux_ops; - init.flags = flags; + init.flags = flags | CLK_IS_BASIC; init.parent_names = parent_names; init.num_parents = num_parents; diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c new file mode 100644 index 000000000000..a15f7928fb11 --- /dev/null +++ b/drivers/clk/clk-u300.c @@ -0,0 +1,746 @@ +/* + * U300 clock implementation + * Copyright (C) 2007-2012 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Author: Linus Walleij <linus.walleij@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk-provider.h> +#include <linux/spinlock.h> +#include <mach/syscon.h> + +/* + * The clocking hierarchy currently looks like this. + * NOTE: the idea is NOT to show how the clocks are routed on the chip! + * The ideas is to show dependencies, so a clock higher up in the + * hierarchy has to be on in order for another clock to be on. Now, + * both CPU and DMA can actually be on top of the hierarchy, and that + * is not modeled currently. Instead we have the backbone AMBA bus on + * top. This bus cannot be programmed in any way but conceptually it + * needs to be active for the bridges and devices to transport data. + * + * Please be aware that a few clocks are hw controlled, which mean that + * the hw itself can turn on/off or change the rate of the clock when + * needed! + * + * AMBA bus + * | + * +- CPU + * +- FSMC NANDIF NAND Flash interface + * +- SEMI Shared Memory interface + * +- ISP Image Signal Processor (U335 only) + * +- CDS (U335 only) + * +- DMA Direct Memory Access Controller + * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) + * +- APEX + * +- VIDEO_ENC AVE2/3 Video Encoder + * +- XGAM Graphics Accelerator Controller + * +- AHB + * | + * +- ahb:0 AHB Bridge + * | | + * | +- ahb:1 INTCON Interrupt controller + * | +- ahb:3 MSPRO Memory Stick Pro controller + * | +- ahb:4 EMIF External Memory interface + * | + * +- fast:0 FAST bridge + * | | + * | +- fast:1 MMCSD MMC/SD card reader controller + * | +- fast:2 I2S0 PCM I2S channel 0 controller + * | +- fast:3 I2S1 PCM I2S channel 1 controller + * | +- fast:4 I2C0 I2C channel 0 controller + * | +- fast:5 I2C1 I2C channel 1 controller + * | +- fast:6 SPI SPI controller + * | +- fast:7 UART1 Secondary UART (U335 only) + * | + * +- slow:0 SLOW bridge + * | + * +- slow:1 SYSCON (not possible to control) + * +- slow:2 WDOG Watchdog + * +- slow:3 UART0 primary UART + * +- slow:4 TIMER_APP Application timer - used in Linux + * +- slow:5 KEYPAD controller + * +- slow:6 GPIO controller + * +- slow:7 RTC controller + * +- slow:8 BT Bus Tracer (not used currently) + * +- slow:9 EH Event Handler (not used currently) + * +- slow:a TIMER_ACC Access style timer (not used currently) + * +- slow:b PPM (U335 only, what is that?) + */ + +/* Global syscon virtual base */ +static void __iomem *syscon_vbase; + +/** + * struct clk_syscon - U300 syscon clock + * @hw: corresponding clock hardware entry + * @hw_ctrld: whether this clock is hardware controlled (for refcount etc) + * and does not need any magic pokes to be enabled/disabled + * @reset: state holder, whether this block's reset line is asserted or not + * @res_reg: reset line enable/disable flag register + * @res_bit: bit for resetting or taking this consumer out of reset + * @en_reg: clock line enable/disable flag register + * @en_bit: bit for enabling/disabling this consumer clock line + * @clk_val: magic value to poke in the register to enable/disable + * this one clock + */ +struct clk_syscon { + struct clk_hw hw; + bool hw_ctrld; + bool reset; + void __iomem *res_reg; + u8 res_bit; + void __iomem *en_reg; + u8 en_bit; + u16 clk_val; +}; + +#define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw) + +static DEFINE_SPINLOCK(syscon_resetreg_lock); + +/* + * Reset control functions. We remember if a block has been + * taken out of reset and don't remove the reset assertion again + * and vice versa. Currently we only remove resets so the + * enablement function is defined out. + */ +static void syscon_block_reset_enable(struct clk_syscon *sclk) +{ + unsigned long iflags; + u16 val; + + /* Not all blocks support resetting */ + if (!sclk->res_reg) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(sclk->res_reg); + val |= BIT(sclk->res_bit); + writew(val, sclk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + sclk->reset = true; +} + +static void syscon_block_reset_disable(struct clk_syscon *sclk) +{ + unsigned long iflags; + u16 val; + + /* Not all blocks support resetting */ + if (!sclk->res_reg) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(sclk->res_reg); + val &= ~BIT(sclk->res_bit); + writew(val, sclk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + sclk->reset = false; +} + +static int syscon_clk_prepare(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* If the block is in reset, bring it out */ + if (sclk->reset) + syscon_block_reset_disable(sclk); + return 0; +} + +static void syscon_clk_unprepare(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* Please don't force the console into reset */ + if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN) + return; + /* When unpreparing, force block into reset */ + if (!sclk->reset) + syscon_block_reset_enable(sclk); +} + +static int syscon_clk_enable(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* Don't touch the hardware controlled clocks */ + if (sclk->hw_ctrld) + return 0; + /* These cannot be controlled */ + if (sclk->clk_val == 0xFFFFU) + return 0; + + writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER); + return 0; +} + +static void syscon_clk_disable(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* Don't touch the hardware controlled clocks */ + if (sclk->hw_ctrld) + return; + if (sclk->clk_val == 0xFFFFU) + return; + /* Please don't disable the console port */ + if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN) + return; + + writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR); +} + +static int syscon_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + u16 val; + + /* If no enable register defined, it's always-on */ + if (!sclk->en_reg) + return 1; + + val = readw(sclk->en_reg); + val &= BIT(sclk->en_bit); + + return val ? 1 : 0; +} + +static u16 syscon_get_perf(void) +{ + u16 val; + + val = readw(syscon_vbase + U300_SYSCON_CCR); + val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + return val; +} + +static unsigned long +syscon_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_syscon *sclk = to_syscon(hw); + u16 perf = syscon_get_perf(); + + switch(sclk->clk_val) { + case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN: + case U300_SYSCON_SBCER_I2C0_CLK_EN: + case U300_SYSCON_SBCER_I2C1_CLK_EN: + case U300_SYSCON_SBCER_MMC_CLK_EN: + case U300_SYSCON_SBCER_SPI_CLK_EN: + /* The FAST clocks have one progression */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + default: + return parent_rate; /* 26 MHz */ + } + case U300_SYSCON_SBCER_DMAC_CLK_EN: + case U300_SYSCON_SBCER_NANDIF_CLK_EN: + case U300_SYSCON_SBCER_XGAM_CLK_EN: + /* AMBA interconnect peripherals */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 6500000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 26000000; + default: + return parent_rate; /* 52 MHz */ + } + case U300_SYSCON_SBCER_SEMI_CLK_EN: + case U300_SYSCON_SBCER_EMIF_CLK_EN: + /* EMIF speeds */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + default: + return 104000000; + } + case U300_SYSCON_SBCER_CPU_CLK_EN: + /* And the fast CPU clock */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + return 104000000; + default: + return parent_rate; /* 208 MHz */ + } + default: + /* + * The SLOW clocks and default just inherit the rate of + * their parent (typically PLL13 13 MHz). + */ + return parent_rate; + } +} + +static long +syscon_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_syscon *sclk = to_syscon(hw); + + if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN) + return *prate; + /* We really only support setting the rate of the CPU clock */ + if (rate <= 13000000) + return 13000000; + if (rate <= 52000000) + return 52000000; + if (rate <= 104000000) + return 104000000; + return 208000000; +} + +static int syscon_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_syscon *sclk = to_syscon(hw); + u16 val; + + /* We only support setting the rate of the CPU clock */ + if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN) + return -EINVAL; + switch (rate) { + case 13000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; + break; + case 52000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; + break; + case 104000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; + break; + case 208000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; + break; + default: + return -EINVAL; + } + val |= readw(syscon_vbase + U300_SYSCON_CCR) & + ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; + writew(val, syscon_vbase + U300_SYSCON_CCR); + return 0; +} + +static const struct clk_ops syscon_clk_ops = { + .prepare = syscon_clk_prepare, + .unprepare = syscon_clk_unprepare, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .is_enabled = syscon_clk_is_enabled, + .recalc_rate = syscon_clk_recalc_rate, + .round_rate = syscon_clk_round_rate, + .set_rate = syscon_clk_set_rate, +}; + +static struct clk * __init +syscon_clk_register(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + bool hw_ctrld, + void __iomem *res_reg, u8 res_bit, + void __iomem *en_reg, u8 en_bit, + u16 clk_val) +{ + struct clk *clk; + struct clk_syscon *sclk; + struct clk_init_data init; + + sclk = kzalloc(sizeof(struct clk_syscon), GFP_KERNEL); + if (!sclk) { + pr_err("could not allocate syscon clock %s\n", + name); + return ERR_PTR(-ENOMEM); + } + init.name = name; + init.ops = &syscon_clk_ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + sclk->hw.init = &init; + sclk->hw_ctrld = hw_ctrld; + /* Assume the block is in reset at registration */ + sclk->reset = true; + sclk->res_reg = res_reg; + sclk->res_bit = res_bit; + sclk->en_reg = en_reg; + sclk->en_bit = en_bit; + sclk->clk_val = clk_val; + + clk = clk_register(dev, &sclk->hw); + if (IS_ERR(clk)) + kfree(sclk); + + return clk; +} + +/** + * struct clk_mclk - U300 MCLK clock (MMC/SD clock) + * @hw: corresponding clock hardware entry + * @is_mspro: if this is the memory stick clock rather than MMC/SD + */ +struct clk_mclk { + struct clk_hw hw; + bool is_mspro; +}; + +#define to_mclk(_hw) container_of(_hw, struct clk_mclk, hw) + +static int mclk_clk_prepare(struct clk_hw *hw) +{ + struct clk_mclk *mclk = to_mclk(hw); + u16 val; + + /* The MMC and MSPRO clocks need some special set-up */ + if (!mclk->is_mspro) { + /* Set default MMC clock divisor to 18.9 MHz */ + writew(0x0054U, syscon_vbase + U300_SYSCON_MMF0R); + val = readw(syscon_vbase + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Disable MSPRO frequency */ + val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, syscon_vbase + U300_SYSCON_MMCR); + } else { + val = readw(syscon_vbase + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Enable MSPRO frequency */ + val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, syscon_vbase + U300_SYSCON_MMCR); + } + + return 0; +} + +static unsigned long +mclk_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u16 perf = syscon_get_perf(); + + switch (perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + /* + * Here, the 208 MHz PLL gets shut down and the always + * on 13 MHz PLL used for RTC etc kicks into use + * instead. + */ + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + { + /* + * This clock is under program control. The register is + * divided in two nybbles, bit 7-4 gives cycles-1 to count + * high, bit 3-0 gives cycles-1 to count low. Distribute + * these with no more than 1 cycle difference between + * low and high and add low and high to get the actual + * divisor. The base PLL is 208 MHz. Writing 0x00 will + * divide by 1 and 1 so the highest frequency possible + * is 104 MHz. + * + * e.g. 0x54 => + * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz + */ + u16 val = readw(syscon_vbase + U300_SYSCON_MMF0R) & + U300_SYSCON_MMF0R_MASK; + switch (val) { + case 0x0054: + return 18900000; + case 0x0044: + return 20800000; + case 0x0043: + return 23100000; + case 0x0033: + return 26000000; + case 0x0032: + return 29700000; + case 0x0022: + return 34700000; + case 0x0021: + return 41600000; + case 0x0011: + return 52000000; + case 0x0000: + return 104000000; + default: + break; + } + } + default: + break; + } + return parent_rate; +} + +static long +mclk_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + if (rate <= 18900000) + return 18900000; + if (rate <= 20800000) + return 20800000; + if (rate <= 23100000) + return 23100000; + if (rate <= 26000000) + return 26000000; + if (rate <= 29700000) + return 29700000; + if (rate <= 34700000) + return 34700000; + if (rate <= 41600000) + return 41600000; + /* Highest rate */ + return 52000000; +} + +static int mclk_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + u16 val; + u16 reg; + + switch (rate) { + case 18900000: + val = 0x0054; + break; + case 20800000: + val = 0x0044; + break; + case 23100000: + val = 0x0043; + break; + case 26000000: + val = 0x0033; + break; + case 29700000: + val = 0x0032; + break; + case 34700000: + val = 0x0022; + break; + case 41600000: + val = 0x0021; + break; + case 52000000: + val = 0x0011; + break; + case 104000000: + val = 0x0000; + break; + default: + return -EINVAL; + } + + reg = readw(syscon_vbase + U300_SYSCON_MMF0R) & + ~U300_SYSCON_MMF0R_MASK; + writew(reg | val, syscon_vbase + U300_SYSCON_MMF0R); + return 0; +} + +static const struct clk_ops mclk_ops = { + .prepare = mclk_clk_prepare, + .recalc_rate = mclk_clk_recalc_rate, + .round_rate = mclk_clk_round_rate, + .set_rate = mclk_clk_set_rate, +}; + +static struct clk * __init +mclk_clk_register(struct device *dev, const char *name, + const char *parent_name, bool is_mspro) +{ + struct clk *clk; + struct clk_mclk *mclk; + struct clk_init_data init; + + mclk = kzalloc(sizeof(struct clk_mclk), GFP_KERNEL); + if (!mclk) { + pr_err("could not allocate MMC/SD clock %s\n", + name); + return ERR_PTR(-ENOMEM); + } + init.name = "mclk"; + init.ops = &mclk_ops; + init.flags = 0; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + mclk->hw.init = &init; + mclk->is_mspro = is_mspro; + + clk = clk_register(dev, &mclk->hw); + if (IS_ERR(clk)) + kfree(mclk); + + return clk; +} + +void __init u300_clk_init(void __iomem *base) +{ + u16 val; + struct clk *clk; + + syscon_vbase = base; + + /* Set system to run at PLL208, max performance, a known state. */ + val = readw(syscon_vbase + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + writew(val, syscon_vbase + U300_SYSCON_CCR); + /* Wait for the PLL208 to lock if not locked in yet */ + while (!(readw(syscon_vbase + U300_SYSCON_CSR) & + U300_SYSCON_CSR_PLL208_LOCK_IND)); + + /* Power management enable */ + val = readw(syscon_vbase + U300_SYSCON_PMCR); + val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; + writew(val, syscon_vbase + U300_SYSCON_PMCR); + + /* These are always available (RTC and PLL13) */ + clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL, + CLK_IS_ROOT, 32768); + /* The watchdog sits directly on the 32 kHz clock */ + clk_register_clkdev(clk, NULL, "coh901327_wdog"); + clk = clk_register_fixed_rate(NULL, "pll13", NULL, + CLK_IS_ROOT, 13000000); + + /* These derive from PLL208 */ + clk = clk_register_fixed_rate(NULL, "pll208", NULL, + CLK_IS_ROOT, 208000000); + clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208", + 0, 1, 1); + clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208", + 0, 1, 2); + clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208", + 0, 1, 4); + /* The 52 MHz is divided down to 26 MHz */ + clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk", + 0, 1, 2); + + /* Directly on the AMBA interconnect */ + clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 3, + syscon_vbase + U300_SYSCON_CERR, 3, + U300_SYSCON_SBCER_CPU_CLK_EN); + clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 4, + syscon_vbase + U300_SYSCON_CERR, 4, + U300_SYSCON_SBCER_DMAC_CLK_EN); + clk_register_clkdev(clk, NULL, "dma"); + clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 6, + syscon_vbase + U300_SYSCON_CERR, 6, + U300_SYSCON_SBCER_NANDIF_CLK_EN); + clk_register_clkdev(clk, NULL, "fsmc-nand"); + clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 8, + syscon_vbase + U300_SYSCON_CERR, 8, + U300_SYSCON_SBCER_XGAM_CLK_EN); + clk_register_clkdev(clk, NULL, "xgam"); + clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 9, + syscon_vbase + U300_SYSCON_CERR, 9, + U300_SYSCON_SBCER_SEMI_CLK_EN); + clk_register_clkdev(clk, NULL, "semi"); + + /* AHB bridge clocks */ + clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 10, + syscon_vbase + U300_SYSCON_CERR, 10, + U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN); + clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 12, + syscon_vbase + U300_SYSCON_CERR, 12, + /* Cannot be enabled, just taken out of reset */ + 0xFFFFU); + clk_register_clkdev(clk, NULL, "intcon"); + clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 5, + syscon_vbase + U300_SYSCON_CERR, 5, + U300_SYSCON_SBCER_EMIF_CLK_EN); + clk_register_clkdev(clk, NULL, "pl172"); + + /* FAST bridge clocks */ + clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true, + syscon_vbase + U300_SYSCON_RFR, 0, + syscon_vbase + U300_SYSCON_CEFR, 0, + U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN); + clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 1, + syscon_vbase + U300_SYSCON_CEFR, 1, + U300_SYSCON_SBCER_I2C0_CLK_EN); + clk_register_clkdev(clk, NULL, "stu300.0"); + clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 2, + syscon_vbase + U300_SYSCON_CEFR, 2, + U300_SYSCON_SBCER_I2C1_CLK_EN); + clk_register_clkdev(clk, NULL, "stu300.1"); + clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 5, + syscon_vbase + U300_SYSCON_CEFR, 5, + U300_SYSCON_SBCER_MMC_CLK_EN); + clk_register_clkdev(clk, "apb_pclk", "mmci"); + clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 6, + syscon_vbase + U300_SYSCON_CEFR, 6, + U300_SYSCON_SBCER_SPI_CLK_EN); + /* The SPI has no external clock for the outward bus, uses the pclk */ + clk_register_clkdev(clk, NULL, "pl022"); + clk_register_clkdev(clk, "apb_pclk", "pl022"); + + /* SLOW bridge clocks */ + clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true, + syscon_vbase + U300_SYSCON_RSR, 0, + syscon_vbase + U300_SYSCON_CESR, 0, + U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN); + clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 1, + syscon_vbase + U300_SYSCON_CESR, 1, + U300_SYSCON_SBCER_UART_CLK_EN); + /* Same clock is used for APB and outward bus */ + clk_register_clkdev(clk, NULL, "uart0"); + clk_register_clkdev(clk, "apb_pclk", "uart0"); + clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 4, + syscon_vbase + U300_SYSCON_CESR, 4, + U300_SYSCON_SBCER_GPIO_CLK_EN); + clk_register_clkdev(clk, NULL, "u300-gpio"); + clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 5, + syscon_vbase + U300_SYSCON_CESR, 6, + U300_SYSCON_SBCER_KEYPAD_CLK_EN); + clk_register_clkdev(clk, NULL, "coh901461-keypad"); + clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true, + syscon_vbase + U300_SYSCON_RSR, 6, + /* No clock enable register bit */ + NULL, 0, 0xFFFFU); + clk_register_clkdev(clk, NULL, "rtc-coh901331"); + clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 7, + syscon_vbase + U300_SYSCON_CESR, 7, + U300_SYSCON_SBCER_APP_TMR_CLK_EN); + clk_register_clkdev(clk, NULL, "apptimer"); + clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 8, + syscon_vbase + U300_SYSCON_CESR, 8, + U300_SYSCON_SBCER_ACC_TMR_CLK_EN); + clk_register_clkdev(clk, NULL, "timer"); + + /* Then this special MMC/SD clock */ + clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false); + clk_register_clkdev(clk, NULL, "mmci"); +} diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c new file mode 100644 index 000000000000..e7b7765e85f3 --- /dev/null +++ b/drivers/clk/clk-wm831x.c @@ -0,0 +1,428 @@ +/* + * WM831x clock control + * + * Copyright 2011-2 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/mfd/wm831x/core.h> + +struct wm831x_clk { + struct wm831x *wm831x; + struct clk_hw xtal_hw; + struct clk_hw fll_hw; + struct clk_hw clkout_hw; + struct clk *xtal; + struct clk *fll; + struct clk *clkout; + bool xtal_ena; +}; + +static int wm831x_xtal_is_enabled(struct clk_hw *hw) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + xtal_hw); + + return clkdata->xtal_ena; +} + +static unsigned long wm831x_xtal_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + xtal_hw); + + if (clkdata->xtal_ena) + return 32768; + else + return 0; +} + +static const struct clk_ops wm831x_xtal_ops = { + .is_enabled = wm831x_xtal_is_enabled, + .recalc_rate = wm831x_xtal_recalc_rate, +}; + +static struct clk_init_data wm831x_xtal_init = { + .name = "xtal", + .ops = &wm831x_xtal_ops, + .flags = CLK_IS_ROOT, +}; + +static const unsigned long wm831x_fll_auto_rates[] = { + 2048000, + 11289600, + 12000000, + 12288000, + 19200000, + 22579600, + 24000000, + 24576000, +}; + +static int wm831x_fll_is_enabled(struct clk_hw *hw) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + fll_hw); + struct wm831x *wm831x = clkdata->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_1); + if (ret < 0) { + dev_err(wm831x->dev, "Unable to read FLL_CONTROL_1: %d\n", + ret); + return true; + } + + return (ret & WM831X_FLL_ENA) != 0; +} + +static int wm831x_fll_prepare(struct clk_hw *hw) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + fll_hw); + struct wm831x *wm831x = clkdata->wm831x; + int ret; + + ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2, + WM831X_FLL_ENA, WM831X_FLL_ENA); + if (ret != 0) + dev_crit(wm831x->dev, "Failed to enable FLL: %d\n", ret); + + usleep_range(2000, 2000); + + return ret; +} + +static void wm831x_fll_unprepare(struct clk_hw *hw) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + fll_hw); + struct wm831x *wm831x = clkdata->wm831x; + int ret; + + ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2, WM831X_FLL_ENA, 0); + if (ret != 0) + dev_crit(wm831x->dev, "Failed to disaable FLL: %d\n", ret); +} + +static unsigned long wm831x_fll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + fll_hw); + struct wm831x *wm831x = clkdata->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2); + if (ret < 0) { + dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n", + ret); + return 0; + } + + if (ret & WM831X_FLL_AUTO) + return wm831x_fll_auto_rates[ret & WM831X_FLL_AUTO_FREQ_MASK]; + + dev_err(wm831x->dev, "FLL only supported in AUTO mode\n"); + + return 0; +} + +static long wm831x_fll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *unused) +{ + int best = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++) + if (abs(wm831x_fll_auto_rates[i] - rate) < + abs(wm831x_fll_auto_rates[best] - rate)) + best = i; + + return wm831x_fll_auto_rates[best]; +} + +static int wm831x_fll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + fll_hw); + struct wm831x *wm831x = clkdata->wm831x; + int i; + + for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++) + if (wm831x_fll_auto_rates[i] == rate) + break; + if (i == ARRAY_SIZE(wm831x_fll_auto_rates)) + return -EINVAL; + + if (wm831x_fll_is_enabled(hw)) + return -EPERM; + + return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_2, + WM831X_FLL_AUTO_FREQ_MASK, i); +} + +static const char *wm831x_fll_parents[] = { + "xtal", + "clkin", +}; + +static u8 wm831x_fll_get_parent(struct clk_hw *hw) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + fll_hw); + struct wm831x *wm831x = clkdata->wm831x; + int ret; + + /* AUTO mode is always clocked from the crystal */ + ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2); + if (ret < 0) { + dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n", + ret); + return 0; + } + + if (ret & WM831X_FLL_AUTO) + return 0; + + ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_5); + if (ret < 0) { + dev_err(wm831x->dev, "Unable to read FLL_CONTROL_5: %d\n", + ret); + return 0; + } + + switch (ret & WM831X_FLL_CLK_SRC_MASK) { + case 0: + return 0; + case 1: + return 1; + default: + dev_err(wm831x->dev, "Unsupported FLL clock source %d\n", + ret & WM831X_FLL_CLK_SRC_MASK); + return 0; + } +} + +static const struct clk_ops wm831x_fll_ops = { + .is_enabled = wm831x_fll_is_enabled, + .prepare = wm831x_fll_prepare, + .unprepare = wm831x_fll_unprepare, + .round_rate = wm831x_fll_round_rate, + .recalc_rate = wm831x_fll_recalc_rate, + .set_rate = wm831x_fll_set_rate, + .get_parent = wm831x_fll_get_parent, +}; + +static struct clk_init_data wm831x_fll_init = { + .name = "fll", + .ops = &wm831x_fll_ops, + .parent_names = wm831x_fll_parents, + .num_parents = ARRAY_SIZE(wm831x_fll_parents), + .flags = CLK_SET_RATE_GATE, +}; + +static int wm831x_clkout_is_enabled(struct clk_hw *hw) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + clkout_hw); + struct wm831x *wm831x = clkdata->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1); + if (ret < 0) { + dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n", + ret); + return true; + } + + return (ret & WM831X_CLKOUT_ENA) != 0; +} + +static int wm831x_clkout_prepare(struct clk_hw *hw) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + clkout_hw); + struct wm831x *wm831x = clkdata->wm831x; + int ret; + + ret = wm831x_reg_unlock(wm831x); + if (ret != 0) { + dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret); + return ret; + } + + ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1, + WM831X_CLKOUT_ENA, WM831X_CLKOUT_ENA); + if (ret != 0) + dev_crit(wm831x->dev, "Failed to enable CLKOUT: %d\n", ret); + + wm831x_reg_lock(wm831x); + + return ret; +} + +static void wm831x_clkout_unprepare(struct clk_hw *hw) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + clkout_hw); + struct wm831x *wm831x = clkdata->wm831x; + int ret; + + ret = wm831x_reg_unlock(wm831x); + if (ret != 0) { + dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret); + return; + } + + ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1, + WM831X_CLKOUT_ENA, 0); + if (ret != 0) + dev_crit(wm831x->dev, "Failed to disable CLKOUT: %d\n", ret); + + wm831x_reg_lock(wm831x); +} + +static const char *wm831x_clkout_parents[] = { + "xtal", + "fll", +}; + +static u8 wm831x_clkout_get_parent(struct clk_hw *hw) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + clkout_hw); + struct wm831x *wm831x = clkdata->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1); + if (ret < 0) { + dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n", + ret); + return 0; + } + + if (ret & WM831X_CLKOUT_SRC) + return 0; + else + return 1; +} + +static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent) +{ + struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, + clkout_hw); + struct wm831x *wm831x = clkdata->wm831x; + + return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1, + WM831X_CLKOUT_SRC, + parent << WM831X_CLKOUT_SRC_SHIFT); +} + +static const struct clk_ops wm831x_clkout_ops = { + .is_enabled = wm831x_clkout_is_enabled, + .prepare = wm831x_clkout_prepare, + .unprepare = wm831x_clkout_unprepare, + .get_parent = wm831x_clkout_get_parent, + .set_parent = wm831x_clkout_set_parent, +}; + +static struct clk_init_data wm831x_clkout_init = { + .name = "clkout", + .ops = &wm831x_clkout_ops, + .parent_names = wm831x_clkout_parents, + .num_parents = ARRAY_SIZE(wm831x_clkout_parents), + .flags = CLK_SET_RATE_PARENT, +}; + +static __devinit int wm831x_clk_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_clk *clkdata; + int ret; + + clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL); + if (!clkdata) + return -ENOMEM; + + /* XTAL_ENA can only be set via OTP/InstantConfig so just read once */ + ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2); + if (ret < 0) { + dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n", + ret); + return ret; + } + clkdata->xtal_ena = ret & WM831X_XTAL_ENA; + + clkdata->xtal_hw.init = &wm831x_xtal_init; + clkdata->xtal = clk_register(&pdev->dev, &clkdata->xtal_hw); + if (!clkdata->xtal) + return -EINVAL; + + clkdata->fll_hw.init = &wm831x_fll_init; + clkdata->fll = clk_register(&pdev->dev, &clkdata->fll_hw); + if (!clkdata->fll) { + ret = -EINVAL; + goto err_xtal; + } + + clkdata->clkout_hw.init = &wm831x_clkout_init; + clkdata->clkout = clk_register(&pdev->dev, &clkdata->clkout_hw); + if (!clkdata->clkout) { + ret = -EINVAL; + goto err_fll; + } + + dev_set_drvdata(&pdev->dev, clkdata); + + return 0; + +err_fll: + clk_unregister(clkdata->fll); +err_xtal: + clk_unregister(clkdata->xtal); + return ret; +} + +static int __devexit wm831x_clk_remove(struct platform_device *pdev) +{ + struct wm831x_clk *clkdata = dev_get_drvdata(&pdev->dev); + + clk_unregister(clkdata->clkout); + clk_unregister(clkdata->fll); + clk_unregister(clkdata->xtal); + + return 0; +} + +static struct platform_driver wm831x_clk_driver = { + .probe = wm831x_clk_probe, + .remove = __devexit_p(wm831x_clk_remove), + .driver = { + .name = "wm831x-clk", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(wm831x_clk_driver); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM831x clock driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-clk"); diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 9a1eb0cfa95f..c87fdd710560 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -16,6 +16,7 @@ #include <linux/err.h> #include <linux/list.h> #include <linux/slab.h> +#include <linux/of.h> static DEFINE_SPINLOCK(enable_lock); static DEFINE_MUTEX(prepare_lock); @@ -1235,8 +1236,8 @@ int __clk_init(struct device *dev, struct clk *clk) * If clk->parents is not NULL we skip this entire block. This allows * for clock drivers to statically initialize clk->parents. */ - if (clk->num_parents && !clk->parents) { - clk->parents = kmalloc((sizeof(struct clk*) * clk->num_parents), + if (clk->num_parents > 1 && !clk->parents) { + clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents), GFP_KERNEL); /* * __clk_lookup returns NULL for parents that have not been @@ -1550,3 +1551,142 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) return ret; } EXPORT_SYMBOL_GPL(clk_notifier_unregister); + +#ifdef CONFIG_OF +/** + * struct of_clk_provider - Clock provider registration structure + * @link: Entry in global list of clock providers + * @node: Pointer to device tree node of clock provider + * @get: Get clock callback. Returns NULL or a struct clk for the + * given clock specifier + * @data: context pointer to be passed into @get callback + */ +struct of_clk_provider { + struct list_head link; + + struct device_node *node; + struct clk *(*get)(struct of_phandle_args *clkspec, void *data); + void *data; +}; + +static LIST_HEAD(of_clk_providers); +static DEFINE_MUTEX(of_clk_lock); + +struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, + void *data) +{ + return data; +} +EXPORT_SYMBOL_GPL(of_clk_src_simple_get); + +/** + * of_clk_add_provider() - Register a clock provider for a node + * @np: Device node pointer associated with clock provider + * @clk_src_get: callback for decoding clock + * @data: context pointer for @clk_src_get callback. + */ +int of_clk_add_provider(struct device_node *np, + struct clk *(*clk_src_get)(struct of_phandle_args *clkspec, + void *data), + void *data) +{ + struct of_clk_provider *cp; + + cp = kzalloc(sizeof(struct of_clk_provider), GFP_KERNEL); + if (!cp) + return -ENOMEM; + + cp->node = of_node_get(np); + cp->data = data; + cp->get = clk_src_get; + + mutex_lock(&of_clk_lock); + list_add(&cp->link, &of_clk_providers); + mutex_unlock(&of_clk_lock); + pr_debug("Added clock from %s\n", np->full_name); + + return 0; +} +EXPORT_SYMBOL_GPL(of_clk_add_provider); + +/** + * of_clk_del_provider() - Remove a previously registered clock provider + * @np: Device node pointer associated with clock provider + */ +void of_clk_del_provider(struct device_node *np) +{ + struct of_clk_provider *cp; + + mutex_lock(&of_clk_lock); + list_for_each_entry(cp, &of_clk_providers, link) { + if (cp->node == np) { + list_del(&cp->link); + of_node_put(cp->node); + kfree(cp); + break; + } + } + mutex_unlock(&of_clk_lock); +} +EXPORT_SYMBOL_GPL(of_clk_del_provider); + +struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec) +{ + struct of_clk_provider *provider; + struct clk *clk = ERR_PTR(-ENOENT); + + /* Check if we have such a provider in our array */ + mutex_lock(&of_clk_lock); + list_for_each_entry(provider, &of_clk_providers, link) { + if (provider->node == clkspec->np) + clk = provider->get(clkspec, provider->data); + if (!IS_ERR(clk)) + break; + } + mutex_unlock(&of_clk_lock); + + return clk; +} + +const char *of_clk_get_parent_name(struct device_node *np, int index) +{ + struct of_phandle_args clkspec; + const char *clk_name; + int rc; + + if (index < 0) + return NULL; + + rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index, + &clkspec); + if (rc) + return NULL; + + if (of_property_read_string_index(clkspec.np, "clock-output-names", + clkspec.args_count ? clkspec.args[0] : 0, + &clk_name) < 0) + clk_name = clkspec.np->name; + + of_node_put(clkspec.np); + return clk_name; +} +EXPORT_SYMBOL_GPL(of_clk_get_parent_name); + +/** + * of_clk_init() - Scan and init clock providers from the DT + * @matches: array of compatible values and init functions for providers. + * + * This function scans the device tree for matching clock providers and + * calls their initialization functions + */ +void __init of_clk_init(const struct of_device_id *matches) +{ + struct device_node *np; + + for_each_matching_node(np, matches) { + const struct of_device_id *match = of_match_node(matches, np); + of_clk_init_cb_t clk_init_cb = match->data; + clk_init_cb(np); + } +} +#endif diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index c535cf8c5770..d423c9bdd71a 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -19,10 +19,80 @@ #include <linux/mutex.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/of.h> static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); +#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) +struct clk *of_clk_get(struct device_node *np, int index) +{ + struct of_phandle_args clkspec; + struct clk *clk; + int rc; + + if (index < 0) + return ERR_PTR(-EINVAL); + + rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index, + &clkspec); + if (rc) + return ERR_PTR(rc); + + clk = of_clk_get_from_provider(&clkspec); + of_node_put(clkspec.np); + return clk; +} +EXPORT_SYMBOL(of_clk_get); + +/** + * of_clk_get_by_name() - Parse and lookup a clock referenced by a device node + * @np: pointer to clock consumer node + * @name: name of consumer's clock input, or NULL for the first clock reference + * + * This function parses the clocks and clock-names properties, + * and uses them to look up the struct clk from the registered list of clock + * providers. + */ +struct clk *of_clk_get_by_name(struct device_node *np, const char *name) +{ + struct clk *clk = ERR_PTR(-ENOENT); + + /* Walk up the tree of devices looking for a clock that matches */ + while (np) { + int index = 0; + + /* + * For named clocks, first look up the name in the + * "clock-names" property. If it cannot be found, then + * index will be an error code, and of_clk_get() will fail. + */ + if (name) + index = of_property_match_string(np, "clock-names", name); + clk = of_clk_get(np, index); + if (!IS_ERR(clk)) + break; + else if (name && index >= 0) { + pr_err("ERROR: could not get clock %s:%s(%i)\n", + np->full_name, name ? name : "", index); + return clk; + } + + /* + * No matching clock found on this node. If the parent node + * has a "clock-ranges" property, then we can try one of its + * clocks. + */ + np = np->parent; + if (np && !of_get_property(np, "clock-ranges", NULL)) + break; + } + + return clk; +} +EXPORT_SYMBOL(of_clk_get_by_name); +#endif + /* * Find the correct struct clk for the device and connection ID. * We do slightly fuzzy matching here: @@ -83,6 +153,13 @@ EXPORT_SYMBOL(clk_get_sys); struct clk *clk_get(struct device *dev, const char *con_id) { const char *dev_id = dev ? dev_name(dev) : NULL; + struct clk *clk; + + if (dev) { + clk = of_clk_get_by_name(dev->of_node, con_id); + if (!IS_ERR(clk) && __clk_get(clk)) + return clk; + } return clk_get_sys(dev_id, con_id); } diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index db2391c054ee..844043ad0fe4 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -106,7 +106,7 @@ static struct clk_lookup lcdif_lookups[] = { static struct clk_lookup gpmi_lookups[] = { { .dev_id = "imx23-gpmi-nand", }, - { .dev_id = "8000c000.gpmi", }, + { .dev_id = "8000c000.gpmi-nand", }, }; static const char *sel_pll[] __initconst = { "pll", "ref_xtal", }; @@ -189,6 +189,7 @@ int __init mx23_clocks_init(void) } clk_register_clkdev(clks[clk32k], NULL, "timrot"); + clk_register_clkdev(clks[pwm], NULL, "80064000.pwm"); clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups)); clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups)); clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups)); diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index 7fad6c8c13d2..e3aab67b3eb7 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -112,11 +112,11 @@ static void __init clk_misc_init(void) /* * 480 MHz seems too high to be ssp clock source directly, - * so set frac0 to get a 288 MHz ref_io0. + * so set frac0 to get a 288 MHz ref_io0 and ref_io1. */ val = readl_relaxed(FRAC0); - val &= ~(0x3f << BP_FRAC0_IO0FRAC); - val |= 30 << BP_FRAC0_IO0FRAC; + val &= ~((0x3f << BP_FRAC0_IO0FRAC) | (0x3f << BP_FRAC0_IO1FRAC)); + val |= (30 << BP_FRAC0_IO0FRAC) | (30 << BP_FRAC0_IO1FRAC); writel_relaxed(val, FRAC0); } @@ -174,7 +174,7 @@ static struct clk_lookup lcdif_lookups[] = { static struct clk_lookup gpmi_lookups[] = { { .dev_id = "imx28-gpmi-nand", }, - { .dev_id = "8000c000.gpmi", }, + { .dev_id = "8000c000.gpmi-nand", }, }; static struct clk_lookup fec_lookups[] = { @@ -314,6 +314,7 @@ int __init mx28_clocks_init(void) clk_register_clkdev(clks[clk32k], NULL, "timrot"); clk_register_clkdev(clks[enet_out], NULL, "enet_out"); + clk_register_clkdev(clks[pwm], NULL, "80064000.pwm"); clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups)); clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups)); clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups)); @@ -328,6 +329,10 @@ int __init mx28_clocks_init(void) clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups)); clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups)); clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups)); + clk_register_clkdev(clks[usb0_pwr], NULL, "8007c000.usbphy"); + clk_register_clkdev(clks[usb1_pwr], NULL, "8007e000.usbphy"); + clk_register_clkdev(clks[usb0], NULL, "80080000.usb"); + clk_register_clkdev(clks[usb1], NULL, "80090000.usb"); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile new file mode 100644 index 000000000000..50cf6a2ee693 --- /dev/null +++ b/drivers/clk/versatile/Makefile @@ -0,0 +1,3 @@ +# Makefile for Versatile-specific clocks +obj-$(CONFIG_ICST) += clk-icst.o +obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c new file mode 100644 index 000000000000..f555b50a5fa5 --- /dev/null +++ b/drivers/clk/versatile/clk-icst.c @@ -0,0 +1,100 @@ +/* + * Driver for the ICST307 VCO clock found in the ARM Reference designs. + * We wrap the custom interface from <asm/hardware/icst.h> into the generic + * clock framework. + * + * TODO: when all ARM reference designs are migrated to generic clocks, the + * ICST clock code from the ARM tree should probably be merged into this + * file. + */ +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/clk-provider.h> + +#include "clk-icst.h" + +/** + * struct clk_icst - ICST VCO clock wrapper + * @hw: corresponding clock hardware entry + * @params: parameters for this ICST instance + * @rate: current rate + * @setvco: function to commit ICST settings to hardware + */ +struct clk_icst { + struct clk_hw hw; + const struct icst_params *params; + unsigned long rate; + struct icst_vco (*getvco)(void); + void (*setvco)(struct icst_vco); +}; + +#define to_icst(_hw) container_of(_hw, struct clk_icst, hw) + +static unsigned long icst_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_icst *icst = to_icst(hw); + struct icst_vco vco; + + vco = icst->getvco(); + icst->rate = icst_hz(icst->params, vco); + return icst->rate; +} + +static long icst_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_icst *icst = to_icst(hw); + struct icst_vco vco; + + vco = icst_hz_to_vco(icst->params, rate); + return icst_hz(icst->params, vco); +} + +static int icst_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_icst *icst = to_icst(hw); + struct icst_vco vco; + + vco = icst_hz_to_vco(icst->params, rate); + icst->rate = icst_hz(icst->params, vco); + icst->setvco(vco); + return 0; +} + +static const struct clk_ops icst_ops = { + .recalc_rate = icst_recalc_rate, + .round_rate = icst_round_rate, + .set_rate = icst_set_rate, +}; + +struct clk * __init icst_clk_register(struct device *dev, + const struct clk_icst_desc *desc) +{ + struct clk *clk; + struct clk_icst *icst; + struct clk_init_data init; + + icst = kzalloc(sizeof(struct clk_icst), GFP_KERNEL); + if (!icst) { + pr_err("could not allocate ICST clock!\n"); + return ERR_PTR(-ENOMEM); + } + init.name = "icst"; + init.ops = &icst_ops; + init.flags = CLK_IS_ROOT; + init.parent_names = NULL; + init.num_parents = 0; + icst->hw.init = &init; + icst->params = desc->params; + icst->getvco = desc->getvco; + icst->setvco = desc->setvco; + + clk = clk_register(dev, &icst->hw); + if (IS_ERR(clk)) + kfree(icst); + + return clk; +} diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h new file mode 100644 index 000000000000..71b4c56c1410 --- /dev/null +++ b/drivers/clk/versatile/clk-icst.h @@ -0,0 +1,10 @@ +#include <asm/hardware/icst.h> + +struct clk_icst_desc { + const struct icst_params *params; + struct icst_vco (*getvco)(void); + void (*setvco)(struct icst_vco); +}; + +struct clk *icst_clk_register(struct device *dev, + const struct clk_icst_desc *desc); diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c new file mode 100644 index 000000000000..a5053921bf7f --- /dev/null +++ b/drivers/clk/versatile/clk-integrator.c @@ -0,0 +1,111 @@ +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk-provider.h> + +#include <mach/hardware.h> +#include <mach/platform.h> + +#include "clk-icst.h" + +/* + * Implementation of the ARM Integrator/AP and Integrator/CP clock tree. + * Inspired by portions of: + * plat-versatile/clock.c and plat-versatile/include/plat/clock.h + */ +#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) +#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c) + +/** + * cp_auxvco_get() - get ICST VCO settings for the Integrator/CP + * @vco: ICST VCO parameters to update with hardware status + */ +static struct icst_vco cp_auxvco_get(void) +{ + u32 val; + struct icst_vco vco; + + val = readl(CM_AUXOSC); + vco.v = val & 0x1ff; + vco.r = (val >> 9) & 0x7f; + vco.s = (val >> 16) & 03; + return vco; +} + +/** + * cp_auxvco_set() - commit changes to Integrator/CP ICST VCO + * @vco: ICST VCO parameters to commit + */ +static void cp_auxvco_set(struct icst_vco vco) +{ + u32 val; + + val = readl(CM_AUXOSC) & ~0x7ffff; + val |= vco.v | (vco.r << 9) | (vco.s << 16); + + /* This magic unlocks the CM VCO so it can be controlled */ + writel(0xa05f, CM_LOCK); + writel(val, CM_AUXOSC); + /* This locks the CM again */ + writel(0, CM_LOCK); +} + +static const struct icst_params cp_auxvco_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, + .vd_min = 8, + .vd_max = 263, + .rd_min = 3, + .rd_max = 65, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, +}; + +static const struct clk_icst_desc __initdata cp_icst_desc = { + .params = &cp_auxvco_params, + .getvco = cp_auxvco_get, + .setvco = cp_auxvco_set, +}; + +/* + * integrator_clk_init() - set up the integrator clock tree + * @is_cp: pass true if it's the Integrator/CP else AP is assumed + */ +void __init integrator_clk_init(bool is_cp) +{ + struct clk *clk; + + /* APB clock dummy */ + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + /* UART reference clock */ + clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT, + 14745600); + clk_register_clkdev(clk, NULL, "uart0"); + clk_register_clkdev(clk, NULL, "uart1"); + if (is_cp) + clk_register_clkdev(clk, NULL, "mmci"); + + /* 24 MHz clock */ + clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT, + 24000000); + clk_register_clkdev(clk, NULL, "kmi0"); + clk_register_clkdev(clk, NULL, "kmi1"); + if (!is_cp) + clk_register_clkdev(clk, NULL, "ap_timer"); + + if (!is_cp) + return; + + /* 1 MHz clock */ + clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT, + 1000000); + clk_register_clkdev(clk, NULL, "sp804"); + + /* ICST VCO clock used on the Integrator/CP CLCD */ + clk = icst_clk_register(NULL, &cp_icst_desc); + clk_register_clkdev(clk, NULL, "clcd"); +} |