Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "New SoC specific drivers:

   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware

   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).

  Reset subsystem, merged through arm-soc by tradition:

   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
     SoCs

   - Various subsystem-wide cleanups

  Updates for existing SoC-specific drivers

   - TI GPMC (General Purpose Memory Controller)

   - Mediatek "scpsys" system controller support for MT6797

   - Broadcom "brcmstb_gisb" bus arbitrer

   - ARM SCPI firmware

   - Renesas "SYSC" system controller

  One more driver update was submitted for the Freescale/NXP DPAA data
  path acceleration that has previously been used on PowerPC chips. I
  ended up postponing the merge until some API questions for its unusual
  MMIO access are resolved"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  clocksource: owl: Add S900 support
  clocksource: Add Owl timer
  soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
  firmware: tegra: Fix locking bugs in BPMP
  soc/tegra: flowctrl: Fix error handling
  soc/tegra: bpmp: Implement generic PM domains
  soc/tegra: bpmp: Update ABI header
  PM / Domains: Allow overriding the ->xlate() callback
  soc: brcmstb: enable drivers for ARM64 and BMIPS
  soc: renesas: Rework Kconfig and Makefile logic
  reset: Add the TI SCI reset driver
  dt-bindings: reset: Add TI SCI reset binding
  reset: use kref for reference counting
  soc: qcom: smsm: Improve error handling, quiesce probe deferral
  cpufreq: scpi: use new scpi_ops functions to remove duplicate code
  firmware: arm_scpi: add support to populate OPPs and get transition latency
  dt-bindings: reset: Add reset manager offsets for Stratix10
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon
  reset: Add a Gemini reset controller
  ...

3 files changed, 180 insertions, 0 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 88818a43d6e9..fcae5ca6ac92 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -103,6 +103,13 @@ config ORION_TIMER
 	help
 	  Enables the support for the Orion timer driver
 
+config OWL_TIMER
+	bool "Owl timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables the support for the Actions Semi Owl timer driver.
+
 config SUN4I_TIMER
 	bool "Sun4i timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 72bfd001cfbb..6df949402dfc 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_CLKSRC_PISTACHIO)	+= time-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
 obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
 obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
+obj-$(CONFIG_OWL_TIMER)		+= owl-timer.o
 
 obj-$(CONFIG_ARC_TIMERS)		+= arc_timer.o
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
diff --git a/drivers/clocksource/owl-timer.c b/drivers/clocksource/owl-timer.c
new file mode 100644
index 000000000000..d19c53c11094
--- /dev/null
+++ b/drivers/clocksource/owl-timer.c
@@ -0,0 +1,172 @@
+/*
+ * Actions Semi Owl timer
+ *
+ * Copyright 2012 Actions Semi Inc.
+ * Author: Actions Semi, Inc.
+ *
+ * Copyright (c) 2017 SUSE Linux GmbH
+ * Author: Andreas Färber
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define OWL_Tx_CTL		0x0
+#define OWL_Tx_CMP		0x4
+#define OWL_Tx_VAL		0x8
+
+#define OWL_Tx_CTL_PD		BIT(0)
+#define OWL_Tx_CTL_INTEN	BIT(1)
+#define OWL_Tx_CTL_EN		BIT(2)
+
+static void __iomem *owl_timer_base;
+static void __iomem *owl_clksrc_base;
+static void __iomem *owl_clkevt_base;
+
+static inline void owl_timer_reset(void __iomem *base)
+{
+	writel(0, base + OWL_Tx_CTL);
+	writel(0, base + OWL_Tx_VAL);
+	writel(0, base + OWL_Tx_CMP);
+}
+
+static inline void owl_timer_set_enabled(void __iomem *base, bool enabled)
+{
+	u32 ctl = readl(base + OWL_Tx_CTL);
+
+	/* PD bit is cleared when set */
+	ctl &= ~OWL_Tx_CTL_PD;
+
+	if (enabled)
+		ctl |= OWL_Tx_CTL_EN;
+	else
+		ctl &= ~OWL_Tx_CTL_EN;
+
+	writel(ctl, base + OWL_Tx_CTL);
+}
+
+static u64 notrace owl_timer_sched_read(void)
+{
+	return (u64)readl(owl_clksrc_base + OWL_Tx_VAL);
+}
+
+static int owl_timer_set_state_shutdown(struct clock_event_device *evt)
+{
+	owl_timer_set_enabled(owl_clkevt_base, false);
+
+	return 0;
+}
+
+static int owl_timer_set_state_oneshot(struct clock_event_device *evt)
+{
+	owl_timer_reset(owl_clkevt_base);
+
+	return 0;
+}
+
+static int owl_timer_tick_resume(struct clock_event_device *evt)
+{
+	return 0;
+}
+
+static int owl_timer_set_next_event(unsigned long evt,
+				    struct clock_event_device *ev)
+{
+	void __iomem *base = owl_clkevt_base;
+
+	owl_timer_set_enabled(base, false);
+	writel(OWL_Tx_CTL_INTEN, base + OWL_Tx_CTL);
+	writel(0, base + OWL_Tx_VAL);
+	writel(evt, base + OWL_Tx_CMP);
+	owl_timer_set_enabled(base, true);
+
+	return 0;
+}
+
+static struct clock_event_device owl_clockevent = {
+	.name			= "owl_tick",
+	.rating			= 200,
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_DYNIRQ,
+	.set_state_shutdown	= owl_timer_set_state_shutdown,
+	.set_state_oneshot	= owl_timer_set_state_oneshot,
+	.tick_resume		= owl_timer_tick_resume,
+	.set_next_event		= owl_timer_set_next_event,
+};
+
+static irqreturn_t owl_timer1_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+	writel(OWL_Tx_CTL_PD, owl_clkevt_base + OWL_Tx_CTL);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init owl_timer_init(struct device_node *node)
+{
+	struct clk *clk;
+	unsigned long rate;
+	int timer1_irq, ret;
+
+	owl_timer_base = of_io_request_and_map(node, 0, "owl-timer");
+	if (IS_ERR(owl_timer_base)) {
+		pr_err("Can't map timer registers");
+		return PTR_ERR(owl_timer_base);
+	}
+
+	owl_clksrc_base = owl_timer_base + 0x08;
+	owl_clkevt_base = owl_timer_base + 0x14;
+
+	timer1_irq = of_irq_get_byname(node, "timer1");
+	if (timer1_irq <= 0) {
+		pr_err("Can't parse timer1 IRQ");
+		return -EINVAL;
+	}
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	rate = clk_get_rate(clk);
+
+	owl_timer_reset(owl_clksrc_base);
+	owl_timer_set_enabled(owl_clksrc_base, true);
+
+	sched_clock_register(owl_timer_sched_read, 32, rate);
+	clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
+			      rate, 200, 32, clocksource_mmio_readl_up);
+
+	owl_timer_reset(owl_clkevt_base);
+
+	ret = request_irq(timer1_irq, owl_timer1_interrupt, IRQF_TIMER,
+			  "owl-timer", &owl_clockevent);
+	if (ret) {
+		pr_err("failed to request irq %d\n", timer1_irq);
+		return ret;
+	}
+
+	owl_clockevent.cpumask = cpumask_of(0);
+	owl_clockevent.irq = timer1_irq;
+
+	clockevents_config_and_register(&owl_clockevent, rate,
+					0xf, 0xffffffff);
+
+	return 0;
+}
+CLOCKSOURCE_OF_DECLARE(owl_s500, "actions,s500-timer", owl_timer_init);
+CLOCKSOURCE_OF_DECLARE(owl_s900, "actions,s900-timer", owl_timer_init);