Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
  ARM: mach-shmobile: specify CHCLR registers on SH7372
  dma: shdma: fix runtime PM: clear channel buffers on reset
  dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit
  dmaengine/ste_dma40: clear LNK on channel startup
  dmaengine: intel_mid_dma: remove legacy pm interface
  ASoC: mxs: correct 'direction' of device_prep_dma_cyclic
  dmaengine: intel_mid_dma: error path fix
  dmaengine: intel_mid_dma: locking and freeing fixes
  mtd: gpmi-nand: move to dma_transfer_direction
  mtd: fix compile error for gpmi-nand
  mmc: mxs-mmc: fix the dma_transfer_direction migration
  dmaengine: add DMA_TRANS_NONE to dma_transfer_direction
  dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels
  dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe
  dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.
  dma: mxs-dma: fix a typo in comment
  DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove
  video i.MX IPU: Fix display connections
  i.MX IPU DMA: Fix wrong burstsize settings
  dmaengine/ste_dma40: allow fixed physical channel
  ...

Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c}

The conflicts looked pretty trivial, but I'll ask people to verify them.

1 files changed, 22 insertions, 19 deletions

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 0698695e8bf9..8a281584458b 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -854,8 +854,10 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan,
 	int ret;
 
 	/* Check if we already have a channel */
-	if (plchan->phychan)
-		return 0;
+	if (plchan->phychan) {
+		ch = plchan->phychan;
+		goto got_channel;
+	}
 
 	ch = pl08x_get_phy_channel(pl08x, plchan);
 	if (!ch) {
@@ -880,21 +882,22 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan,
 			return -EBUSY;
 		}
 		ch->signal = ret;
-
-		/* Assign the flow control signal to this channel */
-		if (txd->direction == DMA_TO_DEVICE)
-			txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT;
-		else if (txd->direction == DMA_FROM_DEVICE)
-			txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT;
 	}
 
+	plchan->phychan = ch;
 	dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n",
 		 ch->id,
 		 ch->signal,
 		 plchan->name);
 
+got_channel:
+	/* Assign the flow control signal to this channel */
+	if (txd->direction == DMA_MEM_TO_DEV)
+		txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT;
+	else if (txd->direction == DMA_DEV_TO_MEM)
+		txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT;
+
 	plchan->phychan_hold++;
-	plchan->phychan = ch;
 
 	return 0;
 }
@@ -1102,10 +1105,10 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 
 	/* Transfer direction */
 	plchan->runtime_direction = config->direction;
-	if (config->direction == DMA_TO_DEVICE) {
+	if (config->direction == DMA_MEM_TO_DEV) {
 		addr_width = config->dst_addr_width;
 		maxburst = config->dst_maxburst;
-	} else if (config->direction == DMA_FROM_DEVICE) {
+	} else if (config->direction == DMA_DEV_TO_MEM) {
 		addr_width = config->src_addr_width;
 		maxburst = config->src_maxburst;
 	} else {
@@ -1136,7 +1139,7 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 	cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT;
 	cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT;
 
-	if (plchan->runtime_direction == DMA_FROM_DEVICE) {
+	if (plchan->runtime_direction == DMA_DEV_TO_MEM) {
 		plchan->src_addr = config->src_addr;
 		plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR |
 			pl08x_select_bus(plchan->cd->periph_buses,
@@ -1152,7 +1155,7 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 		"configured channel %s (%s) for %s, data width %d, "
 		"maxburst %d words, LE, CCTL=0x%08x\n",
 		dma_chan_name(chan), plchan->name,
-		(config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
+		(config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
 		addr_width,
 		maxburst,
 		cctl);
@@ -1322,7 +1325,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
 
 static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 		struct dma_chan *chan, struct scatterlist *sgl,
-		unsigned int sg_len, enum dma_data_direction direction,
+		unsigned int sg_len, enum dma_transfer_direction direction,
 		unsigned long flags)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
@@ -1354,10 +1357,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	 */
 	txd->direction = direction;
 
-	if (direction == DMA_TO_DEVICE) {
+	if (direction == DMA_MEM_TO_DEV) {
 		txd->cctl = plchan->dst_cctl;
 		slave_addr = plchan->dst_addr;
-	} else if (direction == DMA_FROM_DEVICE) {
+	} else if (direction == DMA_DEV_TO_MEM) {
 		txd->cctl = plchan->src_cctl;
 		slave_addr = plchan->src_addr;
 	} else {
@@ -1368,10 +1371,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	}
 
 	if (plchan->cd->device_fc)
-		tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER :
+		tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER :
 			PL080_FLOW_PER2MEM_PER;
 	else
-		tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER :
+		tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER :
 			PL080_FLOW_PER2MEM;
 
 	txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
@@ -1387,7 +1390,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 		list_add_tail(&dsg->node, &txd->dsg_list);
 
 		dsg->len = sg_dma_len(sg);
-		if (direction == DMA_TO_DEVICE) {
+		if (direction == DMA_MEM_TO_DEV) {
 			dsg->src_addr = sg_phys(sg);
 			dsg->dst_addr = slave_addr;
 		} else {