summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorViresh Kumar <viresh.kumar@linaro.org>2014-09-09 16:28:03 +0200
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2014-10-03 15:37:54 +0200
commitbbcf071969b20f356877c8067986be0a2dcaa2aa (patch)
tree56c887ddf156924bcf86716690f51080ebdbfc21 /drivers/cpufreq
parentcpufreq: ppc-corenet: remove duplicate update of cpu_data (diff)
downloadlinux-bbcf071969b20f356877c8067986be0a2dcaa2aa.tar.xz
linux-bbcf071969b20f356877c8067986be0a2dcaa2aa.zip
cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
The naming convention of this driver was always under the scanner, people complained that it should have a more generic name than cpu0, as it manages all CPUs that are sharing clock lines. Also, in future it will be modified to support any number of clusters with separate clock/voltage lines. Lets rename it to 'cpufreq_dt' from 'cpufreq_cpu0'. Tested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/Kconfig8
-rw-r--r--drivers/cpufreq/Kconfig.arm2
-rw-r--r--drivers/cpufreq/Makefile2
-rw-r--r--drivers/cpufreq/cpufreq-dt.c (renamed from drivers/cpufreq/cpufreq-cpu0.c)38
-rw-r--r--drivers/cpufreq/exynos4210-cpufreq.c2
-rw-r--r--drivers/cpufreq/exynos4x12-cpufreq.c2
-rw-r--r--drivers/cpufreq/exynos5250-cpufreq.c2
-rw-r--r--drivers/cpufreq/highbank-cpufreq.c6
-rw-r--r--drivers/cpufreq/s5pv210-cpufreq.c2
9 files changed, 32 insertions, 32 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index ffe350f86bca..3489f8f5fada 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -183,14 +183,14 @@ config CPU_FREQ_GOV_CONSERVATIVE
If in doubt, say N.
-config GENERIC_CPUFREQ_CPU0
- tristate "Generic CPU0 cpufreq driver"
+config CPUFREQ_DT
+ tristate "Generic DT based cpufreq driver"
depends on HAVE_CLK && OF
- # if CPU_THERMAL is on and THERMAL=m, CPU0 cannot be =y:
+ # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
depends on !CPU_THERMAL || THERMAL
select PM_OPP
help
- This adds a generic cpufreq driver for CPU0 frequency management.
+ This adds a generic DT based cpufreq driver for frequency management.
It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
systems which share clock and voltage across all CPUs.
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 7364a538e056..48ed28b789f7 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -92,7 +92,7 @@ config ARM_EXYNOS_CPU_FREQ_BOOST_SW
config ARM_HIGHBANK_CPUFREQ
tristate "Calxeda Highbank-based"
- depends on ARCH_HIGHBANK && GENERIC_CPUFREQ_CPU0 && REGULATOR
+ depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
default m
help
This adds the CPUFreq driver for Calxeda Highbank SoC
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index db6d9a2fea4d..40c53dc1937e 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
-obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o
+obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
##################################################################################
# x86 drivers.
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-dt.c
index a5f8c5f5f4f4..e00265066a75 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -4,7 +4,7 @@
* Copyright (C) 2014 Linaro.
* Viresh Kumar <viresh.kumar@linaro.org>
*
- * The OPP code in function cpu0_set_target() is reused from
+ * The OPP code in function set_target() is reused from
* drivers/cpufreq/omap-cpufreq.c
*
* This program is free software; you can redistribute it and/or modify
@@ -35,7 +35,7 @@ struct private_data {
unsigned int voltage_tolerance; /* in percentage */
};
-static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
+static int set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct dev_pm_opp *opp;
struct cpufreq_frequency_table *freq_table = policy->freq_table;
@@ -176,7 +176,7 @@ try_again:
return ret;
}
-static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
+static int cpufreq_init(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *freq_table;
struct thermal_cooling_device *cdev;
@@ -287,7 +287,7 @@ out_put_reg_clk:
return ret;
}
-static int cpu0_cpufreq_exit(struct cpufreq_policy *policy)
+static int cpufreq_exit(struct cpufreq_policy *policy)
{
struct private_data *priv = policy->driver_data;
@@ -301,18 +301,18 @@ static int cpu0_cpufreq_exit(struct cpufreq_policy *policy)
return 0;
}
-static struct cpufreq_driver cpu0_cpufreq_driver = {
+static struct cpufreq_driver dt_cpufreq_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
- .target_index = cpu0_set_target,
+ .target_index = set_target,
.get = cpufreq_generic_get,
- .init = cpu0_cpufreq_init,
- .exit = cpu0_cpufreq_exit,
- .name = "generic_cpu0",
+ .init = cpufreq_init,
+ .exit = cpufreq_exit,
+ .name = "cpufreq-dt",
.attr = cpufreq_generic_attr,
};
-static int cpu0_cpufreq_probe(struct platform_device *pdev)
+static int dt_cpufreq_probe(struct platform_device *pdev)
{
struct device *cpu_dev;
struct regulator *cpu_reg;
@@ -334,30 +334,30 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
if (!IS_ERR(cpu_reg))
regulator_put(cpu_reg);
- ret = cpufreq_register_driver(&cpu0_cpufreq_driver);
+ ret = cpufreq_register_driver(&dt_cpufreq_driver);
if (ret)
dev_err(cpu_dev, "failed register driver: %d\n", ret);
return ret;
}
-static int cpu0_cpufreq_remove(struct platform_device *pdev)
+static int dt_cpufreq_remove(struct platform_device *pdev)
{
- cpufreq_unregister_driver(&cpu0_cpufreq_driver);
+ cpufreq_unregister_driver(&dt_cpufreq_driver);
return 0;
}
-static struct platform_driver cpu0_cpufreq_platdrv = {
+static struct platform_driver dt_cpufreq_platdrv = {
.driver = {
- .name = "cpufreq-cpu0",
+ .name = "cpufreq-dt",
.owner = THIS_MODULE,
},
- .probe = cpu0_cpufreq_probe,
- .remove = cpu0_cpufreq_remove,
+ .probe = dt_cpufreq_probe,
+ .remove = dt_cpufreq_remove,
};
-module_platform_driver(cpu0_cpufreq_platdrv);
+module_platform_driver(dt_cpufreq_platdrv);
MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
-MODULE_DESCRIPTION("Generic CPU0 cpufreq driver");
+MODULE_DESCRIPTION("Generic cpufreq driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index 61a54310a1b9..843ec824fd91 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -127,7 +127,7 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock");
if (!np) {
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 351a2074cfea..9e78a850e29f 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -174,7 +174,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
if (!np) {
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index c91ce69dc631..3eafdc7ba787 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -153,7 +153,7 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
if (!np) {
diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c
index bf8902a0866d..ec399ad2f059 100644
--- a/drivers/cpufreq/highbank-cpufreq.c
+++ b/drivers/cpufreq/highbank-cpufreq.c
@@ -6,7 +6,7 @@
* published by the Free Software Foundation.
*
* This driver provides the clk notifier callbacks that are used when
- * the cpufreq-cpu0 driver changes to frequency to alert the highbank
+ * the cpufreq-dt driver changes to frequency to alert the highbank
* EnergyCore Management Engine (ECME) about the need to change
* voltage. The ECME interfaces with the actual voltage regulators.
*/
@@ -60,7 +60,7 @@ static struct notifier_block hb_cpufreq_clk_nb = {
static int hb_cpufreq_driver_init(void)
{
- struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+ struct platform_device_info devinfo = { .name = "cpufreq-dt", };
struct device *cpu_dev;
struct clk *cpu_clk;
struct device_node *np;
@@ -95,7 +95,7 @@ static int hb_cpufreq_driver_init(void)
goto out_put_node;
}
- /* Instantiate cpufreq-cpu0 */
+ /* Instantiate cpufreq-dt */
platform_device_register_full(&devinfo);
out_put_node:
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 3f9791f07b8e..567caa6313ff 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -597,7 +597,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
* and dependencies on platform headers. It is necessary to enable
* S5PV210 multi-platform support and will be removed together with
* this whole driver as soon as S5PV210 gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock");
if (!np) {