crypto: s5p-sss - Fix spinlock recursion on LRW(AES)

Running TCRYPT with LRW compiled causes spinlock recursion:

    testing speed of async lrw(aes) (lrw(ecb-aes-s5p)) encryption
    tcrypt: test 0 (256 bit key, 16 byte blocks): 19007 operations in 1 seconds (304112 bytes)
    tcrypt: test 1 (256 bit key, 64 byte blocks): 15753 operations in 1 seconds (1008192 bytes)
    tcrypt: test 2 (256 bit key, 256 byte blocks): 14293 operations in 1 seconds (3659008 bytes)
    tcrypt: test 3 (256 bit key, 1024 byte blocks): 11906 operations in 1 seconds (12191744 bytes)
    tcrypt: test 4 (256 bit key, 8192 byte blocks):
    BUG: spinlock recursion on CPU#1, irq/84-10830000/89
     lock: 0xeea99a68, .magic: dead4ead, .owner: irq/84-10830000/89, .owner_cpu: 1
    CPU: 1 PID: 89 Comm: irq/84-10830000 Not tainted 4.11.0-rc1-00001-g897ca6d0800d #559
    Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
    [<c010e1ec>] (unwind_backtrace) from [<c010ae1c>] (show_stack+0x10/0x14)
    [<c010ae1c>] (show_stack) from [<c03449c0>] (dump_stack+0x78/0x8c)
    [<c03449c0>] (dump_stack) from [<c015de68>] (do_raw_spin_lock+0x11c/0x120)
    [<c015de68>] (do_raw_spin_lock) from [<c0720110>] (_raw_spin_lock_irqsave+0x20/0x28)
    [<c0720110>] (_raw_spin_lock_irqsave) from [<c0572ca0>] (s5p_aes_crypt+0x2c/0xb4)
    [<c0572ca0>] (s5p_aes_crypt) from [<bf1d8aa4>] (do_encrypt+0x78/0xb0 [lrw])
    [<bf1d8aa4>] (do_encrypt [lrw]) from [<bf1d8b00>] (encrypt_done+0x24/0x54 [lrw])
    [<bf1d8b00>] (encrypt_done [lrw]) from [<c05732a0>] (s5p_aes_complete+0x60/0xcc)
    [<c05732a0>] (s5p_aes_complete) from [<c0573440>] (s5p_aes_interrupt+0x134/0x1a0)
    [<c0573440>] (s5p_aes_interrupt) from [<c01667c4>] (irq_thread_fn+0x1c/0x54)
    [<c01667c4>] (irq_thread_fn) from [<c0166a98>] (irq_thread+0x12c/0x1e0)
    [<c0166a98>] (irq_thread) from [<c0136a28>] (kthread+0x108/0x138)
    [<c0136a28>] (kthread) from [<c0107778>] (ret_from_fork+0x14/0x3c)

Interrupt handling routine was calling req->base.complete() under
spinlock.  In most cases this wasn't fatal but when combined with some
of the cipher modes (like LRW) this caused recursion - starting the new
encryption (s5p_aes_crypt()) while still holding the spinlock from
previous round (s5p_aes_complete()).

Beside that, the s5p_aes_interrupt() error handling path could execute
two completions in case of error for RX and TX blocks.

Rewrite the interrupt handling routine and the completion by:

1. Splitting the operations on scatterlist copies from
   s5p_aes_complete() into separate s5p_sg_done(). This still should be
   done under lock.
   The s5p_aes_complete() now only calls req->base.complete() and it has
   to be called outside of lock.

2. Moving the s5p_aes_complete() out of spinlock critical sections.
   In interrupt service routine s5p_aes_interrupts(), it appeared in few
   places, including error paths inside other functions called from ISR.
   This code was not so obvious to read so simplify it by putting the
   s5p_aes_complete() only within ISR level.

Reported-by: Nathan Royce <nroycea+kernel@gmail.com>
Cc: <stable@vger.kernel.org> # v4.10.x: 07de4bc88c crypto: s5p-sss - Fix completing
Cc: <stable@vger.kernel.org> # v4.10.x
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1 files changed, 82 insertions, 45 deletions

diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index a668286d62cb..1b9da3dc799b 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -270,7 +270,7 @@ static void s5p_sg_copy_buf(void *buf, struct scatterlist *sg,
 	scatterwalk_done(&walk, out, 0);
 }
 
-static void s5p_aes_complete(struct s5p_aes_dev *dev, int err)
+static void s5p_sg_done(struct s5p_aes_dev *dev)
 {
 	if (dev->sg_dst_cpy) {
 		dev_dbg(dev->dev,
@@ -281,8 +281,11 @@ static void s5p_aes_complete(struct s5p_aes_dev *dev, int err)
 	}
 	s5p_free_sg_cpy(dev, &dev->sg_src_cpy);
 	s5p_free_sg_cpy(dev, &dev->sg_dst_cpy);
+}
 
-	/* holding a lock outside */
+/* Calls the completion. Cannot be called with dev->lock hold. */
+static void s5p_aes_complete(struct s5p_aes_dev *dev, int err)
+{
 	dev->req->base.complete(&dev->req->base, err);
 	dev->busy = false;
 }
@@ -368,51 +371,44 @@ exit:
 }
 
 /*
- * Returns true if new transmitting (output) data is ready and its
- * address+length have to be written to device (by calling
- * s5p_set_dma_outdata()). False otherwise.
+ * Returns -ERRNO on error (mapping of new data failed).
+ * On success returns:
+ *  - 0 if there is no more data,
+ *  - 1 if new transmitting (output) data is ready and its address+length
+ *     have to be written to device (by calling s5p_set_dma_outdata()).
  */
-static bool s5p_aes_tx(struct s5p_aes_dev *dev)
+static int s5p_aes_tx(struct s5p_aes_dev *dev)
 {
-	int err = 0;
-	bool ret = false;
+	int ret = 0;
 
 	s5p_unset_outdata(dev);
 
 	if (!sg_is_last(dev->sg_dst)) {
-		err = s5p_set_outdata(dev, sg_next(dev->sg_dst));
-		if (err)
-			s5p_aes_complete(dev, err);
-		else
-			ret = true;
-	} else {
-		s5p_aes_complete(dev, err);
-
-		dev->busy = true;
-		tasklet_schedule(&dev->tasklet);
+		ret = s5p_set_outdata(dev, sg_next(dev->sg_dst));
+		if (!ret)
+			ret = 1;
 	}
 
 	return ret;
 }
 
 /*
- * Returns true if new receiving (input) data is ready and its
- * address+length have to be written to device (by calling
- * s5p_set_dma_indata()). False otherwise.
+ * Returns -ERRNO on error (mapping of new data failed).
+ * On success returns:
+ *  - 0 if there is no more data,
+ *  - 1 if new receiving (input) data is ready and its address+length
+ *     have to be written to device (by calling s5p_set_dma_indata()).
  */
-static bool s5p_aes_rx(struct s5p_aes_dev *dev)
+static int s5p_aes_rx(struct s5p_aes_dev *dev/*, bool *set_dma*/)
 {
-	int err;
-	bool ret = false;
+	int ret = 0;
 
 	s5p_unset_indata(dev);
 
 	if (!sg_is_last(dev->sg_src)) {
-		err = s5p_set_indata(dev, sg_next(dev->sg_src));
-		if (err)
-			s5p_aes_complete(dev, err);
-		else
-			ret = true;
+		ret = s5p_set_indata(dev, sg_next(dev->sg_src));
+		if (!ret)
+			ret = 1;
 	}
 
 	return ret;
@@ -422,33 +418,73 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
 {
 	struct platform_device *pdev = dev_id;
 	struct s5p_aes_dev *dev = platform_get_drvdata(pdev);
-	bool set_dma_tx = false;
-	bool set_dma_rx = false;
+	int err_dma_tx = 0;
+	int err_dma_rx = 0;
+	bool tx_end = false;
 	unsigned long flags;
 	uint32_t status;
+	int err;
 
 	spin_lock_irqsave(&dev->lock, flags);
 
+	/*
+	 * Handle rx or tx interrupt. If there is still data (scatterlist did not
+	 * reach end), then map next scatterlist entry.
+	 * In case of such mapping error, s5p_aes_complete() should be called.
+	 *
+	 * If there is no more data in tx scatter list, call s5p_aes_complete()
+	 * and schedule new tasklet.
+	 */
 	status = SSS_READ(dev, FCINTSTAT);
 	if (status & SSS_FCINTSTAT_BRDMAINT)
-		set_dma_rx = s5p_aes_rx(dev);
-	if (status & SSS_FCINTSTAT_BTDMAINT)
-		set_dma_tx = s5p_aes_tx(dev);
+		err_dma_rx = s5p_aes_rx(dev);
+
+	if (status & SSS_FCINTSTAT_BTDMAINT) {
+		if (sg_is_last(dev->sg_dst))
+			tx_end = true;
+		err_dma_tx = s5p_aes_tx(dev);
+	}
 
 	SSS_WRITE(dev, FCINTPEND, status);
 
-	/*
-	 * Writing length of DMA block (either receiving or transmitting)
-	 * will start the operation immediately, so this should be done
-	 * at the end (even after clearing pending interrupts to not miss the
-	 * interrupt).
-	 */
-	if (set_dma_tx)
-		s5p_set_dma_outdata(dev, dev->sg_dst);
-	if (set_dma_rx)
-		s5p_set_dma_indata(dev, dev->sg_src);
+	if (err_dma_rx < 0) {
+		err = err_dma_rx;
+		goto error;
+	}
+	if (err_dma_tx < 0) {
+		err = err_dma_tx;
+		goto error;
+	}
+
+	if (tx_end) {
+		s5p_sg_done(dev);
+
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		s5p_aes_complete(dev, 0);
+		dev->busy = true;
+		tasklet_schedule(&dev->tasklet);
+	} else {
+		/*
+		 * Writing length of DMA block (either receiving or
+		 * transmitting) will start the operation immediately, so this
+		 * should be done at the end (even after clearing pending
+		 * interrupts to not miss the interrupt).
+		 */
+		if (err_dma_tx == 1)
+			s5p_set_dma_outdata(dev, dev->sg_dst);
+		if (err_dma_rx == 1)
+			s5p_set_dma_indata(dev, dev->sg_src);
 
+		spin_unlock_irqrestore(&dev->lock, flags);
+	}
+
+	return IRQ_HANDLED;
+
+error:
+	s5p_sg_done(dev);
 	spin_unlock_irqrestore(&dev->lock, flags);
+	s5p_aes_complete(dev, err);
 
 	return IRQ_HANDLED;
 }
@@ -597,8 +633,9 @@ outdata_error:
 	s5p_unset_indata(dev);
 
 indata_error:
-	s5p_aes_complete(dev, err);
+	s5p_sg_done(dev);
 	spin_unlock_irqrestore(&dev->lock, flags);
+	s5p_aes_complete(dev, err);
 }
 
 static void s5p_tasklet_cb(unsigned long data)